What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 46 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 46 of 53

5340-27-042-7380
Mounting Plate

270427380
1010006254: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-053-0287
Dust And Moisture Seal Protective Cover

270530287
10030108: RNCC: 2 | RNVC: 1

18 Mar 2011

5340-27-049-2394
Ara Parcasi

270492394
1000151-214-060: RNCC: 2 | RNVC: 1

14 Apr 2010

5340-27-055-2817
Sac

270552817
PVC KASA PROFIL DESTEK SACI 1.2: RNCC: 5 | RNVC: 9

28 Nov 2011

5340-27-046-9081
Tutucu

270469081
897353151051: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-27-007-4195
Zincirli Kelepce

270074195
680 MM: RNCC: 2 | RNVC: 1
680MM: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-026-7529
Mounting Plate

270267529
1.HIBM-1I-2278D02: RNCC: 2 | RNVC: 1

28 Jul 2005

5340-27-021-4432
Mounting Plate

270214432
1009.1KI.0284-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-3772
Mounting Plate

270363772
A 100: RNCC: 2 | RNVC: 1

29 May 2007

5340-27-046-3795
Utility Resilient Mount

270463795
MWC5759-L: RNCC: 2 | RNVC: 1

3 Aug 2009

5340-27-023-0865
Nut And Bolt Head Protective Cap

270230865
07 BMK P 0297: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-029-7983
Mounting Plate

270297983
1.HIBM-1I-2332: RNCC: 2 | RNVC: 1

17 May 2006

5340-27-042-7676
Dust And Moisture Seal Protective Plug

270427676
338023-L: RNCC: 2 | RNVC: 1

10 Sep 2008

5340-27-022-1874
Mounting Plate

270221874
9BM 5340-00030: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-050-6697
Tutucu

270506697
314H85: RNCC: 2 | RNVC: 1

16 Aug 2010

5340-27-049-1445
Kapak

270491445
70292-1: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-049-9783
Dust And Moisture Seal Protective Plug

270499783
7700429932: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-035-4108
Retaining Clip

270354108
7689736: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-021-4871
Mounting Plate

270214871
05001DP0019: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-5170
Utility Resilient Mount

270505170
107065-11: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-021-0731
Dust And Moisture Seal Protective Cap

270210731
A224071: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-7258
Dust And Moisture Seal Protective Plug

270097258
6555 HT: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-027-0582
Dust And Moisture Seal Protective Cover

270270582
05001FK0271: RNCC: 2 | RNVC: 1

29 Aug 2005

5340-27-058-1409
Dust And Moisture Seal Protective Plug

270581409
183-3406: RNCC: 2 | RNVC: 1

14 Dec 2012

5340-27-055-2003
Mounting Plate

270552003
UG 063000 POZ-13: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-055-3431
Mounting Plate

270553431
1692-0069: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-016-8198
Mounting Plate

270168198
10091AD0012-1: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-021-2861
Casement Fastener

270212861
1009.1KI.0170-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-3567
Casement Fastener

270073567
W 701410 S: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-040-4122
Baglanti Parcasi

270404122
2854281-1: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-023-1125
Retaining Strap

270231125
1010FK-2810900-1: RNCC: 2 | RNVC: 1

28 May 2004

5340-27-056-8233
Lastik Takoz

270568233
2.HIBM-4H-0666/1/G-0007: RNCC: 2 | RNVC: 1

16 May 2012

5340-27-032-8396
Dust And Moisture Seal Protective Cover

270328396
13C00-16747-AA: RNCC: 2 | RNVC: 1

21 Sep 2006

5340-27-035-5583
Engine Accessory Bracket

270355583
20556032: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-018-6984
Mounting Plate

270186984
1010FK-2701727: RNCC: 2 | RNVC: 1
1010FK-2701727: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-7800
Mounting Plate

270587800
VOE12744190: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-038-2787
Dust And Moisture Seal Protective Cover

270382787
25239-6K265: RNCC: 5 | RNVC: 9

26 Sep 2007

5340-27-055-6317
Utility Resilient Mount

270556317
ASV-W3408-50: RNCC: 2 | RNVC: 2

20 Dec 2011

5340-27-022-6609
Dust And Moisture Seal Protective Cover

270226609
4026 05: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-026-3321
Retaining Clip

270263321
MB082164: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-026-3943
Retaining Clip

270263943
MU481137: RNCC: 2 | RNVC: 1

6 Jul 2005

5340-27-017-7161
Runner

270177161
H-39-0409-50: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-013-9315
Manual Control Lever

270139315
388881215001: RNCC: 2 | RNVC: 1

12 Aug 2002

5340-27-034-1663
Dust And Moisture Seal Protective Cover

270341663
13D00-66201-AA: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-027-9385
Retaining Strap

270279385
52RS007037: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-009-3284
Dust And Moisture Seal Protective Cover

270093284
7799872: RNCC: 2 | RNVC: 1
7730112: RNCC: 2 | RNVC: 1

15 Jun 2001

5340-27-044-9223
Retaining Clip

270449223
51722666: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-044-7958
Retaining Clip

270447958
MB668684: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-045-1733
Headless Straight Rod

270451733
4013A090: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-27-020-2024
Retaining Clip

270202024
7700519045: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-5541
Engine Accessory Bracket

270355541
20405631: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-028-1207
Retaining Clip

270281207
7703079328: RNCC: 2 | RNVC: 1

5 Dec 2005

5340-27-023-2186
Retaining Clip

270232186
15492-5520: RNCC: 2 | RNVC: 1

8 Jun 2004

5340-27-005-1667
Double Angle Bracket

270051667
1010001464: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-014-9161
Hand Carrying Strap Assembly

270149161
7116220826: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-045-7440
Mounting Plate

270457440
10029124: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-014-8283
Dust And Moisture Seal Protective Cover

270148283
7700856288: RNCC: 2 | RNVC: 1
7702252789: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-005-1673
Mounting Bracket

270051673
1010000214: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-040-7962
Retaining Clip

270407962
MH020918: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-019-8844
Mounting Plate

270198844
1010F-0000154: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-4091
Dust And Moisture Seal Protective Plug

270174091
1.HIBM-1I-2049: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-041-0277
Dust And Moisture Seal Protective Cover

270410277
ME739098: RNCC: 2 | RNVC: 1

22 Apr 2008

5340-27-054-0213
Mounting Plate

270540213
H343407501: RNCC: 2 | RNVC: 1

15 Jul 2011

5340-27-012-3773
Retaining Clip

270123773
95VW B014235 AA: RNCC: 2 | RNVC: 1

28 Jan 2002

5340-27-057-3673
Retaining Strap

270573673
011110000000: RNCC: 2 | RNVC: 1

26 Jul 2012

5340-27-043-8213
Sliding Door Track Bracket

270438213
58RS110495: RNCC: 2 | RNVC: 1

17 Dec 2008

5340-27-048-2476
Headless Straight Rod

270482476
51RS960100: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-012-4506
Retaining Clip

270124506
7703079131: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-009-0165
Protection Bellows

270090165
2K10489: RNCC: 2 | RNVC: 1

29 Mar 2001

5340-27-039-9158
Retaining Clip

270399158
8200187842: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-023-4783
Handwheel

270234783
7654401: RNCC: 2 | RNVC: 1

3 Jul 2004

5340-27-016-7464
Retaining Clip

270167464
46769149: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-008-9047
Mounting Plate

270089047
98000580: RNCC: 2 | RNVC: 1

15 Feb 2001

5340-27-056-6364
Utility Resilient Mount

270566364
ASVB7000: RNCC: 2 | RNVC: 1
DM000700: RNCC: 2 | RNVC: 1

19 Apr 2012

5340-27-058-8736
Kilit

270588736
13C10-73114-AA: RNCC: 2 | RNVC: 1

19 Apr 2013

5340-27-055-2618
Mounting Plate

270552618
UG 063000 POZ-3: RNCC: 2 | RNVC: 1
UG 063000 POZ-3: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-029-6322
Metal Olmay Tampon

270296322
5CG-85113-00-00: RNCC: 5 | RNVC: 9

26 Apr 2006

5340-27-054-1828
Sac Mahfaza

270541828
40-008.00/10-127-2005: RNCC: 2 | RNVC: 1

4 Aug 2011

5340-27-055-2736
Profil

270552736
PROFIL 6000X59X120 MM: RNCC: 5 | RNVC: 9

25 Nov 2011

5340-27-021-6276
Antipilferage Seal

270216276
5340-TJ-02573: RNCC: 2 | RNVC: 1

19 Dec 2003

5340-27-038-3370
Tutucu Parca

270383370
8152212-0: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-021-4395
Mounting Plate

270214395
1009.1KI.0316-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-033-0174
Dust And Moisture Seal Protective Cover

270330174
13C00-15076-AB: RNCC: 2 | RNVC: 1

10 Oct 2006

5340-27-037-5578
Retaining Bail

270375578
64X8 MM: RNCC: 5 | RNVC: 9

7 Aug 2007

5340-27-013-0214
Utility Resilient Mount

270130214
7700504590: RNCC: 2 | RNVC: 1

11 Apr 2002

5340-27-009-1997
Mounting Plate

270091997
98005127: RNCC: 2 | RNVC: 1

23 May 2001

5340-27-037-8908
Dust And Moisture Seal Protective Plug

270378908
109605050051: RNCC: 2 | RNVC: 1

4 Sep 2007

5340-27-014-0230
Nut And Bolt Locking Plate

270140230
377770495001: RNCC: 2 | RNVC: 1

28 Aug 2002

5340-27-043-1805
Mortise Latch Set

270431805
7700823039: RNCC: 2 | RNVC: 1
7700823039: RNCC: 2 | RNVC: 1

17 Oct 2008

5340-27-058-9272
Door Handle

270589272
VOE12745487: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-006-8787
Manual Control Lever

270068787
10131YK0186: RNCC: 2 | RNVC: 1

7 Jun 1999

5340-27-035-7358
Engine Accessory Bracket

270357358
3826892: RNCC: 2 | RNVC: 1

27 Mar 2007

5340-27-008-7904
Retaining Clip

270087904
81.97401.0948: RNCC: 2 | RNVC: 1
8503 J6: RNCC: 2 | RNVC: 1

17 Jan 2001

5340-27-058-0330
Retaining Clip

270580330
CV71831: RNCC: 2 | RNVC: 1

3 Dec 2012

5340-27-013-0210
Utility Resilient Mount

270130210
7700800522: RNCC: 2 | RNVC: 1
8200171178: RNCC: 2 | RNVC: 1

11 Apr 2002

5340-27-041-6965
Headless Straight Rod

270416965
46231: RNCC: 2 | RNVC: 1

12 Jun 2008

5340-27-048-5437
Utility Resilient Mount

270485437
HD213578Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-037-4243
Retaining Clip

270374243
7758772: RNCC: 2 | RNVC: 1

30 Jul 2007

5340-27-052-8712
Dust And Moisture Seal Protective Cover

270528712
82 00 091 118: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-27-008-5476
Mounting Plate

270085476
16HY1-302000.04: RNCC: 2 | RNVC: 1

1 Nov 2000

5340-27-044-2242
Dust And Moisture Seal Protective Cover

270442242
12E01-58507-AA: RNCC: 2 | RNVC: 1

16 Jan 2009

5340-27-018-8297
Mounting Plate

270188297
901-YP-14: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-6513
Utility Resilient Mount

270176513
387001581001: RNCC: 2 | RNVC: 1

13 Aug 2003

5340-27-022-2592
Cushioning Pad

270222592
18293MN0000: RNCC: 2 | RNVC: 1
18293MN0000: RNCC: 5 | RNVC: 9

20 Feb 2004

5340-27-038-1779
Kol

270381779
863450-3: RNCC: 2 | RNVC: 1

19 Sep 2007

5340-27-052-4236
Spring Holder

270524236
01-1185-0000-4: RNCC: 2 | RNVC: 1

21 Jan 2011

5340-27-046-4093
Mounting Plate

270464093
M10.1.702.1: RNCC: 2 | RNVC: 1

5 Aug 2009

5340-27-042-6648
Mounting Plate

270426648
1,5X30X125: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-034-9135
Dust And Moisture Seal Protective Cover

270349135
13D00-36596-AA: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-017-2132
Mounting Plate

270172132
H-39-5257-50: RNCC: 2 | RNVC: 1

28 May 2003

5340-27-010-2969
Baglanti Serit

270102969
169136-8: RNCC: 2 | RNVC: 1
169136-8: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-044-1973
Mounting Plate

270441973
AMJP24H18: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-040-7938
Retaining Clip

270407938
MK479609: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-039-3887
Dust And Moisture Seal Protective Cover

270393887
90CT16548A1B: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-042-9688
Kapak

270429688
40.205.3375: RNCC: 2 | RNVC: 1
40.205.3375: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-043-1484
Mounting Plate

270431484
12740689: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-042-3800
Surgulu Kilit

270423800
NO:2X4: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-043-1535
Utility Resilient Mount

270431535
74A05-60223-AA: RNCC: 2 | RNVC: 1

15 Oct 2008

5340-27-005-6107
Mounting Bracket

270056107
86VB-13K056-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-028-6471
Takim Acmak I Aski

270286471
72A08-35304-AA: RNCC: 2 | RNVC: 1

26 Jan 2006

5340-27-029-6109
Mortise Latch Set

270296109
2540KILI9880023: RNCC: 2 | RNVC: 1

20 Apr 2006

5340-27-027-6698
Dust And Moisture Seal Protective Cap

270276698
81.61942.0083: RNCC: 2 | RNVC: 1

19 Oct 2005

5340-27-028-0844
Retaining Clip

270280844
7709398: RNCC: 2 | RNVC: 1

30 Nov 2005

5340-27-024-6870
Tutucu

270246870
05001FT0112: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-039-6414
Antipilferage Seal

270396414
SP 2: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-017-3991
Mounting Plate

270173991
1009.1IS.0060-5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-005-1625
Pipe Hanger

270051625
1010001242: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-039-3238
Kapak

270393238
20776627: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-035-8028
Dust And Moisture Seal Protective Cover

270358028
3827504: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-054-0044
Dust And Moisture Seal Protective Cover

270540044
24 44 667 37R: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-27-034-9370
Dust And Moisture Seal Protective Cover

270349370
692295: RNCC: 2 | RNVC: 1

16 Feb 2007

5340-27-008-8553
Double Angle Bracket

270088553
98001477: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-015-1368
Nut And Bolt Locking Plate

270151368
5.02.01.04: RNCC: 2 | RNVC: 1
07 BMK P 0203: RNCC: 2 | RNVC: 1
5.02.01.04: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-029-0751
Mounting Plate

270290751
10121YS5579: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-018-6598
Mounting Plate

270186598
1010FK-3512712: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-003-9222
Retaining Strap

270039222
07001MN0394: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-058-4688
Mounting Plate

270584688
1010FMA-1901214: RNCC: 2 | RNVC: 1

5 Feb 2013

5340-27-023-1592
Dust And Moisture Seal Boot

270231592
22612: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-040-9910
Utility Resilient Mount

270409910
MK426603: RNCC: 2 | RNVC: 1

16 Apr 2008

5340-27-040-4158
Mounting Plate

270404158
8762341: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-048-5238
Utility Resilient Mount

270485238
HD171256Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-018-2479
Utility Resilient Mount

270182479
1009 1YL 0053: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-025-3964
Utility Resilient Mount

270253964
132A01: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-048-9230
Monta Plaka Takimi

270489230
10029344: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-043-0247
Buton

270430247
40.690.0013: RNCC: 2 | RNVC: 1
40.690.0013: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-025-8763
Door-Hatch Dog Wedge

270258763
2ABM 1MK 0072: RNCC: 2 | RNVC: 1

25 Apr 2005

5340-27-025-8788
Helical Compression Spring Seat

270258788
854186: RNCC: 2 | RNVC: 1

25 Apr 2005

5340-27-046-8834
Tutucu

270468834
898057416051: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-27-036-0144
Monta Plaka Takimi

270360144
10025843: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-043-2020
Retaining Clip

270432020
7703035009: RNCC: 2 | RNVC: 1

20 Oct 2008

5340-27-054-2723
Casement Fastener

270542723
98019332: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-020-4833
Mounting Plate

270204833
98014070: RNCC: 2 | RNVC: 1

9 Dec 2003

5340-27-054-3985
Utility Resilient Mount

270543985
107590: RNCC: 2 | RNVC: 2

6 Sep 2011

5340-27-027-4661
Kovan

270274661
1010FK-1802035: RNCC: 2 | RNVC: 1

5 Oct 2005

5340-27-040-5241
Ara Parcasi

270405241
10864389: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-025-9951
Threaded Rod End

270259951
R79856403: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-022-0011
Utility Resilient Mount

270220011
14913T: RNCC: 2 | RNVC: 1

21 Jan 2004

5340-27-017-3272
Mounting Plate

270173272
MP001114: RNCC: 2 | RNVC: 1

17 Jun 2003

5340-27-054-9463
Clamping Catch Fastener

270549463
1486-49421.6096: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-055-4230
Nut And Bolt Locking Plate

270554230
203287: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-010-1371
Dust And Moisture Seal Protective Plug

270101371
73B00-03620-AA: RNCC: 2 | RNVC: 1

7 Nov 2001

5340-27-014-6389
Electronic Equipment Hardware Kit

270146389
3522-1540-6800: RNCC: 2 | RNVC: 1
3522-1540-6800: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-050-8413
Manual Control Lever

270508413
6J8-43681-01: RNCC: 3 | RNVC: 2
6J8-43681-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-016-9556
Handwheel

270169556
98003164: RNCC: 2 | RNVC: 1

21 Apr 2003

5340-27-012-4493
Retaining Clip

270124493
78GG 14613 AA: RNCC: 2 | RNVC: 1

30 Jan 2002

5340-27-025-4953
Dust And Moisture Seal Protective Plug

270254953
22193-03001: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-058-7095
Mounting Plate

270587095
9BM 5340-00668: RNCC: 2 | RNVC: 1

20 Mar 2013

5340-27-050-8414
Manual Control Lever

270508414
6J8-43631-10: RNCC: 3 | RNVC: 2
6J8-43631-10: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-027-8084
Mortise Latch Set

270278084
72A22-70496-AB: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-010-3104
Mounting Plate

270103104
5999-0310-8001: RNCC: 2 | RNVC: 1
5999-0310-8001: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-007-6788
Dust And Moisture Seal Protective Cap

270076788
6009-0516-4015: RNCC: 2 | RNVC: 1
6009-0516-4015: RNCC: 2 | RNVC: 1

18 Jan 2000

5340-27-053-9031
Access Door Hinge

270539031
H346031900: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-046-9575
Manual Control Lever

270469575
898071383051: RNCC: 2 | RNVC: 1

22 Oct 2009

5340-27-054-3752
Dust And Moisture Seal Protective Plug

270543752
82 00 641 966: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-059-1222
Sabitleme Destek

270591222
3502607010: RNCC: 5 | RNVC: 9

30 May 2013

5340-27-049-4055
Govde

270494055
1010FK-1911130-1: RNCC: 2 | RNVC: 1

29 Apr 2010

5340-27-010-2326
Clip Retainer Plate

270102326
DZJA000187: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-038-1907
Engine Accessory Bracket

270381907
849284: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-016-3298
Spring Tension Clip

270163298
7703078029: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-051-6623
Headless Straight Rod

270516623
3EC-37-11161: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-005-8456
Tubular Fairlead Half

270058456
16HY1-303-100-03: RNCC: 3 | RNVC: 2

19 Feb 1998

5340-27-041-0597
Dust And Moisture Seal Protective Plug

270410597
7150080: RNCC: 2 | RNVC: 1

28 Apr 2008

5340-27-040-0287
Access Door Hinge

270400287
11151MM0107: RNCC: 2 | RNVC: 1

3 Jan 2008

5340-27-045-1127
Retaining Clip

270451127
MR181745: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-052-3135
Spring Tension Clip

270523135
102899: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-27-049-1678
Utility Resilient Mount

270491678
MP002702: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-020-1991
Headless Straight Rod

270201991
7701624287: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-9278
Headless Grooved Rod

270259278
R79856655: RNCC: 2 | RNVC: 1

4 May 2005

5340-27-048-6388
Dust And Moisture Seal Protective Plug

270486388
TY172949: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-27-028-0852
Retaining Clip

270280852
7683834: RNCC: 2 | RNVC: 1

30 Nov 2005

5340-27-040-7941
Retaining Clip

270407941
MB050032: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-027-8867
Cushioning Pad

270278867
M52T3011R450130: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-005-6400
Mounting Bracket

270056400
92VT-B502K99-BA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-014-4474
Dust And Moisture Seal Protective Cover

270144474
IT KGTK 009: RNCC: 2 | RNVC: 1

16 Oct 2002

5340-27-025-0669
Spring Holder

270250669
05001FT0119: RNCC: 2 | RNVC: 1

29 Dec 2004

5340-27-036-8744
Engine Accessory Bracket

270368744
1587695: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-018-9028
Dust And Moisture Seal Protective Cover

270189028
1206KYL0991: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-2159
Retaining Clip

270362159
60576640: RNCC: 2 | RNVC: 1

14 May 2007

5340-27-025-0056
Mounting Plate

270250056
1009 1YS 1182: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-005-3745
Friction Catch Housing

270053745
1012-1YP-5446: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-27-038-6532
Utility Resilient Mount

270386532
34X25 CM: RNCC: 2 | RNVC: 1

24 Oct 2007

5340-27-035-5416
Dust And Moisture Seal Protective Cover

270355416
845422: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-004-5160
Mounting Bracket

270045160
10121YK5323: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-004-6717
Lever Bracket

270046717
1.HIBM-1I-1517 D04: RNCC: 3 | RNVC: 2

15 Aug 1996

5340-27-024-5340
Antipilferage Seal

270245340
204-072-923-1: RNCC: 2 | RNVC: 1

10 Nov 2004

5340-27-029-6315
Metal Olmay Tampon

270296315
5EA-25364-00-00: RNCC: 5 | RNVC: 9

26 Apr 2006

5340-27-043-4078
Utility Resilient Mount

270434078
74A05-62227-AA: RNCC: 2 | RNVC: 1

6 Nov 2008

5340-27-024-3191
Retaining Clip

270243191
86593-24000: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-049-9773
Retaining Clip

270499773
7700429938: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-028-6995
Dust And Moisture Seal Protective Cover

270286995
MB345647: RNCC: 2 | RNVC: 1

31 Jan 2006

5340-27-007-4457
Last Ekleme Kancasi

270074457
R2: RNCC: 2 | RNVC: 1

17 Nov 1999

5340-27-019-1419
Utility Resilient Mount

270191419
81960200317: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-041-2723
Retaining Clip

270412723
7253661: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-024-8797
Utility Resilient Mount

270248797
11303T: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-013-0216
Utility Resilient Mount

270130216
7702246328: RNCC: 2 | RNVC: 1

11 Apr 2002

5340-27-041-5971
Dust And Moisture Seal Protective Cover

270415971
69955: RNCC: 3 | RNVC: 2
69955: RNCC: 5 | RNVC: 9

6 Jun 2008

5340-27-039-4946
Utility Resilient Mount

270394946
1938297: RNCC: 2 | RNVC: 1

4 Dec 2007

5340-27-048-6196
Headless Straight Rod

270486196
TM260276AY: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-27-016-2943
Strap Fastener Loop

270162943
300101-2: RNCC: 2 | RNVC: 1

25 Dec 2002

5340-27-027-7344
Dust And Moisture Seal Protective Cover

270277344
G-51623: RNCC: 2 | RNVC: 1
G-51623: RNCC: 5 | RNVC: 9

25 Oct 2005

5340-27-017-4076
Resilient Mount Plate

270174076
1009.1IS.0028-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-022-1960
Birlestirme Parcasi

270221960
9BM 5340-00041: RNCC: 2 | RNVC: 1

18 Feb 2004

5340-27-048-7688
Mounting Plate

270487688
9034-40: RNCC: 2 | RNVC: 1
9034-40: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-036-0748
Retaining Clip

270360748
8508973: RNCC: 2 | RNVC: 1

26 Apr 2007

5340-27-025-1000
Makara Donanimi

270251000
05001FM0134: RNCC: 2 | RNVC: 1

5 Jan 2005

5340-27-006-7190
Dust And Moisture Seal Protective Cap-Plug Set

270067190
1.HIBM-1R-1074: RNCC: 2 | RNVC: 1

25 Mar 1999

5340-27-032-3421
Dust And Moisture Seal Protective Cover

270323421
83A18-61061-AA: RNCC: 2 | RNVC: 1

23 Jun 2006

5340-27-028-3832
Flans

270283832
M52T3011R450186: RNCC: 2 | RNVC: 1

27 Dec 2005

5340-27-023-3681
Sac Mahfaza

270233681
1934151200: RNCC: 2 | RNVC: 1
4.06.16.00: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-048-8335
Kapi C Stoplayici

270488335
894434771051: RNCC: 3 | RNVC: 2

8 Mar 2010

5340-27-056-3988
Topuz Komple

270563988
233240901: RNCC: 5 | RNVC: 9

26 Mar 2012

5340-27-047-9824
Retaining Clip

270479824
58RS501720: RNCC: 2 | RNVC: 1

25 Dec 2009

5340-27-014-7744
Rampa Destek Ayagi

270147744
505041003: RNCC: 2 | RNVC: 1

28 Nov 2002

5340-27-023-6296
Kapak Mandal

270236296
05001FM0073: RNCC: 2 | RNVC: 1
330252: RNCC: 2 | RNVC: 1

21 Jul 2004

5340-27-043-2425
Kose Profil

270432425
SUPURGELIK BITIM ELEMANI: RNCC: 2 | RNVC: 1

22 Oct 2008

5340-27-002-3458
Buckle

270023458
KUM-1: RNCC: 2 | RNVC: 1

5 Jun 1994

5340-27-033-6381
Expansion Shield

270336381
12 MM DUBEL: RNCC: 5 | RNVC: 9

7 Nov 2006

5340-27-049-6459
Govde

270496459
40128: RNCC: 2 | RNVC: 1

14 May 2010

5340-27-015-6972
Mounting Plate

270156972
10091KI0317: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6929
Mounting Plate

270156929
10091KI0122: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-8437
Dust And Moisture Seal Protective Cover

270398437
24020: RNCC: 2 | RNVC: 1

24 Dec 2007

5340-27-045-5821
Mounting Plate

270455821
400500141100: RNCC: 2 | RNVC: 2

15 May 2009

5340-27-024-6499
Spring Holder

270246499
06221: RNCC: 2 | RNVC: 1
7793025: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-038-7441
Protection Bellows

270387441
10091YK0876: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-018-9962
Retaining Clip

270189962
07002YM0159: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-016-3304
Spring Tension Clip

270163304
7700531021: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-004-7889
Double Angle Bracket

270047889
10091YP5061: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-028-1143
Runner

270281143
72A18-73801-AA: RNCC: 2 | RNVC: 1

2 Dec 2005

5340-27-027-7288
Dust And Moisture Seal Protective Cover

270277288
7151358: RNCC: 2 | RNVC: 1

25 Oct 2005

5340-27-058-3910
Utility Resilient Mount

270583910
13214E2772: RNCC: 2 | RNVC: 1

21 Jan 2013

5340-27-011-4598
Kaucuk Tampon

270114598
99999-NIIN-DA0160153: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-017-0068
Mounting Plate

270170068
6040-0533-9019: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-010-4799
Mounting Plate

270104799
5999-0310-8067: RNCC: 2 | RNVC: 1
5999-0310-8067: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-056-8623
Pano Ayak

270568623
901-AT-412-A104: RNCC: 2 | RNVC: 1

21 May 2012

5340-27-021-1084
Double Angle Bracket

270211084
7150190: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-5229
Cushioning Pad

270225229
50384045670: RNCC: 2 | RNVC: 1
50384045670: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-27-005-1651
Angle Bracket

270051651
1010002496: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-024-0915
Dust And Moisture Seal Protective Cover

270240915
4.06.18.05: RNCC: 2 | RNVC: 1
1924220105: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-017-3954
Mounting Plate

270173954
1009.1IS.0029-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-4084
Dust And Moisture Seal Protective Plug

270174084
1.HIBM-1I-2045: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-012-4911
Dust And Moisture Seal Protective Cap-Plug

270124911
W 700815 S300: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-013-0520
Retaining Clip

270130520
46540458: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-015-1990
Utility Resilient Mount

270151990
10121HT0216: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-028-6417
Dust And Moisture Seal Protective Plug

270286417
16001YT0304: RNCC: 2 | RNVC: 1

25 Jan 2006

5340-27-043-7826
Air Inlet-Outlet Frame

270437826
ANOMASTAT MENFEZ: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-056-4494
Mounting Plate

270564494
202882: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-035-9845
Retaining Strap

270359845
46844414: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-057-8923
Adaptor

270578923
KCU19-139-7064: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-034-0392
Dust And Moisture Seal Protective Plug

270340392
12B22-08317-AA: RNCC: 2 | RNVC: 1

6 Dec 2006

5340-27-022-2576
Sabit Govd Tekerlek

270222576
9BM 5340-00051: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-040-9411
Dust And Moisture Seal Protective Cover

270409411
M10.5.57: RNCC: 2 | RNVC: 1

11 Apr 2008

5340-27-014-0045
Retaining Clip

270140045
W709427 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-040-4888
Mounting Plate

270404888
11615384: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-015-0512
Mounting Plate

270150512
1010FK-1811637: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-1999
Utility Resilient Mount

270151999
10121HT0231: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-3943
Mounting Plate

270173943
10091IS0030: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-0153
Multiple Angle Bracket

270170153
10131YI0065: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-039-1492
Engine Accessory Bracket

270391492
3838878: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-028-9487
Dust And Moisture Seal Protective Cover

270289487
MD348238: RNCC: 2 | RNVC: 1

17 Feb 2006

5340-27-052-1674
Utility Resilient Mount

270521674
15X200 MM: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-012-4034
Retaining Clip

270124034
120354 ES2: RNCC: 2 | RNVC: 1
98AB9C385BA: RNCC: 2 | RNVC: 1

29 Jan 2002

5340-27-022-2616
Dust And Moisture Seal Protective Cover

270222616
64324MBTD10: RNCC: 2 | RNVC: 1
64324MBTD10: RNCC: 5 | RNVC: 9

20 Feb 2004

5340-27-005-1540
Angle Bracket

270051540
1010000757: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-020-2096
Utility Resilient Mount

270202096
29158T: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-036-5903
Access Door Hinge

270365903
10003660: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-048-5860
Utility Resilient Mount

270485860
MC236202Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-016-7493
Utility Resilient Mount

270167493
46738807: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-043-0176
Cushioning Pad

270430176
40.685.2113: RNCC: 2 | RNVC: 1
40.685.2113: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-025-8119
Nut And Bolt Locking Plate

270258119
901-YK-57: RNCC: 2 | RNVC: 1

13 Apr 2005

5340-27-038-6294
Retaining Clip

270386294
7703077438: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-037-7007
Retaining Clip

270377007
7703077435: RNCC: 2 | RNVC: 1

21 Aug 2007

5340-27-023-7170
Dust And Moisture Seal Protective Cover

270237170
10131YS0768: RNCC: 2 | RNVC: 1

31 Jul 2004

5340-27-054-0916
Dust And Moisture Seal Protective Cover

270540916
107978: RNCC: 2 | RNVC: 2

22 Jul 2011

5340-27-017-7493
Retaining Clamp Assembly

270177493
1010FG-0306102: RNCC: 2 | RNVC: 1

27 Aug 2003

5340-27-044-5795
Utility Resilient Mount

270445795
51.02201-0168: RNCC: 2 | RNVC: 1

18 Feb 2009

5340-27-035-5843
Dust And Moisture Seal Protective Cover

270355843
13C00-08253-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-002-9904
Mounting Bracket

270029904
205-076-230-1: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-057-0671
Ara Parcasi

270570671
901-AT-412-C15: RNCC: 2 | RNVC: 1

14 Jun 2012

5340-27-021-4453
Mounting Plate

270214453
1009.1KI.0221-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3610
Mortise Latch Set

270173610
1009.1IS.0059-8: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-040-5399
Mounting Plate

270405399
C137945: RNCC: 2 | RNVC: 1

29 Jan 2008

5340-27-022-7100
Mortise Latch Set

270227100
9279 22: RNCC: 2 | RNVC: 1

10 Apr 2004

5340-27-051-5454
Protection Bellows

270515454
6C46E600C96 AA: RNCC: 2 | RNVC: 1

5 Nov 2010

5340-27-032-8140
Dust And Moisture Seal Protective Cover

270328140
13D00-58206-AB: RNCC: 2 | RNVC: 1

19 Sep 2006

5340-27-051-4835
Dust And Moisture Seal Protective Cover

270514835
897179778051: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-009-7751
Retaining Clip

270097751
81.97410.0001: RNCC: 2 | RNVC: 1

5 Sep 2001

5340-27-022-9583
Utility Resilient Mount

270229583
40V1610200: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-010-5587
Manual Control Handle

270105587
98VT V24184 ABW: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-012-4502
Retaining Clip

270124502
7703081086: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-013-1773
Retaining Clip

270131773
7658002: RNCC: 2 | RNVC: 1

9 May 2002

5340-27-021-0569
Mounting Plate

270210569
1010FG-0000612: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-6842
Retaining Clip

270166842
6555 ZQ: RNCC: 2 | RNVC: 1
13D00-08813-AA: RNCC: 2 | RNVC: 1

27 Feb 2003

5340-27-052-1190
Tutucu

270521190
1010FK-0604446: RNCC: 2 | RNVC: 1

21 Dec 2010

5340-27-037-3429
Retaining Clip

270373429
7766198: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-007-4317
Headless Straight Rod

270074317
G33378: RNCC: 2 | RNVC: 1

10 Nov 1999

5340-27-005-1812
Headless Straight Rod

270051812
1010002247: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-056-3568
Dust And Moisture Seal Protective Cap-Plug

270563568
3831537: RNCC: 2 | RNVC: 2
3831537: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-27-044-5398
Mounting Plate

270445398
BA4-0631-000000: RNCC: 2 | RNVC: 1
BA4-0631-000000: RNCC: 5 | RNVC: 9

13 Feb 2009

5340-27-020-3368
Ayarlama Parcasi

270203368
S-2: RNCC: 2 | RNVC: 1

3 Dec 2003

5340-27-044-3129
Retaining Strap

270443129
GGAS 003: RNCC: 2 | RNVC: 1

26 Jan 2009

5340-27-043-4841
Manual Control Lever

270434841
051353H: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-009-3714
Adaptor Plaka

270093714
6009-0524-1003: RNCC: 2 | RNVC: 1
6009-0524-1003: RNCC: 2 | RNVC: 1

22 Jun 2001

5340-27-003-8300
Electronic Equipment Hardware Kit

270038300
3522-1430-4840: RNCC: 2 | RNVC: 1
3522-1430-4840: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-048-7438
Mounting Plate

270487438
9034-08: RNCC: 2 | RNVC: 1
9034-08: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-022-5141
Mounting Plate

270225141
9BM 5340-00080: RNCC: 2 | RNVC: 1

18 Mar 2004

5340-27-032-6375
Mounting Plate

270326375
T532-G4000-350: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-028-2436
Clamping Catch Fastener

270282436
73B00-57031-AA: RNCC: 2 | RNVC: 1

15 Dec 2005

5340-27-023-2665
Nut And Bolt Locking Plate

270232665
1934210209: RNCC: 2 | RNVC: 1
4.05.19.02: RNCC: 2 | RNVC: 1

12 Jun 2004

5340-27-010-0068
Mounting Plate

270100068
938315-1: RNCC: 2 | RNVC: 1
938315-1: RNCC: 2 | RNVC: 1

19 Oct 2001

5340-27-006-8876
Mounting Plate

270068876
A 383 640 00 11: RNCC: 2 | RNVC: 1

9 Jun 1999

5340-27-026-9216
Push Door Plate

270269216
1010FK-1809781-1: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-012-1247
Dust And Moisture Seal Protective Plug

270121247
E852076 S: RNCC: 2 | RNVC: 1

14 Jan 2002

5340-27-052-2144
Mounting Plate

270522144
1010FK-1301002-2: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-058-3193
Grooved Clamp Coupling Sleeve

270583193
200970: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-015-5301
Utility Resilient Mount

270155301
10131YT0568: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-029-1205
Dust And Moisture Seal Protective Plug

270291205
LYQ100050: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-039-1490
Engine Accessory Bracket

270391490
3839009: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-059-0945
Kapak

270590945
CZT-002: RNCC: 2 | RNVC: 1

24 May 2013

5340-27-021-5225
Retaining Clamp Assembly

270215225
1009.1KI.0127-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6738
Mounting Plate

270186738
1010FK-2704041: RNCC: 2 | RNVC: 1
255-01-15: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-9501
Kapak Komple

270599501
1010FMA-0100134-10: RNCC: 2 | RNVC: 1

12 Dec 2013

5340-27-058-0012
Retaining Clip

270580012
90655-MB1-921: RNCC: 2 | RNVC: 1

29 Nov 2012

5340-27-033-6321
Double Angle Bracket

270336321
40-205-3593: RNCC: 2 | RNVC: 1
40-205-3593: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-057-6829
Retaining Strap

270576829
083-006000-001: RNCC: 2 | RNVC: 1

24 Sep 2012

5340-27-021-1307
Utility Resilient Mount

270211307
1009.1KI.0264-2*2-6.1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-0407
Den Yuvarlak Takoz

270450407
302494: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-019-5678
Buckle

270195678
05001HT0229: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-6504
Mounting Plate

270256504
10417: RNCC: 2 | RNVC: 1

25 Mar 2005

5340-27-053-1147
Retaining Strap

270531147
102090-350: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-013-1679
Dust And Moisture Seal Protective Plug

270131679
81.96410.0671: RNCC: 2 | RNVC: 1

9 May 2002

5340-27-006-1892
Elbow Catch

270061892
2K56168: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-023-5135
Spring Holder

270235135
05001FT0069: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-056-4262
Retaining Bail

270564262
1HZ0000084: RNCC: 2 | RNVC: 1

28 Mar 2012

5340-27-052-8705
Retaining Clip

270528705
77 03 016 594: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-27-005-1539
Angle Bracket

270051539
1010000682: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-7940
Angle Bracket

270047940
10091YA5088: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-004-7998
Mounting Bracket

270047998
10091YC5008: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-006-1889
Retaining Strap

270061889
2K10620: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-006-8658
Dust And Moisture Seal Protective Cap

270068658
466963-6: RNCC: 2 | RNVC: 1

27 May 1999

5340-27-017-3269
Mounting Plate

270173269
MP000804: RNCC: 2 | RNVC: 1

17 Jun 2003

5340-27-021-2871
Casement Fastener

270212871
1009.1KI.0250-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-9816
Modifiye Edil Rack

270089816
10004274: RNCC: 2 | RNVC: 1

20 Mar 2001

5340-27-021-2852
Utility Resilient Mount

270212852
1009.1KI.0264-2*2-3.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-046-0659
Mounting Plate

270460659
T570-H6500-200: RNCC: 2 | RNVC: 1

3 Jul 2009

5340-27-045-5799
Retaining Clamp Assembly

270455799
RESIM NO:102-M265/2900-006-000 -: RNCC: 2 | RNVC: 1

15 May 2009

5340-27-027-9439
Mounting Plate

270279439
6040-0529-7018: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-050-8841
Metal Aksam

270508841
62X-4380H-00: RNCC: 2 | RNVC: 2

7 Sep 2010

5340-27-009-4833
Helical Compression Spring Seat

270094833
46453377: RNCC: 2 | RNVC: 1

12 Jul 2001

5340-27-015-6978
Mounting Plate

270156978
10091KI0340: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-016-3640
Retaining Clip

270163640
7703079022: RNCC: 2 | RNVC: 1

7 Jan 2003

5340-27-051-5567
Manual Control Handle

270515567
6C467213 AA: RNCC: 2 | RNVC: 1

5 Nov 2010

5340-27-025-2674
Kemere Takmak Aski

270252674
YTE.026.E.02.06: RNCC: 2 | RNVC: 1

15 Feb 2005

5340-27-008-5065
Gergi Plakasi

270085065
599903128112: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-017-4078
Manual Control Lever

270174078
1009.1IS.0068-A/6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-026-7034
Protection Bellows

270267034
MB243857: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-054-7895
Retaining Strap

270547895
102091-455: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-014-1456
Utility Resilient Mount

270141456
16001YT0073: RNCC: 2 | RNVC: 1
05001DT0051: RNCC: 2 | RNVC: 1

16 Sep 2002

5340-27-050-7675
Utility Resilient Mount

270507675
13C45-32063-AA: RNCC: 3 | RNVC: 2

25 Aug 2010

5340-27-054-2954
Dust And Moisture Seal Protective Plug

270542954
6112080: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-055-4171
Utility Resilient Mount

270554171
5095551: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-008-8955
Spring Tension Clip

270088955
98000277: RNCC: 2 | RNVC: 1

12 Feb 2001

5340-27-055-2603
Mounting Plate

270552603
UG 045000 POZ-16: RNCC: 2 | RNVC: 1
UG 045000 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-050-8400
Manual Control Lever

270508400
6H5-43181-03: RNCC: 3 | RNVC: 2
6H5-43181-03: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-048-3050
Kol

270483050
73-3554-0079: RNCC: 2 | RNVC: 1

28 Jan 2010

5340-27-021-1311
Utility Resilient Mount

270211311
1009.1KI.0181-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-5527
Spring Holder

270445527
BT2-6113-000000: RNCC: 2 | RNVC: 1
BT2-6113-000000: RNCC: 5 | RNVC: 9

16 Feb 2009

5340-27-057-8906
Takma-Sokme Aparat

270578906
TD120812/1: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-055-4955
Extension Drawer Slide

270554955
Z005-000001-01: RNCC: 2 | RNVC: 9

8 Dec 2011

5340-27-024-1760
Dust And Moisture Seal Boot

270241760
10509: RNCC: 2 | RNVC: 1
205-040-176-7: RNCC: 2 | RNVC: 1

24 Sep 2004

5340-27-008-9271
Retaining Clip

270089271
7739382: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-028-4472
Lock-Release Lever

270284472
71B21-60982-AA: RNCC: 2 | RNVC: 1

2 Jan 2006

5340-27-038-3378
Engine Accessory Bracket

270383378
475888-4: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-051-4362
Mounting Plate

270514362
1010FMA-0100132-41: RNCC: 2 | RNVC: 1

26 Oct 2010

5340-27-034-6831
Dust And Moisture Seal Protective Cover

270346831
13C01-05105-AA: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-020-9940
Dust And Moisture Seal Protective Cap-Plug

270209940
1206KDK1058: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-6452
Mounting Plate

270196452
05001HP0010: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-0275
Dust And Moisture Seal Protective Cover

270380275
1587694: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-053-1039
Retaining Strap

270531039
103075-350: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-038-5083
Headless Straight Rod

270385083
7701472087: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-010-5720
Retaining Clip

270105720
83BB A26480 AA: RNCC: 2 | RNVC: 1

4 Dec 2001

5340-27-039-3126
Retaining Clip

270393126
7701476890: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-049-8542
Utility Resilient Mount

270498542
103982: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-040-9529
Dust And Moisture Seal Protective Cover

270409529
MK516468: RNCC: 2 | RNVC: 1

14 Apr 2008

5340-27-034-5929
Dust And Moisture Seal Protective Plug

270345929
13C02-05096-AA: RNCC: 2 | RNVC: 1

25 Jan 2007

5340-27-055-5620
Stoper

270555620
83A19-61972-AA: RNCC: 2 | RNVC: 1

12 Dec 2011

5340-27-020-3117
Yatak Kapak

270203117
4121PR0054: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-019-0348
Dust And Moisture Seal Protective Cap Set

270190348
M0102-F04: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-9214
Nut And Bolt Locking Plate

270349214
40-270-1003: RNCC: 2 | RNVC: 1
40-270-1003: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-008-2253
Mounting Plate

270082253
6004-1313-3002: RNCC: 2 | RNVC: 1
6004-1313-3002: RNCC: 2 | RNVC: 1

11 Aug 2000

5340-27-036-8897
Engine Accessory Bracket

270368897
422323-6: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-059-3952
Montaj Ayak

270593952
2.HIBM-4H-0666/4/G-0004 L: RNCC: 2 | RNVC: 1

26 Jul 2013

5340-27-044-9663
Retaining Clip

270449663
MR374404: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-003-9233
Manual Control Lever

270039233
300-110: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-053-8460
Headless Straight Rod

270538460
C171-000060: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-028-7677
Dust And Moisture Seal Protective Cover

270287677
884-5810-943: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-044-0251
Retaining Strap

270440251
Y532-66031-205: RNCC: 2 | RNVC: 1

29 Dec 2008

5340-27-058-2012
Utility Resilient Mount

270582012
63108-ZY3-000: RNCC: 2 | RNVC: 1

20 Dec 2012

5340-27-055-2001
Mounting Plate

270552001
UG 050000 POZ-12: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-055-5621
Stoper

270555621
83A19-61880-AA: RNCC: 2 | RNVC: 1

12 Dec 2011

5340-27-008-0298
Metal Olmaya Tampon

270080298
8556434: RNCC: 2 | RNVC: 1

7 Jun 2000

5340-27-009-4512
Dust And Moisture Seal Protective Cover

270094512
6015-0500-0255: RNCC: 2 | RNVC: 1
6015-0500-0255: RNCC: 2 | RNVC: 1

6 Jul 2001

5340-27-008-0805
Mounting Plate

270080805
3522-1430-3730: RNCC: 2 | RNVC: 1
3522-1430-3730: RNCC: 2 | RNVC: 1

27 Jun 2000

5340-27-007-9128
Double Angle Bracket

270079128
10131YC0137: RNCC: 2 | RNVC: 1

19 Apr 2000

5340-27-007-5003
Retaining Clip

270075003
3B74101: RNCC: 2 | RNVC: 1

2 Dec 1999

5340-27-014-0029
Retaining Clip

270140029
W703735 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-022-8321
Helical Compression Spring Seat

270228321
05001FY0042: RNCC: 2 | RNVC: 1

23 Apr 2004

5340-27-028-4123
Retaining Clip

270284123
14631687: RNCC: 2 | RNVC: 1

29 Dec 2005

5340-27-009-4388
Data Entry Keyboard

270094388
TUS TAKIMI: RNCC: 2 | RNVC: 1

5 Jul 2001

5340-27-050-3627
Access Door Hinge

270503627
25656: RNCC: 2 | RNVC: 1

21 Jul 2010

5340-27-023-0101
Dust And Moisture Seal Protective Cover

270230101
20788T: RNCC: 2 | RNVC: 1

12 May 2004

5340-27-037-2034
Engine Accessory Bracket

270372034
11030747: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-013-3410
Retaining Bail

270133410
6030-0532-9017: RNCC: 2 | RNVC: 1
6030-0532-9017: RNCC: 2 | RNVC: 1

5 Jun 2002

5340-27-042-3112
Protection Bellows

270423112
6C113K036AC: RNCC: 2 | RNVC: 1

7 Aug 2008

5340-27-015-6981
Mounting Plate

270156981
10091KI0360: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-012-1888
Double Angle Bracket

270121888
10131YS0923: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-021-5029
Manual Control Lever

270215029
1009.1KI.0237-2: RNCC: 2 | RNVC: 1
1009.1KI.0347-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-8596
Dust And Moisture Seal Protective Plug

270458596
73A15-61648-AA: RNCC: 2 | RNVC: 1

16 Jun 2009

5340-27-007-2482
Mounting Plate

270072482
3153713-1: RNCC: 2 | RNVC: 1

20 Feb 2002

5340-27-042-9482
Line Supporting Strap

270429482
40.205.4266: RNCC: 2 | RNVC: 1
40.205.4266: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-014-6531
Hand Carrying Strap Assembly

270146531
8115-4511-0004: RNCC: 2 | RNVC: 1
8115-4511-0004: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-055-1814
Utility Resilient Mount

270551814
55RS752673: RNCC: 2 | RNVC: 2

18 Nov 2011

5340-27-050-8143
Retaining Clamp Assembly

270508143
13C45-32051-AA: RNCC: 2 | RNVC: 1

1 Sep 2010

5340-27-040-2106
Retaining Clip

270402106
82477422: RNCC: 2 | RNVC: 1

14 Jan 2008

5340-27-020-2847
Protection Bellows

270202847
P12: RNCC: 2 | RNVC: 1

21 Nov 2003

5340-27-057-1848
Mounting Plate

270571848
10061781: RNCC: 2 | RNVC: 1

29 Jun 2012

5340-27-054-8024
Utility Resilient Mount

270548024
202870: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-043-8819
Air Inlet-Outlet Frame

270438819
MENFEZ, 500X250MM.: RNCC: 2 | RNVC: 1

19 Dec 2008

5340-27-009-8084
Manual Control Lever

270098084
07002YK0195: RNCC: 2 | RNVC: 1

11 Sep 2001

5340-27-013-5927
Headless Straight Rod

270135927
98VW 19E622 AA: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-055-7234
Retaining Clip

270557234
14227874: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-018-3053
Utility Resilient Mount

270183053
27A-03-YPIM69: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-4585
Metal Olmay Tampon

270144585
98AB 9D690 AB: RNCC: 2 | RNVC: 1
13C00-32063-AA: RNCC: 2 | RNVC: 1
YC1W-4684-AA: RNCC: 2 | RNVC: 1

16 Oct 2002

5340-27-032-2699
Plastik Seperator

270322699
72A08-35309-AA: RNCC: 2 | RNVC: 1

13 Jun 2006

5340-27-046-4694
Utility Resilient Mount

270464694
MOTOR-DINAMO TAKOZU: RNCC: 2 | RNVC: 1

14 Aug 2009

5340-27-058-5347
Mounting Plate

270585347
920-8191/01: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-058-1201
Dust And Moisture Seal Protective Cover

270581201
50111-ZY3-020: RNCC: 2 | RNVC: 1

12 Dec 2012

5340-27-052-8197
Mounting Plate

270528197
1010FK-1911465-1: RNCC: 2 | RNVC: 1

28 Feb 2011

5340-27-053-5017
Retaining Strap

270535017
AK-70121T: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-020-3957
Pim Mentese

270203957
M0106A-F17: RNCC: 2 | RNVC: 1

4 Dec 2003

5340-27-057-0107
Headless Straight Rod

270570107
98001093-7: RNCC: 2 | RNVC: 1

8 Jun 2012

5340-27-012-4567
Retaining Clip

270124567
W 703963: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-015-6984
Mounting Plate

270156984
10091YB0230: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-037-2065
Engine Accessory Bracket

270372065
3586320: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-032-2861
Permanent Magnet

270322861
71B21-73277-AA: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-026-8871
Dust And Moisture Seal Protective Plug

270268871
W700833S1300: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-040-1663
Dust And Moisture Seal Protective Cover

270401663
897349992051: RNCC: 2 | RNVC: 1

9 Jan 2008

5340-27-003-9199
Bail Handle

270039199
07001MN0027: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-016-3306
Spring Tension Clip

270163306
7703076006: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-026-3279
Retaining Clip

270263279
MB113038: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-020-2098
Utility Resilient Mount

270202098
2952371: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-052-1677
Utility Resilient Mount

270521677
75X200 MM: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-042-9907
Nut And Bolt Locking Plate

270429907
40.626.0133: RNCC: 2 | RNVC: 1
40.626.0133: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-022-9871
Helical Compression Spring Seat

270229871
1010FK-0000326: RNCC: 2 | RNVC: 1

11 May 2004

5340-27-059-2778
Hand Carrying Strap Assembly

270592778
5340-TJ1-10533: RNCC: 2 | RNVC: 1

4 Jul 2013

5340-27-050-8003
Dust And Moisture Seal Protective Cover

270508003
501-03-01-01-03-307: RNCC: 2 | RNVC: 2
501-03-01-01-03-307: RNCC: 2 | RNVC: 2

31 Aug 2010

5340-27-048-7662
Access Hole Frame

270487662
6810-21: RNCC: 2 | RNVC: 1
6810-21: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-058-4662
Komples Kapi Kilit

270584662
MESAN 070 DIN EN ISO 1043-1 PA6-: RNCC: 5 | RNVC: 9

4 Feb 2013

5340-27-058-0529
Dust And Moisture Seal Protective Cover

270580529
24836-ZV5-000: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-035-8788
Retaining Strap

270358788
SET 125 06/1: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-040-5197
Baglama Kanal

270405197
11674565-1: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-058-2215
Dust And Moisture Seal Protective Plug

270582215
105019-9: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-021-4430
Mounting Plate

270214430
1009.1KI.0358-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-0069
Metal Olmay Tampon

270140069
894118510401: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-012-9958
Retaining Clip

270129958
46542453: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-019-3958
Access Door Hinge

270193958
10091MM0488: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-8790
Protection Bellows

270088790
2K87792: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-036-0408
Double Angle Bracket

270360408
1.HIBM-1I-2569: RNCC: 2 | RNVC: 1

20 Apr 2007

5340-27-017-3667
Dust And Moisture Seal Protective Plug

270173667
1.HIBM-1I-2025: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-057-2303
Tutucu

270572303
8-004-0007-11: RNCC: 2 | RNVC: 1

6 Jul 2012

5340-27-033-9088
Flans

270339088
7307979: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-044-8335
Retaining Bail

270448335
02008-TRS-10-0002-02: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-27-021-4119
Mounting Plate

270214119
1009.1KI.0266-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-3690
Utility Resilient Mount

270263690
16535-0D031: RNCC: 2 | RNVC: 1

4 Jul 2005

5340-27-003-7988
Mounting Plate

270037988
6040-0516-4003: RNCC: 2 | RNVC: 1
6040-0516-4003: RNCC: 3 | RNVC: 1

28 Oct 1994

5340-27-025-3099
Pim Mentese

270253099
5040-ATF-0180: RNCC: 2 | RNVC: 1

23 Feb 2005

5340-27-020-0045
Helical Compression Spring Seat

270200045
03035600: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-8374
Baglanti Elamani

270498374
7335794069: RNCC: 2 | RNVC: 1
89-53: RNCC: 2 | RNVC: 1

4 Jun 2010

5340-27-020-8701
Double Angle Bracket

270208701
1010FG-0000391: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7185
Mounting Bracket

270017185
TM55-1520-210-3205-030-178-003: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-021-5605
Antipilferage Seal

270215605
KURSUN MUHUR: RNCC: 2 | RNVC: 1

16 Dec 2003

Load More Results