What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 91 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 91 of 368

5340-99-835-3248
Guard

998353248
82009833: RNCC: 3 | RNVC: 2
82005515: RNCC: 5 | RNVC: 9

9 Jun 2004

5340-99-961-4149
Spring Tension Clip

999614149
ST188K5N: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-8590
Wiring Electri Clip

998268590
FV968068: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-8624
Retaining Strap

998238624
34021907: RNCC: 3 | RNVC: 2
X107B: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-6198
Loop Clamp

998346198
FV 2194281: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-99-856-3658
Mounting Bracket

998563658
2EFML66536: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-844-6282
Expansion Plug

998446282
BT557: RNCC: 3 | RNVC: 2
LV7SLBT557: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-151-6259
Mechanic Equipment Hardware Kit

991516259
FV2306834: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-99-844-1551
Rod End Clevis

998441551
29W9: RNCC: 3 | RNVC: 2
29W9: RNCC: 5 | RNVC: 2
LV7SL29W9: RNCC: 6 | RNVC: 9
0821SL29W9: RNCC: 6 | RNVC: 9
61SC40531: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-835-3410
Access Cover

998353410
F29505: RNCC: 3 | RNVC: 2
LV7FWF29505: RNCC: 6 | RNVC: 9
61AE30534: RNCC: 6 | RNVC: 9

3 Oct 1978

5340-99-902-9366
Double Angle Bracket

999029366
00A0554A: RNCC: 3 | RNVC: 2
FV2291772: RNCC: 5 | RNVC: 2

15 Jan 2008

5340-99-834-4097
Angle Bracket

998344097
FV2265355: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-99-835-8408
Mounting Bracket

998358408
FV490957: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-887-6516
Webbing Strap

998876516
246756: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

6 Feb 2007

5340-99-165-4011
Multiple Angle Bracket

991654011
330E68-1154-24: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-687-2470
Mounting Bracket

996872470
EA5330B018-103: RNCC: 3 | RNVC: 2

7 Jun 2008

5340-99-138-8455
Barrel Bolt

991388455
123-030-800: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-954-3087
Spring Tension Clip

999543087
608-2-04656: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-668-3081
Access Cover

996683081
5300-2224: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-99-162-8362
Retaining Strap

991628362
S4NY-P-A43: RNCC: 3 | RNVC: 2

29 Jul 2009

5340-99-676-5207
Dust And Moisture Seal Protective Cap

996765207
SSK/Y/327/40/0402/145: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-99-727-2554
Rigid Caster

997272554
OE-A-14334: RNCC: 3 | RNVC: 2

4 Sep 2012

5340-99-192-9158
Rubber Bumper

991929158
367: RNCC: 3 | RNVC: 2
B20176: RNCC: 5 | RNVC: 2
B08-70-4363: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-856-4500
Mounting Plate

998564500
NB-45-2175: RNCC: 3 | RNVC: 2
PC-A-27-50-00-02A-941A-A ITEM 66: RNCC: 5 | RNVC: 2
116Z9-011: RNCC: 6 | RNVC: 9

5 Oct 2011

5340-99-558-4227
Manual Control Lever

995584227
SSN11M541-00-5-21: RNCC: 3 | RNVC: 2
001212343: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-459-1214
Fork End

994591214
NO PRIMARY REF 99-459-1214: RNCC: 3 | RNVC: 2
PE2950: RNCC: 5 | RNVC: 2
40B1847: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-519-4518
Lighting Bracket

995194518
FV2214761: RNCC: 3 | RNVC: 2
042UK-001: RNCC: 6 | RNVC: 9

26 Aug 2004

5340-99-227-5814
Dust And Moisture Seal Protective Plug

992275814
MR200(A4)7938: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-657-8566
Retaining Strap

996578566
JJ104293: RNCC: 3 | RNVC: 2
JJ104293: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-203-3351
Clamping Catch

992033351
906: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-144-5478
Handwheel

991445478
MBEU26568: RNCC: 3 | RNVC: 2
AMBEU26568: RNCC: 5 | RNVC: 2
MBEU26568: RNCC: 5 | RNVC: 2
MBEU26568: RNCC: 5 | RNVC: 2
AMBEU26568: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-109-5953
Retaining Strap

991095953
SDA218489: RNCC: 3 | RNVC: 2
SDA218489: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-467-5638
Loop Clamp

994675638
BL15: RNCC: 3 | RNVC: 2
CE14382: RNCC: 5 | RNVC: 1
26WX4432: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-264-1084
Mounting Bracket

992641084
1915002: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-99-760-7921
Webbing Strap

997607921
FV 2109765: RNCC: 3 | RNVC: 2
FV 2109765: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-760-2850
Loop Clamp

997602850
36632112: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-739-6394
Door Closer

997396394
204: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-775-2675
Loop Clamp

997752675
551394: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-755-1001
Electrical-Mec Post

997551001
698 1828: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-99-631-9274
Nonmetallic Bushing

996319274
PE24: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-650-7836
Retaining Strap

996507836
200590814: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-131-9019
Connecting Rod Set

991319019
87790307: RNCC: 3 | RNVC: 2

11 May 2004

5340-99-195-0352
Angle Bracket

991950352
JR27960: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-99-477-2616
Resilient Mount

994772616
E2134: RNCC: 3 | RNVC: 2
FV 2059313: RNCC: 5 | RNVC: 2
FV 2059313: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-131-5166
Webbing Strap

991315166
124CA24: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-99-582-5817
Location Post

995825817
SA00000084: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-99-451-7377
General Purpose Resilient Mount

994517377
AVA2310A: RNCC: 3 | RNVC: 2
X2XCM60-2310A: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-917-1420
Access Cover

999171420
SST/Y/265/01/2301/300: RNCC: 3 | RNVC: 2
001299559 SHEET 9 ISSUE 4 PART -: RNCC: 5 | RNVC: 1
SST/Y/265/01/2301/200 SHEET 9 I-: RNCC: 5 | RNVC: 1

30 Sep 1997

5340-99-027-6616
Shimmy Damper

990276616
212: RNCC: 3 | RNVC: 2
SF0625 5/8IN: RNCC: 5 | RNVC: 2

23 May 1991

5340-99-995-0722
Retaining Strap

999950722
NO PRIMARY REF 99-995-0722: RNCC: 3 | RNVC: 2
C2519/04: RNCC: 5 | RNVC: 2
K03206 ITEM 4: RNCC: 5 | RNVC: 2
K03206/4: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-99-622-9898
Angle Bracket

996229898
816060: RNCC: 3 | RNVC: 2
B816060: RNCC: 5 | RNVC: 2
816060: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-311-3544
Mounting Plate

993113544
CM46370: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-99-975-4125
Aero Transporter Wi

999754125
AT-LT 25: RNCC: 3 | RNVC: 2
37250/1: RNCC: 6 | RNVC: 9

5 Apr 2013

5340-99-362-7932
Mounting Bracket

993627932
33389-B-RL1: RNCC: 3 | RNVC: 2

20 May 2011

5340-99-144-3375
Resilient Mount

991443375
GBL1050TF4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-103-5266
Angle Bracket

991035266
BN52992: RNCC: 3 | RNVC: 2
36BC987: RNCC: 6 | RNVC: 9
36BC987: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-449-6355
Nut And Bolt Locking Plate

994496355
RK19656: RNCC: 3 | RNVC: 2
36DT1204: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-439-3455
Mounting Plate

994393455
FV 2218712: RNCC: 3 | RNVC: 2
FG970830001: RNCC: 6 | RNVC: 9

6 May 1997

5340-99-958-4082
Multiple Angle Bracket

999584082
POG094542: RNCC: 3 | RNVC: 2

2 Dec 2009

5340-99-958-2872
General Purpose Resilient Mount

999582872
80018833: RNCC: 3 | RNVC: 2

20 Aug 2008

5340-99-902-4164
Cover

999024164
5153319: RNCC: 3 | RNVC: 2

12 May 2004

5340-99-928-8070
Mounting Plate

999288070
K529428: RNCC: 3 | RNVC: 2

12 Aug 2011

5340-99-958-6166
Strap Fastener Loop

999586166
105478: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-99-936-3785
Mechanic Equipment Hardware Kit

999363785
K000070: RNCC: 3 | RNVC: 2
K000070: RNCC: 5 | RNVC: 2

2 May 2012

5340-99-927-3190
Escutcheon Plate

999273190
40008182: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-99-900-3385
Spring Tension Clip

999003385
RRA511085: RNCC: 3 | RNVC: 2
RRA511085: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-901-4896
Grooved Cou Segment

999014896
EU17178: RNCC: 3 | RNVC: 2
36SY995: RNCC: 6 | RNVC: 9
36SY995: RNCC: 6 | RNVC: 9

6 Aug 1990

5340-99-913-1291
General Purpose Resilient Mount

999131291
AVM113: RNCC: 3 | RNVC: 2
RRA824699: RNCC: 5 | RNVC: 2
6CA8231: RNCC: 5 | RNVC: 2
FV728845: RNCC: 5 | RNVC: 2
Z4ZD05085: RNCC: 6 | RNVC: 9
26FX10395: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-925-0218
Strap Hinge

999250218
MDA02A.104 ITEM 17: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-99-900-1368
General Purpose Resilient Mount

999001368
3SR6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-8846
Furniture Glide

999588846
996042: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-99-958-5373
Clamping Catch

999585373
K536013: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-99-935-3336
Detent Plunger

999353336
T5430023324: RNCC: 3 | RNVC: 2

15 Jan 1999

5340-99-900-0520
Synchro Clamp

999000520
RRA502661: RNCC: 3 | RNVC: 2

23 Sep 1982

5340-99-974-9814
Mounting Bracket

999749814
5262297: RNCC: 3 | RNVC: 2

17 May 2011

5340-99-975-3778
Headless Straight Rod

999753778
CH12808: RNCC: 3 | RNVC: 2

2 Nov 2012

5340-99-949-9969
Retaining Band

999499969
FV520363: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-229-8273
Mounting Plate

992298273
FV2265573: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-99-415-3793
Nut And Bolt Retainer

994153793
BA32756: RNCC: 3 | RNVC: 2
36VV5289: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-795-6695
Electrical-Mec Post

997956695
L-45-1056-50: RNCC: 3 | RNVC: 2
L-45-1056: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-215-8526
Regulator Air

992158526
S/3270/Z: RNCC: 3 | RNVC: 2
SR0421/9: RNCC: 5 | RNVC: 2
0946-92/9: RNCC: 6 | RNVC: 9

17 Jun 1997

5340-99-688-1252
Spring Tension Clip

996881252
NO PRIMARY REF 99-688-1252: RNCC: 3 | RNVC: 2
MXC1848: RNCC: 5 | RNVC: 2
FJ9914L0160: RNCC: 6 | RNVC: 9

9 Jul 1999

5340-99-253-3658
Compression Cup

992533658
B-TTW: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-327-8025
Mounting Bracket

993278025
3350011R1: RNCC: 3 | RNVC: 2
FJ980800001: RNCC: 6 | RNVC: 9

20 May 1998

5340-99-461-9277
Latch Peg

994619277
00-1097-1110: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-99-770-7894
Recess Handle

997707894
478K-HAN-170PL: RNCC: 3 | RNVC: 2
3090108: RNCC: 5 | RNVC: 2
50-42/S: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-461-1005
Bracket Plate

994611005
FV 2020748: RNCC: 3 | RNVC: 2
FO955ZZ0074: RNCC: 6 | RNVC: 9

20 Dec 1995

5340-99-734-6958
Retaining Strap

997346958
MDS3018A200: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-601-2296
Grooved Clamp Coupling

996012296
DE25476: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-205-3647
Mounting Plate

992053647
NTS10382: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-441-7779
Loop Clamp

994417779
FV2193442/30: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-99-212-9150
Loop Clamp

992129150
819/482: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-99-763-4110
General Purpose Resilient Mount

997634110
A12-00180: RNCC: 3 | RNVC: 2
TYPEM2: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-99-771-0421
Dust And Moisture Seal Protective Plug

997710421
100175-1800-005: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-784-8498
Padlock

997848498
CESNKCS-04-1/1 1.21: RNCC: 3 | RNVC: 2

11 Jul 1984

5340-99-746-8240
Parts Kit.Mount Res

997468240
FV893555-2: RNCC: 3 | RNVC: 2
6037-219A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-796-6277
General Purpose Resilient Mount

997966277
BR3021 VOLUME 2 CHAPTER 9: RNCC: 3 | RNVC: 1
1206646/2: RNCC: 5 | RNVC: 1
BR3021: RNCC: 5 | RNVC: 1
BR3021 VOLUME 2 TABLE 9.1: RNCC: 5 | RNVC: 1
1206646/2 ITEM 102: RNCC: 5 | RNVC: 2
13/Y/220/0051/M003 ITEM 104: RNCC: 5 | RNVC: 2
13/Y/220/0051/M003/104: RNCC: 5 | RNVC: 2
0413/923-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-272-2684
Access Cover

992722684
99-08-804: RNCC: 3 | RNVC: 2
F/K9/830 804/001: RNCC: 5 | RNVC: 2
MLS3B: RNCC: 6 | RNVC: 9
ME244/404/02/17A: RNCC: 6 | RNVC: 9

22 May 2001

5340-99-947-9352
Spring Tension Clip

999479352
101-1-4: RNCC: 3 | RNVC: 1
B16130: RNCC: 5 | RNVC: 2
80-08-70-9039: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-805-0891
Metall Buckle Strap

998050891
FV(S)7-3/2: RNCC: 3 | RNVC: 2
815963-2: RNCC: 6 | RNVC: 9
LV6MT4-78966: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-948-5667
Angle Bracket

999485667
52910211TEM4: RNCC: 3 | RNVC: 2
52910211TEM4: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-537-8905
Nonmetallic Bushing

995378905
1042-2420-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-571-3406
Headless Straight Rod

995713406
332/D4048: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-99-738-0604
Connecting Rod

997380604
VSG50205-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-946-3324
Spring Tension Clip

999463324
5AA30741: RNCC: 3 | RNVC: 2
5AA30741: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-726-0472
Angle Bracket

997260472
331/48466: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-937-0656
Support

999370656
117954A1: RNCC: 3 | RNVC: 2
CV121701: RNCC: 5 | RNVC: 2
117954A1: RNCC: 5 | RNVC: 2
CV121701: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-99-337-6234
Mechanical Stop

993376234
332/F3464: RNCC: 3 | RNVC: 2

18 May 2010

5340-99-958-8362
Bracket

999588362
M5725850720000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-826-6107
Retaining Strap

998266107
FV863313: RNCC: 3 | RNVC: 2
FV863313: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-749-8159
Dust And Moisture Seal Protective Cap

997498159
01T-C-10573: RNCC: 3 | RNVC: 2
01TC10573: RNCC: 5 | RNVC: 2
01T-C-10573: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-213-5961
Dust And Moisture Seal Protective Cap

992135961
EFA02-43-002: RNCC: 3 | RNVC: 2
EFA02-43-002: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-99-359-4431
Lock Assembly

993594431
NO PRIMARY REF 99-359-4431: RNCC: 3 | RNVC: 2
D336-14-020: RNCC: 5 | RNVC: 2
5D-4091: RNCC: 6 | RNVC: 9

3 Jun 2003

5340-99-310-8379
Mounting Plate

993108379
HK459-009-1005X: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-9678
Roller Guide

991479678
NO PRIMARY REF 99-147-9678: RNCC: 3 | RNVC: 2
683-127 STOCK NO 208: RNCC: 5 | RNVC: 2
B152-TT4449710: RNCC: 6 | RNVC: 9

9 Jan 2002

5340-99-995-1351
Access Cover

999951351
2169949: RNCC: 3 | RNVC: 2
81.67405-6073: RNCC: 5 | RNVC: 2

12 May 2009

5340-99-612-8968
Block Fairlead

996128968
121S75-757-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-724-1112
Block Fairlead

997241112
110164-1259: RNCC: 3 | RNVC: 2
26VC/16143: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-108-4420
Bow Handle

991084420
HDF400: RNCC: 3 | RNVC: 2
1021008C7: RNCC: 5 | RNVC: 2
999-4-34252-000: RNCC: 5 | RNVC: 2
660-04-880069-001-38: RNCC: 5 | RNVC: 2
478K-HAN-055PL: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-749-8141
Dust And Moisture Seal Protective Plug

997498141
01T-C-10226: RNCC: 3 | RNVC: 2
01TC10226: RNCC: 5 | RNVC: 2
01T-C-10226: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-427-9671
Retaining Strap

994279671
BA98823: RNCC: 3 | RNVC: 2
BA98823: RNCC: 5 | RNVC: 9
36VV20570: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-570-6435
Locking Stay

995706435
BI 11903: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-99-330-1343
Nut And Bolt Locking Plate

993301343
8794: RNCC: 3 | RNVC: 2
154956: RNCC: 5 | RNVC: 1
58690: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-299-0258
Access Cover

992990258
CBD12688G01: RNCC: 3 | RNVC: 2

4 Jan 2002

5340-99-348-2192
Mortise Latch Set

993482192
070-856: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-202-6358
Dust And Moisture Seal Protective Cap

992026358
1EB24821: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-255-8298
Assem Strap Bonding

992558298
MDS3018A300: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-406-1612
Expansion Plug

994061612
11272: RNCC: 3 | RNVC: 2
111272: RNCC: 5 | RNVC: 2
61DB10228: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-149-9741
Mounting Bracket

991499741
AML59071: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-99-591-2229
Dust And Moisture Seal Protective Cover

995912229
JRB5871: RNCC: 3 | RNVC: 2

17 Jul 1991

5340-99-440-9273
Dust And Moisture Seal Boot

994409273
E17807: RNCC: 3 | RNVC: 2
61AE20774: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-713-5801
Electrical-Mec Post

997135801
FLT249: RNCC: 3 | RNVC: 2
5CZ8808: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-194-8274
Retaining Strap

991948274
TRA755239: RNCC: 3 | RNVC: 2
TRA755239: RNCC: 5 | RNVC: 2
10AL2379: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-455-2631
Retaining Strap

994552631
S21: RNCC: 3 | RNVC: 1
5975-99N03-7441: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-613-7756
Mechanic Equipment Hardware Kit

996137756
AC-AA-035: RNCC: 3 | RNVC: 2

22 Jun 2012

5340-99-103-9251

5340-99-744-6709
Mounting Bracket

997446709
MBEU185408-1: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-99-831-1795
Bumper

998311795
15-451-2: RNCC: 3 | RNVC: 2
TG2616014T: RNCC: 5 | RNVC: 2
TG616014: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-551-5257
Mounting Bracket

995515257
L06566500: RNCC: 3 | RNVC: 2
L06567900 ITEM 3: RNCC: 5 | RNVC: 2
L06567900/3: RNCC: 5 | RNVC: 2

16 Aug 2007

5340-99-601-5447
Expansion Shield

996015447
09-100: RNCC: 3 | RNVC: 2
4115: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-517-5314
Access Cover

995175314
GD600003: RNCC: 3 | RNVC: 2

11 Nov 2004

5340-99-755-1802
Loop Clamp

997551802
WG1374-0244-041: RNCC: 3 | RNVC: 2
WG1374-0244 ITEM 1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-682-6625
Loop Clamp

996826625
FV2193442/13: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-99-733-5575
Loop Clamp

997335575
N.199545-1 ISSUE 2: RNCC: 3 | RNVC: 2
N.199545-1: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-653-4213
Screw Thread Insert

996534213
RL3391-2-2: RNCC: 1 | RNVC: 2
F1025CNPX3-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-374-3150
Rod End Clevis

993743150
110033-4700: RNCC: 3 | RNVC: 2
26VC-4523: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-490-4607
Mounting Bracket

994904607
824695-00: RNCC: 3 | RNVC: 2

23 Jul 2008

5340-99-152-2088
Retaining Strap

991522088
6225: RNCC: 3 | RNVC: 2
6225-35B: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-99-717-9431
Angle Bracket

997179431
023174: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-718-6566
Angle Bracket

997186566
V102785: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-117-1550

5340-99-104-1608

5340-99-104-5825

5340-99-603-1946
Grooved Clamp Coupling

996031946
BA25216-9: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-668-3529
Loop Clamp

996683529
50024561: RNCC: 3 | RNVC: 2

10 Feb 2012

5340-99-152-0430
Mounting Bracket

991520430
80029569: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-99-359-6054
Mounting Plate

993596054
1678224: RNCC: 3 | RNVC: 2
CV156121: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-99-524-8798
Mounting Plate

995248798
FV 2219076: RNCC: 3 | RNVC: 2
FG970840005: RNCC: 6 | RNVC: 9

7 May 1997

5340-99-651-9964
Rod End Clevis

996519964
P-410569-001: RNCC: 3 | RNVC: 2
P410569-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-744-7511
Turnbuckle

997447511
P-212445-401: RNCC: 3 | RNVC: 2
P212445-401: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-730-3665
Access Cover

997303665
PT0876-1-620496: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-668-2681
Mounting Plate

996682681
4993055: RNCC: 3 | RNVC: 2
81671100051: RNCC: 5 | RNVC: 2

16 Dec 2011

5340-99-182-6203
Mounting Plate

991826203
0208795: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-99-192-9470
Clamp Bolt Assembly

991929470
041545: RNCC: 3 | RNVC: 2
BA041545: RNCC: 5 | RNVC: 2
041545: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-455-1682
Spring Clip

994551682
6S551: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-234-5325
Double Angle Bracket

992345325
FV2268006: RNCC: 3 | RNVC: 2

9 May 2007

5340-99-110-8279
Spring Tension Clip

991108279
AS12851: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-435-0759
Phosphine Getter

994350759
88005090: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-99-748-2365
Line Supporting Strap

997482365
9275061: RNCC: 3 | RNVC: 2
09275061: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-735-2644
Loop Clamp

997352644
FV 1025101: RNCC: 3 | RNVC: 2

18 Apr 1991

5340-99-149-3542
Block Fairlead Section

991493542
110033-4391: RNCC: 3 | RNVC: 2
110033-4391: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-539-0045
Angle Bracket

995390045
B32927: RNCC: 3 | RNVC: 2

19 Mar 1990

5340-99-213-1062
Bracket

992131062
FV2268405: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-99-229-4584
Access Cover

992294584
CM0109077: RNCC: 3 | RNVC: 2

7 May 2003

5340-99-251-2949
Handle

992512949
4696C118: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-104-1198

5340-99-595-0654
Mounting Bracket

995950654
EA1805G028-125: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-99-526-5047
Retaining Strap

995265047
ST038204: RNCC: 3 | RNVC: 2
038204: RNCC: 5 | RNVC: 2
678-526-5047: RNCC: 6 | RNVC: 9
678-231670: RNCC: 6 | RNVC: 9
SECTIONS FUEL PIPEWORK: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-943-2210
Screw Thread Insert

999432210
AS6327-32: RNCC: 2 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-299-9980
Engine Accessory Bracket

992999980
33-00028-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-931-5487
General Purpose Resilient Mount

999315487
METAC0NE17-321-60: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-555-0630
Rod End Clevis

995550630
EA5230B262-101: RNCC: 3 | RNVC: 2
101UM-008: RNCC: 6 | RNVC: 9

18 Mar 2010

5340-99-428-4915
Tie Bar

994284915
FV 3022029: RNCC: 3 | RNVC: 2
BR90-46-46-15-0024: RNCC: 5 | RNVC: 2
FV 3022029: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-99-444-9161
Mount

994449161
NO PRIMARY REF 99-444-9161: RNCC: 3 | RNVC: 2
16792: RNCC: 5 | RNVC: 2
0611-62263: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-344-3818
Angle Bracket

993443818
70-71-986: RNCC: 3 | RNVC: 2

5 Mar 2008

5340-99-943-4330
Webbing Strap

999434330
FV271717: RNCC: 3 | RNVC: 2
Z3ZCFV271717: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-500-3005
Manual Control Lever

995003005
110079-4641: RNCC: 3 | RNVC: 2

3 Jul 1995

5340-99-300-6059
Mounting Bracket

993006059
110027-17727: RNCC: 3 | RNVC: 2
NHA 110027SHT313: RNCC: 6 | RNVC: 9
000TQ001: RNCC: 6 | RNVC: 9

20 Apr 2000

5340-99-151-8979
Blank Panel

991518979
AK20327M001: RNCC: 3 | RNVC: 2
CV174277: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-99-729-9973
Dust And Moisture Seal Protective Plug

997299973
BTE-A6001: RNCC: 3 | RNVC: 2
BTEA6001: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-812-5777
Mounting Bracket

998125777
70-65-148: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-99-947-8691
Aircr Traffic Light

999478691
NO PRIMARY REF 99-947-8691: RNCC: 3 | RNVC: 2
17-55231: RNCC: 5 | RNVC: 2
17-55231: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-748-5072
Mounting Plate

997485072
Q06/73852/00: RNCC: 3 | RNVC: 2
81691150004: RNCC: 5 | RNVC: 2

6 Apr 2009

5340-99-610-9158
Mounting Bracket

996109158
137210E57: RNCC: 3 | RNVC: 2
2-137210E57: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-775-2725
Tool Bracket Clip

997752725
G151G152: RNCC: 3 | RNVC: 2
17140304: RNCC: 5 | RNVC: 2
171-403-04: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-930-6259
Angle Bracket

999306259
HAH2636: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-99-106-5421
Double Angle Bracket

991065421
D030382: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-831-9859
Dust And Moisture Seal Boot

998319859
1B1735: RNCC: 3 | RNVC: 2
LV7AN1B1735: RNCC: 6 | RNVC: 9

25 Mar 1981

5340-99-834-8116
Butt Hinge

998348116
41023662: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-888-8728
Rod End Clevis

998888728
MBEU260P5: RNCC: 3 | RNVC: 2

22 Nov 1990

5340-99-883-3566
Sealing Plug Assembly

998833566
CH11622: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-99-790-3866
Loop Clamp

997903866
SZ/00095/00/001/02: RNCC: 3 | RNVC: 1
004464123: RNCC: 5 | RNVC: 1
MX/00095/00/001/02: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-535-3831
Access Cover

995353831
2706-00518: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-99-433-0896
Loop Clamp

994330896
80-10-0622B: RNCC: 3 | RNVC: 2
80-10-0622B: RNCC: 5 | RNVC: 9
5CX6407: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-615-2990
Angle Bracket

996152990
KB921K0211-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-550-4688
Handwheel

995504688
1756SH31TEM45: RNCC: 3 | RNVC: 2
1756-3-45: RNCC: 5 | RNVC: 2
H896-281726: RNCC: 6 | RNVC: 9

4 Jul 1989

5340-99-296-3158
Access Cover

992963158
NC9900-209-045: RNCC: 3 | RNVC: 2

8 Nov 2013

5340-99-536-3804
Access Cover

995363804
ND4132: RNCC: 3 | RNVC: 2
H492-175843: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-548-6063
Rod End Clevis

995486063
E9110-3: RNCC: 3 | RNVC: 2
H606-189497: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-390-9446
Protection Bellows

993909446
11/454/2/6/1713(A): RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-251-3782
Extension Drawer Slide

992513782
5012 TN: RNCC: 3 | RNVC: 1
A2/3391/1840: RNCC: 5 | RNVC: 2
5012 TN: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-222-7799
Bumper

992227799
1E4523: RNCC: 3 | RNVC: 2
39-9851: RNCC: 5 | RNVC: 2
SCA4-37937: RNCC: 5 | RNVC: 2
273K-FOT-019PL4: RNCC: 5 | RNVC: 2
34-0135: RNCC: 5 | RNVC: 2
SK12648: RNCC: 5 | RNVC: 2
273B-FOT-008SF: RNCC: 6 | RNVC: 9
273K-FOT-19PL: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-968-6746
Support Hook

999686746
830-00107: RNCC: 3 | RNVC: 2
5694-6601 ITEM 80: RNCC: 5 | RNVC: 2

26 Apr 2011

5340-99-356-4421
Pipe Clamp

993564421
110087-3883: RNCC: 3 | RNVC: 2

19 May 1993

5340-99-150-2115
Top Cover

991502115
AC024618: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-495-8610
Butt Hinge

994958610
1401S: RNCC: 3 | RNVC: 1

28 Jun 1991

5340-99-453-6656
Dust And Moisture Seal Protective Cover

994536656
V21064: RNCC: 3 | RNVC: 2
36AD3466: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-643-3308
Retaining Strap

996433308
EH9423: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-551-2592
Block Clamp

995512592
EA127B10: RNCC: 1 | RNVC: 2
B10: RNCC: 3 | RNVC: 2
TA30500560B10: RNCC: 3 | RNVC: 2

28 Feb 1995

5340-99-101-2906

5340-99-611-5026
Retaining Strap

5340-99-661-1287
Angle Bracket

5340-99-608-1274
Dust Protective Cap

5340-99-663-7695
Angle Bracket

5340-99-661-1457
Resilient Mount

5340-99-619-2266

5340-99-661-1300
Retaining Strap

5340-99-663-3589
Mounting Plate

5340-99-740-8031
Flar Plate Mounting

5340-99-430-2990
Loop Clamp

994302990
999/7/32439/000: RNCC: 3 | RNVC: 2
RSGU1-32/20-1: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-609-6713
Helical Compression Spring Seat

996096713
868-281: RNCC: 3 | RNVC: 2
D868-281: RNCC: 5 | RNVC: 2
D868-281: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-123-8786
Rod End Clevis

991238786
RK8675: RNCC: 3 | RNVC: 2
36DT1297: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-105-2024
Retaining Strap

991052024
EAP4727: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-433-3400
Mounting Bracket

994333400
80036850: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-99-212-7262
Tab Term

992127262
18018: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-99-801-7969
Leather Strap

5340-99-620-2732

5340-99-582-5852
Section Block Clamp

995825852
POG089545: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-99-150-0105
Dust And Moisture Seal Protective Cover

991500105
A1R115150: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-626-4314
Retaining Strap

996264314
3AB12204: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-507-4117
Mounting Bracket

995074117
DA766050: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-99-750-4842

5340-99-754-9554
Dust Protective Cap

5340-99-564-2930
Cover

5340-99-495-8599
Handwheel

5340-99-500-2290
Mounting Plate

5340-99-750-8274
Bracket

5340-99-774-3114

5340-99-556-4124

5340-99-500-2063
Power Clip

5340-99-474-6419
Synchro Clamp

994746419
FV2279320: RNCC: 3 | RNVC: 2
0721B-014: RNCC: 6 | RNVC: 9

19 Apr 2007

5340-99-199-5406
Rim Clenching Clamp

991995406
NO PRIMARY REF 99-199-5406: RNCC: 3 | RNVC: 2
SUM1160: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-711-2517
Mounting Bracket

997112517
25FR455-116: RNCC: 3 | RNVC: 2
26TD-3341: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-798-6339
Clamping Catch

997986339
27-633 AND 02-633: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-135-1564
Mounting Plate

991351564
N27200235-001: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-99-774-3107
Buckle

997743107
SL-25: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-2985
Rod End Clevis

998082985
350-277: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-99-299-9321
Leather Strap

992999321
110642-11219ND: RNCC: 3 | RNVC: 2
110642SHT3713: RNCC: 5 | RNVC: 1
110642 SHT 3713: RNCC: 5 | RNVC: 9
110642-11219ND: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-613-8940
Mounting Bracket

996138940
EU5306P116-051: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-99-087-1766
Handle

990871766
SR1659/9: RNCC: 3 | RNVC: 2
SA6555: RNCC: 6 | RNVC: 9
0072-94/9: RNCC: 6 | RNVC: 9

25 Mar 1998

5340-99-431-6958
Clamp

994316958
NO PRIMARY REF 99-431-6958: RNCC: 3 | RNVC: 2
DN0-7670-219: RNCC: 5 | RNVC: 2
88305-304-794: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-968-6595
Lever Bracket

999686595
29558-193: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-99-968-2691
Loop Clamp

999682691
VGS380-41: RNCC: 3 | RNVC: 2
26VC24768: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-888-7077
Buffer

998887077
15/260: RNCC: 3 | RNVC: 2
613884: RNCC: 5 | RNVC: 2
15/0260/03: RNCC: 5 | RNVC: 2
012K8-042: RNCC: 6 | RNVC: 9

2 Oct 2001

5340-99-140-8843
General Purpose Resilient Mount

991408843
SD1-245654: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-280-7435
Mounting Plate

992807435
MDA3132 ISS B: RNCC: 3 | RNVC: 2
MDA3132: RNCC: 5 | RNVC: 1
MDA3132-B: RNCC: 5 | RNVC: 2

10 Mar 2011

5340-99-731-9151
Spring Tension Clip

997319151
AB/1/2/1002: RNCC: 3 | RNVC: 2
MM8395: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-650-7545
Electrical-Mec Post

996507545
SC/A4/33419/1: RNCC: 3 | RNVC: 2
SCA4-33419-1: RNCC: 5 | RNVC: 2
SCA4-33419-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-663-7622
Lever Clamp

996637622
SX/300/SL/001/3: RNCC: 3 | RNVC: 1

29 Jul 1997

5340-99-180-7653
Angle Bracket

991807653
16223: RNCC: 3 | RNVC: 2

18 Sep 2006

5340-99-556-8911
Helical Compression Spring Retainer

995568911
NC16652: RNCC: 3 | RNVC: 2
RVA: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-553-9593
Webbing Strap

995539593
0040B: RNCC: 3 | RNVC: 2
0040B: RNCC: 5 | RNVC: 2

22 Aug 2013

5340-99-611-8605
Electrical-Mechanical Equipment Post

996118605
MBEU43667: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-205-7005
Access Cover

992057005
503075: RNCC: 3 | RNVC: 2

23 Aug 1980

5340-99-643-7652
Electrical-Mec Post

996437652
822854: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-650-4122
Bumper

996504122
5CL: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-645-8047
Electrical-Mec Post

996458047
F202712: RNCC: 3 | RNVC: 2
100F202712: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-126-3611
Stop

991263611
7899186: RNCC: 3 | RNVC: 2

2 Oct 1996

5340-99-714-0105
Dust And Moisture Seal Protective Cover

997140105
7560845: RNCC: 3 | RNVC: 2
Y7560845: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-479-6999
Sealing Plug Assembly

994796999
CH10032: RNCC: 3 | RNVC: 2

1 Nov 2012

5340-99-464-9554
Bracket

994649554
M5755301720000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-262-9581
General Purpose Resilient Mount

992629581
FV2283110: RNCC: 3 | RNVC: 2

2 May 2012

5340-99-467-0788
Loop Clamp

994670788
164113: RNCC: 3 | RNVC: 2
37G12355: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-901-9897

5340-99-956-6531

5340-99-950-6648

5340-99-773-8082
Rubber Bumper

5340-99-790-1426
Clamping Catch

5340-99-910-3298

5340-99-882-1699
Mounting Bracket

5340-99-805-1751

5340-99-770-7384
Electrical-Mec Post

5340-99-805-1742

5340-99-906-8023
Optical Transmi Box

5340-99-775-8250

5340-99-901-6709

5340-99-826-5353

5340-99-776-0626
Dust Cap

5340-99-774-8584

5340-99-773-9347

5340-99-700-4231
Electrical-Mec Post

5340-99-661-1334

5340-99-769-3442
Loop Clamp

5340-99-776-0435

5340-99-775-9394
Cap

5340-99-907-1520
Spring Tension Clip

5340-99-905-4997
Angle Bracket

5340-99-642-5592
Line Supporti Strap

5340-99-124-0728
Dust And Moisture Seal Protective Plug

991240728
SP28005: RNCC: 3 | RNVC: 2
AQ280/E: RNCC: 5 | RNVC: 2
85-25-80-5-4742: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-905-4544
Catch Strike

999054544
2085-00968: RNCC: 3 | RNVC: 2
2085-00968-20-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-417-9547
Mounting Plate

994179547
KS5/83262/00: RNCC: 3 | RNVC: 2
83262: RNCC: 5 | RNVC: 2
81943390009: RNCC: 5 | RNVC: 2

23 Jul 2009

5340-99-460-1304
Escutcheon Plate

994601304
7285/332: RNCC: 3 | RNVC: 2

11 Jun 2004

5340-99-432-7177
Rim Latch

994327177
BS455-L8: RNCC: 2 | RNVC: 2
BS455L8: RNCC: 5 | RNVC: 2
BS455: RNCC: 6 | RNVC: 9
L8: RNCC: 6 | RNVC: 9
G1GA13890: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-562-4635
Loop Clamp

995624635
AS62408: RNCC: 2 | RNVC: 2
XP97PI01045: RNCC: 6 | RNVC: 9

3 Sep 1997

5340-99-742-1704
Mounting Plate

997421704
WR12572: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-99-407-9201
Safety Device

994079201
470 015: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-99-253-3515
Cap

992533515
114-9153: RNCC: 3 | RNVC: 2
114-9153: RNCC: 5 | RNVC: 2

19 Jun 2006

5340-99-226-2790
Loop Clamp

992262790
ACC42485: RNCC: 3 | RNVC: 2

24 May 2013

5340-99-424-1406
Retainer

994241406
8251608411: RNCC: 3 | RNVC: 2
8251608411: RNCC: 5 | RNVC: 2

20 Sep 2010

5340-99-558-8526
Helical Compression Spring Retainer

995588526
ND14896: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-650-8163
Helical Compression Spring Seat

996508163
1212-1244: RNCC: 3 | RNVC: 2
1212-1244: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-736-6108
Swivel Castor

997366108
1483017: RNCC: 3 | RNVC: 2

23 Jan 1986

5340-99-748-0896
Swivel Caster

997480896
26288: RNCC: 3 | RNVC: 2
655RTBSWB: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-748-6781
Loop Clamp

997486781
91013947: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-103-2996
Loop Clamp

991032996
FBS806: RNCC: 3 | RNVC: 2
36BC1511: RNCC: 6 | RNVC: 9
FBS806: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-641-6639
Retaining Strap

996416639
A330835: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-523-3888
Retaining Strap

995233888
FV 2096608: RNCC: 3 | RNVC: 2
FV 2096608: RNCC: 5 | RNVC: 2

17 Mar 1992

5340-99-143-0283
Mounting Bracket

991430283
110028-30965: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-660-6432
Bow Handle

996606432
RRC5662: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-99-192-7847
Butt Hinge

991927847
006840: RNCC: 3 | RNVC: 2
V006840: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-178-1095
Coat And Hat Hook

991781095
11078015: RNCC: 3 | RNVC: 2
VOE11078015: RNCC: 5 | RNVC: 2
CV141923: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-99-226-1196
Mounting Bracket

992261196
02/912757: RNCC: 3 | RNVC: 2

8 Dec 2010

5340-99-906-8070
Mechanic Equipment Hardware Kit

999068070
332/H9125: RNCC: 3 | RNVC: 2
332/H9125: RNCC: 5 | RNVC: 2

4 Oct 2011

5340-99-424-5519
Access Cover

994245519
C220289: RNCC: 3 | RNVC: 2
C220289: RNCC: 5 | RNVC: 9
26FX8945: RNCC: 6 | RNVC: 9
26FX8945: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-550-6600
Loop Clamp

995506600
0180182: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-382-6035
Dust Protective Cap

993826035
77872743: RNCC: 3 | RNVC: 2

31 Jul 1992

5340-99-758-7096
Screw Thread Insert

997587096
ANCHOR RIVET BUSH M3: RNCC: 3 | RNVC: 2
MF505038-4: RNCC: 5 | RNVC: 2

4 Jan 1991

5340-99-623-4916
Clip

996234916
017076: RNCC: 3 | RNVC: 2
017076: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-215-6357
Mounting Bracket

992156357
RRC8410: RNCC: 3 | RNVC: 2
FJ9615L1229: RNCC: 6 | RNVC: 9

31 Jul 1996

5340-99-177-3606
Bracket Assy

991773606
M5745785800000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-148-5250
Mounting Bracket

991485250
MBCS8714: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-99-717-0424
Spacing Threaded Standoff

997170424
P79763: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-895-1040

5340-99-891-7057
Webbing Strap

5340-99-127-9039

5340-99-150-9361

5340-99-601-6745
Rod End Clevis

996016745
6M4FP16867: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-801-2005

5340-99-753-1090
Electrical-Mec Post

5340-99-796-4477

5340-99-766-3970

5340-99-751-9868

5340-99-774-7089
Hinge Bracket

5340-99-660-1869
Butt Hinge

996601869
FV 2094553: RNCC: 3 | RNVC: 2
FV 2094553: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-658-9972
Bail Handle

5340-99-523-1013
Retaining Strap

5340-99-535-7723
Retaining Strap

5340-99-773-3243

5340-99-780-6257

5340-99-788-2825

5340-99-957-7745
Cover Plate

999577745
WG1312-0167-103: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-99-151-6606
Loop Clamp

991516606
095-0913: RNCC: 3 | RNVC: 2
50027834: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-99-461-3020
Access Cover

994613020
WG1381-1971-103: RNCC: 3 | RNVC: 2
XP98PC01074: RNCC: 6 | RNVC: 9

12 Mar 1998

5340-99-756-5159
Rim Latch

997565159
SSN07/M/148/40/1/24: RNCC: 3 | RNVC: 2
M/148/40/1/24: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-606-0126
Du Protective Cover

996060126
NO PRIMARY REF 99-606-0126: RNCC: 3 | RNVC: 2
Y77208414: RNCC: 5 | RNVC: 2
77208414: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-970-4162
Screwed Spacer

999704162
NO PRIMARY REF 99-970-4162: RNCC: 3 | RNVC: 2
03-51944: RNCC: 5 | RNVC: 2
03-51944: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-412-1776
Access Cover

994121776
S4NY-Q-A08: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-99-229-4415
Strap Assembly

992294415
5/23043: RNCC: 3 | RNVC: 2
020Z5-001: RNCC: 6 | RNVC: 9

8 Apr 2002

5340-99-947-6272
Retaining Band

999476272
80-05-46-1335: RNCC: 3 | RNVC: 2
80-05-46-1335: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-839-9411
Access Cover

998399411
FEP-1409-SC/081: RNCC: 3 | RNVC: 2
PA106/7/RH: RNCC: 5 | RNVC: 2
040VW-005: RNCC: 6 | RNVC: 9

17 Mar 2004

5340-99-862-0924
Helical Compression Spring Seat

998620924
509516: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-849-9748
Angle Bracket

998499748
236998: RNCC: 3 | RNVC: 2
LV7RU236998: RNCC: 6 | RNVC: 9
61RV40336: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-956-8803
Retaining Strap

999568803
W4631309: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-861-9531
Mounting Plate

998619531
FV 2029798: RNCC: 3 | RNVC: 2
FV 2029798: RNCC: 5 | RNVC: 2
FV 2029798: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-99-865-6424
Dust And Moisture Seal Protective Cap

998656424
RA065432A: RNCC: 3 | RNVC: 2

14 Aug 2012

5340-99-877-1273
Bracket

998771273
28730190: RNCC: 3 | RNVC: 2

11 Mar 1993

5340-99-881-2309
Brass Hook

998812309
FV334935: RNCC: 3 | RNVC: 2
LV6MT13FV334935: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-866-3557
Retaining Strap

998663557
FV 478070: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-865-2986
Mounting Plate

998652986
40004256: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-99-870-6459
Bumper

998706459
5249363: RNCC: 3 | RNVC: 2

16 May 2011

5340-99-863-1287
Manual Control Handle

998631287
110039-2959: RNCC: 3 | RNVC: 2
XP98PH01004: RNCC: 6 | RNVC: 9

28 Oct 1998

5340-99-957-6355
Section Block Clamp

999576355
FV 2149220: RNCC: 3 | RNVC: 2
FV 2149220: RNCC: 5 | RNVC: 2

29 Aug 1991

5340-99-851-5202
Loop Clamp

998515202
FV 2264102: RNCC: 3 | RNVC: 2
FV 2264102: RNCC: 5 | RNVC: 2

6 Nov 2004

5340-99-864-6642
Channel

998646642
FV2263933: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-99-865-6724
Control Rod

998656724
FV525297: RNCC: 3 | RNVC: 2
LV9ACRFV525297: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-866-3646
Rod End Connector

998663646
FV470762: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-866-9102
Access Cover

998669102
FV525478: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-871-6436
Mounting Plate

998716436
071391: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-99-865-2322
Detent Plunger

998652322
FV141261: RNCC: 3 | RNVC: 2
10FV141261: RNCC: 6 | RNVC: 9
61BU10112: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-865-3425
Engine Accessory Bracket

998653425
FV147780: RNCC: 3 | RNVC: 2
RE24067: RNCC: 5 | RNVC: 2
LV10FV147780: RNCC: 6 | RNVC: 9
61BU10811: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-373-9874
Mounting Bracket

993739874
42208355: RNCC: 3 | RNVC: 2

27 Mar 1998

5340-99-813-0774
Rope Guide Assembly

998130774
20469: RNCC: 3 | RNVC: 2
81423526185: RNCC: 5 | RNVC: 2
EKA20469: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-99-814-1281
Bonding Strip

998141281
M5725059920000: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-99-795-3009
Insert

997953009
ENN51282: RNCC: 3 | RNVC: 2
FV991OQ0083: RNCC: 6 | RNVC: 9

5 Oct 1999

5340-99-260-8862
Access Cover

992608862
AML59314: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-99-480-8190
Multiple Angle Bracket

994808190
45923: RNCC: 3 | RNVC: 2

6 Feb 2007

5340-99-151-9528
Mechanic Equipment Hardware Kit

991519528
FPD35,FWF10,FNN10,FWF13019: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-99-814-1184
General Purpose Access Door

998141184
36863652: RNCC: 3 | RNVC: 2
CV177976: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-99-792-3750
Access Cover

997923750
43887: RNCC: 3 | RNVC: 2

26 Jan 2007

5340-99-865-6714
Control Rod Nut

998656714
FV525145: RNCC: 3 | RNVC: 2
LV9ACRFV525145: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-859-8324
Mounting Plate

998598324
40004257: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-99-957-4096
Tumbler Holder

999574096
263: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-99-865-1586
Buckle

998651586
MBEU171761: RNCC: 3 | RNVC: 2
MBEU171761: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-99-957-6398
Mounting Bracket

999576398
B41855: RNCC: 3 | RNVC: 2
41855: RNCC: 5 | RNVC: 2
41855: RNCC: 5 | RNVC: 2
B41855: RNCC: 5 | RNVC: 2

1 Apr 1992

5340-99-620-4816
Webbing Strap

996204816
SDA247295: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-030-9098
Manual Control Lever

990309098
SST/Y/611/20/E001/103: RNCC: 3 | RNVC: 2
SST/Y/611/20/E001/000/103: RNCC: 5 | RNVC: 2
001295353/103: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-730-5587
Block Clamp

997305587
OD30337: RNCC: 3 | RNVC: 2
ST12004: RNCC: 5 | RNVC: 2
0D 30337: RNCC: 6 | RNVC: 9
1035/22/3: RNCC: 6 | RNVC: 9
ES441B3/MDG25/93: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-562-0350
General Purpose Resilient Mount

995620350
17-1544: RNCC: 3 | RNVC: 2
LM5885: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-734-3520
Access Cover

997343520
MM4051A0A/0010A: RNCC: 3 | RNVC: 2
MM4051A: RNCC: 5 | RNVC: 2
989009078: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-494-2097
Buckle

994942097
23705-198: RNCC: 3 | RNVC: 2

10 May 2011

5340-99-633-9922
Retaining Strap

996339922
A3990-64465: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-422-1390
Screwed Rod

994221390
272-10-1: RNCC: 3 | RNVC: 2
0633-194415: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-166-5468
Mounting Plate

991665468
P-080703-055: RNCC: 3 | RNVC: 2
P080703-055: RNCC: 5 | RNVC: 2

27 Jun 2000

5340-99-657-8843
Ring

996578843
P-721172-001: RNCC: 3 | RNVC: 2
P721172-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-214-3010
Loop Clamp

992143010
402-4-45492-008: RNCC: 3 | RNVC: 2
402-4-4592-108: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-836-1212
Resilient Mount

998361212
13-2005-2: RNCC: 3 | RNVC: 2
13200501/5: RNCC: 5 | RNVC: 2
ACU1185: RNCC: 5 | RNVC: 2
13-2005-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-317-0128
Frame Assembly

993170128
5300-973: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-99-251-0997
Loading Plunger

992510997
BM41788: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-250-2210
Hinge Eye

992502210
1040: RNCC: 3 | RNVC: 2

20 Oct 2010

5340-99-276-1784
Access Cover

992761784
MBEU83155: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-99-628-6794
Wheel Fork

996286794
LM4088: RNCC: 3 | RNVC: 2
SK8080A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-202-2260
Rod End Clevis

992022260
310KLA101: RNCC: 3 | RNVC: 9
KLA101: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-371-1109
Mounting Bracket

993711109
JJ115880: RNCC: 3 | RNVC: 2
022FV-257: RNCC: 6 | RNVC: 9

5 Sep 2002

5340-99-321-5566
Manual Control Handle

993215566
MBEU 92190: RNCC: 3 | RNVC: 2
CMBEU 92190: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-99-606-3844
Nut And Bolt Retainer

996063844
601026344: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-116-3909
Mounting Bracket

991163909
FV 2231865: RNCC: 3 | RNVC: 2
FP982XH0001: RNCC: 6 | RNVC: 9

2 Dec 1998

5340-99-260-9041
Retainer Clip

992609041
POG116493: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-99-577-2857
Section Block Clamp

995772857
FV 2149221: RNCC: 3 | RNVC: 2
FV 2149221: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-99-460-3248
Dust And Moisture Seal Protective Plug

994603248
ADS145K: RNCC: 3 | RNVC: 2
37J426: RNCC: 6 | RNVC: 9
27M9927: RNCC: 6 | RNVC: 9
27M9927: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-212-8881
Loop Clamp

992128881
3311294R1: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-99-638-7755
Nonmetallic Bushing

996387755
3990-67072: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-468-0644
Dust And Moisture Seal Boot

994680644
RWC9813: RNCC: 3 | RNVC: 2
6A9307: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-378-9036
Electronic Equipment Hardware Kit

993789036
563386: RNCC: 3 | RNVC: 2

6 Dec 2001

Load More Results