What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 27 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 27 of 1045

5340-01-691-3097
Mounting Bracket

016913097
12617751: RNCC: 3 | RNVC: 2

2 Oct 2020

5340-01-691-2918
Mounting Bracket

016912918
12617516: RNCC: 3 | RNVC: 2

1 Oct 2020

5340-01-691-1737
Access Cover

016911737
12617663: RNCC: 3 | RNVC: 2

24 Sep 2020

5340-01-691-1725
Access Cover

016911725
12617662: RNCC: 3 | RNVC: 2

24 Sep 2020

5340-01-691-1959
Access Cover

016911959
12617664: RNCC: 3 | RNVC: 2

25 Sep 2020

5340-01-691-1970
Access Cover

016911970
12617752: RNCC: 3 | RNVC: 2

25 Sep 2020

5340-01-690-0948
Spring Tension Clip

016900948
2310025: RNCC: 3 | RNVC: 1

25 Jul 2020

5340-01-687-4088
Headless Straight Rod

016874088
LG4CBA0500F: RNCC: 3 | RNVC: 1

31 Mar 2020

5340-01-686-8164
Access Cover

016868164
74G800739-1005: RNCC: 3 | RNVC: 2

5 Mar 2020

5340-01-685-2560
Access Cover

016852560
71321206-001: RNCC: 3 | RNVC: 2

9 Dec 2019

5340-01-685-0378
Manual Control Lever

016850378
140T2963-2: RNCC: 3 | RNVC: 2

25 Nov 2019

5340-01-684-7862
Angle Bracket

016847862
287T0014-264: RNCC: 3 | RNVC: 2

16 Nov 2019

5340-01-684-7865
Grooved Clamp Coupling Ferrule

016847865
BACF22U: RNCC: 3 | RNVC: 2

16 Nov 2019

5340-01-684-3744
Pipe Covering Protection Saddle

016843744
BACC10ME20-1: RNCC: 3 | RNVC: 1

31 Oct 2019

5340-01-684-0885
Handle Grip

016840885
4359749: RNCC: 3 | RNVC: 2

21 Oct 2019

5340-01-682-8673
Loop Clamp

016828673
MS25281-F10: RNCC: 2 | RNVC: 2

27 Aug 2019

5340-01-682-7386
No Item Name Available

21 Aug 2019

5340-01-682-2658
Helical Compression Spring Seat

016822658
40140140: RNCC: 3 | RNVC: 2
40140140: RNCC: 5 | RNVC: 2

30 Jul 2019

5340-01-680-9340
Headless Straight Rod

016809340
963-B10023-3IN-17: RNCC: 3 | RNVC: 2

29 May 2019

5340-01-679-7106
Mounting Plate

016797106
A3332706: RNCC: 3 | RNVC: 2

8 Apr 2019

5340-01-678-8903
Spacing Threaded Standoff

016788903
AJW-147-8716124: RNCC: 3 | RNVC: 2

4 Mar 2019

5340-01-678-7664
Mounting Bracket

25 Feb 2019

5340-01-678-7292
No Item Name Available

22 Feb 2019

5340-01-678-0223
Safety Cable Kit

016780223
A10-218-ENV: RNCC: 3 | RNVC: 2

17 Jan 2019

5340-01-677-4002
Mounting Plate

016774002
8592540-115: RNCC: 3 | RNVC: 2
245-8592536 FN 4: RNCC: C | RNVC: 1
245-8592540 FN 15: RNCC: C | RNVC: 1

12 Dec 2018

5340-01-677-3848
Mounting Plate

016773848
8592540-124: RNCC: 3 | RNVC: 2
245-8592536 FN 513: RNCC: C | RNVC: 1
245-8592540 FN 23: RNCC: C | RNVC: 1

11 Dec 2018

5340-01-677-3360
Mounting Plate

016773360
8592730-100: RNCC: 3 | RNVC: 2
562-8592730 FN 700: RNCC: C | RNVC: 1
562-8592730: RNCC: D | RNVC: 9

10 Dec 2018

5340-01-676-9279
Rod End Connector

016769279
8592250-101: RNCC: 3 | RNVC: 2
561-8592250 FN 202: RNCC: C | RNVC: 1

20 Nov 2018

5340-01-675-6325
Webbing Strap

016756325
343-1-014: RNCC: 3 | RNVC: 2
310-0-011 REV - ITEM NO. 8: RNCC: C | RNVC: 1

19 Sep 2018

5340-01-673-5990
No Item Name Available

19 Jun 2018

5340-01-672-1387
Loop Clamp

016721387
Q-53138: RNCC: 3 | RNVC: 2
22KP869: RNCC: 7 | RNVC: 2

23 Apr 2018

5340-01-671-1253
Mounting Bracket

016711253
56B23609-1: RNCC: 3 | RNVC: 2

15 Mar 2018

5340-01-670-0312
Dust And Moisture Seal Protective Cap

016700312
70M0000565-001: RNCC: 3 | RNVC: 2

1 Feb 2018

5340-01-669-7931
Webbing Strap

016697931
D81-1570-000: RNCC: 3 | RNVC: 2

22 Jan 2018

5340-01-669-4783
Loop Clamp

016694783
ST1540-07: RNCC: 3 | RNVC: 1

9 Jan 2018

5340-01-667-8541
Loop Clamp

016678541
AS7351DC80: RNCC: 3 | RNVC: 1
AS7351DC80: RNCC: 3 | RNVC: 9

1 Nov 2017

5340-01-667-5795
Dust And Moisture Seal Protective Cover

016675795
MIL-001-1082: RNCC: 3 | RNVC: 2

23 Oct 2017

5340-01-667-5910
No Item Name Available

24 Oct 2017

5340-01-667-3039
Retaining Strap

016673039
245-7108670 ITEM 38: RNCC: 3 | RNVC: 2
7108670-38: RNCC: 5 | RNVC: 2

11 Oct 2017

5340-01-665-4084
Bolt And Spacer Kit

28 Jul 2017

5340-01-665-3369
Loop Clamp

26 Jul 2017

5340-01-665-1867
Pawl Fastener

21 Jul 2017

5340-01-664-8996
Mounting Bracket

11 Jul 2017

5340-01-664-5610
Loop Clamp

016645610
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG4: RNCC: 3 | RNVC: 2
AS21919WCG4: RNCC: 3 | RNVC: 9

23 Jun 2017

5340-01-664-2249
Cover Strip

016642249
S21012-11DGE: RNCC: 3 | RNVC: 1

10 Jun 2017

5340-01-664-0887
Cover Strip

016640887
S21012-83DGE: RNCC: 3 | RNVC: 1

5 Jun 2017

5340-01-663-6668
Hull Accessory Kit

016636668
57K6468: RNCC: 3 | RNVC: 2

17 May 2017

5340-01-663-3850
Loop Clamp

016633850
NAS1715C16SWH: RNCC: 3 | RNVC: 2

8 May 2017

5340-01-662-8459
Clamp Bolt Assembly

20 Apr 2017

5340-01-662-7694
Butt Hinge

19 Apr 2017

5340-01-662-5931
Horn Bag

12 Apr 2017

5340-01-662-5419
Mounting Bracket

11 Apr 2017

5340-01-662-0595
Mounting Bracket

016620595
6631596-1: RNCC: 3 | RNVC: 2
6631588: RNCC: 5 | RNVC: 2

24 Mar 2017

5340-01-661-9412
Mounting Bracket

016619412
76110-OPT1: RNCC: 3 | RNVC: 2

21 Mar 2017

5340-01-661-8710
Angle Bracket

016618710
61608F1208: RNCC: 3 | RNVC: 2

17 Mar 2017

5340-01-661-8771
Angle Bracket

016618771
61608F1207: RNCC: 3 | RNVC: 2

17 Mar 2017

5340-01-661-7348
Access Cover

016617348
6631607-1: RNCC: 3 | RNVC: 2

14 Mar 2017

5340-01-661-6488
Utility Access Door

016616488
04-21271: RNCC: 3 | RNVC: 2

10 Mar 2017

5340-01-661-6260
Mounting Bracket

016616260
57T711-01: RNCC: 3 | RNVC: 1

10 Mar 2017

5340-01-661-5196
Access Cover

016615196
A52569: RNCC: 3 | RNVC: 1

6 Mar 2017

5340-01-661-3312
Rod End Clevis

016613312
251T2128-1: RNCC: 3 | RNVC: 1

27 Feb 2017

5340-01-661-0931
Angle Bracket

016610931
311T3065Y20: RNCC: 3 | RNVC: 1

15 Feb 2017

5340-01-661-0822
Utility Access Door

016610822
04-20601: RNCC: 3 | RNVC: 2

15 Feb 2017

5340-01-661-0566
Access Door Hinge

016610566
148T6404U4: RNCC: 3 | RNVC: 1

14 Feb 2017

5340-01-660-9186
Mounting Bracket

016609186
G67BC: RNCC: 3 | RNVC: 2

9 Feb 2017

5340-01-660-7776
Access Cover

016607776
6631815-1: RNCC: 3 | RNVC: 2

2 Feb 2017

5340-01-660-1922
Mounting Plate

016601922
13021254: RNCC: 3 | RNVC: 2

10 Jan 2017

5340-01-659-2991
Mounting Plate

016592991
12603267: RNCC: 3 | RNVC: 2
12603267: RNCC: 3 | RNVC: 2

16 Nov 2016

5340-01-659-0573
Loop Clamp

016590573
VT10382B03-3BECP: RNCC: 3 | RNVC: 2
12602005: RNCC: 5 | RNVC: 2
12602005: RNCC: 5 | RNVC: 2

1 Nov 2016

5340-01-658-9733
Loop Clamp

016589733
MS21919CE5: RNCC: 2 | RNVC: 2
MS21919: RNCC: 4 | RNVC: 1

27 Oct 2016

5340-01-658-8352
Spring Tension Clip

016588352
1001-BLACK: RNCC: 3 | RNVC: 2
4231320: RNCC: 7 | RNVC: 2

20 Oct 2016

5340-01-658-8959
Mounting Bracket

016588959
1611AS11421-99: RNCC: 3 | RNVC: 2

25 Oct 2016

5340-01-658-7211
Loop Clamp

016587211
EYZP224: RNCC: 3 | RNVC: 2

13 Oct 2016

5340-01-658-6015
Retaining Strap

016586015
2002375-1: RNCC: 3 | RNVC: 2

5 Oct 2016

5340-01-658-5537
Webbing Strap

016585537
4224983: RNCC: 3 | RNVC: 2

3 Oct 2016

5340-01-657-9726
Rod End Clevis

016579726
A25003-6: RNCC: 3 | RNVC: 2

7 Sep 2016

5340-01-657-8533
Rigid Caster

016578533
12-SN-08401-R-FCB12: RNCC: 3 | RNVC: 9

31 Aug 2016

5340-01-657-3883
Rim Lock Set

016573883
3310: RNCC: 3 | RNVC: 2
3310: RNCC: 5 | RNVC: 2

10 Aug 2016

5340-01-656-3480
Hose Saddle Assembly

016563480
272T6129-3: RNCC: 3 | RNVC: 1

27 Jun 2016

5340-01-656-0829
Mounting Plate

016560829
2096-052-02: RNCC: 3 | RNVC: 2
2546-630-40: RNCC: D | RNVC: 9

16 Jun 2016

5340-01-656-1366
Nut And Bolt Retainer

016561366
4132042-1: RNCC: 3 | RNVC: 1

18 Jun 2016

5340-01-655-9338
Angle Bracket

016559338
344T2202-25: RNCC: 3 | RNVC: 1

11 Jun 2016

5340-01-655-9664
Rod End Locking Retainer

016559664
SLR4001-5AC: RNCC: 3 | RNVC: 1

13 Jun 2016

5340-01-655-7022
Compression Cup

016557022
4008P15J11525: RNCC: 3 | RNVC: 1

6 Jun 2016

5340-01-655-6582
Helical Compression Spring Retainer

016556582
3801116-101: RNCC: 3 | RNVC: 1

4 Jun 2016

5340-01-655-5255
Cover Strip

016555255
411T4500-1262: RNCC: 3 | RNVC: 1

31 May 2016

5340-01-655-5529
Mounting Bracket

016555529
68629-40088-1: RNCC: 3 | RNVC: 2

1 Jun 2016

5340-01-655-5161
Mounting Bracket

016555161
8573073: RNCC: 3 | RNVC: 2
8573073: RNCC: 5 | RNVC: 2

31 May 2016

5340-01-655-4658
Mounting Bracket

016554658
349T2202-88: RNCC: 3 | RNVC: 1

28 May 2016

5340-01-655-4124
Extension Drawer Slide

016554124
A5220-09PV-001: RNCC: 3 | RNVC: 1

26 May 2016

5340-01-655-4127
Extension Drawer Slide

016554127
A5220-09PV-002: RNCC: 3 | RNVC: 1

26 May 2016

5340-01-655-4068
Mounting Bracket

016554068
453T7361-99A: RNCC: 3 | RNVC: 1

26 May 2016

5340-01-655-2960
Loop Clamp

016552960
344T2200-125: RNCC: 3 | RNVC: 1

23 May 2016

5340-01-655-2673
Utility Access Door

016552673
2546-007-000: RNCC: 3 | RNVC: 2
2546-007-008: RNCC: 5 | RNVC: 2

23 May 2016

5340-01-655-2397
Cover Strip

016552397
453T7358-25B: RNCC: 3 | RNVC: 1

23 May 2016

5340-01-655-2430
Access Cover

016552430
S21012-75DGE: RNCC: 3 | RNVC: 1

23 May 2016

5340-01-655-1696
Cover Strip

016551696
453T7309-50B: RNCC: 3 | RNVC: 1

19 May 2016

5340-01-655-1648
Cover Strip

016551648
453T7309-52B: RNCC: 3 | RNVC: 1

19 May 2016

5340-01-655-1643
Cover Strip

016551643
453T7309-51B: RNCC: 3 | RNVC: 1

19 May 2016

5340-01-655-1173
Cover Strip

016551173
453T7358-34B: RNCC: 3 | RNVC: 1

18 May 2016

5340-01-654-9826
Mounting Bracket

16 May 2016

5340-01-654-9848
Mounting Bracket

16 May 2016

5340-01-654-9856
Mounting Bracket

16 May 2016

5340-01-654-9842
Mounting Bracket

16 May 2016

5340-01-654-9099
Mounting Bracket

12 May 2016

5340-01-654-9092
Mounting Bracket

12 May 2016

5340-01-654-8708
Double Angle Bracket

016548708
411T3094-88: RNCC: 3 | RNVC: 1

11 May 2016

5340-01-654-8704
Double Angle Bracket

016548704
411T3094-87: RNCC: 3 | RNVC: 1

11 May 2016

5340-01-654-8314
Antipilferage Seal

016548314
911H: RNCC: 3 | RNVC: 1

10 May 2016

5340-01-654-8223
Dust And Moisture Seal Protective Cover

016548223
140W4052-4: RNCC: 3 | RNVC: 1

10 May 2016

5340-01-654-7891
Mounting Bracket

016547891
14330-245: RNCC: 3 | RNVC: 1

9 May 2016

5340-01-654-6561
Cargo Lock Assy

016546561
86372-11: RNCC: 3 | RNVC: 1

4 May 2016

5340-01-654-5402
Lock Fitting Set

016545402
15801-140-2: RNCC: 3 | RNVC: 1

2 May 2016

5340-01-654-2407
Cargo Lock Assy

016542407
86310-25: RNCC: 3 | RNVC: 1

22 Apr 2016

5340-01-654-2115
Cargo Lock Assy

016542115
86310-27: RNCC: 3 | RNVC: 1

20 Apr 2016

5340-01-654-1190
Mechanical Stop

016541190
161T2028-3: RNCC: 3 | RNVC: 1

18 Apr 2016

5340-01-654-0234
Suction Cup

016540234
430-1016-001: RNCC: 3 | RNVC: 2

14 Apr 2016

5340-01-653-9578
Access Cover

016539578
275A5310-5: RNCC: 3 | RNVC: 2

12 Apr 2016

5340-01-653-7489
Access Cover

016537489
2D7006-13DNT: RNCC: 3 | RNVC: 1

4 Apr 2016

5340-01-653-7444
Access Cover

016537444
S21012-61DGE: RNCC: 3 | RNVC: 1

4 Apr 2016

5340-01-653-7091
Cover Assy Kc46

016537091
2D7008-13DNT: RNCC: 3 | RNVC: 1

2 Apr 2016

5340-01-653-6256
Mounting Plate

016536256
148T6559-38: RNCC: 3 | RNVC: 1

30 Mar 2016

5340-01-653-6219
Access Cover

016536219
7552764: RNCC: 3 | RNVC: 1

30 Mar 2016

5340-01-653-5115
Panel-Toilet Seat

016535115
D72W59064-112A: RNCC: 3 | RNVC: 9
D72W59064-112A: RNCC: C | RNVC: 1

25 Mar 2016

5340-01-653-2964
Tie Down Adapter

016532964
141T6555-6: RNCC: 3 | RNVC: 1

17 Mar 2016

5340-01-653-1927
Multiple Angle Bracket

016531927
232T8024-21: RNCC: 3 | RNVC: 1

14 Mar 2016

5340-01-653-1898
Butt Hinge

016531898
148T6404U1: RNCC: 3 | RNVC: 1

14 Mar 2016

5340-01-653-0869
Special Purpose Retainer

016530869
114T6110-8: RNCC: 3 | RNVC: 1

10 Mar 2016

5340-01-653-0898
Dust And Moisture Seal Protective Cover

016530898
BACC50AL1A: RNCC: 3 | RNVC: 1

10 Mar 2016

5340-01-653-0436
Cover Retainer

016530436
BACC50AP3: RNCC: 3 | RNVC: 2

10 Mar 2016

5340-01-652-9222
Mechanical Stop

016529222
70217-01010-129: RNCC: 3 | RNVC: 2
70217-01010: RNCC: D | RNVC: 9

8 Mar 2016

5340-01-652-8192
Combination Lock Set

016528192
FF-L-2890B TY II STRIKE 2 STYL 2: RNCC: 2 | RNVC: 2
FF-L-2890B: RNCC: 4 | RNVC: 1
FF-L-2740B: RNCC: 5 | RNVC: 1
2890-522: RNCC: 5 | RNVC: 1

4 Mar 2016

5340-01-652-6815
Mounting Bracket

016526815
8361638-1: RNCC: 3 | RNVC: 2

1 Mar 2016

5340-01-652-5298
Mounting Bracket

016525298
254W4104-3: RNCC: 3 | RNVC: 1

25 Feb 2016

5340-01-652-6453
Loop Clamp

016526453
BACC10BU29DF: RNCC: 3 | RNVC: 1

29 Feb 2016

5340-01-652-5361
Loop Clamp

016525361
BACC10BR8200: RNCC: 3 | RNVC: 1

25 Feb 2016

5340-01-652-5317
Mounting Bracket

016525317
284T0942-20: RNCC: 3 | RNVC: 1

25 Feb 2016

5340-01-652-4680
Mounting Bracket

016524680
272T6211-2: RNCC: 3 | RNVC: 1

23 Feb 2016

5340-01-652-0218
Utility Guard Rail Section

8 Feb 2016

5340-01-651-3491
Angle Bracket

14 Jan 2016

5340-01-651-1499
Access Cover

016511499
70219-02141-049: RNCC: 3 | RNVC: 2

6 Jan 2016

5340-01-651-1258
Manual Control Handle

016511258
LS1077953: RNCC: 3 | RNVC: 2

5 Jan 2016

5340-01-651-0548
Crank Handle

016510548
53676-5: RNCC: 3 | RNVC: 1

2 Jan 2016

5340-01-650-9834
Bumper

016509834
3113576C1: RNCC: 3 | RNVC: 2

24 Dec 2015

5340-01-650-5396
Retaining Clip

016505396
184T1005-3: RNCC: 3 | RNVC: 1

8 Dec 2015

5340-01-650-6856
Access Cover

016506856
10253698-29: RNCC: 3 | RNVC: 2

15 Dec 2015

5340-01-650-3898
Antipilferage Seal Locking Wire

016503898
302-8500407 ITEM 017-1: RNCC: 3 | RNVC: 1
302-8500407 ITEM 014-1: RNCC: 3 | RNVC: 2

1 Dec 2015

5340-01-650-2742
Loop Clamp

016502742
ST1428-25: RNCC: 3 | RNVC: 1

24 Nov 2015

5340-01-650-2407
Loop Clamp

016502407
BACC10GY300: RNCC: 3 | RNVC: 1

23 Nov 2015

5340-01-650-1008
Special Bracket Assembly

016501008
161A2110-2: RNCC: 3 | RNVC: 2

18 Nov 2015

5340-01-649-9685
Loop Clamp

17 Nov 2015

5340-01-650-0369
Nut And Bolt Retainer

016500369
217T1436-2: RNCC: 3 | RNVC: 2

18 Nov 2015

5340-01-649-6977
Lock-Release Lever

016496977
12580358: RNCC: 3 | RNVC: 2

6 Nov 2015

5340-01-649-3305
Retaining Clip

016493305
184T1005-1: RNCC: 3 | RNVC: 1

26 Oct 2015

5340-01-649-3532
Mounting Bracket

27 Oct 2015

5340-01-648-8915
Loop Clamp

016488915
TA0930034-16: RNCC: 3 | RNVC: 2

9 Oct 2015

5340-01-648-9014
Loop Clamp

016489014
234-591-9300: RNCC: 3 | RNVC: 2

9 Oct 2015

5340-01-648-8739
Butt Hinge

016488739
113A8248-6: RNCC: 3 | RNVC: 2

9 Oct 2015

5340-01-648-8737
Butt Hinge

016488737
113A8248-2: RNCC: 3 | RNVC: 2

9 Oct 2015

5340-01-648-7826
Mounting Bracket

6 Oct 2015

5340-01-648-6548
Retaining Strap

016486548
BACC10GF40C: RNCC: 3 | RNVC: 2

30 Sep 2015

5340-01-648-6394
Mounting Bracket

30 Sep 2015

5340-01-648-5630
Loop Clamp

016485630
BACC10GF40D: RNCC: 3 | RNVC: 2

28 Sep 2015

5340-01-648-5214
Mounting Bracket

28 Sep 2015

5340-01-648-4203
Mounting Plate

23 Sep 2015

5340-01-648-1529
Loop Clamp

16 Sep 2015

5340-01-648-2596
Cushioning Pad

19 Sep 2015

5340-01-648-2593
Cushioning Pad

19 Sep 2015

5340-01-648-2585
Loop Holder

19 Sep 2015

5340-01-647-8995
Engine Plate

5 Sep 2015

5340-01-647-6213
Dust And Moisture Seal Protective Cover

016476213
74D110608-1005: RNCC: 3 | RNVC: 2
74D110608-1005: RNCC: 5 | RNVC: 9

26 Aug 2015

5340-01-647-5661
Mounting Bracket

016475661
4187686: RNCC: 3 | RNVC: 2

25 Aug 2015

5340-01-647-4729
Plastic Filler Block

22 Aug 2015

5340-01-646-9990
Padlock Set

016469990
A-A-59487: RNCC: 4 | RNVC: 1
A-A-59487-2SS: RNCC: 4 | RNVC: 1

7 Aug 2015

5340-01-646-9962
Padlock Set

016469962
A-A-59487: RNCC: 4 | RNVC: 1
A-A-59487-2SS: RNCC: 4 | RNVC: 1

7 Aug 2015

5340-01-646-9982
Padlock Set

016469982
A-A-59487-2SS: RNCC: 4 | RNVC: 1
A-A-59487: RNCC: 4 | RNVC: 1

7 Aug 2015

5340-01-646-9388
Louver Plt (Frt Dr)

016469388
482423: RNCC: 3 | RNVC: 1

5 Aug 2015

5340-01-646-9384
Louver Plate (Side)

016469384
482422: RNCC: 3 | RNVC: 1

5 Aug 2015

5340-01-646-9005
Retaining Strap

4 Aug 2015

5340-01-646-8600
Retaining Clip

016468600
69-38947-7: RNCC: 3 | RNVC: 2

3 Aug 2015

5340-01-646-8324
Vent Plug

016468324
MIL-DTL-18866J/SIZE 1.250: RNCC: 2 | RNVC: 2

31 Jul 2015

5340-01-646-8042
Sliding Door Track

016468042
70207-02727-074: RNCC: 3 | RNVC: 2

30 Jul 2015

5340-01-646-6168
Latch P79

016466168
2940074: RNCC: 3 | RNVC: 2
2940074: RNCC: 5 | RNVC: 2
2940074: RNCC: 5 | RNVC: 2

27 Jul 2015

5340-01-646-2952
Retaining Clip

016462952
HLM-01-TN: RNCC: 3 | RNVC: 2

17 Jul 2015

5340-01-645-7310
Loop Clamp

016457310
30-302-2D10J07: RNCC: 3 | RNVC: 2

25 Jun 2015

5340-01-645-3758
Corner Brace

016453758
TGSICIW: RNCC: 3 | RNVC: 2
TGSICIW: RNCC: 5 | RNVC: 2

12 Jun 2015

5340-01-645-2163
Buckle

016452163
71017/3: RNCC: 3 | RNVC: 2

8 Jun 2015

5340-01-644-9149
Sliding Door Track

016449149
70207-02727-073: RNCC: 3 | RNVC: 2
70207-02727: RNCC: D | RNVC: 9

27 May 2015

5340-01-644-6153
Mounting Bracket

13 May 2015

5340-01-644-4221
Mounting Bracket

5 May 2015

5340-01-644-2981
Mounting Plate

016442981
24934A-00: RNCC: 3 | RNVC: 2
24934A-00: RNCC: 3 | RNVC: 9

29 Apr 2015

5340-01-644-2812
Mounting Plate

29 Apr 2015

5340-01-643-7954
Spacing Threaded Standoff

016437954
74D290601-2011: RNCC: 3 | RNVC: 2

13 Apr 2015

5340-01-643-7430
Emf Shield

016437430
7519561-1: RNCC: 3 | RNVC: 2

11 Apr 2015

5340-01-643-7575
Buckle

11 Apr 2015

5340-01-643-6063
Lock-Release Lever

016436063
12578088: RNCC: 3 | RNVC: 2

7 Apr 2015

5340-01-643-5061
Mounting Plate

016435061
12578113: RNCC: 3 | RNVC: 2

3 Apr 2015

5340-01-642-8735
Utility Resilient Mount

016428735
0014-18-0036: RNCC: 3 | RNVC: 2
07011P3118: RNCC: 7 | RNVC: 2

12 Mar 2015

5340-01-642-5936
Snap Hook

3 Mar 2015

5340-01-642-4354
Autolock

25 Feb 2015

5340-01-642-4236
Handwheel

25 Feb 2015

5340-01-641-7080
Loop Clamp

29 Jan 2015

5340-01-641-3899
Flare Lock Fastener

016413899
20-101 LWN: RNCC: 3 | RNVC: 2

20 Jan 2015

5340-01-641-0727
Mounting Bracket

016410727
4133094: RNCC: 3 | RNVC: 2
4133094: RNCC: D | RNVC: 9

8 Jan 2015

5340-01-640-7407
Coating Plate

016407407
17-3-2587-1: RNCC: 3 | RNVC: 2
17-3-2587: RNCC: D | RNVC: 9

19 Dec 2014

5340-01-633-8298
Leakproof Seal Plug

5 Dec 2014

5340-01-633-6160
Dust And Moisture Seal Boot

016336160
17P6W9851-1: RNCC: 3 | RNVC: 2

25 Nov 2014

5340-01-632-9242
Electrical Panel Mo

3 Nov 2014

5340-01-632-8143
Clamp Bolt Assembly

016328143
6CB-11478-00-00: RNCC: 3 | RNVC: 2

30 Oct 2014

5340-01-632-7810
Mounting Bracket

016327810
12571636: RNCC: 3 | RNVC: 2

29 Oct 2014

5340-01-632-7073
Clamp Bolt Assembly

016327073
BACC30AB: RNCC: 3 | RNVC: 2

28 Oct 2014

5340-01-632-7069
Loop Clamp

016327069
BACC100K5: RNCC: 3 | RNVC: 2

28 Oct 2014

5340-01-632-5694
Clamp Bolt Assembly

016325694
BACC30BK: RNCC: 3 | RNVC: 2

23 Oct 2014

5340-01-632-4717
Mounting Bracket

016324717
R4-EM-52: RNCC: 3 | RNVC: 2
J-R4-EM-52: RNCC: D | RNVC: 9

21 Oct 2014

5340-01-632-4215
Angle Bracket

016324215
74A522571-2037: RNCC: 3 | RNVC: 2

17 Oct 2014

5340-01-632-4643
Bumper

016324643
V-06-001-104: RNCC: 3 | RNVC: 2

21 Oct 2014

5340-01-632-4639
Bumper

016324639
V-06-001-102: RNCC: 3 | RNVC: 2

21 Oct 2014

5340-01-632-4563
Mortise Latch

016324563
R4-EM-12-162: RNCC: 3 | RNVC: 2

20 Oct 2014

5340-01-632-2580
Multiple Angle Bracket

016322580
512727: RNCC: 3 | RNVC: 2

14 Oct 2014

5340-01-632-1535
Caster Wheel

016321535
16-007: RNCC: 3 | RNVC: 2

9 Oct 2014

5340-01-631-8808
Utility Resilient Mount

016318808
8241104: RNCC: 3 | RNVC: 2

30 Sep 2014

5340-01-631-4535
Access Cover

016314535
8241181: RNCC: 3 | RNVC: 2

15 Sep 2014

5340-01-631-4078
Loop Clamp

016314078
AS21919DG6: RNCC: 3 | RNVC: 2
AS21919DG6: RNCC: 3 | RNVC: 9

12 Sep 2014

5340-01-631-3877
Mechanical Stop

016313877
8197479: RNCC: 3 | RNVC: 2

11 Sep 2014

5340-01-631-1961
Mounting Bracket

016311961
SB-360BK+: RNCC: 3 | RNVC: 2

4 Sep 2014

5340-01-630-8051
Access Cover

016308051
2189-853778A12: RNCC: 3 | RNVC: 2
2189-853778A12: RNCC: 5 | RNVC: 2

19 Aug 2014

5340-01-630-5507
Loop Clamp

016305507
MS21919DE16: RNCC: 2 | RNVC: 2

8 Aug 2014

5340-01-630-5461
Loop Clamp

016305461
MS21919DE4: RNCC: 2 | RNVC: 2

8 Aug 2014

5340-01-630-5483
Loop Clamp

016305483
MS21919-5: RNCC: 2 | RNVC: 2

8 Aug 2014

5340-01-630-4191
Office Machine Lock

016304191
5340-00-NIB-0080: RNCC: 3 | RNVC: 2

4 Aug 2014

5340-01-630-2855
Mounting Plate

016302855
06A8172101: RNCC: 3 | RNVC: 2

30 Jul 2014

5340-01-630-1866
Dust And Moisture Seal Protective Plug

016301866
543 04 60-31: RNCC: 3 | RNVC: 2
CV203222: RNCC: 5 | RNVC: 2
543 04 60-31: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-2050
Mounting Bracket

016302050
7HB810: RNCC: 3 | RNVC: 2
7HB810: RNCC: 3 | RNVC: 9

29 Jul 2014

5340-01-630-1828
Mounting Bracket

016301828
542 20 23-11: RNCC: 3 | RNVC: 2
CV203179: RNCC: 5 | RNVC: 2
542 20 23-11: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-1738
Cushioning Pad

016301738
542 20 23-07: RNCC: 3 | RNVC: 2
542 20 23-07: RNCC: 5 | RNVC: 2
CV203178: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-1770
Mechanic Equipment Hardware Kit

016301770
542 20 23-20: RNCC: 3 | RNVC: 2
542 20 23-20: RNCC: 5 | RNVC: 2
CV203180: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-1703
Mounting Bracket

016301703
542 20 21-66: RNCC: 3 | RNVC: 2
542 20 21-66: RNCC: 5 | RNVC: 2
CV203165: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-1708
Mounting Plate

016301708
542 20 21-71: RNCC: 3 | RNVC: 2
542 20 21-71: RNCC: 5 | RNVC: 2
CV203167: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-1699
Mounting Bracket

016301699
542 20 21-64: RNCC: 3 | RNVC: 2
CV203163: RNCC: 5 | RNVC: 2
542 20 21-64: RNCC: 5 | RNVC: 2

28 Jul 2014

5340-01-630-0661
Angle Bracket

016300661
4164940: RNCC: 3 | RNVC: 2
4164940: RNCC: 3 | RNVC: 9

24 Jul 2014

5340-01-629-6113
Mounting Bracket

016296113
001-001981-000: RNCC: 3 | RNVC: 2

9 Jul 2014

5340-01-629-7876
Buckle

016297876
FC50MVV-XB: RNCC: 3 | RNVC: 2

15 Jul 2014

5340-01-629-7674
Mounting Bracket

016297674
93736: RNCC: 3 | RNVC: 2

14 Jul 2014

5340-01-629-3765
Mounting Plate

016293765
06A8174016: RNCC: 3 | RNVC: 2

27 Jun 2014

5340-01-629-1088
Lap Fixture Guide

18 Jun 2014

5340-01-628-9540
Dust And Moisture Seal Protective Cover

016289540
240GP: RNCC: 3 | RNVC: 2
3953-5: RNCC: 7 | RNVC: 2

16 Jun 2014

5340-01-628-7397
Double Angle Bracket

016287397
06A8124026: RNCC: 3 | RNVC: 2

9 Jun 2014

5340-01-628-7158
Friction Catch Stud Receptacle

016287158
A1663-031-1A: RNCC: 3 | RNVC: 2
GS510A031-1A: RNCC: 5 | RNVC: 2

6 Jun 2014

5340-01-628-5213
Loop Clamp

29 May 2014

5340-01-628-6255
Clamp Bolt Assembly

016286255
06A8165061: RNCC: 3 | RNVC: 2

4 Jun 2014

5340-01-628-5482
Angle Bracket

016285482
09026B6001: RNCC: 3 | RNVC: 2

30 May 2014

5340-01-627-9632
Mounting Bracket

016279632
03-1-17-210-0FL: RNCC: 3 | RNVC: 2

5 May 2014

5340-01-627-7838
Parts Kit

016277838
AV 210620 ITEM 90 & 91: RNCC: 3 | RNVC: 1
AV 210620 ITEM 90 & 91L1: RNCC: 5 | RNVC: 2

28 Apr 2014

5340-01-627-3776
Mounting Plate

016273776
12521441: RNCC: 3 | RNVC: 2

11 Apr 2014

5340-01-626-9972
Clamping Catch

016269972
68A313640-1001: RNCC: 3 | RNVC: 2

27 Mar 2014

5340-01-626-9485
Assembled Nut Retainer

016269485
2688170: RNCC: 3 | RNVC: 2

26 Mar 2014

5340-01-626-8725
Mounting Bracket

016268725
LS1082808: RNCC: 3 | RNVC: 2

24 Mar 2014

5340-01-626-8029
Mounting Bracket

016268029
74A324552-2007: RNCC: 3 | RNVC: 2

20 Mar 2014

5340-01-626-7866
Spring Holder

016267866
14002861: RNCC: 3 | RNVC: 2

20 Mar 2014

5340-01-626-3292
Dust And Moisture Seal Protective Cap

016263292
62TNC-0-0-1/33-E: RNCC: 3 | RNVC: 9

6 Mar 2014

5340-01-626-2615
Angle Bracket

016262615
25-5038D: RNCC: 3 | RNVC: 2

4 Mar 2014

5340-01-626-0749
Mounting Bracket

016260749
A1-38767D-002: RNCC: 3 | RNVC: 2

26 Feb 2014

5340-01-626-0106
Mounting Bracket

016260106
T16275: RNCC: 3 | RNVC: 2

24 Feb 2014

5340-01-626-1181
Manual Control Lever

016261181
109821-11: RNCC: 3 | RNVC: 2

26 Feb 2014

5340-01-625-8324
Mounting Bracket

016258324
1045817-101: RNCC: 3 | RNVC: 2

18 Feb 2014

5340-01-625-6696
Mounting Bracket

016256696
004551-001: RNCC: 3 | RNVC: 2

11 Feb 2014

5340-01-625-4101
Dust And Moisture Seal Protective Plug

016254101
121P2100: RNCC: 3 | RNVC: 2

4 Feb 2014

5340-01-625-1849
Mounting Plate

016251849
11582704: RNCC: 3 | RNVC: 2

28 Jan 2014

5340-01-625-2182
Manual Control Lever

016252182
109821-12: RNCC: 3 | RNVC: 2

28 Jan 2014

5340-01-625-1544
Mechanic Equipment Hardware Kit

27 Jan 2014

5340-01-625-0884
Dust And Moisture Seal Protective Cap Set

016250884
AN929A8W: RNCC: 2 | RNVC: 2

24 Jan 2014

5340-01-624-8801
Manual Control Handle

016248801
1C3027-1: RNCC: 3 | RNVC: 2

17 Jan 2014

5340-01-624-8481
Rod Retainer Clip

016248481
SL122: RNCC: 3 | RNVC: 2

16 Jan 2014

5340-01-624-6082
Combination Lock

016246082
C-82807-6: RNCC: 3 | RNVC: 2
C-82807: RNCC: D | RNVC: 9

9 Jan 2014

5340-01-624-4726
Spring Tension Clip

016244726
69-38947-13: RNCC: 3 | RNVC: 2

3 Jan 2014

5340-01-624-3839
Mounting Bracket

016243839
11B5021002: RNCC: 3 | RNVC: 2

30 Dec 2013

5340-01-624-3010
Leather Strap

016243010
204-30790-13: RNCC: 3 | RNVC: 2

23 Dec 2013

5340-01-624-1939
Mounting Bracket

016241939
54220335: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-01-624-2019
Lock-Release Lever

016242019
6148A25: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-01-624-1877
Retaining Clip

016241877
14120-00: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-01-624-1762
Catch Strike

016241762
204-40213-3: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-01-624-1054
Latch Bar

016241054
803-5001003-X3X1-166: RNCC: 3 | RNVC: 2

16 Dec 2013

5340-01-623-8565
Detent Plunger

016238565
11582681: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-01-623-8656
Mounting Plate

016238656
11582704X: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-01-623-8567
Manual Control Lever

016238567
11582701X: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-01-623-7567
Detent Plunger

016237567
11582688X: RNCC: 3 | RNVC: 2

29 Nov 2013

5340-01-623-7573
Detent Plunger

016237573
11582690X: RNCC: 3 | RNVC: 2

29 Nov 2013

5340-01-623-7424
Detent Plunger

016237424
11582689X: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-01-623-6593
Retaining Clip

016236593
9802-23343-012: RNCC: 3 | RNVC: 2

25 Nov 2013

5340-01-623-6592
Retaining Clip

016236592
9802-23343-014: RNCC: 3 | RNVC: 2

25 Nov 2013

5340-01-623-6576
Mounting Plate

016236576
9802-23343-001: RNCC: 3 | RNVC: 2

25 Nov 2013

5340-01-623-6573
Mounting Bracket

016236573
9802-23144-003: RNCC: 3 | RNVC: 2

25 Nov 2013

5340-01-623-3668
Angle Bracket

016233668
06-126781-001: RNCC: 3 | RNVC: 2

8 Nov 2013

5340-01-623-2933
General Purpose Resilient Mount

016232933
25122P1: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-01-623-0076
Retaining Strap

016230076
LS10682C40T: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-01-622-9558
Block Clamp

016229558
709 1587: RNCC: 3 | RNVC: 2
709 1587: RNCC: 5 | RNVC: 2
709 1587: RNCC: 5 | RNVC: 2
39.00002: RNCC: 5 | RNVC: 9

25 Oct 2013

5340-01-622-7453
Handle Grip

016227453
114S4904-127: RNCC: 3 | RNVC: 2

22 Oct 2013

5340-01-622-7450
Access Door Hinge

016227450
114S4803-8: RNCC: 3 | RNVC: 2

22 Oct 2013

5340-01-622-6713
Access Door Hinge

016226713
114S4803-6: RNCC: 3 | RNVC: 2

17 Oct 2013

5340-01-622-6711
Access Door Hinge

016226711
114S4803-5: RNCC: 3 | RNVC: 2

17 Oct 2013

5340-01-622-6715
Access Door Hinge

016226715
114S4803-7: RNCC: 3 | RNVC: 2

17 Oct 2013

5340-01-622-6115
Retaining Strap

016226115
572-02530-75: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-01-622-6058
Retaining Strap

016226058
572-02530-56: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-01-622-6050
Retaining Strap

016226050
572-02530-55: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-01-622-6049
Retaining Strap

016226049
572-02530-76: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-01-622-1330
Mounting Bracket

016221330
164-301530-00: RNCC: 3 | RNVC: 2

27 Sep 2013

5340-01-622-0971
Nut And Bolt Retainer

016220971
657690: RNCC: 3 | RNVC: 2

27 Sep 2013

5340-01-622-0671
Crank Handle

016220671
4013704: RNCC: 3 | RNVC: 2
4013704: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-01-621-7826
Detent Plunger

016217826
11582683X: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-01-621-7815
Manual Control Lever

016217815
11582684X: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-01-621-7797
Mending Plate

016217797
11582698X: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-01-621-7667
Buckle

016217667
173S1634-5: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-01-621-7244
Access Cover

016217244
414S2650-14: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-01-621-4671
Mill Leveling Pad

016214671
11B5121007: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-01-621-4014
Spacing Threaded Standoff

016214014
91075A176: RNCC: 3 | RNVC: 2
91075A785: RNCC: 5 | RNVC: 1
802027297030-1: RNCC: 7 | RNVC: 2

5 Sep 2013

5340-01-621-3665
Dust And Moisture Seal Protective Cap

016213665
PWR211: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-01-621-3617
Access Cover

016213617
101534-139: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-01-621-3303
Access Cover

016213303
09003G0412: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-01-621-3013
Mounting Bracket

30 Aug 2013

5340-01-621-2710
Filler Opening Cap

016212710
1615 6947 01: RNCC: 3 | RNVC: 2
1615 6947 01: RNCC: 5 | RNVC: 9

29 Aug 2013

5340-01-621-1674
General Purpose Access Door

016211674
12517542: RNCC: 1 | RNVC: 2
1005494: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-01-621-1007
Mounting Bracket

016211007
A3B-1569: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-01-621-0189
Belt-Strap Keeper

016210189
145G0051-32: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-01-621-0144
Rim Latch Set

016210144
145G0051-31: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-01-620-8550
Block Clamp

016208550
270N2000-196: RNCC: 3 | RNVC: 2

14 Aug 2013

5340-01-620-5843
Door Handle

016205843
17-3-3717-2: RNCC: 3 | RNVC: 2
17-3-3717: RNCC: D | RNVC: 9

31 Jul 2013

5340-01-620-4898
Nut And Bolt Retainer

016204898
210331: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-01-620-4596
Name Plate

016204596
30-15962-9: RNCC: 3 | RNVC: 1

24 Jul 2013

5340-01-620-3692
Access Cover

016203692
P780533: RNCC: 3 | RNVC: 2
P780533: RNCC: 3 | RNVC: 9
7100425: RNCC: 5 | RNVC: 2

19 Jul 2013

5340-01-620-1169
Mounting Plate

016201169
715970-3: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-01-620-0981
Angle Bracket

016200981
06A8199999: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-01-620-0982
Angle Bracket

016200982
06A8199998: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-01-619-5767
Mounting Bracket

016195767
512471: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-01-619-6185
Lock Key

016196185
7628644-002: RNCC: 3 | RNVC: 2
7628644: RNCC: D | RNVC: 9

10 Jun 2013

5340-01-619-5940
Mounting Bracket

016195940
1607060-101: RNCC: 3 | RNVC: 2

7 Jun 2013

5340-01-619-5938
Retaining Clip

016195938
1519297-101: RNCC: 3 | RNVC: 2

7 Jun 2013

5340-01-619-5897
Handwheel

016195897
12142-655: RNCC: 3 | RNVC: 2
12142-655: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5910
Handle Cover

016195910
KV173-1: RNCC: 3 | RNVC: 2

7 Jun 2013

5340-01-619-5877
Handwheel

016195877
12142-329: RNCC: 3 | RNVC: 2
12142-329: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5880
Handwheel

016195880
12142-355: RNCC: 3 | RNVC: 2
12142-355: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5899
Handwheel

016195899
12142-621: RNCC: 3 | RNVC: 2
12142-621: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5892
Handwheel

016195892
12142-337: RNCC: 3 | RNVC: 2
12142-337: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5891
Handwheel

016195891
12142-321: RNCC: 3 | RNVC: 2
12142-321: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-01-619-5052
Access Cover

016195052
10651066-001PEG: RNCC: 3 | RNVC: 2
10651066: RNCC: D | RNVC: 9

4 Jun 2013

5340-01-619-4614
Cover

016194614
13400-010: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-01-619-4455
Mechanic Equipment Hardware Kit

016194455
A3184226: RNCC: 3 | RNVC: 2

31 May 2013

5340-01-619-4254
Dust And Moisture Seal Protective Cover

016194254
11470400-001: RNCC: 3 | RNVC: 2
11470400-1: RNCC: 3 | RNVC: 2

30 May 2013

5340-01-619-2608
Angle Bracket

016192608
J42730-023: RNCC: 3 | RNVC: 2
6062234ITEM86: RNCC: 5 | RNVC: 2
6062594ITEM1: RNCC: 5 | RNVC: 2

22 May 2013

5340-01-619-2592
Angle Bracket

016192592
J42730-024: RNCC: 3 | RNVC: 2
6062234ITEM87: RNCC: 5 | RNVC: 2
6062594ITEM2: RNCC: 5 | RNVC: 2

22 May 2013

5340-01-619-1900
Padlock

016191900
MODEL 826A: RNCC: 3 | RNVC: 2
437-7384474 FN AY-1-11: RNCC: 5 | RNVC: 1
B673-9145 FN AY-1-11: RNCC: 5 | RNVC: 1

21 May 2013

5340-01-618-8423
Mounting Bracket

016188423
1530237-107: RNCC: 3 | RNVC: 2

8 May 2013

5340-01-618-7411
Swivel Caster

016187411
SC-215: RNCC: 3 | RNVC: 2

3 May 2013

5340-01-618-4442
Seal Retaining Plate

016184442
131358: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-01-618-4416
Clamp Bolt Assembly

016184416
TB-400: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-01-618-4393
Manual Control Handle

016184393
4877 ZN PDLK: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-01-618-4413
Nut And Bolt Head Protective Cap

016184413
60034600: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-01-618-4362
Electrical Receptacle Connector

016184362
AVMPS122: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-01-618-2387
Mounting Bracket

016182387
1564558-103: RNCC: 3 | RNVC: 2
MT8-07-0333/1: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-01-618-1783
Access Cover

016181783
BACP19E3S: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-01-618-1797
Plastic Filler Block

016181797
69-14519-10: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-01-617-9735
Access Cover

016179735
202970-01: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9612
Locking Stay

016179612
F0041: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9574
Manual Control Handle

016179574
S0049: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9584
Pipe Hanger

016179584
F0042: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9576
Nonmetallic Solid Wheel

016179576
F0021: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9569
Loop Clamp

016179569
F0002: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9562
Lock Bar

016179562
S0053: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-9525
Dust And Moisture Seal Protective Cap-Plug

016179525
F0016: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-01-617-8479
Pnp Box Nrp

016178479
7648551-2: RNCC: 3 | RNVC: 2
7648551-3: RNCC: 3 | RNVC: 2

5 Apr 2013

5340-01-617-7337
Multiple Angle Bracket

016177337
A3325736: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-01-617-6616
Spring Tension Clip

016176616
PMLN4652: RNCC: 3 | RNVC: 2

29 Mar 2013

5340-01-617-5842
Block Clamp

016175842
7-611A21704-001: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-01-617-4870
Extension Drawer Slide

016174870
ICD-84070-1019: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-01-617-4876
Mounting Bracket

016174876
13288589: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-01-617-4319
Mounting Bracket

016174319
209-064-854-187: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-01-617-2804
Mounting Bracket

016172804
43011996: RNCC: 3 | RNVC: 2

19 Mar 2013

5340-01-617-3711
Mounting Bracket

016173711
2100100-101: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-01-617-3659
Angle Bracket

016173659
MS9230-09: RNCC: 3 | RNVC: 2
MS9230-09: RNCC: 5 | RNVC: 9

20 Mar 2013

5340-01-617-3323
Manual Control Lever

016173323
A040N072: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-01-617-1985
Mounting Bracket

14 Mar 2013

5340-01-616-9354
Dust And Moisture Seal Protective Cover

016169354
1612903-101: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-01-616-9307
Loop Clamp

016169307
LS10682D64S: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-01-616-9186
Retaining Clip

016169186
66-5386-1: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-01-616-9172
Retaining Clip

016169172
12-0195-13: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-01-616-9116
Mounting Bracket

016169116
7-511A21633-43: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-01-616-8978
Butt Hinge

016168978
1569062-107: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-01-616-8613
Butt Hinge Leaf

016168613
1514858-109: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-01-616-8455
Catch Strike

016168455
1505708-103: RNCC: 3 | RNVC: 2
1505708-106: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-01-616-8288
Mounting Plate

016168288
43012587-2: RNCC: 3 | RNVC: 2
43012587: RNCC: D | RNVC: 9

28 Feb 2013

5340-01-616-7853
Hand Carrying Strap Assembly

016167853
1558589-103: RNCC: 3 | RNVC: 2
MT8-07-0240/103: RNCC: 5 | RNVC: 2

27 Feb 2013

5340-01-616-7854
Retaining Strap

016167854
1558589-117: RNCC: 3 | RNVC: 2
MT8-07-0240/117: RNCC: 5 | RNVC: 2

27 Feb 2013

5340-01-616-4455
Radar Target Mount

016164455
00157: RNCC: 3 | RNVC: 2
157: RNCC: 5 | RNVC: 2

14 Feb 2013

5340-01-616-3951
Webbing Strap

016163951
800563: RNCC: 1 | RNVC: 2
304488: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-01-616-3921
Rod End Clevis

016163921
43019551: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-01-616-3531
Mounting Plate

016163531
800748: RNCC: 1 | RNVC: 2
308530: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-01-616-2484
Access Cover

6 Feb 2013

5340-01-616-2315
Access Cover

016162315
1550284-103: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-01-616-2130
Mounting Plate

016162130
3221835: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-01-616-1844
Expansion Plug

016161844
MS35648-244: RNCC: 2 | RNVC: 2

5 Feb 2013

5340-01-616-1742
Loop Clamp

016161742
LS14968D12AS: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-01-616-1368
Block Clamp

016161368
1550622-101: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-01-616-0617
Antipilferage(Self Locking) Seal

016160617
USFORA 5340-00-081-3381: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-01-616-1090
Block Clamp

016161090
1624696-105: RNCC: 3 | RNVC: 2

1 Feb 2013

5340-01-616-0766
Synchro Clamp

016160766
1620725-101: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-01-616-0532
Mounting Bracket

016160532
LSV0020-02: RNCC: 3 | RNVC: 2
43019789: RNCC: 7 | RNVC: 2

30 Jan 2013

5340-01-616-0544
Dust And Moisture Seal Protective Plug

016160544
EC2904-4: RNCC: 2 | RNVC: 2

30 Jan 2013

5340-01-616-0522
Lsv Outer Seat Frame Spacer

016160522
LSV0045: RNCC: 3 | RNVC: 2
43019697: RNCC: 7 | RNVC: 2

30 Jan 2013

5340-01-616-0513
Mounting Bracket

016160513
LSV0020-01: RNCC: 3 | RNVC: 2
43019689: RNCC: 7 | RNVC: 2

30 Jan 2013

5340-01-616-0304
Mounting Bracket

016160304
43018310: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-01-616-0284
Mounting Bracket

016160284
43019181-05: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-01-615-9818
Mounting Bracket

016159818
43019742: RNCC: 3 | RNVC: 2

29 Jan 2013

5340-01-615-9581
Access Cover

016159581
45343-010: RNCC: 3 | RNVC: 2
4-1616331-8: RNCC: 5 | RNVC: 2
4-1616331-8: RNCC: 5 | RNVC: 9

28 Jan 2013

5340-01-615-9475
Dust And Moisture Seal Protective Plug

016159475
BACP20B21: RNCC: 3 | RNVC: 2

28 Jan 2013

5340-01-615-9477
Dust And Moisture Seal Protective Plug

016159477
BACP20AR8: RNCC: 3 | RNVC: 2

28 Jan 2013

5340-01-615-9087
Padlock

016159087
USFORA 5340-01-346-7462: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9124
Butt Hinge

016159124
USFORA 5340-00-664-1326: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9123
Hinged Hasp

016159123
USFORA 5340-00-664-1707: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9075
Door Closer

016159075
USFORA 5340-00-116-2375: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9083
Padlock

016159083
USFORA 5340-01-346-4611: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9082
Padlock

016159082
USFORA 5340-00-292-0896: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-9077
Door Closer

016159077
USFORA 5340-00-116-2376: RNCC: 3 | RNVC: 2

27 Jan 2013

5340-01-615-8768
Mounting Plate

25 Jan 2013

5340-01-615-8410
Headless Straight Rod

016158410
6-63233-2001: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-01-615-8411
Mounting Bracket

016158411
13036410: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-01-615-8283
Crank Handle

016158283
452006: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-01-615-8089
General Purpose Resilient Mount

24 Jan 2013

5340-01-615-7906
Access Cover

23 Jan 2013

5340-01-615-7797
Mounting Plate

23 Jan 2013

5340-01-615-6828
General Purpose Access Door

18 Jan 2013

5340-01-615-6829
General Purpose Access Door

18 Jan 2013

5340-01-615-6775
Retaining Strap

18 Jan 2013

5340-01-615-6760
Access Cover

18 Jan 2013

5340-01-615-6585
Mounting Bracket

016156585
LSV0065-02: RNCC: 3 | RNVC: 2
43019791: RNCC: 7 | RNVC: 2

18 Jan 2013

5340-01-615-6566
Dust And Moisture Seal Protective Cover

016156566
FPT9438: RNCC: 3 | RNVC: 2

18 Jan 2013

5340-01-615-6518
Mounting Bracket

016156518
LSV0037-02: RNCC: 3 | RNVC: 2
43019790: RNCC: 7 | RNVC: 2

18 Jan 2013

5340-01-615-6473
Mounting Bracket

016156473
LSV0065-01: RNCC: 3 | RNVC: 2
43019706: RNCC: 7 | RNVC: 2

18 Jan 2013

5340-01-615-6153
Mounting Bracket

016156153
LSV0037-01: RNCC: 3 | RNVC: 2
43019692: RNCC: 7 | RNVC: 2

17 Jan 2013

5340-01-615-6188
Mounting Plate

016156188
A3301549: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-01-615-6261
Mounting Bracket

016156261
RO 2523HP-65: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-01-615-6105
Access Cover

17 Jan 2013

5340-01-615-6099
General Purpose Resilient Mount

17 Jan 2013

5340-01-615-6093
Rfi Dust Cap

016156093
RT502000: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-01-615-5850
Block Clamp

016155850
1624696-103: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5845
Friction Catch Stud

016155845
1602893-103: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5829
Retaining Clip

016155829
1628201-105: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5742
Headless Straight Rod

016155742
90-3213-3006: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5768
Escutcheon Plate

016155768
1531157-103: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5745
Headless Straight Rod

016155745
90-2377-2007: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-01-615-5164
Swivel Caster

016155164
81MR08501SL-SB: RNCC: 3 | RNVC: 2

15 Jan 2013

5340-01-615-4081
Mounting Bracket

016154081
136953: RNCC: 3 | RNVC: 2

10 Jan 2013

5340-01-615-3956
Threaded Rod End

016153956
AN490HT16P: RNCC: 3 | RNVC: 2

10 Jan 2013

5340-01-615-3121
Dust And Moisture Seal Protective Plug

016153121
3460-153-3: RNCC: 3 | RNVC: 2
304-2: RNCC: 5 | RNVC: 9

8 Jan 2013

5340-01-615-2602
Headless Straight Rod

016152602
69-71328-2: RNCC: 3 | RNVC: 2

7 Jan 2013

5340-01-615-0906
Angle Bracket

27 Dec 2012

5340-01-615-0738
Speci Webbing Strap

016150738
050-01909-0003: RNCC: 3 | RNVC: 2

27 Dec 2012

5340-01-614-9498
Mounting Bracket

016149498
41252-1: RNCC: 3 | RNVC: 2
41252: RNCC: D | RNVC: 9

19 Dec 2012

5340-01-614-9396
Mounting Plate

016149396
BS-2000-010-903: RNCC: 3 | RNVC: 2
BS-2000-010-903D: RNCC: D | RNVC: 9

19 Dec 2012

5340-01-614-8618
Mounting Plate

016148618
305-587-101-0: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-01-614-8888
Mounting Plate

016148888
305-744-201-6: RNCC: 3 | RNVC: 2

18 Dec 2012

5340-01-614-8843
Door Button

016148843
660186-00: RNCC: 3 | RNVC: 2

18 Dec 2012

5340-01-614-8816
Detent Plunger

016148816
660197-02: RNCC: 3 | RNVC: 2

18 Dec 2012

5340-01-614-8616
Stand Base

016148616
305-247-103-0: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-01-614-8609
Rod End Clevis

016148609
305-218-301-0: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-01-614-8575
Safety Cable Kit

17 Dec 2012

5340-01-614-7261
Mounting Bracket

016147261
6D62017-002: RNCC: 3 | RNVC: 2
6D62010ITEM14: RNCC: 5 | RNVC: 2

13 Dec 2012

5340-01-614-6983
Mounting Bracket

016146983
6D62018-001: RNCC: 3 | RNVC: 2
6D62010ITEM16: RNCC: 5 | RNVC: 2

12 Dec 2012

5340-01-614-4649
Instrument Mounting Clamp

016144649
NH1006439-50: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-01-614-4715
Loop Clamp

5 Dec 2012

5340-01-614-4149
Double Angle Bracket

016144149
2685: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-01-614-3268
Access Cover

016143268
48-04512: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-01-614-3420
Flush Catch

016143420
9109-19: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-01-614-2558
Buckle

016142558
1101600-03: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-01-614-2537
Special Clip

016142537
65201-08047-149: RNCC: 3 | RNVC: 2
65201-08047-149: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-01-614-2255
Dust And Moisture Seal Boot

016142255
40141: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-01-614-2103
Handle

016142103
65-1750-11: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-01-614-2102
Handle

016142102
65-1750-13: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-01-614-1559
Dust And Moisture Seal Protective Cap

016141559
66-7182: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-01-614-1160
Blank Panel

016141160
BACP10U1162B: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-01-614-0396
Access Cover

016140396
463569-2: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-01-613-9703
Retaining Band

016139703
BACC10Q2-650: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9702
Retaining Band

016139702
BACC10Q25-627: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9700
Retaining Band

016139700
BACC10Q24-627E: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9670
Loop Clamp

016139670
BACC10HC24C: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9669
Loop Clamp

016139669
BACC10FY81S: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9667
Retaining Band

016139667
BACC10Q-B-627: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9654
Retaining Band

016139654
BACC10Q6-1030: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-9643
Retaining Clip

016139643
BACC15AJ3: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-8807
General Purpose Access Door

016138807
204-56734A06: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-8835
Mounting Bracket

016138835
204-53439-29: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-8808
General Purpose Access Door

016138808
204-56931-1: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-01-613-7994
Mounting Plate

016137994
99163: RNCC: 3 | RNVC: 2
845-7526223-1-64: RNCC: 5 | RNVC: 2

19 Nov 2012

5340-01-613-7435
Rod End Clevis

016137435
69-54040-4: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-01-613-7434
Rod End Clevis

016137434
69-54040-1: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-01-613-7420
Mechanical Stop

016137420
69-34514Y3: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-01-613-7416
Butt Hinge Leaf

016137416
69-25613Y2: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-01-613-7401
Butt Hinge Leaf

016137401
69-24755-11: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-01-613-3947
Loop Clamp

016133947
44LC17H6PB: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-01-613-3506
Spring Tension Clip

016133506
3-89026-2001: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-01-613-2886
Tank Assembly

016132886
152525: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-01-613-2647
Spring Tension Clip

016132647
0162622: RNCC: 3 | RNVC: 2
502-19851: RNCC: 5 | RNVC: 9
55001823: RNCC: D | RNVC: 9

5 Nov 2012

Load More Results