What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 48 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 48 of 53

5340-27-004-5151
Mounting Bracket

270045151
10121YK5205: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-038-9763
Manual Control Lever

270389763
90TKVJA2001: RNCC: 2 | RNVC: 1

6 Nov 2007

5340-27-048-5782
Dust And Moisture Seal Protective Cover

270485782
HD341133Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-027-3981
Utility Resilient Mount

270273981
MB109674: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-046-6698
Takma-Sokme Aparat

270466698
205-082: RNCC: 2 | RNVC: 1

25 Sep 2009

5340-27-009-7260
Dust And Moisture Seal Protective Plug

270097260
7513 42: RNCC: 2 | RNVC: 1
695005: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-035-9021
Mesnet

270359021
366.07186-1: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-020-3720
Topuz

270203720
7700767656: RNCC: 2 | RNVC: 1

4 Dec 2003

5340-27-024-2903
Dust And Moisture Seal Protective Plug

270242903
43171-34002: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-005-6410
Mounting Bracket

270056410
92VT-B52103-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-054-1825
Sac Mahfaza

270541825
40-006.00/10-127-2005: RNCC: 2 | RNVC: 1

4 Aug 2011

5340-27-052-6978
Govde

270526978
202130-09-0: RNCC: 2 | RNVC: 1

16 Feb 2011

5340-27-028-6472
Takim Acmak I Aski

270286472
72A08-35303-AA: RNCC: 2 | RNVC: 1

26 Jan 2006

5340-27-039-4928
Baglanti Parcasi

270394928
KLP-1: RNCC: 2 | RNVC: 1

4 Dec 2007

5340-27-057-8376
Takma-Sokme Aparat

270578376
T-3T01MT200474M2: RNCC: 2 | RNVC: 1

6 Nov 2012

5340-27-034-0847
Utility Resilient Mount

270340847
897035623051: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-012-1554
Retaining Clip

270121554
85GB 9P733 AA: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-055-0596
Headless Straight Rod

270550596
6000022736: RNCC: 2 | RNVC: 2

1 Nov 2011

5340-27-036-3705
Dust And Moisture Seal Protective Plug

270363705
82315917: RNCC: 2 | RNVC: 1

28 May 2007

5340-27-014-6354
Mounting Plate

270146354
901-TD-191: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-050-8405
Manual Control Lever

270508405
6H4-43160-01: RNCC: 3 | RNVC: 2
6H4-43160-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-027-9429
Dust And Moisture Seal Protective Cover

270279429
6009-0532-8034: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-024-6438
Utility Resilient Mount

270246438
71A25-03537-AB: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-022-8307
Ar Tesisat Tutucu

270228307
05001FT0044: RNCC: 2 | RNVC: 1

23 Apr 2004

5340-27-022-0406
Birlestirme Parcasi

270220406
9BM 5340-00019: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-017-4027
Mounting Plate

270174027
1009.1IS.0067-6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-9836
Makara

270249836
6453700011: RNCC: 2 | RNVC: 1

23 Dec 2004

5340-27-009-3536
Adaptor Tutucu

270093536
6040-0524-1006: RNCC: 2 | RNVC: 1
6040-0524-1006: RNCC: 2 | RNVC: 1

20 Jun 2001

5340-27-011-8210
Dust And Moisture Seal Protective Cap

270118210
8C167-2: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-032-3307
Mounting Plate

270323307
2ABM1AMB0021/5: RNCC: 2 | RNVC: 1

21 Jun 2006

5340-27-042-6949
Adaptor

270426949
05001FA0107: RNCC: 2 | RNVC: 1
05001FA0107: RNCC: 5 | RNVC: 9

5 Sep 2008

5340-27-036-0597
Dust And Moisture Seal Protective Cover

270360597
13C02-05071-AA: RNCC: 2 | RNVC: 1

25 Apr 2007

5340-27-006-5339
Esnek Rekor

270065339
81-96210-0101: RNCC: 2 | RNVC: 1
819662100101: RNCC: 5 | RNVC: 2

16 Sep 1998

5340-27-004-5567
Montaj Ara Parcasi

270045567
10091YA5022: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-021-2712
Clamping Catch Fastener

270212712
8M6-77171-00: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-2900
Mounting Plate

270562900
6030-0516-4011: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-27-013-4373
Retaining Clip

270134373
46778890: RNCC: 2 | RNVC: 1

17 Jun 2002

5340-27-027-3975
Utility Resilient Mount

270273975
MB316237: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-045-2612
Buckle

270452612
MN188369XA: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-27-050-3925
Mesnet

270503925
273.17: RNCC: 2 | RNVC: 1

22 Jul 2010

5340-27-001-7520
Mounting Bracket

270017520
TM55-1520-210-3178053-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-043-0447
Mounting Plate

270430447
6040-0522-6001: RNCC: 2 | RNVC: 1

6 Oct 2008

5340-27-053-3036
Rob Manifold Yuvasi

270533036
740.06.10-02.052: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-27-050-7706
Dust And Moisture Seal Protective Plug

270507706
72A12-70521-AA: RNCC: 2 | RNVC: 1

26 Aug 2010

5340-27-018-6371
Cushioning Pad

270186371
1010FG-0306167-6: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-010-1595
Surgulu Destek

270101595
DZJA000141: RNCC: 2 | RNVC: 1

9 Nov 2001

5340-27-025-7795
Mounting Plate

270257795
2ABM 1IMZA 0001/26: RNCC: 2 | RNVC: 1

8 Apr 2005

5340-27-049-4836
Retaining Strap

270494836
107557-2: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-021-1300
Utility Resilient Mount

270211300
1009.1KI.0090-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3726
Dust And Moisture Seal Protective Cap-Plug

270213726
A 186724: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8126
Mounting Plate

270278126
1501502040: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-028-7284
Dust And Moisture Seal Protective Cover

270287284
MB424125: RNCC: 2 | RNVC: 1

1 Feb 2006

5340-27-028-1217
Permanent Magnet

270281217
5999ATF0006: RNCC: 2 | RNVC: 1

5 Dec 2005

5340-27-045-5697
Dust And Moisture Seal Protective Cap

270455697
CF 425 021: RNCC: 2 | RNVC: 1

15 May 2009

5340-27-024-8975
Manual Control Handle

270248975
901-M-90-12: RNCC: 2 | RNVC: 1
901-MA-89-12: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-028-6629
Takim Acmak I Aski

270286629
72B18-35322-AA: RNCC: 2 | RNVC: 1

27 Jan 2006

5340-27-017-7047
Spacing Threaded Standoff

270177047
H-39-0517-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-058-2917
Tasima Kol

270582917
103724: RNCC: 2 | RNVC: 1

3 Jan 2013

5340-27-047-1640
Baglama Ayagi

270471640
901-ZP-6-1: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-029-8182
Retaining Clip

270298182
1KT-12437-00-00-: RNCC: 2 | RNVC: 1

25 May 2006

5340-27-047-1231
Baglama Ayagi

270471231
901-ZP-4-1: RNCC: 2 | RNVC: 1

6 Nov 2009

5340-27-022-1962
Birlestirme Parcasi

270221962
9BM 5340-00040: RNCC: 2 | RNVC: 1

18 Feb 2004

5340-27-058-7376
Hand Carrying Strap Assembly

270587376
5340-TJ1-10387: RNCC: 2 | RNVC: 1

26 Mar 2013

5340-27-059-7875
Mounting Plate

270597875
SGB-DKP-M-4-0009: RNCC: 2 | RNVC: 1

6 Nov 2013

5340-27-016-7751
Utility Resilient Mount

270167751
2900110: RNCC: 2 | RNVC: 1
2940110: RNCC: 2 | RNVC: 1
023-0404400: RNCC: 2 | RNVC: 1
2900110: RNCC: 5 | RNVC: 2

12 Mar 2003

5340-27-007-9416
Dust And Moisture Seal Protective Cap

270079416
2B75477: RNCC: 2 | RNVC: 1

27 Apr 2000

5340-27-059-1717
Govde

270591717
3500501016: RNCC: 5 | RNVC: 9

11 Jun 2013

5340-27-049-7898
Baglanti Parcasi

270497898
8811800040: RNCC: 2 | RNVC: 1

31 May 2010

5340-27-037-6478
Retaining Strap

270376478
1060X15X2.70: RNCC: 2 | RNVC: 1

15 Aug 2007

5340-27-032-4479
Yuksuk

270324479
83A11-80858-AA: RNCC: 2 | RNVC: 1

13 Jul 2006

5340-27-019-0349
Dust And Moisture Seal Protective Cap Set

270190349
M0102-F05: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-8247
Dust And Moisture Seal Protective Plug

270118247
318-24: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-026-5492
Retaining Clip

270265492
90466-35001: RNCC: 2 | RNVC: 1

12 Jul 2005

5340-27-020-3992
Surgulu Kilit

270203992
M11-10GN: RNCC: 2 | RNVC: 1
M11-10GN: RNCC: 2 | RNVC: 1

5 Dec 2003

5340-27-048-2356
Tutucu Parca

270482356
269.3: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-021-7615
Retaining Strap

270217615
18356T: RNCC: 2 | RNVC: 1
212-1108058: RNCC: 2 | RNVC: 1

13 May 2004

5340-27-060-0591
Retaining Clip

270600591
MM-7490-0370: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-003-8264
Electronic Equipment Hardware Kit

270038264
6040-0516-4009: RNCC: 2 | RNVC: 1
6040-0516-4009: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-022-8744
Dust And Moisture Seal Protective Plug

270228744
96392-2105: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-050-5515
Utility Resilient Mount

270505515
105245: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-27-036-1446
Antipilferage Seal

270361446
2ABEP00175: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-015-6976
Mounting Plate

270156976
10091KI0338: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7385
Protection Bellows

270207385
810/28550: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-0383
Birlestirme Parcasi

270220383
9BM 5340-00018: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-047-0271
Dust And Moisture Seal Protective Cover

270470271
73B00-66503-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-053-8565
Baglama Ayagi

270538565
AK-7060500: RNCC: 2 | RNVC: 2

29 Jun 2011

5340-27-007-9526
Mounting Plate

270079526
6030-0510-1001: RNCC: 2 | RNVC: 1
6030-0510-1001: RNCC: 2 | RNVC: 1

4 May 2000

5340-27-008-9699
Kaucuk Tampon

270089699
46479089: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-032-3371
Dust And Moisture Seal Protective Cover

270323371
83A00-59107-AA: RNCC: 2 | RNVC: 1

22 Jun 2006

5340-27-023-2185
Retaining Clip

270232185
15492-5031: RNCC: 2 | RNVC: 1

8 Jun 2004

5340-27-028-0761
Retaining Clip

270280761
46406331: RNCC: 2 | RNVC: 1

29 Nov 2005

5340-27-014-3618
Dust And Moisture Seal Protective Cap-Plug

270143618
2T14 600C76 AAW: RNCC: 2 | RNVC: 1
26395T: RNCC: 2 | RNVC: 1

9 Oct 2002

5340-27-017-5567
Dust And Moisture Seal Protective Plug

270175567
40.9080.37: RNCC: 2 | RNVC: 1
10.9080.37: RNCC: 2 | RNVC: 1

22 Jul 2003

5340-27-046-9856
Kutu Numarator

270469856
6 HANELI (0-999999): RNCC: 2 | RNVC: 1

26 Oct 2009

5340-27-054-5514
Dust And Moisture Seal Protective Cap-Plug

270545514
965053-1: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-044-4892
Cam Fitil

270444892
8B822678: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-046-6376
Tutucu

270466376
115X100X25: RNCC: 2 | RNVC: 1

16 Sep 2009

5340-27-044-6926
Dust And Moisture Seal Protective Plug

270446926
81.96002-0493: RNCC: 2 | RNVC: 1

4 Mar 2009

5340-27-057-8901
Takma-Sokme Aparat

270578901
TD120808/3: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-058-1699
Kalorifer Kazani Ka

270581699
YK0002: RNCC: 2 | RNVC: 1

18 Dec 2012

5340-27-017-7651
Pim Mentese

270177651
14MM MENTESE,MIL: RNCC: 2 | RNVC: 1
14MM MENTESE,MIL: RNCC: 5 | RNVC: 2

29 Aug 2003

5340-27-053-8445
Cushioning Pad

270538445
C174-610021: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-048-2178
Utility Resilient Mount

270482178
58RS501282: RNCC: 2 | RNVC: 1

20 Jan 2010

5340-27-058-1942
Dust And Moisture Seal Protective Cap

270581942
37561-22901: RNCC: 5 | RNVC: 9

20 Dec 2012

5340-27-057-8898
Takma-Sokme Aparat

270578898
TD120808/1: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-050-0955
Dust And Moisture Seal Protective Plug

270500955
929527-76: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-27-050-8171
Mounting Plate

270508171
63D-44526-00: RNCC: 3 | RNVC: 2
63D-44526-00: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-27-021-3117
Dust And Moisture Seal Protective Cover

270213117
1206-KMT-0192: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-2717
Dust And Moisture Seal Protective Plug

270442717
81.96002-0473: RNCC: 2 | RNVC: 1

21 Jan 2009

5340-27-039-5523
Retaining Clamp Assembly

270395523
941976: RNCC: 2 | RNVC: 1

7 Dec 2007

5340-27-015-6919
Mounting Plate

270156919
10091KI0077: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-8735
Manual Control Lever

270068735
062000402: RNCC: 2 | RNVC: 1

2 Jun 1999

5340-27-025-3957
Utility Resilient Mount

270253957
L01A30: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-049-6255
Spacing Threaded Standoff

270496255
901-TI-330-24: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-003-8238
Electronic Equipment Hardware Kit

270038238
3522-1140-8300: RNCC: 2 | RNVC: 1
3522-1140-8300: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-057-3612
Montaj Ayak

270573612
2.HIBM-4H-0666/1/V-A19-1-0002: RNCC: 2 | RNVC: 1

25 Jul 2012

5340-27-059-8720
Door Handle

270598720
305 S: RNCC: 2 | RNVC: 1

26 Nov 2013

5340-27-029-0608
Dust And Moisture Seal Protective Cover

270290608
46404994: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-026-2129
Kapak

270262129
72A48-36174-AA: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-037-1026
Air Inlet-Outlet Frame

270371026
BAA-300X200 MM: RNCC: 2 | RNVC: 1

13 Jul 2007

5340-27-050-1986
Gerdirme Kayis

270501986
79C00-35164-AA: RNCC: 2 | RNVC: 1

6 Jul 2010

5340-27-001-2835
Mounting Bracket

270012835
CESSNA-185 PART0713931-1: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-016-3300
Spring Tension Clip

270163300
7703078108: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-057-1746
Ampul Besleyic Lama

270571746
ABL-1: RNCC: 3 | RNVC: 1
ABL-2: RNCC: 3 | RNVC: 1

28 Jun 2012

5340-27-058-3836
Dust And Moisture Seal Protective Cover

270583836
37739-20300: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-038-2837
Retaining Strap

270382837
24019-31K01: RNCC: 5 | RNVC: 9

26 Sep 2007

5340-27-040-7111
Utility Resilient Mount

270407111
PLK17: RNCC: 2 | RNVC: 1

5 Mar 2008

5340-27-049-7559
Dust And Moisture Seal Protective Cover

270497559
A9906841: RNCC: 2 | RNVC: 1

26 May 2010

5340-27-038-7735
Retaining Clip

270387735
8200291313: RNCC: 2 | RNVC: 1

31 Oct 2007

5340-27-053-0127
Runner

270530127
102-F247/1554-001-000: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-033-8440
Headless Straight Rod

270338440
KARAC-0003: RNCC: 2 | RNVC: 1

22 Nov 2006

5340-27-053-7587
Flange Protector

270537587
901-MS-15-18: RNCC: 2 | RNVC: 1

16 Jun 2011

5340-27-040-1156
Metal Olmayan Takoz

270401156
897244819051: RNCC: 2 | RNVC: 1

8 Jan 2008

5340-27-042-3910
Kilit

270423910
500200: RNCC: 2 | RNVC: 1

13 Aug 2008

5340-27-057-0104
Montaj Ayak

270570104
2.HIBM-4H-0666/4/L-0018: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-27-050-8416
Manual Control Lever

270508416
6J8-43186-00: RNCC: 3 | RNVC: 2
6J8-43186-00: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-023-3899
Dust And Moisture Seal Protective Cover

270233899
4.03.07.08: RNCC: 2 | RNVC: 1
KHS63-8: RNCC: 2 | RNVC: 1
KHS63-8: RNCC: 5 | RNVC: 9

25 Jun 2004

5340-27-022-1566
Mounting Plate

270221566
1009 1AD 0011-4: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-040-4329
Kapak

270404329
42042-701: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-053-5182
Kapak

270535182
303537: RNCC: 2 | RNVC: 1

13 May 2011

5340-27-043-0916
Plaka

270430916
2ABEP00942: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-027-2594
Retaining Clip

270272594
15-01-402-005: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-017-6841
Zamak

270176841
ZAM-PEC: RNCC: 2 | RNVC: 1

19 Aug 2003

5340-27-049-2401
Ara Parcasi

270492401
1000151-214-070: RNCC: 2 | RNVC: 1

14 Apr 2010

5340-27-020-8732
Access Door Hinge

270208732
1010FK-0000341: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-0413
Mounting Plate

270220413
1009 1IS 0068A-10: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-040-9861
Dust And Moisture Seal Protective Plug

270409861
MK405139: RNCC: 2 | RNVC: 1

16 Apr 2008

5340-27-032-6857
Doner Govd Tekerlek

270326857
5102-DYR-200-F09: RNCC: 5 | RNVC: 9

8 Sep 2006

5340-27-044-8442
Tespit Kayis

270448442
02008-TRS-10-0000-06: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-27-024-5012
Retaining Clip

270245012
87263-25000: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-006-8405
Manual Control Lever

270068405
062000212: RNCC: 2 | RNVC: 1

24 May 1999

5340-27-016-7272
Retaining Clip

270167272
46443163: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-048-5561
Utility Resilient Mount

270485561
HD241137Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-058-9346
Dust And Moisture Seal Protective Plug

270589346
CH62501: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-051-6200
Mounting Plate

270516200
40077-3: RNCC: 2 | RNVC: 1

10 Nov 2010

5340-27-021-4741
Protection Bellows

270214741
P-18: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-0739
Lastik Takoz

270570739
2.HIBM-4H-0666/4/F-0001: RNCC: 2 | RNVC: 1

15 Jun 2012

5340-27-058-5895
Tapa

270585895
901-KA-271-26: RNCC: 2 | RNVC: 1

25 Feb 2013

5340-27-039-1664
Dust And Moisture Seal Protective Cover

270391664
83A24-73450-AA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-049-6243
Sikistirma Aparati

270496243
102-F490-8216-009-000-0: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-023-1355
Dust And Moisture Seal Protective Cover

270231355
23781T: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-055-3279
Utility Resilient Mount

270553279
84306131: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-043-9517
Antipilferage Seal

270439517
4910ATFD0300: RNCC: 5 | RNVC: 9

23 Dec 2008

5340-27-040-4335
Mounting Plate

270404335
12326077: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-029-6606
Cushioning Pad

270296606
5PS-24724-10-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-037-3568
Dust And Moisture Seal Protective Cover

270373568
83A00-55513-AA: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-021-2853
Utility Resilient Mount

270212853
1009.1KI.0281-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-010-1667
Mounting Plate

270101667
514903-1: RNCC: 2 | RNVC: 1
514903-1: RNCC: 2 | RNVC: 1

9 Nov 2001

5340-27-010-0003
Retaining Bail

270100003
336548-2: RNCC: 2 | RNVC: 1
336548-2: RNCC: 2 | RNVC: 1

19 Oct 2001

5340-27-023-2593
Sac Mahfaza

270232593
1934150100: RNCC: 2 | RNVC: 1
4.05.17.02: RNCC: 2 | RNVC: 1

12 Jun 2004

5340-27-028-7758
Retaining Clamp Assembly

270287758
7K11150: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-009-6997
Metal Olmay Tampon

270096997
9181 C6: RNCC: 2 | RNVC: 1

17 Aug 2001

5340-27-038-1563
Retaining Clip

270381563
091-03-202: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-036-1938
Dust And Moisture Seal Protective Cap-Plug

270361938
CAPLUG-T-8: RNCC: 2 | RNVC: 1
CAPLUG-T-8: RNCC: 2 | RNVC: 1

10 May 2007

5340-27-037-5215
Yap Aluminyum Bant

270375215
BITUSELF: RNCC: 5 | RNVC: 9

2 Aug 2007

5340-27-024-5015
Retaining Clip

270245015
87253-25000: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-014-4015
Dust And Moisture Seal Protective Cover

270144015
491802015 A: RNCC: 2 | RNVC: 1
79301802018: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-037-3567
Dust And Moisture Seal Protective Plug

270373567
46584-S0100: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-037-9987
Dust And Moisture Seal Protective Plug

270379987
65238-6K200: RNCC: 5 | RNVC: 9

10 Sep 2007

5340-27-044-8411
Utility Resilient Mount

270448411
6C1R7B245CA: RNCC: 2 | RNVC: 1

16 Mar 2009

5340-27-040-8553
Pawl Fastener

270408553
63.60X52.40X27.50: RNCC: 2 | RNVC: 1

2 Apr 2008

5340-27-044-7205
Retaining Clip

270447205
3C112B223BB: RNCC: 2 | RNVC: 1

6 Mar 2009

5340-27-014-5881
Utility Resilient Mount

270145881
377770895001: RNCC: 2 | RNVC: 1

11 Nov 2002

5340-27-024-2247
Pipe Hanger

270242247
M.CETIN 054: RNCC: 2 | RNVC: 1

2 Oct 2004

5340-27-046-4100
Mounting Plate

270464100
M10.1.699.1: RNCC: 2 | RNVC: 1

5 Aug 2009

5340-27-014-4994
Dust And Moisture Seal Protective Cover

270144994
491802195 A: RNCC: 2 | RNVC: 1

22 Oct 2002

5340-27-054-3759
Dust And Moisture Seal Protective Plug

270543759
77 03 074 554: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-029-8161
Dust And Moisture Seal Protective Cover

270298161
5PS-17471-00-00: RNCC: 2 | RNVC: 1

24 May 2006

5340-27-009-8568
Retaining Clip

270098568
RSY-000000SVSFH-16: RNCC: 2 | RNVC: 1

20 Sep 2001

5340-27-011-8228
Dust And Moisture Seal Protective Cap

270118228
8C-771: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-040-6341
Mounting Plate

270406341
6040-4040-2002: RNCC: 2 | RNVC: 1

5 Feb 2008

5340-27-027-5430
Motor Takoz

270275430
54RS211097: RNCC: 2 | RNVC: 1

11 Oct 2005

5340-27-043-0924
Plaka

270430924
2ABEP00941: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-056-9991
Montaj Ayak

270569991
2.HIBM-4H-0666/4-0002: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-005-3875
Koruyucu Tapa

270053875
1.HIBM-1I-1214-T01: RNCC: 2 | RNVC: 1

16 Jul 1997

5340-27-012-4597
Tabela

270124597
5340-TJ1-00058: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-016-8620
Lock-Release Lever

270168620
EA12 P 08: RNCC: 2 | RNVC: 1

24 Mar 2003

5340-27-042-3706
Kapi Kolu Ayna

270423706
61234: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-009-6540
Mounting Plate

270096540
3133591-1: RNCC: 2 | RNVC: 1

13 Aug 2001

5340-27-047-6971
Dust And Moisture Seal Protective Plug

270476971
13C25-05413-AA: RNCC: 2 | RNVC: 1

14 Dec 2009

5340-27-029-7078
Retaining Strap

270297078
72A37-60681-AA: RNCC: 2 | RNVC: 1

4 May 2006

5340-27-047-4276
Retaining Bail

270474276
150-13-02-01-06-296: RNCC: 2 | RNVC: 1
150-13-02-01-06-296: RNCC: 5 | RNVC: 9

2 Dec 2009

5340-27-056-9368
Retaining Strap

270569368
YS01-01-037: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-056-9940
Montaj Ayak

270569940
2.HIBM-4H-0666/4/D-0003: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-053-3954
Dust And Moisture Seal Protective Cover

270533954
A0005422381: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-039-7039
Dust And Moisture Seal Protective Plug

270397039
20478143: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-045-2848
Mounting Plate

270452848
10024023: RNCC: 2 | RNVC: 1

22 Apr 2009

5340-27-016-5131
Helical Compression Spring Seat

270165131
M52T3011R-720009: RNCC: 2 | RNVC: 1
673-07-9: RNCC: 2 | RNVC: 1

31 Jan 2003

5340-27-005-7663
Multiple Angle Bracket

270057663
10131YB0603: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-038-1785
Engine Accessory Bracket

270381785
849653-1: RNCC: 2 | RNVC: 1

19 Sep 2007

5340-27-015-0511
Mounting Plate

270150511
1010FK-1811634-2: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8293
Protection Bellows

270158293
1009-1YK-0874: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-044-1389
Dust And Moisture Seal Protective Cover

270441389
81.15110-0472: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-026-2137
Kapak

270262137
71A79-68200-AA: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-050-5171
Utility Resilient Mount

270505171
107065-4: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-049-2530
Mounting Plate

270492530
1010FK-1911451-1: RNCC: 2 | RNVC: 1

15 Apr 2010

5340-27-042-7517
Retaining Clip

270427517
634604-L: RNCC: 2 | RNVC: 1

10 Sep 2008

5340-27-057-3836
Dust And Moisture Seal Protective Cover

270573836
K-1-1003031-1: RNCC: 5 | RNVC: 9

27 Jul 2012

5340-27-054-7856
Retaining Strap

270547856
202867-1: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-053-0850
Helical Compression Spring Retainer

270530850
901-CD-86-A11: RNCC: 2 | RNVC: 1

25 Mar 2011

5340-27-007-7178
Pawl Fastener

270077178
10029-0043: RNCC: 2 | RNVC: 1
10029-0043: RNCC: 2 | RNVC: 1

27 Jan 2000

5340-27-017-2285
Dust And Moisture Seal Protective Cover

270172285
7335794396: RNCC: 2 | RNVC: 1
7335794396: RNCC: 5 | RNVC: 2

29 May 2003

5340-27-050-8415
Manual Control Lever

270508415
6J8-43617-10: RNCC: 3 | RNVC: 2
6J8-43617-10: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-001-7312
Threaded End Tensioning Tie Rod

270017312
TM55-1520-210-2NAS27-3-22: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-8163
Mounting Plate

270508163
6H4-14146-10: RNCC: 3 | RNVC: 2
6H4-14146-10: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-27-019-5761
Mounting Plate

270195761
060100223: RNCC: 2 | RNVC: 1
TWN-12-212: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-7500
Helical Compression Spring Retainer

270057500
MT-717: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-021-3448
Double Angle Bracket

270213448
1010FG-0000413: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-3831
Dust And Moisture Seal Protective Cover

270573831
KJR175-136: RNCC: 5 | RNVC: 9

27 Jul 2012

5340-27-022-1972
Tespit Parca

270221972
9BM 5340-00038: RNCC: 2 | RNVC: 1

18 Feb 2004

5340-27-034-9832
Dust And Moisture Seal Protective Cover

270349832
12E00-08408-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-054-2911
Runner

270542911
98021755: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-011-8204
Dust And Moisture Seal Protective Cap

270118204
8C-11: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-055-5401
Perno

270555401
901-VM-20-20: RNCC: 2 | RNVC: 1

9 Dec 2011

5340-27-009-3696
Adaptor Plaka

270093696
6009-0524-1001: RNCC: 2 | RNVC: 1
6009-0524-1001: RNCC: 2 | RNVC: 1

22 Jun 2001

5340-27-056-4495
Mounting Plate

270564495
202883: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-026-0264
Dust And Moisture Seal Protective Cover

270260264
16001YE0090: RNCC: 2 | RNVC: 1

20 May 2005

5340-27-039-5519
Retaining Clamp Assembly

270395519
943717: RNCC: 2 | RNVC: 1

7 Dec 2007

5340-27-039-5108
Dust And Moisture Seal Protective Cover

270395108
UKS11: RNCC: 2 | RNVC: 1

5 Dec 2007

5340-27-059-5096
Headless Straight Rod

270595096
VOE15414875: RNCC: 3 | RNVC: 2
VOE15414875: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-037-2053
Engine Accessory Bracket

270372053
3836189: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-045-7244
Tutucu Parca

270457244
310-01.320.00: RNCC: 2 | RNVC: 2

8 Jun 2009

5340-27-048-7958
Mounting Plate

270487958
9034-24: RNCC: 2 | RNVC: 1
9034-24: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-056-6552
Mounting Plate

270566552
MM-7412-0264: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-044-3653
Tutucu

270443653
BA4-0635-020000: RNCC: 2 | RNVC: 1
BA4-0635-020000: RNCC: 5 | RNVC: 9

30 Jan 2009

5340-27-008-1562
Koruyucu Tipa

270081562
9330-0012-0000: RNCC: 2 | RNVC: 1
9330-0012-0000: RNCC: 2 | RNVC: 1

25 Jul 2000

5340-27-026-7747
Dust And Moisture Seal Protective Cover

270267747
20725338: RNCC: 2 | RNVC: 1
20725338-6: RNCC: 2 | RNVC: 1

1 Aug 2005

5340-27-055-2749
Kose Profil

270552749
PVC LAMBRI 6000X20X100 MM: RNCC: 5 | RNVC: 9

25 Nov 2011

5340-27-008-2171
Spring Holder

270082171
6040-0517-9001: RNCC: 2 | RNVC: 1
6040-0517-9001: RNCC: 2 | RNVC: 1

10 Aug 2000

5340-27-053-6974
Kapan Arac Giris Ci

270536974
LASTIK PATLATAN 7 METRE: RNCC: 5 | RNVC: 9

7 Jun 2011

5340-27-034-9443
Nut And Bolt Locking Plate

270349443
5-767-705: RNCC: 2 | RNVC: 1
5-767-705: RNCC: 2 | RNVC: 1

16 Feb 2007

5340-27-022-1643
Dust And Moisture Seal Protective Cover

270221643
901-CK-28: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-044-6947
Dust And Moisture Seal Protective Plug

270446947
81.25441-6192: RNCC: 2 | RNVC: 1

4 Mar 2009

5340-27-005-6143
Mounting Bracket

270056143
92VB-14551-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-053-1668
Mounting Plate

270531668
740.06.10-01.A019: RNCC: 2 | RNVC: 2

5 Apr 2011

5340-27-056-2887
Dust And Moisture Seal Protective Cover

270562887
18320ZT3000: RNCC: 5 | RNVC: 9
GBG1.0 INV-36: RNCC: 5 | RNVC: 9

9 Mar 2012

5340-27-021-4435
Mounting Plate

270214435
1009.1KI.0266-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-6455
Utility Resilient Mount

270566455
ASVD1450: RNCC: 2 | RNVC: 1
DM030500: RNCC: 2 | RNVC: 1

20 Apr 2012

5340-27-005-1543
Angle Bracket

270051543
1010001158: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-020-2935
Sabitleme Mandal

270202935
353MK7-12-13: RNCC: 2 | RNVC: 1

1 Dec 2003

5340-27-022-0643
Nut And Bolt Locking Plate

270220643
1009 1AD 0038: RNCC: 2 | RNVC: 1

30 Jan 2004

5340-27-025-1926
Helical Compression Spring Seat

270251926
239998: RNCC: 2 | RNVC: 1

27 Jan 2005

5340-27-021-4400
Mounting Plate

270214400
1009.1KI.0316-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-9368
Tutucu

270549368
41-3824065: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-052-2666
Buyuk Takoz

270522666
16F00-09042-AA: RNCC: 3 | RNVC: 2

31 Dec 2010

5340-27-041-6806
Adaptor Tutucu

270416806
83A19-61992-AA: RNCC: 2 | RNVC: 1
PTYM17200A-CGLT: RNCC: 2 | RNVC: 1

12 Jun 2008

5340-27-042-5967
Takoz Durdurucu

270425967
1010006272: RNCC: 2 | RNVC: 1

29 Aug 2008

5340-27-014-7628
Kenet Boru Destek

270147628
505162300: RNCC: 2 | RNVC: 1

27 Nov 2002

5340-27-051-7061
Utility Resilient Mount

270517061
3EC-71-12410: RNCC: 3 | RNVC: 2

22 Nov 2010

5340-27-005-6418
Mounting Plate

270056418
87VB-B045E60-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-057-3598
Montaj Ayak

270573598
2.HIBM-4H-0666/1/J-A9-1-0003: RNCC: 2 | RNVC: 1

24 Jul 2012

5340-27-040-9590
Utility Resilient Mount

270409590
LMT-027: RNCC: 5 | RNVC: 9

14 Apr 2008

5340-27-056-0991
Tutucu Kelepce

270560991
901-KL-257: RNCC: 2 | RNVC: 1

10 Feb 2012

5340-27-027-6587
Double Angle Bracket

270276587
1010FG-0000448: RNCC: 2 | RNVC: 1

19 Oct 2005

5340-27-029-6913
Retaining Strap

270296913
006000-001: RNCC: 2 | RNVC: 1

2 May 2006

5340-27-036-2713
Pim Mentese

270362713
1408/30: RNCC: 5 | RNVC: 9

18 May 2007

5340-27-022-3920
Clip Retainer Plate

270223920
901-KK-96: RNCC: 2 | RNVC: 1

4 Mar 2004

5340-27-025-4624
Dust And Moisture Seal Protective Cover

270254624
A21B4-12002: RNCC: 2 | RNVC: 1

18 Mar 2005

5340-27-059-1524
Baglanti Parcasi

270591524
1010FMA-3505122: RNCC: 2 | RNVC: 1

7 Jun 2013

5340-27-020-3127
Yatak Kapak

270203127
4121PR0048: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-024-2399
Retaining Clip

270242399
31325-25000: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-005-6265
Mounting Bracket

270056265
94VB-V220A90-BC: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-038-9376
Mounting Plate

270389376
1010FG-0800624: RNCC: 2 | RNVC: 1

5 Nov 2007

5340-27-027-6307
Dust And Moisture Seal Protective Cover

270276307
72B13-55075-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-002-3456
Buckle

270023456
KKK.TEK-P-12A: RNCC: 2 | RNVC: 1

5 Jun 1994

5340-27-027-0291
Retaining Clip

270270291
69293-33010: RNCC: 2 | RNVC: 1

24 Aug 2005

5340-27-040-5653
Mortise Latch Set

270405653
901-KM-86: RNCC: 2 | RNVC: 1

30 Jan 2008

5340-27-056-3642
Dust And Moisture Seal Protective Plug

270563642
58RS112557: RNCC: 2 | RNVC: 2

19 Mar 2012

5340-27-021-4391
Mounting Plate

270214391
1009.1KI.0272-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-2170
Dust And Moisture Seal Protective Plug

270122170
29678PJU: RNCC: 2 | RNVC: 1
298430 P: RNCC: 2 | RNVC: 1
29678PJU: RNCC: 2 | RNVC: 1

14 Oct 2002

5340-27-029-6535
Retaining Clip

270296535
90467-17003-00: RNCC: 2 | RNVC: 1

27 Apr 2006

5340-27-052-1118
Helical Compression Spring Seat

270521118
2520165-600-19: RNCC: 2 | RNVC: 1

20 Dec 2010

5340-27-028-4417
Utility Resilient Mount

270284417
72A28-30652-AA: RNCC: 2 | RNVC: 1

2 Jan 2006

5340-27-027-1486
Tutucu Boru

270271486
1010F-2600708-3: RNCC: 2 | RNVC: 1

9 Sep 2005

5340-27-040-6320
Support Block

270406320
8762949: RNCC: 2 | RNVC: 1

5 Feb 2008

5340-27-021-4247
Kaucuk Tampon

270214247
1010FK-1911315: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7376
Dust And Moisture Seal Protective Plug

270017376
TM55-2840-229-228953-3: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-001-7814
Dust And Moisture Seal Protective Cap

270017814
TM55-1520-210-2NAS817-3: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-038-2038
Utility Resilient Mount

270382038
470-4-18: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-018-8296
Mounting Plate

270188296
901-YP-13: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4822
Metal Olmay Tampon

270214822
1010FK-1911217: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-3330
Dust And Moisture Seal Protective Cover

270393330
897251393051: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-049-2936
Utility Resilient Mount

270492936
8200089697: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-27-034-0497
Headless Straight Rod

270340497
05400-13001: RNCC: 2 | RNVC: 1

6 Dec 2006

5340-27-026-7695
Dust And Moisture Seal Protective Cover

270267695
20412600-7: RNCC: 2 | RNVC: 1
20412600: RNCC: 3 | RNVC: 1
20412600-7: RNCC: 3 | RNVC: 1

1 Aug 2005

5340-27-036-6687
Govde Ici Ar Doseme

270366687
58RS112933: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-003-8253
Electronic Equipment Hardware Kit

270038253
6040-0516-4015: RNCC: 2 | RNVC: 1
6040-0516-4015: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-058-7320
Muhafaza

270587320
A-4510-00: RNCC: 2 | RNVC: 1

25 Mar 2013

5340-27-049-6709
Ara Parcasi

270496709
4593047911: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-044-2669
Firca Sap

270442669
UZATMALI SAP, 2 MT: RNCC: 2 | RNVC: 1
UZATMALI SAP, 2 MT: RNCC: 2 | RNVC: 1
UZATMALI SAP, 2 MT: RNCC: 2 | RNVC: 1

21 Jan 2009

5340-27-050-0196
Mesnet

270500196
189451-000-0: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-014-6203
Electronic Equipment Hardware Kit

270146203
5999-0311-1032: RNCC: 2 | RNVC: 1
5999-0311-1032: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-028-0962
Dust And Moisture Seal Protective Cover

270280962
72A13-36652-AA: RNCC: 2 | RNVC: 1

1 Dec 2005

5340-27-038-1213
Dust And Moisture Seal Protective Cap-Plug

270381213
44060-00H60: RNCC: 5 | RNVC: 9

14 Sep 2007

5340-27-011-8252
Dust And Moisture Seal Protective Plug

270118252
X-X.34: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-4466
Mounting Plate

270214466
1009.1KI.0221-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-011-8234
Dust And Moisture Seal Protective Cap

270118234
X-X: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-040-0718
Tutucu Kelepce

270400718
897357407051: RNCC: 2 | RNVC: 1

4 Jan 2008

5340-27-041-2910
Destek

270412910
2ABEP00617: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-056-3879
Tapa

270563879
1010007918: RNCC: 2 | RNVC: 1

22 Mar 2012

5340-27-055-6503
Tutucu Kelepce

270556503
1010FMA-0306092: RNCC: 2 | RNVC: 1

21 Dec 2011

5340-27-027-0290
Retaining Clip

270270290
53452-12040: RNCC: 2 | RNVC: 1

24 Aug 2005

5340-27-008-6869
Mounting Plate

270086869
3181059-1: RNCC: 2 | RNVC: 1

13 Nov 2001

5340-27-012-4639
Dust And Moisture Seal Protective Plug

270124639
7703075239: RNCC: 2 | RNVC: 1
9006 38: RNCC: 2 | RNVC: 1
20405719-4: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-010-1675
Mounting Plate

270101675
937204-1: RNCC: 2 | RNVC: 1
937204-1: RNCC: 2 | RNVC: 1

9 Nov 2001

5340-27-059-1721
Govde

270591721
3502923100: RNCC: 5 | RNVC: 9

11 Jun 2013

5340-27-013-0530
Utility Resilient Mount

270130530
46761804: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-016-3305
Spring Tension Clip

270163305
7703078048: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-053-2881
Mounting Plate

270532881
H231211000: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-036-6117
Mounting Plate

270366117
DK2023339: RNCC: 2 | RNVC: 1

15 Jun 2007

5340-27-058-8987
Retaining Clip

270588987
VOE12740168: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-27-025-1764
Multiple Angle Bracket

270251764
10131YB0126/F-685: RNCC: 2 | RNVC: 1

25 Jan 2005

5340-27-009-6459
Metal Olmay Tampon

270096459
7908 69: RNCC: 2 | RNVC: 1

9 Aug 2001

5340-27-032-3308
Mounting Plate

270323308
2ABM1AMB0021/3: RNCC: 2 | RNVC: 1

21 Jun 2006

5340-27-021-2847
Utility Resilient Mount

270212847
1009.1KI.0331-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-8265
Manual Control Lever

270068265
062000113-1: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-012-3401
Retaining Clip

270123401
E 865455: RNCC: 2 | RNVC: 1

24 Jan 2002

5340-27-008-6688
Mounting Plate

270086688
3181061-1: RNCC: 2 | RNVC: 1

13 Nov 2001

5340-27-058-0900
Retaining Clip

270580900
90603-ZV4-000: RNCC: 2 | RNVC: 1

7 Dec 2012

5340-27-035-2754
Retaining Clip

270352754
46455206: RNCC: 2 | RNVC: 1

6 Mar 2007

5340-27-005-1665
Double Angle Bracket

270051665
1010001127: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-026-3320
Retaining Clip

270263320
MB344587: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-005-6409
Mounting Bracket

270056409
92VT-B52102-BA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-037-6937
Retaining Clip

270376937
7703072360: RNCC: 2 | RNVC: 1

21 Aug 2007

5340-27-055-3399
Mounting Plate

270553399
72X716 ALUMINYUM: RNCC: 2 | RNVC: 1

30 Nov 2011

5340-27-018-2664
Retaining Clip

270182664
2954520: RNCC: 2 | RNVC: 1

13 Nov 2003

5340-27-021-2782
Nut And Bolt Retainer

270212782
1009.1KI.0264-2*1-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-2717
K Muhafaza Parcasi

270202717
115015060: RNCC: 2 | RNVC: 1

20 Nov 2003

5340-27-049-0828
Buckle

270490828
8200474340: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-27-005-6240
Dust And Moisture Seal Protective Plug

270056240
83BB-A20788-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-052-5610
Buckle

270525610
82 00 699 602: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-021-9694
Manual Control Handle

270219694
1010F-2600151: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-049-2215
Govde

270492215
1010FK-1911091-1: RNCC: 2 | RNVC: 1

13 Apr 2010

5340-27-041-9275
Dust And Moisture Seal Protective Cap

270419275
2.HIBM-4L-592/4-12: RNCC: 2 | RNVC: 1

1 Jul 2008

5340-27-044-5713
Tutucu

270445713
L-511-10700: RNCC: 2 | RNVC: 1
L-511-10700: RNCC: 5 | RNVC: 9

17 Feb 2009

5340-27-012-4520
Dust And Moisture Seal Protective Cover

270124520
97VT 7513 AA: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-009-7391
Metal Olmay Tampon

270097391
5131 73: RNCC: 2 | RNVC: 1

24 Aug 2001

5340-27-052-3981
Spring Holder

270523981
901-HT-28-7: RNCC: 2 | RNVC: 1

18 Jan 2011

5340-27-007-7719
Angle Bracket

270077719
10131YS0097: RNCC: 2 | RNVC: 1

16 Feb 2000

5340-27-009-3958
Manual Control Handle

270093958
10131YT0165: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-022-9491
Metal Olmay Tampon

270229491
22280: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-017-3992
Mounting Plate

270173992
1009.1IS.0060-6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-018-6933
Cushioning Pad

270186933
1010FG-1808010-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-1217
Manual Control Lever

270571217
1010FK-2810712-1: RNCC: 2 | RNVC: 1

21 Jun 2012

5340-27-052-2142
Mounting Plate

270522142
1010FK-1301002-1: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-032-2904
Dust And Moisture Seal Protective Cover

270322904
83A11-66180-AA: RNCC: 2 | RNVC: 1

15 Jun 2006

5340-27-003-8299
Electronic Equipment Hardware Kit

270038299
3522-1430-4110: RNCC: 2 | RNVC: 1
3522-1430-4110: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-033-6434
Mounting Plate

270336434
40-205-2340: RNCC: 2 | RNVC: 1
40-205-2340: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-027-3106
Headless Straight Rod

270273106
13C00-05018-AA: RNCC: 2 | RNVC: 1

26 Sep 2005

5340-27-051-4219
Tup Tasima Aparati

270514219
D-EPT2: RNCC: 2 | RNVC: 1

25 Oct 2010

5340-27-015-5494
Metal Olmay Tampon

270155494
11000-32006-AA: RNCC: 2 | RNVC: 1
572166-L: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-4612
Dust And Moisture Seal Protective Cover

270174612
H-39-0204-50-LP: RNCC: 2 | RNVC: 1

26 Jun 2003

5340-27-028-8003
Tutucu Kelepce

270288003
71A70-76929-AA: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-041-6015
Elevator Tel

270416015
ZB 5978: RNCC: 2 | RNVC: 1

6 Jun 2008

5340-27-039-1386
Adaptor

270391386
3838498: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-048-3510
Malzeme Dolab Kilit

270483510
302730: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-046-6448
Mounting Plate

270466448
3MV86632-0201: RNCC: 2 | RNVC: 2

17 Sep 2009

5340-27-026-5763
Dust And Moisture Seal Protective Plug

270265763
69283-30040: RNCC: 2 | RNVC: 1

13 Jul 2005

5340-27-027-0923
Dust And Moisture Seal Protective Cover

270270923
6650-KK-003-0771: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-044-5384
Casement Fastener

270445384
BA4-0621-030000: RNCC: 2 | RNVC: 1
BA4-0621-030000: RNCC: 5 | RNVC: 9

13 Feb 2009

5340-27-035-9022
Mesnet

270359022
366.07186-2: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-008-0401
E Montaj Malzemesi

270080401
9525: RNCC: 2 | RNVC: 1

8 Jun 2000

5340-27-049-8357
Flans

270498357
208141-01-0: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-016-7824
Mounting Plate

270167824
CE30-0081-01: RNCC: 2 | RNVC: 1

13 Mar 2003

5340-27-054-8440
Cam Fitil

270548440
H346063900: RNCC: 2 | RNVC: 1

18 Oct 2011

5340-27-050-9287
Retaining Clip

270509287
93430-04M03: RNCC: 2 | RNVC: 2

16 Sep 2010

5340-27-022-8802
Dust And Moisture Seal Protective Plug

270228802
15716-1140: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-042-9000
Protection Bellows

270429000
7701472765: RNCC: 2 | RNVC: 1
7701472765: RNCC: 2 | RNVC: 1

17 Sep 2008

5340-27-054-2915
Utility Resilient Mount

270542915
98014799: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-028-8264
Dust And Moisture Seal Protective Cover

270288264
14C01-36030-AA: RNCC: 2 | RNVC: 1

9 Feb 2006

5340-27-053-3452
Dust And Moisture Seal Protective Cover

270533452
897377690051: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-009-7270
Dust And Moisture Seal Protective Plug

270097270
7518 83: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-034-5259
Retaining Strap

270345259
51RS201638: RNCC: 2 | RNVC: 1

17 Jan 2007

5340-27-036-6222
Sliding Door Track Bracket

270366222
58RS112894: RNCC: 2 | RNVC: 1

18 Jun 2007

5340-27-036-5879
Mounting Plate

270365879
10003862: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-037-9327
Dust And Moisture Seal Protective Plug

270379327
3113582-3: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-037-4860
Engine Accessory Bracket

270374860
821106-2: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-023-8786
Kapak

270238786
7.13.09.04: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-021-4470
Mounting Plate

270214470
1009.1KI.0323-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-8466
Takma-Sokme Aparat

270578466
CV72355-VP9610: RNCC: 2 | RNVC: 1

7 Nov 2012

5340-27-004-5558
Giris Kapi

270045558
ACIL CIKIS KAPISI: RNCC: 2 | RNVC: 1
10091YK5010: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-018-6310
Retaining Strap

270186310
1010FG-0306100: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-8762
Adaptor Tutucu

270548762
901-OA-166-7: RNCC: 2 | RNVC: 1

20 Oct 2011

5340-27-057-1596
Dust And Moisture Seal Protective Cover

270571596
8-004-0005-6: RNCC: 2 | RNVC: 1

26 Jun 2012

5340-27-040-5162
Kapak

270405162
526961: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-038-3377
Engine Accessory Bracket

270383377
865786-8: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-058-5110
Spring Loaded Cylinder Fastener

270585110
102-F490-7990-011-000-0: RNCC: 2 | RNVC: 1

15 Feb 2013

5340-27-001-8058
Retaining Strap

270018058
TM55-1520-204-347-752-100-0: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-028-4120
Utility Resilient Mount

270284120
A-124: RNCC: 2 | RNVC: 1

29 Dec 2005

5340-27-054-6992
Kapama Bant

270546992
A9419893885: RNCC: 2 | RNVC: 1

7 Oct 2011

5340-27-057-1977
Montaj Ayak

270571977
2.HIBM-4H-0666/4/Y-0001: RNCC: 2 | RNVC: 1

2 Jul 2012

5340-27-057-6578
Metal Takoz

270576578
4566230752: RNCC: 5 | RNVC: 9

19 Sep 2012

5340-27-039-0188
Expansion Shield

270390188
6 MM: RNCC: 2 | RNVC: 1

8 Nov 2007

5340-27-042-9289
Kutu Numarator

270429289
BAL-288: RNCC: 2 | RNVC: 1

19 Sep 2008

5340-27-013-6584
Extension Drawer Slide Section

270136584
884-8400-030: RNCC: 2 | RNVC: 1
450MM RAY: RNCC: 2 | RNVC: 1
7125-77777-00012: RNCC: 2 | RNVC: 1
CEKMECE RAYI 45.LIK: RNCC: 2 | RNVC: 1
16001YR0151: RNCC: 2 | RNVC: 1
45: RNCC: 5 | RNVC: 9

10 Jul 2002

5340-27-044-9968
Dust And Moisture Seal Protective Cover

270449968
12E00-05044-AB: RNCC: 2 | RNVC: 1

25 Mar 2009

5340-27-040-6332
Support Block

270406332
8709307: RNCC: 2 | RNVC: 1

5 Feb 2008

5340-27-053-1544
Tutucu

270531544
102-F490-2430-003-000-0: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-021-3447
Double Angle Bracket

270213447
1010FG-0000412: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-4000
Retaining Clip

270094000
6611-0135: RNCC: 2 | RNVC: 1
6611-0135: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-036-8782
Engine Accessory Bracket

270368782
3825183-1: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-043-7717
Dust And Moisture Seal Protective Plug

270437717
Q 409069: RNCC: 2 | RNVC: 1

15 Dec 2008

5340-27-052-6938
Takma-Sokme Aparat

270526938
102-F496-8216-029-000-0: RNCC: 2 | RNVC: 1

16 Feb 2011

5340-27-036-9157
Utility Resilient Mount

270369157
2.HIBM-KY-0001/8-42: RNCC: 2 | RNVC: 1

5 Jul 2007

5340-27-056-8369
Montaj Ayak

270568369
2.HIBM-4H-0666/1/J-0004: RNCC: 2 | RNVC: 1

17 May 2012

5340-27-018-7024
Mounting Plate

270187024
1010FK-2810853: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-4678
Retaining Clip

270084678
8K35292: RNCC: 2 | RNVC: 1

13 Oct 2000

5340-27-008-5025
Retaining Clip

270085025
46442808: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-004-3245
Mounting Bracket

270043245
05001YT0206: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-038-1211
Pawl Fastener

270381211
58241-FA205: RNCC: 5 | RNVC: 9

14 Sep 2007

5340-27-004-5564
Mounting Plate

270045564
10091YP5030: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-026-3455
Utility Resilient Mount

270263455
MB270606: RNCC: 2 | RNVC: 1

30 Jun 2005

5340-27-038-0336
Dust And Moisture Seal Protective Cover

270380336
191G327-03: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-056-6616
Mounting Plate

270566616
MM-7412-0275: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-010-0987
Mounting Plate

270100987
24-910-5-2: RNCC: 2 | RNVC: 1

2 Nov 2001

5340-27-017-7158
Mounting Plate

270177158
H-39-0450-50: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-056-8228
Montaj Ayak

270568228
2.HIBM-4H-0666/1/J-0002: RNCC: 2 | RNVC: 1

16 May 2012

5340-27-027-6221
Kapak

270276221
PSV55- 101: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-057-0260
Montaj Ayak

270570260
2.HIBM-4H-0666/1/V-0009: RNCC: 2 | RNVC: 1

8 Jun 2012

5340-27-056-8978
Montaj Ayak

270568978
2.HIBM-4H-0666/1/V-0018: RNCC: 2 | RNVC: 2

28 May 2012

5340-27-035-9377
Dust And Moisture Seal Protective Plug

270359377
3C46E002T89AAW: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-057-0996
Montaj Ayak

270570996
2.HIBM-4H-0666/1/P-A14-3-0005: RNCC: 2 | RNVC: 1

20 Jun 2012

5340-27-044-5513
Kapak

270445513
BF0-5210-000000: RNCC: 2 | RNVC: 1
BF0-5210-000000: RNCC: 5 | RNVC: 9

16 Feb 2009

5340-27-034-7721
Dust And Moisture Seal Protective Plug

270347721
12B22-08300-AA: RNCC: 2 | RNVC: 1

7 Feb 2007

5340-27-008-4212
Dedektor Sap

270084212
6040-0516-1012: RNCC: 2 | RNVC: 1
6040-0516-1012: RNCC: 2 | RNVC: 1

6 Oct 2000

5340-27-052-9316
Retaining Clip

270529316
82 00 004 882: RNCC: 3 | RNVC: 2

8 Mar 2011

5340-27-058-0528
Dust And Moisture Seal Protective Cover

270580528
24830-ZV5-010: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-020-8699
Double Angle Bracket

270208699
1010FG-0000389: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-8858
Retaining Clip

270578858
CV72355-AT63326: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-002-9884
Retaining Band

270029884
205-061-001-029-WAT1: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-009-7234
Mounting Plate

270097234
3011R-300000.08: RNCC: 2 | RNVC: 1

22 Aug 2001

5340-27-057-8896
Takma-Sokme Aparat

270578896
KCU19-9U-6891: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-051-4359
Mounting Plate

270514359
1010FMA-0100132-50: RNCC: 2 | RNVC: 1

26 Oct 2010

5340-27-032-4990
Dust And Moisture Seal Protective Cover

270324990
83A11-66248-AA: RNCC: 2 | RNVC: 1

25 Jul 2006

5340-27-045-6670
Tabela

270456670
2000X1000X1.5 MM: RNCC: 2 | RNVC: 1

29 May 2009

5340-27-045-3878
Pim Mentese

270453878
8 LIK: RNCC: 5 | RNVC: 9

5 May 2009

5340-27-010-2142
Surgulu Destek

270102142
DZJC000092: RNCC: 2 | RNVC: 1

15 Nov 2001

5340-27-024-6906
Kapak

270246906
05001FK0227: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-044-6341
Tutucu Kelepce

270446341
1148610: RNCC: 2 | RNVC: 1

25 Feb 2009

5340-27-040-3860
Ara Parcasi

270403860
8389046: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-021-3396
Mounting Plate

270213396
1009.1KI.0211-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-5544
Buckle

270085544
P.T1667: RNCC: 2 | RNVC: 1

3 Nov 2000

5340-27-043-1187
Govde Ici Ar Doseme

270431187
58RS112339: RNCC: 2 | RNVC: 1

14 Oct 2008

5340-27-038-7091
Lever

270387091
7992927: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-023-9604
Muhafaza

270239604
8285835: RNCC: 2 | RNVC: 1

26 Aug 2004

5340-27-032-4711
Bayrak Direk Altlik

270324711
BAYRAK DIREGI ALTLIGI: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-017-4001
Mounting Plate

270174001
1009.1IS.0061-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-2857
Utility Resilient Mount

270212857
1009.1KI.0264-2*2-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-9657
Retaining Clip

270449657
7403A122: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-058-1053
Utility Resilient Mount

270581053
20011: RNCC: 2 | RNVC: 1
20011: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-039-3154
Retaining Clip

270393154
7703081223: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-035-6562
Utility Resilient Mount

270356562
897187416001: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-017-4384
Mounting Plate

270174384
10004529: RNCC: 2 | RNVC: 1

24 Jun 2003

5340-27-020-2088
Utility Resilient Mount

270202088
19105T: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-009-5650
Dust And Moisture Seal Protective Plug

270095650
14327401: RNCC: 2 | RNVC: 1

26 Jul 2001

5340-27-007-7685
Mounting Plate

270077685
10131YB0103: RNCC: 2 | RNVC: 1

11 Feb 2000

5340-27-057-4853
Utility Resilient Mount

270574853
8200114739: RNCC: 2 | RNVC: 1

14 Aug 2012

5340-27-023-4082
Threaded Rod End

270234082
T2802: RNCC: 2 | RNVC: 1

26 Jun 2004

5340-27-008-4956
Retaining Clip

270084956
85002270: RNCC: 2 | RNVC: 1

19 Oct 2000

5340-27-023-0621
Mounting Plate

270230621
948523-802: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-057-6947
Dust And Moisture Seal Protective Cover

270576947
1.HIBM-2A-2713: RNCC: 2 | RNVC: 1

26 Sep 2012

5340-27-037-3759
Dust And Moisture Seal Protective Cover

270373759
83A11-58258-AA: RNCC: 2 | RNVC: 1

25 Jul 2007

5340-27-019-6181
Buckle

270196181
05001HT0033: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-9259
Utility Resilient Mount

270199259
5360ATF0042: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-4196
Pim Mentese

270204196
5340-ATF-0350: RNCC: 2 | RNVC: 1

8 Dec 2003

5340-27-012-4596
Tabela

270124596
5340-TJ1-00057: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-040-6654
Baglanti Halka

270406654
1010006118: RNCC: 2 | RNVC: 1

21 Feb 2008

5340-27-034-1073
Ara Parcasi

270341073
2ABEP00055: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-016-8191
Mounting Plate

270168191
10091AD0008-1: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-012-8244
Helical Compression Spring Seat

270128244
988-1209-001: RNCC: 2 | RNVC: 1

25 Mar 2002

5340-27-058-5346
Mounting Plate

270585346
920-8178/03: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-040-3146
Mounting Plate

270403146
98000-0850: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-058-4337
Tutucu Kelepce

270584337
1010FMA-1901137: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-044-3913
Double Angle Bracket

270443913
51.25441-0312: RNCC: 2 | RNVC: 1

2 Feb 2009

5340-27-028-0842
Dust And Moisture Seal Protective Plug

270280842
2T14V10404AB: RNCC: 2 | RNVC: 1
90338-10132-00: RNCC: 2 | RNVC: 1

30 Nov 2005

5340-27-056-2883
Koruyucu Kapak

270562883
63340ZT3C00: RNCC: 5 | RNVC: 9
GBG1.0 INV-34: RNCC: 5 | RNVC: 9

9 Mar 2012

5340-27-022-0994
Birlestirme Parcasi

270220994
9BM 5340-00003: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-032-2045
Mounting Plate

270322045
KEB10050-103: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-037-8064
Dust And Moisture Seal Protective Cover

270378064
73A15-61252-AA: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-016-5127
Helical Compression Spring Seat

270165127
673-07-10: RNCC: 2 | RNVC: 1
M52T3011R-720011: RNCC: 2 | RNVC: 1

31 Jan 2003

Load More Results