What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 8 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 8 of 53

5340-27-059-5016
Access Cover

270595016
VOE12748847: RNCC: 3 | RNVC: 2
VOE12748847: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-27-006-9199
Mounting Bracket

270069199
91AG 2280 AC: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-048-9620
Mending Plate

270489620
103648: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-059-6837
Loop Clamp

270596837
901-KL-402: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-020-7872
Mending Plate

270207872
1009.1KI.0338-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-4807
Handle Grip

270354807
TTN23: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-015-0364
Loop Clamp

270150364
7335624: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-9375
Access Cover

270509375
2311 2047 00: RNCC: 3 | RNVC: 2
2311 2047 00: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-27-020-8474
Doorknob

270208474
W3776186US: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-7110
Flush Catch

270577110
NEVPA K35: RNCC: 5 | RNVC: 9

2 Oct 2012

5340-27-016-6993
Access Cover

270166993
98010472: RNCC: 2 | RNVC: 1

28 Feb 2003

5340-27-042-9497
Leakproof Seal Plug

270429497
40.687.5016: RNCC: 2 | RNVC: 1
40.687.5016: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-046-1390
Mending Plate

270461390
ELKAR-CL-CAM-BAGAJ-PLK4000-30010: RNCC: 2 | RNVC: 2

13 Jul 2009

5340-27-025-7889
Loop Clamp

270257889
5002409244: RNCC: 2 | RNVC: 1

12 Apr 2005

5340-27-053-0167
Mounting Bracket

270530167
43 48 031 700: RNCC: 2 | RNVC: 2

16 Mar 2011

5340-27-023-5413
Mounting Bracket

270235413
2ABMK 00502: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-017-7139
Handle Ferrule

270177139
C040 0401K4: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-033-0733
Mounting Bracket

270330733
42185375: RNCC: 2 | RNVC: 1

16 Oct 2006

5340-27-038-7396
Handle Grip

270387396
10091MT0088: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-029-0074
Mounting Bracket

270290074
M52T3011R450223: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-047-5090
Mortise Lock

270475090
62MM: RNCC: 2 | RNVC: 1
62MM: RNCC: 2 | RNVC: 1

7 Dec 2009

5340-27-036-0964
Mounting Bracket

270360964
1010FK-2711865: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-035-9775
Plug Button

270359775
183612460: RNCC: 2 | RNVC: 1

13 Apr 2007

5340-27-044-5632
Mounting Bracket

270445632
Y532-66023-200: RNCC: 2 | RNVC: 1

17 Feb 2009

5340-27-060-0500
Mounting Bracket

270600500
MM-7490-0464: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-022-6334
Bow Handle

270226334
20336T: RNCC: 2 | RNVC: 1

1 Apr 2004

5340-27-020-7570
Mending Plate

270207570
1009.1KI.0123-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-0192
Tee Hinge

270070192
91AB B600M36 AB: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-007-3675
Retaining Clip

270073675
W 700706 S300: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-006-8892
Brake Valve Bracket

270068892
A 425 290 03 33: RNCC: 2 | RNVC: 1
A 425 290 03 33: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-016-9486
Mounting Bracket

270169486
RADYATOR KONSOL 5X20 CM: RNCC: 2 | RNVC: 1

18 Apr 2003

5340-27-028-8455
Mounting Bracket

270288455
10131YS1663: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-017-3883
Mounting Bracket

270173883
1009.1IS.0067-21: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-012-8536
Mounting Bracket

270128536
10131YS0922: RNCC: 2 | RNVC: 1

27 Mar 2002

5340-27-003-9198
Access Cover

270039198
07001MN0213: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-021-8648
Mending Plate

270218648
1009 1AD 0023: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-024-7761
Catch Strike

270247761
71B22-55066-AA: RNCC: 2 | RNVC: 1

2 Dec 2004

5340-27-007-9054
Bridge Clamp

270079054
10131YK0083: RNCC: 2 | RNVC: 1

18 Apr 2000

5340-27-057-4160
Loop Clamp

270574160
909621707: RNCC: 5 | RNVC: 9

3 Aug 2012

5340-27-007-1975
Retaining Clip

270071975
W 700985 S300: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-007-1827
Access Cover

270071827
E 852078 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-005-1749
Rod End Connector

270051749
1010002365: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-005-1682
Access Cover

270051682
1010002181: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-027-8869
Catch Strike

270278869
72A06-73488-AA: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-025-4677
Bow Handle

270254677
C70A77: RNCC: 2 | RNVC: 1

21 Mar 2005

5340-27-051-4149
Mending Plate

270514149
108594: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-022-1789
Mounting Bracket

270221789
MP001756: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-017-4874
Block Clamp

270174874
3309-00733: RNCC: 2 | RNVC: 1
H-39-6472-50: RNCC: 2 | RNVC: 1

1 Jul 2003

5340-27-027-4834
Flush Catch

270274834
6009-0534-1016: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-020-7532
Mounting Bracket

270207532
1009.1KI.0339-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3549
Rod End Clevis

270173549
1009.1IS.0068-B/35: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-035-4955
Mounting Bracket

270354955
1.HIBM-1I-2306D41: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-021-0333
Mounting Bracket

270210333
1009.1KI.0339-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-0351
Loop Clamp

270150351
7057334: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-037-9397
Mounting Bracket

270379397
911-06-002: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-006-2110
Mounting Bracket

270062110
ST2-503A/2: RNCC: 2 | RNVC: 1

18 Apr 1998

5340-27-032-6518
T Bracket

270326518
40-660-7635: RNCC: 2 | RNVC: 1
40-660-7635: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-008-3308
Access Cover

270083308
98000422: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-049-9464
Mechanical Stop

270499464
STOPER: RNCC: 2 | RNVC: 1

15 Jun 2010

5340-27-054-7001
Mending Plate

270547001
98021398: RNCC: 3 | RNVC: 2

7 Oct 2011

5340-27-057-7105
Loop Clamp

270577105
AR533T720220000: RNCC: 2 | RNVC: 1

2 Oct 2012

5340-27-023-8354
Rod End Clevis

270238354
7.13.04.11: RNCC: 2 | RNVC: 1

11 Aug 2004

5340-27-048-5863
Bow Handle

270485863
MC241381Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-059-2715
Loop Clamp

270592715
55RS752604: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-052-9946
Mounting Bracket

270529946
80 1E 000 02R: RNCC: 2 | RNVC: 2

15 Mar 2011

5340-27-041-4343
Mending Plate

270414343
4896952: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-027-6294
Mending Plate

270276294
72B04-60053-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-060-0556
Mounting Bracket

270600556
MN-7490-0050: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-044-8156
Stand Base

270448156
BF0-4390-040000: RNCC: 5 | RNVC: 9

16 Mar 2009

5340-27-050-0723
Mending Plate

270500723
108213: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-050-0704
Mending Plate

270500704
104460: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-007-1705
Retaining Clip

270071705
E 860501 S100: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-056-8679
Mending Plate

270568679
202267: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-005-1718
Access Cover

270051718
1010002032: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-3470
Mending Plate

270563470
3831868: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-028-1535
Bow Handle

270281535
14C01-57105-AA: RNCC: 2 | RNVC: 1

7 Dec 2005

5340-27-020-7610
Mounting Bracket

270207610
3011R218000.01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-9241
Mounting Bracket

270069241
91AG A624K27 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-013-7967
Expansion Plug

270137967
W704503 S300: RNCC: 2 | RNVC: 1

24 Jul 2002

5340-27-023-1173
Mounting Bracket

270231173
1010FK-0000360: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-042-3666
Utility Access Door

270423666
202X260CM: RNCC: 2 | RNVC: 1

11 Aug 2008

5340-27-050-1569
Mending Plate

270501569
107424: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-047-1385
Catch Strike

270471385
73B01-61095-AA: RNCC: 1 | RNVC: 2

6 Nov 2009

5340-27-023-0912
Mounting Bracket

270230912
24123-1360: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-058-6551
Mending Plate

270586551
ADOP-SHELTER-280-HAP: RNCC: 2 | RNVC: 1

5 Mar 2013

5340-27-004-5110
Access Cover

270045110
10121YK5094: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-036-1301
Mending Plate

270361301
3C46003K57AA: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-036-5856
Mounting Bracket

270365856
C01AJ52: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-026-3339
Expansion Shield

270263339
10131MD0220: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-041-5997
Mounting Bracket

270415997
7255652: RNCC: 2 | RNVC: 1

6 Jun 2008

5340-27-056-5315
Access Cover

270565315
3835015: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-015-5299
Handle Grip

270155299
10131YT0553: RNCC: 2 | RNVC: 1
10131F: RNCC: 2 | RNVC: 1
10131YT0553: RNCC: 5 | RNVC: 9

10 Dec 2002

5340-27-024-1309
Angle Bracket

270241309
F-1563: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-040-2536
Mending Plate

270402536
8200751437: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-058-4885
Ball Socket Seat

270584885
CH79332: RNCC: 3 | RNVC: 2
CH79332: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-27-015-0558
Loop Clamp

270150558
7763527: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-5321
Access Cover

270565321
3835035: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-042-9671
Mounting Bracket

270429671
40.205.3447: RNCC: 2 | RNVC: 1
40.205.3447: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-036-1553
Mortise Lock

270361553
1923: RNCC: 2 | RNVC: 1

4 May 2007

5340-27-013-3122
Handle Grip

270133122
TDV 1240/010-50, A8/6-F: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-048-6545
Access Cover

270486545
7664: RNCC: 2 | RNVC: 1
7664: RNCC: 5 | RNVC: 9

18 Feb 2010

5340-27-056-3968
Access Cover

270563968
3807063: RNCC: 3 | RNVC: 2
3807063: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-27-059-0304
Loop Clamp

270590304
VOE652629: RNCC: 3 | RNVC: 2
VOE652629: RNCC: 3 | RNVC: 2

17 May 2013

5340-27-038-7209
Flush Catch Claw

270387209
10091YP1028: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-008-7519
Mending Plate

270087519
98000592: RNCC: 2 | RNVC: 1

5 Jan 2001

5340-27-027-2769
Mounting Bracket

270272769
20-01-567-001: RNCC: 2 | RNVC: 1

22 Sep 2005

5340-27-041-9453
Mounting Bracket

270419453
5-007-021: RNCC: 1 | RNVC: 2

2 Jul 2008

5340-27-015-0381
Loop Clamp

270150381
7389080: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0417
Loop Clamp

270150417
7725357: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-047-5742
Mounting Bracket

270475742
16F00-71514-AA: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-041-3046
Mounting Bracket

270413046
1.HIBM-1I-2735: RNCC: 2 | RNVC: 1

13 May 2008

5340-27-009-6718
Mounting Bracket

270096718
8120 93: RNCC: 2 | RNVC: 1

15 Aug 2001

5340-27-022-3254
Expansion Plug

270223254
10121YT5625: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-047-9178
Mending Plate

270479178
6T-9929: RNCC: 3 | RNVC: 2

23 Dec 2009

5340-27-021-4000
Mounting Bracket

270214000
1012.1HSCA.02-43: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-9316
Loop Clamp

270459316
8AT6100038: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-042-0788
Mounting Bracket

270420788
898003048001: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-045-7692
Angle Bracket

270457692
10029215: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-007-1150
Webbing Strap

270071150
KOLON 40X2MM: RNCC: 2 | RNVC: 1

13 Aug 1999

5340-27-053-9666
Mounting Bracket

270539666
55RS650843: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-034-6310
Mounting Bracket

270346310
LCT14T238AA: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-018-6807
Mounting Bracket

270186807
1010FG-1803250: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-6636
Mounting Bracket

270546636
55RS760061: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-054-5800
Mounting Bracket

270545800
C70K32: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-023-0872
Bow Handle

270230872
20416T: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-055-5753
Access Cover

270555753
14328504: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-049-5089
Mounting Bracket

270495089
108082: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-050-7079
Mounting Bracket

270507079
62400: RNCC: 2 | RNVC: 1

19 Aug 2010

5340-27-050-9683
Access Cover

270509683
63D-45215-00: RNCC: 3 | RNVC: 2
63D-45215-00: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-27-056-7720
Mounting Bracket

270567720
SH-TZ-03-010: RNCC: 2 | RNVC: 1

10 May 2012

5340-27-044-9013
Catch Strike

270449013
98846301: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-27-038-8574
Mounting Bracket

270388574
2ABEP00293: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-013-3100
Mending Plate

270133100
88.60020.2020: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-010-0811
Access Cover

270100811
DZJB000012: RNCC: 2 | RNVC: 1

31 Oct 2001

5340-27-053-6347
Loop Clamp

270536347
10131YK0502: RNCC: 2 | RNVC: 1

30 May 2011

5340-27-049-4749
Mounting Bracket

270494749
105365: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-024-2770
Mounting Bracket

270242770
73-3579-2374: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-053-8397
Lock Bolt

270538397
C161-800030: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-059-6811
Loop Clamp

270596811
901-KL-393: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-052-7577
Mounting Bracket

270527577
10046599: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-27-036-5884
Mechanical Stop

270365884
10003841: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-042-9452
Safety Cable Kit

270429452
40.270.0420: RNCC: 2 | RNVC: 1
40.270.0420: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-029-7377
Mending Plate

270297377
86221-52050: RNCC: 5 | RNVC: 9

8 May 2006

5340-27-044-0088
Mounting Bracket

270440088
5340-TJ-03322: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-014-9836
Flush Lock

270149836
10091YK0352: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-048-9906
Mending Plate

270489906
105445: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-039-1678
Mending Plate

270391678
N25 PLAKA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-019-6146
Snap Hook

270196146
05001HK0009: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-046-7090
Mounting Bracket

270467090
2ABEP01158: RNCC: 2 | RNVC: 1

2 Oct 2009

5340-27-045-4843
Mending Plate

270454843
MR328202: RNCC: 3 | RNVC: 2

12 May 2009

5340-27-054-2106
Utility Access Door

270542106
RC-560A: RNCC: 2 | RNVC: 2

9 Aug 2011

5340-27-059-3042
Access Cover

270593042
98019105-18: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-026-2611
Mounting Bracket

270262611
06319: RNCC: 2 | RNVC: 1

23 Jun 2005

5340-27-057-7092
Loop Clamp

270577092
AR533T720120000: RNCC: 2 | RNVC: 1

28 Sep 2012

5340-27-038-2757
Access Cover

270382757
10006244: RNCC: 2 | RNVC: 1

26 Sep 2007

5340-27-059-7036
Loop Clamp

270597036
901-KL-373: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-058-3006
Mending Plate

270583006
0421 5465: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-054-6633
Mounting Bracket

270546633
57RS309655: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-055-6968
Mounting Bracket

270556968
87714778: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-045-3291
Mending Plate

270453291
MN107597: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-27-013-6707
Doorknob

270136707
KUMRU 2289: RNCC: 2 | RNVC: 1

11 Jul 2002

5340-27-058-3810
Mending Plate

270583810
CV71742: RNCC: 2 | RNVC: 1

18 Jan 2013

5340-27-054-3644
Mending Plate

270543644
98021384: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-038-8571
Mounting Bracket

270388571
2ABEP00292: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-047-0720
Mounting Bracket

270470720
13C00-56167-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-056-8695
Mending Plate

270568695
201845: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-008-1690
Handle Grip

270081690
27723: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-026-2832
Latch Bar

270262832
5000771738: RNCC: 2 | RNVC: 1

24 Jun 2005

5340-27-054-2818
Bridge Clamp

270542818
SX12070-090C7W4: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-059-6833
Loop Clamp

270596833
901-KL-399: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-055-2590
Utility Access Door

270552590
UG 037500 POZ-20: RNCC: 2 | RNVC: 1
UG 037500 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-034-1989
Metal Grille

270341989
100037: RNCC: 2 | RNVC: 1

15 Dec 2006

5340-27-015-0424
Loop Clamp

270150424
7743749: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-4127
Mending Plate

270514127
108034: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-034-7840
Mending Plate

270347840
13274832: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-043-8021
Mounting Bracket

270438021
12E00-01515-AB: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-028-7855
Mounting Bracket

270287855
40007900: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-057-5475
Flush Catch Claw

270575475
174196670: RNCC: 2 | RNVC: 1

31 Aug 2012

5340-27-015-8689
Rim Lock Set

270158689
99999-NIIN-DA0054408: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-006-9503
Mounting Bracket

270069503
95AT A24196 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-051-5622
Mending Plate

270515622
DIN-3015K-APK-3-W1-ZN: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-013-2448
Loop Clamp

270132448
90464-16005-00: RNCC: 2 | RNVC: 1
32MM DEMIR HALKA KELEPCE: RNCC: 2 | RNVC: 1
53407777700034: RNCC: 2 | RNVC: 1
KEL.D-52MM: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-058-1517
Mounting Bracket

270581517
1010FMA-1802023: RNCC: 2 | RNVC: 1

17 Dec 2012

5340-27-036-0868
Butt Hinge

270360868
S5675-00: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-037-8079
Mounting Bracket

270378079
83A11-38040-AA: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-020-6931
Expansion Shield

270206931
5340DUBE9880005: RNCC: 2 | RNVC: 1
12E00-72127-AA: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7597
Access Cover

270227597
1010FG-0000101: RNCC: 2 | RNVC: 1

16 Apr 2004

5340-27-026-6098
Catch Strike

270266098
10131YT2021: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-007-3994
Mounting Bracket

270073994
95AG A18D317 AC: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-040-5208
Mounting Bracket

270405208
2854261-1: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-018-7043
Mounting Bracket

270187043
1010FG-2201624: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-6388
Mounting Bracket

270186388
1010FG-0312902: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-8629
Mending Plate

270568629
202736: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-042-7186
Flush Catch Claw

270427186
1010006328: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-051-4142
Mending Plate

270514142
108250: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-019-5391
Caster Wheel

270195391
07002YT0184: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-0546
Access Cover

270110546
7115311068: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-2142
Mounting Bracket

270212142
1012.1HSCA.03-18: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-9477
Clevis And U-Bolt

270229477
05001FC0012: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-055-8669
Flush Lock

270558669
S91/00631: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-028-5576
Mounting Bracket

270285576
72A08-58152-AA: RNCC: 2 | RNVC: 1

16 Jan 2006

5340-27-013-9492
Angle Bracket

270139492
6040-0932-8022: RNCC: 2 | RNVC: 1
6040-0932-8022: RNCC: 2 | RNVC: 1

15 Aug 2002

5340-27-025-8285
Mounting Bracket

270258285
1010FG-0612223: RNCC: 2 | RNVC: 1

15 Apr 2005

5340-27-004-7894
Access Cover

270047894
10091YK5062: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-041-3757
Mending Plate

270413757
7253481: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-023-0743
Lock Key

270230743
150130461: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-059-6626
Loop Clamp

270596626
901-KL-368: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-048-6700
Bridge Clamp

270486700
81.97420-0157: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-051-6721
Catch Strike

270516721
16F10-56168-AA: RNCC: 2 | RNVC: 1

12 Nov 2010

5340-27-034-9238
Mounting Bracket

270349238
40-660-7504: RNCC: 2 | RNVC: 1
40-660-7504: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-059-0246
Loop Clamp

270590246
VOE20711847: RNCC: 3 | RNVC: 2
VOE20711847: RNCC: 3 | RNVC: 2

16 May 2013

5340-27-014-2578
Bridge Clamp

270142578
52RS000538: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-059-3676
Access Cover

270593676
VOE24426064: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-27-021-4107
Mounting Bracket

270214107
1009.1KI.0266-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-0795
Key Holder

270470795
ANAHTARLIK,METAL: RNCC: 2 | RNVC: 1

3 Nov 2009

5340-27-059-6727
Loop Clamp

270596727
901-KL-342: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-026-8218
Access Cover

270268218
1010FG-1801301: RNCC: 2 | RNVC: 1

3 Aug 2005

5340-27-051-1731
Clamping Catch

270511731
YM036: RNCC: 5 | RNVC: 9

8 Oct 2010

5340-27-040-3361
Mounting Bracket

270403361
11616158: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-050-0031
Utility Access Door

270500031
76X25X205CM,KASALI: RNCC: 2 | RNVC: 1

17 Jun 2010

5340-27-045-8402
Expansion Plug

270458402
115.5208.309: RNCC: 3 | RNVC: 2

15 Jun 2009

5340-27-020-7852
Mounting Bracket

270207852
1009.1KI.0130-4*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-3734
Mounting Bracket

270483734
5421591: RNCC: 2 | RNVC: 1

4 Feb 2010

5340-27-040-2824
Mounting Bracket

270402824
Y535-75005-208: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-035-8613
Mounting Bracket

270358613
846508: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-008-0079
Webbing Strap

270080079
50X1MM: RNCC: 2 | RNVC: 1

30 May 2000

5340-27-059-7655
Mounting Bracket

270597655
9999-0000-0341: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-017-6932
Mending Plate

270176932
H-39-2458-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-009-2898
Bridge Clamp

270092898
81.42940.0245: RNCC: 2 | RNVC: 1

7 Jun 2000

5340-27-007-4201
Mounting Bracket

270074201
93AG A513A06 AC: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-021-4240
Mounting Bracket

270214240
07002YP0501: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-9362
Synchro Clamp

270539362
H343011200: RNCC: 2 | RNVC: 1

8 Jul 2011

5340-27-022-8100
Compression Cup

270228100
05001DK0364: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-024-0094
Bail Handle

270240094
98013625: RNCC: 2 | RNVC: 1

7 Sep 2004

5340-27-055-4924
Access Cover

270554924
58RS510205: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-008-1681
Handle Grip

270081681
27735: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-034-8921
Bridge Clamp

270348921
12A14-32054-AA: RNCC: 2 | RNVC: 1

14 Feb 2007

5340-27-047-2800
Bridge Clamp

270472800
7700083454: RNCC: 2 | RNVC: 1

18 Nov 2009

5340-27-001-7425
Vent Plug

270017425
CESSNA-185-PART0541139: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-025-8925
Bow Handle

270258925
897098476201: RNCC: 2 | RNVC: 1

27 Apr 2005

5340-27-050-1567
Mending Plate

270501567
107421: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-021-1720
Angle Bracket

270211720
1010FK-1803438: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-1946
Mounting Bracket

270231946
3122 434 01770: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-044-5764
Handle Grip

270445764
BA4-1894-030000: RNCC: 2 | RNVC: 1
BA4-1894-030000: RNCC: 5 | RNVC: 9

18 Feb 2009

5340-27-057-8818
Mounting Bracket

270578818
16203-ZY3-000: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-033-6336
Access Cover

270336336
901-GK-29: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-059-8476
Mounting Bracket

270598476
1010FMA-0000624: RNCC: 2 | RNVC: 1

19 Nov 2013

5340-27-007-3529
Retaining Clip

270073529
W 702938 S300: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-023-9576
Filler Opening Cap

270239576
05001FK0179: RNCC: 2 | RNVC: 1

25 Aug 2004

5340-27-021-0814
Angle Bracket

270210814
ASR1117-L: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0358
Mounting Bracket

270210358
1009.1KI.0117-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-8350
Flush Catch

270498350
7335791015: RNCC: 2 | RNVC: 1
138-28: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-059-6351
Loop Clamp

270596351
901-KL-347: RNCC: 2 | RNVC: 1

20 Sep 2013

5340-27-010-2737
Mounting Bracket

270102737
10131YS0750: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-017-3661
Mending Plate

270173661
1009.1IS.0087-13: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-026-1707
Mounting Bracket

270261707
1010FG-1804481: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-046-3905
Mending Plate

270463905
NTC2681-L: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-020-6309
Stovepipe Shield

270206309
1009.1KI.0357-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-1073
Mending Plate

270511073
103052: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-052-5545
Bow Handle

270525545
80 95 400 11R: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-017-3619
Mending Plate

270173619
1009.1IS.0039-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-5027
Mounting Bracket

270215027
1009.1KI.0303-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-1366
Sliding Door Track

270551366
1C15V25001BF: RNCC: 2 | RNVC: 1

15 Nov 2011

5340-27-013-0028
Mounting Bracket

270130028
98011193: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-047-5652
Mortise Lock

270475652
90MM: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-009-0810
Mounting Bracket

270090810
98005213: RNCC: 2 | RNVC: 1

25 Apr 2001

5340-27-009-9373
Angle Bracket

270099373
98012496: RNCC: 2 | RNVC: 1

15 Oct 2001

5340-27-053-8272
Utility Access Door

270538272
C173-110001: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-058-8734
Access Cover

270588734
VOE12739486: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-034-5973
Loop Clamp

270345973
601018-F01: RNCC: 2 | RNVC: 1

25 Jan 2007

5340-27-041-4097
Utility Access Door

270414097
88X193 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-024-4887
Mounting Bracket

270244887
27365-26600: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-017-3616
Flush Lock

270173616
1009.1IS.0062-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-020-7551
Mounting Bracket

270207551
1009.1KI.0030-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7343
Mending Plate

270227343
23V2212000: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-005-9917
Strap End Clip

270059917
E866024S: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-27-038-2168
Access Cover

270382168
3584006: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-055-3379
Mounting Bracket

270553379
1692-0029: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-058-0831
Mending Plate

270580831
202299: RNCC: 2 | RNVC: 1

6 Dec 2012

5340-27-025-1550
Mounting Bracket

270251550
1010FK-1802081: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-007-3905
Mounting Bracket

270073905
95WT 7C281 AB: RNCC: 2 | RNVC: 1

31 Oct 1999

5340-27-056-8638
Mending Plate

270568638
201510: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-045-7451
Angle Bracket

270457451
10029126: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-032-4969
Bow Handle

270324969
12A14-72301-AA: RNCC: 2 | RNVC: 1
73B10-55707-AA: RNCC: 2 | RNVC: 1

25 Jul 2006

5340-27-046-6804
Access Cover

270466804
Y532-67400-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-033-9328
Loop Clamp

270339328
897064484151: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-006-0856
Access Cover

270060856
KAL3040: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-058-1728
Mending Plate

270581728
1460126003: RNCC: 2 | RNVC: 1

18 Dec 2012

5340-27-033-5767
Mounting Bracket

270335767
3258710-500: RNCC: 2 | RNVC: 1

30 Oct 2006

5340-27-039-8082
Mounting Bracket

270398082
BMT300-M3: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-053-3129
Mounting Bracket

270533129
H341155001: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-026-8596
Mounting Bracket

270268596
6040-2332-8016: RNCC: 2 | RNVC: 1

8 Aug 2005

5340-27-015-7222
Flush Lock

270157222
10091KI0237: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-0051
Mounting Bracket

270200051
03186700: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-6245
Access Cover

270596245
VOE12746293: RNCC: 3 | RNVC: 2
VOE12746293: RNCC: 3 | RNVC: 2

18 Sep 2013

5340-27-054-4241
Mending Plate

270544241
98020957: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-054-6656
Mounting Bracket

270546656
55RS752965: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-053-9698
Mending Plate

270539698
98017331: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-034-6375
Bow Handle

270346375
535A15: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-022-7002
Bridge Clamp

270227002
5146 03: RNCC: 2 | RNVC: 1

9 Apr 2004

5340-27-015-6785
Loop Clamp

270156785
05001FK0063: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-004-7941
Access Cover

270047941
10091YK5068: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-058-9078
Access Cover

270589078
M873E310226000: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-021-0630
Mounting Bracket

270210630
820745: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-2140
Mounting Bracket

270212140
1012.1HSCA.04-13: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-1688
Utility Access Door

270411688
90X200CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1
90X200CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1
AK-00: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-023-2912
Handle Grip

270232912
98013210: RNCC: 2 | RNVC: 1

16 Jun 2004

5340-27-050-0588
Mending Plate

270500588
103502: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-008-2505
Angle Bracket

270082505
98010313: RNCC: 2 | RNVC: 1

29 Aug 2000

5340-27-027-8911
Mounting Bracket

270278911
2ABM1MK0094: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-048-9647
Mending Plate

270489647
103683: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-033-6533
Angle Bracket

270336533
40-205-4054: RNCC: 2 | RNVC: 1
40-205-4054: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-050-0730
Mending Plate

270500730
108271: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-019-2208
Loop Clamp

270192208
11001DK0258: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1595
Control Rod

270051595
1010000255: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-001-7564
Loop Clamp

270017564
TM55-1520-210-3EAB-700-D14: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-056-8172
Mending Plate

270568172
201873: RNCC: 2 | RNVC: 1

15 May 2012

5340-27-019-1344
Loop Clamp

270191344
83974400017: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2554
Mending Plate

270402554
8200182999: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-021-4034
Mounting Bracket

270214034
1012.1HSCA.03-14: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-0037
Mounting Bracket

270200037
00425700: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-0698
Mending Plate

270500698
104443: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-047-8901
Mounting Bracket

270478901
16F00-71530-AA: RNCC: 2 | RNVC: 1

22 Dec 2009

5340-27-021-3362
Mending Plate

270213362
1012.1HSCA.03-43: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-9093
Bow Handle

270139093
388888079001: RNCC: 2 | RNVC: 1

17 Oct 2002

5340-27-023-9156
Mounting Bracket

270239156
8365040: RNCC: 2 | RNVC: 1

20 Aug 2004

5340-27-056-2938
Mounting Bracket

270562938
MM-7560-0064: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-27-034-6376
Bow Handle

270346376
535A16: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-039-6291
Handle Grip

270396291
YTE.190.EM.002.025: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-050-2842
Bow Handle

270502842
A2108500754: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-27-007-1859
Retaining Clip

270071859
E 866239 S100: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-042-1943
Angle Bracket

270421943
2.HIBM-4L-592/2-14: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-056-1658
Bridge Clamp

270561658
103348: RNCC: 2 | RNVC: 2

27 Feb 2012

5340-27-018-6236
Mounting Bracket

270186236
1010FG-1401856: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4339
Mounting Bracket

270214339
1012.1HSCA.03-59: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-4469
Cover Strip

270594469
M576D251220100: RNCC: 2 | RNVC: 1

6 Aug 2013

5340-27-055-2182
Mounting Bracket

270552182
1692-0117: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-27-037-3506
Mending Plate

270373506
73A15-59510-AA: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-059-1092
Mending Plate

270591092
3794369: RNCC: 2 | RNVC: 1

28 May 2013

5340-27-003-9217
Loop Clamp

270039217
07001MN0363: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-034-5994
Elastic Strap

270345994
SMP735: RNCC: 2 | RNVC: 1

25 Jan 2007

5340-27-045-4312
Stand Base

270454312
357N1548C: RNCC: 2 | RNVC: 2
357N1548C: RNCC: 2 | RNVC: 2

7 May 2009

5340-27-023-1469
Expansion Plug

270231469
105068: RNCC: 2 | RNVC: 1
10121YT5650: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-021-3998
Mounting Bracket

270213998
1012.1HSCA.02-16: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-3689
Flush Catch

270223689
10131YM2009: RNCC: 2 | RNVC: 1

2 Mar 2004

5340-27-021-4001
Mounting Bracket

270214001
1012.1HSCA.03-19: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-3532
Lock-Release Lever

270263532
901-YK-60-1: RNCC: 2 | RNVC: 1

30 Jun 2005

5340-27-052-2118
Mounting Bracket

270522118
303332: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-034-7333
Truss Fairlead

270347333
213F19: RNCC: 2 | RNVC: 1

5 Feb 2007

5340-27-005-3369
Access Door Hinge

270053369
97K5A4028: RNCC: 2 | RNVC: 1

29 Jul 1997

5340-27-017-3684
Pad Eye

270173684
1009.1IS.0027: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-019-1973
Mounting Bracket

270191973
98000357: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-7098
Mending Plate

270497098
K04659055: RNCC: 3 | RNVC: 2

24 May 2010

5340-27-013-9066
Mending Plate

270139066
894110399101: RNCC: 2 | RNVC: 1

7 Aug 2002

5340-27-027-8252
Mending Plate

270278252
71A79-68329-AA: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-053-3671
Mounting Bracket

270533671
H341144801: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-013-5864
Escutcheon Plate

270135864
83BBA234K07AA: RNCC: 2 | RNVC: 1
91AB A234K07 ABW: RNCC: 2 | RNVC: 1

1 Jul 2002

5340-27-043-6802
Butt Hinge

270436802
SOL NO:12: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-001-2874
Loop Clamp

270012874
TM55-1520-210-2204-030-664-031: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-029-9096
Bridge Clamp

270299096
3XW-26282-01-00: RNCC: 2 | RNVC: 1

5 Jun 2006

5340-27-053-4844
Access Cover

270534844
H341204502: RNCC: 2 | RNVC: 1

11 May 2011

5340-27-019-6823
Bridge Clamp

270196823
20018-30064: RNCC: 2 | RNVC: 1
58901653: RNCC: 2 | RNVC: 1
W4631206: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-5794
Mounting Bracket

270385794
387002475401: RNCC: 2 | RNVC: 1

18 Oct 2007

5340-27-005-4924
Access Cover

270054924
G001-35-1: RNCC: 3 | RNVC: 2

16 Nov 1997

5340-27-017-6590
Mounting Bracket

270176590
H-39-5087-50: RNCC: 2 | RNVC: 1

14 Aug 2003

5340-27-057-9476
Mounting Bracket

270579476
02.215.1425: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-034-7843
Mending Plate

270347843
13167721: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-044-6845
Catch Strike

270446845
YC15P431B98AA: RNCC: 2 | RNVC: 1

3 Mar 2009

5340-27-053-0928
Mending Plate

270530928
103712: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-27-053-2116
Mounting Bracket

270532116
377775895001: RNCC: 2 | RNVC: 1

8 Apr 2011

5340-27-059-0764
Mounting Bracket

270590764
VOE20847155: RNCC: 3 | RNVC: 2
VOE20847155: RNCC: 3 | RNVC: 2

22 May 2013

5340-27-020-2264
Mounting Bracket

270202264
5122T: RNCC: 2 | RNVC: 1

18 Nov 2003

5340-27-004-5554
Access Cover

270045554
10091YK5027: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-023-0506
Mounting Bracket

270230506
2ABM 1MK 0011: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-012-1444
Mounting Bracket

270121444
10131 YK 0811: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-028-7891
Mounting Bracket

270287891
35001990: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-055-6766
Sliding Door Track

270556766
212-1105-93-103: RNCC: 2 | RNVC: 2

26 Dec 2011

5340-27-048-4493
Mounting Bracket

270484493
79A01-76020-AA: RNCC: 2 | RNVC: 1

9 Feb 2010

5340-27-021-2550
Mounting Bracket

270212550
512703: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-5575
Access Cover

270245575
8691277: RNCC: 2 | RNVC: 1
20065010: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-044-1220
Mounting Bracket

270441220
12E00-36924-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-026-1581
Mounting Bracket

270261581
1010FG-1804482: RNCC: 2 | RNVC: 1

9 Jun 2005

5340-27-018-7614
Access Cover

270187614
0513077-11-978: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-3151
Mending Plate

270183151
10121HS0032: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-0569
Mending Plate

270580569
203088: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-049-4854
Mending Plate

270494854
107865: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-021-7724
Mounting Bracket

270217724
1009 1YK 0267: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-043-5708
Mounting Bracket

270435708
5340-TJ-03320: RNCC: 2 | RNVC: 1

24 Nov 2008

5340-27-006-9193
Mounting Bracket

270069193
P91AG A62571 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-010-4732
Angle Bracket

270104732
6040-0119-4004: RNCC: 2 | RNVC: 1
6040-0119-4004: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-006-9168
Mounting Bracket

270069168
91AG 5N181 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-032-4709
Coat And Hat Hook

270324709
0000GK0245507: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-020-5572
Ball Socket Seat

270205572
23062: RNCC: 2 | RNVC: 1

12 Dec 2003

5340-27-054-2732
Mounting Bracket

270542732
98019156: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-057-3503
Mounting Bracket

270573503
ASEL-SITE-KLM-02: RNCC: 2 | RNVC: 1

23 Jul 2012

5340-27-008-1204
Angle Bracket

270081204
99005794: RNCC: 2 | RNVC: 1

18 Jul 2000

5340-27-058-7510
Mounting Bracket

270587510
VOE12745974: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-058-5097
Mending Plate

270585097
98022964: RNCC: 2 | RNVC: 1

14 Feb 2013

5340-27-017-9274
Mechanical Stop

270179274
901-LS-14: RNCC: 2 | RNVC: 1

10 Oct 2003

5340-27-053-9192
Bridge Clamp

270539192
DIN-3015-L-KP-7-R-76.1-PA: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-032-6891
Mounting Bracket

270326891
13D00-08135-AA: RNCC: 2 | RNVC: 1

8 Sep 2006

5340-27-050-8836
Access Cover

270508836
549377-02-04: RNCC: 3 | RNVC: 2
549377-02-04: RNCC: 3 | RNVC: 2

7 Sep 2010

5340-27-025-6852
Mending Plate

270256852
THN-40-00: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-059-3047
Access Cover

270593047
98019105-21: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-042-7123
Webbing Strap

270427123
KOLONKIRMIZI25MM: RNCC: 2 | RNVC: 1
KOLONKIRMIZI25MM: RNCC: 3 | RNVC: 2

8 Sep 2008

5340-27-060-0364
Mounting Bracket

270600364
MM-7490-0196: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-020-7511
Mounting Bracket

270207511
10131MS0223: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-7430
Mounting Bracket

270487430
030004-001-0: RNCC: 2 | RNVC: 1

25 Feb 2010

5340-27-042-6536
Mounting Bracket

270426536
72A97-60190-AA: RNCC: 2 | RNVC: 1

3 Sep 2008

5340-27-033-8936
Bow Handle

270338936
12E00-57014-AA: RNCC: 2 | RNVC: 1

28 Nov 2006

5340-27-042-5796
Access Cover

270425796
54550579: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-055-9119
Mounting Bracket

270559119
102187: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-048-7513
Angle Bracket

270487513
7291-07: RNCC: 2 | RNVC: 1
7291-07: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-021-5292
Hand Crank

270215292
TR-0119: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-9170
Synchro Clamp

270149170
13-410-07: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-6167
Handle Grip

270206167
9IML-0027: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-9809
Mounting Bracket

270139809
3522-1540-3000: RNCC: 2 | RNVC: 1
3522-1540-3000: RNCC: 2 | RNVC: 1

21 Aug 2002

5340-27-053-0114
Lock-Release Lever

270530114
901-IT-26-504: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-037-8111
Mounting Bracket

270378111
83A18-76214-AA: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-028-4609
Bridge Clamp

270284609
13097490: RNCC: 5 | RNVC: 9

3 Jan 2006

5340-27-048-7650
Mending Plate

270487650
9034-66: RNCC: 2 | RNVC: 1
9034-66: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-032-7718
Mounting Bracket

270327718
JTR-11.01.09: RNCC: 2 | RNVC: 1
JTR-11.01.09: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-028-7743
Mounting Bracket

270287743
884-5800-975: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-045-6949
Mounting Bracket

270456949
1.HIBM-1H-1248: RNCC: 2 | RNVC: 1

3 Jun 2009

5340-27-055-6767
Sliding Door Track

270556767
212-1105-93-104: RNCC: 2 | RNVC: 2

26 Dec 2011

5340-27-044-1990
Mending Plate

270441990
17500-43: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-054-2109
Utility Access Door

270542109
RC-135A: RNCC: 5 | RNVC: 9

9 Aug 2011

5340-27-049-8471
Mending Plate

270498471
103119: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-024-0975
Mending Plate

270240975
23226-21054: RNCC: 2 | RNVC: 1

16 Sep 2004

5340-27-058-4992
Access Cover

270584992
CH66806: RNCC: 3 | RNVC: 2
CH66806: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-27-041-0995
Handle Grip

270410995
1010FK-2701489: RNCC: 2 | RNVC: 1
24FK1-512500.04: RNCC: 2 | RNVC: 1

30 Apr 2008

5340-27-042-9029
Bow Handle

270429029
BAL-285: RNCC: 2 | RNVC: 1

17 Sep 2008

5340-27-005-9706
Loop Clamp

270059706
7K14656: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-046-4547
Mounting Bracket

270464547
1.HIBM-1Q-973: RNCC: 2 | RNVC: 1

12 Aug 2009

5340-27-053-4740
Mounting Bracket

270534740
H233140100: RNCC: 2 | RNVC: 1

10 May 2011

5340-27-059-3134
Mending Plate

270593134
98023676: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-035-0396
Mounting Bracket

270350396
901-TD-285: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-057-0596
Lock-Release Lever

270570596
901-AT-412-C6: RNCC: 2 | RNVC: 1

14 Jun 2012

5340-27-020-7886
Mounting Bracket

270207886
1009.1KI.0264-1*1-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-8455
Access Cover

270518455
2.HIBM-3D-1104: RNCC: 2 | RNVC: 1

1 Dec 2010

5340-27-022-6916
Catch Strike

270226916
20496T: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-009-6640
Mounting Bracket

270096640
1807 H4: RNCC: 2 | RNVC: 1

14 Aug 2001

5340-27-045-1701
Vent Plug

270451701
54BMK-P00010: RNCC: 2 | RNVC: 1

13 Apr 2009

5340-27-054-2315
Mounting Bracket

270542315
ME219004: RNCC: 2 | RNVC: 1
H349003707: RNCC: 2 | RNVC: 1

11 Aug 2011

5340-27-045-0487
Angle Bracket

270450487
10046179: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-048-3725
Mounting Bracket

270483725
5441565: RNCC: 2 | RNVC: 1

4 Feb 2010

5340-27-054-6871
Mounting Bracket

270546871
98021765: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-059-7659
Mounting Bracket

270597659
9999-0000-0354: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-052-5041
Mounting Bracket

270525041
1010FG-0100115: RNCC: 2 | RNVC: 1

28 Jan 2011

5340-27-048-2663
Butt Hinge Leaf

270482663
269.06.1: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-026-8909
Loop Clamp

270268909
1S419K155AB: RNCC: 2 | RNVC: 1
132E64: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-043-0227
Angle Bracket

270430227
40.780.2001: RNCC: 2 | RNVC: 1
40.780.2001: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-028-7777
Mounting Bracket

270287777
884-5800-992: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-048-9630
Mending Plate

270489630
103659: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-019-6431
Flush Catch Claw

270196431
05001DT0030: RNCC: 2 | RNVC: 1
3371: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-6284
Mending Plate

270276284
72A30-36081-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-047-0263
Mending Plate

270470263
73A04-57488-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-021-1938
Mending Plate

270211938
1010FG-0000320: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1858
Retaining Clip

270071858
E 866060 S: RNCC: 2 | RNVC: 1
E866064S101: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-022-7402
Access Cover

270227402
1010FG-0000576: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-056-8657
Mending Plate

270568657
203667: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-021-1039
Access Cover

270211039
1010FK-2810205: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-3888
Expansion Plug

270363888
8130035: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-056-1614
Handle Grip

270561614
KIN TUTAMAK LASTIGI: RNCC: 5 | RNVC: 9

24 Feb 2012

5340-27-049-9673
Mending Plate

270499673
HD110555: RNCC: 2 | RNVC: 2
HD110555: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-055-3414
Mounting Bracket

270553414
1692-0201: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-027-2562
Angle Bracket

270272562
15-01-114-002: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-038-2011
Angle Bracket

270382011
470-4-12-2: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-026-9227
Flush Lock

270269227
2540-ATF-0045: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-038-4784
Access Cover

270384784
40-270-1008: RNCC: 2 | RNVC: 1
40-270-1008: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-048-7584
Loop Clamp

270487584
NTC6847-LD: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-049-9085
Mounting Bracket

270499085
061230-000-0: RNCC: 2 | RNVC: 1

10 Jun 2010

5340-27-056-0877
Access Cover

270560877
5835-1305-4: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-27-050-2708
Butt Hinge

270502708
2.HIBM-10K-1398: RNCC: 2 | RNVC: 1

14 Jul 2010

5340-27-007-5085
Access Cover

270075085
3522-1140-8900: RNCC: 2 | RNVC: 1
3522-1140-8900: RNCC: 2 | RNVC: 1

3 Dec 1999

5340-27-032-7553
Mounting Bracket

270327553
13D05-08243-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-042-6737
Mounting Bracket

270426737
ESR3294-LD: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-021-2124
Mounting Bracket

270212124
1012.1HSCA.02-36: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-7873
Mounting Bracket

270577873
1010FMA-1202708: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-040-3517
Mounting Bracket

270403517
2ABEP00530: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-041-9095
Mounting Bracket

270419095
4-005-003: RNCC: 1 | RNVC: 2

30 Jun 2008

5340-27-058-1721
Mending Plate

270581721
YK0008: RNCC: 2 | RNVC: 1

18 Dec 2012

5340-27-022-2458
Mending Plate

270222458
19127MBT610: RNCC: 2 | RNVC: 1
19127MBT610: RNCC: 5 | RNVC: 9

19 Feb 2004

5340-27-059-7779
Mending Plate

270597779
83A63-76814-AA: RNCC: 2 | RNVC: 1

1 Nov 2013

5340-27-059-6350
Loop Clamp

270596350
901-KL-345: RNCC: 2 | RNVC: 1

20 Sep 2013

5340-27-034-6101
Mounting Bracket

270346101
329E45: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-009-8519
Angle Bracket

270098519
4193996: RNCC: 2 | RNVC: 1

19 Sep 2001

5340-27-016-4224
Mending Plate

270164224
81.61540.5020: RNCC: 2 | RNVC: 1

15 Jan 2003

5340-27-011-2437
Butt Hinge

270112437
07002YM0310: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-050-8272
Butt Hinge

270508272
13C44-57292-AA: RNCC: 2 | RNVC: 1

2 Sep 2010

5340-27-005-1714
Access Cover

270051714
1010001864: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-2918
Mending Plate

270542918
98018774: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-041-8692
Mending Plate

270418692
01013: RNCC: 2 | RNVC: 1
01013: RNCC: 2 | RNVC: 1

26 Jun 2008

5340-27-017-3639
Mending Plate

270173639
1009.1IS.0068-B/29: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-018-7498
Butt Hinge

270187498
09013DM0110: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-5811
Access Cover

270425811
S 910 B: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-041-8497
Block Clamp

270418497
2.HIBM-4L-511-15-15: RNCC: 2 | RNVC: 1

24 Jun 2008

5340-27-050-9113
Loop Clamp

270509113
90464-09M42: RNCC: 2 | RNVC: 2

15 Sep 2010

5340-27-017-7077
Access Cover

270177077
C040 0109-001 K4: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-028-7635
Mounting Bracket

270287635
884-5800-857: RNCC: 2 | RNVC: 1

3 Feb 2006

Load More Results