What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 23 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 23 of 368

5340-99-840-2235
Loop Clamp

998402235
EF817B32: RNCC: 1 | RNVC: 2
11944D32B: RNCC: 3 | RNVC: 2
TA028M015HC32: RNCC: 3 | RNVC: 2
11944D32B: RNCC: 5 | RNVC: 2
TA028M015HC32: RNCC: 5 | RNVC: 2
1ME9926: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-742-8626
Hinged Lug

997428626
24-17-01: RNCC: 3 | RNVC: 2
AA/CSB/080: RNCC: 6 | RNVC: 9

8 May 1991

5340-99-027-0607
Engine Accessory Bracket

990270607
B498094: RNCC: 3 | RNVC: 2
36PG786: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-420-9710
Access Cover

994209710
BA63064: RNCC: 3 | RNVC: 2
36VV9929: RNCC: 6 | RNVC: 9

23 Oct 1979

5340-99-874-1258
General Purpose Resilient Mount

998741258
6330780: RNCC: 3 | RNVC: 2
LV7BD6330780: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-216-0304
Mounting Plate

992160304
FV2300177: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-99-650-2655
Webbing Strap

996502655
FV 2112151: RNCC: 3 | RNVC: 2
FV 2112151: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-477-2045
Exh Universal Clamp

994772045
ND20161N: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-228-4225
Bracket

992284225
M5725811920100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-626-9497
Dus Protective Plug

996269497
HRAA203: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-087-0978
Access Cover

990870978
JRB7011: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-99-462-6656
Piston

5340-99-881-3551
Loop Clamp

5340-99-844-4466
Mounting Plate

5340-99-523-0638
Rim Lock Key

995230638
FK4: RNCC: 3 | RNVC: 1
D6145401TEM18: RNCC: 5 | RNVC: 2
FK4WB: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-646-2824
Extens Drawer Slide

5340-99-204-7249
Rod End Clevis

992047249
B25041: RNCC: 3 | RNVC: 2
B25041: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-562-3885
Foot

995623885
3116492: RNCC: 3 | RNVC: 2
0018O-097: RNCC: 6 | RNVC: 9

29 Jun 2000

5340-99-151-4108
Access Cover

991514108
MC1642187: RNCC: 3 | RNVC: 2
MC1642000 ITEM 70: RNCC: 5 | RNVC: 2

9 Oct 2009

5340-99-219-7636
Retaining Strap

992197636
378/7117: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-99-386-7377
Webbing Strap

993867377
MBEU-4783-DP: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-99-666-3847
Handwheel

996663847
MBEU148680: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-99-096-3679
Withdr Clamp Halves

990963679
MBEU147609: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-99-471-2208
Dust And Moisture Seal Protective Cap-Plug

994712208
G101/5645/11: RNCC: 3 | RNVC: 2
G101/5645 ITEM 11: RNCC: 5 | RNVC: 2

13 Dec 2001

5340-99-551-2969
Retaining Strap

995512969
3300296R1: RNCC: 3 | RNVC: 2
FJ5340995512969: RNCC: 6 | RNVC: 9

15 Jul 1998

5340-99-372-4265
Clip

993724265
570522: RNCC: 3 | RNVC: 2
570522: RNCC: 5 | RNVC: 2

24 Mar 1995

5340-99-269-4241
Double Angle Bracket

992694241
M3625017000000: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-99-471-5696
Loop Clamp

994715696
CK0517340: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-99-617-0916
Dust And Moisture Seal Protective Cover

996170916
HLN1566: RNCC: 3 | RNVC: 2
HLN1566: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-438-5424
Bail Handle

994385424
A1170296: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-99-420-8936
Nonmetallic Bushing

994208936
BR51811: RNCC: 3 | RNVC: 2
36VV23505: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-513-7212
Thumb Latch Plate

995137212
0660/101: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-99-374-3126
Access Cover

993743126
4003B464: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-99-377-5862
Bracket Assy

993775862
M5725531200000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-117-1432
Electrical-Mec Post

991171432
000E103595: RNCC: 3 | RNVC: 2
E103595: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-450-1528
Dust And Moisture Seal Protective Cap

994501528
PL-RPV: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-99-549-1719
Double Angle Bracket

995491719
ALR9199: RNCC: 3 | RNVC: 2
FJ9615L1731: RNCC: 6 | RNVC: 9

23 Aug 1996

5340-99-710-1747
Screw Thread Insert

997101747
NM88386: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-976-4855
Access Cover

999764855
POG119933: RNCC: 3 | RNVC: 2
40007896: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-99-206-2640
Retaining Strap

992062640
GMA74312: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-727-6639
Dust And Moisture Seal Protective Cap

997276639
217-7352: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-99-428-8273
Snap Hook

994288273
AML10684: RNCC: 3 | RNVC: 2
26DB5810: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-435-2925
Cushioning Pad

994352925
947/99949: RNCC: 3 | RNVC: 2
CV137493: RNCC: 5 | RNVC: 2

6 Dec 2013

5340-99-101-8365
Dust And Moisture Seal Protective Cover

991018365
RU6463: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-405-6177
Hand Crank

994056177
D178C: RNCC: 3 | RNVC: 2
X3XCLRD178C: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-573-7447
Modification Set

995737447
POG014101: RNCC: 3 | RNVC: 2
FF980JT0001: RNCC: 6 | RNVC: 9

17 Nov 1997

5340-99-215-2846
Spring Tension Clip

992152846
FV2157795: RNCC: 3 | RNVC: 2
339500190: RNCC: 5 | RNVC: 2

15 May 1992

5340-99-494-1857
Bottom Plunger

994941857
AM 01 01 24024: RNCC: 3 | RNVC: 2
60108882: RNCC: 5 | RNVC: 2

5 Dec 2005

5340-99-225-8678
Locking Ring

992258678
87840170: RNCC: 3 | RNVC: 2

11 May 2004

5340-99-707-3595
Detent Plunger

997073595
LR005016: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-99-538-0352
Retaining Strap

995380352
NM65270: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-301-0567
Cable Channel

993010567
A2 506940: RNCC: 3 | RNVC: 2
506940: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-99-528-0275
Hinge Bracket

995280275
B132655: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-122-2325
Leather Strap

991222325
1DWC695SH6: RNCC: 3 | RNVC: 1
M3MC3562: RNCC: 3 | RNVC: 2
M3MC3562: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-6954

5340-99-635-3231
Electrical-Mec Post

996353231
3990-65543: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-496-1317
Mounting Bracket

994961317
126158: RNCC: 3 | RNVC: 2
022P60088: RNCC: 6 | RNVC: 9

17 Sep 2002

5340-99-517-3473
Safety Catch

995173473
AIR124254: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-99-538-0878
Loop Clamp

995380878
7NM63801: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-244-1185
Threaded Rod End

992441185
B753A0001: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-99-668-5267
Handwheel

996685267
5080592: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-99-110-8768
Nut And Bolt Retainer

991108768
KU36731: RNCC: 3 | RNVC: 2
36SN2589: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-414-8726
Spring Tension Clip

994148726
BA50363: RNCC: 3 | RNVC: 2
36VV3365: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-538-7388
Double Angle Bracket

995387388
RUA4569: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-300-9000
Bracket

993009000
M5725036320000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-639-0648
Angle Bracket

996390648
Y041DG420033: RNCC: 3 | RNVC: 2

15 Apr 1986

5340-99-626-3202
Mounting Bracket

996263202
3AB20630: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-801-7764
Dust And Moisture Seal Protective Cover

998017764
FV 556723: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-812-2588
Articulated Sh Link

998122588
OG0250038: RNCC: 3 | RNVC: 2
WE104C1: RNCC: 6 | RNVC: 9

24 Jun 1998

5340-99-164-9001
Access Cover

991649001
77800967: RNCC: 3 | RNVC: 2
77800967: RNCC: 5 | RNVC: 2

16 Sep 1999

5340-99-802-6455
Mounting Bracket

998026455
FV602792: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-527-1727
Extension Drawer Slide

995271727
5012TN19-75LH: RNCC: 3 | RNVC: 2
12448-30926: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-821-4253
Stiffener

998214253
500300919: RNCC: 3 | RNVC: 2

9 May 2011

5340-99-806-4068
Retaining Strap

998064068
NKH918: RNCC: 3 | RNVC: 2
3750705: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-714-8609
Electrical-Mec Post

997148609
26519: RNCC: 3 | RNVC: 2
B15871SH2: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-226-2844
Caster Wheel

992262844
PS1203: RNCC: 3 | RNVC: 2
CV199970: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-99-810-8279
Access Cover

998108279
FT 21561: RNCC: 3 | RNVC: 2
FT20601: RNCC: 5 | RNVC: 2

24 Jun 1997

5340-99-613-3589
Angle Bracket

996133589
FV2283943: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-99-391-3112
Mounting Plate

993913112
333/C3651: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-99-562-4367
Lug

995624367
AS54783: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-99-693-1294
Access Cover

996931294
POG117605: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-99-721-1727
Top Plate Assembly

997211727
FV848744: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-99-593-2195
Spring Tension Clip

995932195
FV 839698: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-419-2164
Mounting Bracket

994192164
SDA139433: RNCC: 3 | RNVC: 2
Z1ZA47502: RNCC: 6 | RNVC: 9

25 Jul 1979

5340-99-168-8232
Webbing Strap

991688232
RDH2150: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-99-451-4811
Spacing Threaded Standoff

994514811
A2N25000334: RNCC: 3 | RNVC: 2

3 Jan 2002

5340-99-712-4896
General Purpose Resilient Mount

997124896
1113PG: RNCC: 3 | RNVC: 2
C648: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-365-4807
Mounting Bracket

993654807
697057231: RNCC: 3 | RNVC: 2

5 Nov 2007

5340-99-450-1619
Mounting Plate

994501619
MBEU 110154: RNCC: 3 | RNVC: 2
CMBEU 110154: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-99-464-3500
Rod End Clevis

994643500
829545: RNCC: 3 | RNVC: 2

28 Jan 2013

5340-99-350-8286
Bearing

993508286
353MZ2-80B: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-444-1030
Clip

994441030
UN68010: RNCC: 3 | RNVC: 2
UN6810: RNCC: 5 | RNVC: 9

28 Jun 2000

5340-99-322-3863
Mechanic Equipment Hardware Kit

993223863
SMALL BOLTS,WASHERS AND NUTS: RNCC: 3 | RNVC: 2

15 Aug 2012

5340-99-613-9682
Electrical-Mechanical Equipment Post

996139682
R4427-02: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-99-779-6251
Mounting Bracket

997796251
MBEU147701: RNCC: 3 | RNVC: 2
MBEU147701: RNCC: 8 | RNVC: 2

24 Nov 1992

5340-99-301-1566
Seat Firing Han Cap

993011566
MBEU141229: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-99-783-3646
Dustcap

997833646
77/9241: RNCC: 3 | RNVC: 2
G424/5202 ITEM 11: RNCC: 5 | RNVC: 2
G424/5202/11: RNCC: 5 | RNVC: 2
ABB20XPCAK: RNCC: 5 | RNVC: 2

1 Oct 2002

5340-99-256-9536
Angle Bracket

992569536
FV2048057: RNCC: 3 | RNVC: 2
HH2/MV 0553: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-167-5657
Loop Clamp

991675657
40006916: RNCC: 3 | RNVC: 2
03017877: RNCC: 5 | RNVC: 2

28 Jun 2013

5340-99-668-1455
Mounting Plate

996681455
GD00498962: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-99-667-6267
Rigid Caster

996676267
306002: RNCC: 3 | RNVC: 2

17 May 2010

5340-99-109-0603
Loop Clamp

991090603
B57547: RNCC: 3 | RNVC: 2
36AH3972: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-440-4809
Shear Block

994404809
69302140: RNCC: 3 | RNVC: 2
FF962UP0029: RNCC: 6 | RNVC: 9

25 Sep 1996

5340-99-867-2407

5340-99-372-4374
Pipe Hanger

993724374
414028: RNCC: 3 | RNVC: 2
FJ9704U0001: RNCC: 6 | RNVC: 9

20 Mar 1997

5340-99-635-8341
Bow Handle

996358341
828904: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-377-5806
Bracket Assy

993775806
M5755472100000: RNCC: 3 | RNVC: 2

16 Jun 2012

5340-99-315-0218
Access Cover

993150218
14532215: RNCC: 3 | RNVC: 2
CV186287: RNCC: 5 | RNVC: 2
VOE14532215: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-242-8633
Access Cover

992428633
B508277: RNCC: 3 | RNVC: 2

24 May 1999

5340-99-201-2321
Access Cover

992012321
HD63: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-99-668-0080
Mounting Bracket

996680080
14545479: RNCC: 3 | RNVC: 2
CV186426: RNCC: 5 | RNVC: 2
VOE14545479: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-610-9241
Block Fairlead

996109241
13703E57: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-168-9843
Loop Clamp

991689843
V2: RNCC: 3 | RNVC: 2
C840: RNCC: 5 | RNVC: 1
2744: RNCC: 5 | RNVC: 2

6 Mar 1996

5340-99-834-1655
Angle Bracket

998341655
FV744807: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-839-1943
Bracket

998391943
M5755516520100: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-99-350-6364
Hook

993506364
FV 2040334: RNCC: 3 | RNVC: 2
FV 2040334: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-99-712-1016
Retaining Strap

997121016
UC302345: RNCC: 3 | RNVC: 2
27Q26828: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-438-7842
Slider

994387842
GA65023: RNCC: 3 | RNVC: 2

25 Aug 1994

5340-99-613-5075
Mounting Plate

996135075
331/54824: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-99-290-6867
Mounting Plate

992906867
80019903: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-427-0978
Nut And Bolt Locking Plate

994270978
BA53669: RNCC: 3 | RNVC: 2
36VV4541: RNCC: 6 | RNVC: 9
36VV4541: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-402-7133
Mounting Bracket

994027133
G406/9235/2: RNCC: 3 | RNVC: 2
G406/9235 ITEM 2: RNCC: 5 | RNVC: 2
400.15.1C: RNCC: 6 | RNVC: 9

20 Jul 2004

5340-99-155-3812

5340-99-125-0088
Plain Stop

991250088
PN1159: RNCC: 3 | RNVC: 2
29H1900: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-811-8528
Mounting Bracket

998118528
JRC 1378: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-99-822-5791
Loop Clamp

998225791
0E9088: RNCC: 3 | RNVC: 2
Y038 497 05: RNCC: 5 | RNVC: 2
Y038 423 10: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-288-7353
Fastener

992887353
EZM500050: RNCC: 3 | RNVC: 2

10 Sep 2008

5340-99-279-8086
Helical Compression Spring Seat

992798086
UX50671: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-99-803-3047
Screw Thread Insert

5340-99-657-0226
Resilient Mount

996570226
11212: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-408-9015
Retaining Strap

994089015
B5602: RNCC: 3 | RNVC: 2
61BR40131: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-341-1304
Access Door Hinge

993411304
S528549: RNCC: 3 | RNVC: 2

4 Nov 1997

5340-99-657-7685
Mounting Bracket

996577685
JJ103970: RNCC: 3 | RNVC: 2
JJ103970: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-712-2813
Threaded End Tensioning Tie Rod

997122813
8SS1945: RNCC: 3 | RNVC: 2
SS1945: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-167-5565
Door Screen

991675565
40M1053: RNCC: 3 | RNVC: 2

8 May 2012

5340-99-822-9725
Synchro Clamp

998229725
DU 498: RNCC: 3 | RNVC: 2
PT10157: RNCC: 5 | RNVC: 2
PT10157S: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-912-9546
Butt Hinge

999129546
FV2265070: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-99-810-6960
Nut And Bolt Locking Plate

998106960
5880331: RNCC: 3 | RNVC: 2
588D0331: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-811-1113
Bow Handle

998111113
FV 2186223: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-802-5320
Escutcheon Plate

998025320
7175421: RNCC: 3 | RNVC: 2
B125PV116: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-810-4048
Mounting Plate

998104048
FV 2209059: RNCC: 3 | RNVC: 2

23 Mar 1995

5340-99-806-4641
Retaining Clip

998064641
53295: RNCC: 3 | RNVC: 2
LV6MT8SS53295: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-805-8614
Spring Tension Clip

998058614
513940: RNCC: 3 | RNVC: 2
90513940: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-803-4391
Access Cover

998034391
7171867: RNCC: 3 | RNVC: 2

21 Jul 1978

5340-99-810-1481
Strap Fastener Loop

998101481
1002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-802-6706
Loop Clamp

998026706
FV570769: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-823-5638
Retaining Strap

998235638
FV 663353: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-801-7720
Resilient Mount

998017720
0483002: RNCC: 3 | RNVC: 2
A81945: RNCC: 6 | RNVC: 9
61AE41958: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-195-4409
Manual Control Lever

991954409
PBCA1094: RNCC: 3 | RNVC: 2
510AS49: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-102-8321
Bridge Clamp

991028321
FL234: RNCC: 3 | RNVC: 2

13 May 1988

5340-99-661-9293
Dust Protective Cap

996619293
281084201: RNCC: 3 | RNVC: 2

17 Feb 1995

5340-99-601-1360
Tubular Fairlead

996011360
6M4CF5427ND: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-603-7434
Multiple Angle Bracket

996037434
F282887: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-647-5801
Access Cover

996475801
77144766: RNCC: 3 | RNVC: 2
X77144766: RNCC: 5 | RNVC: 2
77144766: RNCC: 8 | RNVC: 2

25 Apr 1991

5340-99-664-8980
Retaining Strap

996648980
111245-2971: RNCC: 3 | RNVC: 2
111245-2971: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-485-3172
Plate

994853172
AE8408GSEREF5: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-99-149-3306
Block Clamp

991493306
116487SHT41: RNCC: 3 | RNVC: 2
116487SH41: RNCC: 5 | RNVC: 9
116487SHT41: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-828-0382
Intake Air Bracket

998280382
FV 871731: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-8843
Handwheel

5340-99-838-5032
Loop Clamp

998385032
FV1016652: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-99-153-4529
Catch Strike

991534529
50051623: RNCC: 3 | RNVC: 2

7 Jan 2013

5340-99-875-3132
Manual Control Handle

998753132
FV2280237: RNCC: 3 | RNVC: 2

14 May 2007

5340-99-952-1110
Retaining Strap

999521110
17-63410: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-949-6477
Mounting Plate

999496477
5AB36733: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-949-9850
End Plate

999499850
MEXE45118: RNCC: 3 | RNVC: 2

3 Jun 1993

5340-99-911-1438
Webbing Strap

999111438
N07966: RNCC: 3 | RNVC: 2

9 Jun 1994

5340-99-911-2471
Mechanic Equipment Hardware Kit

999112471
CRGS100999: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-99-951-5846
Nonmetallic Bushing

999515846
A16215: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-930-3415
Mounting Bracket

999303415
40007648: RNCC: 3 | RNVC: 2

31 May 2012

5340-99-273-7961
Piton

992737961
SE002323: RNCC: 3 | RNVC: 2

11 May 2006

5340-99-610-9476
Retaining Strap

996109476
137114E7: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-8643
Bow Handle

991538643
MEXE 36040: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-99-400-0016
Expansion Plug

994000016
15W73: RNCC: 3 | RNVC: 2
61SC10113: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-257-2598
Access Cover

992572598
60233123: RNCC: 3 | RNVC: 2

29 Nov 2013

5340-99-280-7254
Blank Key

992807254
09620074: RNCC: 3 | RNVC: 2
FL991JZ0176: RNCC: 6 | RNVC: 9

20 Dec 1999

5340-99-126-0042
Cushioning Pad

991260042
FV 2137171: RNCC: 3 | RNVC: 2
FV 2137171: RNCC: 5 | RNVC: 2

13 Oct 1994

5340-99-837-8833
Cremone Bolt

998378833
78VBV264A64AA: RNCC: 3 | RNVC: 2
1587502: RNCC: 5 | RNVC: 2
6104151: RNCC: 5 | RNVC: 2
81VBV264A64AA: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-9137
General Purpose Resilient Mount

998349137
8908647: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-847-5023
Retaining Band

998475023
115597: RNCC: 3 | RNVC: 2
SK11433: RNCC: 5 | RNVC: 1
115597: RNCC: 5 | RNVC: 9
SK11433: RNCC: 5 | RNVC: 9
LV7TY115597: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-835-0136
Plain Solid Disk

998350136
6835930: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-837-9562
Panel

998379562
0141055: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-99-837-8488
Rubber Bumper

998378488
T6074B57: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-834-7854
Synchro Clamp

998347854
DC26050: RNCC: 3 | RNVC: 2

3 Jul 2007

5340-99-968-1522
Mounting Plate

999681522
CM58141: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-99-976-0476
Angle Bracket

999760476
EU77854: RNCC: 3 | RNVC: 2

24 Feb 2007

5340-99-839-8525
Adjusting Link

998398525
282981: RNCC: 3 | RNVC: 2
LV7LD282981: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-977-4663
Dust And Moisture Seal Protective Cover

999774663
01TC10684: RNCC: 3 | RNVC: 2
01TC10684: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-837-2081
Catch Strike

998372081
907075: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-840-5381
Access Cover

998405381
189-8780: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-99-977-2492
Grille Moun Grommet

999772492
J4370: RNCC: 3 | RNVC: 2
G6094: RNCC: 5 | RNVC: 2
Y01673910: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-968-5538
Access Cover

999685538
IM4684: RNCC: 3 | RNVC: 2

22 Oct 2008

5340-99-301-8306
Mounting Plate

993018306
AS68923: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-99-152-6049
Strap

991526049
B091509: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-99-287-2351
Electronic Equipment Hardware Kit

992872351
68 441: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-99-524-9823
Access Cover

995249823
AS70057: RNCC: 3 | RNVC: 2
FO965831661: RNCC: 6 | RNVC: 9

16 May 1997

5340-99-838-5701
Retaining Strap

998385701
FV471438: RNCC: 3 | RNVC: 2
FV471438: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-835-6317
Access Cover

998356317
AMP 01 01 42006: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-99-279-9039
Mounting Plate

992799039
40002654: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-99-730-4933
Swivel Caster

997304933
S3S13254000: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-99-253-3383
Mounting Bracket

992533383
BM2976B02/C0102: RNCC: 3 | RNVC: 2
BM2976B: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-485-3483
Loop Clamp

994853483
15/914802: RNCC: 3 | RNVC: 2

5 May 2009

5340-99-918-3416
Access Cover

999183416
MEXE25348: RNCC: 3 | RNVC: 2

16 May 1991

5340-99-836-7076
Double Angle Bracket

998367076
9065520: RNCC: 3 | RNVC: 2
9065520: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-930-4689
Dust Protective Cap

999304689
SD6168: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-663-4890
Mounting Bracket

996634890
FV 2218907: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-99-841-9373
Loop Clamp

998419373
FV2261512: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-99-833-1168
Access Cover

998331168
7139451: RNCC: 3 | RNVC: 2
LV7BD7139451: RNCC: 6 | RNVC: 9

25 Apr 1977

5340-99-633-4975
Mounting Bracket

996334975
JLB4638: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-641-4549
Loop Clamp

5340-99-652-4034

5340-99-939-0727
Strap Hinge

999390727
1927501: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-939-1255
Door Hasp

999391255
P549583: RNCC: 3 | RNVC: 9

24 Feb 2009

5340-99-952-4203
Identification Clip

999524203
AGS2089: RNCC: 2 | RNVC: 2
B46650: RNCC: 5 | RNVC: 2
28N9524203: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-714-8518
Manual Control Lever

997148518
MBEU14304: RNCC: 3 | RNVC: 2
0MBEU14304: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-867-9094
Mounting Bracket

998679094
14557479: RNCC: 3 | RNVC: 2
VOE14557479: RNCC: 5 | RNVC: 2
CV185980: RNCC: 5 | RNVC: 2

2 Jun 2011

5340-99-949-9970
Retaining Band

999499970
FV520350: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-968-6762
Plug Button

999686762
504085544: RNCC: 3 | RNVC: 2

6 May 2011

5340-99-712-3043
Loop Clamp

997123043
17SS3264: RNCC: 3 | RNVC: 2
SS3264: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-840-8096
Mounting Bracket

998408096
FV 2260042: RNCC: 3 | RNVC: 2

3 Feb 2006

5340-99-834-0035
Retaining Strap

998340035
FV840509: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-840-4807
Mounting Bracket

998404807
C201899: RNCC: 3 | RNVC: 2
C201899: RNCC: 5 | RNVC: 2

25 Jul 2013

5340-99-839-3002
Webbing Strap

998393002
FV 994794: RNCC: 3 | RNVC: 2
FV 994794: RNCC: 5 | RNVC: 2
FP990A00007: RNCC: 6 | RNVC: 9

8 Feb 1999

5340-99-260-8228
Mounting Plate

992608228
FV 2220157: RNCC: 3 | RNVC: 2
FV 2220157: RNCC: 5 | RNVC: 2

7 Sep 1999

5340-99-647-0467
Angle Bracket

996470467
JJ19399: RNCC: 3 | RNVC: 2
JJ19399: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-729-8142
Helical Compression Spring Retainer

997298142
A21081: RNCC: 3 | RNVC: 2
106144050064: RNCC: 5 | RNVC: 2
2267810: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-729-8448
Section Block Clamp

997298448
NHJ955: RNCC: 3 | RNVC: 2
866AK6043: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-477-4864
Filler Opening Cap

994774864
P3342: RNCC: 3 | RNVC: 1
UT23591: RNCC: 5 | RNVC: 2

3 Oct 1992

5340-99-116-3029
Casting Machined

991163029
10024637-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-873-2344
Door Handle

998732344
VDS428.100.152: RNCC: 3 | RNVC: 2
200059: RNCC: 5 | RNVC: 2
VDS428.100.152: RNCC: 5 | RNVC: 9

15 Feb 2010

5340-99-867-8652
Mounting Bracket

998678652
0208807: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-99-968-7588
Mounting Bracket

999687588
CU59275A: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-99-849-1304
Retaining Strap

998491304
FV137042: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-846-5135
General Purpose Resilient Mount

998465135
133191: RNCC: 3 | RNVC: 2
0821TY133191: RNCC: 6 | RNVC: 9
61TH40355: RNCC: 6 | RNVC: 9
LV7TY133191: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-837-0364
Mounting Bracket

998370364
62877: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-99-839-6224
Nut And Bolt Locking Plate

998396224
258311: RNCC: 3 | RNVC: 2
LV7LD258311: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-838-5131
Loop Clamp

998385131
FV 964019: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-835-7526
Access Cover

998357526
A72750: RNCC: 3 | RNVC: 2
LV7FWA72750: RNCC: 6 | RNVC: 9

1 Mar 1977

5340-99-957-7409
Loop Clamp

999577409
EN4113F06WH: RNCC: 2 | RNVC: 2

27 Apr 2001

5340-99-371-1875
Assembly Clamp

993711875
21E21605: RNCC: 3 | RNVC: 2

13 Nov 2009

5340-99-968-5297
Mounting Plate

999685297
8251830891: RNCC: 3 | RNVC: 2

2 Jan 2008

5340-99-968-8025
Mounting Bracket

999688025
WF19: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-99-849-8193
Dust And Moisture Seal Boot

998498193
301437: RNCC: 3 | RNVC: 2
61RV40603: RNCC: 6 | RNVC: 9
LV7RU301437: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-849-1194
Bracket

998491194
M5755459820000: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-840-8105
Mounting Plate

998408105
12739404: RNCC: 3 | RNVC: 2
CV142388: RNCC: 5 | RNVC: 2
12739404: RNCC: 5 | RNVC: 2

13 May 2008

5340-99-834-1650
Retainer Strip

998341650
FV701659: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-840-3792
Bracket Assy

998403792
M2825034100100: RNCC: 3 | RNVC: 2

23 May 2012

5340-99-834-8359
Angle Bracket

998348359
52999: RNCC: 3 | RNVC: 2

12 Oct 2007

5340-99-838-0550
General Purpose Resilient Mount

998380550
13-1672: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-4949
Angle Bracket

998384949
FV994002: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-956-4193
Dust And Moisture Seal Protective Cover

999564193
FS32367: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-3175
Retainer

998383175
80 000 005: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-99-957-9938
Abs Socket

999579938
090-602: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-837-0734
Corner Brace

998370734
40001960: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-837-7269
Access Cover

998377269
FG19973: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-600-4534
Access Cover

996004534
6M4WC8513: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-200-3571
Clamping Catch

992003571
FV182118: RNCC: 3 | RNVC: 2
109125T: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-949-5245
General Purpose Resilient Mount

999495245
RE11715: RNCC: 3 | RNVC: 2
ZA56134: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-837-7843
Mechanic Equipment Hardware Kit

998377843
PE37951: RNCC: 3 | RNVC: 2

8 Jan 2013

5340-99-838-5404
Loop Clamp

998385404
FV937548: RNCC: 3 | RNVC: 2

26 Feb 1991

5340-99-529-9867
Retaining Clip

995299867
DP460: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-628-3219
Electrical-Mec Post

996283219
4EA14403: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-226-3026
Support Hook

992263026
541208427: RNCC: 3 | RNVC: 2
CV201141: RNCC: 5 | RNVC: 2
541208427: RNCC: 5 | RNVC: 2

17 Sep 2013

5340-99-613-3116
Bracket

996133116
5551750041: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-99-432-1495
Webbing Strap

994321495
RTA505H10RS: RNCC: 3 | RNVC: 2
224-3388: RNCC: 5 | RNVC: 2
ASMTS4: RNCC: 6 | RNVC: 9

20 Oct 2000

5340-99-535-8939
Mounting Plate

995358939
NLC 19039: RNCC: 3 | RNVC: 2
CL 4132: RNCC: 5 | RNVC: 2

27 Feb 2001

5340-99-840-2034
Loop Clamp

998402034
01018VT: RNCC: 3 | RNVC: 2

1 Aug 1994

5340-99-839-9484
Retaining Strap

998399484
600400: RNCC: 3 | RNVC: 2
LV7LD600400: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-839-9267
Access Cover

998399267
MM11428: RNCC: 3 | RNVC: 2

13 Apr 1993

5340-99-913-8585
Spring Tension Clip

999138585
RRA513329: RNCC: 3 | RNVC: 2
RRA513329: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-125-7881
Mounting Plate

991257881
FV 2068645: RNCC: 3 | RNVC: 2
FV 2068645: RNCC: 5 | RNVC: 2

8 Sep 1992

5340-99-325-0513
Vehicular Lock Cylinder

993250513
K504310: RNCC: 3 | RNVC: 2

9 Dec 2005

5340-99-653-8615
Angle Bracket

996538615
A2ND1023A: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-424-3282
Access Cover

994243282
A200491: RNCC: 3 | RNVC: 2
A200491: RNCC: 5 | RNVC: 9
26FX5201: RNCC: 6 | RNVC: 9
26FX5201: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-881-3550
Loop Clamp

998813550
FV533536: RNCC: 3 | RNVC: 2
LV6MT4FV533536: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-881-1366
Spring Tension Clip

998811366
PE30578: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-99-964-8219
Spacing Threaded Standoff

999648219
0S87348: RNCC: 3 | RNVC: 2
0C9140A104: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-894-8936
Webbing Strap

998948936
E20,000X2M EWL: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-99-874-6324
Mounting Bracket

998746324
FV 2262465: RNCC: 3 | RNVC: 2
FV 2262465: RNCC: 5 | RNVC: 2

6 Nov 2004

5340-99-840-7514
Retaining Band

998407514
49238: RNCC: 3 | RNVC: 2
49238: RNCC: 5 | RNVC: 9
LV7MD49238: RNCC: 6 | RNVC: 9
X3XCMS49238: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-833-8554
Mounting Plate

998338554
KL 1568,700: RNCC: 3 | RNVC: 2

31 Mar 2004

5340-99-840-9568
Webbing Strap

998409568
E12,000X4.2M EWL: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-99-839-2913
Bracket Assy

998392913
M5725530200000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-411-1348
Foam

994111348
6930654: RNCC: 3 | RNVC: 2
FF9530C0114: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-110-7734
Retaining Strap

991107734
AX51236: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-867-5057
Turnbuckle

5340-99-413-5542
Butt Hinge

5340-99-976-3321

5340-99-459-6523
Block Fairlead

994596523
25CW327/3: RNCC: 3 | RNVC: 2
26TD2009: RNCC: 6 | RNVC: 9
26TD-2009: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-432-9594
Loop Clamp

994329594
AS1901-B: RNCC: 2 | RNVC: 2
AS1901B: RNCC: 5 | RNVC: 2
5K3004: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-668-6497
Mounting Plate

996686497
P-911130-421: RNCC: 3 | RNVC: 2
P911130-421: RNCC: 5 | RNVC: 2
TORNADO-8610: RNCC: 6 | RNVC: 9

15 Nov 2012

5340-99-796-0436
Block Fairlead

997960436
P-910644-003: RNCC: 3 | RNVC: 2
P910644-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-5041
Manual Control Lever

998155041
898-210M92: RNCC: 3 | RNVC: 2
898210M92: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-623-8496
Angle Bracket

996238496
0700D24004-101: RNCC: 3 | RNVC: 2
0700D24004/3: RNCC: 5 | RNVC: 2
0700D24004 ITEM 3: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-99-344-3550
Relay Panel

993443550
EA2400B001-061: RNCC: 3 | RNVC: 2

27 Jul 2002

5340-99-103-3132
Hinge Bracket

991033132
H13-10-1516: RNCC: 3 | RNVC: 2
H13-45-719: RNCC: 5 | RNVC: 2
SRH13-10-1516: RNCC: 5 | RNVC: 2
26SW2134: RNCC: 6 | RNVC: 9
26SW2134: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-645-8631
Mounting Bracket

996458631
60-33-01-166: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-718-9566
Metal Shipping Plug

997189566
NO PRIMARY REF 99-718-9566: RNCC: 3 | RNVC: 2
462092: RNCC: 5 | RNVC: 2
834946: RNCC: 5 | RNVC: 2

13 May 1986

5340-99-320-0269
Ho Attachment Plate

993200269
EU5305G501-045: RNCC: 3 | RNVC: 2
06241-131: RNCC: 6 | RNVC: 9

19 Aug 2005

5340-99-784-4693
Loop Clamp

997844693
453 7091-085: RNCC: 3 | RNVC: 2
453 7461-001: RNCC: 5 | RNVC: 2
0436430: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-496-1214
Tubular Fairlead

994961214
115036-821: RNCC: 3 | RNVC: 2
26VC17629: RNCC: 6 | RNVC: 9

12 Feb 2002

5340-99-179-6932
Angle Bracket

991796932
124-09-10607: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-99-382-4949
Solenoid Plug

993824949
NO PRIMARY REF 99-382-4949: RNCC: 3 | RNVC: 2
MPMTW1: RNCC: 5 | RNVC: 2

8 Nov 2010

5340-99-445-6927
Loop Clamp

994456927
AS491-30: RNCC: 2 | RNVC: 2
P95A30: RNCC: 5 | RNVC: 2
26FZ24756: RNCC: 6 | RNVC: 9
4F3412: RNCC: 6 | RNVC: 9
4F3412: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-348-0488
Mounting Plate

993480488
31191-191: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-99-332-9462
Butt Hinge

993329462
8977: RNCC: 3 | RNVC: 1
E10/9462: RNCC: 5 | RNVC: 1
41ZZ1037: RNCC: 6 | RNVC: 9
366-329462: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-969-2478
Mounting Bracket

999692478
39108-268: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-99-615-4720
Block Fairlead

996154720
KB290K0322-000: RNCC: 3 | RNVC: 2
KB290K0322-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-126-2880
Angle Bracket

991262880
EA6322B810-103: RNCC: 3 | RNVC: 2
1MEK310: RNCC: 6 | RNVC: 9

1 May 1996

5340-99-928-7880
Mounting Bracket

999287880
EA2400A104-041: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-99-902-0821
Angle Bracket

999020821
2000-1559A00: RNCC: 3 | RNVC: 2
5158-11-006: RNCC: 5 | RNVC: 2
FW002B40049: RNCC: 6 | RNVC: 9

22 Mar 2001

5340-99-552-6080
Access Cover

995526080
NO PRIMARY REF 99-552-6080: RNCC: 3 | RNVC: 2
7813: RNCC: 5 | RNVC: 2
H930-042943: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-244-7084
Spring Holder

992447084
347-27: RNCC: 3 | RNVC: 2

2 Feb 1995

5340-99-676-5486
Mounting Plate

996765486
EU2500F019-101: RNCC: 3 | RNVC: 2

26 Jul 2008

5340-99-968-2481
Manual Control Handle

999682481
DR3229-0292SC: RNCC: 3 | RNVC: 2
FF97OJ30015: RNCC: 6 | RNVC: 9

17 Jul 1997

5340-99-216-0734
Mounting Plate

992160734
100402-3006-001: RNCC: 3 | RNVC: 2
100402-3006-001: RNCC: 5 | RNVC: 2

24 Jan 2012

5340-99-136-7294
Barrel Bolt

991367294
2002X41NCHR0M1UMPLATED: RNCC: 3 | RNVC: 2
1501-41NCHR0M1UMPLATED: RNCC: 3 | RNVC: 2
028-11N5-16SH00TX41NCHR0M1UMPLA-: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-629-0897
Nut And Bolt Retainer

996290897
WG0045-1065-102: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-380-7118
Angle Bracket

993807118
75A327783-2007: RNCC: 3 | RNVC: 2
034L0-092: RNCC: 6 | RNVC: 9

22 Dec 2003

5340-99-987-5914
Mounting Bracket

999875914
360-450-016: RNCC: 3 | RNVC: 2
FP180: RNCC: 6 | RNVC: 9

7 Oct 2009

5340-99-508-2877
Spring Tension Clip

995082877
CV160742: RNCC: 3 | RNVC: 2
9909-0035: RNCC: 5 | RNVC: 2

23 Apr 2009

5340-99-352-4885
Access Cover

993524885
HTE240001-073: RNCC: 3 | RNVC: 2

27 Sep 1991

5340-99-968-1530
Half Hinge

999681530
145S3911-10: RNCC: 3 | RNVC: 2

18 Jul 1995

5340-99-213-6329
Access Cover

992136329
NO PRIMARY REF 99-213-6329: RNCC: 3 | RNVC: 2
CPN064-0018: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-99-898-6008
Dust And Moisture Seal Protective Cap

998986008
HPLS-0551: RNCC: 3 | RNVC: 2
0307X-150: RNCC: 6 | RNVC: 9
030EO-006: RNCC: 6 | RNVC: 9

27 Jan 2003

5340-99-615-5020
Electrical-Mec Post

996155020
KB956L1200-000: RNCC: 3 | RNVC: 2
KB956L1200-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-345-7175
Bow Handle

993457175
15A-4300-01: RNCC: 3 | RNVC: 2
RSK-1646-01427: RNCC: 5 | RNVC: 2

5 Aug 2005

5340-99-647-0843
Angle Bracket

996470843
HTE9412-013: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-906-3524
Retaining Strap

999063524
54-61-00461-00: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-99-788-4124
Angle Bracket

997884124
BRW36153-1061A3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-615-0023
General Purpose Access Door

996150023
KB537K0104-002: RNCC: 3 | RNVC: 2
KB537K0104-002: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-669-0464
Multiple Angle Bracket

996690464
5300-1881: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-99-867-9196
Mounting Plate

998679196
RSK-1646-02369: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-99-615-4682
Clamp

996154682
7C34-16-2A: RNCC: 3 | RNVC: 2
7C34-16-2A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-961-4417
Extension Drawer Slide

999614417
31745-216: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-99-425-1400
Spring Tension Clip

994251400
S200-19: RNCC: 3 | RNVC: 2
88521-500-889: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-629-5009
Spring Tension Clip

996295009
WG0311-0503-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-114-5102
Dust And Moisture Seal Protective Cap

991145102
025-0469-000: RNCC: 3 | RNVC: 2
3409211: RNCC: 5 | RNVC: 2
025-0469-000: RNCC: 5 | RNVC: 9
36DE4891: RNCC: 6 | RNVC: 9
36SN945: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-258-9100
Dust And Moisture Seal Protective Cap

992589100
WS9137-4001: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-99-970-3785
Rim Clenching Clamp

999703785
NO PRIMARY REF 99-970-3785: RNCC: 3 | RNVC: 2
C14342: RNCC: 5 | RNVC: 2
C14342: RNCC: 5 | RNVC: 2
C14342: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-474-6987
Dust And Moisture Seal Protective Cover

994746987
WG1488-0162-041: RNCC: 3 | RNVC: 2
107J7-010: RNCC: 6 | RNVC: 9

24 Nov 2010

5340-99-313-4199
Handle

993134199
1646028-101: RNCC: 3 | RNVC: 2

30 Oct 1996

5340-99-968-6270
Dust And Moisture Seal Protective Cap

999686270
110554: RNCC: 3 | RNVC: 2
RR-11216-SC: RNCC: 5 | RNVC: 2

3 Aug 2010

5340-99-648-1282
Bumper

996481282
3854-03340: RNCC: 3 | RNVC: 2
A3854-03340: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-645-0002
Stud Mounting Plate

996450002
SD4-259850: RNCC: 3 | RNVC: 2
SD4-259850: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-513-8439
Enclosure

995138439
175443-001: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-99-973-6912
Mesh

999736912
WG1350-0306-125: RNCC: 3 | RNVC: 2

23 May 1996

5340-99-666-6409
Sound Cover

996666409
NO PRIMARY REF 99-666-6409: RNCC: 3 | RNVC: 2
G1Z2210E00-03: RNCC: 5 | RNVC: 2

28 Mar 2006

5340-99-551-1493
Slide Block

995511493
1172-IK-DTL-00432: RNCC: 3 | RNVC: 2
02341-020: RNCC: 6 | RNVC: 9

10 Oct 2002

5340-99-417-9541
Hinge

994179541
NO PRIMARY REF 99-417-9541: RNCC: 3 | RNVC: 2
29G1009: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-762-7900
Angle Bracket

997627900
19750-155: RNCC: 3 | RNVC: 2
0803S-013: RNCC: 6 | RNVC: 9

14 Feb 2008

5340-99-880-8300
Mounting Bracket

998808300
6X2H46084: RNCC: 3 | RNVC: 2
E046-481722: RNCC: 6 | RNVC: 9
E046-481722: RNCC: 6 | RNVC: 9
LE441B3: RNCC: 6 | RNVC: 9

8 Nov 1996

5340-99-882-5244
Section Block Clamp

998825244
110045-645: RNCC: 3 | RNVC: 2
26VC-12397: RNCC: 6 | RNVC: 9

24 Jan 2002

5340-99-337-8357
Block Fairlead

993378357
110033-107: RNCC: 3 | RNVC: 2
26VC-11089: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-894-1663
Roller Holder

998941663
MS-3143-049: RNCC: 3 | RNVC: 2
MS-3143-049: RNCC: 5 | RNVC: 2

16 Jan 2013

5340-99-871-6294
Mounting Actuator Plate

998716294
B05550-32234: RNCC: 3 | RNVC: 2
55-60-P244 ITEM 16: RNCC: 5 | RNVC: 2

3 Aug 2006

5340-99-895-9803
Door Catch Pin

998959803
EA5333B490-101: RNCC: 3 | RNVC: 2
QE941ME4027: RNCC: 6 | RNVC: 9

25 Oct 1994

5340-99-880-0413
Mechanic Equipment Hardware Kit

998800413
21203-176: RNCC: 3 | RNVC: 2

15 Nov 2010

5340-99-891-0911
Angle Bracket

998910911
5300-2017: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-99-821-7424
Retaining Band

998217424
SHC201-213: RNCC: 3 | RNVC: 2
70-99-506: RNCC: 5 | RNVC: 2
032U9-013: RNCC: 6 | RNVC: 9

30 Jul 2003

5340-99-900-4825
Sliding Stay

999004825
NO PRIMARY REF 99-900-4825: RNCC: 3 | RNVC: 2
KA87100-51: RNCC: 5 | RNVC: 2
TA20F: RNCC: 5 | RNVC: 9

1 Mar 1977

5340-99-544-6031
Retaining Band

995446031
K145-71A155: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-803-2773
Tube

998032773
V35-1124-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-418-8141
Retaining Strap

994188141
SDA89484: RNCC: 3 | RNVC: 2
SDA89484: RNCC: 5 | RNVC: 9
Z1ZA55489: RNCC: 6 | RNVC: 9
Z2-55489: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-500-6617
Handle Grip

995006617
AIR FILM TRANSPORTERS: RNCC: 3 | RNVC: 2
7773378: RNCC: 5 | RNVC: 2
TT7773378: RNCC: 6 | RNVC: 9
42-28770: RNCC: 6 | RNVC: 9
DJ000042H: RNCC: 6 | RNVC: 9

7 May 1997

5340-99-614-2190
Mounting Bracket

996142190
WG1382-0500-053: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-665-5784
Block Fairlead Section

996655784
110136-6237: RNCC: 3 | RNVC: 2
26VC18376: RNCC: 6 | RNVC: 9

22 Feb 2002

5340-99-315-1212
Bumper

993151212
3A326-0457: RNCC: 3 | RNVC: 2

9 Jun 2006

5340-99-823-6780
Loop Clamp

998236780
FV 738276: RNCC: 3 | RNVC: 2
FV 735621-69: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-297-7781
Mounting Bracket

992977781
FV2230083: RNCC: 3 | RNVC: 2
0748Q-007: RNCC: 6 | RNVC: 9

17 Aug 2007

5340-99-151-3671
Mounting Bracket

991513671
13-1589-1225: RNCC: 3 | RNVC: 2

3 Sep 2007

5340-99-878-8103
Mounting Bracket

998788103
J56100583-002: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-99-930-8342
Butt Hinge Leaf

999308342
N25200288-003: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-99-734-3493
Extension Drawer Slide

997343493
MM4008A03/00104: RNCC: 3 | RNVC: 2
MM4008A: RNCC: 5 | RNVC: 2
989009051: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-876-1536
Mounting Bracket

998761536
33633-216: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-99-823-5854
Retaining Strap

998235854
34021508: RNCC: 3 | RNVC: 2
H68-028-000: RNCC: 5 | RNVC: 2
X9: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-599-0749
Mounting Bracket

995990749
3887/10885: RNCC: 3 | RNVC: 2
C3887/10885: RNCC: 5 | RNVC: 2
3887/10885: RNCC: 5 | RNVC: 9
C3887/10885: RNCC: 5 | RNVC: 9

28 Jan 1998

5340-99-434-2225
Pipe Hanger

994342225
110142-2251: RNCC: 3 | RNVC: 2
26VC-19602: RNCC: 6 | RNVC: 9

13 May 2002

5340-99-333-6179
Mounting Bracket

993336179
825872-00: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-99-881-5348
Slotted Lug

998815348
M54B: RNCC: 3 | RNVC: 2
A1357L47: RNCC: 5 | RNVC: 2
LV6MT13-94649: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-496-0330
Clamp

994960330
821/00526: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-99-359-4657
Turnbuckle

993594657
C05/73884/00: RNCC: 3 | RNVC: 2
73884: RNCC: 5 | RNVC: 2

31 Jan 2008

5340-99-793-3231
Plate

997933231
CAC143C42: RNCC: 3 | RNVC: 2
DAC143A2 ITEM 11: RNCC: 5 | RNVC: 2
DAC143A2/11: RNCC: 5 | RNVC: 2

25 May 2001

5340-99-151-7006
Mounting Plate

991517006
WG1583-0246-101: RNCC: 3 | RNVC: 2
117TD-0020: RNCC: 6 | RNVC: 9

13 Jul 2010

5340-99-004-4902
Mounting Bracket

990044902
049627-000-001: RNCC: 3 | RNVC: 2
TMM: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-99-924-2729
Grooved Clamp Coupling

999242729
EA7105G015-139: RNCC: 3 | RNVC: 2

4 Jun 1999

5340-99-877-7912
Lock Set

998777912
6T4-W4584-00: RNCC: 3 | RNVC: 2
6T4-W4584-00: RNCC: 5 | RNVC: 2
100537: RNCC: 5 | RNVC: 2

30 Jan 1996

5340-99-660-8821
Catch Strike

996608821
S3-SA: RNCC: 3 | RNVC: 2

20 Jun 1994

5340-99-743-6523
Synchro Clamp

997436523
FV 2244410: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-99-131-9225
Collar

991319225
81862874: RNCC: 3 | RNVC: 2

28 May 2004

5340-99-600-7656
Angle Bracket

996007656
S64BWC2157: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-600-0919
Dust And Moisture Seal Protective Cover

996000919
81700047: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-793-2722
Spring Tension Clip

997932722
3747-721: RNCC: 3 | RNVC: 2
B60027: RNCC: 5 | RNVC: 2

13 Nov 1992

5340-99-792-6192
Rigid Castor

997926192
TFH 125 PTRH: RNCC: 3 | RNVC: 2
40BA2956: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-798-0271
Section Block Clamp

997980271
FV 2023574: RNCC: 3 | RNVC: 2
FV 2023574: RNCC: 5 | RNVC: 2

9 Jul 1985

5340-99-743-8083
General Purpose Resilient Mount

997438083
DW970: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-753-5779
Retaining Strap

5340-99-621-2888

5340-99-713-5824

5340-99-752-2217
Butt Hinge

5340-99-633-6672

5340-99-749-3574

5340-99-618-1875
Plastic Bumper

5340-99-742-2392
Rubber Bumper

5340-99-200-2942

5340-99-747-4455
Adaptor

5340-99-643-9967

5340-99-201-3062

5340-99-629-4087
General Purpose Resilient Mount

996294087
9303-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-371-0139
Strap

993710139
0012-2899-40-2: RNCC: 3 | RNVC: 2
0012-2899-40-2: RNCC: 5 | RNVC: 2
0012-2899-40-2: RNCC: 5 | RNVC: 2

13 Sep 1995

5340-99-898-0029
Mounting Plate

998980029
FV2219159: RNCC: 3 | RNVC: 2
FV2219159: RNCC: 5 | RNVC: 2

6 Apr 1999

5340-99-883-3132
Mounting Bracket

998833132
WPG 9742: RNCC: 3 | RNVC: 2
FJ991HM0040: RNCC: 6 | RNVC: 9

16 Sep 1999

5340-99-149-8629
Protection Cover

991498629
AIR128314: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-614-9401
Mounting Bracket

996149401
AM 00 00 53000: RNCC: 3 | RNVC: 2
12076767: RNCC: 5 | RNVC: 2

5 Dec 2005

5340-99-420-8079
Retaining Strap

994208079
5303P: RNCC: 3 | RNVC: 9
Z1ZA51552: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-928-3416
Blank Panel

999283416
40142: RNCC: 3 | RNVC: 2

23 Nov 2007

5340-99-809-1704
Rubber Bumper

998091704
509885: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-834-0313
Mounting Bracket

998340313
FV592476: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-9093
Retaining Strap

998269093
FV.573772: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-826-6441
Loop Clamp

998266441
FV 937425: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-898-6029
Rod End Clevis

998986029
30275-481: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-99-824-2568
Double Angl Bracket

998242568
FV771253: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-3869
Dust And Moisture Seal Boot

998243869
64223025: RNCC: 3 | RNVC: 2
GB32386: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-827-6170
Access Cover

998276170
FV 834290: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-3122
Expansion Plug

998083122
7157925: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-827-6370
Loop Clamp

998276370
FV 834167: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-5243
Helical Compression Spring Retainer

998245243
P963A1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-6434
Line Supporting Strap

998296434
382453S100: RNCC: 3 | RNVC: 2
1825175: RNCC: 5 | RNVC: 2
3933061: RNCC: 5 | RNVC: 2
95875S: RNCC: 5 | RNVC: 2
1825175: RNCC: 5 | RNVC: 9
382453S100: RNCC: 5 | RNVC: 9
3933061: RNCC: 5 | RNVC: 9
95875S: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-834-3965
Mounting Bracket

998343965
MBEU 69586: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-99-780-2888
Strap

997802888
FV930078: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-99-824-1135
Hinge Bracket

998241135
FV685443: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-7710
Eye Hook

998087710
FV113177: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-774-2585
Mounting Bracket

997742585
UG0544260: RNCC: 3 | RNVC: 2

9 Oct 2009

5340-99-779-1293
Mounting Plate

997791293
FV1032040: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-99-801-2134
Hydraulic Va Spring

998012134
1850-786M1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-798-7030
Ex Silencer Bracket

997987030
233 2596: RNCC: 3 | RNVC: 2

22 Jul 1988

5340-99-777-0443
Loop Clamp

997770443
11051072: RNCC: 3 | RNVC: 2
11051072: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-834-8229
Loop Clamp

998348229
FV 2265491: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-99-928-3468
Angle Bracket

999283468
40001281: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-99-896-0125
Angle Bracket

998960125
9689117: RNCC: 3 | RNVC: 2

2 Oct 1996

5340-99-925-0794
Rod Retainer Clip

999250794
LRWAK001W200: RNCC: 3 | RNVC: 2

22 May 2009

5340-99-830-2348
Cupboard Door Knobs

998302348
185-1944: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-99-828-7857
Loop Clamp

998287857
9032139: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-6589
Door Latch Assembly

998286589
L2159B: RNCC: 3 | RNVC: 2
249: RNCC: 5 | RNVC: 1
2230LH: RNCC: 5 | RNVC: 2
R2159NEARS1DEPLA1N: RNCC: 5 | RNVC: 2
9377773: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-6304
Detent Plunger

998296304
FV923940: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-4723
Control Ro Fork End

998294723
568979: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-800-7104
Retaining Strap

998007104
FV2072830: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-5256
Mounting Bracket

998245256
MBCS 348: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-99-824-1350
Expansion Plug

998241350
602152: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-179-5499
Access Cover

991795499
14587892: RNCC: 3 | RNVC: 2
CV186597: RNCC: 5 | RNVC: 2
VOE14587892: RNCC: 5 | RNVC: 2

2 Jun 2011

5340-99-649-8730
Nonmeta Solid Wheel

Load More Results