What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 22 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 22 of 1045

5340-00-811-3025
Loop Clamp

008113025
MS9025-03: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
959E461-035: RNCC: 5 | RNVC: 1
1102G36-003: RNCC: 5 | RNVC: 1
959E461-035: RNCC: 5 | RNVC: 9
1102G36-003: RNCC: 5 | RNVC: 9
4085T29P03: RNCC: 5 | RNVC: 9
5340PL0682807: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-619-6492
Dust And Moisture Seal Protective Cap-Plug

006196492
AS85049/138-20: RNCC: 3 | RNVC: 2
AS90376-10R: RNCC: 3 | RNVC: 9
133244: RNCC: 5 | RNVC: 1
025-460-000: RNCC: 5 | RNVC: 2
025-0460-000: RNCC: 5 | RNVC: 2
760002-4: RNCC: 5 | RNVC: 2
357-8275-009: RNCC: 5 | RNVC: 2
025-0460-00: RNCC: 5 | RNVC: 2
175681: RNCC: 5 | RNVC: 2
7007474: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-660-5248
Dust And Moisture Seal Protective Cap

006605248
MS25178-20: RNCC: 2 | RNVC: 2
MS25178: RNCC: 4 | RNVC: 1
8599098-008: RNCC: 5 | RNVC: 1
M85049/138-41A: RNCC: 5 | RNVC: 1
1219270-6: RNCC: 5 | RNVC: 1
EC-20: RNCC: 5 | RNVC: 1
EC-20: RNCC: 5 | RNVC: 1
91793369: RNCC: 5 | RNVC: 1
P10554: RNCC: 5 | RNVC: 1
AS85049-41: RNCC: 5 | RNVC: 1

1 Jan 1961

5340-00-788-8385
Nut And Bolt Retainer

007888385
NAS578: RNCC: 3 | RNVC: 1
NAS578-5B: RNCC: 3 | RNVC: 2
1B7483: RNCC: 5 | RNVC: 2
34072936-001: RNCC: 5 | RNVC: 2
951415-2: RNCC: 5 | RNVC: 2
3320-054RET: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-682-1991
Loop Clamp

006821991
MS9025-09: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
1102G36-009: RNCC: 5 | RNVC: 1
1102G36-009: RNCC: 5 | RNVC: 9
5340PL0843504: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-817-0912
Dust And Moisture Seal Protective Plug

008170912
RB15257-3: RNCC: 3 | RNVC: 2
NAS818-4: RNCC: 3 | RNVC: 2
NAS818-4: RNCC: 5 | RNVC: 2
ASP-4: RNCC: 5 | RNVC: 2
50068: RNCC: 5 | RNVC: 2
NAS818-4: RNCC: 5 | RNVC: 2
DS-920516: RNCC: 5 | RNVC: 2
29073: RNCC: 5 | RNVC: 2
P1000-4: RNCC: 5 | RNVC: 9
4120D588624: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-664-6732
Loop Clamp

006646732
C15109-4: RNCC: 3 | RNVC: 9
HP-14N: RNCC: 5 | RNVC: 2
310002-14: RNCC: 5 | RNVC: 2
57A5A182-14: RNCC: 5 | RNVC: 2
9147C5001-13: RNCC: 5 | RNVC: 2
NSA5536-14: RNCC: 5 | RNVC: 2
094411-0000: RNCC: 5 | RNVC: 2
54967-14: RNCC: 5 | RNVC: 2
R29LA013: RNCC: 5 | RNVC: 9
9147C5001-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-0766
Dust And Moisture Seal Protective Cap

008040766
NAS846: RNCC: 3 | RNVC: 1
NAS846-2A: RNCC: 3 | RNVC: 2
MILC5501TYPE6CLASSASIZE1-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-687-3223
Plug Button

006873223
NAS451: RNCC: 3 | RNVC: 1
NAS451-30: RNCC: 3 | RNVC: 2
NAS-451-30: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-817-0803
Snap Hook

008170803
NAS1282: RNCC: 3 | RNVC: 1
NAS1282B8: RNCC: 3 | RNVC: 2
NAS12808: RNCC: 5 | RNVC: 2
FIG125SIZE1-2: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-01-200-2515
Electrical-Mechanical Equipment Post

012002515
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C24: RNCC: 3 | RNVC: 2
8228-SS-632-7: RNCC: 5 | RNVC: 2
71011094020: RNCC: 5 | RNVC: 2
8228-SS-632-7: RNCC: 5 | RNVC: 9
NAS1786C06-24: RNCC: C | RNVC: 1
NAS1786C06-24: RNCC: C | RNVC: 1

31 Jan 1985

5340-00-582-2741
Padlock

005822741
MS35647-4: RNCC: 2 | RNVC: 2
MS35647: RNCC: 4 | RNVC: 1
A-A-1927 TY3: RNCC: 5 | RNVC: 1
2B62: RNCC: 5 | RNVC: 9
A-A-1927: RNCC: 5 | RNVC: 9
21B772: RNCC: 5 | RNVC: 9
FF-P-101: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-530-5352
Rod End Clevis

005305352
AN665-21L: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1
807138-00: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-429-2294
Loop Clamp

004292294
MS21122-7: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

28 Apr 1971

5340-00-594-7899
Angle Bracket

005947899
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-018: RNCC: 3 | RNVC: 2
MS9592-018: RNCC: 5 | RNVC: 9

8 Jan 1975

5340-00-515-0596
Loop Clamp

005150596
AN742F10: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MS21103-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-558-3003
Butt Hinge

005583003
MS20001P8-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
AN252-8A7100: RNCC: 5 | RNVC: 1
MS20001P8-7200: RNCC: 5 | RNVC: 1
MS20001PH8&650: RNCC: 5 | RNVC: 9
MS20001PH8-7200: RNCC: 5 | RNVC: 9
MS20001PH8-1400: RNCC: 5 | RNVC: 9
MS20001PH8-2450: RNCC: 5 | RNVC: 9
MS20001-8-0500: RNCC: 5 | RNVC: 9
MS20001-8-3206: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-531-7254
Loop Clamp

005317254
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D88: RNCC: 3 | RNVC: 2
AS7351D88: RNCC: 3 | RNVC: 9
AN735D88: RNCC: 5 | RNVC: 9
AN735D88: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-531-7275
Expansion Plug

005317275
A52420-21: RNCC: 2 | RNVC: 2
A-A-52420: RNCC: 4 | RNVC: 1
541538: RNCC: 5 | RNVC: 1
A-A-52420-21: RNCC: 5 | RNVC: 9
MS35648-21: RNCC: 5 | RNVC: 9
186984: RNCC: 5 | RNVC: 9
4251865: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-571-9612
Snap Hook

005719612
NAS1282: RNCC: 3 | RNVC: 1
NAS1282A16: RNCC: 3 | RNVC: 2

4 Dec 1974

5340-00-576-0780
Dust And Moisture Seal Protective Cap

005760780
NAS847: RNCC: 3 | RNVC: 1
12Z12139PC43: RNCC: 3 | RNVC: 2
NAS844-16: RNCC: 3 | RNVC: 2
8179172: RNCC: 3 | RNVC: 2
178D542P29: RNCC: 5 | RNVC: 2
178D542P29: RNCC: 5 | RNVC: 2
M5501/9-F16: RNCC: 5 | RNVC: 9
498: RNCC: 5 | RNVC: 9
831555-00: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-610-5044
Synchro Clamp

006105044
L2-1: RNCC: 3 | RNVC: 2
SM-C-805972: RNCC: 5 | RNVC: 9
SM-A-948054-2: RNCC: 5 | RNVC: 9
CP35-1-60-1: RNCC: 5 | RNVC: 9
2JC2905H01: RNCC: 5 | RNVC: 9
481-338-1: RNCC: 5 | RNVC: 9
SM-C-805972-1: RNCC: 5 | RNVC: 9
9147C5027: RNCC: 5 | RNVC: 9
134-00G1: RNCC: 5 | RNVC: 9
SM-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-597-0182
Loop Clamp

005970182
NASM21333: RNCC: 3 | RNVC: 1
MS21333-39: RNCC: 3 | RNVC: 2
MS21333-39: RNCC: 5 | RNVC: 9
5340005970182: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-597-9385
Loop Clamp

005979385
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122905: RNCC: 3 | RNVC: 2
6719788: RNCC: 5 | RNVC: 1
6719788: RNCC: 5 | RNVC: 1
MS122905: RNCC: 5 | RNVC: 9
5340PL0626852: RNCC: 6 | RNVC: 9
10117412: RNCC: 6 | RNVC: 9
MS1229-05: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-597-9411
Loop Clamp

005979411
MS9024-04: RNCC: 2 | RNVC: 2
MS9024: RNCC: 4 | RNVC: 1
NAS1715C5N: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-597-9410
Loop Clamp

005979410
AS21919WDF7: RNCC: 2 | RNVC: 2
AS21919WDF07: RNCC: 5 | RNVC: 1
JM44LC33WD7YN: RNCC: 5 | RNVC: 1
SAE-AS21919: RNCC: 5 | RNVC: 1
AS21919WDF07: RNCC: 5 | RNVC: 9
MS21919WDF7: RNCC: 5 | RNVC: 9
5340PL1728922: RNCC: 6 | RNVC: 9
5340PL0728158: RNCC: 6 | RNVC: 9
MS21919DF7: RNCC: C | RNVC: 1
MS21104D7: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-598-9859
Loop Clamp

005989859
MS9024-05: RNCC: 2 | RNVC: 2
MS9024: RNCC: 4 | RNVC: 1
5340005989859: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-598-8251
Angle Bracket

005988251
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743-12: RNCC: 3 | RNVC: 2
AN743-12: RNCC: 3 | RNVC: 9
AS7431: RNCC: 5 | RNVC: 1
AS7431: RNCC: 5 | RNVC: 9
AN743-12: RNCC: 5 | RNVC: 9
5340PL0845471: RNCC: 6 | RNVC: 9
015-2930-010: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-197-6734
Electrical-Mechanical Equipment Post

011976734
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5D48: RNCC: 3 | RNVC: 2

24 Dec 1984

5340-00-425-1380
Spring Tension Clip

004251380
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-115: RNCC: 3 | RNVC: 2
MILC24066-4: RNCC: 5 | RNVC: 9
M24066-4-115: RNCC: 5 | RNVC: 9
M24066/4-115: RNCC: C | RNVC: 1

4 May 1974

5340-00-543-3292
Retaining Strap

005433292
NASM760: RNCC: 3 | RNVC: 1
MS35140-8: RNCC: 3 | RNVC: 2
L10: RNCC: 5 | RNVC: 1
FF-S-760: RNCC: 5 | RNVC: 9
MS35140-8: RNCC: 5 | RNVC: 9
PTL10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-498-0571
Spring Tension Clip

004980571
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-012-06C: RNCC: 3 | RNVC: 2
10117379: RNCC: 6 | RNVC: 9

10 Oct 1969

5340-00-549-7060
Rim Latch

005497060
608-5530860 ITEM 7: RNCC: 3 | RNVC: 2
640-HL-1: RNCC: 5 | RNVC: 2
62-41-0311: RNCC: 5 | RNVC: 2
62-41-0311A: RNCC: 5 | RNVC: 2
H-CR-640-HL-1: RNCC: 5 | RNVC: 2
640HL1: RNCC: 5 | RNVC: 2
608-4775423 ITEM 8: RNCC: 5 | RNVC: 9
640HL1: RNCC: C | RNVC: 1
TYPE H-CR 640-N L-1: RNCC: C | RNVC: 1
178-5530860 ITEM 7: RNCC: C | RNVC: 1

15 Oct 1974

5340-00-527-2096
Loop Clamp

005272096
SAE-AS1553: RNCC: 3 | RNVC: 1
AS3257-13: RNCC: 3 | RNVC: 2
X218-13: RNCC: 3 | RNVC: 2
AS3257-13: RNCC: 5 | RNVC: 9
327B641P013: RNCC: 7 | RNVC: 2

1 Jan 1963

5340-00-407-3461
Angle Bracket

004073461
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-101: RNCC: 3 | RNVC: 2
MS9592-101: RNCC: 3 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 1
MS9592-101: RNCC: 5 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 9

10 Jul 1970

5340-00-455-2639
Loop Clamp

004552639
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K3N: RNCC: 3 | RNVC: 2

23 Apr 1969

5340-00-494-5640
Rod End Locking Retainer

004945640
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K28C: RNCC: 3 | RNVC: 2

16 Feb 1970

5340-00-481-8934
Dust And Moisture Seal Protective Cap

004818934
MS90376-14Y: RNCC: 2 | RNVC: 2
AS90376-14Y: RNCC: 5 | RNVC: 1
5D0377-14Y: RNCC: 5 | RNVC: 1
AS90376-14Y: RNCC: 5 | RNVC: 1
5D0377-14Y: RNCC: 5 | RNVC: 1
MS90376-14Y: RNCC: 5 | RNVC: 2
701-1912: RNCC: 5 | RNVC: 2
AS90376-14Y: RNCC: 5 | RNVC: 9
5340PL0798394: RNCC: 6 | RNVC: 9
4270-14Y: RNCC: C | RNVC: 1

18 Sep 1970

5340-00-492-2002
Retaining Strap

004922002
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24W62N: RNCC: 3 | RNVC: 2

2 Jul 1974

5340-00-720-6386
Plug Button

007206386
NAS451: RNCC: 3 | RNVC: 1
NAS451-8: RNCC: 3 | RNVC: 2
NAS-451-8: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-225-2875
Grooved Clamp Coupling

002252875
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-22B: RNCC: 3 | RNVC: 2
AS5355/1-22B: RNCC: 3 | RNVC: 9
8141A4M-688Z: RNCC: 5 | RNVC: 2
35H14-3-688-1: RNCC: 5 | RNVC: 2
57464-688B: RNCC: 5 | RNVC: 2
MS27114-22B: RNCC: 5 | RNVC: 9
M27536/1-22B: RNCC: 5 | RNVC: 9
MIL-DTL-27536/1: RNCC: 5 | RNVC: 9

12 Mar 1971

5340-00-229-4326
Butt Hinge

002294326
MS27958-38: RNCC: 2 | RNVC: 2
MS27958: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-229-4250
Butt Hinge

002294250
MS27956-58: RNCC: 2 | RNVC: 2
MS27956: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-412-9839
Angle Bracket

004129839
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-008: RNCC: 3 | RNVC: 2
MS9592-008: RNCC: 5 | RNVC: 9
5340PL1674379: RNCC: 6 | RNVC: 9

6 May 1970

5340-00-281-1536
Retaining Strap

002811536
NASM21314: RNCC: 3 | RNVC: 1
MS21314-2: RNCC: 3 | RNVC: 2
MS21314-2: RNCC: 5 | RNVC: 9
FFS760TYPE2STYLEA: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-286-3506
Dust And Moisture Seal Protective Cap-Plug

002863506
NAS834: RNCC: 3 | RNVC: 1
NAS834-117: RNCC: 3 | RNVC: 2
14X: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F24: RNCC: 5 | RNVC: 9
NAS847: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-413-6829
Loop Clamp

004136829
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D48KWX: RNCC: 3 | RNVC: 2
LS7357DT48: RNCC: 5 | RNVC: 1
MS21122-48: RNCC: 5 | RNVC: 9

1 May 1974

5340-00-291-5323
Loop Clamp

002915323
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG04: RNCC: 3 | RNVC: 2
AS21919WDG04: RNCC: 3 | RNVC: 9
2822642: RNCC: 5 | RNVC: 2
24527-3004: RNCC: 5 | RNVC: 2
904183: RNCC: 5 | RNVC: 2
2822642: RNCC: 5 | RNVC: 2
123609189: RNCC: 5 | RNVC: 2
3696440010: RNCC: 5 | RNVC: 2
91303897: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-290-4545
Plug Button

002904545
8495468: RNCC: 3 | RNVC: 2
730335: RNCC: 5 | RNVC: 2
9J5709: RNCC: 5 | RNVC: 2
100-046S48A1: RNCC: 5 | RNVC: 2
730335: RNCC: 5 | RNVC: 9
SS51026: RNCC: 5 | RNVC: 9
SS51026K2220: RNCC: 5 | RNVC: 9
SS51026K2215: RNCC: 5 | RNVC: 9
16229-1: RNCC: 5 | RNVC: 9
SS51026: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-291-5353
Loop Clamp

002915353
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG02: RNCC: 3 | RNVC: 2
AS21919WDG02: RNCC: 3 | RNVC: 9
JM44LC33WD2: RNCC: 5 | RNVC: 1
AS21919WDG2: RNCC: 5 | RNVC: 1
AS21919WDG02: RNCC: 5 | RNVC: 2
4116200-061: RNCC: 5 | RNVC: 2
2822624: RNCC: 5 | RNVC: 2
2822624: RNCC: 5 | RNVC: 2
AS21919WDG02: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-410-2980
Angle Bracket

004102980
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-048: RNCC: 3 | RNVC: 2
MS9592-048: RNCC: 5 | RNVC: 9
10117354: RNCC: 6 | RNVC: 9
5342PL0209943: RNCC: 6 | RNVC: 9

15 Aug 1969

5340-00-264-0919
Coat And Hat Hook

002640919
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 L03113: RNCC: 3 | RNVC: 2
ANSI A156.16 L03113: RNCC: 5 | RNVC: 9
FFH00111TYPEF1172: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-223-4175
Butt Hinge

002234175
MS27960-8: RNCC: 2 | RNVC: 2
02160: RNCC: 5 | RNVC: 1
02162: RNCC: 5 | RNVC: 1
BHMA A156.1: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-246-6391
Electrical-Mechanical Equipment Post

002466391
8224SS0632-0: RNCC: 3 | RNVC: 2
8224SS0632-7: RNCC: 3 | RNVC: 2
2494695-4: RNCC: 5 | RNVC: 2
688014-024: RNCC: 5 | RNVC: 2
10549060-2: RNCC: 5 | RNVC: 2
10067698-4: RNCC: 5 | RNVC: 2
007260-6-20: RNCC: 5 | RNVC: 2
CP15-2-22C06-20: RNCC: 5 | RNVC: 2
59174-2: RNCC: 5 | RNVC: 9
8224SS0632-7: RNCC: 5 | RNVC: 9

19 Feb 1969

5340-00-410-6443
Angle Bracket

004106443
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-210: RNCC: 3 | RNVC: 2
MS9592-210: RNCC: 5 | RNVC: 9

20 Aug 1969

5340-00-264-7626
Expansion Shield

002647626
AA55615-106: RNCC: 2 | RNVC: 2
A-A-55615: RNCC: 4 | RNVC: 1
FFS325: RNCC: 5 | RNVC: 9
PT6424DIAM0NDNY: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-139-6884
Loop Clamp

001396884
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C13K: RNCC: 3 | RNVC: 2

12 Sep 1971

5340-00-193-0128
Loop Clamp

001930128
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D18: RNCC: 3 | RNVC: 2
AN735D18: RNCC: 3 | RNVC: 9
AS7351D18: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-160-9507
Doorstop

001609507
062A3: RNCC: 3 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1

25 Aug 1972

5340-00-171-5521
Loop Clamp

001715521
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-9K: RNCC: 3 | RNVC: 2

16 Feb 1973

5340-00-151-5901
Angle Bracket

001515901
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-010: RNCC: 3 | RNVC: 2
MS9592-010: RNCC: 5 | RNVC: 9
10117265: RNCC: 6 | RNVC: 9
5340PL1559895: RNCC: 6 | RNVC: 9

30 Dec 1970

5340-00-190-6807
Retaining Strap

001906807
NASM21314: RNCC: 3 | RNVC: 1
MS21314-13: RNCC: 3 | RNVC: 2
FFS760TYPE2STYLEA: RNCC: 5 | RNVC: 9
T26: RNCC: 5 | RNVC: 9
MS21314-13: RNCC: 5 | RNVC: 9
PTT26: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-200-8636
Dust And Moisture Seal Protective Plug

002008636
890335-2: RNCC: 3 | RNVC: 2
74537-2: RNCC: 5 | RNVC: 9
74537-2: RNCC: 5 | RNVC: 9
43774: RNCC: 5 | RNVC: 9
43774: RNCC: 5 | RNVC: 9
RA3540-1: RNCC: 5 | RNVC: 9
43774: RNCC: 5 | RNVC: 9
U400511: RNCC: 5 | RNVC: 9
UA400511: RNCC: 5 | RNVC: 9
1604-41Y: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-187-8181
Turnbuckle

001878181
FFT791-TY1-FM1-CL4-5/8X18: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-187-8193
Turnbuckle

001878193
FFT791-TY1-FM1-CL4-1X18: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1
ASTM-F1145-I1D 1X18: RNCC: 5 | RNVC: 1
ASTM-F1145: RNCC: 5 | RNVC: 1
FFT791ATYPE1F0RM1CLASS4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0084
Loop Clamp

001930084
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D40: RNCC: 3 | RNVC: 2
AN735D40: RNCC: 3 | RNVC: 9
AN735D40: RNCC: 5 | RNVC: 9
10163899: RNCC: 6 | RNVC: 9
5340PL1822917: RNCC: 6 | RNVC: 9
AN735D40: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-193-0124
Loop Clamp

001930124
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D9: RNCC: 3 | RNVC: 2
AN735D9: RNCC: 5 | RNVC: 2
AS7351: RNCC: 5 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 9
AN735D9: RNCC: 5 | RNVC: 9
10117283: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-193-0149
Loop Clamp

001930149
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-34: RNCC: 3 | RNVC: 2
AN735-34: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0156
Loop Clamp

001930156
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-56: RNCC: 3 | RNVC: 2
AN735-56: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-200-8560
Loop Clamp

002008560
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG05: RNCC: 3 | RNVC: 2
AS21919WDG05: RNCC: 3 | RNVC: 9
JM44LC33WD5: RNCC: 5 | RNVC: 2
AS21919WDGO5: RNCC: 5 | RNVC: 2
TA1718WD5X: RNCC: 5 | RNVC: 2
MS21919WDG5: RNCC: 5 | RNVC: 2
2822652: RNCC: 5 | RNVC: 2
2600-L-W: RNCC: 5 | RNVC: 2
MS21919DG5: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-205-0094
Strap End Clip

002050094
MS51926-4: RNCC: 2 | RNVC: 2
MIL-C-496: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-257-7682
Dust And Moisture Seal Protective Cap-Plug

002577682
CB69-4: RNCC: 3 | RNVC: 2
833932: RNCC: 5 | RNVC: 2
025-0463-000: RNCC: 5 | RNVC: 2
5L.4591.002.64: RNCC: 5 | RNVC: 2
504356594: RNCC: 5 | RNVC: 2
0015332131: RNCC: 5 | RNVC: 2
0015332131KZ: RNCC: 5 | RNVC: 2
025-0463-000: RNCC: 5 | RNVC: 2
T14S: RNCC: 5 | RNVC: 9
5L4591-002-64: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-193-0117
Loop Clamp

001930117
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D2: RNCC: 3 | RNVC: 2
AN735D2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-177-4116
Loop Clamp

001774116
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C8T: RNCC: 3 | RNVC: 2
8016-S-8: RNCC: C | RNVC: 1
NAS1715C8K: RNCC: C | RNVC: 1

26 Nov 1969

5340-00-200-2741
Loop Clamp

002002741
AN742-6: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AN742-6: RNCC: 5 | RNVC: 1
01208532: RNCC: 5 | RNVC: 2
5340002002741: RNCC: 5 | RNVC: 9
HBCC161-6: RNCC: 5 | RNVC: 9
5340002002741: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-152-0457
Loop Clamp

001520457
10575014: RNCC: 1 | RNVC: 2
935749: RNCC: 3 | RNVC: 2
157E11-2296: RNCC: 3 | RNVC: 2
35751: RNCC: 3 | RNVC: 2
A19955: RNCC: 3 | RNVC: 2
83AX316: RNCC: 5 | RNVC: 2
34641: RNCC: 5 | RNVC: 2
7326971: RNCC: 5 | RNVC: 2
231-0320: RNCC: 5 | RNVC: 9
4115-0062-05: RNCC: 5 | RNVC: 9

5 Feb 1971

5340-00-119-7469
Angle Bracket

001197469
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-100: RNCC: 3 | RNVC: 2
MS9592-100: RNCC: 5 | RNVC: 9

4 Jan 1973

5340-00-103-2879
Loop Clamp

001032879
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-8N: RNCC: 3 | RNVC: 2
10117249: RNCC: 6 | RNVC: 9

12 Jun 1968

5340-00-082-1744
Spring Tension Clip

000821744
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-026-04C: RNCC: 3 | RNVC: 2
6008-67C: RNCC: 5 | RNVC: 9

20 Dec 1967

5340-00-191-8152
Loop Clamp

001918152
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C5T: RNCC: 3 | RNVC: 2

11 Mar 1970

5340-00-177-4013
Expansion Plug

001774013
SAE-AS9380: RNCC: 3 | RNVC: 1
MS9380-14: RNCC: 3 | RNVC: 2
AS9380: RNCC: 5 | RNVC: 9
MS9380-14: RNCC: 5 | RNVC: 9
5340001774013: RNCC: 5 | RNVC: 9
AS9380: RNCC: 5 | RNVC: 9
MS9380-14: RNCC: 5 | RNVC: 9
5340001774013: RNCC: 6 | RNVC: 9

29 Oct 1969

5340-00-097-4478
Butt Hinge Leaf

000974478
MS20001PX10-900: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PX10-900: RNCC: 5 | RNVC: 1
5340PL0845393: RNCC: 6 | RNVC: 9

15 Dec 1972

5340-00-141-6982
Loop Clamp

001416982
AN742D10: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
872194-01: RNCC: 5 | RNVC: 1
TA716D10HT: RNCC: 5 | RNVC: 9
5340PL1524842: RNCC: 6 | RNVC: 9
10117264: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-119-4709
Loop Clamp

001194709
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D17NH: RNCC: 3 | RNVC: 2
MS9352-16: RNCC: 5 | RNVC: 9

23 Oct 1968

5340-01-355-0960
Electrical-Mechanical Equipment Post

013550960
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C04B08: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-00-005-0541
Loop Clamp

000050541
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D32NH: RNCC: 3 | RNVC: 2
MS9352-31: RNCC: 5 | RNVC: 9

19 Jun 1972

5340-00-068-0528
Rod End Clevis

000680528
MS21252C3LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-3LS: RNCC: 5 | RNVC: 9
MS21252-3LS: RNCC: 5 | RNVC: 9
MS21252-3LS: RNCC: 5 | RNVC: 9
MS21252-3LS: RNCC: 5 | RNVC: 9
5340PL1734548: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-051-2671
Loop Clamp

000512671
MS9025-15: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
5340000512671: RNCC: 6 | RNVC: 9

1 Jan 1961

5340-00-068-0533
Rod End Clevis

000680533
MS21252-5LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-5LL: RNCC: 5 | RNVC: 1
MS21252-5LL: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-010-5138
Loop Clamp

000105138
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P4B: RNCC: 3 | RNVC: 2
NAS1397P4B: RNCC: 5 | RNVC: 2
NAS1397-P4B: RNCC: C | RNVC: 1
1 4-4-140: RNCC: C | RNVC: 1
CLN1-4BLK: RNCC: E | RNVC: 8

1 Jan 1961

5340-00-066-8098
Loop Clamp

000668098
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P14N: RNCC: 3 | RNVC: 2
NAS1397-14PN: RNCC: 5 | RNVC: 9
900128-04: RNCC: C | RNVC: 1
NAS1397-14: RNCC: C | RNVC: 1
7-8H: RNCC: C | RNVC: 1

5 Jul 1967

5340-00-060-5957
Bow Handle

000605957
NASM39087: RNCC: 3 | RNVC: 1
MS39087-5: RNCC: 3 | RNVC: 2
MS39087-5: RNCC: 5 | RNVC: 9
2050: RNCC: 5 | RNVC: 9
5340000605957: RNCC: 5 | RNVC: 9
5340000605957: RNCC: 6 | RNVC: 9
1264-01-02: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-031-0521
Loop Clamp

000310521
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K10N: RNCC: 3 | RNVC: 2

28 Oct 1972

5340-00-051-9133
Butt Hinge

000519133
MS20257P4-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
MS20257P4-7200: RNCC: 5 | RNVC: 1
2180895: RNCC: 5 | RNVC: 2
2180895: RNCC: 5 | RNVC: 2
MS20257-4-1100: RNCC: 5 | RNVC: 9
MS20257-4-1120: RNCC: 5 | RNVC: 9
MS20257-4-1325: RNCC: 5 | RNVC: 9
MS20257-4-694: RNCC: 5 | RNVC: 9
MS20257-4-8: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-060-3026
Angle Bracket

000603026
SAE-AS9228: RNCC: 3 | RNVC: 1
MS9228-22: RNCC: 3 | RNVC: 2
MS9228-22: RNCC: 3 | RNVC: 9
AS9228: RNCC: 5 | RNVC: 1
MS9228-22: RNCC: 5 | RNVC: 9
AS9228: RNCC: 5 | RNVC: 9
AS9228-22: RNCC: 5 | RNVC: 9

13 Jun 1967

5340-00-009-9158
Webbing Strap

000099158
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10J40: RNCC: 3 | RNVC: 2

11 Aug 1972

5340-00-069-0604
Rod End Connector

000690604
MS21254-5RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21254-5RL: RNCC: 5 | RNVC: 1
2821975: RNCC: 5 | RNVC: 2
NAS648-22RL: RNCC: 5 | RNVC: 9
2821975: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-4928
Rod End Connector

000694928
MS21255-5LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-01-190-0735
Electrical-Mechanical Equipment Post

011900735
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5D14: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-01-181-0753
Loop Clamp

011810753
7G3834: RNCC: 3 | RNVC: 2
7G-3834: RNCC: 5 | RNVC: 2

6 Jun 1984

5340-00-685-0093
Loop Clamp

006850093
1EMY7: RNCC: 3 | RNVC: 2
F6TL 312WT: RNCC: 3 | RNVC: 9

14 Sep 1994

5340-01-698-0573
Loop Clamp

016980573
30-302-2D05G07: RNCC: 3 | RNVC: 2
30-302-2D05G07: RNCC: 5 | RNVC: 2
30-302-2D05G07: RNCC: 5 | RNVC: 2
30-302-2D05G07: RNCC: 5 | RNVC: 2
30-302-2D05G07: RNCC: 5 | RNVC: 2

26 Oct 2021

5340-01-610-5152
Webbing Strap

016105152
44647-25: RNCC: 3 | RNVC: 2
13015062: RNCC: 5 | RNVC: 9
12339817-11: RNCC: 7 | RNVC: 2

20 Aug 2012

5340-00-078-0123
Spring Tension Clip

000780123
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B032-08C: RNCC: 3 | RNVC: 2
10117243: RNCC: 6 | RNVC: 9

9 Aug 1967

5340-00-069-0605
Aviation Rod End Connector

000690605
MS21254-6LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-01-708-3654
Access Door Hinge

017083654
5HA41205-115A: RNCC: 3 | RNVC: 2

1 Apr 2023

5340-01-709-2227
Spacing Threaded Standoff

017092227
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

18 May 2023

5340-01-710-5018
Mounting Plate

017105018
100019743: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-710-6721
Dust And Moisture Seal Protective Cap

017106721
5910828-27: RNCC: 3 | RNVC: 2

14 Jun 2023

5340-01-708-7237
Mounting Bracket

017087237
24.157.200: RNCC: 3 | RNVC: 2
DB1003804: RNCC: 5 | RNVC: 2

19 Apr 2023

5340-01-708-2725
Clip Retainer Plate

017082725
BL-17075-1: RNCC: 3 | RNVC: 2
BL17075-1: RNCC: 3 | RNVC: 2
BL17075-1: RNCC: 5 | RNVC: 2

27 Mar 2023

5340-01-710-5330
Mounting Plate

017105330
600A54: RNCC: 3 | RNVC: 2
600A54: RNCC: 5 | RNVC: 2

6 Jun 2023

5340-01-708-8529
Office Machine Lock

017088529
T0Y15UT: RNCC: 3 | RNVC: 2

27 Apr 2023

5340-01-710-6419
Mounting Plate

017106419
100020393: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-709-1763
Spacing Threaded Standoff

017091763
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

16 May 2023

5340-01-710-5537
Mounting Bracket

017105537
724E3315-121: RNCC: 3 | RNVC: 2

7 Jun 2023

5340-01-708-2610
Weapon Unit Stand

017082610
4097AS450-1: RNCC: 3 | RNVC: 2

25 Mar 2023

5340-01-709-1552
Mounting Plate

017091552
70040704-1: RNCC: 3 | RNVC: 2

15 May 2023

5340-01-709-1056
Mounting Bracket

017091056
ALBCBS 303 59-5: RNCC: 3 | RNVC: 2

11 May 2023

5340-01-708-4883
Mounting Bracket

017084883
RAP-B-201U: RNCC: 3 | RNVC: 2

10 Apr 2023

5340-01-710-4766
Mounting Bracket

017104766
IC9358-06: RNCC: 3 | RNVC: 2

1 Jun 2023

5340-01-708-8189
Rod End Clevis

017088189
2406416: RNCC: 3 | RNVC: 2
2406416: RNCC: 5 | RNVC: 2

25 Apr 2023

5340-01-710-2705
Mounting Bracket

017102705
00-437447: RNCC: 3 | RNVC: 2

20 May 2023

5340-01-709-0318
Extension Drawer Slide

017090318
CSK43-150A-2RS-Y: RNCC: 3 | RNVC: 2
CSK43-150A-2RS-Y: RNCC: 5 | RNVC: 2

6 May 2023

5340-01-710-6134
Mounting Plate

017106134
100020292: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-710-3253
Retaining Strap

017103253
BFPC-J1025-024-P000: RNCC: 3 | RNVC: 2
BFPC-J1025-024-P000: RNCC: 5 | RNVC: 2

24 May 2023

5340-01-710-2689
Mounting Bracket

017102689
395495: RNCC: 3 | RNVC: 2
7423227791: RNCC: 5 | RNVC: 2
23227791: RNCC: 5 | RNVC: 2

20 May 2023

5340-01-708-4483
Utility Access Door

017084483
SLS-030-310-103: RNCC: 3 | RNVC: 2

6 Apr 2023

5340-01-708-9500
Bumper

017089500
277D2750-505: RNCC: 3 | RNVC: 2

2 May 2023

5340-01-710-6483
Clamping Catch

017106483
12282-2925-01: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-709-2280
Mounting Plate

017092280
B003310M05069-0059: RNCC: 3 | RNVC: 2
B003310M05069-0059: RNCC: 5 | RNVC: 2
B003310M05069: RNCC: D | RNVC: 9

18 May 2023

5340-01-709-2319
Access Cover

017092319
12644543-001: RNCC: 3 | RNVC: 2
12644543-001: RNCC: C | RNVC: 1
12644543: RNCC: D | RNVC: 9

18 May 2023

5340-01-709-2548
Mounting Bracket

017092548
12644536-001: RNCC: 3 | RNVC: 2
12644536-001: RNCC: C | RNVC: 1
12644536: RNCC: D | RNVC: 9

19 May 2023

5340-01-710-3406
Mounting Bracket

017103406
12644538-002: RNCC: 3 | RNVC: 2
12644538-002: RNCC: C | RNVC: 1
12644538: RNCC: D | RNVC: 9

25 May 2023

5340-01-710-4472
Mounting Plate

017104472
9333-00-0950: RNCC: 3 | RNVC: 2
9333-00-0000 ITEM 95: RNCC: C | RNVC: 1
9334-00-0000: RNCC: D | RNVC: 9

30 May 2023

5340-01-710-4868
Butt Hinge

017104868
5203000SS: RNCC: 3 | RNVC: 2
8216623-274: RNCC: C | RNVC: 1
8216623: RNCC: D | RNVC: 9

1 Jun 2023

5340-01-710-5541
Loop Clamp

017105541
79-15076: RNCC: 3 | RNVC: 2
20385-ITEM-9: RNCC: 5 | RNVC: 2
20385 REV H SHEET 1 FIND 9: RNCC: C | RNVC: 1

7 Jun 2023

5340-01-710-6302
Mounting Bracket

017106302
12416451: RNCC: 3 | RNVC: 2
12416451: RNCC: C | RNVC: 1

12 Jun 2023

5340-01-710-6584
Cushioning Pad

017106584
12242-2023-02: RNCC: 3 | RNVC: 2
12242-2023: RNCC: D | RNVC: 9

13 Jun 2023

NSN 5340-00-971-7777 009717777 HINGE,BUTT

5340-00-971-7777
Butt Hinge

009717777
BHMA-A156.1: RNCC: 3 | RNVC: 1
F191US3 4 1/2X4 1/2: RNCC: 3 | RNVC: 2
F-191-4 1/2X4 1/2-US10: RNCC: 5 | RNVC: 9
191: RNCC: 5 | RNVC: 9
ANAI A 156.1-1981 TYPE A2133: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-701-5427
Mounting Bracket

017015427
22428-01: RNCC: 3 | RNVC: 2
22428-01: RNCC: 5 | RNVC: 2

23 May 2022

5340-01-699-7800
Bumper

016997800
8709075: RNCC: 3 | RNVC: 2
9223K72: RNCC: 5 | RNVC: 2

24 Feb 2022

5340-01-701-0002
Rigid Connecting Link

017010002
416T2232-6: RNCC: 3 | RNVC: 1

21 Apr 2022

5340-01-699-7911
Double Angle Bracket

016997911
8701244: RNCC: 3 | RNVC: 2

25 Feb 2022

5340-01-699-8344
Mounting Bracket

016998344
401/P4532: RNCC: 3 | RNVC: 2

1 Mar 2022

5340-01-699-8383
Utility Resilient Mount

016998383
53711-310-8788850-2: RNCC: 3 | RNVC: 2
3108864069ITEM2: RNCC: 5 | RNVC: 2

1 Mar 2022

5340-01-701-0086
Access Cover

017010086
77C734952P10: RNCC: 3 | RNVC: 2
77C734952/PART 10: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-701-6210
Mounting Plate

017016210
12680072: RNCC: 3 | RNVC: 2

26 May 2022

5340-01-701-0274
Spacing Threaded Standoff

017010274
ENDM120757-FIND 14: RNCC: 3 | RNVC: 2
6408950-14: RNCC: C | RNVC: 1
6408950: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-699-9728
Access Cover

016999728
D 0 01 0050: RNCC: 3 | RNVC: 2
27526912: RNCC: 5 | RNVC: 9

9 Mar 2022

5340-01-701-5303
Mounting Bracket

017015303
KLAS-METL-1852: RNCC: 3 | RNVC: 2
12665711: RNCC: 7 | RNVC: 2

20 May 2022

5340-01-441-0410
Retaining Strap

014410410
SAE-AS9394: RNCC: 3 | RNVC: 1
MS9394-06: RNCC: 3 | RNVC: 2
MS9394-06: RNCC: 5 | RNVC: 9

31 Jan 1997

5340-01-702-0181
Mounting Bracket

017020181
12596472: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0261
Mounting Bracket

017020261
12639108: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-3932
Crank Handle

017013932
8287947: RNCC: 3 | RNVC: 2
8287948 PC 2: RNCC: D | RNVC: 9

16 May 2022

5340-01-700-2906
Sliding Block

017002906
42714007: RNCC: 3 | RNVC: 2

22 Mar 2022

5340-01-702-0446
Access Cover

017020446
12618130: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0535
Mounting Bracket

017020535
12596588: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-8471
Expansion Shield

017008471
HST3-R M16X220 120/100: RNCC: 3 | RNVC: 2
IN900602135: RNCC: 3 | RNVC: 2

16 Apr 2022

5340-01-702-0611
Mounting Plate

017020611
12594578: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0617
Mounting Plate

017020617
12594584: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0739
Mounting Bracket

017020739
133176-1: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0747
Mounting Plate

017020747
988-0805-002: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0773
Manual Control Lever

017020773
988-0820-001: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0782
Mounting Plate

017020782
988-0788-002: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-3374
Section Block Clamp

017003374
272W9100-170: RNCC: 3 | RNVC: 1

23 Mar 2022

5340-01-699-7308
Access Cover

016997308
400/Y6614: RNCC: 3 | RNVC: 2

22 Feb 2022

5340-01-699-7416
Dust And Moisture Seal Protective Plug

016997416
H016248: RNCC: 3 | RNVC: 2
5-13-10950-1: RNCC: 5 | RNVC: 2
5-13-10950: RNCC: 7 | RNVC: 2

23 Feb 2022

5340-01-700-9080
Door Handle

017009080
201-038-0106: RNCC: 3 | RNVC: 2

19 Apr 2022

5340-01-700-3706
Shaft Collar

017003706
581-6726674 FIND 13 14: RNCC: 3 | RNVC: 2
581-6726674 FIND 13 14: RNCC: 5 | RNVC: 2

25 Mar 2022

5340-01-700-3786
Mounting Bracket

017003786
9000-29002-01: RNCC: 3 | RNVC: 2

25 Mar 2022

5340-01-700-3947
Access Cover

017003947
12680083: RNCC: 3 | RNVC: 2

25 Mar 2022

5340-01-700-9259
Slotted Nut Locking Device

017009259
595-8544603-PN-19: RNCC: 3 | RNVC: 2
H684-8001-PN-19: RNCC: 5 | RNVC: 2

20 Apr 2022

5340-01-700-3913
Mounting Plate

017003913
12680076: RNCC: 3 | RNVC: 2

25 Mar 2022

5340-01-699-7501
Mounting Bracket

016997501
4370288: RNCC: 3 | RNVC: 2

23 Feb 2022

5340-01-701-4951
Mounting Bracket

017014951
8604261-1: RNCC: 3 | RNVC: 2
8604261: RNCC: D | RNVC: 9

19 May 2022

5340-01-700-8731
Mounting Bracket

017008731
123CS11231-24: RNCC: 3 | RNVC: 2
123CS11231: RNCC: D | RNVC: 9

18 Apr 2022

5340-01-702-0204
Access Cover

017020204
12617688: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0383
Mounting Bracket

017020383
12596109: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-8387
Access Cover

017008387
5802076655: RNCC: 3 | RNVC: 2

15 Apr 2022

5340-01-698-8009
Corrosion Preventive Anode

016988009
ZN5007K: RNCC: 3 | RNVC: 2
3215C: RNCC: D | RNVC: 9

9 Dec 2021

5340-01-701-9706
Block Clamp

017019706
NGC500EG-5A1: RNCC: 3 | RNVC: 2
NGC500EG-5A1: RNCC: 5 | RNVC: 2
NGC500EG-5A1: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

21 Jun 2022

5340-01-701-9823
Mounting Plate

017019823
12596586: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-699-6727
Mounting Bracket

016996727
334/G0876: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-704-9698
Retaining Strap

017049698
5-13-13458-1: RNCC: 3 | RNVC: 2
5-13-13458-1: RNCC: 5 | RNVC: 2
5-13-13458: RNCC: D | RNVC: 9

12 Sep 2022

5340-01-699-6608
Double Angle Bracket

016996608
400/B8927: RNCC: 3 | RNVC: 2

16 Feb 2022

5340-01-701-3727
Retaining Strap

017013727
866-580: RNCC: 3 | RNVC: 2

12 May 2022

5340-01-702-0077
Mounting Plate

017020077
12593906: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9997
Mounting Bracket

017019997
12639382: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-699-6739
Mounting Plate

016996739
D 0 01 0002: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-701-9932
Loop Clamp

017019932
12594631: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-3391
Access Cover

017013391
1013F413000: RNCC: 3 | RNVC: 9
12401555000000: RNCC: 5 | RNVC: 2
5802954604: RNCC: 5 | RNVC: 9

11 May 2022

5340-01-701-9934
Mounting Bracket

017019934
12596657: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9936
Mounting Plate

017019936
12617257: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-3483
Bow Handle

017013483
636E004-245: RNCC: 3 | RNVC: 2

11 May 2022

5340-01-701-9964
Mounting Bracket

017019964
12618042: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9813
Metal Grille

017019813
12617387: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-699-5441
Retaining Clip

016995441
L3045856-046: RNCC: 3 | RNVC: 2

8 Feb 2022

5340-01-700-6435
Angle Bracket

017006435
12510017: RNCC: 3 | RNVC: 2

5 Apr 2022

5340-01-700-6541
Aircraft Latch Hook

017006541
901-060-818-108: RNCC: 3 | RNVC: 2
PL901-060-818-108: RNCC: D | RNVC: 9
NL901-060-818-108: RNCC: D | RNVC: 9

5 Apr 2022

5340-01-700-1272
Cushioning Pad

017001272
618E004-196: RNCC: 3 | RNVC: 2

17 Mar 2022

5340-01-700-6678
Mounting Bracket

017006678
2007658-11: RNCC: 3 | RNVC: 2

6 Apr 2022

5340-01-701-2426
Angle Bracket

017012426
12665705-02: RNCC: 3 | RNVC: 2
12665705: RNCC: D | RNVC: 9

5 May 2022

5340-01-701-3014
Mounting Bracket

017013014
636E004-215: RNCC: 3 | RNVC: 2
636E004: RNCC: D | RNVC: 9

9 May 2022

5340-01-701-9736
Access Cover

017019736
12617662: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-703-1091
Mounting Plate

017031091
12685043: RNCC: 3 | RNVC: 2
12685043: RNCC: 5 | RNVC: 9

17 Aug 2022

5340-01-703-1387
Angle Bracket

017031387
12613400: RNCC: 3 | RNVC: 2
12613400: RNCC: 5 | RNVC: 2

18 Aug 2022

5340-01-703-2624
Mounting Bracket

017032624
CA103: RNCC: 3 | RNVC: 9
3018-501: RNCC: 5 | RNVC: 2

25 Aug 2022

5340-01-703-2753
Spacing Threaded Standoff

017032753
13674172-002: RNCC: 3 | RNVC: 2
13674172: RNCC: D | RNVC: 9

26 Aug 2022

5340-01-703-2920
Lock-Release Lever

017032920
45596-41: RNCC: 3 | RNVC: 2
879301: RNCC: 5 | RNVC: 2

27 Aug 2022

5340-01-699-6384
Filler Opening Cap

016996384
78700-30000-046: RNCC: 3 | RNVC: 2

15 Feb 2022

5340-01-703-3016
Mounting Bracket

017033016
8668792-001: RNCC: 3 | RNVC: 2
8668792/ FIND NO.1: RNCC: C | RNVC: 1
8668792: RNCC: D | RNVC: 9

29 Aug 2022

5340-01-699-6407
Dust And Moisture Seal Protective Cap

016996407
21145970: RNCC: 3 | RNVC: 2

15 Feb 2022

5340-01-703-4026
Lock-Release Lever

017034026
5-13-10201-3: RNCC: 3 | RNVC: 2
5-13-10201-3: RNCC: 5 | RNVC: 2
5-13-10201: RNCC: D | RNVC: 9

6 Sep 2022

5340-01-703-4364
Mounting Plate

017034364
5-13-11012-1: RNCC: 3 | RNVC: 2

7 Sep 2022

5340-01-704-3942
Utility Access Door

017043942
5-13-10519-1: RNCC: 3 | RNVC: 2
5-13-10519-1: RNCC: 5 | RNVC: 2
5-13-10519: RNCC: D | RNVC: 9

9 Sep 2022

5340-01-704-7881
Crank Handle

017047881
H4X-06B: RNCC: 3 | RNVC: 2

12 Sep 2022

5340-01-699-5117
Loop Clamp

016995117
COL2411Z1: RNCC: 1 | RNVC: 2
COL2411Z1: RNCC: 3 | RNVC: 9

4 Feb 2022

5340-01-700-7943
Mounting Bracket

017007943
06100-08251-042: RNCC: 3 | RNVC: 2
06100-08251: RNCC: D | RNVC: 9

14 Apr 2022

5340-01-701-9292
Mounting Bracket

017019292
182085: RNCC: 3 | RNVC: 2

16 Jun 2022

5340-01-699-6128
Mounting Plate

016996128
1109200110: RNCC: 3 | RNVC: 2

11 Feb 2022

5340-01-699-6138
Mounting Bracket

016996138
EM1450: RNCC: 3 | RNVC: 2

11 Feb 2022

5340-01-699-6155
Access Cover

016996155
5HK01711-111: RNCC: 3 | RNVC: 2

13 Feb 2022

5340-01-699-6231
Dust And Moisture Seal Protective Plug

016996231
5-13-10538-1: RNCC: 3 | RNVC: 2
5-13-10538: RNCC: 7 | RNVC: 2

14 Feb 2022

5340-01-701-9128
Access Cover

017019128
618842-2L: RNCC: 3 | RNVC: 2
517142: RNCC: D | RNVC: 9

15 Jun 2022

5340-01-700-1963
Cushioning Pad

017001963
VRCVP01PU: RNCC: 3 | RNVC: 2

21 Mar 2022

5340-01-701-2631
Mounting Bracket

017012631
2674827: RNCC: 3 | RNVC: 2

6 May 2022

5340-01-700-6505
Mounting Bracket

017006505
1080771-101: RNCC: 3 | RNVC: 2

5 Apr 2022

5340-01-700-1181
Bolt And Spacer Kit

017001181
72-0171: RNCC: 3 | RNVC: 2
09010B1350-0: RNCC: 7 | RNVC: 2

17 Mar 2022

5340-01-700-0800
Multiple Angle Bracket

017000800
988-0807-001: RNCC: 3 | RNVC: 2
988-0807: RNCC: D | RNVC: 9

16 Mar 2022

5340-01-700-0863
Dust And Moisture Seal Protective Cover

017000863
10-761: RNCC: 3 | RNVC: 2

16 Mar 2022

5340-01-700-1002
Cushioning Pad

017001002
618E004-195: RNCC: 3 | RNVC: 2
618E004: RNCC: D | RNVC: 9

16 Mar 2022

5340-01-701-8191
Mounting Plate

017018191
180710: RNCC: 3 | RNVC: 2

9 Jun 2022

5340-01-701-1549
Mounting Bracket

017011549
12665686: RNCC: 3 | RNVC: 2
KLAS-METL-1833: RNCC: 3 | RNVC: 9

29 Apr 2022

5340-01-699-5637
Bumper

016995637
8287458: RNCC: 3 | RNVC: 2
8287449 / SHEET 1/ P08: RNCC: C | RNVC: 1

9 Feb 2022

5340-01-700-6839
Butt Hinge Leaf

017006839
74A151830-2002: RNCC: 3 | RNVC: 2

7 Apr 2022

5340-01-701-2641
Mounting Bracket

017012641
1061A-70-00: RNCC: 3 | RNVC: 2

6 May 2022

5340-01-700-1765
Friction Catch Stud

017001765
604ZN: RNCC: 3 | RNVC: 2

19 Mar 2022

5340-01-700-1770
Bridge Clamp

017001770
37845-1: RNCC: 3 | RNVC: 2
37845 / REV B /FIND NO.1: RNCC: D | RNVC: 9

19 Mar 2022

5340-01-703-0791
Mechanic Equipment Hardware Kit

017030791
9U-7350: RNCC: 3 | RNVC: 2

16 Aug 2022

5340-01-700-0722
Bumper

017000722
10088592: RNCC: 3 | RNVC: 2

15 Mar 2022

5340-01-701-7281
Mounting Bracket

017017281
182083: RNCC: 3 | RNVC: 2

3 Jun 2022

5340-01-699-4955
Mounting Bracket

016994955
8789452: RNCC: 3 | RNVC: 2

3 Feb 2022

5340-01-701-1044
Bumper

017011044
0953P015: RNCC: 3 | RNVC: 2
600167183: RNCC: 5 | RNVC: 9

27 Apr 2022

5340-01-701-7260
Mounting Bracket

017017260
182082: RNCC: 3 | RNVC: 2

3 Jun 2022

5340-01-701-0829
Electronic Equipment Hardware Kit

017010829
11080-3932-02: RNCC: 3 | RNVC: 2

26 Apr 2022

5340-01-700-0335
Mounting Bracket

017000335
65917-2: RNCC: 3 | RNVC: 2

12 Mar 2022

5340-01-699-4674
Dust And Moisture Seal Protective Cap Set

016994674
351A702-1: RNCC: 3 | RNVC: 2

2 Feb 2022

5340-01-700-0488
Dust And Moisture Seal Protective Cap

017000488
1489-AMCLPS: RNCC: 3 | RNVC: 2
17-60471: RNCC: 7 | RNVC: 2

14 Mar 2022

5340-01-700-0521
Access Cover

017000521
146A7011-8: RNCC: 3 | RNVC: 2
146A7011: RNCC: D | RNVC: 9

15 Mar 2022

5340-01-698-8647
Mounting Bracket

016988647
300880: RNCC: 3 | RNVC: 2

16 Dec 2021

5340-01-697-6983
Metal Grille

016976983
USC-AV-1300F-25.71X22.50: RNCC: 3 | RNVC: 2

5 Oct 2021

5340-01-698-9225
Retaining Clip

016989225
D1-51811D: RNCC: 3 | RNVC: 2

21 Dec 2021

5340-01-697-7118
Angle Bracket

016977118
20-032-3E: RNCC: 3 | RNVC: 2
20-032: RNCC: D | RNVC: 9

6 Oct 2021

5340-01-697-7177
Expansion Shield

016977177
CA126: RNCC: 3 | RNVC: 2
65216: RNCC: 5 | RNVC: 2

6 Oct 2021

5340-01-698-0256
Track Stop

016980256
78204-02557-108: RNCC: 3 | RNVC: 2

25 Oct 2021

5340-01-697-9192
Loop Clamp

016979192
30-302-2C18J09: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-697-9129
Access Cover

016979129
237-0360: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-697-9078
Dust And Moisture Seal Protective Plug

016979078
SAE-AS85720: RNCC: 3 | RNVC: 1
AS8440T06: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-698-8366
Mounting Bracket

016988366
524-8436: RNCC: 3 | RNVC: 2

14 Dec 2021

5340-01-697-9269
Mounting Bracket

016979269
5AM64218-317: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-697-7193
Access Cover

016977193
521-5735: RNCC: 3 | RNVC: 2

6 Oct 2021

5340-01-698-0314
Spacing Threaded Standoff

016980314
CB4201C3CR28H: RNCC: 3 | RNVC: 2

25 Oct 2021

5340-01-697-7442
Engine Plate

016977442
21892734: RNCC: 3 | RNVC: 2
21892736: RNCC: 5 | RNVC: 1

7 Oct 2021

5340-01-697-7494
Mounting Bracket

016977494
12610083: RNCC: 3 | RNVC: 2

7 Oct 2021

5340-01-697-7542
Access Cover

016977542
5218339: RNCC: 3 | RNVC: 2

7 Oct 2021

5340-01-698-0574
Manual Control Lever

016980574
500K4733: RNCC: 3 | RNVC: 2
500K4733: RNCC: 5 | RNVC: 9

26 Oct 2021

5340-01-697-7087
Webbing Strap

016977087
12340517-5: RNCC: 3 | RNVC: 2
12340517: RNCC: D | RNVC: 9

6 Oct 2021

5340-01-698-3702
Mounting Plate

016983702
DSS1047: RNCC: 3 | RNVC: 2

11 Nov 2021

5340-01-698-8741
T Bracket

016988741
067-027589-0001: RNCC: 3 | RNVC: 2

16 Dec 2021

5340-01-698-4172
Access Cover

016984172
50972: RNCC: 3 | RNVC: 2

16 Nov 2021

5340-01-698-3143
Angle Bracket

016983143
78207-01010-131: RNCC: 3 | RNVC: 2

9 Nov 2021

5340-01-699-0458
Mounting Plate

016990458
IBVF-750-S: RNCC: 3 | RNVC: 2

4 Jan 2022

5340-01-699-3197
Loop Clamp

016993197
63064H B: RNCC: 3 | RNVC: 2

24 Jan 2022

5340-01-699-3378
Mounting Bracket

016993378
9-2-4771: RNCC: 3 | RNVC: 2

25 Jan 2022

5340-01-699-3272
Special Adapter Plate

016993272
8789405: RNCC: 3 | RNVC: 2

24 Jan 2022

5340-01-699-3672
Heater Block

016993672
FSPP-115-00-005: RNCC: 3 | RNVC: 2
174-0011-VEC: RNCC: 5 | RNVC: 2

26 Jan 2022

5340-01-699-3382
Mounting Bracket

016993382
9-2-4865: RNCC: 3 | RNVC: 2

25 Jan 2022

5340-01-699-3119
Utility Access Door

016993119
8789404: RNCC: 3 | RNVC: 2

24 Jan 2022

5340-01-699-4171
Loop Clamp

016994171
6-44657: RNCC: 3 | RNVC: 2

28 Jan 2022

5340-01-699-4379
Turnbuckle

016994379
167-7066382-PART-142: RNCC: 3 | RNVC: 2
H434-0104-PART-142: RNCC: 5 | RNVC: 1

31 Jan 2022

5340-01-699-4551
Access Cover

016994551
12644181: RNCC: 3 | RNVC: 2

1 Feb 2022

5340-01-701-0202
Dust And Moisture Seal Protective Cap

017010202
5-15-34976: RNCC: 3 | RNVC: 1
5-15-34976: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-700-5612
Mounting Plate

017005612
06351-08012-101: RNCC: 3 | RNVC: 2

4 Apr 2022

5340-01-698-8732
Angle Bracket

016988732
300980: RNCC: 3 | RNVC: 2

16 Dec 2021

5340-01-698-6725
Utility Resilient Mount

016986725
51188: RNCC: 3 | RNVC: 2

2 Dec 2021

5340-01-698-7566
T Bracket

016987566
DSS1064: RNCC: 3 | RNVC: 2

6 Dec 2021

5340-01-698-2077
Mounting Plate

016982077
U000000053: RNCC: 3 | RNVC: 2
DAAK018635 REV - SEQ 076: RNCC: D | RNVC: 9

3 Nov 2021

5340-01-697-8304
Retaining Strap

016978304
339637: RNCC: 3 | RNVC: 2

13 Oct 2021

5340-01-698-8217
Mounting Bracket

016988217
4535534: RNCC: 3 | RNVC: 2

10 Dec 2021

5340-01-698-8538
Mounting Bracket

016988538
151-008069-0004: RNCC: 3 | RNVC: 2
151-008069: RNCC: D | RNVC: 9

15 Dec 2021

5340-01-699-2515
Retaining Strap

016992515
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24W40N: RNCC: 3 | RNVC: 2

20 Jan 2022

5340-01-697-8240
Mounting Bracket

016978240
13013625-1: RNCC: 3 | RNVC: 2
13013625: RNCC: D | RNVC: 9

13 Oct 2021

5340-01-698-8548
Cushioning Pad

016988548
301358: RNCC: 3 | RNVC: 2

15 Dec 2021

5340-01-699-3030
Mounting Bracket

016993030
373576-3: RNCC: 3 | RNVC: 2

22 Jan 2022

5340-01-698-8561
Mounting Bracket

016988561
12602598: RNCC: 3 | RNVC: 2

15 Dec 2021

5340-01-698-0470
Loop Clamp

016980470
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG08Y: RNCC: 3 | RNVC: 2

26 Oct 2021

5340-01-698-1434
Mounting Bracket

016981434
891-11096-2: RNCC: 3 | RNVC: 2

1 Nov 2021

5340-01-698-1592
Clamping Catch

016981592
4F70073-102C: RNCC: 3 | RNVC: 2
4F70073: RNCC: D | RNVC: 9

2 Nov 2021

5340-01-699-2159
Bumper

016992159
4366324: RNCC: 3 | RNVC: 2
4366324-EDFP: RNCC: D | RNVC: 9

18 Jan 2022

5340-01-698-6746
Angle Bracket

016986746
8604557-2: RNCC: 3 | RNVC: 2
8604557: RNCC: D | RNVC: 9

2 Dec 2021

5340-01-698-6786
Snap-In Plain Standoff

016986786
DSS1044: RNCC: 3 | RNVC: 2

2 Dec 2021

5340-01-697-9606
Rigid Connecting Link

016979606
23158822: RNCC: 3 | RNVC: 2

20 Oct 2021

5340-01-699-1430
Shelf Bracket

016991430
151-010804-0002: RNCC: 3 | RNVC: 2

11 Jan 2022

5340-01-698-5973
Mounting Bracket

016985973
4354377: RNCC: 3 | RNVC: 2

29 Nov 2021

5340-01-697-7722
Double Angle Bracket

016977722
5HM40050-345: RNCC: 3 | RNVC: 2

8 Oct 2021

5340-01-695-5315
Loop Clamp

016955315
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C21SH: RNCC: 3 | RNVC: 2

10 Jun 2021

5340-01-695-4956
Retaining Strap

016954956
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C19W36N: RNCC: 3 | RNVC: 2

9 Jun 2021

5340-01-197-6751
Retaining Strap

011976751
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D9-17N: RNCC: 3 | RNVC: 2

24 Dec 1984

5340-01-692-0222
Retaining Strap

016920222
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C22W56N: RNCC: 3 | RNVC: 2

13 Nov 2020

5340-01-690-5456
Loop Clamp

016905456
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-12S: RNCC: 3 | RNVC: 2

18 Aug 2020

5340-01-709-1564
Multiple Angle Bracket

017091564
12640585: RNCC: 3 | RNVC: 2
12640585: RNCC: 5 | RNVC: 2

15 May 2023

5340-01-709-2077
Extension Drawer Slide

017092077
25010220-KD: RNCC: 3 | RNVC: 2
8824290 FIND ITEM 3: RNCC: C | RNVC: 1
8824290: RNCC: D | RNVC: 9

17 May 2023

5340-01-710-1899
Mounting Bracket

017101899
12640336: RNCC: 3 | RNVC: 2
12640336: RNCC: 5 | RNVC: 1

19 May 2023

5340-01-709-2253
Multiple Angle Bracket

017092253
12640335: RNCC: 3 | RNVC: 2
12640335: RNCC: 5 | RNVC: 2

18 May 2023

5340-01-710-3145
Bow Handle

017103145
145K875H01: RNCC: 3 | RNVC: 2
145K875: RNCC: D | RNVC: 9

24 May 2023

5340-01-710-4468
Bumper

017104468
B003310M05069-0039: RNCC: 3 | RNVC: 2
B003310M05069-0039: RNCC: 5 | RNVC: 2
B003310M05069: RNCC: D | RNVC: 9

30 May 2023

5340-01-710-4894
Helical Compression Spring Seat

017104894
40437-1006-1: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-710-5173
Flush Catch

017105173
6154416-001: RNCC: 1 | RNVC: 2
49-0032-00: RNCC: 3 | RNVC: 2
6154416: RNCC: D | RNVC: 9

5 Jun 2023

5340-01-710-5293
Webbing Strap

017105293
EE2202NFX5.5: RNCC: 3 | RNVC: 2
1371335: RNCC: 7 | RNVC: 2

6 Jun 2023

5340-01-710-5615
Sealing Plug Assembly

017105615
PLGA2180030A: RNCC: 3 | RNVC: 2

7 Jun 2023

5340-01-710-5945
Angle Bracket

017105945
X0606-00398-046: RNCC: 3 | RNVC: 2
X0606-00398: RNCC: D | RNVC: 9

9 Jun 2023

5340-01-710-6053
Block Clamp

017106053
12645239: RNCC: 3 | RNVC: 2
12645239: RNCC: C | RNVC: 1

9 Jun 2023

5340-01-710-6450
Mounting Plate

017106450
12645398: RNCC: 3 | RNVC: 2
12645398: RNCC: C | RNVC: 1

13 Jun 2023

5340-01-709-2310
Spacing Threaded Standoff

017092310
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

18 May 2023

5340-01-710-5167
Mounting Bracket

017105167
X0606-00398-148: RNCC: 3 | RNVC: 2
X0606-00398: RNCC: D | RNVC: 9

5 Jun 2023

5340-01-710-6234
Dust And Moisture Seal Protective Cover

017106234
12674898: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-709-2223
Spacing Threaded Standoff

017092223
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

18 May 2023

5340-01-709-2224
Spacing Threaded Standoff

017092224
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

18 May 2023

5340-01-709-2267
Spacing Threaded Standoff

017092267
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

18 May 2023

5340-01-710-6369
Mounting Bracket

017106369
5HR40006-139: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-710-6595
Engine Accessory Bracket

017106595
4314438-02: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-710-5115
Blank Panel

017105115
13076707: RNCC: 3 | RNVC: 2

5 Jun 2023

5340-01-709-2480
Dust And Moisture Seal Protective Cover

017092480
00-972612: RNCC: 3 | RNVC: 2

19 May 2023

5340-01-709-1670
Tie Down Ring

017091670
2340080-302: RNCC: 3 | RNVC: 2

15 May 2023

5340-01-676-6570
Access Cover

016766570
160-000-209RS02: RNCC: 3 | RNVC: 2
636-160-000-209RS02: RNCC: 5 | RNVC: 2
JX2835A00: RNCC: 5 | RNVC: 2

6 Nov 2018

5340-01-708-4260
Access Hole Frame

017084260
OB9365-01: RNCC: 3 | RNVC: 2

5 Apr 2023

5340-01-708-9389
Utility Resilient Mount

017089389
M20-430-08-S-B: RNCC: 3 | RNVC: 2

2 May 2023

5340-01-708-5276
Utility Resilient Mount

017085276
SLS-010-251-101: RNCC: 3 | RNVC: 2

12 Apr 2023

5340-01-708-6218
Dust And Moisture Seal Protective Cap

017086218
5240403: RNCC: 3 | RNVC: 2

13 Apr 2023

5340-01-710-5335
Mounting Plate

017105335
600A55: RNCC: 3 | RNVC: 2
600A55: RNCC: 5 | RNVC: 2

6 Jun 2023

5340-01-708-6971
Mounting Bracket

017086971
866066 E21: RNCC: 3 | RNVC: 2
866066_E21: RNCC: 5 | RNVC: 2

18 Apr 2023

5340-01-710-5249
Mounting Plate

017105249
952229: RNCC: 3 | RNVC: 2

5 Jun 2023

5340-01-710-6482
Mounting Plate

017106482
100020340: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-710-6335
Mounting Plate

017106335
100020590: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-710-5882
Extension Drawer Slide

017105882
W874K: RNCC: 3 | RNVC: 2

8 Jun 2023

5340-01-708-7618
Rigid Connecting Link

017087618
74675-3: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-708-4399
Dust And Moisture Seal Protective Cap-Plug

017084399
373967-1329: RNCC: 3 | RNVC: 2

5 Apr 2023

5340-01-708-1861
Access Cover

017081861
2943105-101: RNCC: 3 | RNVC: 2

20 Mar 2023

5340-01-708-7993
Dust And Moisture Seal Boot

017087993
809S060-5: RNCC: 3 | RNVC: 2

24 Apr 2023

5340-01-709-0328
Extension Drawer Slide

017090328
TGC-28-1920-Y: RNCC: 3 | RNVC: 2
TGC-28-1920-Y: RNCC: 5 | RNVC: 2

6 May 2023

5340-01-708-3373
Mounting Plate

017083373
6455908: RNCC: 3 | RNVC: 2

30 Mar 2023

5340-01-708-3629
Loop Clamp

017083629
3316665S: RNCC: 3 | RNVC: 2

31 Mar 2023

5340-01-708-3682
Headless Straight Rod

017083682
37722-002: RNCC: 3 | RNVC: 2

3 Apr 2023

5340-01-708-3901
Rigid Connecting Link

017083901
3338400-127: RNCC: 3 | RNVC: 2

4 Apr 2023

5340-01-708-6216
Dust And Moisture Seal Protective Cap

017086216
406114: RNCC: 3 | RNVC: 2

13 Apr 2023

5340-01-708-9585
Bridge Clamp

017089585
100011: RNCC: 3 | RNVC: 2

3 May 2023

5340-01-708-4497
Retaining Strap

017084497
SLS-030-313-109: RNCC: 3 | RNVC: 2

6 Apr 2023

5340-01-710-4912
Access Cover

017104912
156-8537: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-667-8962
Mounting Bracket

016678962
149T6907Y9: RNCC: 3 | RNVC: 1
149T6907-9: RNCC: C | RNVC: 1

2 Nov 2017

5340-01-650-7954
Mounting Bracket

016507954
313T2380U1155: RNCC: 3 | RNVC: 1
313T2380-1155: RNCC: C | RNVC: 1

16 Dec 2015

5340-01-705-3903
Mounting Plate

017053903
SPA-2730-01: RNCC: 3 | RNVC: 2

19 Sep 2022

5340-01-698-5093
Loop Clamp

016985093
BACC10GF26CT: RNCC: 3 | RNVC: 2

20 Nov 2021

5340-01-697-8577
Utility Resilient Mount

016978577
AM-007-1: RNCC: 3 | RNVC: 2

14 Oct 2021

5340-01-699-5140
Access Cover

016995140
901-060-153-119: RNCC: 3 | RNVC: 2
901-060-153: RNCC: D | RNVC: 9

4 Feb 2022

5340-01-702-3703
Mounting Bracket

017023703
12610586: RNCC: 3 | RNVC: 2
12610586: RNCC: 5 | RNVC: 2

30 Jun 2022

5340-01-703-1046
Mounting Bracket

017031046
12612253-001: RNCC: 3 | RNVC: 2
12612253-001: RNCC: 5 | RNVC: 2
12612253: RNCC: D | RNVC: 9

17 Aug 2022

5340-01-703-1316
Mounting Plate

017031316
12613961: RNCC: 3 | RNVC: 2
12613961: RNCC: C | RNVC: 1

18 Aug 2022

5340-01-703-1353
Nut And Bolt Retainer

017031353
L1700234-009: RNCC: 3 | RNVC: 2
L1700234-009: RNCC: 5 | RNVC: 2
L1700234: RNCC: D | RNVC: 9

18 Aug 2022

5340-01-703-1405
Access Cover

017031405
12675029-201: RNCC: 3 | RNVC: 2
12675029: RNCC: D | RNVC: 9

18 Aug 2022

5340-01-703-1584
Multiple Angle Bracket

017031584
425754-1: RNCC: 3 | RNVC: 2

19 Aug 2022

5340-01-703-2527
Stand Base

017032527
RTT3410-WINSTD-30K-GAL-NP: RNCC: 3 | RNVC: 2

25 Aug 2022

5340-01-703-2865
Mounting Bracket

017032865
12683385: RNCC: 3 | RNVC: 2

26 Aug 2022

5340-01-703-3004
Plain Solid Disk

017033004
8668813-001: RNCC: 3 | RNVC: 2
8668813/FIND NO.1: RNCC: C | RNVC: 1
8668813: RNCC: D | RNVC: 9

29 Aug 2022

5340-01-703-3109
Mounting Bracket

017033109
63E920419G1: RNCC: 3 | RNVC: 2
PL63E920419G1: RNCC: D | RNVC: 9

29 Aug 2022

5340-01-705-3246
Webbing Strap

017053246
5-13-10245-1: RNCC: 3 | RNVC: 2
5-13-10245-1: RNCC: 5 | RNVC: 2
5-13-10245: RNCC: D | RNVC: 9

13 Sep 2022

5340-01-705-3750
Mounting Bracket

017053750
NGB550EY0120: RNCC: 3 | RNVC: 2
NGB550EY0120: RNCC: 5 | RNVC: 2

16 Sep 2022

5340-00-894-7089
Bridge Clamp

008947089
0-1015-45 PC 4A: RNCC: 3 | RNVC: 2
D3045: RNCC: 3 | RNVC: 2
NY560-1A4: RNCC: 5 | RNVC: 2
NY560-1PC4: RNCC: 5 | RNVC: 2
1218-616-8LN13: RNCC: 5 | RNVC: 2
777-57-0-8LN13: RNCC: 5 | RNVC: 2
183-54-1-16-471: RNCC: 5 | RNVC: 2
3700-135: RNCC: 5 | RNVC: 2
0-1015-45: RNCC: 5 | RNVC: 9
497-56-1-9LN226: RNCC: C | RNVC: 1

1 Jan 1962

5340-01-645-7552
Dust And Moisture Seal Protective Cap

016457552
1122948-504: RNCC: 3 | RNVC: 2
1122948-502: RNCC: 5 | RNVC: 9

26 Jun 2015

5340-01-645-3787
Clamp

016453787
TA06110C024NR: RNCC: 3 | RNVC: 2
TA06110C024NB: RNCC: 3 | RNVC: 2

13 Jun 2015

5340-01-701-7776
Bow Handle

017017776
B8-43-3: RNCC: 3 | RNVC: 2
J-B8-43 REV C: RNCC: D | RNVC: 9

7 Jun 2022

5340-00-352-0323
Loop Clamp

003520323
NAS1715: RNCC: 3 | RNVC: 1
NAS1715DT6TW: RNCC: 3 | RNVC: 2

2 Feb 1974

5340-01-703-0663
Sealing Plug Assembly

017030663
29519129: RNCC: 3 | RNVC: 2

15 Aug 2022

5340-01-577-2748
Retaining Strap

015772748
0216033-1: RNCC: 3 | RNVC: 2
0216033-1: RNCC: 5 | RNVC: 2
0216033: RNCC: D | RNVC: 9

1 Sep 2009

5340-01-700-7345
Rod End Locking Retainer

017007345
MS14198K4C: RNCC: 3 | RNVC: 2
NASM14198 REV 2: RNCC: D | RNVC: 9

11 Apr 2022

5340-00-948-7151
Dust And Moisture Seal Boot

009487151
PM21746: RNCC: 3 | RNVC: 2
21746: RNCC: 5 | RNVC: 9
21746: RNCC: 5 | RNVC: 9
21746: RNCC: 5 | RNVC: 9

11 Apr 1966

5340-01-700-8906
Retaining Strap

017008906
SS7565-20NBC: RNCC: 3 | RNVC: 2
SS7565-20NBC: RNCC: 5 | RNVC: 2
SS7565: RNCC: D | RNVC: 9

19 Apr 2022

5340-01-567-7685
Retaining Strap

015677685
2273394-1: RNCC: 3 | RNVC: 2
PPVV220: RNCC: 5 | RNVC: 9
2273394: RNCC: D | RNVC: 9

6 Oct 2008

5340-00-003-9244
Retaining Strap

000039244
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-10K: RNCC: 3 | RNVC: 2

9 Jun 1972

5340-01-179-9362
Swivel Caster

011799362
NAS1349: RNCC: 3 | RNVC: 2
FF-C-88: RNCC: 4 | RNVC: 1
9359R: RNCC: 5 | RNVC: 9
MS87968S101: RNCC: 5 | RNVC: 9

23 May 1984

5340-00-446-1331
Strapping

004461331
44Z12D2: RNCC: 3 | RNVC: 1
5915: RNCC: 3 | RNVC: 2
7G103: RNCC: 3 | RNVC: 9
4444P11: RNCC: 5 | RNVC: 9
D1106: RNCC: 5 | RNVC: 9
9-15B: RNCC: 5 | RNVC: 9
59158: RNCC: 5 | RNVC: 9
D10748-15A1: RNCC: 5 | RNVC: 9
190703: RNCC: 5 | RNVC: 9
D10748-15A1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-205-5184
Clamping Catch

002055184
SCB83314: RNCC: 3 | RNVC: 1
373-1049P10: RNCC: 3 | RNVC: 2
22196-3: RNCC: 3 | RNVC: 2
834: RNCC: 3 | RNVC: 2
USP214A7: RNCC: 3 | RNVC: 2
15834: RNCC: 3 | RNVC: 2
8825211-2: RNCC: 5 | RNVC: 2
SCB83314: RNCC: 5 | RNVC: 9
ES485-1: RNCC: 5 | RNVC: 9
SCB83314: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-618-3667
Rod End Locking Retainer

016183667
NAS1193: RNCC: 3 | RNVC: 1
NAS1193EK22C: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-01-665-5504
Bow Handle

016655504
NASM39087: RNCC: 3 | RNVC: 1
MS39087-402CB: RNCC: 3 | RNVC: 2
MS39087-402CB: RNCC: 5 | RNVC: 9

3 Aug 2017

5340-01-686-6750
Tie Down Adapter

016866750
F518-1K: RNCC: 3 | RNVC: 2
F518-1E: RNCC: 5 | RNVC: 9
3388: RNCC: D | RNVC: 9

27 Feb 2020

5340-00-074-2184
Spring Tension Clip

000742184
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B038-06C: RNCC: 3 | RNVC: 2

2 Aug 1967

5340-01-663-6195
Loop Clamp

016636195
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C3S: RNCC: 3 | RNVC: 2

16 May 2017

5340-01-663-6633
Loop Clamp

016636633
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C28S: RNCC: 3 | RNVC: 2

17 May 2017

5340-01-569-4322
Loop Clamp

015694322
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D4-10N: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-00-088-4812
Electrical-Mechanical Equipment Post

000884812
8218SS0632-7: RNCC: 3 | RNVC: 2
S07-8: RNCC: 5 | RNVC: 9
007260-6-12: RNCC: 5 | RNVC: 9
CP15-2-22C06-12: RNCC: 5 | RNVC: 9
US8218SS0632-7: RNCC: 5 | RNVC: 9
8218SS0632-7: RNCC: 5 | RNVC: 9
860314-8: RNCC: 5 | RNVC: 9
ES-5225-5: RNCC: 5 | RNVC: 9
8218-SS-0632: RNCC: 5 | RNVC: 9
12H4-06-X12C: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-072-3570
Spring Tension Clip

000723570
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-043: RNCC: 3 | RNVC: 2
100-300-12-0: RNCC: 5 | RNVC: 1
MS17160-143: RNCC: 5 | RNVC: 9
6018-99CC: RNCC: 5 | RNVC: 9
M24066/2-043: RNCC: 5 | RNVC: 9
MIL-C-24066: RNCC: 5 | RNVC: 9
M24066-2-043: RNCC: C | RNVC: 1

27 Jul 1967

5340-01-656-7632
Handle Grip

016567632
CL-250-SH-S: RNCC: 3 | RNVC: 2
MA250001-109: RNCC: 5 | RNVC: 2
MA520001-116: RNCC: 5 | RNVC: 2

18 Jul 2016

5340-01-572-9403
Retaining Strap

015729403
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C16W39N: RNCC: 3 | RNVC: 2

31 Mar 2009

NSN 5340-01-496-7121 014967121 CLAMP,LOOP

5340-01-496-7121
Loop Clamp

014967121
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D5-17N: RNCC: 3 | RNVC: 2
NAS1712D5-17N: RNCC: 5 | RNVC: 9

24 Apr 2002

5340-01-655-8492
Loop Clamp

016558492
344T2200-524: RNCC: 3 | RNVC: 1
344T2200-523: RNCC: 5 | RNVC: 9
654T0513-1689: RNCC: 5 | RNVC: 9

8 Jun 2016

5340-01-603-1793
Butt Hinge

016031793
F6-942-5: RNCC: 3 | RNVC: 2
HH13142-2: RNCC: 5 | RNVC: 2

23 Feb 2012

5340-01-029-1030
Webbing Strap

010291030
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10JD42: RNCC: 3 | RNVC: 2
NAS1212R10DJ39: RNCC: E | RNVC: 8

16 Oct 1976

5340-01-699-7947
Dust And Moisture Seal Protective Cap

016997947
1657402-1: RNCC: 3 | RNVC: 2

25 Feb 2022

5340-01-700-8667
Rigid Connecting Link

017008667
251A1120-7: RNCC: 3 | RNVC: 2

18 Apr 2022

5340-01-703-1398
Double Angle Bracket

017031398
1821336006: RNCC: 3 | RNVC: 2
PC423-00027: RNCC: 5 | RNVC: 2

18 Aug 2022

5340-01-626-0834
Spacing Threaded Standoff

016260834
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4F04: RNCC: 3 | RNVC: 2

26 Feb 2014

5340-00-598-4195
Loop Clamp

005984195
MS21919DG16: RNCC: 2 | RNVC: 2
MILC8603: RNCC: 4 | RNVC: 1
14-5182: RNCC: 5 | RNVC: 1
115-10-18: RNCC: 5 | RNVC: 1
812779: RNCC: 5 | RNVC: 1
214MS027P016: RNCC: 5 | RNVC: 1
14-5182: RNCC: 5 | RNVC: 1
10-53729: RNCC: 5 | RNVC: 1
214MS027P016: RNCC: 5 | RNVC: 1
5096D32: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-503-5542
Ac Dryer Bracket

015035542
26-0449: RNCC: 3 | RNVC: 2
7138478: RNCC: 5 | RNVC: 9
7138478: RNCC: 5 | RNVC: 9

23 Dec 2002

5340-01-191-5169
Electrical-Mechanical Equipment Post

011915169
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E14: RNCC: 3 | RNVC: 2
600951-02: RNCC: 5 | RNVC: 2
9742-SS-0632-7: RNCC: 5 | RNVC: 9
600055P161: RNCC: 7 | RNVC: 2
RH-5.01OHMPORM3 PA: RNCC: C | RNVC: 1

10 Oct 1984

5340-01-383-8512
Helical Compression Spring Retainer

013838512
036-27549-0: RNCC: 3 | RNVC: 1
036-27549-0: RNCC: 5 | RNVC: 1
036-27549VM: RNCC: 5 | RNVC: 2
036-27549-0VM: RNCC: 5 | RNVC: 2
036-27549: RNCC: 5 | RNVC: 9
036-27549: RNCC: C | RNVC: 1

4 Dec 1993

5340-01-344-2560
Loop Clamp

013442560
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C16TW: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-01-355-8455
Dust And Moisture Seal Protective Cap

013558455
NAS835: RNCC: 3 | RNVC: 1
NAS835N5A: RNCC: 3 | RNVC: 2
MIL-C-5501/3: RNCC: 5 | RNVC: 9
M5501/3-5G: RNCC: 5 | RNVC: 9

25 Mar 1992

5340-00-562-5243
Manual Control Lever

005625243
5625243: RNCC: 3 | RNVC: 2
1025005625243: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-833-0590
Angle Bracket

008330590
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743BP12: RNCC: 3 | RNVC: 2
AN743BP12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-470-5133
Loop Clamp

014705133
HS5773DC17NB: RNCC: 3 | RNVC: 2
JM44LC91WDC17NB: RNCC: 5 | RNVC: 2
HX5773DC17NB: RNCC: 5 | RNVC: 9
TA027043DC17NB: RNCC: 5 | RNVC: 9
JM44LC91DC17NB: RNCC: 5 | RNVC: 9

22 Dec 1999

5340-01-057-1207
Loop Clamp

010571207
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C4KW: RNCC: 3 | RNVC: 2
MS21122C4: RNCC: 5 | RNVC: 9
MS21122WC4: RNCC: 5 | RNVC: 9
5340PL1737010: RNCC: 6 | RNVC: 9
5340PL0578683: RNCC: 6 | RNVC: 9

6 Mar 1978

5340-00-014-0008
Dust And Moisture Seal Protective Plug

000140008
NAS820: RNCC: 3 | RNVC: 1
NAS820-12A: RNCC: 3 | RNVC: 2
NAS820-12A: RNCC: 5 | RNVC: 2
NAS820-12A: RNCC: 5 | RNVC: 2
NAS820-12-12S: RNCC: 5 | RNVC: 9
EP12: RNCC: 5 | RNVC: 9
10160008: RNCC: 6 | RNVC: 9

10 May 1968

5340-00-057-2625
Butt Hinge

000572625
MS20257P1-3600: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
MS20257-1-350: RNCC: 5 | RNVC: 1
MS20257P1-3600: RNCC: 5 | RNVC: 1
MS20257P-3600: RNCC: 5 | RNVC: 1
MS20257-1-650: RNCC: 5 | RNVC: 1
MS20257-1-1875: RNCC: 5 | RNVC: 1
MS20257-1-1750: RNCC: 5 | RNVC: 1
MS20257P1-380: RNCC: 5 | RNVC: 9
MS20257-1-1-600: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-579-7318
Angle Bracket

015797318
MS9165-06: RNCC: 2 | RNVC: 2
MS9165: RNCC: 4 | RNVC: 1

20 Nov 2009

5340-01-671-6191
Spring Tension Clip

016716191
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-14N: RNCC: 3 | RNVC: 2

4 Apr 2018

5340-01-667-8540
Loop Clamp

016678540
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C96: RNCC: 3 | RNVC: 2
AS7351C96: RNCC: 3 | RNVC: 9
AS7351C96: RNCC: 5 | RNVC: 9

1 Nov 2017

5340-01-668-0819
Access Cover

016680819
5-1-4366: RNCC: 1 | RNVC: 2
602509: RNCC: 3 | RNVC: 2
600171: RNCC: 5 | RNVC: 9
600171: RNCC: 5 | RNVC: 9

8 Nov 2017

5340-01-702-0232
Mounting Bracket

017020232
12596579: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-1723
Access Cover

017021723
12593923: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1727
Access Cover

017021727
12596770: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1722
Access Cover

017021722
12596426: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1871
Vent Plug

017021871
820-8225964: RNCC: 3 | RNVC: 1

23 Jun 2022

5340-01-702-1811
Block Clamp

017021811
270T0005-373: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1612
Mounting Bracket

017021612
12596401: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-0100
Mounting Bracket

017020100
12594789: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9863
Mounting Bracket

017019863
12617951: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9865
Mounting Bracket

017019865
12617950: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9985
Angle Bracket

017019985
12618177: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9989
Mounting Bracket

017019989
12594539: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9903
Mounting Bracket

017019903
12597001: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9790
Access Cover

017019790
12596235: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0011
Mounting Plate

017020011
12617473: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0191
Mounting Bracket

017020191
12596471: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-5988
Access Cover

017025988
JG.OEM.AD.CV.ASSY-B: RNCC: 3 | RNVC: 2
0N842480-2: RNCC: 5 | RNVC: 9
0N842480: RNCC: 7 | RNVC: 2

18 Jul 2022

5340-01-702-6087
Mounting Bracket

017026087
12615010: RNCC: 3 | RNVC: 2
12615010: RNCC: 5 | RNVC: 2

18 Jul 2022

5340-01-702-6072
Spacing Threaded Standoff

017026072
8028-080-4108: RNCC: 3 | RNVC: 2

18 Jul 2022

5340-01-702-0268
Manual Control Lever

017020268
12617700: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0754
Rigid Connecting Link

017020754
988-0823: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0558
Mounting Plate

017020558
12596676: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0209
Mounting Bracket

017020209
12617883: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0612
Mounting Plate

017020612
12596798: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0469
Manual Control Handle

017020469
ZB-2202SS: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0595
Mounting Bracket

017020595
12594779: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0569
Quick Release Plunger

017020569
717-6-1/2X13-AK-ST: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0882
Mounting Plate

017020882
12594633: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0552
Mounting Plate

017020552
12618203: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0910
Rigid Connecting Link

017020910
12596573: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0907
Rigid Connecting Link

017020907
12596859: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-1025
Block Clamp

017021025
270T0005-574: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0553
Mounting Plate

017020553
12617410: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0418
Catch Strike

017020418
12596820: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-1279
Webbing Strap

017021279
12593921-16: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1368
Angle Bracket

017021368
12639319: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-0224
Mounting Bracket

017020224
12596473: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0755
Mounting Bracket

017020755
988-0806-002: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0930
Manual Control Handle

017020930
988-0015: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0757
Mounting Plate

017020757
988-0358: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-1386
Angle Bracket

017021386
12639173: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-701-8062
Rigid Connecting Link

017018062
113T1232-25: RNCC: 3 | RNVC: 1

9 Jun 2022

5340-01-701-7380
Access Cover

017017380
180263: RNCC: 3 | RNVC: 2

6 Jun 2022

5340-01-701-9746
Mounting Plate

017019746
12617520: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9739
Access Cover

017019739
12617664: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-4859
Loop Clamp

017024859
UBX-1315: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-701-7555
Mounting Bracket

017017555
184608: RNCC: 3 | RNVC: 2

6 Jun 2022

5340-01-702-4892
Mounting Bracket

017024892
8599088-001: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-699-9676
Mounting Bracket

016999676
HA6049A01SP: RNCC: 3 | RNVC: 2

9 Mar 2022

5340-01-699-1605
Access Cover

016991605
863-220072: RNCC: 3 | RNVC: 2

12 Jan 2022

5340-01-700-6747
Thumb Latch

017006747
2007665-1: RNCC: 3 | RNVC: 2

6 Apr 2022

5340-01-700-6523
Access Cover

017006523
06351-08016-041: RNCC: 3 | RNVC: 2

5 Apr 2022

5340-01-700-6941
Shaft Collar

017006941
D52680-002: RNCC: 3 | RNVC: 2
D60881-00A REV 3 ITEM 3: RNCC: C | RNVC: 1

7 Apr 2022

5340-01-700-7270
Mounting Plate

017007270
F54037: RNCC: 3 | RNVC: 2
D60881-00A REV 3 ITEM 1: RNCC: 5 | RNVC: 9
D60881: RNCC: D | RNVC: 9

11 Apr 2022

5340-01-701-0670
Rigid Connecting Link

017010670
113T1733-22: RNCC: 3 | RNVC: 1

25 Apr 2022

5340-01-701-0227
Snap-In Plain Standoff

017010227
77C734951G9: RNCC: 3 | RNVC: 2
77C734951/GROUP 9: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-701-0305
Retaining Harness

017010305
5-19-15367: RNCC: 3 | RNVC: 2

22 Apr 2022

5340-01-701-0173
Runner

017010173
518-7271077-ITEM NO 14: RNCC: 3 | RNVC: 2
2018-123-ITEM NO 14: RNCC: 5 | RNVC: 2

22 Apr 2022

5340-01-701-0777
Bumper

017010777
264475: RNCC: 3 | RNVC: 2

26 Apr 2022

5340-01-701-0567
Angle Bracket

017010567
06100-08470-103: RNCC: 3 | RNVC: 2
06100-08470: RNCC: D | RNVC: 9

25 Apr 2022

5340-01-700-3670
Grooved Clamp Coupling

017003670
112408: RNCC: 3 | RNVC: 2

24 Mar 2022

5340-01-700-3119
Cushioning Pad

017003119
B003310M05024-0021: RNCC: 3 | RNVC: 2
B003310M05024: RNCC: D | RNVC: 9

23 Mar 2022

5340-01-700-3534
Mounting Bracket

017003534
801706-59-A: RNCC: 3 | RNVC: 2
801635-541/ PC NO 5: RNCC: C | RNVC: 1
801635-541: RNCC: D | RNVC: 9

24 Mar 2022

5340-01-700-4254
Mounting Bracket

017004254
09010B1420-0: RNCC: 3 | RNVC: 2

29 Mar 2022

5340-01-701-1620
Mounting Bracket

017011620
001-001304-000: RNCC: 3 | RNVC: 2
001-001304: RNCC: D | RNVC: 9

2 May 2022

5340-01-702-2885
Bumper

017022885
449-215-002-117: RNCC: 3 | RNVC: 2
449-215-002: RNCC: D | RNVC: 9

27 Jun 2022

5340-01-702-2973
Spacing Threaded Standoff

017022973
P0032091: RNCC: 3 | RNVC: 2

27 Jun 2022

5340-01-702-3025
Angle Bracket

017023025
3654AS202-1: RNCC: 3 | RNVC: 2
3654AS202-1: RNCC: 5 | RNVC: 2
3654AS202: RNCC: D | RNVC: 9

28 Jun 2022

5340-01-702-3071
Bow Handle

017023071
1TD1355A10010-1001: RNCC: 3 | RNVC: 2

28 Jun 2022

5340-01-702-2398
Access Cover

017022398
182086: RNCC: 3 | RNVC: 2

23 Jun 2022

5340-01-701-5897
Manual Control Lever

017015897
12647507: RNCC: 3 | RNVC: 2

25 May 2022

5340-01-701-0190
Dust And Moisture Seal Protective Cap

017010190
340HS001G25-8N: RNCC: 3 | RNVC: 2

22 Apr 2022

5340-01-701-0517
Dust And Moisture Seal Protective Cap

017010517
TDA SERUR32 9: RNCC: 3 | RNVC: 2

25 Apr 2022

Load More Results