What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 109 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 109 of 368

5340-99-987-6302
Pull Plunger Handle

999876302
EFMC78000-013: RNCC: 3 | RNVC: 2

8 Feb 2003

5340-99-616-1490
Pipe Clamp

996161490
C322358-117: RNCC: 3 | RNVC: 2
C341855: RNCC: 5 | RNVC: 1
001JZ0065: RNCC: 6 | RNVC: 9

10 Aug 2000

5340-99-441-4777
Mounting Plate

994414777
GM-C-53319: RNCC: 3 | RNVC: 2
GM53319: RNCC: 5 | RNVC: 2
NTS10014: RNCC: 5 | RNVC: 2
GM-C-53319: RNCC: 5 | RNVC: 2
5G5459: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-961-3179
Anchor Block Assemb

999613179
7285/429: RNCC: 3 | RNVC: 2

12 Jun 2004

5340-99-766-6472
Bow Handle

997666472
478K-HAN-037PL: RNCC: 3 | RNVC: 2
PL59-070-01 ITEM 11: RNCC: 5 | RNVC: 2
HAF500: RNCC: 5 | RNVC: 2
520368: RNCC: 5 | RNVC: 2
PL59-070-01/11: RNCC: 5 | RNVC: 2
11A4/102030: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-254-9698
Back Plate Assembly

992549698
FV2118566: RNCC: 3 | RNVC: 2
FV2118566: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-721-2249
Butt Hinge

997212249
210: RNCC: 3 | RNVC: 1
32820: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-99-253-2859
Mounting Plate

992532859
NKB337: RNCC: 3 | RNVC: 2
3750594: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-321-5575
Line Supporting Strap

993215575
NO PRIMARY REF 99-321-5575: RNCC: 3 | RNVC: 2
390-432: RNCC: 5 | RNVC: 2

26 Nov 1993

5340-99-802-5556
Mounting Bracket

998025556
L-42-0810-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-659-0367
Mounting Bracket

996590367
P-620407-420: RNCC: 3 | RNVC: 2
P620407-420: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-737-4149
Loop Clamp

997374149
AS5419-12-3-4: RNCC: 2 | RNVC: 2

7 Apr 2003

5340-99-665-8128
Mounting Bracket

996658128
330E68-0106-20: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-99-658-6720
Flange

996586720
5835-171002: RNCC: 3 | RNVC: 2
H38-3508-50: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-149-9357

5340-99-662-7275
Grooved Clamp Coupling Half

996627275
6-4V1269: RNCC: 3 | RNVC: 2

7 Aug 1995

5340-99-143-0602
Buckle

991430602
F54-1: RNCC: 3 | RNVC: 2
26TD7328: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-146-6372

5340-99-900-9106
Loop Clamp

999009106
B9272-7: RNCC: 3 | RNVC: 2
AV7: RNCC: 5 | RNVC: 2
KAL0139: RNCC: 5 | RNVC: 2

15 Mar 1991

5340-99-169-7763

5340-99-719-1270
Retaining Strap

997191270
V102237: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-194-8789
Filler Opening Cap

991948789
P2863: RNCC: 3 | RNVC: 2
268282: RNCC: 5 | RNVC: 2
E7601-1: RNCC: 5 | RNVC: 2
42L702: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-961-2383
Location Strip

999612383
6930510: RNCC: 3 | RNVC: 2
FF9530C0125: RNCC: 6 | RNVC: 9

11 May 1995

5340-99-622-0197
Compression He Seat

5340-99-786-2504
Access Door

997862504
MGD0606N: RNCC: 3 | RNVC: 2
MGD: RNCC: 5 | RNVC: 1

13 May 1993

5340-99-619-5705

5340-99-792-7718
Loop Clamp

997927718
200863644: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-206-2543
Retaining Strap

992062543
A274: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-770-1412
Bumper

997701412
WW407700: RNCC: 3 | RNVC: 2

17 Sep 1985

5340-99-953-0168
Retaining Band

999530168
K17329: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-951-8640
Frameplate

999518640
K323647: RNCC: 3 | RNVC: 2
002MF-019: RNCC: 6 | RNVC: 9

15 Mar 2000

5340-99-768-9059
Engine Accessory Bracket

997689059
JJ108433: RNCC: 3 | RNVC: 2
JJ108433: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-792-5437
Spring Tension Clip

997925437
110027-15035: RNCC: 3 | RNVC: 2
110027-15035: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-768-5538
Motor Support Brack

997685538
1261C020: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-624-7475
Angle Bracket

5340-99-560-0848

5340-99-716-1726
Angle Bracket

997161726
DDS2051F40P18C: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-794-0142
Mounting Plate

997940142
8213 237 4885: RNCC: 3 | RNVC: 2
8213 237 4885: RNCC: 5 | RNVC: 2

28 Jul 2000

5340-99-721-9761
Webbing Strap

997219761
FV 2208975: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-99-716-6607
Retaining Strap

997166607
WK26777: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-377-5685
Mounting Plate

993775685
40001011: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-99-483-2630
Access Cover

994832630
AML59315: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-99-577-8296
Anchor Strap

995778296
318068001: RNCC: 3 | RNVC: 2

22 Apr 2003

5340-99-574-0885
Retaining Band

995740885
1123-4015: RNCC: 3 | RNVC: 2

28 May 1991

5340-99-648-2215
Dust And Moisture Seal Protective Cap

996482215
A1027: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-712-7835
Ball Socket Seat

997127835
423922: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-738-5827

5340-99-102-9101
Mounting Bracket

991029101
VU6675: RNCC: 3 | RNVC: 2
36AD1681: RNCC: 6 | RNVC: 9

25 Jul 1979

5340-99-759-6971
Rod End Clevis

997596971
6M4FP12437: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-132-8354
Dust And Moisture Seal Protective Cap-Plug

991328354
P30707: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-99-617-4036
Dust And Moisture Seal Protective Cap

996174036
HLN1703: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-124-0483
Retaining Strap

991240483
TP138: RNCC: 3 | RNVC: 2
C203: RNCC: 5 | RNVC: 2
4K4048: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-700-2448
Drogue Attachm Line

997002448
MBEU5769: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-520-4098
Extension Drawer Slide

995204098
D637935: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-931-5567
Rod End Clevis

999315567
FV 3027021: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-99-449-4460
Retaining Strap

994494460
WP65B: RNCC: 3 | RNVC: 2
2500602714: RNCC: 5 | RNVC: 2
79431396: RNCC: 5 | RNVC: 2

24 Nov 2011

5340-99-427-1417
Retaining Strap

994271417
BA94903: RNCC: 3 | RNVC: 2
BA94903: RNCC: 5 | RNVC: 9
36VV20992: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-793-3716
Pipe Support

997933716
B36877: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-99-657-7778
Mounting Bracket

996577778
JJ102946: RNCC: 3 | RNVC: 2
JJ102946: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-962-3951
Leather Strap

999623951
N0D3151-36: RNCC: 3 | RNVC: 2
20949411: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-963-3043
Spring Tension Clip

999633043
N0D3132-15ITEM51: RNCC: 3 | RNVC: 2
226627: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-990-6928
Mounting Plate

999906928
EA5352D531-103: RNCC: 3 | RNVC: 2

17 Oct 2008

5340-99-989-1154
Mounting Plate

999891154
330E76-1115-20: RNCC: 3 | RNVC: 2

4 Apr 2003

5340-99-611-3285
Loop Clamp

996113285
RK13311: RNCC: 3 | RNVC: 2
85-101-2703: RNCC: 6 | RNVC: 9

12 Jun 1995

5340-99-495-4784
Angle Bracket Set

994954784
8001-0088A: RNCC: 3 | RNVC: 2

29 May 2013

5340-99-983-0424
Dust And Moisture Seal Protective Plug

999830424
N03874: RNCC: 1 | RNVC: 2
HTE7160-25U: RNCC: 3 | RNVC: 2

11 Mar 1993

5340-99-052-1606
Section Block Clamp

990521606
EA122-023: RNCC: 3 | RNVC: 2

29 Aug 1997

5340-99-902-2953
Mounting Bracket

999022953
EA5331B729-043: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-99-325-0680
Mounting Bracket

993250680
280-100-231-06: RNCC: 3 | RNVC: 2

16 Nov 2011

5340-99-371-9076
General Purpose Resilient Mount

993719076
KQB500550: RNCC: 3 | RNVC: 2

8 Jul 2010

5340-99-603-6912
Loop Clamp

996036912
A276215: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-205-8174
Angle Bracket

992058174
FV698414: RNCC: 3 | RNVC: 2
AAC29C77: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-521-2901
Rod End Clevis

995212901
JR31466: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-99-363-1115
Door Handle Unit

993631115
103.33: RNCC: 3 | RNVC: 2
103.33: RNCC: 5 | RNVC: 2

19 Feb 2013

5340-99-455-9990
Mounting Bracket

994559990
CK0515184: RNCC: 3 | RNVC: 2
CK0515184: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-99-424-4650
Retaining Strap

994244650
A217201: RNCC: 3 | RNVC: 2
A217201: RNCC: 5 | RNVC: 9
26FX8369: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-531-8925
Helical Compression Spring Retainer

995318925
UX17168: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-349-5318
Block Clamp

993495318
110050-2433: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-99-610-9575
Manual Control Lever

996109575
137295E406: RNCC: 3 | RNVC: 2
137295E404: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-387-2519
Mounting Plate

993872519
54378: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-99-542-6729
Loop Clamp

995426729
FD9203: RNCC: 3 | RNVC: 2
FD9203A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-324-6198
Mending Plate

993246198
50006863: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-99-867-7985
Electrical-Mec Post

998677985
GT24196-15/1: RNCC: 3 | RNVC: 2
GT24196-15/1: RNCC: 5 | RNVC: 2
5365-99-N80-3680: RNCC: 6 | RNVC: 9

29 Mar 1994

5340-99-322-3162
Block Fairlead Section

993223162
EB2810B401-111: RNCC: 3 | RNVC: 2
EB2810B401: RNCC: 5 | RNVC: 1

16 Sep 1993

5340-99-812-5597
Panel

998125597
14 E 201655 ITEM L2: RNCC: 3 | RNVC: 2
14 E 201655/L2: RNCC: 5 | RNVC: 2

12 Apr 2006

5340-99-239-4929
Angle Bracket

992394929
3201-66574-20-3: RNCC: 3 | RNVC: 2
3201-66574-20-3-01: RNCC: 5 | RNVC: 2
HT2804 REF. E2 1193: RNCC: 5 | RNVC: 2
WES-2424-3: RNCC: 5 | RNVC: 2
25758277: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-99-900-0882
Loop Clamp

999000882
AS3180/7B: RNCC: 2 | RNVC: 2
DEFSTAN53-15: RNCC: 4 | RNVC: 1
25233-00871: RNCC: 5 | RNVC: 2
B00978: RNCC: 5 | RNVC: 2
NK8710: RNCC: 5 | RNVC: 2
42511-905-4: RNCC: 5 | RNVC: 2
B55032-777: RNCC: 5 | RNVC: 2
TABLE 1C: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-726-4414
Nut Cover

997264414
KX48/15/10/3: RNCC: 3 | RNVC: 2
48 15 10 3: RNCC: 3 | RNVC: 2
4815103: RNCC: 5 | RNVC: 9
999/9/38392: RNCC: 7 | RNVC: 2

25 Apr 1991

5340-99-736-3817
Strap Assembly

997363817
01155-2-01322-01298-FL-12IN.-OL-: RNCC: 3 | RNVC: 1
01155-2-01322-01298: RNCC: 5 | RNVC: 1

19 Sep 1994

5340-99-235-4236
Mounting Plate

992354236
P-530651-009: RNCC: 3 | RNVC: 2
P530651-009: RNCC: 5 | RNVC: 2
000L3-123: RNCC: 6 | RNVC: 9

28 Mar 2000

5340-99-350-3268
Electrical-Mec Post

993503268
TP1/7/25/M3/II: RNCC: 3 | RNVC: 2
98325300: RNCC: 5 | RNVC: 2
DRAWING NUMBER RA983.253.00A: RNCC: 5 | RNVC: 2
TP1/7/25/M3/II M3X25 MM L0NG: RNCC: 6 | RNVC: 9

19 Apr 1994

5340-99-721-4891
Spring Tension Clip

997214891
CONVOLEX AR7/16": RNCC: 3 | RNVC: 2
11A4/114095/3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-052-2470
Mounting Bracket

990522470
3350010R1: RNCC: 3 | RNVC: 2
FJ980810001: RNCC: 6 | RNVC: 9

20 May 1998

5340-99-553-7719
Block Clamp

995537719
110087SHT169: RNCC: 3 | RNVC: 2
26VC21894: RNCC: 6 | RNVC: 9

16 Jan 2002

5340-99-460-3866
Detent Plunger

994603866
7512: RNCC: 3 | RNVC: 2

21 Oct 2011

5340-99-522-7828
Headless Straight Rod

995227828
FV3002620: RNCC: 3 | RNVC: 2

26 Jul 1989

5340-99-147-1434
Mortise Latch

991471434
072/9136: RNCC: 3 | RNVC: 2

19 Jul 1994

5340-99-254-4234
Mounting Bracket

992544234
3822M001: RNCC: 3 | RNVC: 2
02/101656: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-547-9199
Mounting Bracket

995479199
IM3261: RNCC: 3 | RNVC: 2

23 Jan 1995

5340-99-337-1546
Mounting Bracket

993371546
FV2293422: RNCC: 3 | RNVC: 2

22 Apr 2009

5340-99-335-5053
Padlock

993355053
A30ILS: RNCC: 3 | RNVC: 2
NPPOTSAPADLOCKS: RNCC: 6 | RNVC: 9
NPPOTSA1D1: RNCC: 6 | RNVC: 9

17 Jun 2002

5340-99-355-4788
Bracket Assy

993554788
M5755180200100: RNCC: 3 | RNVC: 2

16 Apr 2011

5340-99-256-3754
Angle Bracket

992563754
50043726: RNCC: 3 | RNVC: 2

24 May 2012

5340-99-075-8324
Insert

990758324
P1394: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-99-406-8003
Nonmetallic Bumper

994068003
P-080603-051: RNCC: 3 | RNVC: 2
P080603-051: RNCC: 5 | RNVC: 2

16 Aug 1999

5340-99-742-5039
Electrical-Mec Post

997425039
3892/73438: RNCC: 3 | RNVC: 2
A3892/73438: RNCC: 5 | RNVC: 2
3892/73438: RNCC: 5 | RNVC: 9
A3892/73438: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-767-0621
Angle Bracket

997670621
WG1381-8565-04101: RNCC: 3 | RNVC: 2
WG1381-8565 ITEM 1: RNCC: 5 | RNVC: 2
WG1381-8565-041: RNCC: 5 | RNVC: 2

12 Feb 1996

5340-99-477-2874
Headless Straight Rod

994772874
SST/Y/520/52/E001/000/003/212: RNCC: 3 | RNVC: 2
001294587/003/212: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-840-0795

5340-99-838-9346
Clip

5340-99-840-2934
Strapping

5340-99-615-8958
Mounting Plate

996158958
50006925: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-99-203-6579
Resilient Mount

992036579
137053: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-333-3073
Loop Clamp

993333073
FCH C168: RNCC: 3 | RNVC: 2
ND8898: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-99-437-7217
Loop Clamp

994377217
GMB25218B: RNCC: 3 | RNVC: 9
40680352AB: RNCC: 5 | RNVC: 9
17BB2190: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-519-2003
Retaining Clip

995192003
FV 2140728: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-99-301-9813
Bow Handle

993019813
061217: RNCC: 3 | RNVC: 2
RR22120: RNCC: 5 | RNVC: 9

7 Jul 1997

5340-99-538-0256
Retaining Strap

995380256
NM63810: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-083-3103
Mounting Catch

990833103
WKL 2271: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-99-429-1407
Section Block Clamp

994291407
110016-11515: RNCC: 3 | RNVC: 2
26VC22333: RNCC: 6 | RNVC: 9

18 Jan 2002

5340-99-720-4205
Mounting Bracket

997204205
271451004134: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-99-427-2218
Retaining Strap

994272218
BR12006: RNCC: 3 | RNVC: 2
BR12006: RNCC: 5 | RNVC: 9
36VV15848: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-663-9077
Manual Control Lever

996639077
110679-615: RNCC: 3 | RNVC: 2
110679-615: RNCC: 5 | RNVC: 9
110679-615: RNCC: 6 | RNVC: 9
XP98PA01125: RNCC: 6 | RNVC: 9

16 Jan 1998

5340-99-599-1061
Retaining Strap

995991061
POG116725: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-99-615-0966
Hinge Bracket

5340-99-441-9437

5340-99-434-1793

5340-99-219-1501
Bow Handle

5340-99-410-2623
Retaining Strap

994102623
NO PRIMARY REF 99-410-2623: RNCC: 3 | RNVC: 2
2860-10: RNCC: 5 | RNVC: 2
5815-99N31-2494: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-347-9184
Shim

993479184
EU0905G012-255: RNCC: 3 | RNVC: 2
06241-107: RNCC: 6 | RNVC: 9

22 Mar 2006

5340-99-515-8152
Access Cover

995158152
WG1397-0051-106: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-99-985-2142
Bar Latch

999852142
NO PRIMARY REF 99-985-2142: RNCC: 3 | RNVC: 2
FD75024: RNCC: 5 | RNVC: 2
C57670T279898: RNCC: 6 | RNVC: 9

25 Jun 2002

5340-99-641-0568
Mounting Bracket

996410568
WG0188-5448-049: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-349-5524
Adaptor

993495524
E018-679637: RNCC: 3 | RNVC: 2
8047503976403: RNCC: 5 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
K469 679637: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9

6 Jan 1997

5340-99-990-6762
Access Cover

999906762
110004-3345: RNCC: 3 | RNVC: 2
26VC-14265: RNCC: 6 | RNVC: 9

9 Feb 2002

5340-99-946-1774
Screwed Spacer

999461774
NO PRIMARY REF 99-946-1774: RNCC: 3 | RNVC: 2
16-21946: RNCC: 5 | RNVC: 2
16-21946: RNCC: 5 | RNVC: 2

12 Jul 1979

5340-99-933-2250
Mounting Plate

999332250
S525341: RNCC: 3 | RNVC: 2
5340-99N06-4452: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-974-2771
Mounting Bracket

999742771
421-450-067: RNCC: 3 | RNVC: 2

7 Aug 2009

5340-99-955-3087
Spring Tension Clip

999553087
C1: RNCC: 3 | RNVC: 2
A55258-292: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-952-5652
Rim Clenching Clamp

999525652
NO PRIMARY REF 99-952-5652: RNCC: 3 | RNVC: 2
E509A: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-993-9188
Hinge

999939188
WG1381-0384-109: RNCC: 3 | RNVC: 2

30 Sep 2002

5340-99-613-5045
Access Cover

996135045
264-2521: RNCC: 3 | RNVC: 2
50027991: RNCC: 5 | RNVC: 2

26 May 2010

5340-99-233-1359
Protection Bellows

992331359
AH-125426-1: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-766-7804
Mounting Plate

997667804
229-014209: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-109-7481
Retaining Clip

991097481
A104-08: RNCC: 3 | RNVC: 2
A422: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-222-5421
Spring Tension Clip

992225421
A30-4995-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-971-1412
Mechanical Stop

999711412
80-06-32-7001: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-641-4920
Angle Bracket

996414920
WG1381-1017-103: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-301-8967
Mending Plate

993018967
5291482: RNCC: 3 | RNVC: 2

13 May 2011

5340-99-554-3071
Loop Clamp

995543071
72MZ682: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-617-8690
Dust And Moisture Seal Protective Cover

996178690
115079SHT171: RNCC: 3 | RNVC: 2
115079SHT171: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-617-5210
Dust And Moisture Seal Protective Cover

996175210
AX57934: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-376-1920
Cover

993761920
42535500: RNCC: 3 | RNVC: 2

3 May 2011

5340-99-424-5523
Access Cover

994245523
C220293: RNCC: 3 | RNVC: 2
C220293: RNCC: 5 | RNVC: 9
26FX8949: RNCC: 6 | RNVC: 9
26FX8949: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-581-5805
Dust And Moisture Seal Protective Plug

995815805
7111720361: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-99-979-2215
Crank Handle

999792215
C-46046: RNCC: 3 | RNVC: 2
20711787: RNCC: 5 | RNVC: 2
20711788: RNCC: 5 | RNVC: 2
CV136412: RNCC: 5 | RNVC: 2

11 Apr 2008

5340-99-461-4991
Mounting Plate

994614991
FV2281475: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-99-823-1246
Loop Clamp

5340-99-816-8884

5340-99-812-6334

5340-99-421-9968
Retaining Strap

994219968
BA76309: RNCC: 3 | RNVC: 2
36VV16069: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-679-9529
End Shank

996799529
165.0.034: RNCC: 3 | RNVC: 2
CV138092: RNCC: 5 | RNVC: 2

9 Dec 2013

5340-99-258-1661
End C Marker Washer

992581661
BLR6456B: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-99-339-4083
Plate

993394083
7L34/MK4/P18: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-947-6145
Spacing Threaded Standoff

999476145
17-59073: RNCC: 3 | RNVC: 2
17-59073: RNCC: 5 | RNVC: 2

14 Dec 1978

5340-99-946-7573
Retaining Strap

999467573
5CA72755: RNCC: 3 | RNVC: 2
5CA72755: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-949-3898
Bail Handle

999493898
SDA157220: RNCC: 3 | RNVC: 2
MR16928: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-947-7108
Angle Bracket

999477108
17-55805: RNCC: 3 | RNVC: 2
17-55805: RNCC: 5 | RNVC: 2

25 Aug 1978

5340-99-952-1193
Webbing Strap

999521193
16-42305: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-808-1016
Blood Bottle T Hook

5340-99-618-1913
S Threaded Standoff

5340-99-632-7247
Nut A Locking Plate

5340-99-147-9560
Angle Bracket

991479560
QB11063: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-99-543-3441
Dust And Moisture Seal Protective Cap-Plug

995433441
APR5: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-559-0881
Clamp Block

995590881
218259: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-6628
Corrosion Preventive Anode

991476628
H9 ANODE: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-99-931-3121

5340-99-970-3786

5340-99-926-4152

5340-99-930-8225
Packing

5340-99-930-7979
Diaphragm Follower

5340-99-924-4106

5340-99-923-9369

5340-99-968-8008
Mounting Bracket

5340-99-968-2574
Mechanical Interloc

5340-99-913-2213
Shim

5340-99-913-5777

5340-99-913-4392

5340-99-913-4328
Packing Piece

5340-99-108-7071
Dust And Moisture Seal Protective Cover

991087071
EU11113: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-147-6605
Runner

991476605
101005-7515-ASY: RNCC: 3 | RNVC: 2
TLAM1A2: RNCC: 6 | RNVC: 9

2 Jul 2003

5340-99-562-7643
Dust And Moisture Seal Protective Cap

995627643
NJT015: RNCC: 3 | RNVC: 2
SW435P: RNCC: 6 | RNVC: 9

7 Sep 1993

5340-99-148-1464
Pivot

991481464
A1010148: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-99-664-7916
Loop Clamp

996647916
51SS4490: RNCC: 3 | RNVC: 2
26DC12430: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-024-8583
Angle Bracket

990248583
2040901: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-724-4429
Single Flat Hook

997244429
SE002310: RNCC: 3 | RNVC: 2

4 Oct 2005

5340-99-341-3880
Hand Crank

993413880
SA2577: RNCC: 3 | RNVC: 2
4A69880: RNCC: 5 | RNVC: 2

19 Nov 1993

5340-99-593-9094
Blank Panel

995939094
EWAD305125: RNCC: 3 | RNVC: 2

1 Feb 2013

5340-99-212-9370
Retaining Strap

992129370
G3 400 103 1501 DT: RNCC: 3 | RNVC: 2
23.44459PG: RNCC: 6 | RNVC: 9

16 May 2006

5340-99-179-7406
Buckle

991797406
0520: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-99-997-9022
Protective Cover As

999979022
83202612: RNCC: 3 | RNVC: 2
GM-D-50573 ITEM 14: RNCC: 5 | RNVC: 2
GM-D-50573/14: RNCC: 5 | RNVC: 2
0346A-050: RNCC: 6 | RNVC: 9
0346A-054: RNCC: 6 | RNVC: 9
995512471: RNCC: 6 | RNVC: 9

1 Dec 2003

5340-99-843-9310
Catch Strike

998439310
AA-2385-276: RNCC: 3 | RNVC: 2

16 May 2013

5340-99-463-5960
Loop Clamp

994635960
RK19751: RNCC: 3 | RNVC: 2
85-101-2815: RNCC: 6 | RNVC: 9

12 Jun 1995

5340-99-421-8835
Monitor Stand Base

994218835
90672/3/3: RNCC: 3 | RNVC: 2
A1/90672/3/3: RNCC: 5 | RNVC: 2

2 Dec 1991

5340-99-376-1820
Safety Cable Kit

993761820
AS63237-1: RNCC: 2 | RNVC: 2
074X6-038: RNCC: 6 | RNVC: 9

15 Jul 2005

5340-99-410-4326
Actuating Arm

994104326
NO PRIMARY REF 99-410-4326: RNCC: 3 | RNVC: 2
LONG STRAIGHT 117MM O/LG: RNCC: 5 | RNVC: 2

20 Jan 2011

5340-99-994-7044
Retainer Plate

999947044
00-1092-1008: RNCC: 3 | RNVC: 2

26 Oct 1999

5340-99-975-9658
Retaining Strap

999759658
110045-2829: RNCC: 3 | RNVC: 2
26VC-12546: RNCC: 6 | RNVC: 9

18 Feb 2002

5340-99-667-9525
Truss Joint

996679525
NO PRIMARY REF 99-667-9525: RNCC: 3 | RNVC: 2
HNS-MCU-30M-A-TRUSS-JOINTS-ALU: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-99-665-0203
Mounting Bracket

996650203
3645E003: RNCC: 3 | RNVC: 2
1413/0914: RNCC: 5 | RNVC: 2

10 May 2001

5340-99-792-9440
Runner

997929440
PT6036-2-703186: RNCC: 3 | RNVC: 2
640/2/25488: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-513-3233
Handle Assembly

995133233
254046: RNCC: 3 | RNVC: 2
CT605K ITEM 1-10: RNCC: 5 | RNVC: 2
CT605K/1-10: RNCC: 5 | RNVC: 2
012KJ-029: RNCC: 6 | RNVC: 9

3 Oct 2001

5340-99-765-2036
Rod End Clevis

997652036
FHQ6200-5-30: RNCC: 3 | RNVC: 2
FHQ6200-30-5: RNCC: 5 | RNVC: 2
FHQ6200-30: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-99-862-3050
Mounting Bracket

998623050
FV 2156933: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-99-463-8937
Access Cover

994638937
0000574M: RNCC: 3 | RNVC: 2
CV180515: RNCC: 5 | RNVC: 2

12 Jul 2011

5340-99-411-9839
Butt Hinge Leaf

994119839
200H1NGE: RNCC: 3 | RNVC: 2
0251-17730: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-587-4028
Bracket

995874028
M5755496420000: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-99-864-5360
Mounting Bracket

998645360
38855: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-99-654-5681
Engine Accessory Bracket

996545681
77880746: RNCC: 3 | RNVC: 2
77880746: RNCC: 8 | RNVC: 2

25 Apr 1991

5340-99-653-5002
Webbing Strap

996535002
NCK225: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-213-2509
Mounting Bracket

992132509
LOT84179: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-99-452-0818
Retaining Strap

994520818
FV 2194094: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-99-523-0630
Rim Lock Key

995230630
FK4: RNCC: 3 | RNVC: 1
D6145401TEM4: RNCC: 5 | RNVC: 2
FK4WE: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-415-0813
Mounting Bracket

994150813
FV 2240619: RNCC: 3 | RNVC: 2

9 Jan 2004

5340-99-523-0652
Rim Lock

995230652
FS2: RNCC: 3 | RNVC: 1
D6145401TEM34: RNCC: 5 | RNVC: 2
D6145401TEM46: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-451-9244
Mounting Bracket

994519244
AIR135400: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-99-538-4279
Loop Clamp

995384279
8105001053: RNCC: 3 | RNVC: 2
810-500-1053: RNCC: 5 | RNVC: 2
TE15: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-711-4797
Access Cover

997114797
25ES443A: RNCC: 3 | RNVC: 2
26TD-4205: RNCC: 6 | RNVC: 9
26TD4205: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-459-5960
Mounting Bracket

994595960
25-2CF-21A: RNCC: 3 | RNVC: 2
26TD-2187: RNCC: 6 | RNVC: 9
26TD2187: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-553-9807
Dust And Moisture Seal Protective Cap

995539807
EA2502V182-002: RNCC: 3 | RNVC: 2
137JQ-0002: RNCC: 6 | RNVC: 9

27 Sep 2013

5340-99-341-8235
Plug

993418235
169049: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
H455-3532: RNCC: 6 | RNVC: 9

26 Apr 1996

5340-99-814-3969
Dust And Moisture Seal Protective Cap

998143969
M-8-VCO-4-BLWDFL/AST: RNCC: 3 | RNVC: 1
QCA/M-8-VCO-4-BLWDFL/AST: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-99-760-4611
Butt Hinge

997604611
A-211227-407: RNCC: 3 | RNVC: 2
A211227-407: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-207-8521

5340-99-215-8875
Filter Element

5340-99-215-3440

5340-99-431-4812

5340-99-219-2509
Dus Protective Plug

5340-99-215-4390
Gudgeon Pin Housing

5340-99-413-0431

5340-99-200-7253

5340-99-701-9848

5340-99-635-6950
Angle Bracket

996356950
C035041: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-773-8196

5340-99-658-7797

5340-99-713-2391

5340-99-653-7645
Spring Tension Clip

5340-99-593-1843
Breech Asse Bracket

995931843
2EFML66514: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-182-6309
Rod End Clevis

991826309
555110400: RNCC: 3 | RNVC: 2
CV130483: RNCC: 5 | RNVC: 2

1 Nov 2013

5340-99-215-6719
Mounting Plate

992156719
FV 2063297: RNCC: 3 | RNVC: 2
FV 2063297: RNCC: 5 | RNVC: 2

5 Oct 1996

5340-99-151-7883
Mounting Plate

991517883
332/F3762: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-99-894-0169
Catch Strike

998940169
0034357000: RNCC: 3 | RNVC: 2
34357000: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-958-6546
Bracket Assy

999586546
M5725530300000: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-99-859-8396
Bracket Assy

998598396
M5725456100000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-895-2520
Mounting Bracket

998952520
61284: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-99-840-2906
Indexing Plate

998402906
2KSM10F12: RNCC: 3 | RNVC: 2
FF952M20081: RNCC: 6 | RNVC: 9

10 Oct 1995

5340-99-702-1920
Access Cover

997021920
14537164: RNCC: 3 | RNVC: 2
CV186358: RNCC: 5 | RNVC: 2
VOE14537164: RNCC: 5 | RNVC: 2

3 Jun 2011

5340-99-958-3538
Multiple Angle Bracket

999583538
25073028: RNCC: 3 | RNVC: 2
A2N25073028: RNCC: 5 | RNVC: 2

23 Jun 2009

5340-99-861-9603
Fixing Kit

998619603
BR8472: RNCC: 3 | RNVC: 1
DNA225: RNCC: 6 | RNVC: 9
DNA225: RNCC: 6 | RNVC: 9

4 Jan 1996

5340-99-938-2165
Double Angle Bracket

999382165
FV 2202137: RNCC: 3 | RNVC: 2

15 Apr 1994

5340-99-862-3365
Mounting Bracket

998623365
AS073729: RNCC: 3 | RNVC: 2
FH980430192: RNCC: 6 | RNVC: 9

23 Jun 1998

5340-99-916-4207
Bracket

999164207
M5725530420100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-641-9077
General Purpose Resilient Mount

996419077
GB248 1EU: RNCC: 3 | RNVC: 2

13 Jun 1991

5340-99-859-8290
Mounting Bracket

998598290
7650113: RNCC: 3 | RNVC: 2
070520113: RNCC: 5 | RNVC: 2
70520113: RNCC: 6 | RNVC: 9

7 Sep 2011

5340-99-881-4133
Access Cover

998814133
W153584: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-334-6068
Latch Bar

993346068
2EFMC60027: RNCC: 3 | RNVC: 2
061MW-166: RNCC: 6 | RNVC: 9

26 Aug 2005

5340-99-147-9864
Mounting Plate

991479864
6M4FS31903ND: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-99-147-8689
Handle Grip

991478689
CBD20070P60: RNCC: 3 | RNVC: 2

24 May 2005

5340-99-315-0221
Webbing Strap

993150221
CMA3M: RNCC: 3 | RNVC: 2
PN00000551: RNCC: 5 | RNVC: 2

3 Aug 2011

5340-99-517-4168
Loop Clamp

995174168
FV 2143625: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-99-663-6414
Azimuth Mount

996636414
RTZ20U: RNCC: 3 | RNVC: 2
RTAZ1: RNCC: 5 | RNVC: 2

5 Mar 1997

5340-99-626-5619
Bow Handle

996265619
3AB15343: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-424-4943
Access Cover

994244943
B185817: RNCC: 3 | RNVC: 2
B185817: RNCC: 5 | RNVC: 9
26FX595: RNCC: 6 | RNVC: 9
26FX595: RNCC: 6 | RNVC: 9

15 Oct 1979

5340-99-241-8096
Bracket

992418096
M5725531900100: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-458-4983
Cable Channel

994584983
254 0095-801: RNCC: 3 | RNVC: 2
254 0095-801: RNCC: 5 | RNVC: 2

26 Aug 2003

5340-99-874-0383

5340-99-950-4620

5340-99-866-3553
Tensioning Tie Rod

5340-99-102-7032

5340-99-866-3552
Retaining Band Pin

5340-99-427-7894
Plug

5340-99-863-5819
Access Cover

5340-99-101-9975

5340-99-865-8509

5340-99-659-9434
Mounting Bracket

996599434
P-730643-003: RNCC: 3 | RNVC: 2
P730643-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-761-2709
General Purpose Resilient Mount

997612709
3-2045: RNCC: 3 | RNVC: 2
3/2045-00: RNCC: 5 | RNVC: 2
0034108200: RNCC: 5 | RNVC: 2
341082: RNCC: 5 | RNVC: 2
34108200: RNCC: 5 | RNVC: 2
0034108200: RNCC: 5 | RNVC: 2
0034108200: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-646-0517
Mounting Bracket

996460517
638002629: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-119-0558
Loop Clamp

991190558
816036: RNCC: 3 | RNVC: 2
BA816036: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-113-5554
Loop Clamp

991135554
U450151: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-370-9752
Double Angle Bracket

993709752
157046: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-99-676-5276
Tube Clamp

996765276
46219: RNCC: 3 | RNVC: 2

6 Feb 2007

5340-99-195-5973
Swivel Caster

991955973
PBCA12: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-153-4955
Angle Bracket

991534955
FV2315357: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-99-427-2617
Retaining Strap

994272617
BR10088: RNCC: 3 | RNVC: 2
BR10088: RNCC: 5 | RNVC: 9
36VV15770: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-424-1922
Access Cover

994241922
C200861: RNCC: 3 | RNVC: 2
C200861: RNCC: 5 | RNVC: 9
26FX5818: RNCC: 6 | RNVC: 9
26FX5818: RNCC: 6 | RNVC: 9

15 Oct 1979

5340-99-463-0449
Dust Cap Assembly

994630449
1503007: RNCC: 3 | RNVC: 2

9 May 2000

5340-99-197-1042
Mounting Bracket

991971042
31211A16: RNCC: 3 | RNVC: 2
31211A16: RNCC: 5 | RNVC: 9

21 Apr 1995

5340-99-889-8566
Caster Wheel

998898566
332/A4551: RNCC: 1 | RNVC: 2
199956: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-99-768-8626
Mount Rubber

5340-99-772-6567
Loop Clamp

5340-99-715-6595

5340-99-710-5167
Detent Plunger

997105167
NM83627: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-601-7536
Protection Bellows

996017536
BA 7124: RNCC: 3 | RNVC: 2

25 Jan 1994

5340-99-641-7834
Compression Cup

996417834
JW160732 ISSUE A: RNCC: 3 | RNVC: 2
RAB3959: RNCC: 5 | RNVC: 2
RO-A3-44733: RNCC: 5 | RNVC: 2
R0-A1-44733: RNCC: 5 | RNVC: 2
160732: RNCC: 5 | RNVC: 2
JW160732 ISSUE A: RNCC: 5 | RNVC: 9
160732: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-391-1518
Headless Straight Rod

993911518
G414/4779/3: RNCC: 3 | RNVC: 2
G414/4779 ITEM 3: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-99-590-1610
Mounting Plate

995901610
OE-B-11601: RNCC: 3 | RNVC: 2

4 Sep 2012

5340-99-618-5178
Screw Thread Insert

996185178
1185-04CNPX0-1121N: RNCC: 3 | RNVC: 2
PF45091-1: RNCC: 5 | RNVC: 2
ST14355: RNCC: 5 | RNVC: 2
999-4-01132-011: RNCC: 5 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-370-9166
Manual Control Lever

993709166
BL200CR: RNCC: 3 | RNVC: 2
B2197: RNCC: 5 | RNVC: 2

8 Apr 1992

5340-99-809-5864
Handwheel

998095864
31691: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-812-4288
Helical Compression Spring Seat

998124288
PGT75717A: RNCC: 3 | RNVC: 2
PG75717A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-804-7427
Dust Protective Cap

998047427
ACA9756: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-535-4949
Filler Opening Cap

995354949
UP1963: RNCC: 3 | RNVC: 2

13 Sep 1994

5340-99-538-4061
Loop Clamp

995384061
P609003: RNCC: 3 | RNVC: 2
S5013301: RNCC: 5 | RNVC: 2
8105013301: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-663-5823
Mounting Bracket

996635823
2EFMR66537: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-99-980-9061

5340-99-953-9902

5340-99-991-1288
Spigot

5340-99-991-0038
Canister Insert

5340-99-983-0546
Access Cover

5340-99-424-3385
Rod End Clevis

994243385
A193449: RNCC: 3 | RNVC: 2
A193449: RNCC: 5 | RNVC: 9
26FX6364: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-215-1863
Access Cover

992151863
3583631701: RNCC: 3 | RNVC: 2
3583631701: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-99-226-6323
Medium Inner Module

992266323
DPA1032: RNCC: 3 | RNVC: 2
DPA1032: RNCC: 5 | RNVC: 2
DPA1032: RNCC: 5 | RNVC: 2
011ZZLE67: RNCC: 6 | RNVC: 9

15 Aug 2001

5340-99-464-2056
End Connection Asse

994642056
9901602: RNCC: 3 | RNVC: 2

26 Nov 2001

5340-99-773-1476
Hinge Bracket

997731476
P-870147-001: RNCC: 3 | RNVC: 2
P870147-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-416-6070
Block Fairlead

994166070
EA1-73-205: RNCC: 3 | RNVC: 2
26FZ-828: RNCC: 6 | RNVC: 9
26FZ828: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-419-7263
Loop Clamp

994197263
EEAS143-23: RNCC: 3 | RNVC: 2
26FZ-17529: RNCC: 6 | RNVC: 9
26FZ17529: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-661-7389
Clip Retainer Plate

996617389
PT4922-2-700038: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-418-8894

5340-99-413-0935

5340-99-327-4330
Manual Control Lever

993274330
077MT1234S22: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-99-120-2379
Resilient Mount

991202379
MDFM12: RNCC: 3 | RNVC: 2
WT45872: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-027-2581
Release Lever

990272581
3OWE155890: RNCC: 3 | RNVC: 2

28 Nov 1990

5340-99-016-1077
Support

990161077
6930232: RNCC: 3 | RNVC: 2
FF9530C0041: RNCC: 6 | RNVC: 9

9 May 1995

5340-99-221-1980
Retaining Strap

992211980
041619: RNCC: 3 | RNVC: 2
041619: RNCC: 3 | RNVC: 9
V041619: RNCC: 5 | RNVC: 2
V041619: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-220-8912
Catch Strike

992208912
SDA203623: RNCC: 3 | RNVC: 2
SDA203623: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-148-2088
Nonmetallic Bushing

991482088
MBEU40981: RNCC: 3 | RNVC: 2
AMBEU40981: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-453-9503
Handle Grip

994539503
RNL101: RNCC: 3 | RNVC: 2
61BY11391: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-382-4341
Access Cover

993824341
070-858: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-99-251-6672
Housin Knob Bracket

992516672
3513 132 7604: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-789-5542
Dust And Moisture Seal Protective Plug

997895542
BT01358: RNCC: 3 | RNVC: 2
3513 900 2052: RNCC: 5 | RNVC: 2
5322 462 41639: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-331-1896
Runner

993311896
10-70-788: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-99-496-0472
Loop Clamp

5340-99-328-9644
Manual Control Lever

993289644
561/2/28029/000: RNCC: 3 | RNVC: 2

8 May 2006

5340-99-605-2801
Loop Clamp

996052801
SST/Y/270/00/S001/142 SHEET 001-: RNCC: 3 | RNVC: 1
001293530: RNCC: 5 | RNVC: 1
001293530 PART 142: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000 PART 142: RNCC: 5 | RNVC: 1
001293530/142: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/000/142: RNCC: 5 | RNVC: 1
SST/Y/270/00/S001/142: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-665-3097
T Bracket

996653097
205-038490: RNCC: 3 | RNVC: 2
638/RS/23116: RNCC: 6 | RNVC: 9

14 Jun 2001

5340-99-667-9701
Access Cover

996679701
0311/019: RNCC: 3 | RNVC: 2

4 May 2011

5340-99-167-5258
Multiple Angle Bracket

991675258
K527134: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-99-051-1164
Webbing Strap

990511164
491108: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-350-8988
Mounting Bracket

993508988
PE22356: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-99-423-9269
Access Cover

994239269
107501TEM44: RNCC: 3 | RNVC: 2
569128: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-392-2018
Blanking Plate Asse

993922018
S3S21257000: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-99-336-6774
Acceleromet Bracket

993366774
0693D30005-101: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-99-635-5467
Bail Handle

996355467
SDB232727: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-325-2517
Cap

5340-99-147-1862
Mounting Bracket

991471862
HH3/MV4484: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-99-349-6716

5340-99-405-6956

5340-99-782-8446
Retaining Strap

997828446
CE5/SS4234: RNCC: 3 | RNVC: 2

3 Jun 1993

5340-99-330-2430
Loop Clamp

993302430
FV 2264378: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-99-424-3397
Loop Clamp

994243397
STD8511TEM47: RNCC: 3 | RNVC: 2
STD8511TEM47: RNCC: 5 | RNVC: 9
26FX4038: RNCC: 6 | RNVC: 9
26FX4038: RNCC: 6 | RNVC: 9

7 Feb 1990

5340-99-638-7651
Butt Hinge

996387651
820890: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-777-7650
Mounting Bracket

997777650
FV2257952: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-99-778-3740
Nonmetallic Solid Wheel

997783740
FV3001568: RNCC: 3 | RNVC: 2
FV3001568: RNCC: 5 | RNVC: 2

20 Aug 1987

5340-99-771-6714
Manual Control Lever

997716714
5895: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-777-7298
Mounting Plate

997777298
FV2228087: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-99-774-1340
Mechanic Equipment Hardware Kit

997741340
3755: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-99-778-8051
Ladder Stow Bracket

997788051
FV652389: RNCC: 3 | RNVC: 2
FV652389: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-776-6985
Retaining Strap

997766985
JRB4756: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-773-7910
Nonmetallic Solid Wheel

997737910
085 PTJC: RNCC: 3 | RNVC: 2
739327 A3: RNCC: 5 | RNVC: 2
ASWE 739327 A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-776-9315
Access Cover

997769315
U203058U: RNCC: 3 | RNVC: 2
100U203058U: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-785-0155
Cushioning Pad

997850155
C072176: RNCC: 3 | RNVC: 2
100C072176: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-777-0897
Mounting Plate

997770897
01TV14731: RNCC: 3 | RNVC: 2
01TV14731: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-330-1035
Mount A V

5340-99-395-9369
Nut A Locking Plate

5340-99-824-0967
Tail P Support Clip

5340-99-748-6835

5340-99-865-4462

5340-99-562-2069
Bumper

995622069
FV 2207619: RNCC: 3 | RNVC: 2

8 Jun 1999

5340-99-789-6652
Mounting Bracket

997896652
L06609100: RNCC: 3 | RNVC: 2
L06609000 ITEM 2: RNCC: 5 | RNVC: 2
L06609000/2: RNCC: 5 | RNVC: 2

8 Aug 2007

5340-99-758-1298
Hinge

997581298
MQC1/6-90R: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-250-2240
Mounting Bracket

992502240
202-055959 ISSUE 1: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-99-170-5174
Mounting Plate

991705174
G101/5646/6: RNCC: 3 | RNVC: 2
G101/5646 ITEM 6: RNCC: 5 | RNVC: 2

13 Dec 2001

5340-99-374-5810
Handrail Bracket

993745810
4/74/1000: RNCC: 3 | RNVC: 2
4T11525: RNCC: 6 | RNVC: 9

23 Aug 2005

5340-99-254-9439
Double Angle Bracket

992549439
5300-2091: RNCC: 3 | RNVC: 2
5300-2057 ITEM 4: RNCC: 5 | RNVC: 2

5 Mar 2012

5340-99-951-6618
Rim Clenching Clamp

999516618
NO PRIMARY REF 99-951-6618: RNCC: 3 | RNVC: 2
614-2-01183: RNCC: 5 | RNVC: 2

3 Oct 1978

5340-99-219-7062
Access Cover

992197062
P-780021-055: RNCC: 3 | RNVC: 2
P780021-055: RNCC: 5 | RNVC: 2

22 Nov 2007

5340-99-581-0849
Hasp Staple

995810849
1594: RNCC: 3 | RNVC: 2
5519-083 SHEET 2/6: RNCC: 5 | RNVC: 2
090038: RNCC: 5 | RNVC: 2
5519-083 SHEET ITEM 6: RNCC: 5 | RNVC: 2

27 Sep 2007

5340-99-782-8895
General Purpose Resilient Mount

997828895
13/Y/552/0060/M005/000: RNCC: 3 | RNVC: 2
001207308: RNCC: 5 | RNVC: 1

25 Apr 1991

5340-99-269-1601
Detent Plunger

992691601
MBEU171164: RNCC: 3 | RNVC: 2
MBEU171164: RNCC: 5 | RNVC: 2

25 Jun 2002

5340-99-797-9304
Strap Retaining Ass

997979304
100563-2003-ASY: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-359-4651
Webbing Strap

993594651
PN00000999: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-99-881-0129
Dust And Moisture Seal Protective Cap

998810129
MC3003: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-99-878-9919
Access Cover

998789919
FV2308943: RNCC: 3 | RNVC: 2

18 May 2011

5340-99-858-9168
Access Cover

998589168
FV2265155: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-99-796-6386
Electrical-Mec Post

997966386
C070821: RNCC: 3 | RNVC: 2
100C070821: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-702-6597
Key

997026597
14227847: RNCC: 3 | RNVC: 2
980E70011: RNCC: 6 | RNVC: 9

21 Jul 1998

5340-99-799-9059
Access Cover

997999059
U20155702: RNCC: 3 | RNVC: 2
103U20155702: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-614-5348
Dust And Moisture Seal Protective Cap-Plug

996145348
A1754: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-865-2906
General Purpose Resilient Mount

998652906
FV143252: RNCC: 3 | RNVC: 2
RE19034: RNCC: 5 | RNVC: 2
61BU16026: RNCC: 6 | RNVC: 9
LV10FV143252: RNCC: 6 | RNVC: 9
0821RRRE19034: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-866-4475
Resilient Mo Sleeve

998664475
FV478158: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-863-6255
Mounting Bracket

998636255
AMP 10 00 11000: RNCC: 3 | RNVC: 2

9 Jun 2009

5340-99-866-7127
Nut And Bolt Retainer

998667127
FV 148954: RNCC: 3 | RNVC: 2
CK345: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-867-3686
Synchro Clamp

998673686
FV 473186: RNCC: 3 | RNVC: 2
04.01.3A.1365 W3: RNCC: 5 | RNVC: 2
SK66 FK0537B: RNCC: 5 | RNVC: 2
FV 473186: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-865-4683
Loop Clamp

998654683
FV143819: RNCC: 3 | RNVC: 2
RE19859: RNCC: 5 | RNVC: 2
LV10FV143819: RNCC: 6 | RNVC: 9
61BU10665: RNCC: 6 | RNVC: 9

14 Mar 1991

5340-99-866-7157
Access Cover

998667157
FV149376: RNCC: 3 | RNVC: 2
CK416: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-874-0761
Door Handle

998740761
6341694: RNCC: 3 | RNVC: 2
LV7BD6341694: RNCC: 6 | RNVC: 9

25 Apr 1991

Load More Results