5340-99-437-4626

1220-99-431-6793 1220994316793 994316793 POINTER,RELATIVE WI

1220-99-431-6198 1220994316198 994316198 SUGGESTED TARGET SP

25 Apr 1991 2040-99-458-9496 Vertical Roller DNC40-550BRNCC: 5 | RNVC: 2 | DAC: 4 25 Apr 1991 5340-99-437-4626

1240-12-152-8507 1240121528507 121528507 EINBLICKBAUGRUPPE

5310-99-664-2015 5310996642015 996642015 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.