What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 86 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 86 of 368

5340-99-443-3546

5340-99-443-3802

5340-99-449-5716

5340-99-587-3964
Headless Straight Rod

995873964
ASE03535: RNCC: 3 | RNVC: 2

10 Apr 2012

5340-99-488-9631
Bracket

994889631
M5725841420000: RNCC: 3 | RNVC: 2

11 May 2013

5340-99-269-1656
Mounting Bracket

992691656
JJ115903: RNCC: 3 | RNVC: 2
022FV-286: RNCC: 6 | RNVC: 9

5 Sep 2002

5340-99-404-0137
Mounting Plate

994040137
40001902: RNCC: 3 | RNVC: 2

14 Mar 2011

5340-99-641-9818
Stop Plate

996419818
FV2116254: RNCC: 3 | RNVC: 2
FV 2172371: RNCC: 5 | RNVC: 2
FV 2172371: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-430-1613
Retaining Strap

994301613
8617: RNCC: 3 | RNVC: 2
8617: RNCC: 5 | RNVC: 9
36DE2773: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-603-7166
Angle Bracket

996037166
C272799: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-111-2143
Handle

5340-99-111-1934
Electrical-Mec Post

5340-99-257-3655
Loop Clamp

992573655
OWE205961: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-471-5172
Rod End Clevis

994715172
680535: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-99-657-7770
Mounting Bracket

996577770
JJ102902: RNCC: 3 | RNVC: 2
JJ102902: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-105-5601

5340-99-515-2317
Ventilation Panel

995152317
47573: RNCC: 3 | RNVC: 2

7 Feb 2007

5340-99-269-3923
General Purpose Resilient Mount

992693923
1583-1625: RNCC: 3 | RNVC: 2
CV190169: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-99-215-9951
Mounting Plate

992159951
AS54904: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-99-701-2436
Webbing Strap

997012436
01099: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-99-149-1255
Dust And Moisture Seal Boot

991491255
200453292: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-133-9675
Mounting Bracket

991339675
UG0531141: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-99-660-4346
Angle Bracket

996604346
FV 2161835: RNCC: 3 | RNVC: 2
FV 2161835: RNCC: 5 | RNVC: 2
FV 2161835: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-99-711-7697
Assembly Bracket

997117697
B295663: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-208-1972
Angle Bracket

992081972
FV841013: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-301-2853
Nut And Bolt Locking Plate

993012853
RU 8927: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-99-488-9377
Dust And Moisture Seal Protective Cap

994889377
30764: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-99-144-7081
Nonmetallic Bushing

5340-99-144-0165

5340-99-139-3513

5340-99-453-7167
Stop Plate

994537167
904803-1005-033: RNCC: 3 | RNVC: 2
904803-1005-033: RNCC: 5 | RNVC: 2
WE122C1Y: RNCC: 6 | RNVC: 9

3 Oct 1996

5340-99-143-6596
Spring Tension Clip

991436596
485-002: RNCC: 3 | RNVC: 2
L608: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-212-9818
Helical Compression Spring Seat

992129818
G1-4V06-222-NNAD 599-01: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-99-346-9864
Mounting Plate

993469864
S3S18116040: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-99-722-6357
Mounting Plate

997226357
S3S18139135: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-99-603-4166
Access Cover

996034166
F251842: RNCC: 3 | RNVC: 2
F251842: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-603-1828
Retaining Strap

996031828
C269927-1: RNCC: 3 | RNVC: 2
C269927-1: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-603-7441
Block Fairlead Section

996037441
F281399: RNCC: 3 | RNVC: 2
F281399: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-603-7689
Access Cover

996037689
B283957: RNCC: 3 | RNVC: 2
B283957: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-603-8348
Access Cover

996038348
C.286460: RNCC: 3 | RNVC: 2
C.286460: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-782-7201
Angle Bracket

997827201
CK29000/33: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-075-9277
St Bracket Assembly

990759277
199/A3114/004: RNCC: 3 | RNVC: 2
FG9802P0008: RNCC: 6 | RNVC: 9

27 Feb 1998

5340-99-860-0342
General Purpose Resilient Mount

998600342
NO PRIMARY REF 99-860-0342: RNCC: 3 | RNVC: 2
0125931: RNCC: 5 | RNVC: 2
CV138623: RNCC: 5 | RNVC: 2

22 May 2008

5340-99-798-9349
Turnbuckle Body

997989349
100401-0400-019: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-996-0648
Dust And Moisture Seal Boot

999960648
81DB-7C428-BF: RNCC: 3 | RNVC: 2
6144689: RNCC: 5 | RNVC: 2
FJ970RJ0001: RNCC: 6 | RNVC: 9

8 Sep 1997

5340-99-937-0683
Mounting Bracket

999370683
31690-216: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-99-471-4645
Mounting Bracket

994714645
WG1573-0078-101: RNCC: 3 | RNVC: 2

4 Apr 2009

5340-99-915-7287
Friction Receptacle

999157287
NO PRIMARY REF 99-915-7287: RNCC: 3 | RNVC: 2
A16-48577: RNCC: 5 | RNVC: 2

11 Jun 1979

5340-99-731-1376
Engine Accessory Bracket

997311376
B501463: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-781-1434
Engine Accessory Bracket

997811434
B500046: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-789-5733
Turnbuckle

5340-99-785-3572
Bracket

5340-99-136-6221
Lock Key

5340-99-804-1054
Electrical-Mec Post

5340-99-808-0913

5340-99-804-5405
Retaining Ring

5340-99-788-7717

5340-99-788-8539
Helical Co Retainer

5340-99-804-5705

5340-99-804-7077

5340-99-787-4839

5340-99-147-1790
Dust And Moisture Seal Protective Cap

991471790
12769: RNCC: 3 | RNVC: 2
SR 1024: RNCC: 5 | RNVC: 1
L65147: RNCC: 5 | RNVC: 2
K7115: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-99-870-1753
Mounting Bracket

998701753
45-65-904: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-99-833-0810
Retaining Clip

998330810
7075268: RNCC: 3 | RNVC: 2
LV7BD7075268: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-833-2127
Loop Clamp

998332127
FV472865: RNCC: 3 | RNVC: 2

18 Feb 1991

5340-99-843-0795
Avr Mounting Plate

998430795
130-20822: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-203-0468
Mounting Bracket

992030468
3625273: RNCC: 3 | RNVC: 2
3625273: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-99-477-2864
General Purpose Resilient Mount

994772864
NF2554: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-837-1248
Block Fairlead Section

998371248
40003919: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-99-994-0184
Rigid Caster

999940184
PE13330: RNCC: 3 | RNVC: 2
FH964280015: RNCC: 6 | RNVC: 9

13 Feb 1996

5340-99-837-9641
Support

998379641
Q6944519: RNCC: 3 | RNVC: 2
CV159897: RNCC: 5 | RNVC: 2

8 Mar 2013

5340-99-837-3254
Pot Lid Variable Co

998373254
CED0023: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-99-839-2905
Bracket Assy

998392905
M5725456600100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-836-2096
Mounting Plate

998362096
01010032: RNCC: 3 | RNVC: 2
1952050: RNCC: 5 | RNVC: 1
C01010032: RNCC: 5 | RNVC: 2

3 Mar 1995

5340-99-839-5376
Butt Hinge

998395376
FV 2029410: RNCC: 3 | RNVC: 2
3602: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-976-0167
Metallic Strip

5340-99-977-7286

5340-99-979-1097
Cam Roller

5340-99-977-1759

5340-99-973-3735
Glass Tube

5340-99-970-3475

5340-99-105-1615

5340-99-962-0823

5340-99-962-1890
Hasp Staple

5340-99-119-2324

5340-99-418-7549
Sleeve

994187549
NO PRIMARY REF 99-418-7549: RNCC: 3 | RNVC: 2
UD59945: RNCC: 5 | RNVC: 2
0633-805370: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-229-4567
Mounting Bracket

992294567
667313: RNCC: 3 | RNVC: 2
0308Q-002: RNCC: 6 | RNVC: 9

22 Jan 2003

5340-99-755-8863
Rim Latch

997558863
M6062: RNCC: 3 | RNVC: 2
Y01673603: RNCC: 5 | RNVC: 2
Y016-736-03: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-441-4792
Resilient Mount

994414792
2000E-5K371-C: RNCC: 3 | RNVC: 2
1794435: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-710-1440

5340-99-740-4895
Hinge Bracket

5340-99-913-6801
Retaining Strap

5340-99-870-5847
Angle Bracket

5340-99-870-5801

5340-99-788-1535

5340-99-715-0881
Angle Bracket

5340-99-742-3869

5340-99-661-5649
Hinge Bracket

5340-99-726-8753

5340-99-742-4847
Assembled Retainer

5340-99-742-6684

5340-99-733-3156

5340-99-714-3422
Quick Release Pin

5340-99-737-1483
Retaining Clip

5340-99-733-5314
Angle Bracket

5340-99-730-8880

5340-99-733-8714
Safety Cover Unit

5340-99-733-6108

5340-99-740-6619

5340-99-737-2597

5340-99-736-5452
Retaining Strap

5340-99-714-1589

5340-99-115-2977

5340-99-831-5328
Door Handle

998315328
NKT053: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-99-741-3748
Pipe Retainer

997413748
91037280: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-739-3800
Blank Panel

997393800
40146: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-99-741-6157
Angle Bracket

997416157
JJ112016: RNCC: 3 | RNVC: 2
JJ112016: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-742-5769
Loop Clamp

997425769
S5172 301030: RNCC: 3 | RNVC: 2

18 Apr 1991

5340-99-743-3474
Plate

997433474
S25N226: RNCC: 3 | RNVC: 2
S25N226: RNCC: 5 | RNVC: 9

8 Apr 1992

5340-99-746-4568
Resilient Mount

997464568
10923173: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-738-7674
Access Cover

997387674
36154-5091: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-99-744-8715
Mounting Bracket

997448715
43253012: RNCC: 3 | RNVC: 2
FF952B10005: RNCC: 6 | RNVC: 9

24 Jul 1995

5340-99-743-9564
Expansion Plug

997439564
32417122: RNCC: 3 | RNVC: 2
32417122: RNCC: 5 | RNVC: 2
133657: RNCC: 5 | RNVC: 2
223953: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-831-6585
Angle Bracket

998316585
FV 2081061: RNCC: 3 | RNVC: 2
FV 2081061: RNCC: 5 | RNVC: 2

20 Sep 1994

5340-99-830-3098
Butt Hinge

998303098
DNA5543: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-269-3234
Mounting Bracket

992693234
FV2284059: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-285-8728
Angle Bracket

992858728
FV2283935: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-99-719-0334
Retaining Strap

997190334
3AA8995: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-748-1025
Angle Bracket

997481025
P-891154-010: RNCC: 3 | RNVC: 2
P891154-010: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-701-2126
Core And Bush Assem

997012126
A1A1601160: RNCC: 3 | RNVC: 2
A1A16-01160: RNCC: 5 | RNVC: 2

1 Nov 1991

5340-99-020-5771
Mounting Plate

990205771
P-870083-403: RNCC: 3 | RNVC: 2
P870083-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-803-5216
Loop Clamp

998035216
HD1300-9: RNCC: 3 | RNVC: 2
040180: RNCC: 5 | RNVC: 2
41017604: RNCC: 5 | RNVC: 2
GMA69512: RNCC: 5 | RNVC: 2
910-328-0009: RNCC: 5 | RNVC: 2
226721: RNCC: 5 | RNVC: 2
41017604: RNCC: 6 | RNVC: 9
743-803-5216: RNCC: 6 | RNVC: 9
41017604: RNCC: 6 | RNVC: 9
15400: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-688-1275
Dust And Moisture Seal Protective Plug

996881275
MBEU160623: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-99-668-4711
Rod End Connector

996684711
14.2078NS: RNCC: 3 | RNVC: 2
CV156009: RNCC: 5 | RNVC: 2

25 May 2012

5340-99-454-0439
Control Rod

994540439
MBEU5911: RNCC: 3 | RNVC: 2
AMBEU5911: RNCC: 5 | RNVC: 2
27L2869: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-144-2878
Access Cover

991442878
S25TP127AD: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-215-6027
Mounting Bracket

992156027
CSK 8663: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-99-713-2438
Retaining Strap

997132438
CX179535: RNCC: 3 | RNVC: 2
CX179535: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-998-8915

5340-99-477-4473
Retaining Strap

994774473
90DB-5D220-AA: RNCC: 3 | RNVC: 2
6204111: RNCC: 5 | RNVC: 2

28 Apr 1992

5340-99-770-4962
Dust And Moisture Seal Protective Cap

997704962
WHC DC400A: RNCC: 3 | RNVC: 2
DC400-A: RNCC: 5 | RNVC: 2
WLX003: RNCC: 5 | RNVC: 2
ES233/338/6/106/1: RNCC: 6 | RNVC: 9

14 Mar 1994

5340-99-540-6181
Retaining Clip

995406181
35411-105: RNCC: 3 | RNVC: 2
35411-105-2: RNCC: 5 | RNVC: 2
H474-030295: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-740-9564
Spring Tension Clip

997409564
AR 1 1/4": RNCC: 3 | RNVC: 2
65050/6174: RNCC: 5 | RNVC: 2
A2/65050/6174: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-952-4885
Dust And Moisture Seal Protective Plug

999524885
AGS1229-C: RNCC: 2 | RNVC: 2
B59420: RNCC: 5 | RNVC: 2
AGS1229C: RNCC: 5 | RNVC: 2
28R13699: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-642-3889
Rod End Clevis

996423889
P-250462-001: RNCC: 3 | RNVC: 2
P250462-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-112-5886
Mounting Plate

991125886
B.328283/1: RNCC: 3 | RNVC: 2
B.328283: RNCC: 5 | RNVC: 1

3 Jun 1994

5340-99-434-5186
Mounting Bracket

994345186
WG1412-1209-101: RNCC: 3 | RNVC: 2
105CD-013: RNCC: 6 | RNVC: 9

24 Aug 2010

5340-99-470-8491
Access Cover

994708491
WG1382-9201-105: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-652-1472
Rim Clenching Clamp

996521472
ST44110: RNCC: 1 | RNVC: 2
F500-33: RNCC: 3 | RNVC: 2
SQ30: RNCC: 3 | RNVC: 2
5017501G4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-777-2595
Seal Retaining Plate

997772595
KB571L0566-003: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-440-6386
Stand Base

994406386
WI/11760: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-99-425-6129
Rod End Clevis

994256129
FV3028394: RNCC: 3 | RNVC: 2
BR90/16-61-10-1507: RNCC: 5 | RNVC: 2
FL001JP0067: RNCC: 6 | RNVC: 9

27 Nov 2000

5340-99-159-1815
Webbing Strap

991591815
1050/8113: RNCC: 3 | RNVC: 2
810527: RNCC: 5 | RNVC: 2
UWS-SP-SRM: RNCC: 6 | RNVC: 9

23 Sep 2008

5340-99-705-3628
Carriage

997053628
ID1930/40.60: RNCC: 3 | RNVC: 2

2 Aug 2012

5340-99-145-8545
Retaining Clip

991458545
WD01-47-90062: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-281-4116
Manual Control Handle

992814116
S330607: RNCC: 3 | RNVC: 2
L94070 ITEM 14: RNCC: 5 | RNVC: 2
L94070/14: RNCC: 5 | RNVC: 2
330607: RNCC: 5 | RNVC: 2

30 Nov 2006

5340-99-422-8517
Clamp Sub-Assembly

994228517
S8-94-2150XAC: RNCC: 3 | RNVC: 2
S8-94-2150: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-99-705-3580
Magnet Holder

997053580
33688-216: RNCC: 3 | RNVC: 2

25 Apr 2012

5340-99-108-1376
Rod End Clevis

991081376
WG1388-1863-101: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-99-340-3049
Mounting Bracket

993403049
80036015 ISS 01: RNCC: 3 | RNVC: 2
80036015: RNCC: 5 | RNVC: 1
80036015-01: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-99-330-2364
Slat

993302364
FV2256453: RNCC: 3 | RNVC: 2
0531H-028: RNCC: 6 | RNVC: 9

1 Sep 2005

5340-99-551-5495
Mounting Bracket

995515495
335/07768: RNCC: 3 | RNVC: 2
CV139690: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-99-712-7480
Spring Tension Clip

997127480
AM4606: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-213-4353
Mounting Plate

992134353
FV2306685: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-99-598-7439
Loop Clamp

995987439
FV 2193582: RNCC: 3 | RNVC: 2

21 Jun 1993

5340-99-667-8489
Mounting Plate

996678489
40000883: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-99-476-6813
Mounting Bracket

994766813
3653A056: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-99-544-3380
Rubber Bumper

995443380
BM28144: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-611-9732
Dust And Moisture Seal Protective Plug

996119732
212663: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-631-7205
Bow Handle

996317205
X041DG400067: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-131-5218
Turnbuckle

991315218
ER8899: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-99-459-4887
Plain Solid Disk

994594887
MC6984: RNCC: 3 | RNVC: 2
301928: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-429-4522
Spring Tension Clip

994294522
1280-13: RNCC: 3 | RNVC: 2
625289: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-492-9758
Mounting Bracket

994929758
POG117612: RNCC: 3 | RNVC: 2

13 Apr 2011

5340-99-287-2275
Bumper

992872275
ER9678: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-99-455-3422
Webbing Strap

994553422
80028691: RNCC: 3 | RNVC: 2

28 Oct 2008

5340-99-474-5890
Mortise Latch Set

994745890
070-857: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-142-6216
Synchro Clamp

991426216
SCSHQ 142800 SH.11: RNCC: 3 | RNVC: 2
337A25264: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-448-1636
Lea Spring Assembly

994481636
A93236: RNCC: 3 | RNVC: 2
0264-264055: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-492-9278
Mounting Plate

994929278
FV2227915: RNCC: 3 | RNVC: 2

13 Oct 2006

5340-99-408-9193
Handle Grip

994089193
JB33156: RNCC: 3 | RNVC: 9
61BR40324: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-357-9136
Mounting Plate

993579136
FV2311467: RNCC: 3 | RNVC: 2

18 May 2011

5340-99-591-3591
General Purpose Resilient Mount

995913591
AS62318: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-99-406-1681
Nut And Bolt Locking Plate

994061681
14291: RNCC: 3 | RNVC: 2
114291: RNCC: 5 | RNVC: 2
61DB10373: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-610-9235
Block Fairlead

996109235
13703E60: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-663-7975
Block Clamp

996637975
110087-2957: RNCC: 3 | RNVC: 2

11 Sep 1997

5340-99-646-2405
Tie Bar

996462405
35131282368: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-655-0060
Mounting Bracket

996550060
JJ105338: RNCC: 3 | RNVC: 2
JJ105338: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-500-2660
Side Strip

995002660
6930485: RNCC: 3 | RNVC: 2
FF9530C0058: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-138-0239

5340-99-010-0655
Hanger Base Portion

990100655
EA2920Z561-103: RNCC: 3 | RNVC: 2

28 Feb 1995

5340-99-629-2275
Manual Control Lever

996292275
WG1310-9036-003: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-693-1201
Angle Bracket

996931201
WG1510-0592-102: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-99-618-9421
Retaining Strap

996189421
ASA80500-130: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-369-1195
Mounting Bracket

993691195
236/A1150/173: RNCC: 3 | RNVC: 2

22 Sep 2000

5340-99-977-7288

5340-99-970-2287

5340-99-257-6267

5340-99-363-2493
Roller

5340-99-963-7187
Screw Thread Insert

5340-99-718-8516
Angle Bracket

997188516
RU47060: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-735-2642
Loop Clamp

997352642
FV 1025073: RNCC: 3 | RNVC: 2

16 Jan 1986

5340-99-743-9006
Double Angle Bracket

997439006
MBCS1995: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-99-955-4510

5340-99-955-6343

5340-99-955-0291

5340-99-315-1215
Double Angle Bracket

993151215
FV2289366: RNCC: 3 | RNVC: 2
0724D-008: RNCC: 6 | RNVC: 9

24 Apr 2007

5340-99-490-4794
Loop Clamp

994904794
90016-11659: RNCC: 3 | RNVC: 2

5 May 2010

5340-99-612-0831
Access Cover

996120831
1121E28-562-00-23-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-144-2209
Handle Grip

991442209
100A3-00285: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-388-6360
Mounting Plate

993886360
316-30: RNCC: 3 | RNVC: 2
316-20B ITEM 60: RNCC: 5 | RNVC: 2
316-20B/60: RNCC: 5 | RNVC: 2

23 May 2007

5340-99-543-9965
Retaining Strap

995439965
A3-659404: RNCC: 3 | RNVC: 2
A3-659404: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-667-7570
Mounting Plate

996677570
CHPT-94-54-1962-06: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-99-495-3399
Mounting Bracket

994953399
EA6205G010-131: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-125-7535
Connector Mount

5340-99-087-8924

5340-99-096-4017
Angle Bracket

5340-99-145-4992
Dust Protective Cap

5340-99-096-4685
Lashing Tensioner

5340-99-110-9408

5340-99-111-1223

5340-99-060-4029
Retaining Strap Set

5340-99-725-8254

5340-99-711-1351

5340-99-660-2594
Access Cover Plate

5340-99-421-7660

5340-99-743-6116

5340-99-660-8340

5340-99-659-7627
Butt Hinge Leaf

5340-99-467-4254

5340-99-728-6639

5340-99-663-5010
Blank Panel

5340-99-221-1489
Rim Clenching Clamp

5340-99-220-7676

5340-99-450-2224
Circlip

5340-99-439-5199

5340-99-446-3803

5340-99-462-6336

5340-99-771-5670
Screw Thread Insert

5340-99-661-6382
Mounting Bracket

996616382
02398: RNCC: 3 | RNVC: 2
SD/C253866: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-307-8053
Access Cover

993078053
421-650-006: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-99-145-9746
Filler Opening Cap

991459746
WD01-57-90033-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-192-2981
Bracket

991922981
B508572: RNCC: 3 | RNVC: 2

5 Sep 1991

5340-99-977-4155
Special Clip

999774155
S3S14523034: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-99-648-7972
Threaded End Tensioning Tie Rod

996487972
B178108: RNCC: 3 | RNVC: 2
P-810520-009: RNCC: 5 | RNVC: 2
P810520-009: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-234-2990
Angle Bracket

992342990
FV 2149874: RNCC: 3 | RNVC: 2
FV 2149874: RNCC: 5 | RNVC: 2

18 Mar 1992

5340-99-227-2521
Turnbuckle

992272521
FV2116248: RNCC: 3 | RNVC: 2
FV 2172368: RNCC: 5 | RNVC: 2
FV 2172368: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-075-2964
Pl Modification Kit

990752964
FV2115136: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-99-146-7656
Butt Hinge

991467656
S6120-65165-19: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-335-1783
Access Cover

993351783
GSRS-07-001310-XX: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-99-103-6052
Grooved Clamp Coupling Ferrule

991036052
C11604-14B: RNCC: 3 | RNVC: 2
26NA6289: RNCC: 6 | RNVC: 9
26DK11444: RNCC: 6 | RNVC: 9
26NA6289: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-724-0877
Mounting Bracket

997240877
330E22-9045-0201: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-645-0835
Retaining Strap

996450835
WD5140-00105-103: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-613-1149
Block Clamp

996131149
110087-5343: RNCC: 3 | RNVC: 2
26VC21651: RNCC: 6 | RNVC: 9

15 Jan 2002

5340-99-767-5317
Electrical-Mec Post

997675317
45-1482: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-654-6023
Bumper

996546023
2602-7645-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-522-8530
Resilient Mount

995228530
NO PRIMARY REF 99-522-8530: RNCC: 3 | RNVC: 2
11-454-18-14-2701: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-791-5762
Loop Clamp

997915762
2085-00564: RNCC: 3 | RNVC: 2
2085-00564-20-3: RNCC: 5 | RNVC: 2

22 May 1990

5340-99-785-5058
Webbing Strap

997855058
100850-9000-013: RNCC: 3 | RNVC: 2
SD3: RNCC: 5 | RNVC: 1
915/4/09250/001: RNCC: 5 | RNVC: 2
SD3/1/4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-513-5882
Mounting Bracket

995135882
18323-150: RNCC: 3 | RNVC: 2
0646J-0002: RNCC: 6 | RNVC: 9

12 Sep 2006

5340-99-306-7047
Retaining Strap

993067047
FV 2262817: RNCC: 3 | RNVC: 2
FV 2262817: RNCC: 5 | RNVC: 2

6 Nov 2004

5340-99-946-2447
Plain Solid Disc

5340-99-740-6657
Electrical-Mec Post

5340-99-601-1104
Retaining Strap

996011104
64BFS9921: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-361-2877
Mounting Block Asse

993612877
FV2264817: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-99-668-9250
Double Angle Bracket

996689250
M3625016500000: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-99-115-3499

5340-99-060-3883
Electrical-Mec Post

5340-99-667-9576
Bracket

996679576
M5755475620000: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-99-105-3662

5340-99-115-3727

5340-99-398-7284
Spring Holder

993987284
114312613: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-99-204-2702
Collar

992042702
290133516: RNCC: 3 | RNVC: 2
N1125: RNCC: 6 | RNVC: 9

12 Jul 2000

5340-99-270-8408
Bracket

992708408
M5755182100000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-562-9255
Bracket

995629255
M5745847120100: RNCC: 3 | RNVC: 2

16 Feb 2013

5340-99-527-1931
Extension Drawer Slide

995271931
D642693B: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-661-0346
Synchro Clamp

996610346
FV964477: RNCC: 3 | RNVC: 2
FV964477: RNCC: 5 | RNVC: 2
FV964477: RNCC: 5 | RNVC: 2
FVE11B142PDS: RNCC: 6 | RNVC: 9

8 Mar 1989

5340-99-811-5121
Headles Grooved Rod

998115121
NO PRIMARY REF 99-811-5121: RNCC: 3 | RNVC: 2
36290T: RNCC: 5 | RNVC: 2
LV1VSM36290T: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-900-9235
General Purpose Resilient Mount

999009235
S7-45-485XAA: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-803-2821
Adjustable Support

998032821
V35-1543-50: RNCC: 3 | RNVC: 2
V35-1543-50: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-99-802-5906
Rim Latch

998025906
010661: RNCC: 3 | RNVC: 2
PP1-8A: RNCC: 6 | RNVC: 9
989009948: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-925-0348
Re Locking Assembly

999250348
76516064: RNCC: 3 | RNVC: 2
76516064: RNCC: 5 | RNVC: 2
041BN-010: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-99-908-7809
Spacing Threaded Standoff

999087809
R30-3011102: RNCC: 3 | RNVC: 2
25676162: RNCC: 5 | RNVC: 2

10 Sep 2008

5340-99-930-3191
Double Angle Bracket

999303191
AA-2323-253: RNCC: 3 | RNVC: 2
032A4-004: RNCC: 6 | RNVC: 9

24 Jun 2003

5340-99-897-2812
Bladder

998972812
NO PRIMARY REF 99-897-2812: RNCC: 3 | RNVC: 2
19002100225: RNCC: 5 | RNVC: 2
C583-LWM046129: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-803-2822
Electrical-Mec Post

998032822
V35-1542-50: RNCC: 3 | RNVC: 2
V35-1542-50: RNCC: 5 | RNVC: 2

3 Nov 1988

5340-99-822-3283
Loop Clamp

998223283
Z11-31341: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-430-5748
Spring

994305748
NO PRIMARY REF 99-430-5748: RNCC: 3 | RNVC: 2
Q33110-27: RNCC: 5 | RNVC: 2
88101-100-339: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-881-3269
General Purpose Resilient Mount

998813269
FV533996: RNCC: 3 | RNVC: 2
35171-1002: RNCC: 5 | RNVC: 2
48549: RNCC: 5 | RNVC: 2
LV6MT1SKL48549: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-924-2305
General Purpose Resilient Mount

999242305
NO PRIMARY REF 99-924-2305: RNCC: 3 | RNVC: 2
P0MCD08523: RNCC: 5 | RNVC: 1
0413-2602: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-811-2401
Angle Bracket

998112401
330E52-1125-20: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-99-806-9475
Helical Compression Spring Seat

998069475
2700E-6515: RNCC: 3 | RNVC: 2
1789728: RNCC: 5 | RNVC: 2
47194: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-881-4689
Resilient Mount

998814689
15-1636-01C70: RNCC: 3 | RNVC: 2
100919T: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-113-2689
Retaining Strap

991132689
SK 8079-120: RNCC: 3 | RNVC: 2
8079-120: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-807-1934
Handle

998071934
67-45: RNCC: 3 | RNVC: 2

15 Apr 2003

5340-99-879-5237
Retaining Strap

998795237
70-99-969: RNCC: 3 | RNVC: 2
032YL-004: RNCC: 6 | RNVC: 9

6 Aug 2003

5340-99-872-8216
Commanders Backing

998728216
FV2237007: RNCC: 3 | RNVC: 2
0501J-002: RNCC: 6 | RNVC: 9

10 Feb 2005

5340-99-810-6565
Rod End Connector

998106565
NO PRIMARY REF 99-810-6565: RNCC: 3 | RNVC: 2
2721005: RNCC: 5 | RNVC: 2
272D1005: RNCC: 5 | RNVC: 2

28 Jun 1978

5340-99-870-2009
Swivel Caster

998702009
D3859SFM13-005: RNCC: 3 | RNVC: 2

16 Nov 2010

5340-99-895-1459
Retaining Ring

998951459
NO PRIMARY REF 99-895-1459: RNCC: 3 | RNVC: 2
09128: RNCC: 5 | RNVC: 2
61RV10165: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-196-0898
Plunger Assembly

991960898
4322364: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-99-414-8378
Loop Clamp

994148378
BA79032: RNCC: 3 | RNVC: 2
36VV10225: RNCC: 6 | RNVC: 9
36VV10225: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-795-7250

5340-99-214-3248
Resilient Mount

5340-99-823-7647

5340-99-826-5852
Sh Mounting Bracket

5340-99-796-4117
Protective Cap-Plug

5340-99-826-5622

5340-99-797-4065
Cylinder Cover Boot

5340-99-718-0267
Extens Drawer Slide

5340-99-826-8708

5340-99-625-7898
Over Clamp Assembly

5340-99-213-4638

5340-99-795-6803

5340-99-056-3601
Rod End Clevis

5340-99-214-6835

5340-99-211-3079
Starting Hand Clamp

5340-99-823-3935
Resilient Mount

5340-99-205-0567
Loop Clamp

5340-99-250-5788
Filler Opening Cap

5340-99-211-9789
Retaining Strap

5340-99-253-0191
Detent Plunger

5340-99-717-6502
Electrical-Mec Post

5340-99-797-9593

5340-99-822-5035
Loop Clamp

5340-99-109-3633

5340-99-219-2550
Plate

5340-99-742-9526
Rod End Clevis

997429526
Y3J70631: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-4792
Retaining Strap

998294792
545883: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-2493
Loop Clamp

998262493
FV 799295: RNCC: 3 | RNVC: 2
CV2181: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-902-6518
Mounting Bracket

999026518
E629594A 10A: RNCC: 3 | RNVC: 2
E629594A: RNCC: 5 | RNVC: 1
10A E629594A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-827-2665
Threaded End Tensioning Tie Rod

998272665
41007200: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-825-4298
Nonmetallic Bushing

998254298
40714996: RNCC: 3 | RNVC: 2
714996: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-830-2453
Espagnolette Bolt

998302453
S96VL17: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-829-2469
Rear Backing Plate

998292469
FV692493: RNCC: 3 | RNVC: 2
FV692493: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-148-6433
Angle Bracket

991486433
563082: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-99-203-4706
Detent Plunger

992034706
JF593: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-965-2427
Electrical-Mechanical Equipment Post

999652427
FV754462: RNCC: 3 | RNVC: 2
PG96012: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-878-8269
Dust And Moisture Seal Protective Plug

998788269
MBEU192071: RNCC: 3 | RNVC: 2

1 Feb 2003

5340-99-963-9888
Bumper

999639888
TR79SA: RNCC: 3 | RNVC: 2
N1TR79SA: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-871-6764
Bracket

998716764
M5755472820100: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-870-1235
Dust And Moisture Seal Protective Cover

998701235
KDC6146: RNCC: 3 | RNVC: 2
KDC6146: RNCC: 5 | RNVC: 9

30 Jul 2004

5340-99-963-5652
Access Cover

999635652
MM2139: RNCC: 3 | RNVC: 2
0MM2139: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-877-1359
Retaining Strap

998771359
D2402: RNCC: 3 | RNVC: 2

22 Jul 1994

5340-99-871-5952
Turnbuckle

998715952
AR23015798NS: RNCC: 3 | RNVC: 2
012JJ0011: RNCC: 6 | RNVC: 9

1 Oct 2001

5340-99-881-2004
Spring Tension Clip

998812004
1295: RNCC: 3 | RNVC: 2
LV6MT4FTP1295: RNCC: 6 | RNVC: 9
LV7RU237749: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-863-7183
Mounting Plate

998637183
271451024079: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-99-856-4768
Clamping Catch

998564768
61-658M1 MSZN: RNCC: 3 | RNVC: 2
FV2321269: RNCC: 5 | RNVC: 2

9 Dec 2013

5340-99-898-6051
Access Cover

998986051
FV2269998: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-99-901-7550
Headless Straight Rod

999017550
327391: RNCC: 3 | RNVC: 2
327391: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-901-7832
Spacing Threaded Standoff

999017832
MV1792: RNCC: 3 | RNVC: 2
6AA8513: RNCC: 6 | RNVC: 9
991027928: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-900-9634
Nut And Bolt Locking Plate

999009634
EU10543: RNCC: 3 | RNVC: 2
36SY805: RNCC: 6 | RNVC: 9
36SY805: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-687-2887
Mounting Plate

996872887
14593035: RNCC: 3 | RNVC: 2
CV186011: RNCC: 5 | RNVC: 2
VOE14593035: RNCC: 5 | RNVC: 2

26 May 2011

5340-99-200-4733
Access Cover

992004733
0941118: RNCC: 3 | RNVC: 2

26 May 1987

5340-99-297-9359
Air Inlet-Outlet Frame

992979359
AC185C860: RNCC: 3 | RNVC: 2
50052632: RNCC: 5 | RNVC: 2

26 Feb 2013

5340-99-712-0915
Angle Bracket

997120915
429019: RNCC: 3 | RNVC: 2
R429019: RNCC: 5 | RNVC: 2
36AF1617: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-870-4719
Mounting Bracket

998704719
40004392: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-99-858-2006
Mounting Plate

998582006
QB15653: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-99-880-3539
Loop Clamp

998803539
PD000.281: RNCC: 3 | RNVC: 2
000281: RNCC: 5 | RNVC: 2

24 Feb 2000

5340-99-961-2588
Mounting Bracket

999612588
2EFML31064: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-835-4217
Retaining Strap

5340-99-753-5781
Loop Clamp

5340-99-774-1451
Protection Bellows

5340-99-811-8215
Access Cover

5340-99-774-7342
Access Cover Plate

5340-99-829-7664
Loop Clamp

5340-99-075-5060
Pad Eye

5340-99-127-9677

5340-99-125-8016
Loop Clamp

5340-99-125-1593

5340-99-111-0118
Loop Clamp

5340-99-087-8879
Plate Striker

5340-99-173-0577
Access Cover

5340-99-128-3340

5340-99-087-1016
Electrical-Mec Post

5340-99-150-9495

5340-99-096-3240

5340-99-110-9685
Bow Handle

5340-99-111-0892

5340-99-174-5663

5340-99-128-3729

5340-99-681-5611
Track Stop

996815611
43/524: RNCC: 3 | RNVC: 2
D/43/524: RNCC: 5 | RNVC: 2

21 Feb 2003

5340-99-242-8944
Angle Bracket

992428944
M:T1:79:99: RNCC: 3 | RNVC: 2
M-T1-79-0099: RNCC: 5 | RNVC: 2
022R3-142: RNCC: 6 | RNVC: 9
032PM-180: RNCC: 6 | RNVC: 9
99-168-2089: RNCC: 6 | RNVC: 9

1 Oct 2002

5340-99-768-4842
Turnbuckle Body

997684842
A-441005-001: RNCC: 3 | RNVC: 2
A441005-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-749-8099
Dust And Moisture Seal Protective Cap

997498099
01T-C-12288: RNCC: 3 | RNVC: 2
01TC12288: RNCC: 5 | RNVC: 2
01T-C-12288: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-255-6128
Plug

992556128
343/183: RNCC: 3 | RNVC: 2

4 May 2011

5340-99-798-1105
Mounting Plate

997981105
ST12670/1: RNCC: 3 | RNVC: 2
ST12668/1 ITEM 13: RNCC: 5 | RNVC: 2
ST12668/1/13: RNCC: 5 | RNVC: 2

30 Oct 1998

5340-99-737-4094
Butt Hinge

997374094
SSN.07/W/572/20/4/45: RNCC: 3 | RNVC: 2
001144285: RNCC: 5 | RNVC: 1
W/572/20/4/45: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-432-9351
Loop Clamp

994329351
AGS1661-D: RNCC: 2 | RNVC: 2
RK.14477: RNCC: 5 | RNVC: 2
AGS1661D: RNCC: 5 | RNVC: 2
36AE1550: RNCC: 6 | RNVC: 9
5K115: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-762-4115
Sealing Plug

997624115
PLGM0500010: RNCC: 3 | RNVC: 2
FV1048307/1: RNCC: 5 | RNVC: 2
M-FL-100505-01: RNCC: 5 | RNVC: 2
B90272: RNCC: 5 | RNVC: 2
9FSC: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-493-5459
Access Cover

994935459
420-300-002: RNCC: 3 | RNVC: 2

25 Feb 2011

5340-99-127-2760
Dust And Moisture Seal Protective Plug

991272760
03996: RNCC: 3 | RNVC: 2
POG032801: RNCC: 5 | RNVC: 2
USW3D2A: RNCC: 6 | RNVC: 9

5 Apr 2001

5340-99-551-8498
Manual Control Lever

995518498
4996BV: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-99-902-3850
Wormwheel

999023850
SR1001/5: RNCC: 3 | RNVC: 2
14913-1: RNCC: 6 | RNVC: 9
267-92/15: RNCC: 6 | RNVC: 9

22 Dec 1997

5340-99-320-4563
Bow Handle

993204563
U.C.W.B.1827/19: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-960-1976
Detent Plunger

999601976
FL9339: RNCC: 3 | RNVC: 2
25704-270105-14-0: RNCC: 5 | RNVC: 2
25704-270105-14-0: RNCC: 5 | RNVC: 2
25704-270105.14.0: RNCC: 5 | RNVC: 2
FL9339: RNCC: 5 | RNVC: 2
25704-270105.14.0: RNCC: 5 | RNVC: 2
FL9339: RNCC: 5 | RNVC: 2
N1FL9339: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-858-5735
Angle Bracket

998585735
20817-191: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-99-859-7966
Thrust Control Blan

998597966
NO PRIMARY REF 99-859-7966: RNCC: 3 | RNVC: 2
BLS 181717 ISSB: RNCC: 5 | RNVC: 2
A872-88-300-1820: RNCC: 6 | RNVC: 9

3 Apr 2003

5340-99-651-4811
Angle Bracket

996514811
84-57123: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-662-6858
Balance

996626858
T694-168: RNCC: 3 | RNVC: 2

23 Jun 1995

5340-99-548-4723
Rim Clenching Clamp

995484723
NO PRIMARY REF 99-548-4723: RNCC: 3 | RNVC: 2
M3596H: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-811-0439
Bracket And Plate

998110439
NO PRIMARY REF 99-811-0439: RNCC: 3 | RNVC: 2
A883-88-8830170: RNCC: 6 | RNVC: 9

1 Apr 2003

5340-99-215-3337
Threaded End Tensioning Tie Rod

992153337
IAC-B17029: RNCC: 3 | RNVC: 2
041UP-002: RNCC: 6 | RNVC: 9

22 Jun 2004

5340-99-301-0834
Connect Filter Unit

993010834
NO PRIMARY REF 99-301-0834: RNCC: 3 | RNVC: 2
VA-09-0239-012: RNCC: 5 | RNVC: 9
1718-2000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-840-7466
Mounting Bracket

998407466
100401-5059-ASY: RNCC: 3 | RNVC: 2
100401-5059-ASY: RNCC: 5 | RNVC: 2
A79574: RNCC: 5 | RNVC: 2

15 Nov 2013

Load More Results