What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Fusible Plug?

A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

Hardware, Commercial - United Kingdom (UK)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United Kingdom (UK) - NCB is 99

Page 107 of 368

NSN Format for Hardware, Commercial
Codified by United Kingdom

53	40	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United Kingdom (UK)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 31 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 331 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 386 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 103 Items
What is a Compression Cup? 76 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 425 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 16 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 2146 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 356 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 148 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 31 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 4317 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 114 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 424 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 70 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 15 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 32 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 13 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Door Hook And Eye? 10 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 54 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 27 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 25 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 100 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 10 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is a Friction Catch? 108 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 17 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 132 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 199 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 34 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 40 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Mortise Lock Set? 28 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 55 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 32 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 42 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 316 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 137 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 35 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 43 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 159 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 137 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 96 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 31 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 58 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 56 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 16 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 166 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 554 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2459 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1284 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 600 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 228 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 15 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 155 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 86 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 62 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 196 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 303 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 36 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 5173 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 118 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 133 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 6370 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 110 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 142 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 22 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 27 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 471 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 168 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 43 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 12 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 71 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 42 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 403 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 31 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 17 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 118 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 37 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 31 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 33 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 273 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 408 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 693 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 55 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 158 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 901 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 57 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 84 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1804 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1834 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 34 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 280 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 11 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 324 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 496 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 651 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 13 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 10 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 13 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 1007 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 60 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 213 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 338 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 763 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 60 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 45 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 98 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 10 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 509 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 383 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Pawl Fastener? 25 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 41 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 5606 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 304 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 83 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 16 Items
What is an Antipilferage Seal? 49 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 373 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 308 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 27 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 175 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Fairlead? 467 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 974 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 9875 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 346 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 30 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 435 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Actuator,Mounting 12 Items
What is a Mounting Plate? 5458 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 47 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 274 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 292 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 11 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 13 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 919 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 437 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 87 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 21 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 10 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 40 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 17 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 288 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 170 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 17 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 348 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 27 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Friction Catch Housing? 11 Items: A Friction Catch Housing (HOUSING,FRICTION CATCH) is a housing designed to position and retain a CATCH, FRICTIOn. (Converted from AEUSA to General Use on 12152020)
What is a Lock Key? 111 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 52 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 23 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Dust And Moisture Seal Protective Cover? 702 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 47 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Packaging Container Fastener? 15 Items: A Packaging Container Fastener (FASTENER,PACKAGING CONTAINER) is a re-usable, two-piece fastener for securing the lid of a packaging container or like item. One part, for attachment to the lid comprises a plate with a captive screw; the other, for attachment to the container, comprises an angled plate with integral threaded boss which mates with the captive screw.
What is a Liquid Holding Unit Filler Neck? 10 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Nut And Bolt Head Protective Cap? 22 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Cover Strip? 21 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 216 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 2564 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hand Crank Arm? 25 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 13 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 14 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 56 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 19 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 33 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 27 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 37 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 310 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 893 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is an Assembled Nut Retainer? 30 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 97 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 16 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 61 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 23 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 56 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Shipping And Storage Container Twistlock? 10 Items: A Shipping And Storage Container Twistlock (TWISTLOCK,SHIPPING AND STORAGE CONTAINER) is a locking device, specifically designed to stack and lock a SHIPPING and STORAGE CONTAINER (as modified).
What is a Bumper? 800 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 107 of 368

5340-99-373-9522
Mounting Bracket

993739522
MBEU 110773: RNCC: 3 | RNVC: 2
MBEU 110773/C: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-99-453-6965
Access Cover

5340-99-450-5214
Supporti Line Strap

5340-99-453-7455
Index Plate

5340-99-198-6902
Protection Bellows

5340-99-120-1645
Retaining Strap

991201645
6CA14982: RNCC: 3 | RNVC: 2
6CA14982: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-160-4375
Spacing Threaded Standoff

991604375
222-402: RNCC: 3 | RNVC: 2

19 Jun 1997

5340-99-051-8779
Clamp

990518779
LS10682C10S: RNCC: 3 | RNVC: 2
LS10682C10S: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-99-535-4199
Clamp

995354199
5560C823: RNCC: 3 | RNVC: 2

24 Mar 2000

5340-99-553-3586
Mounting Bracket

995533586
333/S4449: RNCC: 3 | RNVC: 2

18 May 2011

5340-99-790-2895
Battery Mountin Pad

997902895
FV 2096740: RNCC: 3 | RNVC: 2
FV 2096740: RNCC: 5 | RNVC: 2

25 Mar 1992

5340-99-789-9656
Access Cover

997899656
60206184: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-99-449-3759
Screwed Plug

994493759
RU18878: RNCC: 3 | RNVC: 2
36TN1523: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-454-3607
Clenching Rim Clamp

994543607
380SPB1009A: RNCC: 3 | RNVC: 2
6TK666: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-115-0918
Nut And Bolt Locking Plate

991150918
508E6431A: RNCC: 3 | RNVC: 2
1798064: RNCC: 5 | RNVC: 2
49009: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-297-7275
Support Pillar

992977275
AMP 01 01 40001: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-99-558-9302
Rubber Bumper

995589302
KA357: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-185-5347
Hinge

991855347
HINGE 590: RNCC: 3 | RNVC: 2

17 May 2007

5340-99-194-8007
Retaining Strap

991948007
SDB210096: RNCC: 3 | RNVC: 2
SDB210096: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-207-6867
Swivel Caster

992076867
EH110SUTML: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-269-4175
Dust And Moisture Seal Protective Plug

992694175
ACC80959: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-99-051-1581
Angle Bracket

990511581
88MZ24: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-590-0044
Jointing Compound

995900044
SD16900: RNCC: 3 | RNVC: 2
SD16900: RNCC: 3 | RNVC: 9

3 Nov 2010

5340-99-320-1211
Clamping Plates Kit

993201211
AS4412: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-99-206-6760
Angle Bracket

992066760
MEXE38806: RNCC: 3 | RNVC: 2

12 Dec 1978

5340-99-480-8255
Sliding Door Track Bracket

994808255
56764: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-99-676-6296
Mounting Bracket

996766296
80022497: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-99-749-2008
Retaining Clip

997492008
91079288: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-453-7222
Loop Clamp

994537222
B293304: RNCC: 3 | RNVC: 2
36AD3522: RNCC: 6 | RNVC: 9

18 Apr 1990

5340-99-581-6857
Plate

995816857
MBEU1598GRU5: RNCC: 3 | RNVC: 2
MBEU1598GRU5: RNCC: 5 | RNVC: 2

23 May 1996

5340-99-514-9442
Connector Cap

995149442
AJ3000010620AF: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-99-757-6944
Dust And Moisture Seal Protective Plug

997576944
24381011: RNCC: 3 | RNVC: 2
FIP016010: RNCC: 5 | RNVC: 2

30 Mar 2009

5340-99-753-2047
Access Cover

997532047
L06100700: RNCC: 3 | RNVC: 2

14 Mar 2008

5340-99-755-3198
Retaining Strap

997553198
40000632: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-749-2021
Bumper

997492021
3710206: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-745-9033
Mounting Bracket

997459033
17690008: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-761-6146
Mounting Plate

997616146
FV 870343: RNCC: 3 | RNVC: 2
VP 4349: RNCC: 5 | RNVC: 2
FH9521R0028: RNCC: 6 | RNVC: 9

19 Sep 1995

5340-99-030-1332
Access Cover

5340-99-625-2180

5340-99-627-1023

5340-99-027-2690

5340-99-773-5237
Hinge Bracket

997735237
WD0542-00023-10101: RNCC: 3 | RNVC: 2
WD0542-00023-101: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-707-3154
Engine Accessory Bracket

997073154
664/1550: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-99-130-6027
Webbing Strap

991306027
UK/SC/4870: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-735-1926
Thrust Coll

997351926
F300-419197: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
1071/1/7: RNCC: 6 | RNVC: 9
F300-419197: RNCC: 6 | RNVC: 9

30 Jan 1997

5340-99-965-3519
Retaining Strap

999653519
MM3754: RNCC: 3 | RNVC: 2
FH70-4-6-1001: RNCC: 5 | RNVC: 2
04ZX0005800222: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-207-0086
Retaining Band

992070086
GM/A/46818: RNCC: 3 | RNVC: 2
OE-A-5396: RNCC: 5 | RNVC: 2
807467: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-957-6871
Spacing Threaded Standoff

999576871
NO PRIMARY REF 99-957-6871: RNCC: 3 | RNVC: 2
SOS-3.5 M3-12: RNCC: 5 | RNVC: 2

27 Mar 1998

5340-99-985-9674
Mounting Bracket

999859674
AA3153-032: RNCC: 3 | RNVC: 2
MS-3153-032: RNCC: 5 | RNVC: 2

9 May 2013

5340-99-615-3419
Retaining Strap

996153419
KB290K0032-096: RNCC: 3 | RNVC: 2
KB290K0032-096: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-324-0221
Endlock

993240221
05/1001: RNCC: 3 | RNVC: 2
05/0001001B: RNCC: 5 | RNVC: 2

8 Apr 2010

5340-99-401-8033
Loop Clamp

994018033
FV 2148331: RNCC: 3 | RNVC: 2
FV 2148331: RNCC: 5 | RNVC: 2

30 Aug 1991

5340-99-535-6710
Mounting Bracket

995356710
ESR2416: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-99-547-6604
Spring Tension Clip

995476604
FV 2158740: RNCC: 3 | RNVC: 2
FV 2158740: RNCC: 5 | RNVC: 2

19 Aug 1991

5340-99-547-9644
Body Plug

995479644
PLC 310: RNCC: 3 | RNVC: 2
FF952HP0137: RNCC: 6 | RNVC: 9

8 Sep 1995

5340-99-513-8271
Webbing Strap

995138271
FV 2193970: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-99-660-2977
Retaining Strap

996602977
FV2149880: RNCC: 3 | RNVC: 2
FV2149880: RNCC: 5 | RNVC: 2

15 May 1992

5340-99-251-3147
Ullage Gauge Assemb

992513147
F0052001: RNCC: 3 | RNVC: 2
0844695: RNCC: 5 | RNVC: 2
F52.001: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-301-8933
Mounting Bracket

993018933
FV 2207047: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-99-979-7874
Striker

999797874
1456R492: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-99-975-0379
Controls Connecting

999750379
110033SHT1285: RNCC: 3 | RNVC: 2
110033 SHT. 1285: RNCC: 5 | RNVC: 2
26VC-4618: RNCC: 6 | RNVC: 9

6 Feb 2002

5340-99-979-1015
Plunger Assembly

999791015
FV2206913: RNCC: 3 | RNVC: 2

21 Feb 1997

5340-99-633-0982
Rubber Bumper

996330982
3AA19543: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-652-2568
Dust And Moisture Seal Protective Cap

996522568
JA06695: RNCC: 3 | RNVC: 2
102JA06695: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-103-5313
Rod End Clevis

991035313
Z60332: RNCC: 3 | RNVC: 2
5W1035313: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-643-7361
Retaining Strap

996437361
Z041DG421287: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-131-5058
Mount Plate

991315058
42211404: RNCC: 3 | RNVC: 2

10 Oct 2002

5340-99-335-1878
Mounting Bracket

993351878
M2755002820100: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-99-435-5473
Retaining Strap

994355473
708897: RNCC: 3 | RNVC: 2
708897: RNCC: 5 | RNVC: 9
36DG1730: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-998-2441
Mounting Plate

999982441
332/E0793: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-99-554-3072
Loop Clamp

995543072
71MZ1262: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-126-9924
Spring Holder

991269924
M119NM35026FD: RNCC: 3 | RNVC: 2
NM35026FD: RNCC: 5 | RNVC: 2

15 Dec 2000

5340-99-553-8657
Bracket Assy

995538657
M5725530000000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-617-2229
Loop Clamp

996172229
G8: RNCC: 3 | RNVC: 2
U111668: RNCC: 5 | RNVC: 2
9560135900: RNCC: 5 | RNVC: 2
1101668: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-139-7880
Rigid Castor

991397880
KVF6RTB: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-617-6358
Rod End Clevis

5340-99-603-2557
Webbing Strap

5340-99-622-0418
Retaining Strap

5340-99-458-9243
Clamp

5340-99-813-9760
Plain Solid Disk

998139760
P359: RNCC: 3 | RNVC: 2
801561: RNCC: 5 | RNVC: 2
5058825: RNCC: 5 | RNVC: 2
P359A: RNCC: 5 | RNVC: 2
7202541: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-832-6603
Dust And Moisture Seal Boot

998326603
6310681: RNCC: 3 | RNVC: 2
LV7BD6310681: RNCC: 6 | RNVC: 9
61BE40372: RNCC: 6 | RNVC: 9

7 Nov 1989

5340-99-814-2202
Multiple Angle Bracket

998142202
40001306: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-99-205-0980
Webbing Strap

992050980
GMA59611: RNCC: 3 | RNVC: 9

25 Apr 1991

5340-99-479-7023
Manual Control Handle

994797023
CC 260D/006: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-99-341-8405
Spacing Threaded Standoff

993418405
SPA 02-SS-M3-25: RNCC: 3 | RNVC: 2
8300-1125: RNCC: 5 | RNVC: 2
0611V-005: RNCC: 6 | RNVC: 9

4 Apr 2006

5340-99-507-2136
Angle Bracket

995072136
50-24-152: RNCC: 3 | RNVC: 2
0050152: RNCC: 5 | RNVC: 2

3 Feb 1999

5340-99-133-9440
General Purpose Resilient Mount

991339440
CM391-60: RNCC: 3 | RNVC: 2
70-40-563: RNCC: 5 | RNVC: 2
DML040076: RNCC: 5 | RNVC: 2

10 Aug 2007

5340-99-488-6388
Seal Retaining Plate

994886388
J53100778-001: RNCC: 3 | RNVC: 2

13 Jan 2001

5340-99-555-0765
Snap Hook

995550765
SDMS-1240: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-99-201-6411
Sel Fork Lift Truck

992016411
EC101: RNCC: 3 | RNVC: 1
Z6-00001-02320: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-458-9683
Angle Bracket

994589683
354-450-005: RNCC: 3 | RNVC: 2

11 Oct 2007

5340-99-388-6541
Housing

993886541
WG1510-2300-102: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-99-147-5369
Mounting Bracket

991475369
110027SHT490: RNCC: 3 | RNVC: 2
26VC-11224: RNCC: 6 | RNVC: 9

31 Jan 2002

5340-99-616-1514
Block Clamp

996161514
110087-4693: RNCC: 3 | RNVC: 2
26VC-21557: RNCC: 6 | RNVC: 9

15 Feb 2002

5340-99-107-4313
Screw Thread Insert

991074313
AS8456-49: RNCC: 2 | RNVC: 2
B20830: RNCC: 5 | RNVC: 2
DEFSTAN53-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-530-3733
Handwheel

995303733
SX280SL002-006: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-665-5589
End Cover

996655589
NO PRIMARY REF 99-665-5589: RNCC: 3 | RNVC: 2
175295: RNCC: 5 | RNVC: 9
6A-22273: RNCC: 6 | RNVC: 9

9 Feb 2002

5340-99-299-0771
Mounting Plate

992990771
331/23788: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-99-151-3547
Pump Hose Cover

991513547
HC-337: RNCC: 3 | RNVC: 2
103887: RNCC: 5 | RNVC: 2

2 Nov 2005

5340-99-724-2546
Access Cover

997242546
33623: RNCC: 3 | RNVC: 2
P0595055: RNCC: 5 | RNVC: 2
FEP-1408-SC/102: RNCC: 5 | RNVC: 2
03464-001: RNCC: 6 | RNVC: 9

13 Nov 2003

5340-99-839-6446
Mounting Plate

998396446
377-320-018: RNCC: 3 | RNVC: 2
084GX-011: RNCC: 6 | RNVC: 9
SPCISR/09/02/101/05/03: RNCC: 6 | RNVC: 9

13 Oct 2008

5340-99-146-0444
Angle Bracket

991460444
S6120-62624-35: RNCC: 3 | RNVC: 2

11 Jun 1979

5340-99-433-6230
Bracket Assembly

994336230
NO PRIMARY REF 99-433-6230: RNCC: 3 | RNVC: 2
CD61903: RNCC: 5 | RNVC: 2
88115-103-855: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-985-1981
Angle Bracket

999851981
FV 2177654: RNCC: 3 | RNVC: 2
VDS22611: RNCC: 5 | RNVC: 2
MAE 22/0286: RNCC: 6 | RNVC: 9
FH9648S0023: RNCC: 6 | RNVC: 9

25 Sep 1996

5340-99-553-8601
Mounting Plate

995538601
404198-2007: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-99-126-4253
Retaining Strap

991264253
EC2820B071-041: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-99-424-5305
Rod End Connector

994245305
NO PRIMARY REF 99-424-5305: RNCC: 3 | RNVC: 2
F212266: RNCC: 5 | RNVC: 9
26FX8655: RNCC: 6 | RNVC: 9
26FX8655: RNCC: 6 | RNVC: 9

10 Oct 1979

5340-99-279-8878
Headless Straight Rod

992798878
6TA-41200-00: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-99-087-0778
Electrical-Mec Post

990870778
33728-00723: RNCC: 3 | RNVC: 2

29 Apr 1991

5340-99-477-4789
Resilient Mount

994774789
AC/12/01/07003: RNCC: 3 | RNVC: 2
AC/12/1/7003: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-99-831-9009
Angle Bracket

998319009
P-251288-012: RNCC: 3 | RNVC: 2
P251288-012: RNCC: 5 | RNVC: 2

12 Oct 1995

5340-99-655-6517
Mounting Bracket

996556517
P-621218-039: RNCC: 3 | RNVC: 2
P621218-039: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-107-3230
Comp Helical Spring

991073230
R0800-76: RNCC: 3 | RNVC: 2
R0800-76: RNCC: 5 | RNVC: 2
R0800-76: RNCC: 5 | RNVC: 2
696-267625: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-474-6386
Extension Handle

994746386
80037704: RNCC: 3 | RNVC: 2
07101-001: RNCC: 6 | RNVC: 9

27 Feb 2007

5340-99-708-7924
Cushioning Pad

997087924
K108081/001 ITEM 11: RNCC: 3 | RNVC: 2
K108081/001/11: RNCC: 5 | RNVC: 2
FL990BH0087: RNCC: 6 | RNVC: 9

23 Feb 1999

5340-99-385-4183
Access Cover

993854183
110136-7485: RNCC: 3 | RNVC: 2
26VC18293: RNCC: 6 | RNVC: 9

21 Feb 2002

5340-99-292-4659
Access Door Hinge

992924659
G416/4765/6: RNCC: 3 | RNVC: 2
G416/4765 ITEM 6: RNCC: 5 | RNVC: 2

20 Aug 2002

5340-99-930-6781
Access Cover

999306781
MBEU145968: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-99-215-1469
Mounting Plate

992151469
G303/6100/34: RNCC: 3 | RNVC: 2
G303/6100 ITEM 34: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-99-234-6057
Roller Holder

992346057
2161-39: RNCC: 3 | RNVC: 2
2161 PL PART NO. 39: RNCC: 5 | RNVC: 2

25 Nov 2013

5340-99-840-9583
Mechanic Equipment Hardware Kit

998409583
100389-1006-000: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-99-862-7403
Mounting Plate

998627403
EA5303P002-109: RNCC: 3 | RNVC: 2

19 May 2007

5340-99-212-0103
Handle Assembly

5340-99-215-2978
Access Cover

5340-99-215-8201
Angle Bracket

5340-99-221-5555

5340-99-626-9603
Electrical-Mec Post

5340-99-124-2981
Spring Tension Clip

5340-99-116-4166
Screw Thread Insert

5340-99-116-3957
Special Washer

5340-99-116-3890

5340-99-636-0757

5340-99-649-3467

5340-99-653-4705
Turnbuckle Body

5340-99-137-6160

5340-99-769-9608
Retaining Strap

997699608
0G0309003: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-769-8696
Access Cover

997698696
N200601: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-659-5262
Angle Bracket

996595262
A640203D150: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-99-495-9618

5340-99-463-0154

5340-99-470-0989

5340-99-382-4763
Loop Clamp

993824763
02/911467: RNCC: 3 | RNVC: 2
02/911467: RNCC: 5 | RNVC: 2

23 Apr 2009

5340-99-234-3822
General Purpose Resilient Mount

992343822
RRC7182: RNCC: 3 | RNVC: 2

19 Jul 1994

5340-99-378-8085
Fastener

993788085
41ZANTILUCE-M8: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-99-335-5000
Nonmetallic Bumper

993355000
GW70026: RNCC: 3 | RNVC: 2
FK9805H0003: RNCC: 6 | RNVC: 9

18 Jun 1998

5340-99-390-9887
Supporting Bracket

993909887
FV 2031148: RNCC: 3 | RNVC: 2

16 Dec 1991

5340-99-452-7680
Retaining Strap

994527680
MBEU5297: RNCC: 3 | RNVC: 2
0MBEU1597SHT2: RNCC: 5 | RNVC: 2
0MBEU5297: RNCC: 5 | RNVC: 2
27L1178: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-535-6258
Spacing Threaded Standoff

995356258
NM653151: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-99-398-6147
Retaining Strap

993986147
MBEU170937: RNCC: 3 | RNVC: 2
MBEU170937: RNCC: 5 | RNVC: 2

8 May 2002

5340-99-216-9426
Oil Slinger

992169426
T20046: RNCC: 3 | RNVC: 2

21 May 2004

5340-99-420-3524
Dust And Moisture Seal Protective Plug

994203524
D7661: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-99-641-4699
Bonding Strap

5340-99-611-8180

5340-99-610-7352
Du Protective Cover

5340-99-622-3870
Resilient Mount

5340-99-642-0811

5340-99-623-9509

5340-99-509-6812

5340-99-662-7484
Loop Clamp

996627484
EF818B03: RNCC: 1 | RNVC: 2
11945-7-03D: RNCC: 3 | RNVC: 2
TA028M016HD03: RNCC: 3 | RNVC: 2
TA028M016HD03: RNCC: 5 | RNVC: 2
1MEE829: RNCC: 6 | RNVC: 9

5 Sep 1995

5340-99-738-7604
Clamp Loop Mounting

997387604
LHMS-S5: RNCC: 3 | RNVC: 2
LHMS-S5: RNCC: 5 | RNVC: 2
MDS3011-9: RNCC: 5 | RNVC: 2
85-690-1516: RNCC: 6 | RNVC: 9
01-103-4260: RNCC: 6 | RNVC: 9
5340-99-715-2446: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-782-7799
Retaining Strap

997827799
E-LF-010609-01: RNCC: 3 | RNVC: 2
SM92300-059: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-900-7830
Plate R Spring Clip

999007830
NO PRIMARY REF 99-900-7830: RNCC: 3 | RNVC: 2
SDA179099: RNCC: 5 | RNVC: 2
SDA179099: RNCC: 5 | RNVC: 9

1 Mar 1977

5340-99-354-1001
Escutcheon Plate

993541001
F990/A10/E1/L: RNCC: 3 | RNVC: 2
E7960017: RNCC: 5 | RNVC: 2

9 Apr 2013

5340-99-667-3560
Protection Bellows

996673560
RB 7954/0150: RNCC: 3 | RNVC: 2
2-0000-3-1/7954: RNCC: 5 | RNVC: 1

4 Jun 2009

5340-99-471-3903
Manual Control Handle

994713903
A2227108-M: RNCC: 3 | RNVC: 2
A2227108-M: RNCC: 5 | RNVC: 9
063GY-001: RNCC: 6 | RNVC: 9

7 Aug 2006

5340-99-200-1141
Loop Clamp

992001141
SSML7-4: RNCC: 4 | RNVC: 1
B90317: RNCC: 5 | RNVC: 2
AGS2104-23: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-437-1091
Holder

994371091
0262-14421: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-873-4601
Cushioning Pad

998734601
FV 2202792: RNCC: 3 | RNVC: 2
2792A311: RNCC: 5 | RNVC: 2
FF9541W0005: RNCC: 6 | RNVC: 9

7 Feb 1995

5340-99-919-1541
Support Strip

999191541
WAD366: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-99-917-1091
Mounting Bracket

999171091
230080: RNCC: 3 | RNVC: 2
DRG09839: RNCC: 5 | RNVC: 1
09839: RNCC: 5 | RNVC: 1

26 Aug 1992

5340-99-879-0833
Swivel Caster

998790833
TS5200NT0EL: RNCC: 3 | RNVC: 2
1MEVGSK: RNCC: 6 | RNVC: 9

18 Jul 2004

5340-99-920-1408
Loop Clamp

999201408
P95B52: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-99-918-3224
Protection Bellows

999183224
A15410: RNCC: 3 | RNVC: 2
FV 1030487: RNCC: 5 | RNVC: 2
FV 1030487: RNCC: 5 | RNVC: 2
360302658: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-882-9300
Rim Lock

998829300
25.42.1745: RNCC: 3 | RNVC: 2

1 Feb 2007

5340-99-879-5505
Mending Plate

998795505
PE32697: RNCC: 3 | RNVC: 2

4 May 2012

5340-99-916-0114
Mounting Plate

999160114
50044383: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-99-895-3782
Catch Strike

998953782
6350424: RNCC: 3 | RNVC: 2
61BE40765: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-894-1537
Mounting Plate

998941537
40001793: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-99-891-7824
Strapping Seal

998917824
EMBOSSED SEAL3AH: RNCC: 3 | RNVC: 9

7 May 2013

5340-99-883-8253
Track Clip Assembly

998838253
FV2031047: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-99-893-0126
Handle

998930126
NHPL053235R1: RNCC: 3 | RNVC: 2
NHPL053235R1: RNCC: 5 | RNVC: 2

13 Nov 2001

5340-99-632-4242
Angle Bracket

996324242
AC02650: RNCC: 3 | RNVC: 2
27WW156: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-297-9403
Double Angle Bracket

992979403
M36150209200: RNCC: 3 | RNVC: 2
M3615020920000: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-99-290-6657
Block Clamp

992906657
EA126B19: RNCC: 3 | RNVC: 2

4 Apr 2009

5340-99-955-5040

5340-99-148-5106
Access Cover

991485106
1523096: RNCC: 3 | RNVC: 2
CV150951: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-99-321-1103
Mounting Bracket

993211103
12884/60263: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-99-608-7819
Dust And Moisture Seal Protective Cover

996087819
EU11202: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-640-7077
Loop Clamp

996407077
TA12: RNCC: 3 | RNVC: 2
36BB3230: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-309-2101
Retainer As Bracket

993092101
FV 2031173: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-99-701-6840
Block Clamp

997016840
110087-4825: RNCC: 3 | RNVC: 2

17 Dec 1993

5340-99-213-7006
Protection

992137006
500369348: RNCC: 3 | RNVC: 2

9 May 2011

5340-99-232-8945
Mounting Bracket

992328945
M2915133720000: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-99-531-5047

5340-99-624-3319
Retaining Strap

5340-99-568-5550
Electrical-Mec Post

5340-99-102-9687

5340-99-140-0196
Bracket

991400196
5232A12A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-417-7682
Main Bearing Set

994177682
83996217: RNCC: 3 | RNVC: 2

11 May 2004

5340-99-543-3449
Dust And Moisture Seal Protective Cap-Plug

995433449
APR50: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-104-7734
Compression Cup

991047734
AC022340: RNCC: 3 | RNVC: 2
AC022340: RNCC: 5 | RNVC: 2
27VA5267: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-758-5039
Access Cover

997585039
402680: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-740-0281
Angle Bracket

997400281
FV2228059: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-99-438-1025
Plain Solid Disc

994381025
N128738: RNCC: 3 | RNVC: 2
37F18065: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-230-0234
Curtains And Hooks

992300234
70 600 513: RNCC: 3 | RNVC: 2

18 May 2006

5340-99-719-6529
Retaining Strap

997196529
K167-74-119: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-258-1184
Mounting Plate

992581184
11476-011: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-99-716-0614
Mounting Plate

997160614
WD4181-22039-041: RNCC: 3 | RNVC: 2
WD4181-220391TEM1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-712-3038
Loop Clamp

997123038
12SS3264: RNCC: 3 | RNVC: 2
SS3264: RNCC: 5 | RNVC: 1
26FP/13112: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-483-7589
Mounting Bracket

994837589
020077757/009: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-99-446-6904
Undrilled Clamp

994466904
950-206: RNCC: 3 | RNVC: 2
0251-190576: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-440-5026
Post

994405026
F122742: RNCC: 3 | RNVC: 2
P202-515483: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9

8 May 1997

5340-99-375-0287
Mounting Plate

993750287
22074-193: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-99-257-8188
Mounting Strip

992578188
2021-4001-001: RNCC: 3 | RNVC: 2

19 May 1994

5340-99-662-7238
Rear Pivot Block

996627238
1176/07A: RNCC: 3 | RNVC: 2
FH952890007: RNCC: 6 | RNVC: 9

27 Jul 1995

5340-99-814-2357
Mounting Bracket

998142357
391-320-013: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-99-445-0293
Block Fairlead

994450293
EA1-73-319: RNCC: 3 | RNVC: 2
26FZ-1511: RNCC: 6 | RNVC: 9

15 Sep 2004

5340-99-613-5283
Ballistic Sup Wedge

996135283
EU2580B003-129: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-99-100-7022
Spring Tension Clip

991007022
80-0: RNCC: 3 | RNVC: 1
SDA125134-3: RNCC: 5 | RNVC: 1
SDA125134-3: RNCC: 5 | RNVC: 1
VBE431-309: RNCC: 5 | RNVC: 2
0095-089C: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-549-6646
Stop

995496646
WG1410-9159-101: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-99-458-9897
Pad Protector Assem

994589897
S4NY-S-A15: RNCC: 3 | RNVC: 2

29 Jul 2009

5340-99-723-6264
Quick Release Pin

997236264
3110-9442S: RNCC: 3 | RNVC: 2
3110-9442S: RNCC: 5 | RNVC: 2
3110-9442: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-496-0860
Corner Shield

994960860
P-890961-056: RNCC: 3 | RNVC: 2
BM-P-890961-056: RNCC: 5 | RNVC: 2
P890961-056: RNCC: 5 | RNVC: 2

17 Feb 1993

5340-99-963-5887
Access Cover

999635887
M119 NM 34894: RNCC: 3 | RNVC: 2
NM34894: RNCC: 5 | RNVC: 2
R0FN12431-35: RNCC: 5 | RNVC: 2
FL17853: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-786-1602
Electrical-Mec Post

997861602
S8-94-2621XAA: RNCC: 3 | RNVC: 2
S8-94-2621: RNCC: 5 | RNVC: 2

31 Mar 1992

5340-99-911-5622
Section Block Clamp

5340-99-198-3166

5340-99-618-5082

5340-99-618-3636

5340-99-656-3898
Line Supporti Strap

5340-99-624-4126

5340-99-414-2679
Manual Control Lever

994142679
EM1918: RNCC: 3 | RNVC: 2
42L635: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-628-5976
Loop Clamp

996285976
FV746940: RNCC: 3 | RNVC: 2
FV746940: RNCC: 5 | RNVC: 2

20 May 1988

5340-99-459-0897
Resilient Mount

994590897
E21016: RNCC: 3 | RNVC: 2
40B1332: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-810-4585

5340-99-205-0862
Resilient Mount

5340-99-811-0509
Angle Bracket

5340-99-204-7979

5340-99-198-7555

5340-99-205-7888
Access Cover

5340-99-610-0069

5340-99-710-6317

5340-99-198-6754

5340-99-198-7456
Spring Tension Clip

5340-99-204-7881
Pipe Hanger

5340-99-609-8337

5340-99-558-2005
Handwheel

995582005
D25352: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-548-5498
Helical Compression Spring Retainer

995485498
BM24819: RNCC: 3 | RNVC: 1

25 Apr 1991

5340-99-449-4216
Mounting Bracket

994494216
3KSM12ADX: RNCC: 3 | RNVC: 2
FF962GV0007: RNCC: 6 | RNVC: 9

25 Jul 1996

5340-99-961-6358
Lever

999616358
M3-32: RNCC: 3 | RNVC: 2
M3-32: RNCC: 5 | RNVC: 2
RSK-1646-01425: RNCC: 5 | RNVC: 2

5 Aug 2005

5340-99-956-7377
General Purpose Resilient Mount

999567377
E0981: RNCC: 3 | RNVC: 2
CX131211: RNCC: 5 | RNVC: 2
R30-3769-50: RNCC: 5 | RNVC: 2
5UB6736: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-253-7567
Mounting Bracket

992537567
3924/62462: RNCC: 3 | RNVC: 2
A3924/62462: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-923-2534
Comp Helical Spring

999232534
85-25-52-2-17011: RNCC: 3 | RNVC: 2
0264-923-2534: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-402-7817
Rod End Clevis

994027817
8-1F40: RNCC: 3 | RNVC: 2
10-6-40: RNCC: 5 | RNVC: 1
X3XCLR8-1F40: RNCC: 6 | RNVC: 9
42AA761: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-957-8664
Hinge

999578664
WG1410-0091-047: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-99-297-5490
Mounting Bracket

992975490
ER2521B106-045: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-99-961-6579
Mounting Bracket

999616579
R054-0559-PCD: RNCC: 3 | RNVC: 2

20 Feb 2012

5340-99-663-1223
Dust And Moisture Seal Protective Cap

996631223
SP70010: RNCC: 3 | RNVC: 2
M47981A: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-377-5627
Clamp Assembly

993775627
20618: RNCC: 3 | RNVC: 2
20618B: RNCC: 5 | RNVC: 2

11 Nov 2009

5340-99-438-9128
Retaining Strap

994389128
AEB1566145: RNCC: 3 | RNVC: 2
AEB1566145: RNCC: 5 | RNVC: 9
5UD8359: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-380-0905
Loop Clamp

993800905
MBEU82818: RNCC: 3 | RNVC: 2

27 May 2005

5340-99-254-4456
Cushioning Pad

992544456
SJ5018: RNCC: 3 | RNVC: 1
MP2675A: RNCC: 5 | RNVC: 2
MP2675A01/N0101: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-786-9929
Leather Strap

997869929
FV904676: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-9928
Bow Handle

997869928
FV904674: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-790-2277
Section Block Clamp

997902277
SL4859BR4B: RNCC: 3 | RNVC: 2
SL4859: RNCC: 5 | RNVC: 1
9BR4B SL4859: RNCC: 5 | RNVC: 2
SL4859B4RB: RNCC: 5 | RNVC: 2
9B4RB SL4859: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-793-6692
Angle Bracket

997936692
JRB1726: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-793-5056
Webbing Strap

997935056
55-7343: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-790-1212
Coupling

997901212
05.1478: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-784-4264
General Purpose Resilient Mount

997844264
111-30101: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-788-3181
Retaining Strap

997883181
001253039: RNCC: 3 | RNVC: 2
352-462C: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-786-9926
Flat Hook

997869926
FV2039955: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-99-790-7471
Helical Compression Spring Retainer

997907471
SV4041: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-786-1545
Dust And Moisture Seal Protective Cover

997861545
PE59009: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-99-792-7954
Angle Bracket

997927954
FV2283944: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-99-802-3549
Bracket

998023549
82021156: RNCC: 3 | RNVC: 2
82009990: RNCC: 5 | RNVC: 9

1 May 2004

5340-99-802-1513
Bumper

998021513
6358382: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-254-7101
General Purpose Resilient Mount

992547101
GB248KLT1BW: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-712-6238
Nonmetallic Bushing

997126238
C187: RNCC: 3 | RNVC: 2
27N385: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-437-7120

5340-99-300-3250

5340-99-282-5188
Catch Strike

5340-99-112-2450

5340-99-038-7266

5340-99-168-8814
Angle Bracket

991688814
KAL4309: RNCC: 3 | RNVC: 2
KAL4309: RNCC: 5 | RNVC: 2

28 Apr 1994

5340-99-103-0898
Dust And Moisture Seal Protective Plug

991030898
Y7061938: RNCC: 3 | RNVC: 1
7061938: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-657-7783
Angle Bracket

996577783
JJ103669: RNCC: 3 | RNVC: 2
JJ103669: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-874-1298
Filler Opening Cap

998741298
457-370: RNCC: 3 | RNVC: 2

6 Jul 2010

5340-99-874-4219
Mounting Plate

998744219
P1002216D0025: RNCC: 3 | RNVC: 2
T45-0000065233: RNCC: 5 | RNVC: 2

19 Sep 2008

5340-99-716-2193
Fastener

997162193
NO PRIMARY REF 99-716-2193: RNCC: 3 | RNVC: 2
A1D952-48: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-701-8066
Spring Tension Clip

997018066
NO PRIMARY REF 99-701-8066: RNCC: 3 | RNVC: 2
BTR6682: RNCC: 5 | RNVC: 2
MWC6204: RNCC: 5 | RNVC: 2
21100-11: RNCC: 5 | RNVC: 2

11 Aug 1994

5340-99-612-3627
Rod End Clevis

996123627
121E44-038-04-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-957-7931
Copperstix

999577931
NO PRIMARY REF 99-957-7931: RNCC: 3 | RNVC: 2
COPPERSTIX: RNCC: 5 | RNVC: 2
TT5552227: RNCC: 6 | RNVC: 9

21 Nov 2001

5340-99-406-2007
Retaining Strap

994062007
AS487-20: RNCC: 2 | RNVC: 2
28E14152: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-803-2696
Bottom Ring

998032696
V35-1467-50: RNCC: 3 | RNVC: 2
V35-1467-50: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-99-398-6232
Dust And Moisture Seal Protective Cap

993986232
RC01734: RNCC: 3 | RNVC: 2
042Y5-004: RNCC: 6 | RNVC: 9
0430X-004: RNCC: 6 | RNVC: 9

2 Sep 2004

5340-99-239-2175
Ratchet Buckle

992392175
NO PRIMARY REF 99-239-2175: RNCC: 3 | RNVC: 2
43014: RNCC: 5 | RNVC: 2
C575-LWM030112: RNCC: 6 | RNVC: 9

15 Jun 2001

5340-99-629-5937
Access Cover

996295937
WG1311-0072-045: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-958-8998
Access Cover

999588998
950-05-00-3011: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-99-009-0818
Double Angle Bracket

990090818
11711-011: RNCC: 3 | RNVC: 2
11711-011: RNCC: 5 | RNVC: 2

4 Nov 1992

5340-99-126-4842
Throat Plate

991264842
EC5331B099-103: RNCC: 3 | RNVC: 2

28 May 1997

5340-99-795-0180
Clip

997950180
NO PRIMARY REF 99-795-0180: RNCC: 3 | RNVC: 2
547-919: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-744-9567
Handwheel

997449567
004474638/07: RNCC: 3 | RNVC: 1
MV/00683/AZ/001/07: RNCC: 5 | RNVC: 1
MV/00683/AZ/001/204: RNCC: 5 | RNVC: 2
004474638 PART 204: RNCC: 5 | RNVC: 2
004474638/204: RNCC: 5 | RNVC: 2
MV/00683/AZ/001 PART 204: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-744-1158
Mechanic Equipment Hardware Kit

997441158
02120/DT/009745: RNCC: 3 | RNVC: 2
02120/IL/009745: RNCC: 5 | RNVC: 2
A02120/DT/009745: RNCC: 5 | RNVC: 2

20 Nov 2001

5340-99-802-4892
Extension Drawer Slide

998024892
451B-ACC-033PL: RNCC: 3 | RNVC: 2
C301-19: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-241-7088
Mounting Plate

992417088
P-099292-001: RNCC: 3 | RNVC: 2

7 Aug 2009

5340-99-423-9820
Dust And Moisture Seal Protective Plug

994239820
N0D3175-12DET18: RNCC: 3 | RNVC: 2
141217: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-426-9020
Rim Clenching Clamp

994269020
NO PRIMARY REF 99-426-9020: RNCC: 3 | RNVC: 2
BR4293: RNCC: 5 | RNVC: 2
36VV19872: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-146-7668
Angle Bracket

991467668
S6120-61403-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-560-9020
Spacing Threaded Standoff

995609020
SSN07Y270-020-004: RNCC: 3 | RNVC: 1
QCASSN07Y270-020-004: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-815-5581
Access Cover

998155581
883-620M1: RNCC: 3 | RNVC: 2
883620M1: RNCC: 5 | RNVC: 2
883 620M1: RNCC: 5 | RNVC: 2

25 Apr 1991

5340-99-285-3955
Dust And Moisture Seal Boot

992853955
DIP-IEC5-BK: RNCC: 3 | RNVC: 2
313798: RNCC: 5 | RNVC: 2
313-798: RNCC: 5 | RNVC: 2

28 Nov 2007

5340-99-157-9842
Nut And Bolt Locking Plate

991579842
CV71460: RNCC: 3 | RNVC: 2
2 0139-093: RNCC: 5 | RNVC: 2
40 7347: RNCC: 5 | RNVC: 2

25 Jun 2013

5340-99-765-1540
Butt Hinge Leaf

997651540
A-912485-001: RNCC: 3 | RNVC: 2
A912485-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5340-99-105-6217
Rim Lock

991056217
NO PRIMARY REF 99-105-6217: RNCC: 3 | RNVC: 2
S7-02-886: RNCC: 5 | RNVC: 2

25 Apr 1989

5340-99-443-1785
Swivel Castor

994431785
3-61RH: RNCC: 3 | RNVC: 2
B2013: RNCC: 5 | RNVC: 2
PEF5767-16: RNCC: 5 | RNVC: 2
26WA95231: RNCC: 6 | RNVC: 9
4A2423: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-365-4312
Angle Bracket

993654312
EA1-11-527: RNCC: 3 | RNVC: 2
26FZ-5462: RNCC: 6 | RNVC: 9
26FZ5462: RNCC: 6 | RNVC: 9

7 Jul 2001

5340-99-149-4827
Synchro Clamp

991494827
ME00177/025-24H ITEM 110: RNCC: 3 | RNVC: 2
ME00177-025-24H-110: RNCC: 5 | RNVC: 2
ME00177/025-24H/110: RNCC: 5 | RNVC: 2

24 Oct 2000

5340-99-254-1170
Handwheel

992541170
LF1103-20NM-SEBG: RNCC: 3 | RNVC: 2
LF1103-20NM.: RNCC: 5 | RNVC: 1
LF1103-20NM-SEBG: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-99-891-0237
Door Handle

998910237
DP150/103-2: RNCC: 3 | RNVC: 1

19 Dec 2001

5340-99-605-4486
Angle Bracket

5340-99-795-8283
Line Supporti Strap

5340-99-797-3784
Headle Straight Rod

5340-99-795-8244
Retaining Strap

5340-99-660-4745
Rod End Clevis

996604745
6CF9453: RNCC: 3 | RNVC: 2
26DL2055: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-99-830-2773
Resilient Mount

5340-99-202-7719

5340-99-405-5778
Screw Thread Insert

5340-99-625-9933

5340-99-626-1531

5340-99-297-6496
Multiple Angle Bracket

992976496
110003-20798: RNCC: 3 | RNVC: 2
26VC-6896: RNCC: 6 | RNVC: 9

15 Jan 2002

5340-99-423-0630
Compression Cup

994230630
KG278: RNCC: 3 | RNVC: 2
4Q2150: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-269-3899
Webbing Sling

992693899
SDMS 1800: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-99-604-9472
Block Clamp

996049472
F306436: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-719-6902
Grooved Clamp Coupling

997196902
7038: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-610-7867
Dust And Moisture Seal Protective Cover

996107867
JR21581: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-196-9623
Catch Strike

991969623
NB15B1005: RNCC: 3 | RNVC: 2

2 May 2001

5340-99-300-8964
Bracket

993008964
M5725036300000: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-99-442-0350
Loop Clamp

994420350
MBEU90780: RNCC: 3 | RNVC: 2

2 May 1995

5340-99-470-0441
Rod End Clevis

994700441
A8691: RNCC: 3 | RNVC: 2
27K1128: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-701-2992
Mounting Plate

997012992
110163-245: RNCC: 3 | RNVC: 2

26 May 2009

5340-99-125-1047
Leather Strap

5340-99-137-9396
Strap Hinge

5340-99-654-8330
Electrical-Mec Post

996548330
700-2-15908: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-096-4337
Dust And Moisture Seal Protective Cover

990964337
GM-B-122087: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-99-159-9332
Center Roll Pin Kit

991599332
39071-1 UK: RNCC: 3 | RNVC: 2
39071-1 UK: RNCC: 6 | RNVC: 9

15 Feb 2011

5340-99-940-0600
Retaining Strap

999400600
SSML9-20-1: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-99-846-8241
Padlock

998468241
PL362/25: RNCC: 3 | RNVC: 1
PL362/25 (KEYED ALIKE): RNCC: 5 | RNVC: 2

4 Mar 2008

5340-99-738-1085
Mounting Bracket

997381085
KB956K0188-004S: RNCC: 3 | RNVC: 2
KB956K0188-004: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-99-330-0771
Firing Guard Plate

993300771
MBEU-2299GRU5: RNCC: 3 | RNVC: 2
A/MBEU-2299GRU5: RNCC: 5 | RNVC: 2

31 Jan 1990

5340-99-888-3631
Angle

998883631
S3S18116048: RNCC: 3 | RNVC: 2
S3S 18116000 ITEM 048: RNCC: 5 | RNVC: 2
S3S 18116000/048: RNCC: 5 | RNVC: 2

7 Jan 1997

5340-99-748-9915
Mounting Bracket

997489915
30123296: RNCC: 3 | RNVC: 2
2015796: RNCC: 5 | RNVC: 2
3001023 PART 8: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-99-604-9318
Metal Grille

996049318
B314068-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-195-4639
Swivel Caster

991954639
BSE 200 NT0E: RNCC: 3 | RNVC: 2
BSE 200 NT05: RNCC: 5 | RNVC: 9

30 Nov 2000

5340-99-587-8839
Tube Plug

995878839
BA 73321: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-664-9246
Retaining Strap

996649246
111245SHT943: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-99-837-1194
Mounting Bracket

998371194
20330: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-99-832-3426
Webbing Strap

998323426
RRC8763: RNCC: 3 | RNVC: 2
FJ9615L1703: RNCC: 6 | RNVC: 9

23 Aug 1996

5340-99-832-4267
Mounting Bracket

998324267
FV 2219958: RNCC: 3 | RNVC: 2
FV 2219958: RNCC: 5 | RNVC: 2
FE000XR0128: RNCC: 6 | RNVC: 9

30 Oct 2000

5340-99-843-5038
Plate

998435038
SY30180: RNCC: 3 | RNVC: 2
001XZ-026: RNCC: 6 | RNVC: 9

19 Sep 2000

5340-99-831-8969
Retaining Strap

998318969
AX13138: RNCC: 3 | RNVC: 2
F300 0T 008 5278: RNCC: 6 | RNVC: 9

28 Sep 1995

5340-99-170-5722
Mounting Bracket

991705722
A5105060: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-99-667-9728
Buffer

996679728
8162280: RNCC: 3 | RNVC: 2

5 May 2011

5340-99-556-7639
Access Cover

995567639
37532861: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results