Premium Information is available for this item - Upgrade for $1 a day
5340-00-190-6773
Retaining Strap
5340001906773 001906773 NASM760 NAS760 MS35140-23 FF-S-760 PTMC400
A preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING. View more Retaining Strap
November 2023
14
Marketplace 5340-00-190-6773
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5340-00-190-6773 5+ Documents (More...)
FF-S-760 STRAP,RETAINING 456 EA NS Request Quotation MS35140-23 STRAP,RETAINING 384 EA NS Request Quotation
PTMC400 STRAP,RETAINING 1022 EA NS Request Quotation NAS760 STRAP,RETAINING 456 EA NS Request Quotation
NASM760 FFS760 A preformed item of rigid or semirigid material designed to partially surround other
MS35140-23 STRAP 95 EA NS Request Quotation Subscribe to View Vendor Details...
NASM760 for $1 a day Upgrade your Account Upgrade 5340-00-190-6773Retaining Strap5340001906773 001906773
5340-00-057-4094 https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-190-6773 Retaining Strap 5340001906773
FF-S-760 MS35140-1 A preformed item of rigid or semirigid material designed to partially surround other
for $1 a day Upgrade your Account Upgrade 5340-00-655-7760Retaining Strap5340006557760 006557760 NASM760
167A33 NASM760-TYP1, STYB, 5/16 7418572 A preformed item of rigid or semirigid material designed
Retaining Strap 5340001906773 001906773 Account Upgrade 5340-00-190-6773Retaining Strap5340001906773
Restrictions 5340-00-190-6773
5340-00-190-6773 is a Retaining Strap that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 5340-00-190-6773
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
Approved Sources 5340-00-190-6773
- Part Number
- Manufacturer
- Status
- NASM760
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS35140-23
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS760
- 80205 - National Aerospace Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS35140-23
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- FF-S-760
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PTMC400
- 72629 - General Cable Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-190-6773
- Characteristic
- Specifications
- FIIG
- Specifications
- T372-A
- Center To Center Distance Between Arch And Mounting Hole [BYMR]
- 3.688 Inches Minimum And 3.812 Inches Maximum
- Cushion [BXQG]
- Not Included
- Distance Between Base And Inside Of Arch [BYMM]
- 4.438 Inches Minimum And 4.500 Inches Maximum
- Material Thickness [ABPX]
- 0.219 Inches Minimum And 0.281 Inches Maximum
- Material [MATT]
- Iron Cast Uns F22400
- Mounting Hole Size [BYML]
- 0.641 Inches Minimum And 0.687 Inches Maximum
- Mounting Pad [BXQJ]
- Not Included
- Nondefinitive Spec/Std Data [ZZZT]
- 1 Type And A Style
- Inside Diameter/Arch Length [BYMP]
- 4.500 Inches Minimum And 4.562 Inches Maximum
- Overall Length [ABHP]
- 8.625 Inches Minimum And 8.875 Inches Maximum
- Overall Width [ABMK]
- 1.875 Inches Minimum And 2.125 Inches Maximum
- Style Designator [STYL]
- Half Arch
- Surface Treatment [SFTT]
- Cadmium And Chromate Or Zinc And Chromate
DLA Procurement Analysis 5340-00-190-6773
Management Data 5340-00-190-6773
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-00-190-6773
Freight Information 5340-00-190-6773
5340-00-190-6773 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5340-00-190-6773 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-00-190-6773 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-190-6773 is not classified as a special type of cargo when transported by water. 5340-00-190-6773 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-190-6773
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-00-190-6773 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: