Premium Information is available for this item - Upgrade for $1 a day
5340-00-794-1643
Rod End Clevis
5340007941643 007941643 2-13785-3
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION. View more Rod End Clevis
May 2023
24
Marketplace 5340-00-794-1643
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-794-1643 5+ Documents (More...)
Restrictions 5340-00-794-1643
5340-00-794-1643 is a Rod End Clevis that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5340-00-794-1643
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-00-794-1643
- US Air Force (FUGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FUKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9ZD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5340-00-794-1643
- Part Number
- Manufacturer
- Status
- 2-13785-3
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 2-13785-3
- 76080 - Carley Foundry Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 6Z232 - Uni-Cast, Llc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 64666 - H.M. Dunn Company, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 2M490 - Nassau Tool Works, Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 4K830 - Armstrong Mold Corporation (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 29183 - G. S. E. Dynamics, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 06DM5 - Infinity Fabrication, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 1SJ80 - Johnson Manufacturing, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 3W130 - Aurora Casting & Engineering, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 1DDX0 - Machine Specialties, Llc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 9J448 - Northwest Machining & Mfg., Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 79U29 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 3H683 - International Precision, Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 58255 - Kovatch Castings, Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 2B834 - Essner Manufacturing Lp (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 26993 - Danko Arlington, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 6Z056 - Cm Manufacturing Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 0R2T5 - Design/Ol, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 1FG56 - Hydromach Inc (Active)
- Secondary Buy
- Secondary Buy
- 2-13785-3
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2-13785-3
- 2Z987 - Htm Precision Machining, Inc. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-794-1643
- Characteristic
- Specifications
- FIIG
- Specifications
- A264A0
- Distance From Pivot Pinhole Center To Rod Connection End [AKYV]
- 2.130 Inches Nominal
- End Radius [ABPZ]
- 0.156 Inches Nominal
- Fork Span Width [AJSD]
- 0.100 Inches Minimum And 0.105 Inches Maximum
- Fork Arm Thickness [AKYW]
- 0.075 Inches Nominal
- Fork Depth [AKYX]
- 0.310 Inches Nominal
- Hole Diameter [AAUB]
- 0.128 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec Single Material Response Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches Rod Connection
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Shank Diameter [AAZE]
- 0.184 Inches Minimum And 0.190 Inches Maximum
- Shank Length [AATR]
- 1.750 Inches Nominal
- Overall Height [ABKW]
- 0.312 Inches Nominal
- Overall Width [ABMK]
- 0.250 Inches Nominal
- Style Designator [STYL]
- Clevis
- Thread Class [AAJD]
- 3A Rod Connection
- Thread Direction [AAJF]
- Right-Hand Rod Connection
- Thread Length [AASA]
- 1.000 Inches Nominal Rod Connection
- Thread Series Designator [THSD]
- Unf Rod Connection
Weapon Systems (WSDC) 5340-00-794-1643
DLA Procurement Analysis 5340-00-794-1643
Management Data 5340-00-794-1643
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- XE
- T-38 TALON
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-00-794-1643
Freight Information 5340-00-794-1643
5340-00-794-1643 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 094140. A Sub NMFC of X. It has a NMFC Description of CLEVISES IRON/STEEL. 5340-00-794-1643 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49240 which rates the freight between FCL and LCL. 5340-00-794-1643 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-794-1643 is not classified as a special type of cargo when transported by water. 5340-00-794-1643 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-794-1643
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-00-794-1643 1 Records
Contracting Technical Data File (CTDF) 5340-00-794-1643 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: