5340-99-666-7344

JavaScript in your web browser . 5365-12-319-2280Ring Spacer5365123192280 123192280 0730 103 766 0066932
device assembly; and rectifier network, unitized. https//www.nsnlookup.com /fsg-53/fsc-5340/uk 5340-99-666-7344
Dust And Moisture Seal Protective Cap 99-666-7344Dust And Moisture Seal Protective Cap5340996667344 996667344

5935-01-006-6932 5935010066932 010066932 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

2945-16-006-6932 2945160066932 160066932 is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. for spin-on, base-mounted filtering devices with integral outer casings, see filter element, fluid. excludes air conditioner.

5365-27-006-6932 5365270066932 270066932 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5961-00-006-6932 5961000066932 000066932 is two or more diode semiconductor devices designed to function as a unit in changing alternating current to direct current. the diode devices are internally connected in series, and are permanently cased, encapsulated, potted, or molded together to form an inseparable unit. these units may be designed as either half-wave or full-wave rectifiers and may be mounted to form either single phase or three phase bridges. for interconnected items arranged in stack(s), see rectifier, semiconductor device. for items fabricated in the form of a monolithic or thin film structure that perform the function of a circuit, see integrated circuit (as modified). excludes semiconductor devices, unitized; semiconductor device assembly; and rectifier network, unitized.