What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 49 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 49 of 368

5340-99-451-3688
Resilient Mount

994513688
V020-500: RNCC: 3 | RNVC: 2
SPA14226: RNCC: 5 | RNVC: 2
A14040: RNCC: 5 | RNVC: 2
X2XB22466: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-423-1955
Mounting Plate

994231955
24837-191: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-111-5661
Resilient Mount

991115661
17/1492: RNCC: 3 | RNVC: 1
17-440: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-107-6856
Loop Clamp

991076856
SCF1312-20: RNCC: 3 | RNVC: 2
SCF131220: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-215-7275
Mounting Plate

992157275
110087-813: RNCC: 3 | RNVC: 2
26VC-20675: RNCC: 6 | RNVC: 9

2 Feb 2002

5340-99-568-5965
Mounting Bracket

995685965
236/A2151/103: RNCC: 3 | RNVC: 2

23 May 2002

5340-99-322-3548
Mounting Bracket

993223548
J92105681-401: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-99-805-0925
Loop Clamp

998050925
187064: RNCC: 3 | RNVC: 2
149LH: RNCC: 5 | RNVC: 2
271451003429: RNCC: 5 | RNVC: 2
24-530: RNCC: 5 | RNVC: 2
FV 2026617: RNCC: 5 | RNVC: 2
3409: RNCC: 5 | RNVC: 2
LU187064: RNCC: 6 | RNVC: 9
LV6MT4LU187064: RNCC: 6 | RNVC: 9
16E4053: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-813-2075
Pipe Hanger

998132075
70-40-9034: RNCC: 3 | RNVC: 2

28 Oct 2009

5340-99-814-3916
Mounting Plate

998143916
M024A0014-00: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-99-801-2243
Rim Lock

998012243
754LH: RNCC: 3 | RNVC: 2
0754/001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-337-6196
Mounting Bracket

993376196
WG1481-0802-041: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-99-888-3627
Diffuser

998883627
278341: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
G200-226509: RNCC: 6 | RNVC: 9

4 Dec 1996

5340-99-355-4319
Retaining Bail

993554319
M-T1-57-5085/3: RNCC: 3 | RNVC: 2
034A7-050: RNCC: 6 | RNVC: 9
26TS-7270314: RNCC: 6 | RNVC: 9

1 Dec 2003

5340-99-957-3528
Bumper

999573528
261500700: RNCC: 3 | RNVC: 2
3/VAR/30091: RNCC: 5 | RNVC: 1

19 Jul 2000

5340-99-720-9949
Butt Hinge Leaf

997209949
EA40-1R: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-937-1332
Retaining Strap

999371332
SSN.07/Y/275/S01/047: RNCC: 3 | RNVC: 2
Y/275/S01/047: RNCC: 5 | RNVC: 1
001147359: RNCC: 6 | RNVC: 9

23 Feb 2000

5340-99-822-4979
Retaining Ring

998224979
NO PRIMARY REF 99-822-4979: RNCC: 3 | RNVC: 2
223956: RNCC: 5 | RNVC: 9
M223956: RNCC: 5 | RNVC: 9
LV8REMGM223956: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-8985
Rod End Connector

996478985
NO PRIMARY REF 99-647-8985: RNCC: 3 | RNVC: 2
P-720069-405: RNCC: 5 | RNVC: 2
P720069-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-136-3788
Plate

991363788
365241-2103B: RNCC: 3 | RNVC: 2
SR0559/2: RNCC: 5 | RNVC: 2
267-96/2: RNCC: 6 | RNVC: 9

30 Jul 1997

5340-99-258-9354
Webbing Strap

992589354
4232/001: RNCC: 3 | RNVC: 2
4232/001: RNCC: 5 | RNVC: 2

30 May 2013

5340-99-330-0861
Mounting Bracket

993300861
P-912214-001: RNCC: 3 | RNVC: 2
P912214-001: RNCC: 5 | RNVC: 2

7 Sep 1999

5340-99-848-0060
Webbing Strap

998480060
E0201705200: RNCC: 3 | RNVC: 2
CJW 99/177 SHEET 2: RNCC: 5 | RNVC: 2
CJW 99/177/2: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9

26 Oct 1999

5340-99-795-4095
Lid

997954095
V35-2578-50: RNCC: 3 | RNVC: 2
FF9526T0083: RNCC: 6 | RNVC: 9

28 Jun 1995

5340-99-915-7289
Bow Handle

999157289
B17-18695: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-603-2091
Access Cover

996032091
C276150: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-604-1871
Access Cover

996041871
D288581: RNCC: 3 | RNVC: 2
D288581: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-833-0431
Ring

998330431
110055-1663: RNCC: 3 | RNVC: 2
26VC/14888: RNCC: 6 | RNVC: 9

24 Jan 2002

5340-99-114-0326
Retaining Strap

5340-99-105-0970

5340-99-105-1200

5340-99-105-8181

5340-99-465-8459
Blank Key

994658459
29G4241: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-133-5630
Mounting Bracket

991335630
UL23137: RNCC: 3 | RNVC: 2

4 Aug 2005

5340-99-613-9020
Manual Control Lever

996139020
853100213: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-99-488-9627
Bracket

994889627
M5725841220000: RNCC: 3 | RNVC: 2

11 May 2013

5340-99-347-9011
Mounting Plate

993479011
203695: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-99-114-3253
Locking Catch

5340-99-701-3009
Retaining Strap

997013009
FV3202966: RNCC: 3 | RNVC: 2
705413803: RNCC: 5 | RNVC: 2

4 Mar 1992

5340-99-562-8052
Mounting Bracket

995628052
66507-82: RNCC: 3 | RNVC: 2

26 Aug 2010

5340-99-654-1759
Electrical-Mec Post

996541759
350-5168-07-07: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-99-248-5448
Access Cover

992485448
347/21037: RNCC: 3 | RNVC: 2
347/21037: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-99-881-9950

5340-99-870-6573
Headle Straight Rod

5340-99-736-6147

5340-99-742-5112

5340-99-743-5446
Spring Tension Clip

5340-99-140-3998

5340-99-140-7605

5340-99-140-1252
Plastics Bushing

5340-99-136-5755
Webbing Strap

5340-99-141-8547

5340-99-817-3847
Bumper

998173847
1417073: RNCC: 3 | RNVC: 2
3024E70230K11A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-6324
Mounting Plate

998346324
FV 2213598: RNCC: 3 | RNVC: 2

27 Jun 1995

5340-99-831-3677
Mounting Plate

998313677
PE13484: RNCC: 3 | RNVC: 2

2 Mar 2000

5340-99-651-4066
Turnbuckle Body

996514066
P-410503-001: RNCC: 3 | RNVC: 2
P410503-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-645-8028
Angle Bracket

996458028
P-910440-402: RNCC: 3 | RNVC: 2
P910440-402: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-762-5392
Retaining Strap

997625392
GM/A/3451: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-791-6696
Rod End Clevis

997916696
SSN.07/W/581/00/303/3: RNCC: 3 | RNVC: 2
W/581/00/303/3: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-755-1742
Dust And Moisture Seal Protective Cap

997551742
DPKA60: RNCC: 3 | RNVC: 2
VA-7-0192-1: RNCC: 7 | RNVC: 2

25 Apr 1991

5340-99-615-0709
Hinge Bracket

996150709
KB571L0317-000: RNCC: 3 | RNVC: 2
KB571L0317-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-507-2967
Access Cover

995072967
2A326-0515K1: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-99-635-0973
Bracket

996350973
MBEU-91508: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-99-322-3528
Spacing Threaded Standoff

993223528
B3280-50759: RNCC: 3 | RNVC: 2
3280-50759: RNCC: 5 | RNVC: 2

16 Sep 2002

5340-99-711-6159
Extension Helical Spring

997116159
3022-258-195: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-213-5823
Webbing Strap

992135823
20579-176: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-99-612-8118
Loop Clamp

996128118
V65002-32: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-100-1580
Bent Leaf Spring

991001580
NO PRIMARY REF 99-100-1580: RNCC: 3 | RNVC: 2
B2068821ITEM3: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-99-500-7553
Plumber Block

995007553
NO PRIMARY REF 99-500-7553: RNCC: 3 | RNVC: 2
SN506: RNCC: 5 | RNVC: 2
B198-TT4447794: RNCC: 6 | RNVC: 9

10 Oct 2002

5340-99-477-5900
Access Cover

994775900
140-451656: RNCC: 3 | RNVC: 2
140DG451656: RNCC: 5 | RNVC: 9
V140DG451656: RNCC: 5 | RNVC: 9
140DL451656: RNCC: 6 | RNVC: 9
140PL451656: RNCC: 6 | RNVC: 9
Z140PL451656: RNCC: 6 | RNVC: 9

29 Jul 1993

5340-99-252-2147
Dust And Moisture Seal Protective Cap-Plug

992522147
3B56-51(VITON): RNCC: 3 | RNVC: 2
3B56-51: RNCC: 5 | RNVC: 1
UBK 105172-004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-248-4671
Retaining Strap

992484671
BM48829: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-99-813-2344
Helical Compression Spring Seat

998132344
41401909: RNCC: 3 | RNVC: 2
020170 R1 AS00071: RNCC: 5 | RNVC: 2

7 Jun 2010

5340-99-812-8388
Helical Compression Spring Seat

998128388
FV269906: RNCC: 3 | RNVC: 2
LV4FV269906: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-359-3766
Friction Catch

5340-99-204-6296
Quick Release Pin

5340-99-587-8556
Bracket

5340-99-457-7690

5340-99-449-2806

5340-99-591-2781
Latch

5340-99-517-3419
Mounting Plate

5340-99-599-0455
Loop Clamp

5340-99-622-3121
Bow Handle

5340-99-603-6070
Retaining Strap

5340-99-756-1344
Handwheel

5340-99-300-9657
Angle Bracket

993009657
MM 11568: RNCC: 3 | RNVC: 2
AC/12/10/1008: RNCC: 5 | RNVC: 2

24 Mar 1994

5340-99-560-0056
Helical Compression Spring Seat

995600056
B5805-2008: RNCC: 3 | RNVC: 1
EM31948 ITEM22: RNCC: 5 | RNVC: 1
B5805 ITEM2008: RNCC: 5 | RNVC: 1
QCA/B5805-2008: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-395-9531
Plain Solid Disc

993959531
110050-1633: RNCC: 3 | RNVC: 2
110050/1633: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-594-5207
Nut And Bolt Locking Plate

995945207
MR200(A4)6836: RNCC: 3 | RNVC: 2
MR200(A0)6598 ITEM 12: RNCC: 5 | RNVC: 2
MR200(A0)6598/12: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-759-6081
Retaining Band

997596081
HU002L0305-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-723-8503
Barrier

997238503
110136-2890: RNCC: 3 | RNVC: 2
26VC17982: RNCC: 6 | RNVC: 9

19 Feb 2002

5340-99-380-6398
Block Fairlead Section

993806398
ER2521B175-111: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-766-7840
Electrical-Mec Post

997667840
229-016370: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-161-4105
Lashing Ring

991614105
CAT310: RNCC: 3 | RNVC: 2
0132Y-010: RNCC: 6 | RNVC: 9

19 Nov 2001

5340-99-551-7907
Mounting Bracket

995517907
RUBB-RES-71: RNCC: 3 | RNVC: 2
49013: RNCC: 5 | RNVC: 2

20 Jan 2010

5340-99-170-5602
Dust And Moisture Seal Protective Plug

991705602
33990-204: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-99-652-3299
Screw Thread Insert

996523299
65-7059-140-02: RNCC: 3 | RNVC: 2
H38-1688-50: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-431-5805
Board Connection

994315805
NO PRIMARY REF 99-431-5805: RNCC: 3 | RNVC: 2
Q33109-021: RNCC: 5 | RNVC: 2
88101-100-398: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-471-2769
Crank Handle

994712769
HME 896: RNCC: 3 | RNVC: 2
CH01: RNCC: 5 | RNVC: 2
023SG-004: RNCC: 6 | RNVC: 9

2 Dec 2002

5340-99-133-7968
Dust And Moisture Seal Boot

991337968
920102/3: RNCC: 3 | RNVC: 2
5095-285: RNCC: 5 | RNVC: 2

30 Oct 2006

5340-99-537-4385
Dust And Moisture Seal Protective Cap

995374385
A1026: RNCC: 3 | RNVC: 2
100099-9005-095: RNCC: 5 | RNVC: 2
3073-251-6: RNCC: 5 | RNVC: 2
3073-9000-029: RNCC: 5 | RNVC: 2
999-4-35177-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-500-7338
Electrical-Mec Post

995007338
2071-11723: RNCC: 3 | RNVC: 2
2071-11723-20-3: RNCC: 5 | RNVC: 2
FF970LL0002: RNCC: 6 | RNVC: 9

12 Aug 1997

5340-99-757-7871
General Purpose Resilient Mount

997577871
A-211071-033: RNCC: 3 | RNVC: 2
A211071-033: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-684-4595
Rod End Connector

996844595
WG1383-0448-105: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-99-711-3466
Bushing

997113466
25NW57: RNCC: 3 | RNVC: 2
26TD-1439: RNCC: 6 | RNVC: 9
26TD1439: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-679-8493
Dashpot

996798493
MBCS4564: RNCC: 1 | RNVC: 2
01-06150060-023: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-99-796-5240
Rod End Clevis

997965240
65-111: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-380-6447
Access Cover

993806447
FV 2225679: RNCC: 3 | RNVC: 2
FV 2181075 ITEM 149: RNCC: 5 | RNVC: 2
FV 2181075/149: RNCC: 5 | RNVC: 2

9 Jun 1999

5340-99-960-6826
Plunger

999606826
MR11089: RNCC: 3 | RNVC: 2
P1/16089/15: RNCC: 5 | RNVC: 2
M3MR11089: RNCC: 6 | RNVC: 9
7E9606826: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-943-2265
Screw Thread Insert

999432265
AS6316-32: RNCC: 2 | RNVC: 2
SSML7-42: RNCC: 4 | RNVC: 1
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-912-8069
Spring Tension Clip

999128069
80-02-10-0053: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-801-4939
Retaining Strap

998014939
463993/16: RNCC: 3 | RNVC: 2
463993/16: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-131-8688
Plate Cover

991318688
WG1410-9023-155: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-99-353-0973
Bracket

993530973
M5755300120000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-270-8523
Belt-Strap Keeper

992708523
ASE03499: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-99-670-5477
Mounting Bracket

996705477
391-450-043: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-013-2556
Handwheel

990132556
7110: RNCC: 3 | RNVC: 2
SR1587/5: RNCC: 5 | RNVC: 2
0159-95/85: RNCC: 6 | RNVC: 9

19 Nov 1997

5340-99-734-6560
Tee Hinge

997346560
1037: RNCC: 3 | RNVC: 2
WDL1075-11 ITEM 41: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-741-4662
Mounting Plate

997414662
A-05281-04-3-T: RNCC: 3 | RNVC: 2
A-05281-04-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-667-0350
Mounting Plate

996670350
3-GA-1198/6/C ITEM 9: RNCC: 3 | RNVC: 2
3-GA-1198/6/C/9: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-99-925-8356
Mounting Bracket

999258356
24978-191: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-739-1282
Mounting Bracket

997391282
A-250109-001: RNCC: 3 | RNVC: 2
A250109-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-655-0794
Mounting Bracket

996550794
P-912483-409: RNCC: 3 | RNVC: 2
P912483-409: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-216-3883
Mounting Bracket

992163883
00010367: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-99-655-0932
Angle Bracket

996550932
200749736: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-798-0577
Butt Hinge

997980577
FV953063: RNCC: 3 | RNVC: 2
FV953063: RNCC: 5 | RNVC: 2
FV964680: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-797-2347
Angle Bracket

997972347
BDE2071: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-0188
Dust And Moisture Seal Protective Cap

997950188
S107222: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-849-9281
Engine Accessory Bracket

998499281
247085: RNCC: 3 | RNVC: 2
LV7RU247085: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-802-5896
Escutcheon Plate

998025896
FV591595: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-798-2055
Webbing Strap

997982055
898229: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-797-8832
Mortise Lock

997978832
3G110: RNCC: 3 | RNVC: 2
G1GA13918: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-851-7267
Bumper

998517267
AML44568: RNCC: 3 | RNVC: 2
XA0007I0054: RNCC: 6 | RNVC: 9
0007I-54: RNCC: 6 | RNVC: 9

7 Feb 2000

5340-99-915-4637
Dust And Moisture Seal Protective Cap

999154637
B10051: RNCC: 3 | RNVC: 2
10051: RNCC: 5 | RNVC: 2

29 Aug 2002

5340-99-795-1090
Manual Control Lever

997951090
1379116E405: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-99-795-0772
Dust And Moisture Seal Protective Cover

997950772
77850651: RNCC: 3 | RNVC: 2
X77850651: RNCC: 6 | RNVC: 9
36LL21044: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-803-4527
Dust And Moisture Seal Protective Plug

998034527
6373158: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-851-7291
Access Cover

998517291
FT020602: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-99-793-2882
Webbing Strap

997932882
NHF176: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-790-2258
Section Block Clamp

997902258
SL4857BRB8BRB: RNCC: 3 | RNVC: 2
SL4857: RNCC: 5 | RNVC: 1
7BRB8BRB SL4857: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-789-8282
Bow Handle

997898282
1093: RNCC: 3 | RNVC: 2
109301: RNCC: 5 | RNVC: 2
47711093: RNCC: 5 | RNVC: 2
X0163: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-790-2239
Section Block Clamp

997902239
SL4856BRB4D4BRB: RNCC: 3 | RNVC: 2
SL4856: RNCC: 5 | RNVC: 1
6BRB4D4BRB SL4856: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-788-5516
Rim Latch

997885516
100401-3040-ASY: RNCC: 3 | RNVC: 2
L77734: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-748-2872
Acceleration Panel

997482872
MBEU82790: RNCC: 3 | RNVC: 2

13 Jun 2005

5340-99-749-0916
Mounting Bracket

997490916
B21681: RNCC: 3 | RNVC: 2
1679791: RNCC: 5 | RNVC: 2
1679791: RNCC: 5 | RNVC: 2
106145010223: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-517-3006
Mounting Bracket

995173006
69302370: RNCC: 3 | RNVC: 2
FF962LN0021: RNCC: 6 | RNVC: 9

9 Jul 1996

5340-99-723-4317
Lever

5340-99-901-9964
Angle Bracket

999019964
LP740104: RNCC: 3 | RNVC: 2

25 Aug 1978

5340-99-888-3521
Angle Bracket

998883521
FV 2201013: RNCC: 3 | RNVC: 2
FV 2201013: RNCC: 5 | RNVC: 2
FV 2201013: RNCC: 6 | RNVC: 9

4 Apr 1995

5340-99-871-7974
Block Line Support

998717974
201593664: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-99-889-9384
Loop Clamp

998899384
BSA180: RNCC: 3 | RNVC: 2
91001494: RNCC: 5 | RNVC: 2

15 Mar 2013

5340-99-957-2648
Retaining Strap

999572648
FV 2154339: RNCC: 3 | RNVC: 2

15 Feb 1994

5340-99-527-1531
Mechanical Stop

5340-99-201-5495

5340-99-904-0509
Loop Clamp

999040509
MDS267A08: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-872-2179
Bracket

998722179
M5745876520100: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-906-7784
Access Cover

999067784
FV 758231: RNCC: 3 | RNVC: 2
FV 758231: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-99-255-8514
Rubber Bumper

992558514
HR/1/739081: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-137-7721
Dust And Moisture Seal Protective Plug

991377721
AGS2112-E: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
AGS2112E: RNCC: 5 | RNVC: 2
44X70001: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-781-8192
Manual Control Lever

997818192
P-211747-405: RNCC: 3 | RNVC: 2
P211747-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-777-1413
Access Cover

997771413
001280610/13: RNCC: 3 | RNVC: 1
M/142/90/0001/13: RNCC: 5 | RNVC: 1
M/142/90/0001/13 PART 202: RNCC: 5 | RNVC: 1
SSK/M/142/90/0001/13: RNCC: 5 | RNVC: 1
001280610/13 PART 202: RNCC: 5 | RNVC: 2
SSK/M/142/90/0001/13 PART 202: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-425-5911
Mortar Spring

994255911
NO PRIMARY REF 99-425-5911: RNCC: 3 | RNVC: 2
UCW20447-30-7: RNCC: 5 | RNVC: 2
88730-703-180: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-730-6395
Teles Drawer Runner

997306395
PT6036-1-703417-002: RNCC: 3 | RNVC: 2
PT6036-4-703417-002: RNCC: 5 | RNVC: 2
640/2/23923/002: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-654-5847
Mounting Bracket

996545847
P-915922-403: RNCC: 3 | RNVC: 2
P915922-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-748-1534
Manual Control Lever

997481534
P-890868-009: RNCC: 3 | RNVC: 2
P890868-009: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-432-8499
Stud Extractor

994328499
SR1550/5: RNCC: 3 | RNVC: 2
MSSELFGRIP3/16: RNCC: 6 | RNVC: 9
376-97/35: RNCC: 6 | RNVC: 9

16 Dec 1997

5340-99-269-3352
Loop Clamp

992693352
0059-3/ITEM 3: RNCC: 3 | RNVC: 2
10019008: RNCC: 6 | RNVC: 9

17 Nov 2010

5340-99-955-1067
Clamping Catch

999551067
NO PRIMARY REF 99-955-1067: RNCC: 3 | RNVC: 2
SSML7-25-1-F1G6: RNCC: 5 | RNVC: 2
SSML7-25-1: RNCC: 5 | RNVC: 2
F1G6: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-562-3282
Electrical-Mec Post

995623282
604/2/12915/001: RNCC: 3 | RNVC: 2
604/2/12915/001: RNCC: 5 | RNVC: 2

25 May 1993

5340-99-623-7837
Access Cover

996237837
AB/02/02/05006: RNCC: 3 | RNVC: 2
MM7353: RNCC: 6 | RNVC: 9

24 Dec 1992

5340-99-641-2633
Loop Clamp

996412633
WG1381-0329-161: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-615-5724
Access Cover

996155724
KB956K0123-000: RNCC: 3 | RNVC: 2
KB956K0123-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-388-6254
Extension Drawer Slide

993886254
61/152/31: RNCC: 3 | RNVC: 2
5012CN298,5MM: RNCC: 5 | RNVC: 2

8 Dec 2005

5340-99-898-0382
Aac Rad Haz Cover A

998980382
1300-6243: RNCC: 3 | RNVC: 2
1300-6243-D: RNCC: 6 | RNVC: 9

7 Jan 2006

5340-99-730-0404
Rod End Connector

997300404
001311443: RNCC: 3 | RNVC: 1
SSK/Y/324/40/S003/101: RNCC: 5 | RNVC: 1
Y/324/40/S003/101: RNCC: 5 | RNVC: 1
Y32440S003000 PART 101: RNCC: 5 | RNVC: 1
Y32440S003000/101: RNCC: 5 | RNVC: 1
SSKY32440S003000 PART 101: RNCC: 5 | RNVC: 2
SSKY32440S003000/101: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-417-9565
Hinge

994179565
NO PRIMARY REF 99-417-9565: RNCC: 3 | RNVC: 2
29G2113: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-950-2594
Block Clamp

999502594
SST/Y/782/33/S001/102 SHEET 001-: RNCC: 3 | RNVC: 1
SST/Y/782/33/S001/102: RNCC: 5 | RNVC: 1

21 Dec 1993

5340-99-332-1076
Block Fairlead Section

993321076
ER2521B091-107: RNCC: 3 | RNVC: 2
1MEV8YN: RNCC: 6 | RNVC: 9

9 Mar 2001

5340-99-665-5617
Block Clamp

996655617
110687-415: RNCC: 3 | RNVC: 2
26VC-21270: RNCC: 6 | RNVC: 9

12 Feb 2002

5340-99-957-2913
Mounting Bracket

999572913
EA9560B023-041: RNCC: 3 | RNVC: 2
941ME3137: RNCC: 6 | RNVC: 9

29 Aug 1994

5340-99-420-8569
Mounting Bracket

994208569
67-24-113: RNCC: 3 | RNVC: 2
0067113: RNCC: 5 | RNVC: 2

7 Feb 1999

5340-99-657-7644
Loop Clamp

996577644
FV964639-16: RNCC: 3 | RNVC: 2

29 Nov 1990

5340-99-250-2232
Butt Hinge

992502232
NO PRIMARY REF 99-250-2232: RNCC: 3 | RNVC: 2
809672-103-57: RNCC: 5 | RNVC: 2
809672-103-57: RNCC: 5 | RNVC: 9

19 Nov 2010

5340-99-975-3958
Loop Clamp

999753958
NO PRIMARY REF 99-975-3958: RNCC: 3 | RNVC: 2
29542220: RNCC: 5 | RNVC: 2
70-10-557: RNCC: 5 | RNVC: 2

4 Mar 2013

5340-99-400-6597
Block Fairlead Section

994006597
EB2810B005-107: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-99-958-2488
Mounting Bracket

999582488
UE0042-0381-ASY: RNCC: 3 | RNVC: 2
ASS-001558: RNCC: 5 | RNVC: 2

29 Jan 2008

5340-99-960-7581
Loop Clamp

999607581
0S82344: RNCC: 3 | RNVC: 2
EE176-1020: RNCC: 5 | RNVC: 2

8 Apr 1991

5340-99-814-6153
Retaining Band

998146153
FV195083: RNCC: 3 | RNVC: 2
LV9AHYFV195083: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-773-3435
Flush Lock

997733435
7624: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-99-501-0332
Bracket

995010332
M5755472320000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-553-8679
Plug

995538679
M5725036600000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-623-7238
Mounting Bracket

996237238
259/94300: RNCC: 3 | RNVC: 2

17 May 1991

5340-99-436-0555
Panel Mounting

994360555
1403-1M11AP221: RNCC: 3 | RNVC: 2
6C863: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-282-5543
Resilient Mount

5340-99-454-0557

5340-99-723-1501
Resilient Mount

5340-99-126-1263
Mounting Bracket

5340-99-454-0057

5340-99-721-1027

5340-99-206-6151
Retaining Strap

5340-99-644-1589
Drum Retaining Clip

5340-99-546-0716
Angle Bracket

5340-99-341-0665
Resilient Mount

5340-99-545-6469
Hose Clamp

5340-99-625-2792

5340-99-114-2504

5340-99-128-3339

5340-99-546-0576
Loop Clamp

5340-99-601-2295
Loop Clamp

5340-99-626-5080
Loop Clamp

5340-99-406-5170

5340-99-775-7044

5340-99-613-7453
Anode Subassembly

996137453
APB200-6-01: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-99-100-0356
S Instrument Clamps

991000356
NO PRIMARY REF 99-100-0356: RNCC: 3 | RNVC: 2
1TB53722: RNCC: 5 | RNVC: 9
XB14710: RNCC: 6 | RNVC: 9

1 Mar 1977

5340-99-757-3564
Mini-Clamping Cylin

997573564
RWT 15: RNCC: 3 | RNVC: 2
RWT-15-S: RNCC: 5 | RNVC: 2

22 Jun 1987

5340-99-977-7258
Dust And Moisture Seal Protective Plug

999777258
AS41913-08G: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-300-0926
Filler Cap And Stra

993000926
ELF3-40-1-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-756-1740
Retaining Clip

997561740
P-810497-001: RNCC: 3 | RNVC: 2
P810497-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-156-4423
Line Supporting Strap

991564423
LK3A/HS BLACK: RNCC: 3 | RNVC: 2
TY28M-0: RNCC: 3 | RNVC: 2
EE420-02-0: RNCC: 3 | RNVC: 2
EE420: RNCC: 5 | RNVC: 1
LK3AHSBLK: RNCC: 5 | RNVC: 2

16 Sep 1993

5340-99-558-3255
Handwheel

995583255
S362: RNCC: 3 | RNVC: 2
SV13: RNCC: 5 | RNVC: 1
B/S362: RNCC: 5 | RNVC: 2
H814-284791: RNCC: 6 | RNVC: 9
H814-703826: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-146-7848
Rod End Connector

991467848
WD01-84-90348: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-2616
Spindle

991472616
RJ142/16: RNCC: 3 | RNVC: 2

8 Feb 1996

5340-99-411-4124
Grooved Clamp Coupling

994114124
6299280-0725: RNCC: 3 | RNVC: 2
6299280: RNCC: 5 | RNVC: 1
6299280-0725: RNCC: 5 | RNVC: 2

16 Sep 1993

5340-99-787-7475
Handwheel

997877475
13/Y/573/0020/A001/000/29 ITEM4: RNCC: 3 | RNVC: 2
001206820: RNCC: 5 | RNVC: 1
004460800: RNCC: 5 | RNVC: 1
MX/00280/SL/001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-859-8101
Angle Bracket

998598101
341A76-5079-00: RNCC: 3 | RNVC: 2

2 Nov 2006

5340-99-382-4694
Mounting Bracket

993824694
WG1557-0168-041: RNCC: 3 | RNVC: 2

13 Aug 2008

5340-99-984-8092
Manual Control Lever

999848092
WDS6821-204: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-99-875-6977
Runner

998756977
EA5610A086-042: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-987-5272
Filler Opening Cap

999875272
7672-802-107: RNCC: 3 | RNVC: 2
STC3075: RNCC: 5 | RNVC: 2

22 May 1996

5340-99-985-2097
Mounting Bracket

999852097
EA5240B155-104: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-99-990-8682
Access Door

999908682
HLT-1011: RNCC: 3 | RNVC: 2

21 Dec 1994

5340-99-666-1151
Cleat Assembly

996661151
WG1312-0857-049: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-99-419-4691
Check Spring

994194691
NO PRIMARY REF 99-419-4691: RNCC: 3 | RNVC: 2
UD47392: RNCC: 5 | RNVC: 2
0633-806177: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-780-7847
Access Cover

997807847
950-05-16-454: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-99-993-8769
Bonding Strap

999938769
572-02530-64: RNCC: 3 | RNVC: 2

26 Sep 1992

5340-99-629-0149
Loop Clamp

996290149
MPS3252-25D: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-549-7506
Block Clamp

995497506
MX/00087/AL/125: RNCC: 3 | RNVC: 2
004470699: RNCC: 5 | RNVC: 2

18 Oct 1994

5340-99-738-5486
Loop Clamp

997385486
110087-4787: RNCC: 3 | RNVC: 2
26VC-21381: RNCC: 6 | RNVC: 9

12 Feb 2002

5340-99-911-2131
Pad Holder Assembly

999112131
G414/4582/44: RNCC: 3 | RNVC: 2
G414/4582 ITEM 44: RNCC: 5 | RNVC: 2

13 Jul 2004

5340-99-744-8011
Mounting Bracket

997448011
A-620333-003: RNCC: 3 | RNVC: 2
A620333-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-976-1906
Manual Control Handle

999761906
S3S18424034: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-99-420-5770
Loop Clamp

994205770
UP70279: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-500-4853
Spacing Threaded Standoff

995004853
S3S18139163: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-99-391-0224
Mounting Plate

993910224
0700D12001-041: RNCC: 3 | RNVC: 2
0700D12001 ITEM 2: RNCC: 5 | RNVC: 2
0700D12001/2: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-99-216-0905
Helical Compression Spring Seat

992160905
N013-5: RNCC: 3 | RNVC: 1
SKT3579 ITEM 26: RNCC: 5 | RNVC: 2
SKT3579/26: RNCC: 5 | RNVC: 2

30 May 2012

5340-99-650-4707
Mounting Plate

996504707
P-530383-001: RNCC: 3 | RNVC: 2
P530383-001: RNCC: 5 | RNVC: 2

27 Mar 1979

5340-99-350-8786
Left Hand Door

993508786
561/1/29367/000: RNCC: 3 | RNVC: 2

8 May 2006

5340-99-254-1250
Retaining Strap

992541250
C322358/89: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-252-6506
Welded Assem Locker

992526506
561/1/29348/000: RNCC: 3 | RNVC: 2

8 May 2006

5340-99-300-9931
Electrical-Mec Post

993009931
6040-528: RNCC: 3 | RNVC: 2
Y6040-528: RNCC: 5 | RNVC: 2

25 Apr 1994

5340-99-148-3316
Helical Compression Spring Retainer

991483316
CH648-168: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-474-5292
Swivel Caster

994745292
GT-6SUB-BR: RNCC: 3 | RNVC: 2

22 Sep 2001

5340-99-870-0249
Seat Retainer

998700249
Z010101: RNCC: 3 | RNVC: 2
NBC-010-ND-101: RNCC: 5 | RNVC: 2

2 Mar 1993

5340-99-955-9515
Dust And Moisture Seal Boot

999559515
A16-42984: RNCC: 3 | RNVC: 2

12 Jul 1979

5340-99-056-3294
Side Member Assembl

990563294
3513-604-1189: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-99-613-3201
Bow Handle

996133201
EC5620B043-101: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-99-650-6841
Angle Bracket

996506841
P-410820-011: RNCC: 3 | RNVC: 2
P410820-011: RNCC: 5 | RNVC: 2

12 Mar 1991

5340-99-916-7827
Access Cover

999167827
123/06356: RNCC: 3 | RNVC: 2
93-916-7827: RNCC: 6 | RNVC: 9

3 Aug 2011

5340-99-386-7433
Angle Bracket

993867433
123/01568: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-99-168-9562
Access Cover

991689562
L300975/53: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-99-330-2613
Cable Shroud

993302613
GD600910-01: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-99-143-6674
Filler Opening Cap

991436674
A184079: RNCC: 3 | RNVC: 2
9920I0004: RNCC: 6 | RNVC: 9

8 Oct 1999

5340-99-543-3461
Dust And Moisture Seal Protective Cap-Plug

995433461
109: RNCC: 3 | RNVC: 2
APR109: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-149-3731
Spring Tension Clip

991493731
110136-11227: RNCC: 3 | RNVC: 2
110136-11227: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-376-9432
Mending Plate

993769432
5292495: RNCC: 3 | RNVC: 2

13 May 2011

5340-99-500-8095
Rad And Silen Cover

995008095
160.44.000.004: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-99-424-2631
Rod End Connector

994242631
F218197: RNCC: 3 | RNVC: 2
F218197: RNCC: 5 | RNVC: 9
26FX9047: RNCC: 6 | RNVC: 9
26FX9047: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-139-3422

5340-99-139-3577

5340-99-149-2217
Access Cover

991492217
259/27202: RNCC: 3 | RNVC: 2

8 Aug 1991

5340-99-736-2469

5340-99-736-2455

5340-99-916-9943
Mounting Assembly

999169943
197/001248/0: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-99-832-3408
Angle Bracket

998323408
ASR1116: RNCC: 3 | RNVC: 2
FJ9615L1518: RNCC: 6 | RNVC: 9
ASR1116-L: RNCC: 8 | RNVC: 1

15 Aug 1996

5340-99-144-8275
Access Cover

991448275
102476633: RNCC: 3 | RNVC: 2
1-02476-633: RNCC: 5 | RNVC: 2

19 May 1984

5340-99-136-2489
Webbing Strap

991362489
DDC2731: RNCC: 3 | RNVC: 1
DEFSTAN53-54: RNCC: 4 | RNVC: 1
M3MC8373: RNCC: 6 | RNVC: 9
SSML7-39: RNCC: 6 | RNVC: 9
FV689472-15: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-811-3990
Mounting Bracket

998113990
FV2135633: RNCC: 3 | RNVC: 2
FV2135633: RNCC: 5 | RNVC: 2
CES P/46177/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-299-0824
Mounting Bracket

992990824
MDA2670 ISS C: RNCC: 3 | RNVC: 2
MDA2670: RNCC: 5 | RNVC: 1
MDA2670-C: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-99-529-0046
Rod End Clevis

995290046
85-1-3-4-1039: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-174-5920
Double Angle Bracket

991745920
18811-176: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-99-146-8516
Angle Bracket

991468516
WD01-16-92119: RNCC: 3 | RNVC: 2
WD01-16-919621TEM52: RNCC: 5 | RNVC: 2
WD01-16-92119ND: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-219-8500
Prop Driver Pulley

992198500
24-03-08-A000: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-99-130-2012
Webbing Strap

991302012
8502-B: RNCC: 3 | RNVC: 2
8502: RNCC: 5 | RNVC: 2
992K90010: RNCC: 6 | RNVC: 9

16 Dec 1999

5340-99-707-3387
Mounting Plate

997073387
WG1413-0229-102: RNCC: 3 | RNVC: 2

27 Jul 2002

5340-99-385-4483
Rod Assembly

993854483
WG1510-2325-041: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-99-532-1339
Access Cover

995321339
S62-0504-03: RNCC: 3 | RNVC: 2
S62-0504: RNCC: 5 | RNVC: 1
WE112B1: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-341-4399
Mounting Bracket

993414399
FV2303455: RNCC: 3 | RNVC: 2
2 0175-498: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-99-558-4460
Manual Control Lever

995584460
1651-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-660-6413
Casement Fastener

996606413
M256/R129: RNCC: 3 | RNVC: 1

8 Jul 1993

5340-99-120-1229

5340-99-112-7588

5340-99-206-0190
Air Cowl Hinge

5340-99-740-9988

5340-99-738-7472
Loop Clamp

5340-99-113-2909
Rubber Bumper

5340-99-462-2680
Nonmetallic Bushing

5340-99-659-7824
Angle Bracket

996597824
P-913902-028: RNCC: 3 | RNVC: 2
P913902-028: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-165-7622
Webbing Strap

991657622
01861-1-OL2.5M-HS-TUB35-OL0.3M: RNCC: 3 | RNVC: 2
5/2250: RNCC: 5 | RNVC: 2
095026/3: RNCC: 5 | RNVC: 2
S/2250: RNCC: 6 | RNVC: 9

21 Mar 2001

5340-99-737-3781
Access Cover

997373781
P-212239-051: RNCC: 3 | RNVC: 2
P212239-051: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-657-9398
Electrical-Mec Post

996579398
P211506-031: RNCC: 3 | RNVC: 2
P-211506-031: RNCC: 5 | RNVC: 1

19 Sep 1989

5340-99-763-9992
Dust And Moisture Seal Protective Cap

997639992
DQ10-117: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-99-743-9894
Caster Wheel

997439894
D3460SFM02-012: RNCC: 3 | RNVC: 2

16 Nov 2010

5340-99-631-5261
Rim Clenching Clamp

996315261
3708-4312-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-764-1122
Extension Drawer Slide

997641122
1841-IK-DTL-02857: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-99-798-8757
Bow Handle

997988757
WG1319-0126-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-789-7150
Dust And Moisture Seal Protective Plug

997897150
HTE6432-15: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-895-4182
Lock Key

998954182
61402937-AA-001: RNCC: 3 | RNVC: 2

6 Dec 2003

5340-99-471-6843
Catch Strike

994716843
04-4000-SS-SF: RNCC: 3 | RNVC: 2

8 Jan 2013

5340-99-989-0855
Webbing Strap

999890855
FV 3024058: RNCC: 3 | RNVC: 2
BR90-44-50-90-0003: RNCC: 5 | RNVC: 2

22 Jul 1994

5340-99-901-6043
Spring Tension Clip

999016043
S7-60-4502XAA: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-902-2514
Mounting Bracket

999022514
NO PRIMARY REF 99-902-2514: RNCC: 3 | RNVC: 2
25MC134A: RNCC: 5 | RNVC: 2
26TD-7617: RNCC: 6 | RNVC: 9

23 May 2002

5340-99-739-7810
Mounting Bracket

997397810
KB956K0199-001S: RNCC: 3 | RNVC: 2
KB956K0199-001: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-779-7745
Mounting Bracket

997797745
WD5088-00302-049: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-554-8561
Handwheel

995548561
65139-04001: RNCC: 3 | RNVC: 2
85200-060771TEM12: RNCC: 5 | RNVC: 2
85200-06077-12: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-729-4568
Electrical-Mec Post

997294568
PT6036-4-703048: RNCC: 3 | RNVC: 2
640/2/25463: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-353-1007
Spade Stowage Assem

993531007
648811-00: RNCC: 3 | RNVC: 2

2 Nov 2012

5340-99-429-5581
Pad Eye

994295581
29497-214: RNCC: 3 | RNVC: 2

11 Feb 2011

5340-99-905-9751
Bellows

999059751
F306-362314: RNCC: 3 | RNVC: 2
H975-362314: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9
VSB709/WRL17287/4: RNCC: 6 | RNVC: 9

18 Dec 1996

5340-99-968-2235
Mounting Bracket

999682235
110016-27: RNCC: 3 | RNVC: 2
26VC-7350: RNCC: 6 | RNVC: 9

23 Jan 2002

5340-99-087-1417
Mounting Plate

990871417
503-2-08883-000: RNCC: 3 | RNVC: 2

23 Jun 1995

5340-99-714-1115
Butt Hinge

997141115
NO PRIMARY REF 99-714-1115: RNCC: 3 | RNVC: 2
N1399: RNCC: 5 | RNVC: 1
25N1399: RNCC: 5 | RNVC: 2

20 Dec 1971

5340-99-344-3902
Mechanical Stop

993443902
WG1500-0409-041: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-99-222-2397
Loop Clamp

992222397
AS491-115: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-168-5002
Hinge Pin

991685002
904802-0011-017: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-715-8249
Mounting Plate

997158249
WD01-81-22285: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-777-6515
Loop Clamp

997776515
SSN07/M/601/80/1/63AND64: RNCC: 3 | RNVC: 2
M/601/26/1/263AND264: RNCC: 5 | RNVC: 2
M/601/80/1/63AND64: RNCC: 5 | RNVC: 2
SSN13/M/601/26/1/263AND264: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-945-0077
Rim Clenching Clamp

999450077
NO PRIMARY REF 99-945-0077: RNCC: 3 | RNVC: 2
M2606214-1: RNCC: 5 | RNVC: 2
M2606214-1: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-495-6994
Sheet

994956994
5356C219: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-938-0878
Rod End Clevis

999380878
110582-2039: RNCC: 3 | RNVC: 2
26VC23119: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-957-4060
Hinge

999574060
91057363: RNCC: 3 | RNVC: 2
FJ9517E0187: RNCC: 6 | RNVC: 9

4 Dec 1995

5340-99-915-0061
Luggage Handle

999150061
11727: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-832-6842
Loop Clamp

998326842
91024535: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-831-3606
Retaining Strap

998313606
2H34: RNCC: 3 | RNVC: 9
LV7AN2H34: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-831-1656
Nonmetallic Bushing

998311656
FV769692: RNCC: 3 | RNVC: 2
ZBZB822158010987: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-787-3684
Mounting Plate

997873684
NKA339: RNCC: 3 | RNVC: 2
876AK7455: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-787-5062
Clamping Catch

997875062
B88868: RNCC: 1 | RNVC: 2
50-601SS: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-788-3383
Dust And Moisture Seal Protective Cover

997883383
JRA7576: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-914-5313
Retaining Strap

999145313
3413-802: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-836-0956
Rod End Connector

998360956
41021931: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-831-2329
Dust And Moisture Seal Boot

998312329
IM 2976: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-99-917-1015
Section Block Clamp

999171015
FV 2149206: RNCC: 3 | RNVC: 2
FV 2149206: RNCC: 5 | RNVC: 2

29 Aug 1991

5340-99-915-8066
Access Cover

999158066
12749022: RNCC: 3 | RNVC: 2
CV147664: RNCC: 5 | RNVC: 2
12749022: RNCC: 5 | RNVC: 2

8 May 2008

5340-99-083-1411
Mounting Bracket

990831411
LJ17641: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-99-223-0417
Butt Hinge

992230417
3042B4129: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-455-1874
Sleeve Spacer

5340-99-413-6693

5340-99-428-0497

5340-99-221-0987
Rim Clenching Clamp

5340-99-439-7287

5340-99-135-0967

5340-99-132-6681

5340-99-132-6721
Butt Hinge

5340-99-742-1276
Electrical-Mechanical Equipment Post

997421276
843369: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-755-4351
Block Fairlead

997554351
6M4P7523: RNCC: 3 | RNVC: 2
033QM-073: RNCC: 6 | RNVC: 9

16 Oct 2003

5340-99-784-6981
Engine Accessory Bracket

997846981
JJ110919: RNCC: 3 | RNVC: 2
JJ110919: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-761-1150
Helical Compression Spring Seat

997611150
ND31370: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-756-0046
Angle Bracket

997560046
FV1016720: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-99-838-2652

5340-99-737-5172
Loop Clamp

5340-99-768-5528
Resilient Mount

997685528
DZB4211: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-755-5829
Circlip

997555829
SB72: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-755-7073
Mounting Bracket

997557073
3641H005: RNCC: 3 | RNVC: 2
3641H005: RNCC: 5 | RNVC: 2

18 Jun 2003

5340-99-774-9195
Cable Mount Bracket

997749195
A4044031: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-99-760-8164
Rod End Connector

997608164
110050-1311: RNCC: 3 | RNVC: 2
110050-1311: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-946-7722
Dust And Moisture Seal Protective Cap

999467722
AVA64-7F: RNCC: 3 | RNVC: 1
AVA64-7F: RNCC: 5 | RNVC: 1
476-284455: RNCC: 6 | RNVC: 9
586-200604: RNCC: 6 | RNVC: 9
H586-946-7722: RNCC: 6 | RNVC: 9
27BA9467722: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-881-9212
Expansion Plug

998819212
Z5975-198: RNCC: 3 | RNVC: 2
LV6MT4CB5975-198: RNCC: 6 | RNVC: 9

25 Apr 1991

Load More Results