What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 96 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 96 of 368

5340-99-970-2474

5340-99-824-6966

5340-99-895-8244

5340-99-850-7340
Mounting Plate

998507340
1026069-AC-01-042: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-99-598-6598
Inner Sleeve

995986598
3A327-0301: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-99-332-8458
Line Supporting Strap

993328458
5182-11-020: RNCC: 3 | RNVC: 2
T50L: RNCC: 6 | RNVC: 9
170-3924: RNCC: 6 | RNVC: 9

13 Aug 2010

5340-99-544-8564
Access Cover

995448564
K167-20-1498: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-436-2138
Sleeve

994362138
N27300412-001: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-99-711-4454
Access Cover

997114454
25FC3707/11: RNCC: 3 | RNVC: 2
26TD-3669: RNCC: 6 | RNVC: 9
26TD3669: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-958-0422
Mounting Plate

999580422
A2N21008549: RNCC: 3 | RNVC: 2
A2N21008549: RNCC: 5 | RNVC: 2
A2N21008549: RNCC: 5 | RNVC: 2
044AJ-005: RNCC: 6 | RNVC: 9
044GM0006: RNCC: 6 | RNVC: 9

14 Dec 2004

5340-99-117-1438
Access Cover Plate

991171438
NO PRIMARY REF 99-117-1438: RNCC: 3 | RNVC: 2
00E103456: RNCC: 5 | RNVC: 2
E103456: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-442-0042
Compression Cup

994420042
118D1788: RNCC: 3 | RNVC: 2
A1R41920: RNCC: 5 | RNVC: 2
4G3095: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-152-0825
Bracket Assy

991520825
M5755182800100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-188-5677
Mounting Plate

991885677
10-70-820: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-99-739-0696
Mounting Plate

997390696
35173: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-6432
Side Lock Assembly

995626432
16242: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-99-650-6971
Nonmetallic Bushing

996506971
5109006219: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-821-2018
Mounting Bracket

998212018
ESR3101: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-99-816-9559
Retaining Strap

998169559
FV 626304: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-99-752-4201
Mounting Bracket

997524201
S14 94 2625XAA: RNCC: 3 | RNVC: 2

6 May 2004

5340-99-738-6889
Escutcheon Plate

997386889
7211662241: RNCC: 3 | RNVC: 2

2 Feb 2010

5340-99-733-4290
Electrical-Mec Post

997334290
IR0190088: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-987-5550
Mounting Bracket

999875550
110029-19241: RNCC: 3 | RNVC: 2
26VC-4438: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-960-7393
Spring Retainer

999607393
6810000: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-99-872-2027
Rod End Clevis

998722027
JATE21229: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-99-870-1497
Multiple Angle Bracket

998701497
3854-86420: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-99-149-1759
Helical Compression Spring Seat

991491759
104560604: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-665-8079
Rod End Clevis

996658079
M11345: RNCC: 3 | RNVC: 2

4 Nov 2002

5340-99-431-5114
Retaining Strap

994315114
VS07526: RNCC: 3 | RNVC: 2
X3XCRHVS07526: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-254-9711
Tie Bar

992549711
FV 895269: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-684-4761
Bracket

996844761
M5745847420000: RNCC: 3 | RNVC: 2

16 Feb 2013

5340-99-759-6967
Fork End

5340-99-624-3603
Escutcheon Plate

5340-99-568-5637
Extens Drawer Slide

5340-99-608-3512
Loop Clamp

5340-99-701-7870

5340-99-624-2128

5340-99-663-2031

5340-99-702-1150
Mounting Bracket

5340-99-600-3679

5340-99-795-4274
Mounting Bracket

5340-99-702-5192
Gland

5340-99-651-9142

5340-99-562-5310
Angle

5340-99-660-4714

5340-99-810-8727
Coupling

998108727
SR0548/3: RNCC: 3 | RNVC: 2
298221: RNCC: 6 | RNVC: 9
1561-93/1: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-99-755-0182
Helical Compression Spring Seat

997550182
SSN07/W/502/60/3/10: RNCC: 3 | RNVC: 1
W/502/60/3/10: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-853-8217
Clamps

998538217
FEP-1409-SC/024: RNCC: 3 | RNVC: 2
PA105/8: RNCC: 5 | RNVC: 2
022TJ-029: RNCC: 6 | RNVC: 9

16 Sep 2002

5340-99-551-6752
Webbing Strap

995516752
70-99-969/0.5: RNCC: 3 | RNVC: 2
70-99-969: RNCC: 5 | RNVC: 1

3 Mar 2009

5340-99-808-9733
Hinge Pin

998089733
M00220020: RNCC: 3 | RNVC: 2
M22: RNCC: 5 | RNVC: 1
482-1403: RNCC: 6 | RNVC: 9
LV6MT13-88302: RNCC: 6 | RNVC: 9
A/C61867: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-888-2957
Nut And Bolt Locking Plate

998882957
119X0559 ITEM 64: RNCC: 3 | RNVC: 2
P/320/20/8001/000/068/02 ITEM 64: RNCC: 5 | RNVC: 1
P/320/20/8001/000/068/02/64: RNCC: 5 | RNVC: 1
130/284001/22: RNCC: 5 | RNVC: 1
007527229 SHEET 068 ITEM 64: RNCC: 5 | RNVC: 2
007527229 SHEET 068/64: RNCC: 5 | RNVC: 2
SST/P/320/20/8001/000/068/02/64: RNCC: 5 | RNVC: 2
119X0559/64: RNCC: 5 | RNVC: 2
IF2091A3: RNCC: 6 | RNVC: 9

8 Oct 1998

5340-99-500-9019
Multiple Angle Bracket

995009019
110084-4567: RNCC: 3 | RNVC: 2
110084-4567/4568: RNCC: 5 | RNVC: 1
XP98PE01351: RNCC: 6 | RNVC: 9

13 May 1998

5340-99-152-7662
Mounting Bracket

991527662
NO PRIMARY REF 99-152-7662: RNCC: 3 | RNVC: 2
CV191959: RNCC: 5 | RNVC: 2
NU-BRCF-01: RNCC: 5 | RNVC: 2

25 Nov 2011

5340-99-676-4745
Mounting Bracket

996764745
ER2520F004-041: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-99-915-1564
Contact Spring

999151564
MS407: RNCC: 3 | RNVC: 2
80-08-81-0686: RNCC: 5 | RNVC: 2
K021-021103: RNCC: 6 | RNVC: 9
K021-21103: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-608-5793
Loop Clamp

996085793
E13: RNCC: 3 | RNVC: 2
DSTD387-13: RNCC: 5 | RNVC: 2
STD387-13: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-256-6592
Loop Clamp

992566592
CV6888: RNCC: 3 | RNVC: 2
94101-0515: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-553-7743
Pedestal

995537743
NO PRIMARY REF 99-553-7743: RNCC: 3 | RNVC: 2
AS-2191: RNCC: 5 | RNVC: 2
26FZ25511: RNCC: 6 | RNVC: 9

31 Jul 2002

5340-99-656-1367
Dust And Moisture Seal Protective Cap

996561367
C110GREY: RNCC: 3 | RNVC: 2
A46-7139-52: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-153-0531
Blank Panel

991530531
NC9900-193-101: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-99-451-9013
Flush Lock

994519013
NO PRIMARY REF 99-451-9013: RNCC: 3 | RNVC: 2
RA295C: RNCC: 5 | RNVC: 9
Z4ZD04889: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-254-8849
Loop Clamp

992548849
52/9/11962: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-99-513-8426
Support Bracket

995138426
A2/1514R1435.3: RNCC: 3 | RNVC: 2
1514R1435.3: RNCC: 5 | RNVC: 2

20 Apr 1995

5340-99-776-0498
Helical Compression Spring Seat

997760498
A5985-1: RNCC: 3 | RNVC: 9
A5985: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-834-4898
Mounting Block

998344898
561/2/28585/000: RNCC: 3 | RNVC: 2

19 Jul 2006

5340-99-571-5326
Rim Lock Set

995715326
VV07002B: RNCC: 3 | RNVC: 2
NPPO(DAS)/509508/1: RNCC: 6 | RNVC: 9

22 May 2007

5340-99-401-1784
Metal Grille

994011784
3HF/200/150/25T/SF: RNCC: 3 | RNVC: 1
3HF: RNCC: 5 | RNVC: 1
C117240-2: RNCC: 5 | RNVC: 1

24 Jan 1995

5340-99-501-4749
Mounting Bracket

995014749
AB/2/3/10030: RNCC: 3 | RNVC: 2
MM 10976: RNCC: 5 | RNVC: 2
040KG-001: RNCC: 6 | RNVC: 9

19 Feb 2004

5340-99-606-7743
Loop Clamp

996067743
FBS813: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-5156
Mounting Bracket

992125156
16946: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-99-427-2435

5340-99-454-0965

5340-99-425-0629

5340-99-215-2900
Electrical-Mec Post

5340-99-096-4522
Mounting Plate

5340-99-427-3701

5340-99-436-2285

5340-99-967-7289
Mounting Bracket

999677289
FV 2187462: RNCC: 3 | RNVC: 2
FV 2187462: RNCC: 5 | RNVC: 2

14 Jul 1999

5340-99-949-9373
Comp Helical Spring

999499373
D9477: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-949-9132
Support Hook

999499132
433957: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-955-5616
Spring Tension Clip

999555616
RRA825598: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-976-0128
Angle Bracket

999760128
849058: RNCC: 3 | RNVC: 2
FJ9702G0001: RNCC: 6 | RNVC: 9

11 Feb 1997

5340-99-957-6827
Screw Thread Insert

999576827
50862964: RNCC: 3 | RNVC: 2
9800G0106: RNCC: 6 | RNVC: 9

10 Mar 1998

5340-99-957-8678
Bracket

999578678
25DC25A: RNCC: 3 | RNVC: 2
26TD-6954: RNCC: 6 | RNVC: 9

21 Jun 2002

5340-99-968-4211
Retaining Strap

999684211
6M4FF6265ND: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-99-975-1992
Dust And Moisture Seal Protective Cap

999751992
0503-155: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-99-987-5609
Engine Accessory Bracket

999875609
NJ192544: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-99-988-8373
Mounting Plate

999888373
FEN NG 782: RNCC: 3 | RNVC: 2

7 Nov 2008

5340-99-967-4006
Protective Cap-Plug

999674006
1926-218: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-99-968-3166
Detent Plunger

999683166
MBEU167679: RNCC: 3 | RNVC: 2
MBEU167679: RNCC: 5 | RNVC: 2

8 May 2002

5340-99-985-9152
Angle Bracket

999859152
AX69927: RNCC: 3 | RNVC: 2
002OO-075: RNCC: 6 | RNVC: 9

16 Jan 2001

5340-99-973-3359
Multi-Purpose Strap

999733359
DM 130687: RNCC: 3 | RNVC: 2
MM1508A: RNCC: 6 | RNVC: 9
PSG3: RNCC: 6 | RNVC: 9

27 Nov 2000

5340-99-404-0142
Mechanic Equipment Hardware Kit

994040142
MS-2955-351: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-99-424-9907
Spring

994249907
NO PRIMARY REF 99-424-9907: RNCC: 3 | RNVC: 2
DEEA51803: RNCC: 5 | RNVC: 2
88411-400-240: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-521-4896
Mounting Bracket

995214896
A20503-34: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-547-7157
Angle Bracket

995477157
J21800059-001: RNCC: 3 | RNVC: 2

29 Jun 2000

5340-99-702-3262
Rod Connection

997023262
701275: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
G200-434439: RNCC: 6 | RNVC: 9

4 Dec 1996

5340-99-496-6255
Bracket Right Hand

994966255
110026-1165: RNCC: 3 | RNVC: 2
03019-001: RNCC: 6 | RNVC: 9

8 Jan 2003

5340-99-641-6407
Loop Clamp

996416407
STD2348-15: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-996-5523
Lever Bracket

999965523
6167099: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-99-996-1213
Mounting Plate

999961213
40008011: RNCC: 3 | RNVC: 2

6 Feb 2012

5340-99-868-3581
Pressure Ring

998683581
5152350: RNCC: 3 | RNVC: 2

8 May 2004

5340-99-957-6982
Connector Bracket

5340-99-128-3726

5340-99-886-2588
Mounting Bracket

998862588
333/R2125: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-99-215-6422
Swivel Assembl Clip

992156422
ESR0301: RNCC: 3 | RNVC: 2
FJ9615L1356: RNCC: 6 | RNVC: 9
(241)AE095ESR0301: RNCC: 8 | RNVC: 2
ESR0301: RNCC: 8 | RNVC: 2

9 Aug 1996

5340-99-330-2396
Mounting Plate

993302396
DR32741362DT: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-99-527-0975
Metallic Seal

995270975
SEALC1RCULARG1B: RNCC: 3 | RNVC: 2
SR435162: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-948-6755

5340-99-865-6269
Clamp

998656269
MDS2605A14: RNCC: 3 | RNVC: 2

12 Feb 2004

5340-99-994-1700
Access Cover

999941700
64677-82: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-99-995-4324
Strip Brush

999954324
14979B: RNCC: 3 | RNVC: 2
14979: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-99-983-9310
Mounting Bracket

999839310
00-1097-1101: RNCC: 3 | RNVC: 2

13 Dec 1990

5340-99-985-9652
Block Clamp

999859652
50050611: RNCC: 3 | RNVC: 2

2 Jan 2013

5340-99-988-2686
Silencer Clamp

999882686
33 02014 000: RNCC: 3 | RNVC: 2
FJ991OL0051: RNCC: 6 | RNVC: 9

7 Sep 1999

5340-99-220-9395

5340-99-221-0694

5340-99-215-9248
Mounting Plate

5340-99-758-0108
Engine Acce Bracket

5340-99-767-1961
Clamping Catch

5340-99-786-8852

5340-99-801-3684
Access Cover

5340-99-658-4093
Angle Bracket

996584093
NBU274: RNCC: 3 | RNVC: 2
NBU274: RNCC: 3 | RNVC: 9
NBM891: RNCC: 5 | RNVC: 2
NBM891: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-758-6329

5340-99-823-9174

5340-99-333-7686
Butt Hinge

993337686
1003S/ZP: RNCC: 3 | RNVC: 2
1003S: RNCC: 5 | RNVC: 1

23 Jun 1993

5340-99-139-8125
Angle Bracket

991398125
A2-6712: RNCC: 3 | RNVC: 2
UKSC4618: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-158-3028
Mounting Bracket

991583028
WG1412-9065-102: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-99-653-4320
Electrical-Mec Post

996534320
5C4-111699: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-814-1646
Access Cover

998141646
20284-191: RNCC: 3 | RNVC: 2

8 Feb 2011

5340-99-234-5724
Mounting Bracket

992345724
WG1518-1028-041: RNCC: 3 | RNVC: 2

23 Jul 2011

5340-99-988-8153
Bearing Retainer

999888153
WD4268-00141-103: RNCC: 3 | RNVC: 2
WD4268-00141-ITEM 2: RNCC: 5 | RNVC: 2

25 Oct 2001

5340-99-665-4350
Rod End Clevis

996654350
WG1410-9169-101: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-99-651-3426
Rod End Clevis

996513426
WG0045-0367-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-2221
Shock Mount Base

995622221
181/10703: RNCC: 3 | RNVC: 2
Z181/10703: RNCC: 5 | RNVC: 2
SM764C: RNCC: 6 | RNVC: 9

7 Jul 1999

5340-99-517-5822
Access Cover

995175822
NO PRIMARY REF 99-517-5822: RNCC: 3 | RNVC: 2
164343: RNCC: 5 | RNVC: 2
164343: RNCC: 5 | RNVC: 9
164343: RNCC: 6 | RNVC: 9

16 Nov 2010

5340-99-431-0198
Expansion Plug

994310198
0650713: RNCC: 3 | RNVC: 2
02/200003: RNCC: 5 | RNVC: 2
32418-108: RNCC: 5 | RNVC: 2
H700-430559: RNCC: 6 | RNVC: 9
X3XCPK0650713: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-458-8066
Mounting Plate

994588066
366-07042: RNCC: 3 | RNVC: 2

10 Aug 2001

5340-99-499-8213
End Closing Panel

994998213
1172-IK-DTL-00509: RNCC: 3 | RNVC: 2
02341-043: RNCC: 6 | RNVC: 9

10 Oct 2002

5340-99-152-9453
Mounting Bracket

991529453
6D60956-001: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-99-994-9657
Mounting Bracket

999949657
WG1382-0497-101: RNCC: 3 | RNVC: 2
118MF-013: RNCC: 6 | RNVC: 9

14 Dec 2011

5340-99-986-6795
Bracket Assembly

999866795
WG1573-0321-043: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-99-964-6275
Detent Plunger

999646275
NM34834: RNCC: 3 | RNVC: 2
GR1-16212: RNCC: 5 | RNVC: 2
FL18595: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-103-1433
Hinge Bracket

991031433
H13-15-84: RNCC: 3 | RNVC: 2
SRH13-15-84: RNCC: 5 | RNVC: 2
26SW2320: RNCC: 6 | RNVC: 9
26SW2320: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-738-3723
Machine Thread Plug

997383723
SS.01/F260/1147: RNCC: 3 | RNVC: 2
F260/1147: RNCC: 5 | RNVC: 1
F260/147: RNCC: 5 | RNVC: 1
SS.22.B/F.260/147: RNCC: 5 | RNVC: 2
H926-424383: RNCC: 6 | RNVC: 9
H926-488563: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-297-7119
Mounting Bracket

992977119
NO PRIMARY REF 99-297-7119: RNCC: 3 | RNVC: 2
MXC2342: RNCC: 5 | RNVC: 2
MXC2342-L: RNCC: 8 | RNVC: 1

15 May 2004

5340-99-437-0658
Protection Bellows

994370658
RB 9203/0250: RNCC: 3 | RNVC: 2
2-0000-3-1/9203: RNCC: 5 | RNVC: 1
14633033: RNCC: 5 | RNVC: 2
RB7954/0250: RNCC: 6 | RNVC: 9

24 Mar 2006

5340-99-301-7384
Bellows Assembly

993017384
B/9/AD/4/0300/01/18779: RNCC: 3 | RNVC: 2
B/AD/18779: RNCC: 5 | RNVC: 2

29 Aug 1996

5340-99-734-6396
Resilient Mount

997346396
JT22318: RNCC: 3 | RNVC: 2
Y/524/0020/M022 PART 111: RNCC: 5 | RNVC: 1
Y/524/0020/M022/111: RNCC: 5 | RNVC: 1
13/Y/524/0020/M022 PART 111: RNCC: 5 | RNVC: 2
13/Y/524/0020/M022/111: RNCC: 5 | RNVC: 2
22318: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-750-4494
Spring Tension Clip

997504494
36030: RNCC: 3 | RNVC: 2
10871731: RNCC: 5 | RNVC: 1
36030-50: RNCC: 5 | RNVC: 2
79178627: RNCC: 5 | RNVC: 2
9178627: RNCC: 5 | RNVC: 2
0492516: RNCC: 5 | RNVC: 2
10871731-4: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-790-0861
Snap Hook

997900861
5/01248/01/NG: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-639-5914
Loop Clamp

996395914
TY5409: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-632-9951
Double Angl Bracket

5340-99-192-9600
Screwed Spacer

5340-99-658-3785

5340-99-631-8092

5340-99-424-6789
Bracket

994246789
M5745786020000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-215-7569
Fork End

5340-99-460-5798

5340-99-223-6698

5340-99-459-9515
Plain Solid Disc

5340-99-223-4051

5340-99-460-2272

5340-99-223-0912
Bow Handle

5340-99-215-5341
Mounting Plate

5340-99-963-2896
Manual Contro Lever

999632896
FV681962: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-962-4439
Clamping Catch

999624439
FL2154SA: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-607-0351
Angle Bracket

996070351
EU62184: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-952-4005
Clamping Catch

999524005
SP59: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-949-9694
Bow Handle

999499694
H77: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-949-8654
Spring Tension Clip

999498654
1159A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-955-1495
Retaining Strap

999551495
RRA825343: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-955-1507
Spring Tension Clip

999551507
RRA826112: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-7806
Access Cover

999587806
25666697: RNCC: 3 | RNVC: 2
A2N25666697: RNCC: 5 | RNVC: 2
112740: RNCC: 5 | RNVC: 2

8 Nov 2012

5340-99-191-1489
Access Cover

991911489
332/C9740: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-99-960-5144
Dust And Moisture Seal Protective Plug

999605144
MR11076: RNCC: 3 | RNVC: 2
MR11076: RNCC: 5 | RNVC: 2
7E9605144: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-958-6586
Corrosion Preventive Anode

999586586
PPR100006: RNCC: 3 | RNVC: 2

15 Nov 2011

5340-99-958-2363
Angle Bracket

999582363
0208796: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-99-958-8540
Access Cover

999588540
60231961: RNCC: 3 | RNVC: 2

31 May 2013

5340-99-952-2600
Bow Handle

999522600
WTB179197: RNCC: 3 | RNVC: 2
B38490: RNCC: 5 | RNVC: 2
NAE127: RNCC: 5 | RNVC: 2
WTB179197: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-5144
Mtg Plt

999585144
M5725152900000: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-99-300-0996
Manual Control Handle

993000996
EU0905G021-041: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-99-553-1791
Rod End Clevis

995531791
EA4905G501-127: RNCC: 3 | RNVC: 2

28 Mar 2004

5340-99-216-2793
Access Cover

992162793
NO PRIMARY REF 99-216-2793: RNCC: 3 | RNVC: 2
4JT-15381-01: RNCC: 5 | RNVC: 2

21 May 2013

5340-99-179-6927
Rod End Clevis

991796927
22250922: RNCC: 3 | RNVC: 2
CV164971: RNCC: 5 | RNVC: 2

28 Apr 2009

5340-99-834-7749
Double Ward Key

998347749
80.0001.3165: RNCC: 3 | RNVC: 2
0927872: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-99-840-3036
Insert

998403036
UX7506RRA: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
F815 277916: RNCC: 6 | RNVC: 9

23 Apr 1996

5340-99-837-7749
Mounting Bracket

998377749
3821M004: RNCC: 3 | RNVC: 2

21 Dec 2012

5340-99-842-8210
Fork End

998428210
0E3213: RNCC: 3 | RNVC: 2
OE3213: RNCC: 5 | RNVC: 2
LV7RR0E3213: RNCC: 6 | RNVC: 9

4 Apr 1986

5340-99-262-1474
Double Angle Bracket

992621474
FV2249844: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-99-522-1497
Rubber Bumper

995221497
DGSHIPS001001600: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-141-5073
Clamp

991415073
TA713TD3X: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-255-5371
Vehicular Seat Bracket

992555371
HXX500160: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-99-333-2304
Barrel Bolt

993332304
9011: RNCC: 3 | RNVC: 1
41-688: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-661-8146
Mounting Plate

996618146
NKB316: RNCC: 3 | RNVC: 2
3750279: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-843-2846

5340-99-427-2723
Retaining Strap

994272723
BA62348: RNCC: 3 | RNVC: 2
BA62348: RNCC: 5 | RNVC: 9
36VV11978: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-951-1651

5340-99-951-0961

5340-99-956-5645
Protective Cap-Plug

5340-99-956-9201

5340-99-957-0715
Rubber Bumper

5340-99-329-3059
Spindle Clamp

993293059
33405: RNCC: 3 | RNVC: 2
4/33405: RNCC: 5 | RNVC: 2

29 Jun 1999

5340-99-463-6278
Electronic Equipment Hardware Kit

994636278
6041-412S: RNCC: 3 | RNVC: 2
6041-412 ITEM 23: RNCC: 5 | RNVC: 2
6041-412/23: RNCC: 5 | RNVC: 2
V6041-412/23: RNCC: 5 | RNVC: 2
V6041-412 ITEM 23: RNCC: 5 | RNVC: 2

24 Mar 1997

5340-99-390-9878
Expansion Shield

993909878
56-550: RNCC: 3 | RNVC: 1

25 Nov 1991

5340-99-302-1276
Mounting Bracket

993021276
RUB3983: RNCC: 3 | RNVC: 2
E002-706: RNCC: 6 | RNVC: 9
E007-706: RNCC: 6 | RNVC: 9

1 Dec 1997

5340-99-151-5858
Mounting Plate

991515858
28802-205: RNCC: 3 | RNVC: 2

5 Mar 2010

5340-99-947-9336
Access Cover

999479336
80-06-32-6419: RNCC: 3 | RNVC: 2

18 Dec 1978

5340-99-712-8496
Retaining Strap

997128496
Z172-EX 292: RNCC: 3 | RNVC: 2
6AA9656: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-808-2981
Loop Clamp

998082981
C69HBHBSF: RNCC: 3 | RNVC: 2
DP252: RNCC: 5 | RNVC: 1
5036-26: RNCC: 5 | RNVC: 2
0E9403: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-471-5150
Barrel Clamp

994715150
19213-176: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-99-418-3610
Mounting Bracket

994183610
EA3-75-5081: RNCC: 3 | RNVC: 2
26FZ-14584: RNCC: 6 | RNVC: 9
26FZ14584: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-474-6309
Headless Straight Rod

994746309
70-35-906-02: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-99-407-0111
Tee Hinge

994070111
BS1227-PART 1A TABLE 12: RNCC: 4 | RNVC: 1
1A1204: RNCC: 6 | RNVC: 9
PART 1A TABLE 12: RNCC: 6 | RNVC: 9
GA13628: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-716-1872
Spring Tension Clip

997161872
WD01-00-92061: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-272-3208
Mounting Bracket

992723208
38904-268: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-99-338-4819
Webbing Strap

993384819
5/1981: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-99-256-0108
Handwheel

992560108
F18299/7: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-99-757-8343
Loop Clamp

997578343
RSGU1.30/20-1: RNCC: 3 | RNVC: 2
04 AT 0226: RNCC: 5 | RNVC: 2
040WV-004: RNCC: 6 | RNVC: 9

18 Mar 2004

5340-99-304-1406
Pipe Hanger

993041406
SST/Y/576/32/T003/134: RNCC: 3 | RNVC: 2
001293389/134: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-297-7197
Blank Panel

992977197
97802: RNCC: 3 | RNVC: 2
50-60650: RNCC: 5 | RNVC: 2
619-558723: RNCC: 5 | RNVC: 2
FPA3-19-5: RNCC: 5 | RNVC: 2
TORNADO-4840: RNCC: 6 | RNVC: 9

1 Oct 2004

5340-99-542-4959
Dust And Moisture Seal Protective Cap

995424959
38337-105: RNCC: 3 | RNVC: 2
38337-105-2: RNCC: 5 | RNVC: 2
H474-437132: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-201-5444
Rod End Connector

992015444
NO PRIMARY REF 99-201-5444: RNCC: 3 | RNVC: 2
1GE15927U: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-800-0474
Rim Clenching Clamp

998000474
128638: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-807-4064
Comp Helical Spring

998074064
D1909: RNCC: 3 | RNVC: 2
0131533: RNCC: 5 | RNVC: 2
131533: RNCC: 5 | RNVC: 9
6MT12KSD1908: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-806-8058
Dust And Moisture Seal Boot

998068058
RS20: RNCC: 3 | RNVC: 2
7116894: RNCC: 5 | RNVC: 2
120095: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-836-9748
Plug Button

998369748
142158: RNCC: 3 | RNVC: 2
142158: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-837-7686
Loop Clamp

998377686
2481D004: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-99-806-7240
Seal Clamp

998067240
CCA35: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-848-9736

5340-99-837-2918
Webbing Strap

998372918
FV959474: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-2236
Resilient Mount

998382236
D6NNB453B: RNCC: 3 | RNVC: 2
3909754: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-838-8082
Retaining Strap

998388082
64275304: RNCC: 3 | RNVC: 2
37H6065: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-855-3095
Mounting Bracket

998553095
FV2288913: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-99-837-8498
Rod End Clevis

998378498
T6074B153: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-8216
Mounting Bracket

998388216
FV1017235: RNCC: 3 | RNVC: 2

10 Oct 1982

5340-99-858-1034
Carrying Case Strap

998581034
42C05836R06: RNCC: 3 | RNVC: 2
NTN5574A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-534-5845
Threaded End Tensioning Tie Rod

995345845
YJ20333A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-854-9442
Mounting Bracket

998549442
42213259: RNCC: 3 | RNVC: 2

12 Dec 2004

5340-99-814-0270
Handle Grip

998140270
SCH739: RNCC: 3 | RNVC: 2
TYPE6: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-838-8789
Loop Clamp

998388789
FV.1016682: RNCC: 3 | RNVC: 2
FV1016682: RNCC: 5 | RNVC: 2

19 Feb 1991

5340-99-858-2198
Bracket

998582198
M5755164420000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-835-0830

5340-99-858-9159
Vent Plug

998589159
NE41744: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-99-858-2226
Mounting Plate

998582226
40003868: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-99-208-9489
Quick Release Pin

5340-99-208-9203

5340-99-443-0072
Castor

5340-99-461-9684
Retaining Strap

5340-99-625-0679

5340-99-425-2535

5340-99-386-6593
Dust Protective Cap

5340-99-384-7286

5340-99-417-0792

5340-99-252-3772
Fork

5340-99-467-8951
Butt Hinge Leaf

994678951
8N2977: RNCC: 3 | RNVC: 2
26TA20207: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-611-7234
Protection Bellows

996117234
817926: RNCC: 3 | RNVC: 2
TORNADO 8353: RNCC: 6 | RNVC: 9

12 Jun 2002

5340-99-254-1602
Turnbuckle

992541602
S05.GBX.0002: RNCC: 3 | RNVC: 2
SPD.S05.GBX.0002: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-668-8396
Attach Brkt Aft Otb

996688396
M5725907920100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-604-1267
Loop Clamp

996041267
STD2046-27-22: RNCC: 3 | RNVC: 2
STD2046-27-22: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-598-7427
Access Cover

995987427
NO PRIMARY REF 99-598-7427: RNCC: 3 | RNVC: 2
FEN-NG-035: RNCC: 5 | RNVC: 2

30 Apr 1993

5340-99-619-1604
Loop Clamp

996191604
VGS380-837: RNCC: 3 | RNVC: 2
26WA50012: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-152-6143
Mounting Bracket

991526143
AH-F04-1024: RNCC: 3 | RNVC: 1
5368-290: RNCC: 5 | RNVC: 1
AH-F04-1024: RNCC: 5 | RNVC: 1

22 Sep 2011

5340-99-149-3450
Threaded End Tensioning Tie Rod

991493450
115033SHT491: RNCC: 3 | RNVC: 2
115033SHT491: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-148-0481
Cp23b

991480481
21C1228825: RNCC: 3 | RNVC: 2

8 May 2008

5340-99-152-1839
Access Cover

991521839
14574407: RNCC: 3 | RNVC: 2
CV184665: RNCC: 5 | RNVC: 2
VOE14574407: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-99-152-0838
Bracket Assy

991520838
M5755140900000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-918-5155
Manual Control Handle

999185155
332/A5708: RNCC: 3 | RNVC: 2

21 Oct 2010

5340-99-544-3664
Access Cover

995443664
RUB3176: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-500-4498
Spring Holder

995004498
3946B030: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-99-477-6666
Angle Bracket

994776666
AS48126: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-99-474-4841
Push Button Clip

994744841
E864309S: RNCC: 3 | RNVC: 2
E864309: RNCC: 5 | RNVC: 1

15 Apr 1999

5340-99-134-8852
Mounting Plate

991348852
FV2283876: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-99-950-7408
Electrical-Mec Post

999507408
17-90570: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-962-0859
Handle Grip

999620859
AN2410: RNCC: 3 | RNVC: 2
M3AN2410: RNCC: 6 | RNVC: 9

20 Dec 1979

5340-99-300-4391
Retaining Strap

993004391
10-55-889: RNCC: 3 | RNVC: 2

12 May 2009

5340-99-950-5209
Bow Handle

999505209
B116525: RNCC: 3 | RNVC: 2

20 Dec 1979

5340-99-136-7463
Rim Lock

991367463
104C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-010-0692
Mounting Plate

990100692
507547: RNCC: 3 | RNVC: 2
FL953DM0001: RNCC: 6 | RNVC: 9

16 Oct 1995

5340-99-380-1380
Diffuser Cap

993801380
31211-445: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-99-138-5900
Buckle

991385900
AML10757: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-138-4181
Unit Eye

991384181
0EA0416: RNCC: 3 | RNVC: 2
62S20039: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-138-4361
Screw Thread Insert

5340-99-962-6916
Bow Handle

999626916
0S84269: RNCC: 3 | RNVC: 2
FR16B1217: RNCC: 5 | RNVC: 2

20 Dec 1979

5340-99-966-3793
Retaining Clip

999663793
946 105 05: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-962-4378
Strap

5340-99-932-0555
Bow Handle

5340-99-932-3868

5340-99-961-2289

5340-99-720-8137
Dust And Moisture Seal Boot

997208137
BTR1698: RNCC: 3 | RNVC: 2
MTC6392: RNCC: 5 | RNVC: 2
MTC5892: RNCC: 5 | RNVC: 2
BTR1698-L: RNCC: 8 | RNVC: 1
(241)AE095BTR1698: RNCC: 8 | RNVC: 2
BTR1698: RNCC: 8 | RNVC: 2

25 Apr 1991

5340-99-143-4801
Angle Bracket

991434801
SST/M/701/09/0001/058: RNCC: 3 | RNVC: 2
SST/M/701/09/0001/104: RNCC: 5 | RNVC: 1
001303839/104: RNCC: 5 | RNVC: 1
001303839/058: RNCC: 5 | RNVC: 2
001303839/104 PART 324: RNCC: 5 | RNVC: 2
001303839 SHEET 058: RNCC: 5 | RNVC: 2
SST/M/701/09/0001/104 PART 324: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-016-8217
Guide And Bracket A

990168217
95K-GD00-001-AAA: RNCC: 3 | RNVC: 2
95KGD00001AAA: RNCC: 5 | RNVC: 2

15 May 1990

5340-99-282-1033
Mounting Bracket

992821033
3201-85427-20-2-01: RNCC: 3 | RNVC: 2
3201-85427-20-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-400-8000
Mounting Bracket

994008000
59-34-109: RNCC: 3 | RNVC: 2
0059109: RNCC: 5 | RNVC: 2

7 Feb 1999

5340-99-190-7137
Antipilferage Seal

991907137
RQM-MOD-TEL: RNCC: 3 | RNVC: 2
GAMA5A4: RNCC: 6 | RNVC: 9

27 Feb 2004

5340-99-633-7677
Screw Thread Insert

996337677
GW4831105-2054: RNCC: 1 | RNVC: 2
3585-04CNX0.168IN: RNCC: 3 | RNVC: 1
B14352: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-782-6678
Mounting

997826678
331/25996: RNCC: 3 | RNVC: 2

31 Mar 2003

5340-99-200-1844
Plain Solid Disc

992001844
FW1009-18: RNCC: 3 | RNVC: 2
FW1009-18: RNCC: 5 | RNVC: 9
42QR678: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-969-2235
Double Angle Bracket

999692235
904803-0100-020: RNCC: 3 | RNVC: 2
904803-0100-020: RNCC: 5 | RNVC: 2

17 Mar 2006

5340-99-650-2591
Mounting Assembly

996502591
0693D18004-043: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-99-607-3155
Grooved Clamp Coupling

996073155
C15715-5J: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-436-1872
Nut And Bolt Locking Plate

994361872
4-3: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-99-787-2617
Detent Plunger

997872617
7951213: RNCC: 3 | RNVC: 2
6700665 ITEM 8: RNCC: 5 | RNVC: 2
A01101 ITEM 8: RNCC: 5 | RNVC: 2
Z342/1 ITEM 8: RNCC: 5 | RNVC: 2
A31414: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-744-4394
Dust And Moisture Seal Protective Cap

997444394
E.C.H.-12/0.5F: RNCC: 3 | RNVC: 2
H.E.C/21/80: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-661-8346
Angle Bracket

996618346
PT2568-3-750646: RNCC: 3 | RNVC: 2
660-02-750646-000-18: RNCC: 5 | RNVC: 2
660-03-750646-000-18: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-159-5225
Mounting Bracket

991595225
L06566400: RNCC: 3 | RNVC: 2
L06567900 ITEM 4: RNCC: 5 | RNVC: 2
L06567900/4: RNCC: 5 | RNVC: 2

15 Aug 2007

5340-99-661-8461
Retaining Band

996618461
FV958918: RNCC: 3 | RNVC: 2
503/2/13091/000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-776-5595
Engine Moun Bracket

997765595
503/7/15956/000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-721-5469
Manual Control Handle

997215469
MBEU 92930: RNCC: 3 | RNVC: 2
CMBEU 92930: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-99-811-2082
Coil

5340-99-759-2971
Extens Drawer Slide

5340-99-832-5485

5340-99-558-6163
Cable Guide

995586163
DM32920: RNCC: 3 | RNVC: 2
EM327081TEM7: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-839-2138

5340-99-840-0954

5340-99-205-1002
Fork End

5340-99-201-2257

5340-99-412-7770

5340-99-412-7780
Screw Thread Insert

5340-99-151-9264
Mounting Bracket

991519264
80030829: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-99-373-1042
Rim Lock

993731042
FS1: RNCC: 3 | RNVC: 1

7 Jun 2001

5340-99-862-1171

5340-99-978-3889
Connector Cover

5340-99-849-9077
Compression Helical Spring

998499077
233449: RNCC: 3 | RNVC: 2
7RU233449: RNCC: 6 | RNVC: 9
61RV20226: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-833-4916
Access Cover

998334916
7095802: RNCC: 3 | RNVC: 2
LV7BD7095802: RNCC: 6 | RNVC: 9
61BE20231: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-814-1764
Access Cover

998141764
2 0060-229: RNCC: 3 | RNVC: 2

11 Feb 2011

5340-99-663-8059
Actuator Rod

996638059
154 9057: RNCC: 3 | RNVC: 2

23 Sep 1997

5340-99-101-7542
General Purpose Resilient Mount

991017542
RU30231A: RNCC: 3 | RNVC: 2
RU30231A: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-99-987-6005
Double Angle Bracket

999876005
CK0515180: RNCC: 3 | RNVC: 2
CK0515180: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-99-985-9484
Webbing Strap

999859484
FV2297255: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-99-972-8564
Rim Lock Key

999728564
FKH4: RNCC: 3 | RNVC: 1
ASWE17166R: RNCC: 4 | RNVC: 1
B221061: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-987-6383
Retaining Strap

999876383
40000792: RNCC: 3 | RNVC: 2

11 Feb 2011

5340-99-975-7099
Mounting Bracket

999757099
202-36442: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-99-613-2375
Webbing Strap

996132375
E15083/M10: RNCC: 3 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

7 Apr 2006

5340-99-981-0408
Multiple Angle Bracket

999810408
63832: RNCC: 3 | RNVC: 2

24 Nov 2008

5340-99-988-3726
Rim Clenching Clamp

999883726
3513 930 80001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-987-5844
Mounting Bracket

999875844
70-76-922: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-99-702-0609
Pipe Hanger

997020609
110003-23678: RNCC: 3 | RNVC: 2
26VC-6940: RNCC: 6 | RNVC: 9

13 Aug 2004

5340-99-133-7562
Mounting Bracket

991337562
TPN423: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-99-361-5154
Butt Hinge

993615154
DLH861: RNCC: 3 | RNVC: 2

24 May 2005

5340-99-613-7726
Bracket

996137726
M5755476620000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-975-9803
Pad Eye

999759803
ND2704: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-99-976-1919
Angle Bracket

999761919
FV 2219219: RNCC: 3 | RNVC: 2
FG970840002: RNCC: 6 | RNVC: 9

7 May 1997

5340-99-214-3444

5340-99-219-1612
Angle Bracket

5340-99-901-5308
Loop Clamp

999015308
P77818: RNCC: 3 | RNVC: 2
P77818: RNCC: 5 | RNVC: 2
25L14911: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-827-6051
Strap Retaining Ass

998276051
FV858168: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-5618
Starter Heat Shield

998265618
CV2588: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-2184
Cushioning Pad

998282184
FV 781416: RNCC: 3 | RNVC: 2

30 May 1990

5340-99-912-0238
Present Indicator

999120238
315P6210: RNCC: 3 | RNVC: 2
EFE 1516: RNCC: 5 | RNVC: 2

30 Sep 2002

5340-99-827-6182
Loop Clamp

998276182
FV 834281: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-1112
Access Cover

998241112
FV731919: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-5594
Rod End Connector

998245594
FV630122: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9263
Loop Clamp

998269263
FV939230: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-99-829-0244
Retaining Strap

998290244
FV 839265: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-6301
Webbing Strap

998306301
FV757654: RNCC: 3 | RNVC: 2
005574: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-824-3165
Mounting Bracket

998243165
FV731936: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-909-6463
Adapter

999096463
64201-82: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-99-822-9705
Rod End Clevis

998229705
FV736231: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-6114
Angle Bracket

998236114
2693566: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-822-6515
Loop Clamp

998226515
FV742391: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-3103
Clip Assembly

998293103
FV852548: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-3642
Resilient Mount

998233642
FV716459: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-7865
Loop Clamp

998297865
FV 873644: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9132
Angle Bracket

998269132
FV799550: RNCC: 3 | RNVC: 2
CV6372: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-824-9788
Manual Control Lever

998249788
591998: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results