What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 92 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 92 of 368

5340-99-182-3308
Access Cover

991823308
FV2283719: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-99-956-9266

5340-99-607-0508
Groo Clamp Coupling

5340-99-913-2403

5340-99-016-8460
Metal Runner

5340-99-956-0385

5340-99-968-0582

5340-99-942-9581

5340-99-016-0370
Rim Lock Set

5340-99-441-0702
Retaining Strap

994410702
EU22848: RNCC: 3 | RNVC: 2
36SY2664: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-153-2047
Bracket

991532047
M5755408820000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-536-1855
Headless Grooved Rod

995361855
RPH3913: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-536-2767
Loop Clamp

995362767
6NM63801: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-653-9741
Angle Bracket

996539741
842110: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-199-3769
Retaining Strap

991993769
EAP5760: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-102-6092
Electrical-Mec Post

991026092
VU3366: RNCC: 3 | RNVC: 2
36AD1970: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-234-3352
Retaining Band

992343352
MXK1545: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-99-343-1493
Cover

993431493
E42973: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-99-420-9660
Retaining Strap

994209660
BA37575: RNCC: 3 | RNVC: 2
36VV9494: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-254-7759
Double Angle Bracket

992547759
304-4778: RNCC: 3 | RNVC: 2
50044029: RNCC: 5 | RNVC: 2

9 May 2011

5340-99-819-5434
Mounting Plate

998195434
FV713407: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-820-3784
Mechanic Equipment Hardware Kit

998203784
ULA500050: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-99-952-4255
Retaining Strap

999524255
752: RNCC: 3 | RNVC: 1
PB9479: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-0407
Retaining Band

998150407
FV314255: RNCC: 3 | RNVC: 2
LV9AHYFV314255: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-729-0689
Mounting Bracket

997290689
20861: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-99-814-8539
Dust And Moisture Seal Boot

998148539
FV209885: RNCC: 3 | RNVC: 2
EWG 13148: RNCC: 5 | RNVC: 2
SM2759: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-143-5965

5340-99-137-7498
Nonmetallic Bushing

5340-99-169-0870
Access Cover

5340-99-745-3907

5340-99-300-2194
Mounting Bracket

5340-99-114-9366

5340-99-138-3004

5340-99-744-0165
Webbing Strap

5340-99-709-0522
Mounting Bracket

5340-99-718-0805
Dust And Moisture Seal Protective Plug

997180805
RU41276: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-3659
Handle

995623659
3058195: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-99-628-9920
Retaining Strap

996289920
FV811588: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-955-5156
Electrical-Mec Post

999555156
RRA825929: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-610-4462
Side Strip

996104462
6930484: RNCC: 3 | RNVC: 2
FF9530C0054: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-441-9227
Gun Rack Assembly

994419227
FV 2080897: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-425-0096
Multiple Angle Bracket

994250096
110084-4666: RNCC: 3 | RNVC: 2
XP98PI01438: RNCC: 6 | RNVC: 9

15 Dec 1998

5340-99-138-4438
Screw Thread Insert

991384438
28N16646: RNCC: 3 | RNVC: 2
61R50008: RNCC: 6 | RNVC: 9

7 Nov 1978

5340-99-457-6819
Butt Hinge Leaf

994576819
63BE2981: RNCC: 3 | RNVC: 2
E2981: RNCC: 5 | RNVC: 1
26TA19740: RNCC: 6 | RNVC: 9

7 Nov 1978

5340-99-208-9298
Rod End Clevis

992089298
MEXE38537: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-700-0135
Screw Thread Insert

997000135
UBS26M9: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-499-8590
Dust And Moisture Seal Protective Cover

994998590
JRB5877: RNCC: 3 | RNVC: 2

17 Jul 1991

5340-99-168-8821
Access Cover

991688821
FV 2040165: RNCC: 3 | RNVC: 2
FV 2040165: RNCC: 5 | RNVC: 2

6 May 1994

5340-99-406-7419
Mushroom Plate

994067419
C201978: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-99-372-9189
Blanking Cap

993729189
SP3319-0044-SC: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-99-309-4411
Clamp

993094411
821/00280: RNCC: 3 | RNVC: 2
11.3 GER: RNCC: 6 | RNVC: 9

31 Mar 2003

5340-99-192-0809
Clip

991920809
VGS380-641: RNCC: 3 | RNVC: 2
26VC-13821: RNCC: 6 | RNVC: 9

20 Mar 2002

5340-99-524-9960
Helical Compression Spring Retainer

995249960
YJ.31147.A: RNCC: 3 | RNVC: 2
678-231961: RNCC: 6 | RNVC: 9
678-524-9960: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-716-0455
Angle Bracket

997160455
S6130-63062-1: RNCC: 3 | RNVC: 2
S6130-63062: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-322-5730
Quick Release Plunger

993225730
GN.36401: RNCC: 3 | RNVC: 2
GN 822: RNCC: 5 | RNVC: 1
8XRMO: RNCC: 5 | RNVC: 2
PC-A-21-20-00-06B-941A-A ITEM008: RNCC: 5 | RNVC: 2
GN 822-4-B-ST: RNCC: 5 | RNVC: 2
090DE-001: RNCC: 6 | RNVC: 9
114EH-003: RNCC: 6 | RNVC: 9

27 Feb 2009

5340-99-133-6700
Webbing Strap

991336700
MIL/XA1085: RNCC: 3 | RNVC: 2
2105/2610: RNCC: 5 | RNVC: 2
SPCISR10/2/5/5/1: RNCC: 6 | RNVC: 9
060N4-005: RNCC: 6 | RNVC: 9

28 Feb 2006

5340-99-532-3095
Spring Box Bracket

995323095
SSN07M510-60-1-22: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-776-6075
Electrical-Mec Post

997766075
R247/2 ITEM 4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-595-0971
Bow Handle

995950971
NO PRIMARY REF 99-595-0971: RNCC: 3 | RNVC: 2
P63-490-130: RNCC: 5 | RNVC: 2
456-545: RNCC: 5 | RNVC: 2

21 Feb 2013

5340-99-723-8479
Helical Compression Spring Seat

997238479
WE7802/4: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-99-414-7247
Nut And Bolt Retainer

994147247
BA41353-1: RNCC: 3 | RNVC: 2
36VV2313: RNCC: 6 | RNVC: 9
36VV2313: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-378-4087
Electrode Assembly

993784087
2300008/1: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-99-848-9491
Bumper

998489491
FV138510: RNCC: 3 | RNVC: 2
9BTRFV138510: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-722-9340
Demister Nozzle

997229340
259/78900: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-99-878-8784
Double Angle Bracket

998788784
POG122296: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-99-862-8768
Loop Clamp

998628768
110045SHT3: RNCC: 3 | RNVC: 2

14 Jul 1995

5340-99-877-7368
Lever Strut

998777368
00-1097-1111: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-99-999-3086

5340-99-999-4900

5340-99-198-8100
Mounting Bracket

991988100
EA2820B104-101: RNCC: 3 | RNVC: 2
EA2820B104: RNCC: 5 | RNVC: 1

16 Sep 1993

5340-99-179-8978
Block Fairlead

991798978
121E-63-791-000: RNCC: 3 | RNVC: 2

3 Oct 1992

5340-99-510-0795
Mounting Plate

995100795
EA5306P524-105: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-99-382-7345
Mounting Bracket

993827345
DCSL/041: RNCC: 3 | RNVC: 2
DCSL/041: RNCC: 3 | RNVC: 9

28 Sep 2011

5340-99-192-4212
Strap Hinge Leaf

991924212
NB-15-C-270: RNCC: 3 | RNVC: 2
B150270: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-99-888-9175
T Bracket

998889175
WG1311-0026-001: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-99-926-3713
Handle Fitting Shoe

999263713
2071-12219-20-3: RNCC: 3 | RNVC: 2
FF9703M0006: RNCC: 6 | RNVC: 9

6 Jan 1998

5340-99-397-4723
Mounting Bracket

993974723
P-917292-017: RNCC: 3 | RNVC: 2
P917292-017: RNCC: 5 | RNVC: 2
TORNADO-2345: RNCC: 6 | RNVC: 9

27 Jun 2013

5340-99-741-6258
Mounting Bracket

997416258
OE-C-14236: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-99-250-9107
Access Cover

992509107
54155-227-9: RNCC: 3 | RNVC: 2
54155-227-00-9: RNCC: 5 | RNVC: 2

20 Aug 1988

5340-99-734-2839
Insert

997342839
CP3358-8-18: RNCC: 3 | RNVC: 2
989007946: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-471-3829
Access Cover

994713829
812968-00: RNCC: 3 | RNVC: 2
0624V-0007: RNCC: 6 | RNVC: 9

17 May 2006

5340-99-282-3973
Turnbuckle Body

992823973
SST/Y/270/00/S001/143 SHEET 001-: RNCC: 3 | RNVC: 1
001293530: RNCC: 5 | RNVC: 1
001293530 PART 143: RNCC: 5 | RNVC: 1
001293530/143: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/143: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000/143: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000 PART 143: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-811-1914
Removal Key

998111914
SST/M/510/60/0008/202: RNCC: 3 | RNVC: 2
001304814: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-99-775-2945
Nut And Bolt Locking Plate

997752945
SJC1760: RNCC: 3 | RNVC: 1
SJC1760/1.925: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-547-2742
Rod End Clevis

995472742
85-25-52-2-14035: RNCC: 3 | RNVC: 2

8 Nov 1984

5340-99-548-8837
Indicator Sleeve

995488837
SSN07M141-86-2-141: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-653-4202
Captive Fastener

996534202
RL3391-11-1: RNCC: 1 | RNVC: 2
PFC2-440-40: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-313-8037
Webbing Strap

993138037
WS50RH: RNCC: 3 | RNVC: 2
69302643 REFERENCE 2: RNCC: 5 | RNVC: 2
69302643/2: RNCC: 5 | RNVC: 2

21 Aug 2003

5340-99-437-8797
Retaining Clip

994378797
B1 SC: RNCC: 3 | RNVC: 2
953-015-015: RNCC: 5 | RNVC: 2
1112868: RNCC: 5 | RNVC: 2

14 May 1996

5340-99-527-4809
Corrosion Electrode

995274809
2300008/1 REV4: RNCC: 3 | RNVC: 1
1514-1CSPPT127: RNCC: 5 | RNVC: 1
1514-1CPT127: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-786-5632
Dust And Moisture Seal Protective Cap-Plug

997865632
172-8: RNCC: 3 | RNVC: 1
COA-191: RNCC: 5 | RNVC: 2
172-8 RED: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-783-1369
End Cap

997831369
NO PRIMARY REF 99-783-1369: RNCC: 3 | RNVC: 2
1R479: RNCC: 5 | RNVC: 2
TT7777174: RNCC: 6 | RNVC: 9

13 Aug 2002

5340-99-696-3138
Double Angle Bracket

996963138
FP01/10066/A: RNCC: 3 | RNVC: 2
Y 109 188 05: RNCC: 5 | RNVC: 2
030LE-007: RNCC: 6 | RNVC: 9

13 Feb 2003

5340-99-257-2875
Double Angle Bracket

992572875
FV2048796: RNCC: 3 | RNVC: 2
FV2048796: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-168-0720
Mechanic Equipment Hardware Kit

991680720
701191: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-99-131-6516
Pad

991316516
BAC143C829: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-99-250-2681
Angle Bracket

992502681
1841IKDTL3704: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-99-667-0544
Access Cover

996670544
91190: RNCC: 3 | RNVC: 2

13 May 2008

5340-99-182-2637
Dust And Moisture Seal Protective Cap

991822637
027-07917: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-99-662-6889
Loop Clamp

996626889
FV 2193517: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-99-701-5556
Bow Handle

997015556
FV 2157365: RNCC: 3 | RNVC: 2

7 May 1993

5340-99-256-8018
Helical Compression Spring Seat

992568018
ND18452: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-99-223-3659
Spring Tension Clip

992233659
334A4795P: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-216-3965
Mounting Bracket

992163965
555262800: RNCC: 3 | RNVC: 2
CV130625: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-99-403-9707
Plugs

994039707
ANK4695: RNCC: 3 | RNVC: 2
61BM50170: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-427-5272
Retaining Strap

994275272
F196873: RNCC: 3 | RNVC: 2
F196873: RNCC: 5 | RNVC: 9
26FX4786: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-141-4006
Retaining Ring

991414006
329: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-152-7526
Retaining Strap

991527526
66874: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-99-668-1703
Access Cover

996681703
AK20429H001: RNCC: 3 | RNVC: 2
CV174291: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-99-387-2513
Mechanic Equipment Hardware Kit

993872513
KP00300: RNCC: 3 | RNVC: 2

3 Jan 2013

5340-99-583-0969
Dashpot

995830969
331/59652: RNCC: 3 | RNVC: 2
085235-1000N: RNCC: 5 | RNVC: 2

9 Jun 2010

5340-99-271-4768
Manual Control Handle

992714768
009/010: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-99-551-5463
Hinged Hasp

995515463
59862: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-99-260-8550
Gimbal Plate

992608550
MZK4104: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-99-116-3058
Casting Machined

991163058
10024698-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-100-6266

5340-99-101-3236

5340-99-083-4227
Fork

5340-99-101-0495

5340-99-894-0530
Locking Plate

998940530
9979: RNCC: 3 | RNVC: 2

12 Jul 1991

5340-99-867-1384
Resilient Mount Plate

998671384
FV472246: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-872-2183
Bracket Assy

998722183
M5745977600000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-866-9092
Angle Bracket

998669092
FV472346: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-99-930-7403
Retaining Strap

999307403
ERR4824: RNCC: 3 | RNVC: 2
FJ9615L0190: RNCC: 6 | RNVC: 9
(241)AE095ERR4824: RNCC: 8 | RNVC: 2
ERR4824: RNCC: 8 | RNVC: 2

14 May 1996

5340-99-902-5156
Mounting Bracket

999025156
FV2320389: RNCC: 3 | RNVC: 2

2 Jul 2012

5340-99-880-0497
Guard

998800497
UTP001326: RNCC: 3 | RNVC: 2
004018: RNCC: 5 | RNVC: 2

20 Jan 2012

5340-99-881-3552
Loop Clamp

998813552
FV533538: RNCC: 3 | RNVC: 2
LV6MT4FV533538: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-880-0549
Bracket

998800549
M5745846700000: RNCC: 3 | RNVC: 2

16 Feb 2013

5340-99-880-6983
Mounting Bracket

998806983
54299: RNCC: 3 | RNVC: 2
54299: RNCC: 6 | RNVC: 9

16 Jan 2008

5340-99-767-0290
Threaded Bush

997670290
52PBH00A0004: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-700-3652
Loop Clamp

997003652
B57550: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-815-2220
Webbing Strap

998152220
3337024: RNCC: 3 | RNVC: 2
010J7-014: RNCC: 6 | RNVC: 9

14 Mar 2001

5340-99-126-4559
Bellows

991264559
SR0040/3: RNCC: 3 | RNVC: 2
106-94/2: RNCC: 6 | RNVC: 9
PLATE 247A ITEM 69: RNCC: 6 | RNVC: 9

8 Apr 1997

5340-99-722-9678
Mounting Bracket

997229678
18539MS: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-813-0697
Clamping Catch

998130697
02471-193: RNCC: 3 | RNVC: 2

28 Oct 2009

5340-99-820-6245
Loop Clamp

998206245
FV668758: RNCC: 3 | RNVC: 2
CC1061: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-663-7018
Multiple Angle Bracket

996637018
MZK 3885: RNCC: 3 | RNVC: 2
FJ970J10002: RNCC: 6 | RNVC: 9

29 May 1997

5340-99-244-7180
Retaining Strap

992447180
RK.23680: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-99-813-3066
Retaining Strap

998133066
4184 WITH 4183: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-99-533-1247
Resilient Mount

995331247
16791395: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-8147
Battery Strap

997338147
84760065: RNCC: 3 | RNVC: 2
84760065: RNCC: 5 | RNVC: 2
84760064: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-733-3660
Protection Bellows

997333660
CK0340972: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-739-0647
Mounting Rubber

997390647
WCS500020: RNCC: 3 | RNVC: 2
ESR2119: RNCC: 5 | RNVC: 9
(241)AE095ESR2119: RNCC: 8 | RNVC: 2
ESR2119: RNCC: 8 | RNVC: 2

2 Oct 1995

5340-99-739-0684
Electrical-Mec Post

997390684
1363: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-1481
Baffle

997331481
TZ.3453504: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-3162
Mounting Bracket

997333162
JN0370005: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-731-8576
Latch Assembly

997318576
94134: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-99-417-8264
Access Cover

994178264
HH0/MV4296: RNCC: 3 | RNVC: 2

17 Mar 1995

5340-99-738-7413
Slide Support

997387413
DPA1748: RNCC: 3 | RNVC: 2

30 Jun 2004

5340-99-732-1618
Access Cover

997321618
0241 17267: RNCC: 3 | RNVC: 2
B15131: RNCC: 5 | RNVC: 2
2761: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-731-2246
Mounting Bracket

997312246
42213209: RNCC: 3 | RNVC: 2

12 Dec 2004

5340-99-139-2640
Retaining Strap

5340-99-149-8376

5340-99-143-6236

5340-99-192-8405

5340-99-198-7978
Loop Clamp

991987978
CX260214: RNCC: 3 | RNVC: 2
37A5427: RNCC: 6 | RNVC: 9
37A5427: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-981-0508
Spacing Threaded Standoff

999810508
80031946: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-99-987-5204
Loop Clamp

999875204
FV 2081437: RNCC: 3 | RNVC: 2
FV 2081437: RNCC: 5 | RNVC: 2
FV2081437: RNCC: 6 | RNVC: 9

23 Jan 1995

5340-99-987-5814
Mounting Bracket

999875814
502968: RNCC: 3 | RNVC: 2

21 May 2007

5340-99-317-0975
Angle Bracket

993170975
QB12832: RNCC: 3 | RNVC: 2

12 Nov 1992

5340-99-332-1262
Sliding Leg

993321262
52997: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-99-983-1220
Mounting Bracket

999831220
60050-773: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-99-988-3720
Sleeve

999883720
503351: RNCC: 3 | RNVC: 2
503351: RNCC: 5 | RNVC: 2

24 Jan 1991

5340-99-987-6142
Seal Retaining Plate

999876142
ACO48066: RNCC: 3 | RNVC: 2

19 Jun 2012

5340-99-981-9464
Dust And Moisture Seal Protective Cap

999819464
26265-V02: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-99-987-4736
Angle Bracket

999874736
110084-4670: RNCC: 3 | RNVC: 2
XP98PI01440: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-99-656-4109
Mounting Bracket

996564109
CFT40563: RNCC: 3 | RNVC: 2

25 May 1999

5340-99-374-7299
Swivel Caster

993747299
TS5200PT15L: RNCC: 3 | RNVC: 2
TS5200PT15L: RNCC: 5 | RNVC: 2

27 Oct 1995

5340-99-636-2898
Loop Clamp

996362898
FV553914: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-953-4251
Spring Tension Clip

999534251
1235: RNCC: 3 | RNVC: 2
28E10073: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-549-7554
Access Cover

995497554
FV 2155327: RNCC: 3 | RNVC: 2

3 Jul 1995

5340-99-961-9846
Hinged Hasp

999619846
SA1D1081C1TEM1T03: RNCC: 3 | RNVC: 2
C1BD0228: RNCC: 6 | RNVC: 9
226343: RNCC: 6 | RNVC: 9

4 Apr 1991

5340-99-809-9106
Rubber Bumper

998099106
DMK5077: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-810-1147
Rod End Clevis

998101147
FV697752: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-549-6657
Cover Plate

995496657
POG047199: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-99-256-0123
Access Cover

992560123
4581-845: RNCC: 3 | RNVC: 2

29 Jun 1989

5340-99-810-3214
Rod End Clevis

998103214
TGB3289: RNCC: 3 | RNVC: 2
LV1DBTGB3289: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-334-0248
Catch Strike

993340248
735400820: RNCC: 3 | RNVC: 2

15 Feb 2013

5340-99-138-2059
Buckle

991382059
N543: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-471-3198
Eccentric Lock

994713198
306629: RNCC: 3 | RNVC: 2
55 9931: RNCC: 5 | RNVC: 2

16 Apr 2004

5340-99-461-5139
General Purpose Resilient Mount

994615139
1045715: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-99-431-8958
Retaining Strap

994318958
V679E: RNCC: 3 | RNVC: 2
X3XCVEV679: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-809-9201
Retaining Strap

998099201
FV463128: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-8587
Loop Clamp

997338587
84710146: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-626-0345
Retaining Strap

996260345
819554: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-521-5566
Bracket

995215566
42209109: RNCC: 3 | RNVC: 2

26 Aug 1994

5340-99-717-7770

5340-99-714-1267
Rubber Bumper

5340-99-714-8981

5340-99-713-7773

5340-99-727-1386
Bracket Assy

997271386
M5755408800000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-610-9110
Loop Clamp

996109110
137466C404: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-626-5077
Loop Clamp

996265077
BKB898: RNCC: 3 | RNVC: 2
BKB898: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-726-9175
Line Supporting Strap

997269175
B60951: RNCC: 1 | RNVC: 2
2Y234M: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-427-1359
Dust And Moisture Seal Protective Cap

994271359
GP7971: RNCC: 3 | RNVC: 2
36VV22589: RNCC: 6 | RNVC: 9
36VV22589: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-427-2295
Retaining Strap

994272295
BA98838: RNCC: 3 | RNVC: 2
BA98838: RNCC: 5 | RNVC: 9
36VV13461: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-717-3027

5340-99-745-0223
Rim Latch Set

5340-99-719-9834

5340-99-717-7687

5340-99-665-0576
Mounting Bracket

996650576
80302502: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-99-529-7414
Rim Lock Key

995297414
FK4: RNCC: 3 | RNVC: 1
D6145401TEM9: RNCC: 5 | RNVC: 2
FK4WJ: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-930-3079
Helical Compression Spring Retainer

999303079
3A83-T0-136: RNCC: 3 | RNVC: 2
P15KGS400007200 ITEM 12: RNCC: 5 | RNVC: 2
P15KGS400007200/12: RNCC: 5 | RNVC: 2

24 Feb 1999

5340-99-433-4024
Handwheel

994334024
WD3725-002: RNCC: 3 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9

23 Mar 2000

5340-99-314-5886
Mounting Plate

993145886
RR001057-A3: RNCC: 3 | RNVC: 2
RR001057: RNCC: 5 | RNVC: 2

8 Nov 1994

5340-99-821-0215
Spring Tension Clip

998210215
EF819-001: RNCC: 3 | RNVC: 2

3 Nov 1994

5340-99-221-1941
Rim Clenching Clamp

992211941
A3854-00463: RNCC: 3 | RNVC: 2
3854-00463: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-215-9056
Corrosion Preventive Anode

992159056
AM 850-50A-20M: RNCC: 3 | RNVC: 2
AM 850: RNCC: 5 | RNVC: 1

14 Aug 1997

5340-99-737-8565
Access Cover

997378565
99/822503: RNCC: 3 | RNVC: 2

23 Nov 2009

5340-99-265-1448
Thrust Cover

992651448
NO PRIMARY REF 99-265-1448: RNCC: 3 | RNVC: 2
2NL-23517-00: RNCC: 5 | RNVC: 2

27 Apr 2009

5340-99-871-5908
Loop Clamp

998715908
MDS2607A40: RNCC: 3 | RNVC: 2
EF817A40: RNCC: 5 | RNVC: 1
010LE-007: RNCC: 6 | RNVC: 9

20 Mar 2001

5340-99-878-8560
Mounting Plate

998788560
WG1574-0094-041: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-99-241-6958
Access Cover

992416958
EA6320G506-103: RNCC: 3 | RNVC: 2

4 Sep 2008

5340-99-163-6245
Mounting Plate

991636245
WG1488-0156-101: RNCC: 3 | RNVC: 2

22 Dec 2012

5340-99-584-1959
Angle Bracket

995841959
1839-IK-DTL-01977: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-99-145-8547
Rod End Connector

991458547
WD01-47-90060: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-749-9205
Pawl Fastener

997499205
0748/001: RNCC: 3 | RNVC: 2
10-70-503: RNCC: 5 | RNVC: 2

14 May 2009

5340-99-626-8608
Retaining Strap

996268608
819314: RNCC: 3 | RNVC: 2
BA819314: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-617-0900
Dust And Moisture Seal Protective Cover

996170900
HLN1653: RNCC: 3 | RNVC: 2
HLN1653: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-838-5026
Loop Clamp

998385026
FV964070: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-99-904-3965
Dust And Moisture Seal Protective Cover

999043965
JRB5922: RNCC: 3 | RNVC: 2

17 Jul 1991

5340-99-826-2458
Loop Clamp

998262458
FV 801970: RNCC: 3 | RNVC: 2
CV.1970: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-974-0841
Access Cover

999740841
FV2255544: RNCC: 3 | RNVC: 2
ID2413: RNCC: 6 | RNVC: 9

23 Oct 2004

5340-99-891-0044
Mounting Bracket

998910044
FV 2231880: RNCC: 3 | RNVC: 2
FP982XH0005: RNCC: 6 | RNVC: 9

2 Dec 1998

5340-99-837-0997
Access Cover

998370997
14532208: RNCC: 3 | RNVC: 2
CV185893: RNCC: 5 | RNVC: 2
VOE14532208: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-860-0170
Access Cover

998600170
LN36988: RNCC: 3 | RNVC: 2
002D1-025: RNCC: 6 | RNVC: 9

28 Nov 2000

5340-99-730-4344
Section Block Clamp

997304344
6-4S10101: RNCC: 3 | RNVC: 2
26DL13489: RNCC: 6 | RNVC: 9

8 May 2002

5340-99-794-7161
Mounting Bracket

997947161
7543A-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-865-2535
Helical Compression Spring Seat

998652535
FV141886: RNCC: 3 | RNVC: 2
10FV141886: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-669-0752
Dust And Moisture Seal Protective Cap-Plug

996690752
V2004396: RNCC: 3 | RNVC: 2
CV200368: RNCC: 5 | RNVC: 2

8 Nov 2013

5340-99-256-9535
Angle Bracket

992569535
FV2048056: RNCC: 3 | RNVC: 2
HH3/MV 0555: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-681-5706
Bumper

996815706
RQM-30502: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-99-613-0754
Loop Clamp

996130754
CSP34-08: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-951-6675
Spacing Threaded Standoff

999516675
614-2-01153: RNCC: 3 | RNVC: 2

2 Feb 1990

5340-99-480-7624
Dust And Moisture Seal Protective Cap

994807624
A-37-8769-01: RNCC: 3 | RNVC: 2

16 May 2001

5340-99-500-7394
Mounting Bracket

995007394
EA5335B019-041: RNCC: 3 | RNVC: 2
EA5335B019: RNCC: 5 | RNVC: 2
QE971MER304: RNCC: 6 | RNVC: 9

18 Aug 1997

5340-99-629-0515
Loop Clamp

996290515
BA 60008-9M: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-250-1548
Angle Bracket

992501548
NNR-1552: RNCC: 3 | RNVC: 2

10 Sep 2004

5340-99-271-0563
Expansion Shield

992710563
NO PRIMARY REF 99-271-0563: RNCC: 3 | RNVC: 2
378-5518: RNCC: 5 | RNVC: 2

31 May 2011

5340-99-762-5343
Blank Panel

997625343
P-910449-413: RNCC: 3 | RNVC: 2
P910449-413: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-803-2974
Pivot Block

998032974
V35-1489-50: RNCC: 3 | RNVC: 2
V35-1489-50: RNCC: 5 | RNVC: 2

6 Jan 1989

5340-99-831-7938
Webbing Strap

998317938
15354: RNCC: 3 | RNVC: 2
15354-B: RNCC: 5 | RNVC: 2

9 Mar 1995

5340-99-111-0914
Spring Tension Clip

991110914
SCB1609-17-4: RNCC: 3 | RNVC: 2
30-611-111: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-720-8438
Angle Bracket

997208438
P-870224-003: RNCC: 3 | RNVC: 2
P870224-003: RNCC: 5 | RNVC: 2

13 Jun 1991

5340-99-366-5610
P Mounting Assembly

993665610
EB5332B099-043: RNCC: 3 | RNVC: 2

12 Feb 2004

5340-99-647-3873
Rod End Clevis

996473873
46/5042/14/501: RNCC: 3 | RNVC: 2
Y/530/A01/229: RNCC: 5 | RNVC: 1
SSN.07/Y/530/A01/229: RNCC: 5 | RNVC: 2

19 Jan 1999

5340-99-203-7560
Compression Cup

992037560
137110: RNCC: 3 | RNVC: 2
137110-5: RNCC: 5 | RNVC: 1
137110: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-666-7786
Mounting Bracket

996667786
75A160210-2002: RNCC: 3 | RNVC: 2
065VE-010: RNCC: 6 | RNVC: 9

14 Dec 2006

5340-99-455-9620
Webbing Strap

994559620
29426-193: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-99-775-9232
General Purpose Resilient Mount

997759232
NO PRIMARY REF 99-775-9232: RNCC: 3 | RNVC: 2
237-2048: RNCC: 5 | RNVC: 2

14 Jan 2000

5340-99-135-0970
Expansion Shield

991350970
D2: RNCC: 3 | RNVC: 2
REVS3-35HS1852: RNCC: 6 | RNVC: 9
DEFSTAN53-74: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-110-9932
Electrical-Mec Post

991109932
WEA119665: RNCC: 3 | RNVC: 2
ARR9582-81A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-619-2539
Flush Catch

996192539
H5000-040-156: RNCC: 3 | RNVC: 2
26NB4923: RNCC: 6 | RNVC: 9
26TA7485: RNCC: 6 | RNVC: 9
26WA2475: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-492-8914
Access Cover

994928914
EA5230B255-045: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-99-160-4896
Angle Bracket

991604896
28875-205: RNCC: 3 | RNVC: 2

16 Dec 2013

5340-99-702-0730
Fixing Kit

997020730
BR8472: RNCC: 3 | RNVC: 1
DNA225: RNCC: 6 | RNVC: 9
DNA225: RNCC: 6 | RNVC: 9

4 Jan 1996

5340-99-214-1875
Manual Control Lever

992141875
GMC81854: RNCC: 3 | RNVC: 2
0EC2364: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-604-2318
Retaining Strap

996042318
A292818: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-172-1425
Mounting Bracket

991721425
CC2373: RNCC: 3 | RNVC: 2

15 Aug 2007

5340-99-352-4506
Angle Bracket

993524506
FV 2200658: RNCC: 3 | RNVC: 2

3 Jun 2005

5340-99-412-7069
Nosecap

994127069
P48372: RNCC: 3 | RNVC: 2
1MEV8L9: RNCC: 6 | RNVC: 9

22 Dec 2000

5340-99-262-1748
Dust And Moisture Seal Protective Cap

992621748
CH12370: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-99-626-5614
Spring Tension Clip

996265614
3AB15475: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-633-9695
Access Cover

996339695
SDC242673: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-4426
Dust And Moisture Seal Protective Cap

992124426
199483: RNCC: 3 | RNVC: 2
40 000 236: RNCC: 5 | RNVC: 2

2 Jul 2002

5340-99-424-3905
Spring Tension Clip

994243905
F206078: RNCC: 3 | RNVC: 2
F206078: RNCC: 5 | RNVC: 9
26FX6933: RNCC: 6 | RNVC: 9
26FX6933: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-110-1524
Mounting Plate

991101524
FV 2162220: RNCC: 3 | RNVC: 2
FV 2162220: RNCC: 5 | RNVC: 2
FV 2162220: RNCC: 5 | RNVC: 2

18 Dec 1992

5340-99-622-0115
Butt Hinge

996220115
073424: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-611-8494
Engine Accessory Bracket

996118494
JR22893A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-301-1584
Plate

993011584
203652: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-99-553-8663
Bracket

995538663
M5725530020100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-101-5586
Screw Retainin Ring

991015586
RU17061: RNCC: 3 | RNVC: 2
RU17061: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-99-251-9311
Retaining Strap

992519311
1708A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-137-5958
Screw Thread Insert

991375958
KNM6X1: RNCC: 3 | RNVC: 2
KNM6X1: RNCC: 5 | RNVC: 2
KNM6: RNCC: 5 | RNVC: 2
352J0002: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-127-2424
Dust And Moisture Seal Protective Plug

991272424
MBEU187794: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-99-350-3024
Corner Pad

993503024
T782-F: RNCC: 3 | RNVC: 2
POG018267: RNCC: 5 | RNVC: 2

31 May 2000

5340-99-775-6487
Conduit Sto Bracket

997756487
MA 14273/B: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-99-658-8907
Dust And Moisture Seal Protective Cap

996588907
2-20574: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-99-322-3526
General Purpose Resilient Mount

993223526
2197 2231-320: RNCC: 3 | RNVC: 2
2197 2231-320: RNCC: 5 | RNVC: 2
993691341: RNCC: 6 | RNVC: 9

4 Sep 2002

5340-99-725-8155
Dust And Moisture Seal Protective Cap

997258155
B81601: RNCC: 1 | RNVC: 2
SP26002: RNCC: 3 | RNVC: 2
856AK1595: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-733-8579
Loop Clamp

997338579
84710151: RNCC: 3 | RNVC: 2
84710151: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-735-0491
Rod End Clevis

997350491
NE33998: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-726-0650
Escutcheon Plate

997260650
K3496ALM: RNCC: 3 | RNVC: 2
2500050885: RNCC: 5 | RNVC: 2

19 Aug 2010

5340-99-870-6051
Mounting Bracket

998706051
FV 2197587: RNCC: 3 | RNVC: 2

6 Jul 1998

5340-99-617-0909
Dust And Moisture Seal Protective Cap

996170909
HLN1091: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-508-2785
Double Angle Bracket

995082785
FV2267536: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-99-509-7237
Dust And Moisture Seal Protective Cap

995097237
12106: RNCC: 3 | RNVC: 2

6 May 2004

5340-99-305-3344
Metal Runner

5340-99-114-7596

5340-99-113-9076

5340-99-111-1088

5340-99-424-4142
Retaining Strap

994244142
F221834: RNCC: 3 | RNVC: 2
F221834: RNCC: 5 | RNVC: 9
26FX9092: RNCC: 6 | RNVC: 9
26FX9092: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-147-2024
Strap Assembly

991472024
6930330: RNCC: 3 | RNVC: 2

3 May 1995

5340-99-700-5140
Strap Retaining

997005140
2646E001: RNCC: 3 | RNVC: 2
2646E012: RNCC: 5 | RNVC: 9
2646E014: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-423-0915
Compression Cup

994230915
GM3020: RNCC: 3 | RNVC: 2
GM3020: RNCC: 5 | RNVC: 2
4Q2730: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-570-5995
Pres Disc Indicator

995705995
815301: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-99-197-1638
Mounting Bracket

991971638
6930463: RNCC: 3 | RNVC: 2
FF9530C0141: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-202-1624
Rod End Clevis

992021624
JS1403UF: RNCC: 3 | RNVC: 2
1HR187: RNCC: 5 | RNVC: 9
00001-02017: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-773-4645
Buckle

997734645
DB2003070: RNCC: 3 | RNVC: 2

21 Aug 2008

5340-99-773-3476
Double Angle Bracket

997733476
PN00001096: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-99-773-1608
Breather Pipe Assem

997731608
FV.681070: RNCC: 3 | RNVC: 2

22 Sep 1987

5340-99-780-4179
Retaining Strap

997804179
100171-1109-ASY: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-497-9249
Section Block Clamp

994979249
POG089547: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-99-212-7443
Mounting Bracket

992127443
WG1310-0931-103: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-99-127-6645
Quick Release Pin

991276645
Z404-24: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-551-4735
Mounting Bracket

995514735
80037957: RNCC: 3 | RNVC: 2
07101-009: RNCC: 6 | RNVC: 9

28 Feb 2007

5340-99-457-8486
Retaining Band

994578486
NO PRIMARY REF 99-457-8486: RNCC: 3 | RNVC: 2
Q3674: RNCC: 5 | RNVC: 1
5Q3674: RNCC: 5 | RNVC: 2
26TA9719: RNCC: 6 | RNVC: 9

7 Nov 1978

5340-99-144-1415
Loop Clamp

991441415
HT0813-12E: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-5343
Butt Hinge

991475343
110018-9652R: RNCC: 3 | RNVC: 2
26VC22870: RNCC: 6 | RNVC: 9

26 Jan 2002

5340-99-131-2540
Multiple Angle Bracket

991312540
110142-15555: RNCC: 3 | RNVC: 2
26VC-18847: RNCC: 6 | RNVC: 9

23 Jan 2002

5340-99-147-6479
Access Cover

991476479
R4062R: RNCC: 3 | RNVC: 2
031GS-001: RNCC: 6 | RNVC: 9

14 Apr 2003

5340-99-604-1264
Loop Clamp

996041264
STD2046-20-24: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-214-0841
Abrasive Wheel

992140841
NO PRIMARY REF 99-214-0841: RNCC: 3 | RNVC: 2
3D4065: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-215-5128
Angle

992155128
454-250 500.001: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-99-437-9579
Bracket

994379579
NO PRIMARY REF 99-437-9579: RNCC: 3 | RNVC: 2
B5267: RNCC: 5 | RNVC: 2
5UC6772: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-290-6383
Mounting Plate

992906383
BOF900294: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-99-872-2263
Bracket Assy

998722263
M5725455300000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-108-8514
Angle Bracket

991088514
EU62164: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-332-9449
Butt Hinge

993329449
8976/BR/031: RNCC: 3 | RNVC: 1
8976: RNCC: 5 | RNVC: 1
41ZZ183: RNCC: 6 | RNVC: 9
366-329449: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-183-3084
Upper Guide Pad

991833084
1026069-BD-03-006: RNCC: 3 | RNVC: 2
1026069-BD-03-006-01: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-99-739-7806
Mounting Bracket

997397806
KB956K0199-000S: RNCC: 3 | RNVC: 2
KB956K0199-000: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-750-9121
Access Cover

997509121
80038985: RNCC: 3 | RNVC: 2
80038985-01: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-99-462-9361
Lock

994629361
123/07382: RNCC: 3 | RNVC: 2

28 Mar 2003

5340-99-192-9537
Resilient Mount

991929537
NO PRIMARY REF 99-192-9537: RNCC: 3 | RNVC: 2
13-682: RNCC: 5 | RNVC: 1
EH1486: RNCC: 5 | RNVC: 2
B21-32-1486: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-153-8405
Clamp

991538405
DA453/850/15: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-99-553-1554
Access Cover

995531554
MS 21503: RNCC: 3 | RNVC: 2
446-877: RNCC: 5 | RNVC: 2
MS 21503/50: RNCC: 5 | RNVC: 2

13 Apr 1993

5340-99-456-1903
Rod End Connector

994561903
A1252-301-72: RNCC: 3 | RNVC: 2
88520-500-815: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-213-5458
Line Supporting Strap

992135458
90464-48800: RNCC: 3 | RNVC: 2
90464-48800: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-99-371-1598
Mounting Bracket

993711598
16894-150: RNCC: 3 | RNVC: 2
072DY-002: RNCC: 6 | RNVC: 9
SPCISR 10/2/47/22: RNCC: 6 | RNVC: 9

10 May 2007

5340-99-215-4881
Access Cover

992154881
A2-98965-1: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-99-668-0737
Dust And Moisture Seal Protective Cap-Plug

996680737
NO PRIMARY REF 99-668-0737: RNCC: 3 | RNVC: 2
40004027: RNCC: 5 | RNVC: 2
P106-25M: RNCC: 5 | RNVC: 2

10 Aug 2011

5340-99-710-3589
Nut And Bolt Locking Plate

997103589
SJC1760-0-925: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-614-0746
Mounting Bracket

996140746
GD603101: RNCC: 3 | RNVC: 2

4 Oct 2013

5340-99-660-9103
Mounting Bracket

996609103
WARGRA10138: RNCC: 3 | RNVC: 2
WARGRA10138: RNCC: 5 | RNVC: 2
WARGRA10138: RNCC: 5 | RNVC: 2

2 Aug 1994

5340-99-424-4815
Access Cover

994244815
B203448: RNCC: 3 | RNVC: 2
B203448: RNCC: 5 | RNVC: 9
26FX9406: RNCC: 6 | RNVC: 9
26FX9406: RNCC: 6 | RNVC: 9

15 Oct 1979

5340-99-947-1505
Clip Retainer Plate

999471505
RLL: RNCC: 3 | RNVC: 2
A95910: RNCC: 5 | RNVC: 2
CR44968: RNCC: 5 | RNVC: 2
0568-209153: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-631-9115
Loop Clamp

996319115
Y041DG402866: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-419-3281
Bumper

994193281
PIV100055: RNCC: 3 | RNVC: 2
81674040015: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-99-341-3574
Retaining Strap

993413574
MBEU91750: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-476-6094
T Bracket

994766094
D101675-1: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-99-934-6682
Mounting Bracket

999346682
A.7650096.1: RNCC: 3 | RNVC: 2
A.7650096.1: RNCC: 6 | RNVC: 9
FL9638D0003: RNCC: 6 | RNVC: 9
FK970280011: RNCC: 6 | RNVC: 9

22 Jun 1996

5340-99-610-7866
Dust And Moisture Seal Protective Cover

996107866
JR21580: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-152-2309
Mounting Plate

991522309
40004401: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-99-755-4625
Electrical-Mec Post

997554625
AM2034: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-726-5297
Cover Retainer

997265297
12100003179: RNCC: 3 | RNVC: 2
12200010561: RNCC: 5 | RNVC: 2

5 Apr 2011

5340-99-727-0746
Mounting Plate

997270746
40005864: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-99-961-4150
Spring Tension Clip

999614150
ST188K4N: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-954-1033
Retaining Strap

999541033
03-53811: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-972-3450
Bow Handle

999723450
30C: RNCC: 3 | RNVC: 2
SK345: RNCC: 5 | RNVC: 1
B459334: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-729-0533
Webbing Strap

997290533
SA00000259: RNCC: 3 | RNVC: 2

17 Mar 2008

5340-99-727-7030
Tube End Cap

997277030
90120: RNCC: 3 | RNVC: 2
FL982TF0184: RNCC: 6 | RNVC: 9

24 Feb 1999

5340-99-727-0454
Location Pin

997270454
FV 2029343: RNCC: 3 | RNVC: 2

7 Feb 1986

5340-99-902-1193
Manual Control Lever

999021193
01TC15017: RNCC: 3 | RNVC: 2
01TC15017: RNCC: 6 | RNVC: 9

12 Jul 1991

5340-99-934-1150
Bracket

999341150
M5755339300000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-933-9525
Strap Assembly

999339525
698288: RNCC: 3 | RNVC: 2
UWS3E4: RNCC: 6 | RNVC: 9

7 Jul 2005

5340-99-960-3769
Ball Socket Seat

999603769
AN31423: RNCC: 3 | RNVC: 2
AN31423: RNCC: 5 | RNVC: 1
M2AN31423: RNCC: 6 | RNVC: 9
7S1005: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-960-1664
Access Cover

999601664
0S59437: RNCC: 3 | RNVC: 2
0S59437: RNCC: 5 | RNVC: 2
V40S59437: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-958-4379
Mechanic Equipment Hardware Kit

999584379
FV2306833: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-99-902-2834
Mounting Bracket

999022834
6930650: RNCC: 3 | RNVC: 2
FF9530C0142: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-900-9506
Helical Compression Spring Seat

999009506
EU22666: RNCC: 3 | RNVC: 2
36SY694: RNCC: 6 | RNVC: 9
36SY694: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-824-6822
Mounting Bracket

998246822
515506: RNCC: 3 | RNVC: 2
515506: RNCC: 5 | RNVC: 2
515506: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-825-1350
Sliding Stay

998251350
FV759035: RNCC: 3 | RNVC: 2

1 Mar 1977

5340-99-600-0239
Double Angle Bracket

996000239
6-4TR359A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-297-7684
Locking Unit

992977684
25.18.1850: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-99-370-9717
Control Rod

993709717
MZK2402: RNCC: 3 | RNVC: 2

25 Jan 1994

5340-99-214-7904

5340-99-214-4791

5340-99-207-6350
Resilient Mount

5340-99-665-2985
Arched Cushion

996652985
EN4115F6N0064: RNCC: 2 | RNVC: 2

1 Jun 2001

5340-99-148-0279
Stowage Bracket Ass

991480279
FV30265527: RNCC: 3 | RNVC: 2

5 Nov 2007

5340-99-522-8491
Retaining Strap

995228491
FV 957558: RNCC: 3 | RNVC: 2
FV 957558: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-152-8622
Mechanic Equipment Hardware Kit

991528622
IM6617: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-99-754-7197
Face Assembly

997547197
38561-268: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-99-806-5057
Swivel Caster

998065057
SM555: RNCC: 3 | RNVC: 2
10IN.PN SWIVEL: RNCC: 5 | RNVC: 2
98PI01-465: RNCC: 6 | RNVC: 9

24 Feb 1999

5340-99-554-4931
Retaining Strap

995544931
34021906: RNCC: 3 | RNVC: 1
34-0219-06: RNCC: 5 | RNVC: 2
BDC9189: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-667-7442
Pipe Hanger

996677442
EC2810B025-045: RNCC: 3 | RNVC: 2

22 Oct 2010

5340-99-790-2219
Section Block Clamp

997902219
75A697360-2003: RNCC: 3 | RNVC: 2
SL4858: RNCC: 5 | RNVC: 1
SL4858B10D8RB: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-501-4964
Rim Latch

995014964
B207-A0001: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-99-631-5259
Access Cover

996315259
2705-8670-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-143-0788
Multiple Angle Bracket

991430788
110079-2802: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-4682
Rod End Clevis

998304682
FV932140: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-378-4883
Handle Grip

993784883
07256315: RNCC: 3 | RNVC: 2
331/42642: RNCC: 5 | RNVC: 2

28 Sep 2011

5340-99-852-6027
Mounting Plate

998526027
41215327: RNCC: 3 | RNVC: 2
CV175717A: RNCC: 5 | RNVC: 2

3 Mar 2011

5340-99-873-9295
Seat

998739295
MC1283014: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-99-881-4563
P Type Clamp

998814563
DDS8241B03: RNCC: 3 | RNVC: 2

14 Jan 2006

5340-99-859-8256
Mounting Plate

998598256
40001230: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-99-826-9531
Retaining Strap

998269531
FV989131: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-4821
Loop Clamp

998384821
91029197: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-8687
Loop Clamp

998268687
FV882642: RNCC: 3 | RNVC: 2

5 Feb 1991

5340-99-835-8404
Mounting Bracket

998358404
FV491050: RNCC: 3 | RNVC: 2

10 May 1980

5340-99-830-9637
Loop Clamp

998309637
0E25835: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-849-1307
Retaining Strap

998491307
FV137045: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-887-6642
Access Cover

998876642
119773-44060: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-99-861-9590
Block Clamp

998619590
CAD2-2932 REV C1: RNCC: 3 | RNVC: 2
CAD2-2932: RNCC: 5 | RNVC: 1

14 Sep 1995

5340-99-454-3717
Loop Clamp

994543717
5000874: RNCC: 3 | RNVC: 2
SAE 1/2Z CODE 62: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-99-657-5061
Multiple Angle Bracket

996575061
P-931360-405: RNCC: 3 | RNVC: 2
P931360-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-341-5085
General Purpose Resilient Mount

993415085
ACP/0008090/1129KG: RNCC: 3 | RNVC: 2
ACP/0008090: RNCC: 5 | RNVC: 1
LSG3-2-200MM75SH: RNCC: 5 | RNVC: 2
14770642: RNCC: 5 | RNVC: 2

13 Aug 2008

5340-99-474-4866
Manual Control Lever

994744866
P-080440-009: RNCC: 3 | RNVC: 2
P080440-009: RNCC: 5 | RNVC: 2

8 Jun 1999

5340-99-327-4586
Mounting Bracket

993274586
B409-PRT-034: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-99-615-4347
Loop Clamp

996154347
KB921K0593-000: RNCC: 3 | RNVC: 2
G3 400-91-7122: RNCC: 5 | RNVC: 2
G3 400-91-7122: RNCC: 5 | RNVC: 2
KB921K0593-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-467-6919
Access Cover

994676919
NDN1937-301: RNCC: 3 | RNVC: 2
6TH6199: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-987-5328
Electronic Equipment Hardware Kit

999875328
6308-318C: RNCC: 3 | RNVC: 2
6308-318/3: RNCC: 5 | RNVC: 2
6308-318 ITEM 3: RNCC: 5 | RNVC: 2
V6308-318/3: RNCC: 5 | RNVC: 2
V6308-318 ITEM 3: RNCC: 5 | RNVC: 2

25 Mar 1997

5340-99-971-2969
General Purpose Resilient Mount

999712969
FV645784: RNCC: 3 | RNVC: 2
GB6300-4: RNCC: 5 | RNVC: 2
A3-1648A13ITEM2: RNCC: 5 | RNVC: 2
GB6300-4BARRYMOUNT: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-254-9708
Rubber Bumper

992549708
FV1054709: RNCC: 3 | RNVC: 2
FV1054709: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-946-2024
Dust And Moisture Seal Protective Cap

999462024
5AA32565: RNCC: 3 | RNVC: 2
5AA32565: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-718-6687
Angle Bracket

997186687
V102931: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-495-6790
Locking Plate

994956790
50965033: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-257-7906
Mounting Bracket

992577906
FV 2190447: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-603-6084
Retaining Strap

996036084
F275871: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-517-3277
Handle Grip

995173277
MG.6357: RNCC: 3 | RNVC: 2
NR3015E: RNCC: 5 | RNVC: 2
FH964900001: RNCC: 6 | RNVC: 9

22 Oct 1996

5340-99-406-8053
Backing Plate Defle

994068053
S027704: RNCC: 3 | RNVC: 2

20 May 2004

5340-99-647-1722
Angle Bracket

996471722
JJ101652: RNCC: 3 | RNVC: 2
JJ101652: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-646-3156
Electrical-Mec Post

996463156
607-9807G2: RNCC: 3 | RNVC: 2
A135871: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-212-6289
Plate

992126289
AE8943GSEREF1: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-99-309-1065
Clamp Base

993091065
42211804: RNCC: 3 | RNVC: 2

10 Oct 2002

5340-99-132-7191
Sizing Former

991327191
T1495: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-99-460-8323
Loop Clamp

994608323
A71038: RNCC: 3 | RNVC: 2
36AL1202: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-501-1524
Karabiner

995011524
BLR3068: RNCC: 3 | RNVC: 2
FV 2202689: RNCC: 5 | RNVC: 2

6 Oct 1994

5340-99-567-4286
Bracket

995674286
M5755277720000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-666-7353
Mounting Bracket

996667353
16197: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-99-541-6948

5340-99-605-5709
Spring Tension Clip

5340-99-652-7333

5340-99-560-3033
Plastics Bumper

5340-99-619-5579

5340-99-533-2520

5340-99-613-1346
Angle Bracket

5340-99-539-4553
Dust Protective Cap

5340-99-605-5741
Angle Bracket

5340-99-634-6926
Electrical-Mec Post

5340-99-530-9255

5340-99-192-4124
Angle Bracket

991924124
V102970: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-99-414-3458
Rod End Connector

994143458
C3623Y3: RNCC: 3 | RNVC: 2
27Q13376: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-424-4551
Loop Clamp

994244551
F189595: RNCC: 3 | RNVC: 2
F189595: RNCC: 3 | RNVC: 9
26FX2768: RNCC: 6 | RNVC: 9
26FX2768: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-197-2875
Spacer

991972875
A9502-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-609-9631
Loop Clamp

996099631
STD471-9: RNCC: 1 | RNVC: 2
J9: RNCC: 3 | RNVC: 2
A3STD471-9: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-739-5039
Pin Carrying Collar

997395039
C.H.75129: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-734-3825
Heli-Coil

997343825
MP2743A: RNCC: 3 | RNVC: 2
989009385: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-638-8810
Nonmetallic Bushing

996388810
Y041DG421460: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-573-5739
Mounting Bracket

995735739
MXK 2527: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-99-664-0348
Butt Hinge

5340-99-738-8616

5340-99-208-7197

5340-99-701-8661

5340-99-701-5924
Filler Opening Cap

5340-99-738-9317

5340-99-037-0107
Snap Plain Standoff

5340-99-083-1057

5340-99-567-0636

5340-99-111-0584

5340-99-943-3803
Internal Thr Spacer

999433803
P190737: RNCC: 3 | RNVC: 2

24 Apr 1989

5340-99-909-6400
Spacing Threaded Standoff

999096400
FV2271783: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-99-908-2398
Mounting Plate

999082398
FV2300969: RNCC: 3 | RNVC: 2

15 Dec 2011