What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 34 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 34 of 1045

5340-01-518-1742
Air Retaining Strap

015181742
74A343529-1003: RNCC: 3 | RNVC: 2
74A343529-1003: RNCC: C | RNVC: 1

4 Mar 2004

5340-01-518-1477
Mounting Plate

015181477
E8340M36: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-01-518-1480
Access Cover

015181480
E8433: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-01-518-1192
Mounting Bracket

015181192
82-2785443-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1187
Mounting Plate

015181187
82-2784325-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1135
Magnet Strike Plate

015181135
2300621-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1193
Mounting Bracket

015181193
82-2785449-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1095
General Purpose Access Door

015181095
82-2784336-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1084
Access Cover

015181084
82-2785535-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-1083
Access Cover

015181083
82-2784351-1: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-01-518-0773
Loop Clamp

015180773
BACC10AA22-16: RNCC: 3 | RNVC: 2
BACC10AA22-16: RNCC: 5 | RNVC: 2

1 Mar 2004

5340-01-518-0854
Nut And Bolt Retainer

015180854
5PTV7002B4K53V: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-01-518-0693
Access Cover

015180693
8900597-503: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-01-518-0690
Access Cover

015180690
8900577-303: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-01-518-0213
Dust And Moisture Seal Protective Plug

015180213
820-6896275PC1B0187: RNCC: 3 | RNVC: 1
1B0187: RNCC: 5 | RNVC: 1
9330-LL-N03-H968: RNCC: 5 | RNVC: 1

27 Feb 2004

5340-01-518-0068
Load Cell Assembly

015180068
25183-1: RNCC: 3 | RNVC: 2

27 Feb 2004

5340-01-517-9479
Angle Bracket

015179479
5598699-9: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-01-517-9259
Mounting Bracket

015179259
4322728-56: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-01-517-9255
Seal Retaining Plate

015179255
4322291-01: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-01-517-9254
Mounting Bracket

015179254
4322324-04: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-01-517-9252
Mounting Bracket

015179252
4322728-45: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-01-517-9068
Flush Catch

015179068
750-5-401-19: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-01-517-8958
Synchro Clamp

24 Feb 2004

5340-01-517-8875
Cushioning Pad

015178875
K604011-349: RNCC: 3 | RNVC: 2

23 Feb 2004

5340-01-517-8387
Cushioning Pad

015178387
2302801-1: RNCC: 3 | RNVC: 2

20 Feb 2004

5340-01-517-7285
Access Cover

015177285
2300619-3: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-01-517-7283
Access Cover

015177283
2300619-1: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-01-517-7284
Access Cover

015177284
2300619-5: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-01-517-7215
Access Cover

015177215
50-9339-39: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-01-517-6847
Mounting Bracket

015176847
01201702-1: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6267
Butt Hinge Leaf

015176267
K631730-19: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6265
Swivel Caster

015176265
30305T26: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6462
Manual Control Handle

015176462
185528-1: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6377
Access Cover

015176377
84410-17: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6168
Mounting Bracket

015176168
15040152: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-01-517-6266
Butt Hinge Leaf

015176266
K631730-21: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-01-517-6169
Mounting Bracket

015176169
15040154A: RNCC: 3 | RNVC: 2
15040154: RNCC: 5 | RNVC: 9

14 Feb 2004

5340-01-517-6172
Mounting Plate

015176172
15045087: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-01-517-5738
Mechanical Stop

12 Feb 2004

5340-01-517-5241
Dust And Moisture Seal Boot

015175241
5PTE0171-1: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-01-517-5239
Dust And Moisture Seal Boot

015175239
5PTE0161-1: RNCC: 3 | RNVC: 2
5PTE0161-1: RNCC: 5 | RNVC: 9

10 Feb 2004

5340-01-517-4787
Block Clamp

015174787
12997471: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-01-517-4465
Swivel Caster

015174465
2408T791: RNCC: 3 | RNVC: 2

9 Feb 2004

5340-01-517-4464
Swivel Caster

015174464
30305T16: RNCC: 3 | RNVC: 2

9 Feb 2004

5340-01-517-4420
Butt Hinge Leaf

015174420
K631729-23: RNCC: 3 | RNVC: 2

9 Feb 2004

5340-01-517-4419
Butt Hinge Leaf

015174419
K631729-25: RNCC: 3 | RNVC: 2

9 Feb 2004

5340-01-517-3807
Anchor Fitting

015173807
50006: RNCC: 3 | RNVC: 2

6 Feb 2004

5340-01-517-3721
Clevis And U-Bolt

015173721
134250-00: RNCC: 3 | RNVC: 2
80-6004: RNCC: C | RNVC: 1

6 Feb 2004

5340-01-517-3333
Access Door Hinge

015173333
RIA148977-1 (TAN): RNCC: 3 | RNVC: 2

5 Feb 2004

5340-01-517-3064
Manual Control Handle

015173064
K804020-013: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-01-517-2988
Manual Control Handle

015172988
K804017-015: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-01-517-3003
Manual Control Lever

015173003
65C18080-7: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-01-517-2990
Headless Straight Rod

015172990
K631729-27: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-01-517-2437
General Purpose Resilient Mount

015172437
BACS14C106-3A: RNCC: 3 | RNVC: 1
106PLE1023-3: RNCC: 3 | RNVC: 2

3 Feb 2004

5340-01-517-2124
Dust And Moisture Seal Boot

015172124
5PTE0165-1: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-01-517-1606
Loop Clamp

015171606
65-42335-3: RNCC: 3 | RNVC: 2

30 Jan 2004

5340-01-517-1608
Loop Clamp

015171608
66-14186-2: RNCC: 3 | RNVC: 2

30 Jan 2004

5340-01-517-0537
Loop Clamp

015170537
909-0530-2-06ASH: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-01-517-0285
Manual Control Handle

015170285
820-7348602PCH400X300X088: RNCC: 3 | RNVC: 1
H400X300X088: RNCC: 5 | RNVC: 1

28 Jan 2004

5340-01-516-8722
Mounting Bracket

015168722
816667F3: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-01-516-6764
Loop Clamp

015166764
AS21919WDG04: RNCC: 3 | RNVC: 2
10189289: RNCC: 6 | RNVC: 9

14 Jan 2004

5340-01-516-7104
Manual Control Handle

15 Jan 2004

5340-01-516-6718
General Purpose Resilient Mount

015166718
HT023-7: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-01-516-6767
Loop Clamp

015166767
AS21919WDG05: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-01-516-6766
Loop Clamp

14 Jan 2004

5340-01-516-5936
Extension Drawer Slide

015165936
5HC13357-101: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-01-516-5744
Pipe Hanger

015165744
517-7503151ITEM16: RNCC: 3 | RNVC: 1

12 Jan 2004

5340-01-516-5799
Loop Clamp

015165799
517-7503149ITEM33: RNCC: 3 | RNVC: 1

12 Jan 2004

5340-01-516-4594
Arched Cushion

015164594
65-8658-20: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-01-516-4580
Fire Detect Adapter

015164580
66-29065-1: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-01-516-3385
Aircraft Hook Knob

015163385
560050072: RNCC: 3 | RNVC: 2

5 Jan 2004

5340-01-516-3130
Mounting Bracket

015163130
5125T85P19: RNCC: 3 | RNVC: 2

31 Dec 2003

5340-01-516-3126
Mounting Bracket

31 Dec 2003

5340-01-516-2826
Filler Opening Cap

015162826
2S39012-25-0011: RNCC: 2 | RNVC: 2

29 Dec 2003

5340-01-516-2726
Mechanical Stop

015162726
22-13035: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-01-516-2708
Mounting Bracket

015162708
19077A07: RNCC: 3 | RNVC: 2
19077A5: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-01-516-2089
Mounting Bracket

015162089
6394188-2: RNCC: 3 | RNVC: 2
6393680 FIND NO 008: RNCC: 7 | RNVC: 2

23 Dec 2003

5340-01-516-2139
Manual Control Lever

015162139
1395-811352 2: RNCC: 3 | RNVC: 2

23 Dec 2003

5340-01-516-2061
Mounting Bracket

23 Dec 2003

5340-01-516-1901
Mounting Plate

015161901
2002-14-004-A02: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-01-516-1741
Escutcheon Plate

015161741
41585001Q0250HC: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-01-515-9918
Non-Split Body Assy

015159918
H73457-02-4: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-01-515-9917
Carrier Assembly

015159917
H73457-02-5: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-01-515-9862
Clamping Catch

015159862
97-99-199-20: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-01-515-9718
Mounting Bracket

015159718
F1R12-A30-302-001: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-01-515-9524
Access Cover

015159524
160-010020-G002: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-01-515-9213
Door Hook

015159213
210784: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-01-515-8787
Split Seat Assy

015158787
H73457-02-1: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8707
Bow Handle

015158707
420-61265-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8705
Mounting Bracket

015158705
420-61316-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8706
Bow Handle

015158706
420-61365-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8702
Mounting Bracket

015158702
420-61342-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8698
Mounting Bracket

015158698
420-61315-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8696
Mounting Bracket

015158696
420-61220-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8691
Mounting Bracket

015158691
420-61345-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8695
Mounting Bracket

015158695
420-61221-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8694
Mounting Bracket

015158694
420-61343-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8692
Mounting Bracket

015158692
420-61344-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8690
Mounting Bracket

015158690
420-61346-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8665
Access Cover

015158665
420-61530-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8662
Access Cover

015158662
420-61532-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8667
Mounting Bracket

015158667
420-61524-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-8657
Access Cover

015158657
420-61730-01: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-01-515-7673
Snap Hook

015157673
Z-701: RNCC: 3 | RNVC: 2
2997: RNCC: 5 | RNVC: 2
SC5149-1: RNCC: 7 | RNVC: 2

8 Dec 2003

5340-01-515-7137
Mounting Bracket

015157137
13001722: RNCC: 3 | RNVC: 2

5 Dec 2003

5340-01-515-7027
Helical Compression Spring Seat

4 Dec 2003

5340-01-515-6584
Special Front Panel

015156584
R549031-01: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-01-515-6587
Special Front Panel

015156587
R549027-01: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-01-515-6316
Loop Clamp

015156316
5HD71300-109: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6352
Nonmetallic Channel

3 Dec 2003

5340-01-515-6414
Mounting Bracket

3 Dec 2003

5340-01-515-6204
Mounting Bracket

015156204
R379135-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6202
Access Cover

015156202
R476033-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6193
Mounting Bracket

015156193
R476381-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6198
Access Cover

015156198
R378218-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6197
Mounting Bracket

015156197
R476380-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6189
Access Cover

015156189
R476446-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6183
Access Cover

015156183
R472815-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-6182
Front Panel Baffle

015156182
R476041-01: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-01-515-5751
Extension Drawer Slide

015155751
CS100-024: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-01-515-4395
Rear Tef Simuator Panel

015154395
420-61812-01: RNCC: 3 | RNVC: 2

25 Nov 2003

5340-01-515-4160
Multiple Angle Bracket

015154160
8I1439: RNCC: 3 | RNVC: 2

25 Nov 2003

5340-01-515-3804
Dust And Moisture Seal Protective Plug

015153804
820-6896275PC3F5500SP-43: RNCC: 3 | RNVC: 1
3F5500SP-43: RNCC: 5 | RNVC: 1

24 Nov 2003

5340-01-515-4003
Mounting Bracket

015154003
BRACKET,MOUNTING: RNCC: 3 | RNVC: 2

24 Nov 2003

5340-01-515-3803
Dust And Moisture Seal Protective Plug

015153803
820-6896275PC3F5200SP-43: RNCC: 3 | RNVC: 1
3F5200SP-43: RNCC: 5 | RNVC: 1

24 Nov 2003

5340-01-515-3754
Access Cover

015153754
185-6784: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-01-515-3752
Access Cover

015153752
185-6772: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-01-515-3602
Dust And Moisture Seal Protective Plug

015153602
820-6896275PC1FS3400-F3200-43: RNCC: 3 | RNVC: 1
1FS3400-F3200-43: RNCC: 5 | RNVC: 1

21 Nov 2003

5340-01-515-3613
Dust And Moisture Seal Protective Plug

015153613
820-6896275PC3F2200-3SS2100: RNCC: 3 | RNVC: 1
3F2200-3SS2100: RNCC: 5 | RNVC: 1

21 Nov 2003

5340-01-515-3553
Mounting Bracket

015153553
W82EE1105: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-01-515-3504
Nut And Bolt Retainer

015153504
FTR-04-0-3-15-T: RNCC: 3 | RNVC: 2
5PTV7002B4M15V: RNCC: 7 | RNVC: 2

20 Nov 2003

5340-01-515-3169
Helical Compression Spring Seat

015153169
185-6778: RNCC: 3 | RNVC: 2

20 Nov 2003

5340-01-515-3161
Synchro Clamp

015153161
185-6733: RNCC: 3 | RNVC: 2

20 Nov 2003

5340-01-515-3112
Mounting Bracket

015153112
82A5050A0651: RNCC: 3 | RNVC: 2

20 Nov 2003

5340-01-515-3024
Access Cover

015153024
185-6213: RNCC: 3 | RNVC: 2

20 Nov 2003

5340-01-515-2395
Air Conditioning Filter Element

19 Nov 2003

5340-01-515-2333
Mounting Plate

015152333
30451: RNCC: 3 | RNVC: 2
76-30451-01: RNCC: 5 | RNVC: 2

19 Nov 2003

5340-01-515-2262
Rh Uplock Bracket

015152262
200-0458-102: RNCC: 3 | RNVC: 2
200-0458-102: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-01-515-2263
Lh Uplock Bracket

015152263
200-0458-101: RNCC: 3 | RNVC: 2
200-0458-101: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-01-515-2047
Mounting Bracket

015152047
12420885-007: RNCC: 3 | RNVC: 2
12420885-007: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-01-515-1865
Dust And Moisture Seal Protective Plug

015151865
820-6896275PC1B2000: RNCC: 3 | RNVC: 1
1B2000: RNCC: 5 | RNVC: 1
5340-LL-N01-H776: RNCC: 5 | RNVC: 1

18 Nov 2003

5340-01-515-1805
Dust And Moisture Seal Protective Plug

015151805
820-6896275PC4B0269: RNCC: 3 | RNVC: 1
4B0269: RNCC: 5 | RNVC: 1
5340-LL-N01-H579: RNCC: 5 | RNVC: 1

18 Nov 2003

5340-01-515-1810
Dust And Moisture Seal Protective Plug

015151810
820-6896275PC1B0438: RNCC: 3 | RNVC: 1
1B0438: RNCC: 5 | RNVC: 1
5340-LL-N01-H984: RNCC: 5 | RNVC: 1

18 Nov 2003

5340-01-515-1807
Dust And Moisture Seal Protective Plug

015151807
820-6896275PC4B0493: RNCC: 3 | RNVC: 1
4B0493: RNCC: 5 | RNVC: 1
5340-LL-N01-H783: RNCC: 5 | RNVC: 1

18 Nov 2003

5340-01-515-0796
Manual Control Lever

015150796
F1R12-A90-148-001: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-01-515-1235
Air Conditioning Filter Element

17 Nov 2003

5340-01-515-0534
Mounting Kit

015150534
KIT-A51SW: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-01-515-0849
Angle Bracket

015150849
3408812: RNCC: 3 | RNVC: 2
3408812: RNCC: 3 | RNVC: 9

14 Nov 2003

5340-01-515-0674
Dust And Moisture Seal Protective Cover

015150674
02-2781579-3: RNCC: 3 | RNVC: 2
02-2781579-3: RNCC: 5 | RNVC: 9
02-2781579-3: RNCC: 5 | RNVC: 9

14 Nov 2003

5340-01-515-0490
Mounting Bracket

015150490
2450-MAT: RNCC: 3 | RNVC: 2
2200131-201: RNCC: 7 | RNVC: 2

14 Nov 2003

5340-01-515-0508
Engine Coolant Radiator

015150508
68934: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-01-515-0269
Mounting Bracket

015150269
F1R12-A86-306-001: RNCC: 3 | RNVC: 2

13 Nov 2003

5340-01-515-0275
Mounting Plate

015150275
F1R12-A34-150-001: RNCC: 3 | RNVC: 2

13 Nov 2003

5340-01-515-0273
Mounting Plate

015150273
F1R12-A34-151-001: RNCC: 3 | RNVC: 2

13 Nov 2003

5340-01-514-9719
Mounting Bracket

12 Nov 2003

5340-01-514-9439
Spacing Threaded Standoff

015149439
A58594: RNCC: 3 | RNVC: 2
58594: RNCC: 5 | RNVC: 2

10 Nov 2003

5340-01-514-8697
Laboratory Needle

015148697
7934: RNCC: 3 | RNVC: 1

7 Nov 2003

5340-01-514-8509
Quick Release Plunger

6 Nov 2003

5340-01-514-7736
Retaining Strap

015147736
10C-0019-0078: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7731
Metal Grille

015147731
B58531: RNCC: 3 | RNVC: 2
58531: RNCC: 5 | RNVC: 2

4 Nov 2003

5340-01-514-7624
Mounting Plate

015147624
405-7358-01: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7639
Rim Latch

015147639
406-0969: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7635
Mounting Plate

015147635
405-7361: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7637
Rim Latch

015147637
406-0959: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7628
Mounting Plate

015147628
405-7359-02: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7623
General Purpose Access Door

015147623
405-7350-02: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7622
General Purpose Access Door

015147622
405-7357-02: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7621
Mounting Bracket

015147621
405-7345-02: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7617
Mounting Plate

015147617
405-7208-03: RNCC: 3 | RNVC: 2

4 Nov 2003

5340-01-514-7311
Spring Tension Clip

015147311
03-1660-01: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-01-514-6854
Dust And Moisture Seal Protective Cap

015146854
G9213H241NF4: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-6755
Helical Compression Spring Seat

015146755
185-6148: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-6769
Mounting Plate

015146769
185-5879: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-6750
Spacing Threaded Standoff

015146750
185-6152: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-6742
Expansion Plug

015146742
185-6121: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-6743
Synchro Clamp

015146743
185-6146: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-01-514-5867
Butt Hinge

015145867
K631784-29: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-01-514-5787
Positioning Thrust Stop

015145787
185-5906: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-01-514-5327
Butt Hinge

015145327
K631784-31: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-01-514-4047
Cap Assy 3-8In Od

015144047
449905ASSY55: RNCC: 3 | RNVC: 1

24 Oct 2003

5340-01-514-3442
Mounting Actuator Plate

015143442
74A400713-2005: RNCC: 3 | RNVC: 2
74A400713-2005: RNCC: 5 | RNVC: 2

23 Oct 2003

5340-01-514-3371
Mounting Bracket

015143371
23056819: RNCC: 3 | RNVC: 2

22 Oct 2003

5340-01-514-3355
Housing Infl Sail

015143355
6395061-1: RNCC: 3 | RNVC: 2
5793273 FIND 2: RNCC: 5 | RNVC: 2

22 Oct 2003

5340-01-514-2496
Positioning Thrust Stop

015142496
105-0739: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-01-514-1166
Access Cover

015141166
130-5012: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1163
Access Cover

015141163
130-4962-01: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1174
Loop Clamp

015141174
130-4628-03: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1169
Mounting Bracket

015141169
130-3571: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1161
Dust And Moisture Seal Protective Cover

015141161
101-0811: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1136
Helical Compression Spring Seat

015141136
185-6017: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-1123
Rod End Connector

015141123
185-6019: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-01-514-0953
Manual Control Handle

16 Oct 2003

5340-01-514-0836
Dust And Moisture Seal Protective Cap

015140836
AS90376-1/24Y: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-01-514-0824
Mounting Bracket

015140824
5HR50241-108: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-01-514-0830
Mounting Bracket

015140830
UPA12044: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-01-514-0804
Dust And Moisture Seal Protective Cap

015140804
AS90376-1/28Y8: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-01-514-0801
Dust And Moisture Seal Protective Cap

015140801
AS90376-1/25Y: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-01-514-0310
Mounting Plate

015140310
405-6971-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0309
General Purpose Access Door

015140309
405-6957-01: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0308
Mounting Plate

015140308
405-6871-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0307
Mounting Plate

015140307
405-6868-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0298
General Purpose Access Door

015140298
405-6519-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0295
Access Cover

015140295
405-6340: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0292
Synchro Clamp

015140292
403-4059-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0291
Synchro Clamp

015140291
403-3972-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0290
Angle Bracket

015140290
403-3916-02: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0289
General Purpose Resilient Mount

015140289
402-0681-01: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0257
Access Cover

015140257
P11278: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0272
Cover Strip

015140272
319-4404: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0208
Synchro Clamp

015140208
185-6994: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0157
Dust And Moisture Seal Protective Cap-Plug

015140157
517-0138-09: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0154
Dust And Moisture Seal Protective Cap-Plug

015140154
517-0136: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0155
Dust And Moisture Seal Protective Cap-Plug

015140155
517-0138-04: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0156
Dust And Moisture Seal Protective Cap-Plug

015140156
517-0138-07: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-01-514-0045
Mounting Bracket

015140045
953-125: RNCC: 3 | RNVC: 9
953-125: RNCC: C | RNVC: 1

14 Oct 2003

5340-01-513-9289
Access Cover

015139289
B3574C: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-01-513-9155
Mounting Bracket

015139155
23067072: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-01-513-9148
Mounting Bracket

015139148
23065619: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-01-513-9064
Hinge Half Assembly

9 Oct 2003

5340-01-513-8912
Mounting Bracket

015138912
UPA79007-2: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-01-513-8926
Loop Clamp

015138926
NAS1715D29T: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-01-513-8781
Mounting Bracket

015138781
23060861: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-01-513-8266
Angle Bracket

7 Oct 2003

5340-01-513-6710
Mounting Bracket

015136710
9S6620: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-01-513-6625
Mounting Bracket

015136625
UPA12020: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-01-513-6630
Mounting Bracket

015136630
UPA12022-1: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-01-513-6606
Retaining Strap

015136606
851-119: RNCC: 3 | RNVC: 9
851-119: RNCC: C | RNVC: 1

2 Oct 2003

5340-01-513-6145
Turnbuckle

015136145
3671234C114-305: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-01-513-6265
Door Closer

015136265
GSSPR-120LB: RNCC: 3 | RNVC: 2
EBB-10100: RNCC: D | RNVC: 9

1 Oct 2003

5340-01-513-6084
Swivel Caster

015136084
S-HS-4D-4SL: RNCC: 3 | RNVC: 2
S-HS-4D-4SL: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-01-513-5084
Reta Clamp Assembly

015135084
17-2-0696-2: RNCC: 3 | RNVC: 2

26 Sep 2003

5340-01-513-4902
Mounting Bracket

015134902
1000070-022: RNCC: 3 | RNVC: 2

26 Sep 2003

5340-01-513-4735
Mounting Bracket

015134735
23067074: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-01-513-4634
Furniture Glide

015134634
050-0364-001: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-01-513-3889
Cushioning Pad

015133889
MIL-D-24709: RNCC: 4 | RNVC: 1
MIL-D-24709,1.870X0.875X0.328: RNCC: 5 | RNVC: 1
113-7324546ITEM6-4: RNCC: 5 | RNVC: 1

24 Sep 2003

5340-01-513-3711
Composite Base Stud

015133711
CB4000G06CR6-750: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-01-513-3651
Cap Plug Protective

015133651
7175515-01: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-01-513-3530
Threaded Standoff

015133530
CB4001G06CRA12-750: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-01-513-3252
Caster Wheel

23 Sep 2003

5340-01-513-2857
General Purpose Resilient Mount

015132857
UPA41000: RNCC: 3 | RNVC: 2

23 Sep 2003

5340-01-513-2346
Dust And Moisture Seal Protective Cover

015132346
1632: RNCC: 3 | RNVC: 2
LL-H37-3150: RNCC: 5 | RNVC: 1

22 Sep 2003

5340-01-513-2098
Access Cover

015132098
KC04043-001: RNCC: 3 | RNVC: 2

19 Sep 2003

5340-01-513-2088
Mechanical Stop

015132088
K633134-11: RNCC: 3 | RNVC: 2

19 Sep 2003

5340-01-513-1780
Mounting Bracket

015131780
UPA12023: RNCC: 3 | RNVC: 2

18 Sep 2003

5340-01-513-1754
Mounting Bracket

015131754
UPA12043: RNCC: 3 | RNVC: 2

18 Sep 2003

5340-01-513-1713
Retaining Strap

015131713
P00355: RNCC: 3 | RNVC: 2
3955T815: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-01-513-1483
Crank Handle

015131483
11008033: RNCC: 3 | RNVC: 2
LL-H50-9975: RNCC: 5 | RNVC: 1

18 Sep 2003

5340-01-513-0964
Mounting Bracket

015130964
305-437-701-0: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-01-513-0645
Bumper

015130645
UPA95097: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-513-0602
Du Protective Cover

015130602
UAB92051-1: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-513-0515
Cushioning Pad

015130515
CE160CUTSLCN50A: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-513-0026
Bridge Clamp

015130026
818644 2: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-512-9966
Dust And Moisture Seal Protective Cap-Plug

015129966
850306 1: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-512-9985
Mounting Bracket

015129985
99629T 2: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-512-9938
Spring Tension Clip

015129938
2024771C1: RNCC: 3 | RNVC: 2

16 Sep 2003

5340-01-512-9457
Shipping Plug

015129457
JHA696A: RNCC: 3 | RNVC: 1

15 Sep 2003

5340-01-512-9064
Dust And Moisture Seal Protective Cap

015129064
2237M1235: RNCC: 3 | RNVC: 2
2237M1235: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-01-512-8273
Dust And Moisture Seal Protective Cap

015128273
26226203-17: RNCC: 3 | RNVC: 2

11 Sep 2003

5340-01-512-8357
Dust And Moisture Seal Protective Cap

015128357
26226203-13: RNCC: 3 | RNVC: 2

11 Sep 2003

5340-01-512-8270
Ai Aircraft Fairing

015128270
74A172316-2034: RNCC: 3 | RNVC: 2

11 Sep 2003

5340-01-512-8161
Loop Clamp

015128161
GC12D22-7: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-01-512-7602
Loop Clamp

015127602
AS21919WG12: RNCC: 3 | RNVC: 2
AS21919: RNCC: D | RNVC: 9

9 Sep 2003

5340-01-512-7689
Mounting Plate

015127689
65600138: RNCC: 1 | RNVC: 2
65600138-1: RNCC: 3 | RNVC: 2

9 Sep 2003

5340-01-512-7696
Angle Bracket

015127696
65600058: RNCC: 1 | RNVC: 2
65600058-1: RNCC: 3 | RNVC: 2

9 Sep 2003

5340-01-512-7132
Angle Bracket

015127132
65600068: RNCC: 3 | RNVC: 2

8 Sep 2003

5340-01-512-6336
Mechanic Equipment Hardware Kit

5 Sep 2003

5340-01-512-5709
Mounting Plate

4 Sep 2003

5340-01-512-5708
Bolt Kit

015125708
5007985: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-01-512-5673
Rotary Joint Insert

015125673
3A81948: RNCC: 3 | RNVC: 2
4D98026 ITEM 15: RNCC: 5 | RNVC: 2

4 Sep 2003

5340-01-512-5028
Snap Hook

015125028
C119019-1: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-01-512-5022
Mounting Plate

3 Sep 2003

5340-01-512-3747
Dust And Moisture Seal Protective Cap

015123747
E8CR106-0370: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-01-512-3448
Mate Aircraft Clamp

015123448
74A503055-1001: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-01-512-3445
Shimmy Damper

015123445
70219-02121-043: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-01-512-3444
Shimmy Damper

015123444
70219-02121-044: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-01-512-3442
Mounting Bracket

015123442
4154T67G01: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-01-512-3209
Spacing Threaded Standoff

015123209
1951E: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-01-512-2431
Spacing Threaded Standoff

015122431
65600139-13: RNCC: 3 | RNVC: 2

26 Aug 2003

5340-01-512-0857
Webbing Strap

015120857
A31170032 ITEM 23: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-01-512-0856
Dust And Moisture Seal Protective Cover

21 Aug 2003

5340-01-512-0180
Access Door Hinge

015120180
KC33080-002: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0178
Access Door Hinge

015120178
KC33079-002: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0175
Access Door Hinge

015120175
KC33080-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0173
General Purpose Resilient Mount

015120173
K881005-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0159
Access Cover

015120159
KC35050-003: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0115
Access Door Hinge

015120115
KC33097-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0103
Access Door Hinge

015120103
KC33097-002: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-01-512-0081
Sniper Rifl Bracket

015120081
99004A1530: RNCC: 3 | RNVC: 2
9900A1530: RNCC: 5 | RNVC: 9

20 Aug 2003

5340-01-511-8664
Mechanical Stop

015118664
751B20024: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-01-511-8585
Angle Bracket

015118585
380D511-1: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-01-511-8618
Bumper

015118618
CDSP5601-90: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-01-511-6950
Loop Clamp

015116950
NAS1712D18-35N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-6902
Retaining Strap

015116902
NAS1677D16-22N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-6936
Loop Clamp

015116936
NAS1712D28-23N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-3162
Plain Solid Disk

015113162
SV783858-1: RNCC: 3 | RNVC: 2
NV822201 FIND 6: RNCC: 3 | RNVC: 9

6 Aug 2003

5340-01-511-2151
Retaining Clip

015112151
8927650: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-01-510-9300
Aircraft Latch Assembly

015109300
173966: RNCC: 3 | RNVC: 2
173966: RNCC: 7 | RNVC: 2

29 Jul 2003

5340-01-510-9129
Seal Retaining Plate

015109129
17P2A3300-21: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-01-510-8921
Loop Clamp

29 Jul 2003

5340-01-510-8891
Loop Clamp

29 Jul 2003

5340-01-510-8233
Retaining Strap

015108233
39101569: RNCC: 3 | RNVC: 2
39101569: RNCC: 5 | RNVC: 9

26 Jul 2003

5340-01-510-7920
Mounting Bracket

015107920
K683145-3: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-01-510-7290
Loop Clamp

015107290
JM44CB1D6: RNCC: 3 | RNVC: 2

24 Jul 2003

5340-01-510-7244
Angle Bracket

015107244
858C10011-1: RNCC: 3 | RNVC: 2

24 Jul 2003

5340-01-510-7246
Angle Bracket

015107246
858C10011-2: RNCC: 3 | RNVC: 2

24 Jul 2003

5340-01-510-6506
Dust And Moisture Seal Protective Plug

015106506
858C10029-1: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-6321
Access Cover

015106321
KC33160-043: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-6336
Access Cover

015106336
K682013-11: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-6323
Access Cover

015106323
KC33160-045: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-6311
Access Cover

015106311
KC79223-002: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-6308
Access Cover

015106308
KC79223-001: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-01-510-5276
Mounting Bracket

015105276
14201808: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-01-510-4810
Rod End Clevis

015104810
858D10030-31: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4667
Access Cover

015104667
KC79207-017: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4671
Angle Bracket

015104671
K656702-11: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4666
Angle Bracket

015104666
KC79207-019: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4669
Angle Bracket

015104669
K656702-19: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4670
Angle Bracket

015104670
K656702-13: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4653
Angle Bracket

015104653
70302-22141-104: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4652
Aircraft Structural Plate

21 Jul 2003

5340-01-510-4329
Aircra Cap Assembly

015104329
24077-307: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-01-510-4288
Mounting Bracket

21 Jul 2003

5340-01-510-4286
Mounting Bracket

21 Jul 2003

5340-01-510-4109
Access Cover

015104109
47-43316: RNCC: 3 | RNVC: 1

21 Jul 2003

5340-01-510-4118
Access Cover

015104118
143521: RNCC: 3 | RNVC: 1

21 Jul 2003

5340-01-510-3670
Loop Clamp

015103670
JM44LC28WD2BB: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-01-510-0744
Hand Crank

14 Jul 2003

5340-01-510-0438
Dust And Moisture Seal Protective Plug

015100438
820-5295154PC3F2100-TAB: RNCC: 3 | RNVC: 1
5340-LL-N01-K452: RNCC: 5 | RNVC: 1
820-5295960-10: RNCC: 5 | RNVC: 1

11 Jul 2003

5340-01-510-0129
Angle Bracket

015100129
KC33058-011: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0145
Loop Clamp

015100145
JM44LC28WD24BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0146
Loop Clamp

015100146
JM44LC28WD33BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0138
Loop Clamp

015100138
JM44LC28WD16BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0139
Loop Clamp

015100139
JM44LC28WD10BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0141
Loop Clamp

015100141
JM44LC28WD28BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0140
Loop Clamp

015100140
JM44LC28WD21BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0144
Loop Clamp

015100144
JM44LC28WD3BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0142
Loop Clamp

015100142
JM44LC28WD26BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0143
Loop Clamp

015100143
JM44LC28WD25BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0136
Loop Clamp

015100136
JM44LC28WD13BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0137
Loop Clamp

015100137
JM44LC28WD14BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0033
Loop Clamp

015100033
JM44LC28WD9BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0034
Loop Clamp

015100034
JM44LC28WD8BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0089
Loop Clamp

015100089
JM44LC28WD22BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0091
Loop Clamp

015100091
JM44LC28WD19BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0092
Loop Clamp

015100092
JM44LC28WD5BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0087
Loop Clamp

015100087
JM44LC28WD15BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0088
Loop Clamp

015100088
JM44LC28WD23BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0090
Loop Clamp

015100090
JM44LC28WD20BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0042
Angle Bracket

015100042
KC33076-079: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0018
Loop Clamp

015100018
JM44LC28WD18BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0041
Angle Bracket

015100041
KC33076-081: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0031
Loop Clamp

015100031
JM44LC28WD7BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0020
Loop Clamp

015100020
JM44LC28WD32BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0032
Loop Clamp

015100032
JM44LC28WD6BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0030
Loop Clamp

015100030
JM44LC28WD4BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0022
Loop Clamp

015100022
JM44LC28WD29BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0023
Runner

015100023
K633097-11: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0021
Loop Clamp

015100021
JM44LC28WD30BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0017
Loop Clamp

015100017
JM44LC28WD11BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-510-0019
Loop Clamp

015100019
JM44LC28WD17BB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-01-509-9390
Access Cover

015099390
717536131-009: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-01-509-9313
Dust And Moisture Seal Protective Plug

015099313
820-5295154PC3F2300-TAB: RNCC: 3 | RNVC: 1
820-5295960-10: RNCC: 5 | RNVC: 1
5340-LL-N01-K453: RNCC: 5 | RNVC: 1

9 Jul 2003

5340-01-509-8918
Loop Clamp

015098918
JM44LC28WD12BB: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-01-509-8764
General Purpose Resilient Mount

015098764
33-83105: RNCC: 3 | RNVC: 2

7 Jul 2003

5340-01-509-8227
Retaining Strap

015098227
9359M66P242: RNCC: 3 | RNVC: 2

3 Jul 2003

5340-01-509-8026
Access Cover

015098026
717531025-069: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-01-509-7347
Block Rubber Residu

1 Jul 2003

5340-01-509-7159
Mounting Plate

015097159
717536145-009: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-01-509-7161
General Purpose Access Door

015097161
110769-100: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-01-509-6709
Standoff Bracket

30 Jun 2003

5340-01-509-6702
Standoff Bracket

30 Jun 2003

5340-01-509-6705
Standoff Bracket

30 Jun 2003

5340-01-509-4459
Mounting Bracket

015094459
7326476-3: RNCC: 3 | RNVC: 2

23 Jun 2003

5340-01-509-3218
Angle Bracket

015093218
3070182: RNCC: 3 | RNVC: 2
3070182: RNCC: 5 | RNVC: 2

19 Jun 2003

5340-01-509-2684
Loop Clamp

015092684
TA09102COR20CR: RNCC: 3 | RNVC: 2

17 Jun 2003

5340-01-509-2024
Retaining Strap

015092024
6395489: RNCC: 3 | RNVC: 2
6395489: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-01-509-1594
Nut And Bolt Retainer

015091594
K633015-289: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-01-509-1459
Mounting Bracket

015091459
857142T: RNCC: 3 | RNVC: 2
857142T: RNCC: C | RNVC: 1

13 Jun 2003

5340-01-509-0535
Mounting Plate

015090535
3409646: RNCC: 3 | RNVC: 2
3409646: RNCC: 3 | RNVC: 9

10 Jun 2003

5340-01-509-0532
Loop Clamp

015090532
3429940: RNCC: 3 | RNVC: 2
3429940: RNCC: 3 | RNVC: 9

10 Jun 2003

5340-01-508-9441
Angle Bracket

015089441
3415689: RNCC: 3 | RNVC: 2
3415689: RNCC: 3 | RNVC: 9

6 Jun 2003

5340-01-508-9388
Electronic Equipment Hardware Kit

015089388
3461318: RNCC: 3 | RNVC: 2
3461318: RNCC: 3 | RNVC: 9

6 Jun 2003

5340-01-508-9340
Webbing Strap

015089340
NTN7376: RNCC: 3 | RNVC: 2

6 Jun 2003

5340-01-508-9162
Flush Catch

015089162
H620-1S063D: RNCC: 3 | RNVC: 2

5 Jun 2003

5340-01-508-9104
Double Angle Bracket

015089104
3413682: RNCC: 3 | RNVC: 2
3413682: RNCC: 3 | RNVC: 9

5 Jun 2003

5340-01-508-8799
Loop Clamp

015088799
914-250S: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-01-508-8579
Bumper

015088579
K633015-281: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-01-508-8515
Spring

015088515
494289: RNCC: 3 | RNVC: 9

4 Jun 2003

5340-01-508-8509
Spring

015088509
494288: RNCC: 3 | RNVC: 9

4 Jun 2003

5340-01-508-8461
Webbing Strap

015088461
35289-1: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-01-508-7979
Spring Tension Clip

015087979
H360K2599: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-01-508-7308
Mounting Bracket

015087308
8I-2001: RNCC: 3 | RNVC: 2

2 Jun 2003

5340-01-508-7212
Loop Clamp

015087212
815WD28G: RNCC: 3 | RNVC: 2

30 May 2003

5340-01-508-6317
Padlock

015086317
3410636: RNCC: 3 | RNVC: 2
3410636: RNCC: 3 | RNVC: 9

28 May 2003

5340-01-508-5378
Mechanic Equipment Hardware Kit

015085378
95145: RNCC: 3 | RNVC: 2
03-0924: RNCC: 5 | RNVC: 1
5305NCM030752: RNCC: 5 | RNVC: 1

23 May 2003

5340-01-508-5382
Mechanic Equipment Hardware Kit

015085382
59229B: RNCC: 3 | RNVC: 2
03-0925: RNCC: 5 | RNVC: 1
5305NCM030753: RNCC: 5 | RNVC: 1
95008: RNCC: 5 | RNVC: 9

23 May 2003

5340-01-508-5484
Angle Bracket

015085484
3415658: RNCC: 3 | RNVC: 2
3415658: RNCC: 3 | RNVC: 9

23 May 2003

5340-01-508-5384
Mechanic Equipment Hardware Kit

015085384
95118: RNCC: 3 | RNVC: 2
5305NCM030750: RNCC: 5 | RNVC: 1
03-0922: RNCC: 5 | RNVC: 1

23 May 2003

5340-01-508-5418
Mounting Bracket

015085418
3009180-1: RNCC: 3 | RNVC: 2
3009180: RNCC: D | RNVC: 9

23 May 2003

5340-01-508-5304
Butt Hinge

015085304
7SA-000-0076: RNCC: 3 | RNVC: 9
7SA-000-0076: RNCC: C | RNVC: 1

22 May 2003

5340-01-508-5119
Mounting Bracket

015085119
221-1330-531: RNCC: 3 | RNVC: 2

22 May 2003

5340-01-508-5101
Angle Bracket

015085101
3415657: RNCC: 3 | RNVC: 2
3415657: RNCC: 3 | RNVC: 9

22 May 2003

5340-01-508-4645
Access Cover

015084645
K884044-013: RNCC: 3 | RNVC: 2

21 May 2003

5340-01-508-4639
Angle Bracket

015084639
KC79207-023: RNCC: 3 | RNVC: 2

21 May 2003

5340-01-508-4609
Retaining Strap

015084609
212-030-234-015: RNCC: 3 | RNVC: 2

21 May 2003

5340-01-508-3956

20 May 2003

5340-01-508-3836
Mounting Plate

015083836
S131088: RNCC: 3 | RNVC: 9

20 May 2003

5340-01-508-3391
Plain Solid Disk

015083391
10917-28: RNCC: 3 | RNVC: 2

19 May 2003

5340-01-508-3153
Angle Bracket

015083153
3465457: RNCC: 3 | RNVC: 2
3465457: RNCC: 3 | RNVC: 9

16 May 2003

5340-01-508-2676
Mounting Plate

015082676
3449790: RNCC: 3 | RNVC: 2
3449790: RNCC: 3 | RNVC: 9

15 May 2003

5340-01-508-2554
Dust And Moisture Seal Boot

015082554
3243863: RNCC: 3 | RNVC: 2
3243863: RNCC: 3 | RNVC: 9

15 May 2003

5340-01-508-2094
Loop Clamp

015082094
MS1919WCJ12: RNCC: 2 | RNVC: 2

14 May 2003

5340-01-508-2008
Mounting Bracket

015082008
3270408: RNCC: 3 | RNVC: 2
3270408: RNCC: 3 | RNVC: 9

14 May 2003

5340-01-508-1824
Mounting Bracket

015081824
A06-38590-000: RNCC: 3 | RNVC: 2
A06-38590: RNCC: D | RNVC: 9

14 May 2003

5340-01-508-1485
Mounting Plate

015081485
3449196: RNCC: 3 | RNVC: 2
3449196: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-1479
Mounting Bracket

015081479
3249866: RNCC: 3 | RNVC: 2
3249866: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-1478
Mounting Bracket

015081478
3246687: RNCC: 3 | RNVC: 2
3246687: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-1430
Blank Panel

015081430
3449666: RNCC: 3 | RNVC: 2
3449666: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-1416
Mounting Bracket

015081416
3270043: RNCC: 3 | RNVC: 2
3270043: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-1415
Mounting Bracket

015081415
3246690: RNCC: 3 | RNVC: 2
3246690: RNCC: 3 | RNVC: 9

13 May 2003

5340-01-508-0997
Mounting Bracket

015080997
3431896: RNCC: 3 | RNVC: 2
3431896: RNCC: 3 | RNVC: 9

12 May 2003

5340-01-508-0660
Rod End Clevis

015080660
6395379-5: RNCC: 3 | RNVC: 2
6395379-5: RNCC: 5 | RNVC: 2
5793211 FIND 32: RNCC: 5 | RNVC: 2
5793211: RNCC: D | RNVC: 9

12 May 2003

5340-01-508-0446
Access Cover

015080446
IHCCB: RNCC: 3 | RNVC: 2

12 May 2003

5340-01-508-0227
Mounting Bracket

015080227
3431886: RNCC: 3 | RNVC: 2
3431886: RNCC: 3 | RNVC: 9

9 May 2003

5340-01-507-9676
Access Cover

015079676
3671273F177-17: RNCC: 3 | RNVC: 2

8 May 2003

5340-01-507-9746
Mounting Bracket

015079746
3244591: RNCC: 3 | RNVC: 2
3244591: RNCC: 3 | RNVC: 9

9 May 2003

5340-01-507-9713
Turnbuckle Body

015079713
3671223F324-1: RNCC: 3 | RNVC: 2

8 May 2003

5340-01-507-9675
Rod End Connector

015079675
3671234C116-7: RNCC: 3 | RNVC: 2

8 May 2003

5340-01-507-9498
Mounting Bracket

015079498
3266441: RNCC: 3 | RNVC: 2
3266441: RNCC: 3 | RNVC: 9

8 May 2003

5340-01-507-9495
Mounting Bracket

015079495
3236684: RNCC: 3 | RNVC: 2
3236684: RNCC: 3 | RNVC: 9

8 May 2003

5340-01-507-9441
Loop Clamp

015079441
04-20945-000: RNCC: 3 | RNVC: 2

8 May 2003

5340-01-507-9388
Extension Drawer Slide Section

8 May 2003

5340-01-507-9284
Rim Lock Set

8 May 2003

NSN 5340-01-507-9273 015079273 NUT,PLAIN,CASTELLATED,HEXAGON

5340-01-507-9273
Hexagon Castellated Plain Nut

8 May 2003

5340-01-507-9239
Plain Solid Disk

015079239
10917-16: RNCC: 3 | RNVC: 2
10917: RNCC: D | RNVC: 9

8 May 2003

5340-01-507-9234
Plain Solid Disk

015079234
10917-14: RNCC: 3 | RNVC: 2
10917: RNCC: D | RNVC: 9

8 May 2003

5340-01-507-9052
Mounting Bracket

015079052
3428459: RNCC: 3 | RNVC: 2
3428459: RNCC: 3 | RNVC: 9

7 May 2003

5340-01-507-9066
Angle Bracket

015079066
1408530: RNCC: 3 | RNVC: 2
1408530: RNCC: 3 | RNVC: 9

7 May 2003

5340-01-507-9064
Mounting Bracket

015079064
1354730: RNCC: 3 | RNVC: 2
1354730: RNCC: 3 | RNVC: 9

7 May 2003

5340-01-507-9022
Mounting Plate

015079022
3465456: RNCC: 3 | RNVC: 2
3465456: RNCC: 3 | RNVC: 9

7 May 2003

5340-01-507-8697
Head Spreader Plate

7 May 2003

5340-01-507-8704
Com Station Bracket

7 May 2003

5340-01-507-8534
Access Cover

015078534
3671273F177-1: RNCC: 3 | RNVC: 2

6 May 2003

5340-01-507-8452
Loop Clamp

015078452
TA028M014HC24: RNCC: 3 | RNVC: 2

6 May 2003

5340-01-507-8431
Mounting Bracket

015078431
3270225: RNCC: 3 | RNVC: 2
3270225: RNCC: 3 | RNVC: 9

6 May 2003

5340-01-507-8438
Blank Panel

015078438
3374164: RNCC: 3 | RNVC: 2
3374164: RNCC: 3 | RNVC: 9
50030005: RNCC: 5 | RNVC: 2

6 May 2003

5340-01-507-8432
Mounting Bracket

015078432
3277950: RNCC: 3 | RNVC: 2
3277950: RNCC: 3 | RNVC: 9

6 May 2003

5340-01-507-8428
Mounting Bracket

015078428
3270226: RNCC: 3 | RNVC: 2
3270226: RNCC: 3 | RNVC: 9

6 May 2003

5340-01-507-8430
Mounting Bracket

015078430
3270191: RNCC: 3 | RNVC: 2
3270191: RNCC: 3 | RNVC: 9

6 May 2003

5340-01-507-8229
Mounting Bracket

015078229
3244768: RNCC: 3 | RNVC: 2
3244768: RNCC: 3 | RNVC: 9

6 May 2003

5340-01-507-8224
Access Cover

015078224
8197118G1: RNCC: 3 | RNVC: 2

6 May 2003

5340-01-507-8223
Access Cover

015078223
8197116G1: RNCC: 3 | RNVC: 2

6 May 2003

5340-01-507-7826
Mounting Plate

015077826
LS1014167: RNCC: 3 | RNVC: 2

6 May 2003

5340-01-507-7590
Liner Bracket

015077590
3403330: RNCC: 3 | RNVC: 2
3403330: RNCC: 3 | RNVC: 9

5 May 2003

5340-01-507-7540
Mounting Bracket

015077540
1317710: RNCC: 3 | RNVC: 2
1317710: RNCC: 3 | RNVC: 9

5 May 2003

5340-01-507-7246
Loop Clamp

015077246
ST1552-07: RNCC: 3 | RNVC: 2

3 May 2003

5340-01-507-7342
Webbing Strap

015077342
631E-18-138B: RNCC: 3 | RNVC: 2
80163-16-MS: RNCC: 3 | RNVC: 2

5 May 2003

5340-01-507-7229
Mounting Bracket

015077229
3617920-1: RNCC: 3 | RNVC: 2

2 May 2003

5340-01-507-7076
Loop Clamp

015077076
23-11357-006: RNCC: 3 | RNVC: 2

2 May 2003

5340-01-507-6924
Clamp

015076924
94146-002: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6612
Hinge

015076612
MS20257P5-1900: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6719
Band Clamp

015076719
901-325-2-5: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6691
Standoff

015076691
CB3001-CR-3-18: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6693
Nutplate Clickbond

015076693
CB4009C3RA: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6573
General Purpose Resilient Mount

015076573
AM009-2: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6557
Nutplate

015076557
CB4023G3CR24: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6526
Loop Clamp

015076526
AS21919WCJ08: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6488
Seal Plate

015076488
3671263L112-1: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6533
Loop Clamp

015076533
AS21919WCJ06: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6530
Mounting Hardware

015076530
687-152-03: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6527
Loop Clamp

1 May 2003

5340-01-507-6441
Turnbuckle Assembly

015076441
3671234C114-301: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6431
Turnbuckle Assembly

015076431
3671234C114-9: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-5967
Mounting Plate

015075967
3464370: RNCC: 3 | RNVC: 2
3464370: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6110
Trun Strap Assembly

015076110
2330-52-263: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-6115
T-Bo Strap Assembly

015076115
2334-52-700S: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-5973
Double Angle Bracket

015075973
3460065: RNCC: 3 | RNVC: 2
3460065: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5962
Angle Bracket

015075962
3456167: RNCC: 3 | RNVC: 2
3456167: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6026
Loop Clamp

015076026
3382727: RNCC: 3 | RNVC: 2
3382727: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6014
Kick Door Plate

015076014
3378507: RNCC: 3 | RNVC: 2
3378507: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6016
Mounting Bracket

015076016
3375171: RNCC: 3 | RNVC: 2
3375171: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6019
Mounting Bracket

015076019
3375172: RNCC: 3 | RNVC: 2
3375172: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-6013
Kick Door Plate

015076013
3378508: RNCC: 3 | RNVC: 2
3378508: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5970
Mounting Plate

015075970
3461366: RNCC: 3 | RNVC: 2
3461366: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5974
Mounting Plate

015075974
3453960: RNCC: 3 | RNVC: 2
3453960: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5966
Angle Bracket

015075966
3464369: RNCC: 3 | RNVC: 2
3464369: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5933
Mounting Bracket

015075933
3373203: RNCC: 3 | RNVC: 2
3373203: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5950
Loop Clamp

015075950
3394336: RNCC: 3 | RNVC: 2
3394336: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5937
Mounting Bracket

015075937
3432661: RNCC: 3 | RNVC: 2
3432661: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5914
Mounting Bracket

015075914
3389409: RNCC: 3 | RNVC: 2
3389409: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5915
General Purpose Access Door

015075915
3397174: RNCC: 3 | RNVC: 2
3397174: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5762
Loop Clamp

015075762
211-501-9658: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5758
Loop Clamp

015075758
211-501-9654: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5791
General Purpose Access Door

015075791
54539417: RNCC: 3 | RNVC: 2
54539417: RNCC: C | RNVC: 1

1 May 2003

5340-01-507-5764
Loop Clamp

015075764
211-501-9662: RNCC: 3 | RNVC: 9

1 May 2003

5340-01-507-5650
Mounting Bracket

015075650
36002518: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-507-5358
Mounting Bracket

015075358
3378501: RNCC: 3 | RNVC: 2
3378501: RNCC: 3 | RNVC: 9

30 Apr 2003

5340-01-507-5327
Synchro Clamp

015075327
3372422: RNCC: 3 | RNVC: 2
3372422: RNCC: 3 | RNVC: 9

30 Apr 2003

5340-01-507-5275
Angle Bracket

015075275
3381733: RNCC: 3 | RNVC: 2
3381733: RNCC: 3 | RNVC: 9

30 Apr 2003

5340-01-507-5228
General Purpose Resilient Mount

015075228
81523M: RNCC: 3 | RNVC: 2
25-81523M: RNCC: 5 | RNVC: 9

30 Apr 2003

Load More Results