What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 25 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 368

5340-99-440-2421

5340-99-537-6369

5340-99-626-2002

5340-99-638-2349
Retaining Band

5340-99-621-4465

5340-99-809-0853

5340-99-533-6709

5340-99-540-7353
Dus Protective Plug

5340-99-641-8041
Continuous Hinge

5340-99-611-4279
Angle Bracket

5340-99-124-8673
Turnbuckle Body

991248673
AN31404: RNCC: 3 | RNVC: 2
5053253: RNCC: 5 | RNVC: 2
M2AN31404: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-710-8850
Nut And Bolt Locking Plate

997108850
V34198: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-452-6702
Filler Opening Cap

994526702
FC441: RNCC: 3 | RNVC: 2
FCMX441: RNCC: 5 | RNVC: 2
27F2721: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-635-1000
Mounting Bracket

996351000
CU45639A: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-99-221-8269
Nonmetallic Bushing

992218269
SUE6287: RNCC: 3 | RNVC: 2
SUE6287: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-225-9480
Clip Retainer Plate

992259480
ER9020: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-99-151-6517
Mounting Plate

991516517
259-3007: RNCC: 3 | RNVC: 2
50027978: RNCC: 5 | RNVC: 2

21 May 2010

5340-99-370-8107
Webbing Strap

993708107
FV 2110702: RNCC: 3 | RNVC: 2
FV 2110702: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-99-500-0155
Mounting Plate

995000155
FV 2213533: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-99-643-8708
Bow Handle

996438708
B53162: RNCC: 1 | RNVC: 2
HBF1400: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-051-7640
Filler Opening Cap

990517640
C11083/2: RNCC: 3 | RNVC: 2
99301837: RNCC: 5 | RNVC: 2

18 Mar 1994

5340-99-242-9421
Access Cover

992429421
ASE02548: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-99-428-9845
Dust And Moisture Seal Protective Cap

994289845
B73567: RNCC: 3 | RNVC: 2
6F406: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-300-8529
Webbing Strap

993008529
PCL006425: RNCC: 3 | RNVC: 2
A20242: RNCC: 5 | RNVC: 2

19 Oct 1993

5340-99-713-1519
Dust And Moisture Seal Protective Plug

997131519
RU41289: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-962-0487

5340-99-900-0255

5340-99-895-1863

5340-99-731-1489
Pipe Clip

5340-99-900-0249

5340-99-848-0224

5340-99-948-6363

5340-99-700-0674
Screw Thread Insert

997000674
UBS26J7: RNCC: 3 | RNVC: 2
UBS26: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-133-8635
Loop Clamp

991338635
UG0543332: RNCC: 3 | RNVC: 2
UG0543332: RNCC: 5 | RNVC: 9

19 Mar 2007

5340-99-352-5572
Mounting Plate

993525572
CK0517344: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-99-737-5155
Loop Clamp

997375155
FV 2015675 2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-498-9422
General Purpose Resilient Mount

994989422
48040633: RNCC: 3 | RNVC: 2
2500599972: RNCC: 5 | RNVC: 2

14 Jun 2011

5340-99-234-2832
Rod End Clevis

992342832
110084-1557: RNCC: 3 | RNVC: 2
26VC-3403: RNCC: 6 | RNVC: 9

12 Feb 2002

5340-99-750-3240
Runner

5340-99-120-6703
Snap Hook

991206703
SDA168381: RNCC: 2 | RNVC: 2
SDA168381: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-151-9641
Surface Bolt

991519641
POG117625: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-99-768-5499
Spring Tension Clip

5340-99-733-0044

5340-99-764-0895
Pin Assembly

5340-99-732-1051
Rubber Bumper

5340-99-914-4768

5340-99-788-6232
Angle Bracket

5340-99-777-1104
Handwheel

5340-99-762-6176
Rubber Bumper

5340-99-810-9243
Mounting Plate

5340-99-734-5753

5340-99-788-9417
Line Supporti Strap

5340-99-769-0009

5340-99-754-6654

5340-99-730-3945

5340-99-732-8836
Handwheel

5340-99-758-7804
Bow Handle

5340-99-448-1101
Section Block Clamp

994481101
25EK265: RNCC: 3 | RNVC: 2
26TD4419: RNCC: 6 | RNVC: 9

18 Apr 2002

5340-99-108-8464
Angle Bracket

991088464
EU61646: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-427-0611
Access Cover

994270611
BA49852: RNCC: 3 | RNVC: 2
36VV4255: RNCC: 6 | RNVC: 9
36VV4255: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-600-5907
Retaining Strap

996005907
21EF389: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-106-1555
Nut And Bolt Locking Plate

991061555
P81376: RNCC: 3 | RNVC: 2
P81376: RNCC: 5 | RNVC: 2
25L15282: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-354-0782
Mounting Bracket

993540782
FV2307179: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-99-419-4260
Pipe Hanger

994194260
H10193634: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-99-626-0332
Catch Strike

996260332
B30706: RNCC: 1 | RNVC: 2
02-504: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-471-4387
Mounting Bracket

994714387
100402-5330-ASY: RNCC: 3 | RNVC: 2
100402-5330-ASY: RNCC: 5 | RNVC: 2
M524559: RNCC: 5 | RNVC: 2

3 Jun 2008

5340-99-223-5057

5340-99-254-1051
Retaining Strap

5340-99-119-5984
Webbing Strap

991195984
070587: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-133-8558
Loop Clamp

991338558
FV 2264158: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-99-250-8994
Packing Plate

992508994
FV840982: RNCC: 3 | RNVC: 2
FV840982: RNCC: 5 | RNVC: 2

29 Oct 1988

5340-99-115-3335
Rim Clenching Clamp

991153335
AM4412: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-119-2214
Bracket And Clamp A

991192214
190009: RNCC: 3 | RNVC: 2

19 Mar 1999

5340-99-326-6068
Lid Control Box

993266068
MBEU149180: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-99-600-1484
Retaining Ring

996001484
A28Y: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-660-7233
Retaining Strap

996607233
FV 2102969: RNCC: 3 | RNVC: 2

18 Oct 1993

5340-99-143-0361
Escutcheon Plate

991430361
110142-13629: RNCC: 3 | RNVC: 2
110142-13629: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-216-0437
Corner Brace

992160437
40000938: RNCC: 3 | RNVC: 2

11 Feb 2011

5340-99-435-6840
Bracket

994356840
M5725456320000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-147-7399
Access Cover

991477399
36248-DGL: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-99-120-2415
Rim Lock Key

991202415
FK4: RNCC: 3 | RNVC: 1
B5156: RNCC: 5 | RNVC: 1
FK4AKD: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-120-1189
Retaining Strap

991201189
LP184820: RNCC: 3 | RNVC: 2
LP184820: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-595-0801
Pad Eye

995950801
FV2284205: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-99-544-8693
Nut And Bolt Retainer

995448693
30F12510: RNCC: 3 | RNVC: 2
F12510: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-424-1994
Access Cover

994241994
B183348: RNCC: 3 | RNVC: 2
B183348: RNCC: 5 | RNVC: 9
26FX621: RNCC: 6 | RNVC: 9
26FX621: RNCC: 6 | RNVC: 9

15 Oct 1979

5340-99-594-5717
Rod End Clevis

995945717
JS 1403: RNCC: 3 | RNVC: 1
AS 31017: RNCC: 5 | RNVC: 2
9800G0180: RNCC: 6 | RNVC: 9

16 Mar 1998

5340-99-427-2618
Retaining Strap

994272618
BR10087: RNCC: 3 | RNVC: 2
BR10087: RNCC: 5 | RNVC: 9
36VV15769: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-037-0245
Rod End And Clevis

990370245
887 1938: RNCC: 3 | RNVC: 2
S43: RNCC: 5 | RNVC: 2

28 Sep 1993

5340-99-639-2655
Bow Handle

996392655
B45975: RNCC: 1 | RNVC: 2
HAM700M: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-225-8700
Rh Patch Panel Brkt

992258700
K510511: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-597-0316
Angle Bracket

995970316
333/L4504: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-99-213-7326
General Purpose Resilient Mount

992137326
48040356: RNCC: 3 | RNVC: 2
2500599952: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-99-652-9956

5340-99-251-5995

5340-99-223-7458

5340-99-392-9593
Protection Cap

5340-99-202-8339

5340-99-700-5027
Dust And Moisture Seal Protective Plug

997005027
MBEU160607: RNCC: 3 | RNVC: 2
MBEU160607: RNCC: 5 | RNVC: 2

27 Feb 2001

5340-99-327-9150
Mounting Bracket

993279150
AMP 01 01 46007: RNCC: 3 | RNVC: 2
60200992: RNCC: 5 | RNVC: 2

4 Feb 2005

5340-99-601-6793
Retaining Strap

996016793
AE7SS4234: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-667-3897
Angle Bracket

996673897
AML59170: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-99-679-8269
Dust And Moisture Seal Protective Cap

996798269
T31174: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-151-3690
Access Cover

991513690
7181834021: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-99-461-1200
Loop Clamp

994611200
B31132: RNCC: 3 | RNVC: 2
27K589: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-727-4203
Mounting Bracket

997274203
1705P-A SP: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-99-553-1760
Loop Clamp

995531760
FV 2193499: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-99-660-1868
Webbing Strap

996601868
FV 2149991: RNCC: 3 | RNVC: 2
FV 2149991: RNCC: 5 | RNVC: 2

28 Nov 1991

5340-99-562-8003
Dust And Moisture Seal Protective Cap

995628003
POG111072: RNCC: 3 | RNVC: 2

1 Jul 2010

5340-99-666-5441
Mounting Plate

996665441
MBEU171589: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-99-149-9583
Mounting Bracket

991499583
P8001097071: RNCC: 3 | RNVC: 2

18 May 2009

5340-99-116-2585

5340-99-115-7028

5340-99-256-7300
Angle Bracket

992567300
AS40194: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-99-377-5013
Dust And Moisture Seal Protective Cap-Plug

993775013
Q18071: RNCC: 3 | RNVC: 2

23 Apr 1999

5340-99-322-3176
Multiple Angle Bracket

993223176
09770: RNCC: 3 | RNVC: 2
232505: RNCC: 5 | RNVC: 2
002625794: RNCC: 5 | RNVC: 2
DRG09770: RNCC: 5 | RNVC: 2

12 Nov 1993

5340-99-495-3933
Clamp Plate

994953933
SD47943: RNCC: 3 | RNVC: 2
SD47943: RNCC: 3 | RNVC: 9

21 Oct 2010

5340-99-299-9697
Shim

992999697
6633174: RNCC: 3 | RNVC: 2
CV123514: RNCC: 5 | RNVC: 2

26 Jan 2009

5340-99-016-8613
Plate Assembly

990168613
MXH1887: RNCC: 3 | RNVC: 2
KDH1903: RNCC: 6 | RNVC: 9

16 Dec 1994

5340-99-198-4012
Bumper

991984012
110035-4663: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-99-302-8092
Manual Control Lever

993028092
FV 2267912: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-99-105-2656
Clamp Hinge

991052656
20970B: RNCC: 3 | RNVC: 2
Z4ZD03398: RNCC: 6 | RNVC: 9

10 Jul 1990

5340-99-548-5954
Nut And Bolt Locking Plate

995485954
102636604: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-465-8546
Button

994658546
29G1884: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-453-4432
Holder

994534432
SL 100: RNCC: 3 | RNVC: 2
SL 100: RNCC: 5 | RNVC: 2
3AP5177: RNCC: 6 | RNVC: 9

20 Apr 1994

5340-99-460-0690
Hinge Kit

994600690
360040990: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-99-256-4264
Mounting Bracket

992564264
3302580 R1: RNCC: 3 | RNVC: 2
3302580R2: RNCC: 5 | RNVC: 2

6 May 1993

5340-99-402-7127
Spring Catch.

994027127
2YMA10798: RNCC: 3 | RNVC: 2
022TZ-050: RNCC: 6 | RNVC: 9

7 Oct 2002

5340-99-630-1841
Clamping Catch

996301841
L3771: RNCC: 3 | RNVC: 1
NTS13725: RNCC: 5 | RNVC: 2
MVEE35591A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-715-2735
Loop Clamp

997152735
MBEU10179: RNCC: 3 | RNVC: 2
AMBEU10179: RNCC: 5 | RNVC: 2
10179: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-657-4174
Rod End Connector

996574174
49368: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-5851
Track Rod

991475851
80 000 017: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-99-509-7382
Dust And Moisture Seal Protective Cap-Plug

995097382
T2526: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-99-628-8744
Rim Clenching Clamp

996288744
17722-23: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-667-7379
Webbing Strap

996677379
IGQMS1558 A603: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-99-786-6699
General Purpose Resilient Mount

997866699
13/2107/1: RNCC: 3 | RNVC: 2
KDK1895: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-659-0487
Mounting Plate

996590487
FV 2111012: RNCC: 3 | RNVC: 2
FV 2111012: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-104-7079
General Purpose Resilient Mount

991047079
RU.29406: RNCC: 3 | RNVC: 2
RU29406: RNCC: 5 | RNVC: 2
RU37107: RNCC: 5 | RNVC: 2
36TN2706: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-227-2595
Net Hook

992272595
FV 2268218: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-99-205-1366
Loop Clamp

992051366
347258: RNCC: 3 | RNVC: 2
325028: RNCC: 5 | RNVC: 2
ACA366: RNCC: 5 | RNVC: 2
989000572: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-411-1145
Dust And Moisture Seal Protective Cap-Plug

994111145
35NM62590: RNCC: 3 | RNVC: 2
NM62590: RNCC: 5 | RNVC: 2

15 Dec 2000

5340-99-746-5145
Swivel Castor

997465145
6-55-NYB/SWB: RNCC: 3 | RNVC: 2

15 Sep 1987

5340-99-344-3612
Mounting Bracket

993443612
13D22411: RNCC: 3 | RNVC: 2
S-20465: RNCC: 5 | RNVC: 1
S-20465 RIGHT: RNCC: 6 | RNVC: 9

16 Jul 2003

5340-99-593-2615
Manual Control Handle

995932615
347-42: RNCC: 3 | RNVC: 2

2 Feb 1995

5340-99-655-5432
Rod End Clevis

996555432
200749740: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-610-9904
Block Fairlead Section

996109904
137200D45: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-536-6386

5340-99-541-3419
Corrosion Preventive Anode

995413419
0173029: RNCC: 3 | RNVC: 2
0173029: RNCC: 5 | RNVC: 2
173029: RNCC: 5 | RNVC: 2

27 Jan 1981

5340-99-568-5512
Catch Strike

995685512
110142SHT5594: RNCC: 3 | RNVC: 2

13 Jan 1992

5340-99-205-3563
Headless Straight Rod

992053563
2503703: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-282-7083
Turnbuckle

992827083
HTE22802: RNCC: 3 | RNVC: 2

14 Aug 1992

5340-99-254-3695
Quick Release Pin

992543695
BLS6LA09S: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-404-8075
Spacing Threaded Standoff

994048075
FV 2068666: RNCC: 3 | RNVC: 2
FV 2068666: RNCC: 5 | RNVC: 2

7 Aug 1992

5340-99-476-5826
Blowe Mounting Base

994765826
1028-5067: RNCC: 3 | RNVC: 2
RECORD 314: RNCC: 6 | RNVC: 9

10 Jan 2005

5340-99-843-7129
Mounting Bracket

998437129
7161730401/RAL6031: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-99-875-6575
Dust And Moisture Seal Protective Cap

998756575
90FSC089: RNCC: 3 | RNVC: 2
32/903400: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-361-3125
General Purpose Resilient Mount

993613125
332/F7840: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-99-316-3775
Mounting Bracket

993163775
1KSM99AKX: RNCC: 3 | RNVC: 2
1KSM99AKX: RNCC: 5 | RNVC: 2
FF962GE0019: RNCC: 6 | RNVC: 9

2 Aug 1996

5340-99-719-1432
Mending Plate

997191432
V102968: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-186-8948
Mounting Bracket

991868948
FV 2200816: RNCC: 3 | RNVC: 2
FV 2200816: RNCC: 5 | RNVC: 2

18 May 2001

5340-99-585-8933
Key Set

995858933
B091538: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-99-412-6077
Mounting Plate

994126077
AIR139560: RNCC: 3 | RNVC: 2

2 May 2001

5340-99-250-1208
Rod End Connector

992501208
110033SHT361: RNCC: 3 | RNVC: 2
110033 SHT. 361: RNCC: 5 | RNVC: 2
26VC-5367: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-577-2109
Angle Bracket

995772109
FV2250002: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-99-538-8171
Threaded Rod End

995388171
MFL 12GK: RNCC: 3 | RNVC: 2
C3000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-252-6087
Flange Assembly

992526087
AL106653: RNCC: 3 | RNVC: 2

23 Aug 2005

5340-99-225-9315
Access Cover

992259315
D8877437: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-99-264-5360
Access Cover

992645360
AQ16284: RNCC: 3 | RNVC: 2
AQ16284: RNCC: 5 | RNVC: 2
Q16284: RNCC: 5 | RNVC: 2

4 May 1999

5340-99-317-6536
Lockplate

993176536
M2715001620000: RNCC: 3 | RNVC: 2

31 May 2011

5340-99-638-1628
Angle Bracket

996381628
090064: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-449-5484
Loop Clamp

994495484
B183041: RNCC: 3 | RNVC: 2
36AK216: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-250-2198
General Purpose Access Door

992502198
FV2293788: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-99-250-8995
Pedal Stop

992508995
FV839316: RNCC: 3 | RNVC: 2

25 Nov 1988

5340-99-767-6138
Spacing Threaded Standoff

997676138
MDS4901-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-383-4227
Mounting Bracket

993834227
FV 2191003: RNCC: 3 | RNVC: 2

14 Feb 1994

5340-99-454-9670
Mounting Plate

994549670
CM46889: RNCC: 3 | RNVC: 2

13 Feb 2007

5340-99-241-6023
Block Fairlead

992416023
110033-1585: RNCC: 3 | RNVC: 2
26VC-5182: RNCC: 6 | RNVC: 9

19 Feb 2002

5340-99-402-3109
Access Cover

994023109
14537165: RNCC: 3 | RNVC: 2
CV186359: RNCC: 5 | RNVC: 2
VOE14537165: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-666-2528
Mounting Bracket

996662528
110028SH1601: RNCC: 3 | RNVC: 2
110028SHT1601: RNCC: 5 | RNVC: 2
26VC-8895: RNCC: 6 | RNVC: 9

8 Sep 2004

5340-99-639-2667
Retaining Strap

996392667
098344: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-514-5263
Webbing Strap

995145263
GQD43329: RNCC: 3 | RNVC: 2
0136J-049: RNCC: 6 | RNVC: 9

30 Nov 2001

5340-99-136-8548
Hinged Hasp

991368548
615EB2 3-4: RNCC: 3 | RNVC: 2
25X10001: RNCC: 6 | RNVC: 9

1 Apr 1980

5340-99-754-4321
Spring Tension Clip

997544321
NTSC10128: RNCC: 3 | RNVC: 2
NTSC10128: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-748-4493
Electrical-Mec Post

997484493
BT04404: RNCC: 3 | RNVC: 2
BT04404: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-753-6418
Angle Bracket

997536418
D21746: RNCC: 3 | RNVC: 2
106140201621: RNCC: 5 | RNVC: 2
1440659: RNCC: 5 | RNVC: 2
1440659: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-735-5767
Handle Grip

997355767
DEMCO 96: RNCC: 3 | RNVC: 2
40020103: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-735-4593
Control Rod

997354593
HJ112: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-745-9032
Mounting Bracket

997459032
17689910: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-152-0826
Bracket Assy

991520826
M5755179800100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-547-7904
Mounting Plate

995477904
FV 870235: RNCC: 3 | RNVC: 2
VP 8946: RNCC: 5 | RNVC: 2

5 May 1993

5340-99-104-3683
Loop Clamp

991043683
N4789: RNCC: 3 | RNVC: 2
36DE3653: RNCC: 6 | RNVC: 9
36TT1435: RNCC: 6 | RNVC: 9

7 Mar 1990

5340-99-865-6962
Synchro Clamp

998656962
FV 395828: RNCC: 3 | RNVC: 2
LV9ACRFV395828: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-734-5518
Retaining Strap

997345518
LN34481: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-304-2043
Access Cover

993042043
201567845: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-99-488-8302
Mounting Bracket

994888302
AML59057: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-99-343-1672
Loop Clamp

993431672
35293067: RNCC: 3 | RNVC: 2
CV164967: RNCC: 5 | RNVC: 2

28 Apr 2009

5340-99-629-0537
Flanged Minilock Wi

996290537
HTE8151: RNCC: 3 | RNVC: 2
HTE8151: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-192-2126
Catch Strike

991922126
01TL13405: RNCC: 3 | RNVC: 2
01TL13405: RNCC: 6 | RNVC: 9

14 Dec 1990

5340-99-604-7798
Retaining Strap

996047798
F306517: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-553-3670
Antipilferage Seal

995533670
S6161TTT: RNCC: 3 | RNVC: 2
S6161TTT: RNCC: 5 | RNVC: 2

31 May 2011

5340-99-700-2311
Comp Helical Spring

997002311
MBEU3084: RNCC: 3 | RNVC: 2
27L1878: RNCC: 6 | RNVC: 9

27 Oct 1975

5340-99-626-4722
Angle Bracket

996264722
3AC10416: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-740-7332
Latch Bar

997407332
FV 2031786: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-415-0879
Bail Handle

994150879
MMHH-XR2002-2: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-99-723-7532
Crank

997237532
FV2048029: RNCC: 3 | RNVC: 2
FV2048029: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-740-9543
Retaining Strap

997409543
MBEU 90130: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-5212
Catch Strike

997335212
3290620R1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-8944
Escutcheon Plate

997338944
FVJ000011PUY: RNCC: 3 | RNVC: 2

20 Jan 2010

5340-99-739-2608
General Purpose Resilient Mount

997392608
8904939: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-738-6576
Extension Handle

997386576
95162G: RNCC: 3 | RNVC: 2

1 May 2007

5340-99-403-8597
Access Cover

994038597
1G3656: RNCC: 3 | RNVC: 2
61BM20107: RNCC: 6 | RNVC: 9

25 Mar 1981

5340-99-601-3288
Retaining Strap

996013288
6M4V12519AND: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-603-7431
Loop Clamp

996037431
F282883: RNCC: 3 | RNVC: 2
F282883: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-285-3579
Angle Bracket

992853579
FV 2225637: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-99-720-7865
Nut And Bolt Locking Plate

997207865
MR200(A4)6743: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-143-1835
Mounting Bracket

991431835
110055-253: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-626-5084
Loop Clamp

996265084
BKB906: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-449-6518
Spacing Threaded Standoff

994496518
RK29977: RNCC: 3 | RNVC: 2
36DT1804: RNCC: 6 | RNVC: 9

11 Jun 1979

5340-99-613-5558
Access Cover

996135558
63765: RNCC: 3 | RNVC: 2

10 Dec 2010

5340-99-134-8549
Plate

991348549
WSH1010167: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-99-255-3865
Spring Tension Clip

992553865
9232050350: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-603-5150
Section Block Clamp

996035150
F.275769: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-421-0166
Protection Bellows

994210166
710.1.24.562.1: RNCC: 3 | RNVC: 2
710.1.24.562.1: RNCC: 5 | RNVC: 2

1 Jul 1994

5340-99-213-3132
Threaded Rod End

992133132
6-4CF4209: RNCC: 3 | RNVC: 2

9 Jun 2009

5340-99-200-1122
Loop Clamp

992001122
AGS2104-4: RNCC: 2 | RNVC: 2
AGS2104-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-423-9271
Access Cover

994239271
116761TEM65: RNCC: 3 | RNVC: 2
569154: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-759-5824
Roller

997595824
MBEU58021: RNCC: 3 | RNVC: 2
BMBEU58021: RNCC: 5 | RNVC: 2
J31371-1: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-151-5136
Timing Ring

991515136
HAM 3: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-99-649-5141
Sealing Plug Assembly

996495141
CH127762-6: RNCC: 1 | RNVC: 2
PLGA3431010: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-330-2238
Clamp

993302238
2 0037-838: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-99-442-0945
Plain Solid Disc

994420945
GM5999-1: RNCC: 3 | RNVC: 2
4G6568: RNCC: 6 | RNVC: 9
4G4420945: RNCC: 6 | RNVC: 9
4G5046: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-461-0103

5340-99-208-8149
Resilient Mount Plate

992088149
1-4580: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-204-8057
Expansion Plug

992048057
S111-2: RNCC: 3 | RNVC: 2
S111-2: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-517-5954
Spring Tension Clip

995175954
BP06010: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-99-666-8962
Mounting Bracket

996668962
FV2265661: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-99-538-1218
Dust And Moisture Seal Protective Plug

995381218
SL742-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-795-1483
Rod End Clevis

997951483
5161A: RNCC: 3 | RNVC: 2
5161A: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-126-4697
Water Cooler Plate

991264697
P25: RNCC: 3 | RNVC: 2
SR0045/2: RNCC: 5 | RNVC: 2
0229-90/2: RNCC: 6 | RNVC: 9

8 May 1997

5340-99-110-3626
Bow Handle

991103626
10001-4-28-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-428-3066
Dust And Moisture Seal Protective Cap

994283066
VE 104660A: RNCC: 3 | RNVC: 2
URL 0330: RNCC: 5 | RNVC: 2
VE 104660 A: RNCC: 5 | RNVC: 2
0562-202203: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-815-7032
Rod End Clevis

998157032
F.V.50429: RNCC: 3 | RNVC: 2
LV9ASCFV50429: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-205-6947
Rod End Clevis

992056947
NTS12920: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-152-7610
Retaining Strap

991527610
WP34G: RNCC: 3 | RNVC: 2
79431009: RNCC: 5 | RNVC: 2
2500601961: RNCC: 5 | RNVC: 2

24 Nov 2011

5340-99-417-4531
Retaining Strap

994174531
2-0073-201: RNCC: 3 | RNVC: 2
27Q22430: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-5434
Angle Bracket

996475434
SUE21627-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-666-5133
End Tube Assembly

996665133
AL107249: RNCC: 3 | RNVC: 2

23 Aug 2005

5340-99-151-8353
Detent Plunger

991518353
AMP 10 00 69000: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-99-894-8139
Access Cover

998948139
TZ 3445122: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-821-8341
Fork Head And Sprin

998218341
07001000: RNCC: 3 | RNVC: 2
55381007: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-810-4062
Mounting Bracket

998104062
FV 2115866: RNCC: 3 | RNVC: 2
FV 2115866: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-99-866-7036
Access Cover

998667036
FV149643: RNCC: 3 | RNVC: 2
CK539: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-866-4536
Access Cover

998664536
FV 385559: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-742-7417
Mounting Plate

997427417
FV2300495: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-99-732-0810
Clip

997320810
G201 124158: RNCC: 3 | RNVC: 2
400092: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9

6 Feb 1997

5340-99-827-3053
Access Cover

998273053
6010-8D: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-99-824-2944
Loop Clamp

998242944
FV731555: RNCC: 3 | RNVC: 2
FV731555: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-828-0764
Loop Clamp

998280764
FV 737267: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-4981
Clamp

998284981
FV813283: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-6743
Butt Hinge Leaf

998246743
398493: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-6367
Loop Clamp

998276367
FV 738145: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-3203
Access Cover

998293203
C5NE6438A: RNCC: 3 | RNVC: 2
1804217: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-830-0794
Slott Angle Bracket

998300794
FV932218: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-8588
Loop Clamp

998288588
FV125259: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-3044
Line Supporting Strap

998303044
E863024S: RNCC: 3 | RNVC: 2
1509658: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-824-0966
Exhaus Support Clip

998240966
2701545: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9265
Clip

998269265
FV383896: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-0758
Loop Clamp

998280758
FV737261: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-99-731-3065
Mounting Plate

997313065
FV2249749: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-99-725-9544
Mounting Bracket

997259544
34351: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-99-810-3688
Double Angle Bracket

998103688
FV619279: RNCC: 3 | RNVC: 2
100345T: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-7824
Band Clamp

998297824
3000LT0250S30: RNCC: 3 | RNVC: 2
0630BC577: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-895-1795
Dust And Moisture Seal Protective Cap

998951795
219689: RNCC: 3 | RNVC: 2
61RV40251: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-787-5349
Clamp

997875349
202-205: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-872-8237
Clamp

998728237
HL001514: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-99-895-5247
Retaining Band

998955247
230815: RNCC: 3 | RNVC: 9
61LE40731: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-725-1520
Retaining Strap

997251520
POG055485: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-99-741-1799
Angle Bracket

997411799
271451003279: RNCC: 3 | RNVC: 2

8 Sep 1986

5340-99-734-5505
Dust And Moisture Seal Protective Cover

997345505
HLN2039: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-738-7676
Door Handle

997387676
428.100.342: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-99-733-8104
Dust And Moisture Seal Boot

997338104
84760933: RNCC: 3 | RNVC: 2
A0084760933: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-723-7566
Electrical-Mec Post

997237566
FV2048505: RNCC: 3 | RNVC: 2
FV2048505: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-99-740-6985
Angle Bracket

997406985
M36150212201: RNCC: 3 | RNVC: 2
M3615021220100: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-99-733-5252
Mounting Plate

997335252
FV611325: RNCC: 3 | RNVC: 2
FV611325: RNCC: 5 | RNVC: 2

7 Aug 2007

5340-99-743-0728
Angle Bracket

997430728
J26347: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-0146
General Purpose Resilient Mount

998270146
11148506: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-834-6580
Dust And Moisture Seal Protective Cap-Plug

998346580
MBEU82595: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-99-807-6154
Electrical-Mec Post

998076154
182827: RNCC: 3 | RNVC: 2

21 Jul 1995

5340-99-829-8280
Access Cover

998298280
FV926815: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-3825
Loop Clamp

998263825
FV577262: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-5501
Turnbuckle

998265501
FV897601: RNCC: 3 | RNVC: 2

1 Nov 1983

5340-99-831-1784
Handwheel

998311784
PGT680452: RNCC: 3 | RNVC: 2
PG680452: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-4306
Manual Control Lever

998294306
FV814181: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-3286
Angle Bracket

998243286
FV738601: RNCC: 3 | RNVC: 2
FV738601: RNCC: 5 | RNVC: 2

25 Aug 1978

5340-99-824-0107
Loop Clamp

998240107
FV473539: RNCC: 3 | RNVC: 2
FV473539: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-793-1879
Loop Clamp

997931879
EN2902F20: RNCC: 2 | RNVC: 2

7 Feb 2000

5340-99-726-0473
Mounting Bracket

997260473
FV2284370: RNCC: 3 | RNVC: 2

18 Jun 2010

5340-99-738-7428
Spring Tension Clip

997387428
MWC6203: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-99-743-1077
Casement Fastener

997431077
G020902: RNCC: 3 | RNVC: 2
FL990II0126: RNCC: 6 | RNVC: 9

24 Mar 1999

5340-99-759-3295
Retaining Strap

997593295
36675143: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-733-7913
Dust And Moisture Seal Protective Cap

997337913
S3S14401000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-742-4154
Mounting Plate

997424154
53954: RNCC: 3 | RNVC: 2

4 Apr 2008

5340-99-424-6552

5340-99-207-3426

5340-99-206-0671
Access Cover Plate

5340-99-445-7982

5340-99-818-6008

5340-99-828-3208

5340-99-206-0203
Resilient Mount

5340-99-133-8368
V Clip

991338368
114646: RNCC: 3 | RNVC: 2
030421R1BC04073: RNCC: 6 | RNVC: 9
030421R1BC04092: RNCC: 6 | RNVC: 9

25 Jan 2007

5340-99-909-6571
Mounting Plate

999096571
25181909: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-99-754-0076
Rod End Clevis

997540076
B9200: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-99-152-2184
Lock

991522184
14385769: RNCC: 3 | RNVC: 2
CV183040: RNCC: 5 | RNVC: 2
VOE14385769: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-99-192-5415
Access Cover

991925415
A2 504771: RNCC: 3 | RNVC: 2
504771: RNCC: 5 | RNVC: 2

22 Jul 1994

5340-99-192-2967
Section Block Clamp

991922967
FV 2149475: RNCC: 3 | RNVC: 2
FV 2149475: RNCC: 5 | RNVC: 2

29 Aug 1991

5340-99-754-9555
Dust And Moisture Seal Protective Cap

997549555
SP27010: RNCC: 3 | RNVC: 2
SP27010: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-192-6458
Butt Hinge

991926458
032400: RNCC: 3 | RNVC: 2
032400: RNCC: 3 | RNVC: 9
B032400: RNCC: 5 | RNVC: 2
B032400: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-760-9977
Key Holder

997609977
25.17.1093: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-99-752-9802
Hinge Bracket

997529802
CK0340928: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-754-6736
Webbing Strap

997546736
NJR484: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-873-2143
Mounting Bracket

998732143
NRC9474: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-99-192-5494
Hook Handle

991925494
110642SHT10101: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-99-752-9801
Mounting Bracket

997529801
CK0340924: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-735-5735
Support Hook

997355735
HDH1309: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-753-5164
Access Cover

997535164
FV474981: RNCC: 3 | RNVC: 2

10 Oct 1982

5340-99-940-0650
Retaining Strap

5340-99-952-2633

5340-99-839-0557

5340-99-825-3137

5340-99-799-8016
Screw Thread Insert

5340-99-687-2451
Butt Hinge Leaf

996872451
2 0061-998: RNCC: 3 | RNVC: 2
34 1472: RNCC: 5 | RNVC: 2

30 Apr 2008

5340-99-324-1847
Electr Hardware Kit

5340-99-119-8912

5340-99-119-9489

5340-99-783-5098
Electrical-Mec Post

5340-99-123-8623

5340-99-120-5959

5340-99-120-5960

5340-99-119-1882
Clamp

5340-99-742-3256
Block Fairlead

997423256
A-730473-401: RNCC: 3 | RNVC: 2
A730473-401: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-785-3549
Grill

5340-99-541-6857
Retaining Band

5340-99-551-0082
Angle Bracket

5340-99-541-6508

5340-99-642-8556
Anchor Strap

5340-99-628-7903

5340-99-548-3434
Nonmetallic Bushing

995483434
SSN07M615-00-5-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-657-5057
Angle Bracket

996575057
P-931360-015: RNCC: 3 | RNVC: 2
P931360-015: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-553-7027
Mounting Plate

995537027
OE-B-14574: RNCC: 3 | RNVC: 2

30 Aug 2012

5340-99-939-0855
Metal Grille

999390855
363 2446: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-99-862-0918
Helical Compression Spring Seat

998620918
509510: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-915-3895
Angle Bracket

999153895
RRC 3764: RNCC: 3 | RNVC: 2

12 Oct 1993

5340-99-860-3134
Engine Accessory Bracket

998603134
NJ193703: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-99-915-4008
Dust And Moisture Seal Protective Cap

999154008
HTE850088: RNCC: 3 | RNVC: 2
HTE850088: RNCC: 5 | RNVC: 2

6 Oct 1994

5340-99-920-1653
Double Angle Bracket

999201653
FV 840064: RNCC: 3 | RNVC: 2
FV 840064: RNCC: 5 | RNVC: 2

16 Apr 1998

5340-99-918-0145
General Purpose Resilient Mount

999180145
11056369: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-99-911-0074
Bail Handle

999110074
A63108: RNCC: 3 | RNVC: 2

14 Oct 1980

5340-99-197-2466
Bushing

991972466
B68-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-668-8380
Bracket

996688380
M5725531320000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-917-8641
Access Cover

999178641
60228302: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-99-149-7868
Mounting Bracket

991497868
FV2228798: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-99-859-8048
Access Cover

998598048
MBEU83159: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-99-911-2709
Handle Grip

999112709
215-3959: RNCC: 3 | RNVC: 2

12 Aug 2013

5340-99-911-2417
Mounting Plate

999112417
3790-37B: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-99-625-6760
Dust And Moisture Seal Protective Cap

996256760
SA9570-6: RNCC: 3 | RNVC: 2
A4/712229: RNCC: 5 | RNVC: 2
010280: RNCC: 5 | RNVC: 2
62346-453-7: RNCC: 5 | RNVC: 2
FWMP7522: RNCC: 5 | RNVC: 2
FS03816: RNCC: 5 | RNVC: 2
SA9570: RNCC: 5 | RNVC: 2
13227-3A11TEM23: RNCC: 5 | RNVC: 2
5CW15102: RNCC: 6 | RNVC: 9
5330-99-111-3060: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-787-4882
Angle Bracket

997874882
GM-B 115258: RNCC: 3 | RNVC: 2
83904055: RNCC: 5 | RNVC: 2
0346A-048: RNCC: 6 | RNVC: 9

1 Dec 2003

5340-99-702-7100
Mechanical Stop

997027100
OE-C-13270: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-99-577-2912
Catch Strike

995772912
2276/001: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-99-559-1911

5340-99-559-1912

5340-99-396-1235
Mounting Bracket

5340-99-396-1006
Screw Thread Insert

5340-99-646-5321

5340-99-663-7620
Tube Expander

5340-99-631-5478

5340-99-400-1280

Load More Results