Premium Information is available for this item - Upgrade for $1 a day
5340-00-663-1477
Butt Hinge
5340006631477 006631477 BHMA-A156.20 FFH116 BHMA-A156.20 A81313 1-1/4IN ANSI A156.20 A8133
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side. View more Butt Hinge
November 2023
5
Marketplace 5340-00-663-1477
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-663-1477 5+ Documents (More...)
SC922 MS27972-26 BHMA-A156.20 A hinge whose leaves are greater in - A81221 FFH116 SC922 MS27972-26 BHMA-A156.20
- A81221 FFH116 SC922 MS27972-26 BHMA-A156.20 - A81221 FFH116 SC922 MS27972-26 BHMA-A156.20 A hinge whose
Butt Hinge 5340006631477 006631477 FFH116 BHMA-A156.20 A81313 1-1/4IN ANSI A156.20 A8133 A hinge
SC922 MS27972-26 BHMA-A156.20 - A81221 FFH116 SC922 MS27972-26 BHMA-A156.20 A hinge whose https//www.nsnlookup.com
Butt Hinge 5340006631477 006631477 FFH116BHMA-A156.20 A81313 1-1/4IN ANSI A156.20 A8133 A hinge
usually with rectangularly shaped leaves ANSI/ BHMA A156.20- A81221 FFH116 SC922 MS27972-26 BHMA-A156.20
Butt Hinge 5340006631477 006631477 FFH116 BHMA-A156.20 A81313 1-1/4IN ANSI A156.20 A8133 A hinge
- A81221 FFH116 SC922 MS27972 -26 BHMA-A156.20 https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-664
ANSI/ BHMA A156.20- A81221 FFH116 SC922 MS27972-26 BHMA-A156.20 A hinge whose leaves are greater in
- A81221 https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00- ANSI/ BHMA A156.20ANSI/ BHMA A156.20-
Restrictions 5340-00-663-1477
5340-00-663-1477 is a Butt Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-00-663-1477
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
Approved Sources 5340-00-663-1477
- Part Number
- Manufacturer
- Status
- BHMA-A156.20
- Manufacturer
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Incomplete Reference
- Incomplete Reference
- BHMA-A156.20 A81313 1-1/4IN
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Primary Buy
- Primary Buy
- FFH116
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- ANSI A156.20 A8133
- 80204 - American National Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-663-1477
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Body Width [ADAT]
- 2.500 Inches Nominal
- Hinge Mounting Type [AKER]
- Full Mortise
- Material Thickness [ABPX]
- 0.089 Inches Nominal
- Mounting Hole Diameter [ABTB]
- 0.169 Inches Nominal
- Mounting Hole Quantity [ABTJ]
- 6
- Nondefinitive Spec/Std Data [ZZZT]
- 2127 Type
- Knuckle Type [AKNB]
- Friction
- Knuckle Quantity [AKEX]
- 5
- Material And Location [ANNQ]
- Steel Pin And Steel, Wrought Body And Steel, Wrought Button Tip
- Pin Removability [AKES]
- Removable
- Pin Tip Style [AKEV]
- Flat Button
- Reversible Feature [AJNC]
- Not Included
- Rising Pin [AKET]
- Not Included
- Performance Type [AGLD]
- Regular Duty
- Pin Center To Body Edge Distance [AKFK]
- 1.250 Inches Nominal
- Style Designator [STYL]
- Butt
- Surface Treatment And Location [ANNR]
- Primed For Paint, Ff-H-116, Usp Body And Primed For Paint, Ff-H-116, Usp Button Tip
DLA Procurement Analysis 5340-00-663-1477
- Last Stock Position:
- 241 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-00-663-1477
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-00-663-1477
Freight Information 5340-00-663-1477
5340-00-663-1477 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095300. A Sub NMFC of Z. It has a NMFC Description of HINGES/BUTTS NOI I/S. 5340-00-663-1477 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49860 which rates the freight between FCL and LCL. 5340-00-663-1477 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-663-1477 is not classified as a special type of cargo when transported by water. 5340-00-663-1477 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-663-1477
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-00-663-1477 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: