What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 47 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 47 of 368

5340-99-780-6432
Handwheel

5340-99-120-1926

5340-99-110-8267
Loop Clamp

5340-99-114-3254

5340-99-116-6318

5340-99-778-5050
Electrical-Mec Post

5340-99-115-3564

5340-99-115-6387

5340-99-766-9154

5340-99-605-4701
Hinge Bracket

5340-99-301-5310
Mounting Plate

5340-99-650-2082
Electrical-Mec Post

5340-99-113-2040
Nonmetallic Bushing

5340-99-758-7343
Headless Straight Rod

997587343
P-916373-005: RNCC: 3 | RNVC: 2
P916373-005: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-968-6740
Mounting Bracket

999686740
206/1099 ITEM 1: RNCC: 3 | RNVC: 2
206/1099/1: RNCC: 5 | RNVC: 2

19 Apr 2011

5340-99-112-9477
Dust And Moisture Seal Protective Plug

991129477
NO PRIMARY REF 99-112-9477: RNCC: 3 | RNVC: 2
22318-334D: RNCC: 5 | RNVC: 2
1450-14GREY: RNCC: 5 | RNVC: 2
418-4-98398-001: RNCC: 5 | RNVC: 2
3821BK4: RNCC: 5 | RNVC: 2
6126-0137: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-356-6031
Lo Cylinder And Key

993566031
H-37-4976-37: RNCC: 3 | RNVC: 2
H-37-4976 EDN.37: RNCC: 5 | RNVC: 2
H-37-4976-37IL: RNCC: 5 | RNVC: 2
WE101B1A: RNCC: 6 | RNVC: 9

8 Jul 1999

5340-99-832-7502
Heat Roller

998327502
SR1779/5: RNCC: 3 | RNVC: 2
1459-92/12: RNCC: 6 | RNVC: 9
2230986: RNCC: 6 | RNVC: 9

27 Oct 1997

5340-99-598-6434
Loop Clamp

995986434
VGS383-9: RNCC: 3 | RNVC: 2
26VC-13093: RNCC: 6 | RNVC: 9

14 Sep 2004

5340-99-753-1817
Leather Strap

997531817
CSDE/TOR/GSS18: RNCC: 3 | RNVC: 2
CSDE/MRCA/GSS18: RNCC: 5 | RNVC: 2
CSDE/MRCA/GSS18: RNCC: 6 | RNVC: 9
CSDE/TOR/GSS18: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-402-7778
Handwheel

994027778
8-1C68BC: RNCC: 3 | RNVC: 2
10-3-68: RNCC: 5 | RNVC: 2
LR8-1C68BC: RNCC: 5 | RNVC: 2
X3XCLR8-1C68BC: RNCC: 6 | RNVC: 9
42AA595: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-378-4338
Mounting Bracket

993784338
G417/4563: RNCC: 3 | RNVC: 2
G417/4563 ITEM 1: RNCC: 5 | RNVC: 2
G417/4563/1: RNCC: 5 | RNVC: 2

28 Mar 2002

5340-99-000-3049
Bit Panel Housing

990003049
60225-339: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-813-9838
Lock Spindle

998139838
7236-36039: RNCC: 3 | RNVC: 2
7236-36039-20: RNCC: 5 | RNVC: 2
7236-36039-20-2: RNCC: 5 | RNVC: 2
5035655: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-99-549-7889
Ratchet Lashing

995497889
01805-2-01224-OL1.1M-FLO.3M-TSB-: RNCC: 3 | RNVC: 1
DG0028722: RNCC: 5 | RNVC: 2
G0029720: RNCC: 5 | RNVC: 2

7 Aug 2004

5340-99-736-1223
Butt Hinge Leaf

997361223
P-810402-008: RNCC: 3 | RNVC: 2
P810402-008: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-461-0966
Access Cover

994610966
W1642-002-810: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-99-179-6856
Loop Clamp

991796856
FV964639/42: RNCC: 3 | RNVC: 2
FV964639/42: RNCC: 5 | RNVC: 2

14 Aug 1989

5340-99-338-4736
Latch

993384736
3/09282/RRA: RNCC: 3 | RNVC: 2
3/09282: RNCC: 5 | RNVC: 1

13 Nov 1997

5340-99-804-1590
Spring Tension Clip

998041590
NO PRIMARY REF 99-804-1590: RNCC: 3 | RNVC: 2
5933-33: RNCC: 5 | RNVC: 2
Y5933-33: RNCC: 5 | RNVC: 2
LV6MT4CB5933-33: RNCC: 6 | RNVC: 9

1 Mar 1977

5340-99-241-6837
Strap Hinge

992416837
096949: RNCC: 3 | RNVC: 2
5519-081 ITEM 1: RNCC: 5 | RNVC: 2
5519-081/1: RNCC: 5 | RNVC: 2
5519-108: RNCC: 5 | RNVC: 2

27 Sep 2007

5340-99-551-7205
Webbing Strap

995517205
S4NY-P-119: RNCC: 3 | RNVC: 2
70-70-603-42: RNCC: 5 | RNVC: 2

28 Jul 2009

5340-99-730-6465
Line Supporting Strap

997306465
B65550: RNCC: 1 | RNVC: 2
LK3A/HS-BLACK: RNCC: 3 | RNVC: 2
LK3AHSBLACK: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-750-9046
Mounting Plate

997509046
330E68-0091-21: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-524-7325
Packing Piece

995247325
RUA1524: RNCC: 3 | RNVC: 2
743-524-7325: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-612-8664
Bumper

996128664
121E23-781-03-00M02: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-146-7578
Double Angle Bracket

991467578
WD01-81-23799: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-629-5576
Handwheel

996295576
WG0183-0056-043: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-527-9626
Swivel Caster

995279626
XSQ13-590-17800: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-599-5339
Mounting Bracket

995995339
100402-1340-001: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-99-589-2433
Mechanic Equipment Hardware Kit

995892433
99/826081: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-99-937-2068
Mounting Plate

999372068
WA5610A016-101: RNCC: 3 | RNVC: 2

20 May 1999

5340-99-915-5414
Spring Tension Clip

999155414
80-06-32-2877: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-928-7990
Mounting Bracket

999287990
AS70495: RNCC: 3 | RNVC: 2
06602-003: RNCC: 6 | RNVC: 9

18 Dec 2006

5340-99-851-0663
Angle Bracket

998510663
NC9900-058-041: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-99-231-4287
Turnbuckle

992314287
D3759SFM03/GREEN: RNCC: 3 | RNVC: 2
D3759SFM03 SDD: RNCC: 5 | RNVC: 1
1372R-003: RNCC: 6 | RNVC: 9

21 Oct 2013

5340-99-544-5723
Groo Clamp Coupling

995445723
NO PRIMARY REF 99-544-5723: RNCC: 3 | RNVC: 2
BA10109-1: RNCC: 5 | RNVC: 2

19 May 1981

5340-99-948-6784
Butt Hinge

999486784
AS1879-720: RNCC: 2 | RNVC: 2
A.S.1879: RNCC: 5 | RNVC: 1
AS1879-72: RNCC: 6 | RNVC: 9
28N16453: RNCC: 6 | RNVC: 9
5340-99-948-6784: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-760-6175
Retaining Strap

997606175
P-911947-441: RNCC: 3 | RNVC: 2
P911947-441: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-557-5465
Rod End Clevis

995575465
E80381TEM5: RNCC: 3 | RNVC: 2
E8038-5: RNCC: 5 | RNVC: 2
H606-189418: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-264-0896
Mounting Plate

992640896
AK/04327/H/0/01: RNCC: 3 | RNVC: 2
CV174193: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-99-648-8386
Loop Clamp

996488386
NDN8462-322: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-391-2659
Dust And Moisture Seal Protective Cap

993912659
562486: RNCC: 3 | RNVC: 2
A2/562486: RNCC: 5 | RNVC: 2

5 Oct 2010

5340-99-103-4159
Spring Tension Clip

991034159
H13-83-209: RNCC: 3 | RNVC: 2
SRH13-83-209: RNCC: 5 | RNVC: 2
26SW2799: RNCC: 6 | RNVC: 9
26SW2799: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-225-6734
Butt Hinge Leaf

992256734
P-250261-007: RNCC: 3 | RNVC: 2
P250261-007: RNCC: 5 | RNVC: 2

18 Dec 1997

5340-99-946-5112
Butt Hinge Leaf

999465112
50-63867: RNCC: 3 | RNVC: 2
A50-63867: RNCC: 5 | RNVC: 2
A50-63867: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-639-8807
Resilient Mount

996398807
B45499: RNCC: 1 | RNVC: 2
31-406-03: RNCC: 3 | RNVC: 2
31-406-1MN60: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-654-3061
Spacing Threaded Standoff

996543061
P-890382-001: RNCC: 3 | RNVC: 2
P890382-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-198-6021
Synchro Clamp

991986021
ATR11: RNCC: 3 | RNVC: 2
003719: RNCC: 5 | RNVC: 2
AEA003719: RNCC: 5 | RNVC: 2
003719: RNCC: 5 | RNVC: 2
P-970135-401: RNCC: 5 | RNVC: 2
P970135-401: RNCC: 5 | RNVC: 2
26340-236: RNCC: 5 | RNVC: 2
6TJ745: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-633-7415
Mounting Plate

996337415
A3990-61522: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-423-1450
Guide

994231450
NO PRIMARY REF 99-423-1450: RNCC: 3 | RNVC: 2
3082943: RNCC: 5 | RNVC: 2
C582-LWM030534: RNCC: 6 | RNVC: 9

23 Jun 2001

5340-99-168-0623
Spacing Threaded Standoff

991680623
3887/65124-01: RNCC: 3 | RNVC: 2

10 Jan 2009

5340-99-553-8459
Mounting Plate

995538459
LDUK10003642: RNCC: 3 | RNVC: 2
LDUK10003642-003: RNCC: 5 | RNVC: 2

26 Mar 2013

5340-99-684-4481
Angle Bracket

996844481
EWAD305815: RNCC: 3 | RNVC: 2
1050F-001: RNCC: 6 | RNVC: 9

9 Sep 2010

5340-99-149-4088
Catch Strike

991494088
111236-606: RNCC: 3 | RNVC: 2
111236 606: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-216-0227
Block Fairlead

992160227
ER9101Z001-101: RNCC: 3 | RNVC: 2

24 Dec 2009

5340-99-152-4991
Angle Bracket

991524991
FV 2198513: RNCC: 3 | RNVC: 2
VR008: RNCC: 5 | RNVC: 2
MAE 22/0611: RNCC: 6 | RNVC: 9
SRN MAA700: RNCC: 6 | RNVC: 9
FH954EP0008: RNCC: 6 | RNVC: 9

22 Aug 1995

5340-99-738-6412
Resilient Mount

997386412
13-1548: RNCC: 3 | RNVC: 2
44672: RNCC: 5 | RNVC: 2
FL226/031: RNCC: 5 | RNVC: 2
BW44672: RNCC: 5 | RNVC: 2
13/1548-04: RNCC: 5 | RNVC: 2
FL226/31: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-940-0706
Loop Clamp

999400706
XC391-19: RNCC: 3 | RNVC: 2
P87212-16: RNCC: 5 | RNVC: 2
DEFSTAN53-15: RNCC: 6 | RNVC: 9
Z1ZA39983: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-815-5697
Webbing Strap

5340-99-836-5829

5340-99-362-7369
Butt Hinge

993627369
8U-3528: RNCC: 3 | RNVC: 2

9 Mar 2006

5340-99-830-1503
Plain Solid Disc

998301503
84/40138: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-370-9342
Pad

993709342
3513-724-03498: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-99-803-9828

5340-99-113-9152
Nut And Bolt Locking Plate

991139152
EEAS20/3EU: RNCC: 3 | RNVC: 2
26FZ-47206: RNCC: 6 | RNVC: 9
26DK5946: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-285-8693
Engine Accessory Bracket

992858693
664/1353: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-99-967-0892
Mounting Plate

999670892
UX67A: RNCC: 3 | RNVC: 2
LA2/16573: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-460-5576
Anti-Vibra Mounting

994605576
NO PRIMARY REF 99-460-5576: RNCC: 3 | RNVC: 2
G963GA1N13154: RNCC: 5 | RNVC: 2
27H2948: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-201-7266
Comp Helical Spring

992017266
NO PRIMARY REF 99-201-7266: RNCC: 3 | RNVC: 2
N172074: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-551-3631
Crank Handle

995513631
EU0905G040-041: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-99-615-5102
Electrical-Mec Post

996155102
KB132K0336-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-225-9664
Handwheel

992259664
NE40815: RNCC: 3 | RNVC: 2
NB41109 ITEM 15: RNCC: 5 | RNVC: 2
NB41109/15: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-99-350-8783
Rod End Clevis

993508783
EA6700Z525-103: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-99-940-5482
Retaining Plate

999405482
FV 3004621: RNCC: 3 | RNVC: 2
BR90/16-62-02-0506: RNCC: 5 | RNVC: 2

2 Sep 1994

5340-99-873-3104
General Purpose Resilient Mount

998733104
R04/22323/00: RNCC: 3 | RNVC: 2
81691100003: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-99-147-5602
Ball Joi Piston Rod

991475602
NO PRIMARY REF 99-147-5602: RNCC: 3 | RNVC: 2
KJ12D: RNCC: 5 | RNVC: 2
KJ12D: RNCC: 5 | RNVC: 2
021PN-111: RNCC: 6 | RNVC: 9
020GJ-002: RNCC: 6 | RNVC: 9
0212H-004: RNCC: 6 | RNVC: 9
99-940-0279: RNCC: 6 | RNVC: 9

8 Apr 2002

5340-99-791-1522
Pipe Hanger

997911522
4711040498: RNCC: 3 | RNVC: 2
47-1-1-040498: RNCC: 5 | RNVC: 2
47-11-040498: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-215-8485
Bearing Bracket

992158485
2935H 9": RNCC: 3 | RNVC: 2
SR0226/6: RNCC: 5 | RNVC: 2
0142-95/13: RNCC: 6 | RNVC: 9

11 Jun 1997

5340-99-207-0953
Half Clip

992070953
A26850: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-766-6281
Access Cover

997666281
CH0850792: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-755-8809
Loop Clamp

997558809
FWMB10815: RNCC: 3 | RNVC: 2
FWMB10815: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-666-3025
Loop Clamp

996663025
FV 2262412: RNCC: 3 | RNVC: 2
FV 2262412: RNCC: 5 | RNVC: 2

6 Nov 2004

5340-99-232-3463
Block Fairlead Section

992323463
50029012: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-99-667-9817
Manual Control Lever

996679817
FV3207334: RNCC: 3 | RNVC: 2

12 May 2011

5340-99-767-0239
Electrical-Mechanical Equipment Post

997670239
52PSR00A0045: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-235-5617
Loop Clamp

992355617
P468A0047-00: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-99-422-3425
Angle Bracket

994223425
FV2264608: RNCC: 3 | RNVC: 2

9 May 2007

5340-99-507-3134
Expansion Shield

995073134
00252961: RNCC: 3 | RNVC: 2
252961: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-99-828-5571
Loop Clamp

998285571
FV872173: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-99-815-7247
Vehicular Seat Bracket

998157247
FV 55417: RNCC: 3 | RNVC: 2
LV9ASCFV55417: RNCC: 6 | RNVC: 9
LV9ASCFV55417: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-810-1809
Mounting Plate

998101809
88MZ281: RNCC: 3 | RNVC: 2

17 Oct 1991

5340-99-819-7511
Dust And Moisture Seal Protective Plug

998197511
OE42017: RNCC: 3 | RNVC: 2
POE42017: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-99-809-9743
Filler Opening Cap

998099743
1571958: RNCC: 3 | RNVC: 2
18530: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-833-4255
Catch Assembly

998334255
9966219: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-820-3206
Double Angle Bracket

998203206
FV 2190401: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-99-812-8767
Mounting Plate

998128767
MBCS6372: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-99-816-6142
Mounting Bracket

998166142
00A0488B: RNCC: 3 | RNVC: 2
FV2279772: RNCC: 5 | RNVC: 2

1 Nov 2007

5340-99-823-0383
Retaining Strap

998230383
7195894: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-5056
Rubber Bumper

998295056
FV831279: RNCC: 3 | RNVC: 2
C100: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-823-2274
Flush Catch Claw

998232274
FV754138: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-832-9820
Access Cover

998329820
7078981: RNCC: 3 | RNVC: 2
LV7BD7078981: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-817-1925
Nut And Bolt Locking Plate

998171925
138608: RNCC: 3 | RNVC: 2
LV8RECS138608: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-820-8393
Rod End Clevis

998208393
FV730347: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-107-2819

5340-99-828-6635
Loop Clamp

998286635
FV 858796: RNCC: 3 | RNVC: 2
FV 858796: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-640-3473
Location Dog

996403473
GMB61592: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-100-3702

5340-99-734-4185
Catch Strike

5340-99-735-1245
Electrical-Mec Post

5340-99-736-6244
Butt Hinge

5340-99-735-8293
Dus Protective Plug

5340-99-139-0996

5340-99-192-2428
Bow Handle

5340-99-145-3007

5340-99-169-0466
Lamp Remover

5340-99-169-1004
Screw Thread Insert

5340-99-824-2934
Loop Clamp

998242934
FV731421: RNCC: 3 | RNVC: 2
FV731421: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-128-9504

5340-99-197-0062
Dust And Moisture Seal Protective Cap

991970062
EA2500V066-004: RNCC: 3 | RNVC: 2
FT 23713: RNCC: 5 | RNVC: 2

28 Feb 1995

5340-99-131-8125
Butt Hinge

991318125
FV3204174: RNCC: 3 | RNVC: 2
0342J-001: RNCC: 6 | RNVC: 9

5 Nov 2003

5340-99-230-9413
Angle Bracket

992309413
NB-90-9592-02: RNCC: 3 | RNVC: 2
PN-A-52-35-00-060-941A-A ITEM 11: RNCC: 5 | RNVC: 2
112YL-009: RNCC: 6 | RNVC: 9

13 Jul 2011

5340-99-831-0161
Bracket Headset

998310161
PT2568-3-751906: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-99-635-3646
Bail Handle

996353646
72-278: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-201-4830
Rod End Connector

992014830
NO PRIMARY REF 99-201-4830: RNCC: 3 | RNVC: 2
1GY13340U: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-052-4474
Manual Control Lever

990524474
509115: RNCC: 3 | RNVC: 2
509115-1: RNCC: 5 | RNVC: 2
A2 509115: RNCC: 5 | RNVC: 2
A2 509115-1: RNCC: 5 | RNVC: 2

14 Dec 1994

5340-99-351-4426
Mounting Bracket

993514426
NB-45-3075: RNCC: 3 | RNVC: 2
PC-A-27-50-00-02A-941A-A ITEM 56: RNCC: 5 | RNVC: 2
116Z9-007: RNCC: 6 | RNVC: 9

5 Oct 2011

5340-99-873-4432
Angle Bracket

998734432
AC/12/1/2227: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-99-383-2355
Mounting Plate

993832355
23266-193: RNCC: 3 | RNVC: 2

15 Jun 2010

5340-99-643-3181
Screw Thread Insert

996433181
GW4832100-2210: RNCC: 1 | RNVC: 2
1191-3CNX0-5701N: RNCC: 3 | RNVC: 1
B26676: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-731-9712

5340-99-648-0520
Dust And Moisture Seal Protective Plug

996480520
WTA190225: RNCC: 3 | RNVC: 2
640-2-12287: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-668-0092
Dirt And Liquid Deflector

996680092
NO PRIMARY REF 99-668-0092: RNCC: 3 | RNVC: 2
9.6437-14: RNCC: 5 | RNVC: 2
9.6437-14: RNCC: 5 | RNVC: 9

3 Jun 2011

5340-99-459-7456
Spring Holder

994597456
25CX761: RNCC: 3 | RNVC: 2
25CX761A: RNCC: 5 | RNVC: 2
25CX761: RNCC: 5 | RNVC: 2
26TD-1619: RNCC: 6 | RNVC: 9
26TD1619: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-797-4949
Clamp

997974949
689/1/07788/000: RNCC: 3 | RNVC: 2
D689/1/07788/000: RNCC: 5 | RNVC: 2
20422-151-00-9: RNCC: 5 | RNVC: 2
20422-151-9: RNCC: 5 | RNVC: 2

2 Jul 1988

5340-99-427-0993
Retaining Strap

994270993
BA40201: RNCC: 3 | RNVC: 2
BA40201: RNCC: 5 | RNVC: 9
36VV3836: RNCC: 6 | RNVC: 9
36VV3836: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-110-2201

5340-99-111-1953
Retaining Strap

5340-99-111-5802
Screw Thread Insert

5340-99-139-1603
Loop Clamp

5340-99-138-5342

5340-99-110-4649
Electrical-Mec Post

5340-99-383-4687
General Purpose Access Door

993834687
EA5334B144-802: RNCC: 3 | RNVC: 2

4 Aug 1997

5340-99-427-7896
Extension Drawer Slide

994277896
101005-1375-ASY: RNCC: 3 | RNVC: 2
RNTI01-ITEM 188: RNCC: 6 | RNVC: 9
TLAM1A2: RNCC: 6 | RNVC: 9

8 Aug 2003

5340-99-417-7765
Fuse Cover Plate

994177765
G1Z1028E00-01: RNCC: 3 | RNVC: 2

3 Oct 2004

5340-99-540-1866
Dirt And Liquid Deflector

995401866
C79082: RNCC: 3 | RNVC: 2
737-273294: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-611-7726
Angle Bracket

996117726
NO PRIMARY REF 99-611-7726: RNCC: 3 | RNVC: 2
ALR8531: RNCC: 5 | RNVC: 2

8 May 2004

5340-99-459-1215
Fork End

994591215
NO PRIMARY REF 99-459-1215: RNCC: 3 | RNVC: 2
PE2951: RNCC: 5 | RNVC: 2
40B1848: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-579-1633
Drill Guide

995791633
DR3276-0071-JD: RNCC: 3 | RNVC: 2
FS9917L0045: RNCC: 6 | RNVC: 9

25 Aug 1999

5340-99-613-0801
Retaining Strap

996130801
EM2-872035-401: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-867-6894

5340-99-202-1057

5340-99-970-0840

5340-99-300-4970
Metal Runner

5340-99-881-7294

5340-99-421-3999

5340-99-421-3550

5340-99-622-4316
Angle Bracket

5340-99-446-5579
Retaining Strap

5340-99-446-6117

5340-99-882-0705

5340-99-450-7290
Angle Bracket

994507290
P-870709-005: RNCC: 3 | RNVC: 2
P870709-005: RNCC: 5 | RNVC: 2

18 Apr 1990

5340-99-465-8516
Clip

994658516
TYPE C: RNCC: 3 | RNVC: 2
E10/8516: RNCC: 5 | RNVC: 2
29H4125: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-459-7607
Mounting Bracket

994597607
25-2SF21: RNCC: 3 | RNVC: 2
26TD-2751: RNCC: 6 | RNVC: 9
26TD2751: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-754-4543
Angle Bracket

997544543
P-212209-003: RNCC: 3 | RNVC: 2
P212209-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-738-4362
Handle Shoe

997384362
478T-SHE-002XA: RNCC: 3 | RNVC: 2
6126-0209: RNCC: 5 | RNVC: 2
7663-0209: RNCC: 5 | RNVC: 2
999/4/38110/004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-613-1211
Angle Bracket

996131211
121E15-110-03-2: RNCC: 3 | RNVC: 2
121E15-1100320: RNCC: 6 | RNVC: 9

15 May 1980

5340-99-299-0796
Mortise Lock

992990796
NO PRIMARY REF 99-299-0796: RNCC: 3 | RNVC: 2
469119-623-013: RNCC: 5 | RNVC: 2
469119-623-013: RNCC: 5 | RNVC: 9

19 Nov 2010

5340-99-171-8971
Df Housing Assembly

991718971
201-037141: RNCC: 3 | RNVC: 2

27 Jul 2005

5340-99-797-1325
Strap Hinge

997971325
TR3849-12: RNCC: 3 | RNVC: 2
TR3849-12: RNCC: 5 | RNVC: 9

14 Sep 1989

5340-99-826-9329
Multiple Angle Bracket

998269329
FV 893455: RNCC: 3 | RNVC: 2
6041-308: RNCC: 5 | RNVC: 2
X6041-308: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-112-2631
General Purpose Resilient Mount

991122631
L64BA10: RNCC: 3 | RNVC: 2
999-9-02656-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-177-3540
Mounting Bracket

991773540
NO PRIMARY REF 99-177-3540: RNCC: 3 | RNVC: 2
9.7220-239: RNCC: 5 | RNVC: 2
9.7220-239: RNCC: 5 | RNVC: 9

3 Jun 2011

5340-99-535-8381
Angle Bracket

995358381
WG1312-0863-102: RNCC: 3 | RNVC: 2
XP98PC01063: RNCC: 6 | RNVC: 9

12 Mar 1998

5340-99-737-7824
Electrical-Mec Post

997377824
3990/88307: RNCC: 3 | RNVC: 2
A3990/88307: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-351-3963
Dust And Moisture Seal Protective Cap

993513963
RILDE9P-DUST: RNCC: 3 | RNVC: 2
DE9P-DUST: RNCC: 5 | RNVC: 2
002B4-019: RNCC: 6 | RNVC: 9

7 Feb 2001

5340-99-710-1619
Rubber Bushing

997101619
0730155: RNCC: 3 | RNVC: 2
H700-985880: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-544-6620
Rod End Clevis

995446620
K145-10A919: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-462-3531
Plunger Assembly

994623531
MBEU-90803: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-99-179-7419
Door Stop Pad

991797419
110029-19066: RNCC: 3 | RNVC: 2
110029/19066: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-763-8872
Clamping Catch

997638872
360303: RNCC: 3 | RNVC: 2
0089603639: RNCC: 5 | RNVC: 2
0035966421: RNCC: 5 | RNVC: 2
89603639: RNCC: 5 | RNVC: 2
359664-00: RNCC: 6 | RNVC: 9
35966400: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-958-4122
Turnbuckle Body

999584122
ML1-83-0833: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-99-187-1943
Rod End Clevis

991871943
PE33549: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-99-786-0109
Bumper

997860109
3A077-0503: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-888-7097
Strap Assembly

998887097
NO PRIMARY REF 99-888-7097: RNCC: 3 | RNVC: 2
FD75034: RNCC: 5 | RNVC: 2
C57670T279904: RNCC: 6 | RNVC: 9

25 Jun 2002

5340-99-651-9411
Block Fairlead

996519411
P-731769-401: RNCC: 3 | RNVC: 2
P731769-401: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-902-3255
Plate

999023255
69302325: RNCC: 3 | RNVC: 2
FF962LN0032: RNCC: 6 | RNVC: 9

9 Jul 1996

5340-99-649-2412
Rim Clenching Clamp

996492412
271166: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-695-2771
Double Angle Bracket

996952771
WPG 9740: RNCC: 3 | RNVC: 2
FJ991HM0038: RNCC: 6 | RNVC: 9

16 Sep 1999

5340-99-532-8724
Access Cover

995328724
RUA9627: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-184-9086
Mounting Bracket

991849086
POG100651: RNCC: 3 | RNVC: 2

25 Nov 2009

5340-99-129-7925
Sash Pole

5340-99-135-7605

5340-99-867-3769
Retaining Band

5340-99-732-0734
Electrical-Mec Post

5340-99-713-1171
Loop Clamp

997131171
AS3181-8B: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-479-5642
Block Clamp

994795642
110087-1731: RNCC: 3 | RNVC: 2
26VC-20511: RNCC: 6 | RNVC: 9

1 Feb 2002

5340-99-563-6027
Rim Latch

995636027
4421: RNCC: 3 | RNVC: 2
83-8501: RNCC: 5 | RNVC: 2
TT7776380: RNCC: 6 | RNVC: 9
7776380: RNCC: 6 | RNVC: 9
001ZV-070: RNCC: 6 | RNVC: 9
99-371-9017: RNCC: 6 | RNVC: 9

30 Jun 1997

5340-99-665-9798
Angle Bracket

996659798
J92106553-001: RNCC: 3 | RNVC: 2

26 Jun 2003

5340-99-581-0856
Synchro Clamp

995810856
4502-PGR-M125: RNCC: 3 | RNVC: 2

29 Jan 2008

5340-99-560-3089
Handwheel

995603089
MV00601AZ010-13: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-216-1817
Bail Handle

992161817
NO PRIMARY REF 99-216-1817: RNCC: 3 | RNVC: 2
P63-490-118: RNCC: 5 | RNVC: 2
826-155: RNCC: 5 | RNVC: 2

26 Nov 2012

5340-99-494-2204
Access Cover

994942204
427-640-001: RNCC: 3 | RNVC: 2

17 Jul 2012

5340-99-304-7151
Mounting Plate

993047151
FV2292336: RNCC: 3 | RNVC: 2
084X0-023: RNCC: 6 | RNVC: 9

5 Nov 2008

5340-99-818-4943
Helical Co Retainer

998184943
NO PRIMARY REF 99-818-4943: RNCC: 3 | RNVC: 2
FV659427: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-902-5410
Mounting Bracket

999025410
70-76-1016: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-99-215-5611
Cam Buckle Lashing

992155611
0005-4814-40-3: RNCC: 3 | RNVC: 2
FF952J20063: RNCC: 6 | RNVC: 9

13 Sep 1995

5340-99-087-1354
Welded Holder

990871354
465-068 371.000: RNCC: 3 | RNVC: 2
9 890 425: RNCC: 5 | RNVC: 2

27 Jan 1995

5340-99-784-4063
Swivel Castor

997844063
697813: RNCC: 3 | RNVC: 2

17 Sep 1985

5340-99-792-0337
Mounting Plate

997920337
FV2051426: RNCC: 3 | RNVC: 2
FV2051426: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-795-2246
Double Angle Bracket

997952246
JJ110473: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-790-2257
Section Block Clamp

997902257
SL4857BRB8B: RNCC: 3 | RNVC: 2
SL4857: RNCC: 5 | RNVC: 1
7B8BRB SL4857: RNCC: 5 | RNVC: 2
SL4857B8BRB: RNCC: 5 | RNVC: 2
7BRB8B SL4857: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-789-6406
Helical Compression Spring Seat

997896406
NE34493: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-99-795-1481
Turnbuckle

997951481
5082A: RNCC: 3 | RNVC: 2
5082A: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-789-9476
Webbing Strap

997899476
8251949650: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-99-789-2501
Rod End Clevis

997892501
CL7642: RNCC: 3 | RNVC: 2
B8545: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-783-7885
Resilient Mount

997837885
AVM200TYPE9: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-794-5867
Helical Compression Spring Seat

997945867
BM33155: RNCC: 3 | RNVC: 1
EM33153 ITEM17: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-790-4638
Inner Lock

997904638
1367424: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-173-0698
Access Door Hinge

991730698
110652-7826A: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-784-3363
Neckband Cable Clam

997843363
A21486: RNCC: 3 | RNVC: 2
21486: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-905-5083
Clamp

999055083
666000254: RNCC: 3 | RNVC: 2

28 May 1997

5340-99-428-5524
Cover

994285524
504158975: RNCC: 3 | RNVC: 2
CV170686: RNCC: 5 | RNVC: 2

9 May 2011

5340-99-422-0277

5340-99-750-6776

5340-99-545-2623
Handle

5340-99-561-5364
Mortise Lock

5340-99-830-0859
Expansion Plug

5340-99-786-1381
Control Cable

5340-99-900-3115

5340-99-810-5990
Line Supporti Strap

5340-99-783-8189
Electrical-Mec Post

5340-99-995-0710
Mounting Plate

999950710
06-11-05: RNCC: 3 | RNVC: 2
13226E0151: RNCC: 5 | RNVC: 2

25 Jan 2007

5340-99-352-5224
Manual Control Handle

993525224
S3S18139070: RNCC: 3 | RNVC: 2

14 Aug 1996

5340-99-772-0688
Retaining Strap

997720688
100099-1117-008: RNCC: 3 | RNVC: 2
692/2/01869/000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-774-5964
Webbing Strap

997745964
MBEU-70476-1: RNCC: 3 | RNVC: 2
MBEU70476-1: RNCC: 5 | RNVC: 2
C/MBEU-70476-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-647-4860
Ball Catch Assembly

996474860
NO PRIMARY REF 99-647-4860: RNCC: 3 | RNVC: 2
F3781-1-41ND1A: RNCC: 5 | RNVC: 2
26VC17350: RNCC: 6 | RNVC: 9
26VC17350: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-319-8470
Mounting Bracket

993198470
P-892127-010: RNCC: 3 | RNVC: 2
P892127-010: RNCC: 5 | RNVC: 2

10 Jun 1994

5340-99-197-7973
Mounting Bracket

991977973
FV2135621: RNCC: 3 | RNVC: 2
FV2135621: RNCC: 5 | RNVC: 2
CES P/46177/1: RNCC: 6 | RNVC: 9

6 Nov 1989

5340-99-250-1155
Bearing Housing

992501155
NO PRIMARY REF 99-250-1155: RNCC: 3 | RNVC: 2
FOR TYPE MC7-4/P2/1HP S/NO944542: RNCC: 5 | RNVC: 2
B172-TT5552302: RNCC: 6 | RNVC: 9

9 Jan 2002

5340-99-151-3268
Assembl Door Handle

991513268
GM-B-122034: RNCC: 3 | RNVC: 2
OE-B-8855: RNCC: 5 | RNVC: 2
XP98PD01022: RNCC: 6 | RNVC: 9

2 Apr 1998

5340-99-930-7292
Webbing Strap

999307292
625/7/04829/000: RNCC: 3 | RNVC: 2
625/1/04829/000: RNCC: 5 | RNVC: 2
999/1/47853/001: RNCC: 5 | RNVC: 2
RLL50E: RNCC: 5 | RNVC: 2
625/LB/04829/000: RNCC: 5 | RNVC: 2
RLL50E-4.5M,MODIFIED: RNCC: 5 | RNVC: 2
WE123A3: RNCC: 6 | RNVC: 9
P2093/1616: RNCC: 6 | RNVC: 9
UW214C: RNCC: 6 | RNVC: 9

19 Jan 1996

5340-99-651-5489
Rod End Clevis

996515489
P-880092-009: RNCC: 3 | RNVC: 2
P880092-009: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-741-4755
Mounting Bracket

997414755
A3/509/675.3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-874-6312
Access Cover

998746312
700427-604-001: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-99-767-5027
Cushioning Pad

997675027
612/2/46224: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-501-0702
Retaining Strap

995010702
27441-205: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-99-147-5238
Brass Pockets

991475238
NO PRIMARY REF 99-147-5238: RNCC: 3 | RNVC: 2
BSP 0730579: RNCC: 5 | RNVC: 2
B126-TT7776950: RNCC: 6 | RNVC: 9

10 Jan 2002

5340-99-435-1613
Mounting Bracket

994351613
H12-45-2440: RNCC: 3 | RNVC: 2
26SW3211: RNCC: 6 | RNVC: 9
26SW3211: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-801-9063
Mounting Bracket

998019063
A4/28388: RNCC: 3 | RNVC: 2
A4/28388: RNCC: 5 | RNVC: 2
28388: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-236-5742
Air Tank

992365742
NO PRIMARY REF 99-236-5742: RNCC: 3 | RNVC: 2
9841-2829: RNCC: 5 | RNVC: 2
C583-LWM048264: RNCC: 6 | RNVC: 9

10 Jul 2001

5340-99-840-1153
Access Cover

998401153
0065704-002: RNCC: 3 | RNVC: 2

2 Mar 2002

5340-99-655-2650
Mounting Plate

996552650
P-913877-010: RNCC: 3 | RNVC: 2
P913877-010: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-968-5360
Mounting Plate

999685360
MOD/A/453/304: RNCC: 3 | RNVC: 2

18 Mar 2008

5340-99-767-0278
Clamp Assembly

997670278
52RCL00A0002: RNCC: 3 | RNVC: 2
52RCL00A0002-3.1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-940-6280
Barrel Assembly

999406280
SR1428/8: RNCC: 3 | RNVC: 2
560-97/28: RNCC: 6 | RNVC: 9
59/11933/92: RNCC: 6 | RNVC: 9

16 Oct 1997

5340-99-933-1504
Clip Retainer Plate

999331504
NO PRIMARY REF 99-933-1504: RNCC: 3 | RNVC: 2
NY18194: RNCC: 5 | RNVC: 2
B26384: RNCC: 5 | RNVC: 2

3 Oct 1978

5340-99-154-9935
Mounting Bracket

991549935
CEDC-222-1: RNCC: 3 | RNVC: 2
CEDC-221-1: RNCC: 3 | RNVC: 9
CEDC-222-1: RNCC: 5 | RNVC: 2
CEDC-221-1: RNCC: 5 | RNVC: 9

29 Sep 2010

5340-99-525-6527
Friction Catch

995256527
2600: RNCC: 3 | RNVC: 1
85-119-52-2-2744: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-615-3490
Retaining Strap

996153490
KB290K0241-000: RNCC: 3 | RNVC: 2
KB290K0241-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-392-5384
Cushioning Pad

993925384
1300-10720: RNCC: 3 | RNVC: 2

28 May 2010

5340-99-148-0232
Roller

991480232
GS97/05/06/AJ: RNCC: 3 | RNVC: 2
MOD/A/488/035 ITEM 7: RNCC: 5 | RNVC: 2
MOD/A/488/035/7: RNCC: 5 | RNVC: 2
074NF-004: RNCC: 6 | RNVC: 9

27 Sep 2007

5340-99-112-3665
Manual Control Handle

991123665
110039-2961: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-99-160-4546
Assy Roof Gantry

991604546
K505685: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-152-1620
Loop Clamp

991521620
14500291: RNCC: 3 | RNVC: 2
CV186239: RNCC: 5 | RNVC: 2
VOE14500291: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-99-051-8625
Latch Pad

990518625
AS48186: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-99-626-4443
Retaining Strap

996264443
BKB816: RNCC: 3 | RNVC: 2
BKB8161002: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-138-4182
Unit Stud

991384182
STA0416BSF: RNCC: 3 | RNVC: 2
STA0416: RNCC: 5 | RNVC: 1
62S20038: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-591-4104
Hinge

995914104
IN0060: RNCC: 3 | RNVC: 2

14 Jul 2001

5340-99-796-2331
Runner

5340-99-794-3478
Bail Handle

5340-99-823-2425
Retaining Strap

5340-99-768-5713
Turnbuckle

997685713
NO PRIMARY REF 99-768-5713: RNCC: 3 | RNVC: 2
451/352: RNCC: 5 | RNVC: 1
451/352: RNCC: 5 | RNVC: 1
451/352 AND 451/353 AND 451/354: RNCC: 5 | RNVC: 2
451/352 AND 451/353 AND 451/354: RNCC: 5 | RNVC: 2

15 Sep 1983

5340-99-388-6699
Mounting Bracket

993886699
HD-70390: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-99-712-0430
Hinge Bracket

997120430
NO PRIMARY REF 99-712-0430: RNCC: 3 | RNVC: 2
E2981: RNCC: 5 | RNVC: 1
61AE2981: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-300-8014
Electrical-Mec Post

993008014
NO PRIMARY REF 99-300-8014: RNCC: 3 | RNVC: 2
PC14566: RNCC: 5 | RNVC: 2
TT7772189: RNCC: 6 | RNVC: 9
TT7772190: RNCC: 6 | RNVC: 9
B140-TT-7772190: RNCC: 6 | RNVC: 9

8 Sep 1993

5340-99-259-6598
Anti-Rotationa Clip

992596598
ARC050: RNCC: 3 | RNVC: 2
4480-12: RNCC: 6 | RNVC: 9

14 Oct 2013

5340-99-256-5571
Mounting Bracket

992565571
EU3110A063-041: RNCC: 3 | RNVC: 2

8 Aug 2008

5340-99-659-6549
Dust And Moisture Seal Protective Cover

996596549
1290-1037: RNCC: 3 | RNVC: 2
1290-1037: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-663-8258
Bow Handle

996638258
EU5210B169-043: RNCC: 3 | RNVC: 2

21 Oct 1997

5340-99-604-5066
Loop Clamp

996045066
STD2045-38-20: RNCC: 3 | RNVC: 2
STD2045-38-20: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-534-2251
Spring Tension Clip

995342251
23-0106: RNCC: 3 | RNVC: 2
114802: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-544-6162
Nut And Bo Retainer

995446162
NO PRIMARY REF 99-544-6162: RNCC: 3 | RNVC: 2
K145-15A701: RNCC: 5 | RNVC: 2

20 Jun 1977

5340-99-651-9984
Electrical-Mec Post

996519984
3854-36485: RNCC: 3 | RNVC: 2
B3854-36485: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-790-7180
Angle Bracket

997907180
WG1381-8574-056: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-99-131-2624
Mounting Bracket

991312624
110153-4641: RNCC: 3 | RNVC: 2
26VC16916: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-553-8097
Double Angle Bracket

995538097
AA-3170-016: RNCC: 3 | RNVC: 2
AA-3170-016: RNCC: 5 | RNVC: 2

17 Jan 2013

5340-99-206-7350
Retaining Strap

992067350
34-0218-04: RNCC: 3 | RNVC: 2
FV 2027147: RNCC: 5 | RNVC: 2
FWMB10818: RNCC: 5 | RNVC: 2
FV 2027147: RNCC: 5 | RNVC: 2
FWMB10818: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-810-1001
Angle Bracket

998101001
60257-082: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-399-7963
Access Cover

993997963
V35-1078-50: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-99-667-5266
Mounting Plate

996675266
NO PRIMARY REF 99-667-5266: RNCC: 3 | RNVC: 2
3564212: RNCC: 5 | RNVC: 2

15 Dec 2009

5340-99-169-7803
Mounting Bracket

991697803
NO PRIMARY REF 99-169-7803: RNCC: 3 | RNVC: 2
R066136: RNCC: 5 | RNVC: 2

13 May 2010

5340-99-114-7736
Coat And Hat Hook

991147736
1TA231092: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-403-7149
Spring Tension Clip

994037149
AO1899: RNCC: 3 | RNVC: 2

23 May 2013

5340-99-766-7597
Espagnolette Bolt

5340-99-411-0749
Manual Control Lever

994110749
0101/08: RNCC: 3 | RNVC: 2

9 Dec 1991

5340-99-250-8922
Loop Clamp

992508922
1750-409: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-980-1699
Mounting Plate

999801699
MBEU83129: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-99-974-2554
Butt Hinge

999742554
FV2252939: RNCC: 3 | RNVC: 2
FV2252939: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-99-988-4145
Block Assembly

999884145
72201318: RNCC: 3 | RNVC: 2
FF962CZ0030: RNCC: 6 | RNVC: 9

14 May 1996

5340-99-682-6852
Bracket Assy

996826852
M5755196300000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-517-4217
Access Cover

5340-99-739-0607
Mounting Bracket

997390607
BHU710010: RNCC: 3 | RNVC: 2
032ZO-001: RNCC: 6 | RNVC: 9

7 Aug 2003

5340-99-410-7997
Dust And Moisture Seal Protective Plug

994107997
331/31738: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-99-837-0391
Manual Control Handle

998370391
25/206801: RNCC: 3 | RNVC: 2

15 Dec 2010

5340-99-716-0636
Retaining Strap

997160636
WD4173-00003-103: RNCC: 3 | RNVC: 2
WD4173-000031TEM3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-781-6371
Webbing Assem Strap

997816371
SE10284-041-010: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-746-1002
Mounting Plate

997461002
330E67-1211-03: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-745-2043
Cone Locking Body

997452043
0153-0203: RNCC: 3 | RNVC: 2
153-116: RNCC: 5 | RNVC: 2

7 Feb 1985

5340-99-460-1270
Bar

994601270
NO PRIMARY REF 99-460-1270: RNCC: 3 | RNVC: 2
FD65676: RNCC: 5 | RNVC: 2
C58170T259233: RNCC: 6 | RNVC: 9

1 Jul 2002

5340-99-103-2090
Rod End Clevis

991032090
SR/H9/10/439: RNCC: 3 | RNVC: 2
26SW904: RNCC: 6 | RNVC: 9
26SW904: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-227-8855
Pinion Hub

992278855
10444-02074/1: RNCC: 3 | RNVC: 2
10444-02074: RNCC: 5 | RNVC: 2
G0051581: RNCC: 5 | RNVC: 2

25 Feb 2008

5340-99-849-9242
Dust And Moisture Seal Protective Cap

998499242
MX/01101/CN/035: RNCC: 3 | RNVC: 2
004469664: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-665-8116
Mounting Bracket

996658116
330E67-1150-20: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-254-9201
Horizontal Clamp

992549201
H350/1B: RNCC: 3 | RNVC: 2

3 Feb 1989

5340-99-817-9369
Headle Straight Rod

5340-99-717-3030

5340-99-765-5386
Angle Bracket

5340-99-802-6624

5340-99-142-8082
Rubber Bushing

991428082
ST101376: RNCC: 3 | RNVC: 2
A911632-1: RNCC: 5 | RNVC: 2
B46275: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-775-3032

5340-99-724-0814

5340-99-729-0215

5340-99-297-9361
Mounting Bracket

992979361
333/F8105: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-99-662-8504

5340-99-577-3199
Cabinet Handle

995773199
5027: RNCC: 3 | RNVC: 1
HA2578: RNCC: 5 | RNVC: 2
5027R: RNCC: 5 | RNVC: 2
W-1582: RNCC: 6 | RNVC: 9

29 Jan 1993

5340-99-198-9214
Electrical-Mec Post

991989214
509-2-01387: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-580-4049
Nonmetallic Special

5340-99-636-2173

5340-99-311-5060
Rope Adjustment Kit

993115060
625/1/06684/000: RNCC: 3 | RNVC: 2
625/GA/06684/000: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-99-629-6379
Block Fairlead Section

996296379
MDS3008/110: RNCC: 3 | RNVC: 2
WG1381-0332-101: RNCC: 5 | RNVC: 9
XP98PC01047: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-886-5402
Dust And Moisture Seal Boot

998865402
NO PRIMARY REF 99-886-5402: RNCC: 3 | RNVC: 2
3JD-25917-00: RNCC: 5 | RNVC: 2

16 Apr 2013

5340-99-836-4538
Loop Clamp

998364538
NO PRIMARY REF 99-836-4538: RNCC: 3 | RNVC: 2
1519-247: RNCC: 5 | RNVC: 2
CV129129: RNCC: 5 | RNVC: 2
1519-247/2: RNCC: 6 | RNVC: 9

26 Mar 2009

5340-99-421-9189
Centre Plate

994219189
ASD-2151: RNCC: 3 | RNVC: 2
ASD-2151DT001: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-99-024-7066
Shredder

990247066
SR0382/6: RNCC: 3 | RNVC: 2
491402: RNCC: 6 | RNVC: 9
0025-91/1: RNCC: 6 | RNVC: 9

30 Jun 1997

5340-99-432-3898
General Purpose Resilient Mount

994323898
ED132-001-2-75: RNCC: 3 | RNVC: 2
PL-1V109443 REF 6: RNCC: 5 | RNVC: 2
PL-1V109443/6: RNCC: 5 | RNVC: 2

23 May 2001

5340-99-659-8487
Angle Bracket

996598487
P-211646-043: RNCC: 3 | RNVC: 2
P211646-043: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-455-5574
Loop Clamp

994555574
EAP4302: RNCC: 3 | RNVC: 2
6TC1240: RNCC: 6 | RNVC: 9

5 Feb 1990

5340-99-601-4293
Rod End Connector

996014293
6U2129A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-120-1161
Spring Tension Clip

991201161
MT27186: RNCC: 3 | RNVC: 1
MT27186: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-463-5790
Mounting Plate

994635790
FV 2080811: RNCC: 3 | RNVC: 2
FV 2080811: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-99-950-2648
Rod End Clevis

999502648
FV 2208132: RNCC: 3 | RNVC: 2

14 Feb 1994

5340-99-950-3648
Dust And Moisture Seal Protective Cover

999503648
ET533073: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-453-6313
Strengthening Plate

994536313
FV 2202475: RNCC: 3 | RNVC: 2
FV 2202475: RNCC: 5 | RNVC: 2
FH9644N0005: RNCC: 6 | RNVC: 9

3 May 1996

5340-99-112-2222

5340-99-112-2742

5340-99-110-8989

5340-99-545-5743
Nut And Bolt Locking Plate

995455743
510/97: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-112-2924

5340-99-721-4854
Mounting Bracket

997214854
P-918081-413: RNCC: 3 | RNVC: 2
P918081-413: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-983-0844
Mounting Bracket

999830844
EA2-83-5540: RNCC: 3 | RNVC: 2
26FZ-33126: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-547-8834
Webbing Strap

995478834
AB/1/1/1235: RNCC: 3 | RNVC: 2
MM11590: RNCC: 5 | RNVC: 2

19 Jul 1994

5340-99-215-1738
Rim Lock

992151738
2304: RNCC: 3 | RNVC: 2
305B-LOK-001SF: RNCC: 5 | RNVC: 9
AC1376: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-601-9589
Webbing Strap

996019589
353-510-011: RNCC: 3 | RNVC: 2
353-510-011: RNCC: 5 | RNVC: 2

5 Oct 2011

5340-99-567-0663
Mounting Bracket

995670663
WG1382-9139-041: RNCC: 3 | RNVC: 2

9 Feb 1994

Load More Results