What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 110 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 110 of 368

5340-99-839-4137
Rim Lock

998394137
27 14510 23048: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-839-6398
Mounting Bracket

998396398
PE22358: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-99-843-8095
Rear Door And Inboa

998438095
94068: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-99-842-1706
Mounting Bracket

998421706
KL1590: RNCC: 3 | RNVC: 2

8 Mar 1996

5340-99-285-4079
Rim Lock

992854079
0891/001: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-99-880-0035
Cane Bolt

998800035
RUBB/NV/283: RNCC: 3 | RNVC: 2
40311 DROP BOLT HOUSING: RNCC: 5 | RNVC: 1
99PH01-529: RNCC: 6 | RNVC: 9

26 Aug 1999

5340-99-488-7826
Mounting Bracket

994887826
09-11-07: RNCC: 3 | RNVC: 2
13226E0134: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-99-100-1164
Lock Key

991001164
FV11-25: RNCC: 3 | RNVC: 1
Z3ZC33014: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-977-7267
Dust And Moisture Seal Protective Plug

999777267
AS41913-28G: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-944-9043
Webbing Strap

999449043
01152-2-01414-OL0.8M-FL0.25M-TS-: RNCC: 3 | RNVC: 1
AC/12/15/2202: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-99-805-7758
Angle Bracket

998057758
FL19054: RNCC: 3 | RNVC: 2
ROF(N)17563/35: RNCC: 5 | RNVC: 2
WOL0062-03: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-418-9431
Retaining Strap

994189431
SDA125977: RNCC: 3 | RNVC: 2
SDA125977: RNCC: 5 | RNVC: 9
Z1ZA47026: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-652-7609
Hinge Bracket

5340-99-392-7173
Mounting Plate

993927173
6601310: RNCC: 3 | RNVC: 2

25 May 2012

5340-99-190-7262
Angle Bracket

991907262
FV2266223: RNCC: 3 | RNVC: 2

9 May 2007

5340-99-719-1703
Grooved Clamp Coupling

997191703
62990410790470: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-384-0924
Strap Fastener Loop

993840924
40006062: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-99-666-7510
Mounting Plate

996667510
FV2227967: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-99-192-6993
Container Adaptor

991926993
043287: RNCC: 3 | RNVC: 2
VA043287: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-467-3760
Loop Clamp

994673760
46SS3264: RNCC: 3 | RNVC: 2
26TA14862: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-151-6250
Mounting Bracket

991516250
ACC 31134: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-99-663-3936
Angle Bracket

996633936
FV 2218830: RNCC: 3 | RNVC: 2
FV 2218830: RNCC: 5 | RNVC: 2
FG963FS0002: RNCC: 6 | RNVC: 9

11 Jun 1996

5340-99-563-5122
Mounting Bracket

995635122
043627: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-700-0397
Loop Clamp

997000397
B134627: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-306-3004
Clamping Tr Bracket

993063004
9537: RNCC: 3 | RNVC: 2

15 Aug 1995

5340-99-410-4758
Bracket

994104758
M2815019420000: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-99-651-1414
Cap

996511414
A70150: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-162-2464
Pivot Clamp

991622464
00-1127-1128: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-99-940-5403
Mounting Bracket

999405403
MZH1745: RNCC: 3 | RNVC: 2

28 Apr 1994

5340-99-894-8793
Webbing Strap

998948793
071.126.78: RNCC: 3 | RNVC: 2
WE128A: RNCC: 6 | RNVC: 9

9 Dec 1997

5340-99-843-3569
Mounting Plate

998433569
POG116491: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-99-911-2114
Locking System

999112114
99.999: RNCC: 3 | RNVC: 2
99.999: RNCC: 5 | RNVC: 2

23 Apr 2004

5340-99-883-3407
Bumper

998833407
071392: RNCC: 3 | RNVC: 2

21 Feb 2009

5340-99-860-4075
Engine Accessory Bracket

998604075
FV 2252484: RNCC: 3 | RNVC: 2
FV 2252484: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-99-842-1458
Sub Ass Lock Handle

998421458
FV2159364: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-99-862-0438
Mounting Bracket

998620438
CV7942: RNCC: 3 | RNVC: 2

27 Apr 1981

5340-99-253-1255
Access Cover

992531255
ERC 9199: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-008-1339
Strap

990081339
9811532: RNCC: 3 | RNVC: 2
9811532: RNCC: 5 | RNVC: 2
FL980CM0334: RNCC: 6 | RNVC: 9

23 Jul 1998

5340-99-205-0935
Spring Tension Clip

992050935
1018606: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-999-4081
Mounting Plate

999994081
CP126463: RNCC: 3 | RNVC: 2
WTA149130: RNCC: 5 | RNVC: 2
10XAE84: RNCC: 6 | RNVC: 9

5340-99-101-5471
Angle Bracket

991015471
RU22233: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-440-3840
Mounting Bracket

994403840
ERC3892: RNCC: 3 | RNVC: 2
ERC3892LH: RNCC: 5 | RNVC: 2

1 Sep 1993

5340-99-201-0763
Retaining Strap

992010763
FV 486173: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-970-3665
Spring Tension Clip

999703665
LS100-14: RNCC: 3 | RNVC: 1
100 3-4: RNCC: 5 | RNVC: 1
Y26865251TEM14: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-133-6694
Shear Ring

991336694
JCB-20-5: RNCC: 3 | RNVC: 2
006523512: RNCC: 5 | RNVC: 2
006523512: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-99-519-5198
Dust And Moisture Seal Boot

995195198
100A400381: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-430-1432
Retaining Strap

994301432
8455: RNCC: 3 | RNVC: 2
8455: RNCC: 5 | RNVC: 9
36DE3621: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-660-3201
Retaining Strap

996603201
JRB4547: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-99-213-0246
Manual Control Handle

992130246
D3112SFM06: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-99-408-9045
Retaining Strap

994089045
B6665: RNCC: 3 | RNVC: 9
61BR40165: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-843-4387

5340-99-845-9353
Rod End Connector

5340-99-549-9707
Access Cover

995499707
MS308312: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-99-193-4873
Rod End Clevis

991934873
1Z80566: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-519-7984
Spring Clamp

995197984
HL001509: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-99-760-9988
Access Cover

997609988
FV 2199543: RNCC: 3 | RNVC: 2

2 Mar 1995

5340-99-754-2245
Section Block Clamp

997542245
FV 2095184: RNCC: 3 | RNVC: 2
FV 2095184: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-99-750-1465
Electromagnetic Lock

997501465
GHUZ 050 H43 A01 24V 100PCT: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-99-787-5461
Antipilferage Seal

997875461
TIKSEAL PLY: RNCC: 3 | RNVC: 2

20 Aug 1999

5340-99-828-5703
Loop Clamp

998285703
FV738467: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-99-748-0524
Bow Handle

997480524
MTC5862: RNCC: 3 | RNVC: 2
MTC5862AE: RNCC: 5 | RNVC: 2
FJ961C00001: RNCC: 6 | RNVC: 9

4 Sep 1996

5340-99-753-0103
Mounting Plate

997530103
CM46693: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-99-752-7158
Plunger

997527158
41430942: RNCC: 3 | RNVC: 2
H018011: RNCC: 5 | RNVC: 2
020170 R1 AS00220: RNCC: 5 | RNVC: 2

8 Jun 2010

5340-99-757-7095
Angle Bracket

997577095
1500896: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-657-7780
Mounting Bracket

996577780
JJ103654: RNCC: 3 | RNVC: 2
JJ103654: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-647-6897
Dust And Moisture Seal Protective Plug

996476897
77880712: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-618-0344
Retaining Strap

996180344
SCA64696: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-020-6117
Plain Solid Disc

990206117
84FM6K514BLA: RNCC: 3 | RNVC: 2
6111608: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-103-2625
Loop Clamp

991032625
MBEU16164: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-109-5267
Access Cover

991095267
HE62010Z8: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-721-9587
Mounting Bracket

997219587
SCMM096: RNCC: 3 | RNVC: 2

5 Sep 1994

5340-99-551-8885
Headless Straight Rod

995518885
332/D3900: RNCC: 3 | RNVC: 2

7 Oct 2010

5340-99-827-4445
Handle Grip

998274445
8844636: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-645-9987
Spring Tension Clip

996459987
B437659: RNCC: 3 | RNVC: 2
01-072-6631: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-827-3191
Turnbuckle Assembly

998273191
FV833096: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-143-8752
Block Fairlead

991438752
EG9-73-73: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-902-0126
Clamping Catch

999020126
V951L02-1-1AF: RNCC: 3 | RNVC: 2
13-0063: RNCC: 5 | RNVC: 2
V951L02-1-1AF: RNCC: 5 | RNVC: 2
51L5-1-1AA: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-097-6302
Block Clamp

990976302
MX/00087/AL/019: RNCC: 3 | RNVC: 2
004469511: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-450-4040
Contact Retention C

994504040
0143-013-000: RNCC: 3 | RNVC: 2
77GA1223: RNCC: 6 | RNVC: 9
0143013000: RNCC: 6 | RNVC: 9
5X12424: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-749-6070
Rod End Clevis

997496070
A-440026-001: RNCC: 3 | RNVC: 2
A440026-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-253-6875
Webbing Strap

992536875
1013/27.1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-758-2648
Loop Clamp

997582648
W46958CSH1REF1: RNCC: 3 | RNVC: 2
W46958-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-117-3121
Butt Hinge

991173121
QC31921TEM36: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-561-6173

5340-99-641-0996
Quick Release Pin

5340-99-639-1598

5340-99-406-3519
Mounting Bracket

994063519
332/G7442: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-99-669-1020
Dust And Moisture Seal Protective Cap

996691020
947/99992: RNCC: 3 | RNVC: 2
CV201593: RNCC: 5 | RNVC: 2

6 Dec 2013

5340-99-177-7501
Nut And Bolt Locking Plate

991777501
332/D9038: RNCC: 3 | RNVC: 2
332/D9038: RNCC: 5 | RNVC: 2
114100236: RNCC: 6 | RNVC: 9

10 Aug 2011

5340-99-103-3014
Loop Clamp

991033014
T4: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-99-122-1508
Dust And Moisture Seal Protective Plug

991221508
DP2384: RNCC: 3 | RNVC: 2
DP2384: RNCC: 5 | RNVC: 2
0434-4008: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-632-8090
Screw Thread Insert

5340-99-428-2152
Retaining Catch

5340-99-196-8921
Clamp

5340-99-428-2341

5340-99-633-0905

5340-99-732-4252
Resilient Mount

5340-99-229-5178
Access Cover

992295178
14533449: RNCC: 3 | RNVC: 2
CV185902: RNCC: 5 | RNVC: 2
VOE14533449: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-728-0756

5340-99-720-5819
Quick Release Pin

5340-99-946-9448

5340-99-712-2554
Electrical-Mechanical Equipment Post

997122554
555292: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-292-4938
Support Hook

992924938
701109: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-99-253-5761
Mounting Bracket

992535761
AFU710080: RNCC: 3 | RNVC: 2

18 Nov 2008

5340-99-253-6583
Mounting Plate

992536583
115082SHT137: RNCC: 3 | RNVC: 2

14 May 1991

5340-99-254-5687
General Purpose Guard Rail Section

992545687
AK20431H009: RNCC: 3 | RNVC: 2
CV174301: RNCC: 5 | RNVC: 2

2 Dec 2010

5340-99-215-5943
Tapped Strip

992155943
6810000162: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-99-574-1210
Retaining Clip

995741210
FBU4637: RNCC: 3 | RNVC: 2
54522319: RNCC: 5 | RNVC: 2

20 Apr 1995

5340-99-577-4613
Mounting Bracket

995774613
40007116: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-99-551-1769
Side Block Assembly

995511769
69302422: RNCC: 3 | RNVC: 2
FF962LN0051: RNCC: 6 | RNVC: 9

9 Jul 1996

5340-99-488-8346
Lock Key

994888346
10-70-773: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-99-222-8349
Loop Clamp

992228349
92252006: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-99-958-5136
Angle

999585136
M5725103020100: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-99-965-5492
Mounting Bracket

999655492
FV 846621: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-8864
Spring Holder

999588864
3009W508: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-99-990-0088
Spring Disc

999900088
003161: RNCC: 3 | RNVC: 2
UW333B: RNCC: 6 | RNVC: 9

17 Jul 2000

5340-99-969-1806
Mounting Bracket

999691806
FV 2038981: RNCC: 3 | RNVC: 2
036167: RNCC: 5 | RNVC: 2

21 Sep 1993

5340-99-986-6971
Manual Control Handle

999866971
14611766: RNCC: 3 | RNVC: 2
CV184726: RNCC: 5 | RNVC: 2
VOE14611766: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-99-974-7335
Manual Control Lever

999747335
5634K230: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-99-986-6497
Rigid Caster

999866497
TFE150NY15L: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-99-986-6974
Swivel Caster

999866974
TSK200GR2HD: RNCC: 3 | RNVC: 2

23 Jun 2011

5340-99-985-9234
Block Fairlead

999859234
110033-2639: RNCC: 3 | RNVC: 2
26VC-5184: RNCC: 6 | RNVC: 9

23 Mar 2002

5340-99-962-0644
Dust And Moisture Seal Protective Cap-Plug

999620644
FL15995: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-988-4243
Detent Plunger

999884243
MBEU164912: RNCC: 3 | RNVC: 2
MBEU164912: RNCC: 5 | RNVC: 2

10 May 2002

5340-99-975-1934
Bracket

999751934
M5755339200000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-643-7350
Spring Tension Clip

996437350
Z041DG420432: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-3431
Access Cover

991533431
24797-198: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-99-851-8423
Expansion Shield

998518423
44-160: RNCC: 3 | RNVC: 2
M12 25L: RNCC: 5 | RNVC: 2
528-277: RNCC: 5 | RNVC: 2
M12 25L: RNCC: 5 | RNVC: 2
TT8880122: RNCC: 6 | RNVC: 9

15 Apr 1997

5340-99-307-7804
Bumper

993077804
026GDP1371: RNCC: 3 | RNVC: 2
DP1371: RNCC: 5 | RNVC: 2
052JX-0062: RNCC: 6 | RNVC: 9

27 Jul 2005

5340-99-301-0557
Angle Bracket

993010557
FV 3023259: RNCC: 3 | RNVC: 2
BR90-48-48-11-0059: RNCC: 5 | RNVC: 2
FV 3023259: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-99-419-4678
Nonmetallic Bushing

994194678
UD63141: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-932-7489
Drawer Cover

999327489
DPA1753: RNCC: 3 | RNVC: 2

30 Jun 2004

5340-99-943-3802
Internal Thr Spacer

999433802
P190303: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-961-3426
Locking Plate

999613426
JRA3704: RNCC: 3 | RNVC: 2

12 Apr 2006

5340-99-951-3855
Spring Tension Clip

999513855
487-656: RNCC: 3 | RNVC: 2
900662: RNCC: 5 | RNVC: 2
16-42432: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-947-9646
Double Angle Bracket

999479646
17-45185: RNCC: 3 | RNVC: 2
17-45185: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-99-945-4739
Strap

999454739
16-22258: RNCC: 3 | RNVC: 2
16-22258: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-741-4016
Lock Spindle

997414016
NFR772: RNCC: 3 | RNVC: 2
866AK2483: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-758-0646
Loop Clamp

997580646
C190092: RNCC: 3 | RNVC: 2
C190092AN: RNCC: 5 | RNVC: 2

16 Aug 2001

5340-99-736-6839
Cover Assembly

997366839
MBEU149153: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-99-758-0146
Loop Clamp

997580146
P609010: RNCC: 3 | RNVC: 2
DATASHEET 38: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-736-7172
Door Hook

997367172
1917004: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-949-0810
Mounting Plate

999490810
SDA137541: RNCC: 3 | RNVC: 2
CP102693: RNCC: 5 | RNVC: 2
Z1ZA44274: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-948-6481
Butt Hinge

999486481
AS1876: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-749-0247
Bracket

997490247
M5745758420100: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-553-5915
Loop Clamp

995535915
BSH280: RNCC: 3 | RNVC: 2
90500536: RNCC: 5 | RNVC: 2

13 Mar 2012

5340-99-833-6134
Loop Clamp

998336134
85K2407: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-815-9328
Nut A Locking Plate

5340-99-615-5302
Hinge Bracket

996155302
KB537K1463-000: RNCC: 3 | RNVC: 2
KB537K1463-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-494-4720
Mounting Bracket

994944720
GV577453: RNCC: 3 | RNVC: 2
041AO-009: RNCC: 6 | RNVC: 9
041GX-003: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-99-735-8741
Access Cover

997358741
UX4657: RNCC: 3 | RNVC: 2
44/500/105/41/1007: RNCC: 5 | RNVC: 2
DSP/033/14/01/7: RNCC: 5 | RNVC: 2
UX4657/RRA: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-133-6803
Padlock Cover

991336803
3A-802897 B: RNCC: 3 | RNVC: 2
802897: RNCC: 5 | RNVC: 2
802897: RNCC: 5 | RNVC: 2
060XD-005: RNCC: 6 | RNVC: 9

15 Mar 2006

5340-99-785-5190
Headless Straight Rod

997855190
SSN07/W/556/60/2/6: RNCC: 3 | RNVC: 2
W/556/60/2/6: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-715-9164
Retaining Strap

997159164
WD4184-00057-101: RNCC: 3 | RNVC: 2
WD4184-00057: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-459-6530
Block Fairlead

994596530
25CW549: RNCC: 3 | RNVC: 2
26TD2015: RNCC: 6 | RNVC: 9
26TD-2015: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-994-6015
Lock-Release Lever

999946015
EB5210B119-105: RNCC: 3 | RNVC: 2
095ZG-007: RNCC: 6 | RNVC: 9

25 Jul 2009

5340-99-987-6326
Loop Clamp

999876326
T012M06P: RNCC: 3 | RNVC: 2
CL03-072Z: RNCC: 5 | RNVC: 2

18 May 2006

5340-99-649-1408
Mounting Plate

996491408
9447AT: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-605-7667
Spring Tension Clip

996057667
FV2172442: RNCC: 3 | RNVC: 2

20 Aug 1993

5340-99-269-2917
Angle Bracket

992692917
AML59335: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-99-153-4879
Loop Clamp

991534879
BSH060: RNCC: 3 | RNVC: 2
91001176: RNCC: 5 | RNVC: 2

4 Feb 2013

5340-99-128-3815

5340-99-115-3988

5340-99-124-4130

5340-99-116-3216
Clevis

5340-99-632-5258
Plain Solid Disc

5340-99-836-7397
Clip

5340-99-831-4174

5340-99-211-9753
Angle Bracket

5340-99-212-1126
Mounting Plate

5340-99-209-8337

5340-99-224-4908
Angle Bracket

992244908
3625792: RNCC: 3 | RNVC: 2
3625792: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-99-562-9453
Dust And Moisture Seal Protective Cap

995629453
332/E0988: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-99-300-6343
Bumper

993006343
37591/460: RNCC: 3 | RNVC: 2

12 Feb 1993

5340-99-235-4232
Resilient Mount

992354232
17/1832: RNCC: 3 | RNVC: 2
15247324: RNCC: 5 | RNVC: 2

6 Sep 1993

5340-99-957-4495
Mounting Plate

999574495
FV 2063379: RNCC: 3 | RNVC: 2
FV 2063379: RNCC: 5 | RNVC: 2

4 Oct 1996

5340-99-431-9961
Double Angle Bracket

994319961
J28500218-401: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-99-198-8666
Angle Bracket

991988666
WG1382-9140-041: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-99-777-6506
Angle Bracket

997776506
SSN.07/M/601/80/1/8: RNCC: 3 | RNVC: 2
SSN.13/M/601/86/1/208: RNCC: 5 | RNVC: 2
M/601/80/1/8: RNCC: 5 | RNVC: 2
M/601/86/1/208: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-149-3801
Mounting Plate

991493801
110004-11503ND: RNCC: 3 | RNVC: 2
110004-11503ND: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-607-3218
Retaining Strap

996073218
AX54848: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-949-8432
Spring Tension Clip

999498432
LP163911: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-700-9217
Detent Plunger

997009217
252NM43020: RNCC: 3 | RNVC: 2
NM43020: RNCC: 5 | RNVC: 2

15 Nov 1990

5340-99-523-0627
Rim Lock Key

995230627
FK4: RNCC: 3 | RNVC: 1
D6145401TEM1: RNCC: 5 | RNVC: 2
FK4VR: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-940-4168
Handwheel

999404168
NE41213: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-99-943-1705
Screwed Spacer

999431705
P191755: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-0647
Corrosion Preventive Anode

999580647
2400132: RNCC: 3 | RNVC: 2

19 May 2005

5340-99-957-1969
Filler Opening Cap

999571969
53424: RNCC: 3 | RNVC: 2

11 Jan 1994

5340-99-961-2464
Mounting Bracket

999612464
AS54985: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-99-957-8569
Mounting Plate

999578569
FV 2228586: RNCC: 3 | RNVC: 2
FV 2228586: RNCC: 5 | RNVC: 2

13 May 2002

5340-99-977-8278
Bag Clamp

999778278
108143: RNCC: 3 | RNVC: 2
3AP4732: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-957-4657
Mounting Plate

999574657
RCD10025: RNCC: 3 | RNVC: 2

7 Dec 1996

5340-99-977-4048
Butt Hinge Leaf

999774048
FV 2061716: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-790-5757
Tubular Fairlead

997905757
RGPO-80-SS: RNCC: 3 | RNVC: 2

21 Mar 2005

5340-99-213-3201
Mounting Plate

992133201
WG1510-5252-101: RNCC: 3 | RNVC: 2
119BV-020: RNCC: 6 | RNVC: 9

4 Jul 2009

5340-99-792-0189
Buffer

997920189
NO PRIMARY REF 99-792-0189: RNCC: 3 | RNVC: 2
397-4752: RNCC: 5 | RNVC: 2

23 Oct 2003

5340-99-609-3154
Butt Hinge Leaf

996093154
YB8-82-17: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-599-9621
Wheel

995999621
NO PRIMARY REF 99-599-9621: RNCC: 3 | RNVC: 2
1815 75: RNCC: 5 | RNVC: 2
SM044: RNCC: 5 | RNVC: 2
VF-250-IR: RNCC: 5 | RNVC: 2
0012Y-048: RNCC: 6 | RNVC: 9

5 Jun 2000

5340-99-573-6668
Multiple Angle Bracket

995736668
5020-602: RNCC: 3 | RNVC: 2
5118-11-352: RNCC: 5 | RNVC: 2
4175602: RNCC: 5 | RNVC: 2
FE980EJ0009: RNCC: 6 | RNVC: 9

17 Nov 1997

5340-99-374-3376
Helical Compression Spring Seat

993743376
Z16-224 21323112: RNCC: 3 | RNVC: 2
04520 R1 DL00616: RNCC: 5 | RNVC: 2

14 Sep 2009

5340-99-812-9329
General Purpose Resilient Mount

998129329
FV665608-30: RNCC: 3 | RNVC: 2
6852001: RNCC: 5 | RNVC: 2
FMW191: RNCC: 5 | RNVC: 2
520M75: RNCC: 5 | RNVC: 2
AHRS520H: RNCC: 5 | RNVC: 2
AHRS520H: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-131-4769
Mounting Bracket

991314769
EU5210B189-101: RNCC: 3 | RNVC: 2

31 Aug 2002

5340-99-176-7634
Bracket

991767634
BK116: RNCC: 3 | RNVC: 2
B075-1144: RNCC: 5 | RNVC: 2
002IM0003: RNCC: 6 | RNVC: 9

2 Dec 2000

5340-99-168-7312
Catch Strike

991687312
KAL5508: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-99-676-4682
Mounting Plate

996764682
034770: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-99-205-1380
Knob

5340-99-204-9745

5340-99-531-1769
Turnbuckle Body

995311769
1023-24-34: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-668-4373
Retaining Strap

996684373
POG118104: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-99-215-7680
Webbing Strap

992157680
61466: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-99-200-5153
Turnbuckle

992005153
SS28: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-414-6190
Angle Bracket

994146190
JN0410005: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-126-9919
Leather Strap

991269919
35NM62657: RNCC: 3 | RNVC: 2
NM62657: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-99-712-8283
Retaining Strap

997128283
AM5389: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-615-5860
Dust And Moisture Seal Protective Cap

996155860
SL4379B05: RNCC: 3 | RNVC: 2
SL4379B05: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-724-5828
Mounting Bracket

997245828
FV 2103070: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-99-811-2694
Section Block Clamp

998112694
0614-2414: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-99-809-5891
Angle Bracket

998095891
EMK5453: RNCC: 3 | RNVC: 2
29D935: RNCC: 5 | RNVC: 2

10 Oct 1982

5340-99-809-8967
Handwheel

998098967
569835: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-633-4747
Butt Hinge Leaf

996334747
3AB23365: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-983-0710
Probe

999830710
SR0626/8: RNCC: 3 | RNVC: 2
43850-18: RNCC: 6 | RNVC: 9
1197-94/28: RNCC: 6 | RNVC: 9

18 Jul 1997

5340-99-915-4885
Cover

999154885
NO PRIMARY REF 99-915-4885: RNCC: 3 | RNVC: 2
3990/16606: RNCC: 5 | RNVC: 2
10RS2869: RNCC: 6 | RNVC: 9

23 Aug 2005

5340-99-944-2800
General Purpose Resilient Mount

999442800
13-601-1MN60: RNCC: 3 | RNVC: 2
95-31149: RNCC: 5 | RNVC: 2
A95-31149: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-841-5135
Loop Clamp

998415135
FV2261351/35: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-99-517-1947
Rubber Bumper

995171947
93/92: RNCC: 3 | RNVC: 2

23 May 1994

5340-99-350-6259
Dust And Moisture Seal Protective Cap

993506259
PM0482-0766-1: RNCC: 3 | RNVC: 2
0482-0766: RNCC: 5 | RNVC: 1
1B/482-766: RNCC: 5 | RNVC: 2
482-766: RNCC: 5 | RNVC: 2
0766: RNCC: 6 | RNVC: 9

26 Mar 1993

5340-99-462-6627
Pipe Hanger

994626627
NO PRIMARY REF 99-462-6627: RNCC: 3 | RNVC: 2
P5790/3: RNCC: 5 | RNVC: 2
TT7778931: RNCC: 6 | RNVC: 9

17 Oct 2001

5340-99-051-7547
Dust And Moisture Seal Protective Cap-Plug

990517547
7160-35-E: RNCC: 3 | RNVC: 2
C900548: RNCC: 5 | RNVC: 2
C900548Q: RNCC: 5 | RNVC: 2

15 Feb 1994

5340-99-438-0440
Holding Device

994380440
2 0034-554: RNCC: 3 | RNVC: 2
2 0034-554: RNCC: 5 | RNVC: 2

1 Aug 2003

5340-99-665-4622
Electronic Equipment Hardware Kit

996654622
563379: RNCC: 3 | RNVC: 2

6 Dec 2001

5340-99-391-2866
Manual Control Lever

993912866
40004590: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-99-199-0541
Loop Clamp

991990541
EF811A24: RNCC: 1 | RNVC: 2
TA028M014NB24: RNCC: 3 | RNVC: 2
11944PH24Y: RNCC: 3 | RNVC: 2
TA028M014NB24: RNCC: 5 | RNVC: 2
1ME9920: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-660-5454
Bow Handle

996605454
IM2992: RNCC: 3 | RNVC: 2

11 Feb 1993

5340-99-465-8440
Blank Key

994658440
29G1012: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-151-2846
Webbing Strap

991512846
33 34968: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-99-662-7859
Angle Bracket

996627859
FV 2095742: RNCC: 3 | RNVC: 2
FV 2095742: RNCC: 5 | RNVC: 2

5 Nov 1991

5340-99-798-7778
Manual Control Lever

997987778
0019310107: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-99-805-1040
Loop Clamp

998051040
861018: RNCC: 3 | RNVC: 2
LV6MT4LU861018: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-746-2230
Loop Clamp

997462230
PD000106: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-6902
Angle Bracket

995626902
FV2293491: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-99-051-0637
Dust Cup Assembly

5340-99-051-1898

5340-99-100-1318

5340-99-200-8156
Externally Rod End

992008156
EM223: RNCC: 3 | RNVC: 2
90VLEM223: RNCC: 6 | RNVC: 9
160106: RNCC: 6 | RNVC: 9
42L217: RNCC: 6 | RNVC: 9
X3XCVEM223: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-372-4325
General Purpose Resilient Mount

993724325
ERR2337: RNCC: 3 | RNVC: 2
(241)AE095ERR2337: RNCC: 8 | RNVC: 2
ERR2337: RNCC: 8 | RNVC: 2

6 Jun 1996

5340-99-695-3322
Double Angle Bracket

996953322
48315: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-99-549-6874
Dowel

995496874
10839710: RNCC: 3 | RNVC: 2

11 May 2004

5340-99-613-8658
Bracket

996138658
M5725841520000: RNCC: 3 | RNVC: 2

11 May 2013

5340-99-604-9385
Hinge Bracket

996049385
A309238: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-605-3321
Mounting Bracket

996053321
110642SHT6953: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-148-1177
Dust And Moisture Seal Protective Cap

991481177
3029W053: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-99-424-3235
Access Cover

994243235
A197878: RNCC: 3 | RNVC: 2
26FX4004: RNCC: 6 | RNVC: 9
26FX4004: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-466-9545
Tongue Adaptor

994669545
NTS11070: RNCC: 3 | RNVC: 2
5W8123: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-535-6468
Angle Bracket

995356468
WG0081-0750-041: RNCC: 3 | RNVC: 2

12 Feb 1996

5340-99-951-7286
Barrel Bolt

999517286
NO PRIMARY REF 99-951-7286: RNCC: 3 | RNVC: 2
911: RNCC: 5 | RNVC: 2
PB9453: RNCC: 5 | RNVC: 2

12 Jul 1979

5340-99-961-3845
Dust And Moisture Seal Protective Plug

999613845
WG1579-0093-002: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-99-131-7918
Block Clamp

991317918
J56100769-004: RNCC: 3 | RNVC: 2

11 Sep 2003

5340-99-271-4712
Manual Control Lever

992714712
44-00259-000: RNCC: 3 | RNVC: 2
013A20011: RNCC: 6 | RNVC: 9

5 Dec 2001

5340-99-944-4390
Rim Clenching Clamp

999444390
B117400: RNCC: 3 | RNVC: 2
80-10-0755BLACKRED: RNCC: 3 | RNVC: 2
80-10-0755BLACKRED: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-958-7096
Wa Fitting Assembly

999587096
WST422630-501: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-99-946-1134
Manual Control Lever

999461134
80-06-32-0543: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-606-4911
Helical Compes Seat

996064911
RU31888: RNCC: 3 | RNVC: 2
85-800-9131: RNCC: 6 | RNVC: 9
743-606-4911: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-789-9696
Angle Bracket

997899696
824635-00: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-99-611-0650
Hinge Bracket

996110650
137302B426: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-617-5525
Retaining Strap

996175525
AX59991: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-430-2549
Dust And Moisture Seal Boot

994302549
33784: RNCC: 3 | RNVC: 2
36FF29787: RNCC: 6 | RNVC: 9

5 Feb 1980

5340-99-548-5465
Helical Compression Spring Seat

995485465
BM24645: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-667-0397
Double Angle Bracket

996670397
FV2291962: RNCC: 3 | RNVC: 2
00A0558A: RNCC: 5 | RNVC: 2

8 Apr 2008

5340-99-495-5182
Mounting Plate

994955182
6930481: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-614-7226
Helical Compression Spring Seat

996147226
5104010216: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-352-3817
Mounting Bracket

993523817
AB/1/8/1008: RNCC: 3 | RNVC: 2
MM9043: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-99-125-1883
Compression Cup

991251883
A4-9450: RNCC: 3 | RNVC: 2
21C2207: RNCC: 6 | RNVC: 9
C1S767SH21TEM16: RNCC: 6 | RNVC: 9
J2JB10925: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-879-5184
Button

998795184
NO PRIMARY REF 99-879-5184: RNCC: 3 | RNVC: 2
ILLINOIS 207 ED 179-00: RNCC: 5 | RNVC: 2
26VC-20315: RNCC: 6 | RNVC: 9

22 Feb 2002

5340-99-651-5487
Rod End Clevis

996515487
P-880092-011: RNCC: 3 | RNVC: 2
P880092-011: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-320-1020
Guide

993201020
A2/4590L1435.1: RNCC: 3 | RNVC: 2
4590L1435.1: RNCC: 5 | RNVC: 2

20 Apr 1995

5340-99-558-0252
Access Cover

995580252
SSN07Z520-41-19-16-7: RNCC: 3 | RNVC: 2
SSN07Z520-41-19-16: RNCC: 5 | RNVC: 2
Z520-41-19-16: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-786-6151
Plain Solid Disc

997866151
3201-13323-20-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-902-4395
Rebuilding Kit

999024395
2 0060-637: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-99-640-7090
Loop Clamp

996407090
L5404: RNCC: 3 | RNVC: 2
36BB3348: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-738-6190
Electrical-Mec Post

5340-99-742-6319
Loop Clamp

5340-99-663-1712

5340-99-660-8156
Dus Protective Plug

5340-99-642-5259

5340-99-664-7929
Loop Clamp

5340-99-738-8060
Clip

5340-99-901-0286

5340-99-747-4807

5340-99-762-8336
Spring Tension Clip

5340-99-746-4617

5340-99-747-4463
Pin Quick Release

5340-99-513-8309
Plain Solid Disk

995138309
JT22891: RNCC: 3 | RNVC: 2

24 Feb 1995

5340-99-152-9351
Swivel Caster

991529351
S6908: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-99-323-6967
Sealing Kit

993236967
82-971A: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-99-653-9771
Quick Release Pin

996539771
3924-70172: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-633-5452
Snap Hook

996335452
39453: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-750-0283
Hing Mounting Block

997500283
VDS37681: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-99-488-7773
General Purpose Access Door

994887773
UG0531886: RNCC: 3 | RNVC: 2
UG0531886: RNCC: 5 | RNVC: 9

4 Oct 2006

5340-99-195-6280
Ferrule Blank

991956280
77800227: RNCC: 3 | RNVC: 2
77800227: RNCC: 5 | RNVC: 2

16 Sep 1999

5340-99-617-5526
Retaining Strap

996175526
AX59992: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-463-6347
Mounting Plate

994636347
FV 2033648: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-99-577-4503
Access Cover

995774503
1002634693: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-99-946-3329

5340-99-944-2739
Resilient Mount

5340-99-536-2166
Block Clamp

995362166
110087SHT367: RNCC: 3 | RNVC: 2
26VC21724: RNCC: 6 | RNVC: 9

10 Apr 2002

5340-99-535-9657
Block Clamp

995359657
110087-119: RNCC: 3 | RNVC: 2
26VC21726: RNCC: 6 | RNVC: 9

15 Jan 2002

5340-99-151-6405
Packing Piece

991516405
3312710231: RNCC: 3 | RNVC: 2
A22116 ITEM 812: RNCC: 5 | RNVC: 2

12 May 2010

5340-99-500-4386
Mounting Plate

995004386
MBEU64069: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-99-490-4830
Access Cover

994904830
NNU500020: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-99-536-4391
Access Cover

995364391
10935: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-647-1844
Dust And Moisture Seal Protective Cover

996471844
1070-704: RNCC: 3 | RNVC: 2
1070-704: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-553-8653
Bracket

995538653
M5725456920000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-457-3785
Butt Strap

5340-99-223-5056

5340-99-545-5006
Protective Cap-Plug

5340-99-545-4986
Electrical-Mec Post

5340-99-464-7107
Nozzle

5340-99-716-2177
Bracket

997162177
WD4110-00226-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-382-4657
Loop Clamp

993824657
EF827-25: RNCC: 3 | RNVC: 2

10 Apr 2008

5340-99-813-1432
Bracket Assembly

998131432
54-19-00711-00: RNCC: 3 | RNVC: 2

26 Jan 2010

5340-99-901-8852
Control Rod

999018852
NO PRIMARY REF 99-901-8852: RNCC: 3 | RNVC: 2
W57876SH1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-972-3128
Resilient Mount

999723128
N157069: RNCC: 3 | RNVC: 2
0413-972-3128: RNCC: 6 | RNVC: 9
5UA8265: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-157-9754
Angle Bracket

991579754
37880-204: RNCC: 3 | RNVC: 2

25 May 2012

5340-99-969-6133
Cushioning Pad

999696133
100286-4023-001: RNCC: 3 | RNVC: 2
WE123A2: RNCC: 6 | RNVC: 9

19 Jan 2000

5340-99-951-6537
Spring Tension Clip

999516537
A30-7716-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-562-5083
Block Mounting

995625083
NO PRIMARY REF 99-562-5083: RNCC: 3 | RNVC: 2
2351021: RNCC: 5 | RNVC: 2
C502-LLM988642: RNCC: 6 | RNVC: 9

20 Jun 2001

5340-99-551-5836
Extension Drawer Slide

995515836
DM22232-621-12: RNCC: 3 | RNVC: 2
261171: RNCC: 5 | RNVC: 2

2 Apr 2008

5340-99-952-1542
Comp Helical Spring

999521542
NO PRIMARY REF 99-952-1542: RNCC: 3 | RNVC: 2
80-08-81-0713: RNCC: 5 | RNVC: 2
16634: RNCC: 5 | RNVC: 2

7 Nov 1979

5340-99-201-4834
Rod End Clevis

992014834
NO PRIMARY REF 99-201-4834: RNCC: 3 | RNVC: 2
1GY14546U: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-7056
Mounting Bracket

999587056
EU2580B007-045: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-99-646-3322
Mounting Bracket

996463322
35131603115: RNCC: 3 | RNVC: 2
35131603115: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-805-8278
Rim Lock

5340-99-808-9782

5340-99-827-0271

5340-99-805-8281

5340-99-915-8717
Mounting Plate

999158717
ACO47959: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-99-925-0648
Blank Panel

999250648
48503: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-99-915-4384
Multiple Angle Bracket

999154384
JR34938: RNCC: 3 | RNVC: 2
XP97PI01069: RNCC: 6 | RNVC: 9

4 Sep 1997

5340-99-929-2042
Catch

999292042
28022601: RNCC: 3 | RNVC: 2
CV195910: RNCC: 5 | RNVC: 2

19 Dec 2011

5340-99-833-1209
Retaining Clip

998331209
6311343: RNCC: 3 | RNVC: 2
LV7BD6311343: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-918-6192
Retaining Strap

999186192
ASWE19476: RNCC: 3 | RNVC: 2
A223072: RNCC: 5 | RNVC: 2
0628-186192: RNCC: 6 | RNVC: 9
AP186192: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-895-3325
Mounting Bracket

998953325
20K.710.006: RNCC: 3 | RNVC: 2
CV198972: RNCC: 5 | RNVC: 2

14 Oct 2013

5340-99-892-1028
Loop Clamp

998921028
ALU4C: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-99-894-1715
Mounting Bracket

998941715
176996: RNCC: 3 | RNVC: 2
CV201131: RNCC: 5 | RNVC: 2
176996: RNCC: 5 | RNVC: 2

16 Sep 2013

5340-99-702-6722
Mounting Plate

997026722
40005927: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-99-927-2150
Headless Straight Rod

999272150
JATE22657: RNCC: 3 | RNVC: 2

14 May 2008

5340-99-833-6993
Butt Hinge

998336993
FV 928081: RNCC: 3 | RNVC: 2
6351RH: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-430-4443
Nut And Bolt Locking Plate

994304443
22A74: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-214-6768
Resilient Mount

992146768
W1008-01: RNCC: 3 | RNVC: 2
01VB50198: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-873-4637
Mounting Bracket

998734637
EB5334B015-041: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-99-733-1837
Mounting Bracket

997331837
904801-2229-000: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-99-659-2320
Mounting Bracket

996592320
P-890531-001: RNCC: 3 | RNVC: 2
P890531-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-793-4579
Mounting Bracket

997934579
P-780031-695: RNCC: 3 | RNVC: 2
P780031-695: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-143-0278
Catch Strike

991430278
110142-37949: RNCC: 3 | RNVC: 2
110142-37949: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-503-3965
Lock Key

995033965
B091722: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-99-676-6324
Mounting Plate

996766324
00009664-040: RNCC: 3 | RNVC: 2

26 Sep 2011

5340-99-413-5876
Butt Hinge

994135876
GMA9301: RNCC: 3 | RNVC: 9
53Y5666: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-131-1808
Mounting Bracket

991311808
110664SHT559ND: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-99-115-4930
Buckle

991154930
IAC 4129B: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-860-0380
Mounting Plate

998600380
332/D5459: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-99-894-8404
Angle Bracket

998948404
WPG 9577: RNCC: 3 | RNVC: 2

19 Aug 1992

5340-99-732-9873
Angle Bracket

997329873
64 MZ 739: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-896-0609
Cable Clip

998960609
240429: RNCC: 3 | RNVC: 2
61RV40379: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-904-0523
Protection

999040523
41221045: RNCC: 3 | RNVC: 2

3 May 2011

5340-99-356-4419
Access Door

993564419
MGD0403N: RNCC: 3 | RNVC: 2
MGD: RNCC: 5 | RNVC: 1

13 May 1993

5340-99-462-2464
Rod End Clevis

994622464
250125: RNCC: 3 | RNVC: 9
27Y11582: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-733-1139
Boot

997331139
G202K: RNCC: 3 | RNVC: 2
62 00103 000: RNCC: 5 | RNVC: 2
RDH1313: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-735-1602
Mounting Bracket

997351602
JJ108432: RNCC: 3 | RNVC: 2
JJ108432: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-782-7814
Retaining Strap

5340-99-304-8516
Mounting Bracket

993048516
MXH1913: RNCC: 3 | RNVC: 2

19 May 1999

5340-99-347-0498
Mounting Bracket

993470498
AK05580F003: RNCC: 3 | RNVC: 2
CV174195: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-99-535-9786
Access Cover

995359786
115021SHT513: RNCC: 3 | RNVC: 2
26VC-716: RNCC: 6 | RNVC: 9

1 Feb 2002

5340-99-326-3093
Bracket

993263093
M5725838620000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-665-3358
Angle Bracket

996653358
202-34193: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-99-607-0386
Loop Clamp

996070386
U139011: RNCC: 3 | RNVC: 2
1309011: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-882-1230
Filler Opening Cap

998821230
MXK2525: RNCC: 3 | RNVC: 2

26 Jul 1991

5340-99-151-1114
Leak Stopper Set

991511114
B1916: RNCC: 3 | RNVC: 2
002AB0003: RNCC: 6 | RNVC: 9

3 Nov 2000

5340-99-153-8887
Loop Clamp

991538887
143200300: RNCC: 3 | RNVC: 2
CV130065: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-99-126-2730
Lockshield

5340-99-107-7741

5340-99-102-1763

5340-99-102-7253

5340-99-126-0644
Clip

5340-99-112-0688

5340-99-122-7553

5340-99-196-9017
Tube Clamp Bracket

5340-99-663-5789
Locking Clip

5340-99-462-6556
Double Angl Bracket

5340-99-194-9289

5340-99-122-5925

5340-99-140-8653
Bracket

5340-99-500-1967
Extens Drawer Slide

5340-99-105-0530
Rubber Bumper Cup

5340-99-101-5479
Control Rod