Premium Information is available for this item - Upgrade for $1 a day
5340-00-899-2865
Grooved Clamp Coupling
5340008992865 008992865 SAE-AS5355/1 35H14-3-338-1 8131A4M-338Z 57464-338B AS5355/1-13B MS27114-13B SAE AS5355
A metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER. View more Grooved Clamp Coupling
November 2023
16
Marketplace 5340-00-899-2865
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-899-2865 5+ Documents (More...)
MS27114-13B COUPLING,CLAMP,GROOVED 6 EA NS Request Quotation Updated Every Day 5340-00-899-2865 RQST
Grooved Clamp Coupling 5340008992865 SAE-AS5355/135H14-3-338-18131A4M-338Z57464-338BAS5355/1-13BMS27114
day Upgrade your Account Upgrade 5340-01-193-0346Grooved Clamp Coupling5340011930346 011930346 SAE-AS5355
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-899-2865 Grooved Clamp Coupling 5340008992865 day
/1 AS5355/1-18R 5H14-3-488-1 MS27114-18R 57464-488R AS5355/1 SAE AS5355 8132A4M-488Z A metal loop having
Grooved Clamp Coupling 5340008992865 day Upgrade your Account Upgrade 5340-00-899-2865Grooved Clamp
day Upgrade your Account Upgrade 5340-01-258-0342Grooved Clamp Coupling5340012580342 012580342 SAE-AS5355
day Upgrade your Account Upgrade 5340-01-197-6727Grooved Clamp Coupling5340011976727 011976727 SAE-AS5355
day Upgrade your Account Upgrade 5340-01-397-0895Grooved Clamp Coupling5340013970895 013970895 SAE-AS5355
day Upgrade your Account Upgrade 5340-01-258-0342Grooved Clamp Coupling5340012580342 012580342 SAE-AS5355
Restrictions 5340-00-899-2865
5340-00-899-2865 is a Grooved Clamp Coupling that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-00-899-2865
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- US Marine Corps (MC41)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5340-00-899-2865
- Part Number
- Manufacturer
- Status
- SAE-AS5355/1
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AS5355/1-13B
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- 35H14-3-338-1
- 72914 - Grimes Aerospace Company (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 8131A4M-338Z
- 14242 - Voss Industries, Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 57464-338B
- 00624 - Eaton Aeroquip Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS27114-13B
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS5355/1-13B
- 80205 - National Aerospace Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SAE AS5355
- 80205 - National Aerospace Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS5355/1-13B
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-899-2865
- Characteristic
- Specifications
- FIIG
- Specifications
- A25400
- Band Thickness [ALED]
- 0.040 Inches Nominal
- Band Width [ALEE]
- 0.950 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Grooved Retainer
- Height [HGTH]
- 0.271 Inches Minimum And 0.291 Inches Maximum
- Maximum Load Rating [AGCS]
- 14100.0 Pounds
- Nut Type [ALDS]
- Self-Locking Hexagon
- Included Angle In Deg [AKZZ]
- 40.0
- Inside Diameter [AARX]
- 3.500 Inches Minimum And 3.900 Inches Maximum
- Latch Style [AGPR]
- Double
- Material And Location [ANNQ]
- Steel, Mil-S-5059, Type 301, 1/4 Hard Band Err-100 Err-100
- Material And Location [ANNQ]
- Steel, Mil-S-6721, Comp Ti Segment Err-100 Err-100
- Retainer Thickness [ADTJ]
- 0.060 Inches Nominal
- Retainer Width [ALEB]
- 0.690 Inches Minimum And 0.810 Inches Maximum
- Root Width [ALEC]
- 0.197 Inches Minimum And 0.217 Inches Maximum
- Sealing Inner Liner [ALDW]
- Not Included
- Segment Quantity [ALDT]
- 3
- Shape [SHPE]
- Round
- Temp Rating [ABJH]
- -65.0 Deg Fahrenheit And 800.0 Deg Fahrenheit
DLA Procurement Analysis 5340-00-899-2865
Management Data 5340-00-899-2865
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- K
- Reserved
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5340-00-899-2865
Freight Information 5340-00-899-2865
5340-00-899-2865 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5340-00-899-2865 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5340-00-899-2865 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-899-2865 is not classified as a special type of cargo when transported by water. 5340-00-899-2865 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-899-2865
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 5340-00-899-2865 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: