Premium Information is available for this item - Upgrade for $1 a day
5340-00-190-6804
Retaining Strap
5340001906804 001906804 NASM21314 MS21314-10 NASM21314-10
A preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING. View more Retaining Strap
November 2023
17
Marketplace 5340-00-190-6804
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-190-6804 5+ Documents (More...)
MS21314-10 STRAP,RETAINING 733 EA NS Request Quotation NASM21314-10 STRAP,RETAINING 1022 EA NS Request
MS21314-10 STRAP,RETAINING 400 EA NS Request Quotation Updated Every Day 5340-00-190-6804 RQST NE Updated
MS21314-10 FF-S-760 A preformed item of rigid or semirigid material designed to partially surround other
Retaining Strap 5340001906804 001906804 MS21314-10NASM21314-10 A preformed item of rigid or semirigid
NASM21314-8 MS21314-8 A preformed item of rigid or semirigid material designed to partially surround
/fsg-53/fsc-5340/us 5340-00-190-6804 Retaining Strap 5340001906804 001906804 MS21314-10 NASM21314-10
-8 A preformed item of rigid or semirigid material designed to partially surround other items NASM21314
MS21314-10 NASM21314-10 A preformed item of rigid or semirigid material designed to partially surround
for $1 a day Upgrade your Account Upgrade 5340-01-111-3908Retaining Strap5340011113908 011113908 NASM21314
MS21314-10 FF-S-760 A preformed item of rigid or semirigid material designed to partially surround other
Restrictions 5340-00-190-6804
5340-00-190-6804 is a Retaining Strap that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-00-190-6804
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-00-190-6804
- US Army (A919)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A187
- US Coast Guard (C918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- C004
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXKZ
- NASA (G810)
- Effective Date:
- 1 Apr 1991
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTJNHD
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5340-00-190-6804
- Part Number
- Manufacturer
- Status
- NASM21314
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS21314-10
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NASM21314-10
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-190-6804
- Characteristic
- Specifications
- FIIG
- Specifications
- T372-A
- Cushion [BXQG]
- Not Included
- Distance Between Base And Inside Of Arch [BYMM]
- 1.125 Inches Nominal
- Distance Between Mounting Hole Centers [AFQM]
- 2.250 Inches Nominal
- Material Thickness [ABPX]
- 0.080 Inches Nominal
- Material [MATT]
- Steel,Fed Qq-S-636
- Mounting Hole Size [BYML]
- 0.281 Inches Nominal
- Mounting Pad [BXQJ]
- Not Included
- Nondefinitive Spec/Std Data [ZZZT]
- Part No. Ms21314-10
- Inside Diameter/Arch Length [BYMP]
- 1.125 Inches Nominal
- Overall Length [ABHP]
- 3.000 Inches Nominal
- Overall Width [ABMK]
- 0.750 Inches Nominal
- Style Designator [STYL]
- Curved Arch
- Surface Treatment [SFTT]
- Zinc
DLA Procurement Analysis 5340-00-190-6804
- Last Stock Position:
- 749 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-00-190-6804
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5340-00-190-6804
Freight Information 5340-00-190-6804
5340-00-190-6804 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5340-00-190-6804 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-00-190-6804 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-190-6804 is not classified as a special type of cargo when transported by water. 5340-00-190-6804 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-190-6804
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-00-190-6804 2 Records
Contracting Technical Data File (CTDF) 5340-00-190-6804 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: