What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 21 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 21 of 1045

5340-00-194-3669
Dust And Moisture Seal Protective Cap

001943669
NAS947: RNCC: 3 | RNVC: 1
NAS947-48: RNCC: 3 | RNVC: 2

18 Mar 1970

5340-01-278-3009
Electrical-Mechanical Equipment Post

012783009
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6G16: RNCC: 3 | RNVC: 2
9758-SS-0832: RNCC: E | RNVC: 8

4 May 1988

5340-01-478-1831
Dust And Moisture Seal Protective Cap

014781831
M5501/14-4: RNCC: 2 | RNVC: 2
MIL-C-5501/14: RNCC: 4 | RNVC: 1
NAS841-4: RNCC: 5 | RNVC: 1

31 Aug 2000

5340-01-687-2217
Retaining Strap

016872217
NASM85449/1: RNCC: 3 | RNVC: 1
AS85449/1-10: RNCC: 5 | RNVC: 9

24 Mar 2020

5340-01-686-8763
Loop Clamp

016868763
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-22N: RNCC: 3 | RNVC: 2

9 Mar 2020

5340-01-686-9501
Loop Clamp

016869501
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-6N: RNCC: 3 | RNVC: 2

11 Mar 2020

5340-01-674-1385
Webbing Strap

016741385
MBD-1004: RNCC: 3 | RNVC: 2
HLS-1019: RNCC: 5 | RNVC: 9

13 Jul 2018

5340-01-690-2302
Butt Hinge

016902302
8599331-001: RNCC: 3 | RNVC: 2
NHSTS1122: RNCC: 5 | RNVC: 2

31 Jul 2020

5340-01-702-8213
Dust And Moisture Seal Protective Cap

017028213
8827680: RNCC: 3 | RNVC: 2
8827680 REV-: RNCC: D | RNVC: 9

30 Jul 2022

5340-01-579-0250
Loop Clamp

015790250
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF07: RNCC: 3 | RNVC: 2
AS21919WDF07: RNCC: 5 | RNVC: 9
AS21919WDF7: RNCC: 5 | RNVC: 9

28 Oct 2009

5340-01-665-6442
Loop Clamp

016656442
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-20N: RNCC: 3 | RNVC: 2

7 Aug 2017

5340-01-697-9500
Loop Clamp

016979500
30-302-2D12J23: RNCC: 3 | RNVC: 2

20 Oct 2021

5340-01-698-0530
Loop Clamp

016980530
30-302-2D23J13: RNCC: 3 | RNVC: 2
30-302-2D23J13: RNCC: 5 | RNVC: 2
30-302-2D23J13: RNCC: 5 | RNVC: 2
30-302-2D23J13: RNCC: 5 | RNVC: 2
30-302-2D23J13: RNCC: 5 | RNVC: 2

26 Oct 2021

5340-01-698-0940
Shaft Collar

016980940
RC90-B-R: RNCC: 3 | RNVC: 2

28 Oct 2021

5340-01-699-1402
Mounting Bracket

016991402
8928645: RNCC: 3 | RNVC: 2

11 Jan 2022

5340-01-699-4128
Manual Control Handle

016994128
F11.07370-0022: RNCC: 3 | RNVC: 2

28 Jan 2022

5340-01-700-4888
Loop Clamp

017004888
30-302-2C19J18: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

30 Mar 2022

5340-01-700-7385
Threaded Rod End

017007385
8598798-003: RNCC: 3 | RNVC: 2
8598798: RNCC: D | RNVC: 9

12 Apr 2022

5340-01-700-8489
Access Door Hinge

017008489
137020: RNCC: 3 | RNVC: 2

16 Apr 2022

5340-01-703-2795
Mounting Bracket

017032795
8437107-1: RNCC: 3 | RNVC: 2
8437107: RNCC: D | RNVC: 9

26 Aug 2022

5340-01-705-8035
Extension Drawer Slide Section

017058035
156231-L: RNCC: 3 | RNVC: 2

13 Oct 2022

5340-01-701-9072
Electronic Equipment Hardware Kit

017019072
306706-U: RNCC: 3 | RNVC: 2

15 Jun 2022

5340-00-163-9727
Spring Tension Clip

001639727
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B034-05C: RNCC: 3 | RNVC: 2

7 Feb 1973

5340-01-655-7092
Positioning Thrust Stop

016557092
149T6971Y13: RNCC: 3 | RNVC: 2
149T6971-13: RNCC: C | RNVC: 1

6 Jun 2016

5340-01-623-0034
Butt Hinge

016230034
MS20001PA3-1739: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

29 Oct 2013

5340-01-629-7055
Spacing Threaded Standoff

016297055
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5C32: RNCC: 3 | RNVC: 2

11 Jul 2014

5340-01-658-2484
Utility Resilient Mount

016582484
C1001A9011-3: RNCC: 1 | RNVC: 2
70750-1: RNCC: 3 | RNVC: 2
562R250H01: RNCC: 5 | RNVC: 2

20 Sep 2016

5340-01-659-9013
Retaining Strap

016599013
12603042-003: RNCC: 3 | RNVC: 2
12603042-003: RNCC: 3 | RNVC: 2
HS408H: RNCC: 3 | RNVC: 2

21 Dec 2016

5340-01-661-6024
Retaining Strap

016616024
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D19-42N: RNCC: 3 | RNVC: 2

9 Mar 2017

5340-01-663-3337
Loop Clamp

016633337
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C12SWH: RNCC: 3 | RNVC: 2

5 May 2017

5340-01-663-5731
Loop Clamp

016635731
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-3S: RNCC: 3 | RNVC: 2

15 May 2017

5340-01-663-6621
Loop Clamp

016636621
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C44SW: RNCC: 3 | RNVC: 2

17 May 2017

5340-01-664-5053
Handle Grip

016645053
115295: RNCC: 3 | RNVC: 2
2C081: RNCC: 5 | RNVC: 2
50390-312: RNCC: 5 | RNVC: 9

22 Jun 2017

5340-01-699-1838
Dust And Moisture Seal Protective Cover

016991838
00-973008: RNCC: 3 | RNVC: 2

13 Jan 2022

5340-01-697-9570
Dust And Moisture Seal Protective Cap

016979570
801-6640796ASSY69AL1: RNCC: 3 | RNVC: 1
801-6640796PC69A: RNCC: 5 | RNVC: 1

20 Oct 2021

5340-01-015-8820
Angle Bracket

010158820
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-094: RNCC: 3 | RNVC: 2
MS9592-094: RNCC: 3 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 1
MS9592-094: RNCC: 5 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 9

30 Jan 1976

5340-01-709-1038
Rigid Connecting Link

017091038
114R3434-5: RNCC: 3 | RNVC: 2

11 May 2023

5340-01-710-6733
Manual Control Handle

017106733
100018871: RNCC: 3 | RNVC: 2

15 Jun 2023

5340-01-710-6762
Mounting Plate

017106762
100019569: RNCC: 3 | RNVC: 2

15 Jun 2023

5340-01-710-6793
Mounting Bracket

017106793
100020119: RNCC: 3 | RNVC: 2

15 Jun 2023

5340-01-710-6461
Mounting Bracket

017106461
100020674: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-706-9778
Vehicular Door Handle

017069778
03099-10506AN: RNCC: 3 | RNVC: 2
13079196: RNCC: 7 | RNVC: 2

6 Jan 2023

5340-01-523-7402
Manual Control Lever

015237402
233-9531: RNCC: 3 | RNVC: 2
233-9531: RNCC: 5 | RNVC: 2
U-MOT-TNA-012: RNCC: 5 | RNVC: 2
A22805: RNCC: 5 | RNVC: 2

14 Sep 2004

5340-01-501-4808
Mater Aircraft Plug

015014808
SAE-AS3121: RNCC: 3 | RNVC: 1
AS3121-04: RNCC: 3 | RNVC: 2
AS3121-04: RNCC: 3 | RNVC: 2
AS3121-04: RNCC: 5 | RNVC: 9

3 Oct 2002

5340-01-679-1610
Adaptor Assembly

016791610
GA45GC: RNCC: 3 | RNVC: 2
88852458: RNCC: 5 | RNVC: 2
7488852458: RNCC: 5 | RNVC: 2

12 Mar 2019

5340-01-683-8039
Loop Clamp

016838039
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-7S: RNCC: 3 | RNVC: 2

8 Oct 2019

5340-01-625-3291
Butt Hinge

016253291
MS20001C4-175: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

31 Jan 2014

5340-01-607-3492
Spring Tension Clip

016073492
29546593: RNCC: 3 | RNVC: 2
1229704: RNCC: 5 | RNVC: 2

8 Jun 2012

5340-01-607-6725
Retaining Strap

016076725
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D9W26N: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-01-608-7598
Loop Clamp

016087598
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C8-12S: RNCC: 3 | RNVC: 2

10 Jul 2012

5340-01-654-8618
Loop Clamp

016548618
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-11SW: RNCC: 3 | RNVC: 2

11 May 2016

5340-01-701-5362
Electronic Equipment Hardware Kit

017015362
12272-7421-01: RNCC: 3 | RNVC: 2

20 May 2022

5340-01-708-9917
Mounting Bracket

017089917
70-1031-12: RNCC: 3 | RNVC: 2

4 May 2023

5340-01-710-3476
Mounting Bracket

017103476
ARA-22: RNCC: 3 | RNVC: 2

26 May 2023

5340-01-708-7124
Corrosion Preventive Anode

017087124
158351: RNCC: 3 | RNVC: 2

18 Apr 2023

5340-01-708-9923
Turnbuckle

017089923
HG-227-1-1/4X18: RNCC: 3 | RNVC: 2
1032279: RNCC: 5 | RNVC: 2

4 May 2023

5340-01-710-5008
Mounting Plate

017105008
952222: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-624-5492
Angle Bracket

016245492
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-027: RNCC: 3 | RNVC: 2
MS9600-027: RNCC: 3 | RNVC: 9

7 Jan 2014

5340-01-699-2979
Dust And Moisture Seal Protective Cover

016992979
NC1WH6: RNCC: 3 | RNVC: 2

22 Jan 2022

5340-01-708-8464
Dust And Moisture Seal Protective Cap-Plug Set

017088464
12193-9988-01: RNCC: 3 | RNVC: 2

27 Apr 2023

5340-01-708-3377
Mounting Plate

017083377
6455908P1: RNCC: 3 | RNVC: 2

30 Mar 2023

5340-01-708-7754
Bumper

017087754
9546K97: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-708-7772
Dust And Moisture Seal Boot

017087772
809A060-6: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-708-3077
Mounting Bracket

017083077
001-002498-000: RNCC: 3 | RNVC: 2

29 Mar 2023

5340-01-708-5992
Permanent Magnet

017085992
8022: RNCC: 3 | RNVC: 2

12 Apr 2023

5340-01-708-8738
Access Cover

017088738
116532048: RNCC: 3 | RNVC: 2

27 Apr 2023

5340-01-709-1239
Spacing Threaded Standoff

017091239
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

12 May 2023

5340-01-708-7816
Rigid Connecting Link

017087816
74779-1: RNCC: 3 | RNVC: 2

22 Apr 2023

5340-01-708-4599
Corrosion Preventive Anode

017084599
633-4525: RNCC: 3 | RNVC: 2

7 Apr 2023

5340-01-709-2501
Spacing Threaded Standoff

017092501
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

19 May 2023

5340-01-709-2507
Spacing Threaded Standoff

017092507
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

19 May 2023

5340-01-709-2015
Dust And Moisture Seal Protective Cap-Plug

017092015
VKA38S: RNCC: 3 | RNVC: 2

17 May 2023

5340-01-708-2905
Mounting Bracket

017082905
001-000018-000: RNCC: 3 | RNVC: 2

28 Mar 2023

5340-01-708-1858
Dust And Moisture Seal Protective Cover

017081858
186718-1: RNCC: 3 | RNVC: 2

20 Mar 2023

5340-01-708-7657
Mounting Bracket

017087657
AM-312: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-709-0459
Webbing Strap

017090459
12667079-025: RNCC: 3 | RNVC: 2

8 May 2023

5340-01-709-1241
Spacing Threaded Standoff

017091241
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

12 May 2023

5340-01-709-1570
Spacing Threaded Standoff

017091570
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

15 May 2023

5340-01-708-4818
Mounting Plate

017084818
19212-2037-11: RNCC: 3 | RNVC: 2

8 Apr 2023

5340-01-618-1177
Loop Clamp

016181177
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG33: RNCC: 3 | RNVC: 2
AS21919WDG33: RNCC: 3 | RNVC: 9
MS21919WDG33: RNCC: 5 | RNVC: 9

12 Apr 2013

5340-01-596-7168
Tray Assembly

015967168
R02659_HST-5_S7UE1000-44-40-NN: RNCC: 3 | RNVC: 2
R02659-HST-5-S7UE1000-44-40-NN: RNCC: 3 | RNVC: 2

23 May 2011

5340-00-281-1458
Expansion Shield

002811458
AA1923-304: RNCC: 2 | RNVC: 2
A-A-1923: RNCC: 4 | RNVC: 1
FFS325: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-579-5320
Angle Bracket

015795320
MS9165-01: RNCC: 2 | RNVC: 2
MS9165: RNCC: 4 | RNVC: 1

16 Nov 2009

5340-01-580-9177
Retaining Strap

015809177
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D18-42N: RNCC: 3 | RNVC: 2

30 Dec 2009

5340-01-341-4048
Spacing Threaded Standoff

013414048
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D12: RNCC: 3 | RNVC: 2
NAS1831-D12: RNCC: C | RNVC: 1

28 Jun 1991

NSN 5340-01-588-1838 015881838 PADLOCK SET

5340-01-588-1838
Padlock Set

015881838
AA594861AB30S3S: RNCC: 2 | RNVC: 2
AA59486-1AB30S3S: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1

7 Sep 2010

5340-00-141-6566
Plug Button

001416566
NAS451: RNCC: 3 | RNVC: 1
NAS-451-29: RNCC: 3 | RNVC: 2
51061: RNCC: 5 | RNVC: 9
51061: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-581-4637
Loop Clamp

015814637
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D19-38N: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-01-577-9278
Loop Clamp

015779278
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D08: RNCC: 3 | RNVC: 2
AS5587D08: RNCC: 3 | RNVC: 9

22 Sep 2009

5340-01-568-0049
Loop Clamp

015680049
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281F3: RNCC: 3 | RNVC: 2
MS25281-F3: RNCC: 3 | RNVC: 2
MS25281F3: RNCC: 3 | RNVC: 9

16 Oct 2008

5340-01-562-9279
Butt Hinge Leaf

015629279
MS20001CXA4-200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

25 Apr 2008

5340-01-554-9319
Loop Clamp

015549319
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C5: RNCC: 3 | RNVC: 2
AN735C5: RNCC: 5 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 9

23 Aug 2007

5340-01-184-8835
Spring Tension Clip

011848835
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-302: RNCC: 5 | RNVC: 9
M24066/2-102: RNCC: 5 | RNVC: 9

24 Jul 1984

5340-01-344-3351
Butt Hinge Leaf

013443351
MS20001Y6-600: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

27 Aug 1991

5340-01-453-2928
Butt Hinge

014532928
AA55593-12D: RNCC: 2 | RNVC: 2
A-A-55593: RNCC: 4 | RNVC: 1
MS35826-12D: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-00-005-0537
Loop Clamp

000050537
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D11NH: RNCC: 3 | RNVC: 2
MS9352-10: RNCC: 5 | RNVC: 9

19 Jun 1972

5340-00-001-9727
Rim Lock Set

000019727
FFH106-160E-4: RNCC: 2 | RNVC: 2
FF-H-106: RNCC: 4 | RNVC: 1
A55PDPLY28: RNCC: 5 | RNVC: 9

29 Sep 1972

5340-01-545-1357
Rectangula Clamp(1)

015451357
30-302-2D14J06: RNCC: 1 | RNVC: 2
30-302-2D14J06: RNCC: 3 | RNVC: 2
30-302-2D14J06: RNCC: 3 | RNVC: 2
30-302-2D14J06: RNCC: 3 | RNVC: 2
30-302-2D14J06: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

2 Nov 2006

5340-01-545-1355
Rectangula Clamp(1)

015451355
30-302-2D15J15: RNCC: 1 | RNVC: 2
30-302-2D15J15: RNCC: 3 | RNVC: 2
30-302-2D15J15: RNCC: 3 | RNVC: 2
30-302-2D15J15: RNCC: 3 | RNVC: 2
30-302-2D15J15: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

2 Nov 2006

5340-01-710-7117
Dust And Moisture Seal Protective Plug

017107117
941172: RNCC: 3 | RNVC: 2
5029688: RNCC: D | RNVC: 9

20 Jun 2023

5340-01-710-7337
Mounting Bracket

017107337
A1-55260D: RNCC: 3 | RNVC: 2

21 Jun 2023

5340-01-710-7372
Block Clamp

017107372
801-6758791-PC-NO-294-1: RNCC: 3 | RNVC: 2
2620-286-47-PC-NO-294-1: RNCC: C | RNVC: 1

21 Jun 2023

5340-01-543-3572
Loop Clamp

015433572
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D24-12N: RNCC: 3 | RNVC: 2

11 Sep 2006

5340-01-544-5805
Blank Panel

015445805
70301-01800-106: RNCC: 1 | RNVC: 2
69855-001: RNCC: 3 | RNVC: 2
0017-0493: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-01-555-7427
Access Cover

015557427
8S4304: RNCC: 3 | RNVC: 2
8S-4304: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-01-344-3358
Butt Hinge Leaf

013443358
MS20001PH5-460: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

27 Aug 1991

5340-01-710-7911
Multiple Angle Bracket

017107911
12641870: RNCC: 3 | RNVC: 2
12641870: RNCC: C | RNVC: 1

26 Jun 2023

5340-01-701-5741
Access Cover

017015741
3A4092-1: RNCC: 3 | RNVC: 2

24 May 2022

5340-01-706-3320
Dust And Moisture Seal Protective Cap

017063320
NAS831-20: RNCC: 3 | RNVC: 2

16 Nov 2022

5340-01-710-6680
Access Cover

017106680
18-247: RNCC: 3 | RNVC: 2

14 Jun 2023

5340-01-711-0196
Dust And Moisture Seal Protective Cap

017110196
CA121004-78: RNCC: 3 | RNVC: 2
12646041: RNCC: 7 | RNVC: 2
12646041: RNCC: C | RNVC: 1

14 Jul 2023

5340-01-710-9613
Access Cover

017109613
5-13-10965-2: RNCC: 3 | RNVC: 2
5-13-10965: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-9753
Mounting Bracket

017109753
5-13-10491-1: RNCC: 3 | RNVC: 2
5-13-10491-1: RNCC: 5 | RNVC: 2
5-13-10491: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-342-6912
Electrical-Mechanical Equipment Post

013426912
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B6D14: RNCC: 3 | RNVC: 2
688015-045: RNCC: E | RNVC: 8

29 Jul 1991

5340-01-341-3425
Electrical-Mechanical Equipment Post

013413425
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B6E14: RNCC: 3 | RNVC: 2

27 Jun 1991

5340-01-341-4050
Spacing Threaded Standoff

013414050
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C05: RNCC: 3 | RNVC: 2

2 Jul 2014

5340-01-538-3119
Swivel Caster

015383119
A-A-55619-8SUB: RNCC: 2 | RNVC: 2
AA55619-8SUB: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1

17 Mar 2006

5340-01-528-7504
Aircraft Loop Clamp

015287504
NASM85449/4: RNCC: 3 | RNVC: 1
M85449/4-20: RNCC: 3 | RNVC: 2
M85449/4-20: RNCC: 5 | RNVC: 9

24 Mar 2005

5340-01-528-8434
Retaining Strap

015288434
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D26-43N: RNCC: 3 | RNVC: 2

28 Mar 2005

5340-00-899-2865
Grooved Clamp Coupling

008992865
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-13B: RNCC: 3 | RNVC: 2
35H14-3-338-1: RNCC: 5 | RNVC: 1
8131A4M-338Z: RNCC: 5 | RNVC: 1
57464-338B: RNCC: 5 | RNVC: 1
MS27114-13B: RNCC: 5 | RNVC: 9
AS5355/1-13B: RNCC: 5 | RNVC: 9
SAE AS5355: RNCC: 5 | RNVC: 9
AS5355/1-13B: RNCC: 5 | RNVC: 9

3 Feb 1967

5340-01-446-4816
Seal Retaining Plate

014464816
H71435/S: RNCC: 3 | RNVC: 2
US71435-1-1: RNCC: 5 | RNVC: 2
US71435 ITEM NO H71435-1-1: RNCC: 5 | RNVC: 2
H47777-A01: RNCC: 5 | RNVC: 9
US71435 ITEM NO H71435-1-1: RNCC: 5 | RNVC: 9
H47777-A01: RNCC: 5 | RNVC: 9

4 Jul 1997

5340-01-708-3392
Double Angle Bracket

017083392
17008A0601: RNCC: 3 | RNVC: 2

30 Mar 2023

5340-01-708-6030
Dust And Moisture Seal Protective Plug

017086030
00-973078: RNCC: 3 | RNVC: 2

12 Apr 2023

5340-01-535-3753
Webbing Strap

015353753
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10BJ65: RNCC: 3 | RNVC: 2
NAS1212R10BJ65: RNCC: 3 | RNVC: 9

28 Nov 2005

5340-01-521-5155
Aircraft Loop Clamp

015215155
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D4-8N: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-01-542-1112
Retaining Strap

015421112
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D15-30N: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-01-535-3761
Webbing Strap

015353761
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10B25: RNCC: 3 | RNVC: 2
NAS1213R10B25: RNCC: 3 | RNVC: 9

28 Nov 2005

5340-01-525-2671
Dust And Moisture Seal Protective Cap-Plug

015252671
NAS834: RNCC: 3 | RNVC: 1
NAS834-86: RNCC: 3 | RNVC: 2

2 Nov 2004

5340-01-511-6838
Retaining Strap

015116838
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C16W31N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-6898
Retaining Strap

015116898
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D25-46N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-6887
Retaining Strap

015116887
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-28N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-511-6942
Loop Clamp

015116942
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-9N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-517-8581
Loop Clamp

015178581
X007830: RNCC: 3 | RNVC: 2
1344553: RNCC: 5 | RNVC: 2
D01340P006000: RNCC: 5 | RNVC: 2
X005921: RNCC: 5 | RNVC: 9

23 Feb 2004

5340-01-501-4836
Aircraft Clamp Loop

015014836
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C15W40N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-485-5848
Aircraft Loop Clamp

014855848
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C6-12N: RNCC: 3 | RNVC: 2

31 May 2001

5340-01-385-3737
Spacing Threaded Standoff

013853737
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C07: RNCC: 3 | RNVC: 2

30 Oct 1985

5340-01-501-4714
Air Retaining Strap

015014714
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W28N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-501-4804
Air Retaining Strap

015014804
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10-64T: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-485-5765
Air Butt Hinge Leaf

014855765
MS20001PXA5-650: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

31 May 2001

5340-01-706-7883
Mounting Bracket

017067883
8M0061365: RNCC: 3 | RNVC: 2

19 Dec 2022

5340-01-706-8622
Rod End Clevis

017068622
437-4031: RNCC: 3 | RNVC: 2

27 Dec 2022

5340-01-706-9777
Electromagnetic Lock

017069777
94987-72894: RNCC: 3 | RNVC: 2
18-021: RNCC: 5 | RNVC: 9

6 Jan 2023

5340-01-707-6441
Multiple Angle Bracket

017076441
00-941182: RNCC: 3 | RNVC: 2

14 Feb 2023

5340-01-707-6737
Retaining Strap

017076737
145S1903-4: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-707-5069
Bail Handle

017075069
68373-13: RNCC: 3 | RNVC: 2

6 Feb 2023

5340-01-707-5079
Clamp Bolt Assembly

017075079
74684-1: RNCC: 3 | RNVC: 2

6 Feb 2023

5340-01-708-1363
Extension Drawer Slide

017081363
150QD-24: RNCC: 3 | RNVC: 2
150QD-24-P: RNCC: 3 | RNVC: 2

16 Mar 2023

5340-01-474-3052
Aircr Mending Plate

014743052
SAE-AS9551: RNCC: 3 | RNVC: 1
MS9551-008: RNCC: 3 | RNVC: 2
MS9551-008: RNCC: 5 | RNVC: 9
MS9551-008: RNCC: 5 | RNVC: 9

1 May 2000

5340-01-468-8806
Retaining Strap

014688806
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D6W24N: RNCC: 3 | RNVC: 2

26 Oct 1999

5340-01-470-6386
Loop Clamp

014706386
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C20KH: RNCC: 3 | RNVC: 2

3 Jan 2000

5340-01-708-0351
Angle Bracket Set

017080351
E6-10-212F-50: RNCC: 3 | RNVC: 2

11 Mar 2023

5340-01-706-5483
Retaining Clip

017065483
160-0012: RNCC: 3 | RNVC: 2

5 Dec 2022

5340-01-706-5848
Mounting Bracket

017065848
68A550663-1007: RNCC: 3 | RNVC: 2

7 Dec 2022

5340-01-707-9924
Butt Hinge Leaf

017079924
113N1989-13: RNCC: 3 | RNVC: 2

8 Mar 2023

5340-01-706-5000
Retaining Clip

017065000
8545996-1: RNCC: 3 | RNVC: 2

30 Nov 2022

5340-01-706-3955
Loop Clamp

017063955
403502: RNCC: 3 | RNVC: 2

21 Nov 2022

5340-01-464-9135
Retaining Strap

014649135
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-12N: RNCC: 3 | RNVC: 2

13 May 1999

5340-01-706-0076
Spacing Threaded Standoff

017060076
CB4002V08CR16: RNCC: 3 | RNVC: 2
CB4002 REV 5: RNCC: D | RNVC: 9

24 Oct 2022

5340-01-706-0325
Spring Holder

017060325
603858-0: RNCC: 3 | RNVC: 2

26 Oct 2022

5340-01-707-8770
Mounting Plate

017078770
3338400-109: RNCC: 3 | RNVC: 2

28 Feb 2023

5340-01-705-7077
Dust And Moisture Seal Protective Plug

017057077
M063-00913-000: RNCC: 3 | RNVC: 2

5 Oct 2022

5340-01-705-7613
Cushioning Pad

017057613
8456969-1: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-705-8089
Loop Clamp

017058089
414S2643-7: RNCC: 3 | RNVC: 2

14 Oct 2022

5340-01-705-8458
Cushioning Pad

017058458
8456969-2: RNCC: 3 | RNVC: 2

17 Oct 2022

5340-01-705-9287
Clamping Catch

017059287
4539994-EDFP: RNCC: 3 | RNVC: 2

21 Oct 2022

5340-01-707-8794
Access Door Hinge

017078794
96-50-613-50: RNCC: 3 | RNVC: 2
J-96-50-613: RNCC: D | RNVC: 9

28 Feb 2023

5340-01-707-1256
Snap Hook

017071256
SB3-03-01: RNCC: 3 | RNVC: 2
094664007383: RNCC: 5 | RNVC: 2

18 Jan 2023

5340-01-462-1489
Spacing Threaded Standoff

014621489
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B6E36: RNCC: 3 | RNVC: 2

22 Jan 1999

5340-01-454-4965
Manual Control Lever

014544965
B1460: RNCC: 3 | RNVC: 2
283-1001-26: RNCC: 3 | RNVC: 2
283-1001-3: RNCC: 5 | RNVC: 9

2 Apr 1998

5340-01-705-3950
Spacing Threaded Standoff

017053950
24302: RNCC: 3 | RNVC: 2

19 Sep 2022

5340-01-701-8773
Utility Resilient Mount

017018773
EE120530: RNCC: 3 | RNVC: 2
EE-12053 REV F: RNCC: D | RNVC: 9

14 Jun 2022

5340-01-457-0814
Spacing Threaded Standoff

014570814
NAS1829: RNCC: 3 | RNVC: 1
NAS1829-3C04: RNCC: 3 | RNVC: 2

10 Jul 1998

5340-01-460-8361
Helical Compression Spring Seat

014608361
8682856: RNCC: 3 | RNVC: 2
TSV-C1-98-2000: RNCC: 5 | RNVC: 2
8682856: RNCC: 5 | RNVC: 9
4820PL0758381: RNCC: 6 | RNVC: 9
5340PL0758381: RNCC: 6 | RNVC: 9

18 Nov 1998

5340-01-432-1667
Antipilferage Seal

014321667
F-2738-A01-3-1-12: RNCC: 2 | RNVC: 2
F2738-A01-3-1-12: RNCC: 2 | RNVC: 2
FF-S-2738: RNCC: 4 | RNVC: 1
F-2738-A01-3-1-12: RNCC: 5 | RNVC: 9

29 May 1996

5340-01-433-1877
Rigid Caster

014331877
A-A-55619-6RM: RNCC: 2 | RNVC: 2
AA55619-6RM: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1
M-9706-6: RNCC: 5 | RNVC: 1
M3406-6: RNCC: 5 | RNVC: 1
MS24380-6RM: RNCC: 5 | RNVC: 9
H6981-2: RNCC: 5 | RNVC: 9

24 Jun 1996

5340-01-433-1875
Swivel Caster

014331875
A-A-55619-6SU: RNCC: 2 | RNVC: 2
AA55619-6SU: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1

24 Jun 1996

5340-01-413-8688
Loop Clamp

014138688
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT11Z: RNCC: 3 | RNVC: 2

24 May 1995

5340-01-297-8910
Spring Tension Clip

012978910
7S8921: RNCC: 3 | RNVC: 2
7S-8921: RNCC: 5 | RNVC: 2

7 Apr 1989

5340-01-242-0567
Shop Set Installation Hardware Kit

012420567
025-303: RNCC: 3 | RNVC: 9
025-160: RNCC: 5 | RNVC: 9

6 Oct 1986

5340-01-290-2173
Electrical-Mechanical Equipment Post

012902173
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B4E20: RNCC: 3 | RNVC: 2
8256: RNCC: 5 | RNVC: 9
8256: RNCC: E | RNVC: 8

8 Dec 1988

5340-01-379-6931
Butt Hinge Leaf

013796931
MS20001X12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

7 Sep 1993

5340-01-399-4622
Loop Clamp

013994622
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC12: RNCC: 3 | RNVC: 2
AN735DC12: RNCC: 3 | RNVC: 9
AS7351/AN735DC12: RNCC: 5 | RNVC: 2
AS7351/AN735DC12: RNCC: 5 | RNVC: 9
AN735DC12: RNCC: 5 | RNVC: 9

25 Nov 1994

5340-01-379-6083
Webbing Strap

013796083
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R15AA24: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-01-355-7074
Angle Bracket

013557074
SAE-AS9597: RNCC: 3 | RNVC: 1
MS9597-009: RNCC: 3 | RNVC: 2
MS9597-009: RNCC: 5 | RNVC: 9

21 Mar 1992

5340-01-354-7353
Rod End Locking Retainer

013547353
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K14CP: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-01-355-2169
Butt Hinge Leaf

013552169
MS20001X4-1150: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

12 Mar 1992

5340-01-353-3735
Pad Eye

013533735
4N6045: RNCC: 3 | RNVC: 2
4N-6045: RNCC: 5 | RNVC: 2

10 Feb 1992

5340-01-340-8797
Butt Hinge Leaf

013408797
MS20001PX8-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

20 Jun 1991

5340-01-359-1337
Clamp Bolt Assembly

013591337
M85731/1-2: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
21716-2: RNCC: 5 | RNVC: 1
92185343: RNCC: 5 | RNVC: 2
MIL-F-85731: RNCC: 5 | RNVC: 9
3450-990: RNCC: 5 | RNVC: 9
MS14108-2: RNCC: C | RNVC: 1

29 May 1992

5340-01-588-9064
Dust And Moisture Seal Protective Cap-Plug

015889064
101C-SMT: RNCC: 3 | RNVC: 9

7 Oct 2010

5340-01-337-9732
Angle Bracket

013379732
SAE-AS9592: RNCC: 3 | RNVC: 2
MS9592-058: RNCC: 5 | RNVC: 9
MS9592-058: RNCC: 5 | RNVC: 9

24 Apr 1991

5340-01-344-9564
Spacing Threaded Standoff

013449564
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B05: RNCC: 3 | RNVC: 2
C5001151: RNCC: 3 | RNVC: 2
10122219: RNCC: 6 | RNVC: 9

8 Sep 1991

5340-01-336-9597
Bow Handle

013369597
NASM39087: RNCC: 3 | RNVC: 1
MS39087-406AN: RNCC: 3 | RNVC: 2
600073P14: RNCC: 5 | RNVC: 1
610715-14: RNCC: 5 | RNVC: 1
MS39087-406AN: RNCC: 5 | RNVC: 9

5 Apr 1991

5340-01-337-4717
Electrical-Mechanical Equipment Post

013374717
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B4C08: RNCC: 3 | RNVC: 2
8218: RNCC: C | RNVC: 1
8218: RNCC: E | RNVC: 8
8218: RNCC: E | RNVC: 8

16 Apr 1991

5340-01-346-2887
Electrical-Mechanical Equipment Post

013462887
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3A03: RNCC: 3 | RNVC: 2

2 Oct 1991

5340-01-352-4248
Retaining Strap

013524248
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C24W40N: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-01-322-4929
Dust And Moisture Seal Protective Plug

013224929
NAS820: RNCC: 3 | RNVC: 1
NAS820-32A: RNCC: 3 | RNVC: 2
NAS 820-32A: RNCC: 5 | RNVC: 2
114501KB: RNCC: 5 | RNVC: 2
NAS 820-32A: RNCC: 5 | RNVC: 9

8 Jul 1990

5340-01-323-1051
Electrical-Mechanical Equipment Post

013231051
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A4E06: RNCC: 3 | RNVC: 2
9738-A-0632-10: RNCC: C | RNVC: 1

21 Jul 1990

5340-01-328-1315
Mending Plate

013281315
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-116: RNCC: 3 | RNVC: 2
MS9552-116: RNCC: 5 | RNVC: 9

27 Oct 1990

5340-01-330-0536
Angle Bracket

013300536
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-014: RNCC: 3 | RNVC: 2
MS9600-014: RNCC: 5 | RNVC: 9

29 Nov 1990

5340-01-332-3809
Spring Tension Clip

013323809
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B018-06N: RNCC: 3 | RNVC: 2
10113162: RNCC: 6 | RNVC: 9

10 Jan 1991

5340-01-323-4210
Angle Bracket

013234210
SAE-AS9602: RNCC: 3 | RNVC: 1
MS9602-134: RNCC: 3 | RNVC: 2
MS9602-134: RNCC: 5 | RNVC: 9

27 Jul 1990

5340-01-323-4557
Retaining Strap

013234557
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-40N: RNCC: 3 | RNVC: 2

27 Jul 1990

5340-01-330-0779
Webbing Strap

013300779
NAS1212: RNCC: 3 | RNVC: 1
NAS1212P17AA80: RNCC: 3 | RNVC: 2

29 Nov 1990

5340-01-469-7702
Spacing Threaded Standoff

014697702
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4B32: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-01-475-4144
Butt Hinge

014754144
MS20001P4-4010: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

2 Jun 2000

5340-01-706-2088
Headless Straight Rod

017062088
370129-18: RNCC: 3 | RNVC: 2
370129: RNCC: D | RNVC: 9

8 Nov 2022

5340-01-504-2512
Dust And Moisture Seal Protective Cap

015042512
NAS832: RNCC: 3 | RNVC: 1
NAS832-20: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-01-703-3132
Mounting Bracket

017033132
71R172-01: RNCC: 3 | RNVC: 2

29 Aug 2022

5340-01-318-9710
Loop Clamp

013189710
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-23N: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-01-331-6057
Electrical-Mechanical Equipment Post

013316057
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D44: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-01-708-7908
Access Cover

017087908
4225AS0304-101: RNCC: 3 | RNVC: 2
4225AS0304-101: RNCC: 3 | RNVC: 2
4225AS0304: RNCC: D | RNVC: 9

24 Apr 2023

5340-01-708-8005
Mounting Bracket

017088005
11080-0511: RNCC: 3 | RNVC: 2
11080-0511-02: RNCC: 5 | RNVC: 2

24 Apr 2023

5340-01-710-4656
Mounting Plate

017104656
JUK1272: RNCC: 3 | RNVC: 1

31 May 2023

5340-01-710-5841
Grommet Assembly

017105841
901075899139: RNCC: 3 | RNVC: 2

8 Jun 2023

5340-01-307-5940
Loop Clamp

013075940
MS9025-01: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

14 Sep 1989

5340-01-307-7728
Electrical-Mechanical Equipment Post

013077728
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D28: RNCC: 3 | RNVC: 2
NAS1831-6D28: RNCC: C | RNVC: 1

16 Sep 1989

5340-01-311-9438
Expansion Plug

013119438
SAE-AS3127: RNCC: 3 | RNVC: 1
AS3127-10: RNCC: 3 | RNVC: 2
AS3127-10: RNCC: 3 | RNVC: 9
PLGA4685020: RNCC: 5 | RNVC: 9
AS3127-10: RNCC: 5 | RNVC: 9

6 Dec 1989

5340-01-191-2774
Spring Tension Clip

011912774
NASM24066/2: RNCC: 3 | RNVC: 1
M24066//2-219: RNCC: 3 | RNVC: 2
M24066/2-219: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 1
M24066/2-219: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9

7 Oct 1984

5340-01-702-4890
Mounting Bracket

017024890
ST-MERK-01-03: RNCC: 3 | RNVC: 2
ST-MERK-01-03: RNCC: 5 | RNVC: 2
ST-MERK-01-03: RNCC: 5 | RNVC: 9

11 Jul 2022

5340-01-194-8569
Spring Tension Clip

011948569
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-247: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-247: RNCC: 5 | RNVC: 9
M24066/2-047: RNCC: 5 | RNVC: 9

19 Nov 1984

5340-01-293-1105
Loop Clamp

012931105
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-6N: RNCC: 3 | RNVC: 2

26 Jan 1989

5340-01-286-3543
Loop Clamp

012863543
SAE-AS9353: RNCC: 3 | RNVC: 1
MS9353-15: RNCC: 3 | RNVC: 2
MS9353-15: RNCC: 5 | RNVC: 9

30 Sep 1988

5340-01-304-3573
Manual Control Lever

013043573
94507-991: RNCC: 3 | RNVC: 2
94507-991: RNCC: 3 | RNVC: 9
4539120-008: RNCC: 5 | RNVC: 2
HE011638: RNCC: 5 | RNVC: 2
011638: RNCC: 5 | RNVC: 2
4539120-008: RNCC: 5 | RNVC: 9

17 Jul 1989

5340-01-296-8807
Loop Clamp

012968807
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P2B: RNCC: 3 | RNVC: 2
5340PL0855919: RNCC: 6 | RNVC: 9

24 Mar 1989

5340-01-284-9888
Spring Tension Clip

012849888
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-12C: RNCC: 3 | RNVC: 2

3 Sep 1988

5340-01-301-5238
Loop Clamp

013015238
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R3DB: RNCC: 3 | RNVC: 2
076-007549-001: RNCC: 5 | RNVC: 9
2888: RNCC: 5 | RNVC: 9

29 May 1989

5340-01-565-7124
Dust And Moisture Seal Protective Plug

015657124
RW372-1: RNCC: 3 | RNVC: 2

4 Aug 2008

5340-01-306-1546
Spacing Threaded Standoff

013061546
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5D08: RNCC: 3 | RNVC: 2
NAS1786-08-8: RNCC: C | RNVC: 1

18 Aug 1989

5340-01-306-3650
Webbing Strap

013063650
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10J66: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-01-281-4501
Butt Hinge

012814501
MS20001P14-388: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

23 Jun 1988

5340-01-272-8387
Loop Clamp

012728387
AA52406-16: RNCC: 2 | RNVC: 2
A-A-52406-165A: RNCC: 2 | RNVC: 2
A-A-52406: RNCC: 4 | RNVC: 1
MS52150-16SA: RNCC: 5 | RNVC: 9
AA52406-165A: RNCC: 5 | RNVC: 9

15 Feb 1988

5340-01-277-4541
Bow Handle

012774541
NASM39087: RNCC: 3 | RNVC: 1
MS39087-404CB: RNCC: 3 | RNVC: 2
MS39087-404CB: RNCC: 5 | RNVC: 9
MS39087-202CB: RNCC: 5 | RNVC: 9

22 Apr 1988

5340-01-279-4783
Spacing Threaded Standoff

012794783
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E08: RNCC: 3 | RNVC: 2
8573SS1032: RNCC: 5 | RNVC: 2
8573SS1032-7: RNCC: 5 | RNVC: 2
8573SS1032: RNCC: 5 | RNVC: 9
8573SS1032-7: RNCC: 5 | RNVC: 9
948515-5608: RNCC: C | RNVC: 1

20 May 1988

5340-01-283-4613
Electrical-Mechanical Equipment Post

012834613
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B11: RNCC: 3 | RNVC: 2

6 Aug 1988

5340-01-625-2763
Manual Control Lever

016252763
11582684: RNCC: 3 | RNVC: 2
E1211158: RNCC: 5 | RNVC: 2
777.21.014: RNCC: 5 | RNVC: 2

30 Jan 2014

5340-01-167-9313
Dust And Moisture Seal Protective Plug

011679313
NAS840: RNCC: 3 | RNVC: 1
NAS840-12A: RNCC: 3 | RNVC: 2

8 Dec 1983

5340-01-250-8237
Clamp Bolt Assembly

012508237
M85731/1-10: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
2132564-2: RNCC: 5 | RNVC: 1
5000021: RNCC: 5 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
22132564-2: RNCC: 5 | RNVC: 9
MS14108-10: RNCC: 5 | RNVC: 9
10113023: RNCC: 6 | RNVC: 9

7 Mar 1987

5340-01-259-6507
Electrical-Mechanical Equipment Post

012596507
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-6D24: RNCC: 3 | RNVC: 2

19 Jul 1987

5340-01-266-2667
Butt Hinge

012662667
AA55592-16C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-16C: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-01-271-7675
Electrical-Mechanical Equipment Post

012717675
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E08: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-01-264-3726
Webbing Strap

012643726
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10BJ44: RNCC: 3 | RNVC: 2

29 Sep 1987

5340-01-254-7341
Angle Bracket

012547341
SAE-AS9603: RNCC: 3 | RNVC: 1
MS9603-102: RNCC: 3 | RNVC: 2
MS9603-102: RNCC: 5 | RNVC: 9

9 May 1987

5340-01-251-6434
Loop Clamp

012516434
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-6N: RNCC: 3 | RNVC: 2
10113027: RNCC: 6 | RNVC: 9
NAS1712D12-6S: RNCC: C | RNVC: 1

21 Mar 1987

5340-01-272-4958
Dust And Moisture Seal Protective Cap-Plug

012724958
NAS820: RNCC: 3 | RNVC: 1
NAS820-14-14S: RNCC: 3 | RNVC: 2
NAS-820-14-14S: RNCC: 5 | RNVC: 2

10 Feb 1988

5340-01-253-5863
Electrical-Mechanical Equipment Post

012535863
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B09: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-01-525-5556
Detent Plunger

015255556
11581530: RNCC: 3 | RNVC: 2
E1211155: RNCC: 5 | RNVC: 2
777.21.042: RNCC: 5 | RNVC: 2

16 Nov 2004

5340-01-525-6294
Manual Control Lever

015256294
11581540: RNCC: 3 | RNVC: 2
E1211143: RNCC: 5 | RNVC: 2
777.21.049: RNCC: 5 | RNVC: 2

18 Nov 2004

5340-01-250-8233
Spring Tension Clip

012508233
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B056-10T: RNCC: 3 | RNVC: 2

7 Mar 1987

5340-01-263-8258
Spacing Threaded Standoff

012638258
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-6E08: RNCC: 3 | RNVC: 2

20 Sep 1987

5340-01-710-6296
Mounting Plate

017106296
952228: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-298-6025
Spring Tension Clip

012986025
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-010-02C: RNCC: 3 | RNVC: 2
418751-15: RNCC: 5 | RNVC: 2

19 Apr 1989

5340-01-231-8550
Electrical-Mechanical Equipment Post

012318550
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B32: RNCC: 3 | RNVC: 2

6 May 1986

5340-01-235-4461
Self-Locking Insert

012354461
111113-2042: RNCC: 3 | RNVC: 1
111113-2042CP: RNCC: 5 | RNVC: 2
283471-0001 ITECP: RNCC: 5 | RNVC: 2
283471-0001 ITE: RNCC: C | RNVC: 1

30 Jun 1986

5340-01-710-2946
Threaded Standoff Assembly

017102946
470Y103-1: RNCC: 3 | RNVC: 2

22 May 2023

5340-01-710-3015
Threaded Standoff Assembly

017103015
470Y099-1: RNCC: 3 | RNVC: 2

23 May 2023

5340-01-709-2040
Loop Clamp

017092040
9NG0012D2NB: RNCC: 3 | RNVC: 2
TA0220055DC2NB: RNCC: 5 | RNVC: 2
40005D2Y: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

17 May 2023

5340-01-710-6135
Threaded Standoff Assembly

017106135
470Y185-1: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-710-6337
Cushioning Pad

017106337
12242-2056-01: RNCC: 3 | RNVC: 2
12242-2056: RNCC: D | RNVC: 9

12 Jun 2023

5340-01-709-1687
Access Cover

017091687
7-4858-1: RNCC: 3 | RNVC: 2
7-4858: RNCC: D | RNVC: 9

15 May 2023

5340-01-709-1488
Mounting Bracket

017091488
12644538-001: RNCC: 3 | RNVC: 2
12644538-001: RNCC: 5 | RNVC: 2

13 May 2023

5340-01-709-2119
Roller Holder

017092119
21569-1001-1: RNCC: 3 | RNVC: 2
21569-401 FIND NUMBER 7: RNCC: C | RNVC: 1
21569-401: RNCC: D | RNVC: 9

17 May 2023

5340-01-709-2354
Angle Bracket

017092354
12641816: RNCC: 3 | RNVC: 2
12641816: RNCC: 5 | RNVC: 2

18 May 2023

5340-01-709-7544
Mounting Bracket

017097544
12644540: RNCC: 3 | RNVC: 2
12644540: RNCC: C | RNVC: 1

19 May 2023

5340-01-710-3038
Threaded Standoff Assembly

017103038
470Y098-2: RNCC: 3 | RNVC: 2

23 May 2023

5340-01-710-2673
Handwheel

017102673
845-8616936-ITEM NO-105: RNCC: 3 | RNVC: 2
2644-343-01-ITEM NO-105: RNCC: 5 | RNVC: 2
845-8616936: RNCC: D | RNVC: 9

20 May 2023

5340-01-710-3450
Air Cone

017103450
HAN 664-1: RNCC: 3 | RNVC: 2
A-324-21 ITEM 25: RNCC: 5 | RNVC: 2
A-324-21: RNCC: D | RNVC: 9

26 May 2023

5340-01-710-6042
Angle Bracket

017106042
12641846: RNCC: 3 | RNVC: 2
12641846: RNCC: 5 | RNVC: 1

9 Jun 2023

5340-01-710-6314
Mounting Bracket

017106314
8794959-11: RNCC: 3 | RNVC: 2
8794959: RNCC: D | RNVC: 9

12 Jun 2023

5340-01-227-7448
Angle Bracket

012277448
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-218: RNCC: 3 | RNVC: 2
MS9592-218: RNCC: 5 | RNVC: 9

7 Mar 1986

5340-01-232-3502
Electrical-Mechanical Equipment Post

012323502
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B24: RNCC: 3 | RNVC: 2
NAS1786C04-24: RNCC: C | RNVC: 1
8169-SS-0440: RNCC: C | RNVC: 1

12 May 1986

5340-01-236-2201
Electrical-Mechanical Equipment Post

012362201
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C32: RNCC: 3 | RNVC: 2
2214: RNCC: C | RNVC: 1
540-9472-003: RNCC: E | RNVC: 8

15 Jul 1986

5340-01-234-1489
Spring Tension Clip

012341489
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-086-06C: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-01-228-3391
Electrical-Mechanical Equipment Post

012283391
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B28: RNCC: 3 | RNVC: 2
2680133-302: RNCC: 5 | RNVC: 2
8231-SS0440: RNCC: 5 | RNVC: 9
8231-SS0440: RNCC: C | RNVC: 1

17 Mar 1986

5340-01-531-3270
Quick Release Plunger

015313270
11581695: RNCC: 3 | RNVC: 2
E1211910SB: RNCC: 5 | RNVC: 2
SV.111.001.000: RNCC: 5 | RNVC: 2

2 Jul 2005

5340-01-226-4606
Electrical-Mechanical Equipment Post

012264606
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B5C18: RNCC: 3 | RNVC: 2
NAS1786B06-18: RNCC: E | RNVC: 8

19 Feb 1986

5340-01-223-3135
Electrical-Mechanical Equipment Post

012233135
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D24: RNCC: 3 | RNVC: 2
948515-5124: RNCC: C | RNVC: 1
810AS407: RNCC: C | RNVC: 1

27 Dec 1985

5340-01-223-5098
Electrical-Mechanical Equipment Post

012235098
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-3B07: RNCC: 3 | RNVC: 2
8105SS0440-7: RNCC: 5 | RNVC: 9
3594-6078: RNCC: 5 | RNVC: 9
10163933: RNCC: 6 | RNVC: 9
019215-4: RNCC: 7 | RNVC: 9
4300000-3: RNCC: 7 | RNVC: 9
4300000-3: RNCC: C | RNVC: 1
8105SS0440-7: RNCC: C | RNVC: 1

30 Dec 1985

5340-01-165-4754
Pad Eye

011654754
3536712-801: RNCC: 3 | RNVC: 2
91789-991: RNCC: 3 | RNVC: 9
3536712-801: RNCC: 5 | RNVC: 2
011426: RNCC: 5 | RNVC: 2
HE011426: RNCC: 5 | RNVC: 2
3536712-801: RNCC: 5 | RNVC: 9
4536519-801: RNCC: 5 | RNVC: 9
472-9426: RNCC: 6 | RNVC: 9

29 Oct 1983

5340-01-201-4532
Electrical-Mechanical Equipment Post

012014532
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D44: RNCC: 3 | RNVC: 2

18 Feb 1985

5340-01-211-6143
Loop Clamp

012116143
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D2N: RNCC: 3 | RNVC: 2
MS9351-01: RNCC: 5 | RNVC: 9

28 Jun 1985

5340-01-183-0978
Dust And Moisture Seal Protective Cap-Plug

011830978
NAS835: RNCC: 3 | RNVC: 1
NAS835-86: RNCC: 3 | RNVC: 2
WW12: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F20: RNCC: 5 | RNVC: 9
NAS847: RNCC: 5 | RNVC: 9
WW12: RNCC: C | RNVC: 1

2 Jul 1984

5340-01-208-5476
Loop Clamp

012085476
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-26N: RNCC: 3 | RNVC: 2

15 May 1985

5340-01-224-7388
Spring Tension Clip

012247388
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-106: RNCC: 3 | RNVC: 2
MIL-C-24066/4: RNCC: 5 | RNVC: 9
M24066/4-106: RNCC: 5 | RNVC: 9
MS28137-6: RNCC: E | RNVC: 8

23 Jan 1986

5340-01-199-9835
Swivel Caster

011999835
8028910-01: RNCC: 3 | RNVC: 2
12-MN08227-S-002: RNCC: 5 | RNVC: 2
4-8499-655-9-51: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-01-167-3502
Bow Handle

011673502
NASM39087: RNCC: 3 | RNVC: 1
MS39087-410CP: RNCC: 3 | RNVC: 2
MS39087-410CP: RNCC: 5 | RNVC: 9
MS39087-204CP: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-01-165-4466
Butt Hinge

011654466
AA55594-16C: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-16C: RNCC: 5 | RNVC: 9

28 Oct 1983

5340-01-189-9984
Butt Hinge

011899984
AA55590-9C: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-9C: RNCC: 5 | RNVC: 9

21 Sep 1984

5340-01-206-1332
Electrical-Mechanical Equipment Post

012061332
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C07: RNCC: 3 | RNVC: 2
14H3-04X7C: RNCC: C | RNVC: 1
532348-404: RNCC: C | RNVC: 1
9727550440-7: RNCC: C | RNVC: 1
9727SS0440-7: RNCC: C | RNVC: 1
9727550440-7: RNCC: C | RNVC: 1

15 Apr 1985

5340-00-949-9132
Loop Clamp

009499132
NASM21333: RNCC: 3 | RNVC: 2
MS21333-83: RNCC: 5 | RNVC: 9
MS21333-83: RNCC: 5 | RNVC: 9

22 Apr 1966

5340-01-168-7764
Loop Clamp

011687764
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C24-14S: RNCC: 3 | RNVC: 2
10112852: RNCC: 6 | RNVC: 9

23 Dec 1983

5340-01-161-9179
Retaining Strap

011619179
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10W32N: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-01-164-0527
Spring Tension Clip

011640527
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-329: RNCC: 3 | RNVC: 2
B82285: RNCC: 5 | RNVC: 2
M24066/2-329: RNCC: 5 | RNVC: 9
M24066/2-129: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
416949-29: RNCC: C | RNVC: 1

12 Oct 1983

5340-01-175-2570
Dust And Moisture Seal Boot

011752570
0005454845: RNCC: 3 | RNVC: 2
BML61114: RNCC: 3 | RNVC: 2
317-1398-000: RNCC: 3 | RNVC: 2
10500864: RNCC: 5 | RNVC: 1
7077611: RNCC: 5 | RNVC: 2
7110660: RNCC: 5 | RNVC: 2
0005454845: RNCC: 5 | RNVC: 2
Y00020750: RNCC: 5 | RNVC: 2
50009113-1: RNCC: 5 | RNVC: 2
0005454845: RNCC: 5 | RNVC: 2

29 Mar 1984

5340-01-168-1945
Loop Clamp

011681945
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C21KH: RNCC: 3 | RNVC: 2
MS9350-20: RNCC: 5 | RNVC: 9

14 Dec 1983

5340-01-190-7638
Mending Plate

011907638
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-022: RNCC: 3 | RNVC: 2
MS9552-022: RNCC: 5 | RNVC: 9

30 Sep 1984

5340-01-163-9401
Loop Clamp

011639401
NASM21322: RNCC: 3 | RNVC: 1
MS21322-56: RNCC: 3 | RNVC: 2
MS21322-56: RNCC: 5 | RNVC: 9

10 Oct 1983

5340-01-272-4966
Spring Tension Clip

012724966
3G8054: RNCC: 3 | RNVC: 2
3G-8054: RNCC: 5 | RNVC: 2

10 Feb 1988

5340-01-174-4645
Butt Hinge Leaf

011744645
MS20001CH6-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

19 Mar 1984

5340-01-130-0151
Spring Tension Clip

011300151
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B050-12N: RNCC: 3 | RNVC: 2
10086801: RNCC: 6 | RNVC: 9

15 Apr 1982

5340-01-130-9434
Retaining Strap

011309434
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D15W30N: RNCC: 3 | RNVC: 2
10112576: RNCC: 6 | RNVC: 9

30 Apr 1982

5340-01-135-8296
Loop Clamp

011358296
MS21122C11: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MIL-C-8956: RNCC: 5 | RNVC: 9
5340PL0847674: RNCC: 6 | RNVC: 9

30 Jul 1982

5340-00-051-2672
Loop Clamp

000512672
MS9025-17: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
M9025-17: RNCC: C | RNVC: 1

1 Jan 1961

5340-01-123-8665
Loop Clamp

011238665
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-5SW: RNCC: 3 | RNVC: 2

18 Dec 1981

5340-01-134-6261
Loop Clamp

011346261
NASM21333: RNCC: 3 | RNVC: 1
MS21333-85: RNCC: 3 | RNVC: 2
MS21333-85: RNCC: 5 | RNVC: 9

7 Jul 1982

5340-01-117-3799
Loop Clamp

011173799
M85052/1-4: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
JM44LC70PH4YN: RNCC: 5 | RNVC: 1
JM44LC70WPH4YN: RNCC: 5 | RNVC: 1
TA026000104NB: RNCC: 5 | RNVC: 1
1444PHW4Y: RNCC: 5 | RNVC: 1
TA025228-4NB: RNCC: 5 | RNVC: 1
S664NB4: RNCC: 5 | RNVC: 1
9M972-4N: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9

13 Aug 1981

5340-01-124-0627
Loop Clamp

011240627
MS21122C2: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

27 Dec 1981

5340-01-128-4259
Butt Hinge Leaf

011284259
MS20001H12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

20 Mar 1982

5340-01-153-9427
Loop Clamp

011539427
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-22T: RNCC: 3 | RNVC: 2
10112787: RNCC: 6 | RNVC: 9

18 May 1983

5340-00-050-3015
Butt Hinge

000503015
AA55586-10: RNCC: 2 | RNVC: 2
A-A-55586: RNCC: 4 | RNVC: 1
MS27966-10: RNCC: 5 | RNVC: 9
AA55586-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-050-3014
Butt Hinge

000503014
AA55586-8: RNCC: 2 | RNVC: 2
A-A-55586: RNCC: 4 | RNVC: 1
MS27966-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-131-5577
Loop Clamp

011315577
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-12N: RNCC: 3 | RNVC: 2
10112588: RNCC: 6 | RNVC: 9
NAS1712D12-12S: RNCC: C | RNVC: 1

12 May 1982

5340-01-126-9182
Loop Clamp

011269182
M85052/3-10: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000110HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112505: RNCC: 6 | RNVC: 9

19 Feb 1982

5340-01-131-3131
Loop Clamp

011313131
M85052/1-15: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
S664NB15: RNCC: 5 | RNVC: 1
JM44LC70WPH15YN: RNCC: 5 | RNVC: 1
1444PHW15Y: RNCC: 5 | RNVC: 1
TA026000115NB: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10112579: RNCC: 6 | RNVC: 9
9M972-15N: RNCC: C | RNVC: 1

7 May 1982

5340-01-706-8422
Grooved Clamp Coupling

017068422
5131A-315-A: RNCC: 3 | RNVC: 2

22 Dec 2022

5340-01-706-2033
Mounting Bracket

017062033
5634010: RNCC: 3 | RNVC: 2

8 Nov 2022

5340-01-705-4694
Mounting Bracket

017054694
13706459-1: RNCC: 3 | RNVC: 2
13706459: RNCC: D | RNVC: 9

21 Sep 2022

5340-01-705-5012
Dust And Moisture Seal Protective Cap

017055012
AP001141: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-705-5017
Rod End Connector

017055017
EF201: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-706-2765
Access Cover

017062765
12638672-T: RNCC: 3 | RNVC: 2
12638672: RNCC: D | RNVC: 9

14 Nov 2022

5340-01-706-8831
Retaining Clamp Assembly

017068831
830WPH19B: RNCC: 3 | RNVC: 2
S79WPLHT19: RNCC: 5 | RNVC: 2

28 Dec 2022

5340-01-706-9033
Spacing Threaded Standoff

017069033
CB4000C3CR14: RNCC: 3 | RNVC: 2

30 Dec 2022

5340-01-706-9823
Loop Clamp

017069823
AS21919WCG42: RNCC: 3 | RNVC: 2

6 Jan 2023

5340-01-706-8481
Mounting Bracket

017068481
432W7201-15B: RNCC: 3 | RNVC: 1

22 Dec 2022

5340-01-706-9003
Filler Opening Cap

017069003
SS9609GZ3220: RNCC: 3 | RNVC: 2

30 Dec 2022

5340-01-706-1502
Dust And Moisture Seal Protective Cover

017061502
12638877: RNCC: 3 | RNVC: 2

3 Nov 2022

5340-01-706-9519
Cushioning Pad

017069519
2193-1801-01: RNCC: 3 | RNVC: 2
12193-1801-01: RNCC: 3 | RNVC: 2
2193-1801: RNCC: D | RNVC: 9
1293-1801: RNCC: D | RNVC: 9

5 Jan 2023

5340-01-707-9139
Door Frame

017079139
11B5091860: RNCC: 3 | RNVC: 2

3 Mar 2023

5340-01-708-0864
Rod End Clevis

017080864
3177485-1: RNCC: 3 | RNVC: 2

15 Mar 2023

5340-01-707-8026
Butt Hinge Leaf

017078026
78207-03002-125: RNCC: 3 | RNVC: 2
78207-03002: RNCC: D | RNVC: 9

23 Feb 2023

5340-01-706-0342
Mounting Bracket

017060342
70150-09228-044: RNCC: 3 | RNVC: 2
70150-09228: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-669-2016
Loop Clamp

016692016
MS21122CW4: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

27 Dec 2017

5340-01-706-0381
Mounting Bracket

017060381
A1700-00-W: RNCC: 3 | RNVC: 2
5613-638-001 REVI SH9 ITEM 20A: RNCC: 5 | RNVC: 1
121-346-TB ITEM 20: RNCC: 5 | RNVC: 1
5613-638-001 REVI: RNCC: D | RNVC: 9
121-346-TB: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-706-1092
Manual Control Lever

017061092
725-8838197-A3: RNCC: 3 | RNVC: 2
LOA007265-A3: RNCC: 5 | RNVC: 2

1 Nov 2022

5340-01-706-1139
Mounting Plate

017061139
5-13-11284-1: RNCC: 3 | RNVC: 2

1 Nov 2022

5340-01-703-2005
Angle Bracket

017032005
12591945: RNCC: 3 | RNVC: 2

23 Aug 2022

5340-01-706-9925
Retaining Strap

017069925
4W19088-107A: RNCC: 3 | RNVC: 2
4W19088: RNCC: D | RNVC: 9

9 Jan 2023

5340-01-707-0000
Webbing Strap

017070000
SRPV2200388-111: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-707-0395
Mounting Bracket

017070395
326P1S5399-201: RNCC: 3 | RNVC: 2

11 Jan 2023

5340-01-707-7210
Dust And Moisture Seal Protective Cover

017077210
2832: RNCC: 3 | RNVC: 2

17 Feb 2023

5340-01-706-1914
Mounting Bracket

017061914
402424: RNCC: 3 | RNVC: 2

7 Nov 2022

5340-01-707-8204
Rod End Clevis

017078204
563-6985326-6: RNCC: 3 | RNVC: 2
H552-0620-6: RNCC: 5 | RNVC: 9
6985326: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-708-0931
Utility Access Door

017080931
5-13-10518-3: RNCC: 3 | RNVC: 2
5-13-10518: RNCC: D | RNVC: 9

15 Mar 2023

5340-01-707-8507
Mounting Bracket

017078507
438-0013 ICD: RNCC: 1 | RNVC: 2
438-0013: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-707-9043
Webbing Strap

017079043
12675322: RNCC: 3 | RNVC: 2

2 Mar 2023

5340-01-707-9314
Slide Keeper

017079314
USC-SK2: RNCC: 3 | RNVC: 2

6 Mar 2023

5340-01-109-7061
Dust And Moisture Seal Protective Cap-Plug

011097061
NAS834: RNCC: 3 | RNVC: 1
NAS834-23: RNCC: 3 | RNVC: 2
AIA/NAS NAS834: RNCC: 5 | RNVC: 1
M5501/7-F3: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
10117645: RNCC: 6 | RNVC: 9

19 Mar 1981

5340-01-113-0773
Rod End Locking Retainer

011130773
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K6CP: RNCC: 3 | RNVC: 2
NAS1193K6CP: RNCC: 5 | RNVC: 1
10387688: RNCC: 6 | RNVC: 9

15 May 1981

5340-01-113-0900
Loop Clamp

011130900
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-14: RNCC: 3 | RNVC: 2
MS9349-14: RNCC: 3 | RNVC: 9
PWA53804-22: RNCC: 5 | RNVC: 2
MS9349-14: RNCC: 5 | RNVC: 9

15 May 1981

5340-01-126-3012
Loop Clamp

011263012
C450-300-1: RNCC: 3 | RNVC: 2
11731-48-1: RNCC: 5 | RNVC: 2
2677-300-1: RNCC: 5 | RNVC: 2
MBS69925-300-1: RNCC: 5 | RNVC: 2
979-48-1: RNCC: 5 | RNVC: 9
MB569925-300-1: RNCC: 5 | RNVC: 9
5340PL0726143: RNCC: 6 | RNVC: 9
5340PL1693532: RNCC: 6 | RNVC: 9
5340PL1909375: RNCC: 6 | RNVC: 9

9 Feb 1982

5340-01-147-4296
Butt Hinge

011474296
MS20001-12-1200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
1281648-101: RNCC: 5 | RNVC: 9
MS20001-12: RNCC: 5 | RNVC: 9

16 Feb 1983

5340-01-081-9173
Loop Clamp

010819173
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D6TW: RNCC: 3 | RNVC: 2

22 Aug 1979

5340-01-096-0281
Turnbuckle Body

010960281
NASM27954: RNCC: 3 | RNVC: 1
MS27954-18: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9
MS27954-18: RNCC: 5 | RNVC: 9

11 Jun 1980

5340-01-707-4124
Access Cover

017074124
2932034-104: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-707-4126
Access Cover

017074126
2933198-102: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-707-4136
Compression Cup

017074136
845-6351932-X-7(SPC): RNCC: 3 | RNVC: 1
2643-998-01-X-7(SPC): RNCC: 5 | RNVC: 1

1 Feb 2023

5340-01-708-9659
Retaining Clamp Assembly

017089659
4070887C1: RNCC: 3 | RNVC: 2

3 May 2023

5340-01-705-8078
Double Angle Bracket

017058078
11B5091987: RNCC: 3 | RNVC: 2

14 Oct 2022

5340-01-706-5228
Retaining Strap

017065228
NAS1677C24W32N: RNCC: 3 | RNVC: 2

2 Dec 2022

5340-01-707-3994
Manual Control Lever

017073994
845-8616942-ITEM NO-28: RNCC: 3 | RNVC: 2
2644-4501-ITEM NO-28: RNCC: 5 | RNVC: 2
8616942: RNCC: D | RNVC: 9

31 Jan 2023

5340-01-706-7470
Mounting Bracket

017067470
4347523: RNCC: 3 | RNVC: 2

15 Dec 2022

5340-01-707-6761
Mounting Bracket

017076761
104291: RNCC: 3 | RNVC: 2
104291: RNCC: 5 | RNVC: 9

15 Feb 2023

5340-01-706-7679
Latch Bar

017067679
12638851: RNCC: 3 | RNVC: 2

16 Dec 2022

5340-01-706-5237
Retaining Strap

017065237
NAS1677D16W24N: RNCC: 3 | RNVC: 2

2 Dec 2022

5340-01-706-6187
Dashpot

017066187
721-8618575-PN-17: RNCC: 3 | RNVC: 2
8618575: RNCC: D | RNVC: 9

8 Dec 2022

5340-01-706-6838
Retaining Strap

017066838
7082539: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-707-6185
Block Clamp

017076185
4347524: RNCC: 3 | RNVC: 2

13 Feb 2023

5340-01-699-7647
Mounting Bracket

016997647
334/G1441: RNCC: 3 | RNVC: 2

24 Feb 2022

5340-01-705-9352
Cushioning Pad

017059352
FP-CAMO-BALL-2155: RNCC: 3 | RNVC: 2

22 Oct 2022

5340-01-707-5044
Mounting Bracket

017075044
101669-0001: RNCC: 3 | RNVC: 2

6 Feb 2023

5340-01-709-0593
Detent Plunger

017090593
PTL2-04-4CN: RNCC: 3 | RNVC: 2
200916738-01: RNCC: 7 | RNVC: 2
200916738: RNCC: D | RNVC: 9

9 May 2023

5340-01-706-7046
Mounting Bracket

017067046
13540767: RNCC: 3 | RNVC: 2

14 Dec 2022

5340-01-706-7054
Rigid Connecting Link

017067054
59315-1: RNCC: 3 | RNVC: 2
59315: RNCC: 3 | RNVC: 2

14 Dec 2022

5340-01-706-7056
Dust And Moisture Seal Protective Cap

017067056
12502067: RNCC: 3 | RNVC: 2

14 Dec 2022

5340-01-705-7956
Mounting Plate

017057956
22D2793-2: RNCC: 3 | RNVC: 2

13 Oct 2022

5340-01-705-7967
Door Holder

017057967
13064424: RNCC: 1 | RNVC: 2
1-666-2-MB: RNCC: 3 | RNVC: 2

13 Oct 2022

5340-01-705-8556
Mounting Bracket

017058556
A3417327-0: RNCC: 3 | RNVC: 2
A3417327: RNCC: D | RNVC: 9

18 Oct 2022

5340-01-705-8751
Rigid Connecting Link

017058751
4F53302-101B: RNCC: 3 | RNVC: 2
4F53302: RNCC: D | RNVC: 9

19 Oct 2022

5340-01-705-8838
Loop Clamp

017058838
NAS1715CT8SWH: RNCC: 3 | RNVC: 2

19 Oct 2022

5340-01-707-5499
Block Clamp

017075499
4347525: RNCC: 3 | RNVC: 2

8 Feb 2023

5340-01-707-5555
Cushioning Pad

017075555
12193-6292-01: RNCC: 3 | RNVC: 2

8 Feb 2023

5340-01-668-1645
Retaining Strap

016681645
SAE-AS6495: RNCC: 3 | RNVC: 1
AS6495-20: RNCC: 3 | RNVC: 2
AS6495-20: RNCC: 5 | RNVC: 9

9 Nov 2017

5340-01-706-0246
Mounting Bracket

017060246
70150-09228-041: RNCC: 3 | RNVC: 2
70150-09228: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-214-1004
Electrical-Mechanical Equipment Post

012141004
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4C10: RNCC: 3 | RNVC: 2
B1575-5-8-11-2: RNCC: 5 | RNVC: 2
A40632-1: RNCC: 5 | RNVC: 9
3935-8: RNCC: 5 | RNVC: 9

6 Aug 1985

5340-01-082-3002
Expansion Plug

010823002
ST7M141D15S: RNCC: 1 | RNVC: 2
PLGA4680010: RNCC: 3 | RNVC: 2
PLGA4680010A: RNCC: 3 | RNVC: 2
B90271A: RNCC: 5 | RNVC: 2
B90271A/001: RNCC: 5 | RNVC: 2
PLGA468001: RNCC: 5 | RNVC: 2
3201-16295-0010: RNCC: 5 | RNVC: 2
572-523-9010: RNCC: 5 | RNVC: 2
B90271: RNCC: 5 | RNVC: 2
42312D125: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-01-582-0421
Loop Clamp

015820421
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C14KW: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-01-703-2115
Loop Clamp

017032115
BACC10GE16: RNCC: 3 | RNVC: 1

23 Aug 2022

5340-01-705-5990
Mounting Bracket

017055990
4982234: RNCC: 3 | RNVC: 2
A066V604: RNCC: 5 | RNVC: 9
A066V946 FIND NUMBER 2: RNCC: C | RNVC: 1
A066V946: RNCC: D | RNVC: 9

28 Sep 2022

5340-01-706-1167
Mounting Bracket

017061167
842-447183-37: RNCC: 3 | RNVC: 2

1 Nov 2022

5340-01-656-7456
Loop Clamp

016567456
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D28-17N: RNCC: 3 | RNVC: 2

15 Jul 2016

5340-01-702-4348
Seal Retaining Plate

017024348
114T4225-4: RNCC: 3 | RNVC: 2

7 Jul 2022

5340-01-706-4736
Mounting Plate

017064736
A3417311-0: RNCC: 3 | RNVC: 2
A3417311: RNCC: D | RNVC: 9

29 Nov 2022

5340-01-706-4879
Loop Clamp

017064879
NAS1714C2-9T: RNCC: 3 | RNVC: 2

30 Nov 2022

5340-01-705-5755
Dust And Moisture Seal Protective Cap

017055755
CF-09-P: RNCC: 3 | RNVC: 2

28 Sep 2022

5340-01-706-3601
Loop Clamp

017063601
1244684: RNCC: 3 | RNVC: 2

18 Nov 2022

5340-01-707-1597
Angle Bracket

017071597
326P1S0841-103: RNCC: 3 | RNVC: 2

19 Jan 2023

5340-01-707-1612
Double Angle Bracket

017071612
326P1J0227-101: RNCC: 3 | RNVC: 2

19 Jan 2023

5340-01-705-6369
Rigid Connecting Link

017056369
B001200C01002-9: RNCC: 3 | RNVC: 2

30 Sep 2022

5340-01-706-3882
Mounting Bracket

017063882
438-9017: RNCC: 1 | RNVC: 2
438-9017-2: RNCC: 3 | RNVC: 2

21 Nov 2022

5340-01-706-3954
Mounting Plate

017063954
SSP-340-253: RNCC: 3 | RNVC: 2
SSP-340-253: RNCC: 5 | RNVC: 2

21 Nov 2022

5340-01-707-2082
Dust And Moisture Seal Protective Cover

017072082
ADTS405-1892-74-M0: RNCC: 3 | RNVC: 2

23 Jan 2023

5340-01-706-4152
Mounting Plate

017064152
FF1-500-163: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-705-6451
Mounting Bracket

017056451
A3381433-0: RNCC: 3 | RNVC: 2

30 Sep 2022

5340-01-706-4161
Mounting Plate

017064161
FWQ-450-018: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-707-2641
Block Clamp

017072641
842-349847-52: RNCC: 3 | RNVC: 1

25 Jan 2023

5340-01-705-7541
Dust And Moisture Seal Protective Cap

017057541
758000-000: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-707-3080
Dust And Moisture Seal Boot

017073080
1065779: RNCC: 3 | RNVC: 2
1183099: RNCC: D | RNVC: 9

27 Jan 2023

5340-01-706-2881
Drawer Slide Set

017062881
1457657-P: RNCC: 3 | RNVC: 2

14 Nov 2022

5340-01-706-3187
Angle Bracket

017063187
B003310M05076-0043: RNCC: 3 | RNVC: 2
B003310M05076 PL: RNCC: D | RNVC: 9

16 Nov 2022

5340-01-705-5994
Nut And Bolt Retainer

017055994
L1700234-015: RNCC: 3 | RNVC: 2
L1700234: RNCC: D | RNVC: 9

28 Sep 2022

5340-01-706-3761
Mounting Bracket

017063761
60438-2: RNCC: 3 | RNVC: 2

18 Nov 2022

5340-01-706-3777
Retaining Harness

017063777
EH-46002-1: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-708-2954
Helical Compression Spring Seat

017082954
79199: RNCC: 3 | RNVC: 2

28 Mar 2023

5340-01-707-1853
Double Angle Bracket

017071853
326P1S0603-101: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-705-6793
Access Cover

017056793
5-13-10847-1: RNCC: 3 | RNVC: 2
5-13-10847: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-706-4327
Mounting Plate

017064327
FWQ-400-004: RNCC: 3 | RNVC: 2

23 Nov 2022

5340-01-705-6818
Section Block Clamp

017056818
NGC500EG-1A2: RNCC: 3 | RNVC: 2
NGC500EG-1A2: RNCC: 5 | RNVC: 2
NGC500EG-1A2: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-705-7150
Sliding Door Track

017057150
1061A-01-22-11: RNCC: 3 | RNVC: 2

6 Oct 2022

5340-01-707-3116
Cover Strip

017073116
06353558: RNCC: 3 | RNVC: 2
06353558: RNCC: 5 | RNVC: 2

27 Jan 2023

5340-01-705-7260
Section Block Clamp

017057260
NGC500EG-7C3: RNCC: 3 | RNVC: 2
NGC500EG-7C3: RNCC: 5 | RNVC: 2
NGC500EG-7C3: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

6 Oct 2022

5340-01-708-6436
Bumper

017086436
3673310M177-23: RNCC: 3 | RNVC: 2

14 Apr 2023

5340-01-707-0907
Utility Access Door

017070907
1162532: RNCC: 3 | RNVC: 2

17 Jan 2023

5340-01-706-3789
Bow Handle

017063789
86487: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-083-6693
Loop Clamp

010836693
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C5KH: RNCC: 3 | RNVC: 2
MS9350-04: RNCC: 5 | RNVC: 9

28 Sep 1979

5340-01-091-2778
Mounting Bracket

010912778
SAE-AS9551: RNCC: 3 | RNVC: 1
MS9551-014: RNCC: 3 | RNVC: 2
MS9551-014: RNCC: 5 | RNVC: 2
MS9551-014: RNCC: 5 | RNVC: 9

5 Mar 1980

5340-01-085-5205
Loop Clamp

010855205
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D4NW: RNCC: 3 | RNVC: 2
NAS1715D4N: RNCC: C | RNVC: 1

9 Nov 1979

5340-01-088-0292
Spacing Threaded Standoff

010880292
NAS1831: RNCC: 3 | RNVC: 1
810AS1056: RNCC: 3 | RNVC: 2
NAS1831C4B08: RNCC: 3 | RNVC: 2
10122104: RNCC: 6 | RNVC: 9
1921B: RNCC: C | RNVC: 1
990031-1: RNCC: C | RNVC: 1

4 Jan 1980

5340-01-088-2248
Butt Hinge

010882248
AA55594-18E: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
AA55594-18E: RNCC: 5 | RNVC: 1
MS35829-18E: RNCC: 5 | RNVC: 9
MS35829-18E: RNCC: 5 | RNVC: 9

8 Jan 1980

5340-01-710-9644
Mounting Bracket

017109644
5-13-10116-1: RNCC: 3 | RNVC: 2
5-13-10116-1: RNCC: 5 | RNVC: 2
5-13-10116: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-9682
Angle Bracket

017109682
8668264-024: RNCC: 3 | RNVC: 2
565-8668264: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-9772
Retaining Strap

017109772
9134M25P332: RNCC: 3 | RNVC: 2
F49781-3: RNCC: 5 | RNVC: 2
9134M25: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-710-9854
Mounting Plate

017109854
12640362: RNCC: 3 | RNVC: 2
12640362: RNCC: C | RNVC: 1

12 Jul 2023

5340-01-710-8958
Utility Guard Rail Section

017108958
123SME90130-47: RNCC: 3 | RNVC: 2

6 Jul 2023

5340-01-536-3545
Self-Locking Insert

015363545
V2B11790-NN: RNCC: 3 | RNVC: 1
7383858-V3D10436-14: RNCC: 5 | RNVC: 1
H547-0001-V3D10436-14: RNCC: 5 | RNVC: 1
V3D10436 ITEM 14: RNCC: 5 | RNVC: 1
V3C10333-6: RNCC: 5 | RNVC: 1
V3C10332-4: RNCC: 5 | RNVC: 1
7383858-V3D10436-14CP: RNCC: 5 | RNVC: 2
H547-0001-V3D10436-14CP: RNCC: 5 | RNVC: 2
V2B11790-NNCP: RNCC: 5 | RNVC: 2
V3C10332-4CP: RNCC: 5 | RNVC: 2

30 Dec 2005

5340-01-655-9832
Kick Door Plate

016559832
146T8027Y10: RNCC: 3 | RNVC: 1
146T8027-10: RNCC: C | RNVC: 1

13 Jun 2016

5340-01-205-8833
Electrical-Mechanical Equipment Post

012058833
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B6E16: RNCC: 3 | RNVC: 2

12 Apr 1985

5340-00-998-0601
Spring Tension Clip

009980601
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-101-10C: RNCC: 3 | RNVC: 2

25 Nov 1966

5340-01-034-6798
Snap Hook

010346798
NASM43770/12: RNCC: 3 | RNVC: 1
M43770/12-MIZE1: RNCC: 3 | RNVC: 2
MS51828-12M: RNCC: 5 | RNVC: 9
M43770/12-MIZE1: RNCC: 5 | RNVC: 9
MIL-S-43770/12: RNCC: 5 | RNVC: 9
MS51828-12M1: RNCC: C | RNVC: 1

28 Jan 1977

5340-00-964-3664
Loop Clamp

009643664
SAE-AS25281: RNCC: 3 | RNVC: 1
AS25281R11: RNCC: 3 | RNVC: 2
AS25281R11: RNCC: 3 | RNVC: 9
23C250-11: RNCC: 5 | RNVC: 1
MS25281-11: RNCC: 5 | RNVC: 2
MS25281R11: RNCC: 5 | RNVC: 9
MS25281-11: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-935-5918
Loop Clamp

009355918
SAE-AS9391: RNCC: 3 | RNVC: 1
MS9391-03: RNCC: 3 | RNVC: 2
AS9391-03: RNCC: 3 | RNVC: 9
AS9391-03: RNCC: 5 | RNVC: 9
MS9391-03: RNCC: 5 | RNVC: 9

15 Dec 1967

5340-00-989-4255
Spring Tension Clip

009894255
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-311: RNCC: 3 | RNVC: 2
100-200-9-3: RNCC: 5 | RNVC: 2
336253-11: RNCC: 5 | RNVC: 2
MS1716O-111: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-311: RNCC: 5 | RNVC: 9
NASM24066/2-311: RNCC: 5 | RNVC: 9
10117524: RNCC: 6 | RNVC: 9
M24066-2-111: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-940-9458
Support Hook

009409458
NAS622: RNCC: 3 | RNVC: 1
NAS622T3: RNCC: 3 | RNVC: 2
NAS622-T3: RNCC: 3 | RNVC: 2
5340PL0846435: RNCC: 6 | RNVC: 9

11 Dec 1965

5340-01-062-9800
Angle Bracket

010629800
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-022: RNCC: 3 | RNVC: 2
MS9593-022: RNCC: 3 | RNVC: 9
MS9593-022: RNCC: 5 | RNVC: 9

24 Jul 1978

5340-01-054-1579
Butt Hinge

010541579
AA55589-6A: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-6A: RNCC: 5 | RNVC: 9
MS35821-6A: RNCC: 5 | RNVC: 9
135125-001: RNCC: 5 | RNVC: 9
MS35821-1A: RNCC: C | RNVC: 1

15 Jan 1978

5340-01-054-1766
Butt Hinge

010541766
AA55592-10A: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
3050356P2: RNCC: 5 | RNVC: 1
MS35825-10A: RNCC: 5 | RNVC: 1
MS35825-10A: RNCC: 5 | RNVC: 9
AA5592-10A: RNCC: 5 | RNVC: 9
5340006821592: RNCC: 5 | RNVC: 9
5340006821592: RNCC: 6 | RNVC: 9
5340010541766: RNCC: 6 | RNVC: 9
8554: RNCC: C | RNVC: 1

16 Jan 1978

5340-01-054-4939
Butt Hinge

010544939
AA55590-16A: RNCC: 2 | RNVC: 2
A-A-55590-16A: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-16A: RNCC: 5 | RNVC: 9
MS35822-16A: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-00-964-2557
Loop Clamp

009642557
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P8N: RNCC: 3 | RNVC: 2
5340009642557: RNCC: 5 | RNVC: 9
5340PL0975462: RNCC: 6 | RNVC: 9
1-2-4T140: RNCC: C | RNVC: 1
165946: RNCC: C | RNVC: 1
777: RNCC: C | RNVC: 1
CLN 3/8 NATURAL: RNCC: C | RNVC: 1
B187625-7: RNCC: C | RNVC: 1
HP8N: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-999-3992
Spring Tension Clip

009993992
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-218: RNCC: 3 | RNVC: 2
100-300-5-25: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-218: RNCC: 5 | RNVC: 9
M24066-2-021: RNCC: 5 | RNVC: 9
6009-161CC: RNCC: 5 | RNVC: 9
M24066-2-218: RNCC: C | RNVC: 1

11 Apr 1966

5340-00-999-3993
Spring Tension Clip

009993993
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-221: RNCC: 3 | RNVC: 2
100-300-6-9: RNCC: 5 | RNVC: 1
MS17160-121: RNCC: 5 | RNVC: 9
6010-4-1CC: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-221: RNCC: 5 | RNVC: 9
MS24066-2-021: RNCC: 5 | RNVC: 9
457-5720: RNCC: 6 | RNVC: 9

11 Apr 1966

5340-01-048-9667
Angle Bracket

010489667
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-014: RNCC: 3 | RNVC: 2
MS9601-014: RNCC: 5 | RNVC: 9

8 Oct 1977

5340-01-012-5366
Loop Clamp

010125366
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C8SW: RNCC: 3 | RNVC: 2

12 Nov 1975

5340-01-054-0068
Butt Hinge

010540068
AA55594-11D: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-11D: RNCC: 5 | RNVC: 1
MS35829-11D: RNCC: 5 | RNVC: 9

13 Jan 1978

5340-01-030-3510
Retaining Strap

010303510
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-8T: RNCC: 3 | RNVC: 2

3 Nov 1976

5340-01-701-3614
Dust And Moisture Seal Protective Cover

017013614
V042217: RNCC: 3 | RNVC: 2

12 May 2022

5340-01-710-7091
Dust And Moisture Seal Protective Cap

017107091
C03-1000-B2: RNCC: 3 | RNVC: 2
4328677: RNCC: 7 | RNVC: 2

20 Jun 2023

5340-01-710-7890
Mounting Bracket

017107890
A1-55257D: RNCC: 3 | RNVC: 2

26 Jun 2023

5340-01-710-8230
Pad Eye

017108230
803-7286468-PC-37: RNCC: 3 | RNVC: 2
2633-326-02-PC-37: RNCC: C | RNVC: 1
803-7286468: RNCC: D | RNVC: 9

28 Jun 2023

5340-01-710-7949
Cushioning Pad

017107949
12242-3016-1: RNCC: 3 | RNVC: 2
12247-3016: RNCC: D | RNVC: 9

26 Jun 2023

5340-01-710-8316
Mounting Bracket

017108316
12645998: RNCC: 3 | RNVC: 2

28 Jun 2023

5340-01-710-8459
Mounting Bracket

017108459
12640315: RNCC: 3 | RNVC: 2
12640315-002: RNCC: C | RNVC: 1

29 Jun 2023

5340-01-096-1499
Loop Clamp

010961499
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D28-12N: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-00-984-6629
Synchro Clamp

009846629
271166: RNCC: 3 | RNVC: 2
11454397: RNCC: 5 | RNVC: 1
781-903-003: RNCC: 5 | RNVC: 2
C121Z6C41: RNCC: 5 | RNVC: 2
781-903-003: RNCC: 5 | RNVC: 2
309074: RNCC: 5 | RNVC: 2
802027335916-2: RNCC: 5 | RNVC: 2
271166: RNCC: 5 | RNVC: 2
966767-001: RNCC: 5 | RNVC: 2
271166000: RNCC: 5 | RNVC: 2

26 Oct 1966

5340-01-014-0087
Loop Clamp

010140087
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R14: RNCC: 3 | RNVC: 2
NMC-CL141N-14: RNCC: 5 | RNVC: 2
MS25281-14: RNCC: 5 | RNVC: 2
9M843-14: RNCC: 5 | RNVC: 2
MIL-S-23190: RNCC: 5 | RNVC: 9
MS25281R14: RNCC: 5 | RNVC: 9
MS25281-14: RNCC: 5 | RNVC: 9
MS25281-R14: RNCC: 5 | RNVC: 9
AS25281: RNCC: 5 | RNVC: 9

12 Dec 1975

5340-00-921-6993
Loop Clamp

009216993
NASM21334: RNCC: 3 | RNVC: 1
MS21334-32: RNCC: 3 | RNVC: 2
MS21334-32: RNCC: 5 | RNVC: 9

11 Apr 1966

5340-01-058-4470
Loop Clamp

010584470
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-7TW: RNCC: 3 | RNVC: 2
NAS1714C2-7KW: RNCC: C | RNVC: 1

27 Mar 1978

5340-01-046-5897
Loop Clamp

010465897
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P12B: RNCC: 3 | RNVC: 2

19 Aug 1977

5340-01-015-0709
Mending Plate

010150709
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-004: RNCC: 3 | RNVC: 2
MS9552-004: RNCC: 5 | RNVC: 1
MS9552-004: RNCC: 5 | RNVC: 9

14 Jan 1976

5340-01-015-1037
Angle Bracket

010151037
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-042: RNCC: 3 | RNVC: 2
MS9601-042: RNCC: 5 | RNVC: 9

15 Jan 1976

5340-00-926-5334
Loop Clamp

009265334
NASM21333: RNCC: 3 | RNVC: 1
MS21333-21: RNCC: 3 | RNVC: 2
MS21333-21: RNCC: 5 | RNVC: 9

24 Aug 1966

5340-01-049-6353
Loop Clamp

010496353
MS25281R28: RNCC: 2 | RNVC: 2
AS25281: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
SAE-AS25281: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
AS25281: RNCC: 5 | RNVC: 9
10117574: RNCC: 6 | RNVC: 9
MS25281-R28: RNCC: C | RNVC: 1

21 Oct 1977

5340-00-929-1794
Loop Clamp

009291794
NASM21334: RNCC: 3 | RNVC: 1
MS21334-31: RNCC: 3 | RNVC: 2
MS21334-31: RNCC: 5 | RNVC: 9

7 Sep 1966

5340-01-055-4193
Butt Hinge

010554193
AA55592-12C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-12C: RNCC: 5 | RNVC: 1
MS35825-12C: RNCC: 5 | RNVC: 9
5340PL0846594: RNCC: 6 | RNVC: 9

4 Feb 1978

5340-00-949-3788
Expansion Plug

009493788
SAE-AS9380: RNCC: 3 | RNVC: 1
MS9380-09: RNCC: 3 | RNVC: 2
MS9380-09: RNCC: 3 | RNVC: 9
MS9380-09: RNCC: 5 | RNVC: 9
1353AS153-1: RNCC: C | RNVC: 1
501514: RNCC: E | RNVC: 8

15 Apr 1966

5340-00-929-3506
Loop Clamp

009293506
NASM21322: RNCC: 3 | RNVC: 1
MS21322-40: RNCC: 3 | RNVC: 2
MS21322-40: RNCC: 5 | RNVC: 9

7 Sep 1966

5340-01-055-4200
Butt Hinge

010554200
AA55589-7C: RNCC: 2 | RNVC: 2
AA5589-7C: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-7C: RNCC: 5 | RNVC: 1
MS35821-7C: RNCC: 5 | RNVC: 9
MS35821-2C: RNCC: 5 | RNVC: 9

4 Feb 1978

5340-01-049-6334
Butt Hinge

010496334
AA55593-10A: RNCC: 2 | RNVC: 2
A-A-55593-10A: RNCC: 2 | RNVC: 2
A-A-55593: RNCC: 4 | RNVC: 1
MS35826-10A: RNCC: 5 | RNVC: 1
MS35826-10A: RNCC: 5 | RNVC: 9
MS35826-2A: RNCC: 5 | RNVC: 9

21 Oct 1977

5340-00-899-2578
Rod End Locking Retainer

008992578
NAS1193: RNCC: 3 | RNVC: 1
NAS1193-10C: RNCC: 3 | RNVC: 2

3 Feb 1967

5340-00-917-5112
Loop Clamp

009175112
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R14B: RNCC: 3 | RNVC: 2
NAS1397R148: RNCC: C | RNVC: 1

1 Aug 1966

5340-00-915-2363
Rod End Locking Retainer

009152363
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K16C: RNCC: 3 | RNVC: 2
NAS1193-16: RNCC: C | RNVC: 1

6 Jul 1966

5340-00-889-3287
Clamp Bolt Assembly

008893287
NAS573: RNCC: 3 | RNVC: 1
NAS573-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-915-4820
Spring Tension Clip

009154820
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-026-10C: RNCC: 3 | RNVC: 2
6008-70C: RNCC: 5 | RNVC: 9

13 Jul 1966

5340-01-054-1386
Butt Hinge

010541386
AA55595-14A: RNCC: 2 | RNVC: 2
A-A-55595: RNCC: 4 | RNVC: 1
MS35830-14A: RNCC: 5 | RNVC: 9
MS35830-14A: RNCC: 5 | RNVC: 9

14 Jan 1978

5340-00-662-9787
Spring Tension Clip

006629787
1JA2730-2: RNCC: 3 | RNVC: 2
160726-1: RNCC: 5 | RNVC: 2
343-1003P2: RNCC: 5 | RNVC: 2
420-53-4138: RNCC: 5 | RNVC: 2
TH15: RNCC: 5 | RNVC: 2
343-1003-2: RNCC: 5 | RNVC: 2
1JA2730-2: RNCC: 5 | RNVC: 2
343-1003P2: RNCC: 5 | RNVC: 2
115-18-4: RNCC: 5 | RNVC: 2
9073252: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-828-8802
Dust And Moisture Seal Protective Plug

008288802
NAS836: RNCC: 3 | RNVC: 1
NAS836-8A: RNCC: 3 | RNVC: 2
M5501/1-8: RNCC: 5 | RNVC: 9
MIL-C-5501/1: RNCC: 5 | RNVC: 9
NAS818B8: RNCC: 5 | RNVC: 9
ANOASP-8: RNCC: 5 | RNVC: 9
45197-8: RNCC: 5 | RNVC: 9
10129614: RNCC: 6 | RNVC: 9
5340PL1867822: RNCC: 6 | RNVC: 9
ANOASP-8: RNCC: C | RNVC: 1

1 Jan 1962

NSN 5340-00-838-6986 008386986 PADLOCK SET

5340-00-838-6986
Padlock Set

008386986
AA59486-1AB40S4: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
MS21313-130: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-830-2916
Clamp Bolt Assembly

008302916
NAS573: RNCC: 3 | RNVC: 1
NAS573-4P: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-878-5257
Loop Clamp

008785257
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCF24: RNCC: 3 | RNVC: 2
AS21919WCF24: RNCC: 3 | RNVC: 9
900729-10: RNCC: 5 | RNVC: 2
35114057: RNCC: 5 | RNVC: 2
35114057: RNCC: 5 | RNVC: 2
35114057: RNCC: 5 | RNVC: 2
CV177796: RNCC: 5 | RNVC: 2
BM080026: RNCC: 5 | RNVC: 2
900729-10: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-881-3038
Snap Hook

008813038
PS22043-1: RNCC: 3 | RNVC: 2
PS22043A: RNCC: 5 | RNVC: 9
MS22043-1: RNCC: 5 | RNVC: 9
M1161-813010: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-882-5070
Dust And Moisture Seal Protective Cap-Plug

008825070
NAS834: RNCC: 3 | RNVC: 1
NAS834-67: RNCC: 3 | RNVC: 2
8X: RNCC: 5 | RNVC: 1
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F15: RNCC: 5 | RNVC: 9
2413675: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-942-2207
Arched Cushion

009422207
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-03: RNCC: 3 | RNVC: 2
MS9393-03: RNCC: 3 | RNVC: 9
MS9393-03: RNCC: 5 | RNVC: 9

11 Dec 1965

5340-01-470-6723
Loop Clamp

014706723
NW33103: RNCC: 3 | RNVC: 2
P14-8341: RNCC: 5 | RNVC: 2
6004002631: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-01-710-8560
Mounting Bracket

017108560
12641917: RNCC: 3 | RNVC: 2

30 Jun 2023

5340-01-204-5677
Spring Tension Clip

012045677
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-030: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-030: RNCC: 5 | RNVC: 9

28 Mar 1985

5340-00-664-6395
Buckle

006646395
AA55620-9S: RNCC: 2 | RNVC: 2
A-A-55620: RNCC: 4 | RNVC: 1
826720: RNCC: 5 | RNVC: 1
MS51940-9S: RNCC: 5 | RNVC: 9
02300-1: RNCC: 5 | RNVC: 9
MS51940-95: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-817-4708
Electrical-Mechanical Equipment Post

008174708
8106SS0440-7: RNCC: 3 | RNVC: 9
S07-3: RNCC: 5 | RNVC: 2
SM-B-529150-1: RNCC: 5 | RNVC: 2
HJ3: RNCC: 5 | RNVC: 2
860314-62: RNCC: 5 | RNVC: 9
ST5H016C9-050: RNCC: 5 | RNVC: 9
019215-9: RNCC: 5 | RNVC: 9
SM-C-772734-1: RNCC: 7 | RNVC: 2
8106SS0440-7: RNCC: C | RNVC: 1
860314-62: RNCC: C | RNVC: 1

8 Apr 1968

5340-00-619-3343
Loop Clamp

006193343
X18: RNCC: 3 | RNVC: 2
303225: RNCC: 5 | RNVC: 2
X200: RNCC: 5 | RNVC: 2
800726: RNCC: 5 | RNVC: 2
UCL200: RNCC: 5 | RNVC: 2
X18: RNCC: 5 | RNVC: 2
1603325: RNCC: 5 | RNVC: 2
17420C3: RNCC: 5 | RNVC: 2
3754883: RNCC: 5 | RNVC: 2
6311: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-821-5871
Buckle

008215871
AA55620-3S: RNCC: 2 | RNVC: 2
A-A-55620: RNCC: 4 | RNVC: 1
MS51940-3S: RNCC: 5 | RNVC: 9
5340-821-5871: RNCC: 5 | RNVC: 9
5340008215871: RNCC: 5 | RNVC: 9
MS51940-3S: RNCC: 8 | RNVC: 1

1 Jan 1962

5340-00-787-8674
Synchro Clamp

007878674
9191780: RNCC: 3 | RNVC: 2
L3-3: RNCC: 5 | RNVC: 2
10018643-001: RNCC: 5 | RNVC: 2
993905-01: RNCC: 5 | RNVC: 2
10345741: RNCC: 5 | RNVC: 2
F115-8: RNCC: 5 | RNVC: 2
134283-008: RNCC: 5 | RNVC: 2
11732805: RNCC: 5 | RNVC: 2
106064-337: RNCC: 5 | RNVC: 2
SQ-8: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-760-7366
Angle Bracket

007607366
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-005: RNCC: 3 | RNVC: 2
MS9592-005: RNCC: 3 | RNVC: 9
MS9592-005: RNCC: 5 | RNVC: 9
10117447: RNCC: 6 | RNVC: 9

27 Oct 1969

5340-00-769-2391
Nut And Bolt Retainer

007692391
NAS578: RNCC: 3 | RNVC: 1
NAS578-10A: RNCC: 3 | RNVC: 2
2577-108 RET: RNCC: 5 | RNVC: 9
10117448: RNCC: 6 | RNVC: 9
2577-108 RET: RNCC: C | RNVC: 1

1 Jan 1960

Load More Results