What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 5 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 5 of 53

5340-27-058-0565
Mending Plate

270580565
200623: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-022-9005
Angle Bracket

270229005
1.HIBM-1Q-278: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-007-1835
Access Cover

270071835
E 857084 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-028-0572
Mounting Bracket

270280572
71B21-76531-AA: RNCC: 2 | RNVC: 1

28 Nov 2005

5340-27-021-0350
Mounting Bracket

270210350
1009.1KI.0354-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-8799
Mending Plate

270128799
10131YS0886: RNCC: 2 | RNVC: 1

1 Apr 2002

5340-27-005-7651
Hook Handle

270057651
10131YK0649: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-054-6672
Mounting Bracket

270546672
55RS360145: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-019-2430
Expansion Shield

270192430
10131YK0662: RNCC: 2 | RNVC: 1
10131YK0662: RNCC: 2 | RNVC: 1
10131YK0662: RNCC: 5 | RNVC: 2

15 Nov 2003

5340-27-025-2796
Mounting Bracket

270252796
1010FG-0312933: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-035-0843
Retaining Clip

270350843
710083: RNCC: 2 | RNVC: 1

26 Feb 2007

5340-27-018-2375
Access Cover

270182375
3.01.01.07: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-020-9919
Mounting Bracket

270209919
1009.1KI.0264-2*2-3.1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-0880
Mending Plate

270530880
105462: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-27-036-8259
Bow Handle

270368259
40.270.4000: RNCC: 2 | RNVC: 1
40.270.4000: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-054-2872
Bridge Clamp

270542872
98021054: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-014-3372
Loop Clamp

270143372
51.97401.6060: RNCC: 2 | RNVC: 1

8 Oct 2002

5340-27-012-5555
Mounting Bracket

270125555
10131YS0791: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-006-8229
Mounting Bracket

270068229
ESR2313-L: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-013-2166
Flush Catch Claw

270132166
1010003233: RNCC: 2 | RNVC: 1
K-2166: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-026-0838
Butt Hinge Leaf

270260838
1010FK-1809783-1: RNCC: 2 | RNVC: 1

1 Jun 2005

5340-27-021-0326
Mounting Bracket

270210326
1009.1KI.0338-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-9835
Flush Lock

270149835
10091YK0304: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-004-5114
Access Cover

270045114
10121YK5237: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-021-3493
Mounting Bracket

270213493
1009.1KI.0306-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-5499
Angle Bracket

270595499
901-DS-111: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-023-9355
Angle Bracket

270239355
3103-2: RNCC: 2 | RNVC: 1

24 Aug 2004

5340-27-056-8652
Mending Plate

270568652
12349785-1: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-057-9603
Mounting Bracket

270579603
828720 1: RNCC: 3 | RNVC: 2

22 Nov 2012

5340-27-007-1606
Retaining Clip

270071606
E 860094 S: RNCC: 2 | RNVC: 1

10 Sep 1999

5340-27-016-6777
Bridge Clamp

270166777
83.97460.5509: RNCC: 2 | RNVC: 1

26 Feb 2003

5340-27-056-4418
Mending Plate

270564418
12313388-2: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-004-3211
Rod End Clevis

270043211
05001YC0007: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-043-6067
Mounting Bracket

270436067
454636W: RNCC: 2 | RNVC: 1

26 Nov 2008

5340-27-025-0166
Mounting Bracket

270250166
1009 1YS 1191: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-017-3550
Rod End Clevis

270173550
1009.1IS.0087-8: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-2110
Utility Access Door

270542110
RC475-P: RNCC: 5 | RNVC: 9

9 Aug 2011

5340-27-020-7568
Mending Plate

270207568
1009.1KI.0250-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-9819
Sliding Door Track

270569819
7T16V250A12CA: RNCC: 2 | RNVC: 1

6 Jun 2012

5340-27-058-7932
Mounting Bracket

270587932
55RS650832: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-034-3368
Mending Plate

270343368
4543110980: RNCC: 2 | RNVC: 1

25 Dec 2006

5340-27-056-4801
Mending Plate

270564801
202157: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-037-9351
Mounting Bracket

270379351
911-06-101: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-029-8771
Mounting Bracket

270298771
5PS-16340-00-00: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-024-2637
Mounting Bracket

270242637
91952-25100: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-007-1768
Retaining Clip

270071768
W 700406 S300: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-028-7908
Mounting Bracket

270287908
35001979: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-022-4218
Mounting Bracket

270224218
KMS 0037: RNCC: 2 | RNVC: 1

6 Mar 2004

5340-27-054-6705
Mounting Bracket

270546705
55RS860170: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-056-5542
Mending Plate

270565542
3835178: RNCC: 2 | RNVC: 2

10 Apr 2012

5340-27-015-1985
Caster Wheel

270151985
10121HT0172: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-045-2567
Bow Handle

270452567
7610A029HA: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-27-047-2781
Catch Strike

270472781
7700817724: RNCC: 3 | RNVC: 2

18 Nov 2009

5340-27-051-5378
Bow Handle

270515378
107120: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-053-2930
Mounting Bracket

270532930
H341103103: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-052-7454
Mending Plate

270527454
99 2A 100 17R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-034-8555
Catch Strike

270348555
13D00-55035-AB: RNCC: 2 | RNVC: 1

12 Feb 2007

5340-27-011-2447
Butt Hinge

270112447
07002YM0280: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-022-6215
Mounting Bracket

270226215
21831T: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-056-4807
Mending Plate

270564807
202243: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-053-3622
Mounting Bracket

270533622
H341162600: RNCC: 2 | RNVC: 1

22 Apr 2011

5340-27-015-8130
Mounting Bracket

270158130
2106001705: RNCC: 2 | RNVC: 1

13 Dec 2002

5340-27-058-3790
Access Cover

270583790
37546-03500: RNCC: 5 | RNVC: 9

18 Jan 2013

5340-27-036-0963
Access Cover

270360963
1010FK-2711863: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-059-2702
Mounting Bracket

270592702
55RS252142: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-042-5800
Access Cover

270425800
54552377: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-052-2008
Mending Plate

270522008
8.216.000.358.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-023-5400
Webbing Strap

270235400
8690506: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-056-7728
Mending Plate

270567728
SH-TZ-05-016: RNCC: 2 | RNVC: 2

10 May 2012

5340-27-015-7289
Butt Hinge

270157289
16001DM0007: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-4618
Mending Plate

270564618
202770: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-053-8144
Mending Plate

270538144
C174-610031: RNCC: 2 | RNVC: 2

23 Jun 2011

5340-27-056-8660
Mending Plate

270568660
98017240: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-025-3502
Mounting Bracket

270253502
897108643001: RNCC: 2 | RNVC: 1

1 Mar 2005

5340-27-036-5849
Mounting Bracket

270365849
C19B11: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-054-1755
Mending Plate

270541755
98020658: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-046-5722
Utility Access Door

270465722
280X290 CM: RNCC: 2 | RNVC: 1

7 Sep 2009

5340-27-048-3344
Catch Strike

270483344
79A01-61660-AA: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-27-055-5543
Handle Grip

270555543
502-21-U0-1020: RNCC: 2 | RNVC: 1

12 Dec 2011

5340-27-059-3040
Access Cover

270593040
98019105-16: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-040-2819
Access Cover

270402819
Y530-80111-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-060-0476
Mounting Bracket

270600476
MM-7490-0264: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-021-9687
Mounting Bracket

270219687
1009 1AD 0010/1: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-046-9378
Mechanical Stop

270469378
40.690.0031: RNCC: 2 | RNVC: 1

22 Oct 2009

5340-27-057-8023
Bridge Clamp

270578023
1010FMA-1202704: RNCC: 2 | RNVC: 1

23 Oct 2012

5340-27-057-5229
Mending Plate

270575229
ALTFC01206: RNCC: 2 | RNVC: 1

24 Aug 2012

5340-27-057-0027
Mending Plate

270570027
203633: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-012-5395
Mending Plate

270125395
10131YS0769: RNCC: 2 | RNVC: 1

8 Feb 2002

5340-27-029-2730
Mending Plate

270292730
1010FG-0608222: RNCC: 2 | RNVC: 1

17 Mar 2006

5340-27-020-8583
Loop Clamp

270208583
3IML-0311: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-4446
T Bracket

270184446
3522-1140-7700: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-9816
Mounting Bracket

270139816
6040-0522-8012: RNCC: 2 | RNVC: 1
6040-0522-8012: RNCC: 2 | RNVC: 1

21 Aug 2002

5340-27-044-4064
Synchro Clamp

270444064
06.43839-0077: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-058-8986
Crank Handle

270588986
901-KL-274: RNCC: 2 | RNVC: 1

26 Apr 2013

5340-27-021-1296
Mending Plate

270211296
1010FG-0000497: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-6372
Bridge Clamp

270476372
A2104760140: RNCC: 2 | RNVC: 2
A2104760140: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-27-018-6749
Mounting Bracket

270186749
1010FG-1801342: RNCC: 2 | RNVC: 1
HSN06-017: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-8031
Mending Plate

270538031
C175-000030: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-006-7120
Access Cover

270067120
S42023-A806-S2: RNCC: 2 | RNVC: 1

23 Mar 1999

5340-27-038-9552
Mending Plate

270389552
83A24-73274-AA: RNCC: 2 | RNVC: 1

6 Nov 2007

5340-27-051-1086
Mending Plate

270511086
104622: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-049-1599
Mending Plate

270491599
8200963249: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-043-8584
Mounting Bracket

270438584
11000-08053-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-035-5887
Mending Plate

270355887
72B04-61450-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-024-4828
Sliding Door Track

270244828
87261-25000: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-052-6148
Mending Plate

270526148
109299: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-27-050-1584
Bridge Clamp

270501584
103983: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-053-8542
Mounting Bracket

270538542
H346063100: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-051-9232
Access Cover

270519232
T570-H6700-100: RNCC: 2 | RNVC: 1

7 Dec 2010

5340-27-022-8994
Angle Bracket

270228994
SKCP2283-20: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-048-6908
Access Cover

270486908
7168-38: RNCC: 2 | RNVC: 1
7168-38: RNCC: 5 | RNVC: 9

19 Feb 2010

5340-27-050-0693
Mending Plate

270500693
104208: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-008-1208
Angle Bracket

270081208
99005488: RNCC: 2 | RNVC: 1

18 Jul 2000

5340-27-035-0988
Mounting Bracket

270350988
7633047: RNCC: 2 | RNVC: 1

27 Feb 2007

5340-27-053-8942
Bow Handle

270538942
109932: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-27-024-4814
Sliding Door Track

270244814
87251-25000: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-032-4398
Mounting Bracket

270324398
83A11-59281-AA: RNCC: 2 | RNVC: 1

12 Jul 2006

5340-27-051-4881
Mounting Bracket

270514881
400253-002: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-042-1255
Mending Plate

270421255
42721: RNCC: 2 | RNVC: 1

21 Jul 2008

5340-27-058-6548
Mounting Bracket

270586548
ADOP-SHELTER-280-BSOL: RNCC: 2 | RNVC: 1

5 Mar 2013

5340-27-022-7337
Mending Plate

270227337
23V2212100: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-043-3460
Mounting Bracket

270433460
74A07-62119-AA: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-032-2109
Elastic Strap

270322109
90465-10098-00: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-017-2342
Mending Plate

270172342
201867: RNCC: 2 | RNVC: 1
201867: RNCC: 2 | RNVC: 1

30 May 2003

5340-27-054-0265
Mounting Bracket

270540265
55RS351002: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-050-3855
Mending Plate

270503855
105229: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-015-0370
Loop Clamp

270150370
7358104: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-025-7382
Hand Crank

270257382
05001FK0249: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-032-7447
Flush Catch

270327447
83083400005: RNCC: 2 | RNVC: 1

13 Sep 2006

5340-27-019-6428
Webbing Strap

270196428
05001HS0028: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2855
Angle Bracket

270402855
Y532-60001-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-019-5793
Butt Hinge

270195793
RIG-03-239: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-5589
Angle Bracket

270595589
901-DS-124: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-040-2866
Access Cover

270402866
Y531-61000-206: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-058-9070
Access Cover

270589070
M532F635120600: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-048-4194
Mending Plate

270484194
319193: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-059-6417
Loop Clamp

270596417
901-KL-324: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-054-8550
Mounting Bracket

270548550
H346035900: RNCC: 2 | RNVC: 1

19 Oct 2011

5340-27-057-1007
Bridge Clamp

270571007
2.HIBM-4H-0666/1/Z-0003: RNCC: 2 | RNVC: 1

20 Jun 2012

5340-27-052-7119
Loop Clamp

270527119
DIN3016-1-D1-70-25-W3-CR: RNCC: 2 | RNVC: 2

17 Feb 2011

5340-27-027-1069
Mounting Bracket

270271069
1010FK-2808615: RNCC: 2 | RNVC: 1

5 Sep 2005

5340-27-020-4401
Webbing Strap

270204401
98013955: RNCC: 2 | RNVC: 1

8 Dec 2003

5340-27-058-5538
Mending Plate

270585538
37723-03800: RNCC: 5 | RNVC: 9

20 Feb 2013

5340-27-007-8925
Mending Plate

270078925
10131YT0103: RNCC: 2 | RNVC: 1

13 Apr 2000

5340-27-042-9931
Mounting Bracket

270429931
40.624.0149: RNCC: 2 | RNVC: 1
40.624.0149: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-028-7377
Bail Handle

270287377
110X24X10: RNCC: 2 | RNVC: 1

2 Feb 2006

5340-27-041-7409
Handle Grip

270417409
1010FK-2810927: RNCC: 2 | RNVC: 1

13 Jun 2008

5340-27-006-1893
Access Cover

270061893
2K56168: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-054-7768
Drift Bolt

270547768
A9472650249: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-023-5509
Angle Bracket

270235509
4254201686: RNCC: 2 | RNVC: 1
10121YK5902: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-035-5125
Bail Handle

270355125
901-BK-125: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-005-1500
Loop Clamp

270051500
1010000969: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-018-7095
Mounting Bracket

270187095
1010FK-3505365: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9545
Mounting Bracket

270069545
83BG 18A457 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-024-8339
Filler Opening Cap

270248339
150210006: RNCC: 2 | RNVC: 1
F1 131 D/S/K: RNCC: 2 | RNVC: 1

9 Dec 2004

5340-27-029-3817
Mounting Bracket

270293817
1.HIBM-1I-2368: RNCC: 2 | RNVC: 1

24 Mar 2006

5340-27-049-9683
Mending Plate

270499683
HD1001B5: RNCC: 2 | RNVC: 2
HD1001B5: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-054-7635
Access Cover

270547635
100456: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-021-4585
Bow Handle

270214585
1010FK-2701504: RNCC: 2 | RNVC: 1
1010FK-2701504: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-0700
Mending Plate

270500700
104451: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-006-8179
Elbow Catch

270068179
Y3920762: RNCC: 2 | RNVC: 1

13 May 1999

5340-27-008-4588
Rod End Clevis

270084588
8558333: RNCC: 2 | RNVC: 1

12 Oct 2000

5340-27-021-4559
Mortise Lock Set

270214559
07002YK0302: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-7997
Mounting Bracket

270397997
BMT300-M5: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-021-0328
Lock Key

270210328
1009.1KI.0237-5: RNCC: 2 | RNVC: 1
1009.1KI.0347-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-6481
Loop Clamp

270216481
KELEPCE 1/2: RNCC: 2 | RNVC: 1

22 Dec 2003

5340-27-008-3227
Latch Bar

270083227
MKE 400 160: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-021-4324
Mounting Bracket

270214324
1012.1HSCA.03-20: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-6775
Bridge Clamp

270166775
83.97420.0500: RNCC: 2 | RNVC: 1

26 Feb 2003

5340-27-009-7880
Butt Hinge

270097880
1091MM0496: RNCC: 2 | RNVC: 1

7 Sep 2001

5340-27-035-9669
Bridge Clamp

270359669
1320794: RNCC: 2 | RNVC: 1

13 Apr 2007

5340-27-025-4544
Hook Handle

270254544
5000662499: RNCC: 2 | RNVC: 1

18 Mar 2005

5340-27-012-0744
Loop Clamp

270120744
97VT 5270 AA: RNCC: 2 | RNVC: 1
F33C3K745AA: RNCC: 2 | RNVC: 1
3757594: RNCC: 2 | RNVC: 1
90464-12089-00: RNCC: 2 | RNVC: 1

10 Jan 2002

5340-27-050-0553
Flush Catch

270500553
HD150360: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-027-1426
Mending Plate

270271426
MD134307: RNCC: 2 | RNVC: 1

8 Sep 2005

5340-27-036-0066
Mounting Bracket

270360066
12A14-37012-AA: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-004-7882
Access Cover

270047882
10091YK5074: RNCC: 3 | RNVC: 2

2 Nov 1996

5340-27-054-7232
Angle Bracket

270547232
98021844: RNCC: 3 | RNVC: 2

10 Oct 2011

5340-27-048-5787
Mending Plate

270485787
HD341238SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-058-1018
Mounting Bracket

270581018
1010FMA-1801801-6: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-014-6748
Angle Bracket

270146748
6040-0516-1004: RNCC: 2 | RNVC: 1
6040-0516-1004: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-043-3056
Mounting Bracket

270433056
7-004-018-22: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-014-6073
Mending Plate

270146073
20703183: RNCC: 2 | RNVC: 1
2900703: RNCC: 2 | RNVC: 1
20703183-2: RNCC: 2 | RNVC: 1

13 Nov 2002

5340-27-056-6625
Mounting Bracket

270566625
MM-7412-0057: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-044-6791
Mending Plate

270446791
81.25441-0559: RNCC: 2 | RNVC: 1

3 Mar 2009

5340-27-050-1581
Bridge Clamp

270501581
103090: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-052-4154
Lock Key

270524154
901-HT-28-18: RNCC: 2 | RNVC: 1

20 Jan 2011

5340-27-056-8649
Mending Plate

270568649
98001093-2: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-059-3046
Access Cover

270593046
98019105-20: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-032-6397
Mounting Bracket

270326397
T532-G4000-300: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-053-7974
Mounting Bracket

270537974
6040-1430-3002: RNCC: 2 | RNVC: 2

22 Jun 2011

5340-27-059-7620
Mounting Bracket

270597620
6040-0042-1020: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-004-5125
Access Cover

270045125
10121YK5297: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-005-1552
Bridge Clamp

270051552
1010000558: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-024-4950
Mounting Bracket

270244950
56138-25500: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-038-6314
Mending Plate

270386314
83A19-36922-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-055-7438
Flush Catch

270557438
6030-0537-4004: RNCC: 2 | RNVC: 2

2 Jan 2012

5340-27-023-9638
Angle Bracket

270239638
10121YT5538: RNCC: 2 | RNVC: 1
715F2888AC: RNCC: 2 | RNVC: 1

27 Aug 2004

5340-27-021-5354
Mending Plate

270215354
1010FK-0000370: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-2923
Mounting Bracket

270532923
H341158101: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-051-5856
Catch Strike

270515856
3C46E22147AB: RNCC: 2 | RNVC: 1

8 Nov 2010

5340-27-058-7575
Mounting Bracket

270587575
VOE12741343: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-038-2221
Mounting Bracket

270382221
3583874: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-005-5754
Roller Holder

270055754
AE040007: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-27-005-1776
Block Clamp

270051776
1010000403: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-042-7382
Mortise Lock

270427382
CEKMECE KILIDI,UCGEN TABANLI: RNCC: 2 | RNVC: 1
CEKMECE KILIDI,UCGEN: RNCC: 2 | RNVC: 1
KAPAK KILIDI: RNCC: 2 | RNVC: 1
CEKMECE KILIDI,UCGEN: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-054-6631
Mounting Bracket

270546631
55RS752926: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-052-2378
Mending Plate

270522378
10025114: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-27-058-9071
Access Cover

270589071
M532F635120800: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-020-7574
Mounting Bracket

270207574
1009.1KI.0090-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3688
Pad Eye

270173688
1009.1IS.0042-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-010-2813
Mounting Bracket

270102813
938766-1: RNCC: 2 | RNVC: 1
938766-1: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-051-2536
Strap Fastener Loop

270512536
KK0302735: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-051-2534
Strap Fastener Loop

270512534
KK0009166: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-035-0249
Strap Fastener Loop

270350249
1010005821: RNCC: 2 | RNVC: 1

22 Feb 2007

5340-27-011-0238
Strap Fastener Loop

270110238
7171230136: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-015-6487
Corner Brace

270156487
05001HK0073: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-044-7153
Turnbuckle

270447153
KEW01010-110: RNCC: 2 | RNVC: 1

6 Mar 2009

5340-27-009-3931
Corner Brace

270093931
10131YB0172: RNCC: 2 | RNVC: 1

27 Jun 2001

5340-27-013-3925
Bow Handle

270133925
7700750045: RNCC: 2 | RNVC: 1
7700750045: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-015-2014
Caster Wheel

270152014
10121HT0382: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-2833
Webbing Strap

270512833
KK0069180: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-018-6570
Access Cover

270186570
1010FK-1911346: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9225
Mounting Bracket

270069225
91AG 6A036 AE: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-021-2129
Mounting Bracket

270212129
1012.1HSCA.02-69: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-9379
Plug Button

270059379
E852082S: RNCC: 2 | RNVC: 1

6 Mar 1998

5340-27-052-8052
Mending Plate

270528052
82 17 731 61R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-021-4555
Mortise Lock Set

270214555
07002YK0312: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-4943
Crank Handle

270344943
81DBE23501AF: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-024-8005
Mounting Bracket

270248005
155209: RNCC: 2 | RNVC: 1

4 Dec 2004

5340-27-026-0144
Mounting Bracket

270260144
1604402287: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-048-9668
Mending Plate

270489668
103711: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-048-0946
Bow Handle

270480946
7703016463: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-052-7289
Mending Plate

270527289
10046611: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-013-3058
Mending Plate

270133058
46518074: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-054-4820
Mounting Bracket

270544820
114E62: RNCC: 3 | RNVC: 2

19 Sep 2011

5340-27-056-5551
Access Cover

270565551
3831910: RNCC: 2 | RNVC: 2

10 Apr 2012

5340-27-054-3117
Mending Plate

270543117
98020958: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-051-1815
Detent Plunger

270511815
109339: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-055-1283
Lock-Release Lever

270551283
H236120101: RNCC: 2 | RNVC: 1

14 Nov 2011

5340-27-049-4841
Mending Plate

270494841
107560-108: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-021-3495
Mounting Bracket

270213495
1009.1KI.0264-2*1-2.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1857
Retaining Clip

270071857
E 865445 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-029-9103
Mending Plate

270299103
130.4X50.8 MM: RNCC: 2 | RNVC: 1

6 Jun 2006

5340-27-008-8788
Expansion Plug

270088788
57RS300894: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-018-6958
Mounting Bracket

270186958
1010FK-2810508: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-9651
Mending Plate

270489651
103689: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-054-1756
Mending Plate

270541756
98021988: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-054-1748
Mending Plate

270541748
98019041: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-021-6061
Expansion Shield

270216061
SCD4001: RNCC: 2 | RNVC: 1

18 Dec 2003

5340-27-017-3881
Mounting Bracket

270173881
1009.1IS.0067-18: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-1728
Access Cover

270211728
1010FK-2702151: RNCC: 2 | RNVC: 1
1010FK-2702151: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-4995
Catch Strike

270474995
7701348165: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-27-017-1643
Handle Grip

270171643
58RS103567: RNCC: 2 | RNVC: 1

23 May 2003

5340-27-017-3751
Bow Handle

270173751
1009.1IS.0058-24: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-032-8648
Flush Catch Claw

270328648
05001FT190: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-041-4089
Utility Access Door

270414089
107.5X215 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-043-9175
Mending Plate

270439175
12B18-76285-AA: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-043-6410
Bumper

270436410
TAKOZ 35X20 MM: RNCC: 2 | RNVC: 1

27 Nov 2008

5340-27-052-7286
Mending Plate

270527286
10046601: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-047-8655
Mounting Bracket

270478655
13C25-16652-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-046-3960
Mending Plate

270463960
NRC6994-LD: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-055-2856
Mounting Bracket

270552856
C6032-CST-0002: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-27-040-2529
Mending Plate

270402529
8200178403: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-049-1651
Mounting Bracket

270491651
S01 001 0001 1650 014 F 02.H: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-026-0687
Mounting Bracket

270260687
1.HIBM-1Q-654: RNCC: 2 | RNVC: 1

30 May 2005

5340-27-036-1821
Pad Eye

270361821
F-70-8538: RNCC: 2 | RNVC: 1
F-70-8538: RNCC: 2 | RNVC: 1

9 May 2007

5340-27-007-1724
Retaining Clip

270071724
E 864697 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-057-2541
Mending Plate

270572541
KI046216-1: RNCC: 2 | RNVC: 1

11 Jul 2012

5340-27-018-6255
Mounting Bracket

270186255
1010FG-0101838: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-6829
Section Block Clamp

270406829
255-01-21: RNCC: 2 | RNVC: 1

25 Feb 2008

5340-27-025-6941
Mending Plate

270256941
A21B4-32300: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-049-0565
Mounting Bracket

270490565
1304-025: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-27-051-2474
Mounting Bracket

270512474
16F00-08610-AA: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-047-0292
Mending Plate

270470292
79A00-57473-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-018-6315
Strapping Seal

270186315
1010FG-0306106: RNCC: 2 | RNVC: 1
1010FG-0306106: RNCC: 2 | RNVC: 1
EFE-6315: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-039-1702
Mending Plate

270391702
83A24-73422-AA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-028-8196
Mounting Bracket

270288196
5340-KK-000-8772: RNCC: 2 | RNVC: 1
HSN07-002: RNCC: 2 | RNVC: 1

9 Feb 2006

5340-27-032-7707
Mending Plate

270327707
12E00-08894-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-011-2431
Butt Hinge

270112431
07002YM0303: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-2937
Door Closer

270212937
7335791356: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-0266
Loop Clamp

270590266
VOE980614: RNCC: 3 | RNVC: 2
VOE980614: RNCC: 3 | RNVC: 2

16 May 2013

5340-27-024-3069
Mending Plate

270243069
2K207010: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-042-9729
Mounting Bracket

270429729
7700273994: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-027-6047
Mounting Bracket

270276047
71A25-58017-AA: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-017-4871
Block Clamp

270174871
H-39-0532-50: RNCC: 2 | RNVC: 1

1 Jul 2003

5340-27-006-8352
Mounting Bracket

270068352
6030-1500-0002: RNCC: 2 | RNVC: 1
6030-1500-0002: RNCC: 2 | RNVC: 1

20 May 1999

5340-27-038-9540
Mending Plate

270389540
83A24-73278-AA: RNCC: 2 | RNVC: 1

6 Nov 2007

5340-27-058-7225
Bridge Clamp

270587225
13N00-03765-AA: RNCC: 2 | RNVC: 1

21 Mar 2013

5340-27-029-9156
Loop Clamp

270299156
5PS-14715-00-00: RNCC: 2 | RNVC: 1

6 Jun 2006

5340-27-010-4733
Angle Bracket

270104733
5999-0311-1022: RNCC: 2 | RNVC: 1
5999-0311-1022: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-059-6464
Loop Clamp

270596464
901-KL-330: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-060-0107
Mounting Bracket

270600107
MM-7490-0670: RNCC: 2 | RNVC: 1

24 Dec 2013

5340-27-005-6232
Angle Bracket

270056232
95VB-V203K00-AB: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-011-0537
Access Cover

270110537
1005-29785-00001: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-009-3682
Flush Catch

270093682
6040-0500-0060: RNCC: 2 | RNVC: 1
6040-0500-0060: RNCC: 2 | RNVC: 1

22 Jun 2001

5340-27-025-1942
Door Closer Dog

270251942
205-030-491-3: RNCC: 2 | RNVC: 1

27 Jan 2005

5340-27-017-1348
Case Leg

270171348
6009-0500-0008: RNCC: 2 | RNVC: 1

20 May 2003

5340-27-051-6652
Mending Plate

270516652
3EC-50-22510: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-053-7797
Filler Opening Cap

270537797
C172-600001: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-27-040-2820
Access Cover

270402820
Y535-75006-202: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-040-2847
Angle Bracket

270402847
Y535-75002-220: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-053-7527
Rod Retainer Clip

270537527
901-MS-15-13: RNCC: 2 | RNVC: 1

15 Jun 2011

5340-27-038-4768
Loop Clamp

270384768
T30565-600: RNCC: 2 | RNVC: 1
T30565-600: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-006-1902
Access Cover

270061902
NJH1287: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-001-7234
Loop Clamp

270017234
MODEL-55-PARTSCAN742-34: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-041-5688
Mending Plate

270415688
727271-000: RNCC: 2 | RNVC: 1

4 Jun 2008

5340-27-011-0664
Mounting Bracket

270110664
2540-39372-00002: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-002-9870
Loop Clamp

270029870
205-031-423-045: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-039-9437
Utility Access Door

270399437
9340-03700-00002: RNCC: 2 | RNVC: 1

28 Dec 2007

5340-27-048-7957
Butt Hinge

270487957
80110-01: RNCC: 2 | RNVC: 1
80110-01: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-040-2836
Angle Bracket

270402836
Y531-62012-204: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-032-4614
Angle Bracket

270324614
901-MD-127: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-059-7044
Loop Clamp

270597044
901-KL-412: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-025-6492
Mounting Bracket

270256492
212-1108056-B: RNCC: 2 | RNVC: 1

25 Mar 2005

5340-27-052-6934
Loop Clamp

270526934
DIN3016-1-D1-18-15-W3-CR: RNCC: 2 | RNVC: 2

16 Feb 2011

5340-27-053-3419
Rod End Clevis

270533419
901-CH-116: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-009-5157
Roller Holder

270095157
A5-67: RNCC: 2 | RNVC: 1

19 Jul 2001

5340-27-018-6913
Mounting Bracket

270186913
1010FK-1808635: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-3173
Mending Plate

270183173
10121YT5487: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-1537
Mounting Bracket

270381537
1010FK-2702061-1: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-013-2180
Loop Clamp

270132180
EM BKT 40 MM: RNCC: 2 | RNVC: 1
5340-77777-00009: RNCC: 2 | RNVC: 1
90464-18002-00: RNCC: 2 | RNVC: 1

16 May 2002

5340-27-021-0733
Access Cover

270210733
TR-0106: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-5765
Platen Holder

270055765
AE020046: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-27-058-2722
Mending Plate

270582722
MM-7490-0053: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-055-3233
Mounting Bracket

270553233
1692-0057: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-022-3947
Catch Strike

270223947
9BM 5340-00068: RNCC: 2 | RNVC: 1

5 Mar 2004

5340-27-035-0397
Mounting Bracket

270350397
901-TD-280: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-032-2860
Mortise Lock Set

270322860
2540ATF0092: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-025-9731
Loop Clamp

270259731
5003016532: RNCC: 2 | RNVC: 1

12 May 2005

5340-27-019-9274
Masking Plate

270199274
08001PA0343I: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-2062
Mending Plate

270542062
98019124: RNCC: 2 | RNVC: 2

8 Aug 2011

5340-27-009-3954
Mounting Bracket

270093954
10131YA0161: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-025-3306
Access Cover

270253306
2530-ATF-0130: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-055-4147
Mounting Bracket

270554147
5080550: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-019-6211
Expansion Shield

270196211
PLASTIK,10MM: RNCC: 2 | RNVC: 1
05001HD0258: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-4847
Butt Hinge

270184847
50041YM0030: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-6718
Angle Bracket Set

270046718
1.HIBM-1I-1518 D01: RNCC: 2 | RNVC: 1

15 Aug 1996

5340-27-023-2273
Flush Catch

270232273
26952T: RNCC: 2 | RNVC: 1

8 Jun 2004

5340-27-054-4656
Access Cover

270544656
T530-H3001-110: RNCC: 2 | RNVC: 1

14 Sep 2011

5340-27-013-1243
Angle Bracket

270131243
6040-0536-4004: RNCC: 2 | RNVC: 1
6040-0536-4004: RNCC: 2 | RNVC: 1

30 Apr 2002

5340-27-057-7849
Butt Hinge

270577849
1010FMA-0000882: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-027-4361
Mending Plate

270274361
0000-GK-003-5540: RNCC: 2 | RNVC: 1

4 Oct 2005

5340-27-035-5950
Mending Plate

270355950
72B04-61400-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-005-4534
Rod End Clevis

270054534
37H-6438: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-050-3244
Mending Plate

270503244
5986-0034-9000: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-27-004-5525
Loop Clamp

270045525
10091YK5037: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-051-1085
Mending Plate

270511085
104371: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-044-8901
Mounting Bracket

270448901
3316749: RNCC: 2 | RNVC: 1

18 Mar 2009

5340-27-058-7567
Mounting Bracket

270587567
55RS752649: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-036-6788
Mending Plate

270366788
387002379101: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-042-7409
Mounting Bracket

270427409
2ABEP00816: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-005-6233
Angle Bracket

270056233
95VB-V203K01-AB: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-007-1694
Retaining Clip

270071694
E 860386 S102: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-034-5038
Mounting Bracket

270345038
81DBE60094BC: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-015-0385
Loop Clamp

270150385
7392319: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0554
Loop Clamp

270150554
7057332-1: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-4096
Mounting Bracket

270214096
1009.1KI.0264-2*2-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-3924
Bow Handle

270133924
7700659426: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-055-3383
Mounting Bracket

270553383
1692-0034: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-034-4965
Bow Handle

270344965
82DBE26690AAW: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-055-5721
Utility Access Door

270555721
540X150 CM: RNCC: 3 | RNVC: 1

12 Dec 2011

5340-27-027-4709
Catch Strike

270274709
12A14-55016-AA: RNCC: 2 | RNVC: 1

5 Oct 2005

5340-27-020-2151
Tee Hinge

270202151
FET0MU0000010103: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-047-1196
Handle Grip

270471196
12B87-2442-AA: RNCC: 2 | RNVC: 1

5 Nov 2009

5340-27-059-0601
Expansion Plug

270590601
04226536: RNCC: 2 | RNVC: 1

21 May 2013

5340-27-021-1038
Access Cover

270211038
1010FK-3512753: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-6862
Mending Plate

270486862
45 04 00019: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-053-1040
Mending Plate

270531040
103720: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-051-3232
Mounting Bracket

270513232
55RS860156: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-040-6167
Access Cover

270406167
269046050100: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-055-9115
Mounting Bracket

270559115
102167: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-019-6250
Butt Hinge

270196250
05001HM0080: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-7596
Flush Catch

270497596
KP90001AA: RNCC: 3 | RNVC: 2

27 May 2010

5340-27-020-8881
Beam Gripping Clamp

270208881
07002YK0380: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-3670
Mounting Bracket

270533670
H341122700: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-023-1170
Mounting Bracket

270231170
2ABM 1MK 0024: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-037-0345
Mounting Bracket

270370345
C56B34: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-010-0433
Bridge Clamp

270100433
81.43410.0304: RNCC: 2 | RNVC: 1

25 Oct 2001

5340-27-054-9333
Bumper

270549333
102017: RNCC: 2 | RNVC: 1

24 Oct 2011

5340-27-024-8193
Drift Bolt

270248193
05001FS0174: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-041-3760
Mending Plate

270413760
7253482: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-013-7335
Catch Strike

270137335
8724 71: RNCC: 2 | RNVC: 1

17 Jul 2002

5340-27-042-9936
Mounting Bracket

270429936
40.624.0101: RNCC: 2 | RNVC: 1
40.624.0101: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-040-2548
Mending Plate

270402548
8200214398: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-048-9611
Mending Plate

270489611
102825: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-050-2789
Bridge Clamp

270502789
A2024900941: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-27-056-8643
Mending Plate

270568643
98000557-5: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-007-4111
Mounting Bracket

270074111
95AG 7K740 AC: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-045-9309
Loop Clamp

270459309
8AT6100035: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-004-5130
Access Cover

270045130
10121YK5358: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-048-9867
Mending Plate

270489867
105448: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-050-3878
Mending Plate

270503878
105570: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-038-7353
Crank Handle

270387353
10091MT0132: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-052-1726
Bow Handle

270521726
A2108100754: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-27-014-3692
Catch Strike

270143692
2T14 K62452 AD: RNCC: 2 | RNVC: 1

9 Oct 2002

5340-27-042-7851
Hinged Hasp

270427851
2ABEP00909: RNCC: 2 | RNVC: 1

11 Sep 2008

5340-27-018-3171
Bail Handle

270183171
10121YT5485: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-4968
Bow Handle

270344968
82DBE26691AAW: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-050-7623
Mending Plate

270507623
16C20-33021-AB: RNCC: 2 | RNVC: 1

25 Aug 2010

5340-27-012-1518
Mending Plate

270121518
10131YS0913: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-008-4573
Rod End Clevis

270084573
4688942: RNCC: 2 | RNVC: 1

12 Oct 2000

5340-27-053-9657
Mounting Bracket

270539657
55RS551817: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-049-2120
Mending Plate

270492120
107191: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-042-5974
Mounting Bracket

270425974
2ABEP00815: RNCC: 2 | RNVC: 1

29 Aug 2008

5340-27-058-5618
Mending Plate

270585618
98022817: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-007-9819
Kick Door Plate

270079819
6956: RNCC: 2 | RNVC: 1

11 May 2000

5340-27-018-9478
Mounting Bracket

270189478
6593250119: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-6676
Mounting Bracket

270176676
388887045001: RNCC: 2 | RNVC: 1

15 Aug 2003

5340-27-036-2375
Sliding Door Track

270362375
3C46E513A30BB: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-039-7705
Sliding Door Track

270397705
893298413051: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-025-0912
Mounting Bracket

270250912
19474T: RNCC: 2 | RNVC: 1

3 Jan 2005

5340-27-007-1974
Retaining Clip

270071974
W 700746 S300: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-017-3884
Mounting Bracket

270173884
1009.1IS.0068-B/11: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3811
Access Cover

270173811
1009.1IS.0059-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-0352
Mounting Bracket

270210352
1009.1KI.0308-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1730
Retaining Clip

270071730
E 865420 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-045-9196
Mounting Bracket

270459196
1.HIBM-1Q-835: RNCC: 2 | RNVC: 1

22 Jun 2009

5340-27-025-6731
Lock Key

270256731
NAS559-5: RNCC: 2 | RNVC: 1

28 Mar 2005

5340-27-051-4200
Bow Handle

270514200
102957: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-009-0307
Mounting Bracket

270090307
98000501: RNCC: 2 | RNVC: 1

5 Apr 2001

5340-27-037-0337
Mounting Bracket

270370337
C56B29: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-042-5789
Access Cover

270425789
54545694: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-013-2173
Flush Catch Claw

270132173
1010003203: RNCC: 2 | RNVC: 1
K-2173: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-026-1668
Loop Holder

270261668
1010FK-1802007: RNCC: 2 | RNVC: 1

13 Jun 2005

5340-27-021-4081
Mounting Bracket

270214081
1009.1KI.0295-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1726
Retaining Clip

270071726
E 864840 S81: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-019-6317
Webbing Strap

270196317
05001HK0374: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-3238
Access Cover

270043238
05001YK0160: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-018-3438
Control Rod

270183438
820989-2: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-5335
Mending Plate

270275335
85.41740.0003: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-033-9095
Mounting Bracket

270339095
2ABEP00020: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-055-9106
Mounting Bracket

270559106
102171: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-043-1977
Mounting Bracket

270431977
7-006-004: RNCC: 1 | RNVC: 2

20 Oct 2008

5340-27-034-5173
Sliding Door Track

270345173
58RS111968: RNCC: 2 | RNVC: 1

16 Jan 2007

5340-27-043-9361
Eye Hook

270439361
EMNIYET KANCASI,CELIK: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-048-4072
Bow Handle

270484072
300023: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-27-051-1093
Mending Plate

270511093
108617: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-015-7293
Butt Hinge

270157293
16001DM0068: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8494
Loop Clamp

270158494
1010004870: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-020-7538
Mounting Bracket

270207538
1009.1KI.0171-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3753
Hook Handle

270173753
1009.1IS.0097-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-006-8886
Mounting Bracket

270068886
A 435 426 44 40: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-053-9994
Catch Strike

270539994
73A09-55360-AA: RNCC: 2 | RNVC: 1

14 Jul 2011

5340-27-020-6661
Loop Clamp

270206661
1010FG-1831169: RNCC: 2 | RNVC: 1
83A00-38247-AA: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-3357
Mounting Bracket

270443357
12E01-58059-AA: RNCC: 2 | RNVC: 1

28 Jan 2009

5340-27-036-8228
Butt Hinge Leaf

270368228
40.660.7420: RNCC: 2 | RNVC: 1
40.660.7420: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-026-6057
Sliding Door Track

270266057
10131YB2047: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-045-7672
Mounting Bracket

270457672
10029171: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-020-7571
Mounting Bracket

270207571
1009.1KI.0283-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-5784
Mending Plate

270485784
HD341220SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-051-6710
Mending Plate

270516710
3EB-64-11550: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-020-7058
Friction Catch Stud

270207058
7700507608: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7894
Mending Plate

270287894
35004263: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-046-6429
Access Cover

270466429
3MV86431-0001: RNCC: 2 | RNVC: 2

17 Sep 2009

5340-27-047-4915
Mounting Bracket

270474915
13C22-07029-AA: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-27-053-3445
Mounting Bracket

270533445
131-00029: RNCC: 2 | RNVC: 2

20 Apr 2011

5340-27-026-5702
Catch Strike

270265702
64621-12070: RNCC: 2 | RNVC: 1

13 Jul 2005

5340-27-041-7958
Mounting Bracket

270417958
1-003-001: RNCC: 1 | RNVC: 2

18 Jun 2008

5340-27-007-3545
Retaining Clip

270073545
W 701208 S407: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-059-5590
Angle Bracket

270595590
901-DS-125: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-043-2870
Mounting Bracket

270432870
74A05-62190-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-042-9026
Bow Handle

270429026
BAL-283: RNCC: 2 | RNVC: 1

17 Sep 2008

5340-27-029-7317
Elbow Catch

270297317
KK11011FF028: RNCC: 5 | RNVC: 9

5 May 2006

5340-27-056-8776
Mounting Bracket

270568776
203136: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-055-7317
Expansion Plug

270557317
5162458: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-013-5920
Mounting Bracket

270135920
11 620710: RNCC: 2 | RNVC: 1

1 Jul 2002

5340-27-044-4076
Synchro Clamp

270444076
81.97640-0284: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-027-9665
Mending Plate

270279665
1010FG-0608091: RNCC: 2 | RNVC: 1
1010FG-0608091: RNCC: 5 | RNVC: 9

21 Nov 2005

5340-27-040-6494
Angle Bracket

270406494
TOFF-300: RNCC: 2 | RNVC: 1

15 Feb 2008

5340-27-058-3156
Mending Plate

270583156
0490 6773: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-047-3842
Mounting Bracket

270473842
2.HIBM-2L-655: RNCC: 2 | RNVC: 1

26 Nov 2009

5340-27-033-6541
Mechanical Stop

270336541
40-205-4355: RNCC: 2 | RNVC: 1
40-205-4355: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-024-4633
Mending Plate

270244633
57124-3B200: RNCC: 2 | RNVC: 1

2 Nov 2004

5340-27-028-4336
Bail Handle

270284336
KEDM - 133: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-051-2800
Bow Handle

270512800
520/30800: RNCC: 2 | RNVC: 2
520/30800: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-028-4668
Mending Plate

270284668
72A25-35401-AA: RNCC: 2 | RNVC: 1

3 Jan 2006

5340-27-046-6793
Mounting Bracket

270466793
Y532-67003-202: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-040-2860
Angle Bracket

270402860
Y532-66015-203: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-058-3793
Access Cover

270583793
37113-10800: RNCC: 5 | RNVC: 9

18 Jan 2013

5340-27-039-7133
Dashpot Piston

270397133
SA 1162-04930: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-059-6630
Loop Clamp

270596630
901-KL-371: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-053-3944
Loop Clamp

270533944
N07/4010016: RNCC: 2 | RNVC: 1
N07/4010016: RNCC: 5 | RNVC: 9

28 Apr 2011

5340-27-025-2438
Access Cover

270252438
MM-7550-0610: RNCC: 2 | RNVC: 1

8 Feb 2005

5340-27-019-1306
Mounting Bracket

270191306
8V0-47331-01: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-1736
Retaining Clip

270071736
E 865478 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-022-8992
Mounting Bracket

270228992
EIBM-AA4-900-I-12: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-053-2975
Butt Hinge Leaf

270532975
3MV86582-0201: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-058-0207
Mending Plate

270580207
203485: RNCC: 2 | RNVC: 1

30 Nov 2012

5340-27-034-6122
Mounting Bracket

270346122
214F33: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-014-0372
Bridge Clamp

270140372
2T14 5B484 AA: RNCC: 2 | RNVC: 1

3 Sep 2002

5340-27-050-4831
Swivel Caster

270504831
EYM-1: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-27-050-0725
Mending Plate

270500725
108264: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-049-9676
Mending Plate

270499676
HD121126: RNCC: 2 | RNVC: 2
HD121126: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-021-2136
Mounting Bracket

270212136
1012.1HSCA.03-02: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-2725
Mending Plate

270582725
MM-7490-0056: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-038-9819
Angle Bracket

270389819
901-TS-314A: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-021-4068
Mounting Bracket

270214068
1009.1KI.0321-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6639
Loop Clamp

270596639
901-KL-389: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-048-2836
Mounting Bracket

270482836
45-3311-0698: RNCC: 2 | RNVC: 1

26 Jan 2010

Load More Results