What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 11 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 11 of 1045

5340-00-480-8780
Retaining Strap

004808780
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D15W40N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-269-4913
Manual Control Handle

002694913
10909338: RNCC: 3 | RNVC: 2
5340002694913: RNCC: 6 | RNVC: 9

8 Jan 1968

5340-01-656-0669
Evener Bar Assy

016560669
310T4022-3: RNCC: 3 | RNVC: 1
310T4022-1: RNCC: 5 | RNVC: 9

15 Jun 2016

5340-01-525-6401
Dust And Moisture Seal Protective Cap-Plug

015256401
11581544: RNCC: 3 | RNVC: 2
E1211156: RNCC: 5 | RNVC: 2
777.21.040: RNCC: 5 | RNVC: 2

18 Nov 2004

5340-01-223-7953
Electrical-Mechanical Equipment Post

012237953
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B4C04: RNCC: 3 | RNVC: 2
NAS1829B: RNCC: C | RNVC: 1
8216: RNCC: C | RNVC: 1

6 Jan 1986

5340-01-625-2009
Detent Plunger

016252009
11582683: RNCC: 3 | RNVC: 2
E1211160: RNCC: 5 | RNVC: 2
777.21.017: RNCC: 5 | RNVC: 2

28 Jan 2014

5340-01-185-7607
Rod End Clevis

011857607
069-2508: RNCC: 3 | RNVC: 2
692508: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-01-384-2525
Retaining Strap

013842525
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D32-32S: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-01-442-8139
Spacing Threaded Standoff

014428139
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E19: RNCC: 3 | RNVC: 2

25 Mar 1997

5340-01-710-6931
Mounting Plate

017106931
100021993: RNCC: 3 | RNVC: 2

16 Jun 2023

5340-01-417-2448
Synchro Clamp

014172448
5000-4: RNCC: 3 | RNVC: 2
193453202: RNCC: 5 | RNVC: 2
1650843-1: RNCC: 7 | RNVC: 2
1650843: RNCC: D | RNVC: 9

3 Aug 1995

5340-01-708-3009
Mounting Plate

017083009
62797-102: RNCC: 3 | RNVC: 2

28 Mar 2023

5340-01-705-7759
Loop Clamp

017057759
AS21919WDG29Y: RNCC: 3 | RNVC: 2
AS21919WDG29Y: RNCC: 5 | RNVC: 9

12 Oct 2022

5340-01-470-6725
Loop Clamp

014706725
NW33101: RNCC: 3 | RNVC: 2
P14-8338: RNCC: 5 | RNVC: 2
6004002630: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-01-705-3693
Mounting Bracket

017053693
NGB550FF0303: RNCC: 3 | RNVC: 2
NGB550FF0303: RNCC: 5 | RNVC: 2

16 Sep 2022

5340-01-705-3482
Utility Access Door

017053482
0201337: RNCC: 3 | RNVC: 2
11B5091173: RNCC: 7 | RNVC: 2

15 Sep 2022

5340-01-705-3234
Mounting Bracket

017053234
5262578: RNCC: 3 | RNVC: 2
8214968 FIND 43: RNCC: C | RNVC: 1
PL8214968-003: RNCC: D | RNVC: 9
8214968: RNCC: D | RNVC: 9

13 Sep 2022

5340-01-703-3883
Mounting Plate

017033883
11B5091827: RNCC: 3 | RNVC: 2

2 Sep 2022

5340-01-703-8110
Door Stop Chain

017038110
5-13-10520-2: RNCC: 3 | RNVC: 2
5-13-10520-2: RNCC: 5 | RNVC: 2
5-13-10520: RNCC: D | RNVC: 9

9 Sep 2022

5340-01-703-2764
Double Angle Bracket

017032764
018737-000: RNCC: 3 | RNVC: 1

26 Aug 2022

5340-01-703-2653
Mounting Bracket

017032653
8244517-1: RNCC: 3 | RNVC: 2
8244517: RNCC: D | RNVC: 9

26 Aug 2022

5340-01-703-2626
Mounting Bracket

017032626
204-60720-80: RNCC: 3 | RNVC: 2

25 Aug 2022

5340-01-703-2346
Mounting Plate

017032346
12580971-1: RNCC: 3 | RNVC: 2
12590971-1: RNCC: 5 | RNVC: 9
12580971: RNCC: D | RNVC: 9

24 Aug 2022

5340-01-703-1942
Manual Control Handle

017031942
600-500120-G001-2: RNCC: 3 | RNVC: 2
600-500120: RNCC: D | RNVC: 9

22 Aug 2022

5340-01-703-2014
Loop Clamp

017032014
094892-0001: RNCC: 3 | RNVC: 2

23 Aug 2022

5340-01-703-1686
Access Cover

017031686
521599-1: RNCC: 3 | RNVC: 2
521599: RNCC: D | RNVC: 9

22 Aug 2022

5340-01-703-1337
Access Cover

017031337
510478-2: RNCC: 3 | RNVC: 2
510478: RNCC: D | RNVC: 9

18 Aug 2022

5340-01-702-1445
Angle Bracket

017021445
12594459: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-701-1847
Retaining Strap

017011847
SRPV2200386-107: RNCC: 3 | RNVC: 2

3 May 2022

5340-01-698-4878
Nut And Bolt Retainer

016984878
BACR10AL3B: RNCC: 3 | RNVC: 2

19 Nov 2021

5340-01-698-9851
Utility Resilient Mount

016989851
8242697: RNCC: 3 | RNVC: 2

28 Dec 2021

5340-01-697-9538
Retaining Strap

016979538
25838261: RNCC: 3 | RNVC: 2

20 Oct 2021

5340-01-708-3609
Angle Bracket

017083609
383292-3: RNCC: 3 | RNVC: 2
383292: RNCC: D | RNVC: 9

31 Mar 2023

5340-01-708-4972
Webbing Strap

017084972
1000208931: RNCC: 3 | RNVC: 2
1000208931: RNCC: 7 | RNVC: 2

10 Apr 2023

5340-01-691-4182
Dust And Moisture Seal Protective Cap-Plug

016914182
NAS834: RNCC: 3 | RNVC: 1
NAS834-223: RNCC: 3 | RNVC: 2

8 Oct 2020

5340-01-586-9575
Loop Clamp

015869575
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C20KWH: RNCC: 3 | RNVC: 2

20 Jul 2010

5340-00-007-8773
Loop Clamp

000078773
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D20-16N: RNCC: 3 | RNVC: 2

19 Jul 1972

5340-01-701-8625
Access Cover

017018625
19-15-0604: RNCC: 3 | RNVC: 2

14 Jun 2022

5340-01-697-6434
Mounting Bracket

016976434
A27110-27: RNCC: 3 | RNVC: 2

1 Oct 2021

5340-01-708-6676
Detent Plunger

017086676
MC21096: RNCC: 3 | RNVC: 2

15 Apr 2023

5340-01-708-7736
Angle Bracket

017087736
12647388: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-708-4469
Nut And Bolt Retainer

017084469
FTR-1475-402-.280-SC: RNCC: 3 | RNVC: 2

6 Apr 2023

NSN 5340-01-588-1928 015881928 PADLOCK SET

5340-01-588-1928
Padlock Set

015881928
AA59486-2AS10S0E2S: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
A-A-59487-2SS: RNCC: E | RNVC: 8
A-A-59487: RNCC: E | RNVC: 8

7 Sep 2010

5340-00-587-1331
Plug Button

005871331
XS99522K1110: RNCC: 3 | RNVC: 2
1708C: RNCC: 5 | RNVC: 2
7331: RNCC: 5 | RNVC: 2
XS99522K1611: RNCC: 5 | RNVC: 9
7331: RNCC: 5 | RNVC: 9
7331: RNCC: 5 | RNVC: 9
2347: RNCC: 5 | RNVC: 9
XS99522: RNCC: 5 | RNVC: 9
XS99522: RNCC: 5 | RNVC: 9
41V: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-672-1546
Loop Clamp

016721546
NASM21333: RNCC: 3 | RNVC: 1
NASM21333-107: RNCC: 3 | RNVC: 2

23 Apr 2018

5340-01-467-9592
Loop Clamp

014679592
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C4KH: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-01-656-1302
Mounting Bracket

016561302
12629382: RNCC: 3 | RNVC: 2
12589979: RNCC: 5 | RNVC: 9
12595040: RNCC: D | RNVC: 9

17 Jun 2016

5340-01-530-6884
Retaining Strap

015306884
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D10W27N: RNCC: 3 | RNVC: 2
NAS1677D10W27: RNCC: 5 | RNVC: 9

8 Jun 2005

5340-01-702-0336
Retaining Band

017020336
6457246-200M1: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-322-4685
Electrical-Mechanical Equipment Post

013224685
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B4G14: RNCC: 3 | RNVC: 2

7 Jul 1990

5340-01-711-0010
Mounting Plate

017110010
LS1126150: RNCC: 3 | RNVC: 2

13 Jul 2023

5340-01-710-9530
Retaining Clip

017109530
4320713-09: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-710-8682
Engine Accessory Bracket

017108682
4322292-23: RNCC: 3 | RNVC: 2

4 Jul 2023

5340-01-710-8676
Retaining Clip

017108676
4322292-47: RNCC: 3 | RNVC: 2

4 Jul 2023

5340-01-710-8420
Electronic Equipment Hardware Kit

017108420
13076742: RNCC: 3 | RNVC: 2

29 Jun 2023

5340-01-710-9596
Suction Cup

017109596
010-12982-08: RNCC: 3 | RNVC: 2
010-12982-08: RNCC: 5 | RNVC: 2

11 Jul 2023

5340-01-710-9509
Suction Cup

017109509
010-11983-00: RNCC: 3 | RNVC: 2
010-11983-00: RNCC: 5 | RNVC: 2

11 Jul 2023

5340-01-710-8096
Bumper

017108096
9C3Z-4730-A: RNCC: 3 | RNVC: 2

27 Jun 2023

5340-01-644-0474
Dust And Moisture Seal Protective Cap

016440474
RVC9324-1 5-BLACK: RNCC: 3 | RNVC: 2
8000544: RNCC: 5 | RNVC: 2

21 Apr 2015

5340-01-128-4299
Spring Tension Clip

011284299
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-036-10C: RNCC: 3 | RNVC: 2
M24066/4-108: RNCC: 5 | RNVC: 9
MIL-C-24066/4: RNCC: 5 | RNVC: 9

20 Mar 1982

5340-01-243-1053
Electrical-Mechanical Equipment Post

012431053
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C15: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-00-297-6627
Buckle

002976627
MS51927-4: RNCC: 2 | RNVC: 2
MIL-B-543: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-287-8568
Electrical-Mechanical Equipment Post

012878568
NAS1830: RNCC: 3 | RNVC: 1
NAS1830A03B04: RNCC: 3 | RNVC: 2
9626BA0440-1B: RNCC: C | RNVC: 1

28 Oct 1988

5340-01-558-8473
Access Cover

015588473
3948083: RNCC: 3 | RNVC: 2
2 0128-039: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-01-298-7682
Strap Hinge Leaf

012987682
M85731/1-19C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1

22 Apr 1989

5340-01-526-0400
Body Assembly Plug

015260400
T-11: RNCC: 3 | RNVC: 2
13049746: RNCC: 5 | RNVC: 2
T-11: RNCC: 5 | RNVC: 2
AMP-02-03-25209: RNCC: 5 | RNVC: 2
192564: RNCC: 5 | RNVC: 2

4 Dec 2004

5340-01-711-0690
Access Cover

017110690
1710684: RNCC: 3 | RNVC: 2

18 Jul 2023

5340-01-711-0237
Handle Bar

017110237
LS1126148: RNCC: 3 | RNVC: 2

14 Jul 2023

5340-01-710-8683
Engine Accessory Bracket

017108683
4322292-78: RNCC: 3 | RNVC: 2

4 Jul 2023

5340-01-710-8681
Engine Accessory Bracket

017108681
4322292-15: RNCC: 3 | RNVC: 2

4 Jul 2023

5340-01-710-8387
Retaining Clip

017108387
BC3Z-8B365-J: RNCC: 3 | RNVC: 2
BC3Z-8B365-J: RNCC: 5 | RNVC: 2

29 Jun 2023

5340-01-710-8200
Mounting Plate

017108200
100020196: RNCC: 3 | RNVC: 2

28 Jun 2023

5340-01-710-8191
Utility Resilient Mount

017108191
94016-40: RNCC: 3 | RNVC: 2

27 Jun 2023

5340-01-710-7721
Mounting Plate

017107721
PL-S-3: RNCC: 3 | RNVC: 2

23 Jun 2023

5340-01-711-0749
Access Cover

017110749
39349: RNCC: 3 | RNVC: 2

19 Jul 2023

5340-01-710-8748
Mounting Plate

017108748
22-796595: RNCC: 3 | RNVC: 2

5 Jul 2023

5340-00-714-3113
Access Cover

007143113
4765164: RNCC: 3 | RNVC: 2
1455658: RNCC: 3 | RNVC: 2
6D0547: RNCC: 3 | RNVC: 2
3201957: RNCC: 5 | RNVC: 2
PC17814: RNCC: 5 | RNVC: 2
FC17814: RNCC: 5 | RNVC: 2
200084: RNCC: 5 | RNVC: 2
L33110: RNCC: 5 | RNVC: 2
F17814: RNCC: 5 | RNVC: 2
271456: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-01-504-7309
Manual Control Lever

015047309
28981ALEY: RNCC: 3 | RNVC: 2
26284AL: RNCC: 3 | RNVC: 9

6 Feb 2003

5340-01-523-5540
Loop Clamp

015235540
252-9046: RNCC: 3 | RNVC: 2
126-4224: RNCC: 5 | RNVC: 9

8 Sep 2004

5340-00-707-1099
Loop Clamp

007071099
7071099: RNCC: 3 | RNVC: 2
A3 280H1620: RNCC: 5 | RNVC: 2
A3 3280H1620: RNCC: 5 | RNVC: 2
A33280H1620: RNCC: 5 | RNVC: 2
53407071099: RNCC: 5 | RNVC: 9
9WA0585: RNCC: 5 | RNVC: 9
866D1: RNCC: 5 | RNVC: 9
801E1089: RNCC: 5 | RNVC: 9
A3280H1620: RNCC: 5 | RNVC: 9
671434: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-318-2156
Electrical-Mechanical Equipment Post

013182156
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C20: RNCC: 3 | RNVC: 2

14 Apr 1990

5340-01-502-8666
Mounting Bracket

015028666
12684491: RNCC: 3 | RNVC: 2
M311-2815: RNCC: 5 | RNVC: 9
M217-1813P11: RNCC: D | RNVC: 9

22 Nov 2002

5340-00-069-4933
Aviation Rod End Connector

000694933
MS21255-8LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-069-0593
Aviation Rod End Connector

000690593
MS21255-3LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1961

5340-01-232-3567
Loop Clamp

012323567
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D15-23N: RNCC: 3 | RNVC: 2

12 May 1986

5340-01-252-2488
Electrical-Mechanical Equipment Post

012522488
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C03B02: RNCC: 3 | RNVC: 2

30 Mar 1987

5340-01-218-0797
Dust And Moisture Seal Protective Cap

012180797
NAS841: RNCC: 3 | RNVC: 1
NAS841-8: RNCC: 3 | RNVC: 2
M5501/14-8G: RNCC: 5 | RNVC: 9
MIL-C-5501/14: RNCC: 5 | RNVC: 9
584058: RNCC: 5 | RNVC: 9

6 Oct 1985

5340-01-251-6461
Spring Tension Clip

012516461
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B056-08T: RNCC: 3 | RNVC: 2
NAS1463: RNCC: 5 | RNVC: 9

21 Mar 1987

5340-01-206-1333
Electrical-Mechanical Equipment Post

012061333
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C12: RNCC: 3 | RNVC: 2
10129630: RNCC: 6 | RNVC: 9

15 Apr 1985

5340-01-250-9130
Dust And Moisture Seal Protective Cap-Plug

012509130
NAS834: RNCC: 3 | RNVC: 1
NAS834-213: RNCC: 3 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F40: RNCC: 5 | RNVC: 9

9 Mar 1987

5340-01-249-4386
Butt Hinge

012494386
MS20001P4-8664: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

11 Feb 1987

5340-01-203-7791
Spacing Threaded Standoff

012037791
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C06: RNCC: 3 | RNVC: 2
59818: RNCC: E | RNVC: 8

19 Mar 1985

5340-01-194-3200
Dust And Moisture Seal Protective Cap-Plug

011943200
NAS834: RNCC: 3 | RNVC: 1
NAS834-122: RNCC: 3 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
MS501/7-F25: RNCC: C | RNVC: 1

13 Nov 1984

5340-01-197-3614
Loop Clamp

011973614
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-12: RNCC: 3 | RNVC: 2
1213D1598 FIND 46: RNCC: 3 | RNVC: 9
MS9349-12: RNCC: 5 | RNVC: 9
MS9349-12: RNCC: 5 | RNVC: 9

20 Dec 1984

5340-01-231-7308
Spacing Threaded Standoff

012317308
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B06: RNCC: 3 | RNVC: 2

3 May 1986

5340-01-195-8055
Retaining Strap

011958055
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W30N: RNCC: 3 | RNVC: 2
10112956: RNCC: 6 | RNVC: 9

3 Dec 1984

5340-01-252-0792
Butt Hinge Leaf

012520792
M85731/1-17C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MS14108-17C: RNCC: 5 | RNVC: 9
MIL-F-85731/1: RNCC: 5 | RNVC: 9
10113031: RNCC: 6 | RNVC: 9

29 Mar 1987

5340-01-239-7955
Angle Bracket

012397955
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-322: RNCC: 3 | RNVC: 2
MS9593-322: RNCC: 3 | RNVC: 9
MS9593-322: RNCC: 5 | RNVC: 9

4 Sep 1986

5340-01-229-8317
Loop Clamp

012298317
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-13S: RNCC: 3 | RNVC: 2

6 Apr 1986

5340-01-454-7248
Loop Clamp

014547248
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P6EN: RNCC: 3 | RNVC: 2

11 Apr 1998

5340-01-223-7959
Electrical-Mechanical Equipment Post

012237959
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C05: RNCC: 3 | RNVC: 2

6 Jan 1986

5340-01-223-7937
Electrical-Mechanical Equipment Post

012237937
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3C09: RNCC: 3 | RNVC: 2

6 Jan 1986

5340-01-211-3598
Electrical-Mechanical Equipment Post

012113598
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B14: RNCC: 3 | RNVC: 2
ES3684-01B28A8: RNCC: 5 | RNVC: 9
1120-H-SS-.851-1: RNCC: C | RNVC: 1

26 Jun 1985

5340-01-220-5007
Electrical-Mechanical Equipment Post

012205007
NAS1831: RNCC: 3 | RNVC: 1
5NAS1831A4C56: RNCC: 3 | RNVC: 2
NAS1831A4C56: RNCC: 3 | RNVC: 2
NAS1786A06-56: RNCC: 5 | RNVC: 2

14 Nov 1985

5340-01-220-0348
Electrical-Mechanical Equipment Post

012200348
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B24: RNCC: 3 | RNVC: 2
540-9188-003: RNCC: 3 | RNVC: 2
8228-A-0440-16: RNCC: 5 | RNVC: 9
4SE01228-10: RNCC: 5 | RNVC: 9

6 Nov 1985

5340-01-222-2462
Spacing Threaded Standoff

012222462
NAS1831: RNCC: 3 | RNVC: 1
P317-M09-F09-440: RNCC: 3 | RNVC: 2
NAS1831C3B10: RNCC: 3 | RNVC: 2
8108-SS-0440-7: RNCC: 5 | RNVC: 9
SR4545-9-20: RNCC: 5 | RNVC: 9
13153423-3: RNCC: 7 | RNVC: 2
019215-1: RNCC: 7 | RNVC: 9
GS500CL4C3P10: RNCC: C | RNVC: 1

10 Dec 1985

5340-01-219-7459
Electrical-Mechanical Equipment Post

012197459
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4B16: RNCC: 3 | RNVC: 2
048831-5: RNCC: 5 | RNVC: 2
P-341-M06-F02-440: RNCC: 5 | RNVC: 2
ST4M138-04-10: RNCC: 5 | RNVC: 9
129-0323-00: RNCC: E | RNVC: 8

2 Nov 1985

5340-01-201-8933
Spring Tension Clip

012018933
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-319: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-319: RNCC: 5 | RNVC: 9

23 Feb 1985

5340-01-255-7869
Electrical-Mechanical Equipment Post

012557869
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A3C14: RNCC: 3 | RNVC: 2

27 May 1987

5340-01-235-6042
Butt Hinge

012356042
MS20001PA12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001PA12-188: RNCC: 5 | RNVC: 9

3 Jul 1986

5340-01-212-6024
Expansion Plug

012126024
SAE-AS3123: RNCC: 3 | RNVC: 1
AS3123-06: RNCC: 3 | RNVC: 2
AS3123-06: RNCC: 3 | RNVC: 9
PLGA2505010: RNCC: 5 | RNVC: 2
AS3123-06: RNCC: C | RNVC: 1
J108P54A: RNCC: C | RNVC: 1

15 Jul 1985

5340-01-202-2859
Loop Clamp

012022859
ST9M588WDF24: RNCC: 3 | RNVC: 2
815WD24NB: RNCC: 5 | RNVC: 2
S663WDF24: RNCC: 5 | RNVC: 2
JM44LC28WD24YN: RNCC: 5 | RNVC: 2
TA0220060WNB24: RNCC: 5 | RNVC: 2

28 Feb 1985

5340-01-257-0909
Catch Strike

012570909
M85731/1-13C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
402035: RNCC: 5 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-13C: RNCC: 5 | RNVC: 9

12 Jun 1987

5340-01-213-0854
Spacing Threaded Standoff

012130854
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4C08: RNCC: 3 | RNVC: 2
1551E: RNCC: C | RNVC: 1

23 Jul 1985

5340-01-235-6994
Electrical-Mechanical Equipment Post

012356994
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D20: RNCC: 3 | RNVC: 2
8403A-0832-0: RNCC: 5 | RNVC: 2
NAS1786A08-20: RNCC: 5 | RNVC: 9
8403A-0832-0: RNCC: 5 | RNVC: 9

4 Jul 1986

5340-01-200-2513
Electrical-Mechanical Equipment Post

012002513
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C16: RNCC: 3 | RNVC: 2
2112-632-B: RNCC: 5 | RNVC: 2
2112-632-S-2: RNCC: 5 | RNVC: 2
2112-632-B: RNCC: 5 | RNVC: 2
2112-632-S-2: RNCC: 5 | RNVC: 2
NAS1831-4C16: RNCC: C | RNVC: 1

31 Jan 1985

5340-01-552-5817
Mounting Bracket

015525817
10059263: RNCC: 3 | RNVC: 2
13054500: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-01-248-7962
Turnbuckle

012487962
FFT791-TY1-FM1-CL5-1X6: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1
ASTMF1145: RNCC: 4 | RNVC: 1
ASTM-F1145: RNCC: 5 | RNVC: 1
ASTM-F1145-I1E 1X6: RNCC: 5 | RNVC: 1
FFT791TYPE1FORM1CLASS5-1X6: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9

31 Jan 1987

5340-01-249-0469
Spacing Threaded Standoff

012490469
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5C10: RNCC: 3 | RNVC: 2

5 Feb 1987

5340-01-226-4605
Electrical-Mechanical Equipment Post

012264605
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C09: RNCC: 3 | RNVC: 2
NAS1831-C4C09: RNCC: C | RNVC: 1
8216-SS-0632-7: RNCC: C | RNVC: 1
8216-SS-0632-7: RNCC: C | RNVC: 1
8157-SS-0632-0: RNCC: C | RNVC: 1
8157-SS-0632-7: RNCC: E | RNVC: 8

19 Feb 1986

5340-01-282-5711
Loop Clamp

012825711
AN742F11: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AS5587C11: RNCC: 5 | RNVC: 1
AS5587C11: RNCC: 5 | RNVC: 9
MS21103-11: RNCC: 5 | RNVC: 9

18 Jul 1988

5340-01-265-4889
Loop Clamp

012654889
JM44LC43H6WC: RNCC: 3 | RNVC: 2
TAO25071CWJ6: RNCC: 3 | RNVC: 2
9D0172A6: RNCC: 5 | RNVC: 2
JM44LC43H6WC: RNCC: 5 | RNVC: 9
211-501-9656: RNCC: 7 | RNVC: 2

14 Oct 1987

5340-01-265-9124
Spring Tension Clip

012659124
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B050-10C: RNCC: 3 | RNVC: 2

19 Oct 1987

5340-01-285-3390
Webbing Strap

012853390
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R10B12: RNCC: 3 | RNVC: 2

10 Sep 1988

5340-01-298-4918
Clamp Bolt Assembly

012984918
M85731/1-5: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
490001-5: RNCC: 5 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
500016: RNCC: 5 | RNVC: 9
ST9M454-4-1: RNCC: 5 | RNVC: 9
MS14108-5: RNCC: 5 | RNVC: 9
10086889: RNCC: 6 | RNVC: 9
5340PL0855920: RNCC: 6 | RNVC: 9
5340PL1868311: RNCC: 6 | RNVC: 9

17 Apr 1989

5340-01-308-3875
Spring Tension Clip

013083875
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-246: RNCC: 3 | RNVC: 2
416949-146: RNCC: 5 | RNVC: 9
M24066/2-246: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-046: RNCC: 5 | RNVC: 9

27 Sep 1989

5340-01-323-3959
Spacing Threaded Standoff

013233959
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A03: RNCC: 3 | RNVC: 2

27 Jul 1990

NSN 5340-01-269-9345 012699345 PADLOCK SET

5340-01-269-9345
Padlock Set

012699345
AA59486-1AB05LS2EL: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
AA59486-1AB05LS2E1: RNCC: 5 | RNVC: 9
MS21313-53: RNCC: 5 | RNVC: 9

23 Dec 1987

5340-01-299-4632
Loop Clamp

012994632
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D4-12N: RNCC: 3 | RNVC: 2

1 May 1989

5340-01-306-8573
Spacing Threaded Standoff

013068573
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A5D08: RNCC: 3 | RNVC: 2
NAS1831A5D08: RNCC: C | RNVC: 1

31 Aug 1989

5340-01-312-5368
Mounting Bracket

013125368
16K2341-837: RNCC: 3 | RNVC: 2
16K2341-837: RNCC: 5 | RNVC: 2
16K2341-837: RNCC: 5 | RNVC: 2
16K2341-837: RNCC: 5 | RNVC: 9
5340PL2062216: RNCC: 6 | RNVC: 9

17 Dec 1989

5340-01-396-4354
Bow Handle

013964354
NASM39087: RNCC: 3 | RNVC: 1
MS39087-311CP: RNCC: 3 | RNVC: 2
MS39087-311CP: RNCC: 5 | RNVC: 9

20 Sep 1994

5340-01-223-4409
Access Hole Frame

012234409
24-76-3002A: RNCC: 3 | RNVC: 2
DIE-FB-1: RNCC: 5 | RNVC: 9
DIE-EB-1: RNCC: 5 | RNVC: 9
DIE-EB-1: RNCC: 5 | RNVC: 9

30 Dec 1985

5340-01-451-4704
Webbing Strap

014514704
NAS1383: RNCC: 3 | RNVC: 1
NAS1383C12C36R: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-01-265-6274
Snap Hook

012656274
NAS1282: RNCC: 3 | RNVC: 1
NAS1282A32: RNCC: 3 | RNVC: 2

17 Oct 1987

5340-01-274-2728
Electrical-Mechanical Equipment Post

012742728
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D24: RNCC: 3 | RNVC: 2
113B4800P1: RNCC: 5 | RNVC: 2
76954-62: RNCC: C | RNVC: 1

7 Mar 1988

5340-01-364-0185
Butt Hinge

013640185
MS20001P9-2400: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

11 Sep 1992

5340-01-354-4170
Retaining Strap

013544170
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D16-32S: RNCC: 3 | RNVC: 2

28 Feb 1992

5340-01-354-7784
Loop Clamp

013547784
SAE-AS9353: RNCC: 3 | RNVC: 1
MS9353-08: RNCC: 3 | RNVC: 2
MS9353-08: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-01-350-1291
Retaining Strap

013501291
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C18W44N: RNCC: 3 | RNVC: 2

11 Dec 1991

5340-01-296-1730
Electrical-Mechanical Equipment Post

012961730
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D18: RNCC: 3 | RNVC: 2
8401-SS-0440-7: RNCC: C | RNVC: 1
SC5340-0099-26: RNCC: C | RNVC: 1
8401-SS-0832-7: RNCC: C | RNVC: 1

16 Mar 1989

5340-01-299-3365
Butt Hinge Leaf

012993365
M85731/1-21C: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1

30 Apr 1989

5340-01-266-3216
Electrical-Mechanical Equipment Post

012663216
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-5D12: RNCC: 3 | RNVC: 2
NAS1786-08-12: RNCC: 5 | RNVC: 9

23 Oct 1987

5340-01-336-5986
Loop Clamp

013365986
MS9025-10: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

28 Mar 1991

5340-01-380-9119
Loop Clamp

013809119
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D39: RNCC: 3 | RNVC: 2
AN735D39: RNCC: 5 | RNVC: 9

29 Sep 1993

5340-01-408-7884
Loop Clamp

014087884
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C10Z: RNCC: 3 | RNVC: 2

25 Feb 1995

5340-01-399-6991
Snap Hook

013996991
NASM43770/12: RNCC: 3 | RNVC: 1
M43770/12-MIZE2: RNCC: 3 | RNVC: 2
MIL-S-43770/12A: RNCC: 5 | RNVC: 9
M43770/12-MIZE2: RNCC: 5 | RNVC: 9

3 Dec 1994

5340-01-387-0079
Butt Hinge Leaf

013870079
MS20001Y4-1600: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

23 Feb 1994

5340-01-386-8320
Seal Retaining Plate

013868320
442-700: RNCC: 3 | RNVC: 2
0481-0700: RNCC: E | RNVC: 8
2D/481-700: RNCC: E | RNVC: 8
2D/442-700: RNCC: E | RNVC: 8
0416-0700-13: RNCC: E | RNVC: 8
0416-0700-13: RNCC: E | RNVC: 8
0416-0700: RNCC: E | RNVC: 8
0416-0700: RNCC: E | RNVC: 8
0442-0700: RNCC: E | RNVC: 8
0442-0700: RNCC: E | RNVC: 8

16 Feb 1994

5340-01-389-8005
Loop Clamp

013898005
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D8T: RNCC: 3 | RNVC: 2

4 May 1994

5340-01-386-3964
Loop Clamp

013863964
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D18-25N: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-01-711-0688
Access Cover

017110688
770940: RNCC: 3 | RNVC: 2

18 Jul 2023

5340-01-710-9552
Mounting Plate

017109552
763769: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-711-0386
Lock-Release Lever

017110386
LS1126147: RNCC: 3 | RNVC: 2

17 Jul 2023

5340-01-711-0341
Engine Accessory Bracket

017110341
4322292-19: RNCC: 3 | RNVC: 2

17 Jul 2023

5340-01-710-9071
Dust And Moisture Seal Protective Cover

017109071
00-848668: RNCC: 3 | RNVC: 2

7 Jul 2023

5340-01-710-9540
Dust And Moisture Seal Protective Cap

017109540
373966-3334: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-710-7266
Helical Compression Spring Seat

017107266
3031646-001: RNCC: 3 | RNVC: 2

20 Jun 2023

5340-01-434-2425
Dust And Moisture Seal Protective Cap

014342425
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-2630: RNCC: 3 | RNVC: 2
MIL-C-5501/31: RNCC: 5 | RNVC: 9
M5501/31-2630: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-486-2219
Crank Handle

014862219
129361: RNCC: 3 | RNVC: 2
129361: RNCC: 5 | RNVC: 2
50389-298: RNCC: 5 | RNVC: 9

21 Jun 2001

5340-01-354-4144
Electrical-Mechanical Equipment Post

013544144
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C3A08: RNCC: 3 | RNVC: 2
2698051-6: RNCC: C | RNVC: 1

28 Feb 1992

5340-01-441-0923
Spacing Threaded Standoff

014410923
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C11: RNCC: 3 | RNVC: 2

3 Feb 1997

5340-01-434-2369
Dust And Moisture Seal Protective Cap

014342369
NASM5501/31: RNCC: 3 | RNVC: 1
M5501-31-1093: RNCC: 3 | RNVC: 2
M5501/31-1093: RNCC: 3 | RNVC: 2
M5501/31-1093: RNCC: 5 | RNVC: 9
MIL-C-5501/31: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-431-8752
Expansion Plug

014318752
3920706: RNCC: 3 | RNVC: 2
3920706: RNCC: 5 | RNVC: 2
3920706: RNCC: 5 | RNVC: 2
17218100-0: RNCC: 5 | RNVC: 2

21 May 1996

5340-01-344-6915
Spring Tension Clip

013446915
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-068-08C: RNCC: 3 | RNVC: 2

5 Sep 1991

5340-01-434-2412
Dust And Moisture Seal Protective Cap

014342412
NASM5501/31: RNCC: 3 | RNVC: 1
M5501/31-2215: RNCC: 3 | RNVC: 2
M5501/31-2215: RNCC: 5 | RNVC: 9
MIL-C-5501/31: RNCC: 5 | RNVC: 9
NASM5501/31-2215: RNCC: 5 | RNVC: 9

24 Jul 1996

5340-01-461-0195
Dust And Moisture Seal Protective Cap-Plug

014610195
NAS834: RNCC: 3 | RNVC: 1
NAS834-41: RNCC: 3 | RNVC: 2
NAS834-41: RNCC: C | RNVC: 1

24 Nov 1998

5340-01-451-5400
Webbing Strap

014515400
NAS1383: RNCC: 3 | RNVC: 1
NAS1383C12C70R: RNCC: 3 | RNVC: 2

19 Dec 1997

5340-01-449-6995
Spacing Threaded Standoff

014496995
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C64: RNCC: 3 | RNVC: 2

10 Oct 1997

5340-01-447-3874
Loop Clamp

014473874
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P6DB: RNCC: 3 | RNVC: 2

5 Aug 1997

5340-00-990-5332
Spring Tension Clip

009905332
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-112-14C: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-01-658-6708
Dust And Moisture Seal Boot

016586708
3375253: RNCC: 3 | RNVC: 2
337525-3: RNCC: 3 | RNVC: 2

11 Oct 2016

5340-00-965-6918
Webbing Strap

009656918
NAS1213: RNCC: 3 | RNVC: 1
NAS1213R15J60: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-01-472-4542
Air Retaining Strap

014724542
NASM85449/4: RNCC: 3 | RNVC: 1
M85449/4-12: RNCC: 3 | RNVC: 2
M85449/4-12: RNCC: 5 | RNVC: 9

3 Mar 2000

5340-01-470-1706
Dust And Moisture Seal Protective Cap

014701706
AS85049/138-26C: RNCC: 3 | RNVC: 1
SAE-AS85049/138: RNCC: 5 | RNVC: 1
MS90376-14YB: RNCC: 5 | RNVC: 9

9 Dec 1999

5340-01-480-2092
Loop Clamp Kit

014802092
3038609: RNCC: 3 | RNVC: 2
003 0386 09: RNCC: 3 | RNVC: 9
3038609: RNCC: 5 | RNVC: 2
003038609: RNCC: 5 | RNVC: 2

9 Nov 2000

5340-01-470-1587
Dust And Moisture Seal Protective Cap

014701587
MS90376-16YB: RNCC: 2 | RNVC: 2

9 Dec 1999

5340-01-480-2068
Spacing Threaded Standoff

014802068
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-4C52: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-01-462-1544
Spacing Threaded Standoff

014621544
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6D10: RNCC: 3 | RNVC: 2

22 Jan 1999

5340-00-958-6451
Dust And Moisture Seal Boot

009586451
14500-1: RNCC: 3 | RNVC: 2
15500-1: RNCC: 3 | RNVC: 2
K88M0038: RNCC: 5 | RNVC: 9
GB806N1: RNCC: 7 | RNVC: 1
8437249: RNCC: 7 | RNVC: 2

23 May 1966

5340-01-373-8677
Electrical-Mechanical Equipment Post

013738677
NAS1830: RNCC: 3 | RNVC: 1
NAS1830B03B04: RNCC: 3 | RNVC: 2

11 Apr 1993

5340-01-474-3070
Aircr Mending Plate

014743070
SAE-AS9551: RNCC: 3 | RNVC: 1
MS9551-026: RNCC: 3 | RNVC: 2
MS9551-026: RNCC: 5 | RNVC: 9

1 May 2000

5340-01-422-6849
Loop Clamp

014226849
M85052/2-12: RNCC: 2 | RNVC: 2
MIL-DTL-85052/2: RNCC: 4 | RNVC: 1
MIL-C-85052/2-12: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-01-501-4817
Aircraft Loop Clamp

015014817
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D5-20N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-520-7456
Bumper

015207456
500K3359-SV: RNCC: 3 | RNVC: 2
527-0116-00: RNCC: 3 | RNVC: 9
500K3359: RNCC: 5 | RNVC: 9
500K3359: RNCC: 5 | RNVC: 9
500K3359: RNCC: C | RNVC: 1

25 May 2004

5340-01-521-8090
Loop Clamp

015218090
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC72: RNCC: 3 | RNVC: 2
AS7351DC72: RNCC: 5 | RNVC: 9
AN735DC72: RNCC: 5 | RNVC: 9

6 Jul 2004

5340-01-501-4921
Aircraft Loop Clamp

015014921
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D7-24N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-501-4717
Air Retaining Strap

015014717
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D14W26N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-706-3776
Rigid Connecting Link

017063776
6-63373-1: RNCC: 3 | RNVC: 2
6-53373-1: RNCC: 5 | RNVC: 9

19 Nov 2022

5340-00-240-2580
Strap Hinge

002402580
BHMA-A156.20: RNCC: 3 | RNVC: 1
BHMA-A156.20 A81221 12IN: RNCC: 3 | RNVC: 2
MS27972-28: RNCC: 5 | RNVC: 9
A156.20 A81221: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-507-6647
Loop Clamp

015076647
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D11T: RNCC: 3 | RNVC: 2

1 May 2003

5340-01-501-4955
Air Retaining Strap

015014955
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-32N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-524-6278
Butt Hinge

015246278
MS20001PA6-5742: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

8 Oct 2004

5340-01-530-1537
Loop Clamp

015301537
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587C03: RNCC: 3 | RNVC: 2
AS5587C03: RNCC: 3 | RNVC: 9

17 May 2005

5340-01-501-4979
Aircraft Loop Clamp

015014979
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-40N: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-01-216-6302
Rim Lock Set

012166302
BHMA-A156.5: RNCC: 3 | RNVC: 1
BHMA-A156.5 E09292: RNCC: 3 | RNVC: 2
ANSI156.5 E06292: RNCC: 5 | RNVC: 9
A-A-1932: RNCC: 5 | RNVC: 9

14 Sep 1985

5340-01-512-0494
Loop Clamp

015120494
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-15N: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-01-495-5537
Butt Hinge

014955537
MS20001PA14-1720: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

20 Mar 2002

5340-01-511-6848
Retaining Strap

015116848
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C25W29N: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-01-543-5409
Retaining Strap

015435409
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D17W40N: RNCC: 3 | RNVC: 2
NAS1677D16W40N: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-01-539-9291
Mounting Plate

015399291
29535213: RNCC: 3 | RNVC: 2
29535213: RNCC: 3 | RNVC: 9
2002164: RNCC: 5 | RNVC: 2
54016-000: RNCC: 5 | RNVC: 2
9535213: RNCC: 5 | RNVC: 9
3727830: RNCC: 7 | RNVC: 2

4 May 2006

5340-01-538-0722
Spacing Threaded Standoff

015380722
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4G11: RNCC: 3 | RNVC: 2

9 Mar 2006

5340-01-543-3861
Loop Clamp

015433861
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-32N: RNCC: 3 | RNVC: 2

11 Sep 2006

5340-01-542-4888
Retaining Strap

015424888
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8-56N: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-01-545-1341
Aircr Loop Clamp(1)

015451341
30-306J17: RNCC: 3 | RNVC: 2
30-306J17: RNCC: 5 | RNVC: 2
30-306J17: RNCC: 5 | RNVC: 2
30-306J17: RNCC: 5 | RNVC: 2
30-306: RNCC: D | RNVC: 9

2 Nov 2006

5340-01-541-0898
Mounting Bracket

015410898
1789-AA3-001: RNCC: 3 | RNVC: 2
1789-AA3-001: RNCC: 3 | RNVC: 9
1000857: RNCC: 5 | RNVC: 2
53932-490: RNCC: 5 | RNVC: 2

14 Jun 2006

5340-01-533-8749
Angle Bracket

015338749
A488250100: RNCC: 3 | RNVC: 2
CV185414: RNCC: 5 | RNVC: 2
A48825.0100: RNCC: 5 | RNVC: 2
A48825.0100: RNCC: 5 | RNVC: 2
EP-0002613: RNCC: 5 | RNVC: 2

29 Sep 2005

5340-01-547-8589
Butt Hinge Leaf

015478589
MS20001PX4-420: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

1 Feb 2007

5340-01-398-3943
Electrical-Mechanical Equipment Post

013983943
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C48: RNCC: 3 | RNVC: 2

7 Jul 1984

5340-00-990-8712
Loop Clamp

009908712
MS21334-5: RNCC: 2 | RNVC: 2
NASM21334: RNCC: 5 | RNVC: 1

28 Mar 1967

5340-00-248-6094
Grooved Clamp Coupling Ferrule

002486094
7102A: RNCC: 3 | RNVC: 2
SABA-F: RNCC: 3 | RNVC: 2
600049P30: RNCC: 3 | RNVC: 2
13-114-4: RNCC: 5 | RNVC: 2
416-1953-01-14-00: RNCC: 5 | RNVC: 9
43-15173A21: RNCC: 5 | RNVC: 9
1953-1: RNCC: 5 | RNVC: 9
416-1953-01-14: RNCC: 5 | RNVC: 9
ABAMF: RNCC: 5 | RNVC: 9
16016-A-2: RNCC: 5 | RNVC: 9

7 Nov 1969

5340-01-222-2463
Electrical-Mechanical Equipment Post

012222463
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A16: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-01-576-6256
Dust And Moisture Seal Protective Cap

015766256
PH/PD6-285: RNCC: 3 | RNVC: 2
A 681 431 00 87: RNCC: 5 | RNVC: 9

10 Aug 2009

5340-01-597-3936
Loop Clamp

015973936
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG08: RNCC: 3 | RNVC: 2
AS21919WCG08: RNCC: 3 | RNVC: 9
AS21919WCG8: RNCC: E | RNVC: 8
AS21919WCG8: RNCC: E | RNVC: 8

9 Jun 2011

5340-01-547-7057
Dust And Moisture Seal Protective Cap

015477057
NAS835: RNCC: 3 | RNVC: 1
NAS835-4: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-01-606-5191
Loop Clamp

016065191
NASM21333: RNCC: 3 | RNVC: 1
MS21333-73: RNCC: 3 | RNVC: 2

18 May 2012

5340-01-556-3996
Spring Tension Clip

015563996
NAS1464: RNCC: 3 | RNVC: 1
NAS 1464-098-10N: RNCC: 3 | RNVC: 2
NAS1464-098-10N: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-00-257-0044
Loop Clamp

002570044
842967PC9: RNCC: 3 | RNVC: 2
76B761: RNCC: 3 | RNVC: 2
CPC742-9: RNCC: 3 | RNVC: 2
CPC74219: RNCC: 3 | RNVC: 2
742-9: RNCC: 3 | RNVC: 2
CPC1949-9: RNCC: 3 | RNVC: 2
EC9: RNCC: 3 | RNVC: 2
3038-9012PC9: RNCC: 3 | RNVC: 2
102302-8: RNCC: 5 | RNVC: 2
3038-9012PC9: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-178-7875
Hinged Hasp

001787875
13226E6045-3A: RNCC: 3 | RNVC: 2
MIL-H-43905-03A: RNCC: 4 | RNVC: 1
13226E6066-1: RNCC: 5 | RNVC: 2
13225E8478-1: RNCC: 5 | RNVC: 2
13225E8477-1: RNCC: 5 | RNVC: 2
13226E6070-3A: RNCC: 5 | RNVC: 2
MIL-H-434905: RNCC: 5 | RNVC: 9
4-1-477: RNCC: 5 | RNVC: 9
MIL-H-43905: RNCC: 5 | RNVC: 9
MIL-H-43905/3: RNCC: 5 | RNVC: 9

16 Apr 1969

5340-00-177-4073
Spring Tension Clip

001774073
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-002: RNCC: 3 | RNVC: 2
100-300-2-15: RNCC: 5 | RNVC: 1
6013-14CC-012: RNCC: 5 | RNVC: 9
MILC24066-2: RNCC: 5 | RNVC: 9
M24066-2-002: RNCC: 5 | RNVC: 9
581664&1: RNCC: C | RNVC: 1

18 Nov 1969

5340-01-617-5876
Rod End Connector

016175876
075SA0096: RNCC: 3 | RNVC: 9
EP-0020977: RNCC: 5 | RNVC: 2

27 Mar 2013

5340-01-265-6334
Electrical-Mechanical Equipment Post

012656334
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E16: RNCC: 3 | RNVC: 2
8067-531: RNCC: C | RNVC: 1
9800-SS-0632-7: RNCC: E | RNVC: 8

17 Oct 1987

5340-01-572-0091
Mounting Bracket

015720091
13032969: RNCC: 3 | RNVC: 2
21030053: RNCC: 5 | RNVC: 9

24 Feb 2009

5340-01-567-8103
Mounting Bracket

015678103
AT446949: RNCC: 3 | RNVC: 9
AT206909: RNCC: 5 | RNVC: 9

8 Oct 2008

5340-01-601-8846
Loop Clamp

016018846
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D24: RNCC: 3 | RNVC: 2
AS5587D24: RNCC: 3 | RNVC: 9

26 Jan 2012

5340-01-562-0213
Access Cover

015620213
184K0544-1-SV: RNCC: 3 | RNVC: 2
184K0544-1: RNCC: 3 | RNVC: 9
184K0184-1: RNCC: 5 | RNVC: 9
184K0184-1: RNCC: 5 | RNVC: 9
184K0544-1: RNCC: 5 | RNVC: 9

26 Mar 2008

5340-01-703-2143
Seal Retaining Plate

017032143
114T4225-8: RNCC: 3 | RNVC: 2

23 Aug 2022

5340-01-702-9650
Dust And Moisture Seal Protective Plug

017029650
842-349958-3: RNCC: 3 | RNVC: 2

9 Aug 2022

5340-01-702-4960
Block Clamp

017024960
270T0004-481: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-00-043-0436
Spring Tension Clip

000430436
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-036-08C: RNCC: 3 | RNVC: 2
6001-80C: RNCC: 5 | RNVC: 9
6001-80C: RNCC: C | RNVC: 1

11 May 1967

5340-01-707-5717
Mounting Plate

017075717
166-31701: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-702-4979
Block Clamp

017024979
270T0004-482: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-701-1173
Loop Clamp

017011173
10-SB-1-R-.250: RNCC: 3 | RNVC: 2
571-181800 PC37: RNCC: 5 | RNVC: 1
571-181801 PC37: RNCC: C | RNVC: 1

27 Apr 2022

5340-01-514-7829
Retaining Strap

015147829
184R-0004: RNCC: 3 | RNVC: 2
A184R-4: RNCC: 5 | RNVC: 9

5 Nov 2003

5340-01-385-3735
Angle Bracket

013853735
SAE-AS9596: RNCC: 3 | RNVC: 1
MS9596-010: RNCC: 3 | RNVC: 2
MS9596-010: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-01-581-2789
Expansion Plug

015812789
SAE-AS9379: RNCC: 3 | RNVC: 1
MS9379-09: RNCC: 3 | RNVC: 2
MS9379-09: RNCC: 3 | RNVC: 9
MS9379-09: RNCC: 5 | RNVC: 9

12 Jan 2010

5340-01-580-8992
Loop Clamp

015808992
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C8-18N: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-01-594-2040
Loop Clamp

015942040
SAE-AS25281: RNCC: 3 | RNVC: 1
AS25281-F4: RNCC: 3 | RNVC: 2

25 Apr 2011

5340-01-580-9014
Loop Clamp

015809014
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C21-33N: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-01-423-2283
Spacing Threaded Standoff

014232283
NAS1129: RNCC: 3 | RNVC: 1
NAS1129C3B16: RNCC: 3 | RNVC: 2

19 Dec 1995

5340-01-581-4822
Retaining Strap

015814822
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12-24N: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-01-568-7378
Hose Crimp Cage

015687378
1F40105-12C: RNCC: 3 | RNVC: 2
1001339: RNCC: 5 | RNVC: 2
N513-3040: RNCC: 5 | RNVC: 2
1F40105-12C: RNCC: 5 | RNVC: 2
S000055: RNCC: D | RNVC: 9

7 Nov 2008

5340-01-587-9120
Bow Handle

015879120
NASM39087: RNCC: 3 | RNVC: 1
MS39087-1: RNCC: 3 | RNVC: 2

25 Aug 2010

5340-01-615-1128
Retaining Strap

016151128
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D11W26N: RNCC: 3 | RNVC: 2

28 Dec 2012

5340-01-645-9819
Snap Hook

016459819
NFPA21004: RNCC: 3 | RNVC: 2
OP12S55LNFPA: RNCC: 5 | RNVC: 9

7 Jul 2015

5340-01-613-0107
Dust And Moisture Seal Protective Cap

016130107
202112: RNCC: 3 | RNVC: 2
202112: RNCC: 5 | RNVC: 2
001-302-15: RNCC: 5 | RNVC: 2
202112: RNCC: 5 | RNVC: 2
21-0245: RNCC: 5 | RNVC: 2
202112: RNCC: 5 | RNVC: 9
202112: RNCC: C | RNVC: 1

27 Oct 2012

5340-01-626-8854
Spring Tension Clip

016268854
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-010-03C: RNCC: 3 | RNVC: 2

24 Mar 2014

5340-01-624-7072
Angle Bracket

016247072
SAE-AS9603: RNCC: 3 | RNVC: 1
MS9603-712: RNCC: 3 | RNVC: 2
MS9603-712: RNCC: 3 | RNVC: 9

13 Jan 2014

5340-01-619-0959
Loop Clamp

016190959
NASM21333: RNCC: 3 | RNVC: 1
MS21333-51: RNCC: 3 | RNVC: 2
NASM21333-51: RNCC: 5 | RNVC: 2

16 May 2013

5340-01-615-1813
Retaining Strap

016151813
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D12W20N: RNCC: 3 | RNVC: 2

3 Jan 2013

5340-01-651-8840
Butt Hinge

016518840
MS20001-6-2300: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001-6-2300: RNCC: 5 | RNVC: 9

2 Feb 2016

5340-01-627-4963
Retaining Strap

016274963
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D20W56S: RNCC: 3 | RNVC: 2

16 Apr 2014

5340-01-331-3192
Loop Clamp

013313192
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D6S: RNCC: 3 | RNVC: 2

17 Dec 1990

5340-01-701-7061
Mounting Bracket

017017061
341479-2: RNCC: 3 | RNVC: 2
341479: RNCC: D | RNVC: 9

2 Jun 2022

5340-01-698-7207
Buckle

016987207
FDA3606-1: RNCC: 3 | RNVC: 2

3 Dec 2021

5340-01-643-9151
Clamping Catch

016439151
193730-B00: RNCC: 3 | RNVC: 2
193730B00: RNCC: 3 | RNVC: 2

16 Apr 2015

5340-01-680-8230
Loop Clamp

016808230
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C8NWH: RNCC: 3 | RNVC: 2

22 May 2019

5340-01-706-6869
Recess Handle

017066869
94US32D316: RNCC: 3 | RNVC: 2
1634A44: RNCC: 5 | RNVC: 2
608-8873413ITEM10: RNCC: D | RNVC: 9

13 Dec 2022

5340-01-697-7772
Retaining Strap

016977772
SRPV2200381-111: RNCC: 3 | RNVC: 2

8 Oct 2021

5340-01-706-1095
Blank Panel

017061095
172556-2: RNCC: 3 | RNVC: 2

1 Nov 2022

5340-01-703-3117
Spacing Threaded Standoff

017033117
14310-H-SS-.750-12A: RNCC: 3 | RNVC: 2

29 Aug 2022

5340-01-707-4665
Caster Wheel

017074665
W-415-PVZ-1/2: RNCC: 3 | RNVC: 2

3 Feb 2023

5340-01-698-9928
Rigid Connecting Link

016989928
123C10200-503: RNCC: 3 | RNVC: 2

29 Dec 2021

5340-01-701-0603
Access Cover

017010603
9272C31G05: RNCC: 3 | RNVC: 2
PL 9272C31: RNCC: D | RNVC: 9
9272C31: RNCC: D | RNVC: 9

25 Apr 2022

5340-01-695-2188
Access Cover

016952188
8M0174560: RNCC: 3 | RNVC: 2
8M0142869: RNCC: 3 | RNVC: 9

21 May 2021

5340-01-682-3982
Elastic Strap

016823982
21T145: RNCC: 3 | RNVC: 9
21T145: RNCC: 5 | RNVC: 2
EPDM9: RNCC: 5 | RNVC: 2

6 Aug 2019

5340-01-616-1375
Butt Hinge

016161375
MS20001PA3-1200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

4 Feb 2013

5340-01-285-4101
Butt Hinge

012854101
AA55592-12D: RNCC: 2 | RNVC: 2
A-A-55592: RNCC: 4 | RNVC: 1
MS35825-12D: RNCC: 5 | RNVC: 9

13 Sep 1988

5340-01-330-5574
Electrical-Mechanical Equipment Post

013305574
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6D60: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-01-644-4228
Butt Hinge Leaf

016444228
MS20001PH5-2960: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

5 May 2015

5340-01-677-5861
Aircraft Structural Component Bracket

016775861
SAE-AS9594: RNCC: 3 | RNVC: 1
MS9594-246: RNCC: 3 | RNVC: 2
MS9594-246: RNCC: 5 | RNVC: 9

20 Dec 2018

5340-01-265-6989
Retaining Strap

012656989
231AL: RNCC: 3 | RNVC: 9
H40A: RNCC: 5 | RNVC: 2
SM-A-838639-1: RNCC: 7 | RNVC: 2

17 Oct 1987

5340-01-172-2102
Loop Clamp

011722102
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-8K: RNCC: 3 | RNVC: 2

16 Feb 1984

5340-01-302-6223
Electrical-Mechanical Equipment Post

013026223
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B25: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-01-005-3159
Expansion Shield

010053159
409492: RNCC: 3 | RNVC: 2
00045752: RNCC: 5 | RNVC: 9
000457523: RNCC: 5 | RNVC: 9

23 Jun 1975

5340-01-295-4098
Clamp Bolt Assembly

012954098
M85731/1-5A: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9

4 Mar 1989

5340-01-138-0782
Spring Tension Clip

011380782
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-036: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-036: RNCC: 5 | RNVC: 9

5 Sep 1982

5340-01-054-1817
Expansion Plug

010541817
MS35648-1: RNCC: 2 | RNVC: 2
MIL-P-20691: RNCC: 4 | RNVC: 1
5340010541817: RNCC: 5 | RNVC: 9
5340010541817: RNCC: 6 | RNVC: 9

16 Jan 1978

5340-01-194-6530
Loop Clamp

011946530
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C6A: RNCC: 3 | RNVC: 2

16 Nov 1984

5340-01-466-8094
Spacing Threaded Standoff

014668094
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B19: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-01-197-5047
Electrical-Mechanical Equipment Post

011975047
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6D56: RNCC: 3 | RNVC: 2

21 Dec 1984

5340-01-666-0525
Mounting Bracket

016660525
H10102-1B3: RNCC: 3 | RNVC: 2
201-028: RNCC: 5 | RNVC: 2
NT000015: RNCC: 5 | RNVC: 2

22 Aug 2017

5340-01-684-4551
Access Cover

016844551
820-157: RNCC: 3 | RNVC: 1
820-157/8324510: RNCC: 3 | RNVC: 2
6914580/SHEET 5FIND 29ED: RNCC: 5 | RNVC: 2
820-157ED: RNCC: 5 | RNVC: 2
820-157: RNCC: 5 | RNVC: 2
6914580/SHEET 5FIND 29: RNCC: D | RNVC: 9

4 Nov 2019

5340-01-684-1596
Grooved Clamp Coupling

016841596
SAE-AS5355/1: RNCC: 3 | RNVC: 1
AS5355/1-15B: RNCC: 3 | RNVC: 2

23 Oct 2019

5340-01-463-8732
A Fuel Bracket Assy

014638732
23089569: RNCC: 3 | RNVC: 2
NSN SPECIFIC V-22 AE1107C ENGINE: RNCC: 5 | RNVC: 2
23063067: RNCC: 5 | RNVC: 9

8 Apr 1999

5340-01-645-5738
Mounting Bracket

016455738
7A40098: RNCC: 3 | RNVC: 2
7A0098: RNCC: 5 | RNVC: 9
7A40027 REV D FIND NO 3: RNCC: C | RNVC: 1

22 Jun 2015

5340-01-412-9770
Spacing Threaded Standoff

014129770
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C14B04: RNCC: 3 | RNVC: 2

3 May 1995

5340-01-429-8607
Elbow Catch

014298607
8T0119: RNCC: 3 | RNVC: 2
8T-0119: RNCC: 5 | RNVC: 2

19 Apr 1996

5340-01-139-4428
Loop Clamp

011394428
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT8K: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-00-950-1392
Swivel Caster

009501392
NASM24373: RNCC: 3 | RNVC: 1
MS24373-8WSF: RNCC: 3 | RNVC: 2
11717-8WSF: RNCC: 5 | RNVC: 1
C31S12-HM-8WSF: RNCC: 5 | RNVC: 1
12041-8WSF: RNCC: 5 | RNVC: 1
MS24373-8WSF: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-701-5178
Dust And Moisture Seal Protective Cap

017015178
680160-2: RNCC: 3 | RNVC: 2

20 May 2022

5340-01-066-3966
Turnbuckle

010663966
ASTM F 1145: RNCC: 3 | RNVC: 1
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 1/2X12: RNCC: 3 | RNVC: 2
S223-1-2X12: RNCC: 3 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9

9 Oct 1978

5340-01-160-2303
Loop Clamp

011602303
SAE-AS9354: RNCC: 3 | RNVC: 1
MS9354-08: RNCC: 3 | RNVC: 2
AS9354-08: RNCC: 3 | RNVC: 9
AS9354-08: RNCC: 5 | RNVC: 9
MS9354-08: RNCC: 5 | RNVC: 9

19 Aug 1983

5340-01-159-4008
Spring Tension Clip

011594008
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-222: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-222: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-01-073-9664
Loop Clamp

010739664
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K14N: RNCC: 3 | RNVC: 2

23 Mar 1979

5340-00-721-8015
Loop Clamp

007218015
SAE-AS21919: RNCC: 3 | RNVC: 1
S663WDF10: RNCC: 3 | RNVC: 2
JM44LC28WD10YN: RNCC: 3 | RNVC: 2
TA1716WD10AF: RNCC: 5 | RNVC: 9
815WD10: RNCC: 5 | RNVC: 9
JM44LC28WDG10: RNCC: 5 | RNVC: 9
MS21104WD-10: RNCC: 5 | RNVC: 9
74392: RNCC: 5 | RNVC: 9
MS21104DW10: RNCC: 5 | RNVC: 9
3929AS1421-WDG10: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-700-3549
Utility Resilient Mount

017003549
L3045856-025: RNCC: 3 | RNVC: 2
L3045856-025: RNCC: 5 | RNVC: 2

24 Mar 2022

5340-01-168-9784
Loop Clamp

011689784
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919CH52: RNCC: 3 | RNVC: 2
MIL-C-8603: RNCC: 5 | RNVC: 9
MS21919CH52: RNCC: 5 | RNVC: 9

30 Dec 1983

5340-01-705-5187
Mounting Bracket

017055187
A3417313-0: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-708-0899
Utility Access Door

017080899
5-13-10518-2: RNCC: 3 | RNVC: 2
5-13-10518: RNCC: D | RNVC: 9

15 Mar 2023

5340-01-705-9078
Mounting Bracket

017059078
12609174: RNCC: 3 | RNVC: 2
12609174: RNCC: 5 | RNVC: 2

20 Oct 2022

5340-01-707-0002
Mounting Bracket

017070002
3673310M01110-305: RNCC: 3 | RNVC: 2
3673310M01110-305: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-706-9971
Retaining Strap

017069971
SRPV2200388-119: RNCC: 3 | RNVC: 2

9 Jan 2023

5340-01-706-9956
Cushioning Pad

017069956
12193-1702-01: RNCC: 3 | RNVC: 2
12193-1702: RNCC: D | RNVC: 9

9 Jan 2023

5340-01-705-8502
Spacing Threaded Standoff

017058502
495-8753892-FIND NO-AY-1-26: RNCC: 3 | RNVC: 2

17 Oct 2022

5340-01-709-1390
Mounting Bracket

017091390
821512515071: RNCC: 3 | RNVC: 2

12 May 2023

5340-01-705-8185
Latch Bar

017058185
61066-00126-1: RNCC: 3 | RNVC: 2
61066-00126: RNCC: D | RNVC: 9

14 Oct 2022

5340-01-705-8042
Block Clamp

017058042
NGC500EG-4C1: RNCC: 3 | RNVC: 2
NGC500EG-4C1: RNCC: 5 | RNVC: 2
NGC500EG-4C1: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

13 Oct 2022

5340-01-706-9166
Loop Clamp

017069166
7082428: RNCC: 3 | RNVC: 2

3 Jan 2023

5340-01-706-9054
Double Angle Bracket

017069054
17P2C1169-505: RNCC: 3 | RNVC: 2

31 Dec 2022

5340-01-706-9025
Butt Hinge

017069025
17-60533: RNCC: 3 | RNVC: 2

30 Dec 2022

5340-01-707-0338
Spacing Threaded Standoff

017070338
4519-440SS20: RNCC: 3 | RNVC: 2
5915626-8: RNCC: 5 | RNVC: 9

10 Jan 2023

5340-01-705-7891
Utility Access Door

017057891
0201346: RNCC: 3 | RNVC: 2
11B5091154: RNCC: 7 | RNVC: 2

13 Oct 2022

5340-01-706-8417
Mounting Bracket

017068417
62517-1: RNCC: 3 | RNVC: 2

22 Dec 2022

5340-01-705-7208
Section Block Clamp

017057208
NGC500EG-4B22: RNCC: 3 | RNVC: 2
NGC500EG-4B22: RNCC: 5 | RNVC: 2
NGC500EG-4B22: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

6 Oct 2022

5340-01-706-8289
Double Angle Bracket

017068289
11B091987: RNCC: 3 | RNVC: 2

21 Dec 2022

5340-01-708-7223
Mounting Bracket

017087223
2018E0173: RNCC: 3 | RNVC: 2

19 Apr 2023

5340-01-706-7930
Blank Panel

017067930
5915626-25: RNCC: 3 | RNVC: 2
153-20738-03: RNCC: 5 | RNVC: 2

19 Dec 2022

5340-01-706-7895
Mounting Bracket

017067895
SCOUT-81011-002: RNCC: 3 | RNVC: 2
SCOUT-81011-002: RNCC: 7 | RNVC: 2
SCOUT-81011: RNCC: D | RNVC: 9

19 Dec 2022

5340-01-708-2403
Mounting Bracket

017082403
438-9020: RNCC: 3 | RNVC: 2
438-9020 ICD: RNCC: 7 | RNVC: 2

24 Mar 2023

5340-01-706-6602
Webbing Strap

017066602
603142: RNCC: 1 | RNVC: 2
603142: RNCC: 3 | RNVC: 2

12 Dec 2022

5340-01-698-7825
Electronic Equipment Hardware Kit

016987825
400-0560: RNCC: 3 | RNVC: 2
101-B-7052-03ID05,06: RNCC: 5 | RNVC: 9

8 Dec 2021

5340-01-705-4743
Arched Cushion

017054743
TMS-3781-3: RNCC: 3 | RNVC: 2

21 Sep 2022

5340-01-708-3119
Mounting Bracket

017083119
A1-55216D: RNCC: 3 | RNVC: 2

29 Mar 2023

5340-01-706-7137
Angle Bracket

017067137
1TD1342D20102-4005: RNCC: 3 | RNVC: 2

14 Dec 2022

5340-01-708-4523
Manual Control Handle

017084523
4213AS0111-1: RNCC: 1 | RNVC: 2
2001701: RNCC: 3 | RNVC: 2
39906: RNCC: 3 | RNVC: 2
65115K43: RNCC: 5 | RNVC: 2
4213AS0111: RNCC: D | RNVC: 9

6 Apr 2023

5340-01-706-6370
Angle Bracket

017066370
78201-02512-101: RNCC: 3 | RNVC: 2
78201-02512: RNCC: 5 | RNVC: 2

9 Dec 2022

5340-01-706-6083
Mounting Plate

017066083
7377664: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-708-2085
Webbing Strap

017082085
M01A-PPPL-SPCB-1012-RD: RNCC: 3 | RNVC: 2

22 Mar 2023

5340-01-705-6293
Nut And Bolt Retainer

017056293
L1700234-013: RNCC: 3 | RNVC: 2
L1700234: RNCC: D | RNVC: 9

29 Sep 2022

5340-01-706-5737
Bumper

017065737
13107426: RNCC: 3 | RNVC: 2

6 Dec 2022

5340-01-706-5710
Bumper

017065710
667752-1: RNCC: 3 | RNVC: 2
BRP38562: RNCC: 3 | RNVC: 2
667752-1: RNCC: 5 | RNVC: 9
202239504: RNCC: 7 | RNVC: 2

6 Dec 2022

5340-01-705-5137
Bumper

017055137
ST4-077-01: RNCC: 3 | RNVC: 2
ST4-077-01: RNCC: 5 | RNVC: 9

23 Sep 2022

5340-01-708-1002
Mounting Bracket

017081002
Z22-430-0325: RNCC: 3 | RNVC: 2

15 Mar 2023

5340-01-709-0408
Mounting Bracket

017090408
504-8911654-01: RNCC: 3 | RNVC: 2
504-8911654-01: RNCC: 5 | RNVC: 2
NSWCCD-61-TD-2020/2 REV A: RNCC: D | RNVC: 9

8 May 2023

5340-01-706-7788
Retaining Clip

017067788
7082406: RNCC: 3 | RNVC: 2

17 Dec 2022

5340-01-705-6750
Sliding Door Track

017056750
1061A-01-22-8: RNCC: 3 | RNVC: 2

4 Oct 2022

5340-01-035-9273
Spring Tension Clip

010359273
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B024-05C: RNCC: 3 | RNVC: 2

17 Feb 1977

5340-01-705-6594
Utility Access Door

017056594
5-13-10976-1: RNCC: 3 | RNVC: 2

3 Oct 2022

5340-01-708-5982
Mounting Bracket

017085982
M311-3393: RNCC: 3 | RNVC: 2

12 Apr 2023

5340-01-708-5223
Mounting Bracket

017085223
12486484: RNCC: 3 | RNVC: 2

12 Apr 2023

5340-01-705-6452
Mounting Bracket

017056452
HR6-200-B: RNCC: 3 | RNVC: 2

30 Sep 2022

5340-01-706-7296
Retaining Clip

017067296
62102-1: RNCC: 3 | RNVC: 2

15 Dec 2022

5340-01-705-9238
Catch Strike

017059238
HD-3232: RNCC: 3 | RNVC: 2
5613-638-001 REVI SH9 ITEM # 9A: RNCC: 5 | RNVC: 9
5613-638-001: RNCC: D | RNVC: 9

21 Oct 2022

5340-01-705-7749
Access Cover

017057749
12638667: RNCC: 3 | RNVC: 2

12 Oct 2022

5340-01-706-8877
Cushioning Pad

017068877
12193-1701-01: RNCC: 3 | RNVC: 2
12193-1701: RNCC: D | RNVC: 9

29 Dec 2022

5340-01-706-8830
Loop Clamp

017068830
830WPH12B: RNCC: 3 | RNVC: 2
S79WPLHT12: RNCC: 5 | RNVC: 2

28 Dec 2022

5340-01-706-8770
Manual Control Lever

017068770
381-261-201: RNCC: 3 | RNVC: 2

28 Dec 2022

5340-01-705-7659
Loop Clamp

017057659
9NG0012D4NB: RNCC: 3 | RNVC: 2
40005D4Y: RNCC: 5 | RNVC: 2
TA0220055DC4NB: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

11 Oct 2022

5340-01-705-7556
Mounting Plate

017057556
8245803-1: RNCC: 3 | RNVC: 2
FSU-4401PD: RNCC: 5 | RNVC: 2
8245803: RNCC: D | RNVC: 9

11 Oct 2022

5340-01-705-7396
Latch Bar

017057396
1441A34: RNCC: 3 | RNVC: 2
11B5091250: RNCC: 7 | RNVC: 2

7 Oct 2022

5340-01-706-8483
Utility Resilient Mount

017068483
5450115: RNCC: 3 | RNVC: 2

22 Dec 2022

5340-01-705-6979
Access Cover

017056979
5-13-10849-1: RNCC: 3 | RNVC: 2
5-13-10849: RNCC: D | RNVC: 9

5 Oct 2022

5340-01-706-0151
Access Cover

017060151
12638668: RNCC: 3 | RNVC: 2

25 Oct 2022

5340-01-707-0759
Access Cover

017070759
12638740-T: RNCC: 3 | RNVC: 2

13 Jan 2023

5340-01-707-1099
Loop Clamp

017071099
9NG0012H32F: RNCC: 3 | RNVC: 2
TA0220055HO32FK: RNCC: 5 | RNVC: 2
40005SS32FS: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

17 Jan 2023

5340-01-707-0695
Electronic Equipment Hardware Kit

017070695
12618110: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-707-0682
Angle Bracket

017070682
SRPV2200388-103: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-707-0608
Loop Clamp

017070608
9NG0012H31F: RNCC: 3 | RNVC: 2
40005SS31FS: RNCC: 5 | RNVC: 2
TA0220055HO31FK: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

12 Jan 2023

5340-01-707-0467
Cover Strip

017070467
13102609-2: RNCC: 3 | RNVC: 2
13102609: RNCC: D | RNVC: 9

11 Jan 2023

5340-01-707-0437
Mounting Bracket

017070437
326P1S5315-201: RNCC: 3 | RNVC: 2

11 Jan 2023

5340-01-707-0430
Shelf Bracket

017070430
1001N118: RNCC: 3 | RNVC: 1

11 Jan 2023

5340-01-708-0324
Mounting Bracket

017080324
8M0142676: RNCC: 3 | RNVC: 2

11 Mar 2023

5340-01-705-9294
Mounting Plate

017059294
12611443: RNCC: 3 | RNVC: 2
12611443: RNCC: 5 | RNVC: 2

21 Oct 2022

5340-01-705-9987
Retaining Strap

017059987
4936A15H01: RNCC: 3 | RNVC: 1

24 Oct 2022

5340-01-707-1228
Handwheel

017071228
108347: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-706-0739
Vent Plug

017060739
AP7952W04: RNCC: 3 | RNVC: 2

28 Oct 2022

5340-01-707-1928
Loop Clamp

017071928
9NG0012D6NB: RNCC: 3 | RNVC: 2
TA00220055DC6NB: RNCC: 5 | RNVC: 2
40005D6Y: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

20 Jan 2023

5340-01-707-1864
Angle Bracket

017071864
326P1S0639-103: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-706-0306
Mounting Plate

017060306
801-8617176 PN NO.77: RNCC: 3 | RNVC: 2
801-8617176: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-707-2564
Winch Saddle

017072564
13071338: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-706-1439
Vehicle Cargo Tie Down

017061439
12609525: RNCC: 3 | RNVC: 2
12609525: RNCC: 5 | RNVC: 9

3 Nov 2022

5340-01-706-1219
Mounting Plate

017061219
12638875: RNCC: 3 | RNVC: 2

2 Nov 2022

5340-01-707-2326
Mechanical Stop

017072326
OFB-2061-A1: RNCC: 3 | RNVC: 2

24 Jan 2023

5340-01-706-1009
Loop Clamp

017061009
4236456: RNCC: 3 | RNVC: 2

1 Nov 2022

5340-01-707-3560
Locking Stay

017073560
03002B7821-1: RNCC: 3 | RNVC: 2
03002B7821: RNCC: D | RNVC: 9

28 Jan 2023

5340-01-706-2068
Retaining Strap

017062068
22C2806-2: RNCC: 3 | RNVC: 2

8 Nov 2022

5340-01-706-1835
Mounting Bracket

017061835
12666778: RNCC: 3 | RNVC: 2

7 Nov 2022

5340-01-707-3281
Mounting Bracket

017073281
402-0179: RNCC: 3 | RNVC: 2

27 Jan 2023

5340-01-706-1658
Angle Bracket

017061658
12680569: RNCC: 3 | RNVC: 2
12680571 FIND 12: RNCC: C | RNVC: 1
12680571: RNCC: D | RNVC: 9

4 Nov 2022

5340-01-707-3337
Cushioning Pad

017073337
12193-3452-01: RNCC: 3 | RNVC: 2

27 Jan 2023

5340-01-706-1578
Mounting Bracket

017061578
3361968-12: RNCC: 3 | RNVC: 2
3361968: RNCC: D | RNVC: 9

4 Nov 2022

5340-01-707-2807
Webbing Strap

017072807
ED3X24IN: RNCC: 3 | RNVC: 2
13071350: RNCC: 7 | RNVC: 2

25 Jan 2023

5340-01-707-2765
Mounting Bracket

017072765
26169800029: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-707-6516
Cushioning Pad

017076516
12582101-102: RNCC: 3 | RNVC: 2
12582100: RNCC: D | RNVC: 9
12582101: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-707-3939
Synchro Clamp

017073939
5144336-686: RNCC: 3 | RNVC: 2
5144336: RNCC: D | RNVC: 9

31 Jan 2023

5340-01-707-5252
Dust And Moisture Seal Protective Cover

017075252
HAN 700-1: RNCC: 3 | RNVC: 2

7 Feb 2023

5340-01-706-3001
Cushioning Pad

017063001
B003310M05076-0049: RNCC: 3 | RNVC: 2

15 Nov 2022

5340-01-707-4728
Mounting Plate

017074728
114-1389-3: RNCC: 3 | RNVC: 2

3 Feb 2023

5340-01-707-4673
Angle Bracket

017074673
3890AS005118-01: RNCC: 3 | RNVC: 2
3890AS005118-01: RNCC: 5 | RNVC: 2
3890AS005118-01: RNCC: 5 | RNVC: 2

3 Feb 2023

5340-01-707-4310
Mounting Bracket

017074310
53-30255: RNCC: 3 | RNVC: 2
17002-FIND NUMBER 16: RNCC: 5 | RNVC: 1
17002: RNCC: D | RNVC: 9

1 Feb 2023

5340-01-706-3488
Handle Grip

017063488
12638782: RNCC: 3 | RNVC: 2

17 Nov 2022

5340-01-707-3945
Dust And Moisture Seal Protective Plug

017073945
421912660071: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-625-2036
Detent Plunger

016252036
11582689: RNCC: 3 | RNVC: 2
11582690: RNCC: 3 | RNVC: 9
777.21.037: RNCC: 5 | RNVC: 2

28 Jan 2014

5340-01-706-2828
Lock Key

017062828
N13EZ: RNCC: 3 | RNVC: 2

14 Nov 2022

5340-01-706-2356
Mechanical Stop

017062356
12611228: RNCC: 3 | RNVC: 2
12611228: RNCC: 5 | RNVC: 9

9 Nov 2022

5340-01-706-2326
Access Cover

017062326
12638756: RNCC: 3 | RNVC: 2

9 Nov 2022

5340-01-707-5810
Helical Compression Spring Retainer

017075810
2963238-101: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-707-5609
Access Cover

017075609
RRM000297963: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-707-5576
Loop Clamp

017075576
119574-13300: RNCC: 3 | RNVC: 2
370-119574-13300: RNCC: 5 | RNVC: 2

9 Feb 2023

5340-01-706-3330
Spacing Threaded Standoff

017063330
CB3001CRA3-20HP: RNCC: 3 | RNVC: 2
CB3001: RNCC: D | RNVC: 9

16 Nov 2022

5340-01-706-3325
Angle Bracket

017063325
B003310M05076-0039: RNCC: 3 | RNVC: 2
B003310M05076 PL: RNCC: D | RNVC: 9

16 Nov 2022

5340-01-706-3308
Access Cover

017063308
4106AS0102-1: RNCC: 3 | RNVC: 2
4106AS0102-1: RNCC: 5 | RNVC: 2
4106AS0102: RNCC: D | RNVC: 9

16 Nov 2022

5340-01-706-4358
Mounting Plate

017064358
12685041: RNCC: 3 | RNVC: 2
12685041: RNCC: 5 | RNVC: 2

23 Nov 2022

5340-01-706-3652
Bumper

017063652
92167661: RNCC: 3 | RNVC: 2
1421T2GY: RNCC: 5 | RNVC: 2

18 Nov 2022

5340-01-706-3659
Cushioning Pad

017063659
5-19-14810-001: RNCC: 3 | RNVC: 2
104588-005: RNCC: 5 | RNVC: 2

18 Nov 2022

5340-01-707-6568
Mounting Plate

017076568
5HL11309-111: RNCC: 3 | RNVC: 2

14 Feb 2023

5340-01-706-4162
Mounting Plate

017064162
FF5-500-004: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-707-7016
Clamping Catch Fastener

017077016
488041: RNCC: 3 | RNVC: 2

16 Feb 2023

5340-01-706-3779
Dust And Moisture Seal Protective Cover

017063779
88286: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-706-3690
Loop Clamp

017063690
ST9M588WDF42: RNCC: 3 | RNVC: 2
JM44LC28WD42YN: RNCC: 5 | RNVC: 2
TA0220060WNB42: RNCC: 5 | RNVC: 2
S663WDF42: RNCC: 5 | RNVC: 2

18 Nov 2022

5340-01-707-6839
Access Cover

017076839
988-9731-001: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-706-3780
Dust And Moisture Seal Protective Cover

017063780
88285: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-706-4222
Mounting Plate

017064222
PAA1013926: RNCC: 3 | RNVC: 2
DAAK018463 REV SEQ 041: RNCC: C | RNVC: 1
DAAK018463: RNCC: D | RNVC: 9

22 Nov 2022

5340-01-707-6882
Mounting Bracket

017076882
5-13-10424-1: RNCC: 3 | RNVC: 2

16 Feb 2023

5340-01-706-3810
Pivot Cap

017063810
1544305: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-707-6745
Mounting Bracket

017076745
101538: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-702-6480
Access Cover

017026480
L3053624-007: RNCC: 3 | RNVC: 2
L3053624: RNCC: D | RNVC: 9

19 Jul 2022

5340-01-706-4733
Dust And Moisture Seal Protective Plug

017064733
5413074: RNCC: 3 | RNVC: 2

29 Nov 2022

5340-01-700-6539
Aircraft Latch Hook

017006539
901-060-818-104: RNCC: 3 | RNVC: 2
PL901-060-818-104: RNCC: D | RNVC: 9

5 Apr 2022

5340-01-707-8581
Section Block Clamp

017078581
563-7070228-40: RNCC: 3 | RNVC: 2
H696-1604-40: RNCC: C | RNVC: 1
563-7070228: RNCC: D | RNVC: 9

27 Feb 2023

5340-01-706-4994
Remote Plug

017064994
13107481: RNCC: 1 | RNVC: 2
SPR-12591: RNCC: 3 | RNVC: 2
SPR-02213: RNCC: 5 | RNVC: 9

30 Nov 2022

5340-01-707-8211
Antipilferage Seal

017078211
563-7067897-87: RNCC: 3 | RNVC: 2
H696-1603-87: RNCC: 5 | RNVC: 2
7067897: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-707-8509
Cushioning Pad

017078509
13101362: RNCC: 3 | RNVC: 2
8456K35: RNCC: 5 | RNVC: 2

25 Feb 2023

5340-01-705-4032
Mounting Bracket

017054032
12604831: RNCC: 3 | RNVC: 2

19 Sep 2022

5340-01-707-9469
Dust And Moisture Seal Protective Cap Set

017079469
40349A: RNCC: 3 | RNVC: 2

6 Mar 2023

5340-01-706-5308
Dust And Moisture Seal Protective Cap

017065308
D02-180A: RNCC: 3 | RNVC: 2
04307351: RNCC: D | RNVC: 9

5 Dec 2022

5340-01-485-7283
Angle Bracket

014857283
12437408-1: RNCC: 3 | RNVC: 2
12437450-10: RNCC: 5 | RNVC: 2
12437408: RNCC: 5 | RNVC: 2

5 Jun 2001

5340-01-699-3592
Dust And Moisture Seal Protective Cap

016993592
38433-1: RNCC: 3 | RNVC: 2

26 Jan 2022

5340-01-693-3817
Loop Clamp

016933817
19838-263-Z: RNCC: 3 | RNVC: 2
LE127-0012-0250: RNCC: 7 | RNVC: 2

9 Feb 2021

5340-01-158-1169
Loop Clamp

011581169
MS21106-26: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

18 Jul 1983

5340-00-229-4245
Butt Hinge

002294245
MS27956-48: RNCC: 2 | RNVC: 2
MS27956: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-143-5171
Butt Hinge

011435171
MS20001C12-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

6 Dec 1982

5340-00-933-6950
Mounting Bracket

009336950
10932346: RNCC: 3 | RNVC: 2
2510009336950: RNCC: 5 | RNVC: 9

21 Sep 1966

5340-01-155-4499
Loop Clamp

011554499
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT4SW: RNCC: 3 | RNVC: 2

9 Jun 1983

5340-01-228-1485
Electrical-Mechanical Equipment Post

012281485
NAS1829: RNCC: 3 | RNVC: 1
NAS1829-3A16: RNCC: 3 | RNVC: 2

14 Mar 1986

5340-01-628-2807
Butt Hinge

016282807
A-A-55591-7A X 16.00: RNCC: 2 | RNVC: 2
AA55591-7A X 16.00: RNCC: 2 | RNVC: 2
A-A-55591: RNCC: 4 | RNVC: 1
06A8127403: RNCC: 5 | RNVC: 1

16 May 2014

5340-01-632-5699
Loop Clamp

016325699
NAS1714: RNCC: 3 | RNVC: 1
NAS1714C2-10SW: RNCC: 3 | RNVC: 2

23 Oct 2014

5340-01-631-9272
Butt Hinge Leaf

016319272
MS20001HA6-1840: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001HA6-1840: RNCC: 5 | RNVC: 1

1 Oct 2014

5340-01-089-7438
Loop Clamp

010897438
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D12N: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-01-579-6847
Loop Clamp

015796847
6Y9281: RNCC: 3 | RNVC: 2
6Y-9281: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-01-573-2248
Loop Clamp

015732248
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735DC14: RNCC: 3 | RNVC: 2
AN735DC14: RNCC: 3 | RNVC: 9

13 Apr 2009

5340-01-470-2978
Dust And Moisture Seal Protective Cap

014702978
NAS847: RNCC: 3 | RNVC: 1
NAS847TYPE4CLASSASIZE12: RNCC: 3 | RNVC: 2
MIL-C-5501TYPE4CLASSASIZE12: RNCC: 5 | RNVC: 9
NAS847TYPE4CLASSASIZE12: RNCC: 5 | RNVC: 9
M5501/4-12: RNCC: 5 | RNVC: 9

14 Dec 1999

5340-01-579-0779
Double Angle Bracket

015790779
6Y5113: RNCC: 3 | RNVC: 2
6Y-5113: RNCC: 5 | RNVC: 2

29 Oct 2009

5340-01-689-8989
Mounting Bracket

016898989
GMK-D-PDD2P-A: RNCC: 3 | RNVC: 2
GMK-DDD2P-A: RNCC: 3 | RNVC: 9

16 Jul 2020

5340-01-687-2490
Loop Clamp

016872490
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D9-24N: RNCC: 3 | RNVC: 2

24 Mar 2020

5340-01-581-5309
Retaining Strap

015815309
8E7791: RNCC: 3 | RNVC: 2
8E-7791: RNCC: 5 | RNVC: 2

20 Jan 2010

5340-01-698-2786
Mounting Bracket

016982786
8600200-03-001: RNCC: 3 | RNVC: 2

5 Nov 2021

5340-01-692-2480
Composite Shaft

016922480
1W26M00005-A: RNCC: 3 | RNVC: 2
1806700009 REV 2 IT 6: RNCC: 5 | RNVC: 2
1W2600005-A REV -: RNCC: D | RNVC: 9
1806700011 REV 02 ITEM 6: RNCC: D | RNVC: 9

2 Dec 2020

5340-01-698-2446
Access Cover

016982446
X01376: RNCC: 3 | RNVC: 2

4 Nov 2021

5340-01-698-3136
Electronic Equipment Hardware Kit

016983136
9100-0020: RNCC: 3 | RNVC: 2

9 Nov 2021

5340-01-554-7651
Dust And Moisture Seal Protective Cover

015547651
188622P1: RNCC: 3 | RNVC: 2

17 Aug 2007

5340-01-549-4501
Loop Clamp

015494501
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587C08: RNCC: 3 | RNVC: 2
AS5587C08: RNCC: 3 | RNVC: 9

21 Mar 2007

5340-01-692-0266
Retaining Strap

016920266
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C21W60N: RNCC: 3 | RNVC: 2

13 Nov 2020

5340-01-692-0248
Retaining Strap

016920248
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C25W38N: RNCC: 3 | RNVC: 2

13 Nov 2020

5340-01-707-6095
Luggage Lock

017076095
1050271: RNCC: 3 | RNVC: 2

11 Feb 2023

5340-01-706-9034
Mounting Bracket

017069034
N000065L030A: RNCC: 3 | RNVC: 2

30 Dec 2022

5340-01-706-8857
Rod End Locking Retainer

017068857
NAS1193E5-1: RNCC: 3 | RNVC: 2

29 Dec 2022

5340-01-706-8207
Rim Latch

017068207
R4-99-1247: RNCC: 3 | RNVC: 2

21 Dec 2022

5340-01-706-7863
Mounting Bracket

017067863
8M0057721: RNCC: 3 | RNVC: 2

19 Dec 2022

5340-01-707-4819
Dust And Moisture Seal Protective Cap

017074819
97003540: RNCC: 3 | RNVC: 2

4 Feb 2023

5340-01-706-4333
Mounting Bracket

017064333
277-1123-501: RNCC: 3 | RNVC: 2

23 Nov 2022

5340-01-706-5409
Mounting Bracket

017065409
293-9452: RNCC: 3 | RNVC: 2
A08690: RNCC: 5 | RNVC: 2

5 Dec 2022

5340-01-706-3300
Loop Clamp

017063300
LH30337-17: RNCC: 3 | RNVC: 2

16 Nov 2022

5340-01-706-2803
Mounting Bracket

017062803
2043365: RNCC: 3 | RNVC: 2
10472457: RNCC: 6 | RNVC: 9

14 Nov 2022

5340-01-706-7097
Mounting Bracket

017067097
596-4307: RNCC: 3 | RNVC: 2

14 Dec 2022

5340-01-706-6199
Mounting Bracket

017066199
580-5855: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-706-6115
Mounting Bracket

017066115
579-3853: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-706-5991
Angle Bracket

017065991
588-6053: RNCC: 3 | RNVC: 2

7 Dec 2022

5340-01-705-4661
Clamping Catch

017054661
8240436: RNCC: 3 | RNVC: 2

21 Sep 2022

5340-01-705-4839
Sealing Plug Assembly

017054839
01N19833-187: RNCC: 3 | RNVC: 2

21 Sep 2022

5340-01-706-0117
Spacing Threaded Standoff

017060117
CB4002V08CR8: RNCC: 3 | RNVC: 2
CB4002 REV 5: RNCC: D | RNVC: 9

25 Oct 2022

5340-01-705-8479
Dust And Moisture Seal Protective Cap

017058479
EC311: RNCC: 3 | RNVC: 2
042000: RNCC: 5 | RNVC: 2

17 Oct 2022

5340-01-707-2138
Valve Locking Device

017072138
S3477: RNCC: 3 | RNVC: 2
S3477: RNCC: 5 | RNVC: 2

23 Jan 2023

5340-01-705-7507
Loop Clamp

017057507
1508M75P01: RNCC: 3 | RNVC: 2

7 Oct 2022

5340-01-705-5487
Mounting Bracket

017055487
LH10933-02: RNCC: 3 | RNVC: 2

26 Sep 2022

5340-01-697-7079
Webbing Strap

016977079
12340517-3: RNCC: 3 | RNVC: 2
12340517: RNCC: D | RNVC: 9

6 Oct 2021

5340-01-697-8657
Mounting Bracket

016978657
3000642140: RNCC: 3 | RNVC: 2

15 Oct 2021

5340-01-697-8668
Access Cover

016978668
HC3Z-4033-B: RNCC: 3 | RNVC: 9
LC3Z-4033-C: RNCC: 5 | RNVC: 2
HC3Z-4033-B: RNCC: 5 | RNVC: 9

15 Oct 2021

5340-01-697-9213
Seal Retaining Plate

016979213
1020609-2: RNCC: 3 | RNVC: 2

19 Oct 2021

5340-01-697-8622
Loop Clamp

016978622
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D25-40N: RNCC: 3 | RNVC: 2

15 Oct 2021

5340-01-697-7633
Mounting Bracket

016977633
540-0325: RNCC: 3 | RNVC: 2

8 Oct 2021

5340-01-697-6735
Angle Bracket

016976735
4530755: RNCC: 3 | RNVC: 2

4 Oct 2021

5340-01-697-7107
Loop Clamp

016977107
30-302-2D07J13: RNCC: 1 | RNVC: 2
30-302-2D07J13: RNCC: 3 | RNVC: 2
30-302-2D07J13: RNCC: 3 | RNVC: 2
30-302-2D07J13: RNCC: 3 | RNVC: 2
30-302-2D07J13: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

6 Oct 2021

5340-01-697-6829
Dust And Moisture Seal Protective Cap

016976829
SAE-AS85720: RNCC: 3 | RNVC: 1
AS8439T04: RNCC: 3 | RNVC: 2

4 Oct 2021

5340-01-707-7996
Corrosion Preventive Anode

017077996
865182A02: RNCC: 3 | RNVC: 2

23 Feb 2023

5340-01-707-7994
Corrosion Preventive Anode

017077994
762144: RNCC: 3 | RNVC: 2

23 Feb 2023

5340-01-698-0500
Loop Clamp

016980500
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCG13Y: RNCC: 3 | RNVC: 2

26 Oct 2021

5340-01-698-0136
Mounting Bracket

016980136
363-7494: RNCC: 3 | RNVC: 2

22 Oct 2021

5340-01-698-0145
Mounting Plate

016980145
356-8327: RNCC: 3 | RNVC: 2

22 Oct 2021

5340-01-697-9875
Bumper

016979875
1075752: RNCC: 3 | RNVC: 2

21 Oct 2021

5340-01-698-0778
Removable Spark Box Door

016980778
197K2283-100: RNCC: 3 | RNVC: 2
197K2283-100: RNCC: 5 | RNVC: 9

27 Oct 2021

5340-01-705-4042
Vent Plug

017054042
4811-160-3: RNCC: 3 | RNVC: 2

19 Sep 2022

5340-01-707-8532
Flush Catch

017078532
3338400-105: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-698-1516
Access Cover

016981516
197K2369-100: RNCC: 3 | RNVC: 2
197K2369-100: RNCC: 5 | RNVC: 9

1 Nov 2021

5340-01-697-9816
Winch Blanket

016979816
H46-HB-WDB: RNCC: 3 | RNVC: 2

21 Oct 2021

5340-01-707-1893
Loop Clamp

017071893
TA02213C016HD: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-698-2204
Synchro Clamp

016982204
70700-20308-104: RNCC: 3 | RNVC: 2

3 Nov 2021

5340-01-708-1515
Leather Strap

017081515
S-23086-5: RNCC: 3 | RNVC: 2

17 Mar 2023

5340-01-708-0253
Utility Resilient Mount

017080253
WR16-806-06-CM: RNCC: 3 | RNVC: 2

10 Mar 2023

Load More Results