What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 13 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 13 of 1045

5340-00-942-2201
Loop Clamp

009422201
SAE-AS9391: RNCC: 3 | RNVC: 1
MS9391-05: RNCC: 3 | RNVC: 2
MS9391-05: RNCC: 3 | RNVC: 9
MS9391-05: RNCC: 5 | RNVC: 9

25 Dec 1965

5340-01-004-0118
Loop Clamp

010040118
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D3-6NW: RNCC: 3 | RNVC: 2

15 May 1975

5340-00-671-5938
Support Hook

006715938
NAS622: RNCC: 3 | RNVC: 1
NAS622CE3: RNCC: 3 | RNVC: 2
NAS622CEB: RNCC: C | RNVC: 1
NAS22CE3: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-187-8185
Turnbuckle

001878185
FFT791-TY1-FM1-CL4-5/16X4 1/2: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-187-5664
Spring Tension Clip

001875664
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-328: RNCC: 3 | RNVC: 2
336253-28: RNCC: 5 | RNVC: 1
M24066/2-128: RNCC: 5 | RNVC: 9
M24066-2-328: RNCC: 5 | RNVC: 9
6017-76A: RNCC: 5 | RNVC: 9
MS17160-28: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
NASM24066/2-328: RNCC: 5 | RNVC: 9
M24066-2-128: RNCC: C | RNVC: 1

10 Sep 1972

5340-00-186-3418
Loop Clamp

001863418
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D14: RNCC: 3 | RNVC: 2
AS5587D14: RNCC: 3 | RNVC: 9
0310-18: RNCC: 5 | RNVC: 9
AN742D14: RNCC: 5 | RNVC: 9
0310-18: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-186-3408
Loop Clamp

001863408
AN742D24: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
SS7562A150: RNCC: 5 | RNVC: 1
5340PL0727333: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-186-3401
Loop Clamp

001863401
AN742D43: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-186-3392
Loop Clamp

001863392
AN742D30: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
742130: RNCC: 5 | RNVC: 2
68925030: RNCC: 5 | RNVC: 2
AN742D30: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-057-3034
Loop Clamp

000573034
NASM21333: RNCC: 3 | RNVC: 1
MS21333-110: RNCC: 3 | RNVC: 2
CMDX2-3PART573034: RNCC: 5 | RNVC: 2
5340000573034: RNCC: 5 | RNVC: 9
MS21333-110: RNCC: 5 | RNVC: 9
5340000573034: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-056-5429
Synchro Clamp

000565429
10237248-2: RNCC: 3 | RNVC: 2
11780320-2: RNCC: 3 | RNVC: 2
215-013-0016: RNCC: 3 | RNVC: 2
409074: RNCC: 3 | RNVC: 2
309074: RNCC: 3 | RNVC: 2
960637-1: RNCC: 5 | RNVC: 2
993905-1: RNCC: 5 | RNVC: 2
B22-9001-001: RNCC: 5 | RNVC: 2
918337-51: RNCC: 5 | RNVC: 2
483679-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-188-0346
Turnbuckle

001880346
FFT791-TY1-FM1-CL7-1X12: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-179-9249
Rod End Clevis

001799249
NASM27120: RNCC: 3 | RNVC: 1
MS27120-5: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9
MS27120-5: RNCC: 5 | RNVC: 9

19 Dec 1971

5340-00-054-4927
Loop Clamp

000544927
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587C22: RNCC: 3 | RNVC: 2
AS5587C22: RNCC: 3 | RNVC: 9
AN742F22: RNCC: 5 | RNVC: 9

30 May 1967

5340-00-240-2307
Barrel Bolt

002402307
813200: RNCC: 3 | RNVC: 2
SP1078-US2C-2 1/2 IN: RNCC: 3 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH00111TYPEF1011C: RNCC: 5 | RNVC: 9
SP1078-US2C-2 1/2 IN: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-186-3409
Loop Clamp

001863409
AN742D23: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-193-2609
Loop Clamp

001932609
AN742D27: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-047-0221
Webbing Strap

010470221
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10D10: RNCC: 3 | RNVC: 2
NAS1213R10D9: RNCC: E | RNVC: 8

27 Aug 1977

5340-00-550-5943
Loop Clamp

005505943
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122916: RNCC: 3 | RNVC: 2
MS122916: RNCC: 5 | RNVC: 2
MS122916: RNCC: 5 | RNVC: 2
MS122916: RNCC: 5 | RNVC: 9
MS122916: RNCC: 5 | RNVC: 9
98-2017-1: RNCC: 7 | RNVC: 2

1 Jan 1963

5340-00-598-0234
Loop Clamp

005980234
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122910: RNCC: 3 | RNVC: 2
MS122910: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-800-4129
Angle Bracket

008004129
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743BZ12: RNCC: 3 | RNVC: 2
AN743BZ12: RNCC: 3 | RNVC: 9
AN743BZ12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-700-1423
Dust And Moisture Seal Protective Plug

007001423
6262328: RNCC: 3 | RNVC: 2
830161: RNCC: 5 | RNVC: 2
07-830161: RNCC: 5 | RNVC: 2
B262328: RNCC: 5 | RNVC: 2
3-6583: RNCC: 5 | RNVC: 2
7001423: RNCC: 5 | RNVC: 2
373196: RNCC: 5 | RNVC: 9
F6797: RNCC: 5 | RNVC: 9
22324H: RNCC: 5 | RNVC: 9
FC6797: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-965-6919
Webbing Strap

009656919
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R15J72: RNCC: 3 | RNVC: 2
NAS1213R15J58: RNCC: C | RNVC: 1
NAS1213R15J66: RNCC: C | RNVC: 1

1 Jan 1960

5340-00-963-9731
Electrical-Mechanical Equipment Post

009639731
8235-SS-0632-7: RNCC: 3 | RNVC: 2
2130-632-SS-20: RNCC: 5 | RNVC: 2
SS-3932-632-12: RNCC: 5 | RNVC: 2
76873-30: RNCC: 5 | RNVC: 2
1130H-SS-2.250-12: RNCC: 5 | RNVC: 2
SS6951-0632-2.250-01: RNCC: 5 | RNVC: 2
007260-6-36: RNCC: 5 | RNVC: 2
CP15-2-22C06-36: RNCC: 5 | RNVC: 2
ES-5225-12: RNCC: 5 | RNVC: 9
8235-SS-0632-7: RNCC: 5 | RNVC: 9

3 Jun 1966

5340-00-533-9206
Expansion Plug

005339206
SAE-AS9380: RNCC: 3 | RNVC: 1
MS9380-11: RNCC: 3 | RNVC: 2
MS9380-11: RNCC: 3 | RNVC: 9
370249: RNCC: 5 | RNVC: 2
MS9380-11: RNCC: 5 | RNVC: 9

14 Sep 1974

5340-00-763-0143
Loop Clamp

007630143
TA11C44D26T: RNCC: 3 | RNVC: 2
S280D26: RNCC: 5 | RNVC: 2
477-26: RNCC: 5 | RNVC: 2
JM44LC9D26T: RNCC: 5 | RNVC: 2
280D26: RNCC: 5 | RNVC: 9
5340PL0845500: RNCC: 6 | RNVC: 9
5340PL1971983: RNCC: 6 | RNVC: 9
C2874D26: RNCC: 7 | RNVC: 2

18 Apr 1972

5340-00-069-4931
Rod End Connector

000694931
MS21255-6RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
5340PL1510846: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-193-0112
Loop Clamp

001930112
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-20: RNCC: 3 | RNVC: 2
AN35-20: RNCC: 5 | RNVC: 9
AN735-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-0602
Rod End Connector

000690602
MS21254-5LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-069-0594
Rod End Connector

000690594
MS21254-2LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-192-9293
Loop Clamp

001929293
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-6: RNCC: 3 | RNVC: 2
AN735-6: RNCC: 3 | RNVC: 9
AN735-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-068-0548
Rod End Clevis

000680548
MS21252-6LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
941.93.26.113: RNCC: 5 | RNVC: 2
MS21252-6LL: RNCC: 5 | RNVC: 9
MS21252-6LL: RNCC: 5 | RNVC: 9
MS21252-6L: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-067-9871
Turnbuckle Body

000679871
MS21251-B2S: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-188-1500
Access Cover

001881500
BX238956: RNCC: 3 | RNVC: 2
5EX127: RNCC: 5 | RNVC: 2
1934221: RNCC: 5 | RNVC: 2
045521: RNCC: 5 | RNVC: 2
875285: RNCC: 5 | RNVC: 2
2378786: RNCC: 5 | RNVC: 2
208043R1: RNCC: 5 | RNVC: 9
5EX127: RNCC: 5 | RNVC: 9
2378786: RNCC: 5 | RNVC: 9
45521: RNCC: 5 | RNVC: 9

8 Sep 1972

5340-00-257-0038
Loop Clamp

002570038
SMB185786-1: RNCC: 3 | RNVC: 2
3038-9012PC2: RNCC: 3 | RNVC: 9
3038-9012PC2: RNCC: 5 | RNVC: 2
185786-1: RNCC: 5 | RNVC: 9
115-9-2: RNCC: 5 | RNVC: 9
54-4775-1: RNCC: 5 | RNVC: 9
57A5A182-1: RNCC: 5 | RNVC: 9
842967PC2: RNCC: 5 | RNVC: 9
E2: RNCC: 5 | RNVC: 9
2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-067-6322
Angle Bracket

000676322
MS9101-06: RNCC: 2 | RNVC: 2
MS9101: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-188-0336
Turnbuckle

001880336
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1G 5/8X12: RNCC: 3 | RNVC: 2
F1145-92: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0141
Loop Clamp

001930141
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-22: RNCC: 3 | RNVC: 2
AN735-22: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0122
Loop Clamp

001930122
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D35: RNCC: 3 | RNVC: 2
AN735D35: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-144-8317
Spring Tension Clip

001448317
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B038-05C: RNCC: 3 | RNVC: 2
6001-101CC: RNCC: 5 | RNVC: 9
NAS1464B038-050: RNCC: 5 | RNVC: 9

19 Jan 1973

5340-00-069-4929
Rod End Connector

000694929
MS21255-5RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-193-0147
Loop Clamp

001930147
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-30: RNCC: 3 | RNVC: 2
AN735: RNCC: 5 | RNVC: 1
AN735-30: RNCC: 5 | RNVC: 9
AN735-30: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-188-0285
Turnbuckle

001880285
FFT791-TY1-FM1-CL5-1/2X12: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1
FFT791ATYPE1F0RM1CLASS5: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-270-8532
Plug Button

002708532
NAS451: RNCC: 3 | RNVC: 1
NAS-451-55: RNCC: 3 | RNVC: 2
NAS451-55: RNCC: 3 | RNVC: 2
83708: RNCC: 5 | RNVC: 9
83708: RNCC: 5 | RNVC: 9
83708: RNCC: 5 | RNVC: 9
48132: RNCC: 5 | RNVC: 9
451-55: RNCC: 5 | RNVC: 9
83708: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-188-0337
Turnbuckle

001880337
FFT791-TY1-FM1-CL7-5/8X18: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-621-8318
Rod End Locking Retainer

006218318
NAS559: RNCC: 3 | RNVC: 1
NAS559-4: RNCC: 3 | RNVC: 2
5342PL0835493: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-922-6302
Loop Clamp

009226302
NASM21333: RNCC: 3 | RNVC: 1
MS21333-81: RNCC: 3 | RNVC: 2
1102114: RNCC: 5 | RNVC: 2
15016397: RNCC: 5 | RNVC: 2
MS21333-81: RNCC: 5 | RNVC: 9
5340009226302: RNCC: 5 | RNVC: 9

10 Jan 1966

5340-00-536-7286
Bow Handle

005367286
9M215C0800: RNCC: 3 | RNVC: 2
9M215C0800: RNCC: 3 | RNVC: 2
9M215C0800: RNCC: 3 | RNVC: 2
9M215C0800: RNCC: 3 | RNVC: 2
8112-8000-1032SS12: RNCC: 3 | RNVC: 2
S 1018: RNCC: 3 | RNVC: 2
9M215C0800: RNCC: 3 | RNVC: 2
8112-8.000-1032 SS 12: RNCC: 5 | RNVC: 2
9M215C0800: RNCC: 5 | RNVC: 2
AL-3071-1032-00: RNCC: 5 | RNVC: 2

22 Sep 1974

5340-01-051-2311
Clip

010512311
3S8664: RNCC: 3 | RNVC: 2
3S-8664: RNCC: 5 | RNVC: 2

25 Nov 1977

5340-00-687-3222
Plug Button

006873222
NAS451: RNCC: 3 | RNVC: 1
NAS451-26: RNCC: 3 | RNVC: 2
NAS-451-26: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-619-7126
Mounting Plate

006197126
7571921P1: RNCC: 3 | RNVC: 2
A630A01: RNCC: 5 | RNVC: 2
TC828-TB: RNCC: 5 | RNVC: 2
0140150G00: RNCC: 5 | RNVC: 2
TA1S8-M: RNCC: 5 | RNVC: 2
TC828: RNCC: 5 | RNVC: 9
TC828: RNCC: 5 | RNVC: 9
TC828: RNCC: 5 | RNVC: 9
ES3349-09: RNCC: 5 | RNVC: 9
TC828: RNCC: 7 | RNVC: 2

28 Jun 1971

5340-00-807-1070
Butt Hinge Leaf

008071070
MS20001PH9-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PH9-7200: RNCC: 5 | RNVC: 1
MS20001PH9-0138: RNCC: 5 | RNVC: 9
K635002-77: RNCC: C | RNVC: 1
MS20001PY9-7200: RNCC: E | RNVC: 8
MS20001PY9-7200: RNCC: E | RNVC: 8

1 Jan 1962

5340-01-018-8985
Loop Clamp

010188985
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7K: RNCC: 3 | RNVC: 2

1 Apr 1976

5340-00-000-0059
Door Closer

000000059
BHMA-A156.4: RNCC: 3 | RNVC: 1
BHMA-A156.4 C02012 SIZE 4: RNCC: 3 | RNVC: 2
A156.4 TYPE C02012 SIZE 4: RNCC: 5 | RNVC: 9
FF-H-121: RNCC: 5 | RNVC: 9
A-A-1926: RNCC: 5 | RNVC: 9

11 Nov 1975

5340-00-152-0575
Mending Plate

001520575
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-006: RNCC: 3 | RNVC: 2
AS9552: RNCC: 5 | RNVC: 1
MS9552-006: RNCC: 5 | RNVC: 2
MS9552-006: RNCC: 5 | RNVC: 9
AS9552: RNCC: 5 | RNVC: 9

21 Jan 1973

5340-00-282-7505
Loop Clamp

002827505
NASM21333: RNCC: 3 | RNVC: 1
MS21333-57: RNCC: 3 | RNVC: 2
CMDX2PT140580: RNCC: 5 | RNVC: 1
5340002827505: RNCC: 5 | RNVC: 9
MS21333-57: RNCC: 5 | RNVC: 9
5340002827505: RNCC: 6 | RNVC: 9
7B9919: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-151-5997
Loop Clamp

001515997
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D4KWX: RNCC: 3 | RNVC: 2
NAS1715D4KWD: RNCC: 3 | RNVC: 9
EAB700D4: RNCC: 5 | RNVC: 1
MS21104D4: RNCC: 5 | RNVC: 9
MS21122W-4: RNCC: 5 | RNVC: 9
MS21122-4: RNCC: 5 | RNVC: 9
5340PL0726913: RNCC: 6 | RNVC: 9
5340PL1747879: RNCC: 6 | RNVC: 9
504075: RNCC: C | RNVC: 1

3 Feb 1971

5340-00-074-3983
Angle Bracket

000743983
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743B7: RNCC: 3 | RNVC: 2
AN743B7: RNCC: 3 | RNVC: 9
AN743B7: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-279-9043
Angle Bracket

002799043
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-367: RNCC: 3 | RNVC: 2
MS9601-367: RNCC: 5 | RNVC: 9

15 Aug 1973

5340-00-151-6006
Loop Clamp

001516006
MS21122-30: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

29 Mar 1971

5340-00-080-0712
Angle Bracket

000800712
SAE-AS9228: RNCC: 3 | RNVC: 1
MS9228-01: RNCC: 3 | RNVC: 2
MS9228-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-281-6243
Mending Plate

002816243
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-016: RNCC: 3 | RNVC: 2
MS9552-016: RNCC: 5 | RNVC: 9
MS9552-016: RNCC: 5 | RNVC: 9

26 Aug 1973

5340-00-151-6000
Loop Clamp

001516000
NAS1715: RNCC: 3 | RNVC: 1
LS7357DT10: RNCC: 3 | RNVC: 2
NAS1715D10KWX: RNCC: 3 | RNVC: 2
TA4C76WD10X: RNCC: 3 | RNVC: 2
S281-10: RNCC: 5 | RNVC: 2
JM43LC14WD10X: RNCC: 5 | RNVC: 2
385-10: RNCC: 5 | RNVC: 2
C2037-10: RNCC: 5 | RNVC: 2
TA04C76WD10X: RNCC: 5 | RNVC: 2
MS21122-10: RNCC: 5 | RNVC: 9

3 Feb 1971

5340-00-279-9225
Loop Clamp

002799225
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C12N: RNCC: 3 | RNVC: 2

25 Aug 1973

5340-00-200-7451
Loop Clamp

002007451
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG17: RNCC: 3 | RNVC: 2
AS21919WDG17: RNCC: 3 | RNVC: 9
28222741: RNCC: 5 | RNVC: 2
4116200-129: RNCC: 5 | RNVC: 2
C8603TYPE4ANDCLASSA: RNCC: 5 | RNVC: 9
28222741: RNCC: 5 | RNVC: 9
MS21919WDG17: RNCC: 5 | RNVC: 9
10082428: RNCC: 6 | RNVC: 9
5340PL1744996: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-053-7129
Butt Hinge

010537129
AA55591-5C: RNCC: 2 | RNVC: 2
A-A-55591: RNCC: 4 | RNVC: 1
MS35823-5C: RNCC: 5 | RNVC: 9
MS35823-5C: RNCC: 5 | RNVC: 9

9 Jan 1978

5340-01-022-8584
Snap Hook

010228584
NASM43770/1: RNCC: 3 | RNVC: 1
M43770/1-CWBC2: RNCC: 3 | RNVC: 2
NASM43770/1-CWBC2: RNCC: 5 | RNVC: 9

7 Jun 1976

5340-00-981-6705
Catch Strike

009816705
250811: RNCC: 1 | RNVC: 2
1039228: RNCC: 3 | RNVC: 2
B5-19-8864: RNCC: 3 | RNVC: 2
9225088: RNCC: 3 | RNVC: 2
51L7-1AA: RNCC: 5 | RNVC: 2
FV654795-7: RNCC: 5 | RNVC: 2
8851299: RNCC: 5 | RNVC: 2
577R035H01: RNCC: 5 | RNVC: 2
D2652PGT200-1B: RNCC: 5 | RNVC: 2
D2652PGT200-1A: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-00-228-2852
Quick Release Plunger

002282852
SSBL60N: RNCC: 3 | RNVC: 2
W-8N: RNCC: 5 | RNVC: 2
10807-1: RNCC: 7 | RNVC: 9
10807-1: RNCC: C | RNVC: 1
349AS112-2: RNCC: C | RNVC: 1
CL70BP1CP: RNCC: C | RNVC: 1

5 Feb 1969

5340-00-088-6655
Loop Clamp

000886655
NASM21333: RNCC: 3 | RNVC: 1
MS21333-101: RNCC: 3 | RNVC: 2
CMDX2-3PT573039: RNCC: 5 | RNVC: 2
CAU24527: RNCC: 5 | RNVC: 2
MS21333-101: RNCC: 5 | RNVC: 9
5340000886655: RNCC: 5 | RNVC: 9
10387842: RNCC: 6 | RNVC: 9
5340000886655: RNCC: 6 | RNVC: 9
5342PL0734336: RNCC: 6 | RNVC: 9
CAU24527: RNCC: 7 | RNVC: 2

1 Jan 1963

5340-01-024-3769
Loop Clamp

010243769
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C10S: RNCC: 3 | RNVC: 2

9 Jul 1976

5340-01-054-6092
Butt Hinge

010546092
AA55593-10C: RNCC: 2 | RNVC: 2
A-A-55593: RNCC: 4 | RNVC: 1
MS35826-10C: RNCC: 5 | RNVC: 9
MS35826-2C: RNCC: 5 | RNVC: 9
MS35826-10C: RNCC: 5 | RNVC: 9

22 Jan 1978

5340-00-159-2536
Angle Bracket

001592536
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-100: RNCC: 3 | RNVC: 2
MS9593-100: RNCC: 3 | RNVC: 9
MS9593-100: RNCC: 5 | RNVC: 9

29 Oct 1971

5340-01-014-5422
Spring Tension Clip

010145422
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-213: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2/213: RNCC: 5 | RNVC: 9

24 Dec 1975

5340-01-165-4707
Mending Plate

011654707
453 6517-001: RNCC: 3 | RNVC: 9
453 6517-001: RNCC: 5 | RNVC: 2
4536517-001: RNCC: 5 | RNVC: 2
011544: RNCC: 5 | RNVC: 2
HE011544: RNCC: 5 | RNVC: 2
92683-991: RNCC: 5 | RNVC: 9
4536517-001: RNCC: 5 | RNVC: 9
4536517-001: RNCC: 5 | RNVC: 9
474-3722: RNCC: 6 | RNVC: 9

29 Oct 1983

5340-01-145-5548
Loop Clamp

011455548
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCH08: RNCC: 3 | RNVC: 2
AS21919WCH8: RNCC: 3 | RNVC: 2
AS21919: RNCC: 5 | RNVC: 1
3177T72: RNCC: 5 | RNVC: 2
MS21919WCH8: RNCC: 5 | RNVC: 2
MS21919WCH8: RNCC: 5 | RNVC: 2
MS21919WCH8: RNCC: 5 | RNVC: 2
AS21919WCH08: RNCC: 5 | RNVC: 2
AS21919WCH8: RNCC: 5 | RNVC: 9

14 Jan 1983

5340-01-123-1554
Loop Clamp

011231554
M85052/1-14: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
SS7563-14NBC: RNCC: 5 | RNVC: 1
1444PHW14Y: RNCC: 5 | RNVC: 1
058527-06: RNCC: 5 | RNVC: 1
9M972-14N: RNCC: 5 | RNVC: 1
JM44LC70WPH14YN: RNCC: 5 | RNVC: 1
TA026000114NB: RNCC: 5 | RNVC: 1
S664NB14: RNCC: 5 | RNVC: 1
9M972-14N: RNCC: 5 | RNVC: 1

6 Dec 1981

5340-01-089-4024
Loop Clamp

010894024
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-16N: RNCC: 3 | RNVC: 2
10117611: RNCC: 6 | RNVC: 9

31 Jan 1980

5340-01-096-2880
Loop Clamp

010962880
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7KW: RNCC: 3 | RNVC: 2
MS21122C7: RNCC: 5 | RNVC: 9
10388226: RNCC: 6 | RNVC: 9
MS21122-C7: RNCC: C | RNVC: 1

17 Jun 1980

5340-01-085-1925
Loop Clamp

010851925
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D7KW: RNCC: 3 | RNVC: 2

1 Nov 1979

5340-01-083-9000
Loop Clamp

010839000
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D16K: RNCC: 3 | RNVC: 2

3 Oct 1979

5340-01-081-3420
Loop Clamp

010813420
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-8N: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-01-076-3532
Loop Clamp

010763532
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C8-16S: RNCC: 3 | RNVC: 2

4 May 1979

5340-01-073-5434
Dust And Moisture Seal Protective Plug

010735434
NAS847: RNCC: 3 | RNVC: 1
NAS845-7: RNCC: 3 | RNVC: 2
NAS845-7: RNCC: 5 | RNVC: 2
M5501/10-F9: RNCC: 5 | RNVC: 9
MIL-C-5501: RNCC: 5 | RNVC: 9
10117589: RNCC: 6 | RNVC: 9
5340PL0169460: RNCC: 6 | RNVC: 9

16 Mar 1979

5340-01-069-1794
Loop Clamp

010691794
MS21122-W3: RNCC: 2 | RNVC: 2
MS21122W-3: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MS21122W-3: RNCC: 5 | RNVC: 2
5340PL0847214: RNCC: 6 | RNVC: 9

9 Dec 1978

5340-01-066-5075
Loop Clamp

010665075
MS21919WG4: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MS21919WG4: RNCC: 5 | RNVC: 1
TA1716WS4: RNCC: 5 | RNVC: 2
TA1716WS4CR: RNCC: 5 | RNVC: 2
302867: RNCC: 5 | RNVC: 2
SAE-AS21919: RNCC: 5 | RNVC: 9
MS21919WG4: RNCC: 5 | RNVC: 9
MS21919WBG4: RNCC: 5 | RNVC: 9
5340010665075: RNCC: 5 | RNVC: 9

12 Oct 1978

5340-01-062-9801
Angle Bracket

010629801
SAE AS9593C: RNCC: 3 | RNVC: 1
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-012: RNCC: 3 | RNVC: 2
MS9593-012: RNCC: 3 | RNVC: 9
MS9593-012: RNCC: 5 | RNVC: 9
MS9593-011: RNCC: C | RNVC: 1
MS9593-011: RNCC: E | RNVC: 8

24 Jul 1978

5340-01-121-0484
Loop Clamp

011210484
M85052/3-18: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000118HC: RNCC: 5 | RNVC: 1
9M972-18S: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112411: RNCC: 6 | RNVC: 9

29 Oct 1981

5340-01-113-0878
Dust And Moisture Seal Protective Cap-Plug

011130878
NAS834: RNCC: 3 | RNVC: 1
NAS834-11: RNCC: 3 | RNVC: 2
M5501/7-F1: RNCC: 5 | RNVC: 9
MIL-C-5501/7: RNCC: 5 | RNVC: 9
PT00: RNCC: 5 | RNVC: 9
MILC52078: RNCC: 5 | RNVC: 9
592-6383534 FIND 11: RNCC: C | RNVC: 1

15 May 1981

5340-01-112-3532
Loop Clamp

011123532
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF26: RNCC: 3 | RNVC: 2
S663WDG26: RNCC: 3 | RNVC: 2
JM44LC28WD26: RNCC: 3 | RNVC: 2
90601604: RNCC: 5 | RNVC: 2
MS21919WDF26: RNCC: 5 | RNVC: 9
AS21919WDF26: RNCC: 5 | RNVC: 9
815WD26: RNCC: 5 | RNVC: 9
815WD26NB: RNCC: 5 | RNVC: 9
ST9M588WDF26: RNCC: 5 | RNVC: 9

1 May 1981

5340-01-102-2351
Loop Clamp

011022351
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D11KW: RNCC: 3 | RNVC: 2

16 Oct 1980

5340-01-105-9143
Loop Clamp

011059143
NASM21334: RNCC: 3 | RNVC: 1
MS21334-42: RNCC: 3 | RNVC: 2
MS21334-42: RNCC: 5 | RNVC: 9

7 Jan 1981

5340-01-061-1782
Loop Clamp

010611782
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D12KW: RNCC: 3 | RNVC: 2

13 Jun 1978

5340-00-570-3786
Sealing Plug Assembly

005703786
093-49831-004: RNCC: 3 | RNVC: 2
PLGA1250010A: RNCC: 3 | RNVC: 2
PLGA1250010: RNCC: 5 | RNVC: 2
PLGA1250010: RNCC: 5 | RNVC: 2
PLGA1250010A: RNCC: 5 | RNVC: 9
125001: RNCC: 5 | RNVC: 9
PLGA1250010AD: RNCC: 5 | RNVC: 9
125001: RNCC: 5 | RNVC: 9
ES167A125S: RNCC: 5 | RNVC: 9
1223-802: RNCC: 5 | RNVC: 9

1 Dec 1974

5340-00-530-7989
Threaded Rod End

005307989
AN490HT15P: RNCC: 3 | RNVC: 2
MIL-DTL-45918: RNCC: 4 | RNVC: 1
AN490HT15P: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-530-5353
Rod End Clevis

005305353
AN665-21R: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1
941.93.28.104: RNCC: 5 | RNVC: 2
807139-00: RNCC: 5 | RNVC: 9
AN665C21R: RNCC: 5 | RNVC: 9
488 327: RNCC: 5 | RNVC: 9
126898B: RNCC: 5 | RNVC: 9
126898B: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-559-8846
Loop Clamp

005598846
10031-10: RNCC: 3 | RNVC: 2
4049950801: RNCC: 3 | RNVC: 2
150-1552-000: RNCC: 3 | RNVC: 2
54967-11: RNCC: 3 | RNVC: 2
8177336: RNCC: 3 | RNVC: 2
HP-11N: RNCC: 5 | RNVC: 2
85Z9D12: RNCC: 5 | RNVC: 2
1208531-11: RNCC: 5 | RNVC: 9
150-1552-00: RNCC: 5 | RNVC: 9
10031-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-528-4882
Angle Bracket

005284882
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-012: RNCC: 3 | RNVC: 2
9682013431: RNCC: 5 | RNVC: 2
MS9592-012: RNCC: 5 | RNVC: 9
5340PL1559970: RNCC: 6 | RNVC: 9
10117390: RNCC: 6 | RNVC: 9

1 Sep 1974

5340-00-559-7543
Expansion Plug

005597543
MS35648-7: RNCC: 2 | RNVC: 2
MIL-P-20691: RNCC: 4 | RNVC: 1
0910004: RNCC: 5 | RNVC: 1
910004: RNCC: 5 | RNVC: 1
517-17: RNCC: 5 | RNVC: 1
0910004-1: RNCC: 5 | RNVC: 1
172545: RNCC: 5 | RNVC: 1
172545: RNCC: 5 | RNVC: 9
5340005597543: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-558-6031
Loop Clamp

005586031
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C17N: RNCC: 3 | RNVC: 2
MS9024-16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-526-2381
Loop Clamp

005262381
MS21103D5: RNCC: 2 | RNVC: 2
MS21103: RNCC: 4 | RNVC: 1
AN742D5: RNCC: 5 | RNVC: 2
6026-1001-12: RNCC: 5 | RNVC: 9
6026-1551-44: RNCC: 5 | RNVC: 9
5340PL0733083: RNCC: 6 | RNVC: 9
5340PL1733447: RNCC: 6 | RNVC: 9
10117389: RNCC: 6 | RNVC: 9

28 Aug 1974

5340-00-500-1549
Loop Clamp

005001549
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT3K: RNCC: 3 | RNVC: 2

6 Jul 1974

5340-00-498-7007
Spring Tension Clip

004987007
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-068-04C: RNCC: 3 | RNVC: 2

17 Oct 1969

5340-00-493-6801
Loop Clamp

004936801
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K11N: RNCC: 3 | RNVC: 2

15 Oct 1972

5340-00-477-8878
Retaining Strap

004778878
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16W47N: RNCC: 3 | RNVC: 2

18 May 1970

5340-00-446-9296
Retaining Strap

004469296
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D24W52N: RNCC: 3 | RNVC: 2

8 Jan 1971

5340-00-821-3594
Loop Clamp

008213594
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R30: RNCC: 3 | RNVC: 2
MS25281R30: RNCC: 5 | RNVC: 9
10117468: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-598-8262
Angle Bracket

005988262
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743-8: RNCC: 3 | RNVC: 2
AN743-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-775-5266
Loop Clamp

007755266
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C13KH: RNCC: 3 | RNVC: 2
MS9350-12: RNCC: 5 | RNVC: 9

25 Mar 1968

5340-00-725-6033
Spring Tension Clip

007256033
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-321: RNCC: 3 | RNVC: 2
336253-21: RNCC: 5 | RNVC: 2
100-200-6-3: RNCC: 5 | RNVC: 2
13788-1: RNCC: 5 | RNVC: 2
640000P8: RNCC: 5 | RNVC: 2
18-00119-021: RNCC: 5 | RNVC: 2
8185846: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
12-335-00-252: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-597-4483
Dust And Moisture Seal Protective Cap

005974483
AN5012-60: RNCC: 2 | RNVC: 2
AN5012: RNCC: 4 | RNVC: 1
91750: RNCC: 5 | RNVC: 1
MS27417-60: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-433-3722
Angle Bracket

004333722
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-214: RNCC: 3 | RNVC: 2
9682013409: RNCC: 5 | RNVC: 2
MS9592-214: RNCC: 5 | RNVC: 9
968.20.13.409: RNCC: 5 | RNVC: 9
5342PL0212524: RNCC: 6 | RNVC: 9
10117359: RNCC: 6 | RNVC: 9

17 Aug 1970

5340-00-410-2983
Angle Bracket

004102983
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-134: RNCC: 3 | RNVC: 2
MS9592-134: RNCC: 3 | RNVC: 9
MS9592-134: RNCC: 5 | RNVC: 9
5340PL1674478: RNCC: 6 | RNVC: 9

15 Aug 1969

5340-00-402-0509
Angle Bracket

004020509
SAE-AS9602: RNCC: 3 | RNVC: 1
MS9602-250: RNCC: 3 | RNVC: 2
MS9602-250: RNCC: 5 | RNVC: 9

10 Apr 1970

5340-00-404-4098
Loop Clamp

004044098
COV-1713: RNCC: 3 | RNVC: 2
TA720516: RNCC: 3 | RNVC: 2
12419079-012: RNCC: 3 | RNVC: 2
S524: RNCC: 5 | RNVC: 2
12419079-012: RNCC: 5 | RNVC: 2
12419079-012: RNCC: 5 | RNVC: 2
12419079-012: RNCC: 5 | RNVC: 2
12419079-012: RNCC: 5 | RNVC: 9
S468H16: RNCC: 5 | RNVC: 9
2287HX: RNCC: 5 | RNVC: 9

8 Aug 1969

5340-00-339-2421
Helical Compression Spring Seat

003392421
425166: RNCC: 3 | RNVC: 2
N425166: RNCC: 5 | RNVC: 2
DE256S4501-36PC7: RNCC: 5 | RNVC: 9
DE256S4501-38PC7: RNCC: 5 | RNVC: 9
E1831PC7: RNCC: 5 | RNVC: 9
E1868PC7: RNCC: 5 | RNVC: 9
AS15S4200-136PC7: RNCC: 5 | RNVC: 9
AS15S4200-138PC7: RNCC: 5 | RNVC: 9
DE256S5501-38PC7: RNCC: 5 | RNVC: 9
DE99S4501-36PC7: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-331-1660
Bumper

003311660
354998-2: RNCC: 3 | RNVC: 2
160713: RNCC: 3 | RNVC: 2
11A2004: RNCC: 3 | RNVC: 2
8176877: RNCC: 3 | RNVC: 2
698: RNCC: 5 | RNVC: 2
354998-2: RNCC: 5 | RNVC: 2
992463-01: RNCC: 5 | RNVC: 2
K7117972P1: RNCC: 5 | RNVC: 9
354998-2: RNCC: 5 | RNVC: 9
5337-230: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-337-8642
Loop Clamp

003378642
CH8M: RNCC: 3 | RNVC: 2
10607442-1: RNCC: 5 | RNVC: 2
9147C5001-8: RNCC: 5 | RNVC: 2
900129-08: RNCC: 5 | RNVC: 2
8811154-37: RNCC: 5 | RNVC: 2
10607442-1: RNCC: 5 | RNVC: 2
10607442-1: RNCC: 5 | RNVC: 2
990117-9: RNCC: 5 | RNVC: 2
900129-08: RNCC: 5 | RNVC: 9
8811154-37: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-323-1540
Loop Clamp

003231540
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-32N: RNCC: 3 | RNVC: 2
10117333: RNCC: 6 | RNVC: 9

24 Nov 1973

5340-00-300-1976
Spring Tension Clip

003001976
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-083-06C: RNCC: 3 | RNVC: 2

6 Oct 1973

5340-00-291-4208
Padlock Set

002914208
AA59486-1IB70S: RNCC: 2 | RNVC: 2
AA594861IB70S: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
MS21313-117: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-323-5690
Electrical-Mechanical Equipment Post

013235690
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C44: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-01-151-5151
Mending Plate

011515151
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-011: RNCC: 3 | RNVC: 2
AS9552: RNCC: 5 | RNVC: 9
AS9552: RNCC: 5 | RNVC: 9
MS9552-011: RNCC: 5 | RNVC: 9
MS9552-011: RNCC: 5 | RNVC: 9

18 Apr 1983

5340-01-169-5609
Angle Bracket

011695609
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-053: RNCC: 3 | RNVC: 2
MS9592-053: RNCC: 5 | RNVC: 9

11 Jan 1984

5340-01-185-4958
Plug Button

011854958
2663: RNCC: 3 | RNVC: 2
ST9M621-625: RNCC: 3 | RNVC: 2
59283AX: RNCC: 5 | RNVC: 2
0009.9200.00: RNCC: 5 | RNVC: 2
2663: RNCC: 5 | RNVC: 2
102-3953: RNCC: 5 | RNVC: 2
999/4/35300/003: RNCC: 5 | RNVC: 2
STD824-4: RNCC: 5 | RNVC: 2
59283AX: RNCC: 5 | RNVC: 9
Z00.N7088595063: RNCC: 5 | RNVC: 9

29 Jul 1984

5340-01-197-6727
Grooved Clamp Coupling

011976727
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-01B: RNCC: 3 | RNVC: 2
AS5355/1-01B: RNCC: 3 | RNVC: 9
AS5355: RNCC: 5 | RNVC: 1
AS5355: RNCC: 5 | RNVC: 9
MS27114-01B: RNCC: 5 | RNVC: 9
AS535511-01B: RNCC: 5 | RNVC: 9

24 Dec 1984

5340-01-139-2091
Angle Bracket

011392091
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-176: RNCC: 3 | RNVC: 2
MS9592-176: RNCC: 5 | RNVC: 9

27 Sep 1982

5340-01-158-6584
Loop Clamp

011586584
MS21919WCH13: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
MS21919WDH13: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-01-157-5860
Loop Clamp

011575860
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-36N: RNCC: 3 | RNVC: 2
10112813: RNCC: 6 | RNVC: 9

8 Jul 1983

5340-01-157-3504
Loop Clamp

011573504
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D14SW: RNCC: 3 | RNVC: 2

4 Jul 1983

5340-01-147-2830
Access Cover

011472830
74A321651-2013: RNCC: 3 | RNVC: 2
74A321651-2013: RNCC: 5 | RNVC: 2
74A321651-1005: RNCC: E | RNVC: 8

15 Feb 1983

5340-01-127-3925
Loop Clamp

011273925
M85052/3-23: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112518: RNCC: 6 | RNVC: 9

27 Feb 1982

5340-01-135-9622
Webbing Strap

011359622
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10JK30: RNCC: 3 | RNVC: 2

31 Jul 1982

5340-01-126-9813
Loop Clamp

011269813
M85052/3-24: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000124HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10319842: RNCC: 6 | RNVC: 9

21 Feb 1982

5340-00-988-4505
Spring Tension Clip

009884505
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-062-04C: RNCC: 3 | RNVC: 2
NAS1464-062-040: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-987-8822
Rod End Locking Retainer

009878822
NAS1193: RNCC: 3 | RNVC: 1
NAS1193-12C: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-934-9786
Loop Clamp

009349786
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281F16: RNCC: 3 | RNVC: 2
MS25281-F16: RNCC: 3 | RNVC: 2
MS25281F16: RNCC: 3 | RNVC: 9
946281-3016: RNCC: 5 | RNVC: 2
SYMZ-70276 ITEM 3: RNCC: 5 | RNVC: 2
300513-834: RNCC: 5 | RNVC: 9
SAE-AS25281: RNCC: 5 | RNVC: 9
MS25281F16: RNCC: 5 | RNVC: 9
10301187: RNCC: 6 | RNVC: 9

3 Mar 1967

5340-00-781-3915
Snap Hook

007813915
NAS1282: RNCC: 3 | RNVC: 1
NAS1282B12: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-826-3969
Loop Clamp

008263969
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDF18: RNCC: 3 | RNVC: 2
AS21919WDF18: RNCC: 3 | RNVC: 9
S663WDF18: RNCC: 5 | RNVC: 2
JM44LC28WD18YN: RNCC: 5 | RNVC: 2
TA1716WD18AF: RNCC: 5 | RNVC: 2
ST9M588WDF18: RNCC: 5 | RNVC: 2
MS21104WD-18: RNCC: 5 | RNVC: 9
MS21104WDX-18: RNCC: 5 | RNVC: 9
815WD18NB: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-931-7241
Spring Tension Clip

009317241
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B030-08C: RNCC: 3 | RNVC: 2

21 Sep 1966

5340-00-726-2214
Dust And Moisture Seal Protective Cap-Plug

007262214
NAS834: RNCC: 3 | RNVC: 1
NAS834-69: RNCC: 3 | RNVC: 2
218MR012P015: RNCC: 5 | RNVC: 1
28901-14: RNCC: 5 | RNVC: 1
9: RNCC: 5 | RNVC: 1
8028435: RNCC: 5 | RNVC: 1
28901-14: RNCC: 5 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
9: RNCC: 5 | RNVC: 9
M5501/7-F16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-598-8250
Angle Bracket

005988250
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743-7: RNCC: 3 | RNVC: 2
AN743-7: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-839-7172
Spring Tension Clip

008397172
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-074-10C: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-702-2848
Loop Clamp

007022848
NASM21333: RNCC: 3 | RNVC: 1
MS21333-128: RNCC: 3 | RNVC: 2
MS21333-128: RNCC: 5 | RNVC: 9
5340007022848: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-839-3749
Butt Hinge

008393749
MS20257C5-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
MS20257C5-7200: RNCC: 5 | RNVC: 1
130445: RNCC: 5 | RNVC: 1
MS20257C5300: RNCC: 5 | RNVC: 9
MS20257C5-17.5: RNCC: 5 | RNVC: 9
MS20257C5-3500: RNCC: 5 | RNVC: 9
MS20257-C5: RNCC: 5 | RNVC: 9
MS20257C5-200: RNCC: 5 | RNVC: 9
2662: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-882-2226
Clamp Bolt Assembly

008822226
NAS573: RNCC: 3 | RNVC: 1
NAS573-11: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-990-3174
Angle Bracket

009903174
SAE-AS9228: RNCC: 3 | RNVC: 1
MS9228-13: RNCC: 3 | RNVC: 2
MS9228-13: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-942-2209
Arched Cushion

009422209
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-11: RNCC: 3 | RNVC: 2
MS9393-11: RNCC: 5 | RNVC: 9

11 Dec 1965

5340-00-941-3523
Angle Bracket

009413523
MS9101-23: RNCC: 2 | RNVC: 2
MS9101: RNCC: 4 | RNVC: 1

17 Dec 1965

5340-00-838-8373
Loop Clamp

008388373
JM44LC13WS2R: RNCC: 3 | RNVC: 2
509S2: RNCC: 3 | RNVC: 2
TA12C32WS2: RNCC: 3 | RNVC: 2
BACC10GE2: RNCC: 5 | RNVC: 2
BACC10GE2: RNCC: 5 | RNVC: 2
BACC10BH2RW: RNCC: 5 | RNVC: 2
TA4C81WS2: RNCC: 5 | RNVC: 2
400WCS2: RNCC: 5 | RNVC: 2
S369WH-2: RNCC: 5 | RNVC: 9
S714WH-2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-804-1248
Dust And Moisture Seal Protective Plug

008041248
NAS836: RNCC: 3 | RNVC: 1
NAS836-20A: RNCC: 3 | RNVC: 2
M5501/1-20: RNCC: 5 | RNVC: 9
MILC5501TYPE3CLASSASIZE20: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-804-1240
Dust And Moisture Seal Protective Plug

008041240
NAS847: RNCC: 3 | RNVC: 1
NAS842-3A: RNCC: 3 | RNVC: 2
M5501/2-3: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE3: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-189-6712
Electrical-Mechanical Equipment Post

011896712
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4B14: RNCC: 3 | RNVC: 2

18 Sep 1984

5340-01-196-3410
Loop Clamp

011963410
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C7-13S: RNCC: 3 | RNVC: 2

11 Dec 1984

5340-01-160-6617
Rim Latch

011606617
2896556-2: RNCC: 3 | RNVC: 2
9149-2: RNCC: 5 | RNVC: 2
2896556-2: RNCC: 5 | RNVC: 2
2996-2: RNCC: 5 | RNVC: 2
ABC-6139-101: RNCC: 5 | RNVC: 2
A2212-2: RNCC: 5 | RNVC: 2
2896556-2: RNCC: 5 | RNVC: 2
ABC-6139-101: RNCC: 5 | RNVC: 2
2896556-2: RNCC: 5 | RNVC: 9
5340PL1656221: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-01-190-0407
Loop Clamp

011900407
MS9025-21: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1
959E461-020: RNCC: 5 | RNVC: 1
1102G36-021: RNCC: 5 | RNVC: 9
959E461-020: RNCC: 5 | RNVC: 9
1102G36-021: RNCC: 5 | RNVC: 9

23 Sep 1984

5340-00-766-1152
Retaining Strap

007661152
NASM21314: RNCC: 3 | RNVC: 1
MS21314-19: RNCC: 3 | RNVC: 2
FFS760TYPE2STYLEA: RNCC: 5 | RNVC: 9
MS21314-19: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-902-1098
Loop Clamp

009021098
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P9B: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-685-0567
Loop Clamp

006850567
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C19N: RNCC: 3 | RNVC: 2
MS9024-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-958-3172
Spring Tension Clip

009583172
NASM24066/2: RNCC: 3 | RNVC: 1
540006-261: RNCC: 3 | RNVC: 2
100-200-12-22: RNCC: 3 | RNVC: 2
336253-31: RNCC: 5 | RNVC: 2
38699-2: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066&2&131: RNCC: 5 | RNVC: 9
1018990-031: RNCC: 5 | RNVC: 9
6018-97A: RNCC: 5 | RNVC: 9
10117514: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-004-0736
Loop Clamp

010040736
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D11-27N: RNCC: 3 | RNVC: 2

16 May 1975

5340-00-949-1858
Clamp Assembl * Hinge

009491858
NAS573: RNCC: 3 | RNVC: 1
NAS573-9: RNCC: 3 | RNVC: 2
2501703-9: RNCC: 5 | RNVC: 9
127-0032-009: RNCC: 5 | RNVC: 9

11 Apr 1966

5340-00-807-4335
Angle Bracket

008074335
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743C-13: RNCC: 3 | RNVC: 2
738461-1: RNCC: 5 | RNVC: 2
AN743C13: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-949-1895
Spring Tension Clip

009491895
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-038-08C: RNCC: 3 | RNVC: 2

13 Apr 1966

5340-00-682-2119
Dust And Moisture Seal Protective Cap

006822119
M550I/3-16: RNCC: 2 | RNVC: 2
MIL-C-5501/3: RNCC: 4 | RNVC: 1
RB15256-10: RNCC: 5 | RNVC: 1
6-16: RNCC: 5 | RNVC: 1
SC16: RNCC: 5 | RNVC: 1
118170: RNCC: 5 | RNVC: 1
NAS817-16: RNCC: 5 | RNVC: 1
MILC5501TYPE2CLASSASIZE16: RNCC: 5 | RNVC: 9
C16: RNCC: 5 | RNVC: 9
118170: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-889-8677
Dust And Moisture Seal Protective Cap

008898677
SAE-AS85049/138: RNCC: 3 | RNVC: 1
M85049/138-50A: RNCC: 3 | RNVC: 2
M85049/138-50A: RNCC: 3 | RNVC: 9
EC-24: RNCC: 5 | RNVC: 1
NAS813-24: RNCC: 5 | RNVC: 1
EC-24: RNCC: 5 | RNVC: 1
NAS813-24: RNCC: 5 | RNVC: 1
70211: RNCC: 5 | RNVC: 2
91920885: RNCC: 5 | RNVC: 2
M85049/138-50A: RNCC: 5 | RNVC: 2

10 Apr 1968

5340-00-637-1886
Loop Clamp

006371886
SAE-AS1553: RNCC: 3 | RNVC: 1
AS3257-03: RNCC: 3 | RNVC: 2
AS3257-03: RNCC: 3 | RNVC: 9
389-5: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-840-0955
Bow Handle

008400955
NASM39087: RNCC: 3 | RNVC: 1
MS39087-2: RNCC: 3 | RNVC: 2
B 1005-14: RNCC: 3 | RNVC: 2
05-MS39087-2: RNCC: 5 | RNVC: 2
990002-2: RNCC: 5 | RNVC: 2
1005-14: RNCC: 5 | RNVC: 9
SM91-2: RNCC: 5 | RNVC: 9
MS39087-2: RNCC: 5 | RNVC: 9
415-1965-01-12: RNCC: 5 | RNVC: 9
1965-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-995-0566
Loop Clamp

009950566
NASM21322: RNCC: 3 | RNVC: 1
MS21322-42: RNCC: 3 | RNVC: 2
MS21322-42: RNCC: 5 | RNVC: 9
5340009950566: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-133-4417
Retaining Clip

011334417
10A13-C-041: RNCC: 3 | RNVC: 2
10A13C041: RNCC: 3 | RNVC: 2
10A13-C-041: RNCC: 3 | RNVC: 9

15 Jun 1982

5340-01-190-7677
Loop Clamp

011907677
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-12SW: RNCC: 3 | RNVC: 2

30 Sep 1984

5340-01-198-3509
Loop Clamp

011983509
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-26N: RNCC: 3 | RNVC: 2

7 Jan 1985

5340-01-131-9924
Angle Bracket

011319924
SAE-AS9600: RNCC: 3 | RNVC: 1
MS9600-222: RNCC: 3 | RNVC: 2
MS9600-222: RNCC: 5 | RNVC: 9

20 May 1982

5340-00-968-7831
Hand Lantern Bracket Assembly

009687831
M16377/53-003: RNCC: 2 | RNVC: 2
M16377-53-003: RNCC: 2 | RNVC: 2
MIL-DTL-16377/53: RNCC: 4 | RNVC: 1
MILF16377-53: RNCC: 5 | RNVC: 9
MS17231PC25-29: RNCC: 5 | RNVC: 9
6230PL1376360: RNCC: 6 | RNVC: 9
M16377/53-003: RNCC: C | RNVC: 1
M16337-53-003: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-664-7024
Loop Clamp

006647024
AN742-15: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-010-4408
Angle Bracket

010104408
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-548: RNCC: 3 | RNVC: 2
MS9593-548: RNCC: 3 | RNVC: 9
MS9593-548: RNCC: 5 | RNVC: 9
5340PL0886189: RNCC: 6 | RNVC: 9

29 Sep 1975

5340-00-967-1584
Buckle

009671584
NAS1211: RNCC: 3 | RNVC: 1
NAS1211F15: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-00-713-2917
Loop Clamp

007132917
35325: RNCC: 3 | RNVC: 2
U112: RNCC: 3 | RNVC: 2
A112: RNCC: 3 | RNVC: 2
X150: RNCC: 3 | RNVC: 2
120214A: RNCC: 5 | RNVC: 2
UCL150: RNCC: 5 | RNVC: 2
4071: RNCC: 5 | RNVC: 9
240265: RNCC: 5 | RNVC: 9
C112: RNCC: 5 | RNVC: 9
0240265-00: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-664-3115
Line Supporting Strap

006643115
668-3-6FR: RNCC: 3 | RNVC: 2
6710527: RNCC: 5 | RNVC: 2
487 722: RNCC: 5 | RNVC: 2
214-1052P1: RNCC: 5 | RNVC: 2
214-1052P1: RNCC: 5 | RNVC: 2
6710527: RNCC: 5 | RNVC: 2
R93AB006: RNCC: 5 | RNVC: 9
8376679: RNCC: 5 | RNVC: 9
6500-295925: RNCC: 5 | RNVC: 9
5340006643115: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-768-0600
Spring Tension Clip

007680600
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-302: RNCC: 3 | RNVC: 2
1018990-002: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-302: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-966-2390
Retaining Strap

009662390
NASM21315: RNCC: 3 | RNVC: 1
MS21315-3: RNCC: 3 | RNVC: 2
FF-S-760: RNCC: 5 | RNVC: 9
MS21315-3: RNCC: 5 | RNVC: 9

13 Jun 1966

5340-00-813-4477
Spring Tension Clip

008134477
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-08C: RNCC: 3 | RNVC: 2
NAS1464-050-08T: RNCC: C | RNVC: 1

1 Jan 1962

5340-01-006-5645
Loop Clamp

010065645
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C22KH: RNCC: 3 | RNVC: 2
MS9350-21: RNCC: 5 | RNVC: 9

18 Jul 1975

5340-00-964-1400
Loop Clamp

009641400
NASM21333: RNCC: 3 | RNVC: 1
MS21333-8: RNCC: 3 | RNVC: 2
MS21333-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-767-5187
Turbine Spring Seat

007675187
799599: RNCC: 3 | RNVC: 2
799599: RNCC: 5 | RNVC: 2
799599: RNCC: 5 | RNVC: 2
799599: RNCC: 5 | RNVC: 2
799599: RNCC: 5 | RNVC: 2
799599: RNCC: 5 | RNVC: 9
799599: RNCC: 5 | RNVC: 9
799599: RNCC: 5 | RNVC: 9
799599: RNCC: 5 | RNVC: 9
799599: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-813-5827
Bow Handle

008135827
10923-A-1024-2: RNCC: 3 | RNVC: 9
127850-103: RNCC: 5 | RNVC: 2
30-3106-11: RNCC: 5 | RNVC: 2
715010-17: RNCC: 5 | RNVC: 2
1646: RNCC: 5 | RNVC: 9
2385-1-14: RNCC: 5 | RNVC: 9
415-2385-01-14-00: RNCC: 5 | RNVC: 9
2016290PC1: RNCC: 5 | RNVC: 9
2385-1: RNCC: 5 | RNVC: 9
415-2385-01-14: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-902-9726
Loop Clamp

009029726
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P3N: RNCC: 3 | RNVC: 2
A05762: RNCC: 5 | RNVC: 2
M179-26: RNCC: 5 | RNVC: 2
MS25281-3: RNCC: 5 | RNVC: 2
MS25281-3: RNCC: 5 | RNVC: 9
NAS1397-3: RNCC: 5 | RNVC: 9
40582000769: RNCC: 5 | RNVC: 9
10062860: RNCC: 6 | RNVC: 9
5340009029726: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-849-3503
Retaining Strap

008493503
8668257: RNCC: 3 | RNVC: 2
1015008493503: RNCC: 6 | RNVC: 9

4 Jan 1967

5340-00-687-7586
Butt Hinge Leaf

006877586
MS20001PH12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PN12: RNCC: 5 | RNVC: 1
MS20001PH12: RNCC: 5 | RNVC: 9
4127000-39: RNCC: 5 | RNVC: 9
L3051650-005: RNCC: C | RNVC: 1
A02D8067-85: RNCC: C | RNVC: 1
A02S8067-86: RNCC: C | RNVC: 1
MS20001X12-1502: RNCC: E | RNVC: 8
MS20001X12-1502: RNCC: E | RNVC: 8

1 Jan 1963

5340-01-005-4266
Spring Tension Clip

010054266
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-334: RNCC: 3 | RNVC: 2
100-200-12A-25: RNCC: 5 | RNVC: 1
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066-2-334: RNCC: 5 | RNVC: 9
6019-91A: RNCC: 5 | RNVC: 9
M24066-2-134: RNCC: 5 | RNVC: 9

24 Jun 1975

5340-01-191-3451
Butt Hinge

011913451
A-A-55587-8: RNCC: 2 | RNVC: 2
A-A-55587: RNCC: 4 | RNVC: 1
FF-H-116: RNCC: 5 | RNVC: 9
MS27968-8: RNCC: 5 | RNVC: 9

7 Oct 1984

5340-01-181-1426
Loop Clamp

011811426
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCH03: RNCC: 3 | RNVC: 2
AS21919WCH03: RNCC: 5 | RNVC: 9
AS21919WCH3: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-01-710-9549
Access Cover

017109549
761958: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-711-0843
Stand And Roller Pipe Support Extension Tube

017110843
KHR503882M00: RNCC: 3 | RNVC: 2

19 Jul 2023

5340-01-711-0854
Spring Holder

017110854
KHR503233M00: RNCC: 3 | RNVC: 2

19 Jul 2023

5340-00-916-4500
Loop Clamp

009164500
NASM21322: RNCC: 3 | RNVC: 1
MS21322-2: RNCC: 3 | RNVC: 2
MS21322-2: RNCC: 5 | RNVC: 9
NASM21322-M21322-2: RNCC: 5 | RNVC: 9

15 Jul 1966

5340-00-915-8118
Angle Bracket

009158118
MS9101-32: RNCC: 2 | RNVC: 2
MS9101: RNCC: 4 | RNVC: 1

16 Nov 1965

5340-00-818-2064
Butt Hinge

008182064
MS20257C2-4800: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
7900834-01: RNCC: 5 | RNVC: 1
4240704-15: RNCC: 5 | RNVC: 1
MS20257C2-1300: RNCC: 5 | RNVC: 9
MS20257C2-2650: RNCC: 5 | RNVC: 9
MS20257C2&1200: RNCC: 5 | RNVC: 9
MS20257C2-0190: RNCC: 5 | RNVC: 9
MS20257C2-1250: RNCC: 5 | RNVC: 9
MS20257C2-500: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-670-1827
Clamp Bolt Assembly

006701827
NAS573: RNCC: 3 | RNVC: 1
NAS573-10: RNCC: 3 | RNVC: 2
5342PL0835496: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-259-4242
Webbing Strap

012594242
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10KK6: RNCC: 3 | RNVC: 2

17 Jul 1987

5340-01-257-3398
Bow Handle

012573398
NASM39087: RNCC: 3 | RNVC: 1
NASM39087-413CP: RNCC: 3 | RNVC: 2
MS39087-206CP: RNCC: 5 | RNVC: 9
MS39087-413CP: RNCC: C | RNVC: 1

17 Jun 1987

5340-01-247-1213
Angle Bracket

012471213
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-425: RNCC: 3 | RNVC: 2
MS9593-425: RNCC: 5 | RNVC: 9

26 Dec 1986

5340-01-232-1846
Electrical-Mechanical Equipment Post

012321846
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D30: RNCC: 3 | RNVC: 2

9 May 1986

5340-01-231-5519
Spring Tension Clip

012315519
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-098-10C: RNCC: 3 | RNVC: 2

29 Apr 1986

5340-01-243-5384
Electrical-Mechanical Equipment Post

012435384
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C10: RNCC: 3 | RNVC: 2
1944684-62: RNCC: 5 | RNVC: 2
8396-A-0632-16: RNCC: 5 | RNVC: 2
8396-A-0632-16: RNCC: 5 | RNVC: 9
NAS1786A06-10: RNCC: 5 | RNVC: 9
04306-0230: RNCC: C | RNVC: 1
8424: RNCC: C | RNVC: 1
7135276P003: RNCC: C | RNVC: 1
8396-A-0632: RNCC: C | RNVC: 1

29 Oct 1986

5340-01-229-7707
Electrical-Mechanical Equipment Post

012297707
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E18: RNCC: 3 | RNVC: 2
5544087-001: RNCC: C | RNVC: 1

6 Apr 1986

NSN 5340-01-228-6048 012286048 STANDOFF,THREADED,SPACING

5340-01-228-6048
Spacing Threaded Standoff

012286048
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C06: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-01-213-7874
Electrical-Mechanical Equipment Post

012137874
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B12: RNCC: 3 | RNVC: 2
NAS1831AC3B12: RNCC: C | RNVC: 1

30 Jul 1985

5340-01-213-5534
Loop Clamp

012135534
MS9826-07N: RNCC: 2 | RNVC: 2
MS9826: RNCC: 4 | RNVC: 1
MS9826-07: RNCC: 5 | RNVC: 9

27 Jul 1985

5340-01-212-0624
Spacing Threaded Standoff

012120624
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B07: RNCC: 3 | RNVC: 2

6 Jul 1985

5340-01-201-5479
Electronic Equipment Hardware Kit

012015479
2810-11-0022: RNCC: 3 | RNVC: 2
HLMP-0103: RNCC: 3 | RNVC: 2
NSC003: RNCC: 5 | RNVC: 2
970620: RNCC: 5 | RNVC: 2
HLMP-0103: RNCC: 5 | RNVC: 2
30-733-3026-03: RNCC: 5 | RNVC: 2
SE35001-901: RNCC: 5 | RNVC: 2
91315178H: RNCC: 5 | RNVC: 2
171-1335: RNCC: 5 | RNVC: 2
885KM0005: RNCC: 5 | RNVC: 2

20 Feb 1985

5340-01-200-3609
Angle Bracket

012003609
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-022: RNCC: 3 | RNVC: 2
MS9592-022: RNCC: 3 | RNVC: 9
9682013406: RNCC: 5 | RNVC: 2
SAE-AS9592-022: RNCC: 5 | RNVC: 9
MS9592-022: RNCC: 5 | RNVC: 9
968.20.13.406: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-01-109-9415
Angle Bracket

011099415
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-164: RNCC: 3 | RNVC: 2
MS9593-164: RNCC: 3 | RNVC: 9
MS9593-164: RNCC: 5 | RNVC: 9

24 Mar 1981

5340-01-097-8276
Dust And Moisture Seal Protective Cap

010978276
NAS832: RNCC: 3 | RNVC: 1
NAS832-10: RNCC: 3 | RNVC: 2
MIL-C-5501/11: RNCC: 5 | RNVC: 9
M5501/11-F11: RNCC: 5 | RNVC: 9
5340PL0847229: RNCC: 6 | RNVC: 9
CD-10: RNCC: C | RNVC: 1

19 Jul 1980

5340-01-077-3593
Loop Clamp

010773593
NASM21333: RNCC: 3 | RNVC: 1
MS21333-22: RNCC: 3 | RNVC: 2
MS21333-22: RNCC: 5 | RNVC: 9

22 May 1979

5340-01-076-6682
Loop Clamp

010766682
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-9NW: RNCC: 3 | RNVC: 2

9 May 1979

5340-01-055-4206
Butt Hinge

010554206
AA55592-14A: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-14A: RNCC: 5 | RNVC: 1
MS35825-14A: RNCC: 5 | RNVC: 1

4 Feb 1978

5340-01-048-3079
Spring Tension Clip

010483079
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-308: RNCC: 3 | RNVC: 2
MS24066/2-308: RNCC: 5 | RNVC: 2
M24066/2-308: RNCC: 5 | RNVC: 9
NASM24066/2-308: RNCC: 5 | RNVC: 9
M24066/2-108: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
DX514768PC4: RNCC: 5 | RNVC: 9
DX514768PC4: RNCC: 5 | RNVC: 9
6010-5A: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-01-040-5953
Sealing Plug Assembly

010405953
PLGA1871010A: RNCC: 3 | RNVC: 2
75422-11: RNCC: 5 | RNVC: 2
PLGA1871010: RNCC: 5 | RNVC: 2
649-052-011-0: RNCC: 5 | RNVC: 2
ST7M141D6L: RNCC: 5 | RNVC: 2
S8-187101: RNCC: 5 | RNVC: 2
187101: RNCC: 5 | RNVC: 2
SP780-104: RNCC: 5 | RNVC: 9
1871010: RNCC: 5 | RNVC: 9
SP780-104: RNCC: 5 | RNVC: 9

9 May 1977

5340-01-039-8875
Spring Tension Clip

010398875
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-017: RNCC: 3 | RNVC: 2
MILC24066/4C: RNCC: 5 | RNVC: 9
M24066-4-017: RNCC: 5 | RNVC: 9
M24066/4-017: RNCC: C | RNVC: 1

28 Apr 1977

5340-01-038-9481
Loop Clamp

010389481
COV0509Z1: RNCC: 3 | RNVC: 2
1912-133: RNCC: 5 | RNVC: 2
S75868: RNCC: 5 | RNVC: 2
C0V-0509: RNCC: 5 | RNVC: 9
C0V050971: RNCC: 5 | RNVC: 9
33855AX: RNCC: 5 | RNVC: 9
33855AX: RNCC: 7 | RNVC: 2
12600954-002: RNCC: 7 | RNVC: 2
11581635: RNCC: 7 | RNVC: 2
3760615: RNCC: C | RNVC: 1

15 Apr 1977

5340-01-039-0334
Dust And Moisture Seal Protective Cap-Plug

010390334
NAS834: RNCC: 3 | RNVC: 1
NAS834-75: RNCC: 3 | RNVC: 2
M5501/7-F18: RNCC: 5 | RNVC: 9
MILC5501: RNCC: 5 | RNVC: 9
M5501-7F18: RNCC: C | RNVC: 1

16 Apr 1977

5340-01-036-0473
Snap Hook

010360473
PS70099-1: RNCC: 3 | RNVC: 2
MS70099: RNCC: 5 | RNVC: 9
F3950-000074: RNCC: 6 | RNVC: 9

19 Feb 1977

5340-01-014-3640
Sealing Plug Assembly

010143640
SAE-AS3588: RNCC: 3 | RNVC: 1
AS3588-05: RNCC: 3 | RNVC: 2
AS3588-05: RNCC: 3 | RNVC: 9
PLGA2180010: RNCC: 5 | RNVC: 2
P34449: RNCC: 5 | RNVC: 2
69452A2: RNCC: 5 | RNVC: 2
HS4100A2180: RNCC: 5 | RNVC: 9
5S4100A2180: RNCC: 5 | RNVC: 9
679B756P3: RNCC: 5 | RNVC: 9
HS4100A2180: RNCC: 5 | RNVC: 9

23 Dec 1975

NSN 5340-01-014-4535 010144535 HINGE,BUTT

5340-01-014-4535
Butt Hinge

010144535
AA50432 TYII, CLI STB 3X3 1.5: RNCC: 2 | RNVC: 2
A-A-50432: RNCC: 4 | RNVC: 1
A-A-50432: RNCC: 5 | RNVC: 9
MIL-H-1237: RNCC: 5 | RNVC: 9
AA50432 TYII, CLI STB 3X3: RNCC: 5 | RNVC: 9

23 Dec 1975

5340-00-192-0400
Headless Straight Rod

001920400
AA55589-11C: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
AA55589-11C: RNCC: 5 | RNVC: 9
MS27990-1C: RNCC: 5 | RNVC: 9

29 Jan 1969

5340-00-139-7498
Catch Strike

001397498
D110278: RNCC: 3 | RNVC: 2
16-01185-001: RNCC: 5 | RNVC: 2
136423-1: RNCC: 5 | RNVC: 2
D110278: RNCC: 5 | RNVC: 2
537367-1: RNCC: 5 | RNVC: 2
D110278: RNCC: 5 | RNVC: 2
50-055-1: RNCC: 5 | RNVC: 2
3522 500 24493: RNCC: 5 | RNVC: 2
2128330-2: RNCC: 5 | RNVC: 2
16610147-002: RNCC: 5 | RNVC: 2

18 Aug 1971

5340-00-193-0105
Loop Clamp

001930105
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-13: RNCC: 3 | RNVC: 2
21C2205-030: RNCC: 5 | RNVC: 1
AN735-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-190-1706
Loop Clamp

001901706
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122926: RNCC: 3 | RNVC: 2
MS122926: RNCC: 3 | RNVC: 9
MS122926: RNCC: 5 | RNVC: 9

5 Mar 1971

5340-00-186-3415
Loop Clamp

001863415
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D17: RNCC: 3 | RNVC: 2
AS5587D17: RNCC: 3 | RNVC: 9
C8063ANDTYPE1ANDCLASSA: RNCC: 5 | RNVC: 9
AN742D17: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-186-3388
Loop Clamp

001863388
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D28: RNCC: 3 | RNVC: 2
AS5587D28: RNCC: 3 | RNVC: 9
755-28: RNCC: 5 | RNVC: 1
MS21103D28: RNCC: 5 | RNVC: 9
AN742D28: RNCC: 5 | RNVC: 9
10117277: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-186-3412
Loop Clamp

001863412
AN742D20: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AN742D20: RNCC: 5 | RNVC: 1
AN742TYPE742D20: RNCC: 5 | RNVC: 1
R42C18205-185: RNCC: 5 | RNVC: 1
755-20: RNCC: 5 | RNVC: 1
192-42119: RNCC: 5 | RNVC: 9
5340PL0727357: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-069-4932
Rod End Connector

000694932
MS21255-6LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-067-9887
Aviation Turnbuckle Body

000679887
MS21251-B9L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-067-3869
Plug Button

000673869
NAS451: RNCC: 3 | RNVC: 1
NAS-451-17: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-062-0870
Spring Tension Clip

000620870
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-032-05C: RNCC: 3 | RNVC: 2
NAS1464-032-05: RNCC: 5 | RNVC: 9
NAS1464-032-050: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-059-4054
Angle Bracket

000594054
MS9229-05: RNCC: 2 | RNVC: 2
MS9229: RNCC: 4 | RNVC: 1

1 Jan 1961

5340-00-064-5758
Nut And Bolt Locking Plate

000645758
NAS1193: RNCC: 3 | RNVC: 1
NAS1193-7C: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-061-9215
Bow Handle

000619215
B 1012-14: RNCC: 3 | RNVC: 2
9M215B0400-14: RNCC: 5 | RNVC: 2
BR-3052-1032-40: RNCC: 5 | RNVC: 2
8112-4000-1032B11: RNCC: 5 | RNVC: 2
9M215B0400-14: RNCC: 5 | RNVC: 2
9M215B0400-14: RNCC: 5 | RNVC: 2
9M215B0400-14: RNCC: 5 | RNVC: 2
9M215B0400-14: RNCC: 5 | RNVC: 2
BR3052-1032-14: RNCC: 5 | RNVC: 2
25R5-10C064B3: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-01-413-6684
Retaining Strap

014136684
1S0994: RNCC: 3 | RNVC: 2
1S-0994: RNCC: 5 | RNVC: 2

18 May 1995

5340-01-231-8551
Electrical-Mechanical Equipment Post

012318551
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D28: RNCC: 3 | RNVC: 2
NAS1786C08-28: RNCC: C | RNVC: 1

6 May 1986

5340-01-222-2466
Electrical-Mechanical Equipment Post

012222466
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5C24: RNCC: 3 | RNVC: 2
210-1004P11: RNCC: C | RNVC: 1
5606-0132: RNCC: E | RNVC: 8
5606-0132: RNCC: E | RNVC: 8

10 Dec 1985

5340-01-236-6260
Loop Clamp

012366260
SAE-AS9354: RNCC: 3 | RNVC: 1
MS9354-15: RNCC: 3 | RNVC: 2
MS9354-15: RNCC: 3 | RNVC: 9
MS9354-15: RNCC: 5 | RNVC: 9

20 Jul 1986

5340-01-236-2205
Webbing Strap

012362205
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R20AA72: RNCC: 3 | RNVC: 2

15 Jul 1986

5340-01-222-2461
Electrical-Mechanical Equipment Post

012222461
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B14: RNCC: 3 | RNVC: 2
7020N: RNCC: 5 | RNVC: 2
7020N: RNCC: 5 | RNVC: 9
SM-B-988530-3: RNCC: 7 | RNVC: 2
2063-440-SS-20: RNCC: C | RNVC: 1
8110-SS-0440-7: RNCC: C | RNVC: 1
532353-410: RNCC: C | RNVC: 1
NAS1786C04-14: RNCC: C | RNVC: 1
2504203-43: RNCC: C | RNVC: 1

10 Dec 1985

5340-01-220-0161
Mortise Lock Set

012200161
BHMA-A156.13: RNCC: 3 | RNVC: 1
BHMA-A156.13 F08 GRADE 1: RNCC: 3 | RNVC: 2
ANSI A156.13 F08 GRADE 1: RNCC: 5 | RNVC: 9
1600A: RNCC: 5 | RNVC: 9

6 Nov 1985

5340-01-276-1803
Retaining Strap

012761803
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-52N: RNCC: 3 | RNVC: 2

5 Apr 1988

5340-01-218-8533
Retaining Strap

012188533
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D7-16N: RNCC: 3 | RNVC: 2

19 Oct 1985

5340-01-218-7335
Electrical-Mechanical Equipment Post

012187335
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C10: RNCC: 3 | RNVC: 2
8217-SS-0632-7: RNCC: 3 | RNVC: 2
8217SS0632-7: RNCC: 5 | RNVC: 2
5165228-2: RNCC: 5 | RNVC: 2
S5377YR0015: RNCC: 5 | RNVC: 2
532353-608: RNCC: 5 | RNVC: 2
386D0100-143: RNCC: 5 | RNVC: 2
HSS-14010-632-12: RNCC: 5 | RNVC: 9
8217-SS-0632-7: RNCC: 5 | RNVC: 9

18 Oct 1985

5340-01-274-2996
Butt Hinge Leaf

012742996
MS20001PH4-0350: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
70207-22228-123: RNCC: 5 | RNVC: 1

7 Mar 1988

5340-01-273-9882
Angle Bracket

012739882
MS9593-248: RNCC: 2 | RNVC: 2
SAE-AS9593: RNCC: 5 | RNVC: 1

4 Mar 1988

5340-01-271-5242
Electrical-Mechanical Equipment Post

012715242
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C11: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-01-270-5668
Loop Clamp

012705668
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-24S: RNCC: 3 | RNVC: 2
TA774SS2-24HR: RNCC: 3 | RNVC: 2

8 Jan 1988

5340-01-263-8552
Loop Clamp

012638552
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-13T: RNCC: 3 | RNVC: 2
NAS1712D8-13S: RNCC: C | RNVC: 1

20 Sep 1987

5340-01-312-5369
Mounting Bracket

013125369
16K2341-838: RNCC: 3 | RNVC: 2
16K2341-838: RNCC: 5 | RNVC: 2
16K2341-838: RNCC: 5 | RNVC: 2
16K2341-838: RNCC: 5 | RNVC: 9
5340PL2062210: RNCC: 6 | RNVC: 9

17 Dec 1989

5340-01-312-0134
Electrical-Mechanical Equipment Post

013120134
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C04: RNCC: 3 | RNVC: 2
10129632: RNCC: 6 | RNVC: 9

8 Dec 1989

5340-01-239-2684
Loop Clamp

012392684
M85052/2-3: RNCC: 2 | RNVC: 2
MIL-DTL-85052/2: RNCC: 4 | RNVC: 1
MIL-C-85052/2: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-01-310-5333
Retaining Strap

013105333
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8W27N: RNCC: 3 | RNVC: 2

7 Nov 1989

5340-01-299-7803
Electrical-Mechanical Equipment Post

012997803
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E24: RNCC: 3 | RNVC: 2

5 May 1989

5340-01-237-4741
Electrical-Mechanical Equipment Post

012374741
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D12: RNCC: 3 | RNVC: 2

31 Jul 1986

5340-01-222-2467
Electrical-Mechanical Equipment Post

012222467
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C24: RNCC: 3 | RNVC: 2
152-0136-005: RNCC: 5 | RNVC: 2
66-13524-15: RNCC: E | RNVC: 8

10 Dec 1985

5340-01-206-2914
Spacing Threaded Standoff

012062914
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C04: RNCC: 3 | RNVC: 2
NAS1831-C4C04: RNCC: C | RNVC: 1

17 Apr 1985

5340-01-253-8961
Angle Bracket

012538961
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-248: RNCC: 3 | RNVC: 2
MS9593-248: RNCC: 3 | RNVC: 9
MS9593-248: RNCC: 5 | RNVC: 9

27 Apr 1987

5340-01-240-2413
Electrical-Mechanical Equipment Post

012402413
NAS1831: RNCC: 3 | RNVC: 1
NAS1786A06-14: RNCC: 3 | RNVC: 2
NAS1831A4C14: RNCC: 3 | RNVC: 2
8346: RNCC: E | RNVC: 8
8346: RNCC: E | RNVC: 8

11 Sep 1986

5340-01-302-6255
Retaining Strap

013026255
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D30-40N: RNCC: 3 | RNVC: 2
10113120: RNCC: 6 | RNVC: 9

16 Jun 1989

5340-01-302-2960
Loop Clamp

013022960
MS25281-4: RNCC: 2 | RNVC: 2
SAE-AS25281: RNCC: 5 | RNVC: 1

15 Jan 1998

5340-01-251-6432
Loop Clamp

012516432
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D12S: RNCC: 3 | RNVC: 2
LE127-0013-0112: RNCC: 5 | RNVC: 9
TA11C82D12HB: RNCC: 5 | RNVC: 9

21 Mar 1987

5340-01-144-2391
Loop Clamp

011442391
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-8T: RNCC: 3 | RNVC: 2
10112744: RNCC: 6 | RNVC: 9

16 Dec 1982

5340-01-106-0458
Snap Hook

011060458
NASM43770/14: RNCC: 3 | RNVC: 1
M43770/14-MIZ1: RNCC: 3 | RNVC: 2
MIL-S-43770/14: RNCC: 5 | RNVC: 9
M43770/14-MIZ1: RNCC: 5 | RNVC: 9

10 Jan 1981

5340-01-131-5579
Loop Clamp

011315579
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D8-18N: RNCC: 3 | RNVC: 2
10112590: RNCC: 6 | RNVC: 9

12 May 1982

5340-01-131-7867
Retaining Strap

011317867
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-24N: RNCC: 3 | RNVC: 2

15 May 1982

5340-01-131-5575
Loop Clamp

011315575
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C15-8S: RNCC: 3 | RNVC: 2
10112586: RNCC: 6 | RNVC: 9

12 May 1982

5340-01-082-6423
Loop Clamp

010826423
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C14KH: RNCC: 3 | RNVC: 2
MS9350-13: RNCC: 5 | RNVC: 9

6 Sep 1979

5340-01-126-9180
Loop Clamp

011269180
M85052/3-12: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000112HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112503: RNCC: 6 | RNVC: 9

19 Feb 1982

5340-01-081-5690
Loop Clamp

010815690
MS21106-4: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

16 Aug 1979

5340-01-122-9175
Loop Clamp

011229175
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-8N: RNCC: 3 | RNVC: 2
10112426: RNCC: 6 | RNVC: 9

2 Dec 1981

5340-01-103-0269
Loop Clamp

011030269
M85052/3-5: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA26000105HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10117630: RNCC: 6 | RNVC: 9

1 Nov 1980

5340-01-168-9786
Dust And Moisture Seal Protective Cap

011689786
NAS847: RNCC: 3 | RNVC: 1
NAS844-28: RNCC: 3 | RNVC: 2
MIL-C-5501/9: RNCC: 5 | RNVC: 9
M5501/9-F34: RNCC: 5 | RNVC: 9

30 Dec 1983

5340-01-106-5436
Rod End Locking Retainer

011065436
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K7CP: RNCC: 3 | RNVC: 2

21 Jan 1981

5340-01-167-7860
Butt Hinge Leaf

011677860
MS20001X8-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
128W10264-15: RNCC: 5 | RNVC: 1

6 Dec 1983

5340-01-146-9729
Dust And Moisture Seal Protective Plug

011469729
M5501/2-R10: RNCC: 2 | RNVC: 2
MIL-C-5501/2: RNCC: 4 | RNVC: 1
MIL-C-5501: RNCC: 5 | RNVC: 9

9 Feb 1983

5340-01-114-2491
Loop Clamp

011142491
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R8EN: RNCC: 3 | RNVC: 2
NAS1397R8N: RNCC: 5 | RNVC: 9

15 Jun 1981

5340-01-072-9342
Plug Button

010729342
207-090201-00-0101: RNCC: 3 | RNVC: 2
9172: RNCC: 5 | RNVC: 2
207-090201-00-0108: RNCC: 5 | RNVC: 9
251-017: RNCC: 5 | RNVC: 9
31-15-4561-1: RNCC: 7 | RNVC: 2
31-15-4561: RNCC: D | RNVC: 9

6 Mar 1979

5340-01-103-0271
Loop Clamp

011030271
M85052/3-6: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000106HC: RNCC: 5 | RNVC: 1
M85052/3-6: RNCC: 5 | RNVC: 2
MIL-C-85052/3: RNCC: 5 | RNVC: 9
9M972-6S: RNCC: 5 | RNVC: 9
10117632: RNCC: 6 | RNVC: 9

1 Nov 1980

5340-00-574-6018
Rod End Locking Retainer

005746018
NAS559: RNCC: 3 | RNVC: 1
NAS559-3: RNCC: 3 | RNVC: 2
5340PL1881901: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-029-0022
Helical Compression Spring Seat

000290022
5303467: RNCC: 3 | RNVC: 2
45603: RNCC: 3 | RNVC: 2
89259: RNCC: 3 | RNVC: 2
67641: RNCC: 3 | RNVC: 2
A14197: RNCC: 5 | RNVC: 2
38015: RNCC: 5 | RNVC: 2
A14198: RNCC: 5 | RNVC: 2
TID19895: RNCC: 5 | RNVC: 2
0087439-6: RNCC: 5 | RNVC: 2
38016: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-480-8637
Retaining Strap

004808637
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W40N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-480-3689
Retaining Strap

004803689
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-14: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-026-2011
Webbing Strap

000262011
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10JK47: RNCC: 3 | RNVC: 2
NAS1384E44LR: RNCC: E | RNVC: 8

24 Oct 1972

5340-00-530-8539
Loop Clamp

005308539
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D72: RNCC: 3 | RNVC: 2
AN735D72: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-103-2880
Loop Clamp

001032880
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D20-10N: RNCC: 3 | RNVC: 2
10117250: RNCC: 6 | RNVC: 9
TA519D20-10: RNCC: C | RNVC: 1

12 Jun 1968

5340-00-530-5355
Rod End Clevis

005305355
AN665-34L: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-478-0350
Loop Clamp

004780350
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7KH: RNCC: 3 | RNVC: 2
MS9350-06: RNCC: 5 | RNVC: 9

20 May 1970

5340-00-598-0432
Loop Clamp

005980432
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122901: RNCC: 3 | RNVC: 2
MS122901: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-543-3915
Retaining Strap

005433915
NASM760: RNCC: 3 | RNVC: 1
MS35140-2: RNCC: 3 | RNVC: 2
47837: RNCC: 5 | RNVC: 1
MS35140-2: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9
10290189: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-470-5925
Rim Latch

004705925
51L1-1X1AA: RNCC: 3 | RNVC: 2
BAZM00261: RNCC: 5 | RNVC: 2
V951L04-1X1AF: RNCC: 5 | RNVC: 2
V951L04-1X1AF: RNCC: 5 | RNVC: 2
5801434-206000.02: RNCC: 5 | RNVC: 2
91394198: RNCC: 5 | RNVC: 2
51L1-1X1AA: RNCC: 5 | RNVC: 2
BAZ2429: RNCC: 5 | RNVC: 2
50267210: RNCC: 5 | RNVC: 2
21187-00139: RNCC: 5 | RNVC: 2

19 Aug 1970

5340-00-550-5941
Butt Hinge

005505941
MS20001P16-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001P16-7200: RNCC: 5 | RNVC: 1
MS20001P16-350: RNCC: C | RNVC: 1
MS20001P16-1075: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-158-4188
Angle Bracket

001584188
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-142: RNCC: 3 | RNVC: 2
MS9592-142: RNCC: 3 | RNVC: 9
MS9592-142: RNCC: 5 | RNVC: 9

27 Aug 1971

5340-00-017-8095
Butt Hinge Leaf

000178095
MS20001X4-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001-4: RNCC: C | RNVC: 1

1 Jan 1961

5340-00-410-2344
Spring Tension Clip

004102344
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B101-18T: RNCC: 3 | RNVC: 2

13 Aug 1969

5340-00-239-8148
Manual Control Handle

002398148
NAS1637: RNCC: 3 | RNVC: 1
NAS1637-3P: RNCC: 3 | RNVC: 2
418914-8: RNCC: 5 | RNVC: 9
61L2+2+1AC: RNCC: C | RNVC: 1

31 Oct 1969

5340-00-193-0138
Loop Clamp

001930138
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D4: RNCC: 3 | RNVC: 2
AN735D4: RNCC: 5 | RNVC: 9
5340PL0964002: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-199-3742
Angle Bracket

001993742
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-156: RNCC: 3 | RNVC: 2
MS9601-156: RNCC: 3 | RNVC: 9
MS9601-156: RNCC: 5 | RNVC: 9

29 Jan 1969

5340-00-193-2599
Loop Clamp

001932599
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D64: RNCC: 3 | RNVC: 2
AS5587D64: RNCC: 3 | RNVC: 9
C8603ANDTYPE1ANDCLASSA: RNCC: 5 | RNVC: 9
AN742D64: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-4927
Rod End Connector

000694927
MS21255-5RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-193-2605
Loop Clamp

001932605
AN742D56: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-193-0116
Loop Clamp

001930116
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D8: RNCC: 3 | RNVC: 2
AN735D8: RNCC: 3 | RNVC: 9
LS5911BTP106: RNCC: 5 | RNVC: 9
AS7351D8: RNCC: 5 | RNVC: 9
AN735D8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-193-0129
Loop Clamp

001930129
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D19: RNCC: 3 | RNVC: 2
AN735D19: RNCC: 3 | RNVC: 9
AN735D19: RNCC: 5 | RNVC: 9
10117286: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-170-1883
Dust And Moisture Seal Boot

001701883
FC5994: RNCC: 3 | RNVC: 2
637546: RNCC: 5 | RNVC: 2
F5994: RNCC: 5 | RNVC: 2
331980: RNCC: 5 | RNVC: 2
000-07-853173: RNCC: 5 | RNVC: 2
29700: RNCC: 5 | RNVC: 2
7348851: RNCC: 5 | RNVC: 2
29700: RNCC: 5 | RNVC: 9
4984295: RNCC: 5 | RNVC: 9
000615-1432: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-480-9940
Loop Clamp

004809940
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D18-48N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-031-0489
Spring Tension Clip

000310489
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-102: RNCC: 3 | RNVC: 2
MILC24066: RNCC: 5 | RNVC: 9
M24066/4-102: RNCC: 5 | RNVC: 9

28 Oct 1972

5340-00-282-7532
Loop Clamp

002827532
NASM21333: RNCC: 3 | RNVC: 1
MS21333-56: RNCC: 3 | RNVC: 2
MS21333-56: RNCC: 5 | RNVC: 9
3290459: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-003-4025
Butt Hinge

000034025
AA55594-12C: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-12C: RNCC: 5 | RNVC: 1
MS35829-12C: RNCC: 5 | RNVC: 9
MS35829-2C: RNCC: 5 | RNVC: 9

7 Jun 1972

5340-00-282-7548
Loop Clamp

002827548
NASM21333: RNCC: 3 | RNVC: 1
MS21333-52: RNCC: 3 | RNVC: 2
MS21333-52: RNCC: 5 | RNVC: 9
5340002827548: RNCC: 5 | RNVC: 9
5340002827548: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-531-6857
Loop Clamp

005316857
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG40: RNCC: 3 | RNVC: 2
AS21919WDG40: RNCC: 3 | RNVC: 9
2823056: RNCC: 5 | RNVC: 2
2823056: RNCC: 5 | RNVC: 2
MS21919WDG40: RNCC: 5 | RNVC: 2
2823056: RNCC: 5 | RNVC: 9
5340005316857: RNCC: 5 | RNVC: 9
MS21919WDG40: RNCC: 5 | RNVC: 9
MS21919DG40: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-531-4008
Dust And Moisture Seal Protective Cap-Plug

005314008
NAS834: RNCC: 3 | RNVC: 1
NAS834-264: RNCC: 3 | RNVC: 2
4300: RNCC: 5 | RNVC: 1
44: RNCC: 5 | RNVC: 9
44: RNCC: 5 | RNVC: 9
194-514-9015: RNCC: 5 | RNVC: 9
M5501-7F48: RNCC: 5 | RNVC: 9
MILC5501: RNCC: 5 | RNVC: 9

11 Sep 1974

5340-00-282-7519
Loop Clamp

002827519
NASM21333: RNCC: 3 | RNVC: 1
MS21333-34: RNCC: 3 | RNVC: 2
13207E5469FN33: RNCC: 5 | RNVC: 1
TC253: RNCC: 5 | RNVC: 2
MS21333-34: RNCC: 5 | RNVC: 2
CC0409: RNCC: 5 | RNVC: 2
11030: RNCC: 5 | RNVC: 2
MS21333-34: RNCC: 5 | RNVC: 9
5340002827519: RNCC: 5 | RNVC: 9
TC253: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-251-0079
Nut And Bolt Retainer

002510079
977848-7: RNCC: 3 | RNVC: 2
A4972-4-3: RNCC: 5 | RNVC: 2
1310000-1: RNCC: 5 | RNVC: 2
SL231-1-250: RNCC: 5 | RNVC: 2
977848-7: RNCC: 5 | RNVC: 2
RM52LHA4972-4-3: RNCC: 5 | RNVC: 2
A4972-4-3: RNCC: 5 | RNVC: 9
RM52LHA4972-4-3: RNCC: 5 | RNVC: 9
SP-NU001-1: RNCC: 5 | RNVC: 9
977848-7: RNCC: 5 | RNVC: 9

9 Jul 1969

5340-00-250-4970
Butt Hinge

002504970
MS20257P2-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
AN257P2-7200: RNCC: 5 | RNVC: 1
MS20257P2-944: RNCC: 5 | RNVC: 1
MS20257-2-1578: RNCC: 5 | RNVC: 1
MS20257P2-7200: RNCC: 5 | RNVC: 1
MS20257P2-580: RNCC: 5 | RNVC: 9
MS20257P-944: RNCC: 5 | RNVC: 9
MS20257P2-1084: RNCC: 5 | RNVC: 9
MS20257P2-1300: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-239-0082
Loop Clamp

002390082
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D44: RNCC: 3 | RNVC: 2
AS5587D44: RNCC: 5 | RNVC: 9
AN742D44: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-071-3834
Dust And Moisture Seal Protective Cap

000713834
5657-12AA: RNCC: 3 | RNVC: 2
5657-12: RNCC: 5 | RNVC: 2
5657-12: RNCC: 5 | RNVC: 2
19080P11: RNCC: 5 | RNVC: 2
AT117367: RNCC: 5 | RNVC: 2
DP27785: RNCC: 5 | RNVC: 2
2HA866: RNCC: 5 | RNVC: 2
VDPM02948: RNCC: 5 | RNVC: 2
19501477: RNCC: 5 | RNVC: 2
BM130043: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-200-8642
Loop Clamp

002008642
AN742-17: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-338-4389
Mending Plate

003384389
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-017: RNCC: 3 | RNVC: 2
MS9552-017: RNCC: 5 | RNVC: 9

4 Jan 1974

5340-00-333-6057
Strap End Clip

003336057
MS51926-2: RNCC: 2 | RNVC: 2
MIL-C-496: RNCC: 4 | RNVC: 1
585818: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-00-318-8180
Access Cover

003188180
8364451: RNCC: 3 | RNVC: 2
2510003188180: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-014-5970
Instrument Mounting Clamp

000145970
NASM28042: RNCC: 3 | RNVC: 1
MS28042-1A: RNCC: 3 | RNVC: 2
NH1002261-10: RNCC: 5 | RNVC: 1
5801A: RNCC: 5 | RNVC: 2
975.99.21.101: RNCC: 5 | RNVC: 2
2814580: RNCC: 5 | RNVC: 2
NH1002261-10: RNCC: 5 | RNVC: 2
MS28042-1A: RNCC: 5 | RNVC: 2
2814580: RNCC: 5 | RNVC: 2
MS28042-1A: RNCC: 5 | RNVC: 9

6 May 1968

5340-00-286-9427
Loop Clamp

002869427
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG12: RNCC: 3 | RNVC: 2
AS21919WDG12: RNCC: 3 | RNVC: 9
TA1718WD12X: RNCC: 5 | RNVC: 1
830WD12G: RNCC: 5 | RNVC: 1
310-120: RNCC: 5 | RNVC: 1
JM44LC33WD12: RNCC: 5 | RNVC: 1
4116200-023: RNCC: 5 | RNVC: 1
ST9M630D12: RNCC: 5 | RNVC: 1
MS21919WDG12: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-433-3597
Spring Tension Clip

004333597
M24066-4-004: RNCC: 2 | RNVC: 2
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-004: RNCC: 3 | RNVC: 2
A05200: RNCC: 5 | RNVC: 2
MILC24066-4: RNCC: 5 | RNVC: 9

26 Aug 1970

5340-00-480-8741
Retaining Strap

004808741
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D15-39N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-240-2308
Barrel Bolt

002402308
SP1078-6US2C: RNCC: 3 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH00111TYPEF1011C: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-282-3753
Butt Hinge

002823753
MS20257C4-4800: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
AN257C4: RNCC: 5 | RNVC: 1
AN257C4-4800: RNCC: 5 | RNVC: 1
640-1485-002: RNCC: 5 | RNVC: 1
1369AS157-3: RNCC: 5 | RNVC: 1
MS20257C4-1800: RNCC: 5 | RNVC: 1
MS20257C4-4800: RNCC: 5 | RNVC: 1
MS20257C4-700: RNCC: 5 | RNVC: 9
MS20257C4-800: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-276-5853
Expansion Plug

002765853
A52420-11: RNCC: 2 | RNVC: 2
MS35648-11: RNCC: 2 | RNVC: 9
A-A-52420: RNCC: 4 | RNVC: 1
13062D: RNCC: 5 | RNVC: 1
514406: RNCC: 5 | RNVC: 1
8049: RNCC: 5 | RNVC: 1
MJ14102A: RNCC: 5 | RNVC: 1
4134A: RNCC: 5 | RNVC: 1
910014: RNCC: 5 | RNVC: 1
01905-2223: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-326-6965
Loop Clamp

013266965
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-15S: RNCC: 3 | RNVC: 2

28 Sep 1990

5340-01-305-0388
Loop Clamp

013050388
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D13-8N: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-01-304-7017
Butt Hinge Leaf

013047017
MS20001PY4-1984: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
70550-21126-128: RNCC: 5 | RNVC: 1

26 Jul 1989

5340-01-054-1581
Butt Hinge

010541581
AA55589-9A: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-9A: RNCC: 5 | RNVC: 1
MS35821-9A: RNCC: 5 | RNVC: 9

15 Jan 1978

5340-01-137-7326
Loop Clamp

011377326
M85052/1-19: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026000119NB: RNCC: 5 | RNVC: 1
S664NB19: RNCC: 5 | RNVC: 1
JM44LC70WPH19YN: RNCC: 5 | RNVC: 1
1444PHW19Y: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
9M972-19N: RNCC: C | RNVC: 1

1 Sep 1982

5340-01-054-6087
Butt Hinge

010546087
A-A-55594A-13C: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-13C: RNCC: 5 | RNVC: 1
MS35829-13C: RNCC: 5 | RNVC: 9

22 Jan 1978

5340-01-119-3981
Padlock

011193981
AA1928-2E: RNCC: 2 | RNVC: 2
A-A-1928: RNCC: 4 | RNVC: 1
175LH: RNCC: 5 | RNVC: 1
437: RNCC: 5 | RNVC: 1
1160A6: RNCC: 5 | RNVC: 1
FF-P-101 TYPE EC STYLE 2: RNCC: 5 | RNVC: 9

23 Sep 1981

5340-01-129-5593
Loop Clamp

011295593
M85052/1-7: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026000107NB: RNCC: 5 | RNVC: 1
S664NB7: RNCC: 5 | RNVC: 1
JM44LC70WPH7YN: RNCC: 5 | RNVC: 1
1444PHW7Y: RNCC: 5 | RNVC: 1
9M972-7N: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10112543: RNCC: 6 | RNVC: 9

8 Apr 1982

5340-01-092-0451
Dust And Moisture Seal Protective Plug

010920451
NAS847: RNCC: 3 | RNVC: 1
NAS845-3: RNCC: 3 | RNVC: 2
MIL-C-5501/10: RNCC: 5 | RNVC: 9
M5501/10-F5: RNCC: 5 | RNVC: 9
10117616: RNCC: 6 | RNVC: 9

18 Mar 1980

5340-00-514-3013
Loop Clamp

005143013
AN742F4: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AN742F4: RNCC: 5 | RNVC: 1
AN742C4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-170-1688
Angle Bracket

001701688
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-169: RNCC: 3 | RNVC: 2
MS9592-169: RNCC: 5 | RNVC: 9

14 Feb 1973

5340-00-436-7140
Spring Tension Clip

004367140
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B036-05C: RNCC: 3 | RNVC: 2

5 Sep 1969

5340-00-584-0252
Loop Clamp

005840252
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D17: RNCC: 3 | RNVC: 2
AN735D17: RNCC: 3 | RNVC: 9
AS7351-D17: RNCC: 5 | RNVC: 2
AN735D17: RNCC: 5 | RNVC: 9
AS7351-D17: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-230-1993
Loop Clamp

002301993
MS21106-8: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

12 Mar 1971

5340-00-051-5473
Spring Tension Clip

000515473
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-310: RNCC: 3 | RNVC: 2
946454-510: RNCC: 5 | RNVC: 1
336253-10: RNCC: 5 | RNVC: 1
M24066-2-110: RNCC: 5 | RNVC: 9
946454-510: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-310: RNCC: 5 | RNVC: 9
10117233: RNCC: 6 | RNVC: 9
M24066/2-110: RNCC: C | RNVC: 1

1 Jan 1961

5340-00-575-9140
Rod End Locking Retainer

005759140
NAS559: RNCC: 3 | RNVC: 1
NAS559-7: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-435-9372
Turnbuckle Body

004359372
MS21251A8L: RNCC: 2 | RNVC: 2
MS21251-A8L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

26 Mar 1969

5340-00-622-9132
Angle Bracket

006229132
SAE-AS9597: RNCC: 3 | RNVC: 1
MS9597-035: RNCC: 3 | RNVC: 2
MS9597-035: RNCC: 5 | RNVC: 9

1 Mar 1975

5340-01-215-6924
Electrical-Mechanical Equipment Post

012156924
NAS1831A4C36: RNCC: 3 | RNVC: 1
NAS1831: RNCC: 3 | RNVC: 1
A4C36: RNCC: 3 | RNVC: 2
G398-18: RNCC: 5 | RNVC: 9

30 Aug 1985

5340-01-206-5374
Spacing Threaded Standoff

012065374
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C08: RNCC: 3 | RNVC: 2

19 Apr 1985

5340-01-309-4245
Electrical-Mechanical Equipment Post

013094245
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C22: RNCC: 3 | RNVC: 2
A-3920-632-1: RNCC: 5 | RNVC: 2

18 Oct 1989

5340-01-255-1660
Retaining Strap

012551660
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D22-46N: RNCC: 3 | RNVC: 2
10383942: RNCC: 6 | RNVC: 9

15 May 1987

5340-01-317-5408
Electrical-Mechanical Equipment Post

013175408
NAS1829: RNCC: 3 | RNVC: 1
NAS1829-3A08: RNCC: 3 | RNVC: 2

31 Mar 1990

5340-01-309-4373
Loop Clamp

013094373
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D5-9N: RNCC: 3 | RNVC: 2
10113131: RNCC: 6 | RNVC: 9

18 Oct 1989

5340-01-320-8559
Electrical-Mechanical Equipment Post

013208559
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C44: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-01-255-1425
Turnbuckle Body

012551425
MS21251-A10L: RNCC: 2 | RNVC: 2
MS21251A10L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

15 May 1987

5340-01-055-4201
Butt Hinge

010554201
AA55589-9C: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-9C: RNCC: 5 | RNVC: 1

4 Feb 1978

5340-01-183-8566
Electrical-Mechanical Equipment Post

011838566
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A07: RNCC: 3 | RNVC: 2

11 Jul 1984

5340-01-163-9459
Spring Tension Clip

011639459
5P7468: RNCC: 3 | RNVC: 2
5P-7468: RNCC: 5 | RNVC: 2

10 Oct 1983

5340-01-142-4469
Loop Clamp

011424469
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCH6: RNCC: 3 | RNVC: 2
AS21919WCH6: RNCC: 3 | RNVC: 9
AS21919WCH6: RNCC: 5 | RNVC: 2
09A067WD06R: RNCC: 5 | RNVC: 2
JM44LC336WD6R: RNCC: 5 | RNVC: 2
815WD6R: RNCC: 5 | RNVC: 2
TA025035WDC06HW: RNCC: 5 | RNVC: 2
M23190/2-6A: RNCC: 5 | RNVC: 2
MIL-S-23190/2: RNCC: 5 | RNVC: 9

16 Nov 1982

5340-01-154-7249
Dust And Moisture Seal Protective Plug

011547249
NAS838: RNCC: 3 | RNVC: 1
NAS838-5: RNCC: 3 | RNVC: 2
NAS847: RNCC: 5 | RNVC: 1
M5501/2-R5: RNCC: 5 | RNVC: 9
MIL-C-5501: RNCC: 5 | RNVC: 9

30 May 1983

5340-01-130-9416
Expansion Plug

011309416
SAE-AS9380: RNCC: 3 | RNVC: 1
MS9380-04: RNCC: 3 | RNVC: 2
MS9380-04: RNCC: 5 | RNVC: 9
10112573: RNCC: 6 | RNVC: 9

30 Apr 1982

5340-01-033-8300
Spring Tension Clip

010338300
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B098-08C: RNCC: 3 | RNVC: 2

11 Jan 1977

5340-00-587-4175
Rod End Locking Retainer

005874175
NAS559: RNCC: 3 | RNVC: 1
NAS559-2: RNCC: 3 | RNVC: 2
752 365: RNCC: 5 | RNVC: 9
5342PL0835488: RNCC: 6 | RNVC: 9
NAS0559: RNCC: D | RNVC: 9

1 Jan 1961

5340-00-310-2142
Bow Handle

003102142
FFH111-1269: RNCC: 2 | RNVC: 2
FF-H-111: RNCC: 4 | RNVC: 1
FFH00111TYPE1269: RNCC: 5 | RNVC: 9
01698 1-2: RNCC: C | RNVC: 1

1 Jan 1961

5340-00-587-4173
Rod End Locking Retainer

005874173
NAS559: RNCC: 3 | RNVC: 1
NAS559-1: RNCC: 3 | RNVC: 2
754-550: RNCC: 5 | RNVC: 2
5340PL0845469: RNCC: 6 | RNVC: 9

1 Jan 1961

5340-00-514-1339
Angle Bracket

005141339
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743Z13: RNCC: 3 | RNVC: 2
9033591: RNCC: 5 | RNVC: 1
AN743Z13: RNCC: 5 | RNVC: 9
10117382: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-630-8884
Clamp Bolt Assembly

006308884
NAS573: RNCC: 3 | RNVC: 1
NAS573-3P: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-01-710-7353
Mounting Bracket

017107353
A1-55248D: RNCC: 3 | RNVC: 2

21 Jun 2023

5340-01-710-7305
Plug Button

017107305
9M862C10-2: RNCC: 3 | RNVC: 2
9M862C10-2: RNCC: 5 | RNVC: 2
9M862: RNCC: D | RNVC: 9

21 Jun 2023

5340-01-412-9706
Butt Hinge

014129706
MS20001-5-700: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

3 May 1995

5340-01-131-3132
Loop Clamp

011313132
M85052/1-16: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
JM44LC70WPH16YN: RNCC: 5 | RNVC: 1
1444PHW16Y: RNCC: 5 | RNVC: 1
M85052-1-16: RNCC: 5 | RNVC: 1
SS7563-16NBC: RNCC: 5 | RNVC: 9
MIL-C-85052/1: RNCC: 5 | RNVC: 9
10112580: RNCC: 6 | RNVC: 9
JM44LC70WPH16YH: RNCC: C | RNVC: 1
S664HT16: RNCC: C | RNVC: 1

7 May 1982

5340-00-662-9788
Spring Tension Clip

006629788
393-1003P3: RNCC: 3 | RNVC: 2
S343-1003P3ISSUE7: RNCC: 3 | RNVC: 2
6040168: RNCC: 3 | RNVC: 2
343-1003P3: RNCC: 3 | RNVC: 2
518A20-3: RNCC: 3 | RNVC: 2
343-1003P3: RNCC: 3 | RNVC: 2
919101-3: RNCC: 5 | RNVC: 2
7004433P3: RNCC: 5 | RNVC: 2
9073253: RNCC: 5 | RNVC: 2
FC10027-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-462-4244
Loop Clamp

004624244
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F18: RNCC: 3 | RNVC: 2
MS25281F18: RNCC: 5 | RNVC: 9
MS25281-F18: RNCC: C | RNVC: 1
MS25281-18: RNCC: C | RNVC: 1
401-6357200-73: RNCC: C | RNVC: 1

14 May 1969

5340-01-710-7647
Mounting Bracket

017107647
12640157: RNCC: 3 | RNVC: 2
12640157: RNCC: C | RNVC: 1

23 Jun 2023

5340-01-710-7973
Loop Clamp

017107973
COL-1011SS: RNCC: 3 | RNVC: 2
17-61378-02: RNCC: 7 | RNVC: 2
17-61378: RNCC: D | RNVC: 9

26 Jun 2023

5340-01-710-7907
Rigid Connecting Link

017107907
12640141: RNCC: 3 | RNVC: 2
12640141: RNCC: 5 | RNVC: 2

26 Jun 2023

5340-01-710-9248
Multiple Angle Bracket

017109248
2927M95G01: RNCC: 3 | RNVC: 2
2927M95: RNCC: D | RNVC: 9

10 Jul 2023

5340-01-710-8576
Double Angle Bracket

017108576
12641538: RNCC: 3 | RNVC: 2
12641538: RNCC: C | RNVC: 1

30 Jun 2023

5340-01-710-8363
Block Clamp

017108363
8592609-210: RNCC: 3 | RNVC: 2
8592643-FIND 25: RNCC: C | RNVC: 1
8592643: RNCC: D | RNVC: 9

28 Jun 2023

5340-01-710-8321
Spacing Threaded Standoff

017108321
8703-A-1032-1A: RNCC: 3 | RNVC: 2
PL70450-21070: RNCC: 5 | RNVC: 2

28 Jun 2023

5340-01-710-7703
Mechanical Stop

017107703
803-7286468-ITEM-10: RNCC: 3 | RNVC: 2
2633-326-02-ITEM10: RNCC: C | RNVC: 1
7286468: RNCC: D | RNVC: 9

23 Jun 2023

5340-01-331-7950
Electrical-Mechanical Equipment Post

013317950
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D48: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-01-309-7851
Loop Clamp

013097851
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D3-7TW: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-01-335-8195
Loop Clamp

013358195
MS21122C20: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

14 Mar 1991

5340-01-283-9948
Clamp Bolt Assembly

012839948
M85731/1-4: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
4029609-4: RNCC: 5 | RNVC: 1
MIL-F-85731/1-4C: RNCC: 5 | RNVC: 1
MS14108-4: RNCC: 5 | RNVC: 1
868951-1: RNCC: 5 | RNVC: 9
MS27600-3: RNCC: 5 | RNVC: 9
MIL-F-85731/1: RNCC: 5 | RNVC: 9
5340PL0855913: RNCC: 6 | RNVC: 9
5340PL1715885: RNCC: 6 | RNVC: 9

17 Aug 1988

5340-01-143-6780
Loop Clamp

011436780
NAS1714: RNCC: 3 | RNVC: 1
NAS1714CT2-2T: RNCC: 3 | RNVC: 2

7 Dec 1982

5340-01-143-6828
Rod End Clevis

011436828
MS21252-4LS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

7 Dec 1982

5340-00-663-1957
Loop Clamp

006631957
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C22N: RNCC: 3 | RNVC: 2
MS9024-21: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-401-1905
Manual Control Handle

004011905
NAS1637: RNCC: 3 | RNVC: 1
NAS1637-5P: RNCC: 3 | RNVC: 2
61L14-2-2AC: RNCC: 5 | RNVC: 2

19 Nov 1969

5340-01-711-0025
Access Cover

017110025
8668264-010: RNCC: 3 | RNVC: 2
565-8668264: RNCC: D | RNVC: 9

13 Jul 2023

5340-01-710-9688
Angle Bracket

017109688
8668264-020: RNCC: 3 | RNVC: 2
565-8668264: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-9554
Retaining Bail

017109554
12532085: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-710-9543
Engine Accessory Bracket

017109543
4322292-30: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-298-3215
Loop Clamp

012983215
NASM21322: RNCC: 3 | RNVC: 1
MS21322-25: RNCC: 3 | RNVC: 2
MS21322-25: RNCC: 5 | RNVC: 9

14 Apr 1989

5340-01-380-7933
Retaining Strap

013807933
NASM85449/1: RNCC: 3 | RNVC: 1
NASM85449/1-16: RNCC: 3 | RNVC: 2
M85449/1-16: RNCC: 5 | RNVC: 9

28 Sep 1993

5340-01-379-7030
Butt Hinge Leaf

013797030
MS20001Y12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

7 Sep 1993

5340-01-378-5989
Clamp Bolt Assembly

013785989
M85731/1-6: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
500171: RNCC: 5 | RNVC: 1
ST9M454-4-2: RNCC: 5 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
500017: RNCC: 5 | RNVC: 9
MS14108-6: RNCC: 5 | RNVC: 9

21 Aug 1993

5340-01-336-7792
Loop Clamp

013367792
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P5DB: RNCC: 3 | RNVC: 2
G5340013311389: RNCC: 5 | RNVC: 2
NAS1397P5DB: RNCC: 5 | RNVC: 2

3 Apr 1991

5340-01-434-2392
Dust And Moisture Seal Protective Cap

014342392
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-1390: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-1390: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-382-7678
Bow Handle

013827678
9M215C0600: RNCC: 3 | RNVC: 2
9M215C0600: RNCC: 3 | RNVC: 2
9M215C0600: RNCC: 3 | RNVC: 2
9M215C0600: RNCC: 3 | RNVC: 2
8112-6.000-1032-SS-12: RNCC: 3 | RNVC: 2
9M215C0600: RNCC: 5 | RNVC: 2
S6600Y-S041-21: RNCC: 5 | RNVC: 2
9M215C0600: RNCC: 5 | RNVC: 2
SS-3062-1032-00: RNCC: 5 | RNVC: 2
25R5-10C096C4: RNCC: 5 | RNVC: 2

9 Nov 1993

5340-01-414-6491
Loop Clamp

014146491
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P3DN: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-01-292-4519
Spacing Threaded Standoff

012924519
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B08: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-01-250-9131
Spacing Threaded Standoff

012509131
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3A11: RNCC: 3 | RNVC: 2
623-1389-002: RNCC: E | RNVC: 8
540-9061-003: RNCC: E | RNVC: 8

9 Mar 1987

5340-01-285-2885
Loop Clamp

012852885
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C30KH: RNCC: 3 | RNVC: 2
MS9350-29: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-01-284-2988
Electrical-Mechanical Equipment Post

012842988
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6D32: RNCC: 3 | RNVC: 2

22 Aug 1988

5340-01-234-2904
Electrical-Mechanical Equipment Post

012342904
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E40: RNCC: 3 | RNVC: 2
8595-SS-1032: RNCC: C | RNVC: 1

13 Jun 1986

5340-01-223-7943
Electrical-Mechanical Equipment Post

012237943
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C6J12: RNCC: 3 | RNVC: 2
NAS1829C6V12: RNCC: C | RNVC: 1

6 Jan 1986

5340-01-223-7940
Electrical-Mechanical Equipment Post

012237940
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E22: RNCC: 3 | RNVC: 2

6 Jan 1986

5340-01-227-1583
Rod End Locking Retainer

012271583
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K20C: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-01-232-6820
Electrical-Mechanical Equipment Post

012326820
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3B13: RNCC: 3 | RNVC: 2

19 May 1986

5340-01-230-1847
Access Cover

012301847
DP-5-W3-N: RNCC: 3 | RNVC: 2
1475160: RNCC: 5 | RNVC: 2
DP-5: RNCC: 5 | RNVC: 9
1475160: RNCC: 7 | RNVC: 9

10 Apr 1986

5340-01-229-7754
Electrical-Mechanical Equipment Post

012297754
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D12: RNCC: 3 | RNVC: 2
70-805281-1: RNCC: C | RNVC: 1
NAS1786C08-12: RNCC: E | RNVC: 8

6 Apr 1986

5340-00-838-1591
Rod End Clevis

008381591
NASM27975: RNCC: 3 | RNVC: 1
MS27975-4: RNCC: 3 | RNVC: 2
454901: RNCC: 5 | RNVC: 2
AN486-4: RNCC: 5 | RNVC: 2
MS27975-4: RNCC: 5 | RNVC: 9
6505-1495411PC29: RNCC: 5 | RNVC: 9
XT35948PC29: RNCC: 5 | RNVC: 9
7341438: RNCC: C | RNVC: 1
525923: RNCC: C | RNVC: 1
8679556: RNCC: C | RNVC: 1

14 Dec 1966

5340-00-906-4675
Support Hook

009064675
NAS622: RNCC: 3 | RNVC: 1
NAS622E2: RNCC: 3 | RNVC: 2
NAS622-E2: RNCC: 3 | RNVC: 2
SL1243E2: RNCC: 5 | RNVC: 2

1 Jan 1960

5340-00-902-0397
Loop Clamp

009020397
NASM21322: RNCC: 3 | RNVC: 1
MS21322-7: RNCC: 3 | RNVC: 2
MS21322-7: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-899-4454
Butt Hinge Leaf

008994454
MS20001PH3-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PH3-7200: RNCC: 5 | RNVC: 1
MS20001H3-0900: RNCC: 5 | RNVC: 9
MS20001PY3-150: RNCC: 5 | RNVC: 9
MS20001PY3-4036: RNCC: 5 | RNVC: 9
MS20001PY3-3200: RNCC: 5 | RNVC: 9
MS20001PX3-200: RNCC: 5 | RNVC: 9
916752-11: RNCC: C | RNVC: 1

8 Feb 1967

5340-01-031-7057
Loop Clamp

010317057
MS21122-32: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
TA4C99D32T: RNCC: 5 | RNVC: 1
8026-D-T32: RNCC: 5 | RNVC: 9
5340PL0846474: RNCC: 6 | RNVC: 9

30 Nov 1976

5340-00-755-0604
Dust And Moisture Seal Protective Cap

007550604
025-0487-000: RNCC: 3 | RNVC: 2
487: RNCC: 5 | RNVC: 1
907223-09: RNCC: 5 | RNVC: 2
907223-09: RNCC: 5 | RNVC: 2
025-0487-000: RNCC: 5 | RNVC: 2
70086863: RNCC: 5 | RNVC: 2
831537-00: RNCC: 5 | RNVC: 9
025-0487-00: RNCC: 5 | RNVC: 9
025-0487-000: RNCC: C | RNVC: 1
10-70506-24: RNCC: C | RNVC: 1

1 Jan 1960

5340-01-072-1361
Spring Tension Clip

010721361
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-104: RNCC: 3 | RNVC: 2
M24066-4-104: RNCC: 5 | RNVC: 9
NASM24066/4-104: RNCC: 5 | RNVC: 9
MIL-C-24066/4: RNCC: 5 | RNVC: 9
MS28137-4: RNCC: 5 | RNVC: 9
10117588: RNCC: 6 | RNVC: 9

23 Feb 1979

5340-00-804-1245
Dust And Moisture Seal Protective Plug

008041245
NAS836: RNCC: 3 | RNVC: 1
NAS836-16A: RNCC: 3 | RNVC: 2
M5501/1-16: RNCC: 5 | RNVC: 9
ASP-16: RNCC: 5 | RNVC: 9
MILC5501TYPE3CLASSASIZE16: RNCC: 5 | RNVC: 9
5340PL1450710: RNCC: 6 | RNVC: 9
10117453: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-01-019-2981
Spring Tension Clip

010192981
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-146: RNCC: 3 | RNVC: 2
16412246: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
6023-2A: RNCC: 5 | RNVC: 9
M24066/2-146: RNCC: 5 | RNVC: 9
16412246: RNCC: 5 | RNVC: 9

14 Apr 1976

5340-00-664-4541
Threaded Rod End

006644541
AN490HT8P: RNCC: 3 | RNVC: 2
AN490HT8P: RNCC: 3 | RNVC: 9
MIL-DTL-45918: RNCC: 4 | RNVC: 1
AN490HT8P: RNCC: 5 | RNVC: 2
AN490-8P: RNCC: 5 | RNVC: 9
AN490HT8P: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-727-4774
Dust And Moisture Seal Protective Cap

007274774
NAS832: RNCC: 3 | RNVC: 1
NAS832-5: RNCC: 3 | RNVC: 2
95208-3: RNCC: 5 | RNVC: 2
CD5: RNCC: 5 | RNVC: 2
CD5: RNCC: 5 | RNVC: 2
TC-4: RNCC: 5 | RNVC: 2
G-5: RNCC: 5 | RNVC: 2
CD5: RNCC: 5 | RNVC: 9
M5501/11-F5: RNCC: 5 | RNVC: 9
CD5: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-804-1241
Dust And Moisture Seal Protective Plug

008041241
NAS847: RNCC: 3 | RNVC: 1
NAS842-8A: RNCC: 3 | RNVC: 2
M5501/2-8: RNCC: 5 | RNVC: 9
MIL-C-5501/2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-019-2658
Loop Clamp

010192658
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122920: RNCC: 3 | RNVC: 2
MS122920: RNCC: 5 | RNVC: 9
5340PL1242409: RNCC: 6 | RNVC: 9

14 Apr 1976

5340-00-725-5279
Loop Clamp

007255279
NASM21333: RNCC: 3 | RNVC: 1
MS21333-50: RNCC: 3 | RNVC: 2
NASM21333-50: RNCC: 5 | RNVC: 1
5340007255279: RNCC: 5 | RNVC: 9
MS21333-50: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-988-2135
Loop Clamp

009882135
NASM21322: RNCC: 3 | RNVC: 1
MS21322-4: RNCC: 3 | RNVC: 2
MS21322-4: RNCC: 5 | RNVC: 9

4 Nov 1966

5340-00-916-6533
Tied0wn *

009166533
NAS1382: RNCC: 3 | RNVC: 1
NAS1382-7: RNCC: 3 | RNVC: 2

13 Jul 1966

5340-01-020-7076
Retaining Strap

010207076
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D7-13N: RNCC: 3 | RNVC: 2

3 May 1976

5340-01-019-1968
Rod End Locking Retainer

010191968
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K10CP: RNCC: 3 | RNVC: 2
NAS1193K10CP: RNCC: 5 | RNVC: 2
NAS1193K10CP: RNCC: 5 | RNVC: 2
NAS1193K10CP: RNCC: 5 | RNVC: 2
NAS1193K10CP: RNCC: 5 | RNVC: 2

14 Apr 1976

5340-00-915-8115
Angle Bracket

009158115
MS9101-12: RNCC: 2 | RNVC: 2
MS9101: RNCC: 4 | RNVC: 1

26 Jan 1966

5340-00-915-4827
Spring Tension Clip

009154827
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-062-08C: RNCC: 3 | RNVC: 2

13 Jul 1966

5340-01-017-6795
Access Cover

010176795
11684220: RNCC: 3 | RNVC: 2
5940010176795: RNCC: 5 | RNVC: 9
5940010176795: RNCC: 6 | RNVC: 9
5340010176795: RNCC: 6 | RNVC: 9

12 Mar 1976

5340-00-188-0283
Turnbuckle

001880283
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 1/2X6: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-00-152-8320
Spring Loaded Cylinder Fastener

001528320
4761076: RNCC: 3 | RNVC: 2
7-360M3: RNCC: 5 | RNVC: 2
7-614644: RNCC: 5 | RNVC: 2
C2052: RNCC: 5 | RNVC: 9
CP10170: RNCC: 5 | RNVC: 9
750005: RNCC: 5 | RNVC: 9
750006: RNCC: 5 | RNVC: 9
7-614644: RNCC: 5 | RNVC: 9
360M3: RNCC: 5 | RNVC: 9
614644: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-421-8405
Loop Clamp

014218405
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P8DN: RNCC: 3 | RNVC: 2

16 Nov 1995

5340-01-422-2698
Loop Clamp

014222698
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7Z: RNCC: 3 | RNVC: 2

28 Nov 1995

5340-01-340-4912
Retaining Strap

013404912
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C18W36N: RNCC: 3 | RNVC: 2

13 Jun 1991

5340-01-456-2234
Loop Clamp

014562234
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C13-7S: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-01-358-5678
Expansion Plug

013585678
SAE-AS3123: RNCC: 3 | RNVC: 1
AS3123-59: RNCC: 3 | RNVC: 2
AS3123-59: RNCC: 5 | RNVC: 9
AS3123-59: RNCC: 5 | RNVC: 9
PLGA4165010: RNCC: 5 | RNVC: 9

16 May 1992

5340-01-253-4506
Loop Clamp

012534506
MS9351-03: RNCC: 2 | RNVC: 2
MS9351: RNCC: 4 | RNVC: 1

18 Apr 1987

5340-01-304-4557
Mounting Bracket

013044557
92094-991: RNCC: 3 | RNVC: 9
353 8091-001: RNCC: 5 | RNVC: 2
101012001005A: RNCC: 5 | RNVC: 2
353 8091-001: RNCC: 5 | RNVC: 2
HE012296: RNCC: 5 | RNVC: 2
012296: RNCC: 5 | RNVC: 2
101012001005A: RNCC: 5 | RNVC: 9
353 8091-001: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-01-188-5211
Grooved Clamp Coupling

011885211
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-03B: RNCC: 3 | RNVC: 2
MS27114-03B: RNCC: 5 | RNVC: 9
MIL-DTL-27536C NOT 1: RNCC: 5 | RNVC: 9
AS5355: RNCC: 5 | RNVC: 9
AS5355/1-03B: RNCC: 5 | RNVC: 9
AS5355: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-01-188-5054
Spring Tension Clip

011885054
6K4935: RNCC: 3 | RNVC: 2
6K-4935: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-01-201-5824
Spacing Threaded Standoff

012015824
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B06: RNCC: 3 | RNVC: 2

20 Feb 1985

5340-01-266-0261
Electrical-Mechanical Equipment Post

012660261
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B3B22: RNCC: 3 | RNVC: 2
NAS183183B22: RNCC: C | RNVC: 1

20 Oct 1987

5340-00-762-9998
Loop Clamp

007629998
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C10ZH: RNCC: 3 | RNVC: 2
MS9826-09: RNCC: 5 | RNVC: 1

18 Apr 1972

5340-00-811-4995
Angle Bracket

008114995
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743C12: RNCC: 3 | RNVC: 2
AN743C-12: RNCC: 3 | RNVC: 2
AN743C12: RNCC: 3 | RNVC: 9
C008114995: RNCC: 5 | RNVC: 2
AN743C12: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-937-2861
Rod End Locking Retainer

009372861
NAS1193: RNCC: 3 | RNVC: 1
NAS1193-8C: RNCC: 3 | RNVC: 2

2 Dec 1966

5340-00-990-1431
Clamp Bolt Assembly

009901431
NAS573: RNCC: 3 | RNVC: 1
NAS573-3: RNCC: 3 | RNVC: 2
127-0032-004: RNCC: 5 | RNVC: 9
418670-3: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-934-9985
Loop Clamp

009349985
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D52: RNCC: 3 | RNVC: 2
AN735D52: RNCC: 3 | RNVC: 9
AN735D52: RNCC: 5 | RNVC: 9

8 Mar 1967

5340-00-934-9831
Retaining Strap

009349831
NAS1711: RNCC: 3 | RNVC: 1
TA516D12-23: RNCC: 3 | RNVC: 2
NAS1711D12-23N: RNCC: 3 | RNVC: 2
S133D12-23G: RNCC: 5 | RNVC: 9

8 Mar 1967

5340-00-934-0085
Expansion Plug

009340085
A52420-04: RNCC: 2 | RNVC: 2
A-A-52420: RNCC: 4 | RNVC: 1
9419572: RNCC: 5 | RNVC: 9
9419572: RNCC: 5 | RNVC: 9

24 Feb 1967

5340-01-081-9744
Loop Clamp

010819744
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-16N: RNCC: 3 | RNVC: 2
10117600: RNCC: 6 | RNVC: 9

23 Aug 1979

5340-01-081-8282
Dust And Moisture Seal Protective Cap

010818282
NAS835: RNCC: 3 | RNVC: 1
NAS835-4A: RNCC: 3 | RNVC: 2
MIL-C-5501/3: RNCC: 5 | RNVC: 9
M5501/3-4: RNCC: 5 | RNVC: 9
ASC-4: RNCC: 5 | RNVC: 9
910338-4: RNCC: 5 | RNVC: 9
5340PL1452736: RNCC: 6 | RNVC: 9
10117599: RNCC: 6 | RNVC: 9

20 Aug 1979

5340-00-807-1065
Loop Clamp

008071065
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R16: RNCC: 3 | RNVC: 2
MS25281-R16: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
MS25281-R16: RNCC: 5 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 9
MS25281R16: RNCC: 5 | RNVC: 9
5340008071065: RNCC: 5 | RNVC: 9
10117455: RNCC: 6 | RNVC: 9
MS25281-R16: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-664-8140
Butt Hinge

006648140
MS20001P3-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
4240700-2: RNCC: 5 | RNVC: 1
MS20001P3-7200: RNCC: 5 | RNVC: 1
MS20001-3-1280: RNCC: 5 | RNVC: 9
MS20001-3-1800: RNCC: 5 | RNVC: 9
MS20001-3-7200: RNCC: 5 | RNVC: 9
MS20001-3: RNCC: 5 | RNVC: 9
5340PL0734763: RNCC: 6 | RNVC: 9
2075-0046-01: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-200-6534
Loop Clamp

002006534
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-25: RNCC: 3 | RNVC: 2
AN735-25: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-365-3635
Angle Bracket

013653635
M16377/27-003: RNCC: 2 | RNVC: 2
MIL-DTL-16377/27: RNCC: 4 | RNVC: 1
MIL-F-16377/27: RNCC: 5 | RNVC: 9

6 Oct 1992

5340-01-355-5476
Loop Clamp

013555476
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D28-16N: RNCC: 3 | RNVC: 2
10113213: RNCC: 6 | RNVC: 9

19 Mar 1992

5340-01-364-1984
Loop Clamp

013641984
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-42N: RNCC: 3 | RNVC: 2
10113218: RNCC: 6 | RNVC: 9

14 Sep 1992

5340-01-411-5789
Angle Bracket

014115789
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-112: RNCC: 3 | RNVC: 2
MS9601-112: RNCC: 5 | RNVC: 9

28 Mar 1995

5340-01-391-7644
Angle Bracket

013917644
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-376: RNCC: 3 | RNVC: 2
MS9592-376: RNCC: 5 | RNVC: 9

16 Jun 1994

5340-01-449-6994
Retaining Strap

014496994
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C23W44N: RNCC: 3 | RNVC: 2

10 Oct 1997

5340-01-276-2022
Electrical-Mechanical Equipment Post

012762022
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C15: RNCC: 3 | RNVC: 2
NAS1831-4C15: RNCC: C | RNVC: 1

5 Apr 1988

5340-01-193-6684
Electrical-Mechanical Equipment Post

011936684
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C48: RNCC: 3 | RNVC: 2
948515-4648: RNCC: C | RNVC: 1

6 Nov 1984

5340-01-205-3560
Angle Bracket

012053560
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-490: RNCC: 3 | RNVC: 2
MS9593-490: RNCC: 5 | RNVC: 9

7 Apr 1985

5340-01-258-0342
Grooved Clamp Coupling

012580342
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-04R: RNCC: 3 | RNVC: 2
AS5355/1: RNCC: 5 | RNVC: 1
AS5355/1-04R: RNCC: 5 | RNVC: 9
MS27114-04R: RNCC: 5 | RNVC: 9

26 Jun 1987

5340-01-272-9274
Spring Tension Clip

012729274
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-051-10C: RNCC: 3 | RNVC: 2

17 Feb 1988

5340-01-204-4929
Bow Handle

012044929
NASM39087: RNCC: 3 | RNVC: 1
MS39087-404AN: RNCC: 3 | RNVC: 2
MS39087-404AN: RNCC: 5 | RNVC: 9
MS39087-202AN: RNCC: 5 | RNVC: 9

27 Mar 1985

5340-01-274-2997
Butt Hinge Leaf

012742997
MS20001PH9-450: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
70207-22228-133: RNCC: 5 | RNVC: 1

7 Mar 1988

5340-01-204-7115
Electrical-Mechanical Equipment Post

012047115
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C22: RNCC: 3 | RNVC: 2
NAS1786C06-22: RNCC: C | RNVC: 1

29 Mar 1985

5340-01-189-6749
Spring Tension Clip

011896749
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-03408C: RNCC: 3 | RNVC: 2

18 Sep 1984

5340-01-213-4399
Loop Clamp

012134399
AA52406-7: RNCC: 2 | RNVC: 2
A-A-52406: RNCC: 4 | RNVC: 1
AA52406-7: RNCC: 5 | RNVC: 9
A-A-52406A: RNCC: 5 | RNVC: 9
MS52150-7SA: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-01-314-4020
Loop Clamp

013144020
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D4-6N: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-00-680-8788
Mortise Lock Set

006808788
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F75 GRADE 1: RNCC: 3 | RNVC: 2
ANSI A156.2 F75 GRADE 1: RNCC: 5 | RNVC: 9
FFH106TYPE161N: RNCC: 5 | RNVC: 9
D10S: RNCC: 5 | RNVC: 9
836-410: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-099-8156
Spring Tension Clip

010998156
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B032-05N: RNCC: 3 | RNVC: 2
NAS1464B-032-05 N: RNCC: C | RNVC: 1

23 Aug 1980

5340-01-106-4377
Webbing Strap

011064377
NAS1385: RNCC: 3 | RNVC: 1
NAS1385C88P: RNCC: 3 | RNVC: 2

17 Jan 1981

5340-01-046-3690
Loop Clamp

010463690
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C40TW: RNCC: 3 | RNVC: 2

15 Aug 1977

5340-01-090-8911
Dust And Moisture Seal Protective Cap

010908911
NAS847: RNCC: 3 | RNVC: 1
NAS844-23: RNCC: 3 | RNVC: 2
MIL-C-5501/9: RNCC: 5 | RNVC: 9
M5501/9-F26: RNCC: 5 | RNVC: 9

26 Feb 1980

5340-01-045-6986
Bow Handle

010456986
SS6: RNCC: 3 | RNVC: 2
A5557-9: RNCC: 3 | RNVC: 2
10325-SS-1032-7: RNCC: 3 | RNVC: 2
MS39087-310CP: RNCC: 5 | RNVC: 9
5041-13: RNCC: 5 | RNVC: 9
SS-S5126-1: RNCC: 5 | RNVC: 9
ES-3323-9-1: RNCC: 5 | RNVC: 9
10352-SS-1032-7: RNCC: 5 | RNVC: 9
TE-11000-5-9: RNCC: 5 | RNVC: 9
752759-9: RNCC: 7 | RNVC: 2

7 Aug 1977

5340-00-685-0557
Loop Clamp

006850557
SAE AS122900 THRU AS122939: RNCC: 3 | RNVC: 1
MS122911: RNCC: 3 | RNVC: 2
MS122911: RNCC: 5 | RNVC: 1
MS122911: RNCC: 5 | RNVC: 9
5340PL0926115: RNCC: 6 | RNVC: 9
MS1229-11: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-045-5474
Loop Clamp

010455474
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D3K: RNCC: 3 | RNVC: 2
5340PL1058460: RNCC: 6 | RNVC: 9

3 Aug 1977

5340-00-684-9956
Rim Latch Set

006849956
333-508-9001: RNCC: 3 | RNVC: 2
9175050: RNCC: 3 | RNVC: 2
21C1532-049: RNCC: 5 | RNVC: 2
00295-0065: RNCC: 5 | RNVC: 2
21C1596-12: RNCC: 5 | RNVC: 2
713499-037: RNCC: 5 | RNVC: 2
713499-37: RNCC: 5 | RNVC: 2
00295-0065: RNCC: 5 | RNVC: 9
SMC211114-1: RNCC: 5 | RNVC: 9
295-0065: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-682-1508
Padlock

006821508
A-A-59487-1BC: RNCC: 2 | RNVC: 2
AA59487-1BC: RNCC: 2 | RNVC: 2
A-A-59487: RNCC: 4 | RNVC: 1
SMD555531-1: RNCC: 5 | RNVC: 1
FF-P-101 TYEW: RNCC: 5 | RNVC: 1
10133809: RNCC: 5 | RNVC: 1
FF-P-101: RNCC: 5 | RNVC: 9
7741-2B: RNCC: 5 | RNVC: 9
MS35647-3: RNCC: 5 | RNVC: 9
5340006821508: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-820-6059
Loop Clamp

008206059
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R26: RNCC: 3 | RNVC: 2
MS25281R26: RNCC: 3 | RNVC: 2
MS25281R26: RNCC: 3 | RNVC: 9
MS25281R26: RNCC: 5 | RNVC: 9
MS25281-R26: RNCC: C | RNVC: 1

1 Jan 1960

5340-01-044-2675
Dust And Moisture Seal Protective Cap

010442675
NAS847: RNCC: 3 | RNVC: 1
NAS844-13: RNCC: 3 | RNVC: 2
831554-00: RNCC: 5 | RNVC: 9
MIL-C-5501/9: RNCC: 5 | RNVC: 9
M5501/9-F13: RNCC: 5 | RNVC: 9

9 Jul 1977

5340-00-949-3721
Loop Clamp

009493721
NASM21322: RNCC: 3 | RNVC: 1
MS21322-3: RNCC: 3 | RNVC: 2
NASM21322-3: RNCC: 5 | RNVC: 9
MS21322-3: RNCC: 5 | RNVC: 9
MS21322-3: RNCC: 5 | RNVC: 9
MS21322]3: RNCC: C | RNVC: 1

18 Apr 1966

5340-01-009-6858
Mending Plate

010096858
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-134: RNCC: 3 | RNVC: 2
MS9552-134: RNCC: 5 | RNVC: 9
5340PL0886185: RNCC: 6 | RNVC: 9

14 Sep 1975

5340-00-948-9782
Spring Tension Clip

009489782
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-040-06C: RNCC: 3 | RNVC: 2

15 Apr 1966

5340-01-007-4982
Loop Clamp

010074982
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D10KW: RNCC: 3 | RNVC: 2

5 Aug 1975

NSN 5340-01-588-1954 015881954 PADLOCK SET

5340-01-588-1954
Padlock Set

015881954
AA59486-2AS06S0E2S: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
A-A-59487: RNCC: E | RNVC: 8
A-A-59487-2SS: RNCC: E | RNVC: 8

7 Sep 2010

5340-01-644-0169
Dust And Moisture Seal Protective Cap

016440169
1013577-001: RNCC: 3 | RNVC: 2
8000545: RNCC: 5 | RNVC: 2

20 Apr 2015

5340-01-452-7669
Loop Clamp

014527669
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-15N: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-01-418-6211
Loop Clamp

014186211
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C38Z: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-01-398-0320
Butt Hinge

013980320
MS20001P4-1290: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

23 Oct 1994

5340-01-431-1183
Loop Clamp

014311183
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C20-20N: RNCC: 3 | RNVC: 2

8 May 1996

Load More Results