What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 15 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 15 of 1045

5340-00-290-7249
Dust And Moisture Seal Protective Cap-Plug

002907249
8528856: RNCC: 3 | RNVC: 2
6735707-23: RNCC: 3 | RNVC: 2
MIL-C-5501: RNCC: 4 | RNVC: 1
NAS834-131: RNCC: 5 | RNVC: 1
16: RNCC: 5 | RNVC: 2
RU51085: RNCC: 5 | RNVC: 9
917965: RNCC: 5 | RNVC: 9
SIZE16: RNCC: 5 | RNVC: 9
16: RNCC: 5 | RNVC: 9
RU51085: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-433-3253
Dust And Moisture Seal Protective Plug

004333253
NAS836: RNCC: 3 | RNVC: 1
NAS836-4A: RNCC: 3 | RNVC: 2
SP4S: RNCC: 5 | RNVC: 9
M5501/1-4: RNCC: 5 | RNVC: 9
45197-4: RNCC: 5 | RNVC: 9
2409-4: RNCC: 5 | RNVC: 9
5-4: RNCC: 5 | RNVC: 9
7-4: RNCC: 5 | RNVC: 9
SP4: RNCC: 5 | RNVC: 9
45197-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-434-9561
Loop Clamp

004349561
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C8KW: RNCC: 3 | RNVC: 2
MS21122CW8: RNCC: 5 | RNVC: 9
MS21122C8: RNCC: 5 | RNVC: 9
5340PL1780421: RNCC: 6 | RNVC: 9
5340PL0732105: RNCC: 6 | RNVC: 9

18 Feb 1972

5340-00-398-9396
Rod End Connector

003989396
BS1193PC94-95: RNCC: 3 | RNVC: 2
BS1162PC94-95: RNCC: 3 | RNVC: 2
BS5-1190PC94-95: RNCC: 3 | RNVC: 2
BS5-1716PC114-115: RNCC: 3 | RNVC: 2
BS5-1730PC114-115: RNCC: 3 | RNVC: 2
BS5-1732PC114-115: RNCC: 3 | RNVC: 2
BS5-1735PC94-105: RNCC: 3 | RNVC: 2
BS5-1738PC94-105: RNCC: 3 | RNVC: 2
BS5-1755PC94-95: RNCC: 3 | RNVC: 2
BS5-2021PC56-57: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-310-2143
Bow Handle

003102143
135-3: RNCC: 3 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH111: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-187-8177
Turnbuckle

001878177
FFT791-TY1-FM1-CL4-1/2X17 1/2: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-143-8861
Pad Eye

001438861
MS51930-1: RNCC: 2 | RNVC: 2
MS51930: RNCC: 4 | RNVC: 1
XX002-0873: RNCC: 5 | RNVC: 2

26 Jan 1970

5340-00-550-5036
Butt Hinge

005505036
MS20001P5-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
5340PL0733962: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-476-5158
Electrical-Mechanical Equipment Post

004765158
NAS1831: RNCC: 3 | RNVC: 1
8435: RNCC: 3 | RNVC: 2
NAS1831AC4C64: RNCC: 3 | RNVC: 2
8243-A-0632-17: RNCC: 5 | RNVC: 2
8435: RNCC: 5 | RNVC: 9
8243-A-0632-17: RNCC: 5 | RNVC: 9
5340PL1866838: RNCC: 6 | RNVC: 9

11 Jun 1971

5340-00-468-1450
Loop Clamp

004681450
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-03: RNCC: 3 | RNVC: 2
AS9349-03: RNCC: 3 | RNVC: 9
MS9349-03: RNCC: 5 | RNVC: 9
MS9349-03: RNCC: 5 | RNVC: 9
5340PL0930413: RNCC: 6 | RNVC: 9
AS9349: RNCC: C | RNVC: 1

28 Aug 1970

5340-00-584-6563
Loop Clamp

005846563
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122907: RNCC: 3 | RNVC: 2
674419: RNCC: 5 | RNVC: 1
MS122907: RNCC: 5 | RNVC: 9
5340PL0626856: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-576-9915
Loop Clamp

005769915
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF05: RNCC: 3 | RNVC: 2
AS21919WDF05: RNCC: 3 | RNVC: 9
MS21919WDF5: RNCC: 5 | RNVC: 9
5340PL0733119: RNCC: 6 | RNVC: 9
10464051: RNCC: 6 | RNVC: 9
MS21919WDF-5: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-522-8395
Spring Tension Clip

005228395
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-229: RNCC: 3 | RNVC: 2
100-300-11-9: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-229: RNCC: 5 | RNVC: 9
400902-3: RNCC: C | RNVC: 1
400902-2: RNCC: C | RNVC: 1
400902-3: RNCC: C | RNVC: 1

23 Aug 1974

5340-00-521-4479
Nut And Bolt Locking Plate

005214479
98-741: RNCC: 3 | RNVC: 2
447-1113: RNCC: 5 | RNVC: 2
9A7864: RNCC: 5 | RNVC: 2
8017F: RNCC: 5 | RNVC: 2
678075: RNCC: 5 | RNVC: 2
17DS36: RNCC: 5 | RNVC: 2
5214479: RNCC: 5 | RNVC: 2
98-741: RNCC: 5 | RNVC: 2
3GE0647A: RNCC: 5 | RNVC: 9
8017F: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-664-8141
Butt Hinge

006648141
MS20001P4-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
3CN33-165: RNCC: 5 | RNVC: 1
3N33-165: RNCC: 5 | RNVC: 1
MS20001P4-7200: RNCC: 5 | RNVC: 1
MS20001P4-7200: RNCC: 5 | RNVC: 9
MS20001P4-7200: RNCC: 5 | RNVC: 9
MS2001P4-738: RNCC: 5 | RNVC: 9
MS20001P4-350: RNCC: 5 | RNVC: 9
MS20001-4-300: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-413-0399
Mortise Lock Set

004130399
FFH106-181K: RNCC: 2 | RNVC: 2
FFH106: RNCC: 4 | RNVC: 1
FF-H-106: RNCC: 4 | RNVC: 1
BR260: RNCC: 5 | RNVC: 9
B260P: RNCC: 5 | RNVC: 9

6 May 1970

5340-00-410-6442
Angle Bracket

004106442
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-130: RNCC: 3 | RNVC: 2
MS9592-130: RNCC: 5 | RNVC: 9

20 Aug 1969

5340-00-463-7425
Spring Tension Clip

004637425
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-04C: RNCC: 3 | RNVC: 2
10117366: RNCC: 6 | RNVC: 9

26 Jan 1968

5340-00-462-4191
Loop Clamp

004624191
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-13N: RNCC: 3 | RNVC: 2

16 May 1969

5340-00-536-9549
Butt Hinge Leaf

005369549
344539R: RNCC: 3 | RNVC: 2
344539R: RNCC: 5 | RNVC: 2
5340PL2023453: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-634-7829
Loop Clamp

006347829
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122904: RNCC: 3 | RNVC: 2
10-90203-6: RNCC: 5 | RNVC: 1
6739841-6: RNCC: 5 | RNVC: 1
10-90203-6: RNCC: 5 | RNVC: 9
10-90203-6: RNCC: 5 | RNVC: 9
MS122904: RNCC: 5 | RNVC: 9
5340006347829: RNCC: 5 | RNVC: 9
5340PL0734743: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-598-0225
Loop Clamp

005980225
AN742-26: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
FS1714-26: RNCC: 5 | RNVC: 1
5340005980225: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-601-5974
Spring Tension Clip

006015974
73643-75X4PC6: RNCC: 3 | RNVC: 2
4264-354REVAPC13: RNCC: 5 | RNVC: 9
4264-354REVAPC13: RNCC: 5 | RNVC: 9
7864-299REVAPC5: RNCC: 5 | RNVC: 9
577-3801-1608793P42EBB: RNCC: 5 | RNVC: 9
585-501-1715136RP42EBB: RNCC: 5 | RNVC: 9
586-501-1718935RP42EBB: RNCC: 5 | RNVC: 9
586-501-1718940RP42EBB: RNCC: 5 | RNVC: 9
7964-259REVAPC5: RNCC: 5 | RNVC: 9
576-3801-1505727P42EBB: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-419-6568
Mortise Lock Set

004196568
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F81 GRADE 2: RNCC: 3 | RNVC: 2
400T: RNCC: 5 | RNVC: 2
836-462: RNCC: 5 | RNVC: 2
A520US26D: RNCC: 5 | RNVC: 9
53K7AB4CSTK605: RNCC: 5 | RNVC: 9
ANSI A156.2 F81 GRADE 2: RNCC: 5 | RNVC: 9
A520DLC26D: RNCC: 5 | RNVC: 9

2 Dec 1970

5340-00-570-3734
Sealing Plug Assembly

005703734
PLGA1870010A: RNCC: 3 | RNVC: 2
ST7M141D6S: RNCC: 5 | RNVC: 9
SP780-004: RNCC: 5 | RNVC: 9
PLGA1870010: RNCC: 5 | RNVC: 9
1870010: RNCC: 5 | RNVC: 9
SP780-004: RNCC: 5 | RNVC: 9
093-49831-6: RNCC: 5 | RNVC: 9
S8-187001: RNCC: 5 | RNVC: 9
187001: RNCC: 5 | RNVC: 9
093-49831-6: RNCC: 5 | RNVC: 9

1 Dec 1974

5340-00-531-7253
Loop Clamp

005317253
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D96: RNCC: 3 | RNVC: 2
AS7351D96: RNCC: 3 | RNVC: 9
AN735D96: RNCC: 5 | RNVC: 9
AS7351D96: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-393-4078
Clamp Bolt Assembly

003934078
M85731/1-7: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
500018: RNCC: 5 | RNVC: 1
ST9M454-4-3: RNCC: 5 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-7: RNCC: 5 | RNVC: 9
10117352: RNCC: 6 | RNVC: 9

5 Apr 1974

5340-00-335-4311
Retaining Band

003354311
676005: RNCC: 3 | RNVC: 2
7954233: RNCC: 5 | RNVC: 2
5340003354311: RNCC: 5 | RNVC: 9
2920003354311: RNCC: 6 | RNVC: 9

25 Jun 1969

5340-00-558-6030
Loop Clamp

005586030
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C18N: RNCC: 3 | RNVC: 2
MS9024-17: RNCC: 5 | RNVC: 9
5340005586030: RNCC: 5 | RNVC: 9
5340005586030: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-531-6985
Loop Clamp

005316985
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-23: RNCC: 3 | RNVC: 2
AN735-23: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-484-4442
Key Blank

004844442
1176: RNCC: 3 | RNVC: 2
5KW1: RNCC: 5 | RNVC: 2
176: RNCC: 5 | RNVC: 2
1268: RNCC: 5 | RNVC: 2
1-1063-NP: RNCC: 5 | RNVC: 2
PT1: RNCC: 5 | RNVC: 2
1063: RNCC: 5 | RNVC: 9
KW1: RNCC: 5 | RNVC: 9
176: RNCC: 5 | RNVC: 9
54KS: RNCC: 5 | RNVC: 9

12 Sep 1969

5340-00-434-9720
Loop Clamp

004349720
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C16KWX: RNCC: 3 | RNVC: 2
MS21122C16: RNCC: 5 | RNVC: 9

18 Feb 1972

5340-00-410-2982
Angle Bracket

004102982
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-132: RNCC: 3 | RNVC: 2
MS9592-132: RNCC: 5 | RNVC: 9

15 Aug 1969

5340-00-410-2986
Angle Bracket

004102986
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-374: RNCC: 3 | RNVC: 2
MS9592-374: RNCC: 5 | RNVC: 9

18 Aug 1969

5340-00-405-0767
Angle Bracket

004050767
SAE-AS9603: RNCC: 3 | RNVC: 1
MS9603-216: RNCC: 3 | RNVC: 2
MS9603-216: RNCC: 5 | RNVC: 9

7 Apr 1971

5340-00-517-5260
Helical Compression Spring Seat

005175260
5175260: RNCC: 3 | RNVC: 2
70RX88: RNCC: 5 | RNVC: 2
353328: RNCC: 5 | RNVC: 2
2530005175260: RNCC: 5 | RNVC: 9
10A1321: RNCC: 5 | RNVC: 9
10UK01253: RNCC: 5 | RNVC: 9
31789: RNCC: 5 | RNVC: 9
665996: RNCC: 5 | RNVC: 9
88438H: RNCC: 5 | RNVC: 9
353328: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-716-4661
Rod End Locking Retainer

007164661
NAS559: RNCC: 3 | RNVC: 1
NAS559-6: RNCC: 3 | RNVC: 2
NAS559-6: RNCC: 5 | RNVC: 1
NAS559-6: RNCC: 5 | RNVC: 9
NAS0559: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-538-6930
Spring Tension Clip

005386930
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-347: RNCC: 3 | RNVC: 2
416949-47: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-347: RNCC: 5 | RNVC: 9
M24066/2-147: RNCC: 5 | RNVC: 9

25 Sep 1974

5340-00-704-0775
Flush Catch

007040775
10106118: RNCC: 3 | RNVC: 2
529260C90187: RNCC: 5 | RNVC: 2
53002141: RNCC: 5 | RNVC: 2
918356-1C: RNCC: 5 | RNVC: 2
TQ-64003: RNCC: 5 | RNVC: 2
53002141: RNCC: 5 | RNVC: 2
2180869: RNCC: 5 | RNVC: 2
A20034-1: RNCC: 5 | RNVC: 2
53002141: RNCC: 5 | RNVC: 2
TQ-64001: RNCC: 5 | RNVC: 2

1 Jan 1961

5340-00-578-8262
Spring Tension Clip

005788262
57A5A209-1: RNCC: 3 | RNVC: 2
691-20-5212: RNCC: 3 | RNVC: 2
100-200-5: RNCC: 3 | RNVC: 2
908C913-2: RNCC: 5 | RNVC: 2
57A5A209-1: RNCC: 5 | RNVC: 2
CP35-1-41E0052: RNCC: 5 | RNVC: 2
126-0001-012: RNCC: 5 | RNVC: 2
503/4/04126/002: RNCC: 5 | RNVC: 2
8195500: RNCC: 5 | RNVC: 2
100-200-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-544-3620
Support Hook

005443620
439507-01901: RNCC: 3 | RNVC: 2
214-1025P2: RNCC: 5 | RNVC: 2
203-24-4: RNCC: 5 | RNVC: 2
43-9507-01: RNCC: 5 | RNVC: 2
439507-01-901: RNCC: 5 | RNVC: 2
107158-1: RNCC: 5 | RNVC: 2
38289: RNCC: 5 | RNVC: 2
127-0147-0012: RNCC: 5 | RNVC: 9
70-757716-1: RNCC: 5 | RNVC: 9
37901400003: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-682-1870
Loop Clamp

006821870
MS9025-28: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-598-0146
Loop Clamp

005980146
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG-06: RNCC: 3 | RNVC: 2
821VN0621: RNCC: 5 | RNVC: 2
1276-19-284: RNCC: 5 | RNVC: 2
MS21919WDG6: RNCC: 5 | RNVC: 2
P33750: RNCC: 5 | RNVC: 2
301-110512: RNCC: 5 | RNVC: 2
MS21919WDG6: RNCC: 5 | RNVC: 2
MS21919DG6: RNCC: 5 | RNVC: 2
9463105806: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-515-1375
Loop Clamp

005151375
SAE-AS1553: RNCC: 3 | RNVC: 1
AS3257-02: RNCC: 3 | RNVC: 2
AS3257-02: RNCC: 3 | RNVC: 9
535D6: RNCC: 5 | RNVC: 9
327B641P004: RNCC: 5 | RNVC: 9
327B641P004: RNCC: 5 | RNVC: 9
115C6011P2: RNCC: 5 | RNVC: 9
389-4: RNCC: 5 | RNVC: 9
277398: RNCC: 5 | RNVC: 9
TFD91: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-775-5268
Loop Clamp

007755268
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C17KH: RNCC: 3 | RNVC: 2
MS9350-16: RNCC: 5 | RNVC: 9

25 Mar 1968

5340-00-634-6871
Loop Clamp

006346871
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C21N: RNCC: 3 | RNVC: 2
6739842-23: RNCC: 5 | RNVC: 2
6739842-23: RNCC: 5 | RNVC: 2
MS9024-20: RNCC: 5 | RNVC: 9
MS9024-20: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-576-2345
Threaded Rod End

005762345
AN490HT6P: RNCC: 3 | RNVC: 2
AN490HT6P: RNCC: 3 | RNVC: 9
MIL-DTL-45918: RNCC: 4 | RNVC: 1
AS49011: RNCC: 5 | RNVC: 2
AS49011: RNCC: 5 | RNVC: 9
AN490-6: RNCC: 5 | RNVC: 9
AN490HT6P: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-632-1561
Angle Bracket

006321561
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-050: RNCC: 3 | RNVC: 2
MS9600-050: RNCC: 5 | RNVC: 2
MS9600-050: RNCC: 5 | RNVC: 9

21 Mar 1975

5340-00-719-4601
Loop Clamp

007194601
180372: RNCC: 3 | RNVC: 2
2207-797: RNCC: 5 | RNVC: 2
180372: RNCC: 5 | RNVC: 2
60215677: RNCC: 5 | RNVC: 2
70467: RNCC: 5 | RNVC: 2
10086653: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-519-5506
Rod End Locking Retainer

005195506
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K6C: RNCC: 3 | RNVC: 2
NAS1193-6C: RNCC: 5 | RNVC: 9
10117388: RNCC: 6 | RNVC: 9
5340PL1037245: RNCC: 6 | RNVC: 9

11 Jun 1969

5340-00-498-0574
Spring Tension Clip

004980574
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-024-08C: RNCC: 3 | RNVC: 2
6007-62C: RNCC: 5 | RNVC: 2
6007-62C: RNCC: 5 | RNVC: 9

10 Oct 1969

5340-00-664-9175
Retaining Strap

006649175
NASM760: RNCC: 3 | RNVC: 1
MS35140-10: RNCC: 3 | RNVC: 2
120874: RNCC: 5 | RNVC: 1
120874: RNCC: 5 | RNVC: 1
120874: RNCC: 5 | RNVC: 1
A1813: RNCC: 5 | RNVC: 1
V6453: RNCC: 5 | RNVC: 1
SP1276: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9
MS35140-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-515-0595
Loop Clamp

005150595
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG36: RNCC: 3 | RNVC: 2
AS21919WDG36: RNCC: 3 | RNVC: 9
137619329: RNCC: 5 | RNVC: 2
2822779: RNCC: 5 | RNVC: 2
301-110834: RNCC: 5 | RNVC: 2
2822779: RNCC: 5 | RNVC: 9
Z00.N7141071536: RNCC: 5 | RNVC: 9
MS21919D36: RNCC: 5 | RNVC: 9
AN742D38CB: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-543-3934
Loop Clamp

005433934
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R8: RNCC: 3 | RNVC: 2
MS25281-R8: RNCC: 3 | RNVC: 9
MS25281-8: RNCC: 5 | RNVC: 2
54B7259H07: RNCC: 5 | RNVC: 2
4116200-348: RNCC: 5 | RNVC: 2
MS25281-R8: RNCC: 5 | RNVC: 9
PP7: RNCC: 5 | RNVC: 9
5340PL0866577: RNCC: 6 | RNVC: 9
457-5695: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-495-3207
Retaining Strap

004953207
NASM21315: RNCC: 3 | RNVC: 1
MS21315-1: RNCC: 3 | RNVC: 2
FFS760: RNCC: 5 | RNVC: 9
MS21315-1: RNCC: 5 | RNVC: 9

28 Jun 1971

5340-00-664-3775
Loop Clamp

006643775
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122922: RNCC: 3 | RNVC: 2
MS122922: RNCC: 5 | RNVC: 9
MS122922: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-721-5315
Loop Clamp

007215315
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R5: RNCC: 3 | RNVC: 2
MS25281-R5: RNCC: 3 | RNVC: 9
MS25281-R5: RNCC: 5 | RNVC: 2
MIL-S-23190: RNCC: 5 | RNVC: 9
MS25281-5: RNCC: 5 | RNVC: 9
5340007215315: RNCC: 5 | RNVC: 9
MS25281-R5: RNCC: 5 | RNVC: 9
10117436: RNCC: 6 | RNVC: 9
MS25281R5: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-598-3633
Threaded Rod End

005983633
AN490HT8: RNCC: 3 | RNVC: 2
MIL-DTL-45918: RNCC: 4 | RNVC: 1
AN490HT8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-480-9073
Loop Clamp

004809073
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-28N: RNCC: 3 | RNVC: 2
10117370: RNCC: 6 | RNVC: 9

14 Jun 1974

5340-00-530-5357
Rod End Clevis

005305357
AN665-34R: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1
AN665-34R: RNCC: 5 | RNVC: 2
12047: RNCC: 5 | RNVC: 9
5340PL2028128: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-546-2715
Hinged Hasp

005462715
FFH111-1405: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
ANSI/BHMA A156.20: RNCC: 5 | RNVC: 1
FFH111ATYPE1405: RNCC: 5 | RNVC: 9
1911PS: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-616-4400
Loop Clamp

006164400
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122906: RNCC: 3 | RNVC: 2
6739841-8: RNCC: 5 | RNVC: 1
6739841-8: RNCC: 5 | RNVC: 1
9463105406: RNCC: 5 | RNVC: 2
6739841-8: RNCC: 5 | RNVC: 9
5340006164400: RNCC: 5 | RNVC: 9
MS122906: RNCC: 5 | RNVC: 9
MS122906: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-664-8163
Loop Clamp

006648163
SAE-AS21919: RNCC: 3 | RNVC: 1
5096D5: RNCC: 3 | RNVC: 2
115-10-13: RNCC: 3 | RNVC: 2
AS21919WDG11: RNCC: 3 | RNVC: 2
4116200-113: RNCC: 5 | RNVC: 2
2822707: RNCC: 5 | RNVC: 2
MS21919WDG11: RNCC: 5 | RNVC: 2
301-110513: RNCC: 5 | RNVC: 2
AS21919WDG11: RNCC: 5 | RNVC: 2
8920988037: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-497-3564
Plug Button

004973564
142142: RNCC: 3 | RNVC: 2
9150282: RNCC: 3 | RNVC: 2
142142: RNCC: 5 | RNVC: 2
10013-08530: RNCC: 5 | RNVC: 2
SS48154: RNCC: 5 | RNVC: 9
SS48154K2220: RNCC: 5 | RNVC: 9
142142: RNCC: 5 | RNVC: 9
50704: RNCC: 5 | RNVC: 9
BS48154: RNCC: 5 | RNVC: 9
SS48154K2215: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-686-1302
Loop Clamp

006861302
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P7N: RNCC: 3 | RNVC: 2
710876-7: RNCC: C | RNVC: 1
HW-C0003-013: RNCC: C | RNVC: 1
610-0107: RNCC: C | RNVC: 1
630: RNCC: E | RNVC: 8

1 Jan 1961

5340-00-726-0785
Retaining Strap

007260785
NASM21315: RNCC: 3 | RNVC: 1
MS21315-32: RNCC: 3 | RNVC: 2
FF-S-760: RNCC: 5 | RNVC: 9
MS21315-32: RNCC: 5 | RNVC: 9

23 Feb 1968

5340-00-560-9262
Loop Clamp

005609262
54967-13: RNCC: 3 | RNVC: 2
HP13N: RNCC: 3 | RNVC: 2
1997305PC5: RNCC: 3 | RNVC: 2
CP30-1-11-13A: RNCC: 3 | RNVC: 2
HP13N: RNCC: 3 | RNVC: 2
9001464: RNCC: 3 | RNVC: 2
1019760-013: RNCC: 5 | RNVC: 2
CP30-1-11-13A: RNCC: 5 | RNVC: 2
HP13N: RNCC: 5 | RNVC: 2
HP13N: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-662-9756
Loop Clamp

006629756
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C24N: RNCC: 3 | RNVC: 2
MS9024-23: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-508-6197
Retaining Strap

005086197
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W55N: RNCC: 3 | RNVC: 2

26 Jul 1974

5340-00-776-1100
Loop Clamp

007761100
NASM21322: RNCC: 3 | RNVC: 1
MS21322-44: RNCC: 3 | RNVC: 2
MS21322-44: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-598-3616
Loop Clamp

005983616
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-52: RNCC: 3 | RNVC: 2
AS7351-52: RNCC: 3 | RNVC: 9
AS7351-52: RNCC: 5 | RNVC: 9
AN735-52: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-480-9010
Loop Clamp

004809010
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-42N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-480-9932
Retaining Strap

004809932
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16W34N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-820-6058
Loop Clamp

008206058
MS25281R15: RNCC: 2 | RNVC: 2
SAE-AS25281: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
10117467: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-759-3574
Loop Clamp

007593574
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-18N: RNCC: 3 | RNVC: 2

7 Apr 1972

5340-00-837-1055
Support Hook

008371055
1965458-1: RNCC: 1 | RNVC: 2
398-001-9002: RNCC: 3 | RNVC: 2
905273-007: RNCC: 3 | RNVC: 2
202-392: RNCC: 3 | RNVC: 2
60040P1: RNCC: 5 | RNVC: 2
164-0003-000: RNCC: 5 | RNVC: 2
HDH2: RNCC: 5 | RNVC: 2
21866: RNCC: 5 | RNVC: 2
HDH&2: RNCC: C | RNVC: 1
HD2I: RNCC: C | RNVC: 1

1 Jan 1960

NSN 5340-00-838-5267 008385267 PADLOCK SET

5340-00-838-5267
Padlock Set

008385267
AA59486-1AB20S2: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
MS21313-126: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-809-5127
Loop Clamp

008095127
NASM21333: RNCC: 3 | RNVC: 1
MS21333-38: RNCC: 3 | RNVC: 2
MS21333-38: RNCC: 5 | RNVC: 9
5340008095127: RNCC: 5 | RNVC: 9
5340008095127: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-809-7993
Loop Clamp

008097993
MS9025-26: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
5340008097993: RNCC: 5 | RNVC: 9
5340008097993: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-804-1229
Dust And Moisture Seal Protective Plug

008041229
NAS836: RNCC: 3 | RNVC: 1
NAS836-2A: RNCC: 3 | RNVC: 2
MILC5501TYPE3CLASS3SIZE2: RNCC: 5 | RNVC: 9
M5501/1-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-805-7631
Clamp Bolt Assembly

008057631
NAS573: RNCC: 3 | RNVC: 1
NAS573-10P: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-804-1243
Dust And Moisture Seal Protective Plug

008041243
NAS847: RNCC: 3 | RNVC: 1
NAS842-6A: RNCC: 3 | RNVC: 2
M5501/2-6: RNCC: 5 | RNVC: 9
MIL-C-5501/2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-801-5336
Nut And Bolt Retainer

008015336
NAS578: RNCC: 3 | RNVC: 1
NAS578-16A: RNCC: 3 | RNVC: 2
2577-162RET: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-801-2957
Bail Handle

008012957
MS18012-5: RNCC: 2 | RNVC: 2
MS18012: RNCC: 4 | RNVC: 1
5340008012957: RNCC: 5 | RNVC: 9
60-191: RNCC: 5 | RNVC: 9
5340008012957: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-779-5620
Loop Clamp

007795620
NASM21333: RNCC: 3 | RNVC: 1
MS21333-6: RNCC: 3 | RNVC: 2
MS21333-6: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-776-8809
Loop Clamp

007768809
NASM21333: RNCC: 3 | RNVC: 1
MS21333-5: RNCC: 3 | RNVC: 2
SK-7002-28: RNCC: 5 | RNVC: 1
MS21333-5: RNCC: 5 | RNVC: 9
53407768809: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-764-9559
Spring Tension Clip

007649559
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-056-08C: RNCC: 3 | RNVC: 2
NAS1464-056-08T: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-484-0932
Loop Clamp

004840932
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-22N: RNCC: 3 | RNVC: 2
10117374: RNCC: 6 | RNVC: 9

18 Jun 1974

5340-00-834-1230
Loop Clamp

008341230
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C14N: RNCC: 3 | RNVC: 2
5340008341230: RNCC: 5 | RNVC: 9
MS9024-13: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-853-9862
Nut And Bolt Retainer

008539862
NAS578: RNCC: 3 | RNVC: 1
NAS578-9B: RNCC: 3 | RNVC: 2
3320-098RET: RNCC: 5 | RNVC: 9
NAS578-10B: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-940-8036
Loop Clamp

009408036
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K7EN: RNCC: 3 | RNVC: 2
NAS1397K7N: RNCC: 5 | RNVC: 9

11 Dec 1965

5340-00-839-4610
Swivel Caster

008394610
NASM24373: RNCC: 3 | RNVC: 1
MS24373-6WSF: RNCC: 3 | RNVC: 2
12124-6WSF: RNCC: 5 | RNVC: 1
C31S12-HM-6-6WSF: RNCC: 5 | RNVC: 1
1654-D-6WSF: RNCC: 5 | RNVC: 9
MS24373-6WSF: RNCC: 5 | RNVC: 9
11712-6WSF: RNCC: 5 | RNVC: 9
NASM24373-6WSF: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-847-2605
Mortise Lock Set

008472605
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F82A GRADE 1: RNCC: 3 | RNVC: 2
X571DL: RNCC: 5 | RNVC: 9
FFH106SERIES161SET161TA: RNCC: 5 | RNVC: 9
ANSI A156.2 F82 GRADE 1: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-942-2206
Loop Clamp

009422206
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122909: RNCC: 3 | RNVC: 2
AS122909: RNCC: 3 | RNVC: 9
AS122909: RNCC: 5 | RNVC: 9
MS122909: RNCC: 5 | RNVC: 9
MS1229-09: RNCC: C | RNVC: 1

25 Dec 1965

5340-00-856-8118
Rod End Locking Retainer

008568118
NAS1193: RNCC: 3 | RNVC: 1
NAS1193-4C: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-896-1082
Loop Clamp

008961082
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F8: RNCC: 3 | RNVC: 2
AS25281-F8: RNCC: 3 | RNVC: 9
B70158: RNCC: 5 | RNVC: 2
AS25281-F8: RNCC: 5 | RNVC: 9
MS25281F8: RNCC: 5 | RNVC: 9
5340008961082: RNCC: 5 | RNVC: 9
457-5714: RNCC: 6 | RNVC: 9
MS25281-F8: RNCC: C | RNVC: 1

3 Feb 1967

5340-01-035-4456
Loop Clamp

010354456
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT6M: RNCC: 3 | RNVC: 2

10 Feb 1977

5340-01-034-3451
Electrical-Mechanical Equipment Post

010343451
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B04: RNCC: 3 | RNVC: 2
8211-A-0440-1B: RNCC: 5 | RNVC: 2
8211-A-0440-1B: RNCC: 5 | RNVC: 9
703896: RNCC: C | RNVC: 1
8211A0440-1B: RNCC: C | RNVC: 1

25 Jan 1977

5340-00-891-3410
Loop Clamp

008913410
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F7: RNCC: 3 | RNVC: 2
A07996: RNCC: 5 | RNVC: 2
MS25281F7: RNCC: 5 | RNVC: 9
5340008913410: RNCC: 5 | RNVC: 9
457-5713: RNCC: 6 | RNVC: 9
401-4694900 ITE: RNCC: C | RNVC: 1
MS25281-F7: RNCC: C | RNVC: 1

20 Jan 1967

5340-00-792-0943
Line Supporting Strap

007920943
TY33M: RNCC: 3 | RNVC: 2
145-4510955-63: RNCC: 5 | RNVC: 2
918334-2: RNCC: 5 | RNVC: 2
30-00105-002: RNCC: 5 | RNVC: 2
33564-004: RNCC: 5 | RNVC: 2
3522 500 40252: RNCC: 5 | RNVC: 2
27170-584: RNCC: 5 | RNVC: 2
BC1M-S4-M: RNCC: 5 | RNVC: 2
68201024001: RNCC: 5 | RNVC: 2
TY33M: RNCC: 5 | RNVC: 9

17 Jun 1968

5340-00-843-7825
Loop Clamp

008437825
NASM21333: RNCC: 3 | RNVC: 1
MS21333-68: RNCC: 3 | RNVC: 2
MS21333-68: RNCC: 5 | RNVC: 9
5342PL0734326: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-838-5628
Helical Compression Spring Seat

008385628
3006505: RNCC: 3 | RNVC: 2
9682011304: RNCC: 5 | RNVC: 2
5340PL1552304: RNCC: 6 | RNVC: 9

12 Dec 1966

5340-00-823-5076
Loop Clamp

008235076
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D34: RNCC: 3 | RNVC: 2
AN735D34: RNCC: 3 | RNVC: 9
AN735D34: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-814-0757
Bail Handle

008140757
H980LS2RGCE: RNCC: 3 | RNVC: 2
H980LS1R: RNCC: 3 | RNVC: 9
H980LS1RGCE: RNCC: 5 | RNVC: 9
H980LS1R: RNCC: C | RNVC: 1
5-4-4966: RNCC: C | RNVC: 1

27 Mar 1968

5340-00-811-7079
Loop Clamp

008117079
MS9024-10: RNCC: 2 | RNVC: 2
MS9024: RNCC: 4 | RNVC: 1
5304008117079: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-016-0813
Sealing Plug Assembly

010160813
ST7M141D9L: RNCC: 3 | RNVC: 2
STD288-23: RNCC: 5 | RNVC: 2
272R095-281L: RNCC: 5 | RNVC: 2
PLGA2811010: RNCC: 5 | RNVC: 2
649-052-014-0: RNCC: 5 | RNVC: 2
920250-28AL: RNCC: 5 | RNVC: 2
2407LA07: RNCC: 5 | RNVC: 2
PLGA2811010A: RNCC: 5 | RNVC: 2
S8-281101: RNCC: 5 | RNVC: 2
STD288-23: RNCC: 5 | RNVC: 9

4 Feb 1976

5340-00-969-4418
Spring Tension Clip

009694418
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-020-04C: RNCC: 3 | RNVC: 2
6013-55C: RNCC: 5 | RNVC: 9
10117516: RNCC: 6 | RNVC: 9

15 Jun 1966

5340-00-827-4417
Angle Bracket

008274417
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743B13: RNCC: 3 | RNVC: 2
AN743B13: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-843-5740
Bail Handle

008435740
NASM35793: RNCC: 3 | RNVC: 1
MS35793-1: RNCC: 3 | RNVC: 2
MS35793-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-841-5469
Loop Clamp

008415469
MS9025-19: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
1102G36-019: RNCC: 5 | RNVC: 1
959E461-030: RNCC: 5 | RNVC: 1
A06475: RNCC: 5 | RNVC: 2
1102G36-019: RNCC: 5 | RNVC: 9
959E461-030: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-838-0334
Butt Hinge

008380334
MS20257P6-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
AN257P6: RNCC: 5 | RNVC: 1
MS20257P6-7200: RNCC: 5 | RNVC: 1
532975: RNCC: 5 | RNVC: 1
AN257P6-7200: RNCC: 5 | RNVC: 9
MS20257P6-1400: RNCC: 5 | RNVC: 9
MS20257-6-1406: RNCC: 5 | RNVC: 9
MS20257-6-1606: RNCC: 5 | RNVC: 9
MS20257P6-3910: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-820-6093
Loop Clamp

008206093
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R22: RNCC: 3 | RNVC: 2
MS25281R22: RNCC: 5 | RNVC: 9
MS25281F22: RNCC: 5 | RNVC: 9
5340PL0901287: RNCC: 6 | RNVC: 9
MS25281-R22: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-968-2877
Bow Handle

009682877
2385-3-14: RNCC: 3 | RNVC: 9
715010-019: RNCC: 5 | RNVC: 2
612-0056: RNCC: 5 | RNVC: 2
322886P1: RNCC: 5 | RNVC: 2
322886: RNCC: 5 | RNVC: 2
9A45A64: RNCC: 5 | RNVC: 9
612-0056: RNCC: 5 | RNVC: 9
322886P1: RNCC: 5 | RNVC: 9
322886: RNCC: 5 | RNVC: 9
415-2385-03-14: RNCC: 5 | RNVC: 9

10 Jun 1966

5340-00-942-2203
Loop Clamp

009422203
SAE-AS9391: RNCC: 3 | RNVC: 1
MS9391-10: RNCC: 3 | RNVC: 2
MS9391-10: RNCC: 3 | RNVC: 9
MS9391-10: RNCC: 5 | RNVC: 9

25 Dec 1965

5340-00-909-3352
Loop Clamp

009093352
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R9B: RNCC: 3 | RNVC: 2
NAS1397R9: RNCC: 5 | RNVC: 9

13 Jul 1966

5340-00-973-8743
Loop Clamp

009738743
NASM21322: RNCC: 3 | RNVC: 1
MS21322-11: RNCC: 3 | RNVC: 2
MS21322-11: RNCC: 5 | RNVC: 9

10 Oct 1966

5340-01-015-9807
Retaining Strap

010159807
101-094-302: RNCC: 3 | RNVC: 2
101-094-302: RNCC: 5 | RNVC: 9
12665630: RNCC: 7 | RNVC: 2

31 Jan 1976

5340-00-969-6501
Loop Clamp

009696501
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R7B: RNCC: 3 | RNVC: 2
13152916-8: RNCC: 5 | RNVC: 1
NAS1397R7: RNCC: 5 | RNVC: 1
10031-6: RNCC: 5 | RNVC: 9
10031-6: RNCC: 5 | RNVC: 9
947015-2071: RNCC: 5 | RNVC: 9
711625-47: RNCC: 5 | RNVC: 9
12Z7003-6337: RNCC: 5 | RNVC: 9
ST310002-7: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-004-0117
Loop Clamp

010040117
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D3-8NW: RNCC: 3 | RNVC: 2

15 May 1975

5340-00-999-3996
Loop Clamp

009993996
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P9N: RNCC: 3 | RNVC: 2
33630P7: RNCC: 5 | RNVC: 2
22CC50D0562: RNCC: C | RNVC: 1

11 Apr 1966

5340-00-865-9496
Rod End Clevis

008659496
8329491: RNCC: 3 | RNVC: 2
14160A: RNCC: 3 | RNVC: 2
MS35812-2: RNCC: 3 | RNVC: 2
116383: RNCC: 5 | RNVC: 1
A10903: RNCC: 5 | RNVC: 2
116383: RNCC: 5 | RNVC: 2
116383: RNCC: 5 | RNVC: 2
116383: RNCC: 5 | RNVC: 2
116383: RNCC: 5 | RNVC: 2
A22148: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-00-944-8036
Dust And Moisture Seal Protective Cap

009448036
MT90140: RNCC: 3 | RNVC: 2
10541481: RNCC: 3 | RNVC: 2
10541418: RNCC: 5 | RNVC: 2
10541481: RNCC: 5 | RNVC: 9
10541481: RNCC: 5 | RNVC: 9
5340009448036: RNCC: 6 | RNVC: 9

4 Mar 1966

5340-01-014-9898
Angle Bracket

010149898
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-035: RNCC: 3 | RNVC: 2
MS9593-035: RNCC: 5 | RNVC: 9

13 Jan 1976

5340-00-993-4655
Spring Tension Clip

009934655
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-343: RNCC: 3 | RNVC: 2
336253-43: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-343: RNCC: 5 | RNVC: 9
6018-99A: RNCC: 5 | RNVC: 9
100-200-12-0: RNCC: C | RNVC: 1
54B7054H12: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-993-1461
Butt Hinge Leaf

009931461
MS20257HP2-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
LS35169HP2-7200: RNCC: 5 | RNVC: 1
MS20257HP2-7200: RNCC: 5 | RNVC: 1
MS20257HP2: RNCC: 5 | RNVC: 1
MS20257HP2-1200: RNCC: 5 | RNVC: 1
MS20257X92-194: RNCC: 5 | RNVC: 9
MS20257XP2-194: RNCC: 5 | RNVC: 9
MS20257HP2-300: RNCC: 5 | RNVC: 9
10117527: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-898-9829
Expansion Plug

008989829
A52420-18: RNCC: 2 | RNVC: 2
A-A-52420: RNCC: 4 | RNVC: 1
119168: RNCC: 5 | RNVC: 1
119168: RNCC: 5 | RNVC: 1
172602: RNCC: 5 | RNVC: 1
11580784: RNCC: 5 | RNVC: 1
119168: RNCC: 5 | RNVC: 9
172602: RNCC: 5 | RNVC: 9
5340008989829: RNCC: 5 | RNVC: 9
MS35648-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-951-6830
Spring Tension Clip

009516830
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-309: RNCC: 3 | RNVC: 2
MS17160-9: RNCC: 5 | RNVC: 2
336253-9: RNCC: 5 | RNVC: 2
1018990-009: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
1018990-009: RNCC: 5 | RNVC: 9
M24066/2-309: RNCC: 5 | RNVC: 9
Y63E840015-001: RNCC: C | RNVC: 1
416949-9: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-995-5581
Spring Tension Clip

009955581
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-345: RNCC: 3 | RNVC: 2
100-200-15-0: RNCC: 5 | RNVC: 1
336253-45: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-345: RNCC: 5 | RNVC: 9
6021-33A: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-901-8132
Loop Clamp

009018132
NASM21334: RNCC: 3 | RNVC: 1
MS21334-26: RNCC: 3 | RNVC: 2
MS21334-26: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-828-4775
Grooved Clamp Coupling

008284775
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-07BR: RNCC: 3 | RNVC: 2
45H14-3-262-1: RNCC: 5 | RNVC: 2
6132A4M-262Z: RNCC: 5 | RNVC: 2
AS5355/1: RNCC: 5 | RNVC: 9
MS27114-07R: RNCC: 5 | RNVC: 9
AS5355/1: RNCC: 5 | RNVC: 9

28 Aug 1967

5340-00-893-1938
Spring Tension Clip

008931938
10884759: RNCC: 3 | RNVC: 2
2590008931938: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-985-6732
Loop Clamp

009856732
NASM21333: RNCC: 3 | RNVC: 1
MS21333-49: RNCC: 3 | RNVC: 2
125921: RNCC: 5 | RNVC: 1
MS21333-49: RNCC: 5 | RNVC: 9
5340009856732: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-989-9224
Loop Clamp

009899224
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R6: RNCC: 3 | RNVC: 2
3: RNCC: 5 | RNVC: 1
MS25281R6: RNCC: 5 | RNVC: 2
0001619: RNCC: 5 | RNVC: 2
1946644-33: RNCC: 5 | RNVC: 2
NMC CL141N-R6: RNCC: 5 | RNVC: 2
711625-5: RNCC: 5 | RNVC: 2
214-1043P5: RNCC: 5 | RNVC: 2
214-1043P5: RNCC: 5 | RNVC: 2

1 Jan 1960

5340-01-032-3061
Vent Plug

010323061
21024: RNCC: 3 | RNVC: 2
21024: RNCC: 5 | RNVC: 2
03223061: RNCC: 5 | RNVC: 2

12 Dec 1976

5340-01-033-3088
Retaining Strap

010333088
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-32N: RNCC: 3 | RNVC: 2
10117558: RNCC: 6 | RNVC: 9

2 Jan 1977

5340-00-997-9160
Bow Handle

009979160
317841-1: RNCC: 1 | RNVC: 2
GH500AC1: RNCC: 3 | RNVC: 2
10682388: RNCC: 3 | RNVC: 2
115013-101: RNCC: 5 | RNVC: 2
128C855H01: RNCC: 5 | RNVC: 2
415-2720-01-22-00: RNCC: 5 | RNVC: 9
2720-1: RNCC: 5 | RNVC: 9
128C855H01: RNCC: 5 | RNVC: 9
1019812-001: RNCC: C | RNVC: 1
883B036661: RNCC: C | RNVC: 1

18 Nov 1966

5340-00-915-2364
Rod End Locking Retainer

009152364
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K18C: RNCC: 3 | RNVC: 2
10117500: RNCC: 6 | RNVC: 9

6 Jul 1966

5340-00-934-9784
Loop Clamp

009349784
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F9: RNCC: 3 | RNVC: 2
401-6357230-62: RNCC: 5 | RNVC: 1
MS25281-9: RNCC: 5 | RNVC: 9
MS25281F9: RNCC: 5 | RNVC: 9
MS25281-F9: RNCC: C | RNVC: 1

3 Mar 1967

5340-01-018-8984
Loop Clamp

010188984
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C11K: RNCC: 3 | RNVC: 2

1 Apr 1976

5340-00-930-1754
Loop Clamp

009301754
NASM21334: RNCC: 3 | RNVC: 1
MS21334-2: RNCC: 3 | RNVC: 2
MS21334-2: RNCC: 5 | RNVC: 9
5340009301754: RNCC: 5 | RNVC: 9

27 Apr 1966

5340-00-954-3134
Loop Clamp

009543134
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R7: RNCC: 3 | RNVC: 2
121539-6: RNCC: 5 | RNVC: 1
4116200-546: RNCC: 5 | RNVC: 2
MS25281-R7: RNCC: 5 | RNVC: 9
MS25281-R7: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MS25281-7: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
5340009543134: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-023-8879
Loop Clamp

010238879
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D40K: RNCC: 3 | RNVC: 2

28 Jun 1976

5340-01-005-0574
Angle Bracket

010050574
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-126: RNCC: 3 | RNVC: 2
MS9593-126: RNCC: 5 | RNVC: 9
M1252-137010: RNCC: 6 | RNVC: 9

19 Jun 1975

5340-00-889-8512
Loop Clamp

008898512
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C16KH: RNCC: 3 | RNVC: 2
MS9350-15: RNCC: 5 | RNVC: 9

12 Apr 1968

5340-01-043-8421
Spring Tension Clip

010438421
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B034-05N: RNCC: 3 | RNVC: 2

1 Jul 1977

5340-01-033-3269
Rod End Locking Retainer

010333269
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K8CP: RNCC: 3 | RNVC: 2

2 Jan 1977

5340-01-094-3104
Rod End Clevis

010943104
NASM27120: RNCC: 3 | RNVC: 1
MS27120-35: RNCC: 3 | RNVC: 2
MS27120-35: RNCC: 5 | RNVC: 9

7 May 1980

5340-01-054-1578
Butt Hinge

010541578
A-A-55596B: RNCC: 2 | RNVC: 2
A-A-55596: RNCC: 4 | RNVC: 1
MS35831-6D: RNCC: 5 | RNVC: 9
MIL-H-9850: RNCC: 5 | RNVC: 9
MS35831-6D: RNCC: 5 | RNVC: 9

15 Jan 1978

5340-01-080-5509
Spring Tension Clip

010805509
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-226: RNCC: 3 | RNVC: 2
M24066/2-026: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-226: RNCC: 5 | RNVC: 9

27 Jul 1979

5340-01-067-7180
Turnbuckle

010677180
NAS1047: RNCC: 3 | RNVC: 1
NAS1047-12-090: RNCC: 3 | RNVC: 2

5 Nov 1978

5340-01-055-4196
Butt Hinge

010554196
MS35825-10D: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1
MS35825-10D: RNCC: 5 | RNVC: 1
MS35825-2D: RNCC: 5 | RNVC: 9

4 Feb 1978

5340-01-048-9666
Angle Bracket

010489666
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-134: RNCC: 3 | RNVC: 2
MS9600-134: RNCC: 5 | RNVC: 2
MS9600-134: RNCC: 5 | RNVC: 9

8 Oct 1977

5340-01-041-6834
Loop Clamp

010416834
MS21122-34: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
EAB700D34: RNCC: 5 | RNVC: 1

28 May 1977

5340-01-037-7276
Electronic Equipment Hardware Kit

010377276
4860M: RNCC: 3 | RNVC: 9
DG9023-21: RNCC: 5 | RNVC: 2
137666109: RNCC: 5 | RNVC: 2
IMA-005: RNCC: 5 | RNVC: 2
CV0070-001: RNCC: 5 | RNVC: 2
EM-C0040-001: RNCC: 5 | RNVC: 2
343-900-001: RNCC: 5 | RNVC: 2
4660: RNCC: 5 | RNVC: 9
123-001-0001-01: RNCC: 5 | RNVC: 9
4660: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-01-033-8306
Loop Clamp

010338306
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-08: RNCC: 3 | RNVC: 2
MS9349-08: RNCC: 5 | RNVC: 9

11 Jan 1977

5340-01-049-9564
Loop Clamp

010499564
NASM21334: RNCC: 3 | RNVC: 1
MS21334-25: RNCC: 3 | RNVC: 2
NASM21334-25: RNCC: 5 | RNVC: 9
MS21334-25: RNCC: 5 | RNVC: 9
5342PL0364002: RNCC: 6 | RNVC: 9

30 Oct 1977

5340-01-090-8916
Loop Clamp

010908916
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D19NH: RNCC: 3 | RNVC: 2
MS9352-18: RNCC: 5 | RNVC: 9

26 Feb 1980

5340-01-055-8904
Loop Clamp

010558904
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D16KWX: RNCC: 3 | RNVC: 2
TA1720D16T: RNCC: 3 | RNVC: 2
LS7357DT16: RNCC: 3 | RNVC: 2
MS21122-16: RNCC: 5 | RNVC: 9
5340PL1689148: RNCC: 6 | RNVC: 9
5340PL0731751: RNCC: 6 | RNVC: 9
385-16: RNCC: E | RNVC: 8
JM43LC14WD16X: RNCC: E | RNVC: 8
TA04C76WD16X: RNCC: E | RNVC: 8

13 Feb 1978

NSN 5340-01-059-0114 010590114 CAP,PROTECTIVE,DUST AND MOISTURE SEAL

5340-01-059-0114
Dust And Moisture Seal Protective Cap

010590114
11675004: RNCC: 3 | RNVC: 2
11675004: RNCC: 5 | RNVC: 2
5217 4117-004: RNCC: 5 | RNVC: 2
3HR659: RNCC: 5 | RNVC: 2
11675004: RNCC: 5 | RNVC: 9
5217 4117-004: RNCC: 5 | RNVC: 9
3HR659: RNCC: 5 | RNVC: 9
8.35.012.00: RNCC: 5 | RNVC: 9
001526: RNCC: 5 | RNVC: 9
8.35.012: RNCC: 5 | RNVC: 9

6 Apr 1978

5340-01-048-1261
Positive Index Locking Device

010481261
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K4CP: RNCC: 3 | RNVC: 2
5340PL0846530: RNCC: 6 | RNVC: 9

19 Sep 1977

5340-01-034-1477
Electrical-Mechanical Equipment Post

010341477
GS500AY04C3P8: RNCC: 3 | RNVC: 2
8081SS0440-7: RNCC: 5 | RNVC: 2
580R576H01: RNCC: 5 | RNVC: 2
EG3: RNCC: 5 | RNVC: 2
PE2-3: RNCC: 5 | RNVC: 9
8081-SS-0440-0: RNCC: 5 | RNVC: 9
8081SS0440-7: RNCC: 5 | RNVC: 9
8081-SS-0440: RNCC: 5 | RNVC: 9
8081-SS-0440: RNCC: 5 | RNVC: 9
8081-SS-0440-0: RNCC: 5 | RNVC: 9

20 Jan 1977

5340-01-082-3003
Dust And Moisture Seal Protective Cap

010823003
NAS847: RNCC: 3 | RNVC: 1
NAS844-4: RNCC: 3 | RNVC: 2
213-D: RNCC: 5 | RNVC: 1
M5501/9-F4: RNCC: 5 | RNVC: 9
MIL-C-5501/9: RNCC: 5 | RNVC: 9
3/16SC: RNCC: C | RNVC: 1
M5501/9-F4: RNCC: C | RNVC: 1

30 Aug 1979

5340-01-070-4475
Retaining Strap

010704475
81-000108: RNCC: 3 | RNVC: 2
S48542: RNCC: 5 | RNVC: 2
1-7071: RNCC: 5 | RNVC: 2
302E: RNCC: 5 | RNVC: 2
D121608: RNCC: 5 | RNVC: 2
10926074: RNCC: 5 | RNVC: 2
A3144163: RNCC: 5 | RNVC: 2
LA-889-1: RNCC: 5 | RNVC: 9
81000108: RNCC: 5 | RNVC: 9
8446909: RNCC: 7 | RNVC: 2

11 Jan 1979

5340-01-070-3186
Mounting Bracket

010703186
12012161: RNCC: 3 | RNVC: 2
5340010703186: RNCC: 6 | RNVC: 9

10 Jan 1979

5340-01-034-2851
Angle Bracket

010342851
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-010: RNCC: 3 | RNVC: 2
MS9600-010: RNCC: 3 | RNVC: 9
MS9600-010: RNCC: 5 | RNVC: 9

22 Jan 1977

5340-01-113-0879
Dust And Moisture Seal Protective Cap-Plug

011130879
NAS834: RNCC: 3 | RNVC: 1
NAS834-53: RNCC: 3 | RNVC: 2
30-063-2: RNCC: 5 | RNVC: 2
241: RNCC: 5 | RNVC: 2
000-8008-933: RNCC: 5 | RNVC: 2
448984-8: RNCC: 5 | RNVC: 2
917957: RNCC: 5 | RNVC: 9
6: RNCC: 5 | RNVC: 9
207: RNCC: 5 | RNVC: 9
SIZE6: RNCC: 5 | RNVC: 9

15 May 1981

5340-01-097-9637
Loop Clamp

010979637
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C9N: RNCC: 3 | RNVC: 2

24 Jul 1980

5340-01-114-1386
Loop Clamp

011141386
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-30N: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-01-113-0877
Dust And Moisture Seal Protective Cap-Plug

011130877
NAS834: RNCC: 3 | RNVC: 1
NAS834-39: RNCC: 3 | RNVC: 2
M5501/7-F7: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9

15 May 1981

5340-01-113-0908
Loop Clamp

011130908
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D26KWX: RNCC: 3 | RNVC: 2
MS21122-26: RNCC: 5 | RNVC: 9
5340PL1758953: RNCC: 6 | RNVC: 9
5340PL0847642: RNCC: 6 | RNVC: 9

15 May 1981

5340-01-046-5631
Positive Index Locking Device

010465631
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K12CP: RNCC: 3 | RNVC: 2
10154114: RNCC: 6 | RNVC: 9

19 Aug 1977

5340-01-086-2650
Spring Tension Clip

010862650
12273237-3: RNCC: 3 | RNVC: 2
CTJ-3D-04: RNCC: 5 | RNVC: 2
YCTJ-3A-04V0030000: RNCC: 5 | RNVC: 2
CTJ-3D-04: RNCC: 5 | RNVC: 9
5204815-4: RNCC: C | RNVC: 1
CTJ-3D-04: RNCC: C | RNVC: 1

24 Nov 1979

5340-01-085-3520
Loop Clamp

010853520
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-3TW: RNCC: 3 | RNVC: 2
NAS1714D2-3SW: RNCC: C | RNVC: 1

6 Nov 1979

5340-01-100-5403
Spring Tension Clip

011005403
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-071-08C: RNCC: 3 | RNVC: 2

8 Sep 1980

5340-01-096-2879
Loop Clamp

010962879
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF40: RNCC: 3 | RNVC: 2
AS21919WDF40: RNCC: 3 | RNVC: 9
S663WDF40: RNCC: 5 | RNVC: 1
JM44LC28WD40YN: RNCC: 5 | RNVC: 1
ST9M588WDF40: RNCC: 5 | RNVC: 1
815WD40NB: RNCC: 5 | RNVC: 9
5340002518289: RNCC: 5 | RNVC: 9
MS21919WDF40: RNCC: 5 | RNVC: 9
10117619: RNCC: 6 | RNVC: 9

17 Jun 1980

5340-01-053-3813
Sealing Plug Assembly

010533813
J108P56A: RNCC: 1 | RNVC: 2
AS3123-08: RNCC: 3 | RNVC: 2
PLGA3435010: RNCC: 3 | RNVC: 2
SAE-AS3123: RNCC: 5 | RNVC: 1
AS3123-08: RNCC: 5 | RNVC: 9
2407SA08-1: RNCC: 5 | RNVC: 9
PLGA3435010A: RNCC: 5 | RNVC: 9
AS3123-08: RNCC: 5 | RNVC: 9
J108P56A: RNCC: 5 | RNVC: 9

5 Jan 1978

5340-01-121-0485
Loop Clamp

011210485
M85052/3-16: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000116HC: RNCC: 5 | RNVC: 1
9M972-16S: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112412: RNCC: 6 | RNVC: 9

29 Oct 1981

5340-01-083-9003
Loop Clamp

010839003
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D9KW: RNCC: 3 | RNVC: 2

3 Oct 1979

5340-01-118-8098
Butt Hinge

011188098
AA55592-11C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-11C: RNCC: 5 | RNVC: 1
MS35825-11C506: RNCC: 5 | RNVC: 9
MS35825-3C: RNCC: 5 | RNVC: 9
MS35825-11C871: RNCC: 5 | RNVC: 9
MS35825-11C: RNCC: 5 | RNVC: 9
MS35825-11C534: RNCC: 5 | RNVC: 9
MS35825-11C350: RNCC: C | RNVC: 1
MS35825-11C521: RNCC: C | RNVC: 1

12 Sep 1981

5340-01-091-9432
Dust And Moisture Seal Protective Cap

010919432
ETN2785: RNCC: 3 | RNVC: 2
1077: RNCC: 5 | RNVC: 1
1143/1: RNCC: 5 | RNVC: 2
ETN2785: RNCC: 5 | RNVC: 9
5340PL1259520: RNCC: 6 | RNVC: 9
2911480: RNCC: 7 | RNVC: 2
ETN-2785: RNCC: C | RNVC: 1
6097934-001: RNCC: C | RNVC: 1
2911480-1: RNCC: C | RNVC: 1
3168702: RNCC: C | RNVC: 1

16 Mar 1980

5340-01-081-8281
Snap Hook

010818281
NASM43770/8: RNCC: 3 | RNVC: 1
M43770/8-MIZ1: RNCC: 3 | RNVC: 2
MIL-S-43770/8: RNCC: 5 | RNVC: 9
M43770/8-MIZ1: RNCC: 5 | RNVC: 9
MIL-S-43403 TYP EII: RNCC: C | RNVC: 1
MIL-S-43770/8M4 3770/8-M1Z1: RNCC: C | RNVC: 1
M4377018-MIZ1: RNCC: C | RNVC: 1

20 Aug 1979

5340-01-074-0625
Loop Clamp

010740625
477-25: RNCC: 3 | RNVC: 2
TA11C44D25T: RNCC: 3 | RNVC: 2
JM44LC9D25T: RNCC: 3 | RNVC: 2
S280D25: RNCC: 3 | RNVC: 2
5340PL0847215: RNCC: 6 | RNVC: 9
5340PL1971997: RNCC: 6 | RNVC: 9
C2874D25: RNCC: 7 | RNVC: 2

24 Mar 1979

5340-01-059-7943
Spring Tension Clip

010597943
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-056-06C: RNCC: 3 | RNVC: 2

15 Apr 1978

5340-01-080-4094
Sealing Plug Assembly

010804094
PLGA1250020: RNCC: 3 | RNVC: 2
PLGA1250020A: RNCC: 3 | RNVC: 2
PLGA1250020: RNCC: 5 | RNVC: 2
093-49832-4: RNCC: 5 | RNVC: 2
093-49832-4: RNCC: 5 | RNVC: 2
ST7M141C4S: RNCC: 5 | RNVC: 2
4828-11: RNCC: 5 | RNVC: 9
125002: RNCC: 5 | RNVC: 9
10117596: RNCC: 6 | RNVC: 9
576R929H54: RNCC: 7 | RNVC: 2

26 Jul 1979

5340-01-098-6680
Loop Clamp

010986680
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C16-8S: RNCC: 3 | RNVC: 2

6 Aug 1980

5340-01-105-9619
Loop Clamp

011059619
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-14N: RNCC: 3 | RNVC: 2
10117640: RNCC: 6 | RNVC: 9

8 Jan 1981

5340-01-106-9897
Dust And Moisture Seal Protective Plug

011069897
NAS847: RNCC: 3 | RNVC: 1
NAS843-4: RNCC: 3 | RNVC: 2
NAS847-8: RNCC: 5 | RNVC: 2
M5501/8-F3: RNCC: 5 | RNVC: 9
MIL-C-5501/8: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-01-707-6757
Electronic Equipment Hardware Kit

017076757
SYN-9038: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-120-5753
Helical Compression Spring Seat

011205753
74A450810-2001: RNCC: 3 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 2
74A450810-2001: RNCC: 5 | RNVC: 9
74A450810-2001: RNCC: 5 | RNVC: 9
10112401: RNCC: 6 | RNVC: 9

21 Oct 1981

5340-01-117-2499
Loop Clamp

011172499
M85052/1-6: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026000106NB: RNCC: 5 | RNVC: 1
SS7563-6NBC: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10117672: RNCC: 6 | RNVC: 9
5340PL0639300: RNCC: 6 | RNVC: 9
M85052/1-6: RNCC: C | RNVC: 1

11 Aug 1981

5340-01-116-0760
Loop Clamp

011160760
HP-6N: RNCC: 3 | RNVC: 2
1857207-6: RNCC: 5 | RNVC: 2
731.33.007: RNCC: 5 | RNVC: 2
NA710876-6: RNCC: 5 | RNVC: 2
946.31.05.705: RNCC: 5 | RNVC: 2
HP-6N: RNCC: 5 | RNVC: 2
V731.33.007: RNCC: 5 | RNVC: 9
00-975-1440: RNCC: 6 | RNVC: 9
12-148-4720: RNCC: 6 | RNVC: 9
14-537-7456: RNCC: 6 | RNVC: 9

20 Jul 1981

5340-01-706-3897
Dust And Moisture Seal Protective Plug

017063897
12606203: RNCC: 1 | RNVC: 2
15305171: RNCC: 3 | RNVC: 2

21 Nov 2022

5340-01-127-1816
Retaining Strap

011271816
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D8-13T: RNCC: 3 | RNVC: 2
16E3678-135: RNCC: 3 | RNVC: 2
5340PL1825416: RNCC: 6 | RNVC: 9
5340PL0726788: RNCC: 6 | RNVC: 9

24 Feb 1982

5340-01-131-9008
Retaining Strap

011319008
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24-43N: RNCC: 3 | RNVC: 2
10130764: RNCC: 6 | RNVC: 9

18 May 1982

5340-01-120-8269
Loop Clamp

011208269
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D2KX: RNCC: 3 | RNVC: 2
MS21122-2: RNCC: 5 | RNVC: 9
5340PL0726141: RNCC: 6 | RNVC: 9

23 Oct 1981

5340-01-131-3136
Loop Clamp

011313136
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-26N: RNCC: 3 | RNVC: 2
10112583: RNCC: 6 | RNVC: 9

7 May 1982

5340-01-129-4604
Loop Clamp

011294604
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-14N: RNCC: 3 | RNVC: 2
10112542: RNCC: 6 | RNVC: 9

7 Apr 1982

5340-01-118-6447
Spring Tension Clip

011186447
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-103: RNCC: 3 | RNVC: 2
MIL-C-24066/4: RNCC: 5 | RNVC: 9
M24066/4-103: RNCC: 5 | RNVC: 9
10117679: RNCC: 6 | RNVC: 9
M24066-4-103: RNCC: C | RNVC: 1

8 Sep 1981

5340-01-131-5651
Retaining Strap

011315651
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10W26N: RNCC: 3 | RNVC: 2
10112593: RNCC: 6 | RNVC: 9

12 May 1982

5340-01-131-9005
Retaining Strap

011319005
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10-30N: RNCC: 3 | RNVC: 2
10112600: RNCC: 6 | RNVC: 9

18 May 1982

5340-01-127-1634
Loop Clamp

011271634
M85052/3-13: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
JM44LC70WPH13SF: RNCC: 5 | RNVC: 1
1444PHW13B: RNCC: 5 | RNVC: 1
TA026000113HC: RNCC: 5 | RNVC: 1
9M972-13S: RNCC: 5 | RNVC: 1
9M972-13S: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
M85052/3B-13: RNCC: 5 | RNVC: 9
10112513: RNCC: 6 | RNVC: 9

24 Feb 1982

5340-01-134-5995
Spring Tension Clip

011345995
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-303: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-303: RNCC: 5 | RNVC: 9
M24066/2-103: RNCC: 5 | RNVC: 9
1018990-003: RNCC: E | RNVC: 8
713364: RNCC: E | RNVC: 8
1018990-003: RNCC: E | RNVC: 8

6 Jul 1982

5340-01-470-0271
Dust And Moisture Seal Protective Plug

014700271
M5501/15-10G: RNCC: 2 | RNVC: 2
MIL-C-5501/15: RNCC: 4 | RNVC: 1

6 Dec 1999

5340-01-152-1100
Nut And Bolt Locking Plate

011521100
74A410714-2003: RNCC: 3 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 2
74A410714-2003: RNCC: 5 | RNVC: 9

27 Apr 1983

5340-01-140-0085
Loop Clamp

011400085
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-10: RNCC: 3 | RNVC: 2
MS9349-10: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-01-138-6473
Loop Clamp

011386473
M85052/1-18: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
1444PHW18Y: RNCC: 5 | RNVC: 1
TA026000118NB: RNCC: 5 | RNVC: 1
9M972-18N: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
9M972-18N: RNCC: C | RNVC: 1
SS7563-18NBC: RNCC: C | RNVC: 1

17 Sep 1982

5340-01-159-6625
Angle Bracket

011596625
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-091: RNCC: 3 | RNVC: 2
MS9592-091: RNCC: 5 | RNVC: 9

11 Aug 1983

5340-01-157-9683
Loop Clamp

011579683
AS21919WCH40: RNCC: 2 | RNVC: 2
SAE-AS21919: RNCC: 5 | RNVC: 1
AS21919WCH40: RNCC: 5 | RNVC: 1
MIL-C-8603: RNCC: 5 | RNVC: 9
MS21919WCH40: RNCC: 5 | RNVC: 9
MS21919WCH40: RNCC: 5 | RNVC: 9
10112814: RNCC: 6 | RNVC: 9
5340PL1672859: RNCC: 6 | RNVC: 9

14 Jul 1983

5340-01-160-2464
Line Supporting Strap

011602464
1S9593: RNCC: 3 | RNVC: 2
16KP198: RNCC: 5 | RNVC: 2
1S-9593: RNCC: 5 | RNVC: 2
16KP198: RNCC: 5 | RNVC: 9

19 Aug 1983

5340-01-711-2041

017112041
NGC500EG-7C6: RNCC: 3 | RNVC: 2
NGC500EG-7C6: RNCC: 5 | RNVC: 2

5340-01-711-1778

017111778
60020101-4-4: RNCC: 3 | RNVC: 2
60020101: RNCC: D | RNVC: 9

5340-01-712-7110

017127110
M0620-00010-049: RNCC: 3 | RNVC: 2

5340-01-711-2033

017112033
5140T42P01: RNCC: 3 | RNVC: 2
5140T42: RNCC: D | RNVC: 9

5340-01-712-3020

017123020
801-6640796-111: RNCC: 3 | RNVC: 2
2633-625-01-111: RNCC: C | RNVC: 1
6640796: RNCC: D | RNVC: 9

5340-01-712-7121

017127121
06208-02653-045: RNCC: 3 | RNVC: 2
06208-02653: RNCC: D | RNVC: 9

5340-01-711-2052

017112052
5161T82G01: RNCC: 3 | RNVC: 2
5161T82: RNCC: D | RNVC: 9

5340-01-713-4309

017134309
123SME90130-149: RNCC: 3 | RNVC: 2
123SME90130: RNCC: D | RNVC: 9

5340-01-714-0174

017140174
N0022-114: RNCC: 3 | RNVC: 2
PD20005-1: RNCC: D | RNVC: 9

5340-01-714-1549

017141549
803-7526200-XKXX-32: RNCC: 3 | RNVC: 2
803-7526200: RNCC: D | RNVC: 9

5340-01-714-1702

017141702
AS21919-WCE18: RNCC: 3 | RNVC: 2
AS21919: RNCC: D | RNVC: 9

5340-01-714-5383

017145383
M0620-00069-119: RNCC: 3 | RNVC: 2
PLM0620-00069: RNCC: D | RNVC: 9

5340-01-714-4579

017144579
CB1280-20: RNCC: 3 | RNVC: 2
CB1280: RNCC: D | RNVC: 9

5340-01-711-7637

017117637
4626-1031-SS: RNCC: 3 | RNVC: 2
91075A020: RNCC: 5 | RNVC: 2
13101363: RNCC: 7 | RNVC: 2

5340-01-711-1672

017111672
5157T05P01: RNCC: 3 | RNVC: 2

5340-01-711-1265

017111265
12675460: RNCC: 3 | RNVC: 2
12675460: RNCC: C | RNVC: 1

5340-01-713-7713

017137713
M0620-00011-042: RNCC: 3 | RNVC: 2

5340-01-714-2622

017142622
06208-02650-421: RNCC: 3 | RNVC: 2
PL06208-02650: RNCC: D | RNVC: 9

5340-01-714-4431

017144431
06208-02650-049: RNCC: 3 | RNVC: 2

5340-01-713-6110

017136110
5153T22P02: RNCC: 3 | RNVC: 2
5153T22: RNCC: D | RNVC: 9

5340-01-714-5418

017145418
3686AS2144-1: RNCC: 3 | RNVC: 2
3686AS2144: RNCC: D | RNVC: 9

5340-01-713-9181

017139181
M0620-00025-101: RNCC: 3 | RNVC: 2
M0620-00025: RNCC: D | RNVC: 9

5340-01-713-7333

017137333
M0620-00014-052: RNCC: 3 | RNVC: 2

5340-01-711-1849

017111849
NGC500EG-8C3: RNCC: 3 | RNVC: 2
NGC500EG-BC3: RNCC: 5 | RNVC: 2
NGC500EG-8C3: RNCC: 5 | RNVC: 2
NGC500EG-8C3: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

5340-01-711-2491

017112491
579-7965: RNCC: 3 | RNVC: 2
579-7965: RNCC: C | RNVC: 1

5340-01-713-4211

017134211
5155T17G01: RNCC: 3 | RNVC: 2
5155T17: RNCC: D | RNVC: 9

5340-00-291-3551
Snap Hook

002913551
NASM43770/1: RNCC: 3 | RNVC: 1
M43770/1-CWBC3: RNCC: 3 | RNVC: 2
MS51828-3B: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-154-5309
Access Door Hinge

011545309
74A315037-1004: RNCC: 3 | RNVC: 2
74A315037-1001: RNCC: E | RNVC: 8

26 May 1983

5340-01-138-2165
Dust And Moisture Seal Protective Cap

011382165
NAS835: RNCC: 3 | RNVC: 1
NAS835-8A: RNCC: 3 | RNVC: 2
M5501/3-108: RNCC: 5 | RNVC: 9
MIL-C-5501/3: RNCC: 5 | RNVC: 9

8 Sep 1982

5340-01-713-7504

017137504
M0620-00010-055: RNCC: 3 | RNVC: 2

5340-01-714-4657

017144657
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W19N: RNCC: 3 | RNVC: 2

5340-01-714-4427

017144427
06208-02650-068: RNCC: 3 | RNVC: 2

5340-01-714-5417

017145417
4189AS2020-4: RNCC: 3 | RNVC: 2
4189AS2020: RNCC: D | RNVC: 9

5340-01-714-5341

017145341
06808-06038-110: RNCC: 3 | RNVC: 2
PL06808-06038: RNCC: D | RNVC: 9

5340-01-713-7848

017137848
M0620-00011-048: RNCC: 3 | RNVC: 2

5340-01-714-4707

017144707
66659: RNCC: 3 | RNVC: 2
68741 REV - ITEM 7: RNCC: C | RNVC: 1
68741: RNCC: D | RNVC: 9

5340-01-714-1652

017141652
563-8836451-8: RNCC: 3 | RNVC: 2
R5520402-8: RNCC: 5 | RNVC: 2
LSA004443-8: RNCC: 5 | RNVC: 2
563-8842381-66: RNCC: 5 | RNVC: 2
LOA022823-66: RNCC: 5 | RNVC: 2
R5520601-66: RNCC: 5 | RNVC: 2
8836451: RNCC: D | RNVC: 9
8842381: RNCC: D | RNVC: 9

5340-01-151-8581
Spring Tension Clip

011518581
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B036-05N: RNCC: 3 | RNVC: 2
NAS1464B-036-05 N: RNCC: C | RNVC: 1

22 Apr 1983

5340-01-713-8032

017138032
M0620-00025-044: RNCC: 3 | RNVC: 2

5340-01-714-0403

017140403
M0620-00025-042: RNCC: 3 | RNVC: 2
M0620-00025: RNCC: D | RNVC: 9

5340-01-714-5463

017145463
182K0340-2-SV: RNCC: 3 | RNVC: 2
182K0340-1-SV: RNCC: 5 | RNVC: 9
182K0340: RNCC: D | RNVC: 9

5340-01-713-6138

017136138
12641517: RNCC: 3 | RNVC: 2
12641517: RNCC: C | RNVC: 1

5340-01-714-0401

017140401
NAS1712C20-22N: RNCC: 3 | RNVC: 2

5340-01-714-2641

017142641
06208-02650-416: RNCC: 3 | RNVC: 2
PL06208-02650: RNCC: D | RNVC: 9

5340-01-714-2628

017142628
06208-02029-062: RNCC: 3 | RNVC: 2
PL06208-02029: RNCC: D | RNVC: 9

5340-01-714-3852

017143852
8794821-11: RNCC: 3 | RNVC: 2
8794821: RNCC: D | RNVC: 9

5340-01-713-6026

017136026
123SME90132-27: RNCC: 3 | RNVC: 2
123SME90132: RNCC: D | RNVC: 9

5340-01-714-5604

017145604
512-8839672-15-4: RNCC: 3 | RNVC: 2
R6432612-15-4: RNCC: 5 | RNVC: 2
LSA005045-15-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 14 FIND 15-4: RNCC: C | RNVC: 1
8839672: RNCC: D | RNVC: 9

5340-01-713-8489

017138489
SF-R2708SHK-TAN: RNCC: 3 | RNVC: 2

5340-01-713-6778

017136778
30-302-2C17J19: RNCC: 3 | RNVC: 2
30-302-2C17J19: RNCC: 5 | RNVC: 2
30-302-2C17J19: RNCC: 5 | RNVC: 2
30-302-2C17J19: RNCC: 5 | RNVC: 2
30-302-2C17J19: RNCC: 5 | RNVC: 2
30-302: RNCC: D | RNVC: 9

5340-01-713-9069

017139069
M0620-00015-111: RNCC: 3 | RNVC: 2
M0620-00015: RNCC: D | RNVC: 9

5340-01-714-5372

017145372
M0620-00121-041: RNCC: 3 | RNVC: 2
PLM0620-00121: RNCC: D | RNVC: 9
ALM0620-00121: RNCC: D | RNVC: 9

5340-01-713-6781

017136781
CB3001CRA3-7P: RNCC: 3 | RNVC: 2
NGS500EE3-7P: RNCC: 5 | RNVC: 2
CB3001: RNCC: D | RNVC: 9

5340-01-714-4535

017144535
326P1S5085-201: RNCC: 3 | RNVC: 2

5340-01-714-3955

017143955
3F L60 80 CM 16 CR KD LH WSCR 3-: RNCC: 3 | RNVC: 1

5340-01-713-6913

017136913
06809-06036-041: RNCC: 3 | RNVC: 2

5340-01-714-4423

017144423
06208-02650-063: RNCC: 3 | RNVC: 2

5340-01-713-8792

017138792
M0620-00010-043: RNCC: 3 | RNVC: 2

5340-01-714-2661

017142661
06208-02550-041: RNCC: 3 | RNVC: 2
PL06208-02550: RNCC: D | RNVC: 9

5340-01-187-3595
Bow Handle

011873595
NASM39087: RNCC: 3 | RNVC: 1
MS39087-307CP: RNCC: 3 | RNVC: 2
MS39087-105CP: RNCC: 5 | RNVC: 9
MS39087-307CP: RNCC: 5 | RNVC: 9
5340PL0972514: RNCC: 6 | RNVC: 9

21 Aug 1984

5340-01-189-1267
Electrical-Mechanical Equipment Post

011891267
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-3B12: RNCC: 3 | RNVC: 2

12 Sep 1984

5340-01-188-9099
Electrical-Mechanical Equipment Post

011889099
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E20: RNCC: 3 | RNVC: 2
9360076: RNCC: D | RNVC: 9

10 Sep 1984

5340-01-394-8857
Retaining Strap

013948857
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C24W36N: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-01-701-4802
Dust And Moisture Seal Protective Cap

017014802
4424420-000: RNCC: 3 | RNVC: 2

18 May 2022

5340-01-699-6523
Dust And Moisture Seal Protective Cap

016996523
12193-3981-01: RNCC: 3 | RNVC: 2

16 Feb 2022

5340-01-712-8652

017128652
M0620-00014-042: RNCC: 3 | RNVC: 2

5340-01-712-3087

017123087
9NG0012H8F: RNCC: 3 | RNVC: 2
40005SS8FS: RNCC: 5 | RNVC: 2
TA0220055HO8FK: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

5340-01-711-1808

017111808
5165T25G01: RNCC: 3 | RNVC: 2
5165T25: RNCC: D | RNVC: 9

5340-01-711-1381

017111381
5150T50G01: RNCC: 3 | RNVC: 2
5150T50: RNCC: D | RNVC: 9

5340-01-711-1512

017111512
5145T09P05: RNCC: 3 | RNVC: 2
5145T09: RNCC: D | RNVC: 9

5340-01-713-3707

017133707
06808-06038-113: RNCC: 3 | RNVC: 2

5340-00-188-0292
Turnbuckle

001880292
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 3/4X12: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-701-8706
Stand And Roller Pipe Support Extension Tube

017018706
MB-03015: RNCC: 3 | RNVC: 2

14 Jun 2022

5340-01-705-5873
Dust And Moisture Seal Protective Cap

017055873
9-2-1121-21: RNCC: 3 | RNVC: 2

28 Sep 2022

5340-01-706-3786
Dust And Moisture Seal Protective Cover

017063786
87820: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-700-9109
Dust And Moisture Seal Protective Cap-Plug

017009109
015567S7-16D: RNCC: 3 | RNVC: 2
015567S7 REV G: RNCC: D | RNVC: 9

20 Apr 2022

5340-01-707-0849
Dust And Moisture Seal Protective Cap

017070849
78700-70000-041: RNCC: 3 | RNVC: 2
PL 78700-70000 ITEM 041: RNCC: C | RNVC: 1
78700-70000: RNCC: D | RNVC: 9

13 Jan 2023

5340-01-706-1824
Dust And Moisture Seal Protective Cap

017061824
868100-1: RNCC: 3 | RNVC: 2

7 Nov 2022

5340-01-706-6830
Dust And Moisture Seal Protective Cap-Plug

017066830
IPT3181-14CFMB: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-707-2720
Dust And Moisture Seal Protective Cap

017072720
ACA3537-1: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-707-1641
Dust And Moisture Seal Protective Cap-Plug

017071641
667-218-NF-R816-6: RNCC: 3 | RNVC: 2
13082644: RNCC: 7 | RNVC: 2

20 Jan 2023

5340-00-186-3398
Loop Clamp

001863398
AN742D36: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-186-3421
Loop Clamp

001863421
AN742D9: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-026-2135
Spring Tension Clip

000262135
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-307: RNCC: 3 | RNVC: 2
416949-7: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-307: RNCC: 5 | RNVC: 9
139-2230-000: RNCC: C | RNVC: 1
M24066/2-307: RNCC: C | RNVC: 1
MS17160-7: RNCC: C | RNVC: 1
100-200-5-10: RNCC: C | RNVC: 1
5807940: RNCC: C | RNVC: 1

24 Oct 1972

5340-00-186-3394
Loop Clamp

001863394
AN742D32: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
10117279: RNCC: 6 | RNVC: 9
GC12GA32: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-184-9563
Angle Bracket

001849563
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-212: RNCC: 3 | RNVC: 2
MS9592-212: RNCC: 5 | RNVC: 9

7 Mar 1973

5340-00-170-1706
Angle Bracket

001701706
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-018: RNCC: 3 | RNVC: 2
AS9593-018: RNCC: 5 | RNVC: 9
MS9593-018: RNCC: 5 | RNVC: 9

14 Feb 1973

5340-00-170-1674
Mending Plate

001701674
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-008: RNCC: 3 | RNVC: 2
MS9552-008: RNCC: 5 | RNVC: 9

14 Feb 1973

5340-00-171-5529
Retaining Strap

001715529
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-8K: RNCC: 3 | RNVC: 2

16 Feb 1973

5340-00-165-1881
Angle Bracket

001651881
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-006: RNCC: 3 | RNVC: 2
MS9592-006: RNCC: 5 | RNVC: 9

19 Nov 1971

5340-00-151-6013
Angle Bracket

001516013
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-128: RNCC: 3 | RNVC: 2
AS9592-MS9592-128: RNCC: 3 | RNVC: 9
MS9592-128: RNCC: 5 | RNVC: 2
MS9592-128: RNCC: 5 | RNVC: 9
AS9592-MS9592-128: RNCC: 5 | RNVC: 9

7 Apr 1971

5340-00-143-0040
Loop Clamp

001430040
SAE-AS9353: RNCC: 3 | RNVC: 1
MS9353-09: RNCC: 3 | RNVC: 2
AS9353: RNCC: 3 | RNVC: 9
MS9353-09: RNCC: 5 | RNVC: 9
MS9353-09: RNCC: 5 | RNVC: 9
AS9353: RNCC: 5 | RNVC: 9

1 Jul 1968

5340-00-138-9843
Angle Bracket

001389843
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-005: RNCC: 3 | RNVC: 2
MS9593-005: RNCC: 5 | RNVC: 9

27 Aug 1971

5340-00-119-7504
Angle Bracket

001197504
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-056: RNCC: 3 | RNVC: 2
9682013407: RNCC: 5 | RNVC: 2
MS9592-056: RNCC: 5 | RNVC: 9
968.20.13.407: RNCC: 5 | RNVC: 9

4 Jan 1973

5340-00-103-2877
Loop Clamp

001032877
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D9-17N: RNCC: 3 | RNVC: 2

12 Jun 1968

5340-00-078-3619
Loop Clamp

000783619
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-05: RNCC: 3 | RNVC: 2
AS9349-MS9349-05: RNCC: 3 | RNVC: 9
AS9349-MS9349-05: RNCC: 5 | RNVC: 9
MS9349-05: RNCC: 5 | RNVC: 9
MS9349-05: RNCC: C | RNVC: 1
8016-S-6: RNCC: C | RNVC: 1
JM43LC3SS6T: RNCC: C | RNVC: 1

11 Aug 1967

5340-00-078-7327
Bow Handle

000787327
1058-30: RNCC: 3 | RNVC: 2
A3594-4A: RNCC: 3 | RNVC: 2
100715-010: RNCC: 5 | RNVC: 2
222846-000: RNCC: 5 | RNVC: 2
7531117P0003: RNCC: 5 | RNVC: 9
7531117P3: RNCC: 5 | RNVC: 9
415-1290-03-14: RNCC: 5 | RNVC: 9
10233-A-0832-35: RNCC: 5 | RNVC: 9
1292-1: RNCC: 5 | RNVC: 9
1292: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-068-0531
Rod End Clevis

000680531
MS21252-5LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-5LS: RNCC: 5 | RNVC: 1
MS21252-5LS: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-068-0534
Turnbuckle Body

000680534
MS21251-10L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-068-0527
Rod End Clevis

000680527
MS21252-3RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-3RS: RNCC: 5 | RNVC: 1
MS21252-3RS: RNCC: 5 | RNVC: 1
AN161-16RS: RNCC: 5 | RNVC: 2
MS21252-3BS: RNCC: 5 | RNVC: 9
AN161-16RS: RNCC: 5 | RNVC: 9
5340PL1734553: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-067-9880
Turnbuckle Body

000679880
MS21251-B5L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-069-2804
Spring Tension Clip

000692804
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-326: RNCC: 3 | RNVC: 2
416949-26: RNCC: 5 | RNVC: 1
B68761: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066-2-326: RNCC: 5 | RNVC: 9
M24066/2-126: RNCC: 5 | RNVC: 9
6012-104A: RNCC: 5 | RNVC: 9
MS17160-26: RNCC: 5 | RNVC: 9
852315-73: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-057-8689
Loop Clamp

000578689
NASM21333: RNCC: 3 | RNVC: 1
MS21333-11: RNCC: 3 | RNVC: 2
MS21333-11: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-050-2750
Loop Clamp

000502750
NASM21322: RNCC: 3 | RNVC: 1
MS21322-39: RNCC: 3 | RNVC: 2
MS21322-39: RNCC: 5 | RNVC: 9
BA98202-21: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-286-2494
Loop Clamp

002862494
NASM21333: RNCC: 3 | RNVC: 1
MS21333-36: RNCC: 3 | RNVC: 2
327701: RNCC: 5 | RNVC: 1
327705: RNCC: 5 | RNVC: 1
120523: RNCC: 5 | RNVC: 1
105247: RNCC: 5 | RNVC: 1
5264479: RNCC: 5 | RNVC: 1
120523: RNCC: 5 | RNVC: 1
A14198: RNCC: 5 | RNVC: 1
180424: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-282-7965
Loop Clamp

002827965
47306-9: RNCC: 3 | RNVC: 2
1JA7562H01: RNCC: 3 | RNVC: 2
54B7259H03: RNCC: 3 | RNVC: 2
F6NY-250BL: RNCC: 3 | RNVC: 2
108363-3: RNCC: 3 | RNVC: 2
F50-510-3: RNCC: 3 | RNVC: 2
1JA7562H01: RNCC: 3 | RNVC: 2
CVC846-4: RNCC: 3 | RNVC: 2
CPC1953B4: RNCC: 3 | RNVC: 2
G4343-9: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-282-7515
Loop Clamp

002827515
NASM21333: RNCC: 3 | RNVC: 1
MS21333-37: RNCC: 3 | RNVC: 2
MS21333-37: RNCC: 5 | RNVC: 9
5340002827515: RNCC: 5 | RNVC: 9
120524: RNCC: 5 | RNVC: 9
5340002827515: RNCC: 6 | RNVC: 9
RA-4400-4-C: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-250-8431
Loop Clamp

002508431
AN742D38: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-239-0917
Bow Handle

002390917
7545950: RNCC: 3 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH111: RNCC: 4 | RNVC: 1
7545950: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-235-0176
Bail Handle

002350176
MS18012-6: RNCC: 2 | RNVC: 2
MS18012: RNCC: 4 | RNVC: 1

28 May 1973

5340-00-217-9599
Retaining Clip

002179599
31265: RNCC: 3 | RNVC: 2
0234116-00: RNCC: 5 | RNVC: 2
91MAD1: RNCC: 5 | RNVC: 2
5680E9076: RNCC: 5 | RNVC: 2
NW14933: RNCC: 5 | RNVC: 2
1718D108: RNCC: 5 | RNVC: 2
09-31265: RNCC: 5 | RNVC: 2
5680E9076: RNCC: 5 | RNVC: 2
1718D108: RNCC: 5 | RNVC: 9
14933: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-205-6208
Loop Clamp

002056208
PP6: RNCC: 2 | RNVC: 2
107219-27: RNCC: 5 | RNVC: 1
291AS253-7: RNCC: 5 | RNVC: 1
G4343-12: RNCC: 5 | RNVC: 1
F50-510-6: RNCC: 5 | RNVC: 1
0350663: RNCC: 5 | RNVC: 1
108363-6: RNCC: 5 | RNVC: 1
350663: RNCC: 5 | RNVC: 1
F6NY-437-0: RNCC: 5 | RNVC: 1
422011: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-200-8670
Loop Clamp

002008670
AN742-11: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-205-6115
Butt Hinge Leaf

002056115
AN257HC3: RNCC: 2 | RNVC: 2
AN257: RNCC: 4 | RNVC: 1
MS20257HC3-4800: RNCC: 5 | RNVC: 1
AN257HC3: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-190-6801
Retaining Strap

001906801
NASM21314: RNCC: 3 | RNVC: 1
MS21314-6: RNCC: 3 | RNVC: 2
NASM760: RNCC: 5 | RNVC: 1
FF-S-760: RNCC: 5 | RNVC: 9
MS21314-6: RNCC: 5 | RNVC: 9
PTT12: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0123
Loop Clamp

001930123
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D10: RNCC: 3 | RNVC: 2
AN735D10: RNCC: 5 | RNVC: 9
10117282: RNCC: 6 | RNVC: 9
5340PL0852907: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-188-3132
Loop Clamp

001883132
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D28: RNCC: 3 | RNVC: 2
AN735D28: RNCC: 3 | RNVC: 9
AN735D28: RNCC: 5 | RNVC: 9
10117281: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-190-6804
Retaining Strap

001906804
NASM21314: RNCC: 3 | RNVC: 1
MS21314-10: RNCC: 3 | RNVC: 2
NASM21314-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0132
Loop Clamp

001930132
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D23: RNCC: 3 | RNVC: 2
AN735D23: RNCC: 3 | RNVC: 9
AS7351D23: RNCC: 5 | RNVC: 2
AN735D23: RNCC: 5 | RNVC: 9
AS7351D23: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-597-9386
Loop Clamp

005979386
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122903: RNCC: 3 | RNVC: 2
10-90203-5: RNCC: 5 | RNVC: 1
10-90203-5: RNCC: 5 | RNVC: 9
10-90203-5: RNCC: 5 | RNVC: 9
MS122903: RNCC: 5 | RNVC: 9
5340PL0926712: RNCC: 6 | RNVC: 9
MS1229-03: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-914-4752
Loop Clamp

009144752
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R12B: RNCC: 3 | RNVC: 2

13 Jul 1966

5340-00-912-8114
Loop Clamp

009128114
NASM21333: RNCC: 3 | RNVC: 1
MS21333-63: RNCC: 3 | RNVC: 2
MS21333-63: RNCC: 5 | RNVC: 9
5340009128114: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-336-8164
Loop Clamp

003368164
8831009: RNCC: 3 | RNVC: 2
9147C500-9: RNCC: 3 | RNVC: 2
540201-010: RNCC: 3 | RNVC: 2
9147C5001-9: RNCC: 3 | RNVC: 2
10031-9: RNCC: 3 | RNVC: 2
1109: RNCC: 3 | RNVC: 2
10031: RNCC: 3 | RNVC: 2
54967-10: RNCC: 3 | RNVC: 2
150-1546-000: RNCC: 3 | RNVC: 2
8168638: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-310-6014
Loop Clamp

003106014
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-8N: RNCC: 3 | RNVC: 2
7A774WD2-8: RNCC: C | RNVC: 1
NAS1714D2-8S: RNCC: C | RNVC: 1

26 Oct 1973

5340-00-291-5322
Loop Clamp

002915322
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG3: RNCC: 3 | RNVC: 2
AS21919WDG3: RNCC: 3 | RNVC: 9
115-10-5: RNCC: 5 | RNVC: 1
MS21919WDG3: RNCC: 5 | RNVC: 2
MS21919WDG3: RNCC: 5 | RNVC: 2
MS21919-3: RNCC: 5 | RNVC: 2
0146314S00: RNCC: 5 | RNVC: 2
115105: RNCC: 5 | RNVC: 2
5C: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-290-3637
Loop Clamp

002903637
T6-6: RNCC: 3 | RNVC: 2
6009-4: RNCC: 3 | RNVC: 2
8176384: RNCC: 3 | RNVC: 2
103049-05: RNCC: 5 | RNVC: 2
907747-05: RNCC: 5 | RNVC: 2
TYPE6 3-8: RNCC: 5 | RNVC: 2
6027086: RNCC: 5 | RNVC: 2
3-8-6: RNCC: 5 | RNVC: 9
F6NY-375BK: RNCC: 5 | RNVC: 9
909C922-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-285-7010
Loop Clamp

002857010
AN742D6: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
755-6: RNCC: 5 | RNVC: 1
5340002857010: RNCC: 5 | RNVC: 9
6026-1001-13: RNCC: 5 | RNVC: 9
10117310: RNCC: 6 | RNVC: 9
5340PL0729452: RNCC: 6 | RNVC: 9
5340002857010: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-280-2223
Dust And Moisture Seal Protective Cap

002802223
10598796-11: RNCC: 1 | RNVC: 2
025-0479-000: RNCC: 3 | RNVC: 2
025-0479-000: RNCC: 5 | RNVC: 2
025-0479-000: RNCC: 5 | RNVC: 2
833945: RNCC: 5 | RNVC: 9
831532: RNCC: 5 | RNVC: 9
025-0482-000: RNCC: 5 | RNVC: 9
025-0479-000: RNCC: 5 | RNVC: 9
831529-00: RNCC: 5 | RNVC: 9
1989884: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-270-8534
Plug Button

002708534
NAS451: RNCC: 3 | RNVC: 1
279-1001P1: RNCC: 3 | RNVC: 2
NAS-451-13: RNCC: 3 | RNVC: 2
NAS451-13: RNCC: 3 | RNVC: 2
9072914: RNCC: 5 | RNVC: 2
48157: RNCC: 5 | RNVC: 9
BACP20B13: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-256-7343
Loop Clamp

002567343
NASM21322: RNCC: 3 | RNVC: 1
MS21322-52: RNCC: 3 | RNVC: 2
MS21322-52: RNCC: 5 | RNVC: 9

26 Mar 1971

5340-00-250-8430
Loop Clamp

002508430
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D40: RNCC: 3 | RNVC: 2
AS5587D40: RNCC: 3 | RNVC: 9
MS21103D40: RNCC: 5 | RNVC: 9
AN742D40: RNCC: 5 | RNVC: 9
MS21103D40: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-664-8165
Loop Clamp

006648165
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG22: RNCC: 3 | RNVC: 2
AS21919WDG22: RNCC: 3 | RNVC: 9
GS14J1488: RNCC: 5 | RNVC: 2
MS21919WDG22: RNCC: 5 | RNVC: 2
MS21919WDG22: RNCC: 5 | RNVC: 2
830WD22R: RNCC: 5 | RNVC: 2
TA025035WDC22HW: RNCC: 5 | RNVC: 2
09A067WD22R: RNCC: 5 | RNVC: 2
946351-1822: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-433-0197
Butt Hinge Leaf

004330197
MS20001Y6-488: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001Y6-488: RNCC: 5 | RNVC: 1

30 Jul 1970

5340-00-741-8569
Grooved Clamp Coupling Ferrule

007418569
11077724-2: RNCC: 3 | RNVC: 2
1673: RNCC: 3 | RNVC: 2
386266-2: RNCC: 5 | RNVC: 2
386266-2: RNCC: 5 | RNVC: 2
11558831-2: RNCC: 5 | RNVC: 2
ST990028-001: RNCC: 5 | RNVC: 2
465-254-01: RNCC: 5 | RNVC: 2
10225895: RNCC: 5 | RNVC: 2
1988-2: RNCC: 5 | RNVC: 9
416-1988-01-12-00: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-839-7941
Loop Clamp

008397941
AN742F48: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-349-1019
Loop Clamp

003491019
NAS1715: RNCC: 3 | RNVC: 1
NAS1715DT2T: RNCC: 3 | RNVC: 2
NAS1715DT2K: RNCC: C | RNVC: 1

30 Jan 1974

5340-00-443-6843
Turnbuckle Body

004436843
MS21251-A5S: RNCC: 2 | RNVC: 2
MS21251A5S: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
21251-A5S: RNCC: 5 | RNVC: 1
MS21251-A5S: RNCC: 5 | RNVC: 1
MS21251-A5S: RNCC: 5 | RNVC: 9
5340PL0940452: RNCC: 6 | RNVC: 9
10193985: RNCC: 6 | RNVC: 9

11 Apr 1969

5340-00-922-3382
Loop Clamp

009223382
MS9350-27: RNCC: 2 | RNVC: 2
MS9350: RNCC: 4 | RNVC: 1

24 Apr 1968

5340-00-347-8576
Loop Clamp

003478576
NAS1715: RNCC: 3 | RNVC: 1
NAS1715DT3T: RNCC: 3 | RNVC: 2

24 Jan 1974

5340-00-775-5259
Loop Clamp

007755259
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C9KH: RNCC: 3 | RNVC: 2
MS9350-08: RNCC: 5 | RNVC: 9

25 Mar 1968

5340-00-471-1913
Loop Clamp

004711913
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587C04: RNCC: 3 | RNVC: 2
AS5587C04: RNCC: 3 | RNVC: 9
MS21103-4: RNCC: 5 | RNVC: 9

22 Sep 1972

5340-00-536-6315
Loop Clamp

005366315
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-12N: RNCC: 3 | RNVC: 2
TA519D8-12: RNCC: E | RNVC: 8

22 Sep 1974

5340-00-372-7100
Angle Bracket

003727100
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-052: RNCC: 3 | RNVC: 2
MS9592-052: RNCC: 5 | RNVC: 9
10117350: RNCC: 6 | RNVC: 9
5342PL0209268: RNCC: 6 | RNVC: 9

12 Mar 1974

5340-00-935-5994
Loop Clamp

009355994
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K5N: RNCC: 3 | RNVC: 2
NAS1397-5B: RNCC: C | RNVC: 1
NAS1397K-5N: RNCC: C | RNVC: 1

8 Mar 1968

5340-00-598-3072
Rim Latch

005983072
5667: RNCC: 3 | RNVC: 2
5604RH: RNCC: 3 | RNVC: 2
58-2: RNCC: 3 | RNVC: 2
5667R: RNCC: 5 | RNVC: 2
7335416: RNCC: 5 | RNVC: 2
5340005983072: RNCC: 5 | RNVC: 9
5604R: RNCC: 5 | RNVC: 9
42-04343: RNCC: 5 | RNVC: 9
5604R: RNCC: 5 | RNVC: 9
5604RH: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-932-8069
Nut And Bolt Retainer

009328069
NAS578: RNCC: 3 | RNVC: 1
NAS578-14B: RNCC: 3 | RNVC: 2
3320-144RET: RNCC: 5 | RNVC: 9

17 Feb 1967

5340-00-948-9787
Nut And Bolt Retainer

009489787
NAS578: RNCC: 3 | RNVC: 1
SLR50-4B: RNCC: 3 | RNVC: 2
NAS578-4B: RNCC: 3 | RNVC: 2
5340PL0846441: RNCC: 6 | RNVC: 9

13 Apr 1966

5340-00-548-6383
Loop Clamp

005486383
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-6N: RNCC: 3 | RNVC: 2
10117395: RNCC: 6 | RNVC: 9

15 Oct 1974

5340-00-401-5966
Spacing Threaded Standoff

004015966
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B04: RNCC: 3 | RNVC: 2
4V10380 ITEM 17: RNCC: 5 | RNVC: 2
8211SS0440-7: RNCC: 5 | RNVC: 9
8211-SS-0440-S: RNCC: 5 | RNVC: 9
ES3684-01B08A08: RNCC: 5 | RNVC: 9
11437857-7: RNCC: 7 | RNVC: 1
2994953-3: RNCC: C | RNVC: 1
ES3684-01B08A08: RNCC: C | RNVC: 1
CAPNUTS18-8STAINLESS: RNCC: E | RNVC: 8

15 Jan 1972

5340-00-883-1734
Angle Bracket

008831734
MS9165-05: RNCC: 2 | RNVC: 2
MS9165: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-401-5772
Spring Tension Clip

004015772
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-032-08C: RNCC: 3 | RNVC: 2
947020-3208: RNCC: 5 | RNVC: 2
6009-194C: RNCC: 5 | RNVC: 9
6009-194C: RNCC: C | RNVC: 1

15 Jan 1972

5340-00-723-7859
Synchro Clamp

007237859
C12: RNCC: 3 | RNVC: 2
L2-4: RNCC: 3 | RNVC: 2
C12: RNCC: 5 | RNVC: 2
7200418P4: RNCC: 5 | RNVC: 2
711698-20: RNCC: 5 | RNVC: 2
9195432: RNCC: 5 | RNVC: 2
24941-6: RNCC: 5 | RNVC: 9
1784019 PIECE 4: RNCC: 5 | RNVC: 9
10068322: RNCC: 5 | RNVC: 9
409756-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-1239
Dust And Moisture Seal Protective Plug

008041239
NAS847: RNCC: 3 | RNVC: 1
NAS842-5A: RNCC: 3 | RNVC: 2
M5501/2-5: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE5: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-619-7754
Loop Clamp

006197754
HP3N: RNCC: 3 | RNVC: 2
57A5A182-20: RNCC: 5 | RNVC: 2
672B452P2: RNCC: 5 | RNVC: 2
C42107A56C946: RNCC: 5 | RNVC: 2
010326: RNCC: 5 | RNVC: 2
5800332-9009-044: RNCC: 5 | RNVC: 2
99024229: RNCC: 5 | RNVC: 2
3522 500 22833: RNCC: 5 | RNVC: 2
710-0002: RNCC: 5 | RNVC: 2
115841-001: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-649-8486
Nut And Bolt Retainer

006498486
NAS578: RNCC: 3 | RNVC: 1
NAS578-7B: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-893-6728
Nut And Bolt Retainer

008936728
NAS578: RNCC: 3 | RNVC: 1
NAS578-6A: RNCC: 3 | RNVC: 2
NAS578-6A: RNCC: 5 | RNVC: 2
2577-064RET: RNCC: 5 | RNVC: 9
10117494: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-496-5832
Dust And Moisture Seal Protective Cap

004965832
SAE-AS85049/138: RNCC: 3 | RNVC: 1
M85049/138-29A: RNCC: 3 | RNVC: 2
M85049/138-29A: RNCC: 3 | RNVC: 9
494115000900: RNCC: 5 | RNVC: 2
MS90376-16Y: RNCC: 5 | RNVC: 2
MS90376-16Y: RNCC: 5 | RNVC: 9
MS90376-16Y: RNCC: 5 | RNVC: 9
KAPPEMB10R14: RNCC: 5 | RNVC: 9
MS90376-16Y: RNCC: 5 | RNVC: 9
FC-715: RNCC: 5 | RNVC: 9

1 Oct 1969

5340-00-533-9089
Spring Tension Clip

005339089
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-318: RNCC: 3 | RNVC: 2
100-200-5-47: RNCC: 5 | RNVC: 1
M24066/2-318: RNCC: 5 | RNVC: 9
MS17160-18: RNCC: 5 | RNVC: 9
3172620-7: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9

14 Sep 1974

5340-00-531-6701
Hinged Hasp

005316701
FFH111-F1405: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH111ATYPEF1405: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-905-8716
Loop Clamp

009058716
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P12N: RNCC: 3 | RNVC: 2
3-4H: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-905-2691
Loop Clamp

009052691
NASM21333: RNCC: 3 | RNVC: 1
MS21333-12: RNCC: 3 | RNVC: 2
NASM21333-12: RNCC: 5 | RNVC: 9
MS21333-12: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-904-3705
Loop Clamp

009043705
NASM21333: RNCC: 3 | RNVC: 1
MS21333-82: RNCC: 3 | RNVC: 2
MS21333-82: RNCC: 5 | RNVC: 9

17 Jun 1966

5340-00-903-3066
Spring Tension Clip

009033066
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-313: RNCC: 3 | RNVC: 2
336253-13: RNCC: 5 | RNVC: 1
7904025-00: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-313: RNCC: 5 | RNVC: 9
MS17160-13: RNCC: 5 | RNVC: 9
M24066/2-013: RNCC: 5 | RNVC: 9
6015-4A/010: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-663-1340
Loop Clamp

006631340
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122912: RNCC: 3 | RNVC: 2
MS122912: RNCC: 3 | RNVC: 9
MS122912: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-660-1570
Dust And Moisture Seal Protective Cap

006601570
MST220B YELLOW: RNCC: 3 | RNVC: 2
MST-220 YELLOW: RNCC: 5 | RNVC: 9
1604-220Y: RNCC: 5 | RNVC: 9
1604-220: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-570-3600
Sealing Plug Assembly

005703600
PLGA2810010A: RNCC: 3 | RNVC: 2
PLGA2810010A: RNCC: 5 | RNVC: 2
218940: RNCC: 5 | RNVC: 2
967C314-2: RNCC: 5 | RNVC: 9
ST7M141D9S: RNCC: 5 | RNVC: 9
967C314-2: RNCC: 5 | RNVC: 9
21890: RNCC: 5 | RNVC: 9
3AB: RNCC: 5 | RNVC: 9
PLGA2810010: RNCC: 5 | RNVC: 9
SP780-007: RNCC: 5 | RNVC: 9

1 Dec 1974

5340-00-410-2978
Angle Bracket

004102978
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-014: RNCC: 3 | RNVC: 2
MS9592-014: RNCC: 3 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 1
9682013405: RNCC: 5 | RNVC: 2
MS9592-014: RNCC: 5 | RNVC: 9
AS9592: RNCC: 5 | RNVC: 9
968.20.13.405: RNCC: 5 | RNVC: 9

15 Aug 1969

5340-00-655-7761
Retaining Strap

006557761
NASM760: RNCC: 3 | RNVC: 1
MS35140-12: RNCC: 3 | RNVC: 2
120875: RNCC: 5 | RNVC: 1
120875: RNCC: 5 | RNVC: 1
120875: RNCC: 5 | RNVC: 1
7062946: RNCC: 5 | RNVC: 1
MS35140-12: RNCC: 5 | RNVC: 9
5340006557761: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-488-5930
Spring Tension Clip

004885930
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-327: RNCC: 3 | RNVC: 2
336253-27: RNCC: 5 | RNVC: 1
100-200-11-8: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
MS17160-27: RNCC: 5 | RNVC: 9
M24066/2-327: RNCC: 5 | RNVC: 9
M24066/2-127: RNCC: C | RNVC: 1

22 May 1970

5340-00-804-1220
Dust And Moisture Seal Protective Plug

008041220
NAS847: RNCC: 3 | RNVC: 1
NAS842-12A: RNCC: 3 | RNVC: 2
MIL-C-5501/2: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-804-0790
Dust And Moisture Seal Protective Cap

008040790
NAS835: RNCC: 3 | RNVC: 1
NAS835-3A: RNCC: 3 | RNVC: 2
MILC5501TYPE2CLASSASIZE3: RNCC: 5 | RNVC: 9
M5501/3-3: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-696-0266
Butt Hinge Leaf

006960266
7373323: RNCC: 3 | RNVC: 2
MIL-P-14553: RNCC: 4 | RNVC: 1
TT-E-529: RNCC: 4 | RNVC: 1
TT-P-664: RNCC: 4 | RNVC: 1
TT-C-490: RNCC: 4 | RNVC: 1
1277550: RNCC: 5 | RNVC: 2
103599R1: RNCC: 5 | RNVC: 2
955682: RNCC: 5 | RNVC: 9
KC8438: RNCC: 5 | RNVC: 9
5340006960266: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-164-9613
Angle Bracket

011649613
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-060: RNCC: 3 | RNVC: 2
AS9592: RNCC: 5 | RNVC: 1
AS9592: RNCC: 5 | RNVC: 9
MS9592-060: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-01-165-1451
Loop Clamp

011651451
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D20T: RNCC: 3 | RNVC: 2
TA11C82-D20HB: RNCC: 3 | RNVC: 2

26 Oct 1983

5340-01-044-0985
Retaining Strap

010440985
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D15W55N: RNCC: 3 | RNVC: 2

7 Jul 1977

5340-01-054-4935
Butt Hinge

010544935
AA55590-10A: RNCC: 2 | RNVC: 2
A-A-55590-10A: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-10A: RNCC: 5 | RNVC: 9
MS35822-10A: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-01-054-1584
Butt Hinge

010541584
A-A-55592-10C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
12664: RNCC: 5 | RNVC: 1
MS35825-10C: RNCC: 5 | RNVC: 1
MS35825-10C: RNCC: 5 | RNVC: 9
25070: RNCC: C | RNVC: 1
68C22664-1: RNCC: C | RNVC: 1
508361: RNCC: C | RNVC: 1

15 Jan 1978

5340-01-053-7180
Loop Clamp

010537180
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-24N: RNCC: 3 | RNVC: 2
10117576: RNCC: 6 | RNVC: 9

9 Jan 1978

5340-01-054-1583
Butt Hinge

010541583
AA55592-9C: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-9C: RNCC: 5 | RNVC: 1
MS35825-9C: RNCC: 5 | RNVC: 9
435-5940848 ITE: RNCC: C | RNVC: 1

15 Jan 1978

5340-01-054-4936
Butt Hinge

010544936
AA55590-11A: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS35822-11A: RNCC: 5 | RNVC: 9
MS35822-11A: RNCC: 5 | RNVC: 9

21 Jan 1978

5340-01-053-7128
Butt Hinge

010537128
AA55591-7A: RNCC: 2 | RNVC: 2
A-A-55591: RNCC: 4 | RNVC: 1
MS35823-7A: RNCC: 5 | RNVC: 1
MS35823-7A: RNCC: 5 | RNVC: 9
5589424: RNCC: 5 | RNVC: 9
5589425: RNCC: 5 | RNVC: 9

9 Jan 1978

5340-01-043-7945
Loop Clamp

010437945
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-16S: RNCC: 3 | RNVC: 2

1 Jul 1977

5340-01-043-4795
Loop Clamp

010434795
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT6K: RNCC: 3 | RNVC: 2

24 Jun 1977

5340-01-039-7222
Electronic Equipment Hardware Kit

010397222
4804TO-3: RNCC: 3 | RNVC: 2
B57198: RNCC: 5 | RNVC: 2
CV0069-001: RNCC: 5 | RNVC: 2
CV0070-002: RNCC: 5 | RNVC: 2
3595761-1: RNCC: 5 | RNVC: 2
247AS-C2446-001: RNCC: 5 | RNVC: 2
4008784-003: RNCC: 5 | RNVC: 2
600143P1: RNCC: 5 | RNVC: 2
ASC1568980: RNCC: 5 | RNVC: 9
4804: RNCC: 5 | RNVC: 9

25 Apr 1977

5340-01-025-7981
Loop Clamp

010257981
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-16N: RNCC: 3 | RNVC: 2
10117554: RNCC: 6 | RNVC: 9

9 Aug 1976

5340-01-009-6848
Spring Tension Clip

010096848
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-346: RNCC: 3 | RNVC: 2
100-200-18-16: RNCC: 5 | RNVC: 1
M24066/2-346: RNCC: 5 | RNVC: 9
MIL-C-24066: RNCC: 5 | RNVC: 9
M24066-2-146: RNCC: C | RNVC: 1

14 Sep 1975

5340-00-993-6207
Loop Clamp

009936207
NASM21333: RNCC: 3 | RNVC: 1
MS21333-99: RNCC: 3 | RNVC: 2
MS21333-99: RNCC: 5 | RNVC: 9
5340009936207: RNCC: 5 | RNVC: 9
5340PL0970285: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-985-6733
Loop Clamp

009856733
NASM21334: RNCC: 3 | RNVC: 1
MS21334-37: RNCC: 3 | RNVC: 2
MS21334-37: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-984-1656
Clamp Bolt Assembly

009841656
NAS573: RNCC: 3 | RNVC: 1
NAS573-12: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-906-0707
Instrument Mounting Clamp

009060707
NASM28042: RNCC: 3 | RNVC: 1
NBG61911: RNCC: 3 | RNVC: 2
19137-4: RNCC: 3 | RNVC: 2
MS28042-4A: RNCC: 3 | RNVC: 2
NBG61911: RNCC: 5 | RNVC: 2
NASM28042-4A: RNCC: 5 | RNVC: 9
MS28042-4: RNCC: 5 | RNVC: 9
MS28042-4A: RNCC: 5 | RNVC: 9
640001: RNCC: 5 | RNVC: 9
41C300-4: RNCC: 5 | RNVC: 9

22 Jun 1966

5340-00-286-2479
Snap Hook

002862479
NAS1282: RNCC: 3 | RNVC: 1
NAS1282C12: RNCC: 3 | RNVC: 2
NAS1282C12: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-340-4576
Loop Clamp

003404576
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C22KWX: RNCC: 3 | RNVC: 2
MS21122C22: RNCC: 5 | RNVC: 1
NAS1715C22KWX: RNCC: 5 | RNVC: 9

6 Jan 1974

5340-00-833-3049
Loop Clamp

008333049
NASM21333: RNCC: 3 | RNVC: 1
MS21333-127: RNCC: 3 | RNVC: 2
5340008333049: RNCC: 5 | RNVC: 9
MS21333-127: RNCC: 5 | RNVC: 9
456720127904: RNCC: 6 | RNVC: 9

13 Sep 1967

5340-00-286-9423
Loop Clamp

002869423
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF06: RNCC: 3 | RNVC: 2
AS21919WDF06: RNCC: 3 | RNVC: 9
AS21919WDF06: RNCC: 5 | RNVC: 2
MS21919WDF6: RNCC: 5 | RNVC: 2
MS21919WDF6: RNCC: 5 | RNVC: 2
MS21104D6: RNCC: 5 | RNVC: 9
5340002869423: RNCC: 5 | RNVC: 9
MS21919WDF6: RNCC: 5 | RNVC: 9
10117316: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-186-3411
Loop Clamp

001863411
AN742D21: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-051-9132
Butt Hinge

000519132
MS20257P3-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
AN257P3-7200: RNCC: 5 | RNVC: 1
MS20257P3-7200: RNCC: 5 | RNVC: 1
MS20257PC-1500: RNCC: 5 | RNVC: 9
MS20257P3-7150: RNCC: 5 | RNVC: 9
MS20257P3-150: RNCC: 5 | RNVC: 9
MS20257P3-200: RNCC: 5 | RNVC: 9
MS20257P3-950: RNCC: 5 | RNVC: 9
MS20257P3-2300: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-033-5076
Loop Clamp

010335076
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C6KW: RNCC: 3 | RNVC: 2
NAS1715C6K: RNCC: C | RNVC: 1

7 Jan 1977

5340-01-126-1320
Loop Clamp

011261320
M85052/1-2: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
JM44LC70PH2YN: RNCC: 5 | RNVC: 1
SS7563-2NBC: RNCC: 5 | RNVC: 1
JM44LC 70WPH2YN: RNCC: 5 | RNVC: 1
9M972-2N: RNCC: 5 | RNVC: 1
1444PHW2Y: RNCC: 5 | RNVC: 1
TA026-0001-02NB: RNCC: 5 | RNVC: 1
S664NB2: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9

5 Feb 1982

5340-01-115-4619
Turnbuckle

011154619
G-228 3/4X12: RNCC: 3 | RNVC: 1
61-94-1042: RNCC: 3 | RNVC: 2
13230E4697: RNCC: 3 | RNVC: 2
2350-5900-059: RNCC: 5 | RNVC: 1
ASTM-F1145: RNCC: 5 | RNVC: 1
ASTM-F1145 TY1 GR1 CLG: RNCC: 5 | RNVC: 1
61-11-1042: RNCC: 5 | RNVC: 1
FF-T-791: RNCC: 5 | RNVC: 9
FF-T-791 TY 1 FM 1 CL 7: RNCC: 5 | RNVC: 9
HG-228: RNCC: C | RNVC: 1

7 Jul 1981

5340-01-122-4848
Loop Clamp

011224848
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-8NW: RNCC: 3 | RNVC: 2

21 Nov 1981

5340-01-178-5983
Padlock Set

011785983
AA59486-2IB15: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1

8 May 1984

5340-01-099-8158
Loop Clamp

010998158
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C13KWX: RNCC: 3 | RNVC: 2
MS21122C13: RNCC: 5 | RNVC: 9

23 Aug 1980

5340-01-099-1436
Retaining Strap

010991436
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C7-13N: RNCC: 3 | RNVC: 2

13 Aug 1980

5340-01-097-8277
Dust And Moisture Seal Protective Cap

010978277
NAS832: RNCC: 3 | RNVC: 1
NAS832-8: RNCC: 3 | RNVC: 2
M5501/11-F9: RNCC: 5 | RNVC: 9
MIL-C-5501/11: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-01-144-5870
Retaining Strap

011445870
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D28W40N: RNCC: 3 | RNVC: 2

23 Dec 1982

5340-01-148-3757
Webbing Strap

011483757
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R20C64: RNCC: 3 | RNVC: 2

4 Mar 1983

5340-01-131-5576
Loop Clamp

011315576
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C8-15S: RNCC: 3 | RNVC: 2
10112587: RNCC: 6 | RNVC: 9

12 May 1982

5340-01-189-6000
Arched Cushion

011896000
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-05: RNCC: 3 | RNVC: 2
MS9393-05: RNCC: 3 | RNVC: 9
AS9393: RNCC: 5 | RNVC: 1
AS9393: RNCC: 5 | RNVC: 9
MS9393-05: RNCC: 5 | RNVC: 9

17 Sep 1984

5340-01-129-7017
Loop Clamp

011297017
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-14N: RNCC: 3 | RNVC: 2

9 Apr 1982

5340-01-126-9179
Loop Clamp

011269179
M85052/3-14: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000114HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112502: RNCC: 6 | RNVC: 9

19 Feb 1982

5340-01-138-6567
Bail Handle

011386567
MS18012-4: RNCC: 2 | RNVC: 2
MS18012: RNCC: 4 | RNVC: 1
1404438: RNCC: 5 | RNVC: 1
945SS2RG: RNCC: 5 | RNVC: 9
945SS2RG: RNCC: 5 | RNVC: 9
1404438: RNCC: 5 | RNVC: 9
945SS2RG: RNCC: C | RNVC: 1

17 Sep 1982

5340-01-154-2314
Dust And Moisture Seal Protective Plug

011542314
NAS838: RNCC: 3 | RNVC: 1
NAS838-4: RNCC: 3 | RNVC: 2
M5501/2-R4: RNCC: 5 | RNVC: 9
MIL-C-5501: RNCC: 5 | RNVC: 9

23 May 1983

5340-01-113-0912
Loop Clamp

011130912
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-16NW: RNCC: 3 | RNVC: 2

15 May 1981

5340-01-177-9747
Spacing Threaded Standoff

011779747
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B04: RNCC: 3 | RNVC: 2
NAS1786C04-4: RNCC: 5 | RNVC: 9
NAS1786-04-4: RNCC: C | RNVC: 1
1786C04-4: RNCC: C | RNVC: 1
NAS1831-3B04: RNCC: C | RNVC: 1
S07-1: RNCC: C | RNVC: 1
NAS51831-3804: RNCC: C | RNVC: 1

30 Apr 1984

5340-01-177-3040
Dust And Moisture Seal Protective Plug

011773040
NAS847: RNCC: 3 | RNVC: 1
NAS845-15: RNCC: 3 | RNVC: 2
MIL-C-5501/10: RNCC: 5 | RNVC: 9
M5501/10-F14: RNCC: 5 | RNVC: 9
2635170: RNCC: E | RNVC: 8

23 Apr 1984

5340-01-081-9742
Retaining Strap

010819742
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10W43N: RNCC: 3 | RNVC: 2

23 Aug 1979

5340-01-015-3048
Angle Bracket

010153048
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-258: RNCC: 3 | RNVC: 2
MS9593-258: RNCC: 3 | RNVC: 9
MS9593-258: RNCC: 5 | RNVC: 9

17 Jan 1976

5340-00-482-9444
Angle Bracket

004829444
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-024: RNCC: 3 | RNVC: 2
MS9592-024: RNCC: 3 | RNVC: 9
MS9592-024: RNCC: 5 | RNVC: 9
5342PL0210984: RNCC: 6 | RNVC: 9

3 Feb 1971

5340-01-088-6303
Clamp Bolt Assembly

010886303
M85731/1-6A: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MIL-F-85731/1B: RNCC: 5 | RNVC: 9
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-6A: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-00-349-8367
Electrical-Mechanical Equipment Post

003498367
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A14: RNCC: 3 | RNVC: 2
C210: RNCC: 5 | RNVC: 2
532353-210: RNCC: 5 | RNVC: 2
8110SS0256-7: RNCC: 5 | RNVC: 9
10163900: RNCC: 6 | RNVC: 9
8110SS0256-7: RNCC: C | RNVC: 1

26 Mar 1971

5340-01-132-8957
Retaining Strap

011328957
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-36N: RNCC: 3 | RNVC: 2
10112638: RNCC: 6 | RNVC: 9

5 Jun 1982

5340-01-193-7418
Electrical-Mechanical Equipment Post

011937418
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C21: RNCC: 3 | RNVC: 2
NAS1786C06-21: RNCC: C | RNVC: 1

7 Nov 1984

5340-01-121-2045
Spring Tension Clip

011212045
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-065-10C: RNCC: 3 | RNVC: 2
4521-65-100-2C: RNCC: 5 | RNVC: 2
4521-65-100-2: RNCC: C | RNVC: 1

31 Oct 1981

5340-01-121-0022
Loop Clamp

011210022
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-22N: RNCC: 3 | RNVC: 2

28 Oct 1981

5340-01-132-4663
Spring Tension Clip

011324663
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-304: RNCC: 3 | RNVC: 2
M24066/2-304: RNCC: 5 | RNVC: 9
MIL-C-24066: RNCC: 5 | RNVC: 9
MS141604: RNCC: C | RNVC: 1

30 May 1982

5340-01-172-8838
Loop Clamp

011728838
MS9350-14: RNCC: 2 | RNVC: 2
MS9350: RNCC: 4 | RNVC: 1

27 Feb 1984

5340-01-193-7413
Electrical-Mechanical Equipment Post

011937413
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C16: RNCC: 3 | RNVC: 2
8399-SS-0632-7: RNCC: C | RNVC: 1
8399-SS-0632-7: RNCC: C | RNVC: 1
5399618-6: RNCC: C | RNVC: 1
399-SS-0632-7: RNCC: C | RNVC: 1

7 Nov 1984

5340-01-132-0040
Loop Clamp

011320040
NAS1714: RNCC: 3 | RNVC: 1
NAS1714DT2-4KW: RNCC: 3 | RNVC: 2
10112606: RNCC: 6 | RNVC: 9

20 May 1982

5340-00-579-6359
Instrument Mounting Clamp

005796359
NASM28042: RNCC: 3 | RNVC: 1
MS28042-2A: RNCC: 3 | RNVC: 2
AN5808-2: RNCC: 5 | RNVC: 2
MS28042-2A: RNCC: 5 | RNVC: 9
50B9800C: RNCC: 5 | RNVC: 9
600-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-174-0650
Loop Clamp

011740650
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D3-3S: RNCC: 3 | RNVC: 2

14 Mar 1984

5340-01-133-9610
Loop Clamp

011339610
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-32N: RNCC: 3 | RNVC: 2
10112652: RNCC: 6 | RNVC: 9

23 Jun 1982

5340-01-194-3189
Spring Tension Clip

011943189
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-014-05C: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-01-047-9315
Loop Clamp

010479315
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C6S: RNCC: 3 | RNVC: 2
509SS6: RNCC: C | RNVC: 1

16 Sep 1977

5340-01-086-8908
Loop Clamp

010868908
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C12S: RNCC: 3 | RNVC: 2

6 Dec 1979

5340-01-184-7851
Catch Strike

011847851
M85731/1-11: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
3M976-1: RNCC: 5 | RNVC: 9
MS14108-11: RNCC: 5 | RNVC: 9
10163931: RNCC: 6 | RNVC: 9

23 Jul 1984

5340-01-137-7173
Loop Clamp

011377173
M85052/3-2: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112687: RNCC: 6 | RNVC: 9

1 Sep 1982

5340-01-197-5045
Electrical-Mechanical Equipment Post

011975045
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5D32: RNCC: 3 | RNVC: 2

21 Dec 1984

5340-01-205-5967
Webbing Strap

012055967
NAS1212: RNCC: 3 | RNVC: 1
NAS1212P17AA24: RNCC: 3 | RNVC: 2

9 Apr 1985

5340-01-199-9681
Retaining Strap

011999681
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D14-30N: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-01-153-9426
Loop Clamp

011539426
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D22-14T: RNCC: 3 | RNVC: 2
10112786: RNCC: 6 | RNVC: 9

18 May 1983

5340-01-308-6246
Dust And Moisture Seal Protective Plug

013086246
6Y0473: RNCC: 3 | RNVC: 2
6Y-0473: RNCC: 5 | RNVC: 2

1 Oct 1989

5340-01-292-3723
Spring Tension Clip

012923723
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-14C: RNCC: 3 | RNVC: 2

14 Jan 1989

5340-01-291-4638
Retaining Strap

012914638
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D28W44N: RNCC: 3 | RNVC: 2
10086887: RNCC: 6 | RNVC: 9

28 Dec 1988

5340-01-227-8756
Rod End Locking Retainer

012278756
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K22CP: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-01-216-9110
Loop Clamp

012169110
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-21N: RNCC: 3 | RNVC: 2

18 Sep 1985

5340-01-213-9669
Snap-In Threaded Standoff

012139669
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B07: RNCC: 3 | RNVC: 2
3267024: RNCC: 5 | RNVC: 2
NAS1786C04-07: RNCC: 5 | RNVC: 9

4 Aug 1985

5340-01-212-0623
Electrical-Mechanical Equipment Post

012120623
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B09: RNCC: 3 | RNVC: 2
10129635: RNCC: 6 | RNVC: 9

6 Jul 1985

5340-01-252-6344
Retaining Strap

012526344
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D6-12N: RNCC: 3 | RNVC: 2

5 Apr 1987

5340-01-209-9693
Electrical-Mechanical Equipment Post

012099693
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C64: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-01-280-6243
Arched Cushion

012806243
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-01: RNCC: 3 | RNVC: 2
MS9393-01: RNCC: 5 | RNVC: 9

13 Jun 1988

5340-01-232-8495
Spacing Threaded Standoff

012328495
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B03: RNCC: 3 | RNVC: 2
860314-57: RNCC: 5 | RNVC: 9
10110184: RNCC: 6 | RNVC: 9
2052-440-SS-20: RNCC: E | RNVC: 8
SS-3801-440-12: RNCC: E | RNVC: 8
SP440H3C: RNCC: E | RNVC: 8
8101SS0440-7: RNCC: E | RNVC: 8
2504203-32: RNCC: E | RNVC: 8
537AS629-3: RNCC: E | RNVC: 8

21 May 1986

5340-01-229-8313
Loop Clamp

012298313
AA-52406-40HE: RNCC: 2 | RNVC: 2
AA52406-40: RNCC: 2 | RNVC: 2
A-A-52406: RNCC: 4 | RNVC: 1
MS52150-40HE: RNCC: 5 | RNVC: 9
AA52406-40HE: RNCC: 5 | RNVC: 9

6 Apr 1986

5340-01-223-1772
Spacing Threaded Standoff

012231772
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B12: RNCC: 3 | RNVC: 2
12619217: RNCC: 5 | RNVC: 1
8218-A-0440-16: RNCC: 5 | RNVC: 2
8218-A-0440-16: RNCC: 5 | RNVC: 2
1648097-1: RNCC: 5 | RNVC: 2
P-545-M06-F12-44: RNCC: 5 | RNVC: 2
2108-440A7: RNCC: 5 | RNVC: 9
8218-A-0440-16: RNCC: 5 | RNVC: 9
G247-026-110: RNCC: C | RNVC: 1

23 Dec 1985

5340-01-218-4373
Electrical-Mechanical Equipment Post

012184373
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C28: RNCC: 3 | RNVC: 2
411750: RNCC: 3 | RNVC: 2
8350: RNCC: 5 | RNVC: 2
1819: RNCC: 5 | RNVC: 2
12922216: RNCC: 5 | RNVC: 2
8350: RNCC: 5 | RNVC: 9
8172-A-0632-10: RNCC: 5 | RNVC: 9
HW-T0024-003: RNCC: 7 | RNVC: 2
8172-A-0632-10: RNCC: C | RNVC: 1

11 Oct 1985

5340-01-291-5709
Angle Bracket

012915709
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-008: RNCC: 3 | RNVC: 2
MS9593-008: RNCC: 5 | RNVC: 9

30 Dec 1988

5340-01-291-2110
Spacing Threaded Standoff

012912110
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B07: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-01-233-1406
Spacing Threaded Standoff

012331406
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4B06: RNCC: 3 | RNVC: 2

26 May 1986

5340-01-219-9222
Loop Clamp

012199222
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C10K: RNCC: 3 | RNVC: 2
90595: RNCC: 5 | RNVC: 2

5 Nov 1985

5340-01-284-3836
Bow Handle

012843836
NASM39087: RNCC: 3 | RNVC: 1
MS39087-405CP: RNCC: 3 | RNVC: 2
MS39087-405CP: RNCC: 5 | RNVC: 9
MS39087-203CP: RNCC: 5 | RNVC: 9
MS39087-405P: RNCC: C | RNVC: 1

23 Aug 1988

5340-01-344-3374
Butt Hinge Leaf

013443374
MS20001Y12-3310: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

27 Aug 1991

5340-01-284-2563
Loop Clamp

012842563
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D6T: RNCC: 3 | RNVC: 2

20 Aug 1988

5340-01-270-8953
Electrical-Mechanical Equipment Post

012708953
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-3B08: RNCC: 3 | RNVC: 2

15 Jan 1988

5340-01-343-9955
Butt Hinge

013439955
MS20001P5-1000: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

20 Aug 1991

5340-01-330-0537
Angle Bracket

013300537
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-054: RNCC: 3 | RNVC: 2
AS9600-054: RNCC: 3 | RNVC: 9
AS9600-054: RNCC: 5 | RNVC: 9
MS9600-054: RNCC: 5 | RNVC: 9

29 Nov 1990

5340-01-259-4681
Electrical-Mechanical Equipment Post

012594681
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C18: RNCC: 3 | RNVC: 2

18 Jul 1987

5340-01-324-4494
Catch Strike

013244494
M85731/1-12C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MS14108: RNCC: 5 | RNVC: 9
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-12C: RNCC: 5 | RNVC: 9

19 Aug 1990

5340-01-272-7642
Rod End Locking Retainer

012727642
NAS1193: RNCC: 3 | RNVC: 1
NAS1193E7CP: RNCC: 3 | RNVC: 2

13 Feb 1988

5340-01-345-2743
Retaining Strap

013452743
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24-26S: RNCC: 3 | RNVC: 2

14 Sep 1991

5340-01-332-0935
Bow Handle

013320935
NASM39087: RNCC: 3 | RNVC: 1
MS39087-412CP: RNCC: 3 | RNVC: 2
MS39087-412CP: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-01-323-4325
Loop Clamp

013234325
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C5ZH: RNCC: 3 | RNVC: 2
MS9826-04: RNCC: 5 | RNVC: 9

27 Jul 1990

5340-01-274-5777
Rod End Locking Retainer

012745777
NAS1193: RNCC: 3 | RNVC: 1
NAS1193E20CP: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-01-243-6552
Electrical-Mechanical Equipment Post

012436552
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C06: RNCC: 3 | RNVC: 2
4164650-1: RNCC: 5 | RNVC: 2

30 Oct 1986

5340-01-255-9586
Loop Clamp

012559586
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-4T: RNCC: 3 | RNVC: 2

30 May 1987

5340-01-242-1026
Spacing Threaded Standoff

012421026
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B05: RNCC: 3 | RNVC: 2

7 Oct 1986

5340-01-322-6092
Loop Clamp

013226092
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCE08: RNCC: 3 | RNVC: 2
MS21919WCE8: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-01-302-6157
Butt Hinge

013026157
MS20001P12-787: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

16 Jun 1989

5340-01-273-1749
Butt Hinge Leaf

012731749
MS20001LPX4-2000: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
70550-01125-108: RNCC: 5 | RNVC: 1
MS20001PX4-2000: RNCC: 5 | RNVC: 9
MS20001PX4-300: RNCC: 5 | RNVC: 9
MS20001PX4-650: RNCC: 5 | RNVC: 9

21 Feb 1988

5340-01-303-7870
Retaining Strap

013037870
SAE-AS9394: RNCC: 3 | RNVC: 1
MS9394-04: RNCC: 3 | RNVC: 2
MS9394-04: RNCC: 5 | RNVC: 9

5 Jul 1989

5340-01-289-2604
Webbing Strap

012892604
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10KK9: RNCC: 3 | RNVC: 2

18 Nov 1988

5340-01-349-2735
Angle Bracket

013492735
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-096: RNCC: 3 | RNVC: 2
MS9592-096: RNCC: 5 | RNVC: 9

23 Nov 1991

5340-01-326-5023
Mending Plate

013265023
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-038: RNCC: 3 | RNVC: 2
MS9552-038: RNCC: 3 | RNVC: 9
MS9552-038: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-01-250-9278
Electrical-Mechanical Equipment Post

012509278
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6E48: RNCC: 3 | RNVC: 2
NAS1786A3-48: RNCC: 5 | RNVC: 9

9 Mar 1987

5340-01-337-4201
Turnbuckle Body

013374201
NASM27954: RNCC: 3 | RNVC: 1
MS27954-13: RNCC: 3 | RNVC: 2
MS27954-13: RNCC: 5 | RNVC: 9
MS27594-13: RNCC: 5 | RNVC: 9

14 Apr 1991

5340-01-358-4348
Loop Clamp

013584348
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC6: RNCC: 3 | RNVC: 2
AN735DC6: RNCC: 5 | RNVC: 9

14 May 1992

5340-01-369-8617
Retaining Strap

013698617
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C11-54N: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-01-359-4436
Retaining Strap

013594436
NASM85449/1: RNCC: 3 | RNVC: 1
M85449/1-32: RNCC: 3 | RNVC: 2
NASM85449/1-32: RNCC: 5 | RNVC: 9
MIL-C-85449/1: RNCC: 5 | RNVC: 9
M85449/1-32: RNCC: 5 | RNVC: 9

5 Jun 1992

5340-01-352-1230
Loop Clamp

013521230
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C12KW: RNCC: 3 | RNVC: 2
5340PL0805125: RNCC: 6 | RNVC: 9

19 Jan 1992

5340-01-453-3587
Loop Clamp

014533587
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735C7: RNCC: 3 | RNVC: 2
AN735C7: RNCC: 5 | RNVC: 9

26 Feb 1998

5340-01-443-8084
Retaining Strap

014438084
NASM85449/1: RNCC: 3 | RNVC: 1
M85449/1-10: RNCC: 3 | RNVC: 2
M85449/1-10: RNCC: 5 | RNVC: 9

18 Apr 1997

5340-01-451-5926
Retaining Strap

014515926
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C10-26T: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-01-386-3511
Loop Clamp

013863511
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCJ-35: RNCC: 3 | RNVC: 2
AS21919WCJ35: RNCC: 3 | RNVC: 2
AS21919WCJ-35: RNCC: 3 | RNVC: 9
MS21919WCJ-35: RNCC: 5 | RNVC: 9
MIL-C-8603: RNCC: 5 | RNVC: 9

3 Feb 1994

Load More Results