What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 95 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 95 of 368

5340-99-133-7099
Mounting Bracket As

991337099
561/1/29137/000: RNCC: 3 | RNVC: 2

8 May 2006

5340-99-883-6087
Cylinder

998836087
NO PRIMARY REF 99-883-6087: RNCC: 3 | RNVC: 2
B-1-1C: RNCC: 5 | RNVC: 2
C57670T279539: RNCC: 6 | RNVC: 9

20 Jun 2002

5340-99-112-3271
Dust And Moisture Seal Protective Cap-Plug

991123271
SP33002: RNCC: 3 | RNVC: 2
966811: RNCC: 5 | RNVC: 1
23336-302-002: RNCC: 5 | RNVC: 2
23246-00741: RNCC: 5 | RNVC: 2
N171322-15: RNCC: 5 | RNVC: 2
9103230002: RNCC: 5 | RNVC: 2
5SA3010-2: RNCC: 5 | RNVC: 2
B88887: RNCC: 5 | RNVC: 2
AQ330-2: RNCC: 5 | RNVC: 2
26DK12153: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-614-1602
Rod End Clevis

996141602
WG1397-0228-105: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-107-2158
Helical Compression Spring Seat

991072158
EH1116: RNCC: 3 | RNVC: 2
B21-32-1116: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-000-5486
Mounting Bracket

990005486
WG1579-0075-041: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-99-344-3331
Handle

993443331
1608-1029: RNCC: 3 | RNVC: 2
FL982TF0183: RNCC: 6 | RNVC: 9

24 Feb 1999

5340-99-149-8880
Water Fitting

991498880
G1Z1135E00-01: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-99-907-6440
Loop Clamp

999076440
VGS380-1205: RNCC: 3 | RNVC: 2
26VC22264: RNCC: 6 | RNVC: 9

18 Jan 2002

5340-99-852-8819
Truss Fairlead

998528819
EA5300V034-003: RNCC: 3 | RNVC: 2
QE971MEQ032: RNCC: 6 | RNVC: 9

25 Jun 1997

5340-99-832-3516
Insert

998323516
199304: RNCC: 3 | RNVC: 2
B4288: RNCC: 5 | RNVC: 2
SR1500-32332: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-99-882-5298
Slam Latch

998825298
74-001378: RNCC: 3 | RNVC: 2
8251608415: RNCC: 5 | RNVC: 2

5 Nov 2009

5340-99-835-0301
Loop Clamp

998350301
CZB104: RNCC: 3 | RNVC: 2
RTC637: RNCC: 5 | RNVC: 2
51100937: RNCC: 5 | RNVC: 2
51100937: RNCC: 5 | RNVC: 2
5076-025: RNCC: 5 | RNVC: 2
AS51765-20: RNCC: 5 | RNVC: 2
CZB104W25: RNCC: 5 | RNVC: 2
12743: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-549-0333
Block Fairlead Section

995490333
ER2521B175-109: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-881-8076
Quick Release Pin

998818076
NO PRIMARY REF 99-881-8076: RNCC: 3 | RNVC: 2
623: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-931-0047
Mounting Bracket

999310047
J35400211-001: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-99-352-5506
Mounting Bracket

993525506
5182-11-029: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-99-897-2864
Light Bracket

998972864
331/30743: RNCC: 3 | RNVC: 2

31 Mar 2003

5340-99-257-8656
Toggle Hook

992578656
1338/004: RNCC: 3 | RNVC: 2
BW211192: RNCC: 5 | RNVC: 2
1338B: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-99-811-9319
Mounting Bracket

998119319
NB-51-B-247: RNCC: 3 | RNVC: 2

23 Feb 1998

5340-99-548-8271
Compression He Seat

995488271
NO PRIMARY REF 99-548-8271: RNCC: 3 | RNVC: 2
2860: RNCC: 5 | RNVC: 1
2860-3507-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-792-7126
Catch Strike

997927126
P-212230-003: RNCC: 3 | RNVC: 2
P212230-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-748-6335
Handwheel

997486335
SSN.04/5CS ITEM 6: RNCC: 3 | RNVC: 2
200.01/601/7 ITEM 22: RNCC: 5 | RNVC: 1
200.01/601/7/22: RNCC: 5 | RNVC: 1
5CS ITEM 6: RNCC: 5 | RNVC: 1
SSN.02/200.01/601/7 ITEM 22: RNCC: 5 | RNVC: 2
SSN.02/200.01/601/7/22: RNCC: 5 | RNVC: 2
H926-704619: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-215-3441
Spla Recovery Strap

5340-99-798-8803
Loop Clamp

997988803
CV7353: RNCC: 3 | RNVC: 2
FV 800806 ITEM 10: RNCC: 5 | RNVC: 2

20 Jan 1986

5340-99-005-0615
Clamp

990050615
4282M: RNCC: 3 | RNVC: 2
FF9530C0080: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-638-8043
Dust And Moisture Seal Protective Cap-Plug

996388043
473513C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-350-8780
Mounting Plate

993508780
FV 2182035D: RNCC: 3 | RNVC: 2
FV 2182035D: RNCC: 5 | RNVC: 2

19 Jun 1995

5340-99-721-6787
Grooved Clamp Coupling Ferrule

997216787
RU12729: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-99-861-0415
Mounting Plate

998610415
332/H7156: RNCC: 3 | RNVC: 2

30 May 2012

5340-99-131-8397
Loop Clamp

991318397
FV 2240540: RNCC: 3 | RNVC: 2
FV 2240540: RNCC: 5 | RNVC: 2

9 Jan 2004

5340-99-710-5583
Retaining Strap

997105583
P74164: RNCC: 3 | RNVC: 2
P74164: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-423-1961
Loop Clamp

994231961
40000796: RNCC: 3 | RNVC: 2

11 Feb 2011

5340-99-438-5135
Section Block Clamp

994385135
6508251: RNCC: 3 | RNVC: 2
B6508251: RNCC: 5 | RNVC: 2
27FR32848: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-707-3789
Access Cover

997073789
14352838: RNCC: 3 | RNVC: 2
CV189240: RNCC: 5 | RNVC: 2

2 Apr 2013

5340-99-052-0893
Plunger Assembly

990520893
FV2206914: RNCC: 3 | RNVC: 2

21 Feb 1997

5340-99-701-6969
Dust And Moisture Seal Protective Cap

997016969
818068: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-99-668-6441
Access Cover

996686441
25666693: RNCC: 3 | RNVC: 2
112745: RNCC: 5 | RNVC: 2
A2N25666693: RNCC: 5 | RNVC: 2

8 Nov 2012

5340-99-510-0657
Manual Control Lever

995100657
110028SHT2079: RNCC: 3 | RNVC: 2
26VC-8956: RNCC: 6 | RNVC: 9

13 Mar 2002

5340-99-601-1692
Swivel Castor

996011692
TH5RTWRB: RNCC: 3 | RNVC: 2
TSH125RUIH: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-533-1253
Mounting Bracket

995331253
16791333: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-507-3667
Webbing Strap

995073667
MODSOLCS01B: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-99-262-7511
Mechanic Equipment Hardware Kit

992627511
BXOTBKIT0000012: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-99-643-3195
Escutcheon Plate

996433195
B38688: RNCC: 1 | RNVC: 2
HS375: RNCC: 3 | RNVC: 1
CA19: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-224-4605
Stud

992244605
534670: RNCC: 3 | RNVC: 2
71A608: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-351-4050
Latch Rh.

993514050
1YMA10257: RNCC: 3 | RNVC: 2
022TZ-044: RNCC: 6 | RNVC: 9

3 Oct 2002

5340-99-422-3480

5340-99-413-5026
Loop Clamp

5340-99-415-5223

5340-99-422-3403

5340-99-143-2479
Mounting Bracket

991432479
110003-40575: RNCC: 3 | RNVC: 2
110003-40575: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-242-9465
Shim

992429465
79008: RNCC: 3 | RNVC: 2
CV144215: RNCC: 5 | RNVC: 2

30 Jun 2010

5340-99-188-6013
Loop Clamp

991886013
EF811A34: RNCC: 1 | RNVC: 2
11944PH34Y: RNCC: 3 | RNVC: 2
TA028M014NB34: RNCC: 3 | RNVC: 2
TA028M014NB34: RNCC: 5 | RNVC: 2
11944PH34Y: RNCC: 5 | RNVC: 2

22 Jul 2013

5340-99-603-6066
Retaining Strap

996036066
F277306: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-369-1631
Mounting Bracket

993691631
A7121090: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-99-650-5027

5340-99-222-0481

5340-99-619-3424

5340-99-250-5142
Rubber Bumper

5340-99-961-3662
Access Cover

999613662
FV2284620: RNCC: 3 | RNVC: 2

30 May 2008

5340-99-963-7317
Detent Plunger

999637317
MM420: RNCC: 3 | RNVC: 2
0MM420: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-822-7046
Resilient Mount

998227046
55300947: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-964-3275
Loop Clamp

999643275
0S86962: RNCC: 3 | RNVC: 2
0C9127A118: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-963-5651
Access Cover

999635651
MM2116: RNCC: 3 | RNVC: 2
0MM2116: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-932-7156
Anten Minor Bracket

999327156
3513 900 40312: RNCC: 3 | RNVC: 2
3513 900 40311: RNCC: 6 | RNVC: 9

12 Apr 1996

5340-99-943-1682
Bow Handle

999431682
WTB118827: RNCC: 3 | RNVC: 1
B27146: RNCC: 5 | RNVC: 2

29 May 1980

5340-99-942-7696
Anode End Fairing

999427696
2100121: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-99-963-4439
Nonmetallic Bushing

999634439
2W81036C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-940-2911
Retaining Strap

999402911
BS31: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-729-7354
Angle Bracket

997297354
FV2268289: RNCC: 3 | RNVC: 2

9 May 2007

5340-99-756-5362
Locking Clip

997565362
HUMZ3382: RNCC: 3 | RNVC: 2
HU3382: RNCC: 5 | RNVC: 2
HUMS3382: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-728-3942
Wear Pad

997283942
259-84800: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-726-5331
Bracket Assy

997265331
M5755182100100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-726-5283
Mounting Bracket

997265283
E16439: RNCC: 3 | RNVC: 2

4 Apr 2011

5340-99-415-4733

5340-99-151-1027
Access Cover

5340-99-196-2341

5340-99-613-3030
Mounting Bracket

996133030
80030801: RNCC: 3 | RNVC: 2

17 May 2007

5340-99-103-2128
Hinge Bracket

991032128
H12-15-441: RNCC: 3 | RNVC: 2
SRH12-15-441: RNCC: 5 | RNVC: 2
26SW803: RNCC: 6 | RNVC: 9
26SW803: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-781-5860
Angle Bracket

997815860
A3990/89255: RNCC: 3 | RNVC: 2
3990/89255: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-339-4884
Mounting Plate

993394884
AL103084/20: RNCC: 3 | RNVC: 2

3 Aug 2005

5340-99-801-9066
Backstrap Assembly

998019066
A3/28410: RNCC: 3 | RNVC: 2
28410: RNCC: 5 | RNVC: 2
A3/28410: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-435-1824
Rod End Clevis

994351824
SRH13-15-101: RNCC: 3 | RNVC: 2
H13-15-101: RNCC: 5 | RNVC: 2
26SW3128: RNCC: 6 | RNVC: 9
26SW3128: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-204-9290
Rigid Caster

992049290
THR12PTRB: RNCC: 3 | RNVC: 2
SK10-80: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-323-6885
Access Cover

993236885
331/24720: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-99-387-3071
Loop Clamp

993873071
40002222: RNCC: 3 | RNVC: 2

11 May 2010

5340-99-781-0800
Dus Protective Plug

5340-99-795-2120

5340-99-788-2157

5340-99-793-7067
Strap Hook Plate

5340-99-767-8637

5340-99-764-5571
Retaining Strap

5340-99-787-9150

5340-99-913-5288

5340-99-782-8435
Panel-Dummy

5340-99-626-1028
Angle Bracket

996261028
3AB20585: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-814-6193
Rod End Clevis

998146193
WG1383-0448-103: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-99-119-0932
Dust And Moisture Seal Protective Cap-Plug

991190932
62GB738-08: RNCC: 3 | RNVC: 2
042441: RNCC: 5 | RNVC: 2
SC220710-464: RNCC: 5 | RNVC: 2
406713: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-477-7615
Bow Handle

994777615
EU5342C716-041: RNCC: 3 | RNVC: 2

28 Apr 2010

5340-99-604-0924
Loop Clamp

996040924
STD2045-24-22: RNCC: 3 | RNVC: 2
STD2045-24-22: RNCC: 5 | RNVC: 9
99PG01531: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-795-4673
Webbing Strap

997954673
AF2-003: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-3217
Loop Clamp

997953217
NO PRIMARY REF 99-795-3217: RNCC: 3 | RNVC: 2
417SS5: RNCC: 5 | RNVC: 2
36TR-334: RNCC: 6 | RNVC: 9

20 Oct 2004

5340-99-442-1752
Castor

994421752
NO PRIMARY REF 99-442-1752: RNCC: 3 | RNVC: 2
2823HD1: RNCC: 5 | RNVC: 2
4G8072: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-615-3299
Butt Hinge

996153299
KB538K0948-001: RNCC: 3 | RNVC: 2
KB538K0948-001: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-453-9329
Moun Plate Assembly

994539329
EU5330B100-043: RNCC: 3 | RNVC: 2

29 Aug 1997

5340-99-794-8629
Mounting Bracket

997948629
FV3002502: RNCC: 3 | RNVC: 2
950-06-01-959: RNCC: 5 | RNVC: 2

26 Nov 1991

5340-99-391-2827
Grooved Clamp Coupling

993912827
30800-200: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-99-545-5145
Helical Compression Spring Seat

995455145
JV7-15: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-616-8202
Bridge Clamp

996168202
NO PRIMARY REF 99-616-8202: RNCC: 3 | RNVC: 2
G17006: RNCC: 5 | RNVC: 2
G17006: RNCC: 5 | RNVC: 9

10 Feb 2011

5340-99-606-6527
Grooved Clamp Coupling

996066527
B408663: RNCC: 3 | RNVC: 2
BA49550-11: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-813-1499
Mounting Bracket

998131499
WG1510-3160-041: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-99-441-2740
Extension Drawer Slide

994412740
5012CN: RNCC: 3 | RNVC: 1
124-3040-876: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-209-0531
Dust And Moisture Seal Protective Cap-Plug

992090531
HTE7160-E: RNCC: 3 | RNVC: 2
1Z9-BH-10151-4-002: RNCC: 5 | RNVC: 2
TORP4B2: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-016-8718
Handwheel

990168718
LF1155-191-FBUC: RNCC: 3 | RNVC: 2
LF1155: RNCC: 5 | RNVC: 1
LF1155-191: RNCC: 5 | RNVC: 1

3 Jul 1996

5340-99-591-2676
Block Clamp

995912676
MX/00087/AL/244: RNCC: 3 | RNVC: 2
004471312: RNCC: 5 | RNVC: 2

5 Aug 1993

5340-99-799-3076
Spacing Threaded Standoff

997993076
PT0147-4-700192: RNCC: 3 | RNVC: 2
620/2/15252/000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-748-1563
Handwheel

997481563
MBEU-63077-403: RNCC: 3 | RNVC: 2
A/MBEU-63077-403: RNCC: 5 | RNVC: 2
MBEU63077-403: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-396-1534
Rod End Clevis

993961534
FV1065141: RNCC: 3 | RNVC: 2
503-2-15240/000: RNCC: 5 | RNVC: 2
FE970T70003: RNCC: 6 | RNVC: 9

8 Jan 1998

5340-99-749-8147
Dust And Moisture Seal Protective Cap

997498147
01T-C-12248: RNCC: 3 | RNVC: 2
01TC12248: RNCC: 5 | RNVC: 2
01T-C-12248: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-328-8398
Spring Tension Clip

993288398
82-037: RNCC: 3 | RNVC: 2
GM-D114256 ITEM 4: RNCC: 5 | RNVC: 2

14 Aug 1991

5340-99-146-5436
Angle Bracket

991465436
S6120-64174-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-256-7513
Webbing Strap

992567513
01155-1-OL0.75M-NG: RNCC: 3 | RNVC: 2
P72/900/053: RNCC: 5 | RNVC: 2

17 May 2013

5340-99-577-4443
Runner

995774443
420-680-006: RNCC: 3 | RNVC: 2

28 Mar 2011

5340-99-515-2426
Line Supporting Strap

995152426
NO PRIMARY REF 99-515-2426: RNCC: 3 | RNVC: 2
233-235: RNCC: 5 | RNVC: 2
826/11298: RNCC: 5 | RNVC: 2

15 Jun 2012

5340-99-351-4277
Mounting Bracket

993514277
TAC-FE-MK3-64206: RNCC: 3 | RNVC: 2
CEL/20449: RNCC: 5 | RNVC: 2
SPCISR/09/02/101/05/03: RNCC: 6 | RNVC: 9

22 Apr 2009

5340-99-559-0892
Nut

995590892
SS22-253-112: RNCC: 3 | RNVC: 2
J209-939444: RNCC: 6 | RNVC: 9

24 Oct 1990

5340-99-834-8170
Webbing Strap

998348170
SE100182-640: RNCC: 3 | RNVC: 9
SE100182A640: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-788-8508
Webbing Strap

997888508
TS60-0259713: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-99-878-8661
Mounting Bracket

998788661
GD601483-03: RNCC: 3 | RNVC: 2

7 Sep 2010

5340-99-647-3848
Block Fairlead

996473848
P-721046-401: RNCC: 3 | RNVC: 2
P721046-401: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-777-1405
Access Cover

997771405
001279408 SHEET 016: RNCC: 3 | RNVC: 1
M/112/90/0001 SHEET 016 TYPE F: RNCC: 5 | RNVC: 1
M/112/90/0001 SHEET 016: RNCC: 5 | RNVC: 1
SSK/M/112/90/0001 SHEET 016: RNCC: 5 | RNVC: 1
SSK/M/112/90/0001 SHEET 016 TYP-: RNCC: 5 | RNVC: 1
001279408 SHEET 016 TYPE F: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-251-5540
Handwheel

992515540
001279635 SHEET 032: RNCC: 3 | RNVC: 2
001279635: RNCC: 5 | RNVC: 1
004460822: RNCC: 5 | RNVC: 1
MX/00280/SL/024: RNCC: 5 | RNVC: 1
SSK/M/510/60/0010: RNCC: 5 | RNVC: 1
001279635/032: RNCC: 5 | RNVC: 2
SSK/M/510/60/0010 SHEET 032: RNCC: 5 | RNVC: 2
SSK/M/510/60/0010/032: RNCC: 5 | RNVC: 2
CRISP/ISIS RECON 6: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-855-1460
Spring Tension Clip

998551460
LS.101/12S-B: RNCC: 3 | RNVC: 2
LS.101/12S-BLACK: RNCC: 5 | RNVC: 2
507810: RNCC: 5 | RNVC: 2

18 Jan 2010

5340-99-852-8198
Clamp

998528198
2177-00094: RNCC: 3 | RNVC: 2
2177-00094-20-3: RNCC: 5 | RNVC: 2

8 Jan 1990

5340-99-715-2545
Line Supporting Strap

997152545
LK0A: RNCC: 3 | RNVC: 2
916372K: RNCC: 5 | RNVC: 2
PC.23954/11: RNCC: 5 | RNVC: 2
915/4/08059/005-B: RNCC: 5 | RNVC: 2
998/4/83883/001: RNCC: 5 | RNVC: 2
LKOB-N66-NA: RNCC: 5 | RNVC: 2
916372: RNCC: 5 | RNVC: 2
5340-99-788-4367: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-143-5143
Webbing Strap

991435143
01802-2-01414: RNCC: 3 | RNVC: 1
AB/1/6/1202: RNCC: 5 | RNVC: 2
MM8158: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-252-5497
Webbing Strap

992525497
3201-88770-01-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-560-4420
Access Cover

995604420
SSN07M590-60-3-16: RNCC: 3 | RNVC: 2
M590-60-3-216: RNCC: 5 | RNVC: 1
M590-60-3-16: RNCC: 5 | RNVC: 1
SSN13M590-60-3-216: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-026-2507
Loop Clamp

990262507
FV 2019124/2: RNCC: 3 | RNVC: 2
FV 2019124: RNCC: 5 | RNVC: 1

28 Jun 1990

5340-99-720-9240
Electrical-Mec Post

5340-99-469-6618

5340-99-663-6595
Shutter

5340-99-720-2872
Screw Thread Insert

5340-99-721-7837

5340-99-721-9439
Clip

5340-99-661-1843
Retaining Strap

5340-99-721-2996

5340-99-530-0244
Screw Thread Insert

5340-99-000-7689
Clip

5340-99-001-3583

5340-99-128-3867

5340-99-198-2748
Dust And Moisture Seal Protective Plug

991982748
OE49020: RNCC: 3 | RNVC: 2
POE49020: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-900-1337
Access Cover

999001337
RRA513440: RNCC: 3 | RNVC: 2
RRA513440: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-900-1411
Retaining Strap

999001411
RRA514027: RNCC: 3 | RNVC: 2
RRA514027: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-911-1887
Buffer Support

999111887
110679-653: RNCC: 3 | RNVC: 2
110679-653: RNCC: 5 | RNVC: 9
110679-653: RNCC: 6 | RNVC: 9
XP98PA01108: RNCC: 6 | RNVC: 9

16 Jan 1998

5340-99-841-0409
Butt Hinge

998410409
FV2253717: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-99-958-5840
Spacing Threaded Standoff

999585840
FV2310963: RNCC: 3 | RNVC: 2

18 May 2011

5340-99-419-3000
Retaining Strap

994193000
SDA139807: RNCC: 3 | RNVC: 2
SDA139807: RNCC: 5 | RNVC: 9
Z1ZA53999: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-396-8933
Protection Bellows

993968933
CFT43873: RNCC: 3 | RNVC: 2

25 May 1999

5340-99-837-1749
Retaining Strap

998371749
CL6528: RNCC: 3 | RNVC: 2

22 Nov 2011

5340-99-837-4598
Mounting Bracket

998374598
21-300068: RNCC: 3 | RNVC: 2

19 Sep 2012

5340-99-808-1624
Spring Tension Clip

998081624
FV54550: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-391-1961
Drive Camera

993911961
AL112348: RNCC: 3 | RNVC: 2
AL111219: RNCC: 6 | RNVC: 9

27 Jul 2005

5340-99-804-4701
Door Access

998044701
FV509885: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-837-1651
Lock Tab

998371651
CDT 010A: RNCC: 3 | RNVC: 2
BC 25884 ITEM 13: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-99-800-9933
Latch Bar

998009933
FV473497: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-569-7708
Velcro Strap

995697708
MC1158230: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-99-128-6153
Lock Bolt

991286153
6FS17521A: RNCC: 3 | RNVC: 2
26DL4142: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-668-0504
Mounting Plate

996680504
40004402: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-99-253-8338
Blanking Plate

992538338
RUB2796: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-310-3090
Line Supporting Strap

993103090
T30L: RNCC: 3 | RNVC: 2
192-5219: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-99-235-5275
Loop Clamp

992355275
10022235: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-99-666-1348
Exhaust Rocke Lever

996661348
4115R315: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-99-804-6984
Loop Clamp

998046984
11H1365: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-733-8908
Mounting Bracket

997338908
80225615: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-723-6952
Rubber Bumper

997236952
CK0341238: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-804-8448
Dust And Moisture Seal Boot

998048448
54575644: RNCC: 3 | RNVC: 2
601543: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-799-9293
Expansion Plug

997999293
ST43319: RNCC: 3 | RNVC: 2
PST43319: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-234-3692
Mounting Bracket

992343692
FV 966134: RNCC: 3 | RNVC: 2

28 Feb 1994

5340-99-641-8785
Po Securing Catches

996418785
3285: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-99-600-8106
Rod End Connector

996008106
6M4FS10875: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-734-5834
Webbing Strap

997345834
61494: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-99-733-7808
Mounting Bracket

997337808
H58327: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-4790
Line Supporting Strap

997334790
1062: RNCC: 3 | RNVC: 2
1062: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-403-9483
Dust And Moisture Seal Boot

994039483
TR3540: RNCC: 3 | RNVC: 2
21A425: RNCC: 5 | RNVC: 2
61BM40987: RNCC: 6 | RNVC: 9

3 Dec 1979

5340-99-483-2688
Plunger Casing

994832688
60863: RNCC: 3 | RNVC: 2

14 Dec 2009

5340-99-407-4174
Mounting Plate

994074174
3502520: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-99-618-3775
Line Supporting Strap

996183775
T50MR: RNCC: 3 | RNVC: 2
703PS310-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-801-9091
Butt Hinge

5340-99-963-3215
Detent Plunger

999633215
FL17247: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-0995
Loop Clamp

998260995
FV 578711: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-943-1710
Electrical-Mec Post

999431710
P191054: RNCC: 3 | RNVC: 2

24 Apr 1989

5340-99-960-8467
Detent Plunger

999608467
FL15678: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-961-2861
Blanking Plug

999612861
M29609874: RNCC: 3 | RNVC: 2

21 Mar 2002

5340-99-949-8999
Mending Plate

999498999
038421: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-99-828-8751
Resilient Mount

5340-99-610-7452

5340-99-436-8097

5340-99-827-0344

5340-99-825-9596
Electrical-Mec Post

5340-99-744-3770
Bail Handle

5340-99-439-8265

5340-99-806-2339

5340-99-805-9658
Electrical-Mec Post

5340-99-831-5106
Screw Thread Insert

5340-99-588-2105

5340-99-591-3513
Bearing

5340-99-427-1281
Engine Acce Bracket

5340-99-580-5613

5340-99-805-9780
Butt Hinge

5340-99-824-6659
Rubber Bumper

5340-99-588-0571
Access Cover

5340-99-600-0418

5340-99-520-1344

5340-99-661-7031
Bracket Mounting

5340-99-440-8619
Resilient Mount

5340-99-440-8621
Rim Clenching Clamp

5340-99-604-3590

5340-99-604-6546
Access Cover

5340-99-604-3942

5340-99-825-9650

5340-99-641-4743
Angle Bracket

5340-99-500-2765
Mounting Bracket

995002765
A5010220: RNCC: 3 | RNVC: 2
15268267: RNCC: 6 | RNVC: 9
FK9591U0006: RNCC: 6 | RNVC: 9

18 May 1995

5340-99-347-5063
Helical Compression Spring Seat

993475063
77801467: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-99-495-7044
Electrical-Mec Post

994957044
NKU296: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-500-9678
Mounting Bracket

995009678
FV 2236924: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-99-311-3300
Drum Assembly

993113300
DAC143C1: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-99-608-2507
Plain Solid Disk

996082507
N188072-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-400-9789
Rod End Clevis

994009789
803-3: RNCC: 3 | RNVC: 9
16E18553: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-361-2536
Door Hinge

993612536
0180014: RNCC: 3 | RNVC: 2

13 Jan 2001

5340-99-611-8080

5340-99-427-0799
Retaining Strap

994270799
BA38945: RNCC: 3 | RNVC: 2
36VV3760: RNCC: 6 | RNVC: 9
36VV3760: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-718-5034
Detent Plunger

997185034
EH9944: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-8741
Block Clamp

995628741
40003924: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-99-663-4524
Body

5340-99-961-2502
Gland Segment

5340-99-767-9678

5340-99-768-6579
Access Cover

5340-99-791-2358
Mending Plate

5340-99-466-4162
Support Hook

5340-99-619-2943

5340-99-999-8442

5340-99-581-7061
Access Cover

995817061
451-650-014: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-99-690-7869
Spring Holder

996907869
UBC25745/7: RNCC: 3 | RNVC: 2
BC25893 ITEM 10: RNCC: 5 | RNVC: 2
BC25893/10: RNCC: 5 | RNVC: 2

2 Nov 2011

5340-99-235-4816
Mounting Bracket

992354816
A-081102-005: RNCC: 3 | RNVC: 2
A081102-005: RNCC: 5 | RNVC: 2
TORNADO-5389: RNCC: 6 | RNVC: 9

15 Dec 2004

5340-99-384-4279
Section Block Clamp

993844279
D1257/42103: RNCC: 3 | RNVC: 2
D1257/42103: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-99-570-1170
Quick Release Plunger

995701170
WDS606-2025: RNCC: 3 | RNVC: 2
606-2025: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-99-741-4663
Mounting Plate

997414663
A-05400-04-3-T: RNCC: 3 | RNVC: 2
A-05400-04-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-133-9808
Angle Bracket

991339808
FV2289572: RNCC: 3 | RNVC: 2
07561-009: RNCC: 6 | RNVC: 9

12 Oct 2007

5340-99-648-2005
Mounting Bracket

996482005
3892-76027: RNCC: 3 | RNVC: 2
B3892-76027: RNCC: 5 | RNVC: 2
3892-76027: RNCC: 5 | RNVC: 9
B3892-76027: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-500-1419
Block Clamp

995001419
MX/00087/AL/120: RNCC: 3 | RNVC: 2
004470694: RNCC: 5 | RNVC: 2

18 Oct 1994

5340-99-634-8283
Spring Tension Clip

996348283
51-130: RNCC: 3 | RNVC: 2
50-130: RNCC: 5 | RNVC: 2
72206-256: RNCC: 5 | RNVC: 2
F306-51130: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-950-8785
Loop Clamp

999508785
BAS239-9B: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-946-2020
Comp Helical Spring

999462020
NO PRIMARY REF 99-946-2020: RNCC: 3 | RNVC: 2
5AA30878: RNCC: 5 | RNVC: 2
5AA30878: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-99-477-2625
Access Cover

994772625
NO PRIMARY REF 99-477-2625: RNCC: 3 | RNVC: 2
5UM-21721-E0: RNCC: 5 | RNVC: 2

16 May 2013

5340-99-146-6461
Angle Bracket

991466461
SS1061-212: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-138-9190
Catch Strike

991389190
TL800-7-1: RNCC: 3 | RNVC: 2
46302-842-00-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-215-5698
Rope Clamp

992155698
505115: RNCC: 3 | RNVC: 2
505115-1: RNCC: 5 | RNVC: 2
A3 505115: RNCC: 5 | RNVC: 2
A3 505115-1: RNCC: 5 | RNVC: 2
BW505115-1: RNCC: 5 | RNVC: 2
FK9522Z0778: RNCC: 6 | RNVC: 9

12 Oct 1995

5340-99-422-7403
Circlip

994227403
NO PRIMARY REF 99-422-7403: RNCC: 3 | RNVC: 2
11486P: RNCC: 5 | RNVC: 2
4FZ2019: RNCC: 6 | RNVC: 9

8 Oct 1979

5340-99-968-2460
Section Block Clamp

999682460
110045SHT268: RNCC: 3 | RNVC: 2
26VC-12314: RNCC: 6 | RNVC: 9

27 Jan 2002

5340-99-719-2093
Loop Clamp

997192093
S6130-80215-3: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-99-337-1131
Access Cover

993371131
3-OWE-205677: RNCC: 3 | RNVC: 2

4 Mar 1997

5340-99-957-8962
Access Cover

999578962
A-37-0336-03: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-99-653-6317
Mounting Bracket

996536317
689-3-11865: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-257-1243
Mounting Bracket

992571243
EN922347: RNCC: 3 | RNVC: 2
0111F-0097: RNCC: 6 | RNVC: 9

12 Dec 2000

5340-99-718-9485
Retaining Strap

997189485
614-2-03429: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-995-7848
Mounting Bracket

999957848
EA1-47-107: RNCC: 3 | RNVC: 2
26FZ-7745: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-547-5103
Spring Tension Clip

995475103
NO PRIMARY REF 99-547-5103: RNCC: 3 | RNVC: 2
PRC5681: RNCC: 5 | RNVC: 2
FJ9914L0043: RNCC: 6 | RNVC: 9

9 Jul 1999

5340-99-968-2073
Bracket

999682073
6X2H46085: RNCC: 3 | RNVC: 2
E046-481723: RNCC: 6 | RNVC: 9
LE441B3: RNCC: 6 | RNVC: 9

8 Nov 1996

5340-99-991-0152
Mounting Bracket

999910152
J21800041-001: RNCC: 3 | RNVC: 2

29 Jun 2000

5340-99-655-8449
Access Cover

996558449
WG1369-0020-003: RNCC: 3 | RNVC: 2
26LX1476: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-104-0918
Packing Plate

991040918
EA1205G028-109: RNCC: 3 | RNVC: 2

20 Jan 1999

5340-99-371-1786
Access Cover

993711786
001414191: RNCC: 3 | RNVC: 2
SST/A/141/0000/0004/000: RNCC: 5 | RNVC: 2

20 Mar 2009

5340-99-538-4102
Dust And Moisture Seal Protective Cap

995384102
SSN07/Y/287/078: RNCC: 3 | RNVC: 1
Y/287/078: RNCC: 5 | RNVC: 1
QCA/SSN07/Y/287/078: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-456-1901
Handwheel

994561901
1343/409.1: RNCC: 3 | RNVC: 2
A1252-301-70AGE1343-409-1: RNCC: 6 | RNVC: 9
88520-500-813: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-790-9129
Block Fairlead

997909129
P-916629-001: RNCC: 3 | RNVC: 2
P916629-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-647-4745
Handle Grip

996474745
P-810047-401: RNCC: 3 | RNVC: 2
P810047-401: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-377-5418
Hinge

993775418
FEP-1409-SC/078: RNCC: 3 | RNVC: 2
PA106/4/L: RNCC: 5 | RNVC: 2
040VW-004: RNCC: 6 | RNVC: 9

17 Mar 2004

5340-99-406-5137
Pin Circlip

994065137
0-902184: RNCC: 3 | RNVC: 2
902184: RNCC: 3 | RNVC: 2
61DB41025: RNCC: 6 | RNVC: 9

15 Aug 1980

5340-99-110-1585
Retaining Strap

991101585
AB/2/3/1096: RNCC: 3 | RNVC: 2
MM9157: RNCC: 5 | RNVC: 2

26 Jan 1993

5340-99-798-9415
Lock Spindle

997989415
SSN04/615/1/1030: RNCC: 3 | RNVC: 2
615/1/1030: RNCC: 5 | RNVC: 1
SSN04/615/1/1030 ISSUE 3: RNCC: 5 | RNVC: 2
H926-378606: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-301-6047
Double Angle Bracket

993016047
P-970332-004: RNCC: 3 | RNVC: 2
P970332-004: RNCC: 5 | RNVC: 2

15 Feb 1996

5340-99-912-9046
Loop Clamp

999129046
AGS2080-14: RNCC: 2 | RNVC: 2
DAS185-14: RNCC: 5 | RNVC: 1
85-25-10-4-2758: RNCC: 5 | RNVC: 2
FL307-10: RNCC: 5 | RNVC: 2
420-071593: RNCC: 6 | RNVC: 9
28E17634: RNCC: 6 | RNVC: 9
W20F0DEN548: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-658-8442
Electrical-Mec Post

5340-99-668-8572
Strapping Seal

996688572
EMBOSSED SEALLKH: RNCC: 3 | RNVC: 9

7 May 2013

5340-99-610-4606
Dust And Moisture Seal Protective Cover

996104606
V100818: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-600-2810
Electrical-Mec Post

996002810
Y13SS5686: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-6927
Angle Bracket

992126927
FV 2249002: RNCC: 3 | RNVC: 2
GLY 4472: RNCC: 5 | RNVC: 2

9 Jun 2004

5340-99-713-7176
Mounting Plate

997137176
100A102806: RNCC: 3 | RNVC: 2
100A102806: RNCC: 5 | RNVC: 2
A102806: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-209-2663
Bushing

992092663
FV 841120: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-628-0356
Electrical-Mec Post

996280356
3042A5290: RNCC: 3 | RNVC: 2
XS4545: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-227-3339
Loop Clamp

992273339
UG0546071: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-99-257-7905
Retaining Strap

992577905
FV 474464: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-145-2644
Swivel Castor

991452644
461AN: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-010-4607
Clamping Catch

990104607
MXH1937: RNCC: 3 | RNVC: 2
MXH1550: RNCC: 6 | RNVC: 9

1 Aug 1994

5340-99-101-5213
Dust And Moisture Seal Protective Cap

991015213
RU6489A: RNCC: 3 | RNVC: 2
RU6489A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-396-5903
Cushioning Pad

993965903
NKT109: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-99-213-3917
Angle Bracket

992133917
POG097342: RNCC: 3 | RNVC: 2

2 Dec 2009

5340-99-468-4073
Angle Bracket

994684073
103E2964: RNCC: 3 | RNVC: 2
26TA19767: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-660-7150
Mounting Plate

996607150
23000922: RNCC: 3 | RNVC: 2

1 Oct 1993

5340-99-382-4755
Block Clamp

993824755
EA126A20: RNCC: 3 | RNVC: 2

4 Apr 2009

5340-99-503-3973
Loop Clamp

995033973
7624: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-99-301-9794
Mounting Bracket

993019794
NO PRIMARY REF 99-301-9794: RNCC: 3 | RNVC: 2
09-465-22: RNCC: 5 | RNVC: 2

16 Feb 2007

5340-99-534-6399
Tubular Fairlead

995346399
CF21567: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-402-3142
Dust And Moisture Seal Protective Cap

994023142
DTLRDOG19: RNCC: 3 | RNVC: 2

1 Nov 2012

5340-99-687-2807
Mounting Plate

996872807
FV2300501: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-99-151-4896
Electronic Equipment Hardware Kit

991514896
FPK: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-99-405-0356
Loop Clamp

994050356
6H16: RNCC: 3 | RNVC: 2
0821AWD6H16: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-700-3779
Screw Thread Insert

997003779
UB177195: RNCC: 3 | RNVC: 2
B177195: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-463-5875
Mounting Bracket

994635875
FV 2202007: RNCC: 3 | RNVC: 2

9 Jan 1995

5340-99-730-9591
Butt Hinge Leaf

997309591
FV 2029345: RNCC: 3 | RNVC: 2

24 Apr 1987

5340-99-733-6286
Double Angl Bracket

997336286
84750488: RNCC: 3 | RNVC: 2
A0084750488: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-738-5584
Section Block Clamp

997385584
FV2268030: RNCC: 3 | RNVC: 2

9 May 2007

5340-99-600-5665
Rod End Clevis

5340-99-605-2052

5340-99-600-1706

5340-99-612-5609
Hinge Bracket

5340-99-613-5345

5340-99-826-5864

5340-99-830-5199
Mounting Bracket

5340-99-631-0007

5340-99-612-9338
Loop Clamp

5340-99-653-9971

5340-99-913-0725

5340-99-612-5031
Angle Bracket

5340-99-400-5099

5340-99-641-6620

5340-99-635-6524

5340-99-791-6458
Resilient Mount Plate

997916458
200890605: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-793-9052
Shroud Assembly

997939052
ARD002: RNCC: 3 | RNVC: 2
FL990II0263: RNCC: 6 | RNVC: 9

5 May 1999

5340-99-791-6042
Angle Bracket

997916042
FV2068797: RNCC: 3 | RNVC: 2
FV2068797: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-792-8189
Strap Assembly

997928189
6930356: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-773-4407
Control Rod

997734407
CH0859198: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-819-4558
Loop Clamp

998194558
FV663231: RNCC: 3 | RNVC: 2
FV663231: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-813-2078
Mounting Plate

998132078
FV2306707: RNCC: 3 | RNVC: 2
BAE TELFORD RJ690: RNCC: 6 | RNVC: 9

29 Apr 2010

5340-99-818-1633
Nut And Bolt Locking Plate

998181633
C23158: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-812-9947
Mounting Bracket

998129947
201567829: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-99-813-5367
Frame Suppo Bracket

998135367
FV626419: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-794-4928
Escutcheon Plate

997944928
1507A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-789-9925
Engine Accessory Bracket

997899925
FV2026695: RNCC: 3 | RNVC: 2

17 Apr 1985

5340-99-614-5412
Plate Link

996145412
PE20244: RNCC: 3 | RNVC: 2

16 Aug 2007

5340-99-406-2002
Retaining Strap

994062002
AS487-8: RNCC: 2 | RNVC: 2
28E14143: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-803-3855
Retaining Clip

998033855
N56095: RNCC: 3 | RNVC: 2
L5481-3: RNCC: 5 | RNVC: 2
5CX5337: RNCC: 6 | RNVC: 9
LV6MT3RTXN56095: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-795-9254
Rod End Connector

997959254
57847: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-658-5685

5340-99-702-1521

5340-99-658-9785

5340-99-658-1027
Webbing Strap

5340-99-657-7630
Loop Clamp

5340-99-657-0643
Electrical-Mec Post

5340-99-658-4313
Double Angl Bracket

5340-99-657-4678

5340-99-607-2014

5340-99-670-3872
Resilient Mou Plate

5340-99-198-7634

5340-99-662-7745
Roller Fairlead

5340-99-662-6617
Mounting Plate

5340-99-971-7592
Extension Drawer Slide

999717592
5012CN9-75: RNCC: 3 | RNVC: 2
B35743: RNCC: 5 | RNVC: 2
45228-901-0: RNCC: 5 | RNVC: 2
45228-901-00-0: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-131-4335
Pipe Clip Assembly

991314335
41214-063-0: RNCC: 3 | RNVC: 2
WB/2571-63: RNCC: 5 | RNVC: 2
26VC24304: RNCC: 6 | RNVC: 9

26 Jun 2002

5340-99-813-0644
Butt Hinge

998130644
NO PRIMARY REF 99-813-0644: RNCC: 3 | RNVC: 2
AG2-001: RNCC: 5 | RNVC: 2

13 Oct 2009

5340-99-152-9515
Webbing Strap

991529515
WG1588-0010-045: RNCC: 3 | RNVC: 2

18 Feb 2012

5340-99-254-2638
Mounting Bracket

992542638
110027-17231: RNCC: 3 | RNVC: 2
26VC-11549: RNCC: 6 | RNVC: 9

27 Aug 2004

5340-99-360-4902
Threaded Rod End

993604902
800-01-01-1042: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-99-313-4324
Rack

993134324
NO PRIMARY REF 99-313-4324: RNCC: 3 | RNVC: 2
5652268: RNCC: 5 | RNVC: 2
C575-LWM042205: RNCC: 6 | RNVC: 9

21 Jun 2001

5340-99-183-3015
Block Fairlead

991833015
EC7170B033-101: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-99-616-8197
Mounting Bracket

996168197
27300-204: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-99-750-3003
Cushioning Pad

997503003
HH8047-001: RNCC: 3 | RNVC: 2
99PA01-480: RNCC: 6 | RNVC: 9

8 Mar 1999

5340-99-553-5507
Access Cover

995535507
AA-2865-403: RNCC: 3 | RNVC: 2
CV187591D: RNCC: 5 | RNVC: 2

20 Jan 2012

5340-99-261-5640
Mounting Bracket

992615640
205-055842 ISSUE 2: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-99-816-3803
End Rod

998163803
NO PRIMARY REF 99-816-3803: RNCC: 3 | RNVC: 2
5645564: RNCC: 5 | RNVC: 2
C575-LWM041524: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-647-3359
Electrical-Mec Post

996473359
84-57627: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-3003
Plate Clamp

998083003
6308-317: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-99-597-0009
Pitot Handle

995970009
54-19-00171-00: RNCC: 3 | RNVC: 2

8 Apr 2009

5340-99-864-5365
Mechanical Stop

998645365
24237-193: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-99-661-7634
Mounting Bracket

996617634
PT2568-3-646237: RNCC: 3 | RNVC: 2
660-01-646237-000-18: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-745-2753
Seal And Lock Ring

997452753
M8 NYLTITE SEALS: RNCC: 3 | RNVC: 1
M 4089 187 AS: RNCC: 5 | RNVC: 2
L-29-M8: RNCC: 5 | RNVC: 2
L-28-M8: RNCC: 6 | RNVC: 9
M8: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-320-1252
Lever Pin

993201252
B-020366: RNCC: 3 | RNVC: 2
B-021571/2: RNCC: 5 | RNVC: 2
B-022539 ITEM 2: RNCC: 5 | RNVC: 2
B-022539/2: RNCC: 5 | RNVC: 2
B-021571 ITEM 2: RNCC: 5 | RNVC: 2

2 Oct 2008

5340-99-749-8192
Dust And Moisture Seal Protective Cap

997498192
01T-C-10376: RNCC: 3 | RNVC: 2
01TC10376: RNCC: 5 | RNVC: 2
01T-C-10376: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-798-9418
Lock Bolt

997989418
SSN04/615/1/1033: RNCC: 3 | RNVC: 2
615/1/1033: RNCC: 5 | RNVC: 1
SSN04/615/1/1033 ISSUE 3: RNCC: 5 | RNVC: 2
H926-378609: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-033-3082
Loop Clamp

990333082
RSGU1-15/15-5: RNCC: 3 | RNVC: 2
WS9002-4004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-850-3648
Line Supporting Strap

998503648
T50S: RNCC: 3 | RNVC: 1
T50S(GREEN): RNCC: 6 | RNVC: 9

18 Sep 1991

5340-99-794-5003
Angle Bracket

997945003
5046A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-930-3248
Angle Bracket

999303248
FV 2266039: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-99-850-3929
Mounting Plate

998503929
210-6475: RNCC: 3 | RNVC: 2
CV161371D: RNCC: 5 | RNVC: 2

19 Oct 2010

5340-99-153-6689
Mounting Bracket

991536689
24628: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-99-631-8774
Electrical-Mec Post

5340-99-656-2124
Mounting Plate

996562124
NCF183: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-925-1049
Bracket

999251049
M5755277320000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-925-0426
Mounting Plate

999250426
AE000582: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-99-851-0585
Ring

998510585
PC3456: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-99-075-6464
Loop Clamp

990756464
RK24979: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-99-105-4022
Mounting Plate

991054022
SDB180557: RNCC: 3 | RNVC: 2
Z2ZB15000: RNCC: 6 | RNVC: 9
10APZB15000: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-238-1889
Toolbox Assembly

992381889
16326: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-99-124-0526
Railway Seal

991240526
GA14716: RNCC: 3 | RNVC: 2
1SPR0VSPEC1273D: RNCC: 5 | RNVC: 1
G1GA14716: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-225-5598
Retaining Strap

992255598
FV 2167651: RNCC: 3 | RNVC: 2
LP6UH4972: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-99-276-1668
Block Clamp

992761668
110050-2537: RNCC: 3 | RNVC: 2
26VC17130: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-370-8324
Access Cover

993708324
P391098: RNCC: 3 | RNVC: 2
FS990TO0001: RNCC: 6 | RNVC: 9

29 Apr 1999

5340-99-665-9912
Bracket

996659912
AZ53017685: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-99-170-5392
Mounting Plate

991705392
CM46368: RNCC: 3 | RNVC: 2

13 Feb 2007

5340-99-974-0016
Access Cover