Premium Information is available for this item - Upgrade for $1 a day
5340-00-050-3081
Butt Hinge
5340000503081 000503081 BHMA-A156.1 BHMA-A156.1 A8173 3IN FFH116CTYPE2171H ANSI A156.1 A8173 ANSI A156.1 A8333 FF-H-116E TYPE 2171H
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side. View more Butt Hinge
November 2023
4
Marketplace 5340-00-050-3081
Request a Quotation from participating marketplace vendors
Related Documents 5340-00-050-3081 5+ Documents (More...)
United States (US) 4. 5340-00-050-3081 Marketplace Restrictions Approved Sources Datasheet Management
Every Day 5340-00-050-3081 RQST Updated Every Day 5340-00-050-3081 RQST NE Related Documents 5340-00
3IN FFH116CTYPE2171H ANSI A156.1 A8173 ANSI A156.1 A8333 FF-H-116E TYPE 2171H A hinge https//www.nsnlookup.com
/fsg-53/fsc-5340/us 5340-00-050-3081 Butt Hinge 5340000503081 000503081 Upgrade for $1 a day Upgrade
3IN FFH116CTYPE2171H ANSI A156.1 A8173 ANSI A156.1 A8333 FF-H-116E TYPE 2171H A hinge https//www.nsnlookup.com
/fsg-53/fsc-5340/us 5340-00-050-3081 Butt Hinge 5340000503081 000503081 Upgrade for $1 a day Upgrade
3IN FFH116CTYPE2171H ANSI A156.1 A8173 ANSI A156.1 A8333 FF-H-116E TYPE 2171H A hinge https//www.nsnlookup.com
/fsg-53/fsc-5340/us 5340-00-050-3081 Butt Hinge 5340000503081 000503081 Upgrade for $1 a day Upgrade
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-050-3081 Butt Hinge 5340000503081 000503081 Upgrade
for $1 a day Upgrade your Account Upgrade 5340-00-050-3081Butt Hinge5340000503081 000503081 BHMA-A156.1
Restrictions 5340-00-050-3081
5340-00-050-3081 is a Butt Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 5340-00-050-3081
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9ZD
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5340-00-050-3081
- Part Number
- Manufacturer
- Status
- BHMA-A156.1
- Manufacturer
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Incomplete Reference
- Incomplete Reference
- BHMA-A156.1 A8173 3IN
- 41280 - Builders Hardware Mfrs Assn Inc (Active)
- Primary Buy
- Primary Buy
- FFH116CTYPE2171H
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ANSI A156.1 A8173
- 80204 - American National Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ANSI A156.1 A8333
- 80204 - American National Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- FF-H-116E TYPE 2171H
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-00-050-3081
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Body Width [ADAT]
- 3.000 Inches Nominal
- Hinge Mounting Type [AKER]
- Full Surface
- Material Thickness [ABPX]
- 0.092 Inches Nominal
- Mounting Hole Diameter [ABTB]
- 0.169 Inches Nominal
- Mounting Hole Quantity [ABTJ]
- 6
- Knuckle Type [AKNB]
- Ball Bearing
- Knuckle Quantity [AKEX]
- 5
- Material And Location [ANNQ]
- Brass Pin And Steel, Wrought Body
- Reversible Feature [AJNC]
- Not Included
- Performance Type [AGLD]
- Not Rated
- Pin Center To Body Edge Distance [AKFK]
- 1.500 Inches Nominal
- Pin Removability [AKES]
- Nonremovable
- Style Designator [STYL]
- Butt
- Surface Treatment And Location [ANNR]
- Zinc Coated-Hot Dipped, Ff-H-116, Us2h Overall
DLA Procurement Analysis 5340-00-050-3081
Management Data 5340-00-050-3081
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-00-050-3081
Freight Information 5340-00-050-3081
5340-00-050-3081 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095300. A Sub NMFC of Z. It has a NMFC Description of HINGES/BUTTS NOI I/S. 5340-00-050-3081 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49860 which rates the freight between FCL and LCL. 5340-00-050-3081 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-00-050-3081 is not classified as a special type of cargo when transported by water. 5340-00-050-3081 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-00-050-3081
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-00-050-3081 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: