What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 25 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 25 of 1045

5340-01-394-2465
Loop Clamp

013942465
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-34N: RNCC: 3 | RNVC: 2
10113304: RNCC: 6 | RNVC: 9

4 Aug 1994

5340-01-249-6561
Loop Clamp

012496561
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D13K: RNCC: 3 | RNVC: 2
10113018: RNCC: 6 | RNVC: 9

14 Feb 1987

5340-01-257-8720
Loop Clamp

012578720
MS21106-3: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

25 Jun 1987

5340-01-263-8739
Loop Clamp

012638739
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT8S: RNCC: 3 | RNVC: 2

20 Sep 1987

5340-01-308-8077
Electrical-Mechanical Equipment Post

013088077
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C13B03: RNCC: 3 | RNVC: 2
109061P1: RNCC: 5 | RNVC: 2
109061P2: RNCC: 5 | RNVC: 2

5 Oct 1989

5340-01-302-8261
Electrical-Mechanical Equipment Post

013028261
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6E24: RNCC: 3 | RNVC: 2
210-1004P18: RNCC: 5 | RNVC: 2
210-1004P18: RNCC: 5 | RNVC: 2
210-1004P18: RNCC: 5 | RNVC: 9
8586-A-1032-2: RNCC: C | RNVC: 1
8469: RNCC: E | RNVC: 8
8469: RNCC: E | RNVC: 8

21 Jun 1989

NSN 5340-01-241-3142 012413142 HANDLE,BOW

5340-01-241-3142
Bow Handle

012413142
NASM39087: RNCC: 3 | RNVC: 1
MS39087-303AN: RNCC: 3 | RNVC: 2
MS39087-303AN: RNCC: 5 | RNVC: 9
MS39087-102AN: RNCC: 5 | RNVC: 9

24 Sep 1986

5340-01-241-3205
Electrical-Mechanical Equipment Post

012413205
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C12: RNCC: 3 | RNVC: 2
582R109H02: RNCC: C | RNVC: 1
1443-M09-F09-4-: RNCC: C | RNVC: 1

24 Sep 1986

5340-01-251-6287
Electrical-Mechanical Equipment Post

012516287
NAS1830: RNCC: 3 | RNVC: 1
NAS1830B01B02: RNCC: 3 | RNVC: 2
26-00020-182: RNCC: C | RNVC: 1
117449-9: RNCC: E | RNVC: 8
350-218-09-07-00: RNCC: E | RNVC: 8
600062P9: RNCC: E | RNVC: 8
350-2188-09-07: RNCC: E | RNVC: 8
2188-9: RNCC: E | RNVC: 8
350-2188-09-07-00: RNCC: E | RNVC: 8

21 Mar 1987

5340-01-234-5682
Electrical-Mechanical Equipment Post

012345682
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B18: RNCC: 3 | RNVC: 2
SM-B-988530-4: RNCC: 7 | RNVC: 2
268-22110-4: RNCC: E | RNVC: 8
8113SS0440-7: RNCC: E | RNVC: 8
268-22110-4: RNCC: E | RNVC: 8

16 Jun 1986

5340-01-702-8210
Dust And Moisture Seal Protective Cap

017028210
8827681: RNCC: 3 | RNVC: 2
8827681 REV -: RNCC: D | RNVC: 9

30 Jul 2022

5340-01-243-9637
Butt Hinge Leaf

012439637
MS20001PX5-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

5 Nov 1986

5340-01-244-1596
Antipilferage Seal

012441596
POLYLOCK-BLUE: RNCC: 3 | RNVC: 1
M4836-BLUE: RNCC: 3 | RNVC: 2
4001-BLUE: RNCC: 5 | RNVC: 2
5340PL1046443: RNCC: 6 | RNVC: 9
POLY-LOK BLUE: RNCC: E | RNVC: 8

7 Nov 1986

5340-01-305-4451
Loop Clamp

013054451
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D13: RNCC: 3 | RNVC: 2
AN735D13: RNCC: 5 | RNVC: 9

5 Aug 1989

5340-01-283-6622
Loop Clamp

012836622
M85052/2-6: RNCC: 2 | RNVC: 2
MIL-DTL-85052/2: RNCC: 4 | RNVC: 1
M85052/2-6: RNCC: 5 | RNVC: 2
M85052/2-6: RNCC: 5 | RNVC: 2
TA026000106EP: RNCC: 5 | RNVC: 2
TA026-0001-06EP: RNCC: 5 | RNVC: 9

10 Aug 1988

5340-01-284-2617
Bow Handle

012842617
NASM39087: RNCC: 3 | RNVC: 1
MS39087-404CP: RNCC: 3 | RNVC: 2
SV792683FIND68: RNCC: 5 | RNVC: 1
MS39087-404CP: RNCC: 5 | RNVC: 9
MS39087-202CP: RNCC: 5 | RNVC: 9

20 Aug 1988

5340-01-286-0941
Butt Hinge

012860941
AA55594-16D: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-16D: RNCC: 5 | RNVC: 9
AA55594-16D: RNCC: 5 | RNVC: 9

26 Sep 1988

5340-01-299-2819
Electrical-Mechanical Equipment Post

012992819
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E10: RNCC: 3 | RNVC: 2

30 Apr 1989

5340-01-703-3965
Dust And Moisture Seal Protective Cap

017033965
RF5003C-D: RNCC: 3 | RNVC: 2

3 Sep 2022

5340-01-210-1861
Electrical-Mechanical Equipment Post

012101861
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B11: RNCC: 3 | RNVC: 2

7 Jun 1985

5340-01-217-2264
Loop Clamp

012172264
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-10N: RNCC: 3 | RNVC: 2
10112982: RNCC: 6 | RNVC: 9

23 Sep 1985

5340-01-222-8756
Electrical-Mechanical Equipment Post

012228756
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C03: RNCC: 3 | RNVC: 2
10129634: RNCC: 6 | RNVC: 9

19 Dec 1985

5340-01-220-7982
Angle Bracket

012207982
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-147: RNCC: 3 | RNVC: 2
MS9592-147: RNCC: 3 | RNVC: 9
MS9592-147: RNCC: 5 | RNVC: 9
AS9592: RNCC: D | RNVC: 9

19 Nov 1985

5340-01-210-8703
Electrical-Mechanical Equipment Post

012108703
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4G08: RNCC: 3 | RNVC: 2
4534-832-SS-0: RNCC: 5 | RNVC: 2
721617-326: RNCC: C | RNVC: 1
9739SS0832-7: RNCC: C | RNVC: 1

18 Jun 1985

5340-01-223-7948
Electrical-Mechanical Equipment Post

012237948
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C08: RNCC: 3 | RNVC: 2
H50-0003-001: RNCC: 5 | RNVC: 2
SC5340-0204-17: RNCC: 7 | RNVC: 9
NAS1829CHC08: RNCC: C | RNVC: 1
NAS1829-4C08: RNCC: C | RNVC: 1
9739SS0440-7: RNCC: E | RNVC: 8
600055P143: RNCC: E | RNVC: 8

6 Jan 1986

5340-01-211-1635
Electrical-Mechanical Equipment Post

012111635
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4B12: RNCC: 3 | RNVC: 2

21 Jun 1985

5340-01-217-5398
Dust And Moisture Seal Protective Cap

012175398
NAS841: RNCC: 3 | RNVC: 1
NAS841-6: RNCC: 3 | RNVC: 2
989663: RNCC: 5 | RNVC: 2
M5501/14-6G: RNCC: 5 | RNVC: 9
MIL-C-5501/14: RNCC: 5 | RNVC: 9

28 Sep 1985

5340-01-212-1292
Loop Clamp

012121292
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCH34: RNCC: 3 | RNVC: 2
MS21919WCH34: RNCC: 5 | RNVC: 9
AS21919WCH34: RNCC: 5 | RNVC: 9

6 Jul 1985

5340-01-260-9935
Antipilferage Seal

012609935
8904000S: RNCC: 3 | RNVC: 2
8904000S: RNCC: 3 | RNVC: 2
8904000: RNCC: 5 | RNVC: 2
8904000L: RNCC: 5 | RNVC: 2
8904000S: RNCC: 5 | RNVC: 9
89040: RNCC: 5 | RNVC: 9

7 Aug 1987

5340-01-265-4864
Webbing Strap

012654864
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10J13: RNCC: 3 | RNVC: 2

14 Oct 1987

5340-01-293-7919
Electrical-Mechanical Equipment Post

012937919
8236-SS-0632: RNCC: 3 | RNVC: 2
8236-SS-0632-0: RNCC: 5 | RNVC: 2
8236-SS-0632-7: RNCC: 5 | RNVC: 2
1130H-SS-2.375-12: RNCC: 5 | RNVC: 2
2131-632-SS-20: RNCC: 5 | RNVC: 2
130-34-SS-6-32-E: RNCC: 5 | RNVC: 2
SS-4033-632-12: RNCC: 5 | RNVC: 2
P-649-M09-F09-632: RNCC: 5 | RNVC: 2
SS-6951-0632-2.375-01: RNCC: 5 | RNVC: 2
8236-SS-0632: RNCC: 5 | RNVC: 9

6 Feb 1989

5340-01-273-6390
Butt Hinge

012736390
AA50432 TYVII, CLIII 3X3 1.5: RNCC: 2 | RNVC: 2
A-A-50432: RNCC: 4 | RNVC: 1
A-A-50432-7: RNCC: 5 | RNVC: 9
MIL-H-1237 TY-7 3.000 X 3.000: RNCC: 5 | RNVC: 9
AA50432 TYVII, CLIII 3X3: RNCC: 5 | RNVC: 9

28 Feb 1988

5340-01-271-5214
Loop Clamp

012715214
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT16K: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-01-298-7671
Electrical-Mechanical Equipment Post

012987671
NAS1830: RNCC: 3 | RNVC: 1
NAS1830B13B04: RNCC: 3 | RNVC: 2

22 Apr 1989

5340-00-188-0281
Turnbuckle

001880281
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 5/16X4-1/2: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-188-0288
Turnbuckle

001880288
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 5/8X12: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-216-1603
Butt Hinge

012161603
MS20001-5-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
5340PL0858790: RNCC: 6 | RNVC: 9

6 Sep 1985

5340-01-209-7484
Loop Clamp

012097484
NAS1714: RNCC: 3 | RNVC: 1
NAS1714DT2-6K: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-01-244-1975
Electrical-Mechanical Equipment Post

012441975
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6G12: RNCC: 3 | RNVC: 2

8 Nov 1986

5340-01-243-4497
Electrical-Mechanical Equipment Post

012434497
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D32: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-01-223-7956
Electrical-Mechanical Equipment Post

012237956
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C26: RNCC: 3 | RNVC: 2

6 Jan 1986

5340-01-223-7939
Electrical-Mechanical Equipment Post

012237939
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6E06: RNCC: 3 | RNVC: 2
9753SS0632-7: RNCC: C | RNVC: 1

6 Jan 1986

5340-01-250-4673
Loop Clamp

012504673
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D30T: RNCC: 3 | RNVC: 2

1 Mar 1987

5340-01-247-0649
Bow Handle

012470649
NASM39087: RNCC: 3 | RNVC: 1
MS39087-205AN: RNCC: 3 | RNVC: 2
MS39087-205AN: RNCC: 5 | RNVC: 9

23 Dec 1986

5340-01-256-3209
Spring Tension Clip

012563209
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-016-05C: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-01-233-2986
Angle Bracket

012332986
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-052: RNCC: 3 | RNVC: 2
MS9593-052: RNCC: 3 | RNVC: 9
MS9593-052: RNCC: 5 | RNVC: 9

29 May 1986

5340-01-241-1723
Retaining Strap

012411723
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-47S: RNCC: 3 | RNVC: 2

23 Sep 1986

5340-01-242-0583
Antipilferage Seal

012420583
PTS: RNCC: 3 | RNVC: 2
6630500-6: RNCC: 5 | RNVC: 2
01387: RNCC: 5 | RNVC: 2
322S13031: RNCC: 5 | RNVC: 2
25940: RNCC: 5 | RNVC: 2
25940N: RNCC: 5 | RNVC: 9
06902 REV H ITEM 6: RNCC: 5 | RNVC: 9
HLS-4425: RNCC: 5 | RNVC: 9
FE-3Y: RNCC: 5 | RNVC: 9
1387: RNCC: 5 | RNVC: 9

6 Oct 1986

5340-01-242-6209
Electrical-Mechanical Equipment Post

012426209
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6G08: RNCC: 3 | RNVC: 2

14 Oct 1986

5340-01-249-8683
Loop Clamp

012498683
900729-23: RNCC: 3 | RNVC: 2
900729-23: RNCC: 5 | RNVC: 1
BM080058: RNCC: 5 | RNVC: 2
BM130019: RNCC: 5 | RNVC: 9

19 Feb 1987

5340-01-211-3599
Electrical-Mechanical Equipment Post

012113599
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B10: RNCC: 3 | RNVC: 2
10129636: RNCC: 6 | RNVC: 9

26 Jun 1985

5340-01-209-2929
Retaining Strap

012092929
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C13-7S: RNCC: 3 | RNVC: 2

27 May 1985

5340-01-203-3435
Spacing Threaded Standoff

012033435
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C07: RNCC: 3 | RNVC: 2
1245393: RNCC: C | RNVC: 1
5482995: RNCC: C | RNVC: 1
5482995: RNCC: E | RNVC: 8

14 Mar 1985

5340-01-204-4969
Electrical-Mechanical Equipment Post

012044969
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B08: RNCC: 3 | RNVC: 2
NAS1786A04-8: RNCC: 5 | RNVC: 9

27 Mar 1985

5340-01-229-0111
Electrical-Mechanical Equipment Post

012290111
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B3B16: RNCC: 3 | RNVC: 2

24 Mar 1986

5340-01-207-6909
Spacing Threaded Standoff

012076909
408-153819: RNCC: 3 | RNVC: 2
408-153819: RNCC: 3 | RNVC: 9
408-153819: RNCC: 5 | RNVC: 2
408-153819: RNCC: 5 | RNVC: 2
408-153819: RNCC: 5 | RNVC: 2
922090: RNCC: 5 | RNVC: 2
408-153819: RNCC: 5 | RNVC: 9
0030009067-001: RNCC: 5 | RNVC: 9
408-15277-5: RNCC: 5 | RNVC: 9
408-15277-6: RNCC: 5 | RNVC: 9

4 May 1985

5340-01-219-9223
Loop Clamp

012199223
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C2K: RNCC: 3 | RNVC: 2
90589: RNCC: 5 | RNVC: 2

5 Nov 1985

5340-01-568-2587
Retaining Clip

015682587
M-2 SADDLE CLIP: RNCC: 3 | RNVC: 2
1600267-23: RNCC: 5 | RNVC: 2
1600267-23: RNCC: 5 | RNVC: 9

24 Oct 2008

5340-01-313-1491
Butt Hinge Leaf

013131491
MS20001PX4-1984: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

3 Jan 1990

5340-00-088-7768
Loop Clamp

000887768
MS25281R12: RNCC: 2 | RNVC: 2
NMC-CL141N-12: RNCC: 5 | RNVC: 1
SAE-AS25281: RNCC: 5 | RNVC: 1
9M843-12: RNCC: 5 | RNVC: 1
MS25281-R12: RNCC: 5 | RNVC: 2
5340000887768: RNCC: 5 | RNVC: 9
433-2021: RNCC: 6 | RNVC: 9
5340000887768: RNCC: 6 | RNVC: 9
MS25281-R12: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-057-1577
Spring Tension Clip

010571577
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-305: RNCC: 3 | RNVC: 2
M24066/2-305: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-105: RNCC: 5 | RNVC: 9

7 Mar 1978

5340-00-186-3420
Loop Clamp

001863420
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D12: RNCC: 3 | RNVC: 2
AS5587D12: RNCC: 3 | RNVC: 9
755-12: RNCC: 5 | RNVC: 2
AN742D12: RNCC: 5 | RNVC: 9
5340PL0727553: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-193-0118
Loop Clamp

001930118
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D64: RNCC: 3 | RNVC: 2
AN735D64: RNCC: 3 | RNVC: 9
AN735D64: RNCC: 5 | RNVC: 1
AN735D64: RNCC: 5 | RNVC: 2
AN735D64: RNCC: 5 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 9
AN735D64: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-126-2540
Nonmetallic Bumper

011262540
400-4674853ITEM1: RNCC: 3 | RNVC: 2
X4085: RNCC: 5 | RNVC: 2
2625-019X12: RNCC: 5 | RNVC: 2
400-46748531ITEM1: RNCC: 5 | RNVC: 9
4674853-0001: RNCC: 5 | RNVC: 9
400-4674831 ITEM 1: RNCC: 5 | RNVC: 9
400-46748531 ITEM 1: RNCC: 5 | RNVC: 9

9 Feb 1982

5340-01-186-4028
Swivel Caster

011864028
AA55619-8SCL: RNCC: 2 | RNVC: 2
A-A-55619-8SCL: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1
MS24380-8SCL: RNCC: 5 | RNVC: 9
F52113-5-5: RNCC: C | RNVC: 1

10 Aug 1984

5340-01-195-0161
Grooved Clamp Coupling

011950161
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-05B: RNCC: 3 | RNVC: 2
AS5355/1-05B: RNCC: 3 | RNVC: 9
AS5355/1: RNCC: 5 | RNVC: 1
AS5355/1: RNCC: 5 | RNVC: 9
AS5355/1-05B: RNCC: 5 | RNVC: 9
MS27114-05B: RNCC: 5 | RNVC: 9
SAE AS5355: RNCC: 5 | RNVC: 9

21 Nov 1984

5340-01-190-7732
Retaining Strap

011907732
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C7-13S: RNCC: 3 | RNVC: 2

1 Oct 1984

5340-01-177-1875
Electrical-Mechanical Equipment Post

011771875
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C12: RNCC: 3 | RNVC: 2
6439-SS-8-12: RNCC: 5 | RNVC: 9
8397-SS-0832-7: RNCC: 5 | RNVC: 9
GS500AD06C012P: RNCC: 5 | RNVC: 9
5165228-7: RNCC: 5 | RNVC: 9
151581-22: RNCC: C | RNVC: 1
R3207P3C48: RNCC: C | RNVC: 1
2680133-110: RNCC: C | RNVC: 1

20 Apr 1984

5340-01-183-8565
Electrical-Mechanical Equipment Post

011838565
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A08: RNCC: 3 | RNVC: 2

11 Jul 1984

5340-01-177-1876
Spacing Threaded Standoff

011771876
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D08: RNCC: 3 | RNVC: 2
NAS1786C08-8: RNCC: 5 | RNVC: 2
8394-SS-0832-7: RNCC: 5 | RNVC: 9
9336C5018-37: RNCC: 5 | RNVC: 9
8394-SS-0832: RNCC: 5 | RNVC: 9
9336C5018-37: RNCC: 5 | RNVC: 9
NAS1831C5008: RNCC: 5 | RNVC: 9
8394-SS-0832: RNCC: C | RNVC: 1
2134842G211: RNCC: C | RNVC: 1

20 Apr 1984

5340-01-171-5919
Angle Bracket

011715919
SAE-AS9594: RNCC: 3 | RNVC: 1
MS9594-254: RNCC: 3 | RNVC: 2
MS9594-254: RNCC: 3 | RNVC: 9
MS9594-254: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-00-064-4307
Spring Tension Clip

000644307
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B062-08C: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-550-8070
Rod End Clevis

005508070
MS35812-6: RNCC: 3 | RNVC: 2
221465: RNCC: 5 | RNVC: 1
50356: RNCC: 5 | RNVC: 1
0033059: RNCC: 5 | RNVC: 1
033059: RNCC: 5 | RNVC: 1
453499: RNCC: 5 | RNVC: 1
221465: RNCC: 5 | RNVC: 9
S17X7: RNCC: 5 | RNVC: 9
2708-6B: RNCC: 5 | RNVC: 9
PC453499: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-727-4778
Dust And Moisture Seal Protective Cap

007274778
NAS832: RNCC: 3 | RNVC: 1
NAS832-12: RNCC: 3 | RNVC: 2
CD12: RNCC: 3 | RNVC: 2
M5501/11-F12: RNCC: 5 | RNVC: 9
MILC5501: RNCC: 5 | RNVC: 9
5340PL0845497: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-185-7897
Dust And Moisture Seal Protective Plug

011857897
NAS847: RNCC: 3 | RNVC: 1
NAS845-13: RNCC: 3 | RNVC: 2
M5501/10-F12: RNCC: 5 | RNVC: 9
MIL-C-5501/10: RNCC: 5 | RNVC: 9

4 Aug 1984

5340-01-170-8841
Dust And Moisture Seal Protective Cap-Plug

011708841
NAS834: RNCC: 3 | RNVC: 1
NAS834-284: RNCC: 3 | RNVC: 2
M5501/7-F50: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501 7-F50: RNCC: C | RNVC: 1

30 Jan 1984

5340-01-194-8555
Grooved Clamp Coupling

011948555
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-03R: RNCC: 3 | RNVC: 2
AS5355/1-03R: RNCC: 3 | RNVC: 9
MS27114-03R: RNCC: 5 | RNVC: 9

19 Nov 1984

5340-01-188-5210
Grooved Clamp Coupling

011885210
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-09R: RNCC: 3 | RNVC: 2
6132A4M-288-Z: RNCC: 3 | RNVC: 2
MIL-DTL-27536/1-09R: RNCC: 5 | RNVC: 9
QS5355: RNCC: 5 | RNVC: 9
MS27114-09R: RNCC: 5 | RNVC: 9
QS5355: RNCC: 5 | RNVC: 9
AS5355/1-09R: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-01-129-1237
Dust And Moisture Seal Protective Cap-Plug

011291237
3269471: RNCC: 3 | RNVC: 2
717124417508: RNCC: 5 | RNVC: 9
3269471: RNCC: 5 | RNVC: 9
3269471: RNCC: 5 | RNVC: 9
5340PL0946090: RNCC: 6 | RNVC: 9
5340011291237: RNCC: 6 | RNVC: 9

1 Apr 1982

5340-01-187-9777
Spring Tension Clip

011879777
M24066/4-011: RNCC: 2 | RNVC: 2
NASM24066/4: RNCC: 5 | RNVC: 1
MIL-C-24066/4: RNCC: 5 | RNVC: 9

29 Aug 1984

5340-01-184-6031
Loop Clamp

011846031
4D7733: RNCC: 3 | RNVC: 2
4D-7733: RNCC: 5 | RNVC: 2

20 Jul 1984

5340-01-184-8504
Loop Clamp

011848504
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D9K: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-01-131-7692
Loop Clamp

011317692
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-28N: RNCC: 3 | RNVC: 2
10112595: RNCC: 6 | RNVC: 9

15 May 1982

5340-01-127-8603
Mending Plate

011278603
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-020: RNCC: 3 | RNVC: 2
MS9552-020: RNCC: 3 | RNVC: 9
MS9552-020: RNCC: 5 | RNVC: 9
10160006: RNCC: 6 | RNVC: 9

10 Mar 1982

5340-01-131-8576
Loop Clamp

011318576
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D3NW: RNCC: 3 | RNVC: 2

18 May 1982

5340-01-160-4121
Retaining Strap

011604121
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24-52N: RNCC: 3 | RNVC: 2
10112826: RNCC: 6 | RNVC: 9

21 Aug 1983

5340-01-128-2989
Loop Clamp

011282989
54967-5: RNCC: 3 | RNVC: 2
946.31.05.704: RNCC: 5 | RNVC: 2
HP5N45-003: RNCC: 5 | RNVC: 2
13152916-4: RNCC: 5 | RNVC: 2
295645-003: RNCC: 5 | RNVC: 2
HP-5N: RNCC: 5 | RNVC: 2
990117-5: RNCC: 5 | RNVC: 2
7432493P4: RNCC: 5 | RNVC: 9
PMS25281-002-05: RNCC: 7 | RNVC: 2
1857794-5: RNCC: 7 | RNVC: 2

20 Mar 1982

5340-01-130-0146
Webbing Strap

011300146
NAS1212: RNCC: 3 | RNVC: 1
NAS1212P10KE04: RNCC: 3 | RNVC: 2

15 Apr 1982

5340-01-126-9810
Loop Clamp

011269810
M85052/3-19: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000119HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112506: RNCC: 6 | RNVC: 9

21 Feb 1982

5340-01-134-1794
Spring Tension Clip

011341794
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-225: RNCC: 3 | RNVC: 2
M24066/2-025: RNCC: 5 | RNVC: 9
MIL-M-24066: RNCC: 5 | RNVC: 9
M24066-2-225: RNCC: 5 | RNVC: 9

28 Jun 1982

5340-01-142-4473
Spring Tension Clip

011424473
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-323: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-323: RNCC: 5 | RNVC: 9
5340PL1524771: RNCC: 6 | RNVC: 9
7904025-10: RNCC: C | RNVC: 1

16 Nov 1982

5340-01-126-9811
Loop Clamp

011269811
M85052/3-17: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000117HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112507: RNCC: 6 | RNVC: 9

21 Feb 1982

5340-01-123-4713
Loop Clamp

011234713
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-15N: RNCC: 3 | RNVC: 2
10112432: RNCC: 6 | RNVC: 9

12 Dec 1981

5340-01-127-0916
Loop Clamp

011270916
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-4S: RNCC: 3 | RNVC: 2
10112511: RNCC: 6 | RNVC: 9

23 Feb 1982

5340-00-035-7148
Helical Compression Spring Seat

000357148
SMSE2325PC7: RNCC: 3 | RNVC: 2
426356: RNCC: 3 | RNVC: 2
E1727PC7: RNCC: 5 | RNVC: 9
E1944PC7: RNCC: 5 | RNVC: 9
E2103PC7: RNCC: 5 | RNVC: 9
E1902PC7: RNCC: 5 | RNVC: 9
E1903PC7: RNCC: 5 | RNVC: 9
E2080PC7: RNCC: 5 | RNVC: 9
E1797PC7: RNCC: 5 | RNVC: 9
E2361PC7: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-01-132-6744
Turnbuckle

011326744
NAS1047: RNCC: 3 | RNVC: 1
NAS1047-5P045: RNCC: 3 | RNVC: 2

2 Jun 1982

5340-01-119-6062
Sealing Plug Assembly

011196062
SAE-AS3585: RNCC: 3 | RNVC: 1
AS3585-05: RNCC: 3 | RNVC: 2
PLGA2180020: RNCC: 5 | RNVC: 2
ST7M141C7S: RNCC: 5 | RNVC: 2
PLGA2180020: RNCC: 5 | RNVC: 9
218002: RNCC: 5 | RNVC: 9
AS3585-05: RNCC: 5 | RNVC: 9
093-49832-7: RNCC: 5 | RNVC: 9
572-524-9005: RNCC: 5 | RNVC: 9
999978-10: RNCC: 5 | RNVC: 9

26 Sep 1981

5340-01-114-0208
Retaining Strap

011140208
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C12-24N: RNCC: 3 | RNVC: 2

7 Jun 1981

5340-01-125-2084
Loop Clamp

011252084
M85052/1-20: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
9M972-20N: RNCC: 5 | RNVC: 1
SS7563-20NBC: RNCC: 5 | RNVC: 1
S651NB-20: RNCC: 5 | RNVC: 1
TA026000120NB: RNCC: 5 | RNVC: 1
JM44LC70WPH20YN: RNCC: 5 | RNVC: 1
JM44LC73WPH20YN: RNCC: 5 | RNVC: 1
1444PHW20Y: RNCC: 5 | RNVC: 1
9M972-20N: RNCC: 5 | RNVC: 1

24 Jan 1982

5340-01-132-1272
Retaining Strap

011321272
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-30N: RNCC: 3 | RNVC: 2
10112616: RNCC: 6 | RNVC: 9

22 May 1982

5340-01-080-0402
Dust And Moisture Seal Protective Plug

010800402
NAS836: RNCC: 3 | RNVC: 1
NAS836N8A: RNCC: 3 | RNVC: 2
M5501/1-8G: RNCC: 5 | RNVC: 9
MIL-C-5501/1: RNCC: 5 | RNVC: 9

18 Jul 1979

5340-01-083-8998
Loop Clamp

010838998
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D13KW: RNCC: 3 | RNVC: 2
10117602: RNCC: 6 | RNVC: 9

3 Oct 1979

5340-01-084-9550
Loop Clamp

010849550
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C4N: RNCC: 3 | RNVC: 2
MS9024-03: RNCC: 5 | RNVC: 9
143699: RNCC: 5 | RNVC: 9

26 Oct 1979

5340-01-087-2382
Loop Clamp

010872382
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D6N: RNCC: 3 | RNVC: 2

13 Dec 1979

5340-01-054-4934
Butt Hinge

010544934
AA55590-9A: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-9A: RNCC: 5 | RNVC: 9
MS35822-9A: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-01-082-2126
Loop Clamp

010822126
X275: RNCC: 3 | RNVC: 2
26425AX: RNCC: 5 | RNVC: 2
26425AX: RNCC: 5 | RNVC: 9
26425AX: RNCC: 5 | RNVC: 9
26425AX: RNCC: 6 | RNVC: 9
5340010822126: RNCC: 6 | RNVC: 9

28 Aug 1979

5340-01-087-5194
Loop Clamp

010875194
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D50KWX: RNCC: 3 | RNVC: 2
MS21122-50: RNCC: 5 | RNVC: 9
5340PL0847220: RNCC: 6 | RNVC: 9
5340PL1867767: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-01-054-6091
Butt Hinge

010546091
AA55590-15D: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-15D: RNCC: 5 | RNVC: 1

22 Jan 1978

5340-01-047-2065
Loop Clamp

010472065
MS9025-08: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Sep 1977

5340-01-063-5759
Bumper

010635759
9D9736: RNCC: 3 | RNVC: 2
9D-9736: RNCC: 5 | RNVC: 2

9 Aug 1978

5340-01-055-4195
Butt Hinge

010554195
AA55592-9D: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-9D: RNCC: 5 | RNVC: 1
MS35825-9D: RNCC: 5 | RNVC: 9

4 Feb 1978

5340-01-056-3063
Butt Hinge

010563063
AA55592-9A: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
AA55592A-9A: RNCC: 5 | RNVC: 9
MS35825-9A: RNCC: 5 | RNVC: 9
MS35825-9A: RNCC: 5 | RNVC: 9

19 Feb 1978

5340-01-049-4384
Loop Clamp

010494384
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-36N: RNCC: 3 | RNVC: 2

19 Oct 1977

5340-01-042-2493
Loop Clamp

010422493
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D20K: RNCC: 3 | RNVC: 2

7 Jun 1977

5340-01-045-7121
Loop Clamp

010457121
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7S: RNCC: 3 | RNVC: 2

7 Aug 1977

5340-01-053-3333
Loop Clamp

010533333
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C20SW: RNCC: 3 | RNVC: 2

1 Jan 1978

5340-01-046-0733
Angle Bracket

010460733
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-382: RNCC: 3 | RNVC: 2
MS9600-382: RNCC: 5 | RNVC: 9

11 Aug 1977

5340-01-081-1629
Bow Handle

010811629
NASM39087: RNCC: 3 | RNVC: 1
MS39087-412AN: RNCC: 3 | RNVC: 2
10993-A-1032-2: RNCC: 5 | RNVC: 2
10993-A-1032-2: RNCC: 5 | RNVC: 9
40-013603-01: RNCC: 5 | RNVC: 9
MS39087-412AN: RNCC: 5 | RNVC: 9

9 Aug 1979

5340-01-017-4626
Spring Tension Clip

010174626
M24066/2-333: RNCC: 2 | RNVC: 2
NASM24066/2: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-133: RNCC: 5 | RNVC: 9
336253-33: RNCC: 5 | RNVC: 9

7 Mar 1976

5340-01-018-6011
Loop Clamp

010186011
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-19N: RNCC: 3 | RNVC: 2

29 Mar 1976

5340-01-031-5267
Retaining Strap

010315267
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D14-40N: RNCC: 3 | RNVC: 2
10117556: RNCC: 6 | RNVC: 9

25 Nov 1976

5340-01-032-6929
Loop Clamp

010326929
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D7NH: RNCC: 3 | RNVC: 2
MS9352-06: RNCC: 5 | RNVC: 9
10117557: RNCC: 6 | RNVC: 9
310579: RNCC: C | RNVC: 1

18 Dec 1976

5340-01-033-9381
Expansion Plug

010339381
SAE-AS9379: RNCC: 3 | RNVC: 1
MS9379-03: RNCC: 3 | RNVC: 2
MS9379-03: RNCC: 5 | RNVC: 9

14 Jan 1977

5340-01-035-4454
Spring Tension Clip

010354454
3484-1000: RNCC: 3 | RNVC: 9
GC501BG1: RNCC: 5 | RNVC: 2
3484-1000: RNCC: 5 | RNVC: 2
1805624-1: RNCC: 5 | RNVC: 2
3484-1000: RNCC: 5 | RNVC: 2
1115707: RNCC: 5 | RNVC: 2
80-6100-2669-4: RNCC: 5 | RNVC: 2
0671021: RNCC: 5 | RNVC: 2
343-0775-00: RNCC: 5 | RNVC: 2
14394500-01: RNCC: 5 | RNVC: 9

10 Feb 1977

5340-01-032-3973
Loop Clamp

010323973
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-13N: RNCC: 3 | RNVC: 2
10117555: RNCC: 6 | RNVC: 9

14 Dec 1976

5340-00-248-3059
Utility Resilient Mount

002483059
MS91527-1BDD: RNCC: 2 | RNVC: 2
J5572-69: RNCC: 5 | RNVC: 1
L44-AA-1BDD: RNCC: 5 | RNVC: 1
3100.6B: RNCC: 5 | RNVC: 9

5 Mar 1969

5340-00-988-3186
Loop Clamp

009883186
NASM21333: RNCC: 3 | RNVC: 1
MS21333-19: RNCC: 3 | RNVC: 2
MS21333-19: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-010-3845
Spring Tension Clip

010103845
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-018-04C: RNCC: 3 | RNVC: 2
6015-46C: RNCC: 5 | RNVC: 2
6015-46C: RNCC: 5 | RNVC: 9
10117533: RNCC: 6 | RNVC: 9

28 Sep 1975

5340-01-010-4541
Loop Clamp

010104541
SAE-AS9353: RNCC: 3 | RNVC: 1
MS9353-06: RNCC: 3 | RNVC: 2
MS9353-06: RNCC: 3 | RNVC: 9
MS9353-06: RNCC: 5 | RNVC: 9

29 Sep 1975

5340-01-014-2801
Sealing Plug Assembly

010142801
SAE-AS3588: RNCC: 3 | RNVC: 1
AS3588-03: RNCC: 3 | RNVC: 2
AS3588-03: RNCC: 3 | RNVC: 2
156001: RNCC: 5 | RNVC: 2
PLGA1560010: RNCC: 5 | RNVC: 2
42312-120: RNCC: 5 | RNVC: 2
PLGA1560010A: RNCC: 5 | RNVC: 2
1AB: RNCC: 5 | RNVC: 9
AS3588-03: RNCC: 5 | RNVC: 9
ST7M141D5S: RNCC: 5 | RNVC: 9

18 Dec 1975

5340-01-016-8180
Dust And Moisture Seal Protective Cap

010168180
NAS835: RNCC: 3 | RNVC: 1
NAS835-6A: RNCC: 3 | RNVC: 2
M5501/3-6: RNCC: 5 | RNVC: 9
MIL-C-5501/3: RNCC: 5 | RNVC: 9
10117546: RNCC: 6 | RNVC: 9
5340PL1449998: RNCC: 6 | RNVC: 9
NAS817-6: RNCC: C | RNVC: 1

25 Feb 1976

5340-00-947-4784
Retaining Strap

009474784
NASM21314: RNCC: 3 | RNVC: 1
MS21314-12: RNCC: 3 | RNVC: 2
MS21314-12: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9

1 Apr 1966

5340-00-983-1443
Manual Control Handle

009831443
NAS1637: RNCC: 3 | RNVC: 1
NAS1637-5B: RNCC: 3 | RNVC: 2
61L14-2-2AA: RNCC: 5 | RNVC: 2
61L14-2-2AA: RNCC: 5 | RNVC: 2
5L.3741.003.89: RNCC: 5 | RNVC: 2

17 Oct 1966

5340-00-947-7024
Snap Hook

009477024
NAS1285: RNCC: 3 | RNVC: 1
NAS1285-1: RNCC: 3 | RNVC: 2

1 Apr 1966

5340-00-926-5449
Loop Clamp

009265449
NASM21334: RNCC: 3 | RNVC: 1
MS21334-28: RNCC: 3 | RNVC: 2
MS21334-28: RNCC: 5 | RNVC: 9

21 Mar 1967

5340-00-926-5453
Loop Clamp

009265453
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F20: RNCC: 3 | RNVC: 2
MS25281F20: RNCC: 5 | RNVC: 9
MS25281-F20: RNCC: 5 | RNVC: 9
MS25281-F20: RNCC: C | RNVC: 1

13 Apr 1967

5340-00-880-5949
Loop Clamp

008805949
NASM21333: RNCC: 3 | RNVC: 1
MS21333-9: RNCC: 3 | RNVC: 2
MS21333-9: RNCC: 5 | RNVC: 9
MS122908: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-973-8630
Sealing Plug Assembly

009738630
ST7M141D8L: RNCC: 3 | RNVC: 2
250101: RNCC: 5 | RNVC: 2
STD288-19: RNCC: 5 | RNVC: 2
250101: RNCC: 5 | RNVC: 9
572-523-9104: RNCC: 5 | RNVC: 9
STD288-19: RNCC: 5 | RNVC: 9
6310004: RNCC: 5 | RNVC: 9
PLGA2501010: RNCC: 5 | RNVC: 9
44300-670: RNCC: 5 | RNVC: 9
6310004: RNCC: 5 | RNVC: 9

30 Sep 1966

5340-00-972-1641
Loop Clamp

009721641
3-16-2NA: RNCC: 3 | RNVC: 2
ST21900021-113: RNCC: 5 | RNVC: 2
SM-D-2015484-9: RNCC: 5 | RNVC: 2
7728419P18: RNCC: 5 | RNVC: 2
3-16 2NA: RNCC: 5 | RNVC: 2
147300010: RNCC: 5 | RNVC: 2
1810685-14: RNCC: 5 | RNVC: 2
F2NY-187-NA: RNCC: 5 | RNVC: 2
F2NY-187-9: RNCC: 5 | RNVC: 9
24763-0009: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-010-2693
Spring Tension Clip

010102693
M24066/4-005: RNCC: 2 | RNVC: 2
NASM24066/4: RNCC: 5 | RNVC: 1
A05201: RNCC: 5 | RNVC: 2
MIL-C-24066/4: RNCC: 5 | RNVC: 9

25 Sep 1975

5340-01-004-9587
Angle Bracket

010049587
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-216: RNCC: 3 | RNVC: 2
MS9593-216: RNCC: 3 | RNVC: 9
MS9593-216: RNCC: 5 | RNVC: 9

1 Jun 1985

5340-00-854-6730
Loop Clamp

008546730
NASM21333: RNCC: 3 | RNVC: 1
MS21333-124: RNCC: 3 | RNVC: 2
CMDX2-3PT573047: RNCC: 5 | RNVC: 2
MS21333-124: RNCC: 5 | RNVC: 9
MS21333-124: RNCC: 5 | RNVC: 9
5340008546730: RNCC: 5 | RNVC: 9
5340PL0835597: RNCC: 6 | RNVC: 9
13207E2948FN35: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-900-4630
Spring Tension Clip

009004630
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-05C: RNCC: 3 | RNVC: 2
5340PL0909019: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-874-2451
Loop Clamp

008742451
F1NY-125BK: RNCC: 3 | RNVC: 2
11041054-13: RNCC: 5 | RNVC: 2
076-004967-003: RNCC: 5 | RNVC: 2
103049-30: RNCC: 5 | RNVC: 2
F1NY-125-0: RNCC: 5 | RNVC: 2
182262-1: RNCC: 5 | RNVC: 2
04MW021-001: RNCC: 5 | RNVC: 2
F1NY-125BK: RNCC: 5 | RNVC: 9
FINY-125BK: RNCC: 5 | RNVC: 9
1-8J: RNCC: 5 | RNVC: 9

10 Nov 1967

5340-01-440-4536
Clamp Bolt Assembly

014404536
M85731/1-9: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
500020: RNCC: 5 | RNVC: 9
2132564-1: RNCC: 5 | RNVC: 9
2132564-1: RNCC: C | RNVC: 1
ST9M454-5-2: RNCC: C | RNVC: 1

14 Jan 1997

5340-00-842-1737
Nut And Bolt Retainer

008421737
NAS578: RNCC: 3 | RNVC: 1
NAS578-12A: RNCC: 3 | RNVC: 2
2577-126RET: RNCC: 5 | RNVC: 9

23 Dec 1966

5340-00-662-9757
Loop Clamp

006629757
MS9024-09: RNCC: 2 | RNVC: 2
MS9024: RNCC: 4 | RNVC: 1
6739842-12: RNCC: 5 | RNVC: 1
6739842-12: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-662-9735
Rod End Clevis

006629735
5150312: RNCC: 3 | RNVC: 2
5150312: RNCC: 3 | RNVC: 2
B5150312: RNCC: 5 | RNVC: 2
1DD464: RNCC: 5 | RNVC: 2
1DD464: RNCC: 5 | RNVC: 9
GM5150312: RNCC: 5 | RNVC: 9
PC5150312: RNCC: 5 | RNVC: 9
K-5150312: RNCC: 5 | RNVC: 9
5150312: RNCC: 5 | RNVC: 9
5150312: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-771-2088
Clamp Bolt Assembly

007712088
NAS573: RNCC: 3 | RNVC: 1
NAS573-2: RNCC: 3 | RNVC: 2
SL1213-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-725-5280
Loop Clamp

007255280
NASM21333: RNCC: 3 | RNVC: 1
12600954-013: RNCC: 3 | RNVC: 2
MS21333-125: RNCC: 3 | RNVC: 2
COV-1113: RNCC: 5 | RNVC: 2
2521HX: RNCC: 5 | RNVC: 2
NASM21333-125: RNCC: 5 | RNVC: 9
MS21333-125: RNCC: 5 | RNVC: 9
5340007255280: RNCC: 5 | RNVC: 9
2521HX: RNCC: 5 | RNVC: 9
TA720S10: RNCC: C | RNVC: 1

1 Jan 1961

5340-00-804-1242
Dust And Moisture Seal Protective Plug

008041242
NAS847: RNCC: 3 | RNVC: 1
NAS842-2A: RNCC: 3 | RNVC: 2
M5501/2-2: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-804-1519
Bow Handle

008041519
10062088-101: RNCC: 3 | RNVC: 2
S041-8: RNCC: 3 | RNVC: 9
10541A1032-2: RNCC: 5 | RNVC: 2
8438911: RNCC: 5 | RNVC: 2
53408041519: RNCC: 5 | RNVC: 9
10062088-101: RNCC: 5 | RNVC: 9
415-1270-01-14: RNCC: 5 | RNVC: 9
1270-1: RNCC: 5 | RNVC: 9
10541A1032-2: RNCC: 5 | RNVC: 9
HE195-0006-1005: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-804-1222
Dust And Moisture Seal Protective Plug

008041222
NAS847: RNCC: 3 | RNVC: 1
NAS842-16A: RNCC: 3 | RNVC: 2
MIL-C-5501 SIZE 16: RNCC: 5 | RNVC: 9
M5501/2-16: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-809-4389
Nut And Bolt Retainer

008094389
NAS578: RNCC: 3 | RNVC: 1
NAS578-7A: RNCC: 3 | RNVC: 2
2577-070RET: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-429-4643
Loop Clamp

014294643
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D4-12N: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-01-423-0983
Dust And Moisture Seal Protective Cap-Plug

014230983
NAS834: RNCC: 3 | RNVC: 1
NAS834-131: RNCC: 3 | RNVC: 2
M5501/7-F26: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9

16 Apr 1982

5340-01-434-2317
Dust And Moisture Seal Protective Cap

014342317
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-313: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-313: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-434-2427
Dust And Moisture Seal Protective Cap

014342427
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-2880: RNCC: 3 | RNVC: 2
M5501/31-2880: RNCC: 5 | RNVC: 9
MIL-C-5501/31: RNCC: 5 | RNVC: 9
NASM5501/31-2880: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-434-2429
Dust And Moisture Seal Protective Cap

014342429
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-2960: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-2960: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-408-8527
Access Cover

014088527
4P4224: RNCC: 3 | RNVC: 2
5340014088527: RNCC: 6 | RNVC: 9

28 Feb 1995

5340-01-420-0767
Bow Handle

014200767
NASM39087: RNCC: 3 | RNVC: 1
MS39087-301AN: RNCC: 3 | RNVC: 2
MS39087-301AN: RNCC: 5 | RNVC: 9

6 Oct 1995

5340-01-543-2876
Retaining Strap

015432876
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-26S: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-00-616-4978
Spring Tension Clip

006164978
M24066/-329: RNCC: 2 | RNVC: 2
100-200-1-11: RNCC: 5 | RNVC: 1
NASM24066/2: RNCC: 5 | RNVC: 1
100-200-11-1: RNCC: 5 | RNVC: 1
5800332-9009-017: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
6017-77A: RNCC: E | RNVC: 8
MS17160-29: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-776-5920
Handle Grip

007765920
M16377/53-002: RNCC: 2 | RNVC: 2
M16377-53-002: RNCC: 2 | RNVC: 2
MIL-DTL-16377/53: RNCC: 4 | RNVC: 1
MILF16377-53: RNCC: 5 | RNVC: 9
MS17231PCS8-14-18-19-37-38-46-50: RNCC: 5 | RNVC: 9
5340PL1362344: RNCC: 6 | RNVC: 9
MILF16377/53: RNCC: C | RNVC: 1
MS17231: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-664-8118
Butt Hinge

006648118
MS20001P6-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001P6-7200: RNCC: 5 | RNVC: 1
MS20001PY6-804: RNCC: 5 | RNVC: 9
MS20001P6-2550: RNCC: 5 | RNVC: 9
MS20001PX6-804: RNCC: 5 | RNVC: 9
MS2001-6-19D: RNCC: 5 | RNVC: 9
MS20001P6-249: RNCC: 5 | RNVC: 9
MS20001P6+750: RNCC: 5 | RNVC: 9
MS20001PX6-300: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-557-1625
Dust And Moisture Seal Protective Cap-Plug

005571625
2061K72P010: RNCC: 3 | RNVC: 2
CB69-8: RNCC: 5 | RNVC: 2
503: RNCC: 5 | RNVC: 2
231784-12: RNCC: 5 | RNVC: 2
732249-36: RNCC: 5 | RNVC: 2
025-0503-000: RNCC: 5 | RNVC: 2
F135-1-10: RNCC: 5 | RNVC: 2
025-0503-000: RNCC: 5 | RNVC: 2
9009461: RNCC: 5 | RNVC: 2
1053760-8: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-550-1560
Spring Tension Clip

005501560
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-330: RNCC: 3 | RNVC: 2
336253-30: RNCC: 5 | RNVC: 1
416949-30: RNCC: 5 | RNVC: 2
M24066-2-130: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
B24066/2-130: RNCC: 5 | RNVC: 9
M24066/2-330: RNCC: 5 | RNVC: 9

18 Oct 1974

5340-00-619-3189
Loop Clamp

006193189
AN742H12: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-598-6462
Spring Tension Clip

005986462
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-238: RNCC: 3 | RNVC: 2
100-300-6-0: RNCC: 5 | RNVC: 1
076-004569-038: RNCC: 5 | RNVC: 1
M24066/2-038: RNCC: 5 | RNVC: 9
M24066/2-238: RNCC: 5 | RNVC: 9
6001-107CC: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9

16 Jan 1975

NSN 5340-00-838-5268 008385268 PADLOCK SET

5340-00-838-5268
Padlock Set

008385268
AA59486-1AB30S3: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
MIL-P-17802D: RNCC: 5 | RNVC: 9
MS21313-128: RNCC: 5 | RNVC: 9
A-A-1927C: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-838-9402
Snap Hook

008389402
NAS1282: RNCC: 3 | RNVC: 1
NAS1282B10: RNCC: 3 | RNVC: 2
125 5-8: RNCC: 5 | RNVC: 2
125 5-8: RNCC: 5 | RNVC: 9
125-5-8: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-530-6833
Loop Clamp

005306833
SAE AS23190: RNCC: 3 | RNVC: 1
SAE-AS25281: RNCC: 3 | RNVC: 1
SAE AS25281: RNCC: 3 | RNVC: 1
MS25281-R9: RNCC: 3 | RNVC: 2
NMCCL141N9: RNCC: 5 | RNVC: 1
HP9NG1: RNCC: 5 | RNVC: 1
4116200-560: RNCC: 5 | RNVC: 1
MS25281-R9: RNCC: 5 | RNVC: 9
HP9NG1: RNCC: 5 | RNVC: 9
5340005306833: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-598-6284
Bumper

005986284
868-2: RNCC: 3 | RNVC: 1
7613363PT4: RNCC: 3 | RNVC: 2
512A13: RNCC: 3 | RNVC: 2
712633-1: RNCC: 3 | RNVC: 2
A3794: RNCC: 3 | RNVC: 2
109B1033: RNCC: 3 | RNVC: 2
3135P1: RNCC: 3 | RNVC: 2
109A1033: RNCC: 3 | RNVC: 2
2104001: RNCC: 3 | RNVC: 2
3135P1: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-760-7485
Loop Clamp

007607485
NASM21322: RNCC: 3 | RNVC: 1
MS21322-16: RNCC: 3 | RNVC: 2
MS21322-16: RNCC: 5 | RNVC: 9

27 Oct 1969

5340-00-576-9337
Loop Clamp

005769337
AN742H16: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
5340PL1524880: RNCC: 6 | RNVC: 9
MS21103-16: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-841-2111
Webbing Strap

008412111
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10B7: RNCC: 3 | RNVC: 2

28 Dec 1966

5340-00-596-7231
Nut And Bolt Retainer

005967231
6800-02: RNCC: 3 | RNVC: 2
BL2971: RNCC: 3 | RNVC: 2
6800-02: RNCC: 3 | RNVC: 2
6800-02: RNCC: 3 | RNVC: 2
B-1355-3BC: RNCC: 3 | RNVC: 2
6800-02: RNCC: 3 | RNVC: 2
9M156-3: RNCC: 5 | RNVC: 2
110-095-1D: RNCC: 5 | RNVC: 2
BACR10G131: RNCC: 5 | RNVC: 2
BACR10G31: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-597-8594
Rod End Clevis

005978594
AN665-10L: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1
T5683: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-597-4480
Dust And Moisture Seal Protective Cap

005974480
NAS847: RNCC: 3 | RNVC: 1
NAS844-15: RNCC: 3 | RNVC: 2
832944: RNCC: 5 | RNVC: 1
69819-24: RNCC: 5 | RNVC: 1
AH3084C: RNCC: 5 | RNVC: 1
M5501/9-F15: RNCC: 5 | RNVC: 9
1704-24: RNCC: 5 | RNVC: 9
10-609-7-SC: RNCC: 5 | RNVC: 9
SC-7/8: RNCC: 5 | RNVC: 9
C-24: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-01-413-7820
Loop Clamp

014137820
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C14Z: RNCC: 3 | RNVC: 2

23 May 1995

5340-01-419-2378
Manual Control Lever

014192378
DV202155-13: RNCC: 3 | RNVC: 2
1905AS155-13: RNCC: 5 | RNVC: 9
13-1475: RNCC: 5 | RNVC: 9
1905AS155-13: RNCC: 5 | RNVC: 9

17 Sep 1995

5340-01-392-7383
Spacing Threaded Standoff

013927383
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C04: RNCC: 3 | RNVC: 2
9737-0440-7: RNCC: 5 | RNVC: 2
2698051-43: RNCC: 5 | RNVC: 2
9737-0440-7: RNCC: 5 | RNVC: 9

6 Jul 1994

5340-01-434-2310
Dust And Moisture Seal Protective Cap

014342310
NASM5501/32: RNCC: 3 | RNVC: 1
M5501/32-37S: RNCC: 3 | RNVC: 2
MIL-C-5501/32: RNCC: 5 | RNVC: 9
M5501/32-37S: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-416-4782
Butt Hinge

014164782
MS20001P4-900: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
3-12397-21: RNCC: 5 | RNVC: 1

19 Jul 1995

5340-00-664-1667
Hinged Hasp

006641667
BHMA-A156.20: RNCC: 3 | RNVC: 1
A83131: RNCC: 3 | RNVC: 2
BHMA-A156.20 A83131 4-1/2IN: RNCC: 3 | RNVC: 2
ANSI/BHMA A156.20: RNCC: 5 | RNVC: 2
ANSI A156.20: RNCC: 5 | RNVC: 9
FF-H-111: RNCC: 5 | RNVC: 9
A-A-472: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-526-3262
Loop Clamp

005263262
AS5587C08: RNCC: 2 | RNVC: 2
SAE-AS5587: RNCC: 5 | RNVC: 1
AN742H8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-526-3923
Luggage Handle

005263923
VPC-860-SSPIN: RNCC: 3 | RNVC: 9
VPC-860: RNCC: 5 | RNVC: 9
12090-B-3724-999: RNCC: 5 | RNVC: 9
12090B3724-25A: RNCC: 5 | RNVC: 9
12090B3724-25D: RNCC: 5 | RNVC: 9
ES6728-1: RNCC: 5 | RNVC: 9
93-415-1900-01-00-01: RNCC: 5 | RNVC: 9
12090-B-3724-999: RNCC: 5 | RNVC: 9
231-1255P4: RNCC: 5 | RNVC: 9
114: RNCC: 5 | RNVC: 9

28 Aug 1974

5340-00-527-0954
Loop Clamp

005270954
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C13N: RNCC: 3 | RNVC: 2
MS9024-12: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-598-0228
Loop Clamp

005980228
AN742-40: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-418-2843
Spacing Threaded Standoff

014182843
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E09: RNCC: 3 | RNVC: 2

23 Aug 1995

5340-01-542-4033
Loop Clamp

015424033
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K4EB: RNCC: 3 | RNVC: 2
NAS1397K4DB: RNCC: 5 | RNVC: 9

3 Aug 2006

5340-00-728-9405
Loop Clamp

007289405
NASM21322: RNCC: 3 | RNVC: 1
MS21322-12: RNCC: 3 | RNVC: 2
MS21322-12: RNCC: 5 | RNVC: 9

10 Oct 1966

5340-00-543-3936
Angle Bracket

005433936
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743P-12: RNCC: 3 | RNVC: 2
AN743P12: RNCC: 3 | RNVC: 2
AN743P12: RNCC: 5 | RNVC: 9
SAE-AS7431: RNCC: 5 | RNVC: 9
AN743P12: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-543-4781
Loop Clamp

005434781
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C32M: RNCC: 3 | RNVC: 2

2 Oct 1974

5340-01-642-0105
Split Tubular Clip

016420105
167-7384258-111: RNCC: 3 | RNVC: 1
H5471905-0111: RNCC: 5 | RNVC: 1
7383858-H5471905-0111: RNCC: 5 | RNVC: 1
C0V-1013: RNCC: 5 | RNVC: 1
H547-0001-H5471905-0111: RNCC: 5 | RNVC: 1
H547-1905-111: RNCC: 5 | RNVC: 1
7383858-H5471905-0111D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-0111D4: RNCC: 5 | RNVC: 2
H547-1905-111D4: RNCC: 5 | RNVC: 2
C0V-1013D4: RNCC: 5 | RNVC: 2

10 Feb 2015

5340-00-500-1479
Loop Clamp

005001479
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT5K: RNCC: 3 | RNVC: 2

6 Jul 1974

5340-00-200-3046
Loop Clamp

002003046
AS5587C02: RNCC: 2 | RNVC: 2
SAE-AS5587: RNCC: 5 | RNVC: 1
AN742F2: RNCC: 5 | RNVC: 9
AN742C2: RNCC: 5 | RNVC: 9
5340PL0845410: RNCC: 6 | RNVC: 9
5340PL1866819: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-200-7561
Tee Hinge

002007561
MS27970-12: RNCC: 2 | RNVC: 2
924: RNCC: 5 | RNVC: 1
SC928: RNCC: 5 | RNVC: 1
BHMA-A156.20: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-267-9696
Rod End Clevis

002679696
MS21252-10LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-10LL: RNCC: 5 | RNVC: 1
MS21252-10LL: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-270-7258
Spring Tension Clip

002707258
NASM24066/2: RNCC: 3 | RNVC: 1
100-300-13-0: RNCC: 3 | RNVC: 2
M24066/2-244: RNCC: 3 | RNVC: 2
6020-84CC: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
MS24066/2-244: RNCC: 5 | RNVC: 9
M24066/2-244: RNCC: 5 | RNVC: 9
M24066/2-044: RNCC: 5 | RNVC: 9
6020-84CC: RNCC: C | RNVC: 1
MS17160-144: RNCC: E | RNVC: 8

28 Jul 1973

5340-00-218-5907
Dust And Moisture Seal Protective Cap

002185907
AC5261-1: RNCC: 3 | RNVC: 9
325-8: RNCC: 5 | RNVC: 9
3N6PC325: RNCC: 5 | RNVC: 9
3N144PC91: RNCC: 5 | RNVC: 9
3N30PC325: RNCC: 5 | RNVC: 9
3N40PC325: RNCC: 5 | RNVC: 9
3N73PC325: RNCC: 5 | RNVC: 9
3N170PC6: RNCC: 5 | RNVC: 9
3N23-5PC325: RNCC: 5 | RNVC: 9
3N182PC6: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-342-5577
Dust And Moisture Seal Protective Cap-Plug

003425577
8486438: RNCC: 1 | RNVC: 2
025-466-000: RNCC: 3 | RNVC: 2
025-0466-000: RNCC: 5 | RNVC: 2
025-0466-000: RNCC: 5 | RNVC: 2
025-0466-000: RNCC: 5 | RNVC: 9
025-0466-000: RNCC: 5 | RNVC: 9
025-0466-000: RNCC: 5 | RNVC: 9
10117341: RNCC: 6 | RNVC: 9
99-779-6059: RNCC: 6 | RNVC: 9
188462-1: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-229-4361
Butt Hinge

002294361
BHMA-A156.1: RNCC: 3 | RNVC: 1
BHMA-A156.1 A2112 4-1/2IN: RNCC: 3 | RNVC: 2
A156.1 A2112: RNCC: 5 | RNVC: 9
FFH116: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-230-2018
Loop Clamp

002302018
MS21106-10: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

19 Mar 1971

5340-00-420-1746
Loop Clamp

004201746
JM44LC17-H05PB: RNCC: 3 | RNVC: 2
S500-5: RNCC: 3 | RNVC: 2
11168-04: RNCC: 3 | RNVC: 2
23039030-04: RNCC: 5 | RNVC: 2
BACC10HS05: RNCC: 5 | RNVC: 2
9M367-5: RNCC: 5 | RNVC: 9
JM44LC19S5AC: RNCC: 5 | RNVC: 9
S88CS5: RNCC: 5 | RNVC: 9
S500-05: RNCC: 5 | RNVC: 9
11168-04: RNCC: 5 | RNVC: 9

12 Mar 1969

5340-00-480-2237
Spring Tension Clip

004802237
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B032-06C: RNCC: 3 | RNVC: 2

8 Sep 1970

5340-00-240-2315
Barrel Bolt

002402315
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 L14213 5IN: RNCC: 3 | RNVC: 2
A156.16 TYPE L14213 5"LG: RNCC: 5 | RNVC: 9
FFH00111TYPE1011: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-279-4189
Angle Bracket

002794189
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-046: RNCC: 3 | RNVC: 2
MS9600-046: RNCC: 3 | RNVC: 9
MS9600-046: RNCC: 5 | RNVC: 2
MS9600-046: RNCC: 5 | RNVC: 9

12 Aug 1973

5340-00-282-7383
Expansion Plug

002827383
HP1250B81: RNCC: 3 | RNVC: 2
S720: RNCC: 5 | RNVC: 2
51091: RNCC: 5 | RNVC: 2
609A: RNCC: 5 | RNVC: 2
66A4: RNCC: 5 | RNVC: 2
66A4: RNCC: 5 | RNVC: 9
1609A: RNCC: 5 | RNVC: 9
1609A: RNCC: 5 | RNVC: 9
103895: RNCC: 5 | RNVC: 9
S707: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-290-0808
Loop Clamp

002900808
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-15: RNCC: 3 | RNVC: 2
AS 7351-15: RNCC: 3 | RNVC: 9
SAE AS 7351-15: RNCC: 5 | RNVC: 9
AN735-15: RNCC: 5 | RNVC: 9
AS 7351-15: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-290-3610
Loop Clamp

002903610
SAE-AS7351: RNCC: 3 | RNVC: 1
8195985: RNCC: 3 | RNVC: 2
AN735-7: RNCC: 3 | RNVC: 2
AN735-7: RNCC: 5 | RNVC: 1
AS7351-7: RNCC: 5 | RNVC: 9
AS7351-7: RNCC: 5 | RNVC: 9
10117322: RNCC: 6 | RNVC: 9
AN735C21: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-292-3292
Dust And Moisture Seal Protective Plug

002923292
NAS836: RNCC: 3 | RNVC: 1
NAS836-6A: RNCC: 3 | RNVC: 2
SP6: RNCC: 3 | RNVC: 2
NAS836-6A: RNCC: 5 | RNVC: 1
45197-6: RNCC: 5 | RNVC: 2
8161820: RNCC: 5 | RNVC: 2
110126-5: RNCC: 5 | RNVC: 2
81584: RNCC: 5 | RNVC: 2
212662: RNCC: 5 | RNVC: 2
158206: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-298-9477
Loop Clamp

002989477
AN742-10: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
8496197: RNCC: 5 | RNVC: 1
69810-10: RNCC: 5 | RNVC: 1
MILC8063TYPE1CLASSB: RNCC: 5 | RNVC: 9
S127057-10: RNCC: 5 | RNVC: 9
242T1094: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-298-9474
Loop Clamp

002989474
AN742D2: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
755-2: RNCC: 5 | RNVC: 1
AS5587D2: RNCC: 5 | RNVC: 1
9M144-2D: RNCC: 5 | RNVC: 1
AS5587D2: RNCC: 5 | RNVC: 9
2052927: RNCC: 5 | RNVC: 9
10117328: RNCC: 6 | RNVC: 9
5340PL0731708: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-353-2988
Filler Opening Cap

003532988
FC-12105: RNCC: 3 | RNVC: 2
F18299: RNCC: 3 | RNVC: 2
FC18299: RNCC: 5 | RNVC: 2
8017021: RNCC: 5 | RNVC: 2
230846R91: RNCC: 5 | RNVC: 9
6951286: RNCC: 5 | RNVC: 9
230846R91: RNCC: 5 | RNVC: 9
FC18299B: RNCC: 5 | RNVC: 9
929399C1: RNCC: 5 | RNVC: 9
929399C1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-351-4085
Loop Clamp

003514085
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF14: RNCC: 3 | RNVC: 2
AS21919WDF14: RNCC: 3 | RNVC: 9
AS21919WDF14: RNCC: 5 | RNVC: 2
90601605: RNCC: 5 | RNVC: 2
5M44LC28WD144YN: RNCC: 5 | RNVC: 9
S663WDF14: RNCC: 5 | RNVC: 9
JM44LC28WD14YN: RNCC: 5 | RNVC: 9
ST9M588WDF14: RNCC: 5 | RNVC: 9
MS21919WDF14: RNCC: 5 | RNVC: 9

3 Apr 1970

5340-00-369-1411
Loop Clamp

003691411
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C14TW: RNCC: 3 | RNVC: 2

3 Mar 1974

5340-00-425-1349
Loop Clamp

004251349
NASM21334: RNCC: 3 | RNVC: 1
MS21334-23: RNCC: 3 | RNVC: 2
NASM21334-23: RNCC: 5 | RNVC: 9
MS21334-23: RNCC: C | RNVC: 1

4 May 1974

5340-00-458-2028
Loop Clamp

004582028
NASM21334: RNCC: 3 | RNVC: 1
MS21334-29: RNCC: 3 | RNVC: 2
MS21334-29: RNCC: 5 | RNVC: 9
10086645: RNCC: 6 | RNVC: 9

7 May 1969

5340-01-364-7271
Angle Bracket

013647271
325D212-12: RNCC: 3 | RNVC: 2
10476998: RNCC: 6 | RNVC: 9

24 Sep 1992

5340-01-343-5919
Clamping Catch

013435919
91261-1: RNCC: 3 | RNVC: 2
H619K3101: RNCC: 3 | RNVC: 2
HK5L6190K3-01: RNCC: 5 | RNVC: 2
5340PL0909072: RNCC: 6 | RNVC: 9
C20658-1: RNCC: 7 | RNVC: 2

15 Aug 1991

5340-01-337-3996
Loop Clamp

013373996
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C6: RNCC: 3 | RNVC: 2
AN735C6: RNCC: 5 | RNVC: 9

14 Apr 1991

5340-01-338-3246
Butt Hinge

013383246
MS20001-12-2654: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

1 May 1991

5340-01-345-0729
Loop Clamp

013450729
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-14S: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-01-350-0372
Angle Bracket

013500372
SAE-AS9602: RNCC: 3 | RNVC: 1
MS9602-186: RNCC: 3 | RNVC: 2
MS9602-186: RNCC: 5 | RNVC: 9

9 Dec 1991

5340-00-400-3427
Loop Clamp

004003427
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C18KH: RNCC: 3 | RNVC: 2
MS9350-17: RNCC: 5 | RNVC: 9

7 Mar 1969

5340-00-193-0113
Loop Clamp

001930113
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D36: RNCC: 3 | RNVC: 2
AN35D36: RNCC: 3 | RNVC: 9
AN35D36: RNCC: 5 | RNVC: 9
AN735D36: RNCC: 5 | RNVC: 9
AN735D36: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-494-2234
Loop Clamp

004942234
NASM21334: RNCC: 3 | RNVC: 1
MS21334-3: RNCC: 3 | RNVC: 2
MS21334-3: RNCC: 5 | RNVC: 9

12 Oct 1970

5340-00-494-2528
Loop Clamp

004942528
MS9025-24: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

11 Jun 1969

5340-00-197-0668
Loop Clamp

001970668
AN742-2: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
10117290: RNCC: 6 | RNVC: 9
MS21103-2: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-196-2704
Retaining Strap

001962704
BA100070-19: RNCC: 3 | RNVC: 2
BA10070-19: RNCC: 3 | RNVC: 2
BA100070-1: RNCC: 3 | RNVC: 2
1104S: RNCC: 5 | RNVC: 9
BA100070-19: RNCC: 5 | RNVC: 9
BA100070-1: RNCC: 5 | RNVC: 9
BA100070-19: RNCC: 5 | RNVC: 9
BA100070-1: RNCC: 5 | RNVC: 9
BA100070-19: RNCC: 5 | RNVC: 9
BA100070-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-158-3807
Padlock

001583807
AA59487-2SC: RNCC: 2 | RNVC: 2
A-A-59487: RNCC: 4 | RNVC: 1
A5200GLWN: RNCC: 5 | RNVC: 1
MIL-P-17802 GR2CL1STATYA: RNCC: 5 | RNVC: 1
5200 GL W/CHAIN: RNCC: 5 | RNVC: 9
1362720: RNCC: 5 | RNVC: 9
5340-00-158-3807: RNCC: 5 | RNVC: 9
MS35647-9: RNCC: 5 | RNVC: 9
MILP17802: RNCC: 5 | RNVC: 9
5200GLW: RNCC: 5 | RNVC: 9

26 Mar 1971

5340-00-159-3899
Loop Clamp

001593899
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-12NW: RNCC: 3 | RNVC: 2

18 Aug 1971

5340-00-177-4118
Loop Clamp

001774118
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C10T: RNCC: 3 | RNVC: 2

10 Dec 1969

5340-00-177-4120
Loop Clamp

001774120
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C17T: RNCC: 3 | RNVC: 2

26 Nov 1969

5340-00-200-2993
Loop Clamp

002002993
AN742-18: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1961

5340-01-313-6737
Electrical-Mechanical Equipment Post

013136737
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A4E12: RNCC: 3 | RNVC: 2
9798-A-0632-10: RNCC: 5 | RNVC: 2
9798-A-0632-10: RNCC: 5 | RNVC: 9

13 Jan 1990

5340-01-321-8541
Retaining Strap

013218541
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C20W24N: RNCC: 3 | RNVC: 2

23 Jun 1990

5340-01-324-5038
Angle Bracket

013245038
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-430: RNCC: 3 | RNVC: 2
MS9601-430: RNCC: 5 | RNVC: 9

19 Aug 1990

5340-01-341-5067
Butt Hinge Leaf

013415067
MS20001PY8-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

1 Jul 1991

5340-01-322-1059
Retaining Strap

013221059
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16W32N: RNCC: 3 | RNVC: 2

28 Jun 1990

5340-00-116-6767
Helical Compression Spring Seat

001166767
240341: RNCC: 3 | RNVC: 2
9030280: RNCC: 5 | RNVC: 2
K-500-CH-1494: RNCC: 5 | RNVC: 2
745 240341: RNCC: 5 | RNVC: 2
321748R1: RNCC: 5 | RNVC: 2
L31535: RNCC: 5 | RNVC: 2
10510323: RNCC: 5 | RNVC: 2
321748R1: RNCC: 5 | RNVC: 9
3820598: RNCC: 5 | RNVC: 9
3820598: RNCC: 5 | RNVC: 9

2 Oct 1968

5340-00-188-0328
Turnbuckle

001880328
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1G 1/4X4: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-118-6384
Loop Clamp

001186384
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R10: RNCC: 3 | RNVC: 2

18 Oct 1968

5340-00-190-6769
Retaining Strap

001906769
NASM760: RNCC: 3 | RNVC: 1
MS35140-19: RNCC: 3 | RNVC: 2
9322090: RNCC: 5 | RNVC: 1
1278: RNCC: 5 | RNVC: 1
MC200: RNCC: 5 | RNVC: 9
NASM35140-19: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9
PTMC200: RNCC: 5 | RNVC: 9
MS35140-19: RNCC: 5 | RNVC: 9
A55A5030: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-119-4706
Loop Clamp

001194706
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D8NH: RNCC: 3 | RNVC: 2
MS9352-07: RNCC: 5 | RNVC: 9

23 Oct 1968

5340-00-121-8787
Angle Bracket

001218787
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-486: RNCC: 3 | RNVC: 2
MS9601-486: RNCC: 5 | RNVC: 9

30 Oct 1968

5340-00-242-3468
Rod End Clevis

002423468
11619277: RNCC: 3 | RNVC: 2
5340002423468: RNCC: 6 | RNVC: 9
10473121: RNCC: 6 | RNVC: 9
5340PL2174404: RNCC: 6 | RNVC: 9

17 Mar 1971

5340-00-193-0096
Loop Clamp

001930096
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-2: RNCC: 3 | RNVC: 2
SAE AS7351A-2: RNCC: 5 | RNVC: 1
AN735-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-310-5724
Retaining Strap

003105724
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D13-24N: RNCC: 3 | RNVC: 2

26 Oct 1973

5340-00-193-0110
Loop Clamp

001930110
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-18: RNCC: 3 | RNVC: 2
21C2205-028: RNCC: 5 | RNVC: 1
8168924: RNCC: 5 | RNVC: 1
AN735-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-141-7210
Spring Tension Clip

001417210
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-056-04C: RNCC: 3 | RNVC: 2
4521-56-40-2C: RNCC: 5 | RNVC: 2

12 Jan 1973

5340-00-243-3251
Strap Hinge

002433251
BHMA-A156.20: RNCC: 3 | RNVC: 1
BHMA-A156.20 A81211 8IN: RNCC: 3 | RNVC: 2
SC803GBR: RNCC: 5 | RNVC: 9
FFH116CTYPE2203: RNCC: 5 | RNVC: 9
ANSI A156.20 A81211: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-143-6657
Helical Compression Spring Seat

001436657
69496C1: RNCC: 3 | RNVC: 9
QPL11275: RNCC: 4 | RNVC: 1
3-01AG26-8: RNCC: 5 | RNVC: 2
KEL2-27-1: RNCC: 5 | RNVC: 2
15890: RNCC: 5 | RNVC: 2
38884: RNCC: 5 | RNVC: 2
AG26: RNCC: 5 | RNVC: 2
69496C1: RNCC: 5 | RNVC: 9
4206: RNCC: 5 | RNVC: 9
609305: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-310-5332
Retaining Strap

013105332
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D14-26N: RNCC: 3 | RNVC: 2

7 Nov 1989

5340-00-104-7550
Loop Clamp

001047550
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F11: RNCC: 3 | RNVC: 2
MS25281F11: RNCC: 5 | RNVC: 9
5340001406524: RNCC: 5 | RNVC: 9
5340001406524: RNCC: 6 | RNVC: 9
MS25281-F11: RNCC: C | RNVC: 1
M25281-F11: RNCC: C | RNVC: 1

1 Jul 1968

5340-00-107-9207
Angle Bracket

001079207
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-007: RNCC: 3 | RNVC: 2
MS9592-007: RNCC: 3 | RNVC: 9
MS9592-007: RNCC: 5 | RNVC: 9

24 Dec 1972

5340-00-108-9871
Spring Tension Clip

001089871
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-101-12C: RNCC: 3 | RNVC: 2

29 Dec 1972

5340-00-111-1189
Angle Bracket

001111189
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-062: RNCC: 3 | RNVC: 2
MS9592-062: RNCC: 3 | RNVC: 9
MS9592-062: RNCC: 5 | RNVC: 9
5340PL0901518: RNCC: 6 | RNVC: 9

28 Aug 1968

5340-00-001-4749
Loop Clamp

000014749
MS21106-16: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
5340PL1524825: RNCC: 6 | RNVC: 9

29 Sep 1972

5340-00-054-1417
Expansion Plug

000541417
42687V: RNCC: 3 | RNVC: 2
PW238: RNCC: 3 | RNVC: 2
42687V: RNCC: 5 | RNVC: 9
111159: RNCC: 5 | RNVC: 9
PW238: RNCC: 5 | RNVC: 9
X2231: RNCC: 5 | RNVC: 9
X2231: RNCC: 5 | RNVC: 9
172599: RNCC: 5 | RNVC: 9
111159: RNCC: 5 | RNVC: 9
5340000541417: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-050-2757
Loop Clamp

000502757
NASM21322: RNCC: 3 | RNVC: 1
MS21322-45: RNCC: 3 | RNVC: 2
502757: RNCC: 5 | RNVC: 2
502757: RNCC: 5 | RNVC: 2
NASM21322-45: RNCC: 5 | RNVC: 9
MS21322-45: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-060-2124
Loop Clamp

000602124
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C12K: RNCC: 3 | RNVC: 2
NAS1715C12K: RNCC: 5 | RNVC: 2
GC12H12: RNCC: 5 | RNVC: 9
466SS12: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-068-0530
Rod End Clevis

000680530
MS21252-4RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-4RS: RNCC: 5 | RNVC: 1
MS21252-4RS: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-068-0532
Rod End Clevis

000680532
MS21252-5RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-5RL: RNCC: 5 | RNVC: 1
MS21252-5RL: RNCC: 5 | RNVC: 1
MS21252-5RL: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-068-0549
Rod End Clevis

000680549
MS21252-8RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-8RL: RNCC: 5 | RNVC: 1
MS21252-8RL: RNCC: 5 | RNVC: 1
MS21252-8RL: RNCC: 5 | RNVC: 2
NAS645-61RL: RNCC: 5 | RNVC: 9
AN161-80RL: RNCC: 5 | RNVC: 9
NAS645-80RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-0609
Rod End Connector

000690609
MS21254-8LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-067-3868
Loop Clamp

000673868
NASM21333: RNCC: 3 | RNVC: 1
MS21333-109: RNCC: 3 | RNVC: 2
573031: RNCC: 5 | RNVC: 1
13207E5500FN90: RNCC: 5 | RNVC: 1
MS21333-109: RNCC: 5 | RNVC: 9
5340000673868: RNCC: 5 | RNVC: 9
5340000673868: RNCC: 6 | RNVC: 9
5342PL0769334: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-080-9853
Loop Clamp

000809853
NASM21333: RNCC: 3 | RNVC: 1
MS21333-97: RNCC: 3 | RNVC: 2
5340000809853: RNCC: 5 | RNVC: 9
402350104: RNCC: 5 | RNVC: 9
MS21333-97: RNCC: 5 | RNVC: 9
5340000809853: RNCC: 6 | RNVC: 9
13207E2948FN36: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-081-6416
Loop Clamp

000816416
NASM21322: RNCC: 3 | RNVC: 1
MS21322-47: RNCC: 3 | RNVC: 2
MS21322-47: RNCC: 5 | RNVC: 9

15 Dec 1967

5340-01-266-0262
Spacing Threaded Standoff

012660262
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-3B06: RNCC: 3 | RNVC: 2

20 Oct 1987

5340-01-283-9293
Webbing Strap

012839293
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10BJ24: RNCC: 3 | RNVC: 2
NAS1212R10JB24: RNCC: 5 | RNVC: 2

15 Aug 1988

5340-01-275-3402
Angle Bracket

012753402
SAE-AS9599: RNCC: 3 | RNVC: 1
MS9599-216: RNCC: 3 | RNVC: 2
MS9599-216: RNCC: 5 | RNVC: 9

21 Mar 1988

5340-01-272-7819
Spring Tension Clip

012727819
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-065-08C: RNCC: 3 | RNVC: 2

13 Feb 1988

5340-01-301-6738
Plug Button

013016738
NAS451: RNCC: 3 | RNVC: 1
NAS-451-11: RNCC: 3 | RNVC: 2
NAS451-11: RNCC: 3 | RNVC: 2

2 Jun 1989

5340-01-304-2286
Electrical-Mechanical Equipment Post

013042286
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E32: RNCC: 3 | RNVC: 2

14 Jul 1989

5340-01-304-5387
Loop Clamp * Cushion

013045387
SAE-AS9392: RNCC: 3 | RNVC: 1
MS9392-07: RNCC: 3 | RNVC: 2
AS9392: RNCC: 5 | RNVC: 1
SAE AS9392: RNCC: 5 | RNVC: 9
MS9392-07: RNCC: 5 | RNVC: 9
AS9392: RNCC: 5 | RNVC: 9
MS9392-07: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-00-063-3774
Loop Clamp

000633774
MS9025-04: RNCC: 2 | RNVC: 1
MS9025: RNCC: 4 | RNVC: 1
113B3978P1: RNCC: 5 | RNVC: 1

27 Jun 1967

5340-00-093-8828
Threaded Rod End

000938828
AN490HT10P: RNCC: 3 | RNVC: 2
MIL-DTL-45918: RNCC: 4 | RNVC: 1
AN490HT10P: RNCC: 5 | RNVC: 9
AN490H10P: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-065-5153
Electrical-Mechanical Equipment Post

000655153
NAS1831: RNCC: 3 | RNVC: 1
NAS1831AC4B10: RNCC: 3 | RNVC: 2
8404: RNCC: 5 | RNVC: 2
8404: RNCC: 5 | RNVC: 9
8217A0440-1A: RNCC: 5 | RNVC: 9
8217A0440-1A: RNCC: C | RNVC: 1
8217-A-0440-17: RNCC: C | RNVC: 1

5 Jul 1967

5340-01-245-8514
Electrical-Mechanical Equipment Post

012458514
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E16: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-01-247-7064
Electrical-Mechanical Equipment Post

012477064
NAS1829: RNCC: 3 | RNVC: 1
NAS1829-3C11: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-01-247-7720
Electrical-Mechanical Equipment Post

012477720
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6G06: RNCC: 3 | RNVC: 2
SS-7502-832-12: RNCC: 5 | RNVC: 2
SC5340-0089-2: RNCC: E | RNVC: 8
9753SS0832-7: RNCC: E | RNVC: 8
519395-8: RNCC: E | RNVC: 8
9753-SS-0832-7: RNCC: E | RNVC: 8

12 Jan 1987

5340-01-276-4692
Angle Bracket

012764692
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-131: RNCC: 3 | RNVC: 2
MS9592-131: RNCC: 5 | RNVC: 9

9 Apr 1988

5340-01-249-0589
Turnbuckle

012490589
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 1X12: RNCC: 3 | RNVC: 2
ASTM F 1145-05 1.0X12: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9
FFT791TYPE1FORM1CLASS5-1X12: RNCC: 5 | RNVC: 9

5 Feb 1987

5340-00-061-1812
Aviation Turnbuckle Body

000611812
MS21251-B3L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21251-B3L: RNCC: 5 | RNVC: 1
21251-B3L: RNCC: 5 | RNVC: 1
2810695: RNCC: 5 | RNVC: 9
2810695: RNCC: 5 | RNVC: 9
2151-B3L: RNCC: 5 | RNVC: 9
1640PL2022177: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-088-1255
Loop Clamp

000881255
NASM21333: RNCC: 3 | RNVC: 1
MS21333-96: RNCC: 3 | RNVC: 2
MS21333-96: RNCC: 5 | RNVC: 9
5340000881255: RNCC: 5 | RNVC: 9
5340000881255: RNCC: 6 | RNVC: 9
5340PL0840847: RNCC: 6 | RNVC: 9
697-4C: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-691-0954
Retaining Strap

016910954
SAE-AS6495: RNCC: 3 | RNVC: 1
AS6495-28: RNCC: 3 | RNVC: 2

22 Sep 2020

5340-01-200-9902
Butt Hinge

012009902
MS20001-6-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
4240700-5: RNCC: 5 | RNVC: 1
MS20001-6-2700: RNCC: 5 | RNVC: 9
MS20001-6-4500: RNCC: 5 | RNVC: 9
MS20001-6-2927: RNCC: 5 | RNVC: 9
5340PL0858784: RNCC: 6 | RNVC: 9

11 Feb 1985

5340-01-217-2324
Dust And Moisture Seal Protective Cap

012172324
NAS832: RNCC: 3 | RNVC: 1
NAS832-7: RNCC: 3 | RNVC: 2
M5501/11-F8: RNCC: 5 | RNVC: 9
MIL-C-5501/11: RNCC: 5 | RNVC: 9
NAS832-3: RNCC: 5 | RNVC: 9
NAS847: RNCC: 5 | RNVC: 9

23 Sep 1985

5340-01-232-4252
Electrical-Mechanical Equipment Post

012324252
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B12: RNCC: 3 | RNVC: 2
B4031249-001: RNCC: C | RNVC: 1
10219857-9: RNCC: E | RNVC: 8

14 May 1986

5340-01-237-2904
Spacing Threaded Standoff

012372904
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C08: RNCC: 3 | RNVC: 2
7900749-05: RNCC: 5 | RNVC: 2
NAS1786C06-08: RNCC: C | RNVC: 1
NAS1786C06-8: RNCC: C | RNVC: 1
S07-6: RNCC: C | RNVC: 1

29 Jul 1986

5340-01-238-3768
Dust And Moisture Seal Protective Cap-Plug

012383768
NAS834: RNCC: 3 | RNVC: 1
NAS834-109: RNCC: 3 | RNVC: 2
MILC52078: RNCC: 5 | RNVC: 9
5340012383768: RNCC: 5 | RNVC: 9
5340012383768: RNCC: 6 | RNVC: 9

14 Aug 1986

5340-01-242-0941
Bow Handle

012420941
NASM39087: RNCC: 3 | RNVC: 1
MS39087-405CB: RNCC: 3 | RNVC: 2
MS39087-203CB: RNCC: 5 | RNVC: 9
MS39087-405CB: RNCC: 5 | RNVC: 9

6 Oct 1986

5340-01-243-4496
Electrical-Mechanical Equipment Post

012434496
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4B12: RNCC: 3 | RNVC: 2
1450D: RNCC: C | RNVC: 1
2373: RNCC: C | RNVC: 1
2373: RNCC: E | RNVC: 8
1450D: RNCC: E | RNVC: 8
2373: RNCC: E | RNVC: 8
10153866: RNCC: E | RNVC: 8

28 Oct 1986

5340-01-243-9656
Snap Hook

012439656
NASM43770/6: RNCC: 3 | RNVC: 1
M43770/6-MIZE1: RNCC: 3 | RNVC: 2
M43770/6-MIZE1: RNCC: 5 | RNVC: 9
MIL-S-43770/6: RNCC: 5 | RNVC: 9

5 Nov 1986

5340-01-690-5466
Loop Clamp

016905466
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-10S: RNCC: 3 | RNVC: 2

18 Aug 2020

5340-01-687-0250
Butt Hinge Leaf

016870250
MS20001PXA5-388: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

13 Mar 2020

5340-01-194-4511
Electrical-Mechanical Equipment Post

011944511
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C14: RNCC: 3 | RNVC: 2
ES3684-01C28A08: RNCC: 5 | RNVC: 9
NAS1786C06-14: RNCC: 5 | RNVC: 9

14 Nov 1984

5340-01-213-9668
Dust And Moisture Seal Protective Cap-Plug

012139668
NAS834: RNCC: 3 | RNVC: 1
NAS834-156: RNCC: 3 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F28: RNCC: 5 | RNVC: 9
GS10431&29: RNCC: E | RNVC: 8

4 Aug 1985

5340-01-195-5216
Loop Clamp

011955216
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-8K: RNCC: 3 | RNVC: 2
10112954: RNCC: 6 | RNVC: 9

30 Nov 1984

5340-01-207-3401
Electrical-Mechanical Equipment Post

012073401
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4C16: RNCC: 3 | RNVC: 2
152-0155-005: RNCC: 5 | RNVC: 9

30 Apr 1985

5340-01-207-3402
Electrical-Mechanical Equipment Post

012073402
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4C12: RNCC: 3 | RNVC: 2
3752-9529-12: RNCC: C | RNVC: 1

30 Apr 1985

5340-01-191-2150
Expansion Plug

011912150
SAE-AS3127: RNCC: 3 | RNVC: 1
AS3127-03: RNCC: 3 | RNVC: 2
AS3127-03: RNCC: 3 | RNVC: 9
PLGA1565020A: RNCC: 5 | RNVC: 2

7 Oct 1984

5340-01-193-7403
Electrical-Mechanical Equipment Post

011937403
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C20: RNCC: 3 | RNVC: 2

7 Nov 1984

5340-01-222-2433
Electrical-Mechanical Equipment Post

012222433
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B17: RNCC: 3 | RNVC: 2
NAS1786C04-17: RNCC: E | RNVC: 8
623-0729-001: RNCC: E | RNVC: 8
8087-SS-0440-7: RNCC: E | RNVC: 8
341128: RNCC: E | RNVC: 8

9 Dec 1985

5340-01-199-8251
Loop Clamp

011998251
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-21N: RNCC: 3 | RNVC: 2

25 Jan 1985

5340-01-212-4978
Dust And Moisture Seal Protective Cap

012124978
NAS835: RNCC: 3 | RNVC: 1
NAS835N3A: RNCC: 3 | RNVC: 2
MIL-C-5501/3: RNCC: 5 | RNVC: 9
M5501/3-3G: RNCC: 5 | RNVC: 9

12 Jul 1985

5340-01-209-4887
Angle Bracket

012094887
7-111412045: RNCC: 3 | RNVC: 2
7-11141205: RNCC: 5 | RNVC: 2
7-111412045: RNCC: 5 | RNVC: 9

31 May 1985

5340-01-201-9078
Electrical-Mechanical Equipment Post

012019078
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4G10: RNCC: 3 | RNVC: 2
ES3781-41C: RNCC: 5 | RNVC: 9
14H4-08-X10C: RNCC: C | RNVC: 1
532348-803: RNCC: C | RNVC: 1
9740SS0832-7: RNCC: C | RNVC: 1
164-07-SS-832: RNCC: C | RNVC: 1

23 Feb 1985

5340-01-197-3615
Loop Clamp

011973615
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-20: RNCC: 3 | RNVC: 2
1213E2672 FIND 7: RNCC: 5 | RNVC: 9
MS9349-20: RNCC: 5 | RNVC: 9

20 Dec 1984

5340-01-220-0644
Loop Clamp

012200644
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-14K: RNCC: 3 | RNVC: 2
10112984: RNCC: 6 | RNVC: 9

8 Nov 1985

5340-01-174-0651
Loop Clamp

011740651
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-7N: RNCC: 3 | RNVC: 2
ST9M633D12-7: RNCC: 5 | RNVC: 9
487D12-7: RNCC: 5 | RNVC: 9
TA519D12-7: RNCC: 5 | RNVC: 9
10112878: RNCC: 6 | RNVC: 9

14 Mar 1984

5340-01-180-6822
Electrical-Mechanical Equipment Post

011806822
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C08: RNCC: 3 | RNVC: 2
9728SS0440-7: RNCC: C | RNVC: 1
642AS2613-20: RNCC: C | RNVC: 1
9728-SS-0440-7: RNCC: C | RNVC: 1

31 May 1984

5340-01-181-1043
Quick Release Plunger

011811043
SSB-46P: RNCC: 3 | RNVC: 2
10001: RNCC: 5 | RNVC: 2
XN-1N: RNCC: 5 | RNVC: 2
13084331: RNCC: 5 | RNVC: 2
SSB46N: RNCC: 5 | RNVC: 9
B00: RNCC: 5 | RNVC: 9
13084331: RNCC: 5 | RNVC: 9
076-006356-001: RNCC: 7 | RNVC: 2
160613-001: RNCC: C | RNVC: 1
975308-1: RNCC: C | RNVC: 1

6 Jun 1984

5340-01-184-3684
Rod End Locking Retainer

011843684
NAS1193: RNCC: 3 | RNVC: 1
NAS1193E8CP: RNCC: 3 | RNVC: 2

18 Jul 1984

5340-01-189-9985
Butt Hinge

011899985
AA55590-16D: RNCC: 2 | RNVC: 2
A-A-55590-16D: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-16D: RNCC: 5 | RNVC: 9

21 Sep 1984

5340-01-132-4172
Spring Tension Clip

011324172
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-331: RNCC: 3 | RNVC: 2
M24066/2-331: RNCC: 5 | RNVC: 9
MS17160-31: RNCC: 5 | RNVC: 9

26 May 1982

5340-01-167-9877
Loop Clamp

011679877
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-5K: RNCC: 3 | RNVC: 2

9 Dec 1983

5340-01-155-4437
Angle Bracket

011554437
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-044: RNCC: 3 | RNVC: 2
MS9601-044: RNCC: 5 | RNVC: 9

9 Jun 1983

5340-01-132-8738
Loop Clamp

011328738
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-7N: RNCC: 3 | RNVC: 2
10112636: RNCC: 6 | RNVC: 9

5 Jun 1982

5340-01-168-0918
Loop Clamp

011680918
M85052/1-21: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
S664NB21: RNCC: 5 | RNVC: 1
1444PHW21Y: RNCC: 5 | RNVC: 1
TA026000121NB: RNCC: 5 | RNVC: 1
JM44LC70WPH21YN: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
9M972-21N: RNCC: C | RNVC: 1

12 Dec 1983

5340-01-131-5980
Loop Clamp

011315980
MS27405D6: RNCC: 2 | RNVC: 2
MS27405: RNCC: 4 | RNVC: 1

13 May 1982

5340-01-131-8577
Loop Clamp

011318577
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D20KWX: RNCC: 3 | RNVC: 2
5340PL0847669: RNCC: 6 | RNVC: 9
MS21122-20: RNCC: C | RNVC: 1

18 May 1982

5340-01-132-0601
Loop Clamp

011320601
M85052/1-9: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026000109NB: RNCC: 5 | RNVC: 1
S664NB9: RNCC: 5 | RNVC: 1
JM44LC70WPH9YN: RNCC: 5 | RNVC: 1
9M972-9N: RNCC: 5 | RNVC: 1
1444PHW9Y: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10112609: RNCC: 6 | RNVC: 9

22 May 1982

5340-01-129-7018
Loop Clamp

011297018
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D1028N: RNCC: 3 | RNVC: 2
NAS1712D10-28N: RNCC: 3 | RNVC: 2

9 Apr 1982

5340-01-607-6403
Retaining Strap

016076403
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D13W23N: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-01-064-3676
Clamping Catch

010643676
HC-83314-42-LK-SS: RNCC: 3 | RNVC: 9
260217-0001: RNCC: 5 | RNVC: 2
HC83314-42LKSS: RNCC: 5 | RNVC: 2
374756: RNCC: 5 | RNVC: 9
HC83314-42-LK-S S: RNCC: C | RNVC: 1
HC-83314-42-LK-SS: RNCC: C | RNVC: 1

23 Aug 1978

5340-01-120-9526
Dust And Moisture Seal Protective Plug

011209526
NAS847: RNCC: 3 | RNVC: 1
NAS842-24A: RNCC: 3 | RNVC: 2
M5501/2-24: RNCC: 5 | RNVC: 9
MIL-C-5501/2: RNCC: 5 | RNVC: 9
NAS842-24A: RNCC: 5 | RNVC: 9

27 Oct 1981

5340-01-125-9076
Loop Clamp

011259076
M85052/1-3: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
1444PHW3Y: RNCC: 5 | RNVC: 1
SS7563-3NBC: RNCC: 5 | RNVC: 1
TA026-0001-03NB: RNCC: 5 | RNVC: 1
JM44LC70WPH3YN: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10112489: RNCC: 6 | RNVC: 9

1 Feb 1982

5340-01-126-2041
Spring Tension Clip

011262041
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-306: RNCC: 3 | RNVC: 2
NAS1463: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-306: RNCC: 5 | RNVC: 9

6 Feb 1982

5340-01-160-2240
Access Cover

011602240
4M8239: RNCC: 3 | RNVC: 2
4M-8239: RNCC: 5 | RNVC: 2

19 Aug 1983

5340-01-155-7982
Butt Hinge

011557982
AA55594-16A: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
2AT842: RNCC: 5 | RNVC: 9
MS35829-16A: RNCC: 5 | RNVC: 9
AA55594-16: RNCC: 5 | RNVC: 9
A153926: RNCC: 5 | RNVC: 9
2AT842: RNCC: C | RNVC: 1

15 Jun 1983

5340-01-606-2318
Loop Clamp

016062318
SAE-AS23190: RNCC: 3 | RNVC: 1
DS14243-14PN: RNCC: 3 | RNVC: 2
AS14243-14PN: RNCC: 3 | RNVC: 9
AS14243-14PN: RNCC: 5 | RNVC: 9

14 May 2012

5340-01-607-6433
Retaining Strap

016076433
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D18W42N: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-01-414-1009
Retaining Strap

014141009
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D11-23S: RNCC: 3 | RNVC: 2

31 May 1995

5340-01-079-1606
Loop Clamp

010791606
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-18N: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-01-055-4204
Butt Hinge

010554204
AA55592-15A: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-15A: RNCC: 5 | RNVC: 1
MS35825-15A: RNCC: 5 | RNVC: 9

4 Feb 1978

5340-01-066-9654
Loop Clamp

010669654
AN742F14: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

21 Oct 1978

5340-01-015-1036
Angle Bracket

010151036
SAE-AS9594: RNCC: 3 | RNVC: 1
MS9594-306: RNCC: 3 | RNVC: 2
MS9594-306: RNCC: 5 | RNVC: 9

15 Jan 1976

5340-01-046-5888
Dust And Moisture Seal Protective Cap

010465888
SAE-AS85049/138: RNCC: 3 | RNVC: 1
M85049/138-57A: RNCC: 3 | RNVC: 2
AS85049/138-57A: RNCC: 3 | RNVC: 2
MS90376-28R: RNCC: 5 | RNVC: 2
MS90376-28R: RNCC: 5 | RNVC: 2
AS85049/138-57R: RNCC: 5 | RNVC: 9
MS90376-28R: RNCC: 5 | RNVC: 9
AS85049/138-57R: RNCC: 5 | RNVC: 9
064792-4: RNCC: 5 | RNVC: 9
MS90376-28R: RNCC: 5 | RNVC: 9

19 Aug 1977

5340-01-096-4299
Spring Tension Clip

010964299
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-117: RNCC: 3 | RNVC: 2
MIL-C-24066/4D: RNCC: 5 | RNVC: 9
M24066-4-117: RNCC: 5 | RNVC: 9
M24066/4-117: RNCC: C | RNVC: 1

18 Jun 1980

5340-01-033-3086
Retaining Strap

010333086
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-28N: RNCC: 3 | RNVC: 2

2 Jan 1977

5340-01-606-0750
Retaining Strap

016060750
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D21-32N: RNCC: 3 | RNVC: 2

7 May 2012

5340-01-054-4941
Butt Hinge

010544941
AA55590-12C: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-12C: RNCC: 5 | RNVC: 1
55590-12C: RNCC: 5 | RNVC: 9
MS35822-12C: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-01-078-4669
Retaining Strap

010784669
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C16-8S: RNCC: 3 | RNVC: 2
TA9C8SS16-8: RNCC: E | RNVC: 8
10111665-2: RNCC: E | RNVC: 8

13 Jun 1979

5340-01-043-6262
Retaining Strap

010436262
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C8-16S: RNCC: 3 | RNVC: 2

27 Jun 1977

5340-01-078-3504
Angle Bracket

010783504
SAE-AS9602: RNCC: 3 | RNVC: 1
MS9602-052: RNCC: 3 | RNVC: 2
MS9602-052: RNCC: 3 | RNVC: 9
MS9602-052: RNCC: 5 | RNVC: 9

11 Jun 1979

5340-01-012-2262
Loop Clamp

010122262
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C5SW: RNCC: 3 | RNVC: 2
NAS1715C5S: RNCC: C | RNVC: 1

9 Nov 1975

5340-00-842-0680
Loop Clamp

008420680
MS9025-02: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Jan 1962

5340-00-914-6690
Loop Clamp

009146690
NASM21322: RNCC: 3 | RNVC: 1
MS21322-46: RNCC: 3 | RNVC: 2
MS21322-46: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-772-2090
Synchro Clamp

007722090
214-1124P1: RNCC: 3 | RNVC: 2
109064-337: RNCC: 3 | RNVC: 2
215-013-0007: RNCC: 3 | RNVC: 2
7438952P0001: RNCC: 5 | RNVC: 2
214-1124P1: RNCC: 5 | RNVC: 2
215-013-0007: RNCC: 5 | RNVC: 2
11568705: RNCC: 5 | RNVC: 2
214-1124P1: RNCC: 5 | RNVC: 9
7438952P1: RNCC: 5 | RNVC: 9
1053609-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-953-3299
Sealing Plug Assembly

009533299
HS4100A3430: RNCC: 1 | RNVC: 2
69452A4: RNCC: 3 | RNVC: 2
343001: RNCC: 3 | RNVC: 2
ASNA3770D80-2: RNCC: 5 | RNVC: 2
PLGA3430010: RNCC: 5 | RNVC: 2
576R929H18: RNCC: 5 | RNVC: 2
3201-16295-0008: RNCC: 5 | RNVC: 2
ST7M141D11S: RNCC: 5 | RNVC: 2
STD288-25: RNCC: 5 | RNVC: 2
90060-18: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-00-952-3091
Bow Handle

009523091
9M215B0600-14: RNCC: 3 | RNVC: 2
9M215B0600-14: RNCC: 3 | RNVC: 2
9M215B0600-14: RNCC: 3 | RNVC: 2
9M215B0600-14: RNCC: 3 | RNVC: 2
B 1007-14: RNCC: 3 | RNVC: 2
25R5-10C096B3: RNCC: 3 | RNVC: 2
8112-6000-1032B11: RNCC: 3 | RNVC: 2
BR-3062-1032-14: RNCC: 5 | RNVC: 2
9M215B0600-14: RNCC: 5 | RNVC: 2
9M215B0600-14: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-965-7313
Spring Tension Clip

009657313
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-030-06C: RNCC: 3 | RNVC: 2
6009-186C: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-969-4420
Spring Tension Clip

009694420
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-024-02C: RNCC: 3 | RNVC: 2
6007-74C: RNCC: 5 | RNVC: 9

15 Jun 1966

5340-00-969-6407
Rod End Clevis

009696407
MS35812-1: RNCC: 3 | RNVC: 2
611982: RNCC: 5 | RNVC: 1
117824: RNCC: 5 | RNVC: 1
031-1: RNCC: 5 | RNVC: 1
T14728: RNCC: 5 | RNVC: 1
100912: RNCC: 5 | RNVC: 1
554757: RNCC: 5 | RNVC: 2
2708-1A: RNCC: 5 | RNVC: 9
100912: RNCC: 5 | RNVC: 9
60S2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-978-6063
Loop Clamp

009786063
NASM21334: RNCC: 3 | RNVC: 1
MS21334-30: RNCC: 3 | RNVC: 2
MS21334-30: RNCC: 5 | RNVC: 9
5340009786063: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-988-1162
Loop Clamp

009881162
NASM21333: RNCC: 3 | RNVC: 1
MS21333-113: RNCC: 3 | RNVC: 2
332-1459: RNCC: 5 | RNVC: 1
MS21333-113: RNCC: 5 | RNVC: 9
5340009881162: RNCC: 5 | RNVC: 9
5342PL0732915: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-01-053-7131
Butt Hinge

010537131
AA55591-7C: RNCC: 2 | RNVC: 2
A-A-55591: RNCC: 4 | RNVC: 1
AA55591-7C: RNCC: 5 | RNVC: 1
MS35823-7C: RNCC: 5 | RNVC: 9
MS35823-7C: RNCC: 5 | RNVC: 9

9 Jan 1978

5340-00-997-9003
Arched Cushion

009979003
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-04: RNCC: 3 | RNVC: 2
9682012519: RNCC: 5 | RNVC: 2
MS9393-04: RNCC: 5 | RNVC: 9
968.20.12.519: RNCC: 5 | RNVC: 9

14 Nov 1966

5340-01-024-1273
Dust And Moisture Seal Boot

010241273
L-638C2GS: RNCC: 3 | RNVC: 9
2AG402: RNCC: 5 | RNVC: 2
2AG402: RNCC: 5 | RNVC: 9
05582698: RNCC: 5 | RNVC: 9
MA268C-21005: RNCC: 5 | RNVC: 9
0-638C2: RNCC: 5 | RNVC: 9
638C2: RNCC: 5 | RNVC: 9
0-638C2: RNCC: 5 | RNVC: 9
L-638C2GS: RNCC: 5 | RNVC: 9
2945PL0362132: RNCC: 6 | RNVC: 9

6 Jul 1976

5340-00-984-8541
Loop Clamp

009848541
NASM21333: RNCC: 3 | RNVC: 1
MS21333-106: RNCC: 3 | RNVC: 2
MS21333-106: RNCC: 5 | RNVC: 2
5340009848541: RNCC: 5 | RNVC: 9
5342PL0715410: RNCC: 6 | RNVC: 9
5340009848541: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-990-3186
Strap Fastener Loop

009903186
NAS1382: RNCC: 3 | RNVC: 1
NAS1382-1: RNCC: 3 | RNVC: 2
34025-1: RNCC: 5 | RNVC: 2
34025-1: RNCC: 5 | RNVC: 9
34025-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-097-8445
Self-Locking Insert

010978445
M24560/13-011: RNCC: 2 | RNVC: 2
MIL-DTL-24560/13: RNCC: 4 | RNVC: 1
MS17290 PIECE 14: RNCC: 5 | RNVC: 9
MIL-L-24560/13: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-00-995-0597
Rod End Clevis

009950597
MS21253-3RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21253-3RL: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-004-9387
Antipilferage Seal

010049387
7701RED: RNCC: 3 | RNVC: 2
1001RED: RNCC: 3 | RNVC: 2
5340PL1046448: RNCC: 6 | RNVC: 9
POLY-LOK RED: RNCC: E | RNVC: 8

18 Jun 1975

5340-01-527-7206
Spacing Threaded Standoff

015277206
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C13A10: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-00-927-4324
Rod End Locking Retainer

009274324
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K36C: RNCC: 3 | RNVC: 2

12 Aug 1966

5340-00-693-4175
Retaining Clip

006934175
238288: RNCC: 3 | RNVC: 2
914302: RNCC: 3 | RNVC: 2
1273327: RNCC: 3 | RNVC: 2
7320711: RNCC: 3 | RNVC: 2
914302: RNCC: 5 | RNVC: 2
7525937: RNCC: 5 | RNVC: 2
642233: RNCC: 5 | RNVC: 2
238288: RNCC: 5 | RNVC: 2
614G4: RNCC: 5 | RNVC: 9
KC8751: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-928-9525
Support Hook

009289525
NAS622: RNCC: 3 | RNVC: 1
NAS622CE2: RNCC: 3 | RNVC: 2
10117505: RNCC: 6 | RNVC: 9
5340PL0846434: RNCC: 6 | RNVC: 9
935A262-1: RNCC: C | RNVC: 1

29 Aug 1966

5340-00-826-9804
Retaining Strap

008269804
760-24-2-12: RNCC: 3 | RNVC: 2
5340PL1959867: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-931-3119
Spring Tension Clip

009313119
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-204: RNCC: 3 | RNVC: 2
M24066/2-204: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-004: RNCC: 5 | RNVC: 9

19 Sep 1966

5340-00-900-4625
Spring Tension Clip

009004625
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-112-10C: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-809-4325
Plug Button

008094325
NAS451: RNCC: 3 | RNVC: 1
NAS451-53: RNCC: 3 | RNVC: 2
NAS-451-53: RNCC: 3 | RNVC: 2
BACP20B53: RNCC: 5 | RNVC: 2
HS4248-64A: RNCC: 5 | RNVC: 9
HS4248-64A: RNCC: 5 | RNVC: 9
SS48166: RNCC: 5 | RNVC: 9
BACP20B53B: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-901-1320
Loop Clamp

009011320
MS21322-34: RNCC: 2 | RNVC: 2
NASM21322: RNCC: 3 | RNVC: 1
MS21322-34: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-874-4063
Aircraft Floor Tie Down Adapter

008744063
NAS1211: RNCC: 3 | RNVC: 1
NAS1211-B15: RNCC: 3 | RNVC: 2
NAS1211B15: RNCC: 3 | RNVC: 2
NAS1211-B15: RNCC: 3 | RNVC: 2
NAS1211B15: RNCC: 5 | RNVC: 2
NAS1211-B15: RNCC: 5 | RNVC: 9
123130: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-912-5389
Spring Tension Clip

009125389
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-038-10C: RNCC: 3 | RNVC: 2

29 Jun 1966

5340-00-815-9068
Angle Bracket

008159068
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743B12: RNCC: 3 | RNVC: 2
AN743B12: RNCC: 3 | RNVC: 9
AN743B12: RNCC: 5 | RNVC: 9
AS7431: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-837-9408
Dust And Moisture Seal Protective Cap

008379408
AS90376-A1-14R: RNCC: 3 | RNVC: 2
AS90376-A1-14R: RNCC: 3 | RNVC: 9
EC-14: RNCC: 5 | RNVC: 2
MS90376-14R: RNCC: 5 | RNVC: 2
MS90376-14R: RNCC: 5 | RNVC: 2
MS90376-14R: RNCC: 5 | RNVC: 2
MS90376-14R: RNCC: 5 | RNVC: 2
MS90376-14R: RNCC: 5 | RNVC: 2
EC14: RNCC: 5 | RNVC: 9
36B505139P4: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-794-4612
Door Handle

007944612
SMC113597: RNCC: 3 | RNVC: 2
SM-C-113597: RNCC: 3 | RNVC: 2
COH-67765: RNCC: 5 | RNVC: 1
SMC113597: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-00-880-6236
Arched Cushion

008806236
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-02: RNCC: 3 | RNVC: 2
AS9393-02: RNCC: 3 | RNVC: 9
MS9393-02: RNCC: 5 | RNVC: 9
AS9393-02: RNCC: 5 | RNVC: 9

8 Nov 1967

5340-00-942-2202
Loop Clamp

009422202
SAE-AS9391: RNCC: 3 | RNVC: 1
MS9391-09: RNCC: 3 | RNVC: 2
MS9391-09: RNCC: 5 | RNVC: 1
MS9391-09: RNCC: 5 | RNVC: 9
5340009422202: RNCC: 5 | RNVC: 9

25 Dec 1965

5340-00-710-3784
Synchro Clamp

007103784
41417-1: RNCC: 1 | RNVC: 2
74B059139-201: RNCC: 3 | RNVC: 2
1005448: RNCC: 3 | RNVC: 2
205-951-10: RNCC: 3 | RNVC: 2
16600496-001: RNCC: 3 | RNVC: 2
918337-7: RNCC: 3 | RNVC: 2
9147C5010: RNCC: 3 | RNVC: 2
330120P01: RNCC: 3 | RNVC: 2
SM-B-890089: RNCC: 3 | RNVC: 2
271167: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-913-5301
Friction Catch

009135301
A156.9 B03072: RNCC: 3 | RNVC: 1
B03072: RNCC: 3 | RNVC: 2
BP9714-2G: RNCC: 3 | RNVC: 9
B3BP9714-2G: RNCC: 5 | RNVC: 9
35: RNCC: 5 | RNVC: 9
FFH111: RNCC: 5 | RNVC: 9
B0307: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-597-9519
Loop Clamp

005979519
MS9024-06: RNCC: 2 | RNVC: 2
MS9024: RNCC: 4 | RNVC: 1
5340005979519: RNCC: 5 | RNVC: 9
5342PL0965816: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-880-6597
Angle Bracket

008806597
MS9165-04: RNCC: 2 | RNVC: 2
MS9165: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-663-1477
Butt Hinge

006631477
BHMA-A156.20: RNCC: 3 | RNVC: 1
BHMA-A156.20 A81313 1-1/4IN: RNCC: 3 | RNVC: 2
FFH116: RNCC: 4 | RNVC: 1
ANSI A156.20 A8133: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-883-6547
Angle Bracket

008836547
MS9167-21: RNCC: 2 | RNVC: 2
MS9167: RNCC: 4 | RNVC: 1

1 Jan 1962

5340-00-885-7812
Rigid Caster

008857812
481216-1: RNCC: 3 | RNVC: 2
527-2: RNCC: 5 | RNVC: 9
481216-1: RNCC: 7 | RNVC: 2
9389: RNCC: E | RNVC: 8

1 Jan 1962

5340-00-720-6213
Loop Clamp

007206213
NASM21333: RNCC: 3 | RNVC: 1
MS21333-59: RNCC: 3 | RNVC: 2
47746: RNCC: 5 | RNVC: 1
140582: RNCC: 5 | RNVC: 1
MS21333-59: RNCC: 5 | RNVC: 9
1DD956: RNCC: 5 | RNVC: 9
5340007206213: RNCC: 5 | RNVC: 9
53407206213: RNCC: 5 | RNVC: 9
62256: RNCC: 5 | RNVC: 9
4B418: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-821-7813
Dust And Moisture Seal Protective Cap

008217813
025-0468-000: RNCC: 3 | RNVC: 2
PC814500000F5: RNCC: 5 | RNVC: 2
025-0468-000: RNCC: 5 | RNVC: 2
70086864: RNCC: 5 | RNVC: 2
43381-20: RNCC: 5 | RNVC: 9
SB9044-14: RNCC: 5 | RNVC: 9
833935-00: RNCC: 5 | RNVC: 9
PC814500000F5: RNCC: 5 | RNVC: 9
025-468-00: RNCC: 5 | RNVC: 9
2061K72P014: RNCC: 7 | RNVC: 2

1 Jan 1962

5340-00-720-8073
Swivel Caster

007208073
A-A-55619-8SULE: RNCC: 2 | RNVC: 2
AA55619-8SULE: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1
MILC7474: RNCC: 5 | RNVC: 9
MS24380-8SULE: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-0788
Dust And Moisture Seal Protective Cap

008040788
NAS835: RNCC: 3 | RNVC: 1
NAS835-20A: RNCC: 3 | RNVC: 2
NAS817-20: RNCC: 5 | RNVC: 9
MILC5501TYPE2CLASSASIZE20: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-922-3380
Loop Clamp

009223380
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C24KH: RNCC: 3 | RNVC: 2
MS9350-23: RNCC: 5 | RNVC: 9
10392527: RNCC: 6 | RNVC: 9
5340009223380: RNCC: 6 | RNVC: 9

24 Apr 1968

5340-00-822-6114
Angle Bracket

008226114
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743BZ13: RNCC: 3 | RNVC: 2
AN743BZ13: RNCC: 5 | RNVC: 9
10117470: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-069-0610
Rod End Connector

000690610
MS21254-8RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-480-9933
Retaining Strap

004809933
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16W42N: RNCC: 3 | RNVC: 2
10117372: RNCC: 6 | RNVC: 9
NAS1677D16-42N: RNCC: C | RNVC: 1

14 Jun 1974

5340-00-480-8962
Loop Clamp

004808962
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-14N: RNCC: 3 | RNVC: 2
10117369: RNCC: 6 | RNVC: 9

14 Jun 1974

5340-00-486-5260
Electrical-Mechanical Equipment Post

004865260
1317-M09-F09-440: RNCC: 3 | RNVC: 2
247ASC0811-003: RNCC: 5 | RNVC: 2
G247-038-002: RNCC: 5 | RNVC: 9
SS-7207-440-0: RNCC: 5 | RNVC: 9
9730SS0440-0: RNCC: 5 | RNVC: 9
9730SS0440-7: RNCC: 5 | RNVC: 9
9730SS0440-0: RNCC: 5 | RNVC: 9
9730SS0440-7: RNCC: 5 | RNVC: 9
4507-440-SS-0: RNCC: 5 | RNVC: 9
G247-038-002: RNCC: 5 | RNVC: 9

6 Jun 1969

5340-00-491-7705
Strap Fastener Loop

004917705
NAS1382: RNCC: 3 | RNVC: 1
NAS1382-2: RNCC: 3 | RNVC: 2
34031-18: RNCC: 5 | RNVC: 2

23 Sep 1970

5340-00-484-0057
Loop Clamp

004840057
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-24N: RNCC: 3 | RNVC: 2
10117373: RNCC: 6 | RNVC: 9

18 Jun 1974

5340-00-514-3009
Loop Clamp

005143009
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D43: RNCC: 3 | RNVC: 2
AN735D43: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-514-0014
Loop Clamp

005140014
AN742-24: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
742D16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-922-1716
Retaining Strap

009221716
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10W12N: RNCC: 3 | RNVC: 2
TA4C87WD10-12: RNCC: 5 | RNVC: 2

19 May 1972

5340-00-435-9371
Turnbuckle Body

004359371
MS21251A5L: RNCC: 2 | RNVC: 2
MS21251-A5L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
21251-A5L: RNCC: 5 | RNVC: 1
MS21251-A5L: RNCC: 5 | RNVC: 1

26 Mar 1969

5340-00-103-2869
Loop Clamp

001032869
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-12N: RNCC: 3 | RNVC: 2
10117247: RNCC: 6 | RNVC: 9
8099A7-12: RNCC: C | RNVC: 1
TA519D7-12: RNCC: C | RNVC: 1
GC500F7-12: RNCC: C | RNVC: 1
TA519WD7-12: RNCC: E | RNVC: 8
487WD7-12: RNCC: E | RNVC: 8
ST9M633WD7-12: RNCC: E | RNVC: 8

12 Jun 1968

5340-00-186-3391
Loop Clamp

001863391
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D29: RNCC: 3 | RNVC: 2
AS5587D29: RNCC: 3 | RNVC: 9
AN742D29: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-103-2875
Loop Clamp

001032875
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-16N: RNCC: 3 | RNVC: 2
GC500F8-16: RNCC: 5 | RNVC: 2
TA519D8-16: RNCC: 5 | RNVC: 2
8099A8-16DG: RNCC: 5 | RNVC: 9
10117248: RNCC: 6 | RNVC: 9

12 Jun 1968

5340-00-057-3026
Loop Clamp

000573026
NASM21333: RNCC: 3 | RNVC: 1
MS21333-117: RNCC: 3 | RNVC: 2
NASM21333-117: RNCC: 5 | RNVC: 9
CMDX2-3PT573026: RNCC: 5 | RNVC: 9
MS21333-117: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-103-2876
Loop Clamp

001032876
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D20-20N: RNCC: 3 | RNVC: 2
TA519D20-20: RNCC: 5 | RNVC: 2
GC500F20-20: RNCC: 5 | RNVC: 2
8099A20-20DG: RNCC: 5 | RNVC: 9

12 Jun 1968

5340-00-186-3389
Loop Clamp

001863389
MS21103D8: RNCC: 2 | RNVC: 2
MS21103: RNCC: 4 | RNVC: 1
759-8: RNCC: 5 | RNVC: 1
AN742D8: RNCC: 5 | RNVC: 1
C8603ANDTYPE1ANDCLASSA: RNCC: 5 | RNVC: 9
5340001863389: RNCC: 5 | RNVC: 9
10117278: RNCC: 6 | RNVC: 9
5340PL0727323: RNCC: 6 | RNVC: 9
5340PL1731414: RNCC: 6 | RNVC: 9
5340001863389: RNCC: 6 | RNVC: 9

1 Jan 1961

5340-00-438-6713
Spring Tension Clip

004386713
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B034-08C: RNCC: 3 | RNVC: 2
NAS1464B034-08T: RNCC: C | RNVC: 1

18 Feb 1972

5340-00-143-0508
Webbing Strap

001430508
NAS1213: RNCC: 3 | RNVC: 1
NAS1213P15J144: RNCC: 3 | RNVC: 2
FDC4513P15J144: RNCC: 5 | RNVC: 2
5340PL0849481: RNCC: 6 | RNVC: 9

16 Oct 1968

5340-00-203-1090
Buckle

002031090
NAS1284: RNCC: 3 | RNVC: 1
NAS1284A16: RNCC: 3 | RNVC: 2

11 Jan 1968

5340-00-434-9596
Loop Clamp

004349596
MS21122C6: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
LS7357WSST6: RNCC: 5 | RNVC: 1
5340PL0648723: RNCC: 6 | RNVC: 9
JM43LC3SS6X: RNCC: C | RNVC: 1

18 Feb 1972

5340-00-205-5223
Clamping Catch

002055223
HC207-20649ZE/HS211ZE: RNCC: 3 | RNVC: 2
HC207-20649ZE/HS211ZE: RNCC: 3 | RNVC: 9
147412-1: RNCC: 5 | RNVC: 9
SCD20649ZE/HS211ZE: RNCC: 5 | RNVC: 9
15804: RNCC: 5 | RNVC: 9
608-5795050 ITEM 6: RNCC: 5 | RNVC: 9
15801-10: RNCC: 5 | RNVC: 9
147412-3: RNCC: 5 | RNVC: 9
8093599: RNCC: 5 | RNVC: 9
608-5795050 #6: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-205-5703
Rod End Clevis

002055703
AN665-80RA: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-257-0048
Loop Clamp

002570048
CPC742-16: RNCC: 3 | RNVC: 2
742-16: RNCC: 3 | RNVC: 2
CP742-16: RNCC: 3 | RNVC: 2
8922: RNCC: 5 | RNVC: 9
12-516: RNCC: 5 | RNVC: 9
8992: RNCC: C | RNVC: 1
8922: RNCC: C | RNVC: 1
843: RNCC: E | RNVC: 8
843: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-400-2584
Expansion Plug

004002584
SAE-AS9380: RNCC: 3 | RNVC: 1
MS9380-10: RNCC: 3 | RNVC: 2
577729: RNCC: 5 | RNVC: 1
MS9380-10: RNCC: 5 | RNVC: 9
10117353: RNCC: 6 | RNVC: 9
5340004002584: RNCC: 6 | RNVC: 9

7 Mar 1969

5340-00-186-3419
Loop Clamp

001863419
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D13: RNCC: 3 | RNVC: 2
AS5587D13: RNCC: 3 | RNVC: 9
AN742D13: RNCC: 5 | RNVC: 9
10117280: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-267-9695
Rod End Clevis

002679695
MS21252-10RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-10RL: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-059-4910
Loop Clamp

000594910
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P7EB: RNCC: 3 | RNVC: 2
NAS1397P7B: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-147-6149
Angle Bracket

001476149
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-010: RNCC: 3 | RNVC: 2
MS9601-010: RNCC: 5 | RNVC: 9
MS9229-10: RNCC: E | RNVC: 8

1 Oct 1971

5340-00-300-1981
Loop Clamp

003001981
MS21103-46: RNCC: 2 | RNVC: 2
MS21103: RNCC: 4 | RNVC: 1
AN742F46: RNCC: C | RNVC: 1

6 Oct 1973

5340-00-061-8244
Loop Clamp

000618244
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P11N: RNCC: 3 | RNVC: 2
5340PL0975454: RNCC: 6 | RNVC: 9

22 Jun 1967

5340-00-229-4246
Butt Hinge

002294246
MS27956-50: RNCC: 2 | RNVC: 2
MS27956: RNCC: 4 | RNVC: 1
MILH1237ATYPE2CLASS3: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-369-4943
Butt Hinge

003694943
MS27964-2: RNCC: 2 | RNVC: 2
1490-1-4: RNCC: 5 | RNVC: 1
BHMA A156.1: RNCC: 5 | RNVC: 1
1490-1-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-229-4324
Butt Hinge

002294324
MS27958-34: RNCC: 2 | RNVC: 2
MS27958: RNCC: 4 | RNVC: 1
3305: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-230-1830
Turnbuckle

002301830
NAS1047: RNCC: 3 | RNVC: 1
NAS1047-10P060: RNCC: 3 | RNVC: 2

12 Mar 1971

5340-00-304-7393
Loop Clamp

003047393
185502: RNCC: 3 | RNVC: 2
X22: RNCC: 3 | RNVC: 2
6624: RNCC: 3 | RNVC: 2
3857547: RNCC: 3 | RNVC: 2
X225: RNCC: 3 | RNVC: 2
06437AB: RNCC: 5 | RNVC: 2
CCLMAPA1: RNCC: 5 | RNVC: 9
3857547: RNCC: 5 | RNVC: 9
50A943: RNCC: 5 | RNVC: 9
4078: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-410-6424
Webbing Strap

004106424
NAS1383: RNCC: 3 | RNVC: 1
NAS1383H42L84T: RNCC: 3 | RNVC: 2

20 Aug 1969

5340-00-443-2532
Turnbuckle Body

004432532
MS21251-A3L: RNCC: 2 | RNVC: 2
MS21251A3L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21251-A3L: RNCC: 5 | RNVC: 1
21251-A3L: RNCC: 5 | RNVC: 1

9 Apr 1969

5340-00-411-9859
Turnbuckle Body

004119859
MS21251-A2S: RNCC: 2 | RNVC: 2
MS21251A2S: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
5340PL1510877: RNCC: 6 | RNVC: 9

1 May 1970

5340-00-064-6088
Nut And Bolt Retainer

000646088
NAS578: RNCC: 3 | RNVC: 1
NAS578-10B: RNCC: 3 | RNVC: 2
SLR50-10B: RNCC: 5 | RNVC: 2
3320-108RET: RNCC: 5 | RNVC: 9
10437735: RNCC: 6 | RNVC: 9
NAS578-108: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-443-5926
Loop Clamp

004435926
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D9-16N: RNCC: 3 | RNVC: 2

11 Apr 1969

5340-00-068-2018
Rod End Clevis

000682018
MS21253-5RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21253-5RS: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-470-8023
Nut And Bolt Retainer

004708023
SLR408-8B: RNCC: 3 | RNVC: 2
C645-080: RNCC: 5 | RNVC: 1
5340PL2042212: RNCC: 6 | RNVC: 9

30 Jan 1970

5340-00-069-0603
Rod End Connector

000690603
MS21254-5LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
2802745: RNCC: 5 | RNVC: 2
2802745: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-119-7515
Angle Bracket

001197515
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-130: RNCC: 3 | RNVC: 2
MS9593-130: RNCC: 3 | RNVC: 9
MS9593-130: RNCC: 5 | RNVC: 9

4 Jan 1973

5340-00-057-3029
Loop Clamp

000573029
NASM21333: RNCC: 3 | RNVC: 1
MS21333-118: RNCC: 3 | RNVC: 2
CMDX2-3PT573029: RNCC: 5 | RNVC: 1
MS21333-118: RNCC: 5 | RNVC: 9
5340000573029: RNCC: 5 | RNVC: 9
5340000573029: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-200-3033
Loop Clamp

002003033
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-11: RNCC: 3 | RNVC: 2
AN735-11: RNCC: 3 | RNVC: 9
AN735-11: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-128-2025
Retaining Strap

001282025
MS63044-2: RNCC: 2 | RNVC: 2
MS63044: RNCC: 4 | RNVC: 1

6 Dec 1968

5340-00-413-4799
Spring Tension Clip

004134799
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-042-08C: RNCC: 3 | RNVC: 2

8 May 1970

5340-00-282-7509
Loop Clamp

002827509
NASM21333: RNCC: 3 | RNVC: 1
MS21333-62: RNCC: 3 | RNVC: 2
8917605: RNCC: 5 | RNVC: 1
8917605: RNCC: 5 | RNVC: 9
5340002827509: RNCC: 5 | RNVC: 9
MS21333-62: RNCC: 5 | RNVC: 9
5340002827509: RNCC: 6 | RNVC: 9
5151189: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-282-7517
Loop Clamp

002827517
NASM21333: RNCC: 3 | RNVC: 1
MS21333-42: RNCC: 3 | RNVC: 2
MS21333-42: RNCC: 5 | RNVC: 9
5340002827517: RNCC: 5 | RNVC: 9
5340PL0820706: RNCC: 6 | RNVC: 9
5340002827517: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-197-0676
Loop Clamp

001970676
AN742-48: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-418-8133
Mending Plate

004188133
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-145: RNCC: 3 | RNVC: 2
AS9552-145: RNCC: 3 | RNVC: 9
MS9552-145: RNCC: 5 | RNVC: 9
AS9552-145: RNCC: 5 | RNVC: 9
5340PL0713225: RNCC: 6 | RNVC: 9

23 Nov 1970

5340-00-282-7526
Loop Clamp

002827526
NASM21333: RNCC: 3 | RNVC: 1
MS21333-64: RNCC: 3 | RNVC: 2
MS21333-64: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-050-1569
Expansion Plug

000501569
140802: RNCC: 3 | RNVC: 2
4780A: RNCC: 3 | RNVC: 2
140802: RNCC: 3 | RNVC: 2
14082: RNCC: 3 | RNVC: 2
140802: RNCC: 5 | RNVC: 2
501569: RNCC: 5 | RNVC: 2
BEDX1DA: RNCC: 5 | RNVC: 2
140802: RNCC: 5 | RNVC: 9
4780A: RNCC: 5 | RNVC: 9
140802: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-200-3020
Loop Clamp

002003020
AN742-12: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
69810-12: RNCC: 5 | RNVC: 1
S127057-12: RNCC: 5 | RNVC: 9
C8603ANDTYPE1ANDCLASSB: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-163-9768
Angle Bracket

001639768
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-054: RNCC: 3 | RNVC: 2
MS9592-054: RNCC: 5 | RNVC: 9
5340PL1674462: RNCC: 6 | RNVC: 9

7 Feb 1973

5340-00-050-1589
Expansion Plug

000501589
MS35648-3: RNCC: 2 | RNVC: 2
MIL-P-20691: RNCC: 4 | RNVC: 1
910333: RNCC: 5 | RNVC: 1
1948694: RNCC: 5 | RNVC: 1
501589: RNCC: 5 | RNVC: 1
541428: RNCC: 5 | RNVC: 1
0910333: RNCC: 5 | RNVC: 1
0910333-4: RNCC: 5 | RNVC: 1
1948694: RNCC: 5 | RNVC: 9
71191: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-390-0573
Loop Clamp

003900573
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C9KWX: RNCC: 3 | RNVC: 2
TA1718SS9T: RNCC: 5 | RNVC: 1
MS21122C9: RNCC: 5 | RNVC: 2
LS7357SST9: RNCC: 5 | RNVC: 2
LS7357SST9: RNCC: 5 | RNVC: 9
NAS1715C9T: RNCC: C | RNVC: 1
5047-9G: RNCC: C | RNVC: 1

28 Mar 1974

5340-00-286-3507
Dust And Moisture Seal Protective Cap-Plug

002863507
NAS834: RNCC: 3 | RNVC: 1
NAS834-151: RNCC: 3 | RNVC: 2
NAS847: RNCC: 5 | RNVC: 2
194: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
17S: RNCC: 5 | RNVC: 9
44Z992-D14: RNCC: 5 | RNVC: 9
M5501/7-F33: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-199-2158
Cradle

001992158
TC141: RNCC: 3 | RNVC: 2
TC141: RNCC: 5 | RNVC: 1
TC141: RNCC: 5 | RNVC: 1
TC141: RNCC: 5 | RNVC: 2
91374841: RNCC: 5 | RNVC: 2
W4631782B1: RNCC: 5 | RNVC: 2
91374841: RNCC: 5 | RNVC: 2
TC141: RNCC: 5 | RNVC: 2
5800583-096200-003: RNCC: 5 | RNVC: 2
C42195Z47C904: RNCC: 5 | RNVC: 2

24 Jan 1969

5340-00-082-1785
Buckle

000821785
NAS1284: RNCC: 3 | RNVC: 1
NAS1284A12: RNCC: 3 | RNVC: 2

24 Dec 1967

5340-00-057-2891
Loop Clamp

000572891
NASM21333: RNCC: 3 | RNVC: 1
MS21333-4: RNCC: 3 | RNVC: 2
MS21333-4: RNCC: 5 | RNVC: 9
5340000572891: RNCC: 5 | RNVC: 9
5340000572891: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-165-7671
Loop Clamp

001657671
AS21919WCJ13: RNCC: 2 | RNVC: 2
MS21919WCJ13: RNCC: 5 | RNVC: 1
SAE-AS21919: RNCC: 5 | RNVC: 1
MS21919WCJ13: RNCC: 5 | RNVC: 9
MS21105-13: RNCC: 5 | RNVC: 9
10117269: RNCC: 6 | RNVC: 9
5340PL1356310: RNCC: 6 | RNVC: 9

20 Jan 1972

NSN 5340-00-286-4146 002864146 PLUG,PROTECTIVE,DUST AND MOISTURE SEAL

5340-00-286-4146
Dust And Moisture Seal Protective Plug

002864146
M5501/1-R6: RNCC: 2 | RNVC: 2
MIL-C-5501/1: RNCC: 4 | RNVC: 1
MILC5501: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-170-1703
Angle Bracket

001701703
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-010: RNCC: 3 | RNVC: 2
MS9593-010: RNCC: 5 | RNVC: 9

14 Feb 1973

5340-00-349-1020
Loop Clamp

003491020
NAS1715: RNCC: 3 | RNVC: 1
NAS1715DT4T: RNCC: 3 | RNVC: 2

30 Jan 1974

5340-00-286-9416
Loop Clamp

002869416
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF24: RNCC: 3 | RNVC: 2
AS21919WDF24: RNCC: 3 | RNVC: 9
99265302: RNCC: 5 | RNVC: 2
MS21919WDF24: RNCC: 5 | RNVC: 9
10117313: RNCC: 6 | RNVC: 9
5340PL0729455: RNCC: 6 | RNVC: 9
5340PL1935852: RNCC: 6 | RNVC: 9
MS21919DG24: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-547-4673
Angle Bracket

015474673
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-245: RNCC: 3 | RNVC: 2
MS9593-245: RNCC: 3 | RNVC: 9
MS9593-245: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-00-919-5180
Spring Tension Clip

009195180
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-016: RNCC: 3 | RNVC: 2
MIL-C-24066/4: RNCC: 5 | RNVC: 9
M24066/4-016: RNCC: 5 | RNVC: 9
MS28137-116: RNCC: 5 | RNVC: 9
6019-93C: RNCC: 5 | RNVC: 9

12 Aug 1966

5340-00-193-0095
Loop Clamp

001930095
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D32: RNCC: 3 | RNVC: 2
AN735D32: RNCC: 5 | RNVC: 9
5342PL0196422: RNCC: 6 | RNVC: 9
10086638: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-020-3123
Snap Hook

000203123
NAS1282: RNCC: 3 | RNVC: 1
NAS1282C8: RNCC: 3 | RNVC: 2
3400847-11: RNCC: 5 | RNVC: 9

29 Apr 1967

5340-00-108-9882
Spring Tension Clip

001089882
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B026-02C: RNCC: 3 | RNVC: 2

29 Dec 1972

5340-00-193-0108
Loop Clamp

001930108
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-16: RNCC: 3 | RNVC: 2
21C2207-161: RNCC: 5 | RNVC: 1
AN735-16: RNCC: 5 | RNVC: 9
AN735-16: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-270-8535
Plug Button

002708535
NAS451: RNCC: 3 | RNVC: 1
NAS-451-35: RNCC: 3 | RNVC: 2
NAS451-35: RNCC: 3 | RNVC: 2
48175: RNCC: 3 | RNVC: 9
99051-431: RNCC: 5 | RNVC: 9
50MS590: RNCC: 5 | RNVC: 9
99051-431: RNCC: 5 | RNVC: 9
50MS590: RNCC: 5 | RNVC: 9
SS48175: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-011-0237
Electrical-Mechanical Equipment Post

000110237
6-40683-1: RNCC: 3 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2
6-40683-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-013-7816
Spring Tension Clip

000137816
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-059-04C: RNCC: 3 | RNVC: 2

10 May 1968

5340-00-193-0120
Loop Clamp

001930120
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D48: RNCC: 3 | RNVC: 2
AN735D48: RNCC: 3 | RNVC: 9
127057-48: RNCC: 5 | RNVC: 9
AN735D48: RNCC: 5 | RNVC: 9
5340001930120: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-234-8424
Hinged Hasp

002348424
MS27965-14: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
21C1536-164: RNCC: 5 | RNVC: 1
8851038: RNCC: 5 | RNVC: 1
8823563: RNCC: 5 | RNVC: 1
917KBPS1ZE3 1-2: RNCC: 5 | RNVC: 9
SC915RBP31-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-280-2228
Dust And Moisture Seal Protective Cap-Plug

002802228
231784-10: RNCC: 3 | RNVC: 2
47067-7: RNCC: 3 | RNVC: 2
8034538-3: RNCC: 3 | RNVC: 2
732249-28: RNCC: 3 | RNVC: 2
025-0501-000: RNCC: 3 | RNVC: 2
10-70500-28: RNCC: 3 | RNVC: 2
8783147: RNCC: 5 | RNVC: 2
9254422: RNCC: 5 | RNVC: 2
8799475: RNCC: 5 | RNVC: 2
PC814500000F7: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-413-6527
Mortise Lock Set

004136527
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F81 GRADE 1: RNCC: 3 | RNVC: 2
FFH106: RNCC: 5 | RNVC: 9
ANSI A156.2 F81 GRADE 1: RNCC: 5 | RNVC: 9
D51PDN0V0-28: RNCC: 5 | RNVC: 9
D151PD: RNCC: 5 | RNVC: 9
D51PD26D: RNCC: 5 | RNVC: 9
E532DL: RNCC: C | RNVC: 1

8 May 1970

5340-01-700-7594
Nut And Bolt Head Protective Cap

017007594
397D524-11: RNCC: 3 | RNVC: 2

12 Apr 2022

5340-01-536-4686
Loop Clamp

015364686
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-4SW: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-01-534-0693
Retaining Strap

015340693
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C37-12NX: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-01-543-4524
Retaining Strap

015434524
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-38N: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-01-543-5064
Loop Clamp

015435064
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D23-14N: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-01-533-3184
Retaining Strap

015333184
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C48-12NX: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-01-543-3987
Loop Clamp

015433987
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-3NW: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-01-667-1224
Dust And Moisture Seal Protective Cap

016671224
1026086-001: RNCC: 3 | RNVC: 2
8003731: RNCC: 5 | RNVC: 2

4 Oct 2017

5340-01-541-1540
Spacing Threaded Standoff

015411540
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C64: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-01-568-8988
Spacing Threaded Standoff

015688988
NAS1831: RNCC: 3 | RNVC: 1
NAS1831AC3B16: RNCC: 3 | RNVC: 2
MAS1831AC3B16: RNCC: 5 | RNVC: 9

13 Nov 2008

5340-01-578-0289
Loop Clamp

015780289
SAE-AS1553: RNCC: 3 | RNVC: 1
AS3257-18: RNCC: 3 | RNVC: 2
AS3257-18: RNCC: 3 | RNVC: 9
AS3257-18: RNCC: 5 | RNVC: 9

24 Sep 2009

5340-01-578-0423
Retaining Strap

015780423
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C23W38N: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-01-575-7230
Dust And Moisture Seal Protective Cover

015757230
667-122XM17: RNCC: 3 | RNVC: 2

13 Jul 2009

5340-00-805-7616
Dust And Moisture Seal Protective Plug

008057616
NAS847: RNCC: 3 | RNVC: 1
NAS842-32A: RNCC: 3 | RNVC: 2
MILC5501TYPE2CLASSASIZE32: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-470-0268
Dust And Moisture Seal Protective Plug

014700268
M5501/15-16G: RNCC: 2 | RNVC: 2
MIL-C-5501/15: RNCC: 4 | RNVC: 1

6 Dec 1999

5340-01-568-7953
Loop Clamp

015687953
S467SSG24-3: RNCC: 3 | RNVC: 2
11645-01102: RNCC: 5 | RNVC: 2
53859-000: RNCC: 5 | RNVC: 2
10009813: RNCC: 7 | RNVC: 2
S000068: RNCC: D | RNVC: 9

10 Nov 2008

5340-01-569-4372
Loop Clamp

015694372
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-36N: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-01-558-3957
Loop Clamp

015583957
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-30N: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-01-560-8081
Rectangula Clamp(1)

015608081
30-302-2D17J21: RNCC: 1 | RNVC: 2
30-302-2D17J21: RNCC: 3 | RNVC: 2
30-302-2D17J21: RNCC: 3 | RNVC: 2
30-302-2D17J21: RNCC: 3 | RNVC: 2
30-302-2D17J21: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

13 Feb 2008

5340-00-720-7749
Loop Clamp

007207749
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587C10: RNCC: 3 | RNVC: 2
AS5587C10: RNCC: 3 | RNVC: 9
AN742H10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-720-6318
Spring Tension Clip

007206318
100-200-9-0: RNCC: 3 | RNVC: 2
1JC4779-9: RNCC: 5 | RNVC: 2
10020090: RNCC: 5 | RNVC: 2
203-42-285: RNCC: 5 | RNVC: 2
1JC4779H09: RNCC: 5 | RNVC: 2
KL1545: RNCC: 5 | RNVC: 2
10015946-071: RNCC: 5 | RNVC: 2
1JC4779-9: RNCC: 5 | RNVC: 2
1JC4779H09: RNCC: 5 | RNVC: 2
437388-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-720-8398
Nut And Bolt Retainer

007208398
910-D-947-5: RNCC: 3 | RNVC: 9
30-1706PC16*MONEEL: RNCC: 5 | RNVC: 1
40-1910A-PC 16: RNCC: 5 | RNVC: 1
40-1930-D*SS,PC 23: RNCC: 5 | RNVC: 1
30-1736,PC 23: RNCC: 5 | RNVC: 1
40-1930-A*CS PC 23: RNCC: 5 | RNVC: 1
30-1296PC23: RNCC: 5 | RNVC: 1
40-1930-C*SS,PC 23: RNCC: 5 | RNVC: 1
40-1932-23: RNCC: 5 | RNVC: 1
40-1338-4PC23: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-705-8553
Helical Compression Spring Retainer

017058553
120123: RNCC: 3 | RNVC: 2

18 Oct 2022

5340-01-707-4015
Dust And Moisture Seal Protective Plug

017074015
3611-082: RNCC: 3 | RNVC: 2

31 Jan 2023

Load More Results