What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 97 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 97 of 368

5340-99-738-4864
Protective Cap-Plug

997384864
EN8384490: RNCC: 3 | RNVC: 2
FJ970AY0001: RNCC: 6 | RNVC: 9

25 Mar 1997

5340-99-742-8641
Mounting Plate

997428641
ND38197: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-99-741-4288
Line Supporting Strap

997414288
B73410: RNCC: 1 | RNVC: 2
PSAS2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-800-7931

5340-99-800-1134

5340-99-818-5964

5340-99-820-6971
Spacerscrewed

5340-99-811-1920
Service Kit

998111920
SR1383/8: RNCC: 3 | RNVC: 2
245-97/8: RNCC: 6 | RNVC: 9
K766: RNCC: 6 | RNVC: 9

17 Oct 1997

5340-99-720-8658
Multiple Angle Bracket

997208658
5384A-1: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-99-664-9789
Mounting Bracket

996649789
AL101605: RNCC: 3 | RNVC: 2
XA011120001: RNCC: 6 | RNVC: 9

2 May 2001

5340-99-397-5742
Angle Bracket

993975742
FV2280634: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-99-398-7137
Electrical-Mec Post

993987137
3P228621: RNCC: 3 | RNVC: 2
8002078A00: RNCC: 5 | RNVC: 2
P228621: RNCC: 5 | RNVC: 2

13 Jun 1996

5340-99-214-2221

5340-99-545-4182
Rubber Bumper

5340-99-545-4404

5340-99-390-9722
Dust And Moisture Seal Boot

993909722
NKA791: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-228-3879
Mounting Bracket

992283879
94748: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-99-667-9149
Mounting Plate

996679149
402-450-002: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-99-720-3364
Butt Hinge

997203364
110018-4824R: RNCC: 3 | RNVC: 2
110018/4824R: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-989-6299
Angle Bracket

999896299
509278/004: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-99-687-2297
Adjustable Plate

996872297
EU0905G012-275: RNCC: 3 | RNVC: 2
06241-113: RNCC: 6 | RNVC: 9

22 Mar 2006

5340-99-615-3424
Retaining Strap

996153424
KB290K0032-144: RNCC: 3 | RNVC: 2
KB290K0032-144: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-152-6295
Mounting Bracket

991526295
NC9900-010-041: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-99-711-5713
Retaining Ring

997115713
DHS1729J: RNCC: 3 | RNVC: 2
26TD6695: RNCC: 6 | RNVC: 9
26TD-6695: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-5120
Bow Handle

996475120
247801-1018: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-202-8174
General Purpose Resilient Mount

992028174
31-322: RNCC: 3 | RNVC: 2
AS30205: RNCC: 5 | RNVC: 2
3024808: RNCC: 5 | RNVC: 2
259-84202: RNCC: 5 | RNVC: 2
275364: RNCC: 5 | RNVC: 2
HLN1033ITEM257: RNCC: 5 | RNVC: 2
TY15477: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-213-5331
Access Cover

992135331
NO PRIMARY REF 99-213-5331: RNCC: 3 | RNVC: 2
4KB-2628F-10: RNCC: 5 | RNVC: 2

9 Sep 2010

5340-99-958-0821
Protective Cover

999580821
NO PRIMARY REF 99-958-0821: RNCC: 3 | RNVC: 2
HSD 1004314-D9: RNCC: 5 | RNVC: 2
78JB142: RNCC: 6 | RNVC: 9

13 Aug 2005

5340-99-615-2499
Retaining Strap

996152499
KB290K0244-002: RNCC: 3 | RNVC: 2
KB290K0244-002: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-197-0991
Tank Clamp Ring

991970991
1527554-101: RNCC: 3 | RNVC: 2
1527554-101: RNCC: 5 | RNVC: 2

4 Apr 1995

5340-99-763-0332
Angle Bracket

997630332
WB5-84-6397: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-760-5472
Butt Hinge

997605472
K145-10-2289: RNCC: 3 | RNVC: 2

22 Feb 1983

5340-99-796-6164
Spring Loaded Cylinder Fastener

997966164
NO PRIMARY REF 99-796-6164: RNCC: 3 | RNVC: 2
MRC9995: RNCC: 5 | RNVC: 2
MRC9995: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-558-7524
Handwheel

995587524
SS01S3001-111: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-420-1710
Retaining Strap

994201710
SDA172624: RNCC: 3 | RNVC: 2
SDA172624: RNCC: 5 | RNVC: 9
Z1ZA53404: RNCC: 6 | RNVC: 9
G1-53404: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-277-5300
Multiple Angle Bracket

992775300
0693D06002-041: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-99-794-3975
Cushioning Pad

997943975
271Y51003307: RNCC: 3 | RNVC: 2
27-14510-03307: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-798-5191
Retaining Strap

997985191
HC923H0531-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-818-9977
Clamping Catch

998189977
71-2573SS: RNCC: 3 | RNVC: 2
552650: RNCC: 5 | RNVC: 2
552650: RNCC: 5 | RNVC: 2

19 Apr 2012

5340-99-840-5101
Mounting Bracket

998405101
FV2282910: RNCC: 3 | RNVC: 2
0748Q-005: RNCC: 6 | RNVC: 9

20 Aug 2007

5340-99-165-6177
Access Cover

991656177
110153-963: RNCC: 3 | RNVC: 2
26VC-16832: RNCC: 6 | RNVC: 9

3 Apr 2002

5340-99-833-0824
Dust And Moisture Seal Protective Cap

998330824
WG1382-8206-101: RNCC: 3 | RNVC: 2

21 Mar 2002

5340-99-430-5758
Ring

994305758
NO PRIMARY REF 99-430-5758: RNCC: 3 | RNVC: 2
ED30112-615: RNCC: 5 | RNVC: 2
88101-100-351: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-301-2128
Bonded Seal

993012128
Y2816/PA: RNCC: 3 | RNVC: 2

12 Dec 1994

5340-99-894-1402
Drain Plug

998941402
SR1404/4: RNCC: 3 | RNVC: 2
0017-95/14: RNCC: 6 | RNVC: 9
0046: RNCC: 6 | RNVC: 9

4 Dec 1997

5340-99-914-6801
Retaining Clip

999146801
MD18: RNCC: 3 | RNVC: 2
11256-3: RNCC: 5 | RNVC: 2
MD18: RNCC: 5 | RNVC: 2
SC80238: RNCC: 5 | RNVC: 2
P200957-3: RNCC: 5 | RNVC: 2
41681-024-0: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-619-6193
Assembled Nut Retainer

996196193
SM/G/05/1/71/44/6: RNCC: 3 | RNVC: 2
523-109: RNCC: 5 | RNVC: 2
GM-E-112921 ITEM 28: RNCC: 5 | RNVC: 2
MF.525001-5: RNCC: 5 | RNVC: 2
MP3298B: RNCC: 5 | RNVC: 2
2063-0051: RNCC: 5 | RNVC: 2
TT7776218: RNCC: 6 | RNVC: 9
989009484: RNCC: 6 | RNVC: 9
989009486: RNCC: 6 | RNVC: 9
7776218: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-291-6179
Loop Clamp

992916179
S005M08P: RNCC: 3 | RNVC: 2
80021412: RNCC: 5 | RNVC: 2
FV2289139/1: RNCC: 5 | RNVC: 2
0743J-0001: RNCC: 6 | RNVC: 9

3 Aug 2007

5340-99-870-0962
Angle Bracket

998700962
WG1381-8577-043: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-99-794-5837
Turnbuckle

997945837
100401-0403-ASY: RNCC: 3 | RNVC: 2
L79028: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-416-3614
Mounting Bracket

994163614
EA3-16-5025: RNCC: 3 | RNVC: 2
26FZ-34675: RNCC: 6 | RNVC: 9
34675: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-332-3031
Mounting Bracket

993323031
686/2/11505/000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-99-783-7267
Padlock

997837267
CES NKCS 04 3/1 1.1.1.39: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-99-616-5017
Manual Control Handle

996165017
K302214: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-99-766-8652
Retaining Strap

5340-99-767-2873
Dus Protective Plug

5340-99-119-0863
Electrical-Mec Post

5340-99-116-5329

5340-99-782-3589
Loop Clamp

5340-99-767-0382
Electrical-Mec Post

5340-99-182-3258
General Purpose Resilient Mount

991823258
48040611: RNCC: 3 | RNVC: 2
2500601014: RNCC: 5 | RNVC: 2

14 Jun 2011

5340-99-647-8142
Mounting Plate

996478142
9406531: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-454-0104
Absolute Filter

5340-99-513-6923
Mounting Bracket

5340-99-636-9211
Retaining Strap

996369211
EU54275: RNCC: 3 | RNVC: 2
36SN172: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-148-3209

5340-99-354-2844
Multiplexer

993542844
2400: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-99-834-8979
Mounting Bracket

998348979
7161730400: RNCC: 3 | RNVC: 2

23 Jan 2008

5340-99-825-5875
Loop Clamp

998255875
125983: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-938-2242
Mounting Bracket

999382242
LU10696: RNCC: 3 | RNVC: 2
36AE6348: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-835-8260
Dust And Moisture Seal Boot

998358260
82K3659: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-920-1012
Retaining Bol Plate

999201012
CU60049A: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-99-911-5289
Mechanic Equipment Hardware Kit

999115289
FV2307555: RNCC: 3 | RNVC: 2

5 May 2010

5340-99-826-2577
Angle Bracket

998262577
FV 801853: RNCC: 3 | RNVC: 2
CV1853: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-796-6664
Mounting Plate

997966664
MBEU161758: RNCC: 3 | RNVC: 2
MBEU161758: RNCC: 5 | RNVC: 2

23 May 2003

5340-99-804-3393
Manual Control Lever

998043393
FV 611449: RNCC: 3 | RNVC: 2
RE25850: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-793-2870
Webbing Strap

997932870
NHD800: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-804-4823
Spring Tension Clip

998044823
FV593120: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-3493
Dust And Moisture Seal Boot

998083493
E391GD2: RNCC: 3 | RNVC: 2

2 Feb 1981

5340-99-796-9099
Turnbuckle

997969099
32111: RNCC: 3 | RNVC: 2
B10391: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-152-3468
Mounting Bracket

991523468
80022499: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-99-829-1283
Spring Tension Clip

998291283
9179184: RNCC: 3 | RNVC: 2
79179184: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-826-4370
Bar Clamp

998264370
FV923362: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-7635
Mortise Latch

998237635
FV712701: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-1681
Expansion Plug

998261681
ST43376: RNCC: 3 | RNVC: 2
FV799646: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-830-7811
Catch Strike

998307811
FV 582042: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-3147
Harness Suppor Clip

998293147
FV728811: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-930-3407
Bracket Kit

999303407
SAW6557: RNCC: 3 | RNVC: 2
4649-643: RNCC: 6 | RNVC: 9

2 Mar 2012

5340-99-968-6771
Mounting Bracket

999686771
5292460: RNCC: 3 | RNVC: 2

13 May 2011

5340-99-968-6737
Bracket

999686737
M5755176420100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-968-1469
Plate

999681469
7220677: RNCC: 3 | RNVC: 2
FF9520L0162: RNCC: 6 | RNVC: 9

2 Jun 1995

5340-99-930-6951
Access Cover

999306951
27411: RNCC: 3 | RNVC: 2

3 Mar 1995

5340-99-969-4291
Mounting Bracket

999694291
FV 2184586: RNCC: 3 | RNVC: 2
FV 2184586: RNCC: 5 | RNVC: 2
FP982XH0033: RNCC: 6 | RNVC: 9

11 Jan 1999

5340-99-930-8070
Pipe Hanger

999308070
110003-23677: RNCC: 3 | RNVC: 2
26VC-6941: RNCC: 6 | RNVC: 9

13 Aug 2004

5340-99-967-8593
Mounting Bracket

999678593
A2N20453400: RNCC: 3 | RNVC: 2
FW0010H0095: RNCC: 6 | RNVC: 9

20 Jul 2000

5340-99-927-7207
General Purpose Resilient Mount

999277207
48040699: RNCC: 3 | RNVC: 2
2500599978: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-99-926-7868
Loop Clamp

999267868
FV 2268341: RNCC: 3 | RNVC: 2

16 Feb 2006

5340-99-924-2906
Mounting Bracket

999242906
FV 2180700: RNCC: 3 | RNVC: 2

14 Feb 1994

5340-99-934-6699
Mounting Bracket

999346699
FV 2026541: RNCC: 3 | RNVC: 2
FV 2026541: RNCC: 5 | RNVC: 2

4 Oct 1996

5340-99-930-5933
Barrel Bolt

999305933
20020305: RNCC: 3 | RNVC: 2
2002: RNCC: 5 | RNVC: 1
870015: RNCC: 5 | RNVC: 2

26 Aug 1992

5340-99-958-8270
Mounting Plate

999588270
AC143C142: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-99-925-9578
Retaining Strap

999259578
70-85-946: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-99-960-2067
Bumper

999602067
0S58446: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-902-2756
Loop Clamp

999022756
EF811A10: RNCC: 1 | RNVC: 2
11944PH10Y: RNCC: 3 | RNVC: 2
TA028M014NB10: RNCC: 3 | RNVC: 2
TA028M014NB10: RNCC: 5 | RNVC: 2
1ME7846: RNCC: 6 | RNVC: 9

28 Feb 1995

5340-99-958-1838
Mount Adapter

999581838
900-9094: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-99-958-5737
Bracket Assy

999585737
M5755339900000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-900-0439
Detent Plunger

999000439
RRA504625: RNCC: 3 | RNVC: 2
RRA504625: RNCC: 5 | RNVC: 2

23 Sep 1982

5340-99-958-2224
Adaptor

999582224
CC2131: RNCC: 3 | RNVC: 2

10 Aug 2007

5340-99-968-6733
Strip-Diverter

999686733
M5755151320000: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-99-968-6359
Access Cover

999686359
FV2285191: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-99-930-7144
Mounting Plate

999307144
FV 2185626: RNCC: 3 | RNVC: 2
FH954EF0001: RNCC: 6 | RNVC: 9

21 Aug 1995

5340-99-968-6574
Buckle

999686574
0650: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-99-958-7260
Butt Hinge

999587260
AP50042823: RNCC: 3 | RNVC: 2
5304.W050: RNCC: 5 | RNVC: 2

14 May 2012

5340-99-900-1216
Loop Clamp

999001216
RRA510095: RNCC: 3 | RNVC: 2
RRA510095: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-2448
Retaining Strap

999582448
8251949722: RNCC: 3 | RNVC: 2

4 Jan 2008

5340-99-207-4385

5340-99-215-8419
Warning Light Mount

5340-99-160-4629
Webbing Strap

991604629
DA26179: RNCC: 3 | RNVC: 2

3 Jul 2007

5340-99-126-4156
Loop Clamp

991264156
150.00.144: RNCC: 3 | RNVC: 2
BOF21648: RNCC: 5 | RNVC: 2
STC3442: RNCC: 5 | RNVC: 2
150.00.144: RNCC: 5 | RNVC: 2
FJ961X70040: RNCC: 6 | RNVC: 9

17 Jan 1997

5340-99-891-7523
Striker Plate

998917523
K503680: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-895-5283
Retaining Band

998955283
232682: RNCC: 3 | RNVC: 9
61LE40794: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-900-8335
Dust And Moisture Seal Protective Cap

999008335
RU6471A: RNCC: 3 | RNVC: 2
RU6471A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-895-5248
Retaining Band

998955248
230817: RNCC: 3 | RNVC: 9
61LE40732: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-895-5176
Rod End Clevis

998955176
FV 192728: RNCC: 3 | RNVC: 2
LV6MT13FV192728: RNCC: 6 | RNVC: 9
61LE40492: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-895-1963
Butt Hinge Leaf

998951963
304104: RNCC: 3 | RNVC: 2
61RV40675: RNCC: 6 | RNVC: 9

30 Aug 1980

5340-99-679-9225
Mounting Plate

996799225
50033499: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-99-830-2997
Support Assembly

5340-99-832-1162

5340-99-159-7357
Angle Bracket

991597357
16747-150: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-99-587-3777
Webbing Strap

995873777
ME40-0555715: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-99-146-6424
Angle Bracket

991466424
SS1061-208: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-204-5572
Helical Compre Seat

992045572
NO PRIMARY REF 99-204-5572: RNCC: 3 | RNVC: 2
9769: RNCC: 5 | RNVC: 1
1TA44783: RNCC: 5 | RNVC: 9
W8WA10834: RNCC: 6 | RNVC: 9

1 Apr 1977

5340-99-414-6502
Block Clamp

994146502
EA122-002: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-99-602-0856
Loop Clamp

996020856
WG1368-0161-103: RNCC: 3 | RNVC: 2
WG1368-0161 ITEM40: RNCC: 5 | RNVC: 2
85-690-3709: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-142-3073
Spring Tension Clip

991423073
LS100-17: RNCC: 3 | RNVC: 1
PC265528-15: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-623-5174
Insert

996235174
SL602M5-12-3C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-396-5964
Mounting Bracket

993965964
451-450-120: RNCC: 3 | RNVC: 2

8 May 2013

5340-99-148-1090
Double Angle Bracket

991481090
70-55-742: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-99-751-2419
Retaining Strap

997512419
37-07068-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-359-9203
Mounting Plate

993599203
26-2138: RNCC: 3 | RNVC: 2
CV200444: RNCC: 5 | RNVC: 2

6 Aug 2013

5340-99-522-4275
Protection Bellows

995224275
S10-91-201XA: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-416-7706
Block Fairlead

994167706
EA9-73-164: RNCC: 3 | RNVC: 2
26FZ22803: RNCC: 6 | RNVC: 9
26FZ22803: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-612-3345
Seal Retaining Plate

996123345
J53102044-001: RNCC: 3 | RNVC: 2

11 May 2001

5340-99-732-5087
Counterspacer

997325087
NO PRIMARY REF 99-732-5087: RNCC: 3 | RNVC: 2
229780P3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-734-3494
Extension Drawer Slide

997343494
MM4009A03/00103: RNCC: 3 | RNVC: 2
MM4009A: RNCC: 5 | RNVC: 2
989009052: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-734-3614
Angle Bracket

997343614
MM4414A01/00101: RNCC: 3 | RNVC: 2
MM4414A: RNCC: 5 | RNVC: 2
989009172: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-848-0429
Block Clamp

998480429
115087-549: RNCC: 3 | RNVC: 2
26VC-21217: RNCC: 6 | RNVC: 9

12 Feb 2002

5340-99-881-5856
Access Cover

998815856
Y7095-362: RNCC: 3 | RNVC: 2
LV6MT12-2910998815856: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-778-2545
Access Cover

997782545
70-98-184: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-99-880-0423
Mounting Bracket

998800423
391-450-034: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-99-833-8851
Rod End Clevis

998338851
110033-4257: RNCC: 3 | RNVC: 2
26VC-3044: RNCC: 6 | RNVC: 9

28 Jul 2004

5340-99-930-3327
Catch Strike

999303327
26842-204: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-99-787-4693
Engine Accessory Bracket

997874693
FV2229840: RNCC: 3 | RNVC: 2
0332L-004: RNCC: 6 | RNVC: 9

13 Aug 2003

5340-99-849-5310
Block Clamp

998495310
110087-2787: RNCC: 3 | RNVC: 2
26VC21697: RNCC: 6 | RNVC: 9

15 Jan 2002

5340-99-872-1801
Dust And Moisture Seal Protective Plug

998721801
243-55011-03: RNCC: 3 | RNVC: 2
SF 29149: RNCC: 5 | RNVC: 2
022GK-005: RNCC: 6 | RNVC: 9

16 Aug 2002

5340-99-540-8877
Rod End Clevis

995408877
33853-151: RNCC: 3 | RNVC: 2
33853-151-2: RNCC: 5 | RNVC: 2
H474-196894: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-513-3742
Dust And Moisture Seal Protective Cap

995133742
ABB-20-X-PCA: RNCC: 3 | RNVC: 2
SC220740-456: RNCC: 5 | RNVC: 2
ND3644: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-915-1912
Spacing Threaded Standoff

999151912
110079-14257: RNCC: 3 | RNVC: 2
110079 14257: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-923-5854
General Purpose Resilient Mount

999235854
EN22-1022: RNCC: 3 | RNVC: 2
B.R.3011-2142: RNCC: 5 | RNVC: 2
DSP063-144-100: RNCC: 5 | RNVC: 2
0413-2142: RNCC: 6 | RNVC: 9
0413-923-5854: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-192-8061
Retaining Strap

991928061
GQD14328: RNCC: 3 | RNVC: 2
D14328-001-4: RNCC: 5 | RNVC: 2

26 Mar 1993

5340-99-100-1797

5340-99-087-8897
Sust Sect

5340-99-225-6021
Angle Bracket

992256021
C247581: RNCC: 3 | RNVC: 2
FF962580013: RNCC: 6 | RNVC: 9

26 Feb 1996

5340-99-362-1648
Access Cover

993621648
L06020600: RNCC: 3 | RNVC: 2

15 Aug 2003

5340-99-214-3960
Rigid Caster

992143960
TR4100PTR4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-322-5721
Access Cover

993225721
FV2271793: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-99-000-5456
Dust And Moisture Seal Protective Cap-Plug

990005456
4999991070: RNCC: 3 | RNVC: 2
5097158: RNCC: 5 | RNVC: 2

9 Jul 2009

5340-99-338-7786
Handle And Bush Ass

993387786
SF546 AND SF552: RNCC: 3 | RNVC: 2
SF552 AND SF546: RNCC: 5 | RNVC: 2

13 Jan 1992

5340-99-222-5911
Butt Hinge Leaf

992225911
002773: RNCC: 3 | RNVC: 2
VA002773: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-433-0575
Retaining Ring

994330575
5CX5902: RNCC: 3 | RNVC: 2
D7339: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-485-3892
Mounting Bracket

994853892
108077: RNCC: 3 | RNVC: 2

10 May 2013

5340-99-582-5989
Caster Wheel

995825989
21132: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-99-584-1842
Block Clamp

995841842
110087SHT365: RNCC: 3 | RNVC: 2
26VC22185: RNCC: 6 | RNVC: 9

16 Jan 2002

5340-99-459-4695
Plain Solid Disc

994594695
MC6954: RNCC: 3 | RNVC: 2
301311: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-136-5735
Webbing Strap

991365735
DDC27311TEM1: RNCC: 3 | RNVC: 1
MEMC8374: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-464-1182
Angle Bracket

994641182
191 640 12: RNCC: 3 | RNVC: 2

25 Jun 1990

5340-99-479-5253
Loop Clamp

994795253
MDS2605A08: RNCC: 1 | RNVC: 2
11944PH08Y: RNCC: 3 | RNVC: 2
TA028M014NB08: RNCC: 3 | RNVC: 2
11944PH08Y: RNCC: 5 | RNVC: 2
TA028M014NB08: RNCC: 5 | RNVC: 2

23 Dec 1998

5340-99-120-8179
Rod End Connector

991208179
FV1061819: RNCC: 3 | RNVC: 2
FV1061819: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-99-108-8851
Mounting Bracket

991088851
PU14399: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-614-6007
Dust And Moisture Seal Protective Plug

996146007
BMS601: RNCC: 3 | RNVC: 2
P305421: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-551-8675
Type Charge Leg Set

995518675
MM2018: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-99-573-5638
Electronic Equipment Hardware Kit

995735638
SA108853: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-99-631-0818
Butt Hinge

996310818
815566: RNCC: 3 | RNVC: 2
V815566: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-460-7888
Rod End Connector

994607888
AC030489: RNCC: 3 | RNVC: 2
27WW958: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-523-2403
Tee Handle Lock

995232403
T44: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-501-1269
Loop Clamp

995011269
18SS3264: RNCC: 3 | RNVC: 2
SS3264: RNCC: 5 | RNVC: 1
26FP13266: RNCC: 6 | RNVC: 9

20 May 1991

5340-99-337-1491
Mounting Bracket

993371491
CS0958: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-99-500-7687
Heater Shield Assem

995007687
S3S18186001: RNCC: 3 | RNVC: 2

9 Oct 1997

5340-99-419-9988
Dust And Moisture Seal Protective Cap

994199988
00X: RNCC: 3 | RNVC: 1
1109006: RNCC: 5 | RNVC: 2
36VV17926: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-668-1721
General Purpose Guard Rail Section

996681721
AK20431H023: RNCC: 3 | RNVC: 2
CV174315: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-99-815-6637
General Purpose Resilient Mount

998156637
F.V.51106: RNCC: 3 | RNVC: 2
LV9ASCFV51106: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-813-3988
Mounting Plate

998133988
577436: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-771-6455
Helical Compression Spring Retainer

997716455
ND30319: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-768-3589
Access Cover

997683589
1476R024: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-99-778-8118
General Purpose Resilient Mount

997788118
AV.174 X 155 X 16 MM THK: RNCC: 3 | RNVC: 2
AV: RNCC: 5 | RNVC: 1
SQUAREGRIP: RNCC: 5 | RNVC: 1
AV.174 X 155 X 16: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-348-2160
General Purpose Resilient Mount

993482160
90711/1: RNCC: 3 | RNVC: 2

9 Apr 2001

5340-99-732-3965
Rod End Clevis

997323965
JPD2050: RNCC: 3 | RNVC: 2
65043S1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-7725
Rod End Clevis

998157725
FV728463: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-2172
Dust And Moisture Seal Protective Plug

998272172
FG23373: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-9852
Nonmetallic Bushing

998239852
FV659766: RNCC: 3 | RNVC: 2
AR170: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-827-6744
General Purpose Resilient Mount

998276744
FV 738699: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-4508
Retainer Plate

998274508
FV701680: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-5817
Retaining Band

998245817
8824245: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-3306
Plain Solid Disk

998283306
FV 738567: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-7330
Loop Clamp

998277330
41017650: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-9009
Retaining Strap

998239009
FV 660084: RNCC: 3 | RNVC: 2
AR533: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-8833
Retaining Strap

998298833
FV814461: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-2415
Loop Clamp

998232415
FV473948: RNCC: 3 | RNVC: 2

28 Jul 1978

5340-99-823-5453
Mounting Plate

998235453
46422S: RNCC: 3 | RNVC: 2
FV 773010: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-8883
Locking Clip

998308883
6491006: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-3159
Manual Control Lever

998283159
FV 836994: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-831-6762
Location Lug

998316762
206813: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-99-823-2418
Loop Clamp

998232418
FV473949: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-807-1074
Rod End Clevis

998071074
FV 2159001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-3833
Loop Clamp

998263833
FV894894: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-822-2687
Dust And Moisture Seal Protective Cap-Plug

998222687
FV612063: RNCC: 3 | RNVC: 2
SBMSE104: RNCC: 5 | RNVC: 2
SBMSE104SIZE8: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-902-1406
Cushioning Pad

999021406
FV 2095855: RNCC: 3 | RNVC: 2
FV 2095855: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-823-7856
Retaining Band

998237856
650E9057: RNCC: 3 | RNVC: 2
463727: RNCC: 5 | RNVC: 2
1748636: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-822-7808
Retaining Strap

998227808
596142: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-6604
Loop Clamp

998296604
FV566695: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-99-408-1208
Access Cover

994081208
260140: RNCC: 3 | RNVC: 2
16E19731: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-440-7254
Set Caster

994407254
APARCC: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-99-444-7257
Lock Bolt

994447257
271451020520: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-99-423-1253
Dust And Moisture Seal Protective Cap

994231253
SL312: RNCC: 3 | RNVC: 2
4Q3231: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-149-8183
Access Cover

991498183
MBEU97406: RNCC: 3 | RNVC: 2
6D5412: RNCC: 6 | RNVC: 9

14 Feb 1994

5340-99-826-8618
Loop Clamp

998268618
FV.948450: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-99-824-5149
Handle Grip

998245149
RNL103: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-8587
Cremone Bolt

998248587
70VBV431K34AA: RNCC: 3 | RNVC: 2
1514601: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-823-6370
Flush Catch Claw

998236370
FV775522: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-825-8634
Cable Clamp

998258634
CH615404: RNCC: 3 | RNVC: 2
06033705: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-830-3418
Fusible Plug

998303418
AHO90577: RNCC: 3 | RNVC: 2

9 Jan 1999

5340-99-517-3245
Angle Bracket

995173245
FV 2034909: RNCC: 3 | RNVC: 2
FV 2034909: RNCC: 5 | RNVC: 2

4 Oct 1996

5340-99-753-5306
Loop Clamp

997535306
FV.573719: RNCC: 3 | RNVC: 2
101131T: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-745-7529
Rod End Clevis

997457529
AL20364: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-745-5766
Section Block Clamp

997455766
NEB417: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-228-4221
Bracket Assy

992284221
M5725811600100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-435-7317
Loop Clamp

994357317
NK8604: RNCC: 3 | RNVC: 2
5UA8425: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-964-4390
Dust And Moisture Seal Protective Plug

999644390
FV661286: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-723-5343
Plate

997235343
FV 2040619: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-99-725-6596
Blank Panel

997256596
98263: RNCC: 3 | RNVC: 2

23 Sep 2009

5340-99-756-0825
Rim Clenching Clamp

997560825
362323: RNCC: 3 | RNVC: 2
362323A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-753-6874
Angle Bracket

997536874
3P200188: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-816-9825
Gimbal Bracket

998169825
MZK4097: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-99-753-3881
Mounting Bracket

997533881
B21686: RNCC: 3 | RNVC: 2
1406213: RNCC: 5 | RNVC: 2
106140051023: RNCC: 5 | RNVC: 2
1406213: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-817-0447
Dust And Moisture Seal Boot

998170447
E17806: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-752-3614
Loop Clamp

997523614
FV 2096619: RNCC: 3 | RNVC: 2

14 Mar 1992

5340-99-815-7506
Filler Opening Cap

998157506
4FE1163: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-811-5151
Mounting Bracket

998115151
37092T: RNCC: 3 | RNVC: 2
LV1VSM37092T: RNCC: 6 | RNVC: 9

25 Jul 1979

5340-99-815-7045
Rod End Clevis

998157045
FV50452: RNCC: 3 | RNVC: 2
LV9ASCFV50452: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-143-3136
Angle Bracket

991433136
NN15490P01: RNCC: 3 | RNVC: 2
NN15490P01: RNCC: 5 | RNVC: 2
NN15490: RNCC: 5 | RNVC: 2

19 Jun 1999

5340-99-559-4132
Retaining Strap

5340-99-633-7811

5340-99-432-4074
Exte Helical Spring

5340-99-964-0116
Manual Control Lever

999640116
TR902: RNCC: 3 | RNVC: 2
N1TR902: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-958-3371
Loop Clamp

999583371
22481568: RNCC: 3 | RNVC: 2
CV164969: RNCC: 5 | RNVC: 2

28 Apr 2009

5340-99-964-2884
Access Cover

999642884
OS 85291: RNCC: 3 | RNVC: 2
A1233-A410: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-5640
Mounting Bracket

999585640
CK0515185: RNCC: 3 | RNVC: 2
CK0515185: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-99-958-1918
Multiple Angle Bracket

999581918
48313: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-99-867-1209
Dust And Moisture Seal Protective Cap

998671209
FV460873: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-870-0149
Webbing Strap

998700149
FV 2149971: RNCC: 3 | RNVC: 2
FV 2149971: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-858-1010
Rubber Bumper

998581010
91052753: RNCC: 3 | RNVC: 2
91052753: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-865-3805
Nut And Bolt Locking Plate

998653805
FV450870: RNCC: 3 | RNVC: 2
CC800: RNCC: 5 | RNVC: 2

26 Mar 1985

5340-99-871-6409
General Purpose Resilient Mount

998716409
KP00655: RNCC: 3 | RNVC: 2

1 Sep 2008

5340-99-958-2173
Rod End Clevis

999582173
2632097: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-99-960-6703
Comp Helical Spring

999606703
CM6844: RNCC: 3 | RNVC: 2
CM6844: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-206-0248
Rod End Clevis

992060248
BFF1442: RNCC: 3 | RNVC: 2
BFF1442: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-257-9011
Multiple Angle Bracket

992579011
CU.49122: RNCC: 3 | RNVC: 2
CU.49122: RNCC: 5 | RNVC: 9
36AE5262: RNCC: 6 | RNVC: 9

18 Apr 1995

5340-99-414-8971
Nut And Bolt Locking Plate

994148971
BA20610: RNCC: 3 | RNVC: 2
36VV1405: RNCC: 6 | RNVC: 9
36VV1405: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-173-8299
Mounting Bracket

991738299
40006764: RNCC: 3 | RNVC: 2

6 Jan 2012

5340-99-866-2812
Vehicular Ha Handle

998662812
FV 477645: RNCC: 3 | RNVC: 2
FV 477645: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-858-2599
Loop Clamp

998582599
EF811A38: RNCC: 1 | RNVC: 2
11944PH38Y: RNCC: 3 | RNVC: 2
TA028M014NB38: RNCC: 3 | RNVC: 2
11944PH38Y: RNCC: 5 | RNVC: 2
TA028M014NB38: RNCC: 5 | RNVC: 2

22 Jul 2013

5340-99-958-8774
Mounting Bracket

999588774
40010471: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-99-958-3768
Metal Grille

999583768
98294: RNCC: 3 | RNVC: 2

23 Sep 2009

5340-99-958-1949
Angle Bracket

999581949
EU12915: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-99-960-8741
Snap Hook

999608741
FIG10001D2IN: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-330-2332
Mounting Bracket

993302332
WG1380-0647-065: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-99-132-6600
Mounting Bracket

991326600
A2-6753: RNCC: 3 | RNVC: 2
BFDSPESS/CSSL/228: RNCC: 6 | RNVC: 9
BFDSPESS/CSSL/229: RNCC: 6 | RNVC: 9
BFDSPESS/CSSL/232: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-535-5710
Spring Holder

995355710
508119: RNCC: 3 | RNVC: 2
508119-1: RNCC: 5 | RNVC: 2
A3 508119: RNCC: 5 | RNVC: 2
A3 508119-1: RNCC: 5 | RNVC: 2
BW508119-1: RNCC: 5 | RNVC: 2

22 Dec 1994

5340-99-979-1563
Peg

999791563
69302507: RNCC: 3 | RNVC: 2
69302557 REFERENCE 28: RNCC: 5 | RNVC: 2
69302557/28: RNCC: 5 | RNVC: 2

21 Aug 2003

5340-99-979-7970
Mechanic Equipment Hardware Kit

999797970
SC-02 SCREW SET: RNCC: 3 | RNVC: 2
SPSCM/PO/1301: RNCC: 6 | RNVC: 9

14 Jan 2010

5340-99-984-8055
Block Slide

999848055
SSK/Y/581/85/0402/161: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-99-659-0508
Access Cover

996590508
P-212016-417: RNCC: 3 | RNVC: 2
P212016-417: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-805-0849
Loop Clamp

998050849
FV246327-9: RNCC: 3 | RNVC: 2
LV6MT4-78321: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-660-5270
Access Cover

996605270
49301-405-23: RNCC: 3 | RNVC: 2
49301-405-23: RNCC: 5 | RNVC: 2

25 Jan 1993

5340-99-146-9252
Mounting Bracket

991469252
WD01-73-90210-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-213-3142
Lever

992133142
70-55-9097: RNCC: 3 | RNVC: 2

12 Jun 2009

5340-99-127-3221
Adapter

991273221
NO PRIMARY REF 99-127-3221: RNCC: 3 | RNVC: 2
5645624: RNCC: 5 | RNVC: 2
C574-LWM041045: RNCC: 6 | RNVC: 9

21 Jun 2001

5340-99-338-8093
Loop Assembly Clamp

993388093
J21200177-402: RNCC: 3 | RNVC: 2

13 Jan 2001

5340-99-604-1269
Loop Clamp

996041269
STD2046-32-22: RNCC: 3 | RNVC: 2
STD2046-32-22: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-414-6463
Protection Cap

994146463
457-250 722.001: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-99-279-8635
Rod End Clevis

992798635
110033-655: RNCC: 3 | RNVC: 2
26VC-5562: RNCC: 6 | RNVC: 9

4 Aug 2004

5340-99-611-1244
Block Fairlead

996111244
1370600E4: RNCC: 3 | RNVC: 2
2-1370600E4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-939-0958
Manual Control Lever

999390958
EA5610A099-101: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-542-4711
Dust And Moisture Seal Protective Cap

995424711
VG68605-1PTE: RNCC: 3 | RNVC: 2
127477: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-212-8236
Mounting Strip

992128236
1075-0032A: RNCC: 3 | RNVC: 2

13 Jul 2005

5340-99-300-5318
Runner

993005318
100402-3005-002: RNCC: 3 | RNVC: 2
100402-3005-002: RNCC: 5 | RNVC: 2

25 Jan 2012

5340-99-438-2862
Engine Accessory Bracket

994382862
NB-74-1895: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-99-747-4650
Mounting Bracket

997474650
ER5332B063-080: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-99-327-9551
Retaining Strap

993279551
WD5010-00308-105: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-99-812-8308
Angle Bracket

998128308
WG1512-0085-101: RNCC: 3 | RNVC: 2
105LP-002: RNCC: 6 | RNVC: 9

28 Apr 2009

5340-99-780-2546
Detent Plunger

997802546
904803-1019-014: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-146-2504
Mounting Bracket

991462504
WD01-10-91210: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-517-8977
Angle Bracket

995178977
FV2272941: RNCC: 3 | RNVC: 2
07228-012: RNCC: 6 | RNVC: 9

23 Apr 2007

5340-99-455-2173
Mounting Bracket

994552173
EU5310B503-101: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-99-803-4429
Threaded End Tensioning Tie Rod

998034429
M:T1:57:4815/3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-570-5812
Nut A Locking Plate

5340-99-533-8970
S Threaded Standoff

5340-99-168-7870
Gaiter

991687870
KY2070/1: RNCC: 3 | RNVC: 2
612069/2: RNCC: 5 | RNVC: 2

20 Nov 1992

5340-99-110-8422
Screwed Plug

991108422
CH127347-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-8589
Spring Tension Clip

992128589
S1006270: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5340-99-643-9748
Angle Bracket

996439748
703-18-3-11706: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-99-156-0030
Grooved Clamp Coupling

991560030
TU40211009AC3A: RNCC: 3 | RNVC: 2
211MM-S-M8-40: RNCC: 5 | RNVC: 2
CA0101/9-211MM-S-M8-40: RNCC: 5 | RNVC: 2

16 Jul 2004

5340-99-573-7494
Webbing Strap

995737494
01802-2-01414-0L2.1M-FL0.27M-TSB: RNCC: 3 | RNVC: 2
AC/13/5/1011: RNCC: 5 | RNVC: 2
MMD11034: RNCC: 5 | RNVC: 2
FP980: RNCC: 6 | RNVC: 9

17 Nov 1997

5340-99-846-0572
Double Angle Bracket

998460572
211/000479/0: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-99-244-8060
Access Cover

992448060
1-4169-1/29: RNCC: 3 | RNVC: 2
FF962VJ0001: RNCC: 6 | RNVC: 9

3 Oct 1996

5340-99-257-1851
Handwheel

992571851
VRTP.100+IR-A 10: RNCC: 3 | RNVC: 2
A3/88/69: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-616-7898
Nozzle Ring Assembl

996167898
SR1317/7: RNCC: 3 | RNVC: 2
280-97/53: RNCC: 6 | RNVC: 9
ND01/3/1: RNCC: 6 | RNVC: 9

16 Dec 1997

5340-99-252-3153
General Purpose Resilient Mount

992523153
PT0147-3-800010: RNCC: 3 | RNVC: 2
620/7/15243/000: RNCC: 5 | RNVC: 2
ED27-002-11-45: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-977-7290
Dust And Moisture Seal Protective Cap

999777290
AS41914-22G: RNCC: 3 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
AS41914-22G: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-264-0901
Mounting Plate

992640901
PTYB13555A-CGNG: RNCC: 3 | RNVC: 2
GNGB13700A-C ITEM 10: RNCC: 5 | RNVC: 2
GNGB13700A-C/10: RNCC: 5 | RNVC: 2

8 Dec 2010

5340-99-224-4499
Stud

992244499
243320 ITEM H: RNCC: 3 | RNVC: 2
243320/H: RNCC: 5 | RNVC: 2
71A581: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-130-4398

5340-99-269-1293
Swivel Caster

992691293
TSE 200 NY15L: RNCC: 3 | RNVC: 2
TSE 200 NY15L: RNCC: 5 | RNVC: 2
011XM0032: RNCC: 6 | RNVC: 9

30 Jul 2001

5340-99-756-6597
Spring Tension Clip

5340-99-749-5986

5340-99-119-3653
Loop Clamp

5340-99-766-8612
Electrical-Mec Post

5340-99-124-2498

5340-99-123-9856

5340-99-469-7922

5340-99-466-3971
Quick Release Pin

5340-99-974-1910
Metal Grille

999741910
FV2254023: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-99-984-8325
Mounting Plate

999848325
POG119771: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-99-419-5272
Pad Eye

994195272
CHC356: RNCC: 3 | RNVC: 2
0262-16907: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-983-1216
Manual Control Lever

999831216
FV2273424: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-99-973-3531
Sub-Assembl Bracket

999733531
6930506: RNCC: 3 | RNVC: 2
FF9530C0126: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-973-3593
Clamp

999733593
FV 2115981: RNCC: 3 | RNVC: 2

30 Mar 1996

5340-99-994-6168
Bracket

999946168
M5755474820000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-434-2541
Angle Bracket

994342541
CX121868: RNCC: 3 | RNVC: 2
5UB6387: RNCC: 6 | RNVC: 9

23 Sep 1980

5340-99-144-5073
Webbing Strap

991445073
MBEU33362: RNCC: 3 | RNVC: 2
MBEU33362: RNCC: 5 | RNVC: 2
CMBEU33362: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-225-1327
Loop Clamp

992251327
400A3-7311: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-297-7199
Retainer Bracket

992977199
K511966: RNCC: 3 | RNVC: 2

3 Oct 2004

5340-99-252-9123
Dust And Moisture Seal Protective Cap

992529123
7313 527 1280: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-99-133-8146
Mounting Bracket

991338146
UG0543158: RNCC: 3 | RNVC: 2
UG0543158: RNCC: 5 | RNVC: 9
992294821: RNCC: 6 | RNVC: 9

11 Dec 2006

5340-99-204-1344
Clamping Catch

992041344
A20191: RNCC: 3 | RNVC: 2
WEB47825: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-702-2265
Hinge Arm

997022265
AS59834: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-99-469-8225
Loop Clamp

994698225
5020328: RNCC: 3 | RNVC: 2
27FR32020: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-212-4191
Access Cover

992124191
MBEU163153: RNCC: 3 | RNVC: 2
MBEU163153: RNCC: 5 | RNVC: 2

11 May 2002

5340-99-420-8514
Dust And Moisture Seal Protective Cap

994208514
BA52337: RNCC: 3 | RNVC: 2
36VV9529: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-423-3583
Lock Key

994233583
FK4DATASH102: RNCC: 3 | RNVC: 2
ASWE17166R1ADDAD: RNCC: 6 | RNVC: 9
0265-218490: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-297-7933
Snap Hook

992977933
AM SK.010: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-99-264-5577
P Type-Cushio Clamp

992645577
DDS8240B10: RNCC: 3 | RNVC: 2

14 Jan 2006

5340-99-710-3024
Loop Clamp

997103024
SJ405065: RNCC: 3 | RNVC: 2
36AD3478: RNCC: 6 | RNVC: 9
SJ405065: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-551-3594
Vehicular Seat Bracket

995513594
FV2260094: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-99-206-7769
Butt Hinge

5340-99-214-4587
Butt Hinge

992144587
80784-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-7543
General Purpose Resilient Mount

991537543
50148: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-99-104-5924
Detent Plunger

5340-99-830-0918
Silencer Strap

5340-99-785-3457
Loop Clamp

5340-99-881-3555

5340-99-862-1170

5340-99-881-7281
Lock

5340-99-885-0686
Dust Protective Cap

5340-99-861-3959

5340-99-873-8802

5340-99-850-1709
Access Cover

5340-99-866-3726
Resilient Mount

5340-99-104-6911

5340-99-202-9839

Load More Results