What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 23 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 23 of 1045

5340-01-701-0924
Electronic Equipment Hardware Kit

017010924
11080-3990-01: RNCC: 3 | RNVC: 2

26 Apr 2022

5340-01-701-1769
Bumper

017011769
M1210166-001: RNCC: 3 | RNVC: 2
M1210166: RNCC: D | RNVC: 9

2 May 2022

5340-01-701-2250
Mounting Bracket

017012250
12683273: RNCC: 3 | RNVC: 2

4 May 2022

5340-01-701-1365
Headless Straight Rod

017011365
DR4: RNCC: 3 | RNVC: 2
600-021134-P001: RNCC: 5 | RNVC: 2
600-021134: RNCC: D | RNVC: 9

28 Apr 2022

5340-01-701-2429
Angle Bracket

017012429
12665705-01: RNCC: 3 | RNVC: 2
12665705: RNCC: D | RNVC: 9

5 May 2022

5340-01-701-1816
Pipe Hanger

017011816
5335977: RNCC: 3 | RNVC: 2
5335977: RNCC: 5 | RNVC: 2

3 May 2022

5340-01-701-2375
Access Cover

017012375
06700-30021-041: RNCC: 3 | RNVC: 2
06700-30021: RNCC: D | RNVC: 9

5 May 2022

5340-01-701-3809
Rigid Connecting Link

017013809
167-7569488 / PC NO 64: RNCC: 3 | RNVC: 2
SP002107 / PC NO 56: RNCC: 5 | RNVC: 1
7569488 / PC NO 64: RNCC: C | RNVC: 1

13 May 2022

5340-01-701-4710
Hand Carrying Strap Assembly

017014710
38DLP-HS: RNCC: 3 | RNVC: 2
38DLP-HS: RNCC: 3 | RNVC: 9

18 May 2022

5340-01-701-5767
Mounting Bracket

017015767
M1133850-004: RNCC: 3 | RNVC: 2

24 May 2022

5340-01-702-3952
Mounting Bracket

017023952
12610812: RNCC: 3 | RNVC: 2
12610812: RNCC: 5 | RNVC: 2

1 Jul 2022

5340-01-700-9084
Access Cover

017009084
2000845-4: RNCC: 3 | RNVC: 2
2000845: RNCC: D | RNVC: 9

20 Apr 2022

5340-01-702-2568
Access Cover

017022568
184502: RNCC: 3 | RNVC: 2

24 Jun 2022

5340-01-702-3304
Mounting Bracket

017023304
8287844: RNCC: 3 | RNVC: 2

29 Jun 2022

5340-01-701-6748
Block Clamp

017016748
270T0004-468: RNCC: 3 | RNVC: 2

31 May 2022

5340-01-702-3699
Extension Drawer Slide

017023699
2505380-P: RNCC: 3 | RNVC: 2
2505380: RNCC: D | RNVC: 9

30 Jun 2022

5340-01-701-7284
Mounting Bracket

017017284
4494644: RNCC: 3 | RNVC: 2

3 Jun 2022

5340-01-702-3618
Cushioning Pad

017023618
182096: RNCC: 3 | RNVC: 2

30 Jun 2022

5340-01-702-3631
Hand Carrying Strap Assembly

017023631
4540599: RNCC: 3 | RNVC: 2

30 Jun 2022

5340-01-664-2196
Butt Hinge

016642196
MS20001-4-2000: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

9 Jun 2017

5340-01-698-0823
Mounting Plate

016980823
201212203-10: RNCC: 3 | RNVC: 2

27 Oct 2021

5340-01-699-5789
Butt Hinge

016995789
8789469: RNCC: 3 | RNVC: 2
CS12530072: RNCC: 5 | RNVC: 2
1582A397: RNCC: 5 | RNVC: 2

9 Feb 2022

5340-01-699-5864
Two Function Grabber Arm

016995864
130-701: RNCC: 3 | RNVC: 2

10 Feb 2022

5340-01-699-6029
Loop Clamp

016996029
866-420C: RNCC: 3 | RNVC: 2

11 Feb 2022

5340-01-698-1664
Spacing Threaded Standoff

016981664
CB4201C3CR8H: RNCC: 3 | RNVC: 2

2 Nov 2021

5340-01-699-4393
Loop Clamp

016994393
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-25N: RNCC: 3 | RNVC: 2

31 Jan 2022

5340-01-699-6241
Dust And Moisture Seal Protective Plug

016996241
W084813622: RNCC: 3 | RNVC: 2

14 Feb 2022

5340-01-698-1405
Double Angle Bracket

016981405
NGB550FH08ABP: RNCC: 3 | RNVC: 2
NGB550FH08ABP: RNCC: 3 | RNVC: 2
NGB550FH: RNCC: D | RNVC: 9

1 Nov 2021

5340-01-697-6617
Snap-In Plain Standoff

016976617
DSS1014: RNCC: 3 | RNVC: 2

4 Oct 2021

5340-01-699-4927
Mounting Bracket

016994927
8789395: RNCC: 3 | RNVC: 2

3 Feb 2022

5340-01-698-0333
Loop Clamp

016980333
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG05Y: RNCC: 3 | RNVC: 2

25 Oct 2021

5340-01-698-0512
Loop Clamp

016980512
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG16Y: RNCC: 3 | RNVC: 2

26 Oct 2021

5340-01-697-7154
Mechanic Equipment Hardware Kit

016977154
328-8410: RNCC: 3 | RNVC: 2

6 Oct 2021

5340-01-697-7231
Angle Bracket

016977231
541-3062: RNCC: 3 | RNVC: 2

6 Oct 2021

5340-01-697-7454
Access Cover

016977454
525-6427: RNCC: 3 | RNVC: 2

7 Oct 2021

5340-01-698-2151
Mounting Bracket

016982151
523-4537: RNCC: 3 | RNVC: 2

3 Nov 2021

5340-01-697-6451
Grommet Assembly

016976451
IT147G5F5: RNCC: 3 | RNVC: 2

1 Oct 2021

5340-01-699-9219
Mounting Bracket

016999219
HA6103A01: RNCC: 3 | RNVC: 2

7 Mar 2022

5340-01-699-9224
Access Cover

016999224
D 0 01 0052: RNCC: 3 | RNVC: 2

7 Mar 2022

5340-01-699-1793
Access Cover

016991793
863-510641: RNCC: 3 | RNVC: 2

13 Jan 2022

5340-01-699-1439
Mounting Plate

016991439
2281814-01M1: RNCC: 3 | RNVC: 2

11 Jan 2022

5340-01-699-0013
Mounting Bracket

016990013
12628442: RNCC: 3 | RNVC: 2

29 Dec 2021

5340-01-698-9964
Lock-Release Lever

016989964
N2-2-301-01-20: RNCC: 3 | RNVC: 2

29 Dec 2021

5340-01-699-0495
Access Cover

016990495
373967-1334: RNCC: 3 | RNVC: 2

5 Jan 2022

5340-01-700-0158
Mounting Bracket

017000158
12680066: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-699-8989
Angle Bracket

016998989
9M700BV1-10L: RNCC: 3 | RNVC: 2
9M700BV1-10L: RNCC: 3 | RNVC: 2
9M700BV1-10L: RNCC: 7 | RNVC: 2

4 Mar 2022

5340-01-699-0702
Loop Clamp

016990702
3250: RNCC: 3 | RNVC: 2
3250: RNCC: 7 | RNVC: 2

5 Jan 2022

5340-01-699-4370
Manual Control Handle

016994370
8709069: RNCC: 3 | RNVC: 2

31 Jan 2022

5340-01-698-1728
Drain Pan Assembly

016981728
197K2344-100: RNCC: 3 | RNVC: 2
197K2344-100: RNCC: 5 | RNVC: 9

2 Nov 2021

5340-01-699-4841
Strapping

016994841
5-13-10816-2: RNCC: 3 | RNVC: 2

2 Feb 2022

5340-01-698-1502
Bow Handle

016981502
51090: RNCC: 3 | RNVC: 2

1 Nov 2021

5340-01-697-2389
Loop Clamp

016972389
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D23-36N: RNCC: 3 | RNVC: 2

9 Sep 2021

5340-01-699-6802
Door Handle

016996802
5746946: RNCC: 3 | RNVC: 2
8287449 / P22: RNCC: D | RNVC: 9

17 Feb 2022

5340-01-697-2504
Nut And Bolt Retainer

016972504
NAS578: RNCC: 3 | RNVC: 1
NAS578C5A: RNCC: 3 | RNVC: 2

9 Sep 2021

5340-01-699-6815
Bumper

016996815
1700142417: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-699-9291
Retaining Strap

016999291
JM44SC13D42HR: RNCC: 3 | RNVC: 2

7 Mar 2022

5340-01-699-8497
Mounting Bracket

016998497
LG0646-3712: RNCC: 3 | RNVC: 2

2 Mar 2022

5340-01-698-3982
Section Block Clamp

016983982
NGC500EG-2B18: RNCC: 3 | RNVC: 2
NGC500EG-2B18: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

15 Nov 2021

5340-01-699-1729
Mounting Plate

016991729
4370132: RNCC: 3 | RNVC: 2

13 Jan 2022

5340-01-699-4573
Webbing Strap

016994573
02-9482000000: RNCC: 3 | RNVC: 2
19006B1846-0: RNCC: 3 | RNVC: 2
19006B1846: RNCC: 7 | RNVC: 2

1 Feb 2022

5340-01-699-0833
Strapping

016990833
113-8753280ITEM2: RNCC: 3 | RNVC: 1

6 Jan 2022

5340-01-699-1963
Retaining Clip

016991963
4401184-1: RNCC: 3 | RNVC: 2

14 Jan 2022

5340-01-699-1070
Corrosion Preventive Anode

016991070
212974: RNCC: 3 | RNVC: 2
HJ292 13 003: RNCC: D | RNVC: 9

7 Jan 2022

5340-01-698-3461
Spring Tension Clip

016983461
70205-55002-103: RNCC: 3 | RNVC: 2

10 Nov 2021

5340-01-698-3097
Access Cover

016983097
D-4703: RNCC: 3 | RNVC: 2
10-4725-C1ITEM137: RNCC: 5 | RNVC: 2

9 Nov 2021

5340-01-698-8549
Mounting Bracket

016988549
151-008069-0005: RNCC: 3 | RNVC: 2
151-008069: RNCC: D | RNVC: 9

15 Dec 2021

5340-01-698-9203
Mounting Bracket

016989203
4526078: RNCC: 3 | RNVC: 2

20 Dec 2021

5340-01-698-9282
Mounting Plate

016989282
D1-51809D: RNCC: 3 | RNVC: 2

21 Dec 2021

5340-01-664-4227
Butt Hinge

016644227
MS20001-6-700: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

19 Jun 2017

5340-01-697-9021
Webbing Strap

016979021
C114S-PADBLK: RNCC: 3 | RNVC: 2

18 Oct 2021

5340-01-700-8894
Dust And Moisture Seal Protective Cap-Plug

017008894
R932007020: RNCC: 3 | RNVC: 2

19 Apr 2022

5340-01-697-7278
Rod End Connector

016977278
5HP41791-101: RNCC: 3 | RNVC: 2

6 Oct 2021

5340-01-699-2881
Butt Hinge

016992881
MS20001C10-1500: RNCC: 2 | RNVC: 2

21 Jan 2022

5340-01-698-6156
Mounting Plate

016986156
428920-1: RNCC: 3 | RNVC: 2
428920-1: RNCC: 5 | RNVC: 2
428920: RNCC: D | RNVC: 9

30 Nov 2021

5340-01-699-3021
Access Cover

016993021
772013: RNCC: 3 | RNVC: 2

22 Jan 2022

5340-01-698-7611
Blank Panel

016987611
MA-BL1: RNCC: 3 | RNVC: 9

7 Dec 2021

5340-01-698-7483
Mounting Bracket

016987483
1000056: RNCC: 3 | RNVC: 2

4 Dec 2021

5340-01-699-3012
Access Cover

016993012
5HH46193-107: RNCC: 3 | RNVC: 2

22 Jan 2022

5340-01-697-9177
Loop Clamp

016979177
30-302-2C07J06: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-699-3663
Retaining Clip

016993663
9-2-4822: RNCC: 3 | RNVC: 2

26 Jan 2022

5340-01-698-7863
Mounting Bracket

016987863
329A665-1: RNCC: 3 | RNVC: 2

8 Dec 2021

5340-01-698-8026
Nut And Bolt Retainer

016988026
16115692: RNCC: 3 | RNVC: 2

9 Dec 2021

5340-01-699-3977
Webbing Strap

016993977
9-2-4811: RNCC: 3 | RNVC: 2

27 Jan 2022

5340-01-701-0074
Mounting Bracket

017010074
06100-08436-102: RNCC: 3 | RNVC: 2
06100-08436: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-700-1174
Rigid Connecting Link

017001174
2112-0051-1: RNCC: 3 | RNVC: 2

17 Mar 2022

5340-01-699-2785
Electronic Equipment Hardware Kit

016992785
4532499: RNCC: 3 | RNVC: 2

21 Jan 2022

5340-01-698-6492
Mounting Bracket

016986492
4354378: RNCC: 3 | RNVC: 2

1 Dec 2021

5340-01-700-8786
Mounting Bracket

017008786
06100-08003-106: RNCC: 3 | RNVC: 2

19 Apr 2022

5340-01-700-0805
Access Cover

017000805
1205337: RNCC: 3 | RNVC: 2

16 Mar 2022

5340-01-698-7683
Mounting Plate

016987683
DSS1080: RNCC: 3 | RNVC: 2

7 Dec 2021

5340-01-698-7657
Mounting Plate

016987657
DSS1074: RNCC: 3 | RNVC: 2

7 Dec 2021

5340-01-698-8054
Loop Holder

016988054
72027-14: RNCC: 3 | RNVC: 2

9 Dec 2021

5340-01-700-9519
Angle Bracket

017009519
06100-08108-101: RNCC: 3 | RNVC: 2
06100-08108: RNCC: D | RNVC: 9

21 Apr 2022

5340-01-700-8513
Mounting Bracket

017008513
1204492: RNCC: 3 | RNVC: 2

16 Apr 2022

5340-01-700-0772
Access Cover

017000772
2RTU-E: RNCC: 3 | RNVC: 2

16 Mar 2022

5340-01-699-3446
Bumper

016993446
RTTGN-11M-STOP: RNCC: 3 | RNVC: 2

25 Jan 2022

5340-01-698-7755
Mounting Bracket

016987755
328A584-4: RNCC: 3 | RNVC: 2
328A584: RNCC: D | RNVC: 9

7 Dec 2021

5340-01-698-5239
Dust And Moisture Seal Protective Cover

016985239
9410344: RNCC: 3 | RNVC: 2
9410344: RNCC: 5 | RNVC: 2

22 Nov 2021

5340-01-698-3201
Mounting Bracket

016983201
78600-01001-044: RNCC: 3 | RNVC: 2

9 Nov 2021

5340-01-700-8014
Filler Opening Cap

017008014
06393-10007-101: RNCC: 3 | RNVC: 2
06393-10007: RNCC: D | RNVC: 9

14 Apr 2022

5340-01-698-4410
Mounting Bracket

016984410
60085540-001: RNCC: 3 | RNVC: 2

17 Nov 2021

5340-01-698-4629
Pad Eye

016984629
845-7526223-4-84: RNCC: 3 | RNVC: 1

18 Nov 2021

5340-01-700-0370
Handle Grip

017000370
10088083: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-699-7519
Dust And Moisture Seal Protective Cap

016997519
1115503: RNCC: 3 | RNVC: 2

23 Feb 2022

5340-01-699-6440
Dust And Moisture Seal Protective Cap

016996440
23484202: RNCC: 3 | RNVC: 2

15 Feb 2022

5340-01-400-0969
Spring Tension Clip

014000969
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-098-14T: RNCC: 3 | RNVC: 2

8 Dec 1994

5340-01-054-8014
Butt Hinge

010548014
AA55590-10E: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-10E: RNCC: 5 | RNVC: 9
MS35822-2E: RNCC: 5 | RNVC: 9
MS35822-10E: RNCC: 5 | RNVC: 9

27 Jan 1978

5340-01-704-3910
Utility Access Door

017043910
5-13-10517-2: RNCC: 3 | RNVC: 2
5-13-10517-2: RNCC: 5 | RNVC: 2
5-13-10517: RNCC: D | RNVC: 9

9 Sep 2022

5340-01-703-5643
Access Cover

017035643
7435564-00: RNCC: 3 | RNVC: 2
7435564-00: RNCC: 5 | RNVC: 2
7435564: RNCC: D | RNVC: 9

8 Sep 2022

5340-01-705-3495
Loop Clamp

017053495
NAS1715C44T: RNCC: 3 | RNVC: 2

15 Sep 2022

5340-01-076-9658
Spring Tension Clip

010769658
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B098-10C: RNCC: 3 | RNVC: 2

16 May 1979

5340-01-684-5227
Retaining Clip

016845227
146T6914Y2: RNCC: 3 | RNVC: 1
146T6914-2: RNCC: C | RNVC: 1

6 Nov 2019

5340-01-612-4128
Door Holder

016124128
F085878-1: RNCC: 3 | RNVC: 2
F090523 REV A IT 10: RNCC: 5 | RNVC: 2
F090623 REV A IT 2: RNCC: 5 | RNVC: 2
F090833 REV A IT 6: RNCC: 5 | RNVC: 2
HH-38: RNCC: 5 | RNVC: 2
F085753 REV A IT 10: RNCC: 5 | RNVC: 2
F090963 REV A IT 10: RNCC: 5 | RNVC: 2
F085878-2: RNCC: 5 | RNVC: 2
F090873 REV A IT 10: RNCC: 5 | RNVC: 2
F090913 REV A IT 10: RNCC: 5 | RNVC: 2

11 Oct 2012

5340-01-700-2968
Dust And Moisture Seal Protective Cover

017002968
201-038-0276: RNCC: 3 | RNVC: 2

23 Mar 2022

5340-01-608-0472
Retaining Strap

016080472
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D25W46N: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-01-702-8110
Mounting Bracket

017028110
12613167: RNCC: 3 | RNVC: 2
12613167: RNCC: 5 | RNVC: 2

29 Jul 2022

5340-01-702-8341
Bumper

017028341
9306K18: RNCC: 3 | RNVC: 2
12604818: RNCC: 5 | RNVC: 2
12604818: RNCC: 7 | RNVC: 2

1 Aug 2022

5340-01-702-7438
Access Cover

017027438
PC28-25: RNCC: 3 | RNVC: 2

25 Jul 2022

5340-01-702-7761
Mounting Bracket

017027761
613026: RNCC: 3 | RNVC: 2
12612255: RNCC: 5 | RNVC: 9
12612255: RNCC: 7 | RNVC: 2

27 Jul 2022

5340-01-702-8517
Retaining Harness

017028517
NAS1213R20J120: RNCC: 3 | RNVC: 2

2 Aug 2022

5340-01-702-9580
Dust And Moisture Seal Protective Cap

017029580
10-580902-28Y: RNCC: 3 | RNVC: 2

9 Aug 2022

5340-01-702-7106
Mounting Bracket

017027106
12610163: RNCC: 3 | RNVC: 2
12610163: RNCC: 5 | RNVC: 2

21 Jul 2022

5340-01-702-7098
Mounting Plate

017027098
17-61017-01: RNCC: 3 | RNVC: 2

21 Jul 2022

5340-01-702-8896
Loop Clamp

017028896
751SS48-8AF: RNCC: 3 | RNVC: 2
GC500BC48C8F: RNCC: 5 | RNVC: 2

4 Aug 2022

5340-01-703-0614
Loop Clamp

017030614
NAS1715CT4SWH: RNCC: 3 | RNVC: 2

15 Aug 2022

5340-01-607-7807
Retaining Strap

016077807
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D14W32N: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-01-607-7297
Retaining Strap

016077297
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C17W29N: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-01-703-1597
Access Cover

017031597
717407235-009: RNCC: 3 | RNVC: 2
717407235: RNCC: D | RNVC: 9

19 Aug 2022

5340-01-703-2146
Rigid Connecting Link

017032146
B001273F01015-1: RNCC: 3 | RNVC: 2

24 Aug 2022

5340-01-701-3084
Dust And Moisture Seal Boot

017013084
770-003S203W1: RNCC: 3 | RNVC: 2
70039048: RNCC: 5 | RNVC: 2

10 May 2022

5340-01-703-0844
Mounting Plate

017030844
12601381: RNCC: 3 | RNVC: 2
12601381: RNCC: 5 | RNVC: 2

16 Aug 2022

5340-01-703-2799
Angle Bracket

017032799
421975-2: RNCC: 3 | RNVC: 2
421975: RNCC: D | RNVC: 9

26 Aug 2022

5340-01-703-3435
Blank Panel

017033435
PBL-3: RNCC: 3 | RNVC: 2

31 Aug 2022

5340-01-703-1302
Mounting Bracket

017031302
12613965: RNCC: 3 | RNVC: 2
12613965: RNCC: C | RNVC: 1

18 Aug 2022

5340-01-703-1589
Mounting Bracket

017031589
102008HP: RNCC: 3 | RNVC: 2

19 Aug 2022

5340-01-701-3088
Dust And Moisture Seal Boot

017013088
770-003S204W1: RNCC: 3 | RNVC: 2
70039049: RNCC: 5 | RNVC: 2

10 May 2022

5340-01-689-3530
Pipe Pulling Head Set

016893530
876073-201: RNCC: 3 | RNVC: 2
876073: RNCC: 5 | RNVC: 9

16 Jun 2020

5340-01-691-7077
Loop Clamp

016917077
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C27KH: RNCC: 3 | RNVC: 2
MS9350-26: RNCC: 5 | RNVC: 9
NAS1715C27KH: RNCC: 5 | RNVC: 9

23 Oct 2020

5340-01-086-6193
Expansion Plug

010866193
216524: RNCC: 3 | RNVC: 2
CU216524: RNCC: 5 | RNVC: 1
5340010866193: RNCC: 6 | RNVC: 9

1 Dec 1979

5340-01-691-3956
Retaining Strap

016913956
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C40-159S: RNCC: 3 | RNVC: 2

7 Oct 2020

5340-01-087-0682
Expansion Plug

010870682
213394: RNCC: 3 | RNVC: 2
8F-6575: RNCC: 5 | RNVC: 2
8F6575: RNCC: 5 | RNVC: 2

11 Dec 1979

5340-01-306-1547
Electrical-Mechanical Equipment Post

013061547
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4B24: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-01-307-3896
Webbing Strap

013073896
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R15CJ30: RNCC: 3 | RNVC: 2

9 Sep 1989

5340-01-102-8150
Loop Clamp

011028150
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C18M: RNCC: 3 | RNVC: 2

28 Oct 1980

5340-01-687-4893
Mounting Bracket

016874893
444-062-051-107: RNCC: 3 | RNVC: 2
444-062-051-105: RNCC: 5 | RNVC: 9

3 Apr 2020

5340-01-687-2501
Loop Clamp

016872501
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C16-18N: RNCC: 3 | RNVC: 2

24 Mar 2020

5340-01-674-3168
Loop Clamp

016743168
NASM21333: RNCC: 3 | RNVC: 1
MS21333-127A: RNCC: 3 | RNVC: 2
MS21333-127A: RNCC: 5 | RNVC: 9

20 Jul 2018

5340-01-296-2767
Electrical-Mechanical Equipment Post

012962767
1515-M03-F21-632: RNCC: 3 | RNVC: 2
8263: RNCC: 5 | RNVC: 2
8263: RNCC: 5 | RNVC: 2
4566-632-B-12: RNCC: 5 | RNVC: 2
B-7336-632: RNCC: 5 | RNVC: 9
BR-6981-3.000-35: RNCC: 5 | RNVC: 9
14040-H-A-3.000-31: RNCC: 5 | RNVC: 9
165-37-BR-6-32-M: RNCC: 5 | RNVC: 9
B-7336-632-39: RNCC: 5 | RNVC: 9
1779AS140-1: RNCC: 7 | RNVC: 2

17 Mar 1989

5340-00-486-1210
Loop Clamp

004861210
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D30-25N: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-01-176-9567
Manual Control Lever

011769567
07381002105: RNCC: 3 | RNVC: 2
20326 FIND 2: RNCC: 5 | RNVC: 2
C7381.002.105: RNCC: 5 | RNVC: 9
C7381.002.105: RNCC: 5 | RNVC: 9
20326 FIND 2: RNCC: 5 | RNVC: 9
20326: RNCC: D | RNVC: 9

18 Apr 1984

5340-01-144-9672
Turnbuckle

011449672
NAS1047: RNCC: 3 | RNVC: 1
NAS1047-4-040: RNCC: 3 | RNVC: 2
NAS1047-4P040: RNCC: C | RNVC: 1

31 Dec 1982

5340-01-703-4504
Webbing Strap

017034504
5-13-13457-1: RNCC: 3 | RNVC: 2
5-13-13457: RNCC: 7 | RNVC: 2

8 Sep 2022

5340-01-654-4183
Helical Compression Spring Retainer

016544183
86460-11: RNCC: 3 | RNVC: 1
86460-10: RNCC: 5 | RNVC: 9

27 Apr 2016

5340-01-443-7685
Loop Clamp

014437685
MS25281-10: RNCC: 2 | RNVC: 2
SAE-AS25281: RNCC: 5 | RNVC: 1

17 Apr 1997

5340-01-451-1415
Angle Bracket

014511415
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743B10: RNCC: 3 | RNVC: 2
AN743B10: RNCC: 5 | RNVC: 9

5 Dec 1997

5340-01-454-3455
Metal Grille

014543455
L200 017 050: RNCC: 3 | RNVC: 2
211090286: RNCC: 5 | RNVC: 2
6956607: RNCC: C | RNVC: 1

27 Mar 1998

5340-01-423-2346
Webbing Strap

014232346
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10K32: RNCC: 3 | RNVC: 2

19 Dec 1995

5340-01-449-6575
Padlock Set

014496575
F2827-A3-10: RNCC: 2 | RNVC: 2
FF-P-2827: RNCC: 4 | RNVC: 1
FF-P-2827-A: RNCC: 5 | RNVC: 9

9 Oct 1997

5340-01-701-3909
Retaining Clip

017013909
60-5803-1: RNCC: 3 | RNVC: 2
60-5803: RNCC: D | RNVC: 9

16 May 2022

5340-01-580-9021
Loop Clamp

015809021
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C21-31N: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-01-582-0191
Loop Clamp

015820191
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C15-34N: RNCC: 3 | RNVC: 2

4 Feb 2010

5340-01-582-0389
Plug Button

015820389
NAS451: RNCC: 3 | RNVC: 1
NAS451-10: RNCC: 3 | RNVC: 2
NAS-451-10: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-01-413-8691
Loop Clamp

014138691
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT13Z: RNCC: 3 | RNVC: 2

24 May 1995

5340-01-310-9410
Loop Clamp

013109410
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C26: RNCC: 3 | RNVC: 2
AN735C26: RNCC: 5 | RNVC: 9

16 Nov 1989

5340-01-340-9757
Electrical-Mechanical Equipment Post

013409757
NAS1831: RNCC: 3 | RNVC: 1
NAS1831H3B10: RNCC: 3 | RNVC: 2

23 Jun 1991

5340-01-580-0070
Mounting Plate

015800070
2G9245: RNCC: 3 | RNVC: 2
2G-9245: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-01-578-0316
Retaining Strap

015780316
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W50N: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-01-154-4376
Loop Clamp

011544376
M85052/1-22: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026000122NB: RNCC: 5 | RNVC: 1
S664NB22: RNCC: 5 | RNVC: 1
JM44LC70WPH22YN: RNCC: 5 | RNVC: 1
9M972-22N: RNCC: 5 | RNVC: 1
1444PHW22Y: RNCC: 5 | RNVC: 1
9M972-22N: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9

25 May 1983

5340-00-959-3497
Shelf Bracket

009593497
FFH111-F1068 12IN X 14IN: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
796J: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-283-7251
Electrical-Mechanical Equipment Post

012837251
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3B10: RNCC: 3 | RNVC: 2
9730SS0440-0256: RNCC: 5 | RNVC: 9

12 Aug 1988

5340-01-321-3493
Hand Crank

013213493
5-45-9601: RNCC: 3 | RNVC: 2
1701-3192-700: RNCC: 5 | RNVC: 9
1701-3192-700: RNCC: 5 | RNVC: 9
1701-3192-700: RNCC: 5 | RNVC: 9
5-45-9601: RNCC: 5 | RNVC: 9

16 Jun 1990

5340-01-705-3138
Utility Access Door

017053138
5-13-10900-1: RNCC: 3 | RNVC: 2

13 Sep 2022

5340-01-705-3178
Spacing Threaded Standoff

017053178
SS-7205-440-12: RNCC: 3 | RNVC: 2

13 Sep 2022

5340-01-705-3394
Bumper

017053394
8668635-001: RNCC: 3 | RNVC: 2
8668635: RNCC: D | RNVC: 9

14 Sep 2022

5340-01-705-3402
Mounting Plate

017053402
201757558-01: RNCC: 3 | RNVC: 2

14 Sep 2022

5340-01-705-3601
Mounting Bracket

017053601
NGB550FF0101: RNCC: 3 | RNVC: 2
NGB550FF0101: RNCC: 5 | RNVC: 2

15 Sep 2022

5340-01-528-2029
Spring Tension Clip

015282029
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-040-04T: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-01-699-4283
Threaded Standoff Assembly

016994283
P0001523: RNCC: 3 | RNVC: 2

29 Jan 2022

5340-01-703-0907
Mounting Plate

017030907
4295130: RNCC: 3 | RNVC: 2
12607896: RNCC: 5 | RNVC: 2

16 Aug 2022

5340-01-703-1483
Dust And Moisture Seal Boot

017031483
12608750: RNCC: 3 | RNVC: 2
696N9V14: RNCC: 5 | RNVC: 2

19 Aug 2022

5340-01-703-1682
Angle Bracket

017031682
411982-1: RNCC: 3 | RNVC: 2
411982: RNCC: D | RNVC: 9

22 Aug 2022

5340-01-703-2480
Mounting Bracket

017032480
RTTFEN/MNT-BACK-MD1-NP: RNCC: 3 | RNVC: 2

25 Aug 2022

5340-01-703-3610
Access Door Hinge

017033610
5-13-10536-5: RNCC: 3 | RNVC: 2
5-13-10536: RNCC: D | RNVC: 9

1 Sep 2022

5340-01-703-3870
Mechanic Equipment Hardware Kit

017033870
01-004-30050: RNCC: 3 | RNVC: 2

2 Sep 2022

5340-01-703-4476
Access Cover

017034476
5-13-10844-2: RNCC: 3 | RNVC: 2
5-13-10844: RNCC: D | RNVC: 9

8 Sep 2022

5340-01-703-4484
Access Cover

017034484
5-13-10846-1: RNCC: 3 | RNVC: 2
5-13-10846: RNCC: D | RNVC: 9

8 Sep 2022

5340-01-703-4937
Access Cover

017034937
5-13-10432-1: RNCC: 3 | RNVC: 2
5-13-10432-1: RNCC: 5 | RNVC: 2
5-13-10432: RNCC: D | RNVC: 9

8 Sep 2022

5340-01-592-5233
Loop Clamp

015925233
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCE15: RNCC: 3 | RNVC: 2
AS21919WCE15: RNCC: 3 | RNVC: 9

9 Mar 2011

5340-01-242-3059
Electrical-Mechanical Equipment Post

012423059
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C56: RNCC: 3 | RNVC: 2
NAS1786C06-56: RNCC: 5 | RNVC: 9

9 Oct 1986

5340-01-533-4896
Loop Clamp

015334896
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P4CN: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-01-590-9475
Sealing Plug Assembly

015909475
SAE-AS3588: RNCC: 3 | RNVC: 1
AS3588-60: RNCC: 3 | RNVC: 2
AS3588-60: RNCC: 3 | RNVC: 9

4 Jan 2011

5340-01-590-9378
Sealing Plug Assembly

015909378
SAE-AS3585: RNCC: 3 | RNVC: 1
AS3585-55: RNCC: 3 | RNVC: 2
AS3585-55: RNCC: 3 | RNVC: 9

4 Jan 2011

5340-01-694-2834
Dust And Moisture Seal Protective Cap

016942834
NAS835: RNCC: 3 | RNVC: 1
NAS835-8: RNCC: 3 | RNVC: 2

25 Mar 2021

5340-01-591-0433
Sealing Plug Assembly

015910433
SAE-AS3589: RNCC: 3 | RNVC: 1
AS3589-54: RNCC: 3 | RNVC: 2
AS3589-54: RNCC: 3 | RNVC: 9

7 Jan 2011

5340-01-591-0445
Sealing Plug Assembly

015910445
SAE-AS3588: RNCC: 3 | RNVC: 1
AS3588-08: RNCC: 3 | RNVC: 2
AS3588-08: RNCC: 3 | RNVC: 9

7 Jan 2011

5340-01-235-9579
Electrical-Mechanical Equipment Post

012359579
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6J08: RNCC: 3 | RNVC: 2
5497497-1: RNCC: C | RNVC: 1

9 Jul 1986

5340-01-692-9090
Loop Clamp

016929090
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919DF35: RNCC: 3 | RNVC: 2
301-110813: RNCC: 5 | RNVC: 2

19 Jan 2021

5340-01-700-3659
Double Angle Bracket

017003659
8254817-1: RNCC: 3 | RNVC: 2
8254817-1/FIND SHEET 1: RNCC: 5 | RNVC: 1
8254817: RNCC: D | RNVC: 9

24 Mar 2022

5340-01-702-4537
Access Cover

017024537
294-7260: RNCC: 3 | RNVC: 2
294-7260: RNCC: 5 | RNVC: 2

7 Jul 2022

5340-01-702-4837
Access Cover

017024837
8028-090-9678: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-699-6808
Spacing Threaded Standoff

016996808
6C25H25SP/MF: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-699-4518
Mounting Bracket

016994518
4370718: RNCC: 3 | RNVC: 2

1 Feb 2022

5340-01-699-4376
Utility Access Door

016994376
MC-058468-01: RNCC: 3 | RNVC: 2
MC-058402 SHEET 1 PC NO. 2: RNCC: D | RNVC: 9

31 Jan 2022

5340-01-701-6795
Dust And Moisture Seal Protective Cap-Plug

017016795
4158AS0188-1: RNCC: 3 | RNVC: 1
4158AS0188-1: RNCC: 3 | RNVC: 2
4158AS0188: RNCC: D | RNVC: 9

1 Jun 2022

5340-01-700-5178
Loop Clamp

017005178
618E004-198: RNCC: 3 | RNVC: 2
618E004: RNCC: D | RNVC: 9

31 Mar 2022

5340-01-701-6704
Rigid Connecting Link

017016704
52000330021-1: RNCC: 3 | RNVC: 2

31 May 2022

5340-01-699-4631
Dust And Moisture Seal Protective Cap

016994631
HVC-312-16: RNCC: 3 | RNVC: 2

1 Feb 2022

5340-01-702-6676
Mounting Bracket

017026676
5-13-10148-2: RNCC: 3 | RNVC: 2
5-13-10148: RNCC: 7 | RNVC: 2

19 Jul 2022

5340-01-702-6898
Mounting Bracket

017026898
5-13-10205-2: RNCC: 3 | RNVC: 2

20 Jul 2022

5340-01-699-6672
Mounting Plate

016996672
D 0 01 0027: RNCC: 3 | RNVC: 2

16 Feb 2022

5340-01-700-4847
Butt Hinge Leaf

017004847
74A151828-2002: RNCC: 3 | RNVC: 2

30 Mar 2022

5340-01-699-4600
Rod End Clevis

016994600
12644265: RNCC: 3 | RNVC: 2

1 Feb 2022

5340-01-699-5919
Mounting Bracket

016995919
333/H7885: RNCC: 3 | RNVC: 2

10 Feb 2022

5340-01-702-5950
Resilient Mount Plate

017025950
123SME90180-1: RNCC: 3 | RNVC: 2
123SME90180-1: RNCC: 5 | RNVC: 2

18 Jul 2022

5340-01-699-6030
Mounting Bracket

016996030
863-130118: RNCC: 3 | RNVC: 2

11 Feb 2022

5340-01-701-6743
Block Clamp

017016743
270T0004-251: RNCC: 3 | RNVC: 2

31 May 2022

5340-01-701-5390
Cover Retainer

017015390
350162-1: RNCC: 3 | RNVC: 2

23 May 2022

5340-01-702-5270
Mechanic Equipment Hardware Kit

017025270
BK-11: RNCC: 3 | RNVC: 2
280921: RNCC: D | RNVC: 9

13 Jul 2022

5340-01-699-5271
Mounting Bracket

016995271
268471-1: RNCC: 3 | RNVC: 2
268471-1: RNCC: 3 | RNVC: 2
A14839-1: RNCC: 7 | RNVC: 2

7 Feb 2022

5340-01-702-5166
Access Cover

017025166
L3053624-014: RNCC: 3 | RNVC: 2
L3053624: RNCC: D | RNVC: 9

12 Jul 2022

5340-01-702-4902
Mounting Bracket

017024902
10080872: RNCC: 3 | RNVC: 2
5-15-36044: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-702-5173
Mounting Bracket

017025173
12610176: RNCC: 3 | RNVC: 2
12610176: RNCC: 5 | RNVC: 2

12 Jul 2022

5340-01-702-5497
Access Cover

017025497
L3053624-004: RNCC: 3 | RNVC: 2
L3053624: RNCC: D | RNVC: 9

14 Jul 2022

5340-01-700-6596
Access Cover

017006596
10092417: RNCC: 3 | RNVC: 2

6 Apr 2022

5340-01-138-7840
Retaining Strap

011387840
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D28W28N: RNCC: 3 | RNVC: 2
10392611: RNCC: 6 | RNVC: 9

20 Sep 1982

5340-01-209-8315
Spring Tension Clip

012098315
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B034-06N: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-01-702-0943
Multiple Angle Bracket

017020943
988-0285-002: RNCC: 3 | RNVC: 2
988-0285: RNCC: D | RNVC: 9

21 Jun 2022

5340-01-702-0628
Dust And Moisture Seal Protective Cap

017020628
12596595: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-0951
Dust And Moisture Seal Protective Cap

017000951
21105-1008-1: RNCC: 3 | RNVC: 2
21837 FIND 18: RNCC: C | RNVC: 1
21837 SHEET 1: RNCC: D | RNVC: 9

16 Mar 2022

5340-01-702-0699
Mounting Bracket

017020699
988-0819-002: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-0688
Multiple Angle Bracket

017000688
988-0797-001: RNCC: 3 | RNVC: 2
988-0797: RNCC: D | RNVC: 9

15 Mar 2022

5340-01-702-0727
Mounting Plate

017020727
988-0700: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0752
Mounting Bracket

017020752
988-0328: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0774
Manual Control Lever

017020774
988-0821-001: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-1004
Angle Bracket

017001004
3449AS702-6: RNCC: 3 | RNVC: 2
3449AS702: RNCC: D | RNVC: 9

16 Mar 2022

5340-01-700-1026
Helical Compression Spring Seat

017001026
09-AL-AL-VITON-SS-SPRING: RNCC: 3 | RNVC: 2

16 Mar 2022

5340-01-702-0833
Bumper

017020833
133094-1: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0883
Mounting Plate

017020883
12617993: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-1080
Mounting Bracket

017021080
R0168544: RNCC: 3 | RNVC: 2
R0168544-0103: RNCC: D | RNVC: 9

22 Jun 2022

5340-01-702-1249
Extension Handle

017021249
12617629: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-701-1174
Turnbuckle

017011174
2998T54: RNCC: 3 | RNVC: 2
2998T54: RNCC: 3 | RNVC: 2

27 Apr 2022

5340-01-702-0897
Detent Plunger

017020897
888-1115: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9868
Mounting Bracket

017019868
12596377: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0023
Mounting Bracket

017020023
12639381: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9897
Mounting Bracket

017019897
12617717: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9942
Mounting Bracket

017019942
12596741: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9947
Mounting Plate

017019947
12594515: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9950
Thumb Latch

017019950
TL-20-101-52: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9788
Access Cover

017019788
12617394: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0627
Mounting Bracket

017020627
12594775: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0635
Rod End Clevis

017020635
12618148: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0645
Lock-Release Lever

017020645
133185-1: RNCC: 3 | RNVC: 2
PROV-133185-1: RNCC: D | RNVC: 9

21 Jun 2022

5340-01-701-0874
Seal Retaining Plate

017010874
2003112-1: RNCC: 3 | RNVC: 2
2003112: RNCC: D | RNVC: 9

26 Apr 2022

5340-01-700-0394
Hitch Pin

017000394
HP6256WC: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-702-0260
Dust And Moisture Seal Protective Cap

017020260
2101580-2: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-0062
Aspirator Strip

017010062
65991-101: RNCC: 3 | RNVC: 1

21 Apr 2022

5340-01-700-0238
Extension Drawer Slide Section

017000238
8908B: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-700-0481
Mounting Bracket

017000481
12986653-5: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-701-1505
Webbing Strap

017011505
LS1152959: RNCC: 1 | RNVC: 2
80738002-00-AA: RNCC: 3 | RNVC: 2

29 Apr 2022

5340-01-700-1790
Retaining Clip

017001790
42714005: RNCC: 3 | RNVC: 2

19 Mar 2022

5340-01-701-1948
Webbing Strap

017011948
15026A0015-0: RNCC: 3 | RNVC: 2
RIP K-07-GE5-BK: RNCC: 5 | RNVC: 2

3 May 2022

5340-01-701-2228
Retaining Harness

017012228
5-19-15399: RNCC: 3 | RNVC: 2

4 May 2022

5340-01-700-1873
Mounting Plate

017001873
12680080: RNCC: 3 | RNVC: 2

21 Mar 2022

5340-01-702-1731
Access Cover

017021731
12593926: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-2711
Block Clamp

017022711
270T0004-477: RNCC: 3 | RNVC: 2

25 Jun 2022

5340-01-701-3827
Section Block Clamp

017013827
NGC500EG-5C9: RNCC: 3 | RNVC: 2
NGC500EG-5C9: RNCC: 5 | RNVC: 2
NGC500EG-5C9: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

13 May 2022

5340-01-701-5162
Dust And Moisture Seal Protective Plug

017015162
350161-2: RNCC: 3 | RNVC: 2

20 May 2022

5340-01-702-3332
Mounting Bracket

017023332
180615: RNCC: 3 | RNVC: 2

29 Jun 2022

5340-01-700-3984
Leakproof Seal Plug

017003984
520020: RNCC: 3 | RNVC: 2

26 Mar 2022

5340-01-239-5354
Butt Hinge Leaf

012395354
MS20001-PY9-7000: RNCC: 2 | RNVC: 2
MS20001PY9-7000: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
5817157-75: RNCC: D | RNVC: 9

30 Aug 1986

5340-01-700-3991
Dust And Moisture Seal Protective Cap

017003991
12272-4516-01: RNCC: 3 | RNVC: 2

26 Mar 2022

5340-01-701-4236
Cushioning Pad

017014236
12668385: RNCC: 3 | RNVC: 2

16 May 2022

5340-01-702-3116
Handle Grip

017023116
S08-390: RNCC: 3 | RNVC: 2
S08-390: RNCC: 5 | RNVC: 2

28 Jun 2022

5340-01-702-3208
Mounting Bracket

017023208
12611016: RNCC: 3 | RNVC: 2
12611016: RNCC: 5 | RNVC: 2

28 Jun 2022

5340-01-702-3450
Mounting Bracket

017023450
12609162: RNCC: 3 | RNVC: 2
12609162: RNCC: 5 | RNVC: 2

29 Jun 2022

5340-01-701-4336
Loop Clamp

017014336
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D21-33N: RNCC: 3 | RNVC: 2

17 May 2022

5340-01-700-3662
Grooved Clamp Coupling

017003662
110585: RNCC: 3 | RNVC: 2

24 Mar 2022

5340-01-701-2762
Mounting Bracket

017012762
77A580873G1-C201: RNCC: 3 | RNVC: 2
77A580873G1: RNCC: D | RNVC: 9

6 May 2022

5340-01-701-3369
Rigid Connecting Link

017013369
167-7569488 PC NO 94: RNCC: 3 | RNVC: 2
SP002107 PC NO 60: RNCC: 5 | RNVC: 2
167-7569488: RNCC: D | RNVC: 9

11 May 2022

5340-01-700-2752
Loop Clamp

017002752
4524608: RNCC: 3 | RNVC: 2

22 Mar 2022

5340-01-701-2492
Manual Control Handle

017012492
6522K820: RNCC: 3 | RNVC: 2
11027D4031: RNCC: 7 | RNVC: 2

5 May 2022

5340-01-701-3015
Mounting Plate

017013015
636E004-247: RNCC: 3 | RNVC: 2
636E004: RNCC: D | RNVC: 9

9 May 2022

5340-01-701-3010
Loop Clamp

017013010
636E004-232: RNCC: 3 | RNVC: 2
636E004: RNCC: D | RNVC: 9

9 May 2022

5340-01-700-1744
Sensor Exhaust Screen

017001744
10088662: RNCC: 3 | RNVC: 2

19 Mar 2022

5340-01-702-0246
Access Cover

017020246
12617809: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-1853
Utility Access Door

017001853
1204362: RNCC: 3 | RNVC: 2

21 Mar 2022

5340-01-702-3761
Retaining Clip

017023761
187059-1: RNCC: 3 | RNVC: 2

30 Jun 2022

5340-01-702-1813
Block Clamp

017021813
270T0004-292: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-701-2644
Retaining Strap

017012644
5-19-15222: RNCC: 3 | RNVC: 2

6 May 2022

5340-01-702-2504
Block Clamp

017022504
65B80254-156: RNCC: 3 | RNVC: 2

23 Jun 2022

5340-01-702-2471
Utility Access Door

017022471
CC84989-001: RNCC: 3 | RNVC: 2

23 Jun 2022

5340-01-701-2869
Thumb Latch

017012869
CC49481-001: RNCC: 3 | RNVC: 2
1406A51: RNCC: 5 | RNVC: 2
CC49481: RNCC: 7 | RNVC: 2

9 May 2022

5340-01-700-2874
Mounting Bracket

017002874
4536891: RNCC: 3 | RNVC: 2
4536891-EDFP: RNCC: D | RNVC: 9

22 Mar 2022

5340-01-663-3325
Loop Clamp

016633325
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT6SH: RNCC: 3 | RNVC: 2

5 May 2017

5340-01-680-6093
Safety Cable Kit

016806093
SAE-AS4536: RNCC: 3 | RNVC: 1
AS3618-0218K: RNCC: 3 | RNVC: 2
AS3618-02-18K: RNCC: 3 | RNVC: 2

13 May 2019

5340-01-650-0940
Butt Hinge Leaf

016500940
MS20001PXA5-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

18 Nov 2015

5340-01-700-8159
Mounting Bracket

017008159
5802300183: RNCC: 3 | RNVC: 2

14 Apr 2022

5340-01-701-6764
Leakproof Seal Plug

017016764
113T1821-24: RNCC: 3 | RNVC: 2

23 Jan 2023

5340-01-702-4699
Loop Clamp

017024699
AS21919WDG20Y: RNCC: 3 | RNVC: 2
MS21919WDG20Y: RNCC: 5 | RNVC: 9

8 Jul 2022

5340-01-672-4378
Loop Clamp

016724378
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-26N: RNCC: 3 | RNVC: 2

2 May 2018

5340-01-504-0429
Loop Clamp

015040429
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C11Z: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-01-701-8637
Access Cover

017018637
184131: RNCC: 3 | RNVC: 2

14 Jun 2022

5340-01-702-8266
Bow Handle

017028266
HA15-02: RNCC: 3 | RNVC: 2

1 Aug 2022

5340-01-702-9532
Extension Drawer Slide

017029532
434-16: RNCC: 3 | RNVC: 2
12610788: RNCC: 7 | RNVC: 2

9 Aug 2022

5340-01-700-8604
Swivel Caster

017008604
8601985: RNCC: 3 | RNVC: 2
4.05109.939 MTG61 BRK3: RNCC: 5 | RNVC: 9

18 Apr 2022

5340-01-701-9735
Access Cover

017019735
12617661: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9770
Mounting Bracket

017019770
12617521: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-8772
Spacing Threaded Standoff

017028772
CB3001AA3-8HP750: RNCC: 3 | RNVC: 2
CB3001: RNCC: D | RNVC: 9

3 Aug 2022

5340-01-700-8620
Access Cover

017008620
595-8544603-PN-A4: RNCC: 3 | RNVC: 2
H684-8001-PN-A4: RNCC: 5 | RNVC: 2

18 Apr 2022

5340-01-699-8405
Access Cover

016998405
334/H4566: RNCC: 3 | RNVC: 2

1 Mar 2022

5340-01-701-7903
Mounting Bracket

017017903
930-65633: RNCC: 3 | RNVC: 1

8 Jun 2022

5340-01-701-9132
Handle Grip

017019132
1TD1355D10012-1001: RNCC: 3 | RNVC: 2

15 Jun 2022

5340-01-699-8997
Angle Bracket

016998997
ST9M580V105: RNCC: 3 | RNVC: 2
ST9M580V105: RNCC: 3 | RNVC: 2
ST9M580V105: RNCC: 7 | RNVC: 2

4 Mar 2022

5340-01-700-8849
Mounting Bracket

017008849
123CS11231-12: RNCC: 3 | RNVC: 2
123CS11231: RNCC: D | RNVC: 9

19 Apr 2022

5340-01-700-8592
Mounting Bracket

017008592
595-8544603-PN-16: RNCC: 3 | RNVC: 2
H684-8001-PN-16: RNCC: 5 | RNVC: 2

18 Apr 2022

5340-01-700-8075
Threaded Rod End

017008075
104673-2: RNCC: 3 | RNVC: 2

14 Apr 2022

5340-01-699-7979
Mounting Plate

016997979
1700292481: RNCC: 3 | RNVC: 2

25 Feb 2022

5340-01-702-9787
Mounting Plate

017029787
5-13-13690-1: RNCC: 3 | RNVC: 2

10 Aug 2022

5340-01-701-9792
Mounting Bracket

017019792
12617763: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9825
Mounting Bracket

017019825
12617907: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-9355
Mounting Bracket

017029355
12648680: RNCC: 3 | RNVC: 2

8 Aug 2022

5340-01-702-8672
Spacing Threaded Standoff

017028672
SS-7202-440-12: RNCC: 3 | RNVC: 2

3 Aug 2022

5340-01-702-8674
Mounting Plate

017028674
70216-02408-114: RNCC: 3 | RNVC: 2
70216-02408: RNCC: D | RNVC: 9

3 Aug 2022

5340-01-699-8285
Cushioning Pad

016998285
1700292549: RNCC: 3 | RNVC: 2

1 Mar 2022

5340-01-611-1988
General Purpose Resilient Mount

016111988
3968298: RNCC: 1 | RNVC: 2
MSI22011436: RNCC: 3 | RNVC: 2
BCA1193KT: RNCC: 5 | RNVC: 2
3968298: RNCC: 5 | RNVC: 9

7 Sep 2012

5340-01-700-7358
Mounting Bracket

017007358
4104000140: RNCC: 3 | RNVC: 2

11 Apr 2022

5340-01-702-7898
Mounting Bracket

017027898
12613625: RNCC: 3 | RNVC: 2
12613625: RNCC: 5 | RNVC: 2

28 Jul 2022

5340-01-701-7666
Loop Clamp

017017666
TA0830032PH2526: RNCC: 3 | RNVC: 2

7 Jun 2022

5340-01-701-8044
Cushioning Pad

017018044
MAN047: RNCC: 3 | RNVC: 2

9 Jun 2022

5340-01-701-8042
Support Hook

017018042
JAP12KHANDLE-CLIP-PS: RNCC: 3 | RNVC: 2

9 Jun 2022

5340-01-618-7305
Angle Bracket Set

016187305
BL-16578-1: RNCC: 3 | RNVC: 2
BL16578-1: RNCC: 3 | RNVC: 2

3 May 2013

5340-00-619-0695
Butt Hinge Leaf

006190695
MS20001PH6-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PH6-7200: RNCC: 5 | RNVC: 1
MS20001PH6-650: RNCC: 5 | RNVC: 9
MS20001H6-200: RNCC: 5 | RNVC: 9
MS20001X6-450: RNCC: 5 | RNVC: 9
MS20001PY6-300: RNCC: C | RNVC: 1
209-030-203-46: RNCC: C | RNVC: 1
MS20001PH6-0250: RNCC: C | RNVC: 1
MS20001PH6-1675: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-361-3605
Catch Strike

013613605
M85731/1-11C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
M85731/1-11C: RNCC: 5 | RNVC: 1
MIL-F-85731: RNCC: 5 | RNVC: 9
MS14108-11C: RNCC: 5 | RNVC: 9
5340PL0850809: RNCC: 6 | RNVC: 9
5340PL1820610: RNCC: 6 | RNVC: 9

15 Jul 1992

5340-01-369-0306
Spacing Threaded Standoff

013690306
8756-SS-2520-7: RNCC: 3 | RNVC: 2
8756SS1 4-20-7: RNCC: 5 | RNVC: 9
8756SS1 4-20-7: RNCC: 5 | RNVC: 9

13 Dec 1992

5340-01-207-7203
Electrical-Mechanical Equipment Post

012077203
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D40: RNCC: 3 | RNVC: 2

4 May 1985

5340-00-731-9611
Loop Clamp

007319611
NASM21334: RNCC: 3 | RNVC: 1
MS21334-34: RNCC: 3 | RNVC: 2
5340007319611: RNCC: 5 | RNVC: 9
MS21334-34: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-01-352-1252
Electrical-Mechanical Equipment Post

013521252
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A4E22: RNCC: 3 | RNVC: 2

19 Jan 1992

5340-01-683-0291
Crank Handle

016830291
12712049: RNCC: 3 | RNVC: 2
113018C1012-0: RNCC: 5 | RNVC: 2

5 Sep 2019

5340-01-606-6549
Spring Tension Clip

016066549
2310026: RNCC: 3 | RNVC: 2
659A4891-3: RNCC: 5 | RNVC: 2

22 May 2012

5340-01-058-9143
Clip

010589143
5K8451: RNCC: 3 | RNVC: 2
5K-8451: RNCC: 5 | RNVC: 2

4 Apr 1978

5340-00-480-9080
Loop Clamp

004809080
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D32-32N: RNCC: 3 | RNVC: 2
NAS1702D32-32N: RNCC: C | RNVC: 1

14 Jun 1974

5340-00-222-8562
Loop Clamp

002228562
3038-9012PC4: RNCC: 3 | RNVC: 2
SMB185786-3: RNCC: 3 | RNVC: 2
SCB176347-3: RNCC: 3 | RNVC: 2
842967-4: RNCC: 3 | RNVC: 2
842967PC4: RNCC: 3 | RNVC: 2
6722994: RNCC: 3 | RNVC: 2
140-38: RNCC: 3 | RNVC: 2
50779G1: RNCC: 3 | RNVC: 2
6722994: RNCC: 3 | RNVC: 2
1949-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-480-8860
Retaining Strap

004808860
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D20W54N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-480-9945
Loop Clamp

004809945
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D20-49N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-915-2368
Rod End Locking Retainer

009152368
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K5C: RNCC: 3 | RNVC: 2
NAS1193-5C: RNCC: 5 | RNVC: 9
AEC 004586: RNCC: 5 | RNVC: 9
AEC 004586: RNCC: 5 | RNVC: 9
5342PL1352847: RNCC: 6 | RNVC: 9

6 Jul 1966

5340-01-699-5648
Detent Plunger

016995648
11583598: RNCC: 3 | RNVC: 2

9 Feb 2022

5340-01-700-0312
Spring Tension Clip

017000312
L3022244-009: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-448-7841
Instrument Mounting Clamp

014487841
7579182-001: RNCC: 3 | RNVC: 2
7579182: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-01-697-9844
Loop Clamp

016979844
30-302-2D13J25: RNCC: 3 | RNVC: 2
30-302-2D13J25: RNCC: 5 | RNVC: 2
30-302-2D13J25: RNCC: 5 | RNVC: 2
30-302-2D13J25: RNCC: 5 | RNVC: 2
30-302-2D13J25: RNCC: 5 | RNVC: 2

21 Oct 2021

5340-01-699-8098
Port Lock

016998098
SVE25GV: RNCC: 3 | RNVC: 2

28 Feb 2022

5340-01-700-5444
Doorstop

017005444
262019-1: RNCC: 3 | RNVC: 2

1 Apr 2022

5340-01-701-5476
Access Cover

017015476
341323G1: RNCC: 3 | RNVC: 2

23 May 2022

5340-01-701-3739
Dust And Moisture Seal Protective Cover

017013739
2663180: RNCC: 3 | RNVC: 2

13 May 2022

5340-01-701-5671
Strap Fastener Loop

017015671
2A1849-9: RNCC: 3 | RNVC: 2

24 May 2022

5340-01-706-6671
Pawl Fastener

017066671
24-20-912-35: RNCC: 3 | RNVC: 2
11055A24: RNCC: 5 | RNVC: 2
608-8873413ITEM11: RNCC: D | RNVC: 9

12 Dec 2022

5340-01-677-0021
Nut And Bolt Head Protective Cap

016770021
02701293: RNCC: 3 | RNVC: 2
3991345: RNCC: 3 | RNVC: 2
12600886: RNCC: 5 | RNVC: 2

21 Nov 2018

5340-01-459-4251
Spacing Threaded Standoff

014594251
NAS1831: RNCC: 3 | RNVC: 1
NAS1831H5C12: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-01-658-6702
Dust And Moisture Seal Boot

016586702
3375251: RNCC: 3 | RNVC: 2
337525-1: RNCC: 3 | RNVC: 2
3375251-1: RNCC: 5 | RNVC: 9

11 Oct 2016

5340-01-668-4036
Loop Clamp

016684036
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C3-13SW: RNCC: 3 | RNVC: 2

21 Nov 2017

5340-01-683-8369
Butt Hinge Leaf

016838369
MS20001XA5-950: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

9 Oct 2019

5340-01-493-9761
Spacing Threaded Standoff

014939761
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6F08: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-01-629-4575
Retaining Strap

016294575
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-8N: RNCC: 3 | RNVC: 2

1 Jul 2014

5340-01-645-9650
Dust And Moisture Seal Protective Plug

016459650
NAS837: RNCC: 3 | RNVC: 1
NAS837-10: RNCC: 3 | RNVC: 2

7 Jul 2015

5340-01-624-5625
Angle Bracket

016245625
SAE-AS9602: RNCC: 3 | RNVC: 1
MS9602-130: RNCC: 3 | RNVC: 2
MS9602-130: RNCC: 3 | RNVC: 9

8 Jan 2014

5340-01-624-6390
Angle Bracket

016246390
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-187: RNCC: 3 | RNVC: 2
MS9600-187: RNCC: 3 | RNVC: 9

10 Jan 2014

5340-01-666-7853
Angle Bracket

016667853
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-435: RNCC: 3 | RNVC: 2
MS9601-435: RNCC: 3 | RNVC: 9

20 Sep 2017

5340-01-630-4189
Bow Handle

016304189
927299-0037: RNCC: 3 | RNVC: 2
9218-4.50-2520A-5: RNCC: 3 | RNVC: 2

4 Aug 2014

5340-01-661-0978
Utility Access Door

016610978
0405-9335: RNCC: 3 | RNVC: 2
04-20284: RNCC: 3 | RNVC: 2

16 Feb 2017

5340-01-661-3631
Retaining Strap

016613631
NASM85449/3: RNCC: 3 | RNVC: 1
M85449/3-48: RNCC: 3 | RNVC: 2

28 Feb 2017

5340-01-631-4084
Loop Clamp

016314084
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D4-9NW: RNCC: 3 | RNVC: 2

12 Sep 2014

5340-01-616-2864
Cushioning Pad

016162864
510-754: RNCC: 3 | RNVC: 2
DZPG-HTA19PI: RNCC: 5 | RNVC: 2
510-662: RNCC: 5 | RNVC: 9

7 Feb 2013

5340-01-204-5678
Spring Tension Clip

012045678
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B077-08C: RNCC: 3 | RNVC: 2

28 Mar 1985

5340-01-609-1019
Angle Bracket

016091019
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-072: RNCC: 3 | RNVC: 2
MS9593-072: RNCC: 3 | RNVC: 9
MS9593-072: RNCC: 5 | RNVC: 9

16 Jul 2012

5340-01-607-6736
Retaining Strap

016076736
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D11W37N: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-01-601-8658
Bow Handle

016018658
NASM39087: RNCC: 3 | RNVC: 1
MS39087-306AN: RNCC: 3 | RNVC: 2
MS39087-306AN: RNCC: 5 | RNVC: 9

26 Jan 2012

5340-00-456-2460
Spring Tension Clip

004562460
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B080-14C: RNCC: 3 | RNVC: 2

28 Apr 1969

NSN 5340-01-611-8130 016118130 PADLOCK SET

5340-01-611-8130
Padlock Set

016118130
AA59486-2AS06LS12S: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1

26 Sep 2012

5340-01-588-5965
Loop Clamp

015885965
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D13T: RNCC: 3 | RNVC: 2

25 Sep 2010

5340-01-371-6045
Loop Clamp

013716045
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-13T: RNCC: 3 | RNVC: 2

19 Feb 1993

5340-01-367-8147
Butt Hinge

013678147
AA55593-12A: RNCC: 2 | RNVC: 2
AA55593-12-A: RNCC: 2 | RNVC: 2
A-A-55593: RNCC: 4 | RNVC: 1
MS35826-12A: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-01-707-7964
Kit Seal

017077964
87298A1: RNCC: 3 | RNVC: 2

23 Feb 2023

5340-01-707-5786
Flush Catch

017075786
A20014-2: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-707-5790
Metal Grille

017075790
L-10: RNCC: 3 | RNVC: 2
L-10: RNCC: 5 | RNVC: 2

9 Feb 2023

5340-01-698-3473
Grooved Clamp Coupling

016983473
89533K: RNCC: 3 | RNVC: 2
89533K: RNCC: 5 | RNVC: 2

10 Nov 2021

5340-01-707-4749
Blank Panel

017074749
7-511B25025-57: RNCC: 3 | RNVC: 2

3 Feb 2023

5340-01-707-5142
Cushioning Pad

017075142
24572-153: RNCC: 3 | RNVC: 2

7 Feb 2023

5340-01-707-5184
Rod End Clevis

017075184
74693-1: RNCC: 3 | RNVC: 2

7 Feb 2023

5340-01-707-4061
Mounting Bracket

017074061
74A411571-2031: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-706-5010
Mounting Bracket

017065010
593-2536: RNCC: 3 | RNVC: 2

30 Nov 2022

5340-01-707-7836
Dust And Moisture Seal Protective Cap

017077836
DH-OPCR-F725: RNCC: 3 | RNVC: 2

22 Feb 2023

5340-01-707-5622
Dust And Moisture Seal Protective Cover

017075622
81-844492-000: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-705-6527
Loop Clamp

017056527
9270M40P12: RNCC: 3 | RNVC: 2

30 Sep 2022

5340-01-707-3518
Door Handle Unit

017073518
ND10S: RNCC: 3 | RNVC: 2

28 Jan 2023

5340-01-528-4232
Access Cover

015284232
11581594: RNCC: 3 | RNVC: 2
777.13.004: RNCC: 5 | RNVC: 2

11 Mar 2005

5340-01-707-3767
Mounting Bracket

017073767
117-00608-00: RNCC: 3 | RNVC: 2

30 Jan 2023

5340-01-707-5463
Door Hook

017075463
7-611115155-005: RNCC: 3 | RNVC: 2

8 Feb 2023

5340-01-707-5549
Utility Resilient Mount

017075549
J-7764-31: RNCC: 3 | RNVC: 2

8 Feb 2023

5340-01-705-8820
Loop Clamp

017058820
10-0744: RNCC: 3 | RNVC: 2

19 Oct 2022

5340-01-705-6891
Loop Clamp

017056891
1153M64G28: RNCC: 3 | RNVC: 2

4 Oct 2022

5340-01-706-1447
Utility Resilient Mount

017061447
WR28-600-08-D-M: RNCC: 3 | RNVC: 2

3 Nov 2022

5340-01-706-4523
Angle Bracket

017064523
337659-40: RNCC: 3 | RNVC: 2

28 Nov 2022

5340-01-706-4519
Multiple Angle Bracket

017064519
ZEV-MW.K-STD-PRO-PLUS-GEN4: RNCC: 3 | RNVC: 2

28 Nov 2022

5340-01-706-4881
Retaining Clip

017064881
342-2134: RNCC: 3 | RNVC: 2

30 Nov 2022

5340-01-706-4189
Utility Resilient Mount

017064189
GA-A002: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-706-5081
Stand Base

017065081
362-0734: RNCC: 3 | RNVC: 2

1 Dec 2022

5340-01-707-7384
Runner

017077384
5452076-070: RNCC: 3 | RNVC: 2

21 Feb 2023

5340-01-706-5384
Mounting Bracket

017065384
590-1223: RNCC: 3 | RNVC: 2

5 Dec 2022

5340-01-707-0040
Buckle

017070040
H2015: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-706-9976
Dust And Moisture Seal Protective Cap-Plug

017069976
PE6108: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-706-8654
Butt Hinge

017068654
414S3576-22: RNCC: 3 | RNVC: 2

27 Dec 2022

5340-01-706-8542
Dust And Moisture Seal Protective Cover

017068542
04D0056-201: RNCC: 3 | RNVC: 2

23 Dec 2022

5340-01-707-0070
Bumper

017070070
G2027: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-691-7719
Suction Cup

016917719
IF145-361-2: RNCC: 3 | RNVC: 9
0350624326002: RNCC: 5 | RNVC: 2

28 Oct 2020

5340-01-707-1250
Shimmy Damper

017071250
06092-45V205-1: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-706-8923
Mounting Bracket

017068923
599-5900: RNCC: 3 | RNVC: 2

29 Dec 2022

5340-01-706-8934
Mounting Bracket

017068934
594-3402: RNCC: 3 | RNVC: 2

29 Dec 2022

5340-01-706-9063
Access Cover

017069063
T02-2049-000: RNCC: 3 | RNVC: 2
T02-2049-000: RNCC: 5 | RNVC: 2

3 Jan 2023

5340-01-708-1366
Extension Drawer Slide

017081366
150QD-22: RNCC: 3 | RNVC: 2
150QD-22-P: RNCC: 3 | RNVC: 2

16 Mar 2023

5340-01-706-9757
Loop Clamp

017069757
M85049/93-06: RNCC: 3 | RNVC: 2

6 Jan 2023

5340-00-453-6241
Webbing Strap

004536241
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10EJ12: RNCC: 3 | RNVC: 2

16 Apr 1969

5340-01-202-3002
Spring Tension Clip

012023002
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-098-22C: RNCC: 3 | RNVC: 2

28 Feb 1985

5340-01-706-6977
Rigid Connecting Link

017066977
74780-1: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-705-5216
Screw Thread Insert And Tool Assortment

017055216
59101: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-708-0047
Utility Resilient Mount

017080047
WR12-806-03DM: RNCC: 3 | RNVC: 2

9 Mar 2023

5340-01-706-8199
Air Inlet-Outlet Frame

017068199
6674231: RNCC: 3 | RNVC: 2

21 Dec 2022

5340-01-707-9126
Extension Drawer Slide

017079126
PTC11284964-KD: RNCC: 3 | RNVC: 2
PTC11284964: RNCC: D | RNVC: 9

3 Mar 2023

5340-01-706-6116
Mounting Bracket

017066116
593-6411: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-707-8139
Synchro Clamp

017078139
4065488: RNCC: 3 | RNVC: 2

24 Feb 2023

5340-01-707-8506
Detent Plunger

017078506
810-3-099: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-707-8508
Nut And Bolt Head Protective Cap

017078508
V15/810-3-102: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-706-6212
Mounting Bracket

017066212
611-7734: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-706-6251
Mounting Bracket

017066251
610-8954: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-707-8878
Access Door Hinge

017078878
96-99-248: RNCC: 3 | RNVC: 2
N-40417-J: RNCC: D | RNVC: 9

1 Mar 2023

5340-01-200-2512
Electrical-Mechanical Equipment Post

012002512
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C14B02: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-01-205-3551
Mounting Bracket

012053551
SAE-AS9551: RNCC: 3 | RNVC: 1
MS9551-019: RNCC: 3 | RNVC: 2
MS9551-019: RNCC: 3 | RNVC: 9
MS9551-019: RNCC: 5 | RNVC: 9

7 Apr 1985

5340-00-834-8790
Spring Tension Clip

008348790
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B020-06C: RNCC: 3 | RNVC: 2

30 Nov 1966

5340-01-708-8810
Double Angle Bracket

017088810
AB022U: RNCC: 3 | RNVC: 2

28 Apr 2023

5340-01-708-9356
Angle Bracket

017089356
12647355: RNCC: 3 | RNVC: 2

2 May 2023

5340-01-708-9588
Access Cover

017089588
EB218001123: RNCC: 3 | RNVC: 2
754-7068538-43: RNCC: C | RNVC: 1
754-7068538: RNCC: D | RNVC: 9

3 May 2023

5340-01-708-9815
Loop Clamp

017089815
212T3407-1: RNCC: 3 | RNVC: 1

4 May 2023

5340-01-709-0238
Mounting Bracket

017090238
13079113: RNCC: 3 | RNVC: 2

5 May 2023

5340-01-709-0436
Angle Bracket

017090436
78207-03024-131: RNCC: 3 | RNVC: 2

8 May 2023

5340-01-708-6368
Access Cover

017086368
156-B5597: RNCC: 3 | RNVC: 2
18272-ITEM-8: RNCC: C | RNVC: 1
18272: RNCC: D | RNVC: 9

14 Apr 2023

5340-01-709-1398
Mounting Plate

017091398
12644543-002: RNCC: 3 | RNVC: 2
12644543-002: RNCC: 5 | RNVC: 2

12 May 2023

5340-00-443-5925
Loop Clamp

004435925
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-9N: RNCC: 3 | RNVC: 2

11 Apr 1969

5340-00-436-7128
Spring Tension Clip

004367128
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B028-05C: RNCC: 3 | RNVC: 2

5 Sep 1969

5340-00-443-5898
Strap Webbing Assembly

004435898
NAS1383: RNCC: 3 | RNVC: 1
NAS1383H10H40R: RNCC: 3 | RNVC: 2

4 Apr 1969

5340-01-195-6218
Spring Tension Clip

011956218
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B018-02N: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-01-708-1889
Spacing Threaded Standoff

017081889
M2141-3005-SMODL=6-12-PL: RNCC: 3 | RNVC: 2
13055865-2: RNCC: 7 | RNVC: 2
13055865: RNCC: D | RNVC: 9

21 Mar 2023

5340-01-708-3117
Door Handle

017083117
2000223: RNCC: 3 | RNVC: 2
2000223-1: RNCC: C | RNVC: 1
2000222: RNCC: D | RNVC: 9

29 Mar 2023

5340-01-615-7399
Dust And Moisture Seal Protective Cap

016157399
NAS837: RNCC: 3 | RNVC: 1
NAS837-8: RNCC: 3 | RNVC: 2

22 Jan 2013

5340-01-708-4370
Spacing Threaded Standoff

017084370
SS5182-20.0: RNCC: 3 | RNVC: 2

5 Apr 2023

5340-01-708-0862
Grooved Clamp Coupling

017080862
3221-9914-002: RNCC: 3 | RNVC: 2

15 Mar 2023

5340-01-708-0535
Mounting Plate

017080535
106493DV: RNCC: 3 | RNVC: 2

13 Mar 2023

5340-01-707-9125
Handwheel

017079125
C928-015: RNCC: 3 | RNVC: 2
C928-015: RNCC: 5 | RNVC: 2
C928-015: RNCC: 5 | RNVC: 9

3 Mar 2023

5340-01-707-8606
Mounting Bracket

017078606
566-6985428-A2: RNCC: 3 | RNVC: 2
H621-0104-A2: RNCC: C | RNVC: 1
566-6985428: RNCC: D | RNVC: 9

27 Feb 2023

5340-01-707-8133
Strapping

017078133
771993: RNCC: 3 | RNVC: 2

23 Feb 2023

5340-01-707-8056
Manual Control Lever

017078056
AT220224: RNCC: 3 | RNVC: 2

23 Feb 2023

5340-01-707-6932
Dust And Moisture Seal Protective Cap

017076932
279314: RNCC: 3 | RNVC: 2

16 Feb 2023

5340-01-707-6953
Bumper

017076953
751-7068532-PN-121: RNCC: 3 | RNVC: 2
H8410307A-121: RNCC: C | RNVC: 1
H841-0307-PN-121: RNCC: C | RNVC: 1

16 Feb 2023

5340-01-707-7195
Rigid Connecting Link

017077195
N9836: RNCC: 3 | RNVC: 2

17 Feb 2023

5340-01-707-7271
Spring Tension Clip

017077271
J4021S: RNCC: 3 | RNVC: 2
1Q565: RNCC: 5 | RNVC: 2

17 Feb 2023

5340-01-707-5011
Threaded Rod End

017075011
106-20620: RNCC: 3 | RNVC: 2
20625: RNCC: D | RNVC: 9

6 Feb 2023

5340-01-707-4733
Access Cover

017074733
CC14102-101: RNCC: 3 | RNVC: 2
CC14102: RNCC: D | RNVC: 9

3 Feb 2023

5340-01-707-5688
Spacing Threaded Standoff

017075688
2051-440-ALMODL.276-9: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-707-4898
Mounting Bracket

017074898
HAN 694-1: RNCC: 3 | RNVC: 2
A-445-26 ITEM 21: RNCC: 5 | RNVC: 2
A-445-26: RNCC: D | RNVC: 9

6 Feb 2023

5340-01-707-6445
Threaded Rod End

017076445
106-20621: RNCC: 3 | RNVC: 2
20625: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-707-6563
Mounting Plate

017076563
5HL11309-103: RNCC: 3 | RNVC: 2

14 Feb 2023

5340-01-707-6623
Loop Clamp

017076623
30-302-2D10J18: RNCC: 3 | RNVC: 2
30-302-2D10J18: RNCC: 5 | RNVC: 2
30-302-2D10J18: RNCC: 5 | RNVC: 2
30-302-2D10J18: RNCC: 5 | RNVC: 2
30-302-2D10J18: RNCC: 5 | RNVC: 2
30-302: RNCC: D | RNVC: 9

15 Feb 2023

5340-01-707-1923
Multiple Angle Bracket

017071923
255-8357121-248: RNCC: 3 | RNVC: 2
H776-0551-248: RNCC: 5 | RNVC: 2
255-8357121: RNCC: D | RNVC: 9

20 Jan 2023

5340-01-707-3416
Metal Grille

017073416
2933164-101: RNCC: 3 | RNVC: 2

28 Jan 2023

5340-01-707-3225
Manual Control Handle

017073225
845-8616942 ITEM NO-27: RNCC: 3 | RNVC: 2
845-8616942: RNCC: D | RNVC: 9

27 Jan 2023

5340-01-707-3347
Thumb Latch

017073347
12193-2190-01: RNCC: 3 | RNVC: 2

27 Jan 2023

5340-01-706-6758
Mounting Plate

017066758
5915626-27: RNCC: 3 | RNVC: 2
162-20738-01: RNCC: 5 | RNVC: 2

12 Dec 2022

5340-01-706-8290
Hold Open Assembly

017068290
0423-2507: RNCC: 3 | RNVC: 2
P0002844-117 SH 3 FN 3: RNCC: 5 | RNVC: 2

21 Dec 2022

5340-01-706-6306
Retaining Strap

017066306
3362013-16: RNCC: 3 | RNVC: 2
3362013: RNCC: D | RNVC: 9

9 Dec 2022

5340-01-706-8757
Mounting Plate

017068757
12638762: RNCC: 3 | RNVC: 2
12638633: RNCC: D | RNVC: 9

28 Dec 2022

5340-01-706-7929
Blank Panel

017067929
5915626-3: RNCC: 3 | RNVC: 2
153-20737-03: RNCC: 5 | RNVC: 2

19 Dec 2022

5340-01-707-0053
Catch Strike

017070053
12638846: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-707-0166
Utility Access Door

017070166
PD2005-1/72 INCHES WIDE: RNCC: 3 | RNVC: 2
PD2005-1: RNCC: 5 | RNVC: 2

10 Jan 2023

5340-01-707-0033
Access Cover

017070033
13074084: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-706-9943
Snap-In Plain Standoff

017069943
12193-7635-01: RNCC: 3 | RNVC: 2
12193-7635: RNCC: D | RNVC: 9

9 Jan 2023

5340-01-707-0649
Loop Clamp

017070649
9NG0012D23F: RNCC: 3 | RNVC: 2
40005D23FS: RNCC: 5 | RNVC: 2
TA0220055DC23FK: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

12 Jan 2023

5340-01-706-4954
Mounting Bracket

017064954
12609967: RNCC: 3 | RNVC: 2
12609967: RNCC: C | RNVC: 1

30 Nov 2022

5340-01-706-5426
Loop Clamp

017065426
AS21919WCH35Y: RNCC: 3 | RNVC: 2
AS21919: RNCC: D | RNVC: 9

5 Dec 2022

5340-01-706-5473
Bumper

017065473
13107425: RNCC: 3 | RNVC: 2

5 Dec 2022

5340-01-706-6835
Mounting Bracket

017066835
59430-1: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-706-6760
Mounting Plate

017066760
5915626-28: RNCC: 3 | RNVC: 2
162-20738-02: RNCC: 5 | RNVC: 2

12 Dec 2022

5340-01-706-6875
Mounting Bracket

017066875
3370294-3: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-706-7419
Pin Removable Head

017067419
5143928-686: RNCC: 3 | RNVC: 2
5143928: RNCC: D | RNVC: 9

15 Dec 2022

5340-01-706-7651
Retaining Clip

017067651
7662461: RNCC: 3 | RNVC: 2

16 Dec 2022

5340-01-706-7799
Retaining Strap

017067799
7082747: RNCC: 3 | RNVC: 2

17 Dec 2022

5340-01-706-7672
Mounting Plate

017067672
9-2-4927: RNCC: 3 | RNVC: 2

16 Dec 2022

5340-01-706-7848
Spring Tension Clip

017067848
5266374: RNCC: 3 | RNVC: 2

19 Dec 2022

5340-01-706-7775
Mounting Plate

017067775
9-2-4928: RNCC: 3 | RNVC: 2

17 Dec 2022

5340-01-706-8822
Access Cover

017068822
140289-101: RNCC: 3 | RNVC: 2

28 Dec 2022

5340-01-706-8226
Shaft Collar

017068226
983-9041-443: RNCC: 3 | RNVC: 2

21 Dec 2022

5340-01-706-8523
Retaining Strap

017068523
5266653-329: RNCC: 3 | RNVC: 2

23 Dec 2022

5340-01-706-9948
Extension Drawer Slide

017069948
8908B34: RNCC: 3 | RNVC: 2
17-61323: RNCC: 7 | RNVC: 2

9 Jan 2023

5340-01-707-0978
Spacing Threaded Standoff

017070978
4546-440-SS: RNCC: 3 | RNVC: 2

17 Jan 2023

Load More Results