What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 36 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 36 of 1045

5340-01-494-3807
Multiple Angle Bracket

11 Feb 2002

5340-01-494-3616
Mounting Bracket

014943616
12992934: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-01-494-3594
Dust And Moisture Seal Boot

014943594
73128001: RNCC: 3 | RNVC: 2
73128001: RNCC: 5 | RNVC: 9

8 Feb 2002

5340-01-494-3227
Mounting Bracket

014943227
9399M77G01: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-01-494-1530
Mounting Bracket

014941530
11454080-1: RNCC: 3 | RNVC: 2
11454080-1: RNCC: 5 | RNVC: 2

1 Feb 2002

5340-01-494-0973
Overcurr Tripper

014940973
707641-A: RNCC: 3 | RNVC: 1

31 Jan 2002

5340-01-494-0978
Special Frame

014940978
707658-K1: RNCC: 3 | RNVC: 1
707658FIG8-25-13: RNCC: 5 | RNVC: 1

31 Jan 2002

5340-01-494-0969
Special Plunger

014940969
707622A: RNCC: 3 | RNVC: 1
704821PC26: RNCC: D | RNVC: 9

31 Jan 2002

5340-01-494-0107
Back Seat Lock

29 Jan 2002

5340-01-494-0090
Spring Load Handle

014940090
H594AL2RG: RNCC: 3 | RNVC: 9
H594AL2RG: RNCC: 5 | RNVC: 2

29 Jan 2002

5340-01-493-8916
Hinge

014938916
126858C: RNCC: 3 | RNVC: 2
126858C: RNCC: 5 | RNVC: 9

24 Jan 2002

5340-01-493-8679
Screw Thread Insert And Tool Assortment

014938679
S10012-5: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-01-493-8343
Butt Hinge Leaf

014938343
12B2819-39: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-01-493-6498
Bow Handle

014936498
1109-9: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-01-493-3238
Magnet Assembly

014933238
751-6726245-14: RNCC: 3 | RNVC: 2
211078322: RNCC: 5 | RNVC: 2
751-6408321-AY99: RNCC: 5 | RNVC: 2
DF2230-3160 ASSY-99: RNCC: 5 | RNVC: 2

27 Dec 2001

5340-01-493-3163
Mounting Plate

014933163
12367337-1: RNCC: 3 | RNVC: 2
12367337: RNCC: D | RNVC: 9

27 Dec 2001

5340-01-493-2327
Corner Brace

014932327
EMB24NA24A0036N: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2337
Angle Bracket

014932337
6279-14102-7: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2330
T Bracket

014932330
4628S31015-1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2331
Mending Plate

014932331
TAS8808-10BA1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2326
Electronic Equipment Hardware Kit

014932326
6276-64811-1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2325
Electronic Equipment Hardware Kit

014932325
6276-10303-1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2328
Mounting Plate

014932328
6276-10302-1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-493-2324
Electronic Equipment Hardware Kit

014932324
6276-64711-1: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-01-492-8108
Mounting Bracket

014928108
RIA149096: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-01-492-7723
Mounting Bracket

014927723
2310011-301: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-01-492-7702
Mounting Bracket

014927702
2310012-301: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-01-492-6508
Access Cover

014926508
646R746G01: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-01-492-5904
Webbing Strap

014925904
2200085-203: RNCC: 3 | RNVC: 2
2200085: RNCC: D | RNVC: 9

5 Dec 2001

5340-01-492-5893
Webbing Strap

014925893
2200085-202: RNCC: 3 | RNVC: 2
2200085: RNCC: D | RNVC: 9

5 Dec 2001

5340-01-492-5635
Cushioning Pad

014925635
40281-1: RNCC: 3 | RNVC: 2
81000-40265 ITEM 30: RNCC: 5 | RNVC: 2
81000-40265: RNCC: D | RNVC: 9

4 Dec 2001

5340-01-492-5546
Buckle

4 Dec 2001

5340-01-492-5261
Mounting Bracket

014925261
13442852-1: RNCC: 3 | RNVC: 2

3 Dec 2001

5340-01-492-5262
Mounting Bracket

014925262
13442852-2: RNCC: 3 | RNVC: 2

3 Dec 2001

5340-01-492-5136
Liquid Holding Unit Filler Neck

014925136
A-02-0092: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-01-492-3707
Headless Straight Rod

014923707
9054-C1-.080-.300: RNCC: 3 | RNVC: 2
DMYNO-84256-001: RNCC: 5 | RNVC: 9

26 Nov 2001

5340-01-492-3335
Access Door Hinge

014923335
204-031-467-9: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-01-492-3222
Furniture Glide

014923222
EL-186: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-01-492-2524
Access Cover

014922524
K671409-11: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-01-492-1879
Webbing Strap

014921879
2200085-201: RNCC: 3 | RNVC: 2
2200085: RNCC: D | RNVC: 9

16 Nov 2001

5340-01-492-0955
Caster Wheel

014920955
1052190: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-01-492-0105
Dust And Moisture Seal Protective Cap

014920105
1014661: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-01-491-9876
Angle Bracket

014919876
40944: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-01-491-9010
Mounting Bracket

014919010
7040-4020-04: RNCC: 3 | RNVC: 2
C-7040-4425: RNCC: 5 | RNVC: 2

5 Nov 2001

5340-01-491-9003
Rim Latch

014919003
7055-0166-33: RNCC: 3 | RNVC: 2
LATCH-001: RNCC: 5 | RNVC: 2
2-71-0074-08: RNCC: 5 | RNVC: 2
35092484: RNCC: 5 | RNVC: 2
35092484: RNCC: 5 | RNVC: 9

5 Nov 2001

5340-01-491-7432
Assembled Nut Retainer

014917432
5PTV7002BEM32V: RNCC: 3 | RNVC: 2
FTR-3-0-3-32-T: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-01-491-7331
Mechanical Stop

014917331
A8753: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-01-491-6727
Multiple Angle Bracket

014916727
B-2406-3: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-01-491-6212
Access Cover

014916212
9-1009: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-01-491-6030
Dust And Moisture Seal Boot

014916030
5PTE0093-1: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-01-491-5070
Dust And Moisture Seal Boot

014915070
5PTE0099-1: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-01-491-4945
Nut And Bolt Retainer

014914945
5PTV7002B4M14V: RNCC: 3 | RNVC: 2
FTR-4-0-3-14-T: RNCC: 5 | RNVC: 2

24 Oct 2001

5340-01-491-4691
Nut And Bolt Retainer

014914691
5PTV7002B3M16V: RNCC: 3 | RNVC: 2
FTR-3-0-3-16-T: RNCC: 5 | RNVC: 2

23 Oct 2001

5340-01-491-3316
Aircra Clamp Saddle

014913316
35209048: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-01-491-2691
Cover Strip

014912691
5-95599-37: RNCC: 3 | RNVC: 2
5-95599: RNCC: D | RNVC: 9

17 Oct 2001

5340-01-491-1981
Handle Center Brack

014911981
13C366: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-01-491-1743
Loop Clamp

014911743
SS7560H15FG: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-01-491-1556
Mounting Bracket

014911556
L5415755-003: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-01-491-1530
Mechanic Equipment Hardware Kit

014911530
FL-2605-34-2B: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-01-491-0457
Access Cover

014910457
6D00977H01: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-01-491-0133
Snap-In Threaded Standoff

014910133
4220330: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-01-491-0043
Access Cover

014910043
6D00976H01: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-01-490-9758
Mounting Bracket

014909758
606201-02: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-01-490-9681
Loop Clamp

014909681
M23190/2-1B: RNCC: 2 | RNVC: 2

5 Oct 2001

5340-01-490-7139
Mounting Bracket

014907139
35410-38: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-01-490-6705

3 Oct 2001

5340-01-490-5823
Access Cover

014905823
518R499H01: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-01-490-5098
Handwheel

014905098
12591394: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-01-490-4948
Bracket Assembly

014904948
6279-42511-1: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-01-490-4928
Structural Bracket

014904928
5HW82398-209: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-01-490-4943
Structural Bracket

014904943
5HM40424-137: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-01-490-4535
Double Angle Bracket

014904535
5HM40331-167: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-01-490-4012
Mounting Bracket

014904012
5HW82398-210: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3996
Mounting Plate

014903996
5HW82389-115: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3880
Dust And Moisture Seal Boot

014903880
5PTE0134-1: RNCC: 3 | RNVC: 2
5PTE0134: RNCC: 5 | RNVC: 9

26 Sep 2001

5340-01-490-3872
Dust And Moisture Seal Boot

014903872
5PTE0123-1: RNCC: 3 | RNVC: 2
5PTE0120-1: RNCC: 5 | RNVC: 9
5PTE0122-1: RNCC: 5 | RNVC: 9

26 Sep 2001

5340-01-490-3879
Dust And Moisture Seal Boot

014903879
5PTE0133-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3873
Dust And Moisture Seal Boot

014903873
5PTE0117-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3876
Dust And Moisture Seal Boot

014903876
5PTE0132-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3680
Dust And Moisture Seal Boot

014903680
5PTE0108-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3671
Dust And Moisture Seal Boot

014903671
5PTE0096-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3669
Dust And Moisture Seal Boot

014903669
5PTE0095-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3681
Dust And Moisture Seal Boot

014903681
5PTE0113-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3674
Dust And Moisture Seal Boot

014903674
5PTE0100-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3665
Dust And Moisture Seal Boot

014903665
5PTE0094-1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-01-490-3455
Nonmetallic Bumper

014903455
B50656: RNCC: 1 | RNVC: 2
2568: RNCC: 3 | RNVC: 2
92N4783: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-01-490-0910
Metallic Solid Wheel

014900910
D-7040-1421: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-01-490-0273
Access Cover

014900273
D-7050-8322: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-01-490-0243
Angle Bracket

014900243
C-7040-7009: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-01-489-5348
Section Block Clamp

014895348
5HP71251-101: RNCC: 3 | RNVC: 2

14 Sep 2001

5340-01-489-1617
Angle Bracket

014891617
6276-10300-1: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1695
Gang Channel Self-Locking Nut Assembly

014891695
5PTV7002B5K25V: RNCC: 3 | RNVC: 2
FTR-5-0-1-25-T: RNCC: 5 | RNVC: 2

13 Sep 2001

5340-01-489-1626
Corner Brace

014891626
6279-42511-5: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1622
Mounting Bracket

014891622
6276-64820-1: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1619
Angle Bracket

014891619
6276-10300-3: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1615
Mounting Bracket

014891615
6276-12111-1: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1616
Spring Tension Clip

014891616
S10156-1-05-18: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1614
Mounting Bracket

014891614
6276-12111-3: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-01-489-1048
Butter Valv Magnet

014891048
751-6408321-3: RNCC: 3 | RNVC: 2
754-6405243-8: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-01-488-8330
Mounting Bracket

014888330
2247040: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-01-488-8171
Gang Channel Self-Locking Nut Assembly

014888171
5PTV7002B5K35V: RNCC: 3 | RNVC: 2
FTR-5-0-1-35-T: RNCC: 5 | RNVC: 2

4 Sep 2001

5340-01-488-8162
Gang Channel Self-Locking Nut Assembly

014888162
5PTV7002B4K14V: RNCC: 3 | RNVC: 2
FTR-4-0-1-14-T: RNCC: 5 | RNVC: 2

4 Sep 2001

5340-01-488-5925
Flush Catch

014885925
TL18086-125-197: RNCC: 3 | RNVC: 2
H135P-1-125-197: RNCC: 3 | RNVC: 2
9D0017-125-197: RNCC: 7 | RNVC: 2

28 Aug 2001

5340-01-488-5460
Loop Clamp

014885460
MS21919CJ24: RNCC: 2 | RNVC: 2

28 Aug 2001

5340-01-488-5184
Loop Clamp

014885184
MS21919CJ14: RNCC: 2 | RNVC: 2

27 Aug 2001

5340-01-488-4776
Helical Compression Spring Retainer

014884776
2620-902X4ASSY18,0.500IN: RNCC: 3 | RNVC: 2

27 Aug 2001

5340-01-488-4467
Spacing Threaded Standoff

014884467
8219-A-0440HL-10: RNCC: 3 | RNVC: 2
8219-A-0440HL-10: RNCC: 5 | RNVC: 9

24 Aug 2001

5340-01-488-4206
Helical Compression Spring Retainer

014884206
2620-902X4ASSY18,0.250IN: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-488-3592
Coupling

014883592
AS1732D40: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-488-1836
Access Door Hinge

014881836
5HF75116-109: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-488-1523
Closeout

014881523
5HC13414-101: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-488-0185
Shaft Collar

23 Aug 2001

5340-01-488-0145
Nut And Bolt Retainer

014880145
5PTV7002B4M17V: RNCC: 3 | RNVC: 2
FTR-4-0-3-17-T: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-01-487-9598
T Bracket

014879598
5HV50131-105: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-487-9597
Mounting Bracket

014879597
5HV50131-101: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-01-487-9182
Mounting Bracket

014879182
5HM40327-155: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9199
Mounting Bracket

014879199
5HM40331-159: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9206
Mounting Bracket

014879206
5HM40327-205: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9233
Angle Bracket

014879233
5HM40327-191: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9229
Mounting Bracket

014879229
5HM40327-183: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9166
Mounting Bracket

014879166
5HM40330-125: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9235
Double Angle Bracket

014879235
5HM40331-153: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9165
Mounting Bracket

014879165
5HM40327-107: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9139
Mounting Bracket

014879139
5HM40326-151: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-8733
Plunger Bushing

014878733
MHC322: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9147
Angle Bracket

014879147
5HM40326-189: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9106
Mounting Bracket

014879106
5HM40324-139: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-9069
Angle Bracket

014879069
5HM40226-433: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-01-487-8844
Dust And Moisture Seal Protective Cap

014878844
A5054: RNCC: 3 | RNVC: 2
10847PTA5054: RNCC: D | RNVC: 9
1284351PC32: RNCC: D | RNVC: 9
1284352PC32: RNCC: D | RNVC: 9
MC 102PC32: RNCC: D | RNVC: 9
MC 103PC32: RNCC: D | RNVC: 9

22 Aug 2001

5340-01-487-8391
Multiple Angle Bracket

014878391
670424R: RNCC: 3 | RNVC: 2

20 Aug 2001

5340-01-487-8390
Multiple Angle Bracket

014878390
670424L: RNCC: 3 | RNVC: 2

20 Aug 2001

5340-01-487-7611
Mounting Bracket

014877611
G53394: RNCC: 3 | RNVC: 2
G95953: RNCC: D | RNVC: 9

16 Aug 2001

5340-01-487-7407
Extension Drawer Slide

014877407
409608-2: RNCC: 3 | RNVC: 2
409608-2: RNCC: 5 | RNVC: 9
409608-2: RNCC: C | RNVC: 1
409608: RNCC: D | RNVC: 9

16 Aug 2001

5340-01-487-5365
Access Cover

9 Aug 2001

5340-01-487-5294
Multiple Angle Bracket

014875294
5HP78230-103: RNCC: 3 | RNVC: 2

9 Aug 2001

5340-01-487-4655
Loop Clamp

7 Aug 2001

5340-01-487-4397
Access Cover

014874397
806706-0-01: RNCC: 3 | RNVC: 2
806706-0-01: RNCC: 5 | RNVC: 9

6 Aug 2001

5340-01-487-4395
Access Cover

014874395
806709-0-01: RNCC: 3 | RNVC: 2
806709-0-01: RNCC: 5 | RNVC: 9

6 Aug 2001

5340-01-487-4392
Access Cover

014874392
806665-0-01: RNCC: 3 | RNVC: 2
806665-0-01: RNCC: 5 | RNVC: 9

6 Aug 2001

5340-01-487-4383
Nut And Bolt Retainer

014874383
068052-0-02: RNCC: 3 | RNVC: 2
068052-0-02: RNCC: 5 | RNVC: 9

6 Aug 2001

5340-01-487-2560
Access Cover

014872560
K374042-11: RNCC: 3 | RNVC: 2

30 Jul 2001

5340-01-487-3090
Electronic Equipment Hardware Kit

014873090
17-02031-01: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-01-487-2889
Angle Bracket

014872889
13038359: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-01-487-1715
Mounting Bracket

014871715
6979ED7: RNCC: 3 | RNVC: 2

26 Jul 2001

5340-01-487-2582
Nut And Bolt Retainer

014872582
HS4172-428SK1: RNCC: 3 | RNVC: 2
HS4172-428SK1: RNCC: 5 | RNVC: 9

30 Jul 2001

5340-01-487-2421
Mounting Bracket

014872421
K884163-013: RNCC: 3 | RNVC: 2

30 Jul 2001

5340-01-487-1698
Mounting Bracket

014871698
6877ED18: RNCC: 3 | RNVC: 2

26 Jul 2001

5340-01-487-0998
Section Block Clamp

014870998
68B450071-205: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-01-486-6461
Extension Drawer Slide

014866461
54-12372P1: RNCC: 3 | RNVC: 1
54-12372: RNCC: 5 | RNVC: 1
97-1921PC63: RNCC: D | RNVC: 9
97-1249PC2: RNCC: D | RNVC: 9

10 Jul 2001

5340-01-486-6195
Access Cover

014866195
729409: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-01-486-4957
Line Assembly

014864957
371B867: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-01-486-4960
Loop Holder

014864960
371B461: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-01-486-4936
Clamping Catch

29 Jun 2001

5340-01-486-4316
Mounting Bracket

014864316
204-40718-1: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-01-486-4100
Lower Pad

014864100
6234545-001: RNCC: 3 | RNVC: 2
6234545: RNCC: 7 | RNVC: 2

28 Jun 2001

5340-01-486-3233
Extension Drawer Slide

014863233
1303401: RNCC: 3 | RNVC: 1
54-12374: RNCC: D | RNVC: 9
97-1276PC41: RNCC: D | RNVC: 9

26 Jun 2001

5340-01-486-3408
Latch Bar

014863408
17-21751-2: RNCC: 3 | RNVC: 1
97-1276PC57: RNCC: D | RNVC: 9
97-1921PC3: RNCC: D | RNVC: 9

26 Jun 2001

5340-01-486-3235
Extension Drawer Slide

014863235
3001736: RNCC: 3 | RNVC: 1
97-1276PC42: RNCC: D | RNVC: 9
54-12373: RNCC: D | RNVC: 9

26 Jun 2001

5340-01-486-2854
Mounting Plate

25 Jun 2001

5340-01-486-2771
Plate Mounting Driv

25 Jun 2001

5340-01-486-2455
Swivel Caster

22 Jun 2001

5340-01-486-1825
Swivel Caster

014861825
18202-002: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-01-486-1818
Spacing Threaded Standoff

014861818
NAS1786-08-8: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-01-486-1532
Angle Bracket Set

20 Jun 2001

5340-01-486-1450
Mechanical Stop

014861450
LJ-107664PC2.24: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-01-486-1018
Bolt And Spacer Kit

014861018
5HG40043-105: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-01-486-0475
Plug Orific

014860475
560X185-V: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-01-486-0254
Handle Strap

15 Jun 2001

5340-01-485-9753
Dolly Wheel Assy

13 Jun 2001

5340-01-485-9568
Mounting Bracket

014859568
9360466: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-01-485-9559
Retaining Strap

014859559
12592644: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-01-485-9360
Mechanic Equipment Hardware Kit

014859360
2CX764: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-01-485-8683
Swivel Caster

8 Jun 2001

5340-01-485-8411
Retaining Clip

8 Jun 2001

5340-01-485-8354
Spacing Threaded Standoff

8 Jun 2001

5340-01-485-7784
Dust And Moisture Seal Protective Cap

014857784
11-0102: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-01-485-6813

4 Jun 2001

5340-01-485-6460
Webbing Strap

1 Jun 2001

5340-01-485-4380
Rod End Clevis

25 May 2001

5340-01-485-4219
Spring Holder

014854219
9-196003-01: RNCC: 3 | RNVC: 2

24 May 2001

5340-01-485-4035
Rod End Clevis

24 May 2001

5340-01-485-3934
Mounting Bracket

014853934
4313999: RNCC: 3 | RNVC: 2

24 May 2001

5340-01-485-3922
Mounting Bracket

014853922
4317633: RNCC: 3 | RNVC: 2

24 May 2001

5340-01-485-3874
Self-Locking Insert

014853874
ST2933-10: RNCC: 1 | RNVC: 2
KH10077-4: RNCC: 3 | RNVC: 2
ST2923-10: RNCC: 5 | RNVC: 9
KH10077-4: RNCC: 5 | RNVC: 9

24 May 2001

5340-01-485-3681
Mounting Bracket

014853681
13038998: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3774
Vent Plug

014853774
F1R12-A70-0007R-001: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3750
Mounting Plate

014853750
13038633: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3698
Access Cover

014853698
13038527: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3688
Mounting Bracket

014853688
13219425: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3676
Access Cover

014853676
13038600: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3664
Mounting Bracket

014853664
13038595: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3660
Angle Bracket

014853660
13038539: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-3657
Dust And Moisture Seal Protective Cover

014853657
13038533: RNCC: 3 | RNVC: 2

23 May 2001

5340-01-485-2070
Access Cover

014852070
13219444: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1991
Mounting Bracket

014851991
13234972: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1944
Blank Panel

014851944
13219620: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1947
Angle Bracket

014851947
13219720: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1949
Mounting Plate And Gasket Assembly

014851949
13219724: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1940
Access Cover

014851940
13219446: RNCC: 3 | RNVC: 2

21 May 2001

5340-01-485-1805
Access Cover

014851805
13219202: RNCC: 3 | RNVC: 2

18 May 2001

5340-01-485-1786
Angle Bracket

014851786
13038358: RNCC: 3 | RNVC: 2

18 May 2001

5340-01-485-1789
Angle Bracket

014851789
13038360: RNCC: 3 | RNVC: 2

18 May 2001

5340-01-485-1785
Angle Bracket

014851785
13038357: RNCC: 3 | RNVC: 2

18 May 2001

5340-01-485-0993
Mounting Plate

014850993
106852003: RNCC: 3 | RNVC: 2

16 May 2001

5340-01-485-0277
Mounting Bracket

014850277
MSP64428B: RNCC: 3 | RNVC: 2

14 May 2001

5340-01-484-8953
Turnbuckle

014848953
218120: RNCC: 3 | RNVC: 2

10 May 2001

5340-01-484-8228
Bumper

014848228
4316704: RNCC: 3 | RNVC: 2

9 May 2001

5340-01-484-8098
Insert

9 May 2001

5340-01-484-7683
Manual Control Lever

014847683
07556002259: RNCC: 3 | RNVC: 2
20326PC30: RNCC: 5 | RNVC: 2

8 May 2001

5340-01-484-7093
Plastic Filler Block

014847093
5HG40045-103: RNCC: 3 | RNVC: 2
5HG40045-101: RNCC: 5 | RNVC: 2

4 May 2001

5340-01-484-6994
Plain Solid Disk

014846994
779-2105-001: RNCC: 3 | RNVC: 2
779-2105-001: RNCC: 5 | RNVC: 9

4 May 2001

5340-01-484-5868
Permanent Magnet

2 May 2001

5340-01-484-5551
Nonmetallic Bumper

1 May 2001

5340-01-484-5288
Spacing Threaded Standoff

014845288
5612899: RNCC: 3 | RNVC: 2

1 May 2001

5340-01-484-5430
Access Cover

014845430
475577-1: RNCC: 3 | RNVC: 2

1 May 2001

5340-01-484-4599
Mounting Bracket

30 Apr 2001

5340-01-484-4431
Mounting Bracket

014844431
4317619: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4456
Mounting Bracket

014844456
4317622: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4430
Mounting Bracket

014844430
4317617: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4434
Mounting Bracket

014844434
4317614: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4340
Catch Strike

014844340
K836767-011: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4337
Catch Strike

014844337
K836768-012: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4338
Catch Strike

014844338
K836768-011: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-01-484-4086
Rubber Mat

27 Apr 2001

5340-01-484-2768
Double Angle Bracket

014842768
12353407: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-01-484-2770
Mounting Plate

014842770
12352812: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-01-484-2769
Butt Hinge Leaf

014842769
12352784: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-01-484-2237
Spring Tension Clip

014842237
8100-1251-0308 PC NO 141: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-01-484-2109
Mending Plate

014842109
12352785: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-01-484-2088
Access Cover

014842088
778-1453-002: RNCC: 3 | RNVC: 2
778-1453-002: RNCC: 5 | RNVC: 2

23 Apr 2001

5340-01-484-1694
Loop Clamp

014841694
779-2519-001: RNCC: 3 | RNVC: 2
779-2519-001: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-01-484-1527
Access Cover

014841527
LSCP270203: RNCC: 3 | RNVC: 2

20 Apr 2001

5340-01-484-0976
Butt Hinge

014840976
MS20257-3-200: RNCC: 2 | RNVC: 2

18 Apr 2001

5340-01-484-0668
General Purpose Resilient Mount

014840668
C403-2: RNCC: 3 | RNVC: 2
C453092: RNCC: 7 | RNVC: 2

17 Apr 2001

5340-01-484-0667
Angle Bracket

014840667
C452871-02: RNCC: 3 | RNVC: 2

17 Apr 2001

5340-01-484-0500
Padlock

014840500
1176A85: RNCC: 3 | RNVC: 2
1176A85: RNCC: 5 | RNVC: 9

17 Apr 2001

5340-01-484-0228
Mechanical Latch

014840228
285937: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-01-483-9578
Beaded Handle Lh

12 Apr 2001

5340-01-483-9408
Mounting Bracket

014839408
PSN-BRK-001: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-01-483-9214
Angle Bracket

014839214
C452871-01: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-01-483-7914
Mounting Bracket

9 Apr 2001

5340-01-483-8255
Belt-Strap Keeper

014838255
44PB-134-4441: RNCC: 3 | RNVC: 2

9 Apr 2001

5340-01-483-7948
Dust And Moisture Seal Boot

014837948
217483: RNCC: 3 | RNVC: 2

9 Apr 2001

5340-01-483-7738
Mounting Plate

014837738
635R408H01: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-01-483-7670
Butt Hinge

6 Apr 2001

5340-01-483-7373
Spring Holder

5 Apr 2001

5340-01-483-6693
Extension Drawer Slide

014836693
1302465BL: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-01-483-6694
Extension Drawer Slide

014836694
1302465BR: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-01-483-6413
Mounting Plate

014836413
400167: RNCC: 3 | RNVC: 2
217536-19: RNCC: 5 | RNVC: 2

4 Apr 2001

5340-01-483-6328
Access Cover

014836328
135296-103: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-01-483-5896
Access Cover

014835896
249037: RNCC: 3 | RNVC: 1

3 Apr 2001

5340-01-483-5655
Dust And Moisture Seal Protective Cap Set

014835655
6702849-101: RNCC: 3 | RNVC: 9

2 Apr 2001

5340-01-483-5328
Self-Locking Insert

014835328
12592778: RNCC: 3 | RNVC: 2

30 Mar 2001

5340-01-483-5097
Rod End Clevis

014835097
218609: RNCC: 3 | RNVC: 2
217022: RNCC: 5 | RNVC: 9

30 Mar 2001

5340-01-483-4972
Mounting Bracket

30 Mar 2001

5340-01-483-4971
Mounting Bracket

30 Mar 2001

5340-01-483-4886
Bow Handle

014834886
10362-SS-1032-7: RNCC: 3 | RNVC: 2
10362-SS-1032-7: RNCC: 5 | RNVC: 9

29 Mar 2001

5340-01-483-4884
Bail Handle

014834884
11731-SS-3124-7: RNCC: 3 | RNVC: 2
11731-SS-3124-7: RNCC: 5 | RNVC: 9

29 Mar 2001

5340-01-483-4700
Air Compressor Base

29 Mar 2001

5340-01-483-4523
Mounting Bracket

7 May 2007

5340-01-483-4567
Manual Control Handle

29 Mar 2001

5340-01-483-3967

28 Mar 2001

5340-01-483-4208
Butt Hinge

014834208
90-2457-3007: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-01-483-4202
Butt Hinge

014834202
5-89301-3: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-01-483-3796
Access Cover

014833796
28-40181-0010: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-01-483-3494
Mounting Bracket

26 Mar 2001

5340-01-483-3487
Loop Clamp

014833487
BACC10CE10: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-01-483-2811
Plug Button

014832811
BACP20B21B: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-01-483-2338
Access Cover

014832338
65-19827-1: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-01-483-2156
Mounting Plate

20 Mar 2001

5340-01-483-2103
Turnbuckle Body

014832103
2753115-101: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-01-483-2005
Threaded Rod End

20 Mar 2001

5340-01-483-1751
Manual Control Handle

014831751
67-03397-004: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-01-483-1742
Loop Clamp

014831742
95-00101-001: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-01-483-1695
Loop Clamp

014831695
BACC10DW23D: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-01-483-1694
Loop Clamp

014831694
BACC10DR7: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-01-483-1693
Loop Clamp

014831693
BACC10DR6: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-01-483-0956
Loop Clamp

014830956
BACC10BY8B: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-01-483-0839
Hand Carrying Strap Assembly

15 Mar 2001

5340-01-483-0861
Access Cover

15 Mar 2001

5340-01-482-9694
Loop Clamp

014829694
BACC10EP5: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-01-482-9325
Dust And Moisture Seal Protective Cover

014829325
7822000623: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-01-482-8772
Male Assembly Latch

7 Mar 2001

5340-01-482-8756
Cb Rotating Assy

014828756
4D09667-004: RNCC: 3 | RNVC: 1
6511E90FN21: RNCC: 5 | RNVC: 1

7 Mar 2001

5340-01-482-8370
Window Retaining Plate

014828370
77425-1: RNCC: 3 | RNVC: 2
77425: RNCC: 5 | RNVC: 2
77425: RNCC: 5 | RNVC: 9
77425-1: RNCC: 5 | RNVC: 9

6 Mar 2001

5340-01-482-8345
Roller Holder

6 Mar 2001

5340-01-482-8128
Dust And Moisture Seal Protective Cap

014828128
SC15B: RNCC: 3 | RNVC: 9

5 Mar 2001

5340-01-482-8034
Angle Bracket

014828034
K684437-13: RNCC: 3 | RNVC: 2

5 Mar 2001

5340-01-482-8037
Mounting Bracket

014828037
KC84418-001: RNCC: 3 | RNVC: 2

5 Mar 2001

5340-01-482-7889
Headless Straight Rod

014827889
AS20253P2-5449: RNCC: 3 | RNVC: 2
MS20253P2-5449: RNCC: 5 | RNVC: 9

2 Mar 2001

5340-01-482-7793
Ring Extractor

014827793
428: RNCC: 3 | RNVC: 9

2 Mar 2001

5340-01-482-7535
Headless Straight Rod

014827535
AS20253P2-3066: RNCC: 3 | RNVC: 2
MS20253P2-3066: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-01-482-7536
Headless Straight Rod

014827536
AS20253P2-8080: RNCC: 3 | RNVC: 2
MS20253P2-8080: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-01-482-7059
Mounting Plate Assy

014827059
901-172-301-103: RNCC: 3 | RNVC: 2

1 Mar 2001

5340-01-482-6106
Cushioning Pad

014826106
3331AS3000-18: RNCC: 3 | RNVC: 2
3331AS3000-18: RNCC: 5 | RNVC: 2

28 Feb 2001

5340-01-482-6333
Mounting Bracket

014826333
17P1E1022-535: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-01-482-6331
Mounting Bracket

014826331
17P1E1022-537: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-01-482-6239
Mounting Bracket

014826239
1887310: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-01-482-6233
Mounting Bracket

014826233
133321-00: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-01-482-6061
Latch Bar

28 Feb 2001

5340-01-482-5952
Nonmetallic Bumper

014825952
K636708-31: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-01-482-4887
Mounting Bracket

014824887
904-14242: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4885
Mounting Bracket

014824885
565-14349: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4888
Mounting Bracket

014824888
904-14250: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4883
Mounting Bracket

014824883
904-14505: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4884
Mounting Bracket

014824884
904-14254-1: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4879
Mounting Bracket

014824879
904-14280: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4880
Mounting Bracket

014824880
904-14545: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4882
Mounting Bracket

014824882
904-14249-1: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4878
Mounting Bracket

014824878
904-14256: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-4877
Mounting Bracket

014824877
904-14283: RNCC: 3 | RNVC: 2

23 Feb 2001

5340-01-482-3694
Suction Cup

20 Feb 2001

5340-01-482-2461
Mechanical Stop

14 Feb 2001

5340-01-482-1283
Access Cover

9 Feb 2001

5340-01-482-1297
Access Cover

9 Feb 2001

5340-01-482-1275
Access Cover

9 Feb 2001

5340-01-482-1107
Loop Clamp

014821107
3225T27: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-01-482-0091
Packing Retainer

5 Feb 2001

5340-01-481-9750
Angle Bracket

014819750
17P3A1368-510: RNCC: 3 | RNVC: 2

1 Feb 2001

5340-01-481-9041
Turnbuckle

014819041
12987863-1: RNCC: 3 | RNVC: 2

30 Jan 2001

5340-01-481-8532
Rim Latch

014818532
323805-57: RNCC: 3 | RNVC: 2
73820-1: RNCC: 5 | RNVC: 9

29 Jan 2001

5340-01-481-8298
Snap-In Plain Standoff

014818298
3244709-1: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-01-481-8148
Coupling V Band

014818148
23523809: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-01-481-8513
Helical Compression Spring Retainer

014818513
B-1592-1: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-01-481-8253
Dust And Moisture Seal Boot

014818253
AE98951R: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-01-481-7912
Shelf Bracket

25 Jan 2001

5340-01-481-7264
Airc Sleeve Bearing

014817264
999716-01: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-01-481-6779
Antipilferage Seal

014816779
9253124: RNCC: 3 | RNVC: 1
A01-1-1-24: RNCC: 5 | RNVC: 1

19 Jan 2001

5340-01-481-6022
Access Cover

17 Jan 2001

5340-01-481-6506
Door Lock 3 Point

014816506
700413: RNCC: 3 | RNVC: 2
104053: RNCC: 5 | RNVC: 9

18 Jan 2001

5340-01-481-6220
Access Cover

18 Jan 2001

5340-01-481-5942
Loop Clamp

014815942
11944D20Y: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-01-481-5686
Spring Tension Clip

014815686
K831243-015: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-01-481-5690
Webbing Strap

014815690
K686027-013: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-01-481-5688
Spring Tension Clip

014815688
K831243-011: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-01-481-5683
Mounting Bracket

014815683
KC84099-007: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-01-481-5067
Loop Clamp

014815067
11944D32Y: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-01-481-4918
Dust And Moisture Seal Boot

10 Jan 2001

5340-01-481-4411
Dust And Moisture Seal Protective Cap

8 Jan 2001

5340-01-481-4318
Buttoninsertion

8 Jan 2001

5340-01-481-4120
Mounting Bracket

5 Jan 2001

5340-01-481-2816
Clamp Bolt Assembly

014812816
L3011684-001: RNCC: 3 | RNVC: 2

27 Dec 2000

5340-01-481-2508
Access Cover

014812508
9326100357: RNCC: 3 | RNVC: 2

27 Dec 2000

5340-01-481-2314
Mounting Plate

014812314
KC84182-011: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-01-481-2313
Mounting Bracket

014812313
KC84182-013: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-01-481-2235
Mounting Plate

014812235
5238316: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-01-481-2222
Latch Bar

22 Dec 2000

5340-01-481-1967
Nonmetallic Bumper

014811967
863-000465: RNCC: 3 | RNVC: 2
52534 D2: RNCC: 5 | RNVC: 2

21 Dec 2000

5340-01-481-1767
Mounting Bracket

014811767
24709310: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-01-481-1556
Extension Drawer Slide

014811556
36002271: RNCC: 3 | RNVC: 2
C452782-01: RNCC: 5 | RNVC: 2

19 Dec 2000

5340-01-481-1025
Mounting Bracket

014811025
2472366: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-01-481-0443
Retaining Clip

014810443
2478886: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-01-481-0444
Dust And Moisture Seal Protective Plug

014810444
2478885: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-01-481-0445
Dust And Moisture Seal Protective Cap

014810445
2478893: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-01-480-9679
Mounting Bracket

014809679
24781015: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-01-480-9690
Stand Base

014809690
2477081: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-01-480-9477
Block Hinge Access

014809477
246383-94: RNCC: 3 | RNVC: 2
246383-94: RNCC: 3 | RNVC: 9

12 Dec 2000

5340-01-480-9370
Butt Hinge

014809370
248584-96: RNCC: 3 | RNVC: 2
248584-96: RNCC: 3 | RNVC: 9

12 Dec 2000

5340-01-480-9352
Butt Hinge

014809352
246494-96: RNCC: 3 | RNVC: 2
246494-96: RNCC: 5 | RNVC: 9

12 Dec 2000

5340-01-480-9353
Bracket Panel Modem

014809353
246494-95: RNCC: 3 | RNVC: 2
246494-95: RNCC: 3 | RNVC: 9

12 Dec 2000

5340-01-480-8817
Mounting Plate

014808817
2470174: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-9139
Snap-In Threaded Standoff

014809139
248516: RNCC: 3 | RNVC: 2
248516: RNCC: 3 | RNVC: 9

11 Dec 2000

5340-01-480-9152
Clamp Bolt Assembly

11 Dec 2000

5340-01-480-9067
Webbing Strap

014809067
296448: RNCC: 3 | RNVC: 2
296448: RNCC: 5 | RNVC: 9

9 Dec 2000

5340-01-480-8819
Mounting Plate

014808819
2470175: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-8243
Airc A Sump Bracket

014808243
5119T16G01: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-01-480-8820
Mounting Plate

014808820
2470176: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-8825
Detent Plunger

014808825
2470064: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-8826
Detent Plunger

014808826
2470063: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-8824
Detent Plunger

014808824
2470065: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-01-480-8044
Mounting Plate

014808044
6022101: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-01-480-8736
Dust And Moisture Seal Protective Plug

014808736
141881G1: RNCC: 3 | RNVC: 1
141881GP1: RNCC: 5 | RNVC: 1
141505PC211: RNCC: D | RNVC: 9

8 Dec 2000

5340-01-480-8463
Seal Cover Assembly

014808463
2746457-2: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-01-480-8357
Du Protective Cover

014808357
2746457-1: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-01-480-7866
Sleeve Bearing

6 Dec 2000

5340-01-480-7072
Mounting Plate

014807072
29535213: RNCC: 3 | RNVC: 2

2 Dec 2000

5340-01-480-7062
Loop Clamp

2 Dec 2000

5340-01-480-6558
Mounting Bracket

014806558
2570-224835: RNCC: 3 | RNVC: 2
6515NCM000275: RNCC: 5 | RNVC: 1
00-0515: RNCC: 5 | RNVC: 1

30 Nov 2000

5340-01-480-6278
Mounting Bracket

014806278
CU50206: RNCC: 3 | RNVC: 2
CU50206: RNCC: 3 | RNVC: 9

29 Nov 2000

5340-01-480-6273
Access Cover

014806273
CU50011: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-01-480-6172
Mounting Bracket

014806172
00704-0691-0001: RNCC: 3 | RNVC: 2
00704-0691: RNCC: D | RNVC: 9

29 Nov 2000

5340-01-480-5872
Mechanical Stop

014805872
K653020-15: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-01-480-5866
Clamp Cable

28 Nov 2000

5340-01-480-5584
Lock-Release Lever

014805584
409.05270: RNCC: 3 | RNVC: 2
409.052-720: RNCC: 5 | RNVC: 9

27 Nov 2000

5340-01-480-3759
Mounting Bracket

014803759
52F6516: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-01-480-3811
Metallic Solid Wheel

014803811
802025107505-10: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-01-480-3252
Mounting Plate

014803252
4178636: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-01-480-2823
Cylinderlock

14 Nov 2000

5340-01-480-2773
Airc Helical Spring

014802773
2684020: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-01-480-2564
Mortise Lock Set

014802564
2962: RNCC: 3 | RNVC: 2
AR2962: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-01-480-2401
Mounting Bracket

014802401
12343628: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-01-480-2338
Secondary Lock

11 Nov 2000

5340-01-480-1487
Block Clamp

014801487
11934A07: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-01-480-1364
Loop Clamp

8 Nov 2000

5340-01-480-1120
Block Clamp

014801120
11938-02: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-01-480-0833
Spacing Threaded Standoff

014800833
4632-10-32-SS(MOD): RNCC: 3 | RNVC: 1
256-7285223PN104: RNCC: 5 | RNVC: 1

7 Nov 2000

5340-01-480-0709
Mounting Bracket

014800709
PE-00-173: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-01-480-0580
Section Block Clamp

014800580
11935A08: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0615
Loop Clamp

014800615
11944D30Y: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0578
Section Block Clamp

014800578
11935A01: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0577
Block Clamp

014800577
11934B01: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0581
Section Block Clamp

014800581
11935A09: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0574
Section Block Clamp

014800574
11934A01: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0579
Section Block Clamp

014800579
11935A04: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-01-480-0348
Loop Clamp

014800348
BACC10LE500S: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-01-480-0175
Nonmetallic Bumper

014800175
V08751000-904: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-01-479-9659
Galvanized Platform

014799659
9HB97: RNCC: 3 | RNVC: 2
9HB97: RNCC: 3 | RNVC: 9
T42060B-1GA: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-01-479-9432
Threaded Rod End

014799432
525-12494-2: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-01-479-9203
Locking Handle

1 Nov 2000

5340-01-479-9080
Spring Holder

014799080
624927: RNCC: 3 | RNVC: 2

1 Nov 2000

5340-01-479-8957
Multiple Angle Bracket

014798957
24289-1: RNCC: 3 | RNVC: 2

1 Nov 2000

5340-01-479-8625
Lh Hinge

014798625
07559-00-004: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-01-479-8405
Dust And Moisture Seal Protective Cap

31 Oct 2000

5340-01-479-8361
Aircra Ball Bearing

014798361
PS8KDDFS265A: RNCC: 3 | RNVC: 2
77R12LR1JT: RNCC: 3 | RNVC: 2
R12PPDK497274ABEC1: RNCC: 3 | RNVC: 2
137-088-0013: RNCC: 7 | RNVC: 2

31 Oct 2000

5340-01-479-8272
Handle Grip

31 Oct 2000

5340-01-479-7935
Rod End Clevis

014797935
K872311-001: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-01-479-7929
Helical Compression Spring Seat

014797929
624898: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-01-479-5836
Guard Army Gear

26 Oct 2000

5340-01-479-4948
Mounting Plate

014794948
039-47445: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-01-479-4830
Mechanical Stop

23 Oct 2000

5340-01-479-4358
Rod End Clevis

014794358
131426: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-01-479-4353
Mounting Bracket

20 Oct 2000

5340-01-479-4259
Rod End Clevis

014794259
136828: RNCC: 3 | RNVC: 2
115500: RNCC: 5 | RNVC: 9

20 Oct 2000

5340-01-479-3009
Nozzle Adapter

17 Oct 2000

5340-01-479-2974
Handle

17 Oct 2000

5340-01-479-2925
Stowage Cover Latch

17 Oct 2000

5340-01-479-2744
Exhaust Bracket

014792744
3129195: RNCC: 3 | RNVC: 2
3129195: RNCC: 3 | RNVC: 9

17 Oct 2000

5340-01-479-2239
Electronic Components Housing

014792239
9333103541: RNCC: 3 | RNVC: 2

16 Oct 2000

5340-01-479-2078
Mounting Plate

014792078
9333103542: RNCC: 3 | RNVC: 2

16 Oct 2000

5340-01-479-1944
Mounting Bracket

13 Oct 2000

5340-01-479-1430
Mounting Bracket

014791430
1321E1271: RNCC: 3 | RNVC: 2
1321E1271: RNCC: D | RNVC: 9

12 Oct 2000

5340-01-479-1302
Mounting Plate

014791302
3114AS721: RNCC: 1 | RNVC: 2
3114AS721: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-01-479-1292
Mounting Bracket

014791292
A55L10413-5: RNCC: 3 | RNVC: 2
A55L10413-5: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-01-479-0640
Strap Fastener Loop

014790640
RIA149318: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-01-479-0658
Mounting Bracket

10 Oct 2000

5340-01-478-9647
Ai Aircraft Fairing

014789647
74A120986-1006: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-01-479-0380
Mechanical Stop

014790380
41503-5: RNCC: 3 | RNVC: 2

6 Oct 2000

5340-01-478-9505
Ai Aircraft Fairing

014789505
74A172316-2018: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-01-478-9466
Ai Bearing Retainer

014789466
2746685-1: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-01-478-9300
Ai Aircraft Fairing

014789300
74A172316-2016: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-01-478-8848
Mounting Plate

014788848
709-4-012: RNCC: 3 | RNVC: 2

29 Sep 2000

5340-01-478-7701
Ai Aircraft Fairing

014787701
74A140104-1014: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-01-478-7608
Loop Clamp

26 Sep 2000

5340-01-478-6928
Loop Clamp

014786928
PC501B: RNCC: 3 | RNVC: 2

22 Sep 2000

5340-01-478-6565
Access Door Locking Ring

21 Sep 2000

5340-01-478-6564
Mechanical Transmission Parts Kit

21 Sep 2000

5340-01-478-6459
Air B F Spring Assy

014786459
50823: RNCC: 3 | RNVC: 2

21 Sep 2000

5340-01-478-6193
Access Cover

014786193
K686739-015: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-01-478-4816
Positioning Thrust Stop

14 Sep 2000

5340-01-478-4945
Light Retention Bracket

14 Sep 2000

5340-01-478-4931
Manual Control Handle

14 Sep 2000

5340-01-478-4167
Bow Handle

12 Sep 2000

5340-01-478-4149
Bow Handle

13 Sep 2007

5340-01-478-3874
Spacing Threaded Standoff

014783874
1401M47G01: RNCC: 3 | RNVC: 2

11 Sep 2000

5340-01-478-3687
Access Cover

014783687
27-82170-002: RNCC: 3 | RNVC: 2

8 Sep 2000

5340-01-478-3688
Bolt Kit

014783688
35036-1: RNCC: 3 | RNVC: 2

8 Sep 2000

5340-01-478-3670
Vehicular Door Latch

8 Sep 2000

5340-01-478-3373
Ai Aircraft Fairing

014783373
74A172316-2017: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-01-478-3428
Mounting Bracket

014783428
948789-814: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-01-478-3425
Mounting Bracket

014783425
948789-811: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-01-478-3372
Ai Aircraft Fairing

014783372
74A172316-2019: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-01-478-3370
Ai Aircraft Fairing

014783370
74A172316-2015: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-01-478-3232
Ai Aircraft Fairing

014783232
74A140104-1009: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-01-478-3238
Ai Aircraft Fairing

014783238
74A140104-1013: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-01-478-2906
Butt Hinge

014782906
A51A9287-31: RNCC: 3 | RNVC: 9
4514-035-01: RNCC: 5 | RNVC: 9

5 Sep 2000

5340-01-478-2905
Rim Latch

014782905
A51A9287-29: RNCC: 3 | RNVC: 9
4514-035: RNCC: 5 | RNVC: 9

5 Sep 2000

5340-01-478-2880
Mounting Bracket

014782880
948793-801: RNCC: 3 | RNVC: 2

5 Sep 2000

5340-01-478-2755
Access Cover

014782755
1401M12P07: RNCC: 3 | RNVC: 2

5 Sep 2000

5340-01-478-0889
Extension Drawer Slide

014780889
13220047-1: RNCC: 3 | RNVC: 2

30 Aug 2000

5340-01-478-0497
General Purpose Resilient Mount

014780497
402-0706: RNCC: 3 | RNVC: 2

29 Aug 2000

5340-01-478-0392
Permanent Magnet

29 Aug 2000

5340-01-478-0184
Mounting Bracket

014780184
948792-801: RNCC: 3 | RNVC: 2

28 Aug 2000

5340-01-478-0185
Mounting Bracket

014780185
948793-3: RNCC: 3 | RNVC: 2

28 Aug 2000

5340-01-477-9609
Mounting Bracket

25 Aug 2000

5340-01-477-9230
Loop Clamp

23 Aug 2000

5340-01-477-9248
Manual Control Handle

014779248
17P2G3517-501: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-01-477-8104
Angle Bracket

014778104
2107296-1: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-01-477-8045
Spring Tension Clip

014778045
FCC-A-8: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-01-477-8027
Aircraft Retainer

014778027
730102: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-01-477-8014
Loop Clamp

18 Aug 2000

5340-01-477-7989
Blast Deflector Plate

18 Aug 2000

5340-01-477-6916
Loop Clamp

014776916
TA028M015NB44: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-01-477-6452
Loop Clamp

14 Aug 2000

5340-01-477-6438
Loop Clamp

014776438
TA028M015HC28: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-01-477-5421
Manual Control Lever

014775421
9515100405: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-01-477-5487
Stand Base

014775487
12948081: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-01-477-5297
Office Machine Lock

014775297
KMW62694: RNCC: 3 | RNVC: 2
KMW62694: RNCC: 3 | RNVC: 2
62694: RNCC: 3 | RNVC: 2
62694: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-01-477-5299
Office Machine Lock

014775299
64164: RNCC: 3 | RNVC: 2
64164: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-01-477-5300
Office Machine Lock

014775300
64163: RNCC: 3 | RNVC: 2
64163: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-01-477-5298
Office Machine Lock

014775298
62692: RNCC: 3 | RNVC: 2
62692: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-01-477-5295
Office Machine Lock

014775295
64131: RNCC: 3 | RNVC: 2
64131: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-01-477-3679
Mounting Bracket

7 Aug 2000

5340-01-477-3677
Mounting Bracket

7 Aug 2000

5340-01-477-3651
Hand Carrying Strap Assembly

7 Aug 2000

5340-01-477-3551

7 Aug 2000

5340-01-477-2483
Access Cover

014772483
9326100165: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-01-477-2458
Access Cover

014772458
9326100167: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-01-477-1766
Mounting Bracket

014771766
5-15-18472: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-01-476-9952
Manual Control Handle

014769952
64913: RNCC: 3 | RNVC: 2
64913REVA: RNCC: 5 | RNVC: 9

27 Jul 2000

5340-01-476-9951
Manual Control Handle

014769951
64912: RNCC: 3 | RNVC: 2
64912REVA: RNCC: 5 | RNVC: 9

27 Jul 2000

Load More Results