What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 20 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 20 of 1045

5340-01-705-5191
Clamping Catch

017055191
9-2-6900: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-707-6557
Access Cover

017076557
986-4201-001: RNCC: 3 | RNVC: 2

14 Feb 2023

5340-01-705-5088
Friction Catch

017055088
9-2-6975: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-706-9216
Bow Handle

017069216
V700013-000: RNCC: 3 | RNVC: 2

3 Jan 2023

5340-01-706-1873
Angle Bracket

017061873
12603408: RNCC: 3 | RNVC: 2
12603408: RNCC: 5 | RNVC: 1

7 Nov 2022

5340-01-706-9240
Mounting Bracket

017069240
5143850-458: RNCC: 3 | RNVC: 2

4 Jan 2023

5340-01-707-6861
Mounting Bracket

017076861
1004898-PB: RNCC: 3 | RNVC: 2

16 Feb 2023

5340-01-706-2665
Utility Access Door

017062665
12639227: RNCC: 3 | RNVC: 2

12 Nov 2022

5340-01-706-2397
Spring Tension Clip

017062397
98-31651: RNCC: 3 | RNVC: 2
4184826: RNCC: 7 | RNVC: 2

9 Nov 2022

5340-01-706-9617
Loop Clamp

017069617
9NG0012D7NB: RNCC: 3 | RNVC: 2
40005D7Y: RNCC: 5 | RNVC: 2
TA0220055DC7NB: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

5 Jan 2023

5340-01-706-9548
Loop Clamp

017069548
AS5587D18: RNCC: 3 | RNVC: 2
AS5587: RNCC: D | RNVC: 9

5 Jan 2023

5340-01-707-6677
Rigid Connecting Link

017076677
N9837: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-707-8735
Mounting Bracket

017078735
3363805-7: RNCC: 3 | RNVC: 2
3363805: RNCC: D | RNVC: 9

28 Feb 2023

5340-01-706-2513
Access Cover

017062513
82-2-B-000: RNCC: 3 | RNVC: 2
17-61420-04: RNCC: 7 | RNVC: 2
17-61420: RNCC: D | RNVC: 9

10 Nov 2022

5340-01-707-0409
Cover Strip

017070409
13102610-2: RNCC: 3 | RNVC: 2
13102610: RNCC: D | RNVC: 9

11 Jan 2023

5340-01-707-0638
Vehicle Cargo Tie Down

017070638
SRPV2200388-115: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-707-0778
Crank Handle

017070778
AP001110: RNCC: 3 | RNVC: 2

13 Jan 2023

5340-01-707-8510
Mounting Bracket

017078510
438-9010 ICD: RNCC: 1 | RNVC: 2
438-9010: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-707-8714
Threaded Rod End

017078714
561-6985000-207: RNCC: 3 | RNVC: 2
H444-0504-207: RNCC: 5 | RNVC: 9
6985000: RNCC: D | RNVC: 9

28 Feb 2023

5340-01-707-7995
Butt Hinge Leaf

017077995
78207-03002-126: RNCC: 3 | RNVC: 2
78207-03002: RNCC: D | RNVC: 9

23 Feb 2023

5340-01-707-8329
Blank Panel

017078329
4106AS0110-07: RNCC: 3 | RNVC: 2
4106AS0110: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-707-8199
Block Clamp

017078199
383019-1: RNCC: 3 | RNVC: 2

24 Feb 2023

5340-01-707-6428
Angle Bracket

017076428
581-6985421-53: RNCC: 3 | RNVC: 2
H611-1405-53: RNCC: C | RNVC: 1

14 Feb 2023

5340-01-705-9359
Runner

017059359
5498594-9: RNCC: 3 | RNVC: 2
5498594: RNCC: D | RNVC: 9

22 Oct 2022

5340-01-706-0359
Angle Bracket

017060359
12608973: RNCC: 3 | RNVC: 2
12608973: RNCC: 3 | RNVC: 2

26 Oct 2022

5340-01-706-0150
Mounting Plate

017060150
12609637: RNCC: 3 | RNVC: 2
12609637: RNCC: 5 | RNVC: 2

25 Oct 2022

5340-01-707-6496
Loop Clamp

017076496
379-55: RNCC: 3 | RNVC: 2
20916: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-706-0783
Headless Straight Rod

017060783
12638732: RNCC: 3 | RNVC: 2

31 Oct 2022

5340-01-706-9008
Buckle

017069008
B003310M05076-0051: RNCC: 3 | RNVC: 2

30 Dec 2022

5340-01-707-6503
Cushioning Pad

017076503
12582100-101: RNCC: 3 | RNVC: 2
12582100: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-706-0842
Angle Bracket

017060842
12680572: RNCC: 3 | RNVC: 2

31 Oct 2022

5340-01-706-1129
Mounting Plate

017061129
5-13-11283-1: RNCC: 3 | RNVC: 2

1 Nov 2022

5340-01-707-1486
Double Angle Bracket

017071486
9M1080-4: RNCC: 3 | RNVC: 2
9M1080-4: RNCC: 5 | RNVC: 2
9M1080-4: RNCC: 5 | RNVC: 2

19 Jan 2023

5340-01-707-1605
Double Angle Bracket

017071605
326P1S0807-103: RNCC: 3 | RNVC: 2

19 Jan 2023

5340-01-706-4919
Mounting Bracket

017064919
8600293-009: RNCC: 3 | RNVC: 2
8600293: RNCC: D | RNVC: 9

30 Nov 2022

5340-01-705-8141
Mounting Bracket

017058141
12610760: RNCC: 3 | RNVC: 2
12610760: RNCC: 5 | RNVC: 9

14 Oct 2022

5340-01-708-3032
Mounting Plate

017083032
17008A0609: RNCC: 3 | RNVC: 2

28 Mar 2023

5340-01-707-1750
Caster Wheel

017071750
P000357: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-705-8236
Roller Holder

017058236
7378012: RNCC: 3 | RNVC: 2

14 Oct 2022

5340-01-706-5541
Chassis Foot

017065541
P0056199: RNCC: 3 | RNVC: 2

6 Dec 2022

5340-01-707-2152
Access Cover

017072152
255-8357121-246: RNCC: 3 | RNVC: 2
H776-0551-246: RNCC: 5 | RNVC: 2
255-8357121: RNCC: D | RNVC: 9

23 Jan 2023

5340-01-706-5638
Pin Removable Head

017065638
5140349-458: RNCC: 3 | RNVC: 2
5140349: RNCC: D | RNVC: 9

6 Dec 2022

5340-01-705-8783
Rigid Connecting Link

017058783
4F53415-101A: RNCC: 3 | RNVC: 2
4F53415: RNCC: D | RNVC: 9

19 Oct 2022

5340-01-708-4347
Plain Solid Disk

017084347
HAN 656-1: RNCC: 3 | RNVC: 2
A-324-21 ITEM 37: RNCC: 5 | RNVC: 2

5 Apr 2023

5340-01-705-8884
Multiple Angle Bracket

017058884
A3417314-0: RNCC: 3 | RNVC: 2

19 Oct 2022

5340-01-705-8891
Mounting Bracket

017058891
A3417323-0: RNCC: 3 | RNVC: 2

19 Oct 2022

5340-01-707-2687
Mounting Plate

017072687
842-349623-3: RNCC: 3 | RNVC: 1

25 Jan 2023

5340-01-705-8494
Mounting Bracket

017058494
12596580: RNCC: 3 | RNVC: 2

17 Oct 2022

5340-01-705-6791
Mounting Bracket

017056791
LS1155803: RNCC: 3 | RNVC: 2

4 Oct 2022

5340-01-705-6866
Block Clamp

017056866
NGC500EG-2A10: RNCC: 3 | RNVC: 2
NGC500EG-2A10: RNCC: 5 | RNVC: 2
NGC500EG-2A10: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-705-6872
Block Clamp

017056872
NGC500EG-2A1: RNCC: 3 | RNVC: 2
NGC500EG-2A1: RNCC: 5 | RNVC: 2
NGC500EG-2A1: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-706-3784
Bumper

017063784
140644: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-705-6850
Section Block Clamp

017056850
NGC500EG-2A11: RNCC: 3 | RNVC: 2
NGC500EG-2A11: RNCC: 5 | RNVC: 2
NGC500EG-2A11: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-706-3971
Block Clamp

017063971
61298-00033-1: RNCC: 3 | RNVC: 2
61298-00033: RNCC: D | RNVC: 9

21 Nov 2022

5340-01-706-4155
Mounting Plate

017064155
FWQ-450-017: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-705-7240
Access Cover

017057240
5-13-11192-1: RNCC: 3 | RNVC: 2
5-13-11192: RNCC: D | RNVC: 9

6 Oct 2022

5340-01-706-4159
Mounting Plate

017064159
FWQ-450-004: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-707-1396
Manual Control Handle

017071396
13071346: RNCC: 3 | RNVC: 2

19 Jan 2023

5340-01-707-1005
Angle Bracket

017071005
326P1J0213-102: RNCC: 3 | RNVC: 2

17 Jan 2023

5340-01-707-1226
Multiple Angle Bracket

017071226
326P1J0219-101: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-705-7665
Cover Strip

017057665
13102619: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-705-7731
Webbing Strap

017057731
3026-009207: RNCC: 3 | RNVC: 2

12 Oct 2022

5340-01-705-7801
Angle Bracket

017057801
12609228: RNCC: 3 | RNVC: 2
12609228: RNCC: 5 | RNVC: 1

12 Oct 2022

5340-01-066-3984
Loop Clamp

010663984
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D11-32N: RNCC: 3 | RNVC: 2

9 Oct 1978

5340-01-706-2758
Dust And Moisture Seal Protective Plug

017062758
7165-0349: RNCC: 3 | RNVC: 2
12606540: RNCC: 7 | RNVC: 2

14 Nov 2022

5340-01-706-3327
Mounting Bracket

017063327
200799766: RNCC: 3 | RNVC: 2

16 Nov 2022

5340-01-706-3507
Spacing Threaded Standoff

017063507
CB3001CRA3-9HP: RNCC: 3 | RNVC: 2
NGS500EE3-9HP: RNCC: 5 | RNVC: 2

17 Nov 2022

5340-01-705-6590
Loop Clamp

017056590
842-349570-7: RNCC: 3 | RNVC: 2

3 Oct 2022

5340-01-706-3539
Mounting Bracket

017063539
C01W10070: RNCC: 3 | RNVC: 2
C01W10070: RNCC: 3 | RNVC: 2
C01W10070: RNCC: 5 | RNVC: 2

17 Nov 2022

5340-01-705-6623
Mounting Bracket

017056623
6181288: RNCC: 3 | RNVC: 2
PL8214968-003: RNCC: D | RNVC: 9
8214968: RNCC: D | RNVC: 9

3 Oct 2022

5340-01-706-3634
Access Cover

017063634
4545505: RNCC: 3 | RNVC: 2
4545505: RNCC: 5 | RNVC: 9

18 Nov 2022

5340-01-460-2623
Loop Clamp

014602623
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D32N: RNCC: 3 | RNVC: 2
MS9351-31: RNCC: 5 | RNVC: 9

30 Oct 1998

5340-00-878-7392
Loop Clamp

008787392
MS9025-11: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Jan 1962

5340-01-026-3255
Spring Tension Clip

010263255
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-228: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
5340009149072: RNCC: 5 | RNVC: 9
M24066/2-228: RNCC: 5 | RNVC: 9
M24066/2-028: RNCC: 5 | RNVC: 9

21 Aug 1976

5340-01-459-4252
Spacing Threaded Standoff

014594252
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D56: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-01-496-4859
Retaining Strap

014964859
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D30-42N: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-00-983-0787
Loop Clamp

009830787
AN742F64: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AN742H64: RNCC: 5 | RNVC: 9

21 Oct 1966

5340-01-650-0941
Butt Hinge Leaf

016500941
MS20001PYA6-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

18 Nov 2015

5340-01-654-3286
Mounting Plate

016543286
284T0890Y5: RNCC: 3 | RNVC: 1
284T0890-5: RNCC: C | RNVC: 1

25 Apr 2016

5340-01-560-8768
Rim Latch

015608768
11E422008: RNCC: 3 | RNVC: 2
HL00-64003: RNCC: 5 | RNVC: 2
8694-1: RNCC: 5 | RNVC: 9

15 Feb 2008

5340-01-170-6662
Dust And Moisture Seal Protective Cap

011706662
NAS847: RNCC: 3 | RNVC: 1
NAS844-7: RNCC: 3 | RNVC: 2
MIL-C-5501/9: RNCC: 5 | RNVC: 9
M5501/9-F7: RNCC: 5 | RNVC: 9
826081-00: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-01-699-4066
Utility Guard Rail Section

016994066
26-1250-01-C: RNCC: 3 | RNVC: 2
600-7384421-4: RNCC: D | RNVC: 9

28 Jan 2022

5340-01-699-6557
Dust And Moisture Seal Protective Cap

016996557
202102: RNCC: 3 | RNVC: 2
J90-0103-903: RNCC: 3 | RNVC: 2
7014300: RNCC: 3 | RNVC: 2

16 Feb 2022

5340-01-701-3377
Access Cover

017013377
5802954379: RNCC: 3 | RNVC: 2
12402512000: RNCC: 5 | RNVC: 2
1091F411000: RNCC: 5 | RNVC: 9

11 May 2022

5340-01-708-1432
Dust And Moisture Seal Protective Plug

017081432
UP102-04: RNCC: 3 | RNVC: 2

17 Mar 2023

5340-01-459-2081
Lock-Release Lever

014592081
3-4903-SS-10: RNCC: 3 | RNVC: 2
3-4903-SS(01): RNCC: 5 | RNVC: 9

24 Sep 1998

5340-01-511-6943
Loop Clamp

015116943
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-20N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-702-6736
Mounting Bracket

017026736
65B67345-6: RNCC: 3 | RNVC: 2

19 Jul 2022

5340-01-702-7940
Threaded Rod End

017027940
ADNEL6-4046N: RNCC: 3 | RNVC: 2

28 Jul 2022

5340-01-552-7056
Access Cover

015527056
10059014: RNCC: 3 | RNVC: 2
13050815: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-01-460-5971
Spacing Threaded Standoff

014605971
NAS1829: RNCC: 3 | RNVC: 1
NAS1829-4C12: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-01-477-0825
Loop Clamp

014770825
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-18N: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-01-461-0183
Dust And Moisture Seal Protective Cap-Plug

014610183
NAS834: RNCC: 3 | RNVC: 1
NAS834-17: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-01-477-0802
Loop Clamp

014770802
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-20T: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-01-465-9031
Turnbuckle Body

014659031
MS21251-8L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

25 Jun 1999

5340-01-474-6955
Loop Clamp

014746955
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C34: RNCC: 3 | RNVC: 2
AN735C34: RNCC: 3 | RNVC: 9
AN735C34: RNCC: 5 | RNVC: 9
AS7351: RNCC: D | RNVC: 9

10 May 2000

5340-00-004-5195
Strap Fastener Loop

000045195
NAS1211: RNCC: 3 | RNVC: 1
NAS1211C17: RNCC: 3 | RNVC: 2

27 May 1972

5340-00-275-4669
Sliding Door Hanger

002754669
L100-1: RNCC: 3 | RNVC: 2
L100-2: RNCC: 5 | RNVC: 9

30 Jul 1973

5340-00-377-6642
Snap Hook

003776642
PS70121: RNCC: 3 | RNVC: 1
PS70121-1: RNCC: 3 | RNVC: 2
PS70121-1: RNCC: 3 | RNVC: 2
PS70121-1: RNCC: 5 | RNVC: 2
MS70121-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-617-8022
Retaining Strap

016178022
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8W32S: RNCC: 3 | RNVC: 2

4 Apr 2013

5340-01-563-0292
Helical Compression Spring Seat

015630292
7G4998: RNCC: 3 | RNVC: 2
7G-4998: RNCC: 5 | RNVC: 2

30 Apr 2008

5340-01-456-7326
Loop Clamp

014567326
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C10: RNCC: 3 | RNVC: 2
AN735C10: RNCC: 5 | RNVC: 9

24 Jun 1998

5340-00-935-8882
Spring Tension Clip

009358882
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-059-10C: RNCC: 3 | RNVC: 2

31 May 1968

5340-01-603-8428
Loop Clamp

016038428
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-48N: RNCC: 3 | RNVC: 2

19 Mar 2012

5340-01-434-2345
Dust And Moisture Seal Protective Cap

014342345
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-655: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-655: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-434-2376
Dust And Moisture Seal Protective Cap

014342376
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-1150: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-1150: RNCC: 5 | RNVC: 9
M55301/31-1150: RNCC: C | RNVC: 1

24 Jul 1996

5340-01-441-1273
Loop Clamp

014411273
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC4: RNCC: 3 | RNVC: 2
AN735DC4: RNCC: 5 | RNVC: 9

4 Feb 1997

5340-01-452-0345
Safety Cable Kit

014520345
C10-324: RNCC: 3 | RNVC: 2
C10-324PKG: RNCC: C | RNVC: 1

13 Jan 1998

5340-01-475-4142
Butt Hinge

014754142
MS20001P5-340: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

2 Jun 2000

5340-01-429-4985
Loop Clamp

014294985
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-10N: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-01-440-1726
Mounting Plate

014401726
3383C98H02: RNCC: 3 | RNVC: 1
LO-014401726: RNCC: 5 | RNVC: 2

7 Jan 1997

5340-01-432-0067
Loop Clamp

014320067
NAS1715: RNCC: 3 | RNVC: 1
S500-12: RNCC: 3 | RNVC: 2
11168-11: RNCC: 3 | RNVC: 2
JM44LC17-H12PB: RNCC: 3 | RNVC: 2
NAS1715C12Z: RNCC: 3 | RNVC: 2
NAS1715C12Z NON-ASBESTOS: RNCC: 5 | RNVC: 9
MS9825-11: RNCC: 5 | RNVC: 9
NAS1715C12M: RNCC: 5 | RNVC: 9

23 May 1996

5340-01-438-1854
Spacing Threaded Standoff

014381854
8C5608: RNCC: 3 | RNVC: 2
8C-5608: RNCC: 5 | RNVC: 2

1 Nov 1996

5340-01-415-8860
Retaining Strap

014158860
NASM85449/1: RNCC: 3 | RNVC: 1
M85449/1-20: RNCC: 3 | RNVC: 2
M85449/1-20: RNCC: 5 | RNVC: 9

9 Jul 1995

5340-00-068-1820
Rod End Clevis

000681820
MS21253-3RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21253-3RS: RNCC: 5 | RNVC: 1
NAS646-3RS: RNCC: 5 | RNVC: 9
234-22145-41: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-433-1919
Swivel Caster

014331919
A-A-55619-6SM: RNCC: 2 | RNVC: 2
AA55619-6SM: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1

24 Jun 1996

5340-01-413-7834
Loop Clamp

014137834
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C18Z: RNCC: 3 | RNVC: 2

23 May 1995

5340-01-441-7499
Loop Clamp

014417499
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C11TW: RNCC: 3 | RNVC: 2

23 Feb 1997

5340-01-413-8551
Loop Clamp

014138551
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C21Z: RNCC: 3 | RNVC: 2

24 May 1995

5340-01-393-1309
Bow Handle

013931309
NASM39087: RNCC: 3 | RNVC: 1
MS39087-407AN: RNCC: 3 | RNVC: 2
MS39087-407AN: RNCC: 5 | RNVC: 9

14 Jul 1994

5340-01-406-5470
Loop Clamp

014065470
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-6NW: RNCC: 3 | RNVC: 2

6 Jan 1995

5340-01-425-1477
Retaining Strap

014251477
NASM85449/3: RNCC: 3 | RNVC: 1
M85449/3-40: RNCC: 3 | RNVC: 2
NASN85449: RNCC: 5 | RNVC: 1
M85449/3-40: RNCC: 5 | RNVC: 9
MIL-C-85449: RNCC: 5 | RNVC: 9

22 Apr 1982

5340-00-229-4325
Butt Hinge

002294325
MS27958-36: RNCC: 2 | RNVC: 2
MS27958: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-240-2309
Barrel Bolt

002402309
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 L24213 2IN: RNCC: 3 | RNVC: 2
FFH00111TYPE1011: RNCC: 5 | RNVC: 9
ANSIA156.16TYL24213(2IN): RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-452-1149
Spacing Threaded Standoff

014521149
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C40: RNCC: 3 | RNVC: 2

16 Jan 1998

5340-01-358-4347
Loop Clamp

013584347
SAE-AS7351: RNCC: 3 | RNVC: 1
SAE AS7351: RNCC: 3 | RNVC: 2
AN735DC24: RNCC: 3 | RNVC: 2
SAE AS7351: RNCC: 3 | RNVC: 9
AN735DC24: RNCC: 5 | RNVC: 9
AN735DC24: RNCC: 5 | RNVC: 9

14 May 1992

5340-01-379-6065
Retaining Strap

013796065
NASM85449/1: RNCC: 3 | RNVC: 1
M85449/1-40: RNCC: 3 | RNVC: 2
MIL-C-85449/1B: RNCC: 5 | RNVC: 9
M85449/1-40: RNCC: 5 | RNVC: 9

3 Sep 1993

5340-01-396-9614
Loop Clamp

013969614
TA4C99D8T: RNCC: 3 | RNVC: 2
AT-609-1008: RNCC: 5 | RNVC: 2
MAC229614: RNCC: 5 | RNVC: 2

29 Sep 1994

5340-01-389-9415
Angle Bracket

013899415
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-386: RNCC: 3 | RNVC: 2
MS9600-386: RNCC: 5 | RNVC: 9

22 Jan 1982

5340-01-362-6492
Loop Clamp

013626492
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-8S: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-00-209-7503
Butt Hinge

002097503
1838: RNCC: 3 | RNVC: 9
ANSI A156.1 A8133: RNCC: 5 | RNVC: 2
7286: RNCC: C | RNVC: 1
840: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-157-7595
Mortise Lock Set

001577595
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F76A GRADE 2: RNCC: 3 | RNVC: 2
ANSI A156.2 FUNCTION F76 GRADE 2: RNCC: 5 | RNVC: 9

31 Mar 1971

5340-00-050-3081
Butt Hinge

000503081
BHMA-A156.1: RNCC: 3 | RNVC: 1
BHMA-A156.1 A8173 3IN: RNCC: 3 | RNVC: 2
FFH116CTYPE2171H: RNCC: 5 | RNVC: 9
ANSI A156.1 A8173: RNCC: 5 | RNVC: 9
ANSI A156.1 A8333: RNCC: 5 | RNVC: 9
FF-H-116E TYPE 2171H: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-050-9154
Spring Tension Clip

000509154
NASM24066/3: RNCC: 3 | RNVC: 1
M24066/3-003: RNCC: 3 | RNVC: 2
M24066/3-003: RNCC: 5 | RNVC: 9
MILC24066: RNCC: 5 | RNVC: 9
M24066-3-003: RNCC: C | RNVC: 1

16 May 1967

5340-00-188-0329
Turnbuckle

001880329
FFT791-TY1-FM1-CL7-5/16X4 1/2: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1
ASTM F1145 TY1 FM1 CL7: RNCC: 5 | RNVC: 1
5/16X4 1/2 TYPE 1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-349-9928
Loop Clamp

013499928
09A067WD15NB: RNCC: 1 | RNVC: 2
TA025035WDC15NL: RNCC: 3 | RNVC: 2
TA02503WDC15NL: RNCC: 3 | RNVC: 9
TA025035WDC15NB: RNCC: 5 | RNVC: 9
09A067WD15AF: RNCC: 5 | RNVC: 9
JM44LC33WD15YN: RNCC: 5 | RNVC: 9
09A067WD15NB: RNCC: 5 | RNVC: 9
830WD15AF: RNCC: 5 | RNVC: 9
JM44LC33WDC15NL: RNCC: 5 | RNVC: 9
830WD15NL: RNCC: 5 | RNVC: 9

7 Dec 1991

5340-01-371-8612
Webbing Strap

013718612
2442: RNCC: 3 | RNVC: 2
12412442: RNCC: 5 | RNVC: 2
12412442: RNCC: 5 | RNVC: 2
12412442: RNCC: 5 | RNVC: 2
12412442: RNCC: 7 | RNVC: 2

25 Feb 1993

5340-00-240-2316
Barrel Bolt

002402316
FFH111-F1011C 5IN: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH00111TYPEF1011C: RNCC: 5 | RNVC: 9
SC1078K-5 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-240-2339
Shelf Bracket

002402339
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 B04041 8X10: RNCC: 3 | RNVC: 2
A156.16 TYPE B04041 8X10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-240-2592
Tee Hinge

002402592
MS27970-26: RNCC: 2 | RNVC: 2
928: RNCC: 5 | RNVC: 1
BHMA-A156.20: RNCC: 5 | RNVC: 1
FFH116: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-240-2601
Tee Hinge

002402601
MS27970-24: RNCC: 2 | RNVC: 2
A156.20A82221: RNCC: 5 | RNVC: 1
BHMA-A156.20: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-220-5006
Electrical-Mechanical Equipment Post

012205006
NAS1830: RNCC: 3 | RNVC: 1
NAS1830B01B08: RNCC: 3 | RNVC: 2
117449-13: RNCC: C | RNVC: 1
2188-13: RNCC: C | RNVC: 1
350-2188-13-07: RNCC: C | RNVC: 1

14 Nov 1985

5340-01-323-5612
Angle Bracket

013235612
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-219: RNCC: 3 | RNVC: 2
AS9601-219: RNCC: 3 | RNVC: 9
AS9601-219: RNCC: 5 | RNVC: 9
MS9601-219: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-01-323-5610
Angle Bracket

013235610
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-018: RNCC: 3 | RNVC: 2
MS9601-018: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-01-330-5448
Loop Clamp

013305448
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C2KH: RNCC: 3 | RNVC: 2
MS9350-01: RNCC: 5 | RNVC: 9

5 Dec 1990

5340-01-342-3159
Loop Clamp

013423159
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R5DB: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-00-096-5716
Access Cover

000965716
318541: RNCC: 3 | RNVC: 2
1107C29: RNCC: 5 | RNVC: 2
11EHT171: RNCC: 5 | RNVC: 2
1107C29: RNCC: 5 | RNVC: 2
9N0514: RNCC: 5 | RNVC: 9
11A5137: RNCC: 5 | RNVC: 9
11ET171: RNCC: 5 | RNVC: 9
1107C29: RNCC: 5 | RNVC: 9
290-1107C2: RNCC: 5 | RNVC: 9
41904: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-277-1224
Spacing Threaded Standoff

012771224
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-6E10: RNCC: 3 | RNVC: 2

18 Apr 1988

5340-01-277-5066
Loop Clamp

012775066
1521: RNCC: 3 | RNVC: 2
12421261: RNCC: 7 | RNVC: 2

22 Apr 1988

5340-01-446-2148
Spacing Threaded Standoff

014462148
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6J25: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-01-283-0569
Webbing Strap

012830569
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R20KK10: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-01-296-9816
Electrical-Mechanical Equipment Post

012969816
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E60: RNCC: 3 | RNVC: 2
NAS1786C3-60: RNCC: C | RNVC: 1

26 Mar 1989

5340-01-283-2529
Angle Bracket

012832529
M85052/4-1416: RNCC: 2 | RNVC: 2
MIL-DTL-85052/4: RNCC: 4 | RNVC: 1
MIL-C-85052/4: RNCC: 5 | RNVC: 9

1 Aug 1988

5340-01-303-0003
Electrical-Mechanical Equipment Post

013030003
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5C16: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-01-256-5367
Bow Handle

012565367
NASM39087: RNCC: 3 | RNVC: 1
MS39087-304CP: RNCC: 3 | RNVC: 2
MS39087-304CP: RNCC: 5 | RNVC: 9
MS39087-103CP: RNCC: 5 | RNVC: 9

5 Jun 1987

5340-01-268-5874
Mending Plate

012685874
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-007: RNCC: 3 | RNVC: 2
9682013403: RNCC: 5 | RNVC: 2
MS9552-007: RNCC: 5 | RNVC: 9
968.20.13.403: RNCC: 5 | RNVC: 9
5340PL1559635: RNCC: 6 | RNVC: 9

3 Dec 1987

5340-01-283-9287
Electrical-Mechanical Equipment Post

012839287
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5C12: RNCC: 3 | RNVC: 2
A-4010-632-1: RNCC: 5 | RNVC: 2
2175-632-A-21: RNCC: 5 | RNVC: 9
8397-A-0632-1A: RNCC: 5 | RNVC: 9
8397-A-0632-1A: RNCC: C | RNVC: 1

15 Aug 1988

5340-01-272-1471
Loop Clamp

012721471
AA52406-37: RNCC: 2 | RNVC: 2
A-A-52406: RNCC: 4 | RNVC: 1
MS52150-37HE: RNCC: 5 | RNVC: 9

4 Feb 1988

5340-01-284-0618
Electrical-Mechanical Equipment Post

012840618
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6J16: RNCC: 3 | RNVC: 2
9758SS1032: RNCC: C | RNVC: 1

18 Aug 1988

5340-01-284-0619
Electrical-Mechanical Equipment Post

012840619
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3A04: RNCC: 3 | RNVC: 2
13084869: RNCC: 5 | RNVC: 2
13084869: RNCC: 5 | RNVC: 9

18 Aug 1988

5340-01-298-1366
Retaining Strap

012981366
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C8-14S: RNCC: 3 | RNVC: 2
NAS1677C8-14N: RNCC: 5 | RNVC: 9

12 Apr 1989

5340-01-259-6118
Dust And Moisture Seal Protective Plug

012596118
NAS836: RNCC: 3 | RNVC: 1
NAS836N4A: RNCC: 3 | RNVC: 2
M5501/1-4G: RNCC: 5 | RNVC: 9
MIL-C-5501/1: RNCC: 5 | RNVC: 9

19 Jul 1987

5340-01-446-4209
Spacing Threaded Standoff

014464209
NAS1829: RNCC: 3 | RNVC: 1
NAS1829H6G16: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-01-446-4535
Quick Release Plunger

014464535
53-1068-16: RNCC: 3 | RNVC: 1
6962ED2108PC19: RNCC: 5 | RNVC: 1
6962ED1956PC13: RNCC: 5 | RNVC: 1
6962ED3230PC24: RNCC: 5 | RNVC: 1
6967ED516PC15: RNCC: 5 | RNVC: 1
6967ED516PC15: RNCC: 5 | RNVC: 1
6962ED3230PC24: RNCC: 5 | RNVC: 1
MC-061935-ITEM NO-14: RNCC: 5 | RNVC: 2
6962ED1955PC14: RNCC: D | RNVC: 9

3 Jul 1997

5340-01-006-2225
Spring Tension Clip

010062225
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-026-05C: RNCC: 3 | RNVC: 2
6003-72C: RNCC: 5 | RNVC: 2
6003-72C: RNCC: 5 | RNVC: 9

15 Jul 1975

5340-01-710-9936
Mounting Bracket

017109936
3363513-7: RNCC: 3 | RNVC: 2
3363513: RNCC: D | RNVC: 9

13 Jul 2023

5340-01-711-0111
Mounting Plate

017110111
8668086-006: RNCC: 3 | RNVC: 2
133-8668086: RNCC: D | RNVC: 9

14 Jul 2023

5340-01-307-9448
Grooved Clamp Coupling Ferrule

013079448
2710-250F: RNCC: 3 | RNVC: 2
16830-250: RNCC: 5 | RNVC: 2
NK102347-0250: RNCC: 5 | RNVC: 2
9850-7: RNCC: 5 | RNVC: 2
2509972-252: RNCC: 5 | RNVC: 2
2710-250F: RNCC: 5 | RNVC: 2
NK102347-0250: RNCC: 5 | RNVC: 2
2919AB250: RNCC: 5 | RNVC: 2
ST7M277L250F: RNCC: 5 | RNVC: 9
STM277L250F: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-01-246-9245
Angle Bracket

012469245
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-016: RNCC: 3 | RNVC: 2
MS9593-016: RNCC: 5 | RNVC: 9

22 Dec 1986

5340-01-253-7563
Access Cover

012537563
16B4512-14: RNCC: 3 | RNVC: 2
5340PL1998471: RNCC: 6 | RNVC: 9

24 Apr 1987

5340-01-013-3905
Retaining Strap

010133905
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10-18N: RNCC: 3 | RNVC: 2

2 Dec 1975

5340-01-421-7565
Bow Handle

014217565
NASM39087: RNCC: 3 | RNVC: 1
MS39087-401AN: RNCC: 3 | RNVC: 2
MS39087-401AN: RNCC: 5 | RNVC: 9

15 Nov 1995

5340-01-211-6234
Bow Handle

012116234
NASM39087: RNCC: 3 | RNVC: 1
MS39087-205CP: RNCC: 3 | RNVC: 2
MS39087-205CP: RNCC: 5 | RNVC: 9

28 Jun 1985

5340-01-226-8078
Dust And Moisture Seal Boot

012268078
12010293: RNCC: 3 | RNVC: 9
12010293: RNCC: 5 | RNVC: 1
PAC 15324980 B: RNCC: 5 | RNVC: 2
23-12497-000: RNCC: 5 | RNVC: 9
PAC 12010293 B: RNCC: 5 | RNVC: 9
12010293: RNCC: 5 | RNVC: 9
1624140: RNCC: 5 | RNVC: 9
1624140: RNCC: 7 | RNVC: 2

22 Feb 1986

5340-01-231-8552
Electrical-Mechanical Equipment Post

012318552
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C16: RNCC: 3 | RNVC: 2
8220-SS-0632: RNCC: 5 | RNVC: 2
11437857-006: RNCC: 5 | RNVC: 2
8220-SS-0632: RNCC: 5 | RNVC: 9
74397-10: RNCC: C | RNVC: 1
8220-SS-0632-7: RNCC: C | RNVC: 1
JCM-15425-073: RNCC: C | RNVC: 1
952876-1: RNCC: E | RNVC: 8
10049909-1: RNCC: E | RNVC: 8

6 May 1986

5340-01-234-9570
Spring Tension Clip

012349570
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-018-08C: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-01-248-2878
Electrical-Mechanical Equipment Post

012482878
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6E28: RNCC: 3 | RNVC: 2
540-9744-003: RNCC: 5 | RNVC: 9
210-1004P45: RNCC: C | RNVC: 1
8470: RNCC: C | RNVC: 1

21 Jan 1987

5340-01-243-2679
Electrical-Mechanical Equipment Post

012432679
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B3A05: RNCC: 3 | RNVC: 2

24 Oct 1986

5340-01-240-0983
Electrical-Mechanical Equipment Post

012400983
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B11: RNCC: 3 | RNVC: 2

8 Sep 1986

5340-01-224-6926
Butt Hinge

012246926
AA55595-14DF: RNCC: 2 | RNVC: 2
A-A-55595: RNCC: 4 | RNVC: 1
MS35830-14DF: RNCC: 5 | RNVC: 9

20 Jan 1986

5340-01-211-0837
Retaining Strap

012110837
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C16-24N: RNCC: 3 | RNVC: 2
10112971: RNCC: 6 | RNVC: 9

20 Jun 1985

5340-01-224-8465
Butt Hinge

012248465
MS35829-17A: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1

23 Jan 1986

5340-01-229-7753
Electrical-Mechanical Equipment Post

012297753
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E28: RNCC: 3 | RNVC: 2

6 Apr 1986

5340-01-220-0349
Electrical-Mechanical Equipment Post

012200349
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D40: RNCC: 3 | RNVC: 2
8416-SS-0832: RNCC: C | RNVC: 1

6 Nov 1985

5340-01-242-1028
Electrical-Mechanical Equipment Post

012421028
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E06: RNCC: 3 | RNVC: 2
9738990632-7: RNCC: C | RNVC: 1
MF101CH06.375: RNCC: C | RNVC: 1
9738990632-7: RNCC: C | RNVC: 1
7907821-12: RNCC: C | RNVC: 1
A3028250-2: RNCC: C | RNVC: 1

7 Oct 1986

5340-01-215-0037
Dust And Moisture Seal Protective Cap

012150037
NAS847: RNCC: 3 | RNVC: 1
NAS844-17: RNCC: 3 | RNVC: 2
NAS844-17: RNCC: 5 | RNVC: 9
MIL-C-5501/9: RNCC: 5 | RNVC: 9
M5501/9-F17: RNCC: 5 | RNVC: 9

19 Aug 1985

5340-01-225-6038
Electrical-Mechanical Equipment Post

012256038
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D16: RNCC: 3 | RNVC: 2
P260M09F07: RNCC: C | RNVC: 1
2680133-329: RNCC: C | RNVC: 1
8399SS0832: RNCC: C | RNVC: 1

5 Feb 1986

5340-01-239-0700
Antipilferage Seal

012390700
POLYLOCK-GREEN: RNCC: 3 | RNVC: 1
77179: RNCC: 3 | RNVC: 2
35580: RNCC: 5 | RNVC: 9
POLY-LOK GREEN: RNCC: E | RNVC: 8

25 Aug 1986

5340-01-220-5009
Electrical-Mechanical Equipment Post

012205009
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C13: RNCC: 3 | RNVC: 2
1120-R-A-0.812-23: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-00-819-7855
Casement Fastener

008197855
FFH111-F1140: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
03051: RNCC: 5 | RNVC: 9
C-83051-3: RNCC: 5 | RNVC: 9
FFH111TYPEF1140: RNCC: 5 | RNVC: 9
EA1829: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-444-2457
Spacing Threaded Standoff

014442457
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B34: RNCC: 3 | RNVC: 2

1 May 1997

5340-01-218-7336
Electrical-Mechanical Equipment Post

012187336
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C11: RNCC: 3 | RNVC: 2
8217-44SS0632-7: RNCC: E | RNVC: 8
514-16933-000: RNCC: E | RNVC: 8

18 Oct 1985

5340-01-223-7961
Spacing Threaded Standoff

012237961
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E12: RNCC: 3 | RNVC: 2
9741-SS-0632: RNCC: C | RNVC: 1
9741-SS-0632-7: RNCC: C | RNVC: 1

6 Jan 1986

5340-01-207-1747
Angle Bracket

012071747
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-082: RNCC: 3 | RNVC: 2
MS9593-082: RNCC: 5 | RNVC: 9

28 Apr 1985

5340-01-443-3727
Loop Clamp

014433727
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C18-20S: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-01-316-3564
Expansion Plug

013163564
JGU696: RNCC: 3 | RNVC: 1
41N22-2PC25: RNCC: 5 | RNVC: 1
41N22-3PC25: RNCC: 5 | RNVC: 1
41N22-3 PC25: RNCC: 5 | RNVC: 1
JGU696: RNCC: 5 | RNVC: 1
11352PC81: RNCC: 5 | RNVC: 1
41N23-1 PC9: RNCC: 5 | RNVC: 1
41N23PC9: RNCC: 5 | RNVC: 1
11352PC81: RNCC: 5 | RNVC: 1
41N23-2PC9: RNCC: 5 | RNVC: 1

8 Mar 1990

5340-01-424-2459
Spacing Threaded Standoff

014242459
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D09: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-01-185-4902
Bow Handle

011854902
NASM39087: RNCC: 3 | RNVC: 1
MS39087-410CB: RNCC: 3 | RNVC: 2
MS39087-204CB: RNCC: 5 | RNVC: 9
MS39087-410CB: RNCC: 5 | RNVC: 9

29 Jul 1984

5340-01-189-7556
Angle Bracket

011897556
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-027: RNCC: 3 | RNVC: 2
MS9592-027: RNCC: 5 | RNVC: 9
5340PL1674421: RNCC: 6 | RNVC: 9

20 Sep 1984

5340-01-190-4113
Angle Bracket

011904113
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-007: RNCC: 3 | RNVC: 2
MS9600-007: RNCC: 5 | RNVC: 9

27 Sep 1984

5340-01-192-0930
Loop Clamp

011920930
M85052/1-23: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA26000123NB: RNCC: 5 | RNVC: 1
S664NB23: RNCC: 5 | RNVC: 1
JM44LC70WPH23YN: RNCC: 5 | RNVC: 1
1444PHW23Y: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
9M972-23N: RNCC: C | RNVC: 1

16 Oct 1984

5340-01-194-0869
Electrical-Mechanical Equipment Post

011940869
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C32: RNCC: 3 | RNVC: 2
4164650-21: RNCC: 5 | RNVC: 2
NAS1786-06-32: RNCC: 5 | RNVC: 9

9 Nov 1984

5340-01-201-2475
Electrical-Mechanical Equipment Post

012012475
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B40: RNCC: 3 | RNVC: 2
NAS1786A04-40: RNCC: 5 | RNVC: 9

14 Feb 1985

5340-01-206-0130
Angle Bracket

012060130
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-610: RNCC: 3 | RNVC: 2
MS9593-610: RNCC: 5 | RNVC: 9

12 Apr 1985

5340-01-222-4409
Angle Bracket

012224409
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-049: RNCC: 3 | RNVC: 2
MS9600-049: RNCC: 5 | RNVC: 9

12 Dec 1985

5340-00-119-4702
Loop Clamp

001194702
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D2NH: RNCC: 3 | RNVC: 2
MS9352-01: RNCC: 5 | RNVC: 9

23 Oct 1968

5340-01-497-8118
Loop Clamp

014978118
NASM21322: RNCC: 3 | RNVC: 1
MS21322-51: RNCC: 3 | RNVC: 2
MS21322-51: RNCC: 5 | RNVC: 9

5 Jun 2002

5340-01-710-4993
Synchro Clamp

017104993
VC1443A-150-Z: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-710-5652
Threaded Standoff Assembly

017105652
470Y143-1: RNCC: 3 | RNVC: 2

7 Jun 2023

5340-01-710-6844
Cushioning Pad

017106844
12242-2019-06: RNCC: 3 | RNVC: 2
12242-2019: RNCC: D | RNVC: 9

15 Jun 2023

5340-01-327-3590
Access Cover

013273590
P/N 400-91132: RNCC: 3 | RNVC: 2
410-92663: RNCC: 5 | RNVC: 9

12 Oct 1990

5340-01-491-1467
Plug Button

014911467
NAS451: RNCC: 3 | RNVC: 1
NAS451-46: RNCC: 3 | RNVC: 2
NAS-451-46: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-01-441-4565
Butt Hinge Leaf

014414565
MS20001HA6-1640: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

13 Feb 1997

5340-01-183-0977
Dust And Moisture Seal Protective Cap-Plug

011830977
NAS834: RNCC: 3 | RNVC: 1
NAS834-206: RNCC: 3 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F39: RNCC: 5 | RNVC: 9

2 Jul 1984

5340-01-197-5072
Snap Hook

011975072
PIA-H-7195: RNCC: 3 | RNVC: 1
PS22042-2: RNCC: 3 | RNVC: 2
MS22042-2: RNCC: 5 | RNVC: 9

21 Dec 1984

5340-01-199-9680
Retaining Strap

011999680
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D13W24S: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-01-453-2388
Loop Clamp

014532388
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P2EB: RNCC: 3 | RNVC: 2
NAS1397-2B: RNCC: 5 | RNVC: 9

24 Feb 1998

5340-01-468-6698
Safety Cable Kit

014686698
SAE-AS3509: RNCC: 3 | RNVC: 1
AS3509-0209K: RNCC: 3 | RNVC: 2
AS3509-0209K: RNCC: 3 | RNVC: 9

19 Oct 1999

5340-01-582-0424
Loop Clamp

015820424
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C16KW: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-00-473-5962
Key Blank

004735962
01122AR: RNCC: 3 | RNVC: 2
9279A: RNCC: 5 | RNVC: 2
U122AR: RNCC: 5 | RNVC: 2
Y14: RNCC: 5 | RNVC: 2
YJ2: RNCC: 5 | RNVC: 2
R07NX: RNCC: 5 | RNVC: 9
2601PG: RNCC: 5 | RNVC: 9
0122AR: RNCC: 5 | RNVC: 9
Y14: RNCC: 5 | RNVC: 9
6SS: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-338-4392
Loop Clamp

013384392
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC9: RNCC: 3 | RNVC: 2
AN735DC9: RNCC: 5 | RNVC: 9

3 May 1991

5340-01-070-3221
Access Cover

010703221
12012131: RNCC: 3 | RNVC: 2
5340-01-070-3221: RNCC: 6 | RNVC: 9

10 Jan 1979

5340-01-623-9982
Access Cover

016239982
19224A051: RNCC: 3 | RNVC: 2
19224A041: RNCC: 3 | RNVC: 2
13041474: RNCC: 7 | RNVC: 2

11 Dec 2013

5340-01-082-1640
Pipe Hanger

010821640
11652706: RNCC: 3 | RNVC: 2
11652706: RNCC: 5 | RNVC: 9
11652706: RNCC: 5 | RNVC: 9
5340010821640: RNCC: 6 | RNVC: 9

27 Aug 1979

5340-01-556-0731
Loop Clamp

015560731
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D9-18T NON-ASBESTOS: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-01-434-4280
Loop Clamp

014344280
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-17N: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-00-190-6798
Retaining Strap

001906798
NASM21314: RNCC: 3 | RNVC: 1
MS21314-1: RNCC: 3 | RNVC: 2
MS21314-1: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-160-4122
Retaining Strap

011604122
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-14N: RNCC: 3 | RNVC: 2

21 Aug 1983

5340-00-915-4819
Spring Tension Clip

009154819
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-032-02C: RNCC: 3 | RNVC: 2
6009-204C: RNCC: 5 | RNVC: 2
6009-204C: RNCC: 5 | RNVC: 9

13 Jul 1966

5340-00-060-9486
Tie Down St Fitting

000609486
NAS1211: RNCC: 3 | RNVC: 1
NAS1211D20: RNCC: 3 | RNVC: 2
WB450: RNCC: 5 | RNVC: 9

13 Jun 1967

5340-01-710-7052
Dust And Moisture Seal Protective Cap-Plug

017107052
001-000297-000: RNCC: 3 | RNVC: 2

20 Jun 2023

5340-01-710-8102
Access Door Hinge

017108102
68A331056-2059: RNCC: 3 | RNVC: 2

27 Jun 2023

5340-01-710-8365
Spring Tension Clip

017108365
PMLN8082: RNCC: 3 | RNVC: 2

28 Jun 2023

5340-01-626-0675
Loop Clamp

016260675
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D38: RNCC: 3 | RNVC: 2
AS5587D38: RNCC: 3 | RNVC: 9

25 Feb 2014

5340-01-291-4637
Retaining Strap

012914637
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C19-52N: RNCC: 3 | RNVC: 2
10086886: RNCC: 6 | RNVC: 9

28 Dec 1988

5340-01-710-9532
Multiple Angle Bracket

017109532
1705335A: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-710-8675
Engine Accessory Bracket

017108675
4320296: RNCC: 3 | RNVC: 2

4 Jul 2023

5340-01-710-8942
Mounting Bracket

017108942
141N4826-5: RNCC: 3 | RNVC: 2

6 Jul 2023

5340-01-710-7980
Dust And Moisture Seal Protective Cap-Plug

017107980
660-024NF15H7-109: RNCC: 3 | RNVC: 2

26 Jun 2023

5340-01-710-9080
Retaining Clip

017109080
IMR3: RNCC: 3 | RNVC: 2

7 Jul 2023

5340-01-710-9578
Mechanic Equipment Hardware Kit

017109578
010-12982-01: RNCC: 3 | RNVC: 2
010-12982-01: RNCC: 5 | RNVC: 2

11 Jul 2023

5340-01-298-0196
Angle Bracket

012980196
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-055: RNCC: 3 | RNVC: 2
MS9592-055: RNCC: 5 | RNVC: 9

9 Apr 1989

5340-01-312-2618
Webbing Strap

013122618
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R15CJ84: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-01-711-0498
Locking Block

017110498
LS1126151: RNCC: 3 | RNVC: 2

17 Jul 2023

5340-01-710-8411
Electronic Equipment Hardware Kit

017108411
13076720: RNCC: 3 | RNVC: 2

29 Jun 2023

5340-01-698-9887
Mounting Bracket

016989887
5502-431: RNCC: 3 | RNVC: 2
T94A01D: RNCC: 5 | RNVC: 9

28 Dec 2021

5340-01-699-3386
Mounting Bracket

016993386
470W191-1: RNCC: 3 | RNVC: 2
470W191: RNCC: D | RNVC: 9

25 Jan 2022

5340-01-708-2255
Block Clamp

017082255
7-611830031-101: RNCC: 3 | RNVC: 2

23 Mar 2023

5340-01-708-3492
Catch Strike

017083492
141T3111-16: RNCC: 3 | RNVC: 1

31 Mar 2023

5340-01-708-3998
Dust And Moisture Seal Protective Cap

017083998
290143: RNCC: 3 | RNVC: 2

4 Apr 2023

5340-01-708-6514
Loop Clamp

017086514
366E740-11: RNCC: 3 | RNVC: 2

14 Apr 2023

5340-01-064-5638
Loop Clamp

010645638
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C13-7N: RNCC: 3 | RNVC: 2
TA519SS13-7: RNCC: C | RNVC: 1

26 Aug 1978

5340-01-120-7315
Plug Button

011207315
2643: RNCC: 3 | RNVC: 2
DP-500: RNCC: 5 | RNVC: 1
12339361-1: RNCC: 5 | RNVC: 2
12339361-1: RNCC: 5 | RNVC: 2
59282AX: RNCC: 5 | RNVC: 2
308-0312-020: RNCC: 5 | RNVC: 2
STD 824-8: RNCC: 5 | RNVC: 2
2643: RNCC: 5 | RNVC: 2
2643DP-500BLACK: RNCC: 5 | RNVC: 2
26510-05-5-238: RNCC: 5 | RNVC: 2

22 Oct 1981

5340-01-129-7016
Loop Clamp

011297016
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D11-20N: RNCC: 3 | RNVC: 2
10112544: RNCC: 6 | RNVC: 9

9 Apr 1982

5340-01-159-1323
Loop Clamp

011591323
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D18NH: RNCC: 3 | RNVC: 2
MS9352-17: RNCC: 5 | RNVC: 9

3 Aug 1983

5340-01-119-2332
Clamp Bolt Assembly

011192332
M85731/1-7A: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-7A: RNCC: 5 | RNVC: 9

19 Sep 1981

5340-01-160-0398
Loop Clamp

011600398
MS21919WCJ8: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AS21919WCJ08: RNCC: 5 | RNVC: 1
AS21919WCJ08: RNCC: 5 | RNVC: 2
9463105608: RNCC: 5 | RNVC: 2
MS21919WCJ8: RNCC: 5 | RNVC: 2
AS21919WCJ08: RNCC: 5 | RNVC: 9
MS21105-8: RNCC: 5 | RNVC: 9
5340PL0846372: RNCC: 6 | RNVC: 9
10370369: RNCC: 6 | RNVC: 9

17 Aug 1983

5340-01-145-8480
Retaining Strap

011458480
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D20-32N: RNCC: 3 | RNVC: 2
10086821: RNCC: 6 | RNVC: 9

20 Jan 1983

5340-01-135-1030
Loop Clamp

011351030
620-028: RNCC: 3 | RNVC: 2
306BX20: RNCC: 5 | RNVC: 2
28KS3: RNCC: 5 | RNVC: 9
28H: RNCC: 5 | RNVC: 9
306BX20: RNCC: 5 | RNVC: 9
5340011351030: RNCC: 6 | RNVC: 9
306BX20: RNCC: 7 | RNVC: 9

18 Jul 1982

5340-01-160-0444
Retaining Strap

011600444
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D20-36N: RNCC: 3 | RNVC: 2
10112824: RNCC: 6 | RNVC: 9

17 Aug 1983

5340-01-698-9256
Electronic Equipment Hardware Kit

016989256
4538649: RNCC: 3 | RNVC: 2
4538649-EDFP: RNCC: D | RNVC: 9

21 Dec 2021

5340-00-910-7180
Spring Tension Clip

009107180
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B036-06P: RNCC: 3 | RNVC: 2

13 Jul 1966

5340-01-130-9348
Bow Handle

011309348
NASM39087: RNCC: 3 | RNVC: 1
MS39087-308CB: RNCC: 3 | RNVC: 2
MS39087-308CB: RNCC: 5 | RNVC: 9
MS39087-105CB: RNCC: 5 | RNVC: 9

30 Apr 1982

5340-01-103-0272
Loop Clamp

011030272
M85052/3-3: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026-0001-03HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10117633: RNCC: 6 | RNVC: 9

1 Nov 1980

5340-01-102-4624
Access Cover

011024624
12268886: RNCC: 3 | RNVC: 2
5340PL0883393: RNCC: 6 | RNVC: 9
5340011024624: RNCC: 6 | RNVC: 9

22 Oct 1980

5340-00-020-6452
Bow Handle

000206452
B4008242: RNCC: 3 | RNVC: 2
4477US28: RNCC: 5 | RNVC: 9
4477ALD: RNCC: 5 | RNVC: 9
345840: RNCC: 5 | RNVC: 9
4477US28: RNCC: C | RNVC: 1
4477(US28): RNCC: C | RNVC: 1

1 Jan 1963

5340-01-708-6902
Mounting Bracket

017086902
6656453-1: RNCC: 3 | RNVC: 2
6656453: RNCC: D | RNVC: 9

17 Apr 2023

5340-01-708-8465
Flush Catch

017088465
5014578-01: RNCC: 3 | RNVC: 2

27 Apr 2023

5340-01-058-8827
Spring Tension Clip

010588827
1133030G1: RNCC: 3 | RNVC: 9
1133030: RNCC: 5 | RNVC: 2
6015-27CT: RNCC: 5 | RNVC: 2
1133030G1: RNCC: 5 | RNVC: 2
1133030: RNCC: 5 | RNVC: 2
1133030: RNCC: 5 | RNVC: 2
1133030: RNCC: 5 | RNVC: 2
6015-27CT: RNCC: 5 | RNVC: 9
G167957: RNCC: 5 | RNVC: 9
11464623: RNCC: 5 | RNVC: 9

2 Apr 1978

5340-01-054-0069
Butt Hinge

010540069
AA55594-18D: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-18D: RNCC: 5 | RNVC: 9
MS35829-18D: RNCC: 5 | RNVC: 9

13 Jan 1978

5340-01-054-4943
Butt Hinge

010544943
AA55590-10C: RNCC: 2 | RNVC: 2
A-A-55590-10C: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-10C: RNCC: 5 | RNVC: 9
MS35822-10C: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-01-059-2450
Loop Clamp

010592450
AN742D2: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MS21103D2: RNCC: 5 | RNVC: 9
5340PL0846610: RNCC: 6 | RNVC: 9
5340PL1820270: RNCC: 6 | RNVC: 9

8 Apr 1978

5340-01-083-6694
Loop Clamp

010836694
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D9NH: RNCC: 3 | RNVC: 2
MS9352-08: RNCC: 5 | RNVC: 9

28 Sep 1979

5340-01-090-8777
Retaining Clip

010908777
2606758: RNCC: 3 | RNVC: 2
2606758: RNCC: 3 | RNVC: 9
59000725-001: RNCC: 5 | RNVC: 2

26 Feb 1980

5340-01-099-1438
Retaining Strap

010991438
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C10-20N: RNCC: 3 | RNVC: 2

13 Aug 1980

5340-01-142-9990
Loop Clamp

011429990
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D11-19T: RNCC: 3 | RNVC: 2

24 Nov 1982

5340-01-123-1553
Loop Clamp

011231553
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C26KWX: RNCC: 3 | RNVC: 2
MS21122C26: RNCC: 5 | RNVC: 9

6 Dec 1981

5340-01-112-6397
Loop Clamp

011126397
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D3NH: RNCC: 3 | RNVC: 2
MS9352-02: RNCC: 5 | RNVC: 9

7 May 1981

5340-01-698-6781
Dust And Moisture Seal Protective Cap

016986781
VRF-040X250-8 RED: RNCC: 3 | RNVC: 2
50783: RNCC: 5 | RNVC: 2

2 Dec 2021

5340-01-081-6449
Expansion Shield

010816449
AA1923-415: RNCC: 2 | RNVC: 2
A-A-1923: RNCC: 4 | RNVC: 1
FF-S-325: RNCC: 5 | RNVC: 9
101648: RNCC: 5 | RNVC: 9
3460: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-01-090-0253
Loop Clamp

010900253
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C18KWX: RNCC: 3 | RNVC: 2
MS21122C18: RNCC: 5 | RNVC: 9
MS21122-C18: RNCC: C | RNVC: 1

10 Feb 1980

5340-00-209-7485
Butt Hinge

002097485
BHMA-A156.1: RNCC: 3 | RNVC: 1
BHMA-A156.1 A8112 2IN: RNCC: 3 | RNVC: 2
A156.1-A8112: RNCC: 5 | RNVC: 9
FFH116BAMEND2TYPE2027: RNCC: 5 | RNVC: 9
FFH116CTYPE2170: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-424-9645
Loop Clamp

004249645
SAE-AS9354: RNCC: 3 | RNVC: 1
MS9354-03: RNCC: 3 | RNVC: 2
MS9354-03: RNCC: 5 | RNVC: 9

16 Apr 1971

5340-01-701-1408
Snap Hook

017011408
8827910: RNCC: 3 | RNVC: 2
8827910 REV -: RNCC: D | RNVC: 9

28 Apr 2022

5340-00-136-2766
Headless Straight Rod

001362766
AA55592-17C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS27990-4C: RNCC: C | RNVC: 1

22 Jan 1969

5340-01-710-6968
Mounting Bracket

017106968
100021674: RNCC: 3 | RNVC: 2

16 Jun 2023

5340-01-013-7424
Loop Clamp

010137424
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCJ03: RNCC: 3 | RNVC: 2
AS21919WCJ03: RNCC: 3 | RNVC: 9
AS21919WCJ03: RNCC: 5 | RNVC: 2
AS21919WCJ03: RNCC: 5 | RNVC: 2
M23190/2-3B: RNCC: 5 | RNVC: 9
MS21105W3: RNCC: 5 | RNVC: 9
MS21105-3: RNCC: 5 | RNVC: 9
MS21919WCJ3: RNCC: 5 | RNVC: 9
10117537: RNCC: 6 | RNVC: 9

7 Dec 1975

5340-01-049-0911
Loop Clamp

010490911
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-5TW: RNCC: 3 | RNVC: 2
NAS1714D2-5NW: RNCC: C | RNVC: 1

10 Oct 1977

5340-01-064-1899
Loop Clamp

010641899
MS21103-5: RNCC: 2 | RNVC: 2
MS21103: RNCC: 4 | RNVC: 1

18 Aug 1978

5340-01-014-9320
Spring Tension Clip

010149320
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-320: RNCC: 3 | RNVC: 2
M24066/2-320: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-120: RNCC: 5 | RNVC: 9
10117543: RNCC: 6 | RNVC: 9
100-200-5-0: RNCC: C | RNVC: 1
416949-20: RNCC: C | RNVC: 1
5808055: RNCC: C | RNVC: 1

9 Jan 1976

5340-01-065-9686
Expansion Shield

010659686
00286018: RNCC: 3 | RNVC: 2
FF-S-325: RNCC: 4 | RNVC: 1
A-A-1923: RNCC: 4 | RNVC: 1
A-A-1923A: RNCC: 5 | RNVC: 9
WS10090: RNCC: 5 | RNVC: 9

27 Sep 1978

5340-01-007-1683
Angle Bracket

010071683
SAE-AS9595: RNCC: 3 | RNVC: 1
MS9595-098: RNCC: 3 | RNVC: 2
MS9595-098: RNCC: 5 | RNVC: 9

31 Jul 1975

5340-01-050-1025
Loop Clamp

010501025
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D2T: RNCC: 3 | RNVC: 2
TA1718D2X: RNCC: E | RNVC: 8

31 Oct 1977

5340-01-008-7425
Butt Hinge

010087425
MS35824-3A: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1
MS35824-3A: RNCC: 5 | RNVC: 9

29 Aug 1975

5340-01-039-0482
Nut And Bolt Locking Plate

010390482
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K16CP: RNCC: 3 | RNVC: 2

16 Apr 1977

5340-00-951-0348
Spring Tension Clip

009510348
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B034-06C: RNCC: 3 | RNVC: 2
947143-3406: RNCC: 5 | RNVC: 2
947143-3406: RNCC: 5 | RNVC: 9

4 May 1966

5340-00-912-8871
Loop Clamp

009128871
NASM21333: RNCC: 3 | RNVC: 1
NASM21333-43: RNCC: 3 | RNVC: 2
MS21333-43: RNCC: 5 | RNVC: 9
5340009128871: RNCC: 5 | RNVC: 9
MS21333-43: RNCC: 5 | RNVC: 9
5163905: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-953-5253
Spring Tension Clip

009535253
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-024-06C: RNCC: 3 | RNVC: 2
6007-61C: RNCC: 5 | RNVC: 2
6007-61C: RNCC: 5 | RNVC: 9

9 May 1966

5340-00-985-6633
Loop Clamp

009856633
C15109-8: RNCC: 1 | RNVC: 2
16-00608-007: RNCC: 3 | RNVC: 2
APS20-109-1: RNCC: 3 | RNVC: 2
ST310002-2: RNCC: 3 | RNVC: 2
1857794-2: RNCC: 3 | RNVC: 2
NAS1397P2EB: RNCC: 3 | RNVC: 2
NAS1397P2B: RNCC: 5 | RNVC: 1
SM-C-586483-02: RNCC: 5 | RNVC: 2
9147C5001: RNCC: 5 | RNVC: 2
094430-0000: RNCC: 5 | RNVC: 2

1 Jan 1960

5340-01-023-6108
Support Hook

010236108
NAS622: RNCC: 3 | RNVC: 1
NAS622CT1: RNCC: 3 | RNVC: 2

21 Jun 1976

5340-01-021-1096
Mounting Bracket

010211096
SAE-AS9551: RNCC: 3 | RNVC: 1
MS9551-034: RNCC: 3 | RNVC: 2
MS9551-034: RNCC: 5 | RNVC: 9

9 May 1976

5340-01-052-6269
Instrument Mounting Clamp

010526269
NH1004237: RNCC: 3 | RNVC: 2
MBG59233: RNCC: 3 | RNVC: 2
640005: RNCC: 3 | RNVC: 2
64005: RNCC: 3 | RNVC: 2
640001: RNCC: 5 | RNVC: 2
BACC10EL1: RNCC: 5 | RNVC: 9
BACC10EL1A: RNCC: 7 | RNVC: 2

16 Dec 1977

5340-01-032-3974
Loop Clamp

010323974
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D15-24N: RNCC: 3 | RNVC: 2
TA520WD15-24: RNCC: E | RNVC: 8

14 Dec 1976

5340-01-038-6091
Spring Tension Clip

010386091
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-240: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
NASM24066/2-240: RNCC: 5 | RNVC: 9
M24066-2-240: RNCC: 5 | RNVC: 9

9 Apr 1977

5340-01-053-7130
Butt Hinge

010537130
AA55591-6-C: RNCC: 2 | RNVC: 2
A-A-55591: RNCC: 4 | RNVC: 1
MS35823-6C: RNCC: 5 | RNVC: 9
MS35823-6C: RNCC: 5 | RNVC: 9

9 Jan 1978

5340-01-699-5737
Dust And Moisture Seal Protective Cap

016995737
57201P21-B: RNCC: 3 | RNVC: 2
57201P21-B: RNCC: 5 | RNVC: 2

9 Feb 2022

5340-01-010-0133
Loop Clamp

010100133
AN742C3: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

21 Sep 1975

5340-00-920-7782
Loop Clamp

009207782
NASM21333: RNCC: 3 | RNVC: 1
MS21333-54: RNCC: 3 | RNVC: 2
MS21333-54: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-318-6898
Electrical-Mechanical Equipment Post

013186898
NAS1830: RNCC: 3 | RNVC: 1
NAS1830A04C16: RNCC: 3 | RNVC: 2

23 Apr 1990

5340-01-655-7115
Mounting Plate

016557115
284T0890Y6: RNCC: 3 | RNVC: 2
284T0890-6: RNCC: C | RNVC: 1

6 Jun 2016

5340-01-013-0000
Butt Hinge Leaf

010130000
MS20001Y4-1500: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001Y4-1500: RNCC: 5 | RNVC: 9
5664797-101: RNCC: C | RNVC: 1

21 Nov 1975

5340-01-004-0429
Access Cover

010040429
160D180428-3: RNCC: 3 | RNVC: 2
160D180428-1: RNCC: 5 | RNVC: 9
160D180428-1: RNCC: 5 | RNVC: 9

16 May 1975

5340-00-857-4412
Angle Bracket

008574412
MS9166-52: RNCC: 2 | RNVC: 2
MS9166: RNCC: 4 | RNVC: 1

1 Jan 1962

5340-00-857-4414
Angle Bracket

008574414
MS9166-14: RNCC: 2 | RNVC: 2
MS9166: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-004-0735
Loop Clamp

010040735
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-32N: RNCC: 3 | RNVC: 2

16 May 1975

5340-00-857-6175
Electrical-Mechanical Equipment Post

008576175
9724-SS-0440-7: RNCC: 3 | RNVC: 2
163-02-SS-440-E: RNCC: 5 | RNVC: 2
14H3-04-X4C: RNCC: 5 | RNVC: 2
SS-7201-440-12: RNCC: 5 | RNVC: 2
14010-H-SS-.250: RNCC: 5 | RNVC: 2
14010-H-SS-.250-12: RNCC: 5 | RNVC: 2
152-0144-004: RNCC: 5 | RNVC: 2
4501-440-SS-20: RNCC: 5 | RNVC: 2
23206-23203: RNCC: 5 | RNVC: 2
532348-401: RNCC: 5 | RNVC: 2

13 Oct 1967

5340-00-890-4336
Expansion Plug

008904336
SAE-AS9379: RNCC: 3 | RNVC: 1
MS9379-13: RNCC: 3 | RNVC: 2
MS9379-13: RNCC: 5 | RNVC: 9
5340008904336: RNCC: 5 | RNVC: 9

5 May 1972

5340-00-857-6186
Angle Bracket

008576186
MS9166-51: RNCC: 2 | RNVC: 2
MS9166: RNCC: 4 | RNVC: 1

1 Jan 1962

5340-00-935-5986
Fusible Plug

009355986
MS16993-1: RNCC: 2 | RNVC: 2
MS16993: RNCC: 4 | RNVC: 1
1088A14H02: RNCC: 5 | RNVC: 1
A14027: RNCC: 5 | RNVC: 1

6 Mar 1968

5340-00-890-0001
Retaining Strap

008900001
9128792: RNCC: 3 | RNVC: 2
9191921: RNCC: 5 | RNVC: 2
10000892: RNCC: 5 | RNVC: 2
1400-0628: RNCC: 5 | RNVC: 2
9126028: RNCC: 5 | RNVC: 2
10000892: RNCC: 5 | RNVC: 2
9740402-1: RNCC: 5 | RNVC: 2
10000892: RNCC: 5 | RNVC: 2
1400-0628: RNCC: 5 | RNVC: 9
2C1-37X9: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-087-9570
Webbing Strap

000879570
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10J19: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-01-694-5527
Loop Clamp

016945527
NASM21333: RNCC: 3 | RNVC: 1
MS21333-126A: RNCC: 3 | RNVC: 2

8 Apr 2021

5340-01-055-4202
Butt Hinge

010554202
AA55589-10C: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-10C: RNCC: 5 | RNVC: 1
MS35821-10C: RNCC: 5 | RNVC: 1

4 Feb 1978

5340-00-761-1258
Bow Handle

007611258
NASM39087: RNCC: 3 | RNVC: 1
MS39087-6: RNCC: 3 | RNVC: 2
222-045: RNCC: 5 | RNVC: 2
MS39087-6: RNCC: 5 | RNVC: 9
415-1264-01-1200: RNCC: 5 | RNVC: 9
6624-3: RNCC: C | RNVC: 1
367-0093-00: RNCC: C | RNVC: 1
MS39087-5: RNCC: C | RNVC: 1
1015: RNCC: E | RNVC: 8
8105402: RNCC: E | RNVC: 8

1 Jan 1960

5340-00-804-1244
Dust And Moisture Seal Protective Plug

008041244
NAS847: RNCC: 3 | RNVC: 1
NAS842-10A: RNCC: 3 | RNVC: 2
M5501/2-10: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE10: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-804-1254
Dust And Moisture Seal Protective Plug

008041254
NAS836: RNCC: 3 | RNVC: 1
NAS836-32A: RNCC: 3 | RNVC: 2
M5501/1-32: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSASIZE32: RNCC: 5 | RNVC: 9
NAS836-32A: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-827-9918
Angle Bracket

008279918
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743BC12: RNCC: 3 | RNVC: 2
AN743BC12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-836-0225
Nut And Bolt Retainer

008360225
NAS578: RNCC: 3 | RNVC: 1
NAS578-14A: RNCC: 3 | RNVC: 2
2577-144RET: RNCC: 5 | RNVC: 9
10117476: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-837-9912
Dust And Moisture Seal Protective Plug

008379912
HS5884-0437: RNCC: 3 | RNVC: 2
DP-437-2633: RNCC: 3 | RNVC: 2
2633 /BLACK/: RNCC: 5 | RNVC: 2
DP437: RNCC: 5 | RNVC: 2
DP-437 BLACK: RNCC: 5 | RNVC: 2
2633: RNCC: 5 | RNVC: 2
999/4/35300/001: RNCC: 5 | RNVC: 2
2633DP437: RNCC: 5 | RNVC: 2
1362820: RNCC: 5 | RNVC: 2
353-403: RNCC: 5 | RNVC: 2

14 Dec 1966

5340-00-840-0954
Bow Handle

008400954
B 1013-14: RNCC: 3 | RNVC: 2
B05: RNCC: 5 | RNVC: 2
MS39087-4: RNCC: 5 | RNVC: 2
1013-14: RNCC: 5 | RNVC: 9
5340008400954: RNCC: 5 | RNVC: 9
1075-2: RNCC: 5 | RNVC: 9
MS9087-4: RNCC: 5 | RNVC: 9
839626-00: RNCC: 5 | RNVC: 9
MS39087-4: RNCC: 5 | RNVC: 9
415-1075-01-12: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-924-1738
Mortise Latch Set

009241738
A100T3: RNCC: 3 | RNVC: 2
FF-H-106: RNCC: 4 | RNVC: 1
FFH00106: RNCC: 5 | RNVC: 9
200BUS3P: RNCC: 5 | RNVC: 9
LF5301: RNCC: 5 | RNVC: 9
A10S: RNCC: 5 | RNVC: 9
A10SPLY3: RNCC: 5 | RNVC: 9
A100: RNCC: 5 | RNVC: 9

9 Jan 1966

5340-01-046-5900
Loop Clamp

010465900
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P18N: RNCC: 3 | RNVC: 2

19 Aug 1977

5340-00-957-8205
Loop Clamp

009578205
F2NY-375-0: RNCC: 3 | RNVC: 2
3-8-2: RNCC: 3 | RNVC: 2
998818-14: RNCC: 3 | RNVC: 2
134053-007: RNCC: 5 | RNVC: 2
51021-407: RNCC: 5 | RNVC: 2
3/8-2-128: RNCC: 5 | RNVC: 9
900865-012: RNCC: 5 | RNVC: 9
F2NY-375BK: RNCC: 5 | RNVC: 9
10169-012: RNCC: 7 | RNVC: 2
257942-19: RNCC: 7 | RNVC: 2

1 Jan 1962

5340-00-958-8457
Loop Clamp

009588457
NASM21333: RNCC: 3 | RNVC: 1
MS21333-78: RNCC: 3 | RNVC: 2
13207E2941FN16: RNCC: 5 | RNVC: 1
MS21333-78: RNCC: 5 | RNVC: 9
456720124602: RNCC: 6 | RNVC: 9
5342PL0814670: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-928-2608
Spring Tension Clip

009282608
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-210: RNCC: 3 | RNVC: 2
M24066/2-210: RNCC: 5 | RNVC: 9
MS17160-10: RNCC: 5 | RNVC: 9
6014-62CC: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9

26 Aug 1966

5340-00-882-1429
Nut And Bolt Retainer

008821429
NAS578: RNCC: 3 | RNVC: 1
NAS578-9A: RNCC: 3 | RNVC: 2
2577-098RET: RNCC: 5 | RNVC: 2
2577-098RET: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-010-4536
Loop Clamp

010104536
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D37-38N: RNCC: 3 | RNVC: 2

29 Sep 1975

5340-00-963-8310
Mortise Lock Set

009638310
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F82A GRADE 2: RNCC: 3 | RNVC: 2
ANSI A156.2 TY F82 GR2 SER 4000: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-708-0348
Dust And Moisture Seal Protective Plug

017080348
424-4326A: RNCC: 3 | RNVC: 2

11 Mar 2023

5340-01-707-6790
Dust And Moisture Seal Protective Cap

017076790
145S3384-36: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-365-3291
Loop Clamp

013653291
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7T: RNCC: 3 | RNVC: 2

6 Oct 1992

5340-00-187-8186
Turnbuckle

001878186
ASTM F 1145-5: RNCC: 3 | RNVC: 2
11157-1-64: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-613-0388
Mounting Bracket

006130388
6787537: RNCC: 3 | RNVC: 2
6787537: RNCC: 5 | RNVC: 2
6787537: RNCC: 5 | RNVC: 9
5340PL2013462: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-685-6523
Butt Hinge Leaf

006856523
MS20001PX2-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PX2-7200: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-709-9429
Electrical Clamp Hook

007099429
NAS622: RNCC: 3 | RNVC: 1
NAS622CT3: RNCC: 3 | RNVC: 2
107246-3: RNCC: 5 | RNVC: 2
416758-2: RNCC: 5 | RNVC: 2
NAS622CT3: RNCC: 5 | RNVC: 2
B69617: RNCC: 5 | RNVC: 2
SL1243CT3: RNCC: 5 | RNVC: 2
947048-113: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-712-0204
Dust And Moisture Seal Protective Cap

007120204
NAS846: RNCC: 3 | RNVC: 1
NAS846P8: RNCC: 3 | RNVC: 2
MIL-C-5501/6: RNCC: 5 | RNVC: 9
M5501/6-F8: RNCC: 5 | RNVC: 9
7120204: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-107-6217
Arched Cushion

001076217
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-06: RNCC: 3 | RNVC: 2
MS9393-06: RNCC: 3 | RNVC: 9
AMS3303: RNCC: 5 | RNVC: 1
MS9393-06: RNCC: 5 | RNVC: 9
AMS3303: RNCC: 5 | RNVC: 9

26 Jul 1968

5340-00-820-3192
Detent Plunger

008203192
8768707: RNCC: 3 | RNVC: 2
5340008203192: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-515-0136
Loop Clamp

005150136
HP18N: RNCC: 3 | RNVC: 2
54967-18A: RNCC: 5 | RNVC: 2
HP18N: RNCC: 5 | RNVC: 2
3522 500 22847: RNCC: 5 | RNVC: 2
HP-18N: RNCC: 5 | RNVC: 2
1019760-018: RNCC: 5 | RNVC: 9
CP1295-18: RNCC: 5 | RNVC: 9
HP18N: RNCC: 5 | RNVC: 9
HP18N: RNCC: 5 | RNVC: 9
C15109-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-426-4656
Loop Clamp

004264656
4D7794: RNCC: 3 | RNVC: 2
4D-7794: RNCC: 5 | RNVC: 2
10341100: RNCC: 6 | RNVC: 9

16 Apr 1971

5340-00-400-0002
Loop Clamp

004000002
MS9350-19: RNCC: 2 | RNVC: 2
MS9350: RNCC: 4 | RNVC: 1

7 Mar 1969

5340-00-426-4653
Loop Clamp

004264653
CCV1117: RNCC: 3 | RNVC: 2
4K8302: RNCC: 3 | RNVC: 2
4K-8302: RNCC: 5 | RNVC: 2

16 Apr 1971

5340-00-515-1236
Plain Solid Disk

005151236
236125N: RNCC: 3 | RNVC: 2
236125: RNCC: 3 | RNVC: 9
745-236125N: RNCC: 5 | RNVC: 2
33802: RNCC: 5 | RNVC: 2
47972: RNCC: 5 | RNVC: 2
6B236125: RNCC: 5 | RNVC: 2
9L2277: RNCC: 5 | RNVC: 2
R30150R: RNCC: 5 | RNVC: 2
10A10648: RNCC: 5 | RNVC: 2
92C114: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-567-6202
Retaining Strap

005676202
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D32-31N: RNCC: 3 | RNVC: 2

28 Nov 1974

5340-00-804-0776
Dust And Moisture Seal Protective Cap

008040776
NAS835: RNCC: 3 | RNVC: 1
NAS835-5A: RNCC: 3 | RNVC: 2
M5501/3-5: RNCC: 5 | RNVC: 9
MILC5501TYPE2CLASSASIZE5: RNCC: 5 | RNVC: 9
13039-5: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-435-5740
Dust And Moisture Seal Protective Cap

004355740
NAS947: RNCC: 3 | RNVC: 1
NAS947-64: RNCC: 3 | RNVC: 2

26 Mar 1969

5340-00-598-0279
Loop Clamp

005980279
AN742-3: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-685-0568
Loop Clamp

006850568
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C26N: RNCC: 3 | RNVC: 2
MS9024-25: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-0768
Dust And Moisture Seal Protective Cap

008040768
NAS835: RNCC: 3 | RNVC: 1
NAS835-10A: RNCC: 3 | RNVC: 2
M5501/3-8: RNCC: 5 | RNVC: 9
M5501/3-10: RNCC: 5 | RNVC: 9
MILC5501TYPE2CLASSASIZE10: RNCC: 5 | RNVC: 9
5340PL1455471: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-786-1564
Shimmy Damper

007861564
116457H1: RNCC: 3 | RNVC: 2
M3888: RNCC: 3 | RNVC: 2
J4487-1E: RNCC: 5 | RNVC: 2
870-207: RNCC: 5 | RNVC: 2
116457H1: RNCC: 5 | RNVC: 2
68880: RNCC: 5 | RNVC: 2
70066467: RNCC: 5 | RNVC: 9
M3888: RNCC: 5 | RNVC: 9
3Q1005C: RNCC: 5 | RNVC: 9
10A3436: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-493-7020
Loop Clamp

004937020
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D24KWX: RNCC: 3 | RNVC: 2
MS21122-24: RNCC: 5 | RNVC: 9
5340PL0726166: RNCC: 6 | RNVC: 9
5340PL1758947: RNCC: 6 | RNVC: 9

15 Oct 1972

5340-00-634-7276
Plug Button

006347276
NAS451: RNCC: 3 | RNVC: 1
NAS-451-5: RNCC: 3 | RNVC: 2
NAS451-5: RNCC: 3 | RNVC: 2
51087: RNCC: 5 | RNVC: 9
36215: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-634-7830
Loop Clamp

006347830
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122924: RNCC: 3 | RNVC: 2
MS122924: RNCC: 3 | RNVC: 9
MS122924: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-0775
Dust And Moisture Seal Protective Cap

008040775
NAS835: RNCC: 3 | RNVC: 1
NAS835-12A: RNCC: 3 | RNVC: 2
MILC5501TYPE2CLASSASIZE12: RNCC: 5 | RNVC: 9
M5501/3-12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-576-0551
Loop Clamp

005760551
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-32: RNCC: 3 | RNVC: 2
AN735-32: RNCC: 3 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 1
1139-32CP: RNCC: 5 | RNVC: 9
AS7351: RNCC: 5 | RNVC: 9
AS7351-32: RNCC: 5 | RNVC: 9
807283-00: RNCC: 5 | RNVC: 9
AN735-32: RNCC: 5 | RNVC: 9
5340PL0819064: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-371-4134
Spring Tension Clip

003714134
637427: RNCC: 3 | RNVC: 2
SFC3052F: RNCC: 5 | RNVC: 2
FC3052: RNCC: 5 | RNVC: 2
240205: RNCC: 5 | RNVC: 2
3-92911: RNCC: 5 | RNVC: 2
637427: RNCC: 5 | RNVC: 2
709818: RNCC: 5 | RNVC: 2
6CFC3052: RNCC: 5 | RNVC: 2
11657610: RNCC: 5 | RNVC: 2
194701: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-532-9231
Loop Clamp

005329231
X400: RNCC: 3 | RNVC: 2
B52-1111-2: RNCC: 3 | RNVC: 2
X51: RNCC: 3 | RNVC: 2
3B1084: RNCC: 3 | RNVC: 2
P20-0586: RNCC: 5 | RNVC: 2
6639: RNCC: 5 | RNVC: 2
A400: RNCC: 5 | RNVC: 2
2530B: RNCC: 5 | RNVC: 2
VD400: RNCC: 5 | RNVC: 2
U400: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-726-0784
Retaining Strap

007260784
NASM21315: RNCC: 3 | RNVC: 1
MS21315-31: RNCC: 3 | RNVC: 2
FFS760TYPE3STYLEA: RNCC: 5 | RNVC: 9
MS21315-31: RNCC: 5 | RNVC: 9

23 Feb 1968

5340-00-727-8400
Loop Clamp

007278400
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P8B: RNCC: 3 | RNVC: 2
947015-1081: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-414-8438
Threaded Rod End

004148438
GT11D-1: RNCC: 3 | RNVC: 2
GT11D1: RNCC: 3 | RNVC: 2
GT11D-1: RNCC: 5 | RNVC: 2
GT11D-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-780-8450
Loop Clamp

007808450
MS25281R17: RNCC: 2 | RNVC: 2
SAE-AS25281: RNCC: 5 | RNVC: 1
SAE-AS25821: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-323-4558
Retaining Strap

013234558
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-14N: RNCC: 3 | RNVC: 2

27 Jul 1990

5340-00-359-1046
Spring Tension Clip

003591046
016128600: RNCC: 3 | RNVC: 2
F9039: RNCC: 5 | RNVC: 2
10911068: RNCC: 5 | RNVC: 2
FD9039: RNCC: 5 | RNVC: 2
F9039J: RNCC: 5 | RNVC: 9
360700C2: RNCC: 5 | RNVC: 9
87772R1: RNCC: 5 | RNVC: 9
FD9039J: RNCC: 5 | RNVC: 9
FD9039K: RNCC: 5 | RNVC: 9
583K939: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-616-4401
Loop Clamp

006164401
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122900: RNCC: 3 | RNVC: 2
10-90203-2: RNCC: 5 | RNVC: 1
10-90203-2: RNCC: 5 | RNVC: 9
10-90203-2: RNCC: 5 | RNVC: 9
MS122900: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-543-3664
Loop Clamp

005433664
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C3N: RNCC: 3 | RNVC: 2
MS9024-02: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-664-8164
Loop Clamp

006648164
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG15: RNCC: 3 | RNVC: 2
AS21919WDG15: RNCC: 3 | RNVC: 9
4116200-116: RNCC: 5 | RNVC: 2
MS21919WDG15: RNCC: 5 | RNVC: 2
TA1718WD15X: RNCC: 5 | RNVC: 2
MS21919-WDG15: RNCC: 5 | RNVC: 9
AS21919WDG15: RNCC: 5 | RNVC: 9
MS21919WDG15: RNCC: 5 | RNVC: 9
10117426: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-596-7612
Loop Clamp

005967612
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-14N: RNCC: 3 | RNVC: 2

11 Jan 1975

5340-00-505-3241
Nut And Bolt Retainer

005053241
NAS578: RNCC: 3 | RNVC: 1
NAS578-16B: RNCC: 3 | RNVC: 2
3320-162RET: RNCC: 5 | RNVC: 9

20 Jul 1974

5340-00-597-0055
Loop Clamp

005970055
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122902: RNCC: 3 | RNVC: 2
6739841-4: RNCC: 5 | RNVC: 1
6739841-4: RNCC: 5 | RNVC: 1
MS122902: RNCC: 5 | RNVC: 9
5340PL0626809: RNCC: 6 | RNVC: 9
MS1229-02: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-531-7252
Loop Clamp

005317252
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122913: RNCC: 3 | RNVC: 2
MS122913: RNCC: 3 | RNVC: 9
MS122913: RNCC: 5 | RNVC: 9
10117393: RNCC: 6 | RNVC: 9
5342PL0209198: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-412-9968
Spring Tension Clip

004129968
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-216: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066-2-216: RNCC: 5 | RNVC: 9
MS17160-116: RNCC: C | RNVC: 1
C304-00CR: RNCC: C | RNVC: 1
MS17160-116: RNCC: E | RNVC: 8

6 May 1970

5340-00-108-9873
Spring Tension Clip

001089873
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B022-03C: RNCC: 3 | RNVC: 2
6086-1CC: RNCC: 5 | RNVC: 2
6086-1CC: RNCC: 5 | RNVC: 9

29 Dec 1972

5340-01-023-2213
Loop Clamp

010232213
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P10B: RNCC: 3 | RNVC: 2

12 Jun 1976

5340-01-197-3616
Loop Clamp

011973616
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-18: RNCC: 3 | RNVC: 2
MS9349-18: RNCC: 5 | RNVC: 9
1213E2672 FIND 45: RNCC: 5 | RNVC: 9

20 Dec 1984

5340-01-193-7420
Electrical-Mechanical Equipment Post

011937420
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C18: RNCC: 3 | RNVC: 2
NAS1786C06-18: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-01-211-6237
Butt Hinge

012116237
AA55594-18C: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-18C: RNCC: 5 | RNVC: 9

28 Jun 1985

5340-01-242-0956
Electrical-Mechanical Equipment Post

012420956
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C52: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-01-203-6543
Spring Tension Clip

012036543
7350: RNCC: 3 | RNVC: 2
5154: RNCC: 3 | RNVC: 9
80-7350: RNCC: 7 | RNVC: 2

16 Mar 1985

5340-01-265-6332
Electrical-Mechanical Equipment Post

012656332
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6E14: RNCC: 3 | RNVC: 2

17 Oct 1987

5340-01-278-2420
Retaining Strap

012782420
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C56-40N: RNCC: 3 | RNVC: 2

3 May 1988

5340-01-701-2035
Block Clamp

017012035
10-SB-1-R-250X2: RNCC: 3 | RNVC: 2
571-181801 PC38: RNCC: D | RNVC: 9

3 May 2022

5340-01-702-4352
Seal Retaining Plate

017024352
114T4225-5: RNCC: 3 | RNVC: 2

7 Jul 2022

5340-01-702-4962
Block Clamp

017024962
270T0004-119: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-703-2141
Seal Retaining Plate

017032141
114T4225-9: RNCC: 3 | RNVC: 2

23 Aug 2022

5340-01-699-7277
Mounting Bracket

016997277
CMB-10-U-SS: RNCC: 3 | RNVC: 9
CMB-10-U-SS: RNCC: 5 | RNVC: 2
CMB-10-U-SS: RNCC: 5 | RNVC: 2
CMB-10-U-SS: RNCC: 5 | RNVC: 2

22 Feb 2022

5340-01-700-1048
Synchro Clamp

017001048
1629AS108-1: RNCC: 3 | RNVC: 2
1629AS108-1: RNCC: 5 | RNVC: 2
1629AS108: RNCC: D | RNVC: 9

17 Mar 2022

5340-00-107-2262
Angle Bracket

001072262
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-050: RNCC: 3 | RNVC: 2
MS9592-050: RNCC: 5 | RNVC: 9
5340PL1559580: RNCC: 6 | RNVC: 9

2 Aug 1968

5340-00-232-5723
Expansion Plug

002325723
MS35648-6: RNCC: 2 | RNVC: 2
MIL-P-20691: RNCC: 4 | RNVC: 1
5294142: RNCC: 5 | RNVC: 1
172540: RNCC: 5 | RNVC: 1
103893: RNCC: 5 | RNVC: 1
SA10: RNCC: 5 | RNVC: 1
12X395: RNCC: 5 | RNVC: 1
172540: RNCC: 5 | RNVC: 1
910003: RNCC: 5 | RNVC: 1
47563: RNCC: 5 | RNVC: 1

1 Jan 1961

5340-00-150-3053
Dust And Moisture Seal Protective Cap

001503053
NAS947: RNCC: 3 | RNVC: 1
NAS947-20: RNCC: 3 | RNVC: 2

2 Sep 1970

5340-00-151-6004
Loop Clamp

001516004
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D22KWX: RNCC: 3 | RNVC: 2
MS21122-22: RNCC: 5 | RNVC: 9

1 Feb 1971

5340-00-235-1808
Hinged Hasp

002351808
BHMA-A156.20: RNCC: 3 | RNVC: 1
BHMA-A156.20 A83162 3-1/4IN: RNCC: 3 | RNVC: 2
ANS1A156.20 A83162: RNCC: 5 | RNVC: 9
FFH111: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-282-7521
Loop Clamp

002827521
NASM21333: RNCC: 3 | RNVC: 1
MS21333-40: RNCC: 3 | RNVC: 2
120527: RNCC: 5 | RNVC: 2
120527: RNCC: 5 | RNVC: 9
MS21333-40: RNCC: 5 | RNVC: 9
5340002827521: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-338-4308
Retaining Strap

003384308
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C4-24S: RNCC: 3 | RNVC: 2
MS63044-10: RNCC: 5 | RNVC: 9

4 Jan 1974

5340-00-158-3719
Angle Bracket

001583719
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-015: RNCC: 3 | RNVC: 2
AS9593-015: RNCC: 5 | RNVC: 9
MS9593-015: RNCC: 5 | RNVC: 9

31 Mar 1971

5340-00-338-3095
Butt Hinge

003383095
MS20001P10-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001P10-2330: RNCC: C | RNVC: 1
17P1A1216-3: RNCC: C | RNVC: 1
70207-23012-112: RNCC: C | RNVC: 1
70209-22432-110: RNCC: C | RNVC: 1

4 Jan 1974

5340-00-170-0627
Loop Clamp

001700627
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F15: RNCC: 3 | RNVC: 2
MS25281F15: RNCC: 5 | RNVC: 9
MS25281-F15: RNCC: C | RNVC: 1

14 Feb 1973

5340-00-181-1620
Retaining Strap

001811620
10889763: RNCC: 3 | RNVC: 2
5340001811620: RNCC: 5 | RNVC: 9

17 Dec 1969

5340-00-186-3416
Loop Clamp

001863416
AN742D16: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
755-16: RNCC: 5 | RNVC: 1
SS7562A100: RNCC: 5 | RNVC: 1
5340PL0727542: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-188-0332
Turnbuckle

001880332
FFT791-TY1-FM1-CL7-1/2X9: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1
C228-1-2X9: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0109
Loop Clamp

001930109
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-17: RNCC: 3 | RNVC: 2
AN735-17: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0100
Loop Clamp

001930100
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-8: RNCC: 3 | RNVC: 2
AN735-8: RNCC: 3 | RNVC: 9
AN735-8: RNCC: 5 | RNVC: 2
AS7351-8: RNCC: 5 | RNVC: 9
AN735-8: RNCC: 5 | RNVC: 9
AN735-8: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-193-0098
Loop Clamp

001930098
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-4: RNCC: 3 | RNVC: 2
AN735-4: RNCC: 3 | RNVC: 9
AN735-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0101
Loop Clamp

001930101
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-9: RNCC: 3 | RNVC: 2
AN735-9: RNCC: 3 | RNVC: 9
21C2205-023: RNCC: 5 | RNVC: 1
AN735-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0783
Dust And Moisture Seal Protective Cap

001930783
SAE-AS85049/138: RNCC: 3 | RNVC: 1
M85049/138-36A: RNCC: 3 | RNVC: 2
EC-18: RNCC: 5 | RNVC: 1
AS90376: RNCC: 5 | RNVC: 1
8783151: RNCC: 5 | RNVC: 1
9018440: RNCC: 5 | RNVC: 1
EC18: RNCC: 5 | RNVC: 1
110400: RNCC: 5 | RNVC: 1
1219270-8: RNCC: 5 | RNVC: 1
MS90376-18R: RNCC: 5 | RNVC: 1

16 Mar 1970

5340-00-193-0139
Loop Clamp

001930139
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D3: RNCC: 3 | RNVC: 2
AN735D3: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-764-2334
Strap Fastener Loop

007642334
NASM51939: RNCC: 3 | RNVC: 1
MS51939-1: RNCC: 3 | RNVC: 2
MS51939-1: RNCC: 5 | RNVC: 9
5340007642334: RNCC: 5 | RNVC: 9
5340007642334: RNCC: 6 | RNVC: 9
MS51939A-1: RNCC: E | RNVC: 8

1 Jan 1960

5340-00-354-3726
Butt Hinge Leaf

003543726
MS20001PH14-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PN14-7200: RNCC: 5 | RNVC: 1
MS20001PY14-200: RNCC: 5 | RNVC: 9

5 Apr 1971

5340-00-456-2611
Bow Handle

004562611
ABA8: RNCC: 3 | RNVC: 2
A 1012-30: RNCC: 3 | RNVC: 2
1214AS143: RNCC: 3 | RNVC: 2
38693-1: RNCC: 5 | RNVC: 2
911375-6: RNCC: 5 | RNVC: 2
1064-30: RNCC: 5 | RNVC: 9
015-1481-00: RNCC: 5 | RNVC: 9
9998-2801: RNCC: 5 | RNVC: 9
959383-1: RNCC: 7 | RNVC: 2
13059198: RNCC: 7 | RNVC: 2

23 Apr 1969

NSN 5340-00-119-1756 001191756 CLAMP,LOOP

5340-00-119-1756
Loop Clamp

001191756
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D10NH: RNCC: 3 | RNVC: 2
601180: RNCC: 5 | RNVC: 2
MS9352-09: RNCC: 5 | RNVC: 9
MS9352-09: RNCC: 5 | RNVC: 9

23 Oct 1968

5340-00-591-4947
Spring Tension Clip

005914947
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-003: RNCC: 3 | RNVC: 2
MILC24066: RNCC: 5 | RNVC: 9
M24066/4-003: RNCC: 5 | RNVC: 9

3 Jan 1975

5340-00-764-7053
Loop Clamp

007647053
NASM21334: RNCC: 3 | RNVC: 1
MS21334-35: RNCC: 3 | RNVC: 2
MS21334-35: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-322-6700
Retaining Strap

013226700
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C16W22N: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-00-055-2392
Loop Clamp

000552392
AN742F13: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jun 1967

5340-01-568-0220
Dust And Moisture Seal Protective Cover

015680220
P777920: RNCC: 3 | RNVC: 2
873740: RNCC: 5 | RNVC: 2

16 Oct 2008

5340-01-357-4540
Retaining Strap

013574540
NASM85449/1: RNCC: 3 | RNVC: 1
M85449/1-28: RNCC: 3 | RNVC: 2
M85449/1-28: RNCC: 5 | RNVC: 9
MIL-C-85449/1: RNCC: 5 | RNVC: 9

23 Apr 1992

5340-01-592-9025
Sliding Door Track

015929025
R00240_HST-2_RH: RNCC: 3 | RNVC: 2
R00240-HST-2-RH: RNCC: 3 | RNVC: 2

28 Mar 2011

5340-01-413-3084
Loop Clamp

014133084
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C15Z: RNCC: 3 | RNVC: 2
NAS1715C15M: RNCC: 5 | RNVC: 9

10 May 1995

5340-01-420-3624
Loop Clamp

014203624
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-20S: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-01-430-2384
Swivel Caster

014302384
A-A-55619-8SUL: RNCC: 2 | RNVC: 2
AA55619-8SUL: RNCC: 2 | RNVC: 2
A-A-55619: RNCC: 4 | RNVC: 1
A-A-55619-8SUL: RNCC: 5 | RNVC: 1

25 Apr 1996

5340-00-441-9781
Retaining Strap

004419781
MS63044-4: RNCC: 2 | RNVC: 2
MS63044: RNCC: 4 | RNVC: 1

10 Dec 1969

5340-01-419-3837
Dust And Moisture Seal Protective Cap

014193837
M5501/3-106G: RNCC: 3 | RNVC: 2
MIL-C-5501/3: RNCC: 4 | RNVC: 1

21 Sep 1995

5340-01-102-4459
Webbing Strap

011024459
NAS1212: RNCC: 3 | RNVC: 1
NAS1212P15AA110: RNCC: 3 | RNVC: 2

21 Oct 1980

5340-01-087-0681
Expansion Plug

010870681
213395: RNCC: 3 | RNVC: 2
5340010870681: RNCC: 6 | RNVC: 9

11 Dec 1979

5340-00-000-0057
Door Closer

000000057
BHMA-A156.4: RNCC: 3 | RNVC: 1
BHMA-A156.4 C02012 SIZE 2: RNCC: 3 | RNVC: 2
FF-H-121: RNCC: 5 | RNVC: 1
A156.4 TYPE C02012 SIZE 2: RNCC: 5 | RNVC: 1
A156.4 TYPE C02012 SIZE 2: RNCC: 5 | RNVC: 9

23 Nov 1975

5340-00-316-6937
Retaining Strap

003166937
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10-39N: RNCC: 3 | RNVC: 2
10117332: RNCC: 6 | RNVC: 9

11 Nov 1973

5340-00-254-5025
Loop Clamp

002545025
SAE-AS21919: RNCC: 3 | RNVC: 1
MS21919WCJ12: RNCC: 3 | RNVC: 2
AS21919WCJ12: RNCC: 3 | RNVC: 2
MS21919WCJ12: RNCC: 5 | RNVC: 1
127-0027-011: RNCC: 5 | RNVC: 1
MS21919WCJ12: RNCC: 5 | RNVC: 1
MS21919WCJ12: RNCC: 5 | RNVC: 1
MS21919WCJ12: RNCC: 5 | RNVC: 2
MS21919WCJ12: RNCC: 5 | RNVC: 2
9463105612: RNCC: 5 | RNVC: 2

25 Jul 1969

5340-00-005-8154
Loop Clamp

000058154
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D11-18N: RNCC: 3 | RNVC: 2

25 Jun 1972

5340-00-007-0323
Electrical-Mechanical Equipment Post

000070323
8233-SS-0632-7: RNCC: 3 | RNVC: 2
8233-SS-0632-0: RNCC: 3 | RNVC: 2
1944684-229: RNCC: 5 | RNVC: 2
8233-SS-0632-7: RNCC: 5 | RNVC: 9
2128-632-SS-20: RNCC: 5 | RNVC: 9
76873-22: RNCC: 5 | RNVC: 9
8233-SS-0632-0: RNCC: 5 | RNVC: 9
1130H-SS-2.000-12: RNCC: 5 | RNVC: 9
NAS1786C06-32: RNCC: C | RNVC: 1
P-625-M12-F05-632: RNCC: C | RNVC: 1

25 Jun 1972

5340-00-229-4243
Butt Hinge

002294243
MS27956-44: RNCC: 2 | RNVC: 2
MS27956: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-229-4354
Butt Hinge

002294354
AA50432 TYII, CLI 4X4 2: RNCC: 2 | RNVC: 2
A-A-50432: RNCC: 4 | RNVC: 1
A-A-50432: RNCC: 5 | RNVC: 9
A-A-50432TY2CL1-4INX4IN: RNCC: 5 | RNVC: 9
MILH1237: RNCC: 5 | RNVC: 9
AA50432 TYII, CLI 4X4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-230-2038
Loop Clamp

002302038
MS21106-12: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

12 Mar 1971

5340-00-231-2599
Butt Hinge

002312599
AA50432 TYIII, CLIII STA 3X3 1.5: RNCC: 2 | RNVC: 2
A-A-50432: RNCC: 4 | RNVC: 1
A-A-50432TYPIII,CLIII,STYA: RNCC: 5 | RNVC: 9
MILH1237: RNCC: 5 | RNVC: 9
AA50432 TYIII, CLIII STA 3X3: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-008-5829
Loop Clamp

000085829
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-13: RNCC: 3 | RNVC: 2
MS9349-13: RNCC: 3 | RNVC: 9
MS9349-13: RNCC: 5 | RNVC: 9

28 Jul 1972

5340-00-014-0011
Dust And Moisture Seal Protective Plug

000140011
NAS820: RNCC: 3 | RNVC: 1
NAS820-14A: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-00-016-7575
Spring Tension Clip

000167575
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-032-04C: RNCC: 3 | RNVC: 2
6009-12C: RNCC: 5 | RNVC: 9
6009-12C: RNCC: C | RNVC: 1

25 Apr 1967

5340-00-057-4094
Retaining Strap

000574094
NASM760: RNCC: 3 | RNVC: 1
MS35140-16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-060-3081
Angle Bracket

000603081
SAE-AS9228: RNCC: 3 | RNVC: 1
MS9228-05: RNCC: 3 | RNVC: 2
MS9228-05: RNCC: 3 | RNVC: 9
MS9228-05: RNCC: 5 | RNVC: 9

13 Jun 1967

5340-00-276-5849
Expansion Plug

002765849
172557: RNCC: 3 | RNVC: 2
117921: RNCC: 3 | RNVC: 2
BEDX1AS: RNCC: 5 | RNVC: 2
117921: RNCC: 5 | RNVC: 9
117921: RNCC: 5 | RNVC: 9
117921: RNCC: 5 | RNVC: 9
71237: RNCC: 5 | RNVC: 9
117921: RNCC: 5 | RNVC: 9
30112: RNCC: 5 | RNVC: 9
30556: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-061-2381
Loop Clamp

000612381
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F13: RNCC: 3 | RNVC: 2
AS25281F13: RNCC: 3 | RNVC: 9
150-0708-120: RNCC: 5 | RNVC: 2
AS25281F13: RNCC: 5 | RNVC: 9
MS25281F13: RNCC: 5 | RNVC: 9

19 Nov 1972

5340-00-067-9873
Turnbuckle Body

000679873
MS21251-B2L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
AN155B8L: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-0600
Rod End Connector

000690600
MS21254-3LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-069-0606
Rod End Connector

000690606
MS21254-6RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-069-4938
Rod End Connector

000694938
MS21255-10LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-279-4297
Loop Clamp

002794297
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-06: RNCC: 3 | RNVC: 2
MS9349-06: RNCC: 5 | RNVC: 9

19 Aug 1973

5340-01-173-0178
Loop Clamp

011730178
AA52406-11: RNCC: 2 | RNVC: 2
A-A-52406: RNCC: 4 | RNVC: 1
4537363-801: RNCC: 5 | RNVC: 2
92641-991: RNCC: 5 | RNVC: 9
92846-991: RNCC: 5 | RNVC: 9
MS52150-11: RNCC: 5 | RNVC: 9
4537363-801: RNCC: 5 | RNVC: 9

29 Feb 1984

5340-00-144-6721
Spring Tension Clip

001446721
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-223: RNCC: 3 | RNVC: 2
416949-123: RNCC: 5 | RNVC: 1
100-300-7-0: RNCC: 5 | RNVC: 1
944815-223: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066-2-223: RNCC: 5 | RNVC: 9

27 Jun 1969

5340-00-282-7966
Loop Clamp

002827966
115-38-4: RNCC: 3 | RNVC: 2
238-5050-4: RNCC: 3 | RNVC: 2
103049-04: RNCC: 3 | RNVC: 2
100763-008: RNCC: 5 | RNVC: 2
907747-04: RNCC: 5 | RNVC: 2
8599093-005: RNCC: 5 | RNVC: 2
8642810: RNCC: 5 | RNVC: 2
291AS253-1: RNCC: 5 | RNVC: 2
2343K11P047: RNCC: 5 | RNVC: 2
5/16-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-144-6653
Loop Clamp

001446653
NASM21322: RNCC: 3 | RNVC: 1
MS21322-50: RNCC: 3 | RNVC: 2
MS21322-50: RNCC: 5 | RNVC: 9
2GL562: RNCC: 5 | RNVC: 9

11 Jun 1969

5340-00-171-2436
Dust And Moisture Seal Protective Cap-Plug

001712436
MS90376-18Y: RNCC: 3 | RNVC: 2
MS90376-18Y: RNCC: 3 | RNVC: 9
272.505 891: RNCC: 5 | RNVC: 2
7889-1689: RNCC: 5 | RNVC: 2
025-0484-000: RNCC: 5 | RNVC: 2
025-0484-000: RNCC: 5 | RNVC: 2
025-0484-000: RNCC: 5 | RNVC: 2
72227: RNCC: 5 | RNVC: 2
8783150: RNCC: 5 | RNVC: 9
831534-00: RNCC: 5 | RNVC: 9

1 Sep 1972

5340-00-200-8639
Loop Clamp

002008639
AN742-8: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
5340PL1823500: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-051-8315
Dust And Moisture Seal Protective Cap

000518315
NAS947: RNCC: 3 | RNVC: 1
NAS947-40: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-054-1404
Expansion Plug

000541404
MS35648-10: RNCC: 2 | RNVC: 2
MIL-P-20691: RNCC: 4 | RNVC: 1
0910007-4: RNCC: 5 | RNVC: 1
117923: RNCC: 5 | RNVC: 9
172570: RNCC: 5 | RNVC: 9
910007: RNCC: 5 | RNVC: 9
952438: RNCC: 5 | RNVC: 9
A-A-52420-10: RNCC: 5 | RNVC: 9
172570: RNCC: 5 | RNVC: 9
0910007: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-244-7327
Strapping Seal

002447327
ST256: RNCC: 3 | RNVC: 2
C256: RNCC: 5 | RNVC: 2
MCD4122ITEM7: RNCC: 5 | RNVC: 2
2106: RNCC: 5 | RNVC: 2
04248305: RNCC: 5 | RNVC: 2
BANDITBUCKLES: RNCC: 5 | RNVC: 2
MC256: RNCC: 5 | RNVC: 2
C25699: RNCC: 5 | RNVC: 2
03315926: RNCC: 5 | RNVC: 2
04248305: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-150-2772
Loop Clamp

001502772
NASM21333: RNCC: 3 | RNVC: 1
MS21333-84: RNCC: 3 | RNVC: 2
502762: RNCC: 5 | RNVC: 1
MS21333-84: RNCC: 5 | RNVC: 9
456720125908: RNCC: 6 | RNVC: 9

2 Jul 1970

5340-00-053-8994
Loop Clamp

000538994
NASM21333: RNCC: 3 | RNVC: 1
MS21333-126: RNCC: 3 | RNVC: 2
LS1091000-126: RNCC: 5 | RNVC: 2
NASM21333-126: RNCC: 5 | RNVC: 2
MS21333-126: RNCC: 5 | RNVC: 9
456720128000: RNCC: 6 | RNVC: 9
534000538994: RNCC: 6 | RNVC: 9
1027RC: RNCC: E | RNVC: 8
7529133: RNCC: E | RNVC: 8

1 Jan 1961

5340-01-446-1401
Bow Handle

014461401
NASM39087: RNCC: 3 | RNVC: 1
MS39087-413CP: RNCC: 3 | RNVC: 2
MS39087-413CP: RNCC: 5 | RNVC: 9

24 Jun 1997

5340-01-411-6413
Webbing Strap

014116413
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10K25: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-00-054-1414
Expansion Plug

000541414
A52420-15: RNCC: 2 | RNVC: 2
A-A-52420: RNCC: 4 | RNVC: 1
172592: RNCC: 5 | RNVC: 1
541414: RNCC: 5 | RNVC: 1
12F200: RNCC: 5 | RNVC: 1
517-0027: RNCC: 5 | RNVC: 9
S723: RNCC: 5 | RNVC: 9
204K420: RNCC: 5 | RNVC: 9
172592: RNCC: 5 | RNVC: 9
23139V: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-022-4178
Retaining Strap

000224178
NASM760: RNCC: 3 | RNVC: 1
MS35140-20: RNCC: 3 | RNVC: 2
PTMC250: RNCC: 5 | RNVC: 9
FF-S-760A: RNCC: 5 | RNVC: 9
MS35140-20: RNCC: 5 | RNVC: 9
FFS760: RNCC: 5 | RNVC: 9

2 May 1967

5340-01-086-3709
Butt Hinge

010863709
A-A-55594-11E: RNCC: 2 | RNVC: 2
AA55594-11E: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-11E: RNCC: 5 | RNVC: 1
MS35829-1E: RNCC: 5 | RNVC: 1
MS35829-11E: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-01-166-0845
Spring Tension Clip

011660845
7G3833: RNCC: 3 | RNVC: 2
7G-3833: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-00-141-6548
Bail Handle

001416548
MS18012-1: RNCC: 2 | RNVC: 2
MS18012: RNCC: 4 | RNVC: 1
MS18012-31: RNCC: C | RNVC: 1

12 Jan 1973

5340-00-194-3764
Butt Hinge

001943764
MS35824-3C: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1
MS35824-3C: RNCC: 5 | RNVC: 9
1727190: RNCC: C | RNVC: 1

18 Mar 1970

5340-00-241-6594
Spring Tension Clip

002416594
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B020-05C: RNCC: 3 | RNVC: 2

7 Jul 1969

5340-00-197-5366
Intake Air Cleaner Bracket

001975366
11664234: RNCC: 3 | RNVC: 2
2940001975366: RNCC: 6 | RNVC: 9
5340001975366: RNCC: 6 | RNVC: 9

17 Jun 1970

5340-00-139-6833
Nut And Bolt Retainer

001396833
NAS578: RNCC: 3 | RNVC: 1
NAS578-20B: RNCC: 3 | RNVC: 2

4 Sep 1971

5340-00-200-8583
Door Hook And Eye

002008583
FFH111-F1601 12IN: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH111ANDTYPEF1601: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-4934
Rod End Connector

000694934
MS21255-6RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-055-2342
Loop Clamp

000552342
NASM21333: RNCC: 3 | RNVC: 1
MS21333-32: RNCC: 3 | RNVC: 2
MS21333-32: RNCC: 5 | RNVC: 9

1 Jun 1967

5340-01-039-8372
Dust And Moisture Seal Boot

010398372
12257222: RNCC: 3 | RNVC: 2
5975010398372: RNCC: 5 | RNVC: 9
5975010398372: RNCC: 6 | RNVC: 9
5340010398372: RNCC: 6 | RNVC: 9

26 Apr 1977

5340-00-209-7504
Butt Hinge

002097504
AA55586-4: RNCC: 2 | RNVC: 2
A-A-55586: RNCC: 4 | RNVC: 1
MS27966-4: RNCC: 5 | RNVC: 9
800: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-014-7574
Loop Clamp

010147574
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C24T: RNCC: 3 | RNVC: 2

5 Jan 1976

5340-01-407-7695
Snap-In Threaded Standoff

014077695
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6G48: RNCC: 3 | RNVC: 2

5 Feb 1995

5340-01-710-8427
Mounting Bracket

017108427
12664179: RNCC: 3 | RNVC: 2
12664179: RNCC: C | RNVC: 1

29 Jun 2023

5340-01-016-3342
Doorstop

010163342
FFH111-1324B: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
ANSI 156.16: RNCC: 5 | RNVC: 1
FF-H-111 TYPE L02052: RNCC: 5 | RNVC: 9

8 Feb 1976

5340-00-200-6556
Loop Clamp

002006556
12Z7003-5003: RNCC: 2 | RNVC: 2
836664: RNCC: 5 | RNVC: 9
651-4: RNCC: 5 | RNVC: 9
8192655: RNCC: 5 | RNVC: 9
CP1031-4: RNCC: 5 | RNVC: 9
A3044F4: RNCC: 5 | RNVC: 9
C3044F4-92: RNCC: 5 | RNVC: 9
4006: RNCC: 5 | RNVC: 9
A33144-4-92: RNCC: 5 | RNVC: 9
C33144-4-92: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-435-5696
Retaining Strap

014355696
SAE-AS9394: RNCC: 3 | RNVC: 1
MS9394-01: RNCC: 3 | RNVC: 2
MS9394-01: RNCC: 5 | RNVC: 9

28 Aug 1996

5340-01-434-1848
Loop Clamp

014341848
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C14-20S: RNCC: 3 | RNVC: 2

23 Jul 1996

5340-01-710-7320
Mounting Bracket

017107320
A1-55242D: RNCC: 3 | RNVC: 2

21 Jun 2023

5340-01-710-7927
Cushioning Pad

017107927
930636: RNCC: 3 | RNVC: 2

26 Jun 2023

5340-01-710-8317
Multiple Angle Bracket

017108317
13074154: RNCC: 3 | RNVC: 2

28 Jun 2023

5340-01-710-9690
Double Angle Bracket

017109690
12641968: RNCC: 3 | RNVC: 2
12641968: RNCC: 5 | RNVC: 2

11 Jul 2023

5340-01-710-9718
Mounting Plate

017109718
12558272: RNCC: 3 | RNVC: 2

12 Jul 2023

5340-01-710-9889
Mounting Bracket

017109889
3363513-12: RNCC: 3 | RNVC: 2
3363513: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-132-8853
Butt Hinge

011328853
MS35826-9A: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1
MS35826-9A: RNCC: 5 | RNVC: 9

5 Jun 1982

5340-00-309-8142
Retaining Strap

003098142
1505244: RNCC: 3 | RNVC: 9
1512381: RNCC: 5 | RNVC: 2
5298396: RNCC: 5 | RNVC: 2
1505244: RNCC: 5 | RNVC: 2
1505244: RNCC: 5 | RNVC: 9
1505244: RNCC: 5 | RNVC: 9
PC1505244: RNCC: 5 | RNVC: 9
1512381: RNCC: 5 | RNVC: 9
1505244: RNCC: C | RNVC: 1
1512381: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-563-2304
Manual Control Handle

015632304
443-8573: RNCC: 3 | RNVC: 2
2620785: RNCC: 5 | RNVC: 9

6 May 2008

5340-00-190-6812
Retaining Strap

001906812
NASM21314: RNCC: 3 | RNVC: 1
MS21314-18: RNCC: 3 | RNVC: 2
MS21314-18: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-188-0282
Turnbuckle

001880282
FFT791-TY1-FM1-CL4-3/8X6: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-188-0339
Turnbuckle

001880339
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1G 3/4X9: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

Load More Results