What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 44 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 44 of 368

5340-99-605-4320
Protection Bellows

5340-99-604-3019

5340-99-601-0054
Webbing Strap

5340-99-601-1358
Tubul Fairlead Half

5340-99-667-7371
Dust And Moisture Seal Protective Cover

996677371
AMP 00 04 33235: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-99-601-0677
Mounting Plate

5340-99-894-8748
Bracket Support Ass

5340-99-745-5216
Display Cover

5340-99-912-8964
Dust And Moisture Seal Protective Cap

999128964
AGS596-A: RNCC: 2 | RNVC: 2
AGS596A: RNCC: 3 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
C0M5987: RNCC: 5 | RNVC: 2
AGS596A: RNCC: 5 | RNVC: 2
19: RNCC: 5 | RNVC: 2
AGS596-A: RNCC: 5 | RNVC: 2
28N11403: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-208-0859
Loop Clamp

992080859
EC.2375: RNCC: 3 | RNVC: 2
B199-TT4443374: RNCC: 6 | RNVC: 9
A10249/2375: RNCC: 7 | RNVC: 2

25 Apr 1991

5340-99-431-7166
Clip

994317166
NO PRIMARY REF 99-431-7166: RNCC: 3 | RNVC: 2
DN07670-339CRS9: RNCC: 5 | RNVC: 2
88305-305-337: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-120-0640
Retaining Strap

991200640
R6: RNCC: 3 | RNVC: 2
A16-47322: RNCC: 5 | RNVC: 2
PH23801-21: RNCC: 5 | RNVC: 2
A16-47322: RNCC: 5 | RNVC: 2
1EA18381F: RNCC: 5 | RNVC: 2
C121-Z9-C11: RNCC: 5 | RNVC: 2
5K5952: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-153-8615
Bracket

991538615
M2825052820000: RNCC: 3 | RNVC: 2

11 Oct 2013

5340-99-410-8242
Strapping Seal

994108242
EMBOSSED SEAL621: RNCC: 3 | RNVC: 9

7 May 2013

5340-99-127-2800
Mounting Bracket

991272800
P30A6129: RNCC: 3 | RNVC: 2
010QJ: RNCC: 6 | RNVC: 9

17 Apr 2001

5340-99-413-9311
Mounting Bracket

994139311
GD00442969: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-99-409-3585
Retaining Strap

994093585
GMA13758: RNCC: 3 | RNVC: 2
61SL40281: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-613-7022
General Purpose Resilient Mount

996137022
333/P6652: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-99-700-3924
Identificati Sleeve

997003924
MAMCXSS1L1C0NE3MM: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-514-9292
Retaining Strap

995149292
G015502: RNCC: 3 | RNVC: 2
FL990II0120: RNCC: 6 | RNVC: 9

24 Mar 1999

5340-99-531-4550
Spring Tension Clip

995314550
B665871: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-613-8090
Loop Clamp

996138090
6044-51-2100: RNCC: 3 | RNVC: 2
1288Y-002: RNCC: 6 | RNVC: 9

18 Oct 2012

5340-99-470-7687
Swivel Castor

994707687
461RH: RNCC: 3 | RNVC: 2
1MT10044: RNCC: 5 | RNVC: 2
4G9227: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-8591

5340-99-979-8740
Loop Clamp

999798740
UG0545911/8: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-99-406-2056
Retaining Strap

994062056
AS488-9: RNCC: 2 | RNVC: 2
28E15784: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-517-8459
Protection Bellows

995178459
52003-001/3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-749-8149
Dust And Moisture Seal Protective Plug

997498149
01T-C-10374: RNCC: 3 | RNVC: 2
01TC10374: RNCC: 5 | RNVC: 2
01T-C-10374: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-256-2811
Grooved Clamp Coupling

992562811
1300-5S-58: RNCC: 3 | RNVC: 2
E61274-6: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-499-8139
Block Fairlead Section

994998139
6-4CF-7141: RNCC: 3 | RNVC: 2
26DL-17125: RNCC: 6 | RNVC: 9

8 Jul 2002

5340-99-372-9062
Plug

993729062
SR1767/6: RNCC: 3 | RNVC: 2
Q393: RNCC: 6 | RNVC: 9
747-97/19: RNCC: 6 | RNVC: 9

17 Feb 1998

5340-99-280-2291
Angle Bracket

992802291
0700D05001-045: RNCC: 3 | RNVC: 2
0700D05001 ITEM 4: RNCC: 5 | RNVC: 2
0700D05001/4: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-99-946-1798
Rim Clenching Clamp

999461798
NO PRIMARY REF 99-946-1798: RNCC: 3 | RNVC: 2
16-22204: RNCC: 5 | RNVC: 2
16-22204: RNCC: 5 | RNVC: 2

7 Nov 1979

5340-99-728-4769
Electrical-Mec Post

997284769
TPI/9.5/40/M4/I/I: RNCC: 3 | RNVC: 2
42276-137-00-9: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-000-6051
Spacing Threaded Standoff

990006051
707209-0004: RNCC: 3 | RNVC: 2
BD 707209/VAR.: RNCC: 5 | RNVC: 1
BD 707209/4: RNCC: 5 | RNVC: 2
BD707209-0004: RNCC: 5 | RNVC: 2
BD707209-4: RNCC: 5 | RNVC: 2
707209/4: RNCC: 5 | RNVC: 2
D707209-0004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-762-2356
Angle Bracket

997622356
42/24298: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-004-1419
Catch

990041419
SSN09/M/601/20/3/3: RNCC: 3 | RNVC: 2
M/601/20/3 PART 3: RNCC: 5 | RNVC: 1
M/601/20/3/3: RNCC: 5 | RNVC: 1
SSN.09/M/601/20/3 PART 3: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-99-232-3025
Circlip

992323025
NO PRIMARY REF 99-232-3025: RNCC: 3 | RNVC: 2
1300-0-50: RNCC: 5 | RNVC: 2
26VC/14862: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-416-8503
Rod End Clevis

994168503
EB8-83-1519: RNCC: 3 | RNVC: 2
26FZ-30379: RNCC: 6 | RNVC: 9
26FZ30379: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-244-7878
Spring Tension Clip

992447878
NO PRIMARY REF 99-244-7878: RNCC: 3 | RNVC: 2
NTC1176: RNCC: 5 | RNVC: 2
(241)AE095NTC1176: RNCC: 8 | RNVC: 2
NTC1176: RNCC: 8 | RNVC: 2

24 May 1996

5340-99-126-0279
Mounting Bracket

991260279
V-35-0609-01: RNCC: 3 | RNVC: 2
V-35-0609: RNCC: 5 | RNVC: 2

23 Nov 1994

5340-99-388-6808
Mounting Bracket

993886808
WG1583-0311-041: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-99-820-5917
Mounting Bracket

998205917
OE-C-11629-A: RNCC: 3 | RNVC: 2

4 Sep 2012

5340-99-799-6065
Constant Ef Support

997996065
C50/O/3: RNCC: 3 | RNVC: 1
C50/O: RNCC: 5 | RNVC: 1
C50: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-749-9029
Bracket Assembly

997499029
WG0081-0355-041: RNCC: 3 | RNVC: 2
WG0081-0355/ITEM 1: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-99-500-1676
Welded As Container

995001676
0026-3517-04-0: RNCC: 3 | RNVC: 2
0026-3517-04-1: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-99-700-1509
Clamp

997001509
AS6702-12: RNCC: 2 | RNVC: 2

26 Sep 1979

5340-99-627-6994
Angle Bracket

996276994
NO PRIMARY REF 99-627-6994: RNCC: 3 | RNVC: 2
ASR2451: RNCC: 5 | RNVC: 2
FJ9914L0341: RNCC: 6 | RNVC: 9

10 Jul 1999

5340-99-720-2784
Dust And Moisture Seal Protective Cap

997202784
HTE 7170-20-D: RNCC: 3 | RNVC: 2
ZDG-9001-62: RNCC: 5 | RNVC: 2
MHM-012: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-104-1264
Loop Clamp

991041264
1C0696: RNCC: 3 | RNVC: 2
1C0-696: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-130-0087
Butt Hinge

991300087
BS1227: RNCC: 4 | RNVC: 1
WB1105: RNCC: 5 | RNVC: 1
90-20-016: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-103-6053
Grooved Clamp Coupling Ferrule

991036053
C11604-16B: RNCC: 3 | RNVC: 2
556-4-06126: RNCC: 5 | RNVC: 1
26DK10568: RNCC: 6 | RNVC: 9
26NA6290: RNCC: 6 | RNVC: 9
26NA6290: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-748-5914
Dust And Moisture Seal Protective Cap

997485914
HGT 1190/1/405: RNCC: 3 | RNVC: 2
HGT1190-1-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-718-8992
Mounting Bracket

997188992
ER9440F018-101: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-863-7248
Rod End Clevis

998637248
SST/Y/270/20/S003/107 SHEET 001-: RNCC: 3 | RNVC: 1
001294367: RNCC: 5 | RNVC: 1
001294367 PART 107: RNCC: 5 | RNVC: 1
001294367/107: RNCC: 5 | RNVC: 1
SST/Y/270/20/S003/000: RNCC: 5 | RNVC: 1
SST/Y/270/20/S003/000 PART 107: RNCC: 5 | RNVC: 1
SST/Y/270/20/S003/000/107: RNCC: 5 | RNVC: 1
SST/Y/270/20/S003/107: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-743-2272
Mounting Bracket

997432272
J92106088-003: RNCC: 3 | RNVC: 2

30 Sep 2004

5340-99-580-7686
Mounting Bracket

995807686
S6-4B/TP.890A: RNCC: 3 | RNVC: 2
26DL/17650: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-733-3473
Angle Bracket

997333473
2605-3205-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-126-0551
Panel

991260551
EA1205G031-101: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-99-655-2869
Angle Bracket

996552869
WG1312-0045-111: RNCC: 3 | RNVC: 2
26LX2591: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-615-3482
Retaining Strap

996153482
KB290K0195-002: RNCC: 3 | RNVC: 2
KB290K0195-002: RNCC: 5 | RNVC: 9
0027V0006: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-974-9127
Webbing Strap

999749127
14088-031: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-99-800-9369
Dust And Moisture Seal Protective Plug

998009369
M241/15: RNCC: 3 | RNVC: 2
P24102Z010: RNCC: 5 | RNVC: 2

8 Dec 2004

5340-99-573-0732
Loop Clamp

995730732
B92-3110-01: RNCC: 3 | RNVC: 2
B92311001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-494-4771
Loop Clamp

994944771
187051: RNCC: 3 | RNVC: 2
FV2289138/22: RNCC: 5 | RNVC: 2
187051: RNCC: 5 | RNVC: 9

14 Aug 2007

5340-99-600-7453
Friction Catch Stud Receptacle

996007453
SRV1657-17-00: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-134-7813
Angle Bracket

991347813
1839-IK-DTL-01978: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-99-821-1638
Strap Assembly

998211638
SE10041-061-031: RNCC: 3 | RNVC: 2
491108-24-12: RNCC: 5 | RNVC: 2
SE10041-061-031SER1ESS: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-184-5624
Element

991845624
NO PRIMARY REF 99-184-5624: RNCC: 3 | RNVC: 2
R438565: RNCC: 5 | RNVC: 2
36AF6077274: RNCC: 6 | RNVC: 9

23 Apr 2002

5340-99-631-3461
General Purpose Resilient Mount

996313461
7002-5B: RNCC: 3 | RNVC: 2
PC53004-12: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-445-2023
Mounting Bracket

994452023
NO PRIMARY REF 99-445-2023: RNCC: 3 | RNVC: 2
ERR6835: RNCC: 5 | RNVC: 2
9914L0438: RNCC: 6 | RNVC: 9
(241)AE095ERR6835: RNCC: 8 | RNVC: 2
ERR6835: RNCC: 8 | RNVC: 2

10 Jul 1999

5340-99-104-4992
Angle Bracket

991044992
P2799: RNCC: 3 | RNVC: 2
3068-104BSH127: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-177-7365
Mounting Bracket

991777365
IM4848: RNCC: 3 | RNVC: 2
0516C-0007: RNCC: 6 | RNVC: 9

28 Apr 2005

5340-99-427-2946

5340-99-712-6433
Electrical-Mec Post

997126433
RSA59-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-284-3547
Catch Strike

992843547
BW 518541-1: RNCC: 3 | RNVC: 2
CV183913: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-99-968-3535
Access Cover

999683535
J55300504-003: RNCC: 3 | RNVC: 2

25 Jan 2003

5340-99-661-7367
Retaining Strap

5340-99-700-1281

5340-99-173-0682
Coupling Plate

5340-99-427-4846

5340-99-194-2696

5340-99-427-5694
Loop Clamp

5340-99-725-7597
Mounting Bracket

997257597
WD5018-00020-045: RNCC: 3 | RNVC: 2
WD5018-00020-045: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-99-222-6143

5340-99-347-0027

5340-99-338-7603
Dust Protective Cap

5340-99-223-5020

5340-99-612-0516
Grooved Clamp Coupling

996120516
C11601-20B: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-661-4094
Spring Tension Clip

5340-99-661-4079

5340-99-653-8587

5340-99-653-9165

5340-99-153-7963
Mechanical Stop

991537963
NO PRIMARY REF 99-153-7963: RNCC: 3 | RNVC: 2
5KM-17473-00: RNCC: 5 | RNVC: 2

27 Aug 2013

5340-99-663-5595
Spindle

996635595
7024-219: RNCC: 3 | RNVC: 2
LE441B3: RNCC: 6 | RNVC: 9
E022-299545: RNCC: 6 | RNVC: 9

16 Nov 1996

5340-99-465-8438
Padlock Hasp

994658438
NO PRIMARY REF 99-465-8438: RNCC: 3 | RNVC: 2
29G996: RNCC: 5 | RNVC: 2

29 Sep 1989

5340-99-456-8775
Loop Clamp

994568775
NO PRIMARY REF 99-456-8775: RNCC: 3 | RNVC: 2
Z9336: RNCC: 5 | RNVC: 1
23Z9336: RNCC: 5 | RNVC: 2
26TA5616: RNCC: 6 | RNVC: 9

7 Nov 1978

5340-99-598-7832
Dust And Moisture Seal Protective Cap

995987832
NO PRIMARY REF 99-598-7832: RNCC: 3 | RNVC: 2
8804-06: RNCC: 5 | RNVC: 2
CV150872: RNCC: 5 | RNVC: 2

31 Jan 2012

5340-99-051-6742
Double Angl Bracket

990516742
2609-4214-002: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-99-753-7045
Half Cleat

997537045
WG1381-0329-201: RNCC: 3 | RNVC: 2

27 Aug 2002

5340-99-729-7236
Mounting Bracket

997297236
EU5210B087-045: RNCC: 3 | RNVC: 2

22 Jun 2002

5340-99-435-1728
Rod End Connector

994351728
H13-88-805: RNCC: 3 | RNVC: 2
26SW95475: RNCC: 6 | RNVC: 9
26SW95475: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-553-6297
Spring Tension Clip

995536297
151-13606: RNCC: 3 | RNVC: 2
170-5346: RNCC: 5 | RNVC: 2

3 May 2012

5340-99-195-9000
Hook Assembly

5340-99-148-9797
Retaining Strap

5340-99-148-9768

5340-99-144-8754

5340-99-553-8343
Butt Hinge

995538343
0359007: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-99-131-9467
Banjo Union

991319467
G2SC203402: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-99-666-8404
Padlock

996668404
245691: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-99-179-5460
General Purpose Guard Rail Section

991795460
AK20431H013: RNCC: 3 | RNVC: 2
CV174305: RNCC: 5 | RNVC: 2

2 Dec 2010

5340-99-642-0196
Loop Clamp

5340-99-197-7109
Rim Clenching Clamp

5340-99-628-6090

5340-99-610-0956
Access Cover

5340-99-110-1872
Lock-Release Lever

5340-99-803-8492
Webb Strap Assembly

5340-99-781-1197
Dust Protective Cap

5340-99-204-8761
Fork End

5340-99-109-0150

5340-99-356-7683
General Purpose Resilient Mount

993567683
SR1304/10: RNCC: 3 | RNVC: 2
278-97/26: RNCC: 6 | RNVC: 9
ND1634-1: RNCC: 6 | RNVC: 9

16 Dec 1997

5340-99-111-4914
Base Plate

991114914
5501DT28 BASE PLATE: RNCC: 3 | RNVC: 2
5501 ITEM 6: RNCC: 5 | RNVC: 2
5501/6: RNCC: 5 | RNVC: 2
003504717 ITEM 6: RNCC: 5 | RNVC: 2
003504717/6: RNCC: 5 | RNVC: 2
1/5501/002 ITEM 6: RNCC: 5 | RNVC: 2
1/5501/002/6: RNCC: 5 | RNVC: 2
4/5501/002 ITEM 6: RNCC: 5 | RNVC: 2
4/5501/002/6: RNCC: 5 | RNVC: 2

19 Jul 2000

5340-99-136-0683
Dust And Moisture Seal Protective Cap

991360683
AGS2118-BB: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
AGS2118BB: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-763-3831
Ho Adaptor Assembly

997633831
STD/00075587: RNCC: 3 | RNVC: 2
15047391: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-99-725-1528
General Purpose Resilient Mount

997251528
ACP/00010264: RNCC: 3 | RNVC: 2
14770612: RNCC: 5 | RNVC: 2
10-02706-01: RNCC: 5 | RNVC: 2

31 Jul 2008

5340-99-586-0860
Rod End Clevis

995860860
913/00020: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-99-152-9139
Fairlead Parts Kit

991529139
53267: RNCC: 3 | RNVC: 2
A3-3113-A-1007: RNCC: 5 | RNVC: 2

27 Jan 2012

5340-99-498-9706
Mounting Bracket

994989706
70-40-9109: RNCC: 3 | RNVC: 2

17 Dec 2013

5340-99-549-6343
Manual Control Lever

995496343
KIT 8102: RNCC: 3 | RNVC: 2
0343X-001: RNCC: 6 | RNVC: 9

4 Nov 2003

5340-99-416-2932
Block Fairlead Section

994162932
EA2-75-415: RNCC: 3 | RNVC: 2
26FZ-5157: RNCC: 6 | RNVC: 9
26FZ5157: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-152-1956
Access Cover

991521956
36156-1181: RNCC: 3 | RNVC: 1
QCA/36156-1181: RNCC: 5 | RNVC: 2

20 Jun 2011

5340-99-476-5266
Line Block Assembly

994765266
201042330: RNCC: 1 | RNVC: 2
TA 30300393: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-99-477-7572
Strap Assembly

994777572
DRDY01654: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-99-438-5478
Access Cover

994385478
AM 02 13 21002: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-99-321-5862
Mounting Bracket

993215862
AS69352: RNCC: 3 | RNVC: 2
FO9800G0225: RNCC: 6 | RNVC: 9

5 May 1998

5340-99-562-8517
Handwheel

995628517
ACC59005: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-99-511-0370
Mounting Plate

995110370
FV2283490: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-611-0757
Mounting Plate

996110757
1371087C13: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-199-1203
Protection Of Blank

991991203
L3C60112: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-99-508-2922
Mounting Bracket

995082922
FV2295029: RNCC: 3 | RNVC: 2

4 Feb 2010

5340-99-711-3675
Dust And Moisture Seal Protective Plug

997113675
25UM93: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-419-7530
Spacing Threaded Standoff

994197530
40001413: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-99-427-2816
Retaining Strap

994272816
BA97739: RNCC: 3 | RNVC: 2
BA97739: RNCC: 5 | RNVC: 9
36VV13211: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-100-1319
Rotating Shaft Eye Bracket

991001319
D21596881TEM1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-212-9474
Mounting Bracket

992129474
94075: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-99-629-1254
Angle Bracket

996291254
MDS0084: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-151-4585
Rope Guide Assembly

991514585
20468: RNCC: 3 | RNVC: 2
EKA20468: RNCC: 5 | RNVC: 2
81423526184: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-99-021-8704
Clip Bin

990218704
FV 2040316: RNCC: 3 | RNVC: 2

24 Feb 1992

5340-99-722-5212
Electrical-Mec Post

997225212
CK0340239: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-199-0316
Clamp Screw

991990316
FV653459: RNCC: 3 | RNVC: 2

8 Mar 1990

5340-99-649-9425
Mounting Bracket

996499425
11A2-80058: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-719-9371
Synchro Clamp

997199371
PTS.22: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-791-1018
Spring Tension Clip

5340-99-830-6333
Toggle Lever Catch Assembly

998306333
27-633MSZN: RNCC: 3 | RNVC: 2
27-633: RNCC: 5 | RNVC: 1
B10327: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-840-8229
Bumper

998408229
NO PRIMARY REF 99-840-8229: RNCC: 3 | RNVC: 2
OTI16: RNCC: 5 | RNVC: 2

18 Dec 2013

5340-99-721-2415
Webbing Strap

997212415
01152-2-01414-OL0.4M-FL-0.16M-T-: RNCC: 3 | RNVC: 1
AC/12/15/2201: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-99-647-3001
Bumper

996473001
FV797825: RNCC: 1 | RNVC: 2
508/8/07705/300: RNCC: 3 | RNVC: 2
SB601: RNCC: 3 | RNVC: 2
Z970058: RNCC: 5 | RNVC: 2
SB104R601: RNCC: 5 | RNVC: 2
Z60667: RNCC: 5 | RNVC: 2
ND15564R: RNCC: 5 | RNVC: 2
ND3152A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-201-4889
Rim Clenching Clamp

992014889
NO PRIMARY REF 99-201-4889: RNCC: 3 | RNVC: 2
12247: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-271-0572
Plug

992710572
25/223490: RNCC: 3 | RNVC: 2
08 200 960: RNCC: 6 | RNVC: 9

7 Oct 2011

5340-99-749-8085
Dust And Moisture Seal Protective Cap

997498085
01T-C-12221: RNCC: 3 | RNVC: 2
01TC12221: RNCC: 5 | RNVC: 2
01T-C-12221: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-117-4645
Access Cover

991174645
NO PRIMARY REF 99-117-4645: RNCC: 3 | RNVC: 2
7382-27: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-708-7212
Slide Assembly

997087212
BWU60-100: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-99-638-2957
Loop Clamp

996382957
703-18B10110: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-99-490-4711
Mounting Bracket

994904711
EU9910B021-109: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-99-415-7300
Standoff

994157300
358-074: RNCC: 3 | RNVC: 2
358-027B ITEM 36: RNCC: 5 | RNVC: 2
358-027B/36: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-99-255-6239
Spacing Threaded Standoff

992556239
293-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-151-8650
Mounting Bracket

991518650
NO PRIMARY REF 99-151-8650: RNCC: 3 | RNVC: 2
4004390: RNCC: 5 | RNVC: 2
4004390: RNCC: 5 | RNVC: 9
4004390: RNCC: 6 | RNVC: 9

17 Nov 2010

5340-99-391-1362
Mounting Bracket

993911362
NO PRIMARY REF 99-391-1362: RNCC: 3 | RNVC: 2
DP1O3464-0003: RNCC: 5 | RNVC: 2
O951-LET405076: RNCC: 6 | RNVC: 9

24 Jul 2001

5340-99-382-6167
Block Clamp

993826167
110087-4129: RNCC: 3 | RNVC: 2
26VC21598: RNCC: 6 | RNVC: 9

10 Apr 2002

5340-99-146-6473
Angle Bracket

991466473
SS1061-243: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-259-6061
Mounting Bracket

992596061
0693D05001-041: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-99-433-7051
General Purpose Resilient Mount

994337051
NO PRIMARY REF 99-433-7051: RNCC: 3 | RNVC: 2
STC4142: RNCC: 5 | RNVC: 2
FJ9914L0071: RNCC: 6 | RNVC: 9

9 Jul 1999

5340-99-739-5015
Cable Retai Bracket

997395015
C.H.740001282.: RNCC: 3 | RNVC: 2
CH74000/282: RNCC: 5 | RNVC: 2

26 Feb 1987

5340-99-743-3661
Electrical-Mec Post

997433661
603/2/18639: RNCC: 3 | RNVC: 2
603-2-18639: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-765-4023
Rod End Clevis

997654023
UT24704: RNCC: 3 | RNVC: 2
MOD/A/245/156: RNCC: 5 | RNVC: 2

7 Oct 1992

5340-99-771-8194
Friction Catch

997718194
MBEU-44319: RNCC: 3 | RNVC: 2
B/MBEU-44319: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-549-5410
Aircraft Latch Assembly

995495410
EH203P1-040-224: RNCC: 1 | RNVC: 2
H120P-1-040-224: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-99-399-8055
Dus Protective Plug

993998055
NB-41-B-051: RNCC: 3 | RNVC: 2

14 May 1996

5340-99-782-0458
Bow Handle

997820458
1085-02224-04-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-741-5746
Extension Drawer Slide

997415746
C821-45LR-LEFT HAND: RNCC: 3 | RNVC: 2
46287-150-00-0: RNCC: 5 | RNVC: 2
531/4/24187/000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-670-5082
Retaining Strap

996705082
110045-5: RNCC: 3 | RNVC: 2
26VC-12196: RNCC: 6 | RNVC: 9

25 Aug 2004

5340-99-629-0304
Loop Clamp

996290304
AS41903-M12: RNCC: 2 | RNVC: 2
AS41903M12: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-732-8367
Retaining Band

997328367
MBEU63135-1: RNCC: 3 | RNVC: 2
A/MBEU63135-1: RNCC: 5 | RNVC: 2
MBEU63135-1: RNCC: 5 | RNVC: 2
A/MBEU63135-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-151-7463
Mounting Bracket

991517463
WG1451-0005-173: RNCC: 3 | RNVC: 2
105DY-005: RNCC: 6 | RNVC: 9

24 Aug 2010

5340-99-818-8304
Friction Catch

998188304
555-5: RNCC: 3 | RNVC: 2
555AGN: RNCC: 5 | RNVC: 2
3115427R91: RNCC: 5 | RNVC: 2
3704-76/ITEM/W: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-464-7163
Remote Station

994647163
SERVOLINE 32: RNCC: 3 | RNVC: 2
SR0922/10: RNCC: 5 | RNVC: 2
SR1026/10: RNCC: 5 | RNVC: 2
0858-90/1: RNCC: 6 | RNVC: 9
1173-93/10: RNCC: 6 | RNVC: 9

14 Aug 1997

5340-99-834-6492
Gas Detector

998346492
G101002.00: RNCC: 3 | RNVC: 2
SR0240/7: RNCC: 5 | RNVC: 2
SR0855/6: RNCC: 5 | RNVC: 2
SR1710/8: RNCC: 5 | RNVC: 2
SR9122/1: RNCC: 5 | RNVC: 2
TOXIGUARD: RNCC: 5 | RNVC: 2
121-96/1: RNCC: 6 | RNVC: 9
330-95/1: RNCC: 6 | RNVC: 9
417-94/1: RNCC: 6 | RNVC: 9
592-95/1: RNCC: 6 | RNVC: 9

30 Jul 1997

5340-99-645-1151
Rod End Clevis

996451151
WA9-83-2325: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-309-2487
Retaining Strap

993092487
SBS20WHITE: RNCC: 3 | RNVC: 2
600-414: RNCC: 5 | RNVC: 2
201000044: RNCC: 6 | RNVC: 9

1 Jul 2010

5340-99-814-2909
Roller Assembly

998142909
332/H6963: RNCC: 3 | RNVC: 2
BW617740-1: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-99-529-5937
Extension Drawer Slide

995295937
3513-132-1769: RNCC: 3 | RNVC: 2
1MS500-24AL: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-551-3161
Handle And Screw As

995513161
A2N21009722: RNCC: 3 | RNVC: 2
053CE-001: RNCC: 6 | RNVC: 9

4 Oct 2005

5340-99-715-8326
Angle Bracket

997158326
S6120-61252-5: RNCC: 3 | RNVC: 2

7 Nov 1978

5340-99-999-8826
Retaining Strap

999998826
AS1: RNCC: 3 | RNVC: 2
B07161: RNCC: 5 | RNVC: 2
A16-47462: RNCC: 5 | RNVC: 2
PC23974-1: RNCC: 5 | RNVC: 2
A16-47462: RNCC: 5 | RNVC: 2

5340-99-811-3560
Bellow

998113560
SR1734/7: RNCC: 3 | RNVC: 2
1143-94/1: RNCC: 6 | RNVC: 9
SR1734/7 MAIN ENG EXH: RNCC: 6 | RNVC: 9

19 Jan 1998

5340-99-726-0147
Electronic Equipment Hardware Kit

997260147
6228-140M: RNCC: 3 | RNVC: 2
V6228-140/12: RNCC: 5 | RNVC: 2
6228-140 ITEM 12: RNCC: 5 | RNVC: 2
6228-140/12: RNCC: 5 | RNVC: 2
V6228-140 ITEM 12: RNCC: 5 | RNVC: 2

24 Mar 1997

5340-99-101-2826
Retaining Strap

991012826
AS491-32: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-891-7431
Multiple Angle Bracket

998917431
WG1381-1961-10101: RNCC: 3 | RNVC: 2
XP98PC01087: RNCC: 6 | RNVC: 9

12 Mar 1998

5340-99-735-5525
Section Block Clamp

997355525
SL4858/B6BRB6B: RNCC: 3 | RNVC: 2
8B6BRB6B/SL485: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-474-5213
Lock Key

994745213
206-031801: RNCC: 3 | RNVC: 2
SKAEWMK7/ILS/100-2A: RNCC: 6 | RNVC: 9

16 May 2001

5340-99-555-6370
Plate

995556370
WG1410-7025-053: RNCC: 3 | RNVC: 2

24 May 2002

5340-99-947-9380
Screwed Spacer

999479380
NO PRIMARY REF 99-947-9380: RNCC: 3 | RNVC: 2
17-44652: RNCC: 5 | RNVC: 2
17-44652: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-459-5952
Mounting Bracket

994595952
25-2CF53A: RNCC: 3 | RNVC: 2
S25-2CF53A: RNCC: 6 | RNVC: 9
26TD7527: RNCC: 6 | RNVC: 9
26TD-7527: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-656-5993
Levelling Foot

996565993
818-210P: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-99-951-6370
Lock-Release Lever

999516370
ER2521B086-106: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-797-4968
Headrest Spring Stop

997974968
3A327-0453: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-99-967-3922
Headle Straight Rod

999673922
NM62648: RNCC: 3 | RNVC: 2
R0FN23485/35: RNCC: 5 | RNVC: 2
FL19284: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-912-9780
Dust And Moisture Seal Protective Cap

999129780
AVA64-7D: RNCC: 3 | RNVC: 2
27BA8901: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-150-6503
Quick Release Pin

991506503
NO PRIMARY REF 99-150-6503: RNCC: 3 | RNVC: 2
SRH13-83-587: RNCC: 5 | RNVC: 2
H13-83-587: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-99-549-6217
Dust And Moisture Seal Protective Cap-Plug

995496217
AI20-2238-A3: RNCC: 3 | RNVC: 2
AI20-2238-A3: RNCC: 5 | RNVC: 2
033C8-007: RNCC: 6 | RNVC: 9

4 Sep 2003

5340-99-280-7420
Mounting Bracket

992807420
100405-8010-013: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-99-916-0029
Mounting Bracket

999160029
EB8-81-3073: RNCC: 3 | RNVC: 2
26FZ-32510: RNCC: 6 | RNVC: 9

6 Jul 2001

5340-99-917-9018
Blank Cartridge

999179018
NO PRIMARY REF 99-917-9018: RNCC: 3 | RNVC: 2
356726: RNCC: 5 | RNVC: 2
C003-TK8000681: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-954-9020
Mounting Bracket

999549020
ER2521B107-043: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-553-3902
Butt Hinge

995533902
96-50-500-50: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-99-101-5084
Feathe Sealing Plug

991015084
NO PRIMARY REF 99-101-5084: RNCC: 3 | RNVC: 2
RU10843: RNCC: 5 | RNVC: 2
RU10843: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-99-517-1259
Double Angle Bracket

995171259
WG1381-3295-045: RNCC: 3 | RNVC: 2

21 May 1991

5340-99-392-5411
Mounting Bracket

993925411
4291: RNCC: 3 | RNVC: 2
ISTEC 4291-27B: RNCC: 5 | RNVC: 2

7 Mar 2013

5340-99-829-1186
Clip

998291186
FV684058-80: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-892-1099
Mounting Bracket

998921099
21490-176: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-99-833-8229
Fire Extingui Clamp

998338229
494-33574: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-832-3389
Cap Support

998323389
NO PRIMARY REF 99-832-3389: RNCC: 3 | RNVC: 2
3071980: RNCC: 5 | RNVC: 2
C581-LWM023409: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-163-5785
Collar

991635785
NO PRIMARY REF 99-163-5785: RNCC: 3 | RNVC: 2
S2684-1X: RNCC: 5 | RNVC: 2
526MM9957: RNCC: 6 | RNVC: 9

18 Feb 2003

5340-99-937-0545
Spacer

999370545
1172-IK-DTL-00551: RNCC: 3 | RNVC: 2
0231G-019: RNCC: 6 | RNVC: 9

4 Oct 2002

5340-99-947-9948
General Purpose Resilient Mount

999479948
17-168-1MN55: RNCC: 3 | RNVC: 2
GMC35430: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-562-2328
Loop Clamp

995622328
SST/Y/270/00/S001/154 SHEET 001-: RNCC: 3 | RNVC: 1
001293530: RNCC: 5 | RNVC: 1
001293530 PART 154: RNCC: 5 | RNVC: 1
001293530/154: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000/154: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/154: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000 PART 154: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-244-4995
Spring Retainer

992444995
P449F1365/2 ISSUE E: RNCC: 3 | RNVC: 2
P449F1365: RNCC: 5 | RNVC: 1
P449F1365 ITEM 2: RNCC: 5 | RNVC: 1
P449F1365/2: RNCC: 5 | RNVC: 1
P449F1365/2E: RNCC: 5 | RNVC: 2

6 Jan 1992

5340-99-439-7134
Spring Tension Clip

994397134
4-OWE-126528: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-99-888-7238
Spring Tension Clip

998887238
H1472.5: RNCC: 3 | RNVC: 2
A/447TNS/41 PC 88: RNCC: 5 | RNVC: 2

21 Dec 2010

5340-99-748-5089
Hook Handle

997485089
WG1519-0030-101: RNCC: 3 | RNVC: 2
1189N-012: RNCC: 6 | RNVC: 9

19 Jun 2009

5340-99-147-5448
Retaining Strap

991475448
110645-137: RNCC: 3 | RNVC: 2
26VC-11922: RNCC: 6 | RNVC: 9

13 Feb 2002

5340-99-154-3343
Block Fairlead Section

991543343
EB2810B005-105: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-99-151-7021
Cover

991517021
NO PRIMARY REF 99-151-7021: RNCC: 3 | RNVC: 2
G55830: RNCC: 5 | RNVC: 2
G55830: RNCC: 5 | RNVC: 9

13 Jul 2010

5340-99-992-1680
Mounting Bracket

999921680
5300-2014: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-99-207-5416

5340-99-254-4811
Filter Bracket

5340-99-542-9830
Access Cover

5340-99-346-8796
Loop Clamp

5340-99-202-9620

5340-99-320-4782
Spring Tension Clip

5340-99-314-5948
Mounting Plate

5340-99-255-4894
Quick Release Pin

5340-99-346-9386

5340-99-430-2778
Loop Clamp

994302778
34402: RNCC: 3 | RNVC: 2
36FF28844: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-913-5758
Retaining Strap

5340-99-977-7265
Dus Protective Plug

5340-99-250-7638
Spring Tension Clip

5340-99-911-1850
Clamp

5340-99-366-5269
Mounting Plate

993665269
AIR135740: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-418-3102
Angle Bracket

994183102
236/A2150/128: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-99-974-8883
Retaining Strap

999748883
WG1579-1026-101: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-99-645-8784
Dust And Moisture Seal Protective Cap

996458784
AGS2110-30: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-638-0824
Angle Bracket

996380824
SDA240435: RNCC: 3 | RNVC: 2
640-1-14780: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-209-6611
Turnbuckle

992096611
32111-1-21N: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-250-5357
Mounting Bracket

992505357
75A737609-2001: RNCC: 3 | RNVC: 2
75A737609-2001: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-125-8005
Bracket

991258005
3513-610-4886: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-99-457-4253
Mounting Plate

994574253
EA5334B196-101: RNCC: 3 | RNVC: 2
QE941ME4042: RNCC: 6 | RNVC: 9

25 Oct 1994

5340-99-612-8848
Mounting Bracket

996128848
121E-44-002-30-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-710-0051
Comp Helical Spring

997100051
NO PRIMARY REF 99-710-0051: RNCC: 3 | RNVC: 2
0780013: RNCC: 5 | RNVC: 2
H700-000037: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-659-9894
Grooved Clamp Coupling

996599894
1200-2S-15: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-221-0685
Retaining Strap

992210685
A65042-14: RNCC: 3 | RNVC: 2
A65042-14: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-208-8337
General Purpose Resilient Mount

992088337
NO PRIMARY REF 99-208-8337: RNCC: 3 | RNVC: 2
49350036: RNCC: 5 | RNVC: 2
17-3251MN50: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-450-9780
Bracket Lever Suppo

994509780
110164SHT141: RNCC: 3 | RNVC: 2
26VC/16207: RNCC: 6 | RNVC: 9

24 Jan 2002

5340-99-335-9788
General Purpose Resilient Mount

993359788
B502-A0005: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-99-985-9244
Support

999859244
WG1442-7010-073: RNCC: 3 | RNVC: 2

19 Jun 2002

5340-99-983-1964

5340-99-810-7571
Butt Hinge Leaf

998107571
P-870698-011: RNCC: 3 | RNVC: 2
P870698-011: RNCC: 5 | RNVC: 2

5 Jun 1997

5340-99-409-2102
Loop Clamp

994092102
NO PRIMARY REF 99-409-2102: RNCC: 3 | RNVC: 2
SE5641: RNCC: 5 | RNVC: 2
61CX40595: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-488-6673
Spring Tension Clip

994886673
LS101/17S-B: RNCC: 3 | RNVC: 2
ZJEF005507TRY-ITEM-077: RNCC: 5 | RNVC: 2
ZJEF005507TRY/077: RNCC: 5 | RNVC: 2
507-769: RNCC: 5 | RNVC: 2

20 Dec 2001

5340-99-499-7924
Strap Retaining Cab

994997924
915-4-07787-002: RNCC: 3 | RNVC: 2
NT20: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-102-4938
Dust And Moisture Seal Protective Cap-Plug

991024938
SP33028: RNCC: 3 | RNVC: 2
R5172 067740: RNCC: 5 | RNVC: 1
AQ330-28: RNCC: 5 | RNVC: 2
BKB503827-28: RNCC: 5 | RNVC: 2
SP330-28: RNCC: 5 | RNVC: 2
SP33028: RNCC: 5 | RNVC: 2
29911-1428: RNCC: 5 | RNVC: 2
R5172 067740/5: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-659-9405
Double Angle Bracket

996599405
P-914219-031: RNCC: 3 | RNVC: 2
P914219-031: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-765-1534
Butt Hinge Leaf

997651534
A-912482-007: RNCC: 3 | RNVC: 2
A912482-007: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-723-2311
Mounting Plate

997232311
P-080420-001: RNCC: 3 | RNVC: 2
P080420-001: RNCC: 5 | RNVC: 2
99-991-1102: RNCC: 6 | RNVC: 9

25 Jul 1997

5340-99-642-9454
Mounting Bracket

996429454
P-210059-403: RNCC: 3 | RNVC: 2
P210059-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-956-5961
Webbing Strap

999565961
SK/345/MLW: RNCC: 3 | RNVC: 2
01155-1-1-610: RNCC: 5 | RNVC: 2

29 Mar 1993

5340-99-639-5762
Bow Handle

996395762
689-1-11321: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-623-7832
Manual Control Handle

996237832
2/5423/101: RNCC: 3 | RNVC: 1

19 Dec 1992

5340-99-020-7325
Flexible Plug

990207325
SR1013-12687: RNCC: 3 | RNVC: 2
0044.3090: RNCC: 5 | RNVC: 2

18 Nov 1994

5340-99-300-3168
Top Strap

993003168
NO PRIMARY REF 99-300-3168: RNCC: 3 | RNVC: 2
2GZ9922: RNCC: 5 | RNVC: 2
26FP7840: RNCC: 5 | RNVC: 2

20 May 1991

5340-99-133-3534
Mounting Bracket

991333534
CU59068A: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-99-538-2126
Retaining Strap

995382126
RUA4031: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-742-7766
Helical Compression Spring Seat

997427766
33424107: RNCC: 3 | RNVC: 2
P106514H: RNCC: 5 | RNVC: 2
33424107: RNCC: 5 | RNVC: 2
02/101970: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-975-2082
Dust And Moisture Seal Protective Cover

999752082
471/54: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-99-152-7920
Bow Handle

991527920
331/43486: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-99-560-7028
Dust And Moisture Seal Protective Plug

995607028
Y3J17181A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-029-7506
Block Clamp

990297506
FV 2102964: RNCC: 3 | RNVC: 2
FV 2102964: RNCC: 5 | RNVC: 2

29 Aug 1989

5340-99-567-0573
Top Plate By Pass

995670573
ST30178: RNCC: 3 | RNVC: 2
001XZ-025: RNCC: 6 | RNVC: 9

20 Sep 2000

5340-99-116-8338

5340-99-116-2284

5340-99-710-5630
Dust And Moisture Seal Protective Cover

997105630
100A101132: RNCC: 3 | RNVC: 2
100A101132: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-331-8056
Section Block Clamp

993318056
FKT499003: RNCC: 3 | RNVC: 2
FK499003: RNCC: 5 | RNVC: 2

27 Jan 1993

5340-99-535-4588
Catch Plate

995354588
FV 2175960: RNCC: 3 | RNVC: 2
FV 2175960: RNCC: 5 | RNVC: 2

28 Mar 1994

5340-99-668-9916
Mechanic Equipment Hardware Kit

996689916
PE33007: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-99-558-8877
Helical Compression Spring Seat

995588877
BM33511: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-547-6823
Webbing Strap

995476823
FV 2157719: RNCC: 3 | RNVC: 2
FV 2157719: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-500-6542
Access Cover

995006542
S1068: RNCC: 3 | RNVC: 2

17 Apr 1997

5340-99-615-6177
Mounting Bracket

996156177
80033912: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-99-423-5795
Access Cover Plate

994235795
A21526-4: RNCC: 3 | RNVC: 2
576766: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-153-4739
Antipilferage Seal

991534739
WTP-6: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-99-370-8972
Dust And Moisture Seal Protective Cap-Plug

993708972
C111-GREEN: RNCC: 3 | RNVC: 2

14 Aug 1991

5340-99-427-1276
Dust And Moisture Seal Protective Plug

994271276
GP4308: RNCC: 3 | RNVC: 2
36VV13983: RNCC: 6 | RNVC: 9
36VV13983: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-213-2539
Lock Bar

992132539
64448: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-99-374-6930
Dust And Moisture Seal Protective Cap

993746930
MBEU192188: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-99-728-8410
Retaining Strap

5340-99-778-4930

5340-99-212-2726
Back Clamp

992122726
NKN 365: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-99-690-7102
Breather Cap

996907102
3788A003: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-99-929-7880
Mounting Plate

999297880
CS0974: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-99-562-3373
Loop Clamp

995623373
542606: RNCC: 3 | RNVC: 2
542606: RNCC: 5 | RNVC: 2

14 Sep 1993

5340-99-169-0631
Angle Bracket

991690631
2688W618: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-99-151-5494
Rod End Clevis

991515494
PE26980: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-99-378-7369
Manual Control Handle

993787369
MBEU270095: RNCC: 1 | RNVC: 2
5.104-750: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-99-950-0921
Manual Control Handle

999500921
S3S18372000: RNCC: 3 | RNVC: 2
S3S18372000: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-99-213-8775
Mounting Plate

992138775
PE34635: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-99-392-9489
Aneroid Blank

993929489
3855K000: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-99-596-9316
Nose Occluder Arm Assembly

995969316
CL 6567: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-99-613-3142
Mounting Actuator Plate

996133142
KP00082: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-99-940-6619
Mounting Bracket

999406619
PE34342: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-99-974-1839
Mounting Bracket

999741839
KP00105: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-99-126-2326
Protection Bellows

991262326
1-09815-01-00: RNCC: 3 | RNVC: 2
AB/2/1/1203/C: RNCC: 5 | RNVC: 2

5 Dec 1995

5340-99-276-1577
Mounting Bracket

992761577
43328913: RNCC: 3 | RNVC: 2

24 Aug 1999

5340-99-603-7040
Access Cover

996037040
B268189: RNCC: 3 | RNVC: 2
B268189: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-604-1629
Access Cover

996041629
A283918: RNCC: 3 | RNVC: 2
A283918: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-610-0586
Utility Resilient Mount

996100586
45845: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-724-7536
Mounting Plate

997247536
CS1726: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-99-736-6927
Spacing Threaded Standoff

997366927
270-47129: RNCC: 3 | RNVC: 2

13 Mar 2006

5340-99-308-8580
Line Supporting Strap

5340-99-365-4856
Spacing Threaded Standoff

993654856
EF612-100: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-99-579-7903
Nut Retaining Plate

995797903
ST21597: RNCC: 3 | RNVC: 2
S21597E-00: RNCC: 5 | RNVC: 2
020CR0030: RNCC: 6 | RNVC: 9

11 Feb 2002

5340-99-173-0805
Reeling For Bracket

991730805
25583-16: RNCC: 3 | RNVC: 2
SR1964/10: RNCC: 5 | RNVC: 2
1216-83/20: RNCC: 6 | RNVC: 9

8 Jan 1998

5340-99-772-1836
Expansion Shield

997721836
67-032: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-241-6021
Retaining Strap

992416021
VGS380-2009: RNCC: 3 | RNVC: 2
26VC17706: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-660-6744
Double Angle Bracket

996606744
BW506461-2: RNCC: 3 | RNVC: 2
506461 PART 2: RNCC: 5 | RNVC: 2
506461-2: RNCC: 5 | RNVC: 2
A3-506461 PART 2: RNCC: 5 | RNVC: 2
A3-506461-2: RNCC: 5 | RNVC: 2

20 Aug 1993

5340-99-544-7577
Access Cover

995447577
K167-20-1445: RNCC: 3 | RNVC: 2

7 Nov 1978

5340-99-647-6228
Electrical-Mec Post

996476228
A36-0635-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-189-4947
Mounting Plate

991894947
MS-3154-138: RNCC: 3 | RNVC: 2

2 May 2013

5340-99-820-8995
Doorknob

998208995
R133-2: RNCC: 3 | RNVC: 2
ACE95/B/01-1004: RNCC: 5 | RNVC: 2

28 Mar 1992

5340-99-653-4916
Spring Tension Clip

996534916
SD4-263435: RNCC: 3 | RNVC: 2
PT.0876-4-703536: RNCC: 5 | RNVC: 2
A4MY1062: RNCC: 5 | RNVC: 2
PT.0876-4-703536: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-725-7654
Clamping Catch

997257654
C61275/13: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-449-9741
Anti-Viewing Rod

994499741
236/A3100/139: RNCC: 3 | RNVC: 2

23 May 2002

5340-99-770-6629
Expansion Shield

997706629
M12E/44-447: RNCC: 3 | RNVC: 2
44-447/M12E: RNCC: 5 | RNVC: 2
WGE12MM: RNCC: 5 | RNVC: 2
44-447: RNCC: 6 | RNVC: 9
A2N20452721: RNCC: 6 | RNVC: 9
TSC503-061: RNCC: 6 | RNVC: 9
FW9925G0065: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-513-9002
Access Door

995139002
69302118-4: RNCC: 3 | RNVC: 2
69302118: RNCC: 5 | RNVC: 1
69302118 REFERENCE 4: RNCC: 5 | RNVC: 2

12 Mar 1996

5340-99-796-4184
Loop Clamp

997964184
RSGU1-12/15-1: RNCC: 3 | RNVC: 2
AB/2/3/1218: RNCC: 5 | RNVC: 2
ACU3649: RNCC: 5 | RNVC: 2
MM9169: RNCC: 5 | RNVC: 2
FV 2175914/7: RNCC: 6 | RNVC: 9
FV 2175914/7: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-476-6108
Caster Wheel

994766108
NO PRIMARY REF 99-476-6108: RNCC: 3 | RNVC: 2
KR82100NYB: RNCC: 5 | RNVC: 2

18 Apr 2008

5340-99-423-9821
Dust And Moisture Seal Protective Plug

994239821
N0D3175-12DET9: RNCC: 3 | RNVC: 2
141230: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-477-6294
Mounting Bracket

994776294
11644-011: RNCC: 3 | RNVC: 2

26 Jan 1994

5340-99-766-5360
Straps

997665360
08-94-771: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-208-7953
Resilient Mount

992087953
GEN2-920: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-422-2764
Rod End Connector

994222764
FRH120055-020: RNCC: 3 | RNVC: 2

19 Jul 2006

5340-99-877-8234
Angle Bracket

998778234
54-19-00125-00: RNCC: 3 | RNVC: 2

9 Dec 2011

5340-99-153-0971
Buckle

991530971
RB5050WH: RNCC: 3 | RNVC: 2
RB5050WH: RNCC: 5 | RNVC: 2
WSH-RTP17668TGMZ3: RNCC: 5 | RNVC: 2

9 May 2012

5340-99-639-9095
Angle Bracket

996399095
EH0344: RNCC: 3 | RNVC: 2
B21-32-0344: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-253-8127
Resilient Mount

992538127
362-00605: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-527-4104
Nonmetallic Solid Wheel

995274104
WAN3: RNCC: 3 | RNVC: 2
MEXE37660: RNCC: 5 | RNVC: 2
85-57-56-2-31703: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-630-8985
Electrical-Mec Post

996308985
SDA243930: RNCC: 3 | RNVC: 2
640-2-14916: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-194-1381
Screw Thread Insert

991941381
AS6316-3: RNCC: 2 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-570-0421
Mounting Bracket

995700421
3685501100: RNCC: 3 | RNVC: 2
D8119 ITEM 2: RNCC: 5 | RNVC: 2
D8119/2: RNCC: 5 | RNVC: 2
030421R1BC04101: RNCC: 6 | RNVC: 9

5 Dec 2003

5340-99-553-3381
Webbing Strap

995533381
5300-1988: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-99-768-7993
Swivel Castor

997687993
BSE 100 CP04: RNCC: 3 | RNVC: 2
GSE685/045: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-500-3821
Reed Valve Retainer

995003821
906/37066/04: RNCC: 3 | RNVC: 2

24 Nov 1995

5340-99-765-5896
Mounting Plate

997655896
M42186-608-01: RNCC: 3 | RNVC: 2
M42186-608: RNCC: 5 | RNVC: 2
42186-608: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-734-3527
Double Angle Bracket

997343527
MM4112A01/00101: RNCC: 3 | RNVC: 2
MM4112A: RNCC: 5 | RNVC: 2
989009085: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-746-8310
Bow Handle

997468310
PT5562-4-640139: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-779-4683
Access Cover

997794683
SST/M/615/05/0003 SHEET 011 ISS-: RNCC: 3 | RNVC: 1
001303722: RNCC: 5 | RNVC: 1
001303722 SHEET 013 ISSUE 009 P-: RNCC: 5 | RNVC: 1
SST/M/615/05/0003: RNCC: 5 | RNVC: 1
SST/M/615/05/0003 SHEET 013 ISS-: RNCC: 5 | RNVC: 1
SST/M/615/05/0003/011: RNCC: 5 | RNVC: 2
001303722 SHEET 011 ISSUE 002: RNCC: 5 | RNVC: 2

7 Oct 1992

5340-99-219-7647
Rod End Connector

992197647
GM-D-109580: RNCC: 3 | RNVC: 2
5777942: RNCC: 5 | RNVC: 2

23 Dec 1991

5340-99-386-8217
Loop Clamp

993868217
S037M08P: RNCC: 3 | RNVC: 2
80021434: RNCC: 5 | RNVC: 2
FV2289139/33: RNCC: 5 | RNVC: 2
0743K-016: RNCC: 6 | RNVC: 9

3 Aug 2007

5340-99-463-5599
Rod End Clevis

994635599
BB206-A1-69: RNCC: 3 | RNVC: 2
BB 204-A0-69 ITEM 4: RNCC: 5 | RNVC: 2
BB 204-A0-69-4: RNCC: 5 | RNVC: 2

5 Aug 1993

5340-99-657-5352
Mounting Bracket

996575352
P-530385-007: RNCC: 3 | RNVC: 2
P530385-007: RNCC: 5 | RNVC: 2

21 Jan 1981

5340-99-738-1086
Mounting Bracket

997381086
KB956K0332-000S: RNCC: 3 | RNVC: 2
KB956K0332-000: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-560-2500
General Purpose Resilient Mount

995602500
E22-02-50: RNCC: 3 | RNVC: 2
TYPEE22-02-50: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-168-9175
Pipe Hanger

991689175
EA3610B021-043: RNCC: 3 | RNVC: 2
941ME6753: RNCC: 6 | RNVC: 9

16 Dec 1994

5340-99-152-0949
Locking Wire

991520949
ACP/00000343 ITEM243: RNCC: 3 | RNVC: 2
ACP/00000343/243: RNCC: 5 | RNVC: 2
14872651: RNCC: 5 | RNVC: 2

3 May 2011

5340-99-254-7507
Loop Clamp

992547507
NRC7154: RNCC: 3 | RNVC: 2
A2/NRC7154: RNCC: 5 | RNVC: 2

1 Jun 1989

5340-99-151-3801

5340-99-156-3495

5340-99-529-1626
Loop Clamp

995291626
HD1300-11: RNCC: 3 | RNVC: 2
85-119-10-6-1726: RNCC: 5 | RNVC: 2

25 May 1990

5340-99-991-0850
Mounting Bracket

999910850
P-870263-407: RNCC: 3 | RNVC: 2
P870263-407: RNCC: 5 | RNVC: 2

9 Jun 1997