What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 6 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 6 of 53

5340-27-037-5440
Expansion Plug

270375440
16481-5K300: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-053-8271
Utility Access Door

270538271
C173-1D0001: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-057-5537
Mounting Bracket

270575537
M539F329400200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-032-5030
Mounting Bracket

270325030
T275-G1200-200: RNCC: 2 | RNVC: 1

26 Jul 2006

5340-27-048-7971
Loop Clamp

270487971
9035-81: RNCC: 2 | RNVC: 1
9035-81: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-027-9331
Access Cover

270279331
I2D103K-09: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-017-3810
Access Cover

270173810
1009.1IS.0058-12: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-2439
Mounting Bracket

270252439
MM-7550-0604: RNCC: 2 | RNVC: 1

8 Feb 2005

5340-27-057-7850
Butt Hinge Leaf

270577850
1010FMA-0000882-1: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-017-6934
Mending Plate

270176934
H-39-2459-01: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-053-8941
Flush Catch

270538941
109454: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-27-049-4783
Mending Plate

270494783
107285: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-056-8653
Mending Plate

270568653
12349785-2: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-007-1749
Retaining Clip

270071749
E 866287 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-034-5170
Sliding Door Track

270345170
58RS111967: RNCC: 2 | RNVC: 1

16 Jan 2007

5340-27-040-4136
Mounting Bracket

270404136
TD138152: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-007-1613
Retaining Clip

270071613
E 860385 S101: RNCC: 2 | RNVC: 1

10 Sep 1999

5340-27-028-7912
Bow Handle

270287912
40007877: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-038-2219
Mounting Bracket

270382219
3582644: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-054-5536
Mounting Bracket

270545536
98022424: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-050-3865
Mending Plate

270503865
105324: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-015-6740
Mounting Bracket

270156740
05001FT0020: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-7697
Sliding Door Track

270397697
893298412051: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-023-5401
Webbing Strap

270235401
8690507: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-045-7196
Loop Clamp

270457196
8A5300030: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-051-7259
Mending Plate

270517259
16F10-56742-AA: RNCC: 2 | RNVC: 1

23 Nov 2010

5340-27-041-4041
Utility Access Door

270414041
86X199 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-032-7924
Mending Plate

270327924
83A12-59652-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-056-5316
Access Cover

270565316
3835230: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-054-6782
Mounting Bracket

270546782
55RS752916: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-051-0351
Expansion Shield

270510351
M12X90: RNCC: 2 | RNVC: 1
M12X90: RNCC: 2 | RNVC: 1
M12X90: RNCC: 5 | RNVC: 9

27 Sep 2010

5340-27-047-8751
Mounting Bracket

270478751
13C25-58303-AA: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-27-038-5846
Mounting Bracket

270385846
387000924201: RNCC: 2 | RNVC: 1

19 Oct 2007

5340-27-013-3389
Bow Handle

270133389
88.62641.0003: RNCC: 2 | RNVC: 1

5 Jun 2002

5340-27-054-8561
Mounting Bracket

270548561
H346114000: RNCC: 2 | RNVC: 1

19 Oct 2011

5340-27-023-1577
Mounting Bracket

270231577
2ABMK 00246: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-004-5534
Loop Clamp

270045534
10091YK5054: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-015-1986
Caster Wheel

270151986
10121HT0173: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-041-4356
Mending Plate

270414356
42322: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-055-2917
Butt Hinge

270552917
DA0013539: RNCC: 2 | RNVC: 1

28 Nov 2011

5340-27-025-6917
Handle Grip

270256917
THN-110: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-048-7350
Loop Clamp

270487350
7291-12: RNCC: 2 | RNVC: 1
7291-12: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-001-8045
Loop Clamp

270018045
CESSNA-185-PART1441001-2: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-043-1224
Caster Wheel

270431224
0668-150X50X17 FRENLI: RNCC: 2 | RNVC: 1

14 Oct 2008

5340-27-012-6393
Elbow Catch

270126393
98012505: RNCC: 2 | RNVC: 1

20 Feb 2002

5340-27-048-9862
Mending Plate

270489862
105719: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-025-1545
Loop Clamp

270251545
MS21104D26: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-050-4176
Rigid Caster

270504176
09013TK007: RNCC: 2 | RNVC: 1

26 Jul 2010

5340-27-045-7421
Extension Handle

270457421
KVO.5836.26.009: RNCC: 3 | RNVC: 2

10 Jun 2009

5340-27-044-2120
Mounting Bracket

270442120
12E00-15071-AB: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-038-7233
Butt Hinge

270387233
0000GK0129771: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-038-1559
Mounting Bracket

270381559
11830-50K00: RNCC: 5 | RNVC: 9

18 Sep 2007

5340-27-022-6902
Mending Plate

270226902
40G5 10: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-018-3613
Mounting Bracket

270183613
10121YP5572: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-7909
Bow Handle

270287909
40007876: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-045-3423
Mounting Bracket

270453423
1010006635: RNCC: 2 | RNVC: 1

29 Apr 2009

5340-27-013-6526
Mortise Lock

270136526
011: RNCC: 2 | RNVC: 1
KALE: RNCC: 2 | RNVC: 1
6000: RNCC: 2 | RNVC: 1
GBE 19: RNCC: 2 | RNVC: 1
G.KALE-SILINDIRLI-: RNCC: 2 | RNVC: 1
SILINDIRLI GOMME: RNCC: 5 | RNVC: 2
KALE: RNCC: 5 | RNVC: 9

9 Jul 2002

5340-27-008-7011
Case Leg

270087011
KL-00012-0201: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-001-8043
Retaining Clip

270018043
CESSNA-185-PART1250106-1: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-017-3081
Butt Hinge

270173081
MENTESE,SARI,30MM: RNCC: 2 | RNVC: 1

12 Jun 2003

5340-27-054-6629
Mounting Bracket

270546629
55RS752831: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-036-0131
Angle Bracket

270360131
10028851: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-042-0335
Mounting Bracket

270420335
AYAK KONSOL: RNCC: 2 | RNVC: 1

11 Jul 2008

5340-27-008-2456
Angle Bracket

270082456
98005827: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-018-6795
Mechanical Stop

270186795
1010FK-2701317: RNCC: 2 | RNVC: 1
1010FK-2701317: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-3069
Mounting Bracket

270503069
301G94: RNCC: 2 | RNVC: 1

15 Jul 2010

5340-27-016-6362
Mounting Bracket

270166362
98013049: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-021-2141
Mounting Bracket

270212141
1012.1HSCA.03-50: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-5758
Handle Grip

270125758
22V0110700: RNCC: 2 | RNVC: 1

13 Feb 2002

5340-27-054-6036
Mounting Bracket

270546036
55RS752359: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-044-2807
Mounting Bracket

270442807
12B18-76286-AA: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-021-1153
Flush Catch Claw

270211153
0622527819: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3359
Mending Plate

270213359
1012.1HSCA.02-62: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-8262
Bow Handle

270368262
40.270.3050: RNCC: 2 | RNVC: 1
40.270.3050: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-014-4498
Elastic Strap

270144498
W700959 S300: RNCC: 2 | RNVC: 1

16 Oct 2002

5340-27-055-9958
Flush Catch

270559958
5095421: RNCC: 2 | RNVC: 2

24 Jan 2012

5340-27-059-3070
Mounting Bracket

270593070
98022892: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-053-9658
Mounting Bracket

270539658
55RS551820: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-018-7089
Mounting Bracket

270187089
1010FK-2702041: RNCC: 2 | RNVC: 1
1010FK-2702041: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0393
Loop Clamp

270150393
7392327: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6521
Butt Hinge

270156521
05001HM0055: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-4778
Mending Plate

270494778
105686: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-049-4883
Mending Plate

270494883
107858: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-047-8904
Mounting Bracket

270478904
16F00-71532-AA: RNCC: 2 | RNVC: 1

22 Dec 2009

5340-27-023-4498
Mounting Bracket

270234498
2ABMK 00434: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-038-7443
Mounting Bracket

270387443
10091YY0010: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-034-7409
Bridge Clamp

270347409
11000-16698-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-054-2030
Utility Access Door

270542030
RC130A: RNCC: 5 | RNVC: 9

8 Aug 2011

5340-27-021-1120
Mounting Bracket

270211120
05001DA0022: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-5808
Access Cover

270425808
54559802: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-049-5009
Mending Plate

270495009
108068: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-051-4119
Mending Plate

270514119
108027: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-051-1072
Mending Plate

270511072
103050: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-011-0544
Access Cover

270110544
7171238053: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-056-4804
Mending Plate

270564804
202166: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-045-5433
Rod End Clevis

270455433
377770973001: RNCC: 2 | RNVC: 1

14 May 2009

5340-27-051-2489
Mounting Bracket

270512489
16F00-58216-AA: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-016-8768
Bow Handle

270168768
716037631: RNCC: 2 | RNVC: 1

28 Mar 2003

5340-27-049-1654
Butt Hinge

270491654
KAPAK MENTESE,100X40MM: RNCC: 2 | RNVC: 1
KAPAK MENTESE,100X40MM: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-035-9673
Bridge Clamp

270359673
2166515: RNCC: 2 | RNVC: 1

13 Apr 2007

5340-27-019-8868
Mounting Bracket

270198868
1010FG-1800145: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1504
Loop Clamp

270051504
1010001730: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-9668
Mending Plate

270499668
HD110193: RNCC: 2 | RNVC: 2
HD110193: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-050-1549
Mending Plate

270501549
105927: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-050-0631
Mounting Bracket

270500631
102869: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-043-9378
Snap Hook

270439378
YAYLI KANCA,30MM: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-050-0727
Mending Plate

270500727
108266: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-018-3088
Mending Plate

270183088
10121YS5560: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1576
Loop Clamp

270051576
1010001905: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-017-5437
Mortise Lock

270175437
KILIT: RNCC: 2 | RNVC: 1

14 Jul 2003

5340-27-046-9387
Corner Brace

270469387
M828 005 001: RNCC: 2 | RNVC: 1

22 Oct 2009

5340-27-053-9028
Catch Strike

270539028
H346045101: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-058-3246
Loop Clamp

270583246
5744438: RNCC: 2 | RNVC: 1

9 Jan 2013

5340-27-041-3629
Utility Access Door

270413629
94X200 AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-043-8676
Mounting Bracket

270438676
12B19-55454-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-058-9324
Access Cover

270589324
VOE12744329: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-042-9763
Mechanical Stop

270429763
40.621.0117: RNCC: 2 | RNVC: 1
40.621.0117: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-017-3835
Lever Bracket

270173835
1009.1IS.0071-D6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-006-9177
Mounting Bracket

270069177
91AB 6A015 AD: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-007-3949
Retaining Clip

270073949
96AG 14197 CA: RNCC: 2 | RNVC: 1

2 Nov 1999

5340-27-017-8357
Bridge Clamp

270178357
190160001025: RNCC: 2 | RNVC: 1
190160001025: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-27-026-7213
Tee Hinge

270267213
11051YM0218: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-021-4079
Mounting Bracket

270214079
1009.1KI.0169-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-6770
Mounting Bracket

270346770
8200104: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-014-7450
Roller Holder

270147450
505082101: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-038-8587
Mounting Bracket

270388587
2ABEP00251: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-058-8584
Mending Plate

270588584
10082531: RNCC: 2 | RNVC: 1
10082531: RNCC: 5 | RNVC: 9

17 Apr 2013

5340-27-005-1681
Access Cover

270051681
1010002194: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-023-3430
Crank Handle

270233430
58RS103558: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-054-1759
Mending Plate

270541759
98020463: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-052-8045
Mending Plate

270528045
75 32 751 29R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-020-6305
Mounting Bracket

270206305
1009.1KI.0220-11*3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-9462
Mending Plate

270539462
109591: RNCC: 2 | RNVC: 2

11 Jul 2011

5340-27-018-6239
Mounting Bracket

270186239
1010FG-1401880: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1619
Synchro Clamp

270051619
1010000458: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-1629
Mounting Bracket

270591629
40.6010.200036: RNCC: 5 | RNVC: 9

10 Jun 2013

5340-27-059-4637
Loop Clamp

270594637
VOE12739145: RNCC: 3 | RNVC: 2
VOE12739145: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-27-021-4561
Mortise Lock Set

270214561
07002YK0300: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-8739
Mounting Bracket

270558739
H346115600: RNCC: 2 | RNVC: 2

11 Jan 2012

5340-27-019-9275
Masking Plate

270199275
08001PA0343H: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-052-6501
Utility Access Door

270526501
SEKSIYONEL KAPI 650X600CM: RNCC: 2 | RNVC: 1

14 Feb 2011

5340-27-034-4974
Mounting Bracket

270344974
FCTE21096AA: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-017-3631
Mending Plate

270173631
1009.1IS.0067-19: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-005-1758
Access Door Hinge

270051758
1010002508: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-009-6091
Mounting Bracket

270096091
715027614: RNCC: 2 | RNVC: 1

2 Aug 2001

5340-27-009-1986
Mounting Bracket

270091986
98000604: RNCC: 2 | RNVC: 1

23 May 2001

5340-27-023-0750
Lock Key

270230750
150130466: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-010-2455
Access Cover

270102455
98003484: RNCC: 2 | RNVC: 1

19 Nov 2001

5340-27-010-1952
Access Cover

270101952
98011041: RNCC: 2 | RNVC: 1

14 Nov 2001

5340-27-010-2882
Access Cover

270102882
10131YK0763: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-042-6118
Bridge Clamp

270426118
KELEPCE,RADYATOR: RNCC: 2 | RNVC: 1

1 Sep 2008

5340-27-018-8767
Handle Grip

270188767
11051YK0282: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-9477
Mechanical Stop

270099477
98010461: RNCC: 2 | RNVC: 1

16 Oct 2001

5340-27-058-8203
Mounting Bracket

270588203
10080857: RNCC: 2 | RNVC: 1
10080857: RNCC: 5 | RNVC: 9

9 Apr 2013

5340-27-026-0155
Mounting Bracket

270260155
5009363816: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-005-1639
Access Cover

270051639
1010002106: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-8455
Utility Access Door

270498455
94X190CM, PVC LAMBRI: RNCC: 2 | RNVC: 1

7 Jun 2010

5340-27-009-6078
Mounting Bracket

270096078
46522082: RNCC: 2 | RNVC: 1

2 Aug 2001

5340-27-025-8327
Access Cover

270258327
6838526: RNCC: 2 | RNVC: 1

18 Apr 2005

5340-27-048-7312
Mounting Bracket

270487312
5421484: RNCC: 2 | RNVC: 1

24 Feb 2010

5340-27-006-7311
Expansion Plug

270067311
K8C6089: RNCC: 2 | RNVC: 1

19 Apr 1999

5340-27-020-7879
Mounting Bracket

270207879
1009.1KI.0336-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1486
Loop Clamp

270051486
1010000542: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-003-9184
Flush Catch

270039184
07001MN0557: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-054-5532
Mounting Bracket

270545532
98021780: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-050-1576
Mending Plate

270501576
108064: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-054-0625
Mending Plate

270540625
98018446: RNCC: 2 | RNVC: 2

20 Jul 2011

5340-27-029-5551
Mounting Bracket

270295551
2ABMK02391: RNCC: 2 | RNVC: 1

11 Apr 2006

5340-27-040-8645
Mending Plate

270408645
ME511844: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-007-7784
Loop Clamp

270077784
10131YK0666: RNCC: 2 | RNVC: 1

17 Feb 2000

5340-27-022-4963
Flush Catch Claw

270224963
330868: RNCC: 2 | RNVC: 1

16 Mar 2004

5340-27-025-2793
Mounting Bracket

270252793
2510-ATF-0134: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-052-2879
Angle Bracket

270522879
KANAL BACASI: RNCC: 2 | RNVC: 2

3 Jan 2011

5340-27-049-4781
Mending Plate

270494781
107283: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-009-0068
Expansion Plug

270090068
2M53081: RNCC: 2 | RNVC: 1

28 Mar 2001

5340-27-045-7201
Loop Clamp

270457201
0780629140: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-042-5678
Mending Plate

270425678
54548854: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-049-9687
Mending Plate

270499687
HD121661: RNCC: 2 | RNVC: 2
HD121661: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-026-6092
Bow Handle

270266092
12A14-55022-BA: RNCC: 2 | RNVC: 1
DBR5841PMA: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-021-2134
Mounting Bracket

270212134
1012.1HSCA.02-44: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3078
Mending Plate

270213078
1012.1HSCA.02-67: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-1825
Catch Strike

270481825
377774688001: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-27-019-2610
Mounting Bracket

270192610
10131YK0112: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-2537
Mechanical Stop

270482537
269.30: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-050-5103
Bridge Clamp

270505103
DIN-3015-L-KP-2-G-12.7-PA: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-050-9947
Webbing Strap

270509947
07001MN0665 KAYIS: RNCC: 2 | RNVC: 1
PGSK BT002: RNCC: 2 | RNVC: 1

22 Sep 2010

5340-27-006-9253
Mounting Bracket

270069253
91AB 17B944 AB: RNCC: 2 | RNVC: 1

26 Jun 1999

5340-27-042-9911
Mounting Bracket

270429911
40.624.0147: RNCC: 2 | RNVC: 1
40.624.0147: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-059-4388
Butt Hinge

270594388
98019093: RNCC: 2 | RNVC: 1

5 Aug 2013

5340-27-013-7006
Mortise Lock

270137006
KOD 6030: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-054-3669
Mending Plate

270543669
98021969: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-036-9642
Catch Strike

270369642
C70H77: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-005-2885
Access Door Hinge

270052885
TI001-4: RNCC: 3 | RNVC: 2

8 May 1997

5340-27-015-8311
Mounting Bracket

270158311
014: RNCC: 2 | RNVC: 1
02TMO6OBO1001: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-023-0706
Roller Holder

270230706
655486C2: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-050-0711
Mending Plate

270500711
105737: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-034-5954
Retaining Clip

270345954
W702570S300: RNCC: 2 | RNVC: 1

25 Jan 2007

5340-27-046-7567
Mounting Bracket

270467567
898007979051: RNCC: 2 | RNVC: 1

6 Oct 2009

5340-27-046-8192
Mounting Bracket

270468192
897403991051: RNCC: 2 | RNVC: 1

12 Oct 2009

5340-27-028-2910
Loop Clamp

270282910
35200: RNCC: 2 | RNVC: 1

20 Dec 2005

5340-27-005-1492
Loop Clamp

270051492
1010000650: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-057-0173
Mounting Bracket

270570173
202789: RNCC: 2 | RNVC: 1

8 Jun 2012

5340-27-042-7364
Flush Catch Claw

270427364
1010006234: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-025-3583
Angle Bracket

270253583
209-060-159-8: RNCC: 2 | RNVC: 1

4 Mar 2005

5340-27-040-4509
Mounting Bracket

270404509
11608728: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-035-8550
Mounting Bracket

270358550
20405852: RNCC: 2 | RNVC: 1

3 Apr 2007

5340-27-029-4800
Handle Grip

270294800
58RS104586: RNCC: 2 | RNVC: 1

29 Mar 2006

5340-27-059-7377
Mounting Bracket

270597377
1010FMA-1805027: RNCC: 2 | RNVC: 1

11 Oct 2013

5340-27-018-6822
Mounting Bracket

270186822
1010FK-2710401: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-5767
Platen Holder

270055767
AE011008: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-27-015-0378
Loop Clamp

270150378
7385174: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-3133
Mounting Bracket

270533133
H341162100: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-042-3847
Bow Handle

270423847
654300: RNCC: 2 | RNVC: 1
654300: RNCC: 2 | RNVC: 1
654300: RNCC: 5 | RNVC: 9

12 Aug 2008

5340-27-056-7072
Mounting Bracket

270567072
ADOP-SHELTER-180-KTA: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-005-3077
Access Door Hinge

270053077
1.HIBM-1I-1620: RNCC: 3 | RNVC: 2

12 Feb 1997

5340-27-020-9788
Mending Plate

270209788
1010FG-1801063: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-3505
Expansion Plug

270243505
58RS103733: RNCC: 2 | RNVC: 1

14 Oct 2004

5340-27-008-7477
Mending Plate

270087477
98000469: RNCC: 2 | RNVC: 1

5 Jan 2001

5340-27-019-5687
Access Cover

270195687
07001YU0006: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-7932
Access Cover

270047932
10091YK5093: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-029-1540
Mounting Bracket

270291540
894131924151: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-040-3556
Mounting Bracket

270403556
2ABEP00536: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-005-1706
Access Cover

270051706
1010001398: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-024-3086
Mounting Bracket

270243086
1010FG-F1320030: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-024-8027
Loop Clamp

270248027
KEL 02: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-045-2533
Catch Strike

270452533
5715A009: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-27-054-7589
Mounting Bracket

270547589
C70G63: RNCC: 2 | RNVC: 1

12 Oct 2011

5340-27-018-6828
Mounting Bracket

270186828
1010FK-2710802: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1716
Access Cover

270051716
1010001928: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-7058
Mounting Bracket

270567058
ADOP-SHELTER-180-EMK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-058-9326
Access Cover

270589326
VOE12744328: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-013-0503
Mounting Bracket

270130503
6040-1132-8007: RNCC: 2 | RNVC: 1
6040-1132-8007: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-038-1028
Mounting Bracket

270381028
044-01-103: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-049-8476
Mending Plate

270498476
109160: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-051-3315
Bow Handle

270513315
897405285251: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-050-0709
Mending Plate

270500709
104650: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-023-6033
Access Cover

270236033
10121YM0231: RNCC: 2 | RNVC: 1

17 Jul 2004

5340-27-050-0699
Mending Plate

270500699
104446: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-1514
Expansion Plug

270221514
10121YT5596: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-026-1405
Mounting Bracket

270261405
1010FG-1804480: RNCC: 2 | RNVC: 1

8 Jun 2005

5340-27-013-6702
Mounting Bracket

270136702
SEN.09: RNCC: 2 | RNVC: 1
ASKI ELEMANI: RNCC: 2 | RNVC: 1

11 Jul 2002

5340-27-040-6585
Eye Hook

270406585
5340KK0026923: RNCC: 2 | RNVC: 1

20 Feb 2008

5340-27-038-2234
Mounting Bracket

270382234
3584382: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-037-6270
Mounting Bracket

270376270
MVS 38 NF 230 BA: RNCC: 2 | RNVC: 1

13 Aug 2007

5340-27-038-1487
Mounting Bracket

270381487
1010FK-2702134: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-047-4910
Mounting Bracket

270474910
13C25-08886-AA: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-27-055-2177
Mounting Bracket

270552177
1692-0052: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-055-6272
Mounting Bracket

270556272
H349003120: RNCC: 2 | RNVC: 1
ME013125: RNCC: 2 | RNVC: 1

19 Dec 2011

5340-27-009-1054
Mounting Bracket

270091054
98005189: RNCC: 2 | RNVC: 1

1 May 2001

5340-27-001-7368
Loop Clamp

270017368
TM55-1520-210-2204-011-199-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-023-1888
Mending Plate

270231888
2ABMK 00261: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-041-4334
Mending Plate

270414334
7173080: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-050-0568
Mending Plate

270500568
102830: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-0559
Mounting Bracket

270220559
10131YS1618: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-050-3888
Mending Plate

270503888
108483: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-020-6244
Loop Clamp

270206244
1010FG-0312931: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-6302
Mounting Bracket

270206302
1009.1KI.0220-11*7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-1172
Mounting Bracket

270561172
C21A91: RNCC: 2 | RNVC: 1

14 Feb 2012

5340-27-020-9513
Mending Plate

270209513
1010FG-0000356: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6551
Mounting Bracket

270186551
1010FG-1201763: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2863
Angle Bracket

270402863
Y533-71780-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-043-1350
Angle Bracket

270431350
Y532-72000-202: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-044-1235
Mounting Bracket

270441235
12E00-57178-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-017-3854
Mounting Bracket

270173854
1009.1IS.0029: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-8727
Mounting Bracket

270258727
1010FG-1802379-81: RNCC: 2 | RNVC: 1

22 Apr 2005

5340-27-054-6786
Mounting Bracket

270546786
55RS752821: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-018-3436
Mounting Bracket

270183436
820822-5: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-3954
Mounting Bracket

270233954
1934071101: RNCC: 2 | RNVC: 1
4.04.02.09: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-024-1323
Mending Plate

270241323
F-1560: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-058-1210
Mending Plate

270581210
19286-ZW1-B00: RNCC: 2 | RNVC: 1

12 Dec 2012

5340-27-049-7097
Mending Plate

270497097
K04659054: RNCC: 3 | RNVC: 2

24 May 2010

5340-27-052-3207
Mortise Lock

270523207
102883: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-27-001-2875
Loop Clamp

270012875
TM55-1520-210-2204-030-664-032: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-059-2667
Access Cover

270592667
2.04.01.00.031: RNCC: 5 | RNVC: 9

2 Jul 2013

5340-27-006-9059
Angle Bracket Set

270069059
A 435 492 51 41: RNCC: 2 | RNVC: 1

23 Jun 1999

5340-27-027-9360
Mounting Bracket

270279360
M52T3011R450176: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-054-7679
Handle Grip

270547679
C70AA88: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-27-054-6865
Mounting Bracket

270546865
98021180: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-046-1550
Padlock

270461550
ASMA KILIT 50X40 MM: RNCC: 2 | RNVC: 1

13 Jul 2009

5340-27-049-7343
Mounting Bracket

270497343
MP002338: RNCC: 2 | RNVC: 1

25 May 2010

5340-27-028-1151
Loop Clamp

270281151
35204: RNCC: 2 | RNVC: 1
35204: RNCC: 5 | RNVC: 9

2 Dec 2005

5340-27-053-9292
Mending Plate

270539292
98017438: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-058-2846
Access Cover

270582846
005179-000: RNCC: 2 | RNVC: 2

3 Jan 2013

5340-27-020-7854
Mounting Bracket

270207854
1009.1KI.0264-1*2-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-7947
Sliding Door Track

270357947
51742245: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-023-5123
Angle Bracket

270235123
1010FK-2810902: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-015-6777
Mounting Bracket

270156777
05001FT0031: RNCC: 2 | RNVC: 1
44506: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8046
Mounting Bracket

270158046
2106001751: RNCC: 2 | RNVC: 1

13 Dec 2002

5340-27-034-2370
Mounting Bracket

270342370
100023: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-036-2056
Mounting Bracket

270362056
4C465C374AA: RNCC: 2 | RNVC: 1

14 May 2007

5340-27-041-5021
Mending Plate

270415021
98414747: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-004-3213
Rod End Clevis

270043213
05001YC0037: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-045-9321
Loop Clamp

270459321
1613A62T: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-018-2644
Flush Catch Claw

270182644
3.03.02.07: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-056-8661
Mending Plate

270568661
98017241: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-005-3744
Fusible Plug

270053744
1012-1YT-5458: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-27-058-0474
Butt Hinge

270580474
1010FMA-1801294: RNCC: 2 | RNVC: 1

4 Dec 2012

5340-27-039-3852
Flush Catch

270393852
KILIT KAP: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-022-6465
Support Hook

270226465
KMS 0038: RNCC: 2 | RNVC: 1

3 Apr 2004

5340-27-060-0361
Mounting Bracket

270600361
MM-7490-0193: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-048-2872
Bow Handle

270482872
HD205327: RNCC: 3 | RNVC: 2

26 Jan 2010

5340-27-058-0341
Mounting Bracket

270580341
1010FMA-1801287: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-27-048-9658
Mending Plate

270489658
103698: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-025-0435
Mounting Bracket

270250435
10131YP0195: RNCC: 2 | RNVC: 1

28 Dec 2004

5340-27-032-3597
Mending Plate

270323597
83A18-58170-AA: RNCC: 2 | RNVC: 1

27 Jun 2006

5340-27-059-0038
Mending Plate

270590038
40.6010.200016: RNCC: 5 | RNVC: 9

14 May 2013

5340-27-043-0182
Angle Bracket

270430182
40.685.2116: RNCC: 2 | RNVC: 1
40.685.2116: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-047-0731
Mounting Bracket

270470731
13C00-36052-AB: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-044-7951
Mounting Bracket

270447951
1010006552: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-055-7276
Mending Plate

270557276
5083851: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-058-0667
Caster Wheel

270580667
09013ST0002: RNCC: 5 | RNVC: 9

6 Dec 2012

5340-27-027-6234
Key Holder

270276234
81.97118.0039: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-013-1118
Bridge Clamp

270131118
81.97401.0897: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-055-6377
Mending Plate

270556377
5089072: RNCC: 2 | RNVC: 2

20 Dec 2011

5340-27-040-6196
Mounting Bracket

270406196
897301528051: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-007-4202
Mounting Bracket

270074202
93AG A513A07 AB: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-056-4732
Mending Plate

270564732
202967: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-058-1503
Handle Ferrule

270581503
1010008102: RNCC: 2 | RNVC: 1

14 Dec 2012

5340-27-042-7215
Bail Handle

270427215
DOLAP KULPU,TEK DELIKLI: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-059-4582
Access Cover

270594582
VOE16001744: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-27-049-4737
Mending Plate

270494737
101906: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-048-9664
Mending Plate

270489664
103705: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-058-3841
Mending Plate

270583841
37545-00200: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-060-0375
Mounting Bracket

270600375
MM-7490-0590: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-019-1256
Loop Clamp

270191256
8Y7-77136-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-0931
Mounting Bracket

270230931
1010FK-0000365: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-021-2119
Mounting Bracket

270212119
1012.1HSCA.01-04: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-1846
Truss Fairlead

270271846
1333396: RNCC: 2 | RNVC: 1

14 Sep 2005

5340-27-059-0299
Loop Clamp

270590299
VOE652633: RNCC: 3 | RNVC: 2
VOE652633: RNCC: 3 | RNVC: 2

17 May 2013

5340-27-021-0883
Flush Catch Claw

270210883
1010FK-1911235: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4563
Rim Lock

270214563
07002YK0304: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-1428
Compression Cup

270241428
10308: RNCC: 2 | RNVC: 1
1480284030: RNCC: 2 | RNVC: 1

22 Sep 2004

5340-27-040-8644
Mending Plate

270408644
MK514165: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-059-4597
Loop Clamp

270594597
VOE968136: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-27-015-0489
Angle Bracket

270150489
1010FK-1811472: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-6992
Elbow Catch

270066992
5K55235: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-017-0308
Loop Clamp

270170308
7850170(7857.955): RNCC: 2 | RNVC: 1

2 May 2003

5340-27-043-7757
Utility Access Door

270437757
PIMAPEN 1200X2100MM: RNCC: 2 | RNVC: 1

15 Dec 2008

5340-27-044-4079
Synchro Clamp

270444079
81.26223-0006: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-058-5443
Clamping Catch

270585443
VOE78921: RNCC: 3 | RNVC: 2
VOE78921: RNCC: 3 | RNVC: 2

19 Feb 2013

5340-27-024-3324
Loop Clamp

270243324
00011172003: RNCC: 2 | RNVC: 1
0166653: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-035-0650
Mending Plate

270350650
83619025001: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-050-1980
Mounting Bracket

270501980
79C00-73802-AB: RNCC: 2 | RNVC: 1

6 Jul 2010

5340-27-015-0429
Loop Clamp

270150429
7768866: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-048-9894
Rod End Clevis

270489894
108562: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-051-7426
Mending Plate

270517426
1X56138368: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-024-2133
Butt Hinge

270242133
01123: RNCC: 2 | RNVC: 1
TAS MENTESE: RNCC: 2 | RNVC: 1

1 Oct 2004

5340-27-060-0367
Mounting Bracket

270600367
MN-7490-0037: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-027-2766
Mounting Bracket

270272766
20-01-565-503: RNCC: 2 | RNVC: 1

22 Sep 2005

5340-27-035-5895
Mending Plate

270355895
72B04-61421-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-020-9390
Mounting Bracket

270209390
1009.1KI.0264-1*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-3509
Retaining Clip

270073509
W 702893 S300: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-013-9664
Mounting Bracket

270139664
6040-0522-8014: RNCC: 2 | RNVC: 1
1BWB98401986-1: RNCC: 2 | RNVC: 1
6040-0522-8014: RNCC: 2 | RNVC: 1

19 Aug 2002

5340-27-054-6864
Mounting Bracket

270546864
98021127: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-057-9049
Webbing Strap

270579049
07002YS0101: RNCC: 5 | RNVC: 9

15 Nov 2012

5340-27-047-9768
Bow Handle

270479768
8M208599: RNCC: 2 | RNVC: 1

25 Dec 2009

5340-27-022-3299
Expansion Plug

270223299
10121YT0221: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-050-3896
Mending Plate

270503896
108959: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-054-1752
Mending Plate

270541752
98020629: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-047-9137
Mending Plate

270479137
13C02-66039-AA: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-017-6383
Mounting Bracket

270176383
388882784101: RNCC: 2 | RNVC: 1

12 Aug 2003

5340-27-045-4456
Bridge Clamp

270454456
83A11-75075-AA: RNCC: 2 | RNVC: 1

8 May 2009

5340-27-005-1754
Loop Clamp

270051754
1010002439: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-033-6296
Mounting Bracket

270336296
40-205-3030: RNCC: 2 | RNVC: 1
40-205-3030: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-055-3386
Mounting Bracket

270553386
1692-0036: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-044-5892
Mending Plate

270445892
502-21-CN-0111: RNCC: 2 | RNVC: 2

19 Feb 2009

5340-27-023-5134
Mounting Bracket

270235134
1010FK-2710402-1: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-055-2097
Rod End Clevis

270552097
41300300300: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-27-054-6667
Mounting Bracket

270546667
55RS753009: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-023-5267
Coat And Hat Hook

270235267
20333T: RNCC: 2 | RNVC: 1

9 Jul 2004

5340-27-028-3465
Butt Hinge

270283465
5X7 CM, KROM: RNCC: 2 | RNVC: 1

25 Dec 2005

5340-27-003-8199
Access Cover

270038199
6003-0516-4007: RNCC: 2 | RNVC: 1
6003-0516-4007: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-021-1923
Mending Plate

270211923
1010FG-0000498: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-7345
Mounting Bracket

270597345
1010FMA-0005071: RNCC: 2 | RNVC: 1

10 Oct 2013

5340-27-052-2117
Mounting Bracket

270522117
303331: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-040-6009
Angle Bracket

270406009
Y533-72011-200: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-015-0448
Access Cover

270150448
10887991: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-5706
Mending Plate

270425706
54558606: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-050-8490
Access Cover

270508490
63D-42610-10-4D: RNCC: 3 | RNVC: 2
63D-42610-10-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-056-1146
Mounting Bracket

270561146
C21A94: RNCC: 2 | RNVC: 1

14 Feb 2012

5340-27-006-9540
Mounting Bracket

270069540
95AT A26697 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-051-1088
Mending Plate

270511088
107052: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-006-9493
Mounting Bracket

270069493
93AB A25049 AB: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-004-8240
Case Leg

270048240
10131YB0577: RNCC: 3 | RNVC: 2

12 Nov 1996

5340-27-044-4066
Synchro Clamp

270444066
06.43839-0078: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-022-1775
Handle Grip

270221775
13UT1-221200.04: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-053-9937
Mending Plate

270539937
98017715: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-024-0837
Mechanical Stop

270240837
23356: RNCC: 2 | RNVC: 1
7144139: RNCC: 2 | RNVC: 1

15 Sep 2004

5340-27-018-7819
Mending Plate

270187819
209-060-772-101: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-6986
Elbow Catch

270066986
2K12891: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-022-2457
Mending Plate

270222457
19126MBT610: RNCC: 2 | RNVC: 1
19126MBT610: RNCC: 5 | RNVC: 9

19 Feb 2004

5340-27-019-1213
Access Cover

270191213
7380097: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9149
Mounting Bracket

270069149
91AG 3K173 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-057-9836
Mounting Bracket

270579836
1010FMA-1401857: RNCC: 2 | RNVC: 1

26 Nov 2012

5340-27-022-4480
Truss Fairlead

270224480
18HML37 S01 114: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-019-6419
Bail Handle

270196419
05005YH0206: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-8049
Retaining Strap

270068049
2K61677: RNCC: 2 | RNVC: 1
1568 58: RNCC: 2 | RNVC: 1

11 May 1999

5340-27-007-1334
Mounting Bracket

270071334
95VB V28176 BE: RNCC: 2 | RNVC: 1

27 Aug 1999

5340-27-005-1560
Retaining Clip

270051560
1010000361: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-4162
Bow Handle

270484162
300598: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-015-0471
Access Cover

270150471
1010FK-1811366: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-028-4894
Bridge Clamp

270284894
20 MM: RNCC: 2 | RNVC: 1
12228: RNCC: 5 | RNVC: 9

4 Jan 2006

5340-27-041-3656
Utility Access Door

270413656
94X2002 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-048-5786
Mending Plate

270485786
HD341231SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-022-2688
Expansion Plug

270222688
10121YT0317: RNCC: 2 | RNVC: 1

23 Feb 2004

5340-27-054-2730
Mounting Bracket

270542730
98019155: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-025-2328
Angle Bracket

270252328
35D697: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-008-1686
Handle Grip

270081686
27722: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-008-8797
Rod End Clevis

270088797
8749: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-048-0370
Mounting Bracket

270480370
S-012: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-052-0322
Bow Handle

270520322
3C46E045B16AB: RNCC: 2 | RNVC: 1

15 Dec 2010

5340-27-059-2503
Access Cover

270592503
KIBI 03/400097135: RNCC: 2 | RNVC: 1

27 Jun 2013

5340-27-036-1431
Mounting Bracket

270361431
2ABEP00155: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-042-5662
Mending Plate

270425662
54546585: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-029-5874
Mending Plate

270295874
10003967: RNCC: 2 | RNVC: 1

17 Apr 2006

5340-27-059-2745
Mounting Bracket

270592745
55RS753136: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-059-0957
Bumper

270590957
814/00370: RNCC: 2 | RNVC: 1

24 May 2013

5340-27-013-3290
Loop Clamp

270133290
90464-35132-00: RNCC: 2 | RNVC: 1
11721T: RNCC: 2 | RNVC: 1
YC1H 19E754 EB: RNCC: 2 | RNVC: 1

4 Jun 2002

5340-27-038-4772
Loop Clamp

270384772
T30565-700: RNCC: 2 | RNVC: 1
T30565-700: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-017-1498
Metal Grille

270171498
ASM1-13: RNCC: 2 | RNVC: 1

21 May 2003

5340-27-025-3446
Loop Clamp

270253446
4503686: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-018-9051
Mounting Bracket

270189051
WSRS63009EDF: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-2016
Mounting Bracket

270192016
11001MP0124: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-0269
Mounting Bracket

270540269
55RS351103: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-015-9871
Mounting Bracket

270159871
7702 543 148: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-055-5270
Mending Plate

270555270
202346: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-042-5788
Access Cover

270425788
54545280: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-007-1830
Access Cover

270071830
E 852087 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-058-9984
Mending Plate

270589984
04264827: RNCC: 2 | RNVC: 1

14 May 2013

5340-27-034-0897
Expansion Plug

270340897
57RS304093: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-058-2252
Mounting Bracket

270582252
200942: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-044-1879
Swivel Caster

270441879
2036-130: RNCC: 2 | RNVC: 1

14 Jan 2009

5340-27-059-6524
Loop Clamp

270596524
901-KL-354: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-048-7298
Mounting Bracket

270487298
5420949: RNCC: 2 | RNVC: 1

24 Feb 2010

5340-27-045-3913
Mending Plate

270453913
MR131872: RNCC: 3 | RNVC: 2

6 May 2009

5340-27-050-3863
Mending Plate

270503863
105283: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-026-0109
Bail Handle

270260109
16001DK0020: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-015-0383
Loop Clamp

270150383
7389084: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-019-2991
Webbing Strap

270192991
10131HK0063: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3726
Eye Hook

270173726
1009.1IS.0071-F: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-056-4629
Mending Plate

270564629
107305: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-040-2765
Bow Handle

270402765
8200384109: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-014-0328
Loop Clamp

270140328
2T14 9K155 AC: RNCC: 2 | RNVC: 1
25113T: RNCC: 2 | RNVC: 1

29 Aug 2002

5340-27-010-1330
Loop Clamp

270101330
DZJK000009: RNCC: 2 | RNVC: 1

7 Nov 2001

5340-27-010-2956
Mounting Bracket

270102956
10131YB0715: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-027-2565
Angle Bracket

270272565
15-01-267-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-035-8732
Expansion Plug

270358732
85007956: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-022-1080
Expansion Plug

270221080
10121YT5571: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-025-7714
Mounting Bracket

270257714
10131YS1650: RNCC: 2 | RNVC: 1

7 Apr 2005

5340-27-008-9294
Access Door Hinge

270089294
98001446: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-016-9321
Loop Clamp

270169321
51.97440.0138: RNCC: 2 | RNVC: 1
21611T: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-055-0304
Mounting Bracket

270550304
6111.5200-5: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-042-6155
Handle Grip

270426155
703196095023: RNCC: 5 | RNVC: 9

1 Sep 2008

5340-27-052-8047
Mending Plate

270528047
80 11 962 82R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-049-7065
Mounting Bracket

270497065
MP002701: RNCC: 2 | RNVC: 1

21 May 2010

5340-27-042-5797
Access Cover

270425797
54550868: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-044-6185
Mounting Bracket

270446185
Y534-73023-000: RNCC: 2 | RNVC: 1

23 Feb 2009

5340-27-018-6253
Loop Clamp

270186253
1010FG-0100961: RNCC: 2 | RNVC: 1
HSN06-009: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-8911
Flush Catch Claw

270198911
1010FG-1802394: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-2759
Mounting Bracket

270182759
3.08.01.06: RNCC: 2 | RNVC: 1

13 Nov 2003

5340-27-014-2524
Loop Clamp

270142524
2K206816: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-054-9458
Latch Bar

270549458
1492-49.4216099: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-058-0974
Mounting Bracket

270580974
1010FMA-1801351: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-012-1315
Webbing Strap

270121315
05001HK0113: RNCC: 2 | RNVC: 1

15 Jan 2002

5340-27-005-1750
Loop Clamp

270051750
1010002580: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-009-0864
Mounting Bracket

270090864
98001225-3: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-006-9492
Mounting Bracket

270069492
93AB A25048 AB: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-042-0836
Bow Handle

270420836
44913: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-026-1329
Mounting Bracket

270261329
1010FG-1804476: RNCC: 2 | RNVC: 1

8 Jun 2005

5340-27-026-7443
Bow Handle

270267443
MR240720: RNCC: 2 | RNVC: 1

26 Jul 2005

5340-27-012-8676
Angle Bracket

270128676
98012758: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-035-7018
Catch Strike

270357018
51724678: RNCC: 2 | RNVC: 1

26 Mar 2007

5340-27-027-6285
Mending Plate

270276285
72A30-36080-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-050-1978
Mounting Bracket

270501978
79C00-73500-AA: RNCC: 2 | RNVC: 1

6 Jul 2010

5340-27-025-4932
Rod End Clevis

270254932
1010FG-1805253: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-052-5465
Bridge Clamp

270525465
700325022119: RNCC: 2 | RNVC: 1

7 Feb 2011

5340-27-050-7246
Mending Plate

270507246
79C00-73008-AA: RNCC: 2 | RNVC: 1

23 Aug 2010

5340-27-006-9148
Mounting Bracket

270069148
91AG 3K172 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-038-7210
Mounting Bracket

270387210
10091YP0976: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-057-6330
Mounting Bracket

270576330
ALTFC01346: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-032-6866
Mounting Bracket

270326866
13C00-15071-AB: RNCC: 2 | RNVC: 1

8 Sep 2006

5340-27-042-5838
Mortise Lock Set

270425838
KILIT,DOLAP: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-054-6868
Mounting Bracket

270546868
98021567: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-004-5121
Access Cover

270045121
10121YK5276: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-034-1070
Mounting Bracket

270341070
2ABEP00053: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-057-4005
Mending Plate

270574005
0201716002: RNCC: 2 | RNVC: 1

31 Jul 2012

5340-27-013-7334
Catch Strike

270137334
9164 28: RNCC: 2 | RNVC: 1

17 Jul 2002

5340-27-059-6488
Loop Clamp

270596488
901-KL-333: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-008-6120
Strap Hinge Leaf

270086120
98001445: RNCC: 2 | RNVC: 1

29 Nov 2000

5340-27-056-3756
Access Cover

270563756
3835019: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-27-050-3891
Mending Plate

270503891
108486: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-051-4096
Mending Plate

270514096
105799: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-025-9324
Plain Solid Disk

270259324
R79856328: RNCC: 2 | RNVC: 1

5 May 2005

5340-27-003-8200
Access Cover

270038200
6040-0516-4012: RNCC: 2 | RNVC: 1
6040-0516-4012: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-001-2715
Mounting Plate

270012715
102480005: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-046-4642
Mortise Lock

270464642
151R-35: RNCC: 2 | RNVC: 1
151R-35: RNCC: 2 | RNVC: 1

13 Aug 2009

5340-27-040-2546
Mending Plate

270402546
8200067316: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-053-9229
Mending Plate

270539229
101886: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-052-8035
Mending Plate

270528035
99 2A 100 22R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-020-7611
Mounting Bracket

270207611
8351533840: RNCC: 2 | RNVC: 1

15 Dec 2003

Load More Results