Premium Information is available for this item - Upgrade for $1 a day
5340-00-229-4359
Butt Hinge
5340002294359 002294359 BHMA-A156.1 FFH116 BHMA-A156.1 A2133 3-1/2IN ANSI A156.1 A2133
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side. View more Butt Hinge
Managed by United States
NSN Created on 1 Jan 1963
Data Last Changed
November 2023
November 2023
NATO Update Count
9
9
NATO Data Quality
Marketplace 5340-00-229-4359
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-229-4359 5+ Documents (More...)
BHMA-A156.1 FFH116 BHMA-A156.1 A2133 3-1/2IN ANSI A156.1 A2133 A hinge usually with rectangularly shaped
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI American National A8133 BHMA-A156.1 A8133
BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 https//www.nsnlookup.com /fsg-53/fsc-
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI American National A8133 BHMA-A156.1 A8133
BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 https//www.nsnlookup.com /fsg-53/fsc-
ANSI 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National A8133 BHMA-A156.1
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National
ANSI A156.1 A8133 80204 - American National A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National
ANSI A156.1 A8133 80204 - American National A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116
BHMA-A156.1 A2133 3-1/2IN ANSI A156.1 A2133 A hinge usually with rectangularly shaped leaves.
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116
BHMA-A156.1 A2133 3-1/2IN ANSI A156.1 A2133 A hinge usually with rectangularly shaped leaves.
A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 A8133 BHMA-A156.1 A8133 A8133 3-1/2IN
/fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116 BHMA-A156.1 A2133 3-1
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI American National A8133 BHMA-A156.1 A8133
/fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116 BHMA-A156.1 A2133 3-1
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI American National A8133 BHMA-A156.1 A8133
A2112 4-1/2IN A156.1 A2112 FFH116 A hinge usually with rectangularly shaped leaves.
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116
A8133 BHMA-A156.1 A8133 3-1/2IN ANSI A156.1 A8133 FFH116 ANSI A156.1 A8133 80204 - American National
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-229-4359 Butt Hinge 5340002294359 002294359 FFH116
Restrictions 5340-00-229-4359
5340-00-229-4359 is a Butt Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-00-229-4359
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Supplementary Collaborators:
- GT
Approved Sources 5340-00-229-4359
- Part Number
- Manufacturer
- Status
- BHMA-A156.1
- Manufacturer
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Incomplete Reference
- Incomplete Reference
- BHMA-A156.1 A2133 3-1/2IN
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Primary Buy
- Primary Buy
- FFH116
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- ANSI A156.1 A2133
- 80204 - American National Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-229-4359
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Body Width [ADAT]
- 3.500 Inches Nominal
- Hinge Mounting Type [AKER]
- Full Mortise
- Material Thickness [ABPX]
- 0.123 Inches Nominal
- Mounting Hole Diameter [ABTB]
- 0.193 Inches Nominal
- Mounting Hole Quantity [ABTJ]
- 6
- Nondefinitive Spec/Std Data [ZZZT]
- 2122 Type
- Knuckle Type [AKNB]
- Bushing
- Knuckle Quantity [AKEX]
- 5
- Material And Location [ANNQ]
- Bronze, Wrought Body And Bronze, Wrought Button Tip And Steel, Corrosion Resisting Bushing And Steel, Corrosion Resisting Pin
- Reversible Feature [AJNC]
- Not Included
- Rising Pin [AKET]
- Not Included
- Performance Type [AGLD]
- Regular Duty
- Pin Center To Body Edge Distance [AKFK]
- 1.750 Inches Nominal
- Pin Removability [AKES]
- Removable
- Pin Tip Style [AKEV]
- Flat Button
- Style Designator [STYL]
- Butt
- Surface Treatment And Location [ANNR]
- Lacquer Body And Lacquer Button Tip
DLA Procurement Analysis 5340-00-229-4359
- Last Stock Position:
- 76 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-00-229-4359
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-00-229-4359
5340-14-559-3282 5340-21-884-0710 5340-21-868-8795 5340-12-310-6756 5340-17-112-3163 5340-13-114-1043 5340-12-301-3819 5340-99-612-5594 5340-99-740-4705 5340-14-556-2574 5340-21-660-0210 5340-21-868-8248 5340-21-660-0242 5340-12-319-7902 5340-14-569-7928 5340-12-372-6723 5340-12-192-3143 5340-66-152-5104
Freight Information 5340-00-229-4359
5340-00-229-4359 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095290. A Sub NMFC of X. It has a NMFC Description of HINGES/BUTTS NOI METAL O/T I/S. 5340-00-229-4359 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49840 which rates the freight between FCL and LCL. 5340-00-229-4359 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-229-4359 is not classified as a special type of cargo when transported by water. 5340-00-229-4359 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-229-4359
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-00-229-4359 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: