What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 132 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 132 of 368

5340-99-968-6999
Access Cover

999686999
SSK/01/207/NO. 3 MBT STBD FWD: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-99-254-7832
Butt Hinge

992547832
01/0/20019: RNCC: 3 | RNVC: 2
1806: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-723-1563
Angle Bracket

997231563
W74307/B SHEET 1 REF.1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-865-6960
Access Cover

998656960
FV395711: RNCC: 3 | RNVC: 2
LV9ACRFV395711: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-865-6703
Control Rod Handle

998656703
FV422231: RNCC: 3 | RNVC: 2
LV9ACRFV422231: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-604-1596

5340-99-865-6966
Butt Hinge Leaf

998656966
FV421501: RNCC: 3 | RNVC: 2
LV9ACRFV421501: RNCC: 6 | RNVC: 9

27 Nov 1979

5340-99-660-7764
Mounting Plate

5340-99-657-4603

5340-99-411-8121
Fork End

5340-99-660-5863
Rigid Caster

5340-99-650-2158
Quick Release Pin

5340-99-649-9421

5340-99-729-0304
Rear Housing Cover

5340-99-946-5870

5340-99-152-1500
Rim Latch

991521500
605746: RNCC: 3 | RNVC: 2
69938: RNCC: 5 | RNVC: 2

23 May 2011

5340-99-153-5913
Bracket Assy

991535913
M5725455500000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-631-4172
Access Cover

996314172
017495: RNCC: 3 | RNVC: 2
VA017495: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-517-8955
Manual Control Lever

995178955
7413463: RNCC: 3 | RNVC: 2
925287 3000: RNCC: 5 | RNVC: 2
FL9804W0637: RNCC: 6 | RNVC: 9

6 May 1998

5340-99-374-7506
Mounting Plate

993747506
7111930262: RNCC: 3 | RNVC: 2

23 Jan 2008

5340-99-395-7891
Mechanical Stop

993957891
6F 6B060: RNCC: 3 | RNVC: 2

24 May 1999

5340-99-727-1370
Block Clamp

997271370
SPV 110A PPDA DP AS W5: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-99-642-7183
Loop Clamp

996427183
B57549: RNCC: 3 | RNVC: 2
36BC742: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-723-7311
Strapping

997237311
VARIE TIE 4MM: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-99-304-7197
Access Cover

993047197
12737238: RNCC: 3 | RNVC: 2
CV142309: RNCC: 5 | RNVC: 2

31 May 2012

5340-99-269-0912
Block Clamp

992690912
993101: RNCC: 3 | RNVC: 2
FV991OQ0122: RNCC: 6 | RNVC: 9

6 Jan 2000

5340-99-735-1597
Engine Accessory Bracket

997351597
JJ110495: RNCC: 3 | RNVC: 2
JJ110495: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-722-8577
Manual Control Lever

997228577
NRC1557: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-722-2954
Ladder Bracket

997222954
6930310: RNCC: 3 | RNVC: 2

2 May 1995

5340-99-734-8580
Pipe Clip

997348580
OE2354: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-99-724-0496
Section Block Clamp

997240496
633260: RNCC: 3 | RNVC: 2
SSIPL1: RNCC: 6 | RNVC: 9

22 Oct 2002

5340-99-734-6381
Angle Bracket

997346381
271451003274: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-99-734-1849
Mounting Plate

997341849
POG104275: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-99-153-2475
Mounting Plate

991532475
333/E1877: RNCC: 3 | RNVC: 2

18 Jul 2012

5340-99-631-7716
Support Hook

996317716
Z041DG401852: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-495-9724
Clamp

994959724
0025346: RNCC: 3 | RNVC: 2
CV182551: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-99-301-7360
Mounting Plate

993017360
5741: RNCC: 3 | RNVC: 2

23 Aug 1996

5340-99-746-4372
Screw Thread Insert

997464372
111245-1279: RNCC: 3 | RNVC: 2
111245/1279: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-490-4777
Tie Rod

994904777
NO PRIMARY REF 99-490-4777: RNCC: 3 | RNVC: 2
PC9431: RNCC: 5 | RNVC: 2

4 Feb 2010

5340-99-774-0724
Dust And Moisture Seal Boot

997740724
6265-671A: RNCC: 3 | RNVC: 2
Y6265-671A: RNCC: 5 | RNVC: 2

15 Dec 1984

5340-99-577-4617
Mounting Plate

995774617
335/12136: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-99-345-7480
Mounting Plate

993457480
80031638: RNCC: 3 | RNVC: 2
80031638-02: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-99-500-2077
Mounting Bracket

995002077
WG1382-9320-04301: RNCC: 3 | RNVC: 2
WG1382-9320-043: RNCC: 5 | RNVC: 2

2 Feb 1995

5340-99-308-1363
Mounting Plate

993081363
28218-205: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-99-425-5922
Mortar Spring

994255922
NO PRIMARY REF 99-425-5922: RNCC: 3 | RNVC: 2
UCW19815-28-22: RNCC: 5 | RNVC: 2
88730-703-192: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-227-5699
Spherical End

992275699
EA6713B624-103: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-99-391-0256
Dust And Moisture Seal Protective Cap

993910256
EA2800V336-002: RNCC: 3 | RNVC: 2
EA2800V336: RNCC: 5 | RNVC: 1
HTE460061-002: RNCC: 5 | RNVC: 2
HTE460061-002: RNCC: 6 | RNVC: 9

16 Sep 1993

5340-99-629-2712
Butt Hinge

996292712
WG1316-0003-135: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-300-5194

5340-99-300-5166

5340-99-132-6723
Butt Hinge

5340-99-717-9437

5340-99-762-6564

5340-99-756-3955
Resilient Mount

5340-99-650-1739
Clip

5340-99-140-6067

5340-99-652-2439

5340-99-405-4077

5340-99-649-9345
Electrical-Mec Post

5340-99-255-6959

5340-99-718-4569
Loop Clamp

5340-99-797-6250
Loop Clamp

5340-99-630-1105

5340-99-947-5473

5340-99-639-3395

5340-99-906-7954
Multiple An Bracket

5340-99-808-0476

5340-99-951-6932

5340-99-827-8095

5340-99-830-3362
Rubber Bumper

5340-99-327-3855
Corrosion Preventive Anode

993273855
157.5ZH: RNCC: 3 | RNVC: 2
M/442/00/0001/007 PART 208: RNCC: 5 | RNVC: 1
8311: RNCC: 5 | RNVC: 2
001279597/007 PART 208: RNCC: 5 | RNVC: 2
137.5ZH: RNCC: 5 | RNVC: 2
SSK/M/442/00/0001/007 PART 208: RNCC: 5 | RNVC: 2
137.5ZH: RNCC: 5 | RNVC: 2
E/1391/1: RNCC: 5 | RNVC: 2

20 Aug 1992

5340-99-321-5763
Pipe Hanger

993215763
EA208-003: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-99-943-1707
Internal Thr Spacer

999431707
P190357-0A: RNCC: 3 | RNVC: 2

24 Apr 1989

5340-99-476-6532
General Purpose Resilient Mount

994766532
48040227: RNCC: 3 | RNVC: 2
2500601015: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-99-332-4043
P Handrail Assembly

993324043
MDA0995: RNCC: 3 | RNVC: 2

31 Mar 2004

5340-99-853-8409
Access Cover

998538409
PS1228: RNCC: 3 | RNVC: 2
CV199971: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-99-657-5724
Spacing Threaded Standoff

996575724
35-82730: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-99-881-2366
Catch Strike

998812366
250087: RNCC: 3 | RNVC: 2
S513: RNCC: 5 | RNVC: 9
6MT13-94242: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-866-9119
Manual Control Lever

998669119
FV471366: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-856-3596
Clamp

998563596
42208469: RNCC: 3 | RNVC: 2

16 Dec 1999

5340-99-644-8863
Access Cover

996448863
CV60845: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-465-8514
Padlock

994658514
29G2062: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-862-0914
Helical Compression Spring Seat

998620914
509506: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-465-8507
Lock

994658507
29G1017: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-661-5662
Hinge Bracket

5340-99-700-1112

5340-99-887-6720

5340-99-887-3379
Rubber Bumper

5340-99-968-1725
Mounting Plate

5340-99-860-5363
Multiple An Bracket

5340-99-732-6163

5340-99-688-1483
Mounting Bracket

996881483
QB19372: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-99-732-5536

5340-99-771-9936

5340-99-745-4837

5340-99-724-4319
Electrical-Mec Post

5340-99-113-3553

5340-99-126-1264
Mounting Plate

5340-99-114-1847
Resilient Mount

5340-99-112-6483

5340-99-096-2108
Electrical-Mec Post

5340-99-724-4927
Clamping Catch

5340-99-660-3933
Webbing Strap

996603933
AC/14/2/1017: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-99-754-5231
Adjuster Boss

997545231
P-721076-297: RNCC: 3 | RNVC: 2
P721076-297: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-667-8588
Bow Handle

996678588
25310-21: RNCC: 3 | RNVC: 2
R11Z004A ITEM 8: RNCC: 5 | RNVC: 2
R11Z004A/8: RNCC: 5 | RNVC: 2

8 Feb 2011

5340-99-215-4507
Loop Clamp

992154507
999/7/32437/000: RNCC: 3 | RNVC: 2
RSGU 1-19/20-1: RNCC: 5 | RNVC: 1

16 May 1994

5340-99-795-4964
Extension Handle

997954964
JMP/FOAM/4166/4: RNCC: 3 | RNVC: 2

14 May 2008

5340-99-573-7644
Retaining Clip

995737644
MZH 1636: RNCC: 3 | RNVC: 2
FJ980K8: RNCC: 6 | RNVC: 9

17 Nov 1997

5340-99-425-9252
Bracket Assy

994259252
M5725529900000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-626-1437
Electrical-Mec Post

996261437
057865: RNCC: 3 | RNVC: 2
B057865: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-192-9508
Retaining Strap

991929508
034896: RNCC: 3 | RNVC: 2
034896: RNCC: 3 | RNVC: 9
B034896: RNCC: 5 | RNVC: 2
B034896: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-946-5055

5340-99-687-2046
Deflector

996872046
OD20845: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-99-052-0596
Boss

990520596
AS67015: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-99-950-2255
Block Clamp

999502255
MX/00087/AL/082: RNCC: 3 | RNVC: 2
004470103: RNCC: 5 | RNVC: 2

5 Aug 1993

5340-99-553-4091
Bow Handle

995534091
32800-204: RNCC: 3 | RNVC: 2

8 Aug 2011

5340-99-551-3164
Bulb Housing

995513164
800-01-01-903: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-99-615-3501
Retaining Strap

996153501
KB290K0032-032: RNCC: 3 | RNVC: 2
KB290K0032-032: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-361-4507
Spacing Threaded Standoff

993614507
FV 2112077: RNCC: 3 | RNVC: 2
FV 2112077: RNCC: 5 | RNVC: 2

5 Feb 1991

5340-99-951-8571
Housing

5340-99-951-9179

5340-99-440-6010
Roller Bracket

994406010
NO PRIMARY REF 99-440-6010: RNCC: 3 | RNVC: 2
16-62055E: RNCC: 5 | RNVC: 2
0611-102502: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-400-2662
Access Cover

994002662
NO PRIMARY REF 99-400-2662: RNCC: 3 | RNVC: 2
322-4334-4: RNCC: 5 | RNVC: 2

24 Aug 2012

5340-99-881-8736
Spares Kit

998818736
NO PRIMARY REF 99-881-8736: RNCC: 3 | RNVC: 2
DILSL8/25.1.2: RNCC: 5 | RNVC: 2
DILSL8/25.1.2: RNCC: 5 | RNVC: 9

19 Nov 2010

5340-99-611-1498
Nonmetallic Bushing

996111498
13715H45: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-866-6912
Access Cover

998666912
FV524767: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-866-5522
Webbing Strap

998665522
FV 970135: RNCC: 3 | RNVC: 2
PCL 6267: RNCC: 5 | RNVC: 2
FV 970135: RNCC: 5 | RNVC: 2
9921W0016: RNCC: 6 | RNVC: 9

21 Oct 1999

5340-99-866-8041
Bumper

998668041
FV396546: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-853-6632
Loop Clamp

998536632
108478: RNCC: 3 | RNVC: 2
108478: RNCC: 5 | RNVC: 2

13 Dec 1993

5340-99-877-1740
Mounting Bracket

998771740
LOT84105: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-99-858-9182
Spacing Threaded Standoff

998589182
A2N25669249: RNCC: 3 | RNVC: 2
25669249: RNCC: 5 | RNVC: 2

3 Sep 2008

5340-99-856-4049
Stop

998564049
1456R445: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-99-865-3682
Access Cover

998653682
FV149200: RNCC: 3 | RNVC: 2
LV10FV149200: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-424-5967
Access Cover

994245967
B209312: RNCC: 3 | RNVC: 2
B209312: RNCC: 5 | RNVC: 9
26FX8836: RNCC: 6 | RNVC: 9
26FX8836: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-256-3243
Spring Tension Clip

992563243
AC/12/11/1008: RNCC: 3 | RNVC: 2
MM8558: RNCC: 5 | RNVC: 2

27 Aug 1992

5340-99-774-7168
Hook

997747168
51L7-1AC: RNCC: 3 | RNVC: 2
A910525/008: RNCC: 5 | RNVC: 2
910525/008: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-083-3470
Mounting Bracket

990833470
35-00906-000: RNCC: 3 | RNVC: 2
35-00906: RNCC: 5 | RNVC: 1
FJ9512A7100: RNCC: 6 | RNVC: 9

9 Oct 1995

5340-99-796-3314
Nut

997963314
400768-11: RNCC: 3 | RNVC: 2
400768-011: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-588-0774
Blanking Cap

995880774
31-066000-30: RNCC: 3 | RNVC: 2
MS740: RNCC: 5 | RNVC: 2

5 Jan 2007

5340-99-316-3811
Clamping Catch

993163811
GWLBL-CH-152: RNCC: 3 | RNVC: 2
CH-152: RNCC: 6 | RNVC: 9
FL963LY0127: RNCC: 6 | RNVC: 9

6 Jan 1997

5340-99-302-2166
Thumbwhee Parts Kit

993022166
A722-01-765: RNCC: 3 | RNVC: 2
722-01-765: RNCC: 5 | RNVC: 2
FH9802S0027: RNCC: 6 | RNVC: 9

15 Apr 1998

5340-99-931-7804
Webbing Strap

999317804
00-1110-5106: RNCC: 3 | RNVC: 2
NP930100: RNCC: 5 | RNVC: 2
00-1110-7941: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-238-2021
Mounting Plate

992382021
EA5352D536-043: RNCC: 3 | RNVC: 2

17 Oct 2008

5340-99-834-0703
Anti-Vi Fitting Set

998340703
8220-0021C: RNCC: 3 | RNVC: 2
8220-21C: RNCC: 5 | RNVC: 2
032PM-066: RNCC: 6 | RNVC: 9

30 Jul 2003

5340-99-715-2639
Nut And Bolt Retainer

997152639
17106-287X: RNCC: 3 | RNVC: 2
Z17106-287X: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-143-0648
Loop Clamp

991430648
WB2571-35: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-507-3588
Mounting Bracket

995073588
420-450-026: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-99-190-7106
Helical Compression Spring Retainer

991907106
114312620: RNCC: 3 | RNVC: 2

19 May 2003

5340-99-427-6245
Retaining Strap

994276245
FV1044281: RNCC: 3 | RNVC: 2

13 May 1992

5340-99-836-7109

5340-99-793-9333

5340-99-815-3225

5340-99-797-2698
Rubber Bumper

5340-99-789-1931

5340-99-789-0027
Resilient Mount

5340-99-790-7066
Mounting Plate

5340-99-821-7098

5340-99-790-7115
Dus Protective Plug

5340-99-835-6464
Webbing Strap

5340-99-836-7148

5340-99-819-7513

5340-99-301-4033
Pillar

993014033
NP8.0-076.0-C: RNCC: 3 | RNVC: 2
FF9526T0477: RNCC: 6 | RNVC: 9

14 Jul 1995

5340-99-664-9220
Loop Clamp

996649220
BAS238-1-680: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-549-4833
Angle Bracket

995494833
WG1381-0825-104: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-99-133-7746
Access Cover

991337746
SEV50S/30: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-99-667-6700
Mounting Plate

996676700
WG1583-0269-101: RNCC: 3 | RNVC: 2
11894-014: RNCC: 6 | RNVC: 9

13 Jul 2010

5340-99-331-8572
Mounting Bracket

993318572
EU5310B503-041: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-99-695-2989
Section Block Clamp

996952989
110045SHT371: RNCC: 3 | RNVC: 2
26VC-12394: RNCC: 6 | RNVC: 9

8 Mar 2002

5340-99-333-1587
Mechanic Equipment Hardware Kit

993331587
57570-1: RNCC: 3 | RNVC: 2

8 Sep 2003

5340-99-710-1437
Nut Plate Retaining

997101437
NM76885-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-490-4002
Rod End Clevis

994904002
6-4.CF.3309: RNCC: 3 | RNVC: 2
26DL10214: RNCC: 6 | RNVC: 9

24 Apr 2002

5340-99-995-5762
Webbing Strap

999955762
1300-3038-C: RNCC: 3 | RNVC: 2

18 Nov 2011

5340-99-960-1592
Rim Latch

999601592
3-8446: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-871-6830
Mounting Bracket

998716830
1102P-A FB: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-99-900-7788
Rubber Bumper

999007788
P1182: RNCC: 3 | RNVC: 2
3055-4-52C: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-609-5204
Du Protective Cover

5340-99-610-0954
Access Cover

5340-99-610-7925
Dust Protective Cap

5340-99-866-6011
Angle Bracket

998666011
FV556557: RNCC: 3 | RNVC: 2

25 Aug 1978

5340-99-862-3427
Bow Handle

998623427
ASE03536: RNCC: 3 | RNVC: 2

10 Apr 2012

5340-99-863-7532
Extension Drawer Slide Section

998637532
NSYDPR80: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-99-835-2177

5340-99-824-8983
Rod End Clevis

5340-99-721-5065
Exte Locking Handle

997215065
120-93000: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-107-2176

5340-99-107-2700

5340-99-872-9125
Dirt And Liquid Deflector

998729125
RS52606: RNCC: 3 | RNVC: 2
7776366: RNCC: 5 | RNVC: 2

14 Apr 1997

5340-99-125-8342
Dust And Moisture Seal Protective Cap

991258342
77855921: RNCC: 3 | RNVC: 2
77856079: RNCC: 5 | RNVC: 9

16 Sep 1999

5340-99-871-5805
Webbing Strap

998715805
17370: RNCC: 3 | RNVC: 2
FS990DZ0011: RNCC: 6 | RNVC: 9

18 Mar 1999

5340-99-873-8012
Nut And Bolt Locking Plate

998738012
534098: RNCC: 3 | RNVC: 2
LV7RU534098: RNCC: 6 | RNVC: 9
61RV10588: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-870-2527
Ramp Bridge Plate

998702527
BH5130/S: RNCC: 3 | RNVC: 2
AMR-23-04-2008-B-BRIDGEPLATE: RNCC: 5 | RNVC: 2

28 Mar 2013

5340-99-126-6158
Butt Hinge Leaf

991266158
P-250261-008: RNCC: 3 | RNVC: 2
P250261-008: RNCC: 5 | RNVC: 2

18 Dec 1997

5340-99-122-2927
Braided Rubber Hook

991222927
SP73-C: RNCC: 2 | RNVC: 2
SP73C: RNCC: 5 | RNVC: 2
C: RNCC: 6 | RNVC: 9
SP73: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-810-7788
Nut And Bolt Locking Plate

998107788
5880230: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-780-4518
Retaining Cap

997804518
AC043380: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-99-826-9677
Nut And Bolt Locking Plate

998269677
FV963728: RNCC: 3 | RNVC: 2

17 Dec 1980

5340-99-781-5304
Electrical-Mec Post

997815304
HSL.4070.20: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-810-5771
Retaning Cap

998105771
AL54017570: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-99-867-9498
Handle Grip

998679498
HG547: RNCC: 3 | RNVC: 2
HAN0021: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-99-830-0795
Angle Bracket

998300795
FV932202: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-811-5607
Bracket Sub Assy

998115607
MBEU118634: RNCC: 3 | RNVC: 2

18 Dec 2004

5340-99-862-8327
Quick Release Pin

998628327
MBEU69465: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-99-843-7947
Access Cover

998437947
30R887: RNCC: 3 | RNVC: 2
LV7SL30R887: RNCC: 6 | RNVC: 9

1 Mar 1977

5340-99-811-4867
Angle Bracket

998114867
31343T: RNCC: 3 | RNVC: 2
LV1VSM31343T: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-858-2545
Bracket

998582545
M5725797220000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-145-9738
Rod End Clevis

991459738
FV2116250: RNCC: 3 | RNVC: 2
FV 2172367: RNCC: 5 | RNVC: 2
FV 2172367: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-850-1898

5340-99-849-9962

5340-99-849-0585

5340-99-848-9159
Mounting Plate

5340-99-849-0762

5340-99-535-8549
Angle Bracket

995358549
AX63896: RNCC: 3 | RNVC: 2
002OO-082: RNCC: 6 | RNVC: 9

16 Jan 2001

5340-99-271-6775
Mounting Plate

992716775
BD788977: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-99-321-2667
Lock Tab

993212667
ENN51275: RNCC: 3 | RNVC: 2
FV991OQ0085: RNCC: 6 | RNVC: 9

5 Oct 1999

5340-99-628-4833
Angle Bracket

996284833
110003-23499: RNCC: 3 | RNVC: 2
110003: RNCC: 5 | RNVC: 1
XP98PI01053: RNCC: 6 | RNVC: 9

16 Mar 1999

5340-99-243-2288
Barrel Bolt

992432288
AA-2360-032: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-99-551-1995
Rod End Clevis

995511995
EU5342C555-105: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-418-6715
Screw Thread Insert

994186715
AS6317-27: RNCC: 2 | RNVC: 2
AS6317-27: RNCC: 3 | RNVC: 2
B43232: RNCC: 5 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9
28N17439: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-679-8039
Angle Bracket

996798039
MZK3961: RNCC: 3 | RNVC: 2
021LO-004: RNCC: 6 | RNVC: 9

27 May 2002

5340-99-200-3750
Rod End Clevis

992003750
495-54: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-421-9484
Latch Assembly

994219484
CC-170043-1: RNCC: 3 | RNVC: 2

30 Oct 2003

5340-99-411-2655

5340-99-836-1432

5340-99-826-7457
Access Cover

5340-99-823-8032

5340-99-835-2211

5340-99-830-4208

5340-99-610-4445
Mounting Plate

5340-99-617-6667

5340-99-617-6755

5340-99-601-8932
Manual Control Lever

996018932
FV1024574: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-99-215-5275
Loop Clamp

992155275
338NM57269A: RNCC: 3 | RNVC: 2
NM57269A: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-99-666-8767
Double Angle Bracket

996668767
316-28 ITEM 1: RNCC: 3 | RNVC: 2
316-20B ITEM 32: RNCC: 5 | RNVC: 2
316-20B/32: RNCC: 5 | RNVC: 2
316-28/1: RNCC: 5 | RNVC: 2

23 May 2007

5340-99-730-1448
Retaining Strap

997301448
001283293: RNCC: 3 | RNVC: 2
Y/546/20/M003/102: RNCC: 5 | RNVC: 1
SSK/Y/546/20/M003/102: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-833-2815
Access Cover

998332815
78459/7: RNCC: 3 | RNVC: 2
RL/78459/7: RNCC: 5 | RNVC: 2
A2/RL/78459/7: RNCC: 5 | RNVC: 2

9 Sep 2002

5340-99-783-7977
Dust And Moisture Seal Protective Plug

997837977
14/Y/265/0091/A001/230: RNCC: 3 | RNVC: 2
Y/265/0091/A001/230: RNCC: 5 | RNVC: 1
158/215/230: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-874-0239
Clip

998740239
531394: RNCC: 3 | RNVC: 2
LV7RU531394: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-783-1085
Electrical-Mec Post

997831085
1750-387: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-850-0870
Mounting Bracket

998500870
239710: RNCC: 3 | RNVC: 2
GEX7523: RNCC: 5 | RNVC: 2
239710: RNCC: 5 | RNVC: 2
239710: RNCC: 5 | RNVC: 2
LV7RU239710: RNCC: 6 | RNVC: 9
61RV40363: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-794-4980
Retaining Strap

997944980
5653A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-930-8104
Mounting Bracket

999308104
110679-477ND: RNCC: 3 | RNVC: 2
XP98PA01140: RNCC: 6 | RNVC: 9

19 Jan 1998

5340-99-701-1634
Corrosion Preventive Anode

997011634
DS179: RNCC: 3 | RNVC: 2

4 Sep 2008

5340-99-794-9095
Swivel Castor

997949095
100547-3108 ASY: RNCC: 3 | RNVC: 2
WSK233: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-850-0510
Loop Clamp

998500510
214228: RNCC: 3 | RNVC: 2
214228: RNCC: 5 | RNVC: 2
LV7RU214228: RNCC: 6 | RNVC: 9
61RV10274: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-796-7484
Access Cover

997967484
594320: RNCC: 3 | RNVC: 2
594320: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-99-969-1689
Handwheel

999691689
LF1149-254F: RNCC: 3 | RNVC: 2
LF1149: RNCC: 5 | RNVC: 1
LF1149-254: RNCC: 5 | RNVC: 1

26 Feb 1992

5340-99-969-6242
Stop

999696242
332/C7403: RNCC: 3 | RNVC: 2
23/55477: RNCC: 6 | RNVC: 9

10 Oct 2011

5340-99-950-3273
Access Cover

999503273
RL201/59: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-99-894-0047
Diaphragm

998940047
110016-3671: RNCC: 3 | RNVC: 2
110016: RNCC: 5 | RNVC: 1
XP98PI01054: RNCC: 6 | RNVC: 9

11 Mar 1999

5340-99-832-8471
Mounting Bracket

998328471
ER9410A003-041: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-99-147-9907
Block Fairlead

991479907
EA5300V031-007: RNCC: 3 | RNVC: 2

10 Mar 2007

5340-99-167-4886
Handle Assembly

991674886
NO PRIMARY REF 99-167-4886: RNCC: 3 | RNVC: 2
AEROTEC14121: RNCC: 5 | RNVC: 2
26VC-19504: RNCC: 6 | RNVC: 9

22 Feb 2002

5340-99-009-7536
Galley Door Slide

990097536
SS115-991-17: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-398-0885
Dus Protective Plug

993980885
NO PRIMARY REF 99-398-0885: RNCC: 3 | RNVC: 2
9543: RNCC: 5 | RNVC: 2

13 Dec 1996

5340-99-435-1473
Door Stay

994351473
B693-A0001: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-99-101-5461
Comp Helical Spring

991015461
757927X1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-830-8779
Angle Bracket

998308779
FV 2036002: RNCC: 3 | RNVC: 2
FV 2036002: RNCC: 5 | RNVC: 2

6 Sep 1991

5340-99-826-6224
Retaining Strap

998266224
FV856366: RNCC: 3 | RNVC: 2
FV856366: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-829-4633
Pipe Clip

998294633
91028921: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-829-5848
Striker Assembly

998295848
7977598: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-824-9939
Mounting Plate

998249939
FV771856: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-0283
Retaining Strap

998280283
FV 834768: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-5406
Section Block Clamp

998285406
W172411: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-828-2777
Access Cover

998282777
FV793886: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-216-3589
Clamping Catch

992163589
36A0191: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-99-449-8154

5340-99-437-4770

5340-99-448-9444
Electrical Co Cover

5340-99-448-8393
Wire Lock Ring

5340-99-600-7545
Loop Clamp

996007545
T17: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-2512
Mounting Plate

997862512
604/1/14759: RNCC: 3 | RNVC: 2

25 May 1993

5340-99-609-6773
Rod End Clevis

996096773
868-950: RNCC: 3 | RNVC: 2
A1-868-950: RNCC: 5 | RNVC: 2
A1-868-950: RNCC: 5 | RNVC: 9
868-950: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-153-3013
Bow Handle

991533013
OE-B-14224: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-99-948-9014
Screwed Spacer

999489014
NO PRIMARY REF 99-948-9014: RNCC: 3 | RNVC: 2
17-61036: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-99-537-0204
Mounting Bracket

995370204
WU5332B008-041: RNCC: 3 | RNVC: 2
1MEV4VX: RNCC: 6 | RNVC: 9

12 Aug 1999

5340-99-386-7619
Kit

993867619
G003 806812: RNCC: 3 | RNVC: 2
393989-1028: RNCC: 5 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
G003 806812: RNCC: 6 | RNVC: 9

12 Nov 1996

5340-99-909-6512
Bow Handle

999096512
0080/002: RNCC: 3 | RNVC: 2
40001389: RNCC: 5 | RNVC: 2

17 Feb 2011

5340-99-705-2886
Spacing Threaded Standoff

997052886
3513-610-5191: RNCC: 3 | RNVC: 2

9 Jan 2006

5340-99-601-3227
Grooved Clamp Coupling

996013227
DE25789: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-139-9928
Rod End Clevis

991399928
01TL11303: RNCC: 3 | RNVC: 2
01TL11303: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-215-6358
Mounting Bracket

992156358
MWC 9313: RNCC: 3 | RNVC: 2
FJ9615L1234: RNCC: 6 | RNVC: 9
(241)AE095MWC 9313: RNCC: 8 | RNVC: 2
MWC 9313: RNCC: 8 | RNVC: 2

31 Jul 1996

5340-99-410-4670
Bracket Assy

994104670
M2825033900100: RNCC: 3 | RNVC: 2

23 May 2012

5340-99-132-1493
Mounting Bracket

5340-99-500-7240
Bolt Guide

5340-99-802-1828

5340-99-551-4431
Double Angle Bracket

995514431
FV2249912: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-99-795-9454
Electrical-Mec Post

5340-99-741-8819
Section Block Clamp

997418819
14881224: RNCC: 3 | RNVC: 2
CV186043: RNCC: 5 | RNVC: 2
VOE14881224: RNCC: 5 | RNVC: 2

22 Jun 2011

5340-99-822-3924
Rubber Bumper

5340-99-603-6105
Retaining Strap

996036105
F267016: RNCC: 3 | RNVC: 2
F267016: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-734-1402
Screw Thread Insert

997341402
IR0170082: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-601-8736
Angle Bracket

996018736
DT14898: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-99-603-7605
Section Block Clamp

996037605
F242967: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-423-4607
Adjuster Spring

994234607
NO PRIMARY REF 99-423-4607: RNCC: 3 | RNVC: 2
POST13-0331: RNCC: 5 | RNVC: 2
558526: RNCC: 6 | RNVC: 9

22 Jun 1979

5340-99-734-3977
Mounting Pad

997343977
PAD/001/4-20: RNCC: 3 | RNVC: 2
989009941: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-756-5160
Door Handle

997565160
SSN07/M/148/40/1/25: RNCC: 3 | RNVC: 2
M/148/40/1/25: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-352-4106
Vent Plug

993524106
11/454/3/18/5027: RNCC: 3 | RNVC: 2
WE111B2: RNCC: 6 | RNVC: 9

19 Jun 1997

5340-99-736-6242
Screw Thread Insert

997366242
AS4951- 5: RNCC: 3 | RNVC: 1
AS4951-5: RNCC: 3 | RNVC: 2
FV2026129: RNCC: 5 | RNVC: 2
FV2026129: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-824-6540
Stowage Lashing Eye

998246540
FV122284: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-3110
Loop Clamp

998383110
7212116: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-839-2987
Bracket Assy

998392987
M5725053400100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-851-7335
Rubber Boot Protect

998517335
2003434: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-99-820-0263
Mtg Plt

998200263
M5725152100000: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-99-850-1669
Rubber Bumper

998501669
332647: RNCC: 3 | RNVC: 2
61RV50306: RNCC: 6 | RNVC: 9
LV7RU332647: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-820-2509
Internally Rod End

998202509
FV691593: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-6679
Mounting Plate

998386679
110653-231: RNCC: 3 | RNVC: 2
26VC16658: RNCC: 6 | RNVC: 9

17 Jan 2002

5340-99-838-5698
Mounting Bracket

998385698
FV950930: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-7593
Pipe Hanger

998387593
FV2264252: RNCC: 3 | RNVC: 2
ID2413: RNCC: 6 | RNVC: 9

26 Oct 2004

5340-99-820-4791
Access Cover

998204791
FV713396: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-850-3002
Rod End Clevis

998503002
FV2324946: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-99-838-1985
Angle Bracket

998381985
NAK3139: RNCC: 3 | RNVC: 2
AENA159: RNCC: 5 | RNVC: 2
FJ9804G0001: RNCC: 6 | RNVC: 9

15 Apr 1998

5340-99-838-5127
Retaining Strap

998385127
FV937854: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-2714
Shi Retaining Block

998382714
FV813596: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-838-5128
Loop Clamp

998385128
FV937853: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-881-2002
Spring Tension Clip

998812002
1180: RNCC: 3 | RNVC: 2
LV6MT4FTP1180: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-881-2005
Spring Tension Clip

998812005
1813: RNCC: 3 | RNVC: 2
LV6MT4FTP1813: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-206-4522
Loop Clamp

992064522
MEXE18590: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-422-9104
Services Box

994229104
FV 2126022: RNCC: 3 | RNVC: 2
FV 2126022: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-99-679-9183
Bracket

996799183
M5755231720000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-544-6831
Clamping Catch

995446831
C4626: RNCC: 3 | RNVC: 2
C4626: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-994-9310
Switch Barrier

999949310
A15183: RNCC: 3 | RNVC: 2

3 Jan 1992

5340-99-982-0174
Mounting Bracket

999820174
MBEU82568: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-99-983-9879
Electrical-Mec Post

999839879
07A 0053: RNCC: 3 | RNVC: 2

26 May 1998

5340-99-316-0254
Retaining Strap

993160254
AMP 02 08 32002: RNCC: 3 | RNVC: 2

25 Jul 2012

5340-99-220-9023
Compression Cup

992209023
BTE1205: RNCC: 3 | RNVC: 2
GATANCP: RNCC: 5 | RNVC: 1
6C2209023: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-051-7493
Mounting Bracket

990517493
NTC1201: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-99-411-8558
Loop Clamp

994118558
11883Y002: RNCC: 3 | RNVC: 2
27Q17901: RNCC: 6 | RNVC: 9

29 Jan 1990

5340-99-133-6919
Swivel Caster

991336919
GGS/H100/40BJ: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-99-476-6432
Mounting Plate

994766432
NB-73-033: RNCC: 3 | RNVC: 2
1078F-001: RNCC: 6 | RNVC: 9

9 Dec 2010

5340-99-825-2225

5340-99-275-5111
Spacing Threaded Standoff

992755111
60401-036: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-99-839-0017
Retainer

998390017
E860215S81: RNCC: 3 | RNVC: 2
E860215: RNCC: 5 | RNVC: 1

26 May 1999

5340-99-317-6373
Fitting

993176373
69302105: RNCC: 3 | RNVC: 2
FF962UP0026: RNCC: 6 | RNVC: 9

25 Sep 1996

5340-99-405-4494
Rod End Clevis

994054494
ZJEF003936LOK-ITEM-275: RNCC: 3 | RNVC: 2
ZJEF003936LOK-275: RNCC: 5 | RNVC: 2

18 Mar 2004

5340-99-748-2541
Permanent Magnet

997482541
812/RRA: RNCC: 3 | RNVC: 2
812: RNCC: 5 | RNVC: 1

13 Nov 1997

5340-99-131-2931
Retaining Clip

991312931
826/01320: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-99-554-3926
Handwheel

995543926
5CS1TEM5: RNCC: 3 | RNVC: 1
SSN04-5CS1TEM5: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-494-2111
Retaining Strap

994942111
1142-01260: RNCC: 3 | RNVC: 2
SA1142-01260: RNCC: 5 | RNVC: 2
CV186197: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-99-614-1659
Retaining Strap

996141659
WG1381-0329-175: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-500-3052
Fairlead Plate

995003052
ER2521B178-107: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-99-320-4921
Angle Bracket

993204921
08-00908-001: RNCC: 3 | RNVC: 2
9512A807A: RNCC: 6 | RNVC: 9

30 Apr 1996

5340-99-127-8113
Screw Thread Insert

991278113
514CNX13-321N: RNCC: 3 | RNVC: 2
DEFSTAN53-82: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-799-3335
Electrical-Mec Post

5340-99-834-9136
Loop Clamp

5340-99-500-5086
Mending Plate

995005086
RRC8707: RNCC: 3 | RNVC: 2
FJ9615L1224: RNCC: 6 | RNVC: 9

31 Jul 1996

5340-99-600-1830
Spring Tension Clip

996001830
PEC6727: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-1944
Sliding Leg

991531944
52998: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-99-437-0368
Handgrip Assembly

994370368
00-1108-5148: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-99-111-6637

5340-99-554-8365
General Purpose Resilient Mount

995548365
3209A40-1: RNCC: 3 | RNVC: 2
3209: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-430-1238
Retaining Strap

994301238
9068: RNCC: 3 | RNVC: 2
9068: RNCC: 5 | RNVC: 9
36DE3573: RNCC: 6 | RNVC: 9
36DE3573: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-127-3725
Track Assembly

991273725
3020204000466: RNCC: 3 | RNVC: 2
0129C-044: RNCC: 6 | RNVC: 9
0126Z0008: RNCC: 6 | RNVC: 9

27 Aug 2001

5340-99-501-0418
Mounting Plate

995010418
CH12195: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-99-508-2802
Mounting Plate

995082802
110142-36433: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-99-743-7449
Loop Clamp

5340-99-797-7625
Angle Guide

5340-99-808-1014

5340-99-797-6147
Butt Hinge

5340-99-951-0002
Spring Tension Clip