What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 74 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 74 of 368

5340-99-605-2632
Nut And Bolt Locking Plate

996052632
FV 1026487: RNCC: 3 | RNVC: 2
FV 1026487: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-99-679-7822
Mounting Bracket

996797822
2EFMR66469: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-148-0003
Mounting Plate

991480003
FV2273459: RNCC: 3 | RNVC: 2

10 May 2007

5340-99-617-6419
Dust And Moisture Seal Protective Cap

996176419
MBEU55288: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-619-2170
Fastener

996192170
C7937: RNCC: 3 | RNVC: 2
26PJ2081: RNCC: 6 | RNVC: 9

16 Jan 1986

5340-99-885-5522
Sp Retainer Bracket

998855522
A4044034: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-99-900-0791
Bumper

999000791
RRA504812: RNCC: 3 | RNVC: 2
RRA504812: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-108-7440
Angle Bracket

991087440
EU24474: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-588-1750
Rope Guide

995881750
FV 2199601: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-99-601-1356
Tubular Fairlead Half

996011356
6M4CF5433ND: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-167-4874
Spring Tension Clip

5340-99-729-6130
Aircraft Structural Component Bracket

997296130
EU5330B004-059: RNCC: 3 | RNVC: 2

1 Jun 2002

5340-99-400-1825
Sliding Sleeve

994001825
WK33326: RNCC: 3 | RNVC: 2
022X9-002: RNCC: 6 | RNVC: 9

14 Nov 2002

5340-99-430-5681
Bush

994305681
NO PRIMARY REF 99-430-5681: RNCC: 3 | RNVC: 2
E33403-32: RNCC: 5 | RNVC: 2
88211-202-589: RNCC: 6 | RNVC: 9

2 Feb 1977

5340-99-292-8317
Webbing Strap

992928317
00262-9000-009: RNCC: 3 | RNVC: 2
WE124E2: RNCC: 6 | RNVC: 9

27 Sep 1998

5340-99-525-2005
Retaining Strap

995252005
007502082-9M24DB: RNCC: 3 | RNVC: 2
DEFSTAN53-16: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-650-3103
Electrical-Mec Post

996503103
A50060-51: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-638-9825
Angle Bracket

996389825
688-2-03861: RNCC: 3 | RNVC: 2
688-2-03861: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-902-1656
Dust Plug

999021656
NO PRIMARY REF 99-902-1656: RNCC: 3 | RNVC: 2
B621-1537: RNCC: 5 | RNVC: 2
4F-8019206: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-633-8232
Cable Clamp

996338232
SD3241477: RNCC: 3 | RNVC: 2
29020-366-10: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-636-9599
General Purpose Resilient Mount

996369599
7002-3C: RNCC: 3 | RNVC: 2
7002J2A-AS: RNCC: 5 | RNVC: 2
7002-3C: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-659-1972
Angle Bracket

996591972
P910366-005: RNCC: 3 | RNVC: 2
P-910366-005: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-203-6769
Swivel Caster

992036769
TH5-4C1WRBTP2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-756-2870
Access Cover

997562870
LP2-1043: RNCC: 3 | RNVC: 2
H780-460252: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-973-1707
Cartridge

999731707
262990: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
H929-975185: RNCC: 6 | RNVC: 9

24 Apr 1996

5340-99-638-2098
Electrical-Mec Post

996382098
3513-120-9017: RNCC: 3 | RNVC: 2
3513-120-9017: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-827-3049
Dust And Moisture Seal Boot

998273049
20-69TCP: RNCC: 3 | RNVC: 2
3732-1395: RNCC: 5 | RNVC: 2
91067026: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-533-2593
General Purpose Resilient Mount

995332593
001005505: RNCC: 3 | RNVC: 2
0261.246BLAD1-7478: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-634-6887
Angle Bracket

996346887
SDA24014: RNCC: 3 | RNVC: 2
SDA240174: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-213-5847
Mounting Plate

992135847
AK20416H001: RNCC: 3 | RNVC: 2
CV174284: RNCC: 5 | RNVC: 2

7 Dec 2010

5340-99-204-6789
Protection Sleeve

992046789
IAC 4637: RNCC: 3 | RNVC: 2
IACB 46231: RNCC: 5 | RNVC: 2
MEXED268571TEM3: RNCC: 5 | RNVC: 2
MEXED268581TEM3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-104-3891
Loop Clamp

991043891
N12778: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-99-363-0973
Mounting Plate

993630973
8251949716: RNCC: 3 | RNVC: 2

4 Jan 2008

5340-99-522-8906
Dust And Moisture Seal Protective Plug

995228906
1585: RNCC: 3 | RNVC: 2
MOULD 1585: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-414-8876
Nut And Bolt Locking Plate

994148876
BA31374: RNCC: 3 | RNVC: 2
36VV1998: RNCC: 6 | RNVC: 9
36VV1998: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-339-6480
Mounting Bracket

993396480
276151191: RNCC: 3 | RNVC: 2
FV2297759: RNCC: 5 | RNVC: 2
FV2297759: RNCC: 5 | RNVC: 2

28 Jan 2009

5340-99-299-9669
Mounting Bracket

992999669
29885: RNCC: 3 | RNVC: 2

20 Aug 2008

5340-99-132-9659
Expansion Plug

991329659
E857010S: RNCC: 3 | RNVC: 2
1503885: RNCC: 5 | RNVC: 2
E857010S: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-719-0042
Angle Bracket

997190042
3AA10001: RNCC: 3 | RNVC: 2

3 Apr 1979

5340-99-501-0422
Mounting Bracket

995010422
25674561: RNCC: 3 | RNVC: 2
A2N25674561: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-99-113-4917
Pipe Hanger

991134917
C50-M-12: RNCC: 3 | RNVC: 1
001293350: RNCC: 5 | RNVC: 1
001293350 PART 170: RNCC: 5 | RNVC: 1
001293350/170: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000 PART 170: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000 SHEET 015-: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000/170: RNCC: 5 | RNVC: 1
C50: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-127-4780
Wire

991274780
454 6366-006: RNCC: 3 | RNVC: 2
454 6366-006: RNCC: 5 | RNVC: 2
FK9800W0001: RNCC: 6 | RNVC: 9

12 Mar 1998

5340-99-331-1427
Retaining Strap

993311427
11/454/3/10/4008: RNCC: 3 | RNVC: 2
ES111B2: RNCC: 6 | RNVC: 9

25 Apr 1995

5340-99-382-3773
Mounting Plate

993823773
11/454/11/94/10003: RNCC: 3 | RNVC: 2

6 Apr 1999

5340-99-227-3500
Mounting Bracket

992273500
WG1312-0484-102: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-99-702-5121
Double Angle Bracket

997025121
70-55-765: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-99-262-7407
Angle Bracket

992627407
377-450-014: RNCC: 3 | RNVC: 2
SPCISR 9/2/101/5/3: RNCC: 6 | RNVC: 9

18 Jul 2008

5340-99-722-4506
Rod End Connector

997224506
VS.1527/319/7: RNCC: 3 | RNVC: 2

14 Oct 1987

5340-99-571-2242
Angle Bracket

995712242
83203707: RNCC: 3 | RNVC: 2
GM-B-91906: RNCC: 5 | RNVC: 2
4F-7603707: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-643-9745
Angle Bracket

996439745
703-18B11453: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-99-500-2172
Angle Bracket

995002172
152/00215/100: RNCC: 3 | RNVC: 2
153/00315/100: RNCC: 5 | RNVC: 2

20 Feb 1995

5340-99-096-4335
Handwheel

990964335
LF1156-191-FDTC: RNCC: 3 | RNVC: 2
LF1156-191: RNCC: 5 | RNVC: 1
LF1156: RNCC: 5 | RNVC: 1

6 Jun 1996

5340-99-213-6770
Mounting Bracket

992136770
80022785-01: RNCC: 3 | RNVC: 2
80022785-01: RNCC: 5 | RNVC: 9

29 Mar 2011

5340-99-182-6219
Mounting Bracket

991826219
WG1512-4119-101: RNCC: 3 | RNVC: 2
105LP-009: RNCC: 6 | RNVC: 9

28 Apr 2009

5340-99-382-5297
Tilt Pump

993825297
1371013F: RNCC: 3 | RNVC: 2
05-00037-100: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-312-4562
Mounting Plate

993124562
100401-0030-002: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-99-288-7736
Mounting Bracket

992887736
EU5260B037-101: RNCC: 3 | RNVC: 2

25 Aug 2012

5340-99-127-2019
Retaining Strap

991272019
75-34-135: RNCC: 3 | RNVC: 2
0075135: RNCC: 5 | RNVC: 2

16 Feb 1999

5340-99-923-9374
Rubber Bushing

999239374
P0C2953: RNCC: 3 | RNVC: 1
P0C2953PATTERN 1235: RNCC: 5 | RNVC: 2
SDN001005506: RNCC: 5 | RNVC: 2
83.0A.107P01: RNCC: 5 | RNVC: 2
148028: RNCC: 5 | RNVC: 2
0413-1235: RNCC: 6 | RNVC: 9
0413-923-9374: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-103-8334
Groo Clamp Coupling

991038334
C6043-36H: RNCC: 3 | RNVC: 2
B237-1489: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-809-5382

5340-99-825-0000

5340-99-824-1527
Nonmetallic Bushing

5340-99-826-8641

5340-99-746-0541
Spring Tension Clip

997460541
SF7040: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-99-786-5419
Butt Hinge

997865419
0J0140097: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-9922
Boss

997869922
FV2103131: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-99-781-5497
General Purpose Resilient Mount

997815497
NAM2874: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-777-7924
Turnbuckle

997777924
FV958805: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-769-8341
Rod End Connector

997698341
EU 44869: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-5473
General Purpose Resilient Mount

997865473
CD12330: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-787-3676
Electrical-Mechanical Equipment Post

997873676
NJM028: RNCC: 3 | RNVC: 2
876AK7447: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-782-2030
Loop Clamp

997822030
3006640: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-480-8381
Rod End Clevis

994808381
GI 312 UNFF1: RNCC: 3 | RNVC: 2
10-30-550: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-99-321-1509
Mounting Plate

993211509
M2765005220000: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-99-428-7300
Hinge Spacer

994287300
D8234: RNCC: 3 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

10 Feb 2003

5340-99-893-0021
Loop Assembly Clamp

5340-99-221-0953
Angle Bracket

5340-99-422-2846

5340-99-894-8307
Electrical-Mec Post

5340-99-400-9539
Escutcheon Spindle

5340-99-300-6223
Mounting Plate

5340-99-969-1813
Retaining Strap

5340-99-490-4680
Mounting Plate

994904680
GRC-011454-FA: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-99-420-2983
Vee Clamp

994202983
C6043-32H: RNCC: 3 | RNVC: 2
ADA9108: RNCC: 5 | RNVC: 2
GMA60497: RNCC: 5 | RNVC: 2
4F6976: RNCC: 6 | RNVC: 9
26DK10292: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-154-3081
Mounting Plate

991543081
AB-05-02-31002: RNCC: 3 | RNVC: 2

6 Mar 2009

5340-99-401-1789
General Purpose Resilient Mount

994011789
17-1154-00: RNCC: 3 | RNVC: 2
17/1154: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-99-562-6535
Dust And Moisture Seal Protective Cap

995626535
10834: RNCC: 3 | RNVC: 2
WS9032-4001: RNCC: 5 | RNVC: 2

20 Apr 2007

5340-99-611-7133
Loop Clamp

996117133
VGS 380-1209: RNCC: 3 | RNVC: 2
VGS 380 MARK1209: RNCC: 5 | RNVC: 2
26VC-7463: RNCC: 6 | RNVC: 9

29 Jan 2002

5340-99-406-2000
Loop Clamp

994062000
AS486-20: RNCC: 2 | RNVC: 2
28E14141: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-255-6136
Eye Hook

992556136
TW661-130-32-01: RNCC: 3 | RNVC: 2

19 Dec 2011

5340-99-599-0128
Mounting Bracket

995990128
NO PRIMARY REF 99-599-0128: RNCC: 3 | RNVC: 2
ERR2850: RNCC: 5 | RNVC: 2
FJ9914L0040: RNCC: 6 | RNVC: 9
(241)AE095ERR2850: RNCC: 8 | RNVC: 2
ERR2850: RNCC: 8 | RNVC: 2

9 Jul 1999

5340-99-052-4648
Audio Balance Unit

990524648
T694/172: RNCC: 3 | RNVC: 2
1-07-1467/172: RNCC: 5 | RNVC: 2
A2/1-07-1467/172: RNCC: 5 | RNVC: 2

23 Jun 1995

5340-99-137-8130
Twinsert Assembly S

991378130
3183-4CNX5-81N: RNCC: 3 | RNVC: 2
B34007: RNCC: 5 | RNVC: 2
47Y4T306: RNCC: 6 | RNVC: 9

28 Nov 1989

5340-99-163-5810
Hinged Hasp

991635810
M-20470: RNCC: 3 | RNVC: 2
13H22733: RNCC: 5 | RNVC: 2

15 Jul 2003

5340-99-120-1952
Retaining Strap

991201952
SK2340722-1: RNCC: 3 | RNVC: 2
SK2340722-1: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-414-7500
Nut And Bolt Locking Plate

994147500
BA16614: RNCC: 3 | RNVC: 2
36VV337: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-600-5775
Retaining Strap

996005775
6M4S2737: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-350-5741
Dust And Moisture Seal Protective Plug

993505741
SR1813: RNCC: 3 | RNVC: 2
91001226: RNCC: 5 | RNVC: 2

2 Jan 2013

5340-99-112-6754
Nonmetallic Bushing

5340-99-112-3460
Mounting Bracket

991123460
FV 1017262: RNCC: 3 | RNVC: 2
FV 1017262: RNCC: 5 | RNVC: 2

18 May 1994

5340-99-534-5979
Handwheel

995345979
GZ638460: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-440-7004
Retaining Band

994407004
AH016110: RNCC: 3 | RNVC: 2
5UE6085: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-999-3315
Escutcheon Plate

5340-99-027-1001
Angle Bracket

5340-99-028-4701

5340-99-020-5879

5340-99-142-2810

5340-99-027-6584
Mo Bracket Assembly

5340-99-607-3736

5340-99-940-0701
Loop Clamp

999400701
XC391-14: RNCC: 3 | RNVC: 2
SSML9-20-1: RNCC: 4 | RNVC: 1
P87212-11: RNCC: 5 | RNVC: 2
DEFSTAN53-15: RNCC: 6 | RNVC: 9
Z1ZA41407: RNCC: 6 | RNVC: 9
10AR3709: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-197-2953
Plate

991972953
3990/36651: RNCC: 3 | RNVC: 2
A3990/36651: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-99-356-6059
Line Supporting Strap

993566059
41214-055-0: RNCC: 3 | RNVC: 2
WB2571-55: RNCC: 5 | RNVC: 9
26VC-14503: RNCC: 6 | RNVC: 9

8 Feb 2002

5340-99-814-3351
Anti-R Bar Assembly

998143351
13795-B: RNCC: 3 | RNVC: 2
13795: RNCC: 5 | RNVC: 2
91713210: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-99-790-8210
Rubber Bumper

997908210
2085-00086: RNCC: 3 | RNVC: 2
2085-00086-04-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-131-1913
Driving Chainwheel

991311913
KS-21296: RNCC: 3 | RNVC: 2
SR1771/4: RNCC: 5 | RNVC: 2
0896-85/2: RNCC: 6 | RNVC: 9

1 Dec 1997

5340-99-270-8573
Access Cover

992708573
NO PRIMARY REF 99-270-8573: RNCC: 3 | RNVC: 2
322-4338-9: RNCC: 5 | RNVC: 2

24 Aug 2012

5340-99-406-6601
Door Bracket

994066601
NO PRIMARY REF 99-406-6601: RNCC: 3 | RNVC: 2
6-4EC-2705A: RNCC: 5 | RNVC: 2
26DL12496: RNCC: 6 | RNVC: 9

23 Aug 2005

5340-99-755-2749
Angle Bracket

997552749
WD01-81-23498: RNCC: 3 | RNVC: 2

8 Jun 1983

5340-99-182-2711
Mounting Plate

991822711
ZJEF005690LOK-ITEM-052: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-99-344-3451
Sheave Guide

993443451
NO PRIMARY REF 99-344-3451: RNCC: 3 | RNVC: 2
5655743: RNCC: 5 | RNVC: 2
C581-LWM045100: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-807-4395
Retainer Clip

998074395
3812B066: RNCC: 3 | RNVC: 2

3 Mar 1995

5340-99-303-7202
Mounting Plate

993037202
14389313: RNCC: 3 | RNVC: 2
CV183244: RNCC: 5 | RNVC: 2
VOE14389313: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-99-301-7249
Mounting Bracket

993017249
MXK1646: RNCC: 3 | RNVC: 2
FJ961B40001: RNCC: 6 | RNVC: 9

8 Aug 1996

5340-99-623-8846
Spring Tension Clip

996238846
K138AF01: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-99-352-5818
Bracket

993525818
M5725812120100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-624-6297
Webbing Strap

996246297
047793: RNCC: 3 | RNVC: 2
D047793: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-553-5339
Lock Bar

995535339
40006778: RNCC: 3 | RNVC: 2

6 Jan 2012

5340-99-108-8761
Threaded End Tensioning Tie Rod

991088761
PU10039: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-718-6686
Double Angle Bracket

997186686
V102932: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-203-0604
Rod End Clevis

992030604
NO PRIMARY REF 99-203-0604: RNCC: 3 | RNVC: 2
2513578: RNCC: 5 | RNVC: 2
2513578: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-201-2555
Nut And Bolt Locking Plate

992012555
RPH43021: RNCC: 3 | RNVC: 2
678-193720: RNCC: 6 | RNVC: 9
H678-193720: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-967-5485
General Purpose Resilient Mount

999675485
5C1/158478: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-3276
Hinge

992123276
12470328: RNCC: 3 | RNVC: 2
TC08-042 ITEM 11: RNCC: 5 | RNVC: 1
TC08-042/11: RNCC: 5 | RNVC: 1
12470328: RNCC: 5 | RNVC: 2
15616750: RNCC: 5 | RNVC: 9
012HC0013: RNCC: 6 | RNVC: 9
99-665-3992: RNCC: 6 | RNVC: 9

26 Sep 2001

5340-99-051-8706
Turnbuckle

990518706
ER9416B024-101: RNCC: 3 | RNVC: 2
ER9416B024: RNCC: 5 | RNVC: 2
QE951ME8036: RNCC: 6 | RNVC: 9

28 Feb 1995

5340-99-343-1498
Mounting Bracket

993431498
EA5305G510-047: RNCC: 3 | RNVC: 2
1MEVGU0: RNCC: 6 | RNVC: 9

22 Jul 2004

5340-99-951-8965
Mounting Bracket

999518965
AC/13/5/1005: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-99-874-3625
Toggle

998743625
DNLP/SMO/0002: RNCC: 3 | RNVC: 2
D/DNLP/SMO/420/5/1: RNCC: 6 | RNVC: 9

13 Nov 1997

5340-99-496-0088
Access Door

994960088
AC/12/1/32000: RNCC: 3 | RNVC: 2
MM680A: RNCC: 5 | RNVC: 2

22 Jul 1992

5340-99-251-4655
Mounting Bracket

992514655
CH/M/148/4XX9/0004/25: RNCC: 3 | RNVC: 2
002508110: RNCC: 5 | RNVC: 1
CH/M/148/4XX9/0004 PART 240: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-761-4735
Manual Control Lever

997614735
836-1C: RNCC: 3 | RNVC: 2
836-1: RNCC: 5 | RNVC: 2
H814-500019: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-123-7367
Handwheel

991237367
AML 15647: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-451-8127

5340-99-152-5695
Bottom Cover

5340-99-828-5824

5340-99-451-8912

5340-99-450-0450
Circlip

5340-99-829-0170

5340-99-826-6776
Retaining Strap

5340-99-129-7699
Ratchet Strap

5340-99-277-9502
Mounting Bracket

992779502
1088911: RNCC: 3 | RNVC: 2
CV156151: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-99-465-3228
Block Clamp

994653228
AIR136168: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-194-2220
Mounting Bracket

991942220
AD31948: RNCC: 3 | RNVC: 2

23 Jun 1978

5340-99-131-6667
Mounting Bracket

991316667
CV66738: RNCC: 3 | RNVC: 2

2 Jun 2003

5340-99-152-5078
Housing

991525078
26741174: RNCC: 3 | RNVC: 2
4308190046: RNCC: 6 | RNVC: 9

27 Nov 1995

5340-99-314-6018
Sealing Plate

993146018
731637: RNCC: 3 | RNVC: 2

6 Jan 1997

5340-99-406-4649
Loop Clamp

994064649
119934: RNCC: 3 | RNVC: 2
61DB40493: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-480-8721
Sealing Plug Assembly

994808721
012504: RNCC: 3 | RNVC: 2

28 Feb 2012

5340-99-772-7496
Mounting Bracket

997727496
515981: RNCC: 3 | RNVC: 2
515981-1: RNCC: 5 | RNVC: 2
A1-515981: RNCC: 5 | RNVC: 2
A1-515981-1: RNCC: 5 | RNVC: 2
FJ970L40005: RNCC: 6 | RNVC: 9

13 Jun 1997

5340-99-864-8405
Coat And Hat Hook

998648405
142/01083: RNCC: 3 | RNVC: 2

18 Oct 2010

5340-99-439-0945
Mounting Bracket

994390945
WG1319-0034-045: RNCC: 3 | RNVC: 2

26 May 1994

5340-99-708-8683
Spring Tension Clip

997088683
110142-30609: RNCC: 3 | RNVC: 2
110142/30609: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-256-5602
Mounting Bracket

992565602
EU5342C612-055: RNCC: 3 | RNVC: 2

11 Oct 2008

5340-99-256-6519
Angle Bracket

992566519
M42375-610: RNCC: 3 | RNVC: 2
M42375-610-02: RNCC: 5 | RNVC: 2
42375-610: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-648-8013
Electrical-Mec Post

996488013
2100-3222-008: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-549-6726
Mounting Plate

995496726
EA6305G541-107: RNCC: 3 | RNVC: 2

26 Mar 2004

5340-99-433-6263
Spring

994336263
NO PRIMARY REF 99-433-6263: RNCC: 3 | RNVC: 2
4951-113: RNCC: 5 | RNVC: 2
88115-104-487: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-143-9575
Blank Key

991439575
NO PRIMARY REF 99-143-9575: RNCC: 3 | RNVC: 2
09-1008: RNCC: 5 | RNVC: 2
ZB2 BGO: RNCC: 5 | RNVC: 2
FL9909R0062: RNCC: 6 | RNVC: 9

26 May 1999

5340-99-476-6226
Clip

994766226
NO PRIMARY REF 99-476-6226: RNCC: 3 | RNVC: 2
WBPC10: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-99-720-4902

5340-99-725-6597

5340-99-722-7323

5340-99-728-9657
Fork End

5340-99-735-3977

5340-99-725-8518

5340-99-251-2834
Webbing Strap

992512834
P5173 186240: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-573-5545
Cover Assembly

995735545
83201196: RNCC: 3 | RNVC: 2
FF980HV: RNCC: 6 | RNVC: 9

17 Nov 1997

5340-99-160-4428
Angle Bracket

5340-99-299-0301
Stretcher

992990301
NO PRIMARY REF 99-299-0301: RNCC: 3 | RNVC: 2
3 TIER: RNCC: 5 | RNVC: 2
27HR7703834: RNCC: 6 | RNVC: 9

23 Apr 2002

5340-99-946-1351
Binding Sleeve

999461351
GW6452201-0091: RNCC: 3 | RNVC: 2
CXY5MMX1-41NP1NK: RNCC: 5 | RNVC: 2
NH50X1-41NP1NK: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-075-6675
Angle Bracket

990756675
ER2521B187-041: RNCC: 3 | RNVC: 2
951MEB594: RNCC: 6 | RNVC: 9

11 Jul 1995

5340-99-437-4626
Retaining Strap

994374626
N0D3204-707: RNCC: 3 | RNVC: 9
P1-14367-34: RNCC: 5 | RNVC: 1
126935: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-204-3645
Quick Release Pin

992043645
NO PRIMARY REF 99-204-3645: RNCC: 3 | RNVC: 2
MEXED26530PT106: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-437-2595
Retaining Strap

994372595
DWS2032-73: RNCC: 3 | RNVC: 9
91-36173: RNCC: 5 | RNVC: 2
88500-502-521: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-553-8913
Mounting Bracket

995538913
ER2400B004-041: RNCC: 3 | RNVC: 2

24 May 2013

5340-99-425-5909
Mortar Spring

994255909
NO PRIMARY REF 99-425-5909: RNCC: 3 | RNVC: 2
AME20443-18-120R20447-61-11: RNCC: 5 | RNVC: 2
88730-703-173: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-052-0931
Loop Clamp

990520931
AS46783-19: RNCC: 2 | RNVC: 2
AS46783: RNCC: 5 | RNVC: 1

6 Mar 1997

5340-99-496-6469
Mounting Plate

994966469
FV2273248: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-882-9296
Mounting Bracket

998829296
60209523: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-99-873-4403
Retaining Strap

998734403
S25NU12: RNCC: 3 | RNVC: 2
GNT 0011: RNCC: 5 | RNVC: 9
S25NU12: RNCC: 5 | RNVC: 9

26 Feb 1992

5340-99-873-7111
Mounting Bracket

998737111
M2915116220000: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-99-127-7465
Quick R Webbing Tie

991277465
C3281ITEM50R6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-702-1485
Dust And Moisture Seal Protective Cap

997021485
5-86-88: RNCC: 3 | RNVC: 2
9364101007: RNCC: 5 | RNVC: 2
FL9635J0173: RNCC: 6 | RNVC: 9

12 Jun 1996

5340-99-370-9910
Dust And Moisture Seal Protective Plug

993709910
15221-0349-0: RNCC: 3 | RNVC: 2
B01-R REFERENCE 020: RNCC: 5 | RNVC: 2
B01-R/020: RNCC: 5 | RNVC: 2
B01-R REFERENCE 020: RNCC: 5 | RNVC: 2
B01-R/020: RNCC: 5 | RNVC: 2
15221-0349-0: RNCC: 5 | RNVC: 2
B01-R REFERENCE 020: RNCC: 5 | RNVC: 2
B01-R/020: RNCC: 5 | RNVC: 2
15221-0349-0: RNCC: 5 | RNVC: 2

14 Nov 1994

5340-99-416-2269
Control Rod

994162269
EB8-47-651: RNCC: 3 | RNVC: 2
26FZ-32091: RNCC: 6 | RNVC: 9
26FZ32091: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-743-6027
Rod End Clevis

997436027
P-880092-021: RNCC: 3 | RNVC: 2
P880092-021: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-757-7513
Angle Bracket

997577513
A-210658-004: RNCC: 3 | RNVC: 2
A210658-004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-292-4993
Mortise Latch Set

992924993
NO PRIMARY REF 99-292-4993: RNCC: 3 | RNVC: 2
CV190359: RNCC: 5 | RNVC: 2
5795: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-99-459-6510
Block Fairlead Section

994596510
25CX1221-11A: RNCC: 3 | RNVC: 2
26TD6438: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-275-5192
Recline Unit Bracket

992755192
2A254-0593: RNCC: 3 | RNVC: 2

3 May 2006

5340-99-488-8557
Sheave Block Connec

994888557
RUBB/RES/79: RNCC: 3 | RNVC: 2

17 Aug 2010

5340-99-540-4517
Dirt And Liquid Deflector

995404517
NO PRIMARY REF 99-540-4517: RNCC: 3 | RNVC: 2
T431071: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-342-4234
General Purpose Resilient Mount

993424234
M2K74-00280: RNCC: 3 | RNVC: 2

20 May 2010

5340-99-613-2183
Spring Clamp

996132183
HL001507: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-99-830-7492
Gears Seal Retainer

998307492
7179261: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-812-6968
Retaining Ring

998126968
D1N471A60X2: RNCC: 3 | RNVC: 2
0300194: RNCC: 5 | RNVC: 2
300194: RNCC: 5 | RNVC: 2
0300194: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-1476
Electrical Con Clip

998291476
FV 566506: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-2481
Bumper

998292481
FV754078: RNCC: 3 | RNVC: 2
FV754078: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-2468
Rear Backing Plate

998292468
FV692492: RNCC: 3 | RNVC: 2
FV692492: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-827-2806
Loop Clamp

998272806
FV653525: RNCC: 3 | RNVC: 2
NX6X203: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-826-5598
Loop Clamp

998265598
FV577389: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-822-3784
Retaining Clip

998223784
SL187: RNCC: 3 | RNVC: 2
8819943: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-826-8696
Electrical Ha Guard

998268696
CV6231: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-951-9847
Angle Bracket

999519847
244191: RNCC: 3 | RNVC: 2

25 Aug 1978

5340-99-827-0169
Loop Clamp

998270169
FV 825368: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-822-5737
Detent Plunger

998225737
FV 668108: RNCC: 3 | RNVC: 2
UG1759: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-598-6627
Rim Lock

995986627
24.42.0403: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-99-639-6458
Dust And Moisture Seal Protective Cap

996396458
A160058: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-659-4446
Spacing Threaded Standoff

996594446
TE48566: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-406-2124
Loop Clamp

994062124
AS4581-1: RNCC: 2 | RNVC: 2
28E19170: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-438-1830
Dust And Moisture Seal Protective Cap

994381830
80405219: RNCC: 3 | RNVC: 2
CX116994-9: RNCC: 5 | RNVC: 9
37F25336: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-421-2297
Mounting Plate

994212297
FV 2111074: RNCC: 3 | RNVC: 2
FV 2111074: RNCC: 5 | RNVC: 2

4 Oct 1996

5340-99-998-8921

5340-99-999-9278

5340-99-999-4599

5340-99-333-0112
Mortise Latch

993330112
R4-30-42-501-10: RNCC: 3 | RNVC: 2
8251949510: RNCC: 5 | RNVC: 2

3 Jan 2008

5340-99-339-3928
Access Cover

993393928
EA6320G501-101: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-99-850-0759
Stowage Bar

998500759
007,534,647: RNCC: 3 | RNVC: 2
007,534,647: RNCC: 5 | RNVC: 2
NME1B/61929A: RNCC: 6 | RNVC: 9

16 Apr 2002

5340-99-806-6066
Access Cover

998066066
0886/003: RNCC: 3 | RNVC: 2

4 Sep 1991

5340-99-109-0486
Screw Thread Insert

991090486
UBS44-04: RNCC: 3 | RNVC: 2
00-468-5505: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-232-4623
Clip

992324623
1544775-102: RNCC: 3 | RNVC: 2
013BB-114: RNCC: 6 | RNVC: 9

15 Dec 2001

5340-99-462-6914
Engine Accessory Bracket

994626914
NJ192188: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-99-141-5045
Handle

991415045
58303: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-322-5717
Access Cover

993225717
276080620: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-99-735-0784

5340-99-106-8515

5340-99-716-3242

5340-99-721-0851
Resilient Mount

5340-99-105-5318

5340-99-775-3033

5340-99-708-9479

5340-99-745-6568
Electrical-Mec Post

5340-99-827-9578
Rod End Clevis

998279578
257260A: RNCC: 3 | RNVC: 2
AAU1702: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-797-9728
Friction Catch

997979728
4306: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-751-3230
Butt Hinge

997513230
FV 2068085: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-751-7711
Rod End Connector

997517711
Q18236: RNCC: 3 | RNVC: 2
ZDE9361: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-754-4261
Mounting Bracket

997544261
NRC1748: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-598-7608
Mounting Bracket

995987608
AM10041: RNCC: 3 | RNVC: 2

1 Sep 1995

5340-99-752-4104
Retaining Strap

997524104
953693: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-0660
Line Supporting Strap

998270660
27233-504: RNCC: 3 | RNVC: 2
91037131: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-798-1784
Mounting Plate

997981784
9001588: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-797-9724
Clamping Catch

997979724
4293: RNCC: 3 | RNVC: 2
C171: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-797-6051
Headless Straight Rod

997976051
8735117: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-798-2056
Webbing Strap

997982056
898225: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-0849
Dust And Moisture Seal Protective Cap-Plug

997950849
S107151: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-1246
Webbing Strap

997951246
038.063.01: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-99-499-9623
Loop Clamp

5340-99-595-4681
Rim Latch

5340-99-595-6303

5340-99-519-0989

5340-99-738-6989
Access Cover

997386989
A1221002-I: RNCC: 3 | RNVC: 2
020037972/001: RNCC: 5 | RNVC: 2

13 Jan 2011

5340-99-416-2178
Rod End Clevis

994162178
EEAS 131 MK 2: RNCC: 3 | RNVC: 2
26FZ-34377: RNCC: 6 | RNVC: 9
26FZ34377: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-120-1182
Split Tubular Clip

991201182
SCL1689-17-2-4: RNCC: 3 | RNVC: 2
BKA1255-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-512-2852
Mounting Plate

995122852
WG1381-1631-043: RNCC: 3 | RNVC: 2

16 Sep 2004

5340-99-136-5737
Webbing Strap

991365737
DDC27311TEM1: RNCC: 3 | RNVC: 1
M3MC7630: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-262-1489
Mounting Plate

992621489
FV2254011: RNCC: 3 | RNVC: 2

8 May 2007

5340-99-837-8001
Mechanical Stop

998378001
9244: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-99-833-4254
Catch Assembly

998334254
9966218: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-564-8799
Mounting Plate

995648799
HH2/MV4917: RNCC: 3 | RNVC: 2

17 Mar 1995

5340-99-833-2225
Section Block Clamp

998332225
110045SHT301: RNCC: 3 | RNVC: 2
26VC-12332: RNCC: 6 | RNVC: 9

8 Mar 2002

5340-99-498-9271
Sealing Plate

994989271
WG1581-2398-101: RNCC: 3 | RNVC: 2

13 Feb 2010

5340-99-310-0920
Clip

993100920
12YJ40289: RNCC: 3 | RNVC: 2
E022-937614: RNCC: 6 | RNVC: 9

12 Jan 1998

5340-99-851-4570
Access Cover

998514570
NO PRIMARY REF 99-851-4570: RNCC: 3 | RNVC: 2
00217387: RNCC: 5 | RNVC: 2
00799467: RNCC: 5 | RNVC: 2
00779776: RNCC: 5 | RNVC: 2

17 Jan 2001

5340-99-245-8255
Dust And Moisture Seal Protective Cap

992458255
456-172: RNCC: 3 | RNVC: 2
0025S-090: RNCC: 6 | RNVC: 9

20 Oct 2000

5340-99-075-4669
Bracket

990754669
3513-610-2344: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-99-401-5004
Insert

994015004
B372018L5: RNCC: 3 | RNVC: 2
E006-677: RNCC: 6 | RNVC: 9

26 Jan 1999

5340-99-277-2217
Rod End Clevis

992772217
555101900: RNCC: 3 | RNVC: 2
555-1019E.02: RNCC: 5 | RNVC: 2
CV130448: RNCC: 5 | RNVC: 2

30 Apr 2008

5340-99-421-9573
Turnbuckle

994219573
EA6705G556-041: RNCC: 3 | RNVC: 2
1MEVGE7: RNCC: 6 | RNVC: 9

10 Apr 2004

5340-99-553-2979
Mounting Plate

995532979
18847-150: RNCC: 3 | RNVC: 2
SPSCM/PPO/1086: RNCC: 6 | RNVC: 9

16 Aug 2007

5340-99-127-5444

5340-99-126-5468
Probe

5340-99-127-5490

5340-99-126-1132
Mounting Plate

5340-99-105-1333
Bushing Retaine Nut

5340-99-876-0475
Access Cover

998760475
GSP 610-2: RNCC: 3 | RNVC: 2

27 Sep 2003

5340-99-573-2216
Mounting Bracket

995732216
1300-9945-E: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-99-520-1336
Clamping Catch

5340-99-604-0128

5340-99-520-1289

5340-99-553-1506

5340-99-551-0542
Hinge

5340-99-661-8478
Cable Suppo Bracket

5340-99-660-9645
Screw Thread Insert

5340-99-143-8854

5340-99-144-5807
Dus Protective Plug

5340-99-143-5700

5340-99-143-4041

5340-99-664-7165

5340-99-172-9498
Top Cap

5340-99-142-2007

5340-99-143-5632

5340-99-661-6948
Loop Clamp

5340-99-661-2708
Rod End Clevis

5340-99-143-3130

5340-99-301-0385
Plug Special

993010385
F A230/56: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-99-557-9285
Access Cover

995579285
1547A: RNCC: 3 | RNVC: 2
482-247800: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-641-7573
Rod End Clevis

996417573
WG1312-1225-04101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-278-3702
Butt Hinge

992783702
451-680-006: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-99-629-9622
Dust And Moisture Seal Protective Cap

996299622
DSR1763-1002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-915-8303
Line Supporting Strap

999158303
5182-11-022: RNCC: 3 | RNVC: 2
T50R - RED: RNCC: 6 | RNVC: 9
219-954: RNCC: 6 | RNVC: 9

13 Aug 2010

5340-99-252-8856
Mounting Plate

992528856
65988CC: RNCC: 3 | RNVC: 2
A0/65988CC: RNCC: 5 | RNVC: 2
886AK8713: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-611-7054
Angle Bracket

996117054
110040-85: RNCC: 3 | RNVC: 2
110040: RNCC: 5 | RNVC: 1
XP98PI01073: RNCC: 6 | RNVC: 9

15 Mar 1999

5340-99-324-6204
Mounting Plate

993246204
33262-216: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-99-301-2248
Abutment Pad

993012248
EA2500V031-002: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-99-492-9645
Locking Stay

994929645
B355-VIP-0017: RNCC: 3 | RNVC: 2

17 Aug 2010

5340-99-558-6106
General Purpose Resilient Mount

995586106
20550: RNCC: 3 | RNVC: 2
K915-915233: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-197-3130
Mounting Bracket

991973130
WB5-40-707: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-99-372-3067
Mounting Plate

993723067
EU5620B047-101: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-99-551-5272
Rod End Clevis

995515272
WC5610A011-101: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-99-420-8207
Retaining Strap

994208207
3918P: RNCC: 3 | RNVC: 9
Z1ZA51752: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-395-9831
Mounting Bracket

993959831
FV2273960: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-99-828-5159
Retaining Strap

998285159
09612801: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9965
Mounting Bracket

998269965
FV1051760: RNCC: 3 | RNVC: 2
FT5225: RNCC: 5 | RNVC: 2

28 Jan 1983

5340-99-773-9847
Dust And Moisture Seal Protective Cap

997739847
CCMY6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-774-9205
Threaded End Tensioning Tie Rod

997749205
520000249: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-818-7282
Angle Bracket

998187282
8831807: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-819-4698
Access Cover

998194698
FV 661751: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-818-4310
Extension

998184310
6930718: RNCC: 3 | RNVC: 2
FF9526T0298: RNCC: 6 | RNVC: 9

6 Jul 1995

5340-99-819-4149
Plate

998194149
WSH1010165: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-99-812-8141
Spring Tension Clip

998128141
FV221804: RNCC: 3 | RNVC: 2
LV4FV221804: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-791-0861
Engine Accessory Bracket

997910861
JJ111723: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-796-3348
Spacing Threaded Standoff

997963348
NEM133: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-136-2788
Snap Hook

991362788
AL2363SH2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-701-3209
Arm

997013209
S25N034: RNCC: 3 | RNVC: 2
S25N034: RNCC: 5 | RNVC: 9

8 Apr 1992

5340-99-795-4479
Helical Compression Spring Seat

997954479
BM39378: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9273
Loop Clamp

998269273
FV.963270: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-99-828-3397
Webbing Strap

998283397
FV757832: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9422
Loop Clamp

998269422
FV937549: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-99-798-0268
Section Block Clamp

997980268
FV 2023126: RNCC: 3 | RNVC: 2
FV 2023126: RNCC: 5 | RNVC: 2

12 Jul 1985

5340-99-818-3733
Rigid Caster

998183733
VP9641: RNCC: 3 | RNVC: 2
FV 870232: RNCC: 5 | RNVC: 2

5 May 1993

5340-99-949-7526
Spring Tension Clip

999497526
K11902: RNCC: 3 | RNVC: 2
26NA11701: RNCC: 6 | RNVC: 9
36VV22087: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-930-5389
General Purpose Resilient Mount

999305389
E1E43S63ED: RNCC: 3 | RNVC: 2
ND199647: RNCC: 5 | RNVC: 2

14 May 1991

5340-99-951-8551
Rim Lock Set

999518551
ABR6401: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-912-2110
Runner

999122110
DPA1029: RNCC: 3 | RNVC: 2

20 Aug 1999

5340-99-360-4000
Handle Grip

993604000
10E06890: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-99-899-9344
Plate

998999344
11620: RNCC: 3 | RNVC: 2

27 Feb 2003

5340-99-883-8803
Angle Bracket

998838803
FV 2219139: RNCC: 3 | RNVC: 2
FG9707Z0010: RNCC: 6 | RNVC: 9

12 May 1997

5340-99-884-0167
Striker Plate

998840167
ARDM40387: RNCC: 3 | RNVC: 2

15 May 2004

5340-99-905-9748
Hinge

999059748
AS54779: RNCC: 3 | RNVC: 2

26 Nov 1996

5340-99-428-5089
Mounting Plate

994285089
FV 2214280: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-99-375-9522
Block

993759522
WSH1010169: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-99-370-8895
Detent Cover

993708895
P7514000091: RNCC: 3 | RNVC: 2
9392641: RNCC: 5 | RNVC: 2

31 May 1991

5340-99-812-7736
Spacing Threaded Standoff

998127736
A2N25669196: RNCC: 3 | RNVC: 2
25669196: RNCC: 5 | RNVC: 2

4 Sep 2008

5340-99-423-8394
Dust And Moisture Seal Protective Plug

994238394
ASPSK377: RNCC: 3 | RNVC: 2
563616: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-101-3318
Toggle Catch Hook

991013318
917: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-464-2011
Butt Hinge

994642011
K211587: RNCC: 3 | RNVC: 2
FL990BH0013: RNCC: 6 | RNVC: 9

13 Feb 1999

5340-99-133-5498
Foot

991335498
MBEU149356: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-99-802-5922
Engine Accessory Bracket

998025922
7169953: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-99-808-3195
Spring Tension Clip

998083195
187094: RNCC: 3 | RNVC: 2
CZB130W25: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-809-1916
Loop Clamp

998091916
A3897B1510E: RNCC: 3 | RNVC: 2
3897B1510E: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-100-6172

5340-99-819-5366
Mounting Plate

998195366
50033970: RNCC: 3 | RNVC: 2

8 May 2012

5340-99-297-8550
Dust And Moisture Seal Protective Cap

992978550
15383381: RNCC: 3 | RNVC: 2
STD/00107365: RNCC: 5 | RNVC: 1

23 Mar 2011

5340-99-623-9183
Spindle

996239183
132907 G: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
G006-298293: RNCC: 6 | RNVC: 9

17 Dec 1996

5340-99-392-2068
Mounting Plate

993922068
4.031-055.0: RNCC: 3 | RNVC: 2

17 Oct 2012

5340-99-618-5061
Retaining Strap

996185061
B688-2-03257: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-649-4452
Dust And Moisture Seal Protective Cap

996494452
MBEU 111626: RNCC: 3 | RNVC: 2
B-MBEU 111626: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-180-3529
Mounting Bracket

991803529
JJ115887: RNCC: 3 | RNVC: 2
022FV-285: RNCC: 6 | RNVC: 9

5 Sep 2002

5340-99-682-6368
Bow Handle

996826368
QB11267: RNCC: 3 | RNVC: 2
XP99PD01418: RNCC: 6 | RNVC: 9

23 Jun 1999

5340-99-667-5562
Handle Grip

996675562
GA & 2JRG G35PK: RNCC: 3 | RNVC: 2
010701 R1 DL02780: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-99-349-6001
Mounting Bracket

993496001
A7321380: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-99-911-7475
Loop Clamp

999117475
D03016 002 3: RNCC: 3 | RNVC: 2
D03016 002 3: RNCC: 5 | RNVC: 2

27 Jun 1994

5340-99-763-6406
Electrical-Mechanical Equipment Post

997636406
A-36-4211-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-9044
Track Stop

999589044
5356-A: RNCC: 3 | RNVC: 2

22 Oct 2013

5340-99-234-5681
Mounting Bracket

992345681
R054-0580: RNCC: 3 | RNVC: 2
R054-0580-PCD: RNCC: 5 | RNVC: 2

28 Apr 2011

5340-99-373-0517
Mounting Plate

993730517
FV 3024315: RNCC: 3 | RNVC: 2
FV 3024315: RNCC: 5 | RNVC: 2
BR90-48-48-21-0012: RNCC: 5 | RNVC: 2

30 Aug 1995

5340-99-813-2594
Mounting Bracket

998132594
WG1412-9067-102: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-99-812-8306
Flush Catch

998128306
EH200-032-142: RNCC: 3 | RNVC: 2

28 Apr 2009

5340-99-238-9451
Expansion Plug Assortment

992389451
NO PRIMARY REF 99-238-9451: RNCC: 3 | RNVC: 2
510-050: RNCC: 5 | RNVC: 2

3 Aug 2011

5340-99-806-0727
Electrical-Mec Post

998060727
14-A4 0043: RNCC: 3 | RNVC: 2
14A4-0043: RNCC: 5 | RNVC: 2

14 Sep 1989

5340-99-471-3808
Panel

994713808
14D 201655 ITEM R6: RNCC: 3 | RNVC: 2
14D 201655/R6: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-99-797-1619
Clamp

997971619
3280/24403: RNCC: 3 | RNVC: 2
B3280/24403: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-693-1104
Lever Assembly

996931104
WG1510-2337-042: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-99-803-2809
Block

998032809
V35-1125-50: RNCC: 3 | RNVC: 2
V35-1125-50: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-99-244-5127
Casing

992445127
450/10800: RNCC: 3 | RNVC: 2

3 May 2001

5340-99-279-8288
Mounting Plate

992798288
WR5320A007-043: RNCC: 3 | RNVC: 2

13 Apr 2001

5340-99-745-5166
Loop Clamp

997455166
FV 2193442/11: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-99-612-0150
Access Cover

996120150
121E38-007-010: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-362-3504
Mounting Bracket

993623504
A3-106856: RNCC: 3 | RNVC: 2

9 Mar 2006

5340-99-212-9495
Bracket

992129495
NO PRIMARY REF 99-212-9495: RNCC: 3 | RNVC: 2
G1Z1035E00: RNCC: 5 | RNVC: 2

26 Jun 2006

5340-99-477-3655
Surround

994773655
3990/66539: RNCC: 3 | RNVC: 2
B3990/66539: RNCC: 5 | RNVC: 2

16 May 1991

5340-99-370-9978
Angle Bracket

993709978
EA2920Z624-101: RNCC: 3 | RNVC: 2

28 Feb 1995

5340-99-585-8426
Tred Foot

995858426
NO PRIMARY REF 99-585-8426: RNCC: 3 | RNVC: 2
9948-0922-00: RNCC: 5 | RNVC: 2
C57870T259237: RNCC: 6 | RNVC: 9

26 Jun 2002

5340-99-153-0175
Access Cover

991530175
40007304: RNCC: 3 | RNVC: 2

19 Mar 2012

5340-99-606-0658
Shim

996060658
77067327: RNCC: 3 | RNVC: 2
Y77067327: RNCC: 5 | RNVC: 2

25 Apr 1991

Load More Results