What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 50 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 50 of 53

5340-27-037-9931
M Baglanti Elemani

270379931
BAGLANTI,T: RNCC: 2 | RNVC: 1

7 Sep 2007

5340-27-015-6894
Mounting Plate

270156894
10091KI0045: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-022-8418
Tasima Kol

270228418
387278: RNCC: 2 | RNVC: 1

27 Apr 2004

5340-27-055-6856
Yatak

270556856
T950757: RNCC: 3 | RNVC: 1

27 Dec 2011

5340-27-038-2830
Buckle

270382830
87816-1G000: RNCC: 5 | RNVC: 9

26 Sep 2007

5340-27-051-1492
Kovan

270511492
1010007111: RNCC: 2 | RNVC: 1

6 Oct 2010

5340-27-035-6535
Dust And Moisture Seal Protective Cover

270356535
897363823051: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-044-2405
Retaining Strap

270442405
85.41615-0002: RNCC: 2 | RNVC: 1

19 Jan 2009

5340-27-028-4327
Dust And Moisture Seal Protective Cover

270284327
71A00-68200-BA: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-022-0675
Assembled Nut Retainer

270220675
07002YS0370: RNCC: 2 | RNVC: 1

30 Jan 2004

5340-27-040-4322
Kapak

270404322
7633038: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-048-8586
Tasima Kol

270488586
901-HT-28-22: RNCC: 2 | RNVC: 1

11 Mar 2010

5340-27-017-3785
Headless Straight Rod

270173785
1009.1IS.0087-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-052-2133
Destek

270522133
1010FK-1301001-1: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-052-2137
Baglanti Parcasi

270522137
1010FK-1301001-4: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-026-3578
Access Hole Frame

270263578
1010FK-1802006: RNCC: 2 | RNVC: 1

1 Jul 2005

5340-27-057-7571
Assembled Nut Retainer

270577571
AR535T311120000: RNCC: 2 | RNVC: 1

12 Oct 2012

5340-27-035-5981
Engine Accessory Bracket

270355981
20562394: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-059-7197
Dust And Moisture Seal Protective Plug

270597197
1500.04.0003: RNCC: 2 | RNVC: 1

8 Oct 2013

5340-27-004-6062
Spring Loaded Cylinder Fastener

270046062
10131YMD0110: RNCC: 2 | RNVC: 1

15 May 1996

5340-27-059-9097
Takma-Sokme Aparat

270599097
40-24T: RNCC: 5 | RNVC: 9

6 Dec 2013

5340-27-035-5441
Dust And Moisture Seal Protective Cover

270355441
24425461: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-022-5391
Retaining Clip

270225391
22255T: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-040-4792
Mounting Plate

270404792
12257785: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-019-1402
Buckle

270191402
8335TOKA9880012: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-2622
Manual Control Handle

270212622
HJ2010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-5219
Retaining Clip

270355219
7721583: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-004-7910
Loop Clamp

270047910
10091YK5078: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-017-5230
Mounting Plate

270175230
3345-00052: RNCC: 2 | RNVC: 1

7 Jul 2003

5340-27-023-0393
Dust And Moisture Seal Protective Cover

270230393
24141-1020: RNCC: 2 | RNVC: 1

14 May 2004

5340-27-055-1471
Retaining Clip

270551471
100571: RNCC: 2 | RNVC: 2

16 Nov 2011

5340-27-012-5591
Dust And Moisture Seal Protective Cover

270125591
15106057: RNCC: 2 | RNVC: 1
151060274: RNCC: 3 | RNVC: 1
15400601027: RNCC: 3 | RNVC: 1
15400601027: RNCC: 3 | RNVC: 1

12 Feb 2002

5340-27-049-1783
Buckle

270491783
8200703359: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-27-043-6634
Adaptor Plaka

270436634
321-30-0001-01: RNCC: 2 | RNVC: 1

1 Dec 2008

5340-27-001-7451
Mounting Bracket

270017451
TM55-1520-210-2205-040-123-3: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-6195
Izgara

270506195
180600-000-0: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-053-8143
Utility Resilient Mount

270538143
A489-080350: RNCC: 2 | RNVC: 2

23 Jun 2011

5340-27-005-7658
Multiple Angle Bracket

270057658
10131YB0595: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-040-7929
Retaining Clip

270407929
MK487814: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-023-6374
Retaining Clip

270236374
E866047S: RNCC: 2 | RNVC: 1

22 Jul 2004

5340-27-039-3025
Mounting Plate

270393025
1220X2440X9MM OSB: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-027-5805
Headless Straight Rod

270275805
48820-32010: RNCC: 2 | RNVC: 1

12 Oct 2005

5340-27-014-2521
Dust And Moisture Seal Protective Cover

270142521
OC 110 TGTK 00010: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-007-9411
Dust And Moisture Seal Protective Cap

270079411
53RS200036: RNCC: 2 | RNVC: 1

27 Apr 2000

5340-27-046-2958
Retaining Bail

270462958
DEKORATIF KULP: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-008-3702
Retaining Clip

270083702
4990607: RNCC: 2 | RNVC: 1

27 Sep 2000

5340-27-060-0076
Sabitleme Pim

270600076
901-PM-301: RNCC: 2 | RNVC: 1

24 Dec 2013

5340-27-013-1794
Mounting Plate

270131794
H-39-0539-01: RNCC: 2 | RNVC: 1
H-39-0539-01: RNCC: 2 | RNVC: 1

10 May 2002

5340-27-049-5975
Destek Plakasi

270495975
818-000-04: RNCC: 2 | RNVC: 1

12 May 2010

5340-27-058-5340
Mounting Plate

270585340
920-8021/03: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-039-5238
Retaining Clamp Assembly

270395238
7335790296: RNCC: 2 | RNVC: 1

6 Dec 2007

5340-27-047-1422
Dust And Moisture Seal Protective Cover

270471422
71A00-72020-AA: RNCC: 1 | RNVC: 2

9 Nov 2009

5340-27-052-5234
Retaining Clip

270525234
74 99 921 13R: RNCC: 2 | RNVC: 1

3 Feb 2011

5340-27-050-0404
Dust And Moisture Seal Protective Cover

270500404
73A04-61844-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-017-3944
Mounting Plate

270173944
10091IS0039: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-038-8370
Retaining Clip

270388370
7700430573: RNCC: 2 | RNVC: 1

1 Nov 2007

5340-27-032-8186
Retaining Clip

270328186
14578882: RNCC: 2 | RNVC: 1

20 Sep 2006

5340-27-015-6935
Mounting Plate

270156935
10091KI0142: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6982
Mounting Plate

270156982
10091YA0055: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-9566
Plaka

270499566
10046533: RNCC: 2 | RNVC: 1

15 Jun 2010

5340-27-023-2532
Utility Resilient Mount

270232532
23054T: RNCC: 2 | RNVC: 1

11 Jun 2004

5340-27-026-1609
Dust And Moisture Seal Protective Cover

270261609
2011.2566.016: RNCC: 2 | RNVC: 1

10 Jun 2005

5340-27-016-7447
Retaining Clip

270167447
7660238: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-055-6316
Utility Resilient Mount

270556316
ASV-W3008-40: RNCC: 2 | RNVC: 2

20 Dec 2011

5340-27-026-3428
Retaining Clip

270263428
MA155254: RNCC: 2 | RNVC: 1

30 Jun 2005

5340-27-038-7657
Retaining Strap

270387657
8200157362: RNCC: 2 | RNVC: 1

31 Oct 2007

5340-27-018-6620
Dust And Moisture Seal Protective Cap

270186620
1010FK-1911458: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-6234
Resilient Mount Adapter

270386234
10024263: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-017-7028
Utility Resilient Mount

270177028
388886515001: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-036-8737
Engine Accessory Bracket

270368737
965557: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-039-6645
Dust And Moisture Seal Protective Cover

270396645
897181326051: RNCC: 2 | RNVC: 1

12 Dec 2007

5340-27-053-1558
Dust And Moisture Seal Protective Cover

270531558
898079030051: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-059-7340
Mounting Plate

270597340
1010FMA-0000655: RNCC: 2 | RNVC: 1

10 Oct 2013

5340-27-021-4440
Mounting Plate

270214440
1009.1KI.0077-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-1803
Utility Resilient Mount

270511803
103992: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-016-7273
Retaining Clip

270167273
46443178: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-018-6857
Mounting Plate

270186857
1010FK-2701458: RNCC: 2 | RNVC: 1
1010FK-2701458: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-016-7482
Retaining Clip

270167482
46836020: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-005-9508
Clamp Bolt Assembly

270059508
2K11289: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-015-1995
Utility Resilient Mount

270151995
10121HT0221: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-026-3940
Retaining Clip

270263940
MB973603: RNCC: 2 | RNVC: 1

6 Jul 2005

5340-27-041-8398
Utility Resilient Mount

270418398
06003: RNCC: 2 | RNVC: 1
06003: RNCC: 2 | RNVC: 1

23 Jun 2008

5340-27-005-1668
Mounting Bracket

270051668
1010002201: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-2171
Utility Resilient Mount

270482171
54RS850624: RNCC: 2 | RNVC: 1

20 Jan 2010

5340-27-026-8371
Tutucu Somun

270268371
05001FS0205: RNCC: 2 | RNVC: 1

4 Aug 2005

5340-27-043-7460
Extension Drawer Slide Section

270437460
2ABEP01013: RNCC: 2 | RNVC: 1

5 Dec 2008

5340-27-053-4426
Protection Bellows

270534426
327601012E: RNCC: 2 | RNVC: 1

5 May 2011

5340-27-021-4656
Retaining Clamp Assembly

270214656
41351-IML: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-2589
Mounting Plate

270212589
1009.1KI.0330: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-2972
Spring Tension Clip

270182972
98013893: RNCC: 2 | RNVC: 1

14 Nov 2003

5340-27-056-6368
Utility Resilient Mount

270566368
ASVC5000: RNCC: 2 | RNVC: 1
DM010500: RNCC: 2 | RNVC: 1

19 Apr 2012

5340-27-011-8203
Dust And Moisture Seal Protective Cap

270118203
5340KIM0014: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-044-5206
Dagitici Parca

270445206
53RS803096: RNCC: 2 | RNVC: 1

12 Feb 2009

5340-27-037-8185
Spring Tension Clip

270378185
24228-89974: RNCC: 5 | RNVC: 9

28 Aug 2007

5340-27-017-3117
Mounting Plate

270173117
H-39-3996-50: RNCC: 2 | RNVC: 1

12 Jun 2003

5340-27-058-1265
Utility Resilient Mount

270581265
599124A010: RNCC: 2 | RNVC: 2
599124A010: RNCC: 2 | RNVC: 2

12 Dec 2012

5340-27-003-9208
Spring Tension Clip

270039208
07001MN0719: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-052-8933
Mesnet

270528933
1010FK-1301008-3: RNCC: 2 | RNVC: 1

4 Mar 2011

5340-27-023-2329
Dust And Moisture Seal Protective Plug

270232329
26052T: RNCC: 2 | RNVC: 1

9 Jun 2004

5340-27-042-7490
Kaucuk Tampon

270427490
568858-L: RNCC: 2 | RNVC: 1
568858-L: RNCC: 5 | RNVC: 9

10 Sep 2008

5340-27-015-0499
Mounting Plate

270150499
1010FK-1811558: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-008-2336
Manual Control Handle

270082336
25660: RNCC: 2 | RNVC: 1

22 Aug 2000

5340-27-032-9252
Dust And Moisture Seal Protective Cover

270329252
7335792769: RNCC: 5 | RNVC: 9

29 Sep 2006

5340-27-049-5473
Monta Plaka Takimi

270495473
10013175: RNCC: 2 | RNVC: 1

7 May 2010

5340-27-014-2614
Helical Compression Spring Seat

270142614
947162033051: RNCC: 2 | RNVC: 1

20 Oct 2003

5340-27-009-7273
Dust And Moisture Seal Protective Plug

270097273
7518 94: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-032-6829
Dust And Moisture Seal Protective Cover

270326829
13D00-56282-AA: RNCC: 2 | RNVC: 1

7 Sep 2006

5340-27-059-2537
Tasiyici

270592537
KA 02/400097112: RNCC: 2 | RNVC: 1

28 Jun 2013

5340-27-007-4730
Mounting Bracket

270074730
91AG F46687 AC: RNCC: 2 | RNVC: 1

29 Nov 1999

5340-27-016-7167
Retaining Clip

270167167
40 KLIPS: RNCC: 2 | RNVC: 1
40 MM PPRC: RNCC: 2 | RNVC: 1
PPRC KELEPCE 40: RNCC: 2 | RNVC: 1
40 KLIPS: RNCC: 2 | RNVC: 1
PPRC KELEPCE 40: RNCC: 2 | RNVC: 1

4 Mar 2003

5340-27-006-0862
Blank Panel

270060862
AAW8013: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-005-9765
Retaining Clip

270059765
5K57938: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-006-9361
Dust And Moisture Seal Protective Cap

270069361
4K60122: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-024-6231
Kose Profil

270246231
18 MM: RNCC: 2 | RNVC: 1

23 Nov 2004

5340-27-058-6091
Kilit

270586091
MESAN 010-1-F-DD-001: RNCC: 5 | RNVC: 9

26 Feb 2013

5340-27-057-8465
Takma-Sokme Aparat

270578465
CV72355-AT61123: RNCC: 2 | RNVC: 1

7 Nov 2012

5340-27-001-7540
Angle Bracket

270017540
TM55-1520-210-2205-031-481-009: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-018-6874
Double Angle Bracket

270186874
1010FG-1804472: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-1263
Headless Straight Rod

270281263
7701047416: RNCC: 2 | RNVC: 1

5 Dec 2005

5340-27-034-9158
Dust And Moisture Seal Protective Cover

270349158
13D05-36596-AA: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-012-0330
Retaining Clip

270120330
E866110 S: RNCC: 2 | RNVC: 1

4 Jan 2002

5340-27-038-9829
Helical Compression Spring Seat

270389829
901-YT-78: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-040-2825
Mounting Plate

270402825
Y530-80006-204: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-024-2421
Retaining Clip

270242421
31360-25800: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-049-1707
Retaining Clip

270491707
8200448941: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-27-023-5718
Dust And Moisture Seal Protective Cover

270235718
26070T: RNCC: 2 | RNVC: 1

14 Jul 2004

5340-27-028-4443
Retaining Strap

270284443
72A08-61641-AA: RNCC: 2 | RNVC: 1

2 Jan 2006

5340-27-027-6654
Double Angle Bracket

270276654
1010FG-0000447: RNCC: 2 | RNVC: 1

19 Oct 2005

5340-27-022-8306
Ar Tesisat Tutucu

270228306
05001FT0045: RNCC: 2 | RNVC: 1

23 Apr 2004

5340-27-057-8485
Takma-Sokme Aparat

270578485
CV72355-AT60088: RNCC: 2 | RNVC: 1

7 Nov 2012

5340-27-026-7744
Dust And Moisture Seal Protective Cover

270267744
20459894-0: RNCC: 2 | RNVC: 1

1 Aug 2005

5340-27-018-6513
Buckle

270186513
33180110: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-029-6154
Utility Resilient Mount

270296154
4543121578: RNCC: 2 | RNVC: 1
4543121578: RNCC: 5 | RNVC: 9

24 Apr 2006

5340-27-040-1249
Dust And Moisture Seal Protective Cover

270401249
897298455251: RNCC: 2 | RNVC: 1

8 Jan 2008

5340-27-041-0210
Mounting Plate

270410210
180M0444: RNCC: 2 | RNVC: 1
18OM0444: RNCC: 2 | RNVC: 1

21 Apr 2008

5340-27-039-9206
Utility Resilient Mount

270399206
8200013905: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-027-5291
Protection Bellows

270275291
71A10-72065-AA: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-020-2940
Protection Bellows

270202940
3644: RNCC: 2 | RNVC: 1
3644: RNCC: 5 | RNVC: 2

1 Dec 2003

5340-27-005-5916
Manual Control Lever

270055916
92VT-2780-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-008-5486
Angle Bracket

270085486
4566230386: RNCC: 2 | RNVC: 1
45-6623-0386: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-27-013-1935
Mounting Plate

270131935
6040-0532-8055: RNCC: 2 | RNVC: 1
6040-0532-8055: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-057-3596
Montaj Ayak

270573596
2.HIBM-4H-0666/1/J-A9-1-0001: RNCC: 2 | RNVC: 1

24 Jul 2012

5340-27-012-2094
Tente Gergl Lastigi

270122094
10131YL0202: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-035-5557
Engine Accessory Bracket

270355557
20405673: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-005-1579
Manual Control Lever

270051579
1010000286: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1555
Dust And Moisture Seal Protective Cap

270051555
1010000199: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-041-6765
Dust And Moisture Seal Protective Cap

270416765
1010FK-2810933: RNCC: 2 | RNVC: 1

11 Jun 2008

5340-27-054-7857
Utility Resilient Mount

270547857
202868: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-036-8749
Engine Accessory Bracket

270368749
3825534: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-055-2686
Sabitleme Parcasi

270552686
H234302701: RNCC: 2 | RNVC: 1

25 Nov 2011

5340-27-023-0360
Dust And Moisture Seal Protective Cover

270230360
26056T: RNCC: 2 | RNVC: 1

14 May 2004

5340-27-050-6236
Dust And Moisture Seal Protective Cover

270506236
301AG86: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-047-4046
Dust And Moisture Seal Protective Plug

270474046
897261587051: RNCC: 2 | RNVC: 1

1 Dec 2009

5340-27-051-1798
Utility Resilient Mount

270511798
103042: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-045-7245
Tutucu Parca

270457245
310-01.330.00: RNCC: 2 | RNVC: 2

8 Jun 2009

5340-27-054-6660
Manual Control Lever

270546660
TTAR01060301294/27DCR500: RNCC: 2 | RNVC: 1
27 D CR 500: RNCC: 5 | RNVC: 9

6 Oct 2011

5340-27-058-5290
Key Blank

270585290
102-F490-2340-011-000-0: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-048-3507
Tutamak

270483507
302727: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-059-4038
Lastik Takoz

270594038
200008510060: RNCC: 2 | RNVC: 1

30 Jul 2013

5340-27-021-3444
Double Angle Bracket

270213444
1010FG-0000409: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-6205
Mounting Plate

270146205
5999-0311-1054: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-012-6440
Clamping Catch Fastener

270126440
6009-0534-1008: RNCC: 2 | RNVC: 1
6009-0534-1008: RNCC: 2 | RNVC: 1

27 Feb 2002

5340-27-025-0857
Mounting Plate

270250857
1010FG-0000310: RNCC: 2 | RNVC: 1

30 Dec 2004

5340-27-017-1948
Mounting Plate

270171948
05191-10150-1: RNCC: 2 | RNVC: 1
L40-0045: RNCC: 2 | RNVC: 1

27 May 2003

5340-27-046-0759
Tespit Parca

270460759
60-002-K-UGT-DONANIM-PMU-TP: RNCC: 2 | RNVC: 1

7 Jul 2009

5340-27-010-2677
Double Angle Bracket

270102677
10131YS0833: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-047-2320
Utility Resilient Mount

270472320
DA0057583: RNCC: 3 | RNVC: 2

13 Nov 2009

5340-27-012-1884
Spring Tension Clip

270121884
W701496: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-056-1203
Koruyucu Tipa

270561203
480G-01108-1: RNCC: 5 | RNVC: 9

15 Feb 2012

5340-27-053-2560
Burc

270532560
740.06.10-02.035: RNCC: 2 | RNVC: 2

12 Apr 2011

5340-27-026-5858
Metal Olmay Tampon

270265858
64456-12010: RNCC: 2 | RNVC: 1

13 Jul 2005

5340-27-008-6584
Baskili Ekran

270086584
6033-0528-7001: RNCC: 2 | RNVC: 1
6033-0528-7001: RNCC: 2 | RNVC: 1

11 Dec 2000

5340-27-050-8406
Manual Control Lever

270508406
6J8-43181-01: RNCC: 3 | RNVC: 2
6J8-43181-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-024-3121
Retaining Clip

270243121
57262-25000: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-011-8224
Dust And Moisture Seal Protective Cap

270118224
8C-67: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-048-9232
Mounting Plate

270489232
10029351: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-049-1674
Dust And Moisture Seal Protective Cover

270491674
7700426665: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-039-5544
Dust And Moisture Seal Protective Cover

270395544
20551396: RNCC: 2 | RNVC: 1

7 Dec 2007

5340-27-048-2779
Retaining Clip

270482779
1239900292: RNCC: 2 | RNVC: 2
1239900292: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-27-011-0586
Protection Bellows

270110586
45 4311 0570: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-025-3996
Utility Resilient Mount

270253996
L70B15: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-035-8172
Dust And Moisture Seal Protective Plug

270358172
981735: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-023-3665
Mounting Plate

270233665
2ABMK 00383: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-021-2867
Casement Fastener

270212867
1009.1KI.0264-1*1-6.1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-8999
Mounting Plate

270228999
1.HIBM-1I-1455: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-028-4156
Dust And Moisture Seal Protective Cover

270284156
72A16-67250-AA: RNCC: 2 | RNVC: 1

29 Dec 2005

5340-27-022-8769
Dust And Moisture Seal Protective Plug

270228769
96395-0103: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-044-4424
Utility Resilient Mount

270444424
51804747: RNCC: 2 | RNVC: 1

5 Feb 2009

5340-27-015-6937
Mounting Plate

270156937
10091KI0150: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-058-5600
Tapa

270585600
901-KA-271-8: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-057-0035
Montaj Ayak

270570035
2.HIBM-4H-0666/4/H-0015: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-043-7566
Headless Straight Rod

270437566
4422A010: RNCC: 2 | RNVC: 1

5 Dec 2008

5340-27-049-0985
Utility Resilient Mount

270490985
7703034247: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-27-012-9948
Dust And Moisture Seal Protective Plug

270129948
8200085579: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-012-9680
Dust And Moisture Seal Protective Cover

270129680
35V1010800: RNCC: 2 | RNVC: 1

5 Apr 2002

5340-27-023-8432
Manual Control Lever

270238432
2K200278: RNCC: 2 | RNVC: 1

12 Aug 2004

5340-27-005-7659
Multiple Angle Bracket

270057659
10131YB0597: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-051-5160
Utility Resilient Mount

270515160
XM345K498AA: RNCC: 2 | RNVC: 1

3 Nov 2010

5340-27-050-8040
Kapak

270508040
501-03-01-01-04-308: RNCC: 2 | RNVC: 2
501-03-01-01-04-308: RNCC: 2 | RNVC: 2

1 Sep 2010

5340-27-018-2257
Lock-Release Lever

270182257
98000593-3: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-052-3861
Destek Ray

270523861
72C03-73638-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-015-0470
Mounting Plate

270150470
1010FK-1811361: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-7551
Koruyucu Lastik

270397551
5340-TJ-03248: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-010-1730
Extension Drawer Slide

270101730
98005790: RNCC: 2 | RNVC: 1

12 Nov 2001

5340-27-049-2942
Retaining Clip

270492942
7703080115: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-27-022-3409
Dust And Moisture Seal Protective Cover

270223409
57RS300926: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-011-0517
Helical Compression Spring Retainer

270110517
7115310371: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-049-8948
Ara Parcasi

270498948
10091YF7006: RNCC: 2 | RNVC: 1

9 Jun 2010

5340-27-058-2116
Retaining Clip

270582116
16031-ZY3-010: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-029-7143
Protection Bellows

270297143
72B15-60321-AA: RNCC: 2 | RNVC: 1

4 May 2006

5340-27-018-6382
Cushioning Pad

270186382
1010FG-0306171: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-044-3846
Spring Tension Clip

270443846
81.97430-0043: RNCC: 2 | RNVC: 1

2 Feb 2009

5340-27-027-0056
Malzeme Dolab Kilit

270270056
2ABMK01529: RNCC: 2 | RNVC: 1

18 Aug 2005

5340-27-050-6166
Zirh Kapak

270506166
180110-000-0: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-044-8441
Tutucu

270448441
L-511-20040: RNCC: 5 | RNVC: 9

17 Mar 2009

5340-27-052-3201
Dust And Moisture Seal Protective Cover

270523201
16F00-08240-AA: RNCC: 2 | RNVC: 1

6 Jan 2011

5340-27-015-6936
Mounting Plate

270156936
10091KI0149: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-008-3476
Mounting Plate

270083476
6040-0915-6001: RNCC: 2 | RNVC: 1
6040-0915-6001: RNCC: 2 | RNVC: 1

20 Sep 2000

5340-27-050-3921
Mounting Plate

270503921
274.17: RNCC: 2 | RNVC: 1

22 Jul 2010

5340-27-005-9551
Retaining Clip

270059551
PTM8409: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-022-9550
Dust And Moisture Seal Protective Plug

270229550
44884: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-003-8298
Electronic Equipment Hardware Kit

270038298
3522-1430-2510: RNCC: 2 | RNVC: 1
3522-1430-2510: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-042-7504
Retaining Clip

270427504
577873-L: RNCC: 2 | RNVC: 1

10 Sep 2008

5340-27-018-3598
Mounting Actuator Plate

270183598
10121YP5557: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-047-8154
Kilit

270478154
56214: RNCC: 2 | RNVC: 1

17 Dec 2009

5340-27-025-0049
Mounting Plate

270250049
73-3579-1885: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-019-8109
Vehicular Seat Bracket

270198109
1010FK-1811557: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3975
Mounting Plate

270173975
1009.1IS.0052-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-9896
Mounting Plate

270559896
5340-TJ-03396: RNCC: 2 | RNVC: 1

20 Jan 2012

5340-27-037-7127
Dust And Moisture Seal Protective Cover

270377127
48522-30K01: RNCC: 5 | RNVC: 9

22 Aug 2007

5340-27-015-2005
Utility Resilient Mount

270152005
10121HT0237: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-046-6616
Mounting Plate

270466616
2ABEP01129: RNCC: 2 | RNVC: 1

24 Sep 2009

5340-27-033-9475
Plastik Takoz

270339475
YTE.033.M.M.19: RNCC: 2 | RNVC: 1

30 Nov 2006

5340-27-021-4406
Mounting Plate

270214406
1009.1KI.0299: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-4777
Dust And Moisture Seal Protective Cap

270544777
H233512000: RNCC: 2 | RNVC: 1

15 Sep 2011

5340-27-032-2862
Baglanti Parcasi

270322862
6530T950282: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-006-8297
Instrument Mounting Clamp

270068297
71A10-36756-AA: RNCC: 2 | RNVC: 1
71A1036756AA: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-054-3464
Utility Resilient Mount

270543464
850900012R: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-27-058-4058
Headless Straight Rod

270584058
GR6900450: RNCC: 2 | RNVC: 1

23 Jan 2013

5340-27-036-4525
Kabin Kilit

270364525
3C465L382BA: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-27-053-6082
Manual Control Lever

270536082
185515005101: RNCC: 2 | RNVC: 1

26 May 2011

5340-27-013-0206
Utility Resilient Mount

270130206
7702253338: RNCC: 2 | RNVC: 1

11 Apr 2002

5340-27-039-3001
Retaining Clip

270393001
7703078007: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-052-2849
Buz On Hava Girisi

270522849
HVL-CKP-1003-205: RNCC: 2 | RNVC: 1

3 Jan 2011

5340-27-027-7686
Firca Sap

270277686
SAP, 3 M: RNCC: 2 | RNVC: 1
UZATMALI 3 MT: RNCC: 2 | RNVC: 1

28 Oct 2005

5340-27-045-7702
Koruyucu Kapak

270457702
10029387: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-013-6988
Retaining Clip

270136988
YC15 9A317 EA: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-006-0910
Expansion Plug

270060910
4K56898: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-042-1110
Utility Resilient Mount

270421110
7702128774: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-042-1263
Manual Control Handle

270421263
36208: RNCC: 2 | RNVC: 1

21 Jul 2008

5340-27-058-5126
Dust And Moisture Seal Protective Cap

270585126
VOE12742145: RNCC: 3 | RNVC: 2

15 Feb 2013

5340-27-017-8154
Retaining Strap

270178154
10131YK0882: RNCC: 2 | RNVC: 1

11 Sep 2003

5340-27-007-6870
Sectional Terminal Junction Block

270076870
5340-3365-0004: RNCC: 2 | RNVC: 1
1/4": RNCC: 2 | RNVC: 1
5340-3365-0004: RNCC: 2 | RNVC: 1

19 Jan 2000

5340-27-058-1770
Kilit Mekanizmasi

270581770
52000821: RNCC: 2 | RNVC: 1
52000821: RNCC: 5 | RNVC: 9

19 Dec 2012

5340-27-009-4348
Retaining Clip

270094348
7701205554: RNCC: 2 | RNVC: 1

5 Jul 2001

5340-27-037-4428
Utility Resilient Mount

270374428
12031-2330: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-008-3566
Retaining Clip

270083566
4400404: RNCC: 2 | RNVC: 1

25 Sep 2000

5340-27-038-0665
Engine Accessory Bracket

270380665
848922-1: RNCC: 2 | RNVC: 1

12 Sep 2007

5340-27-014-1454
Askilik

270141454
44102: RNCC: 2 | RNVC: 1
S 00-6385: RNCC: 2 | RNVC: 1
NVMA: RNCC: 2 | RNVC: 1
44102: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-005-1561
Spring Holder

270051561
1010001217: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-8384
Mounting Plate

270498384
KAIDE,30 CM.CAP: RNCC: 2 | RNVC: 1

4 Jun 2010

5340-27-057-7855
Mounting Plate

270577855
1010FMA-0000883-2: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-041-4220
Dust And Moisture Seal Protective Cover

270414220
83A18-61122-AA: RNCC: 2 | RNVC: 1

22 May 2008

5340-27-017-4069
Access Door Hinge

270174069
1009.1IS.0062-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-018-2443
Dust And Moisture Seal Protective Cover

270182443
3.08.01.05: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-026-7709
Dust And Moisture Seal Protective Cover

270267709
888710-1: RNCC: 2 | RNVC: 1

1 Aug 2005

5340-27-017-3978
Mounting Plate

270173978
1009.1IS.0054-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3998
Mounting Plate

270173998
1009.1IS.0061-5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-038-2829
Retaining Strap

270382829
65338-11H01: RNCC: 5 | RNVC: 9

26 Sep 2007

5340-27-036-6859
Dust And Moisture Seal Protective Cover

270366859
83A11-76214-AB: RNCC: 2 | RNVC: 1
83A11-76214-AC: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-009-3571
Mounting Plate

270093571
6030-0523-0001: RNCC: 2 | RNVC: 1
6030-0523-0001: RNCC: 2 | RNVC: 1

20 Jun 2001

5340-27-058-9886
Dust And Moisture Seal Protective Plug

270589886
VOE983711: RNCC: 3 | RNVC: 2
VOE983711: RNCC: 3 | RNVC: 2

13 May 2013

5340-27-027-8815
Yatak

270278815
B50-1-5-2: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-019-0388
Metal Olmay Tampon

270190388
F99/40300: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-3766
Helical Compression Spring Seat

270213766
9IML-0354: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-0621
Utility Resilient Mount

270580621
11911-ZY3-010: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-052-2514
Spring Holder

270522514
2520165-600-23: RNCC: 2 | RNVC: 1

29 Dec 2010

5340-27-027-0287
Retaining Clip

270270287
90467-08011: RNCC: 2 | RNVC: 1

24 Aug 2005

5340-27-006-1878
Elbow Catch

270061878
5K56418: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-022-4322
Dust And Moisture Seal Boot

270224322
22400: RNCC: 2 | RNVC: 1

9 Mar 2004

5340-27-008-2248
Mounting Plate

270082248
5999-0310-5018: RNCC: 2 | RNVC: 1
5999-0310-5018: RNCC: 2 | RNVC: 1

11 Aug 2000

5340-27-033-0445
Dust And Moisture Seal Protective Cover

270330445
13D00-70040-AA: RNCC: 2 | RNVC: 1

12 Oct 2006

5340-27-038-8113
Temizleme Aparati

270388113
70X30 CM: RNCC: 2 | RNVC: 1

1 Nov 2007

5340-27-053-9355
Camekan Kapi Grubu

270539355
1955X1410: RNCC: 2 | RNVC: 1

8 Jul 2011

5340-27-035-6513
Retaining Clip

270356513
46519230: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-008-2281
Lever Bracket

270082281
99006142: RNCC: 2 | RNVC: 1

15 Aug 2000

5340-27-040-2912
Utility Resilient Mount

270402912
8200014931: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-009-6862
Retaining Clip

270096862
6995 T6: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-012-4634
Dust And Moisture Seal Protective Plug

270124634
7700841674: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-041-6499
Utility Resilient Mount

270416499
7253659: RNCC: 2 | RNVC: 1

10 Jun 2008

5340-27-007-5007
Retaining Clip

270075007
3B74102: RNCC: 2 | RNVC: 1

2 Dec 1999

5340-27-012-9996
Retaining Clip

270129996
5943973: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-057-5743
Mounting Plate

270575743
M521D381120000: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-041-2751
Retaining Clip

270412751
7253492: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-009-7279
Dust And Moisture Seal Protective Plug

270097279
8327 WQ: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-013-5907
Retaining Clip

270135907
W702070 S300: RNCC: 2 | RNVC: 1

1 Jul 2002

5340-27-055-2599
Mounting Plate

270552599
UG 017000 POZ-16: RNCC: 2 | RNVC: 1
UG 017000 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-057-1741
Ampul Yazi Maki Kol

270571741
AK-1: RNCC: 3 | RNVC: 1

28 Jun 2012

5340-27-021-8623
Mounting Plate

270218623
1009 1AD 0032-1: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-044-4891
Cam Fitil

270444891
58RS172433: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-049-9956
Kapak Tutucu

270499956
16477011: RNCC: 5 | RNVC: 9

16 Jun 2010

5340-27-017-3929
Retaining Bail

270173929
1009.1IS.0029-6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-029-6538
Retaining Clip

270296538
90468-08104-00: RNCC: 2 | RNVC: 1

27 Apr 2006

5340-27-057-8894
Takma-Sokme Aparat

270578894
KCU19-9U-6895: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-051-4557
Utility Resilient Mount

270514557
VG-2: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-27-048-4938
Headless Straight Rod

270484938
HD114114-01: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-027-9440
Mounting Plate

270279440
6040-0532-8056: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-038-7262
Mounting Plate

270387262
122536642S: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-038-5120
Mounting Plate

270385120
MM-7450-0024: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-021-4818
Metal Olmay Tampon

270214818
1010FG-1801390: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8121
Mounting Plate

270278121
1501502070: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-054-2023
Retaining Clip

270542023
05001DM0089: RNCC: 2 | RNVC: 1

8 Aug 2011

5340-27-013-3344
Dust And Moisture Seal Protective Cap-Plug

270133344
F4XH 19D702 AA: RNCC: 2 | RNVC: 1

4 Jun 2002

5340-27-005-1771
Webbing Strap

270051771
1010002128: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-032-6831
Dust And Moisture Seal Protective Cover

270326831
13D00-56283-AA: RNCC: 2 | RNVC: 1

7 Sep 2006

5340-27-019-8086
Vehicular Seat Bracket

270198086
1010FK-1811358: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-8328
Retaining Clamp Assembly

270498328
111-29: RNCC: 2 | RNVC: 1
7335793127: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-056-1173
Mounting Plate

270561173
31300900: RNCC: 3 | RNVC: 2
31300970: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-27-035-8581
Retaining Clip

270358581
7660373: RNCC: 2 | RNVC: 1

3 Apr 2007

5340-27-007-0417
Expansion Plug

270070417
8K93243: RNCC: 2 | RNVC: 1

20 Jul 1999

5340-27-046-9155
Retaining Clip

270469155
894154844051: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-27-045-4618
Dust And Moisture Seal Protective Plug

270454618
MN179539: RNCC: 3 | RNVC: 2

11 May 2009

5340-27-008-3877
Dedektor Sap

270083877
6040-0516-1015: RNCC: 2 | RNVC: 1
6040-0516-1015: RNCC: 2 | RNVC: 1

29 Sep 2000

5340-27-005-1647
Manual Control Handle

270051647
1010002561: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-007-4728
Mounting Bracket

270074728
91AG F46648 AC: RNCC: 2 | RNVC: 1

29 Nov 1999

5340-27-024-3120
Retaining Clip

270243120
57261-25500: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-014-6490
Mounting Plate

270146490
5999-0312-3019: RNCC: 2 | RNVC: 1
5999-0312-3019: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-051-6325
Utility Resilient Mount

270516325
3EC-04-12160: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-27-014-6491
Mounting Plate

270146491
5999-0312-3020: RNCC: 2 | RNVC: 1
5999-0312-3020: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-023-2333
Dust And Moisture Seal Protective Plug

270232333
44326-1320: RNCC: 2 | RNVC: 1

9 Jun 2004

5340-27-057-1965
Baglanti Parcasi

270571965
2.HIBM-4H-0666/4/C-0008: RNCC: 2 | RNVC: 1

2 Jul 2012

5340-27-021-8791
Mounting Plate

270218791
KMS 0002: RNCC: 2 | RNVC: 1

8 Jan 2004

5340-27-019-6288
Buckle

270196288
05001HT0002: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-8523
Retaining Clip

270508523
99009-35500: RNCC: 3 | RNVC: 2
99009-35500: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-042-7646
Manual Control Lever

270427646
347586-L: RNCC: 2 | RNVC: 1

10 Sep 2008

5340-27-036-1267
Retaining Clip

270361267
14642496: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-043-4751
Dust And Moisture Seal Protective Cover

270434751
038593N: RNCC: 2 | RNVC: 1

13 Nov 2008

5340-27-052-1668
Utility Resilient Mount

270521668
40X20X200 MM: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-028-3970
Headless Straight Rod

270283970
7701470766: RNCC: 2 | RNVC: 1

28 Dec 2005

5340-27-009-6695
Pawl Fastener

270096695
8724 53: RNCC: 2 | RNVC: 1

15 Aug 2001

5340-27-013-8019
Retaining Clip

270138019
6500 76: RNCC: 2 | RNVC: 1

25 Jul 2002

5340-27-035-7353
Engine Accessory Bracket

270357353
3826659: RNCC: 2 | RNVC: 1

27 Mar 2007

5340-27-039-1488
Engine Accessory Bracket

270391488
3843123: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-042-9588
Spring Tension Clip

270429588
40.110.9403: RNCC: 2 | RNVC: 1
40.110.9403: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-029-0106
Pim Mentese

270290106
5315MNTS9880019: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-042-9564
Baglanti Parcasi

270429564
40.270.5948: RNCC: 2 | RNVC: 1
40.270.5948: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-049-1281
Dust And Moisture Seal Protective Plug

270491281
960069: RNCC: 3 | RNVC: 2

6 Apr 2010

5340-27-020-3219
Protection Bellows

270203219
3.08.01.19: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-051-5601
Retaining Strap

270515601
103075-4: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-052-8929
Toka

270528929
A-0078-00: RNCC: 2 | RNVC: 1

4 Mar 2011

5340-27-016-8196
Mounting Plate

270168196
10091AD0011: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-039-0678
Pawl Fastener

270390678
5340KK0103954: RNCC: 2 | RNVC: 1

12 Nov 2007

5340-27-015-5520
Mounting Plate

270155520
640689: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8256
Ispanyolet

270158256
02TMO1ISO1003: RNCC: 2 | RNVC: 1
ISPANYOLET,80.LIK: RNCC: 5 | RNVC: 2

15 May 2002

5340-27-020-5601
Kapak Tutucu

270205601
1010FG-0800625: RNCC: 2 | RNVC: 1
1010FG-0800625: RNCC: 2 | RNVC: 1

12 Dec 2003

5340-27-040-5254
Kenar Siki Kelepce

270405254
030002.00.0.0: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-001-7191
Multiple Angle Bracket

270017191
TM55-1520-210-2205-031-837-27S: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-054-8078
Pvc Pencere Kol

270548078
DO-301: RNCC: 5 | RNVC: 9

14 Oct 2011

5340-27-050-8042
Kapak

270508042
501-03-01-01-04-309: RNCC: 2 | RNVC: 2
501-03-01-01-04-309: RNCC: 2 | RNVC: 2

1 Sep 2010

5340-27-017-3962
Mounting Plate

270173962
1009.1IS.0044-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-050-1982
Gerdirme Kayis

270501982
79C00-35454-AA: RNCC: 2 | RNVC: 1

6 Jul 2010

5340-27-049-7272
Mesnet

270497272
11626369: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-001-2232
Solenoid Bracket

270012232
42312: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-27-003-9195
Handle Grip

270039195
07001MN0076: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-026-3908
Dust And Moisture Seal Protective Cover

270263908
13559-22011: RNCC: 2 | RNVC: 1

6 Jul 2005

5340-27-011-8251
Dust And Moisture Seal Protective Plug

270118251
G17: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-016-8199
Mounting Plate

270168199
10091AD0012-3: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-015-6699
Dust And Moisture Seal Protective Plug

270156699
05001FK0014: RNCC: 2 | RNVC: 1
CAX219-2: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-057-3834
Dust And Moisture Seal Protective Cover

270573834
K-1003033-1: RNCC: 5 | RNVC: 9

27 Jul 2012

5340-27-041-0781
Tutucu

270410781
1010FK-2701402: RNCC: 2 | RNVC: 1
24FK1-512000.27: RNCC: 2 | RNVC: 1

29 Apr 2008

5340-27-038-1410
Manual Control Lever

270381410
48970-R3402: RNCC: 5 | RNVC: 9

17 Sep 2007

5340-27-044-4025
Manual Control Lever

270444025
12B18-67058-AA: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-035-6767
Dust And Moisture Seal Protective Cover

270356767
897167766051: RNCC: 2 | RNVC: 1

23 Mar 2007

5340-27-035-5590
Engine Accessory Bracket

270355590
3837996: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-044-9708
Retaining Clip

270449708
MR653861: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-005-6041
Mounting Bracket

270056041
92VT-9K080-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-034-4329
Dust And Moisture Seal Protective Plug

270344329
AKCAAGAC: RNCC: 2 | RNVC: 1

5 Jan 2007

5340-27-039-2287
Dust And Moisture Seal Protective Cover

270392287
83A24-73506-AA: RNCC: 2 | RNVC: 1

20 Nov 2007

5340-27-055-3290
Utility Resilient Mount

270553290
84402508: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-021-3927
Buckle

270213927
05001HT0001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-9194
Retaining Clip

270399194
8200177919: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-022-8409
Vehicular Seat Bracket

270228409
1010FG-0000630: RNCC: 2 | RNVC: 1

27 Apr 2004

5340-27-055-7700
Cerceve Takimi

270557700
42377: RNCC: 2 | RNVC: 1

3 Jan 2012

5340-27-008-9693
Kaucuk Tampon

270089693
46439600: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-055-2613
Mounting Plate

270552613
UG 036000 POZ-13: RNCC: 2 | RNVC: 1
UG 036000 POZ-13: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-048-4666
Retaining Clip

270484666
HD102110: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-007-5005
Retaining Clip

270075005
3B83773: RNCC: 2 | RNVC: 1

2 Dec 1999

5340-27-049-5107
Antipilferage Seal

270495107
KURSUN DAIRESEL 12MM: RNCC: 2 | RNVC: 1

5 May 2010

5340-27-058-7255
Mounting Plate

270587255
M535E318000100: RNCC: 2 | RNVC: 1

21 Mar 2013

5340-27-022-5051
Manual Control Lever

270225051
9900612000: RNCC: 2 | RNVC: 1
9900612000: RNCC: 5 | RNVC: 9

17 Mar 2004

5340-27-005-9750
Dust And Moisture Seal Protective Cap

270059750
KOE1008: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-042-8406
Retaining Clip

270428406
7711172222: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-050-9726
Manual Control Lever

270509726
63D-44144-00: RNCC: 3 | RNVC: 2
63D-44144-00: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-27-007-9443
Metal Olmayan Takoz

270079443
8B81950: RNCC: 2 | RNVC: 1

27 Apr 2000

5340-27-003-8275
Electronic Equipment Hardware Kit

270038275
6005-0516-1008: RNCC: 2 | RNVC: 1
6005-0516-1008: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-038-5123
Tespit Parca

270385123
MM-7450-0021: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-017-2130
Mounting Plate

270172130
H-39-4402-01: RNCC: 2 | RNVC: 1

28 May 2003

5340-27-038-3345
Engine Accessory Bracket

270383345
847956: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-023-2768
Retaining Clip

270232768
40V0711491: RNCC: 2 | RNVC: 1

15 Jun 2004

5340-27-022-1329
Dust And Moisture Seal Protective Cap

270221329
1.HIBM-1I-2138: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-054-7149
Kaput Ayar Lastik

270547149
7700843545: RNCC: 2 | RNVC: 1
7700418939: RNCC: 2 | RNVC: 1
7700843545: RNCC: 5 | RNVC: 9
7700418939: RNCC: 5 | RNVC: 9

10 Oct 2011

5340-27-032-1874
Kapak Kilit

270321874
002450-001-703C: RNCC: 2 | RNVC: 1
002450-001-703C: RNCC: 2 | RNVC: 1

7 Jun 2006

5340-27-005-6188
Mounting Bracket

270056188
6429 F9: RNCC: 2 | RNVC: 1
92VB-17651-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-049-3927
Govde

270493927
1010FK-1911120-1: RNCC: 2 | RNVC: 1

28 Apr 2010

5340-27-053-5720
Clip

270535720
C-500626: RNCC: 2 | RNVC: 1

23 May 2011

5340-27-036-8292
Mounting Plate

270368292
40.205.3848: RNCC: 2 | RNVC: 1
40.205.3848: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-058-8803
Mounting Plate

270588803
R030004: RNCC: 5 | RNVC: 9

24 Apr 2013

5340-27-058-7377
Hand Carrying Strap Assembly

270587377
5340-TJ1-10388: RNCC: 2 | RNVC: 1

26 Mar 2013

5340-27-050-8008
Baglanti Elemani

270508008
KUR-3: RNCC: 2 | RNVC: 1

31 Aug 2010

5340-27-036-1148
Askilik

270361148
EM-093: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-009-3193
Dust And Moisture Seal Protective Cover

270093193
81.50101.5141: RNCC: 2 | RNVC: 1

13 Jun 2001

5340-27-008-9276
Retaining Clip

270089276
7753980: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-040-4944
Mounting Plate

270404944
10916695: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-020-2873
Gece Gorus Pe Kapak

270202873
1206KMK0344: RNCC: 2 | RNVC: 1

21 Nov 2003

5340-27-054-4655
Mounting Plate

270544655
T532-H4000-160: RNCC: 2 | RNVC: 1

14 Sep 2011

5340-27-013-7731
Retaining Clip

270137731
YC1T 14A163 AB: RNCC: 2 | RNVC: 1

22 Jul 2002

5340-27-013-2341
Spacing Threaded Standoff

270132341
36V0120300: RNCC: 2 | RNVC: 1

17 May 2002

5340-27-054-5915
Dust And Moisture Seal Protective Cap-Plug

270545915
109397: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-048-2315
Retaining Clip

270482315
81 DBE 13209ABFA: RNCC: 3 | RNVC: 2

21 Jan 2010

5340-27-016-5840
Retaining Clamp Assembly

270165840
8B84599: RNCC: 2 | RNVC: 1

6 Feb 2003

5340-27-039-5221
Izgara

270395221
900X200X35: RNCC: 2 | RNVC: 1

6 Dec 2007

5340-27-027-9383
Mounting Plate

270279383
6040-4014-0003: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-025-4915
Dust And Moisture Seal Protective Plug

270254915
Q/Z285-4: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-040-4646
Baglanti Parcasi

270404646
2862345-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-053-5039
Mounting Plate

270535039
H342422701: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-045-1278
Dust And Moisture Seal Boot

270451278
795-00018: RNCC: 2 | RNVC: 2

9 Apr 2009

5340-27-057-7425
Utility Resilient Mount

270577425
1460522305: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-028-7663
Manual Control Lever

270287663
16001YK0811: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-034-7128
Dust And Moisture Seal Protective Plug

270347128
4203896: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-017-0149
Mounting Plate

270170149
98003182: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-021-8339
Retaining Clip

270218339
46182500013: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-035-4370
Retaining Clip

270354370
1301513080: RNCC: 2 | RNVC: 1

14 Mar 2007

5340-27-012-2099
Multiple Angle Bracket

270122099
10131YP0254: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-008-2759
Montaj Kiti

270082759
5820-8135-1002: RNCC: 2 | RNVC: 1
5820-8135-1002: RNCC: 2 | RNVC: 1

6 Sep 2000

5340-27-024-3185
Retaining Clip

270243185
85618-36000: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-005-1464
Quick Release Plunger

270051464
1010001232: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-034-7228
Dust And Moisture Seal Protective Cover

270347228
135E85: RNCC: 2 | RNVC: 1

2 Feb 2007

5340-27-026-2023
Dust And Moisture Seal Protective Plug

270262023
37564: RNCC: 2 | RNVC: 1
2010.9081.008: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-026-8267
Hand Carrying Strap Assembly

270268267
11051YK0678: RNCC: 2 | RNVC: 1

3 Aug 2005

5340-27-005-1663
Double Angle Bracket

270051663
1010001327: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-013-1775
Retaining Clip

270131775
46770966: RNCC: 2 | RNVC: 1

9 May 2002

5340-27-024-1566
Retaining Clamp Assembly

270241566
3HD UNI 006: RNCC: 2 | RNVC: 1

23 Sep 2004

5340-27-011-8202
Dust And Moisture Seal Protective Cap

270118202
5340KIM0012: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-008-8739
Retaining Clip

270088739
46449191: RNCC: 2 | RNVC: 1

6 Feb 2001

5340-27-008-3862
Ozel Sekilli Pul

270083862
6005-0517-5056: RNCC: 2 | RNVC: 1
6005-0517-5056: RNCC: 2 | RNVC: 1

29 Sep 2000

5340-27-021-9321
Dust And Moisture Seal Protective Cover

270219321
50-534553-5: RNCC: 2 | RNVC: 1

14 Jan 2004

5340-27-036-8828
Engine Accessory Bracket

270368828
479559-7: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-012-9936
Dust And Moisture Seal Protective Plug

270129936
8200085577: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-012-6332
Double Angle Bracket

270126332
1.HIBM-6B-349T02: RNCC: 2 | RNVC: 1

19 Feb 2002

5340-27-055-0127
Kapak Tutucu

270550127
M10.2.230: RNCC: 5 | RNVC: 9

28 Oct 2011

5340-27-009-8513
Door Handle

270098513
4185967-1: RNCC: 2 | RNVC: 1

19 Sep 2001

5340-27-057-9566
Retaining Clip

270579566
16163-GHB-600: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-014-3868
Dust And Moisture Seal Protective Cap-Plug

270143868
W707236 S300: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-016-7766
Mounting Plate

270167766
H-39-0255-50: RNCC: 2 | RNVC: 1

12 Mar 2003

5340-27-054-4420
Casement Fastener

270544420
98022759: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-004-5105
Nut And Bolt Locking Plate

270045105
10121YS5241: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-036-5900
Runner

270365900
10003681: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-043-0990
Denge Ayagi

270430990
2ABEP00974: RNCC: 2 | RNVC: 1

13 Oct 2008

5340-27-032-6860
Doner Govd Tekerlek

270326860
5102-DYR-200: RNCC: 5 | RNVC: 9

8 Sep 2006

5340-27-034-1080
Birlestirme Parcasi

270341080
9BM 5340-00089: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-044-5517
Tutamak

270445517
BF0-5242-020000: RNCC: 2 | RNVC: 1
BF0-5242-020000: RNCC: 5 | RNVC: 9

16 Feb 2009

5340-27-043-7446
Ment Montaj Kaidesi

270437446
2ZBEP01004: RNCC: 2 | RNVC: 1

4 Dec 2008

5340-27-035-5558
Engine Accessory Bracket

270355558
3836163: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-026-2930
Dust And Moisture Seal Protective Plug

270262930
MD700627: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-023-2650
Sac Mahfaza

270232650
1934151201: RNCC: 2 | RNVC: 1
4.06.16.01: RNCC: 2 | RNVC: 1

12 Jun 2004

5340-27-021-3400
Mounting Plate

270213400
1009.1KI.0147-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-4815
Dust And Moisture Seal Protective Cover

270254815
HRH24C5114 H24C5-12913: RNCC: 2 | RNVC: 1

22 Mar 2005

5340-27-042-5503
Baglanti Parcasi

270425503
1010006232: RNCC: 2 | RNVC: 1

22 Aug 2008

5340-27-012-9679
Dust And Moisture Seal Protective Cover

270129679
23V1711600: RNCC: 2 | RNVC: 1

5 Apr 2002

5340-27-040-7966
Retaining Clip

270407966
MK405140: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-034-0386
Dust And Moisture Seal Protective Cover

270340386
13D00-66110-AA: RNCC: 2 | RNVC: 1

6 Dec 2006

5340-27-024-5055
Dust And Moisture Seal Protective Plug

270245055
91248-22000: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-039-3057
Retaining Clip

270393057
8200208746: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-027-1714
Dust And Moisture Seal Protective Cover

270271714
MB160948: RNCC: 2 | RNVC: 1

13 Sep 2005

5340-27-004-5543
Double Angle Bracket

270045543
10091YA5005: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-053-9169
Utility Resilient Mount

270539169
98018546: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-27-053-1800
Retaining Clip

270531800
6009-4037-4009: RNCC: 2 | RNVC: 2

6 Apr 2011

5340-27-016-8851
Komples Kapi Kilit

270168851
0600-0107F03: RNCC: 2 | RNVC: 1

2 Apr 2003

5340-27-022-9846
Utility Resilient Mount

270229846
12575-1030: RNCC: 2 | RNVC: 1

8 May 2004

5340-27-013-9574
Retaining Bail

270139574
6040-0932-8016: RNCC: 2 | RNVC: 1
6040-0932-8016: RNCC: 2 | RNVC: 1

16 Aug 2002

5340-27-057-8877
Takma-Sokme Aparat

270578877
KCU19-147-2675: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-052-8942
Genisleyen Dubel

270528942
5680DA0000777: RNCC: 5 | RNVC: 9

4 Mar 2011

5340-27-005-9052
Lastik Takoz

270059052
11K8656: RNCC: 3 | RNVC: 2

17 Dec 1998

5340-27-054-6193
Permanent Magnet

270546193
C36D43: RNCC: 3 | RNVC: 2

3 Oct 2011

5340-27-042-3937
Manual Control Lever

270423937
KOL PENCERE: RNCC: 2 | RNVC: 1

13 Aug 2008

5340-27-018-1576
Manual Control Handle

270181576
897853765001: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-005-1813
Screw Thread Insert

270051813
1010002250: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-038-3344
Engine Accessory Bracket

270383344
849847: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-017-9059
Dust And Moisture Seal Protective Cover

270179059
894249289051: RNCC: 2 | RNVC: 1

6 Oct 2003

5340-27-014-8324
Sealing Plug Assembly

270148324
05.105.11.00: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-0654
Dust And Moisture Seal Protective Plug

270590654
VOE20792165: RNCC: 3 | RNVC: 2
VOE20792165: RNCC: 3 | RNVC: 2

22 May 2013

5340-27-047-8739
Dust And Moisture Seal Protective Cover

270478739
13C25-72716-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-021-2270
Mounting Plate

270212270
HJ5011: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-046-7862
Tutucu

270467862
303-1334: RNCC: 2 | RNVC: 1

7 Oct 2009

5340-27-029-8159
Dust And Moisture Seal Protective Cover

270298159
5PS-12252-00-00: RNCC: 5 | RNVC: 9

24 May 2006

5340-27-033-0196
Retaining Clip

270330196
46817858: RNCC: 2 | RNVC: 1

10 Oct 2006

5340-27-035-5540
Dust And Moisture Seal Protective Plug

270355540
7514921: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-007-7725
Window Retaining Plate

270077725
10131YL0064: RNCC: 2 | RNVC: 1

16 Feb 2000

5340-27-046-9748
Manual Control Lever

270469748
897364990051: RNCC: 2 | RNVC: 1

24 Oct 2009

5340-27-048-6994
Retaining Clip

270486994
7703077370: RNCC: 3 | RNVC: 2

22 Feb 2010

Load More Results