What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 9 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 9 of 53

5340-27-025-4369
Mounting Bracket

270254369
1010FG-1801288: RNCC: 2 | RNVC: 1

16 Mar 2005

5340-27-025-9726
Rim Latch

270259726
330253: RNCC: 2 | RNVC: 1
500013343482: RNCC: 2 | RNVC: 1

12 May 2005

5340-27-012-5542
Mounting Bracket

270125542
10131YS0730: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-025-0172
Mounting Bracket

270250172
1009 1YS 1181: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-059-3050
Access Cover

270593050
98019105-24: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-025-0015
Mending Plate

270250015
205-061-643-1: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-051-4114
Mending Plate

270514114
108020: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-054-6609
Mounting Bracket

270546609
55RS752879: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-010-2563
Angle Bracket

270102563
10131YS0803: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-022-7336
Mending Plate

270227336
10V1219100: RNCC: 2 | RNVC: 1

11 May 2004

5340-27-026-0104
Bail Handle

270260104
16001DK0013: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-004-3214
Retaining Strap

270043214
05001YK0036: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-028-6735
Mounting Bracket

270286735
71B21-76521-AA: RNCC: 2 | RNVC: 1

27 Jan 2006

5340-27-018-8292
Clevis And U-Bolt

270188292
901-YK-33: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-0539
Mending Plate

270210539
1010FG-0000317: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3650
Mending Plate

270173650
1009.1IS.0074: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-042-8467
Flush Catch Claw

270428467
1010006269: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-018-4189
Dashpot Piston

270184189
22114: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-9104
Mending Plate

270349104
691529: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-035-5949
Access Cover

270355949
EA 10 010: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-013-3902
Catch Strike

270133902
YC15 V44162 AC: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-018-0898
Loop Clamp

270180898
PPRC KELEPCE 50: RNCC: 2 | RNVC: 1
PPRC KELEPCE 50: RNCC: 2 | RNVC: 1

31 Oct 2003

5340-27-025-2305
Mounting Bracket

270252305
C132061: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-055-5094
Mounting Bracket

270555094
201415: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-012-5487
Mending Plate

270125487
10131YT0560: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-057-6303
Mending Plate

270576303
ALTFC01124: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-053-2880
Mounting Bracket

270532880
H341231500: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-024-9000
Mounting Bracket

270249000
2510-ATF-0102: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-044-8039
Loop Clamp

270448039
82 00 504 652: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-021-0339
Bail Handle

270210339
1009.1KI.0308-5*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-0371
Loop Clamp

270150371
7359602: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-034-7486
Bow Handle

270347486
12E50-76294-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-038-1355
Mounting Bracket

270381355
1010FK-2702073: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-055-6687
Mortise Lock

270556687
152R35: RNCC: 5 | RNVC: 9

22 Dec 2011

5340-27-035-9698
Plug Button

270359698
735382240: RNCC: 2 | RNVC: 1

13 Apr 2007

5340-27-021-4340
Mounting Bracket

270214340
1012.1HSCA.03-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-1439
Mending Plate

270381439
48968-FA200: RNCC: 5 | RNVC: 9

17 Sep 2007

5340-27-040-4936
Mounting Bracket

270404936
8762673: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-041-3433
Mounting Bracket

270413433
83A18-35024-AA: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-050-8990
Rod End Connector

270508990
63D-44100-11: RNCC: 2 | RNVC: 2

13 Sep 2010

5340-27-057-6383
Mounting Bracket

270576383
5340-TJ-03434: RNCC: 2 | RNVC: 1

17 Sep 2012

5340-27-041-0631
Mending Plate

270410631
7152208: RNCC: 2 | RNVC: 1

28 Apr 2008

5340-27-023-1295
Mounting Bracket

270231295
2ABM 1MK 0028: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-006-8238
Mounting Bracket

270068238
QEU101060-LD: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-039-6453
Platen Holder

270396453
INT-001-13: RNCC: 5 | RNVC: 9

12 Dec 2007

5340-27-060-0490
Mending Plate

270600490
MM-7490-0301: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-021-3096
Mending Plate

270213096
1012.1HSCA.02-63: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-2076
Catch Strike

270392076
7607400: RNCC: 2 | RNVC: 1

19 Nov 2007

5340-27-048-9644
Mending Plate

270489644
103679: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-039-3213
Utility Access Door

270393213
9BM 5340-00653: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-018-6808
Mounting Bracket

270186808
1010FG-1803251: RNCC: 2 | RNVC: 1
HSN06-023: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-046-6774
Angle Bracket

270466774
Y533-71400-204: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-001-7894
Loop Clamp

270017894
HUGES300C PART MS21919WDG14: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-040-4507
Mounting Bracket

270404507
10912021: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-035-6177
Mounting Bracket

270356177
83.97487.0510: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-018-6561
Mounting Bracket

270186561
1010FG-1206805: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-1860
Mounting Bracket

270281860
72A34-16738-AA: RNCC: 2 | RNVC: 1

12 Dec 2005

5340-27-052-6336
Mounting Bracket

270526336
1010FMA-0100135-30: RNCC: 2 | RNVC: 1

10 Feb 2011

5340-27-029-1511
Catch Strike

270291511
46461036: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-004-5149
Access Cover

270045149
10121YK5291: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-058-3582
Expansion Plug

270583582
CV60217: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-058-9063
Access Cover

270589063
M258D320520000: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-017-3363
Mending Plate

270173363
98003563: RNCC: 2 | RNVC: 1

18 Jun 2003

5340-27-001-8046
Access Door Hinge

270018046
CESSNA-185-PART0711037-6: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-051-0302
Access Cover

270510302
20X20: RNCC: 3 | RNVC: 2

27 Sep 2010

5340-27-048-4657
Bridge Clamp

270484657
BW303205009D: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-024-5471
Bridge Clamp

270245471
07002YK0056: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-054-6038
Mounting Bracket

270546038
55RS752945: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-038-8567
Mounting Bracket

270388567
2ABEP00290: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-041-4025
Utility Access Door

270414025
75X198 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-013-3056
Mending Plate

270133056
46749601: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-007-3198
Roller Holder

270073198
3011R-304000.10: RNCC: 2 | RNVC: 1

18 Oct 1999

5340-27-042-3702
Strap Hinge

270423702
14922: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-049-4777
Mending Plate

270494777
105379: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-058-3850
Access Cover

270583850
37507-27200: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-036-2444
Mounting Bracket

270362444
3C46E22078AA: RNCC: 2 | RNVC: 1

16 May 2007

5340-27-005-1596
Control Rod

270051596
1010000295: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-4855
Mending Plate

270494855
108601: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-044-9147
Mounting Bracket

270449147
02008-TRS-10-0005-02: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-027-9074
Mounting Bracket

270279074
1010FK-3506306: RNCC: 2 | RNVC: 1
1010FK-3506306: RNCC: 5 | RNVC: 9

17 Nov 2005

5340-27-018-7130
Mounting Bracket

270187130
1010FK-2702121: RNCC: 2 | RNVC: 1
1010FK-2702121: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-9396
Access Cover

270589396
VOE12746502: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-054-2040
Utility Access Door

270542040
RC-130P-K3: RNCC: 5 | RNVC: 9

8 Aug 2011

5340-27-016-9323
Loop Clamp

270169323
51.97401.0539: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-024-4083
Angle Bracket

270244083
209-060-160-5: RNCC: 2 | RNVC: 1

21 Oct 2004

5340-27-053-6579
Mechanical Stop

270536579
H341102900: RNCC: 2 | RNVC: 1

1 Jun 2011

5340-27-058-3014
Bow Handle

270583014
104001: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-043-8935
Utility Access Door

270438935
198X198 CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-057-8812
Mounting Bracket

270578812
32129-ZY3-000: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-018-5110
Mounting Bracket

270185110
517152700: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-6799
Mending Plate

270386799
377770903001: RNCC: 2 | RNVC: 1

25 Oct 2007

5340-27-038-7344
Rod End Clevis

270387344
10091YC0020: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-050-5100
Mending Plate

270505100
104775: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-058-9398
Access Cover

270589398
VOE12746500: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-022-6544
Rod End Clevis

270226544
27321: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-050-9508
Access Cover

270509508
10994-3: RNCC: 3 | RNVC: 2
10994-3: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-27-046-4277
Mounting Bracket

270464277
MTC2607-L: RNCC: 2 | RNVC: 1

7 Aug 2009

5340-27-060-0614
Mounting Bracket

270600614
AB-7490-0029: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-019-8133
Mounting Bracket

270198133
34623806910: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9171
Mounting Bracket

270069171
91AG 9N077 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-019-6395
Bail Handle

270196395
05001HK0108: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-010-1719
Bridge Clamp

270101719
98010141: RNCC: 2 | RNVC: 1

12 Nov 2001

5340-27-007-1704
Retaining Clip

270071704
E 860500 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-018-6608
Mounting Bracket

270186608
1010FK-1911408: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-3122
Leakproof Seal Plug

270593122
3.62.01.02.014: RNCC: 5 | RNVC: 9

11 Jul 2013

5340-27-017-3618
Mending Plate

270173618
1009.1IS.0039-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-044-3756
Mounting Bracket

270443756
12E01-78036-AA-1: RNCC: 2 | RNVC: 1

30 Jan 2009

5340-27-055-6741
Loop Holder

270556741
1.HIBM-1I-3061D02: RNCC: 2 | RNVC: 1

23 Dec 2011

5340-27-017-3632
Mending Plate

270173632
1009.1IS.0068-A/4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-026-9092
Mounting Bracket

270269092
1010FK-0000248-1: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-059-0276
Mounting Bracket

270590276
1010FMA-0000892-1: RNCC: 2 | RNVC: 1

17 May 2013

5340-27-014-1017
Truss Fairlead

270141017
10131YM0101: RNCC: 2 | RNVC: 1

10 Sep 2002

5340-27-006-9397
Mounting Bracket

270069397
91AG A01939 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-058-9074
Access Cover

270589074
M532F493720200: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-017-2888
Mounting Bracket

270172888
MP001108: RNCC: 2 | RNVC: 1

9 Jun 2003

5340-27-059-2650
Mounting Bracket

270592650
55RS752983: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-021-1036
Access Cover

270211036
1010FK-1911246: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-2126
Mounting Bracket

270212126
1012.1HSCA.03-30: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-2882
Mounting Bracket

270532882
H341231800: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-008-0400
Handle Grip

270080400
25659: RNCC: 2 | RNVC: 1

8 Jun 2000

5340-27-025-5732
Mounting Bracket

270255732
1010FG-1801331: RNCC: 2 | RNVC: 1

24 Mar 2005

5340-27-055-5722
Utility Access Door

270555722
585X190 CM: RNCC: 3 | RNVC: 1

12 Dec 2011

5340-27-057-3871
Bridge Clamp

270573871
020051010300: RNCC: 2 | RNVC: 1

30 Jul 2012

5340-27-015-0557
Loop Clamp

270150557
7057332-4: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-9242
Mending Plate

270599242
10084175: RNCC: 2 | RNVC: 1

9 Dec 2013

5340-27-018-6694
Mounting Bracket

270186694
1010FK-2703824: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-5727
Mending Plate

270485727
HD301112SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-053-0168
Mounting Bracket

270530168
43 48 052 000: RNCC: 2 | RNVC: 2

16 Mar 2011

5340-27-041-4352
Mending Plate

270414352
44135: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-056-5030
Mending Plate

270565030
203491: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-023-5138
Webbing Strap

270235138
8690501: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-023-1274
Mounting Bracket

270231274
2ABM 1MK 0027: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-032-1873
Catch Strike

270321873
002450-002: RNCC: 2 | RNVC: 1
002450-002: RNCC: 2 | RNVC: 1

7 Jun 2006

5340-27-043-2950
Mounting Bracket

270432950
74A05-60473-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-056-7099
Mounting Bracket

270567099
MM-7412-0272: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-049-8481
Mending Plate

270498481
108584: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-053-5629
Utility Access Door

270535629
200X240 CM CIFT ACILIR: RNCC: 2 | RNVC: 1

20 May 2011

5340-27-039-5783
Flush Catch

270395783
0045815: RNCC: 2 | RNVC: 1

10 Dec 2007

5340-27-017-4163
Mounting Bracket

270174163
98013391: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-028-6100
Handle Grip

270286100
1010005470: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-032-3950
Mounting Bracket

270323950
2ABMK02487: RNCC: 2 | RNVC: 1

3 Jul 2006

5340-27-052-7650
Bow Handle

270527650
897405249251: RNCC: 2 | RNVC: 1

22 Feb 2011

5340-27-022-2572
Expansion Plug

270222572
50DIN443PHR: RNCC: 2 | RNVC: 1
10121YT5615: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-025-3426
Mounting Bracket

270253426
2ABM 1MK 0046: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-029-0120
Bow Handle

270290120
BTR586LUH: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-049-5099
Bridge Clamp

270495099
105271-9: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-015-0506
Angle Bracket

270150506
1010FK-1811601: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-029-0201
Mending Plate

270290201
7768056: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-054-9815
Mounting Bracket

270549815
5423761: RNCC: 2 | RNVC: 1

27 Oct 2011

5340-27-060-0474
Mounting Bracket

270600474
MM-7490-0311: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-029-1406
Mounting Bracket

270291406
10003968: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-018-7500
Butt Hinge

270187500
09013DM0116: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-2381
Bail Handle

270342381
KULP, 96MM: RNCC: 2 | RNVC: 1
382: RNCC: 2 | RNVC: 1
DOG01: RNCC: 2 | RNVC: 1
96MM DOLAP KULPU: RNCC: 2 | RNVC: 1
96MM,DOLAP: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-053-9800
Mounting Bracket

270539800
76 8C 583 99R: RNCC: 2 | RNVC: 2

13 Jul 2011

5340-27-018-7103
Mounting Bracket

270187103
1010FK-2702062: RNCC: 2 | RNVC: 1
1010FK-2702062: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-7884
Mounting Bracket

270207884
1009.1KI.0339-13: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-8573
Swivel Caster

270538573
10131MT0233: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-27-055-3064
Mounting Bracket

270553064
1692-0082: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-038-4773
Loop Clamp

270384773
T30565-500: RNCC: 2 | RNVC: 1
T30565-500: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-054-3070
Mending Plate

270543070
98019689: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-020-6334
Mounting Bracket

270206334
1009.1KI.0220-11*5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-7158
Caster Wheel

270537158
TEKER 100 MM: RNCC: 5 | RNVC: 9

10 Jun 2011

5340-27-017-9394
Mounting Bracket

270179394
1009 1YY 7011: RNCC: 2 | RNVC: 1

14 Oct 2003

5340-27-054-6605
Mounting Bracket

270546605
55RS752887: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-009-3955
Mounting Bracket

270093955
10131YA0162: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-051-4156
Mending Plate

270514156
109330: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-019-6400
Webbing Strap

270196400
05001HK0120: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-1664
Webbing Strap

270211664
05001HY0113: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7691
Mending Plate

270227691
24V0511300: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-007-3975
Mounting Bracket

270073975
95AG A025K64 AA: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-049-9682
Mending Plate

270499682
HD204279: RNCC: 2 | RNVC: 2
HD204279: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-048-5127
Mounting Bracket

270485127
HD152150Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-017-9493
Loop Clamp

270179493
04039070: RNCC: 2 | RNVC: 1
4730 DA 0010290: RNCC: 2 | RNVC: 1

15 Oct 2003

5340-27-054-3391
Mending Plate

270543391
10030275: RNCC: 2 | RNVC: 1

22 Aug 2011

5340-27-013-6795
Butt Hinge

270136795
MEN-OKKA .K: RNCC: 2 | RNVC: 1
MEYSAN M35-3D: RNCC: 2 | RNVC: 1
MENTESE, OKKA KAPI: RNCC: 2 | RNVC: 1
MENTESE,OKKA KAPI: RNCC: 5 | RNVC: 2

12 Jul 2002

5340-27-059-4274
Loop Clamp

270594274
T1967-764480-1: RNCC: 2 | RNVC: 1

2 Aug 2013

5340-27-056-5275
Bridge Clamp

270565275
2.HIBM-T07/26-49-1: RNCC: 2 | RNVC: 1

9 Apr 2012

5340-27-050-0724
Mending Plate

270500724
108215: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-051-1090
Mending Plate

270511090
107479: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-054-6654
Mounting Bracket

270546654
55RS752982: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-046-4640
Mortise Lock

270464640
152R-35: RNCC: 2 | RNVC: 1
152R-35: RNCC: 2 | RNVC: 1

13 Aug 2009

5340-27-054-7174
Mending Plate

270547174
98022775: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-040-6025
Access Cover

270406025
Y532-68002-204: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-005-6019
Angle Bracket

270056019
8602646: RNCC: 2 | RNVC: 1
95VT-7B638-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-051-3155
Bow Handle

270513155
13F10-67174-AA: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-052-2577
Mounting Bracket

270522577
INS9: RNCC: 2 | RNVC: 2

30 Dec 2010

5340-27-029-1290
Mounting Bracket

270291290
71B22-55070-AA: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-054-6655
Mounting Bracket

270546655
55RS752963: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-050-8571
Mounting Bracket

270508571
10046472: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-048-0038
Bridge Clamp

270480038
140100013: RNCC: 2 | RNVC: 2
140100013: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-027-6312
Mending Plate

270276312
12A14-66028-AB: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-018-7079
Mounting Bracket

270187079
1010FK-2702017: RNCC: 2 | RNVC: 1
1010FK-2702017: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-1937
Mounting Bracket

270421937
2.HIBM-4L-592/4-7: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-047-2412
Bridge Clamp

270472412
1010FG-2963006-1: RNCC: 2 | RNVC: 1

16 Nov 2009

5340-27-052-7406
Mending Plate

270527406
76 47 811 64R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-053-3676
Utility Access Door

270533676
H341149103: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-017-9162
Rod End Clevis

270179162
1009 1KI 0228-24: RNCC: 2 | RNVC: 1

7 Oct 2003

5340-27-032-5560
Butt Hinge

270325560
05001FM0142: RNCC: 2 | RNVC: 1

7 Aug 2006

5340-27-056-4593
Mending Plate

270564593
10064495: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-043-8926
Utility Access Door

270438926
90X195 CM KAPI,ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-058-7090
Bow Handle

270587090
12F00-72698-AA: RNCC: 2 | RNVC: 1

20 Mar 2013

5340-27-033-6439
Mechanical Stop

270336439
40-205-2365: RNCC: 2 | RNVC: 1
40-205-2365: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-058-0024
Mending Plate

270580024
17113-ZY3-003: RNCC: 2 | RNVC: 1

29 Nov 2012

5340-27-032-7333
Catch Strike

270327333
7700763899: RNCC: 2 | RNVC: 1

13 Sep 2006

5340-27-017-3857
Mounting Bracket

270173857
1009.1IS.0038: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-032-7332
Catch Strike

270327332
7700763854: RNCC: 2 | RNVC: 1

13 Sep 2006

5340-27-053-8303
Caster Wheel

270538303
C133-100080: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-022-1545
Mounting Bracket

270221545
1010FG-1802379-6: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-017-3617
Mending Plate

270173617
10091IS0051: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3705
Pad Eye

270173705
1009.1IS.0073-25: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-057-5950
Mounting Bracket

270575950
491804021: RNCC: 2 | RNVC: 1

10 Sep 2012

5340-27-034-4650
Mounting Bracket

270344650
13D00-56326-AA: RNCC: 2 | RNVC: 1

10 Jan 2007

5340-27-039-3948
Mounting Bracket

270393948
10025632: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-049-4782
Mending Plate

270494782
107284: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-052-9346
Access Cover

270529346
J1 65 800 531: RNCC: 3 | RNVC: 2

9 Mar 2011

5340-27-054-2873
Bridge Clamp

270542873
98021779: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-055-3183
Mending Plate

270553183
203061: RNCC: 2 | RNVC: 2

29 Nov 2011

5340-27-054-7166
Bridge Clamp

270547166
98022442: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-011-0545
Access Cover

270110545
7115311203: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-054-6658
Mounting Bracket

270546658
55RS752966: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-006-6994
Elbow Catch

270066994
5K85761: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-049-1746
Mounting Bracket

270491746
MP002775: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-052-2978
Mounting Bracket

270522978
303345: RNCC: 2 | RNVC: 1

4 Jan 2011

5340-27-042-6380
Mounting Bracket

270426380
3883158: RNCC: 2 | RNVC: 1
3883158: RNCC: 2 | RNVC: 1

2 Sep 2008

5340-27-035-7771
Bow Handle

270357771
735384562: RNCC: 2 | RNVC: 1

28 Mar 2007

5340-27-036-3885
Expansion Plug

270363885
3583579: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-042-5665
Mending Plate

270425665
54547195: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-032-7166
Bow Handle

270327166
7700799654: RNCC: 2 | RNVC: 1

12 Sep 2006

5340-27-015-6519
Butt Hinge

270156519
05001HM0035: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-052-5566
Mounting Bracket

270525566
4592038651: RNCC: 2 | RNVC: 1

7 Feb 2011

5340-27-040-8016
Mending Plate

270408016
MK517121: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-041-3647
Utility Access Door

270413647
104X207 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-048-9637
Mending Plate

270489637
103667: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-054-4828
Mounting Bracket

270544828
118E14: RNCC: 3 | RNVC: 2

19 Sep 2011

5340-27-037-0339
Mounting Bracket

270370339
C70H46: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-043-4780
Caster Wheel

270434780
SARHOS TEKER, TABLALI: RNCC: 2 | RNVC: 1

13 Nov 2008

5340-27-048-0619
Bridge Clamp

270480619
51RS920184: RNCC: 2 | RNVC: 1

31 Dec 2009

5340-27-018-3081
Mending Plate

270183081
10121YS5553: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-047-9887
Mounting Bracket

270479887
140100637: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-017-3643
Mending Plate

270173643
1009.1IS.0068-B/33: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-0602
Expansion Plug

270590602
01179140: RNCC: 2 | RNVC: 1

21 May 2013

5340-27-053-5762
Mounting Bracket

270535762
H343002500: RNCC: 2 | RNVC: 1

23 May 2011

5340-27-028-3180
Mounting Bracket

270283180
7150031: RNCC: 2 | RNVC: 1

22 Dec 2005

5340-27-048-0132
Mounting Bracket

270480132
140100192: RNCC: 2 | RNVC: 2
140100601: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-013-5919
Mounting Bracket

270135919
11 620709: RNCC: 2 | RNVC: 1

1 Jul 2002

5340-27-043-0936
Mounting Bracket

270430936
2.HIBM-1I-1516/4: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-036-0737
Handle Grip

270360737
13C00-68546-AA: RNCC: 2 | RNVC: 1

26 Apr 2007

5340-27-050-8178
Bow Handle

270508178
83614410000: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-27-018-4384
Rod End Clevis

270184384
31142601300: RNCC: 2 | RNVC: 1
31142601500: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-5536
Mounting Bracket

270575536
M539F329700000: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-052-5578
Catch Strike

270525578
82 00 208 237: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-051-1084
Mending Plate

270511084
103816: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-050-0801
Access Cover

270500801
AR536T340020000: RNCC: 2 | RNVC: 1
AR536T340020000: RNCC: 2 | RNVC: 1

22 Jun 2010

5340-27-051-0928
Angle Bracket

270510928
83611500002: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-27-008-3736
Handle Grip

270083736
34527: RNCC: 2 | RNVC: 1

27 Sep 2000

5340-27-033-0742
Bow Handle

270330742
1827686: RNCC: 2 | RNVC: 1

16 Oct 2006

5340-27-055-4978
Access Cover

270554978
58RS509837: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-048-4451
Mending Plate

270484451
51.95840-5070: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-048-7543
Loop Clamp

270487543
CN100508-LD: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-057-3681
Mending Plate

270573681
020050040400: RNCC: 2 | RNVC: 1

26 Jul 2012

5340-27-054-6783
Mounting Bracket

270546783
55RS752919: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-047-2753
Mending Plate

270472753
79A00-57475-AA: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-27-029-2808
Access Cover

270292808
1010FK-2810718-1: RNCC: 2 | RNVC: 1

17 Mar 2006

5340-27-055-8749
Access Cover

270558749
6111.5400-1: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-026-0096
Rod End Clevis

270260096
389990719001: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-056-5314
Access Cover

270565314
3835013: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-058-3887
Access Cover

270583887
37832-04800: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-023-4155
Mounting Bracket

270234155
1010FK-2710758: RNCC: 2 | RNVC: 1

29 Jun 2004

5340-27-013-3073
Mending Plate

270133073
71711036: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-026-0237
Loop Clamp

270260237
2900926: RNCC: 2 | RNVC: 1

20 May 2005

5340-27-032-6382
Utility Access Door

270326382
FT-001-0101: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-017-6937
Mounting Bracket

270176937
H-39-0466-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-035-3041
Mounting Bracket

270353041
3C46E51137A: RNCC: 2 | RNVC: 1

7 Mar 2007

5340-27-020-8104
Compression Cup

270208104
05001FY0021: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-9834
Mortise Lock

270149834
10091YK0299: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-3035
Access Cover

270563035
3833313: RNCC: 3 | RNVC: 2

13 Mar 2012

5340-27-058-0418
Caster Wheel

270580418
KK0392220: RNCC: 5 | RNVC: 9

4 Dec 2012

5340-27-055-2853
Mounting Bracket

270552853
C1000-01A: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-27-059-6818
Loop Clamp

270596818
901-KL-415: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-058-2724
Mending Plate

270582724
MM-7490-0055: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-020-7547
Mounting Bracket

270207547
1009.1KI.0244-1*3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1650
Mounting Bracket

270491650
S01 001 0001 1650 014 F 02.G: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-032-2046
Mounting Bracket

270322046
83A11-66231-AA: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-016-0309
Loop Clamp

270160309
05001FK0062: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-018-3048
Mending Plate

270183048
10121YS5542: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-8199
Mending Plate

270538199
C173-140001: RNCC: 2 | RNVC: 2

23 Jun 2011

5340-27-039-3691
Mounting Bracket

270393691
R9442-1430: RNCC: 2 | RNVC: 1

28 Nov 2007

5340-27-055-3418
Mounting Bracket

270553418
1692-0206: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-035-9369
Plug Button

270359369
735419581: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-056-8691
Mending Plate

270568691
201803: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-054-1650
Mending Plate

270541650
40-057.00/10-127: RNCC: 2 | RNVC: 1

3 Aug 2011

5340-27-008-2479
Angle Bracket

270082479
98000227-1: RNCC: 2 | RNVC: 1

28 Aug 2000

5340-27-021-0322
Lock Key

270210322
1009.1KI.0345-6: RNCC: 2 | RNVC: 1
1009.1KI.0232-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7897
Loop Clamp

270017897
CESSNA-421B PARAN742-D12: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-059-6610
Loop Clamp

270596610
901-KL-363: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-044-0553
Sliding Door Track

270440553
0150: RNCC: 2 | RNVC: 1

2 Jan 2009

5340-27-044-4764
Mounting Bracket

270444764
74A05-60338-AA: RNCC: 2 | RNVC: 1

10 Feb 2009

5340-27-005-8091
Sliding Door Hanger

270058091
86VB-V268B40-AF: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-27-027-2585
Angle Bracket

270272585
15-01-467-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-049-1038
Coat And Hat Hook

270491038
300741: RNCC: 3 | RNVC: 2

2 Apr 2010

5340-27-021-4082
Mounting Bracket

270214082
1009.1KI.0302/1-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-003-9877
Access Cover

270039877
10121YK5003: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-035-0813
Retaining Clip

270350813
710046: RNCC: 2 | RNVC: 1

26 Feb 2007

5340-27-015-8949
Butt Hinge

270158949
99999-NIIN-DA0019951: RNCC: 2 | RNVC: 1
MENTESE,SARI,50MM: RNCC: 2 | RNVC: 1
50 MM: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-040-2846
Angle Bracket

270402846
Y535-75002-334: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-056-9471
Bridge Clamp

270569471
EF01-01-039: RNCC: 2 | RNVC: 1

1 Jun 2012

5340-27-019-3687
Expansion Shield

270193687
10121HD0080: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-6898
Access Cover

270486898
6554-07: RNCC: 2 | RNVC: 1
6554-07: RNCC: 5 | RNVC: 9

19 Feb 2010

5340-27-059-9595
Expansion Plug

270599595
1.HIBM-1H-1426: RNCC: 2 | RNVC: 2

13 Dec 2013

5340-27-038-1020
Mounting Bracket

270381020
83A11-23156-AA: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-026-0735
Mounting Bracket

270260735
2510-ATF-0118: RNCC: 2 | RNVC: 1

31 May 2005

5340-27-040-9123
Flush Catch

270409123
1010FK-2701468: RNCC: 2 | RNVC: 1
24FK1-512700.04: RNCC: 2 | RNVC: 1

8 Apr 2008

5340-27-013-2447
Loop Clamp

270132447
53407777700033: RNCC: 2 | RNVC: 1
KEL.D-40MM: RNCC: 2 | RNVC: 1
KELEPCE 1 1/2": RNCC: 2 | RNVC: 1
KELEPCE 1 1/2": RNCC: 2 | RNVC: 1
90464-16007-00: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-021-0348
Mounting Bracket

270210348
1009.1KI.0283-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7892
Mounting Bracket

270207892
1009.1KI.0264-2*2-9.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4621
Mounting Bracket

270214621
824459: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-8851
Expansion Plug

270088851
4K91832: RNCC: 2 | RNVC: 1

8 Feb 2001

5340-27-019-6257
Webbing Strap

270196257
05001HS0044: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-6494
Mounting Bracket

270186494
1010FG-0612201: RNCC: 2 | RNVC: 1
6494: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-3923
Catch Strike

270143923
YC15 V264A08 AC: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-059-2647
Mounting Bracket

270592647
55RS752976: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-022-5668
Expansion Shield

270225668
CAS6: RNCC: 2 | RNVC: 1

24 Mar 2004

5340-27-038-3298
Mounting Bracket

270383298
389900498001: RNCC: 2 | RNVC: 1

28 Sep 2007

5340-27-033-6474
Access Cover

270336474
40-205-3764: RNCC: 2 | RNVC: 1
40-205-3764: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-040-4517
Mounting Bracket

270404517
11655335-1: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-040-4048
Mounting Bracket

270404048
7966729: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-056-6655
Mounting Bracket

270566655
MK-0000-1625: RNCC: 2 | RNVC: 1
MK-0000-1625: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-020-9512
Mending Plate

270209512
1010FG-0000342: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3745
Flush Catch

270173745
1009.1IS.0068-B/19: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-3128
Mending Plate

270593128
98023677: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-034-9107
Bow Handle

270349107
692100: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-046-9803
Utility Access Door

270469803
MSK1984: RNCC: 2 | RNVC: 1

26 Oct 2009

5340-27-022-1114
Mounting Bracket

270221114
1009 1YK 0213: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-009-3732
Loop Clamp

270093732
3522-1140-2600: RNCC: 2 | RNVC: 1
3522-1140-2600: RNCC: 2 | RNVC: 1

25 Jun 2001

5340-27-040-5205
Crank Handle

270405205
98000-0316: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-054-6702
Mounting Bracket

270546702
55RS752752: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-046-6781
Extension Handle

270466781
Y255-71003-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-055-4169
Flush Catch

270554169
5112851: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-049-4929
Mending Plate

270494929
107522: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-049-8479
Mending Plate

270498479
109162: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-025-9436
Handle Grip

270259436
R79856506: RNCC: 2 | RNVC: 1

6 May 2005

5340-27-006-8275
Access Cover

270068275
062000105: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-025-8839
Mounting Bracket

270258839
1010FK-2808703: RNCC: 2 | RNVC: 1

26 Apr 2005

5340-27-054-6035
Mounting Bracket

270546035
55RS752950: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-016-0181
Handle Grip

270160181
111615074: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-036-2370
Sliding Door Track

270362370
3C46E513A30AD: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-053-2737
Mounting Bracket

270532737
H340102603: RNCC: 2 | RNVC: 1

14 Apr 2011

5340-27-040-4524
Mounting Bracket

270404524
141000.000.0: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-020-3145
Access Cover

270203145
3.06.10.04: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-042-0802
Catch Strike

270420802
46698: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-059-5592
Angle Bracket

270595592
901-DS-130: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-015-0391
Loop Clamp

270150391
7392325: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-3231
Mending Plate

270563231
3834241: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-27-054-7454
Mending Plate

270547454
201881: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-036-7823
Mending Plate

270367823
83A11-55424-AA: RNCC: 2 | RNVC: 1

27 Jun 2007

5340-27-048-8921
Mending Plate

270488921
10029318: RNCC: 2 | RNVC: 1

16 Mar 2010

5340-27-023-8733
Mounting Bracket

270238733
05001FT0086: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-050-0576
Mending Plate

270500576
102838: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-044-7956
Bail Handle

270447956
1010006556: RNCC: 2 | RNVC: 1
TASIMA KULBU: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-021-0748
Flush Catch

270210748
1009.1KI.0147-5*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7847
Mounting Bracket

270207847
1009.1KI.0245-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-8682
Access Cover

270588682
VOE12740445: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-010-2812
Angle Bracket

270102812
10131YD0141: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-056-8635
Mending Plate

270568635
203186: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-018-7013
Mounting Bracket

270187013
1010FK-1911036: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-4736
Mending Plate

270494736
101354: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-043-0984
Swivel Caster

270430984
09013DT0169: RNCC: 2 | RNVC: 1

13 Oct 2008

5340-27-054-5533
Mounting Bracket

270545533
98021880: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-022-1209
Expansion Plug

270221209
10121YT5591: RNCC: 2 | RNVC: 1
7328356: RNCC: 2 | RNVC: 1

11 Feb 2004

5340-27-009-9360
Catch Strike

270099360
98012418-1: RNCC: 2 | RNVC: 1

12 Oct 2001

5340-27-007-3763
Retaining Strap

270073763
8587294: RNCC: 2 | RNVC: 1
Z4500-10016: RNCC: 2 | RNVC: 1
W 700813 S300: RNCC: 2 | RNVC: 1

27 Oct 1999

5340-27-047-2653
Mounting Bracket

270472653
YTA500830PR: RNCC: 2 | RNVC: 1

17 Nov 2009

5340-27-012-5486
Mending Plate

270125486
10131YT0559: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-043-7744
Handle Grip

270437744
2ABEP01020: RNCC: 2 | RNVC: 1

15 Dec 2008

5340-27-047-0418
Utility Access Door

270470418
100X240CM ISI YALITIMLI: RNCC: 2 | RNVC: 1

30 Oct 2009

5340-27-043-2078
Mounting Bracket

270432078
2ABEP00989: RNCC: 2 | RNVC: 1

20 Oct 2008

5340-27-014-3012
Sliding Door Track

270143012
2T14 V25007 BC: RNCC: 2 | RNVC: 1

4 Oct 2002

5340-27-041-8436
Key Holder

270418436
H-12: RNCC: 2 | RNVC: 1

23 Jun 2008

5340-27-038-0522
Mounting Bracket

270380522
MOD.2.23: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-041-9058
Mounting Bracket

270419058
T-04100: RNCC: 2 | RNVC: 1
T-04100: RNCC: 2 | RNVC: 1

30 Jun 2008

5340-27-006-8241
Mounting Bracket

270068241
RRC5295-L: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-007-1737
Retaining Clip

270071737
E 865479 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-056-8627
Mending Plate

270568627
202737: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-049-4694
Bridge Clamp

270494694
104554: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-017-8684
Rod End Connector

270178684
2.HIBM-4L-268/1-44-46: RNCC: 2 | RNVC: 1

30 Sep 2003

5340-27-058-1507
Handle Ferrule

270581507
1010008106: RNCC: 2 | RNVC: 1

14 Dec 2012

5340-27-049-4746
Mending Plate

270494746
105366: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-032-6487
T Bracket

270326487
40-660-7985: RNCC: 2 | RNVC: 1
40-660-7985: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-004-5555
Access Cover

270045555
10091YK5032: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-054-7805
Mending Plate

270547805
203225: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-048-3824
Mounting Bracket

270483824
5421461-A: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-059-7892
Mounting Bracket

270597892
SGB-DKP-M-4-0002: RNCC: 2 | RNVC: 1

8 Nov 2013

5340-27-054-0115
Mounting Bracket

270540115
H233510400: RNCC: 2 | RNVC: 1

15 Jul 2011

5340-27-002-9947
Clamping Catch

270029947
5111506-13: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-054-9882
Mounting Bracket

270549882
5423792: RNCC: 2 | RNVC: 1

27 Oct 2011

5340-27-024-2154
Mounting Bracket

270242154
KMS 0053: RNCC: 2 | RNVC: 1

1 Oct 2004

5340-27-054-2751
Mending Plate

270542751
98019282: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-024-5065
Mounting Bracket

270245065
73-3579-1214: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-039-4741
Mounting Bracket

270394741
897249300151: RNCC: 2 | RNVC: 1

3 Dec 2007

5340-27-055-0872
Catch Strike

270550872
K5E2168: RNCC: 2 | RNVC: 2

3 Nov 2011

5340-27-001-2654
Access Cover

270012654
102430034: RNCC: 3 | RNVC: 2

29 Dec 1993

5340-27-042-5799
Access Cover

270425799
54551544: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-017-0159
Mounting Bracket

270170159
10131YS0937: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-042-5978
Mounting Bracket

270425978
2ABEP00825: RNCC: 2 | RNVC: 1

29 Aug 2008

5340-27-017-5372
Mounting Bracket

270175372
MP000886: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-032-2280
Access Cover

270322280
7395778: RNCC: 2 | RNVC: 1

9 Jun 2006

5340-27-026-0093
Bail Handle

270260093
16001DK0209: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-036-8230
Butt Hinge Leaf

270368230
40.660.7415: RNCC: 2 | RNVC: 1
40.660.7415: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-025-8941
Catch Strike

270258941
897221702051: RNCC: 2 | RNVC: 1

27 Apr 2005

5340-27-015-0439
Loop Clamp

270150439
7997714: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-1534
Mounting Bracket

270511534
16F00-58574-AA: RNCC: 2 | RNVC: 1

7 Oct 2010

5340-27-007-1953
Elastic Strap

270071953
W 700642 S300: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-042-5653
Mending Plate

270425653
54546049: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-053-9188
Bridge Clamp

270539188
DIN-3016-1-D1-41-15-W3-CR: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-054-0460
Bridge Clamp

270540460
98018612: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-055-5445
Mending Plate

270555445
10012182: RNCC: 2 | RNVC: 1

9 Dec 2011

5340-27-055-2413
Mending Plate

270552413
H234304700: RNCC: 2 | RNVC: 1

23 Nov 2011

5340-27-021-9718
Compression Cup

270219718
22606: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-037-2305
Loop Clamp

270372305
B0C314: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-059-3138
Mending Plate

270593138
98023575: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-021-8178
Expansion Plug

270218178
10121YT5556: RNCC: 2 | RNVC: 1

31 Dec 2003

5340-27-027-5198
Mounting Bracket

270275198
6040-0529-1012: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-050-9472
Access Cover

270509472
HS-22554-18: RNCC: 3 | RNVC: 2
HS-22554-18: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-27-044-8568
Bow Handle

270448568
98846508: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-27-056-2986
Flush Catch

270562986
MM-7560-0169: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-27-027-5847
Mounting Bracket

270275847
71B02-36235-AA: RNCC: 2 | RNVC: 1

12 Oct 2005

5340-27-059-5585
Angle Bracket

270595585
901-DS-123: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-038-2099
Access Cover

270382099
1010FK-2702181: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-013-0972
Angle Bracket

270130972
81.97487.0320: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-058-7605
Mounting Bracket

270587605
55RS752625: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-021-4554
Mortise Lock Set

270214554
07002YK0350: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-010-2802
Angle Bracket

270102802
10131YB0754: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-048-4655
Bridge Clamp

270484655
BW302504009D: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-010-5097
Bridge Clamp

270105097
86VB 5270 AA: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-053-9238
Mending Plate

270539238
103244: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-013-0967
Mending Plate

270130967
81.97487.0363: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-013-9575
Mounting Bracket

270139575
6040-0932-8015: RNCC: 2 | RNVC: 1
6040-0932-8015: RNCC: 2 | RNVC: 1

16 Aug 2002

5340-27-059-0375
Butt Hinge Leaf

270590375
1010FMA-0000882-20: RNCC: 2 | RNVC: 1

20 May 2013

5340-27-049-9677
Mending Plate

270499677
HD110591: RNCC: 2 | RNVC: 2
HD110591: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-041-8738
Mounting Bracket

270418738
14200: RNCC: 2 | RNVC: 1
14200: RNCC: 2 | RNVC: 1

26 Jun 2008

5340-27-023-5435
Webbing Strap

270235435
8690510: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-010-9801
Rod End Connector

270109801
73 3579 3705: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-033-9331
Loop Clamp

270339331
509707031001: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-051-1438
Mounting Bracket

270511438
16F10-12188-AA: RNCC: 2 | RNVC: 1

6 Oct 2010

5340-27-050-5113
Bridge Clamp

270505113
DIN-3016-1-D1-17-15-W3-CR: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-025-2794
Angle Bracket

270252794
209-031-353-1: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-048-9650
Mending Plate

270489650
103687: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-054-6721
Mounting Bracket

270546721
55RS360155: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-045-3292
Mending Plate

270453292
2701A013: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-27-054-6160
Mounting Bracket

270546160
1010FMA-0000494: RNCC: 2 | RNVC: 1

3 Oct 2011

5340-27-049-4840
Mending Plate

270494840
107560-107: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-028-7555
Mounting Bracket

270287555
884-5810-939: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-047-2221
Mounting Bracket

270472221
13C00-56108-AA: RNCC: 2 | RNVC: 1

12 Nov 2009

5340-27-058-9910
Access Cover

270589910
CH81946: RNCC: 3 | RNVC: 2
CH81946: RNCC: 3 | RNVC: 2

13 May 2013

5340-27-038-7397
Rod End Clevis

270387397
10091YC0019: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-038-7328
Strap Hinge

270387328
10091YS1168: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-053-3107
Mounting Bracket

270533107
H341137300: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-054-1032
Sliding Door Track

270541032
YC15V25004CJ: RNCC: 2 | RNVC: 1

26 Jul 2011

5340-27-015-8703
Butt Hinge

270158703
60 MM: RNCC: 2 | RNVC: 1
99999-NIIN-DA0051969: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-053-9038
Coat And Hat Hook

270539038
F32/18690: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-057-5736
Mounting Bracket

270575736
M539F352100000: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-054-6610
Mounting Bracket

270546610
55RS752817: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-024-4707
Mounting Bracket

270244707
23395: RNCC: 2 | RNVC: 1

2 Nov 2004

5340-27-029-0075
Mounting Bracket

270290075
10121YP5600: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-045-6520
Utility Access Door

270456520
1200X2100MM PVC KAPI: RNCC: 2 | RNVC: 1

26 May 2009

5340-27-049-5008
Mending Plate

270495008
108053: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-041-2256
Flush Catch

270412256
5340KK0108286: RNCC: 2 | RNVC: 1

8 May 2008

5340-27-055-7861
Access Cover

270557861
14328104: RNCC: 2 | RNVC: 2

4 Jan 2012

5340-27-005-1574
Loop Clamp

270051574
1010001908: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-1355
Detent Plunger

270541355
KZO-U801: RNCC: 2 | RNVC: 2
KZO-U801: RNCC: 5 | RNVC: 9

28 Jul 2011

5340-27-021-5351
Mending Plate

270215351
1010FK0000340: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-2970
Mounting Bracket

270242970
1010FG-1831163: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-047-5757
Bow Handle

270475757
13C25-72310-AB: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-059-6607
Filler Opening Cap

270596607
83X59 MM: RNCC: 2 | RNVC: 1
18HML40S01242: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-049-8480
Mending Plate

270498480
109163: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-022-8685
Loop Clamp

270228685
05001FK0096: RNCC: 2 | RNVC: 1

29 Apr 2004

5340-27-045-9307
Loop Clamp

270459307
78299083: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-046-7767
Catch Strike

270467767
898012203051: RNCC: 2 | RNVC: 1

7 Oct 2009

5340-27-024-3883
Angle Bracket

270243883
10131YS2055: RNCC: 2 | RNVC: 1

20 Oct 2004

5340-27-048-9610
Mending Plate

270489610
102824: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-035-2833
Bow Handle

270352833
3C46E002K88ABW: RNCC: 2 | RNVC: 1

6 Mar 2007

5340-27-021-0176
Lever Bracket

270210176
1009.1KI.0345-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-6741
Mending Plate

270296741
2B0-28336-00-00: RNCC: 5 | RNVC: 9

1 May 2006

5340-27-008-8551
Catch Strike

270088551
98001466: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-049-8473
Mending Plate

270498473
108296: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-040-8930
Mending Plate

270408930
ME411924: RNCC: 2 | RNVC: 1
MK411924: RNCC: 2 | RNVC: 1

7 Apr 2008

5340-27-016-5353
Angle Bracket

270165353
98011330: RNCC: 2 | RNVC: 1

4 Feb 2003

5340-27-011-0543
Access Cover

270110543
4494303007: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-029-0809
Flush Catch Claw

270290809
10121YT5497: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-029-3885
Mending Plate

270293885
1010005628: RNCC: 2 | RNVC: 1

24 Mar 2006

5340-27-046-6874
Mortise Lock

270466874
76 LIK: RNCC: 2 | RNVC: 1
BILYALI BAREL: RNCC: 2 | RNVC: 1

29 Sep 2009

5340-27-006-9505
Mounting Bracket

270069505
95AT A24198 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-022-8730
Masking Plate

270228730
BIF750T13: RNCC: 2 | RNVC: 1
BIF750T13: RNCC: 5 | RNVC: 9

29 Apr 2004

5340-27-018-3490
Flush Catch

270183490
10121YM5572: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-7434
Mounting Bracket

270587434
VOE12742827: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-27-049-0212
Mounting Bracket

270490212
J-FA9760: RNCC: 2 | RNVC: 1

25 Mar 2010

5340-27-024-0238
Thumb Latch

270240238
4495404032: RNCC: 2 | RNVC: 1

8 Sep 2004

5340-27-051-4780
Mounting Bracket

270514780
400261-004: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-27-020-8485
Mounting Bracket

270208485
111615963: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-4880
Bow Handle

270594880
13C40-72300-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

Load More Results