What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 75 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 75 of 368

5340-99-662-8735
Corrosion Preventive Anode

996628735
ZD77: RNCC: 3 | RNVC: 2
250113: RNCC: 5 | RNVC: 2
90805: RNCC: 5 | RNVC: 2

11 Dec 1995

5340-99-670-3823
Butt Hinge

996703823
218-9110: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-99-603-5131
Retaining Strap

996035131
A275953-2: RNCC: 3 | RNVC: 2
A275953-2: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-739-0196
Antivibration M Kit

997390196
SCA 12560: RNCC: 3 | RNVC: 2

29 Sep 1993

5340-99-805-0836
Loop Clamp

998050836
FV246326-8: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-618-6510
Clamping Catch

996186510
B27884: RNCC: 1 | RNVC: 2
ADT0-1: RNCC: 3 | RNVC: 1
50-535: RNCC: 5 | RNVC: 1
122505535: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-335-9657
Pipe Hanger

993359657
6-4.S.10250: RNCC: 3 | RNVC: 2
26DL10285: RNCC: 6 | RNVC: 9

25 Apr 2002

5340-99-553-1205
Door Handle

5340-99-556-4378

5340-99-556-4377

5340-99-556-5085

5340-99-416-6735
Mounting Bracket

994166735
EB7-80-605: RNCC: 3 | RNVC: 2
26FZ-33686: RNCC: 6 | RNVC: 9
26FZ33686: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-796-4024
Mounting Bracket

997964024
EA2-83-5561: RNCC: 3 | RNVC: 2
26FZ-33128: RNCC: 6 | RNVC: 9

6 Jul 2001

5340-99-766-4803
Rim Lock

997664803
Q2: RNCC: 3 | RNVC: 1
810-501-2659: RNCC: 5 | RNVC: 2
8105012659: RNCC: 5 | RNVC: 2
H742-896224: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-807-7615
Clamping Catch

998077615
1907: RNCC: 3 | RNVC: 2
5118-11-54: RNCC: 5 | RNVC: 2
FE951CK0044: RNCC: 6 | RNVC: 9

17 Oct 1995

5340-99-808-1332
Quick Release Pin

998081332
NO PRIMARY REF 99-808-1332: RNCC: 3 | RNVC: 2
506: RNCC: 5 | RNVC: 2

19 Oct 1979

5340-99-756-7852
Angle Bracket

997567852
RR/B515241: RNCC: 3 | RNVC: 2
RR/B515241: RNCC: 5 | RNVC: 2

25 Jul 1984

5340-99-791-8040
Detent Plunger

997918040
GN614-8: RNCC: 3 | RNVC: 2
AB/1/2/12204: RNCC: 5 | RNVC: 2
MM7855: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-871-6443
Headless Straight Rod

998716443
R04/22221/00: RNCC: 3 | RNVC: 2
81668130005: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-99-667-8146
Filler Opening Cap

996678146
109-011-021: RNCC: 3 | RNVC: 2
C-CS0359-215: RNCC: 5 | RNVC: 2

9 Dec 2010

5340-99-782-8504
Angle Bracket

997828504
WG1383-0406-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-476-6989
Mounting Plate

994766989
28217-205: RNCC: 3 | RNVC: 2

16 Dec 2013

5340-99-425-6043
Mortar Spring

994256043
NO PRIMARY REF 99-425-6043: RNCC: 3 | RNVC: 2
UCW20447-82-12: RNCC: 5 | RNVC: 2
88730-703-491: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-273-0181
Dust And Moisture Seal Protective Cap-Plug

992730181
DP150SS: RNCC: 3 | RNVC: 2
G3 40091 7739: RNCC: 5 | RNVC: 2
DP150SS: RNCC: 5 | RNVC: 2
0515W-004: RNCC: 6 | RNVC: 9

12 Apr 2005

5340-99-718-9771
Rod End Clevis

997189771
S61-0526-52: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-345-7245
Midi Operator

993457245
NO PRIMARY REF 99-345-7245: RNCC: 3 | RNVC: 2
714600: RNCC: 5 | RNVC: 2
TT8880584: RNCC: 6 | RNVC: 9

16 May 2007

5340-99-836-5655
Distance Ring

998365655
0977-014: RNCC: 3 | RNVC: 2
020150 R1 DL02535: RNCC: 5 | RNVC: 2

26 Aug 2009

5340-99-762-8138
Rod End Clevis

997628138
GO5581-287A: RNCC: 3 | RNVC: 2
G05581-287A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-839-5353
Nut And Bolt Locking Plate

998395353
1823 590 M1: RNCC: 3 | RNVC: 2
1823-590M1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-601-9351
General Purpose Resilient Mount

996019351
WG1480-9015-042: RNCC: 3 | RNVC: 2
104Y2-007: RNCC: 6 | RNVC: 9

21 Jul 2010

5340-99-717-7485
Bow Handle

997177485
LPH1050: RNCC: 3 | RNVC: 2
B34830: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-714-9860
Rod End Clevis

997149860
MBEU1166GQ5: RNCC: 3 | RNVC: 2
AMBEU1166GQ5: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-500-8094
Silencer Cover

995008094
160.44.000.003: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-99-453-0801
Access Cover

994530801
A27739: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-305-3258
Mounting Bracket

993053258
52RBT00A0001: RNCC: 3 | RNVC: 2

29 Apr 1991

5340-99-668-1229
Rim Lock

996681229
25.25.3050: RNCC: 3 | RNVC: 2

21 Sep 2011

5340-99-454-0946
Loop Clamp

994540946
MBEU23005: RNCC: 3 | RNVC: 2
BMBEU23005: RNCC: 5 | RNVC: 2
27L3949: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-144-7754
Dust And Moisture Seal Protective Plug

991447754
200296784: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-4885
Nut A Locking Plate

5340-99-468-5818

5340-99-282-4992

5340-99-437-7230

5340-99-930-7490
Spring Tension Clip

999307490
NRC9338: RNCC: 3 | RNVC: 2
FJ9615L1409: RNCC: 6 | RNVC: 9
(241)AE095NRC9338: RNCC: 8 | RNVC: 2
NRC9338: RNCC: 8 | RNVC: 2

10 Aug 1996

5340-99-437-8594

5340-99-323-9954
Pipe Hanger

993239954
W700706S300: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-99-667-0660
Mounting Plate

996670660
19862-191: RNCC: 3 | RNVC: 2

30 May 2008

5340-99-483-2273
Dust And Moisture Seal Protective Cover

994832273
MZK4449: RNCC: 3 | RNVC: 2
AMFA039: RNCC: 5 | RNVC: 2
0335K-006: RNCC: 6 | RNVC: 9

20 Aug 2003

5340-99-616-6472
Loop Clamp

996166472
STD2348-14: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-638-7644
Electrical-Mec Post

996387644
GW4885103-001-200: RNCC: 3 | RNVC: 2
B44942: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-798-6711
Angle Bracket

997986711
KB956K0121-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-051-0856
Rod End Clevis

990510856
4-OWE-199865: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-346-9788
Angle Bracket

993469788
15-00808-009: RNCC: 3 | RNVC: 2
15-00808: RNCC: 5 | RNVC: 1
FJ9512A7096: RNCC: 6 | RNVC: 9

9 Oct 1995

5340-99-610-5227
Threaded End Tensioning Tie Rod

996105227
573232: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-131-2616
General Purpose Access Door

991312616
110653SHT615: RNCC: 3 | RNVC: 2
26VC16747: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-297-6683
Mounting Plate

992976683
MBEU171131: RNCC: 3 | RNVC: 2
MBEU171131: RNCC: 5 | RNVC: 2

25 Jun 2002

5340-99-292-5053
Mechanic Equipment Hardware Kit

992925053
PE36094: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-99-594-5647
Angle Bracket

995945647
P-051057-003: RNCC: 3 | RNVC: 2
P051057-003: RNCC: 5 | RNVC: 2

16 Apr 1997

5340-99-051-0519
General Purpose Resilient Mount

990510519
P403-19A/3: RNCC: 3 | RNVC: 2
P403-19A: RNCC: 5 | RNVC: 1
P-870254-005: RNCC: 5 | RNVC: 2
P870254-005: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-978-2906
Protective Cap

999782906
4780759: RNCC: 3 | RNVC: 2
4780759: RNCC: 5 | RNVC: 2
4780759-9: RNCC: 5 | RNVC: 2
4780759-9: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-613-0515
Nut And Bolt Retainer

996130515
121E10-101-38-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-174-5616
Crank Handle

991745616
8192-203: RNCC: 3 | RNVC: 2
10581F ITEM 21: RNCC: 5 | RNVC: 2
10581F/21: RNCC: 5 | RNVC: 2

3 Jul 2002

5340-99-357-9151
Mounting Bracket

993579151
NO PRIMARY REF 99-357-9151: RNCC: 3 | RNVC: 2
MD-0159-10: RNCC: 5 | RNVC: 2

4 Jan 2012

5340-99-213-0450
Fairlead Assembly

992130450
P735110-401: RNCC: 3 | RNVC: 2
PRO2735133: RNCC: 5 | RNVC: 9

11 Apr 2007

5340-99-451-0585

5340-99-450-5191

5340-99-630-9037
Electrical-Mec Post

996309037
SDA247328: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-131-9129
Dust And Moisture Seal Protective Cap

991319129
CD16284: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-201-9674
Access Cover

992019674
MEXED15111: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-406-2092
Loop Clamp

994062092
AS1162-8: RNCC: 2 | RNVC: 2
28E17734: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-966-8294
Protective Cap

999668294
OS96000GA ITEM 28: RNCC: 3 | RNVC: 2
E715-1/1: RNCC: 5 | RNVC: 2
0S96000GAITEM28: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-137-1938
Dust And Moisture Seal Protective Cap

991371938
AGS3806-6: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
35B50001: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-797-7643
Bottom Bolt Bracket

997977643
HE67182.Z.53: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-860-8058
Mounting Bracket

998608058
MBEU171691-1: RNCC: 3 | RNVC: 2

30 Oct 2003

5340-99-778-3521
Door Handle

997783521
1608: RNCC: 3 | RNVC: 1
PC38624-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-156-4728
Bellows Assembly

991564728
AFM 80 203518: RNCC: 3 | RNVC: 2
SR0746/5: RNCC: 5 | RNVC: 2
0713-83/1: RNCC: 6 | RNVC: 9

4 Nov 1997

5340-99-701-8640
Access Door

997018640
A2510733-2: RNCC: 3 | RNVC: 2
510733-2: RNCC: 5 | RNVC: 2

2 Dec 1994

5340-99-152-0608
Access Cover

991520608
5577 ISS A: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-99-391-1168
Block Clamp

5340-99-371-1180
Mounting Plate

5340-99-449-2482

5340-99-332-9596

5340-99-147-0188
Rubber Bumper

991470188
AB/01/11/02013: RNCC: 3 | RNVC: 2
MM7618: RNCC: 5 | RNVC: 2
AB/1/11/2013: RNCC: 6 | RNVC: 9

20 Oct 1992

5340-99-291-1518
Access Cover

992911518
DPAD 4S W3/C: RNCC: 3 | RNVC: 2
FH180-1014-500N: RNCC: 5 | RNVC: 2

2 Apr 2012

5340-99-878-8679
Spares Kit

998788679
NO PRIMARY REF 99-878-8679: RNCC: 3 | RNVC: 2
DILSL8/18.8: RNCC: 5 | RNVC: 2
DILSL8/18.8: RNCC: 5 | RNVC: 9

19 Nov 2010

5340-99-731-2908
Ball Socket Seat

997312908
SSK/Y/581/98/0405/102: RNCC: 3 | RNVC: 1
QCA/SSK/Y/581/98/0405/102: RNCC: 5 | RNVC: 1
001284689: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-507-3361
Access Cover

995073361
22702-198: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-99-741-7073
Cover

997417073
125/00209: RNCC: 3 | RNVC: 2

3 May 2001

5340-99-829-1481
Rod End Connector

998291481
881728M1: RNCC: 3 | RNVC: 2
881-728M1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-615-3529
Retaining Strap

996153529
KB290K0032-136: RNCC: 3 | RNVC: 2
KB290K0032-136: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-833-0370
Rod End Clevis

998330370
110085-1229: RNCC: 3 | RNVC: 2
26VC/15586: RNCC: 6 | RNVC: 9

16 Jan 2002

5340-99-126-9566
Access Cover

991269566
182/05076: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

10 Oct 2000

5340-99-867-8860
Mounting Bracket

998678860
1114L10159/701: RNCC: 3 | RNVC: 2
1114L10159 ASSY 701: RNCC: 5 | RNVC: 2

9 Dec 2009

5340-99-813-1946
Webbing Strap

998131946
GD600681: RNCC: 3 | RNVC: 2
GD600681-01: RNCC: 5 | RNVC: 2

15 Apr 2010

5340-99-778-0055
Hook

997780055
62/57030: RNCC: 3 | RNVC: 2
62-57030: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-385-4560
Helical Compression Spring Retainer

993854560
5419: RNCC: 3 | RNVC: 2
5799 ITEM 12: RNCC: 5 | RNVC: 2
5799/12: RNCC: 5 | RNVC: 2

21 Apr 2011

5340-99-721-2723
Sliding Bracket

997212723
SSN.07/Y/530/M.01/003: RNCC: 3 | RNVC: 2
Y/530/M.01/003: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-226-0182
Lock Spindle

992260182
HLD126-307: RNCC: 3 | RNVC: 2
HLD126-307: RNCC: 5 | RNVC: 9

11 Aug 2008

5340-99-723-2895
Electrical-Mec Post

997232895
904801-3502-002: RNCC: 3 | RNVC: 2
35308-300: RNCC: 5 | RNVC: 2

14 Dec 1988

5340-99-655-2900
Engine Accessory Bracket

996552900
WG1350-0036-045: RNCC: 3 | RNVC: 2
26LX2384: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-201-5479
Retaining Strap

992015479
L635-35: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-417-9594
Mounting Plate

994179594
25455-193: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-99-411-7049
Angle Bracket

994117049
FV2271073: RNCC: 3 | RNVC: 2
0621W-018: RNCC: 6 | RNVC: 9

11 May 2006

5340-99-001-6164
Mounting Bracket

990016164
341A65-7864-01: RNCC: 3 | RNVC: 2

7 Jan 1994

5340-99-244-9090
Angle Bracket

992449090
WG1312-0858-10901: RNCC: 3 | RNVC: 2
XP98PC01071: RNCC: 6 | RNVC: 9

12 Mar 1998

5340-99-151-8615
Latch Bar

991518615
25719-204: RNCC: 3 | RNVC: 2

17 Nov 2010

5340-99-109-1007
Loop Clamp

991091007
AS6703-10: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-253-2059
Spacing Threaded Standoff

992532059
65988BV: RNCC: 3 | RNVC: 2
A3/65988BV: RNCC: 5 | RNVC: 2
886AK8734: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-254-7535
Mounting Plate

992547535
NRC8204: RNCC: 3 | RNVC: 2
A3/NRC8204: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-746-0711
Mounting Plate

997460711
110087-809: RNCC: 3 | RNVC: 2
26VC20673: RNCC: 6 | RNVC: 9

10 Apr 2002

5340-99-865-5224
Mechanic Equipment Hardware Kit

998655224
KP37915: RNCC: 3 | RNVC: 2

3 Jan 2013

5340-99-610-9948
Block Fairlead Section

996109948
137200D91: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-866-8039
General Purpose Resilient Mount

998668039
FV396550: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-769-9538
Retaining Strap

997699538
0G0290013: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-863-5060
Sealing Plug Assembly

998635060
064200018: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-99-772-0594
Handwheel

997720594
ND16291: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-770-6590
Finger

997706590
AD81327: RNCC: 3 | RNVC: 2

14 Sep 1987

5340-99-618-6145
Electrical-Mec Post

996186145
811815: RNCC: 3 | RNVC: 2
V811815: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-225-6435
Access Cover

992256435
JJ115746: RNCC: 3 | RNVC: 2

12 May 1997

5340-99-399-1141
Seal Cover

993991141
31555592: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-99-224-3097
Dust And Moisture Seal Protective Plug

992243097
K9591: RNCC: 3 | RNVC: 2
6D1802: RNCC: 6 | RNVC: 9
6D1802: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-280-2508
Mounting Plate

992802508
FV2227951: RNCC: 3 | RNVC: 2

13 Oct 2006

5340-99-145-5302
Retaining Strap

991455302
77512294: RNCC: 3 | RNVC: 2
Y77512294: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-792-8427
Padlock

997928427
5P8502: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-792-8159
Engine Moun Bracket

997928159
NRC 5434: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-792-1983
Access Cover

997921983
119415: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-428-9959
Handwheel

994289959
AML11577: RNCC: 3 | RNVC: 2
6F534: RNCC: 6 | RNVC: 9

7 Nov 1978

5340-99-962-2341
Access Cover

999622341
AN9188: RNCC: 3 | RNVC: 2
87500230: RNCC: 5 | RNVC: 2
197307: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-950-4194
Mounting Bracket

999504194
17-44229: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-953-4830
Retaining Strap

999534830
03-53810: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-724-7878
Double Angle Bracket

997247878
FV2273839: RNCC: 3 | RNVC: 2

11 May 2007

5340-99-562-3746
Access Cover

995623746
1498V013: RNCC: 3 | RNVC: 2

25 Oct 1994

5340-99-606-7559
Spring Tension Clip

996067559
B354043: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-430-8821
Angle Bracket

994308821
HCT122029: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-99-467-7197
Loop Clamp

994677197
14SS4490: RNCC: 3 | RNVC: 2
26TA8665: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-539-1116
Rubber Bumper

995391116
1049-3613-4: RNCC: 3 | RNVC: 2
M300845: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-759-6236
Spacing Threaded Standoff

997596236
A20114: RNCC: 3 | RNVC: 2
2258951: RNCC: 5 | RNVC: 2
106144085224: RNCC: 5 | RNVC: 2
2258951: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-761-9655
Manual Control Lever

997619655
200758245: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-600-7538
Spring Tension Clip

5340-99-226-0345
Mounting Bracket

992260345
N71200033-404: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-99-466-8082
Rod End Clevis

994668082
SRH12-45-2313: RNCC: 3 | RNVC: 2
H12-45-2313: RNCC: 5 | RNVC: 2
26SW5535: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-104-4172
Electrical-Mec Post

991044172
WB/UN/1593: RNCC: 3 | RNVC: 2
8146: RNCC: 5 | RNVC: 2
C725068: RNCC: 5 | RNVC: 2
36DE3398: RNCC: 6 | RNVC: 9
36DE3398: RNCC: 6 | RNVC: 9
78ED9332: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-791-1405
Loop Clamp

997911405
P609074: RNCC: 3 | RNVC: 2
TDS210/24: RNCC: 5 | RNVC: 1
810-501-3354: RNCC: 5 | RNVC: 2
8105013354: RNCC: 5 | RNVC: 2
S5013354: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-435-3691
Oil Seal Plug

994353691
RU45314: RNCC: 3 | RNVC: 2
45314/21: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-99-539-2459
Buffer

995392459
1052-131-14: RNCC: 3 | RNVC: 2
1052/131.14: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-905-9558
Runner

999059558
EA5610A084-042: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-877-8153
Block Fairlead Section

998778153
EU7170B055-105: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-99-491-1295
Block Clamp

994911295
110087-339: RNCC: 3 | RNVC: 2
26VC-20786: RNCC: 6 | RNVC: 9

2 Feb 2002

5340-99-549-4944
Mounting Bracket

995494944
WG1413-0007-041: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-99-902-2193
Mounting Bracket

999022193
A3-97148: RNCC: 3 | RNVC: 2

31 Aug 1993

5340-99-953-4931
Clip

999534931
A17-49279: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-815-2315
Catch Strike

998152315
TL-17-201-52: RNCC: 3 | RNVC: 2

9 Nov 2011

5340-99-813-1514
Mounting Plate

998131514
ISTEC 5243-40D: RNCC: 3 | RNVC: 2
5243: RNCC: 5 | RNVC: 2

1 Feb 2010

5340-99-103-4161
Handle Grip

991034161
H12-45-599: RNCC: 3 | RNVC: 2
SRH12-45-599: RNCC: 5 | RNVC: 2
26SW563: RNCC: 6 | RNVC: 9
26SW563: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-242-9460
Mounting Plate

992429460
EU6205G002-127: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-99-825-6206
Line Supporting Strap

998256206
220-ED483-00: RNCC: 3 | RNVC: 2
0009179191: RNCC: 5 | RNVC: 2
9179191: RNCC: 5 | RNVC: 2
567817: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-943-8843
Screwed Spacer

999438843
NO PRIMARY REF 99-943-8843: RNCC: 3 | RNVC: 2
RRA502355: RNCC: 5 | RNVC: 2

23 Sep 1982

5340-99-867-6015
Retaining Strap

998676015
841432R1: RNCC: 3 | RNVC: 2
841432R1: RNCC: 5 | RNVC: 9
LV8RE1H841-432R1: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-943-5723
Loop Clamp

999435723
AS3180-8B: RNCC: 2 | RNVC: 2
AIRWORTHY CERTIFICATION ITEM: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-891-0460
Access Cover

998910460
J52400310-401: RNCC: 3 | RNVC: 2
061MW-203: RNCC: 6 | RNVC: 9

21 May 2005

5340-99-961-3100
Angle Bracket

999613100
75A327628-2002: RNCC: 3 | RNVC: 2
0342P-027: RNCC: 6 | RNVC: 9
034HC-003: RNCC: 6 | RNVC: 9

25 Nov 2003

5340-99-961-8002
Handle Grip

999618002
MG2531: RNCC: 3 | RNVC: 2
21155011: RNCC: 6 | RNVC: 9
C1MG2531: RNCC: 6 | RNVC: 9
7A2563: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-795-0608
Clamp

997950608
FV 2208118: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-99-792-9938
Blind Kit Insert

997929938
TR17560: RNCC: 3 | RNVC: 2
ST53010: RNCC: 5 | RNVC: 2
EX127557: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-795-3546
Mounting Bracket

997953546
FV 1017263: RNCC: 3 | RNVC: 2
FV 1017263: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-99-793-1261
Drip Pan

997931261
400: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-810-1941
Hinged Hasp

998101941
FV579064: RNCC: 3 | RNVC: 2

12 Feb 1980

5340-99-810-3341
Access Cover

998103341
TGB4984: RNCC: 3 | RNVC: 2
LV1DBTGB4984: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-809-7326
Dust And Moisture Seal Boot

998097326
CMK2637: RNCC: 3 | RNVC: 2

25 Mar 1981

5340-99-806-8583
Dust And Moisture Seal Boot

998068583
RS221: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-797-6069
Dust And Moisture Seal Protective Cap-Plug

997976069
A512: RNCC: 3 | RNVC: 2

21 Jan 1986

5340-99-799-9500
Block Clamp

997999500
EA126A15: RNCC: 3 | RNVC: 2

4 Apr 2009

5340-99-709-5234
Bracket

997095234
M5725820920000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-231-7289
Mounting Plate

992317289
124-5179-588: RNCC: 1 | RNVC: 2
908318: RNCC: 3 | RNVC: 2

18 Nov 2010

5340-99-215-7361
Mounting Bracket

992157361
AS68481: RNCC: 3 | RNVC: 2

16 Jan 1997

5340-99-610-9972
Block Fairlead Section

996109972
137200D147: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-611-0964
Expansion Plug

996110964
616217: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-3109
Headle Straight Rod

997953109
FV 907300: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-978-1322
Clip

999781322
SC01863/17/4: RNCC: 3 | RNVC: 2
ACU1343: RNCC: 5 | RNVC: 2

26 Sep 1986

5340-99-499-9648
Access Cover

994999648
AB/1/10/1012: RNCC: 3 | RNVC: 2
MM7113: RNCC: 5 | RNVC: 2

4 Feb 1993

5340-99-496-1043
Electrical-Mec Post

994961043
630/2/56952: RNCC: 3 | RNVC: 2
630/2/56952: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-99-782-8898
General Purpose Resilient Mount

997828898
13/Y/552/0060/M009/000: RNCC: 3 | RNVC: 2
001207918: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-559-7746
Loop Clamp

995597746
9/971-5/983-4/7: RNCC: 3 | RNVC: 2
9 ITEM 7: RNCC: 5 | RNVC: 2
9-7: RNCC: 5 | RNVC: 2
J354-462887: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-991-7156
Loop Clamp

999917156
76/9060: RNCC: 3 | RNVC: 2
G406/8015/39: RNCC: 5 | RNVC: 2
G406/8015 ITEM 39: RNCC: 5 | RNVC: 2

7 Aug 2002

5340-99-921-3789
Bearing Pad

999213789
G414/4582/16: RNCC: 3 | RNVC: 2
G414/4582 ITEM 16: RNCC: 5 | RNVC: 2

26 Feb 2002

5340-99-524-4030
Loop Clamp

995244030
FBS726L: RNCC: 3 | RNVC: 2
FBS726-L: RNCC: 5 | RNVC: 2
742-425-4030: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-629-9673
Mounting Bracket

996299673
00-1097-1016: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-99-777-9644
Angle Bracket

997779644
2G3/10660: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-702-0400
Butt Hinge

997020400
15-01797-000: RNCC: 3 | RNVC: 2
15-01797: RNCC: 5 | RNVC: 2
FJ9512A7035: RNCC: 6 | RNVC: 9

6 Oct 1995

5340-99-119-1241
Spring Tension Clip

991191241
A95-18289: RNCC: 3 | RNVC: 2
A95-18289: RNCC: 5 | RNVC: 2
10H24850: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-915-4460
Angle Bracket

999154460
EA206-107: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-99-350-8945
Adaptor Assembly

993508945
K108228/001: RNCC: 3 | RNVC: 2
FF9803N0001: RNCC: 6 | RNVC: 9

10 Feb 1998

5340-99-212-7046
Mounting Bracket

992127046
NO PRIMARY REF 99-212-7046: RNCC: 3 | RNVC: 2
ANR 3099: RNCC: 5 | RNVC: 2
ANR3099: RNCC: 8 | RNVC: 2
(241)AE095ANR3099: RNCC: 8 | RNVC: 2

22 Apr 2003

5340-99-715-8188
Angle Bracket

997158188
S6120-61279-11: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-7667
Nut And Bolt Locking Plate

991537667
HD-70585: RNCC: 3 | RNVC: 2
50053072: RNCC: 5 | RNVC: 2

8 Aug 2013

5340-99-880-0583
Double Angle Bracket

998800583
EU3130C008-101: RNCC: 3 | RNVC: 2

18 Sep 2013

5340-99-846-1100
Mounting Bracket

998461100
402-450-008: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-99-876-0016
Manual Control Lever

998760016
9126 2052-01: RNCC: 3 | RNVC: 2
9126 2052-01: RNCC: 5 | RNVC: 2
9126 2052-01: RNCC: 5 | RNVC: 2

3 Jan 1992

5340-99-840-4687
Angle Bracket

998404687
44-13-00600-00: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-99-663-4546
Angle Bracket

996634546
EA208-002: RNCC: 3 | RNVC: 2

9 May 1995

5340-99-727-7162
Mechanical Stop

997277162
ECUK3302025-601-01: RNCC: 3 | RNVC: 2

13 Nov 2013

5340-99-645-1291
Manual Control Lever

996451291
WD0584-00034-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-544-7239
Access Cover

995447239
K145-62-633: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-99-728-1857
Rubber Block

997281857
SM70-20267: RNCC: 3 | RNVC: 2

6 Feb 1987

5340-99-349-5201
Electrical-Mec Post

993495201
660-04-831632-105-41: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-99-011-2981
Element

5340-99-990-9073
Filler Opening Cap

999909073
511100900: RNCC: 3 | RNVC: 2
CV130433: RNCC: 5 | RNVC: 2

1 Nov 2013

5340-99-974-0494
Return Air Filter

999740494
293F9500659: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-974-2897
Dust And Moisture Seal Protective Cap

999742897
8001850011: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-99-987-6010
Loop Clamp

999876010
14500294: RNCC: 3 | RNVC: 2
VOE14500294: RNCC: 5 | RNVC: 2
CV184379: RNCC: 5 | RNVC: 2

13 Apr 2011

5340-99-986-7073
Corrosion Preventive Anode

999867073
PAAZSUV015PL: RNCC: 3 | RNVC: 2

17 Jul 2012

5340-99-967-7435
Reaction Plate

999677435
MZK3198: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-974-2654
Retaining Strap

999742654
0596: RNCC: 3 | RNVC: 2
PN00000825: RNCC: 5 | RNVC: 2

12 Mar 2009

5340-99-989-1029
End Cap

999891029
FV 2175957: RNCC: 3 | RNVC: 2
FV 2175957: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-99-127-5449

5340-99-137-2924

5340-99-152-0975
Mounting Bracket

991520975
41259128: RNCC: 3 | RNVC: 2

4 May 2011

5340-99-600-1703
Access Cover

996001703
6M4FP8209A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-138-6464

5340-99-193-2305

5340-99-212-4428
Sleeve

992124428
80 000 204: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-99-355-4915
Nut Movem Indicator

993554915
CHECKPOINT YELLOW 17MM: RNCC: 3 | RNVC: 2
25076936: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-99-409-8353
Loop Clamp

994098353
FV 2202036: RNCC: 3 | RNVC: 2

8 Dec 1995

5340-99-413-4079
Multiple Angle Bracket

994134079
70 000 213: RNCC: 3 | RNVC: 2

3 Feb 2004

5340-99-127-5515

5340-99-126-5467
Watertight Door

5340-99-127-5469

5340-99-127-5463

5340-99-752-0251
Webbing Strap

997520251
200 MM LG X 20 MM W: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-99-511-0335
Holder

995110335
SES 901 062/1: RNCC: 3 | RNVC: 2

14 May 2004

5340-99-100-1947
Rubber Bushing

991001947
SDA136970-1: RNCC: 3 | RNVC: 2
SDA136970-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-838-7996
Loop Clamp

998387996
FV932314-5: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-99-865-6290
Extension Drawer Slide

998656290
4502-LRTCRG-X001: RNCC: 3 | RNVC: 2
16420-A: RNCC: 5 | RNVC: 2

12 Sep 2008

5340-99-836-4200
Webbing Strap

998364200
5/2404: RNCC: 3 | RNVC: 2
80022273: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-99-737-3516
Dust And Moisture Seal Protective Plug

997373516
HTE716-G: RNCC: 3 | RNVC: 2
A48977: RNCC: 5 | RNVC: 2
PTUW322A: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-749-2022
Pla Retaining Strip

997492022
91051253: RNCC: 3 | RNVC: 2
111552/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-255-3603
Mounting Bracket

992553603
FV2249015: RNCC: 3 | RNVC: 2
FV2249015: RNCC: 5 | RNVC: 2
040Q6-003: RNCC: 6 | RNVC: 9

26 Mar 2004

5340-99-417-9533
Hinge

994179533
NO PRIMARY REF 99-417-9533: RNCC: 3 | RNVC: 2
29G998: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-580-4338
Plate Centre

995804338
NO PRIMARY REF 99-580-4338: RNCC: 3 | RNVC: 2
164890: RNCC: 5 | RNVC: 2
164890: RNCC: 5 | RNVC: 9
164890: RNCC: 6 | RNVC: 9

16 Nov 2010

5340-99-447-2173
Rubber Sleeve

994472173
NO PRIMARY REF 99-447-2173: RNCC: 3 | RNVC: 2
45436: RNCC: 5 | RNVC: 9
Y1ZA25230: RNCC: 6 | RNVC: 9

1 Apr 1977

5340-99-146-6453
Angle Bracket

991466453
SS1061-226: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-170-5384
Sleeve

991705384
3A327-0299: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-99-433-6365
Ring

994336365
NO PRIMARY REF 99-433-6365: RNCC: 3 | RNVC: 2
0S35827: RNCC: 5 | RNVC: 2
88115-104-602: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-840-1663
Filler Opening Cap

5340-99-881-8075

5340-99-635-4516
Loop Clamp

996354516
SDA233406: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-551-6035
Mounting Bracket

995516035
A7121100: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-99-534-5775
Nut And Bolt Locking Plate

995345775
YJ.46165A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-747-8433
Retaining Strap

997478433
865087: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-463-0270

5340-99-749-2423
Bracket Assy

997492423
M5755472800100: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-602-1260
Access Cover

996021260
FV 2190760: RNCC: 3 | RNVC: 2

19 May 1993

5340-99-617-8023

5340-99-600-5701

5340-99-603-4041

5340-99-757-2005
Resilient Mount

997572005
GBSG5215: RNCC: 3 | RNVC: 2
52PSA004001A: RNCC: 5 | RNVC: 2
52PSA00A0001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-756-0822
Retaining Strap

997560822
362139: RNCC: 3 | RNVC: 2
362139A4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-748-0637
Manual Control Lever

997480637
200 401 A07873 A06: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-813-0632
Mounting Bracket

998130632
360-100-018: RNCC: 3 | RNVC: 2
FP180: RNCC: 6 | RNVC: 9

7 Oct 2009

5340-99-359-9148
Missile Gate Frame

993599148
1172-IK-LIN-00322/2: RNCC: 3 | RNVC: 2
0231G-046: RNCC: 6 | RNVC: 9

4 Oct 2002

5340-99-346-9432
Mounting Bracket

993469432
AB/2/9/2001: RNCC: 3 | RNVC: 2
MM8042: RNCC: 5 | RNVC: 2

23 Dec 1992

5340-99-653-9399
Hinge Bracket

996539399
NO PRIMARY REF 99-653-9399: RNCC: 3 | RNVC: 2
822925: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-051-3563
Angle Bracket

990513563
3052/100/945: RNCC: 3 | RNVC: 2
P2140: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-510-0652
Block Clamp

995100652
110087SHT473: RNCC: 3 | RNVC: 2
26VC-21311: RNCC: 6 | RNVC: 9

11 Feb 2002

5340-99-313-4068
Mounting Plate

993134068
ER5333B044-103: RNCC: 3 | RNVC: 2
941ME3254: RNCC: 6 | RNVC: 9

29 Aug 1994

5340-99-949-1047
Screwed Spacer

999491047
NO PRIMARY REF 99-949-1047: RNCC: 3 | RNVC: 2
SDA174586: RNCC: 5 | RNVC: 9

19 Jun 1986

5340-99-837-2793
Bridge Clamp

998372793
FV720809: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-7533
Manual Control Lever

998307533
FV 2066553: RNCC: 3 | RNVC: 2
FV 2066553: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-6290
Mounting Bracket

999586290
2251.5B: RNCC: 3 | RNVC: 2
2500602098: RNCC: 5 | RNVC: 2
72211842: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-99-834-0712
Access Cover

998340712
FV2255320: RNCC: 3 | RNVC: 2
FV2255320: RNCC: 5 | RNVC: 2

30 Oct 2004

5340-99-894-8789
Spring Cup

998948789
110031-1783: RNCC: 3 | RNVC: 2
26VC-3109: RNCC: 6 | RNVC: 9

31 Jul 2004

5340-99-826-7518
Tie Rod

998267518
FV 396590: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-947-1501
Dust And Moisture Seal Protective Cap

999471501
5CA24163: RNCC: 3 | RNVC: 2
5CA24163: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-961-2225
Butt Hinge Leaf

999612225
110328-2631: RNCC: 3 | RNVC: 2

18 Nov 1992

5340-99-173-8206
Key

991738206
PN00004802: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-99-831-8939
Multiple Angle Bracket

998318939
FV 870351: RNCC: 3 | RNVC: 2
VP 10695: RNCC: 5 | RNVC: 2
FH9521R0030: RNCC: 6 | RNVC: 9

19 Sep 1995

5340-99-849-8338
Butt Hinge

998498338
303875: RNCC: 3 | RNVC: 2
LV7RU303875: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-580-8180
Bow Handle

995808180
204-101-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-850-5215
Mounting Bracket

998505215
P-098753-401: RNCC: 3 | RNVC: 2
P098753-401: RNCC: 5 | RNVC: 2
TORNADO-8610: RNCC: 6 | RNVC: 9

26 Jun 2013

5340-99-701-2502
Retaining Strap

997012502
S-65-2469-50: RNCC: 3 | RNVC: 2

19 Dec 1991

5340-99-250-7656
Loop Clamp

992507656
3-OWE-205788: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-384-7171
Access Cover

993847171
FV 2197232: RNCC: 3 | RNVC: 2
FV 2197232: RNCC: 5 | RNVC: 2
MAE 22/0549: RNCC: 6 | RNVC: 9
SRN 7BPB00: RNCC: 6 | RNVC: 9

11 Mar 1994

5340-99-635-4252
Angle Bracket

996354252
703-18B6242: RNCC: 3 | RNVC: 2
D3383-292C: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-151-7375
Mounting Bracket

991517375
NB-46-0432: RNCC: 3 | RNVC: 2
10425-013: RNCC: 6 | RNVC: 9

17 Aug 2010

5340-99-492-8464
Access Door

994928464
ER9430F078-051: RNCC: 3 | RNVC: 2
1MEV2PW: RNCC: 6 | RNVC: 9

20 Nov 1998

5340-99-179-9413
Loop Clamp

991799413
WD682-11: RNCC: 3 | RNVC: 2

24 Sep 1993

5340-99-387-2113
Block Fairlead Section

993872113
EA3-81-2641: RNCC: 3 | RNVC: 2
26FZ-17096: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-745-8613
Rod End Clevis

997458613
MH/01200/SL/001/08: RNCC: 3 | RNVC: 2
004473011: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-150-8057
Retaining Strap

991508057
YB6-81-7173: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-720-4891
Retaining Strap

997204891
1873 860 M1: RNCC: 3 | RNVC: 2
1873-860M1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-665-3191
Rubber Pads.

996653191
NO PRIMARY REF 99-665-3191: RNCC: 3 | RNVC: 2
3370133: RNCC: 5 | RNVC: 2
C583-LWM042948: RNCC: 6 | RNVC: 9

23 Jun 2001

5340-99-608-4715
Block Fairlead Section

996084715
EA3-82-449: RNCC: 3 | RNVC: 2
26FZ-32319: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-636-8462
Dust And Moisture Seal Protective Cap

996368462
WG0069-0148-103: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-192-4337
Rod End Clevis

991924337
EB6605G517-107: RNCC: 3 | RNVC: 2

17 May 2008

5340-99-629-0753
Angle Bracket

5340-99-386-7750
Multiple An Bracket

5340-99-839-3912

5340-99-437-8324
Mounting Bracket

994378324
MBCS1834: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-99-632-2427

5340-99-630-4352

5340-99-827-2786
Antiluce Fastener

998272786
3263: RNCC: 3 | RNVC: 2
FV798250-2: RNCC: 5 | RNVC: 2
3263: RNCC: 5 | RNVC: 2
FV2061714: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-943-6943
Bow Handle

999436943
RRA50389-7: RNCC: 3 | RNVC: 2
SSML7-6: RNCC: 4 | RNVC: 1

20 Dec 1979

5340-99-348-9754
Mounting Bracket

993489754
RDK 7281: RNCC: 3 | RNVC: 2
30005 AMD: RNCC: 5 | RNVC: 2
MAK 3860: RNCC: 5 | RNVC: 2
3-5-AMD: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-99-710-3022
Angle Bracket

997103022
V21763: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-99-481-9963
Access Cover

994819963
588.800.033: RNCC: 3 | RNVC: 2
TT8880691: RNCC: 6 | RNVC: 9

4 Aug 2010

5340-99-973-9737
Clamp Rail

999739737
69302583: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-99-631-4972
Nonmetallic Bushing

996314972
AD602983: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-423-6079
Mechanic Equipment Hardware Kit

994236079
PE37489: RNCC: 3 | RNVC: 2

3 Jan 2013

5340-99-812-2215
Manual Control Handle

998122215
SST.Y.576.32.U003.102: RNCC: 3 | RNVC: 2

2 Jun 1998

5340-99-807-3724
Mounting Plate

998073724
6.0104.6078: RNCC: 3 | RNVC: 2
6.0104.6078: RNCC: 5 | RNVC: 2
601046078: RNCC: 5 | RNVC: 2

21 Nov 1994

5340-99-793-1423
Loop Clamp

997931423
M:T1:57:4601/6: RNCC: 3 | RNVC: 2
032PM-174: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-422-9502
Swivel Caster

994229502
TCR783206-1: RNCC: 3 | RNVC: 2
TRG783206-1: RNCC: 5 | RNVC: 2
4F2300: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-823-7640
Cooking V Container

998237640
FV663660: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-783-1451
Mounting Bracket

997831451
13D22728: RNCC: 3 | RNVC: 2
S-20502: RNCC: 5 | RNVC: 2

17 Jul 2003

5340-99-826-9643
Angle Bracket

998269643
F.V.715485: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-99-830-0697
Butt Hinge

998300697
FV872024-1: RNCC: 3 | RNVC: 2

2 Jul 1980

5340-99-837-0594
Access Cover

998370594
A1224002-I: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-99-826-0752
Loop Clamp

998260752
F.V.770596: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-839-1036
Clamp Assembly

998391036
NO PRIMARY REF 99-839-1036: RNCC: 3 | RNVC: 2
110082-1591ND: RNCC: 5 | RNVC: 2
26VC/14991: RNCC: 6 | RNVC: 9

2 Feb 2002

5340-99-831-8029
Access Cover

998318029
L300842/63: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-99-812-9981
Strapping Seal

998129981
5606/62: RNCC: 3 | RNVC: 2
Z5606/62: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-668-8816
Mounting Plate

996688816
ER2350B001-117: RNCC: 3 | RNVC: 2

23 May 2013

5340-99-333-1341
Compression Cup

993331341
A1027: RNCC: 3 | RNVC: 2
16H1049: RNCC: 6 | RNVC: 9
411-331341: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-161-4174
Mounting Bracket

991614174
330E52-0100-00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-388-6413
Manual Control Handle

993886413
NO PRIMARY REF 99-388-6413: RNCC: 3 | RNVC: 2
0108830: RNCC: 5 | RNVC: 2
CV138531: RNCC: 5 | RNVC: 2

21 May 2008

5340-99-700-3479
Dust And Moisture Seal Protective Plug

997003479
WG1316-7117-109: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-832-5906

5340-99-838-8399

5340-99-839-4206
Clamping Catch

5340-99-838-8883

5340-99-845-1552

5340-99-453-6343
Clamping Catch

994536343
FV 2171953: RNCC: 3 | RNVC: 2
FV 2171953: RNCC: 5 | RNVC: 2
FH493CL0002: RNCC: 6 | RNVC: 9

14 May 1996

5340-99-503-3730
Mounting Bracket

995033730
POG091824: RNCC: 3 | RNVC: 2

29 Aug 2008

5340-99-244-8883
Mounting Bracket

992448883
CC2372: RNCC: 3 | RNVC: 2

15 Aug 2007

5340-99-356-6232
Flush Catch Claw

993566232
PE33894: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-99-796-2454

5340-99-797-6172
Double Angl Bracket

5340-99-119-9874
Snap Hook

991199874
3435-0: RNCC: 3 | RNVC: 2
3227: RNCC: 5 | RNVC: 2
0472-472064: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-679-8580
Handle Assembly

996798580
WD15509: RNCC: 3 | RNVC: 2
SPCISR/10/2/44: RNCC: 6 | RNVC: 9
074ZF-017: RNCC: 6 | RNVC: 9

2 Oct 2007

5340-99-562-7136
Mounting Bracket

995627136
21787-176: RNCC: 3 | RNVC: 2

27 Oct 2009

5340-99-152-7840
Mounting Bracket

991527840
EA6422D548-045: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-99-758-6770
Spring Tension Clip

997586770
MBEU-90660: RNCC: 3 | RNVC: 2
BMBEU-90660: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-961-7913
Detent Plunger

999617913
MG1328: RNCC: 3 | RNVC: 2
C1MG1328: RNCC: 6 | RNVC: 9
7A2580: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-974-1242
Access Cover

999741242
MBEU82426: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-99-823-7641
Pin Drop End

998237641
FV664479: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-3943
Pipe Clip

998243943
79124: RNCC: 3 | RNVC: 2
(241)AE09579124: RNCC: 8 | RNVC: 2
79124: RNCC: 8 | RNVC: 2

25 Apr 1991

5340-99-612-1908
Access Cover

996121908
121E-18.400.03.1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-836-4278
Bracket

998364278
561/2/28024/000: RNCC: 3 | RNVC: 2

8 May 2006

5340-99-207-0085
Retaining Band

992070085
GM/B/46820: RNCC: 3 | RNVC: 2
OE-B-5397: RNCC: 5 | RNVC: 2
807469: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-752-2226
Rubber Bumper

997522226
3201-66528-20-3: RNCC: 3 | RNVC: 2
3201-66530-40-4: RNCC: 5 | RNVC: 1
WES-2380-4: RNCC: 5 | RNVC: 1
418: RNCC: 5 | RNVC: 1
WES-2378-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-215-3479
Extension Drawer Slide

992153479
5012 TN: RNCC: 3 | RNVC: 1
5012 TN 400 MM: RNCC: 5 | RNVC: 1
5012 TN 400 MM CL: RNCC: 5 | RNVC: 1
5012 TN 400 MM CL LEFT HAND: RNCC: 5 | RNVC: 2
5012 TN 400 MM CL LH: RNCC: 5 | RNVC: 2
61/11738: RNCC: 5 | RNVC: 2
61/11738 LH: RNCC: 5 | RNVC: 2
61-3-3: RNCC: 6 | RNVC: 9

3 Feb 1993

5340-99-989-6068
Mounting Plate

999896068
P-971341-005: RNCC: 3 | RNVC: 2
P971341-005: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-99-797-3347
Mounting Bracket

997973347
TR3848-49: RNCC: 3 | RNVC: 2
TR3848-49: RNCC: 5 | RNVC: 9
DEF STAN 81-14: RNCC: 6 | RNVC: 9

14 Sep 1989

5340-99-957-4590
Plug

999574590
7097-81P: RNCC: 3 | RNVC: 2
LE441B3: RNCC: 6 | RNVC: 9
E022-292084: RNCC: 6 | RNVC: 9

16 Nov 1996

5340-99-147-5513
Access Cover

991475513
0064690-001: RNCC: 3 | RNVC: 2

2 Mar 2002

5340-99-572-5638
Quick Release Pin

995725638
52917C6GT25: RNCC: 3 | RNVC: 2
52917C6GT25: RNCC: 5 | RNVC: 2
85-690-3868: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-667-4812
Padlock

996674812
1K57A: RNCC: 3 | RNVC: 2
P63/520/003: RNCC: 5 | RNVC: 2

4 Nov 2009

5340-99-776-0416
Bail Handle

5340-99-640-1345
Loop Clamp

5340-99-451-6614
Butt Hinge

994516614
106111-1: RNCC: 3 | RNVC: 2
106111-1: RNCC: 5 | RNVC: 9
X2XBMS106111-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-902-3685
Insulating Ring

999023685
N.185932: RNCC: 3 | RNVC: 2
042RV-209: RNCC: 6 | RNVC: 9

14 Aug 1997

5340-99-551-2646
Butt Hinge

995512646
03088: RNCC: 3 | RNVC: 2
250123: RNCC: 5 | RNVC: 2

12 Dec 1995

5340-99-354-0653
Mending Plate

993540653
FV2280422: RNCC: 3 | RNVC: 2

30 Jul 2007

5340-99-438-1829
Dust And Moisture Seal Protective Cap

994381829
1129A: RNCC: 3 | RNVC: 2
CX116994PT8: RNCC: 5 | RNVC: 2
37F25314: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-607-9549
Fusible Plug Insert

996079549
AH081979: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-256-9478
Rod End Clevis

992569478
EU75181: RNCC: 3 | RNVC: 2

21 Dec 1988

5340-99-354-0335
Rod End Clevis

993540335
110084-1413: RNCC: 3 | RNVC: 2
26VC-3384: RNCC: 6 | RNVC: 9

19 Mar 2002

5340-99-413-4832
Retaining Strap

994134832
FW1120: RNCC: 3 | RNVC: 2
FW1120: RNCC: 5 | RNVC: 9
42QR603: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-814-4798
Mounting Bracket

998144798
80013163-1: RNCC: 3 | RNVC: 2

20 May 2011

5340-99-577-1677
Dust And Moisture Seal Protective Cap

995771677
110228-9: RNCC: 3 | RNVC: 2
26VC-9981: RNCC: 6 | RNVC: 9

22 Jan 2002

5340-99-624-5995
Electrical-Mec Post

5340-99-730-7277
Loop Clamp

5340-99-618-0012
Electrical-Mec Post

5340-99-633-1380

5340-99-226-0149
Mounting Bracket

992260149
377-320-006: RNCC: 3 | RNVC: 2
SPCISR 9/2/101/5/3: RNCC: 6 | RNVC: 9

14 Jul 2008

5340-99-980-9262
Rod End Clevis

999809262
100401-8427-009: RNCC: 3 | RNVC: 2
100401-8427-009: RNCC: 5 | RNVC: 2

9 Jan 2013

5340-99-460-8914
Angle Bracket

994608914
AML55423: RNCC: 3 | RNVC: 2
HU01-160: RNCC: 5 | RNVC: 2
27SG494: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-656-0389
General Purpose Resilient Mount

996560389
10-02839-01: RNCC: 3 | RNVC: 2
16327: RNCC: 5 | RNVC: 2
15-01361-000: RNCC: 5 | RNVC: 2
Y105 841 10: RNCC: 5 | RNVC: 2
17-1380-01: RNCC: 5 | RNVC: 9
17-1380-1MN60: RNCC: 5 | RNVC: 9
17-1380: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-651-9996
Electrical-Mec Post

996519996
3854-36491: RNCC: 3 | RNVC: 2
A3854-36491: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-874-7597
Spacing Threaded Standoff

998747597
SH635: RNCC: 3 | RNVC: 2
Z273000/AH: RNCC: 5 | RNVC: 2

4 Mar 2003

5340-99-666-6586
Panel

996666586
14 E 201655 ITEM R1: RNCC: 3 | RNVC: 2
14 E 201655/R1: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-99-406-7384
Timer

994067384
STAR X 022 X SAD XA: RNCC: 3 | RNVC: 2
SR1156/8: RNCC: 5 | RNVC: 2
868-94/35: RNCC: 6 | RNVC: 9

2 Dec 1997

5340-99-749-1380
Section Block Clamp

997491380
D1257/42101: RNCC: 3 | RNVC: 2
D1257/42101: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-99-198-4143
Runner

991984143
110142-25374: RNCC: 3 | RNVC: 2

7 Oct 1992

5340-99-372-4421
Lock Button

993724421
1203219-9: RNCC: 3 | RNVC: 2
CV123180: RNCC: 5 | RNVC: 2
1203219-9: RNCC: 5 | RNVC: 2

12 Jun 2007

5340-99-942-8662
Plain Solid Disk

999428662
FW1009-6: RNCC: 3 | RNVC: 2
FW1009-6: RNCC: 5 | RNVC: 9
42QR666: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-255-6705
Dust And Moisture Seal Protective Plug

992556705
PT5562-3-650028: RNCC: 3 | RNVC: 2

29 Nov 1988

5340-99-198-0982

5340-99-402-3922

5340-99-406-7869

5340-99-192-3927
Retaining Strap

5340-99-837-7329

5340-99-408-7764

5340-99-352-8137
Snap Hook

5340-99-341-3894
Clamp

993413894
FV 2191607: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-99-209-9127
Double Angl Bracket

992099127
36562318: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-417-8856
Manifold Block

994178856
DM46264: RNCC: 3 | RNVC: 2

21 Feb 2007

5340-99-828-5503
Silencer Strap

998285503
9966474: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-0688
Loop Clamp

998280688
FV 834639: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-752-1107
Dust And Moisture Seal Protective Cover

997521107
LOT84186: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-99-754-6405
Retaining Strap

997546405
NHF995: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-752-0108
Spring Holder

997520108
45414588: RNCC: 3 | RNVC: 2

31 May 1991

5340-99-754-2101
Locking Stay

997542101
71878: RNCC: 3 | RNVC: 2

23 May 2011

5340-99-760-4964
Strap

997604964
RTB1402: RNCC: 3 | RNVC: 2
RTB1402: RNCC: 5 | RNVC: 2
25ZN82244ZK1H017: RNCC: 6 | RNVC: 9

28 Jul 1983

5340-99-748-2972
General Purpose Access Door

997482972
353 8129-801: RNCC: 3 | RNVC: 2
FK980540001: RNCC: 6 | RNVC: 9

4 Jun 1998

5340-99-748-0385
Retaining Band

997480385
91047360: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-758-1751
Nut And Bolt Locking Plate

997581751
ERC7321: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-8689
Bracket Assy

995628689
M5725829700000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-205-2998
Headless Straight Rod

992052998
2503001: RNCC: 3 | RNVC: 9
T3125R6888: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-793-7064
Plate

5340-99-781-0393

5340-99-808-0906

5340-99-761-1217
Mounting Plate

5340-99-786-4900
Roller Pin Assembly

5340-99-287-2621
Mounting Bracket

992872621
GD00490536: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-99-763-2601
Fork End

5340-99-838-3957
Resilient Mount

5340-99-665-3215
Hook

996653215
NO PRIMARY REF 99-665-3215: RNCC: 3 | RNVC: 2
5667163: RNCC: 5 | RNVC: 2
C581-LWR011172: RNCC: 6 | RNVC: 9

26 Jun 2001

5340-99-579-1667
Retainer

995791667
NO PRIMARY REF 99-579-1667: RNCC: 3 | RNVC: 2
3070837: RNCC: 5 | RNVC: 2
C581-LWM023405: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-729-5156
Float Assembly

997295156
NO PRIMARY REF 99-729-5156: RNCC: 3 | RNVC: 2
F83: RNCC: 5 | RNVC: 2
F83: RNCC: 5 | RNVC: 9

18 Dec 2009

5340-99-203-1379
Expansion Plug

992031379
NO PRIMARY REF 99-203-1379: RNCC: 3 | RNVC: 2
551595: RNCC: 5 | RNVC: 2
3A5110: RNCC: 6 | RNVC: 9

6 Aug 1988

5340-99-101-2301
General Purpose Resilient Mount

991012301
17-4051MN70: RNCC: 3 | RNVC: 2
1FVEN33699: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-500-3936
Mounting Bracket

995003936
75A325226-1001: RNCC: 3 | RNVC: 2
75A325226: RNCC: 5 | RNVC: 1

13 Dec 1995

5340-99-969-1867
Manual Control Lever

999691867
B161665: RNCC: 3 | RNVC: 2
NB-16-1665: RNCC: 5 | RNVC: 2

18 Aug 1994

Load More Results