What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 41 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 41 of 368

5340-99-720-4128
Loop Clamp

5340-99-720-4712
Bow Handle

5340-99-842-1178
Retaining Strap

5340-99-812-7004
Mending Plate

5340-99-629-5394
Grooved Clamp Coupling

996295394
BA80018-9: RNCC: 3 | RNVC: 2
BA80018-9M: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-633-6109
Electrical-Mec Post

996336109
SDA219191: RNCC: 3 | RNVC: 2
640-2-09715: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-818-1689
Silencer Bracket

998181689
NO PRIMARY REF 99-818-1689: RNCC: 3 | RNVC: 2
G1Z2350E00-01: RNCC: 5 | RNVC: 2

2 May 2006

5340-99-485-2969
Hinge

994852969
NO PRIMARY REF 99-485-2969: RNCC: 3 | RNVC: 2
A488E: RNCC: 5 | RNVC: 2
C581-LWM044479: RNCC: 6 | RNVC: 9

16 Jun 2001

5340-99-027-6775
Screw Thread Insert

990276775
PHI-4BA: RNCC: 3 | RNVC: 2
1013: RNCC: 5 | RNVC: 2
DETAIL 1013: RNCC: 5 | RNVC: 2
SW112D1B: RNCC: 6 | RNVC: 9

11 Jun 1993

5340-99-495-6179

5340-99-221-5202

5340-99-462-8579

5340-99-499-9652
Rear Su Stowage Pad

5340-99-607-4872

5340-99-607-4159

5340-99-618-4371
Retaining Strap

5340-99-635-9168

5340-99-607-9978

5340-99-617-6677
Angle Bracket

5340-99-626-9424

5340-99-169-5800
Manual Control Lever

991695800
110033-6839: RNCC: 3 | RNVC: 2
26VC-5471: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-535-9861
Section Block Clamp

995359861
110045SHT379: RNCC: 3 | RNVC: 2
110045-379: RNCC: 5 | RNVC: 2
26VC-12430: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-700-0448
Loop Clamp

997000448
FBS730H: RNCC: 3 | RNVC: 2
H729-916141: RNCC: 6 | RNVC: 9
36AC1026: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-651-1905
Rod End Connector

996511905
WG1397-7160-101: RNCC: 3 | RNVC: 2

14 Feb 1980

5340-99-254-1180
Handwheel

992541180
LF1104-20NM-SDBG: RNCC: 3 | RNVC: 2
LF1104-20NM: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-273-7993
Mounting Bracket

992737993
EU5330B144-101: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-99-168-4641
Retaining Strap

991684641
83-MZ-271: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-422-7501
Swivel Castor

994227501
NO PRIMARY REF 99-422-7501: RNCC: 3 | RNVC: 2
4D2193: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-148-7637
Retaining Strap

991487637
1091F152: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-280-2807
Mounting Bracket

992802807
M2915066320000: RNCC: 3 | RNVC: 2

14 Nov 2013

5340-99-562-6741
Mounting Bracket

995626741
FV2284501: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-99-836-7640
Mounting Bracket

998367640
POG104583: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-99-836-2738
General Purpose Resilient Mount

998362738
FBK0002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-825-5767
Dust And Moisture Seal Boot

998255767
575854: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-3099
Butt Hinge

5340-99-818-7177

5340-99-140-1817

5340-99-800-9455

5340-99-130-9988
Endhook

5340-99-805-7298
Dust Protective Cap

5340-99-824-3355
Loop Clamp

5340-99-824-1162
Access Cover

5340-99-823-2629
Access Cover

5340-99-830-9026
Dust Protective Cap

5340-99-810-6074
Multiple An Bracket

5340-99-818-3793

5340-99-820-5446
Resilient Mount

5340-99-823-2669

5340-99-833-3178

5340-99-821-7688

5340-99-773-0918
Engine Accessory Bracket

997730918
LK43616: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-775-1764
Double Angle Bracket

997751764
CB0100149: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-805-0860
Loop Clamp

998050860
FV246328-8: RNCC: 3 | RNVC: 2
LV6MT4-78332: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-772-5453
Rim Lock

997725453
FS1: RNCC: 3 | RNVC: 1
D2305: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-841-2095
Mounting Plate Asse

998412095
H39-0567-06: RNCC: 3 | RNVC: 2
H-39-0567-06: RNCC: 8 | RNVC: 1

28 Nov 2001

5340-99-309-6690
Mounting Bracket

993096690
EU9910B021-107: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-99-774-3473
Latch Assembly

997743473
EM42524: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-837-1106
Rod End Clevis

998371106
NB3130-015-041: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-99-734-3515
Angle Bracket

997343515
MM4032A01/00101: RNCC: 3 | RNVC: 2
MM4032A: RNCC: 5 | RNVC: 2
989009073: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-768-9033
Engine Accessory Bracket

997689033
JJ108606: RNCC: 3 | RNVC: 2
JJ108606: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-728-6269
Gaiter

997286269
262-02903: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-751-9556
Electrical-Mec Post

997519556
NDN7684/293: RNCC: 3 | RNVC: 2
6A/21758: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-747-4477
Quick Release Pin

997474477
BLDC6-32: RNCC: 3 | RNVC: 2
100347-9000-104: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-758-3091
Handle Grip

997583091
S21394: RNCC: 3 | RNVC: 2
42250 HAND GRIP: RNCC: 5 | RNVC: 2
J313-377337: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-983-0919
Loop Clamp

999830919
3747-130: RNCC: 3 | RNVC: 2

20 Aug 2002

5340-99-793-5153
Expansion Plug

997935153
642/27: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-534-4521
Dirt And Liquid Deflector

995344521
NO PRIMARY REF 99-534-4521: RNCC: 3 | RNVC: 2
TZ453539: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-747-9973
Line Supporting Strap

997479973
TY-53M: RNCC: 3 | RNVC: 2
39-9085: RNCC: 5 | RNVC: 2
23789-5500-2692: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-577-3151
Mounting Plate

995773151
7330/003/03/000: RNCC: 3 | RNVC: 2
7330/003/03/000: RNCC: 5 | RNVC: 2

24 Oct 1992

5340-99-253-7012
Access Cover

992537012
3816/30355: RNCC: 3 | RNVC: 2
B3816/30355: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-195-4493
Shim

991954493
NO PRIMARY REF 99-195-4493: RNCC: 3 | RNVC: 2
A65004-213: RNCC: 5 | RNVC: 2

19 Aug 1986

5340-99-782-6395
Clamp Loop

997826395
946-302-01: RNCC: 3 | RNVC: 2
94630201: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-549-6087
Ove Damper Assembly

995496087
9522: RNCC: 3 | RNVC: 2
032RC-019: RNCC: 6 | RNVC: 9

23 Jul 2003

5340-99-459-7457
Mounting Plate

994597457
25CX575: RNCC: 3 | RNVC: 2
25CX575: RNCC: 5 | RNVC: 2
26TD1616: RNCC: 6 | RNVC: 9
26TD-1616: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-877-1689
Mounting Plate

998771689
OPTIMA YTS 5.5: RNCC: 3 | RNVC: 2

10 Jun 2006

5340-99-493-0050
Bail Handle

994930050
651-H-SS: RNCC: 3 | RNVC: 2

25 Jul 2012

5340-99-925-0912
Slide Ring

999250912
G 53206: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-99-880-8177
Loop Clamp

998808177
716.1.18.036.1: RNCC: 3 | RNVC: 2
716.1.18.036.1: RNCC: 5 | RNVC: 2

27 Jun 1994

5340-99-915-4552
Quick Release Pin

999154552
52917.C.10.GT.30.L6.C.7: RNCC: 3 | RNVC: 2

1 Dec 2001

5340-99-875-6938
Vibration Absorber

998756938
2 0044-571: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-99-330-1670
Instrument Mounting Clamp

993301670
64-99-096: RNCC: 3 | RNVC: 2
64-99-096: RNCC: 5 | RNVC: 2
64-99-0963: RNCC: 6 | RNVC: 9

6 Jul 1994

5340-99-166-5682
Pivot Pin

991665682
DR-3229-0312-DT: RNCC: 3 | RNVC: 2
053ZF-003: RNCC: 6 | RNVC: 9

15 Nov 2005

5340-99-420-7231
Bracket

994207231
NO PRIMARY REF 99-420-7231: RNCC: 3 | RNVC: 2
SDA127809: RNCC: 5 | RNVC: 9
Z1ZA44074: RNCC: 6 | RNVC: 9

13 Apr 1977

5340-99-561-4156
Rubber Bumper

995614156
A1747-507: RNCC: 3 | RNVC: 2
1747-507: RNCC: 5 | RNVC: 2
H657-925566: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-151-8868
Snap Ring

991518868
NO PRIMARY REF 99-151-8868: RNCC: 3 | RNVC: 2
5953: RNCC: 5 | RNVC: 2

29 Nov 2010

5340-99-655-7322
Dust And Moisture Seal Protective Cap-Plug

996557322
PVX81-14C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-746-5938
C Modification Kit

997465938
003503849: RNCC: 3 | RNVC: 2
003503849/01: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-873-4711
Webbing Strap

998734711
5/1781: RNCC: 3 | RNVC: 2
PRO-OB-SSK: RNCC: 5 | RNVC: 2

15 Nov 1996

5340-99-731-1650
Mounting Bracket

997311650
PT5562-2-719177: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-853-5809
Clamp

998535809
SSK/M/900/90/0001 SHT 3: RNCC: 3 | RNVC: 2
001280983/003: RNCC: 5 | RNVC: 2

26 Mar 2008

5340-99-156-3466
Angle Bracket

991563466
P-211578-029: RNCC: 3 | RNVC: 2
P211578-029: RNCC: 5 | RNVC: 2

13 Apr 1994

5340-99-930-5075
Loop Clamp

999305075
B37182/1: RNCC: 3 | RNVC: 2
B37182: RNCC: 5 | RNVC: 1
B37182/2: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-535-2666
Retaining Strap

995352666
YJ 32194L: RNCC: 3 | RNVC: 2
YJ 32194L/3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-583-0865
Dust And Moisture Seal Boot

995830865
006-10004: RNCC: 3 | RNVC: 2
0512K-003: RNCC: 6 | RNVC: 9
0516V-0002: RNCC: 6 | RNVC: 9

4 Apr 2005

5340-99-832-6393
Mounting Plate

998326393
ER5331B066-041: RNCC: 3 | RNVC: 2
971MEQ954: RNCC: 6 | RNVC: 9

26 Aug 1997

5340-99-797-1854
Utility Resilient Mount

997971854
3-4819-8-131: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-1896
Access Cover

999581896
NB-90-2033: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-99-814-8612
Loop Clamp

998148612
HD.1300-12: RNCC: 3 | RNVC: 2
HD.1300: RNCC: 5 | RNVC: 1
91730244: RNCC: 5 | RNVC: 2
040179: RNCC: 5 | RNVC: 2
9103280012: RNCC: 5 | RNVC: 2
581-21-012: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-894-0828
Mounting Bracket

998940828
08009801: RNCC: 3 | RNVC: 2
ED/080/098: RNCC: 5 | RNVC: 2

11 Aug 1993

5340-99-728-0925
Handwheel

997280925
LF1104-191-FCUC: RNCC: 3 | RNVC: 2
LF1104: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-958-3769
Bow Handle

999583769
WG1510-0096-101: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-99-911-2130
Winding Handle

999112130
83/317T1: RNCC: 3 | RNVC: 2
0428R-001: RNCC: 6 | RNVC: 9

7 Jul 2004

5340-99-143-7772
Angle Bracket

991437772
SC5-84-112: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-549-4672
Hook

995494672
25-2DP119: RNCC: 3 | RNVC: 2
26TD-6899: RNCC: 6 | RNVC: 9

21 Jun 2002

5340-99-500-6304
Double Angle Bracket

995006304
AA-2323-168: RNCC: 3 | RNVC: 2
03286-017: RNCC: 6 | RNVC: 9

20 Jun 2003

5340-99-164-4156
Fastener Set

991644156
008008: RNCC: 3 | RNVC: 2
060LK-001: RNCC: 6 | RNVC: 9

28 Feb 2006

5340-99-339-4729
Block Clamp

993394729
110087-2789: RNCC: 3 | RNVC: 2
26VC24231: RNCC: 6 | RNVC: 9

30 Jan 2002

5340-99-612-8534
Mounting Bracket

996128534
121E-45-502-231: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-255-0697
Bracket

992550697
WG1350-0013-233: RNCC: 3 | RNVC: 2

19 Feb 2004

5340-99-814-2168
Dust And Moisture Seal Protective Cap

998142168
MISC-1353: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-99-814-5073
Anode

998145073
PPEC1202-MM100 - 75A: RNCC: 3 | RNVC: 2

1 Dec 2009

5340-99-809-5253
Turnbuckle Assembly

998095253
G15-0944: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-307-8037
Friction Catch

993078037
1841-IK-FAB-03157: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-99-821-2851
Plate

998212851
EB5332B087-101: RNCC: 3 | RNVC: 2
981MET883: RNCC: 6 | RNVC: 9

28 Apr 1998

5340-99-800-4975
Dust And Moisture Seal Protective Plug

998004975
KX3121103: RNCC: 3 | RNVC: 2
50-108891: RNCC: 5 | RNVC: 2
HPK0006: RNCC: 5 | RNVC: 2

31 Aug 1988

5340-99-958-5389
Angle Bracket

999585389
828251-00: RNCC: 3 | RNVC: 2

31 Jan 2011

5340-99-226-1315
Seal Retaining Plate

992261315
NO PRIMARY REF 99-226-1315: RNCC: 3 | RNVC: 2
DB10X10V D4500 ITEM 90A: RNCC: 5 | RNVC: 2
DB10X10V D4500 ITEM 90A: RNCC: 5 | RNVC: 9

16 Feb 2011

5340-99-524-7430
Ring Tolerance

995247430
BN068037: RNCC: 3 | RNVC: 2
RUA1194: RNCC: 5 | RNVC: 1
743-524-7430: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-646-1167
Loop Clamp

996461167
703-18-4-11762: RNCC: 3 | RNVC: 2

20 May 1988

5340-99-537-9589
Hand Crank

995379589
C/42/327: RNCC: 3 | RNVC: 1
002542443: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-767-9581
Detent Plunger

997679581
NOD 3210/238: RNCC: 3 | RNVC: 2
GR28689: RNCC: 5 | RNVC: 2

19 Mar 1990

5340-99-256-3292
Dust And Moisture Seal Protective Cap

992563292
12906: RNCC: 3 | RNVC: 2
40624/G/506 SHT 2: RNCC: 5 | RNVC: 1
4183: RNCC: 5 | RNVC: 1
SR1340: RNCC: 5 | RNVC: 1

24 Sep 1992

5340-99-593-1814
Mounting Bracket

995931814
FV3029036: RNCC: 3 | RNVC: 2
BR90/16-69-02-1004: RNCC: 5 | RNVC: 2
FL002540029: RNCC: 6 | RNVC: 9

20 Oct 2000

5340-99-310-0695
Clamping Catch

993100695
61-1750: RNCC: 3 | RNVC: 2
PA1334-2011/7: RNCC: 5 | RNVC: 2
PA1334-2011 ITEM 7: RNCC: 5 | RNVC: 2
PA1334-0001: RNCC: 6 | RNVC: 9

7 Oct 2010

5340-99-746-2400
Butt Hinge

997462400
0785LH: RNCC: 3 | RNVC: 2
SM42/386/17/82: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-867-3616
Dust And Moisture Seal Protective Cap

998673616
SC/A2/48538/2: RNCC: 3 | RNVC: 2
SC/A2/48538/2: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-779-9874
Dust Cap Assembly

997799874
A/MBEU-64577: RNCC: 3 | RNVC: 2
MBEU64577: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-577-8339
Mounting Bracket

995778339
WG1573-0087-101: RNCC: 3 | RNVC: 2
120VJ-017: RNCC: 6 | RNVC: 9

4 Apr 2009

5340-99-657-5157
Electrical-Mec Post

996575157
FV964502: RNCC: 3 | RNVC: 2
17325-162: RNCC: 5 | RNVC: 1

10 Aug 1981

5340-99-414-6498
Mounting Bracket

994146498
EA5333B498-043: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-99-335-4870
Clip

993354870
CH74558: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
H217-352975: RNCC: 6 | RNVC: 9

4 May 1996

5340-99-204-6537
Access Cover

992046537
201-10494: RNCC: 3 | RNVC: 2
201-10492: RNCC: 5 | RNVC: 2
61LS40369: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-628-0406
Screw Thread Insert

5340-99-783-8199
Loop Clamp

5340-99-829-9598
Door Catch

5340-99-791-7894

5340-99-792-1931

5340-99-830-8697
Retaining Clip

5340-99-802-5998
Retaining Strap

5340-99-561-6604

5340-99-812-6201
Handwheel

5340-99-756-4760
Webbing Strap

5340-99-756-4767
Coat And Hat Hook

5340-99-606-3770

5340-99-634-7645

5340-99-952-1759

5340-99-795-2576
Mounting Bracket

5340-99-917-0172
General Purpose Resilient Mount

999170172
NO PRIMARY REF 99-917-0172: RNCC: 3 | RNVC: 2
6339100: RNCC: 5 | RNVC: 2
6339100: RNCC: 5 | RNVC: 9

22 Nov 2010

5340-99-400-2448
Mounting Bracket

994002448
391-320-040: RNCC: 3 | RNVC: 2

28 Jan 2011

5340-99-102-8559
Angle Bracket

991028559
5499F: RNCC: 3 | RNVC: 2
37-614-134-05: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-582-5914
Angle Bracket

995825914
NO PRIMARY REF 99-582-5914: RNCC: 3 | RNVC: 2
368-2857: RNCC: 5 | RNVC: 2

5 May 2011

5340-99-441-5647
Motor Mount Bracket

994415647
GM-B112919: RNCC: 3 | RNVC: 2
DO75-1918: RNCC: 5 | RNVC: 2
GMB112919: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-442-8158
Bumper

994428158
EU2580F007-101: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-99-852-9656
Mounting Plate

998529656
EN8375599: RNCC: 3 | RNVC: 2
020XJ-001: RNCC: 6 | RNVC: 9

21 Mar 2002

5340-99-799-7996
Mounting Plate

997997996
70-55-960: RNCC: 3 | RNVC: 2

16 Jul 2008

5340-99-582-5641
Mounting Bracket

995825641
WG1310-1027-043: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-99-633-7678
Screw Thread Insert

996337678
GW4831105-2104: RNCC: 1 | RNVC: 2
3585-06CNX0.207IN: RNCC: 3 | RNVC: 1
B08975: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-548-8847
Rod End Clevis

995488847
SSN07M141-86-2-78: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-004-1385
Grooved Clamp Coupling

990041385
C6045-34-A: RNCC: 3 | RNVC: 2
96PL04-012: RNCC: 6 | RNVC: 9

14 Dec 1996

5340-99-476-5501
Pipe Hanger

994765501
110655-1215: RNCC: 3 | RNVC: 2
26VC-24302: RNCC: 6 | RNVC: 9

9 Mar 2002

5340-99-146-2711
Mounting Bracket

991462711
WD01-10-91630: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-99-604-1387
Loop Clamp

996041387
BA50004-14: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-789-0345
Grooved Clamp Coupling

997890345
62-99-174-082-0150: RNCC: 3 | RNVC: 2
9560141570: RNCC: 5 | RNVC: 2
L952955: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-633-7402
Angle Bracket

996337402
A3990-62221: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-420-7126
Retaining Strap

994207126
PC85642: RNCC: 3 | RNVC: 2
SDA85778: RNCC: 5 | RNVC: 1
PC85642: RNCC: 5 | RNVC: 9
Z2-43880: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-613-6463
Mounting Bracket

996136463
GD601453-01: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-99-551-4171
Mounting Bracket

995514171
FV2269260: RNCC: 3 | RNVC: 2
0646G-004: RNCC: 6 | RNVC: 9

13 Sep 2006

5340-99-432-2377
Clip

994322377
NO PRIMARY REF 99-432-2377: RNCC: 3 | RNVC: 2
6397771: RNCC: 5 | RNVC: 1
18269: RNCC: 5 | RNVC: 2
1568677: RNCC: 5 | RNVC: 2
1425296: RNCC: 5 | RNVC: 2
3024E3K663B: RNCC: 5 | RNVC: 2
S16-119: RNCC: 5 | RNVC: 2
3024E3K663B2: RNCC: 5 | RNVC: 2
18269: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-666-2635
Clip

996662635
NO PRIMARY REF 99-666-2635: RNCC: 3 | RNVC: 2
WB2571-30: RNCC: 5 | RNVC: 2
26VC-10930: RNCC: 6 | RNVC: 9

22 Sep 2004

5340-99-582-5798
Retaining Strap

995825798
J92300404-003: RNCC: 3 | RNVC: 2
074X6-101: RNCC: 6 | RNVC: 9

23 Jun 2007

5340-99-908-2259
Mounting Bracket

999082259
FV 3029959: RNCC: 3 | RNVC: 2
FV 3029959: RNCC: 5 | RNVC: 2
032F4-011: RNCC: 6 | RNVC: 9

30 Jun 2003

5340-99-790-2208
Block Clamp

997902208
75A697324-2005: RNCC: 3 | RNVC: 2
75A697324-2005: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-331-1532
Angle Bracket

993311532
RCD5329: RNCC: 3 | RNVC: 2

7 Dec 1996

5340-99-213-1273
Lock Key

992131273
A701250: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-99-133-6378
Line Supporting Strap

991336378
PC24743: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-99-500-3993
Rod End Clevis

995003993
AML 46270: RNCC: 3 | RNVC: 2
FL9630H0020: RNCC: 6 | RNVC: 9

9 Jan 1996

5340-99-300-6901
Access Cover

993006901
NLK840: RNCC: 3 | RNVC: 2

23 Apr 1993

5340-99-558-1944
Dust And Moisture Seal Protective Cap

995581944
D23889: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-314-3130
Line Supporting Strap

993143130
T80I: RNCC: 3 | RNVC: 2
190-4082: RNCC: 5 | RNVC: 2
190-4082: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-99-763-1756

5340-99-762-7914

5340-99-591-1971
Bracket Prop Stand

995911971
B34: RNCC: 3 | RNVC: 2
0136I-033: RNCC: 6 | RNVC: 9

7 Dec 2001

5340-99-765-4766
Loop Clamp

997654766
3048292: RNCC: 3 | RNVC: 2
3048292: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-99-161-4395
Mounting Bracket

991614395
100402-1321-ASY: RNCC: 3 | RNVC: 2
L528621: RNCC: 5 | RNVC: 2
100402-1321-ASY: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-99-605-7973
Angle Bracket

996057973
FV 2214118: RNCC: 3 | RNVC: 2

30 Jan 1995

5340-99-500-6652
Access Cover

995006652
AS69991: RNCC: 3 | RNVC: 2
FO965830309: RNCC: 6 | RNVC: 9

15 May 1997

5340-99-148-1161
Manual Control Handle

991481161
PN00004680: RNCC: 3 | RNVC: 2

12 Mar 2009

5340-99-639-9569
Extension Drawer Slide

996399569
BD601914: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-255-2486
Expansion Plug

992552486
ST33628: RNCC: 3 | RNVC: 2
PST33628: RNCC: 5 | RNVC: 2

26 Feb 1991

5340-99-255-3222
Bow Handle

992553222
FV2033020: RNCC: 3 | RNVC: 2
FV2033020: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-99-450-3568
Filler Opening Cap

994503568
FV 2110974: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-99-717-9409
Angle Bracket

997179409
815227: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-701-0125
General Purpose Resilient Mount

997010125
GB C (SH) 1010 T M 6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-146-6671
T Bracket

991466671
S6120-65135-14: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-781-2482
Retaining Strap

997812482
C.H.75568: RNCC: 3 | RNVC: 2
H217-353278: RNCC: 6 | RNVC: 9
0920-353278: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-180-3672
Protection Bellows

991803672
110082-10970: RNCC: 3 | RNVC: 2
092F2-001: RNCC: 6 | RNVC: 9

1 Jun 2009

5340-99-075-0422
Mounting Bracket

990750422
P-870219-401: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-603-1667
Double Angle Bracket

996031667
B239647-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-971-3834
Resilient Mount

999713834
BSR15: RNCC: 3 | RNVC: 2
PH54102-8: RNCC: 5 | RNVC: 2
10A15423: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-404-6793
Retaining Strap

994046793
DS112-9: RNCC: 3 | RNVC: 2
X3XCDNDS112-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-601-5600
Retaining Strap

996015600
AS2424-11 3-4: RNCC: 2 | RNVC: 2

25 Apr 1991

5340-99-151-4341
Mounting Plate

991514341
3201-25054-20-3: RNCC: 3 | RNVC: 2

27 Oct 2009

5340-99-735-4761
Mounting Bracket

997354761
01TC13943: RNCC: 3 | RNVC: 2
01T-C-13943: RNCC: 5 | RNVC: 2
01TC13943: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-771-2531
Support Bracket

997712531
62B41: RNCC: 3 | RNVC: 2
503/4/13582/000: RNCC: 5 | RNVC: 2
989006021: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-747-1807
Access Cover

997471807
A3/1256/675.3: RNCC: 3 | RNVC: 2
1256/675.3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-500-8553
Multiple Angle Bracket

995008553
EU9910A006-101: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-99-392-9417
Double Angle Bracket

993929417
HH2/MV4981: RNCC: 3 | RNVC: 2

17 Mar 1995

5340-99-494-2072
Cushioning Pad

994942072
J04200062-ITEM-066: RNCC: 3 | RNVC: 2
1077J-022: RNCC: 5 | RNVC: 2

13 Nov 2010

5340-99-416-8510
Mounting Bracket

994168510
EB8-83-952: RNCC: 3 | RNVC: 2
26FZ-13533: RNCC: 6 | RNVC: 9
26FZ13533: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-145-7777
Escutcheon Plate

991457777
S6120-61373: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-398-1015
Mounting Plate

993981015
A2810546-001: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-99-340-5146
General Purpose Resilient Mount

993405146
FV2249341: RNCC: 3 | RNVC: 2
E1E 12 S33AL: RNCC: 5 | RNVC: 2
0657Z-013: RNCC: 6 | RNVC: 9

9 Nov 2006

5340-99-000-4213
Spacing Threaded Standoff

990004213
60401-035: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-99-276-2036
Latch Assembly

992762036
38454-268: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-99-332-3924
Retaining Strap

993323924
C8A5: RNCC: 3 | RNVC: 2
41ZZ1367: RNCC: 6 | RNVC: 9
921-323924: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-923-5869
Comp Helical Spring

999235869
CS833: RNCC: 3 | RNVC: 2
85-25-56-7-11702: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-282-7221
Loop Clamp

992827221
PCZR21RS: RNCC: 3 | RNVC: 2
298-8047: RNCC: 5 | RNVC: 2
0326V-016: RNCC: 6 | RNVC: 9

17 Jun 2003

5340-99-641-8116
Tubular Fairlead Half

996418116
WG1381-3303-105: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-867-7915
Clamp Assembly

998677915
456-033: RNCC: 3 | RNVC: 2
1487-000 ITEM 9: RNCC: 5 | RNVC: 2
A7370: RNCC: 5 | RNVC: 2

8 Dec 1992

5340-99-131-1103
Handle Assembly

991311103
60015-02: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-99-429-9809
Spring Tension Clip

994299809
E33705-282: RNCC: 3 | RNVC: 2
88300-300-107: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-619-5850
Mounting Bracket

996195850
ER9440F016-042: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-553-7660
Protection Cap

995537660
ECP221910-02: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-99-715-8220
Angle Bracket

997158220
WD01-81-23017: RNCC: 3 | RNVC: 2

7 Nov 1978

5340-99-429-9230
Retaining Strap

994299230
NO PRIMARY REF 99-429-9230: RNCC: 3 | RNVC: 2
TF179C24: RNCC: 5 | RNVC: 2
KGCCTF179C24: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-771-5259
Helical Compression Spring Seat

997715259
NE30708: RNCC: 3 | RNVC: 1
QCA/NE30708: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-957-6928
Angle Bracket

999576928
EA5300V047-001: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-99-840-6736
Grabber Catch

998406736
GS-00564: RNCC: 3 | RNVC: 2
4414-129: RNCC: 6 | RNVC: 9

8 Nov 2013

5340-99-840-2227
Mechanical Stop

998402227
B04405-04027: RNCC: 3 | RNVC: 2
T14-07-P248 ITEM 18: RNCC: 5 | RNVC: 2

23 Aug 2006

5340-99-950-8344
Comp Helical Spring

999508344
NO PRIMARY REF 99-950-8344: RNCC: 3 | RNVC: 2
A352226: RNCC: 5 | RNVC: 2
80-08-81-0469: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-136-6004
Rigid Castor

991366004
KVF8SUB: RNCC: 3 | RNVC: 2
954-11009: RNCC: 5 | RNVC: 2
26VC-96139: RNCC: 6 | RNVC: 9
26VC96139: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-702-4453
Dust And Moisture Seal Protective Cap

997024453
8021-0038-07: RNCC: 3 | RNVC: 2

14 Aug 1997

5340-99-200-3315
Rod End Clevis

992003315
202-12001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-402-2162
Handle Assembly

994022162
EU5330B209-041: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-99-146-7285
Disc

991467285
S65361-04005-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-666-1664
Rack B Comp

996661664
809295/002: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-558-5280
Plain Solid Disc

995585280
SSBN01-516-828-9: RNCC: 3 | RNVC: 2
516-828-9: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-780-3984
Rod End Connector

997803984
A7263 PART 1: RNCC: 3 | RNVC: 2
A7263/1: RNCC: 5 | RNVC: 2
190-788292: RNCC: 6 | RNVC: 9

17 Aug 1987

5340-99-254-8501
Bow Handle

992548501
23/0/20032: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-99-422-8409
Fork End

994228409
NO PRIMARY REF 99-422-8409: RNCC: 3 | RNVC: 2
GM29438-2: RNCC: 5 | RNVC: 2
4F3715: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-549-8727
Plunger Guide

995498727
SR1370/3: RNCC: 3 | RNVC: 2
SR1364/9: RNCC: 5 | RNVC: 2
243-97/13: RNCC: 6 | RNVC: 9
850391: RNCC: 6 | RNVC: 9
242-97/9: RNCC: 6 | RNVC: 9

17 Oct 1997

5340-99-595-0718
Sponge

995950718
040239-23: RNCC: 3 | RNVC: 2
50002/05 ITEM 3: RNCC: 5 | RNVC: 2
50002/05/3: RNCC: 5 | RNVC: 2

22 Dec 2005

5340-99-741-7102
Access Cover

997417102
3201-10371-20-1: RNCC: 3 | RNVC: 2

19 Mar 1990

5340-99-551-6349
Separa Flexible Bag

995516349
P-021168: RNCC: 3 | RNVC: 2
B-020256 ITEM 21: RNCC: 5 | RNVC: 2
B-020256/21: RNCC: 5 | RNVC: 2

3 Oct 2008

5340-99-795-5867
Screw Thread Insert

997955867
703-18-3-16537: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-382-5599
Turnbuckle Body

993825599
FIG.132P: RNCC: 3 | RNVC: 1
SST/Y/783/30/S001/000/114: RNCC: 5 | RNVC: 2
001294540/114: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-333-0149
Webbing Strap

993330149
SC0275: RNCC: 3 | RNVC: 2
SPCISR/04-WIP/1/2/151/5/3: RNCC: 6 | RNVC: 9

18 Feb 2010

5340-99-769-2750
Mounting Bracket

997692750
A-912062-001: RNCC: 3 | RNVC: 2
A912062-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-553-7737
Pad Assembly

995537737
NO PRIMARY REF 99-553-7737: RNCC: 3 | RNVC: 2
FD75035: RNCC: 5 | RNVC: 2
C57670T279905: RNCC: 6 | RNVC: 9

25 Jun 2002

5340-99-496-0447
Line Supporting Strap

994960447
VA-09-0058-003: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-99-434-6801
Loop Clamp

994346801
CE8641-11: RNCC: 3 | RNVC: 2
5K5872: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-154-3247
Mounting Bracket

991543247
904811-7860-000: RNCC: 3 | RNVC: 2
WSH1091549: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-99-665-3398
Multiple Angle Bracket

996653398
EA2-71-77: RNCC: 3 | RNVC: 2
26FZ-8829: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-229-7871
Manual Control Handle

992297871
NO PRIMARY REF 99-229-7871: RNCC: 3 | RNVC: 2
5XC-26111-L0: RNCC: 5 | RNVC: 2

13 Jul 2010

5340-99-687-2537
Lock-Release Lever

996872537
123/02716: RNCC: 3 | RNVC: 2

20 Jan 2009

5340-99-654-1536
Mounting Bracket

996541536
EA0705G010-061: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-668-8036
Manual Control Lever

996688036
3930/12: RNCC: 3 | RNVC: 2
3930/12: RNCC: 5 | RNVC: 2
90238 ITEM 12: RNCC: 5 | RNVC: 2
90238/12: RNCC: 5 | RNVC: 2

1 Apr 2010

5340-99-120-0576
Retaining Strap

991200576
A17-26854: RNCC: 3 | RNVC: 2
UK1SCS3332: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-637-9772
Classified

996379772
SD3-260081: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-467-1860
Worm Andshaft Assem

994671860
NO PRIMARY REF 99-467-1860: RNCC: 3 | RNVC: 2
A6588: RNCC: 5 | RNVC: 2
5CX5686: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-100-4239

5340-99-627-9439

5340-99-622-9894
Angle Bracket

5340-99-545-9949
Dust Protective Cap

5340-99-618-3516

5340-99-618-0561

5340-99-408-8284
Retaining Strap

994088284
551/675: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-99-352-3503
Carrying Handle

5340-99-223-3246
Screw Thread Insert

5340-99-758-2574
Retaining Strap

5340-99-752-3411

5340-99-760-7324
Dus Protective Plug

5340-99-764-4607
Angle Bracket

5340-99-760-7671

5340-99-715-9938

5340-99-711-7517

5340-99-711-9353
Rubber Bumper

5340-99-763-1294
Rubber Bumper

5340-99-748-9777
Electrical-Mec Post

5340-99-209-0363
Dynamo Supp Bracket

5340-99-412-5883

5340-99-536-6141

5340-99-453-9294
Dust Protective Cap

5340-99-436-4271

5340-99-545-6471
Handwheel

5340-99-535-6342
Angle Bracket

5340-99-603-7665

5340-99-468-3073

5340-99-468-3100
Spring Tension Clip

5340-99-468-0859
Turnbuckle

5340-99-468-0854

5340-99-550-4075
Grooved Cla Ferrule

5340-99-559-2000
Latch Door

5340-99-815-9108
Turnbuckle

5340-99-790-1215
Flexible Mount Set

5340-99-815-4749
Loop Clamp

5340-99-830-9204

5340-99-790-1437
Butt Hinge

5340-99-829-6696

5340-99-753-5407
Angle Bracket

5340-99-408-0890
Loop Clamp

994080890
187085: RNCC: 3 | RNVC: 2
C765-23: RNCC: 5 | RNVC: 2
S1180-23: RNCC: 5 | RNVC: 2
16E4059: RNCC: 6 | RNVC: 9
RTC0602: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-234-5181
Mounting Plate

992345181
KES 1005: RNCC: 3 | RNVC: 2
051CN-001: RNCC: 6 | RNVC: 9

11 May 2005

5340-99-101-3851
Access Cover

991013851
360-175: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-102-8560
Angle Bracket

991028560
5498: RNCC: 3 | RNVC: 2
37-616-169-01: RNCC: 5 | RNVC: 2

3 Sep 1981

5340-99-526-3726
Cushioning Pad

995263726
M50140: RNCC: 3 | RNVC: 2
502-020981: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-143-1239
Access Cover

991431239
KM713-12-135A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-269-1679
Mushroom Buffer

992691679
REF NO 23: RNCC: 3 | RNVC: 2
0231X-019: RNCC: 6 | RNVC: 9

7 Oct 2002

5340-99-562-6623
Access Cover

995626623
354-350-004: RNCC: 3 | RNVC: 2

11 Oct 2007

5340-99-839-0144
Bracket

998390144
NO PRIMARY REF 99-839-0144: RNCC: 3 | RNVC: 2
G1Z2342E00-02: RNCC: 5 | RNVC: 2

26 Jun 2006

5340-99-500-1942
Loop Clamp

995001942
FV 2193443/15: RNCC: 3 | RNVC: 2

13 Jan 1995

5340-99-615-5712
Rod End Clevis

996155712
KB539K0455-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-854-9529
Side Ring

998549529
NO PRIMARY REF 99-854-9529: RNCC: 3 | RNVC: 2
20042010: RNCC: 5 | RNVC: 2
81453340009: RNCC: 5 | RNVC: 2

8 Jul 2008

5340-99-651-9994
Electrical-Mec Post

996519994
3854-36487: RNCC: 3 | RNVC: 2
A3854-36487: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-535-8342
Mounting Plate

995358342
199/A1110/101: RNCC: 3 | RNVC: 2
FG9802P0011: RNCC: 6 | RNVC: 9

27 Feb 1998

5340-99-968-3237
Lift Ram

999683237
NO PRIMARY REF 99-968-3237: RNCC: 3 | RNVC: 2
B-1-32: RNCC: 5 | RNVC: 2
C57670T279540: RNCC: 6 | RNVC: 9

20 Jun 2002

5340-99-630-0523
Mounting Plate

996300523
SDA207130: RNCC: 3 | RNVC: 2
640-2-11056: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-589-2277
Attack C Rear Plate

995892277
AL109539: RNCC: 3 | RNVC: 2
0433B-005: RNCC: 6 | RNVC: 9

15 Sep 2004

5340-99-731-1664
Mounting Bracket

997311664
PT5562-4-700462: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-300-6218
General Purpose Resilient Mount

993006218
1302.001: RNCC: 3 | RNVC: 2

28 Jan 1993

5340-99-600-8450
Rod End Connector

996008450
W1DS342M: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-471-5741
Bracket

994715741
M5755276720000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-474-7822
Locking Stay

994747822
AUK 4135 A3 349: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-99-508-3061
Mounting Plate

995083061
5300-537: RNCC: 3 | RNVC: 2

3 Oct 2011

5340-99-442-3479
Angle Bracket

994423479
35906/602: RNCC: 3 | RNVC: 2
91737266: RNCC: 5 | RNVC: 2

18 Jun 1992

5340-99-306-3877
Access Cover

993063877
WG1382-9201-053: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-99-354-0109
Support

993540109
MTE0290-60: RNCC: 3 | RNVC: 2
982S40010: RNCC: 6 | RNVC: 9

17 Dec 1998

5340-99-562-7876
Access Cover

995627876
EA5333B465-055: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-450-6734
Retaining Strap

994506734
19437-275: RNCC: 3 | RNVC: 2
E19437-275: RNCC: 5 | RNVC: 2
19437-275: RNCC: 5 | RNVC: 9
6G1162: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-186-9271
Access Cover

991869271
MBEU149071: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-99-844-2363

5340-99-652-7618
Electrical-Mec Post

5340-99-945-2518

5340-99-943-7060

5340-99-944-0033

5340-99-716-2446
Cap Assembly

997162446
80-10-0059G: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-332-1223
Mounting Bracket

993321223
3A327-0265: RNCC: 3 | RNVC: 2

5 Apr 2006

5340-99-146-1225
Angle Bracket

991461225
S6120-60913-27: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-663-7654
Mounting Bracket

996637654
ER5333B023-043: RNCC: 3 | RNVC: 2

4 Aug 1997

5340-99-123-9808
Extension Drawer Slide

991239808
61/11739 C.O: RNCC: 3 | RNVC: 2
25P-GDOO-400 QOO: RNCC: 5 | RNVC: 2
PT5562-4-837133-002: RNCC: 5 | RNVC: 2
GRP QOO-002: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-574-4765
Mounting Bracket

995744765
HAB2-1013: RNCC: 3 | RNVC: 2

15 Sep 2010

5340-99-701-2786
Hinge Bracket

997012786
P-871008-001: RNCC: 3 | RNVC: 2
P871008-001: RNCC: 5 | RNVC: 2

5 Feb 1992

5340-99-823-3576
Cable Tie

998233576
513463: RNCC: 3 | RNVC: 2
1-513463: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-365-4532
Pressure Cap

993654532
HTE735-26-J: RNCC: 3 | RNVC: 2
ANIC-BE-8340022: RNCC: 6 | RNVC: 9

30 Oct 2003

5340-99-666-4348
Turret Blanking Pla

996664348
ML1-82-2876/1: RNCC: 3 | RNVC: 2
0521U-041: RNCC: 6 | RNVC: 9
05260-028: RNCC: 6 | RNVC: 9

20 Jun 2005

5340-99-372-8821
Access Cover

993728821
320409: RNCC: 3 | RNVC: 2
320409-4: RNCC: 5 | RNVC: 2
320409-A4: RNCC: 5 | RNVC: 2

11 Jul 1994

5340-99-134-9856
Insert

991349856
TX 2263: RNCC: 3 | RNVC: 2
EM1/5088/29: RNCC: 5 | RNVC: 2
982OT0050: RNCC: 6 | RNVC: 9

11 Jan 1999

5340-99-117-1793
Spring Tension Clip

991171793
A20327-303-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-075-5936
Mounting Plate

990755936
B 6364829: RNCC: 3 | RNVC: 2
D6364820 ITEM 1: RNCC: 5 | RNVC: 2
D6364820/1: RNCC: 5 | RNVC: 2

22 Jun 1994

5340-99-814-4405
Mechanical Stop

998144405
5237: RNCC: 3 | RNVC: 2
5613 ITEM 4: RNCC: 5 | RNVC: 2
5613/4: RNCC: 5 | RNVC: 2

15 Apr 2011

5340-99-728-5362
Spring Loaded Cylinder Fastener

997285362
140/00757: RNCC: 3 | RNVC: 2

4 Jan 2005

5340-99-894-8262
Pipe Hanger

998948262
2360: RNCC: 3 | RNVC: 2
15015/12A: RNCC: 5 | RNVC: 2
825-620: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-916-7532
Mounting Bracket

999167532
32/916602: RNCC: 3 | RNVC: 2
93-916-7532: RNCC: 6 | RNVC: 9

5 Apr 2011

5340-99-696-3390
Mounting Plate

996963390
1945/5745: RNCC: 3 | RNVC: 2
D833/023: RNCC: 6 | RNVC: 9

13 Jan 1999

5340-99-781-0798
Bumper

997810798
SJ5008-BLACK: RNCC: 3 | RNVC: 2
223-635: RNCC: 5 | RNVC: 2
SJ5008: RNCC: 5 | RNVC: 2
990173EQ: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-103-4598
Fork End

991034598
H13-88-547: RNCC: 3 | RNVC: 2
SRH13-88-547: RNCC: 5 | RNVC: 2
26SW95322: RNCC: 6 | RNVC: 9
26SW95322: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-793-5222
Plastics Bumper

997935222
MBEU-90448: RNCC: 3 | RNVC: 2
B/MBEU-90448: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-341-4058
Blank End Cap

993414058
SSN.12/W/572/20/2 FITTING HHP 2-: RNCC: 3 | RNVC: 1
001255245 FITTING HHP 2222: RNCC: 5 | RNVC: 2
001255245/HHP 2222: RNCC: 5 | RNVC: 2
SSN.12/W/572/20/2/HHP 2222: RNCC: 5 | RNVC: 2

9 Oct 1996

5340-99-562-5381
Threaded Rod End

995625381
6-4CF10597A: RNCC: 3 | RNVC: 2
26DL/10532: RNCC: 6 | RNVC: 9

25 Apr 2002

5340-99-721-4894
Spring Tension Clip

997214894
CONVOLEX AR3/4": RNCC: 3 | RNVC: 2
FV1062495: RNCC: 5 | RNVC: 2
CONVOLEX AR3/4: RNCC: 5 | RNVC: 2
11A4/114095/6: RNCC: 5 | RNVC: 2
AR3/4: RNCC: 6 | RNVC: 9
CONVOLEX: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-721-2770
Snubber Bracket

997212770
SSN.07/W/523/60/M8/32: RNCC: 3 | RNVC: 2
W/523/60/M8/32: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-452-0683
Angle

994520683
465-151 160.001: RNCC: 3 | RNVC: 2
9 895 035: RNCC: 5 | RNVC: 2

27 Jan 1995

5340-99-549-5868
Rod End Clevis

995495868
EB5332B094-041: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-99-127-6101
Screw Thread Insert

991276101
AS8452/74: RNCC: 2 | RNVC: 2
AS8452-74: RNCC: 5 | RNVC: 2
AS8452-74: RNCC: 5 | RNVC: 2
AS8452-74: RNCC: 5 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-468-0848
Turnbuckle

994680848
AGS491-BCE: RNCC: 2 | RNVC: 2
AGS491BCE: RNCC: 5 | RNVC: 2
28U3014: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-147-2229
Rear Mounting Block

991472229
1168/07A: RNCC: 3 | RNVC: 2
FH952890005: RNCC: 6 | RNVC: 9

27 Jul 1995

5340-99-629-0927
Block Fairlead Section

996290927
WG1373-0106-101: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results