What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 81 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 81 of 368

5340-99-384-0769
Angle Bracket

993840769
FV2265220: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-99-551-3654
Cable Harness Sheet

995513654
NO PRIMARY REF 99-551-3654: RNCC: 3 | RNVC: 2
G1Z1829E00: RNCC: 5 | RNVC: 2

28 Mar 2006

5340-99-254-8362
Manual Control Lever

992548362
30123295: RNCC: 3 | RNVC: 2
2015793: RNCC: 5 | RNVC: 2
3001023 PART 22: RNCC: 5 | RNVC: 2
3001023/22: RNCC: 5 | RNVC: 2

31 Oct 2011

5340-99-660-7418
General Purpose Resilient Mount

996607418
271601-0220: RNCC: 3 | RNVC: 2
271601-0220AB: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-99-244-7234
Retaining Clip

992447234
5700-0070: RNCC: 3 | RNVC: 2
5700-0070-MC: RNCC: 5 | RNVC: 2

24 Apr 1995

5340-99-939-3249
Loop Clamp

5340-99-951-2761
Spring Tension Clip

5340-99-668-0161
Block Clamp

996680161
14376002: RNCC: 3 | RNVC: 2
CV182952: RNCC: 5 | RNVC: 2
VOE14376002: RNCC: 5 | RNVC: 2

9 Jun 2011

5340-99-630-2670
Electrical-Mec Post

996302670
048177: RNCC: 3 | RNVC: 2
B048177: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-820-4785
Access Cover

5340-99-647-3806
Rod End Clevis

996473806
P-730627-005: RNCC: 3 | RNVC: 2
P730627-005: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-832-7333
Angle Bracket

998327333
60051-526: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-99-104-6910
General Purpose Resilient Mount

991046910
17/724: RNCC: 3 | RNVC: 2
GP15802: RNCC: 5 | RNVC: 2
GP15802: RNCC: 5 | RNVC: 2
438-332244: RNCC: 6 | RNVC: 9
16Q2919: RNCC: 6 | RNVC: 9
27H2950: RNCC: 6 | RNVC: 9
27H2950: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-328-9649
Rim Lock

993289649
101005-3620 ITEM 20: RNCC: 3 | RNVC: 2
FS2: RNCC: 5 | RNVC: 1
101005-3620/20: RNCC: 5 | RNVC: 2

20 Sep 2007

5340-99-749-7932
Mounting Bracket

997497932
01T-C-13175: RNCC: 3 | RNVC: 2
01TC13175: RNCC: 5 | RNVC: 2
01T-C-13175: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-894-0508
Latch Fork Assembly

998940508
60322-060: RNCC: 3 | RNVC: 2

3 Jun 1991

5340-99-502-2767
Webbing Strap

995022767
FV3028661: RNCC: 3 | RNVC: 2
STAN/95-15-02-1002: RNCC: 5 | RNVC: 2

5 Jun 2007

5340-99-302-1945
Mounting Bracket

993021945
WG1582-0168-101: RNCC: 3 | RNVC: 2

11 Sep 2012

5340-99-796-8198
Spacing Threaded Standoff

997968198
AC20C251/20: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-99-995-6826
Dust And Moisture Seal Protective Cap

999956826
DP100-SS: RNCC: 3 | RNVC: 2
DP100-SS: RNCC: 5 | RNVC: 2

27 May 2009

5340-99-896-4592
Block Clamp

998964592
14386719: RNCC: 3 | RNVC: 2
VOE14386719: RNCC: 5 | RNVC: 2
CV183098: RNCC: 5 | RNVC: 2

10 Jun 2011

5340-99-906-3440
Angle Bracket

999063440
FV 2248086: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-99-832-6375
Manual Control Lever

998326375
7100833: RNCC: 3 | RNVC: 2
LV7BD7100833: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-837-1953
Webbing Strap

998371953
005361: RNCC: 3 | RNVC: 2
41021653: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-8308
Dust And Moisture Seal Protective Cap

998348308
WR10896: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-99-830-6234
Mounting Bracket

998306234
FV814241: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-885-4566
Bracket Assy

998854566
M5755183900100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-895-5001
Spring Tension Clip

998955001
1871838: RNCC: 3 | RNVC: 2
LV6MT8AC1871838: RNCC: 6 | RNVC: 9
16E23083: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-604-4015
Loop Clamp

996044015
STD853-51: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-873-4629
Block Clamp

998734629
EA0705G505-045: RNCC: 3 | RNVC: 2

14 May 2008

5340-99-226-1281
Mounting Bracket

992261281
391-450-051: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-411-9647
Butt Hinge

994119647
BS1227-1945: RNCC: 3 | RNVC: 1
BS1227PTA: RNCC: 4 | RNVC: 1
BS1227-1945: RNCC: 4 | RNVC: 1
04084404: RNCC: 5 | RNVC: 2
0251-442: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-356-4733
Headless Straight Rod

993564733
110652 PART 7933ND: RNCC: 3 | RNVC: 2
110652/7933ND: RNCC: 5 | RNVC: 2
98PF01073: RNCC: 6 | RNVC: 9

8 Jun 1998

5340-99-666-6892
Mounting Rail Assem

996666892
311-100-065: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-99-562-2664
Spacing Threaded Standoff

995622664
PV01546-15A4: RNCC: 3 | RNVC: 2

14 Aug 1991

5340-99-745-0198
Angle Bracket

997450198
WG0081-0750-048: RNCC: 3 | RNVC: 2

12 Feb 1996

5340-99-993-0877
Mounting Bracket

999930877
100401-0400-029: RNCC: 3 | RNVC: 2
L328890: RNCC: 5 | RNVC: 2
100401-0400-029: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-99-993-1047
Mounting Bracket

999931047
WG1542-0501-101: RNCC: 3 | RNVC: 2

13 Feb 2010

5340-99-641-6138
Retaining Strap

996416138
C322538-20: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-976-0613
Bow Handle

999760613
5300-1456: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-99-320-0953
Mounting Bracket

993200953
341A69-6626-20: RNCC: 3 | RNVC: 2

7 Jan 1994

5340-99-540-1752
Dirt And Liquid Deflector

995401752
NO PRIMARY REF 99-540-1752: RNCC: 3 | RNVC: 2
TZ453753: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-745-2904
Bracket

997452904
CK24207: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
H217-220314: RNCC: 6 | RNVC: 9

4 May 1996

5340-99-667-4561
Mounting Bracket

996674561
362-450-012: RNCC: 3 | RNVC: 2
FP180: RNCC: 6 | RNVC: 9

7 Oct 2009

5340-99-244-6943
Angle Bracket

992446943
FV 2032609: RNCC: 3 | RNVC: 2
FV 2032609: RNCC: 5 | RNVC: 2
FV 2032609: RNCC: 5 | RNVC: 2

14 Nov 1994

5340-99-635-2167
Access Cover

996352167
SDC242431: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-103-6650
Fluid Co Filler Cap

991036650
AS3107: RNCC: 2 | RNVC: 2
28J15092: RNCC: 6 | RNVC: 9
28J15092: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-752-0111
Mounting Plate

997520111
EA5303P001-105: RNCC: 3 | RNVC: 2

19 May 2007

5340-99-446-3830
Mounting Bracket

994463830
08011201: RNCC: 3 | RNVC: 2
ED/080/112: RNCC: 5 | RNVC: 2
08011203: RNCC: 5 | RNVC: 2

9 Oct 1995

5340-99-221-0985
Synchro Clamp

992210985
3854/00295: RNCC: 3 | RNVC: 2
A3854/00295: RNCC: 5 | RNVC: 2
3854-00295: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-607-5862
Machine Bracket

996075862
B442303: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-749-8500
Access Cover

997498500
SSN13/M/570/00/21/5: RNCC: 3 | RNVC: 2
001212472: RNCC: 5 | RNVC: 1
M/570/00/21/5: RNCC: 5 | RNVC: 1
SSN13/M/570/00/0021/5: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-727-6962
Protection Bellows

997276962
RB 10039: RNCC: 3 | RNVC: 2
15400335: RNCC: 5 | RNVC: 2
STD/00023572: RNCC: 5 | RNVC: 2
2-0000-13-1/10039: RNCC: 5 | RNVC: 2

24 Oct 2013

5340-99-604-4010
Block Clamp

996044010
F274502-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-535-2894
Loop Clamp

995352894
110642-18781: RNCC: 3 | RNVC: 2
110642-18781: RNCC: 5 | RNVC: 9

30 Apr 1991

5340-99-816-4215
Mounting Plate

998164215
POG124980: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-99-815-7249
Vehicular Seat Bracket

998157249
FV 55517: RNCC: 3 | RNVC: 2
LV9ASCFV55517: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-802-1958
Mounting Bracket

998021958
FV 602640: RNCC: 3 | RNVC: 2
FV 602640: RNCC: 5 | RNVC: 2

24 May 1977

5340-99-401-7399
Retaining Strap

994017399
106816: RNCC: 3 | RNVC: 2
61MD10521: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-471-6671
Handle Kit

994716671
RA065409A: RNCC: 3 | RNVC: 2

14 Aug 2012

5340-99-947-7065
Dust And Moisture Seal Protective Plug

999477065
17-45364: RNCC: 3 | RNVC: 2
17-45364: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-0408
Retaining Band

998150408
FV314256: RNCC: 3 | RNVC: 2
LV9AHYFV314256: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-802-3529
Dust And Moisture Seal Protective Cap

998023529
RE24008: RNCC: 3 | RNVC: 2
FV147699: RNCC: 5 | RNVC: 2
6MT179632: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-815-6322
Latch Bar

998156322
FV 51831: RNCC: 3 | RNVC: 2
LV9ASCFV51831: RNCC: 5 | RNVC: 2
9ASCFV51831: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-814-7924
Hose Retainer

998147924
CH55212: RNCC: 3 | RNVC: 2
6321571: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-7121
Manual Control Lever

998157121
FV 58186: RNCC: 3 | RNVC: 2
LV9ASCFV58186: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-817-2941
Webbing Strap

998172941
950.16.01.106: RNCC: 3 | RNVC: 2

20 May 1991

5340-99-819-9739
Locking Boss

998199739
11739-18: RNCC: 3 | RNVC: 2

8 Jun 2012

5340-99-826-0747
Mounting Plate

998260747
FV848315: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-0742
Mounting Plate

998260742
FV862751: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-5158
Retaining Strap

998265158
CV2664: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-816-5441
Mounting Plate

998165441
POG090883: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-820-9854
Plate

998209854
FV473517: RNCC: 3 | RNVC: 2
FV473517: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-466-4258
Swivel Castor

994664258
LMN5010: RNCC: 3 | RNVC: 2
4D2971: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-963-4135
Handwheel

999634135
MM54SA: RNCC: 3 | RNVC: 2
0MM54SA: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-815-4283
Headless Grooved Rod

998154283
FV 382811: RNCC: 3 | RNVC: 2
LV9AHYFV382811: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-419-9949
Access Cover

994199949
BR24888: RNCC: 3 | RNVC: 2
36VV17399: RNCC: 6 | RNVC: 9

23 Oct 1979

5340-99-815-6011
Control Rod

998156011
571666: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-718-2063
Electrical-Mec Post

5340-99-248-4808
Mounting Bracket

992484808
EU5310B504-041: RNCC: 3 | RNVC: 2

26 Jul 2008

5340-99-789-6194
Clamping Catch

997896194
V18L01-1Y1AA: RNCC: 3 | RNVC: 2
06476-010: RNCC: 6 | RNVC: 9
064CV-005: RNCC: 6 | RNVC: 9

13 Sep 2006

5340-99-386-8425
Roof Clip

993868425
HLBR-1012: RNCC: 3 | RNVC: 2

9 May 2011

5340-99-459-6116
Block Clamp

994596116
25-2NF29: RNCC: 3 | RNVC: 2
26TD5095: RNCC: 6 | RNVC: 9
26TD5095: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-799-0444
Hinge

997990444
NO PRIMARY REF 99-799-0444: RNCC: 3 | RNVC: 2
ZP20281: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-781-3774
Lock Bolt

997813774
904801-3900-008: RNCC: 3 | RNVC: 2
44472-303: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-648-2094
Retaining Strap

996482094
3892-76260: RNCC: 3 | RNVC: 2
B3892-76260: RNCC: 5 | RNVC: 2
3892-76260: RNCC: 5 | RNVC: 9
B3892-76260: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-102-8312
Access Cover Plate

991028312
NO PRIMARY REF 99-102-8312: RNCC: 3 | RNVC: 2
37-516-204-02: RNCC: 5 | RNVC: 2

7 Nov 1978

5340-99-826-6105
Retaining Strap

998266105
FV.897450: RNCC: 3 | RNVC: 2
FV.897450: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-213-0935
Handle Grip

992130935
60420002: RNCC: 3 | RNVC: 2
60420002: RNCC: 5 | RNVC: 2
60000111: RNCC: 5 | RNVC: 9

6 Sep 2007

5340-99-837-7973
Mounting Plate

998377973
0409DET02A: RNCC: 3 | RNVC: 2

22 Jan 2013

5340-99-837-0839
Bracket

998370839
M5755459620000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-961-7907
Detent Plunger

999617907
MG1305: RNCC: 3 | RNVC: 2
C1MG1305: RNCC: 6 | RNVC: 9
7A2645: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-718-2535
Angle Bracket

997182535
19342-6: RNCC: 3 | RNVC: 2
E19342-6: RNCC: 5 | RNVC: 2

18 Apr 1979

5340-99-593-9011
Mounting Plate

995939011
FV2299245: RNCC: 3 | RNVC: 2

8 Mar 2011

5340-99-075-0228
Clip

990750228
27602: RNCC: 3 | RNVC: 2
4A-5429: RNCC: 6 | RNVC: 9
FX-075-0228: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-772-1452
Quick Release Plunger

997721452
606-2008: RNCC: 3 | RNVC: 2
FV 2207748: RNCC: 5 | RNVC: 2

30 Apr 1997

5340-99-645-9656
Electrical-Mec Post

996459656
A65050-1054: RNCC: 3 | RNVC: 2
65050-1054: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-340-2682
Mounting Bracket

993402682
123/05881: RNCC: 3 | RNVC: 2

28 Mar 2003

5340-99-471-3811
Bracket

994713811
NO PRIMARY REF 99-471-3811: RNCC: 3 | RNVC: 2
G1Z2231E00-05: RNCC: 5 | RNVC: 2

2 May 2006

5340-99-338-8121
Angle Bracket

993388121
FV2214420: RNCC: 3 | RNVC: 2

28 Feb 1997

5340-99-206-3022

5340-99-122-6844

5340-99-204-7358

5340-99-720-7954
Electrical-Mec Post

5340-99-117-9328

5340-99-339-4642
Lock Plate

5340-99-339-4662
Turnbuckle

5340-99-526-1794

5340-99-477-4224
Butt Hinge Leaf

5340-99-517-2665
Loop Clamp

5340-99-520-7150
Extens Drawer Slide

5340-99-418-8784

5340-99-457-0689

5340-99-206-5340
Retaining Strap

5340-99-412-6640

5340-99-424-2282
Access Cover

994242282
C188863: RNCC: 3 | RNVC: 2
C188863: RNCC: 5 | RNVC: 9
26FX718: RNCC: 6 | RNVC: 9
26FX718: RNCC: 6 | RNVC: 9

15 Oct 1979

5340-99-402-6236
Dust And Moisture Seal Protective Cap

994026236
MC3000: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-99-447-0369
Cover

994470369
82010664: RNCC: 3 | RNVC: 2

14 May 2004

5340-99-251-3249
Webbing Strap

992513249
FV2065865: RNCC: 3 | RNVC: 2

12 Jul 1989

5340-99-460-7887
Rod End Connector

994607887
AC031241: RNCC: 3 | RNVC: 2
27WW957: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-160-4335
Mounting Plate

991604335
00-1097-1274: RNCC: 3 | RNVC: 2
FF962TC0008: RNCC: 6 | RNVC: 9

11 Sep 1996

5340-99-737-2577
Air Inlet-Outlet Frame

997372577
AMZNO NSTD: RNCC: 3 | RNVC: 2
TT8880737: RNCC: 6 | RNVC: 9

3 Jul 2009

5340-99-737-7084
Spacer

997377084
PG1015: RNCC: 3 | RNVC: 2
1343-3620: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-131-4397
Retaining Strap

991314397
MBEU177137: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-99-225-9113
Double Angle Bracket

992259113
MBCS4647: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-99-728-2038
Mounting Bracket

997282038
2EFML66468: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-446-6158
Retaining Strap

994466158
90519602: RNCC: 3 | RNVC: 2
61RV41228: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-346-4280
Access Cover

993464280
MBEU171567: RNCC: 3 | RNVC: 2
MBEU171567: RNCC: 5 | RNVC: 2

3 Jul 2002

5340-99-750-1166
Mending Plate

997501166
FV2269643: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-99-759-2668
Dust And Moisture Seal Protective Cover

997592668
2130227-1-405: RNCC: 3 | RNVC: 2
AEG2130227-1-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-730-5234
Anti Screw Assembly

997305234
805341/101: RNCC: 3 | RNVC: 2
B805341/101: RNCC: 5 | RNVC: 2
866AK1681: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-750-4719
Boot

997504719
331/33723: RNCC: 3 | RNVC: 2
23/55888: RNCC: 6 | RNVC: 9

30 Apr 2012

5340-99-219-6930
Mounting Bracket

992196930
S14-94-1435XAA: RNCC: 3 | RNVC: 2
S14-94-1435XAA: RNCC: 5 | RNVC: 2

21 Sep 2006

5340-99-417-0225
Fork End

994170225
NO PRIMARY REF 99-417-0225: RNCC: 3 | RNVC: 2
11020Y067: RNCC: 5 | RNVC: 9
27Q18645: RNCC: 6 | RNVC: 9

2 Nov 1979

5340-99-586-4493
Access Cover

995864493
71/843/22: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-99-198-8761
Loop Clamp

991988761
64-31775: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-739-7828
Mounting Bracket

997397828
KB956K0137-203S: RNCC: 3 | RNVC: 2
KB956K0137-203: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-957-1466
Bumper

999571466
AC1400-4: RNCC: 3 | RNVC: 2
AC1400-4: RNCC: 5 | RNVC: 2
R30-9921-50: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-327-4665
Bow Handle

993274665
OE-B-14226: RNCC: 3 | RNVC: 2

24 Aug 2012

5340-99-535-1911
Retaining Strap

995351911
16YJ 32194: RNCC: 3 | RNVC: 2
16YJ 32194/3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-151-4094
Mounting Bracket

991514094
DA766/002: RNCC: 3 | RNVC: 2
MOD/A/766/002: RNCC: 5 | RNVC: 2

8 Oct 2009

5340-99-796-5440
Access Cover

997965440
ERC3815: RNCC: 3 | RNVC: 2
E/ERC3815: RNCC: 6 | RNVC: 9

25 Sep 1985

5340-99-376-4094
Clamp

993764094
SSK/M/510/60/0019/004: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-99-722-8849
Dust And Moisture Seal Protective Cap

997228849
MBEU-70903: RNCC: 3 | RNVC: 2
B/MBEU-70903: RNCC: 5 | RNVC: 2
MBEU-70903: RNCC: 5 | RNVC: 2
MBEU70903: RNCC: 5 | RNVC: 2
B/MBEU-70903: RNCC: 5 | RNVC: 2
MBEU70903: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-728-7810
Manual Control Lever

997287810
WW 400 164-U: RNCC: 3 | RNVC: 2
204GK25U13: RNCC: 5 | RNVC: 2
WW KAA 500,POS.6: RNCC: 5 | RNVC: 2
WW KAA 500/6: RNCC: 5 | RNVC: 2
WW KAA 500: RNCC: 6 | RNVC: 9
WE111B31: RNCC: 6 | RNVC: 9

16 Apr 1996

5340-99-760-7597
Mounting Bracket

997607597
SSN07/M/615/00/2/1: RNCC: 3 | RNVC: 2
M/615/00/2/1: RNCC: 5 | RNVC: 1
M/615/00/2/201: RNCC: 5 | RNVC: 1
SSN13/M/615/00/2/201: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-250-1603
Stowage Hook

992501603
227939: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

23 Feb 2005

5340-99-377-5551
Access Cover

993775551
FV2271478: RNCC: 3 | RNVC: 2

10 May 2007

5340-99-131-7896
Access Cover

991317896
36632-369: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-99-551-6480
Dust And Moisture Seal Protective Cap-Plug

995516480
3001S03386: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-99-652-3444
Electrical-Mec Post

996523444
CMP1007: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-649-7312
Electrical-Mec Post

996497312
CMP1019: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-572-6178
Roller

995726178
6930466: RNCC: 3 | RNVC: 2
FF9530C0082: RNCC: 6 | RNVC: 9

10 May 1995

5340-99-313-3934
Hand Carrying Strap Assembly

993133934
Z4M9025ZB: RNCC: 3 | RNVC: 2

5 May 2000

5340-99-201-4511
Retaining Strap

992014511
20078: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-020-7927
Strap

990207927
FV 2126369: RNCC: 3 | RNVC: 2

11 Feb 1997

5340-99-502-3177
Mounting Bracket

995023177
6012: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-99-343-1732
Mounting Plate

993431732
FV2300024: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-250-2388
Strap

992502388
B091519: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-99-533-9006
Dust And Moisture Seal Protective Cap-Plug

995339006
95AB-A22642-AAW: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-99-154-3188
Mounting Plate

991543188
MBEU161958: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-99-710-8914
General Purpose Resilient Mount

997108914
3P906119: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-536-1830
Nut And Bolt Locking Plate

995361830
RPH46165: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-710-8945
Toggle Lever Catch

997108945
30-521: RNCC: 3 | RNVC: 2
8827125: RNCC: 5 | RNVC: 2
0930SS: RNCC: 5 | RNVC: 2
B10027: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-551-8713
Mounting Plate

995518713
FV2293454: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-99-710-2071

5340-99-720-2886
Access Door

5340-99-732-0086

5340-99-874-1184

5340-99-917-1400
Handhole Cla Bridge

5340-99-851-1431
Mounting Bracket

5340-99-866-4839

5340-99-954-6479

5340-99-125-3211
Access Cover

991253211
CFT24866: RNCC: 3 | RNVC: 2

25 May 1999

5340-99-720-1657
Hinge Bracket

5340-99-721-5012
Clamping Catch

5340-99-708-9788
Butt Hinge

5340-99-702-4780
Bush Spindle

5340-99-721-1924

5340-99-710-5963

5340-99-715-1988

5340-99-710-5870
Dust Protective Cap

5340-99-108-9876
Spring Tension Clip

5340-99-251-6660
Quick Release Pin

5340-99-710-1694

5340-99-233-1273
Mechanic Equipment Hardware Kit

992331273
61406052-AA-001: RNCC: 3 | RNVC: 2
UWSTUS5A: RNCC: 6 | RNVC: 9

12 Aug 2005

5340-99-248-4531
Headless Straight Rod

992484531
FV2256477: RNCC: 3 | RNVC: 2
0531H-031: RNCC: 6 | RNVC: 9

1 Sep 2005

5340-99-301-7582
Double Angle Bracket

993017582
P-881216-003: RNCC: 3 | RNVC: 2
P881216-003: RNCC: 5 | RNVC: 2

2 Oct 1996

5340-99-643-1445
Electrical-Mec Post

996431445
33728-00926: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-930-4575
Slip

999304575
EME70585-358-119: RNCC: 3 | RNVC: 2
TORNADO-9218: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-702-6934
Loop Clamp

997026934
6.373-221.0: RNCC: 3 | RNVC: 2

11 Oct 2012

5340-99-120-1355
Split Tubular Clip

991201355
SCL1689-17-2-5: RNCC: 3 | RNVC: 2
LP739896: RNCC: 5 | RNVC: 2
10H20911: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-451-4626
Handle

994514626
NO PRIMARY REF 99-451-4626: RNCC: 3 | RNVC: 2
20-136-1: RNCC: 5 | RNVC: 2
Z4WY1351: RNCC: 6 | RNVC: 9

25 Apr 1977

5340-99-750-2475
Mounting Bracket

997502475
PT6036-4-702333: RNCC: 3 | RNVC: 2
640/2/23931: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-853-6894
Buckle

998536894
D8034: RNCC: 3 | RNVC: 2
WE128B2: RNCC: 6 | RNVC: 9

5 Mar 1998

5340-99-254-7691
Mounting Plate

992547691
80015016 ISS 02: RNCC: 3 | RNVC: 2
80015016: RNCC: 5 | RNVC: 2
80015016-02: RNCC: 5 | RNVC: 2

14 Mar 2011

5340-99-856-4194
Metal Grille

998564194
A2N25037215: RNCC: 3 | RNVC: 2
25037215: RNCC: 5 | RNVC: 2

2 Apr 2008

5340-99-897-3027
Retaining Strap

998973027
E.W.SS4: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-99-835-5442
Tow Adapter

998355442
EKA20867: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-99-667-0246
Mounting Plate

996670246
EA6205G595-103: RNCC: 3 | RNVC: 2

5 Mar 2008

5340-99-144-1060

5340-99-831-1793
General Purpose Resilient Mount

998311793
TG2616013Q: RNCC: 3 | RNVC: 2
TG616013: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-634-2396

5340-99-632-9359

5340-99-632-9370

5340-99-635-6048
Electrical-Mec Post

5340-99-838-8152
Plate Spacer

998388152
11435031: RNCC: 3 | RNVC: 2
0435031: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-1654
Mounting Bracket

998341654
FV769646: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-351-4017
Spring Tension Clip

993514017
110142/26541: RNCC: 3 | RNVC: 2
26VC-4371: RNCC: 6 | RNVC: 9

22 Mar 2002

5340-99-836-9253
Latch Bar

998369253
ASE02636: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-99-838-5789
Retaining Strap

998385789
MB.3001: RNCC: 3 | RNVC: 2
MB3002P: RNCC: 5 | RNVC: 2
900017: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-429-5590
Mounting Bracket

994295590
5291233: RNCC: 3 | RNVC: 2

13 May 2011

5340-99-635-9749

5340-99-848-1171
Rim Lock

998481171
018 264: RNCC: 3 | RNVC: 2
FO9911L0244: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-99-838-5694
Rim Latch

998385694
FV770817: RNCC: 3 | RNVC: 2

20 Nov 1981

5340-99-947-8289
Spring Tension Clip

999478289
100-5-8: RNCC: 3 | RNVC: 1
RRA837051: RNCC: 5 | RNVC: 1
RRA837051: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-838-3326
Synchro Clamp

998383326
TH42NK073MB: RNCC: 3 | RNVC: 2
0029978090: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-838-9742
Plug And Chain Asse

998389742
FV932579: RNCC: 3 | RNVC: 2

10 Oct 1982

5340-99-550-4073
Grooved Cla Ferrule

5340-99-826-2454
Loop Clamp

998262454
FV 801965: RNCC: 3 | RNVC: 2
CV.1965: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-848-9413
Retaining Band

998489413
FV109109E: RNCC: 3 | RNVC: 2
61ZA40342: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-844-9595
Spring Tension Clip

998449595
508035: RNCC: 3 | RNVC: 2
90508035: RNCC: 5 | RNVC: 2
LV7RU508035: RNCC: 6 | RNVC: 9
(241)AE095508035: RNCC: 8 | RNVC: 2
508035: RNCC: 8 | RNVC: 2

25 Apr 1991

5340-99-225-8917
Mounting Bracket

992258917
42213398: RNCC: 3 | RNVC: 2

12 Dec 2004

5340-99-923-8187
General Purpose Resilient Mount

999238187
JE10412: RNCC: 3 | RNVC: 2
1EA18756: RNCC: 5 | RNVC: 2
954-1325: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-230-9321
Half Hinge

992309321
EU5341C703-101: RNCC: 3 | RNVC: 2

7 Jun 2008

5340-99-244-7370
Rod End Clevis

992447370
EA6700Z533-101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-99-244-7530
Angle Bracket

992447530
22998-193: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-99-720-2549
Inb Restraint Plate

997202549
SSN09/Y/547/M01/019: RNCC: 3 | RNVC: 2
Y/547/M01/019: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-665-6983
T Bracket

996656983
WG1311-0053-10101: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-99-742-9480
Loop Clamp

997429480
65050/4932: RNCC: 1 | RNVC: 2
NX6: RNCC: 3 | RNVC: 2
A2/65050/4932: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-428-4672
Mounting Plate

994284672
AB/1/9/3013: RNCC: 3 | RNVC: 2
MM7994: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-99-670-4829
Spacing Threaded Standoff

996704829
NO PRIMARY REF 99-670-4829: RNCC: 3 | RNVC: 2
222-430: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-99-131-1220
Loop Clamp

991311220
FV 2193657: RNCC: 3 | RNVC: 2
FV2186335 ITEM 12: RNCC: 5 | RNVC: 2
FV2186335/12: RNCC: 5 | RNVC: 2

1 Mar 1995

5340-99-562-7865
Gland

995627865
SR0488/6: RNCC: 3 | RNVC: 2
W120/2: RNCC: 6 | RNVC: 9
0047-95/11: RNCC: 6 | RNVC: 9

17 Jun 1997

5340-99-846-2139
Plate

998462139
M33 5102 20: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
H853-264424: RNCC: 6 | RNVC: 9
N102-264424: RNCC: 6 | RNVC: 9

21 Dec 1996

5340-99-827-5943
Loop Clamp

998275943
3000-0300S20: RNCC: 3 | RNVC: 2
41014693: RNCC: 5 | RNVC: 2

11 Feb 1991

5340-99-648-7849
Helical Compression Spring Seat

996487849
2126-6775-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-867-8504
Double Angle Bracket

998678504
17024-150: RNCC: 3 | RNVC: 2

12 Apr 2006

5340-99-228-3710
Access Cover

992283710
EB8-81-3091: RNCC: 3 | RNVC: 2
26FZ-30177: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-837-1751
Mounting Bracket

998371751
WG1573-0379-101: RNCC: 3 | RNVC: 2

23 Nov 2011

5340-99-135-5339
Quick Release Pin

991355339
NO PRIMARY REF 99-135-5339: RNCC: 3 | RNVC: 2
11-454-18-11-10743: RNCC: 5 | RNVC: 2
Z405-04: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-668-3037
Strap Hinge

996683037
NO PRIMARY REF 99-668-3037: RNCC: 3 | RNVC: 2
CV191388: RNCC: 5 | RNVC: 2
5796: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-99-957-9688
Clip

999579688
NO PRIMARY REF 99-957-9688: RNCC: 3 | RNVC: 2
180108: RNCC: 5 | RNVC: 2
B151-TT4448816: RNCC: 6 | RNVC: 9

8 Dec 2003

5340-99-546-0234
Access Cover

995460234
CFD 611: RNCC: 3 | RNVC: 2
H420-091296: RNCC: 6 | RNVC: 9
FD611: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-316-7012
Loop Clamp

993167012
601-25: RNCC: 3 | RNVC: 2
601-25: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-99-354-0780
Mounting Plate

993540780
32861: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-99-277-1942
Fuel Tank Strap Set

992771942
741579: RNCC: 3 | RNVC: 2
DRG 07352: RNCC: 5 | RNVC: 2

23 Aug 2002

5340-99-197-5518

5340-99-551-4761
Loop Clamp

995514761
FV 2261285: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-99-321-1117
Dust And Moisture Seal Protective Cap

993211117
MBEU187793: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-99-839-0316

5340-99-839-2513

5340-99-305-7143
Dust And Moisture Seal Protective Cap

993057143
CBD20257P10: RNCC: 3 | RNVC: 2

24 May 2005

5340-99-446-4123
Retaining Strap

994464123
21033B: RNCC: 3 | RNVC: 2
Y1YA1533: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-400-2489
Blanking Plug

994002489
112 4146 01: RNCC: 3 | RNVC: 2

4 May 2011

5340-99-830-8211
Angle Bracket

5340-99-208-0702
Resilient Mount

5340-99-805-9655
Electrical-Mec Post

5340-99-256-8124
Plain Solid Disc

5340-99-773-3139

5340-99-465-0899

5340-99-361-7505
Loop Clamp

5340-99-771-8096
Catch Assembly

5340-99-120-1304

5340-99-500-2066
Mounting Bracket

5340-99-193-8541

5340-99-783-4949
Clamping Catch

5340-99-386-6306
Luggage Handle

5340-99-772-5888

5340-99-716-4293
Loop Clamp

997164293
HP2N: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-509-7286
Dashpot Piston

995097286
290/00808: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-99-126-9634
Mounting Clamp Asse

991269634
KB538K0866-066: RNCC: 3 | RNVC: 2
0027V0004: RNCC: 6 | RNVC: 9

26 Oct 2000

5340-99-749-8077
Dust And Moisture Seal Protective Cap

997498077
01T-C-12233: RNCC: 3 | RNVC: 2
01TC12233: RNCC: 5 | RNVC: 2
01T-C-12233: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-878-8231
Angle Bracket

998788231
WG1313-0532-103: RNCC: 3 | RNVC: 2

19 Jun 2002

5340-99-806-6469
Loop Clamp

998066469
NN15211G01: RNCC: 3 | RNVC: 2
0434W-026: RNCC: 6 | RNVC: 9

22 Jun 2002

5340-99-873-4740
Mounting Plate

998734740
EU5332B046-111: RNCC: 3 | RNVC: 2

29 Aug 2008

5340-99-365-6023
Mounting Bracket

993656023
AMP 02 03 25008: RNCC: 3 | RNVC: 2
60200225: RNCC: 5 | RNVC: 2

16 Jan 2006

5340-99-397-4687
Mounting Plate

993974687
PE33958: RNCC: 3 | RNVC: 2

29 Jun 2012

5340-99-652-6539
Double Angle Bracket

996526539
834335: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-547-9567
Clamping Strip

995479567
FV 2170939: RNCC: 3 | RNVC: 2
FV 2170939: RNCC: 5 | RNVC: 2

28 Jul 1995

5340-99-460-6735
Rod End Clevis

994606735
65-84-1589: RNCC: 3 | RNVC: 2
27SG130: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-651-1497
Quick Release Pin

996511497
MDS0082S06-50G: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-717-0430
Retaining Strap

997170430
WD5073-00006-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-127-4864
Mounting Plate

991274864
WG1310-1029-101: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-99-826-7836
Packing Piece

998267836
FV725901: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-3133
Line Supporting Strap

998273133
9179191: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-172-9019
Access Door

5340-99-423-5220
Torpedo Spring

5340-99-996-0224
Retaining Strap

999960224
NRC8404: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-99-194-4935

5340-99-265-1274
Block Clamp

992651274
HU24179: RNCC: 3 | RNVC: 2

3 Oct 2003

5340-99-423-0403

5340-99-929-1984
Runner

999291984
AML59048: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-99-826-2455
Loop Clamp

998262455
FV 801966: RNCC: 3 | RNVC: 2
CV.1966: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-701-1348
Spring Loaded Cylinder Fastener

997011348
29-1700/SS: RNCC: 3 | RNVC: 2
ORC-19-110: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-99-443-1334
Mounting Plate

994431334
BTT3-0196-000-000: RNCC: 3 | RNVC: 2

18 Sep 2012

5340-99-718-3285
Quick Release Pin

997183285
MB500-85: RNCC: 3 | RNVC: 2
MB500-85: RNCC: 5 | RNVC: 2
AMB500-85: RNCC: 5 | RNVC: 2
AMB500-85: RNCC: 5 | RNVC: 2

7 Jun 1980

5340-99-405-4048
Plug Drain

994054048
NO PRIMARY REF 99-405-4048: RNCC: 3 | RNVC: 2
2F4257: RNCC: 5 | RNVC: 2
61AU40969: RNCC: 6 | RNVC: 9

25 Mar 1981

5340-99-910-8729
Webbing Strap

999108729
NO PRIMARY REF 99-910-8729: RNCC: 3 | RNVC: 2
5300-102: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-99-364-1074
Mounting Bracket

993641074
307468B: RNCC: 3 | RNVC: 2
P63-900-938: RNCC: 5 | RNVC: 2
P63-900-938: RNCC: 5 | RNVC: 2

30 Nov 2011

5340-99-710-7569
Angle Bracket

997107569
341-106: RNCC: 3 | RNVC: 2

25 Aug 1978

5340-99-382-4114
Corrosion Preventive Anode

993824114
SST/M/441/00/0001/000/004 ISS 04: RNCC: 3 | RNVC: 2
001303571 SH 4 ISS 4: RNCC: 5 | RNVC: 2
001303571/004 ISS 04: RNCC: 5 | RNVC: 2
SST/M/441/00/0001/000 SH 4 ISS 4: RNCC: 5 | RNVC: 2
MLS4A1A: RNCC: 6 | RNVC: 9
TAF686/02: RNCC: 6 | RNVC: 9

19 Feb 2002

5340-99-406-9020
Loop Clamp

994069020
4-207: RNCC: 3 | RNVC: 2
X3XCAL4-207: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-144-3901
Helical Compression Spring Retainer

991443901
BM30063: RNCC: 3 | RNVC: 2
M/615/05/5003: RNCC: 5 | RNVC: 1
001303737: RNCC: 5 | RNVC: 1
SST/M/615/05/5003: RNCC: 5 | RNVC: 1
EM42637 ITEM 6: RNCC: 5 | RNVC: 2

28 Jun 1991

5340-99-638-5786
Electrical-Mec Post

996385786
SDA219608-1: RNCC: 3 | RNVC: 2
640-2-14589-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-439-9395
Dust Cap

994399395
NR8294-1C: RNCC: 3 | RNVC: 2
MR8294-1C: RNCC: 5 | RNVC: 2
4GD7008: RNCC: 6 | RNVC: 9
001U4-881: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-791-2649
Detent Plunger

997912649
606-2716: RNCC: 3 | RNVC: 2
AB/1/2/24201: RNCC: 5 | RNVC: 2
MM7934: RNCC: 5 | RNVC: 2
03503: RNCC: 5 | RNVC: 2
PE 7528 ITEM 15: RNCC: 5 | RNVC: 2
PE 7528/15: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-905-5103
Fuel Injecto Sleeve

999055103
SR1028/2: RNCC: 3 | RNVC: 2
SR1382/6: RNCC: 5 | RNVC: 2
AL5580: RNCC: 6 | RNVC: 9
0278-92/4: RNCC: 6 | RNVC: 9
257-97/5: RNCC: 6 | RNVC: 9

28 Aug 1997

5340-99-252-3551
Rod End Clevis

992523551
NB-50-A4-871: RNCC: 3 | RNVC: 2
B-50-871: RNCC: 5 | RNVC: 2
B500871: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-716-7451
Electrical-Mec Post

997167451
RRA827623: RNCC: 3 | RNVC: 2
RRA827623: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-707-2578
Threaded Gland

997072578
F62502525: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-99-467-3159
Angle Bracket

994673159
37C2704: RNCC: 3 | RNVC: 2
26TA16379: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-616-6215
Loop Clamp

996166215
SL4804-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-256-0097
Handwheel

992560097
K18653 REF 2: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-99-749-3048
Access Cover

5340-99-202-5490
Resilient Mount