What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 45 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 45 of 53

5340-27-050-8419
Manual Control Lever

270508419
6J8-43616-10: RNCC: 3 | RNVC: 2
6J8-43616-10: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-052-8784
Door Handle

270528784
901-KK-235: RNCC: 2 | RNVC: 1

3 Mar 2011

5340-27-035-9860
Mounting Plate

270359860
10025917-3: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-020-7875
Utility Resilient Mount

270207875
1009.1KI.0220-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8112
Mounting Plate

270278112
1501502065: RNCC: 2 | RNVC: 1
111T420-03: RNCC: 3 | RNVC: 1

8 Nov 2005

5340-27-039-3230
Dust And Moisture Seal Protective Cover

270393230
20581617: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-013-1936
Mounting Plate

270131936
6040-0532-8028: RNCC: 2 | RNVC: 1
6040-0532-8028: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-015-8141
Komples Kapi Kilit

270158141
02TM03PK02005: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-017-0086
Spacing Threaded Standoff

270170086
6005-0532-8005: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-002-9895
Mounting Bracket

270029895
205-075-124-003: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-044-5554
Kapak

270445554
L-0210-835: RNCC: 2 | RNVC: 1
L-0210-835: RNCC: 5 | RNVC: 9

17 Feb 2009

5340-27-018-2198
Spring Tension Clip

270182198
27549: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-022-6340
Handwheel

270226340
8267747: RNCC: 2 | RNVC: 1

1 Apr 2004

5340-27-009-5553
Handwheel

270095553
RSY-000KK801006-07: RNCC: 2 | RNVC: 1

24 Jul 2001

5340-27-054-5106
Dust And Moisture Seal Protective Cap

270545106
MN-7560-0096: RNCC: 2 | RNVC: 2

21 Sep 2011

5340-27-049-5532
Kontrol Kol

270495532
619-060-042: RNCC: 2 | RNVC: 1

7 May 2010

5340-27-049-5770
Tapa

270495770
10091YC7017: RNCC: 2 | RNVC: 1

11 May 2010

5340-27-034-1075
Ara Parcasi

270341075
2ABEP00057: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-059-3380
Dust And Moisture Seal Protective Cover

270593380
10082497: RNCC: 2 | RNVC: 1

17 Jul 2013

5340-27-003-9228
Buckle

270039228
07002YT0102: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-052-3144
Helical Compression Spring Seat

270523144
105627: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-27-040-7921
Retaining Clip

270407921
MK482388: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-042-1537
Aircraft Latch Hook

270421537
M522D260900000: RNCC: 2 | RNVC: 1

22 Jul 2008

5340-27-022-9364
Utility Resilient Mount

270229364
40V1510200: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-054-1559
Sac Mahfaza

270541559
40-008.00/10-127: RNCC: 2 | RNVC: 1

2 Aug 2011

5340-27-050-1973
Dust And Moisture Seal Protective Cover

270501973
79C00-36870-AA: RNCC: 3 | RNVC: 2

6 Jul 2010

5340-27-059-8759
Mounting Plate

270598759
6040-4037-3097: RNCC: 2 | RNVC: 1

27 Nov 2013

5340-27-041-5786
Adaptor Tutucu

270415786
FMFM17600A: RNCC: 2 | RNVC: 1

4 Jun 2008

5340-27-017-3995
Mounting Plate

270173995
1009.1IS.0061-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-4411
Mounting Plate

270214411
1009.1KI.0116-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-9082
Headless Grooved Rod

270089082
ZLB39346: RNCC: 2 | RNVC: 1

16 Feb 2001

5340-27-026-0161
Dust And Moisture Seal Protective Cover

270260161
897148116051: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-045-4953
Manual Control Handle

270454953
2410A007XA: RNCC: 3 | RNVC: 2

12 May 2009

5340-27-053-3513
Mounting Plate

270533513
H341111103: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-028-3997
Sabitleme Mandal

270283997
8X8X14 MM: RNCC: 2 | RNVC: 1

28 Dec 2005

5340-27-037-0714
Dust And Moisture Seal Protective Cover

270370714
R3513260: RNCC: 2 | RNVC: 1

12 Jul 2007

5340-27-037-4613
Retaining Clamp Assembly

270374613
968124: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-058-4785
Dayama

270584785
23 V32 232 00: RNCC: 2 | RNVC: 1

8 Feb 2013

5340-27-054-4016
Dust And Moisture Seal Protective Plug

270544016
AK-91012T: RNCC: 2 | RNVC: 2

6 Sep 2011

5340-27-050-9047
Retaining Clip

270509047
63D-48118-00: RNCC: 2 | RNVC: 2

14 Sep 2010

5340-27-045-5930
Mapa

270455930
1010006682: RNCC: 2 | RNVC: 1

15 May 2009

5340-27-048-2673
Kilit Dili

270482673
269.07.1: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-046-1662
Retaining Strap

270461662
1.HIBM-1I-2875T01: RNCC: 2 | RNVC: 1

15 Jul 2009

5340-27-045-1113
Retaining Clip

270451113
4605A054: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-057-1899
Runner

270571899
13C33-70080-AA: RNCC: 2 | RNVC: 1

29 Jun 2012

5340-27-006-4175
Hand Carrying Strap Assembly

270064175
6030.0850.7001: RNCC: 2 | RNVC: 1
6030 0850 7001: RNCC: 2 | RNVC: 1

11 Mar 1999

5340-27-015-0475
Mounting Plate

270150475
1010FK-1811419: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6779
Dust And Moisture Seal Protective Plug

270156779
05001FT0004: RNCC: 2 | RNVC: 1
ERA273: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-009-5936
Threaded Rod End

270095936
07002YM0167: RNCC: 2 | RNVC: 1

31 Jul 2001

5340-27-004-5561
Mounting Bracket

270045561
10091YT5011: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-044-7984
Retaining Clip

270447984
MU481187: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-044-9654
Retaining Clip

270449654
MN167775: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-022-4566
Cushioning Pad

270224566
77206MJ0000: RNCC: 2 | RNVC: 1
77206MJ0000: RNCC: 5 | RNVC: 9

11 Mar 2004

5340-27-017-4068
Access Door Hinge

270174068
1009.1IS.0059-5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-036-0409
Double Angle Bracket

270360409
1.HIBM-1I-2567: RNCC: 2 | RNVC: 1

20 Apr 2007

5340-27-005-1658
Double Angle Bracket

270051658
1010000019: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-5769
Tapa

270495769
10091YC7016: RNCC: 2 | RNVC: 1

11 May 2010

5340-27-014-0009
Retaining Clip

270140009
W708646 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-036-4060
Dust And Moisture Seal Protective Plug

270364060
735337393: RNCC: 2 | RNVC: 1

31 May 2007

5340-27-033-8787
Utility Resilient Mount

270338787
7B79327: RNCC: 2 | RNVC: 1

27 Nov 2006

5340-27-048-2953
Dust And Moisture Seal Protective Cover

270482953
185101198: RNCC: 2 | RNVC: 1

27 Jan 2010

5340-27-047-2213
Dust And Moisture Seal Protective Cover

270472213
13C00-58510-AA: RNCC: 2 | RNVC: 1

12 Nov 2009

5340-27-046-7443
Takma-Sokme Aparat

270467443
308-700: RNCC: 2 | RNVC: 1

5 Oct 2009

5340-27-014-2607
Metal Olmay Tampon

270142607
8K35236: RNCC: 2 | RNVC: 1

3 Oct 2002

5340-27-044-5709
Tutucu

270445709
102-320: RNCC: 2 | RNVC: 1
102-320: RNCC: 5 | RNVC: 9

17 Feb 2009

5340-27-035-5594
Engine Accessory Bracket

270355594
3836068: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-039-8628
Engine Accessory Bracket

270398628
20586869: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-011-8215
Dust And Moisture Seal Protective Cap

270118215
8C-185: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-013-1919
Dust And Moisture Seal Protective Cap

270131919
6009-0516-4030: RNCC: 2 | RNVC: 1
6009-0516-4030: RNCC: 2 | RNVC: 1

10 May 2002

5340-27-012-9972
Retaining Clip

270129972
7688345: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-038-0278
Dust And Moisture Seal Protective Cover

270380278
1542242: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-036-7633
Headless Straight Rod

270367633
C71A40: RNCC: 2 | RNVC: 1

25 Jun 2007

5340-27-013-4794
Spring Holder

270134794
53RS200183: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-012-2169
Retaining Clip

270122169
89FG A044C62 EA: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-026-7406
Dust And Moisture Seal Protective Cover

270267406
MB886523: RNCC: 2 | RNVC: 1

26 Jul 2005

5340-27-009-4101
Dust And Moisture Seal Protective Cover

270094101
10131YK0194: RNCC: 2 | RNVC: 1

29 Jun 2001

5340-27-033-6979
Utility Resilient Mount

270336979
7700795162: RNCC: 2 | RNVC: 1

14 Nov 2006

5340-27-004-7919
Mounting Bracket

270047919
10091YD5037: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-021-3028
Protection Bellows

270213028
10131MC0969: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-7661
Multiple Angle Bracket

270077661
10131YBS0107: RNCC: 2 | RNVC: 1
10131YBS0107: RNCC: 5 | RNVC: 2

11 Feb 2000

5340-27-032-4653
Buckle

270324653
11051YT0045: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-057-6083
Dust And Moisture Seal Protective Cover

270576083
ALTFC01287: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-043-8216
Sliding Door Track Bracket

270438216
58RS110499: RNCC: 2 | RNVC: 1

17 Dec 2008

5340-27-012-5511
Dust And Moisture Seal Protective Plug

270125511
7700866729: RNCC: 2 | RNVC: 1
7701045902: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-015-1993
Utility Resilient Mount

270151993
10121HT0219: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-029-8346
Dust And Moisture Seal Protective Cover

270298346
46773346: RNCC: 2 | RNVC: 1

29 May 2006

5340-27-045-1666
Headless Straight Rod

270451666
A1403300003: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-27-039-8346
Utility Resilient Mount

270398346
6013260340: RNCC: 2 | RNVC: 1

24 Dec 2007

5340-27-044-9671
Retaining Clip

270449671
MU000573: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-044-9649
Retaining Clip

270449649
MR288150: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-024-6429
Utility Resilient Mount

270246429
71A25-03540-AB: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-055-2602
Mounting Plate

270552602
UG 037500 POZ-16: RNCC: 2 | RNVC: 1
UG 037500 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-058-4535
Mounting Plate

270584535
1010FMA-1901211: RNCC: 2 | RNVC: 1

1 Feb 2013

5340-27-039-3863
Grooved Clamp Coupling

270393863
0310P19: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-012-4531
Retaining Clip

270124531
7700788732: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-018-6890
Mounting Plate

270186890
1010FK-1805534: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-8741
Dust And Moisture Seal Protective Cover

270368741
1543965: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-012-4495
Retaining Clip

270124495
E31492S: RNCC: 2 | RNVC: 1
E864842: RNCC: 2 | RNVC: 1
897089536051: RNCC: 2 | RNVC: 1

30 Jan 2002

5340-27-005-1522
Angle Bracket

270051522
1010000320: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-018-8649
Retaining Bail

270188649
11051DK0010: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-8554
Hydraulic Ram Support

270498554
108616: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-055-8833
Muhafaza

270558833
38613: RNCC: 2 | RNVC: 1

12 Jan 2012

5340-27-038-1133
Mounting Plate

270381133
111T421-04: RNCC: 3 | RNVC: 1

14 Sep 2007

5340-27-035-5282
Retaining Clip

270355282
4018475: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-040-7905
Retaining Clip

270407905
MH020907: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-040-4127
Mounting Plate

270404127
11615405: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-013-6086
Lock-Release Lever

270136086
88.62941.6004: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-045-4285
Utility Resilient Mount

270454285
MB356104: RNCC: 3 | RNVC: 2

7 May 2009

5340-27-049-5082
Utility Resilient Mount

270495082
107267: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-027-3141
Dust And Moisture Seal Protective Cap-Plug

270273141
W700029S300: RNCC: 2 | RNVC: 1

26 Sep 2005

5340-27-000-1492
Compression Helical Spring

270001492
A7-200: RNCC: 2 | RNVC: 1
A7-200: RNCC: 3 | RNVC: 2

27 May 2004

5340-27-022-6439
Utility Resilient Mount

270226439
12031-2231: RNCC: 2 | RNVC: 1

2 Apr 2004

5340-27-022-2414
Dust And Moisture Seal Protective Cover

270222414
35856KBG007: RNCC: 2 | RNVC: 1
35856KBG007: RNCC: 5 | RNVC: 9

19 Feb 2004

5340-27-028-5664
Retaining Clip

270285664
130958208: RNCC: 2 | RNVC: 1

17 Jan 2006

5340-27-029-2957
Dust And Moisture Seal Protective Cover

270292957
81.91710.0525: RNCC: 2 | RNVC: 1

20 Mar 2006

5340-27-043-9086
Dust And Moisture Seal Protective Cover

270439086
02011010023: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-035-8169
Dust And Moisture Seal Protective Plug

270358169
948812: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-045-7502
Double Angle Bracket

270457502
10029185: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-054-3156
Bracket

270543156
20536731: RNCC: 2 | RNVC: 2
20536731: RNCC: 5 | RNVC: 9

17 Aug 2011

5340-27-013-9803
Mounting Plate

270139803
6040-0522-0018: RNCC: 2 | RNVC: 1
6040-0522-0018: RNCC: 2 | RNVC: 1

21 Aug 2002

5340-27-055-2157
Mounting Plate

270552157
1692-0233: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-048-2276
Utility Resilient Mount

270482276
51RS370153: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-009-1875
Retaining Clip

270091875
7701201687: RNCC: 2 | RNVC: 1

18 May 2001

5340-27-005-1671
Mounting Bracket

270051671
1010000262: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-018-2550
Manual Control Handle

270182550
98013182: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-052-9172
Retaining Strap

270529172
99 69 470 98R: RNCC: 2 | RNVC: 2

8 Mar 2011

5340-27-038-3331
Engine Accessory Bracket

270383331
1556797: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-018-0462
Mounting Plate

270180462
98012867: RNCC: 2 | RNVC: 1

24 Oct 2003

5340-27-024-4086
Retaining Strap

270244086
1010FK-1813263: RNCC: 2 | RNVC: 1
MT500130008: RNCC: 2 | RNVC: 1

21 Oct 2004

5340-27-056-9609
Birlestirme Parcasi

270569609
9BM 5340-00204: RNCC: 2 | RNVC: 1

4 Jun 2012

5340-27-005-5900
Spring Holder

270055900
93VT-2472-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-037-8667
Buckle

270378667
69454-31K00: RNCC: 5 | RNVC: 9

31 Aug 2007

5340-27-006-4189
Resilient Mount Adapter

270064189
10000269: RNCC: 2 | RNVC: 1

11 Mar 1999

5340-27-053-4008
Mounting Plate

270534008
H349003056: RNCC: 2 | RNVC: 1
M3440835: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-043-4776
Flush Bolt

270434776
DUZ SURGU,7CM: RNCC: 2 | RNVC: 1

13 Nov 2008

5340-27-040-3941
Metal Takoz

270403941
8389641: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-016-3275
Retaining Strap

270163275
46737756: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-035-8997
Runner

270358997
1010FK-1911310: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-057-1677
Dust And Moisture Seal Boot

270571677
55RS860741: RNCC: 2 | RNVC: 1

27 Jun 2012

5340-27-029-1452
Retaining Clip

270291452
1010005551: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-018-6877
Cushioning Pad

270186877
1010FG-1804492: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-5009
Retaining Clip

270075009
3B83939: RNCC: 2 | RNVC: 1

2 Dec 1999

5340-27-056-6610
Mounting Plate

270566610
MM-7412-0033: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-029-0253
Runner

270290253
72A15-62114-AA: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-015-1992
Utility Resilient Mount

270151992
10121HT0218: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8372
Access Door Hinge

270158372
02TMO8ZMO1002: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-017-3967
Mounting Plate

270173967
1009.1IS.0048-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-057-4075
Friction Catch

270574075
05001HS0065: RNCC: 5 | RNVC: 9

2 Aug 2012

5340-27-055-7014
Dust And Moisture Seal Protective Cover

270557014
5095554: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-27-050-0219
Dust And Moisture Seal Protective Cover

270500219
898058238051: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-048-9870
Dust And Moisture Seal Protective Cover

270489870
103688: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-040-3546
Dust And Moisture Seal Protective Plug

270403546
7701062156: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-045-1133
Retaining Clip

270451133
MN145861: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-022-4293
Headless Straight Rod

270224293
18132T: RNCC: 2 | RNVC: 1

9 Mar 2004

5340-27-042-5910
Headless Straight Rod

270425910
81467106353: RNCC: 2 | RNVC: 1

28 Aug 2008

5340-27-034-3405
Utility Resilient Mount

270343405
13C00-32063-AA: RNCC: 2 | RNVC: 1

25 Dec 2006

5340-27-036-8756
Engine Accessory Bracket

270368756
3826733: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-004-7979
Expansion Plug

270047979
10091YT5077: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-026-3325
Retaining Clip

270263325
MS660166: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-004-3232
Line Supporting Strap

270043232
05001YS0059: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-008-5953
Dust And Moisture Seal Protective Cap-Plug

270085953
4364050: RNCC: 2 | RNVC: 1

21 Nov 2000

5340-27-026-9679
Metal Olmay Tampon

270269679
2T143063AA: RNCC: 2 | RNVC: 1

15 Aug 2005

5340-27-048-7693
Mounting Plate

270487693
9034-45: RNCC: 2 | RNVC: 1
9034-45: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-024-2416
Retaining Clip

270242416
31357-25800: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-043-1588
Govde Ici Ar Doseme

270431588
58RS114829: RNCC: 2 | RNVC: 1

16 Oct 2008

5340-27-027-4944
Spacing Threaded Standoff

270274944
HHRD00043: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-021-7827
Helical Compression Spring Retainer

270217827
27804: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-016-7517
Utility Resilient Mount

270167517
46760673: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-012-0813
Mounting Plate

270120813
844F 6L049 AB: RNCC: 2 | RNVC: 1

11 Jan 2002

5340-27-027-9354
Manual Control Lever

270279354
52RS001566: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-023-0100
Dust And Moisture Seal Protective Cover

270230100
20155T: RNCC: 2 | RNVC: 1

12 May 2004

5340-27-020-2091
Utility Resilient Mount

270202091
1938143: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-056-0669
Utility Resilient Mount

270560669
ASV C7: RNCC: 2 | RNVC: 1

6 Feb 2012

5340-27-053-0123
Mortise Latch Set

270530123
901-IT-26-505: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-033-6513
Spring Tension Clip

270336513
40-205-4347: RNCC: 2 | RNVC: 1
40-205-4347: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-018-6381
Cushioning Pad

270186381
1010FG-0306170: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-037-4517
Retaining Clamp Assembly

270374517
199G326-01: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-015-9914
Headless Straight Rod

270159914
7701 469 891: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-025-2713
Kapak Kilit

270252713
YTE.026.E.02.29: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-013-0524
Retaining Clip

270130524
46786152: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-037-4608
Retaining Clamp Assembly

270374608
978869-6: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-005-1627
Mounting Bracket

270051627
1010000292: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-017-7941
Double Angle Bracket

270177941
897027281051: RNCC: 2 | RNVC: 1

4 Sep 2003

5340-27-035-8007
Dust And Moisture Seal Protective Cover

270358007
3827818: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-019-5994
Access Hole Frame

270195994
07002YC0073: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-8782
Lastik Tampon

270058782
K5E4065: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-056-1638
Retaining Clip

270561638
43208200000: RNCC: 2 | RNVC: 2

27 Feb 2012

5340-27-056-9547
Dust And Moisture Seal Protective Cover

270569547
3C465K372DB: RNCC: 2 | RNVC: 1

4 Jun 2012

5340-27-052-6831
Sliding Block

270526831
109269: RNCC: 2 | RNVC: 2

15 Feb 2011

5340-27-042-1148
Headless Straight Rod

270421148
46978: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-004-7885
Mounting Bracket

270047885
10091YD5033: RNCC: 3 | RNVC: 2

2 Nov 1996

5340-27-049-1698
Retaining Strap

270491698
S01 001 0001 1650 015 D 14: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-023-0791
Dust And Moisture Seal Protective Cover

270230791
07 BMK P 0161: RNCC: 2 | RNVC: 1
5.01.07.03: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-021-4118
Mounting Plate

270214118
1009.1KI.0183-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-6114
Dust And Moisture Seal Protective Cover

270096114
4410279: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-021-5116
Buckle

270215116
1206KMT0157: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-6198
Retaining Clip

270506198
930: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-057-0657
Metal Kutu

270570657
UG 036000 POZ-1: RNCC: 5 | RNVC: 9

14 Jun 2012

5340-27-018-6386
Cushioning Pad

270186386
1010FG-0306172-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-8140
Headless Straight Rod

270438140
8200661217: RNCC: 2 | RNVC: 1

17 Dec 2008

5340-27-021-4241
Double Angle Bracket

270214241
07002YS0361: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-1032
Kilit Kol

270521032
303286: RNCC: 2 | RNVC: 1

20 Dec 2010

5340-27-054-8371
Mounting Plate

270548371
H341214002: RNCC: 2 | RNVC: 1

18 Oct 2011

5340-27-024-8540
Dust And Moisture Seal Boot

270248540
8635083: RNCC: 2 | RNVC: 1
8635083: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-046-7857
Dust And Moisture Seal Protective Cover

270467857
898030201151: RNCC: 2 | RNVC: 1

7 Oct 2009

5340-27-057-2812
Retaining Clip

270572812
2T1R14A169BA: RNCC: 3 | RNVC: 2

12 Jul 2012

5340-27-036-3714
Retaining Clip

270363714
46822644: RNCC: 2 | RNVC: 1

28 May 2007

5340-27-027-7337
Dust And Moisture Seal Protective Cover

270277337
7151459: RNCC: 2 | RNVC: 1

25 Oct 2005

5340-27-049-8544
Retaining Strap

270498544
104951: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-054-5366
Casement Fastener

270545366
98020737: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-27-036-0021
Sliding Door Track Bracket

270360021
58RS111057: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-048-6197
Headless Straight Rod

270486197
TM260301Y: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-27-059-5996
Dust And Moisture Seal Protective Plug

270595996
23 V32 213 00: RNCC: 2 | RNVC: 1

16 Sep 2013

5340-27-044-9121
Kelepce

270449121
1010006546: RNCC: 2 | RNVC: 1

19 Mar 2009

5340-27-046-4257
Pim Mentese

270464257
M10.1.693.1: RNCC: 2 | RNVC: 1

7 Aug 2009

5340-27-046-3589
Askilik

270463589
71C00-62118-AA: RNCC: 2 | RNVC: 1

30 Jul 2009

5340-27-037-1877
Retaining Clip

270371877
75132: RNCC: 5 | RNVC: 9

17 Jul 2007

5340-27-045-3789
Headless Straight Rod

270453789
MB831043: RNCC: 2 | RNVC: 1

5 May 2009

5340-27-007-4838
Dust And Moisture Seal Protective Cap-Plug

270074838
91AG 56051 AAW: RNCC: 2 | RNVC: 1

1 Dec 1999

5340-27-045-9097
Tabela

270459097
75X110 MM: RNCC: 2 | RNVC: 1

19 Jun 2009

5340-27-049-6258
Spacing Threaded Standoff

270496258
901-TI-330-23: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-005-3743
Threaded Rod End

270053743
1012-1YC-5007: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-27-020-6205
Mortise Latch Set

270206205
2590KASK9880001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8698
Casement Fastener

270278698
YC1Q6849AA: RNCC: 2 | RNVC: 1

15 Nov 2005

5340-27-049-9772
Retaining Clip

270499772
7700429937: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-015-6887
Mounting Plate

270156887
10091KI0036: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-036-8767
Engine Accessory Bracket

270368767
3835541: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-025-1542
Kapak

270251542
05001FK0246: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-005-9556
Retaining Clip

270059556
8K11744: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-048-4999
Dust And Moisture Seal Protective Cover

270484999
HD139168Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-029-1220
Dust And Moisture Seal Protective Plug

270291220
SU112101M: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-005-1556
Dust And Moisture Seal Protective Cap

270051556
1010001900: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-038-0080
Utility Resilient Mount

270380080
21525-40K00: RNCC: 5 | RNVC: 9

10 Sep 2007

5340-27-038-1209
Pawl Fastener

270381209
58241-FA005: RNCC: 5 | RNVC: 9

14 Sep 2007

5340-27-059-1026
Dust And Moisture Seal Protective Cap Set

270591026
STC1251-1: RNCC: 2 | RNVC: 1

27 May 2013

5340-27-022-3772
Mounting Plate

270223772
9BM 5340-00066: RNCC: 2 | RNVC: 1

3 Mar 2004

5340-27-001-7882
Mounting Bracket

270017882
TM55-1520-210-2205-062-691-001: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-055-2600
Mounting Plate

270552600
UG 025000 POZ-16: RNCC: 2 | RNVC: 1
UG 025000 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-014-5541
Protection Bellows

270145541
897017333051: RNCC: 2 | RNVC: 1

4 Nov 2002

5340-27-051-8897
Headless Straight Rod

270518897
0274833: RNCC: 3 | RNVC: 2

3 Dec 2010

5340-27-027-3577
Mounting Plate

270273577
2ABM1MK0089: RNCC: 2 | RNVC: 1

28 Sep 2005

5340-27-008-2519
Engine Accessory Bracket

270082519
98001095: RNCC: 2 | RNVC: 1

29 Aug 2000

5340-27-057-6334
Dust And Moisture Seal Protective Cap

270576334
ALTFC01308: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-029-6372
Dust And Moisture Seal Protective Cover

270296372
KY16024AA: RNCC: 5 | RNVC: 9

26 Apr 2006

5340-27-021-6957
Manual Control Lever

270216957
11565T: RNCC: 2 | RNVC: 1

24 Dec 2003

5340-27-034-9644
Dust And Moisture Seal Protective Cover

270349644
715623: RNCC: 2 | RNVC: 1

19 Feb 2007

5340-27-056-6360
Utility Resilient Mount

270566360
ASVB4000: RNCC: 2 | RNVC: 1
DM000400: RNCC: 2 | RNVC: 1

19 Apr 2012

5340-27-054-2619
Retaining Strap

270542619
98022088: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-009-3412
Esnek Mesnet

270093412
50010208: RNCC: 2 | RNVC: 1

19 Jun 2001

5340-27-054-2913
Runner

270542913
98019254: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-015-6989
Mounting Plate

270156989
10091YS0133: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-022-5226
Retaining Clip

270225226
90677GR1003: RNCC: 2 | RNVC: 1
90677GR1003: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-27-022-7873
Utility Resilient Mount

270227873
1524020102: RNCC: 2 | RNVC: 1
65 KOMPANSATOR: RNCC: 2 | RNVC: 1

21 Apr 2004

5340-27-016-9149
Pim Mentese

270169149
5340-TJ1-01100: RNCC: 2 | RNVC: 1

10 Apr 2003

5340-27-037-5615
Antipilferage Seal

270375615
5340-TJ1-08542: RNCC: 2 | RNVC: 1

7 Aug 2007

5340-27-005-1629
Mounting Bracket

270051629
1010000311: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-5850
Utility Resilient Mount

270485850
MA242036Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-019-1408
Helical Compression Spring Retainer

270191408
81115340019: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-2649
Nonmetallic Solid Wheel

270512649
YM070: RNCC: 5 | RNVC: 9

13 Oct 2010

5340-27-019-1400
Buckle

270191400
8335TOKA9880008: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-033-9168
Mount

270339168
0000GK0136201: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-032-2837
Baglanti Parcasi

270322837
5340T950279: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-034-1708
Dust And Moisture Seal Protective Cover

270341708
13D00-72018-AA: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-018-3588
Manual Control Lever

270183588
10121YP5547: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-037-4601
Retaining Clamp Assembly

270374601
20460120: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-014-2543
Dust And Moisture Seal Protective Cover

270142543
OC TDI EMGTK 0001: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-035-4933
Spring Holder

270354933
46463078: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-054-3066
Hand Carrying Strap Assembly

270543066
98019196: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-028-5823
Buckle

270285823
2T14V61202AA: RNCC: 2 | RNVC: 1

18 Jan 2006

5340-27-014-0011
Retaining Clip

270140011
W707136 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-057-4246
Retaining Strap

270574246
011127000000: RNCC: 2 | RNVC: 1

6 Aug 2012

5340-27-015-9397
Utility Resilient Mount

270159397
61K382: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-040-7700
Utility Resilient Mount

270407700
MC118860: RNCC: 2 | RNVC: 1

17 Mar 2008

5340-27-041-5934
Dust And Moisture Seal Protective Plug

270415934
7254423: RNCC: 2 | RNVC: 1

5 Jun 2008

5340-27-049-4894
Utility Resilient Mount

270494894
107559: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-037-5601
Utility Resilient Mount

270375601
14C01-35103-AA: RNCC: 2 | RNVC: 1

7 Aug 2007

5340-27-004-7914
Angle Bracket

270047914
10091YA5046: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-005-1476
Helical Compression Spring Seat

270051476
1010000740: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-037-5543
Manual Control Lever

270375543
32A00-61182-AA: RNCC: 2 | RNVC: 1

6 Aug 2007

5340-27-005-1806
Grooved Clamp Coupling

270051806
1010002203: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-025-6955
Cam Fitil

270256955
8K69773: RNCC: 2 | RNVC: 1

30 Mar 2005

5340-27-040-7918
Retaining Clip

270407918
54291J: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-024-4085
Retaining Clamp Assembly

270244085
1010FK-1813260: RNCC: 2 | RNVC: 1

21 Oct 2004

5340-27-009-6861
Retaining Clip

270096861
6995 V0: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-009-7221
Nut And Bolt Locking Plate

270097221
3011R-303000: RNCC: 2 | RNVC: 1

22 Aug 2001

5340-27-040-2250
Retaining Clip

270402250
46742775: RNCC: 2 | RNVC: 1

15 Jan 2008

5340-27-057-5001
Dust And Moisture Seal Protective Plug

270575001
CV-90703: RNCC: 2 | RNVC: 1

16 Aug 2012

5340-27-027-4717
Metal Olmay Tampon

270274717
71B22-55071-AA: RNCC: 2 | RNVC: 1

5 Oct 2005

5340-27-009-3725
Adaptor Govde

270093725
6040-0522-7007: RNCC: 2 | RNVC: 1
6040-0522-7007: RNCC: 2 | RNVC: 1

25 Jun 2001

5340-27-021-3431
Mounting Plate

270213431
1009.1KI.0008: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-1664
Dust And Moisture Seal Protective Cover

270341664
13D00-66202-AA: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-034-3911
Dust And Moisture Seal Protective Cover

270343911
13C00-72410-AA: RNCC: 2 | RNVC: 1

27 Dec 2006

5340-27-004-5542
Double Angle Bracket

270045542
10091YD5008: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-035-9859
Mounting Plate

270359859
10025917-2: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-033-6549
Casement Fastener

270336549
40-205-4350: RNCC: 2 | RNVC: 1
40-205-4350: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-010-3101
Mounting Plate

270103101
5999-0311-1073: RNCC: 2 | RNVC: 1
5999-0311-1073: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-032-6179
Dust And Moisture Seal Protective Cover

270326179
8K50473: RNCC: 2 | RNVC: 1

23 Aug 2006

5340-27-037-2758
Utility Resilient Mount

270372758
51RS201649: RNCC: 2 | RNVC: 1

20 Jul 2007

5340-27-057-0358
Retaining Clip

270570358
203483: RNCC: 2 | RNVC: 1

11 Jun 2012

5340-27-008-5029
Retaining Clip

270085029
85002269: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-054-2634
Casement Fastener

270542634
98017833: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-019-8118
Vehicular Seat Bracket

270198118
1010FK-1811636: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-6783
Furniture Leg Tip

270486783
PLASTIK PABUC,40X60MM: RNCC: 2 | RNVC: 1

18 Feb 2010

5340-27-020-7935
Retaining Clip

270207935
3522-1540-7100: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-9993
Dust And Moisture Seal Protective Cover

270279993
71A25-58395-AA: RNCC: 2 | RNVC: 1

24 Nov 2005

5340-27-010-4794
Mounting Plate

270104794
5999-0310-8054: RNCC: 2 | RNVC: 1
5999-0310-8054: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-058-2862
Mounting Plate

270582862
106564-000: RNCC: 2 | RNVC: 2

3 Jan 2013

5340-27-019-2538
Protection Bellows

270192538
10131YK0569: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-3452
Retaining Clip

270083452
6040-1313-3008: RNCC: 2 | RNVC: 1
6040-1313-3008: RNCC: 2 | RNVC: 1

20 Sep 2000

5340-27-028-5953
Dust And Moisture Seal Protective Cover

270285953
46436137: RNCC: 2 | RNVC: 1

19 Jan 2006

5340-27-043-7564
Headless Straight Rod

270437564
4422A009: RNCC: 2 | RNVC: 1

5 Dec 2008

5340-27-022-8781
Dust And Moisture Seal Protective Plug

270228781
18176T: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-043-8013
Access Door Hinge

270438013
58RS110854: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-051-1061
Retaining Strap

270511061
101598: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-019-4099
Buckle

270194099
10091MT0763: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-052-9356
Retaining Clip

270529356
82 00 927 914: RNCC: 3 | RNVC: 2

9 Mar 2011

5340-27-018-6515
Buckle

270186515
33180020: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-7472
Dust And Moisture Seal Protective Cover

270267472
MR141354: RNCC: 2 | RNVC: 1

26 Jul 2005

5340-27-005-1585
Manual Control Lever

270051585
1010001471: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-045-6772
Dust And Moisture Seal Protective Cap

270456772
1.HIBM-1Q-964: RNCC: 2 | RNVC: 1

2 Jun 2009

5340-27-025-0249
Dust And Moisture Seal Protective Cover

270250249
F-998: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-005-1536
Angle Bracket

270051536
1010000300: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-6303
Sliding Door Track

270056303
92VT-V250K15-BCYCE: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-057-4179
Nut And Bolt Head Protective Cap

270574179
Y0370262550003250: RNCC: 2 | RNVC: 1

3 Aug 2012

5340-27-018-6370
Cushioning Pad

270186370
1010FG-0306167-5: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-2796
Dust And Moisture Seal Protective Cover

270382796
19206-50K01: RNCC: 5 | RNVC: 9

26 Sep 2007

5340-27-013-8824
Spacing Threaded Standoff

270138824
YC15 5495 AA: RNCC: 2 | RNVC: 1

5 Aug 2002

5340-27-022-6417
Dust And Moisture Seal Protective Cover

270226417
13462T: RNCC: 2 | RNVC: 1

2 Apr 2004

5340-27-026-7033
Protection Bellows

270267033
MB243858: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-026-2100
Kaucuk Tampon

270262100
5340-TJ1-05549: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-053-8531
Access Door Hinge

270538531
H346032300: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-009-3511
Retaining Clip

270093511
52RS002553: RNCC: 2 | RNVC: 1

20 Jun 2001

5340-27-049-8308
Utility Resilient Mount

270498308
7335790301: RNCC: 2 | RNVC: 1
25-6: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-021-1309
Utility Resilient Mount

270211309
1009.1KI.0181-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-7365
Kenar Siki Kelepce

270217365
23090: RNCC: 2 | RNVC: 1

25 Dec 2003

5340-27-051-4613
Retaining Strap

270514613
72A15-61627-AA: RNCC: 2 | RNVC: 1

28 Oct 2010

5340-27-036-7630
Headless Straight Rod

270367630
C01AG35: RNCC: 2 | RNVC: 1

25 Jun 2007

5340-27-036-0023
Sliding Door Track Bracket

270360023
58RS111058: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-035-9862
Mounting Plate

270359862
10024776: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-021-0726
Retaining Clamp Assembly

270210726
1009.1KI.0131-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-8871
Engine Accessory Bracket

270368871
3825177-3: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-022-8979
Mounting Plate

270228979
1.HIBM-1I-1327A: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-035-8692
Manual Control Handle

270358692
181145080: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-008-6451
Dust And Moisture Seal Protective Cover

270086451
98000368: RNCC: 2 | RNVC: 1

7 Dec 2000

5340-27-009-6675
Retaining Clip

270096675
7950 53: RNCC: 2 | RNVC: 1

15 Aug 2001

5340-27-039-9159
Retaining Clip

270399159
8200187848: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-039-3188
Retaining Clip

270393188
8200184181: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-039-8677
Retaining Clip

270398677
7703079944: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-041-5587
Koruyucu Tapa

270415587
16001YT0351: RNCC: 2 | RNVC: 1

4 Jun 2008

5340-27-021-2851
Casement Fastener

270212851
1009.1KI.0107-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-9749
Expansion Shield

270269749
5315-29631-00005: RNCC: 2 | RNVC: 1

16 Aug 2005

5340-27-019-6373
Extension Drawer Slide Section

270196373
05001HR0079: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-8134
Retaining Clip

270098134
7703079324: RNCC: 2 | RNVC: 1

12 Sep 2001

5340-27-054-6104
Dust And Moisture Seal Protective Cap

270546104
98021853: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-028-7502
Door Handle

270287502
220X40MM, PRINC: RNCC: 2 | RNVC: 1
22X4X10 CM: RNCC: 5 | RNVC: 9

2 Feb 2006

5340-27-052-1877
Dust And Moisture Seal Protective Cover

270521877
16F10-58402-AA: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-059-2693
Protection Bellows

270592693
55RS660044: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-040-0705
Manual Control Lever

270400705
897301519051: RNCC: 2 | RNVC: 1

4 Jan 2008

5340-27-053-1722
Retaining Clip

270531722
77 01 070 623: RNCC: 2 | RNVC: 2

5 Apr 2011

5340-27-035-2362
Dust And Moisture Seal Protective Plug

270352362
55189943: RNCC: 2 | RNVC: 1

5 Mar 2007

5340-27-021-8347
Retaining Clip

270218347
43156MAT000: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-043-5238
Dust And Moisture Seal Protective Cap

270435238
9033 A3: RNCC: 2 | RNVC: 1

19 Nov 2008

5340-27-015-6910
Mounting Plate

270156910
10091KI0062: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-3070
Retaining Clip

270393070
8200124827: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-040-3872
Ara Parcasi

270403872
11674463-2: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-055-4607
Koruklu Lastik

270554607
439300783: RNCC: 5 | RNVC: 9

6 Dec 2011

5340-27-056-4127
Birlestirme Parcasi

270564127
9BM 5340-00375: RNCC: 2 | RNVC: 1

26 Mar 2012

5340-27-025-3026
Mounting Plate

270253026
YTE.026.E.01.03: RNCC: 2 | RNVC: 1

22 Feb 2005

5340-27-036-3702
Retaining Clip

270363702
46413761: RNCC: 2 | RNVC: 1

28 May 2007

5340-27-048-4128
Plaka

270484128
34489: RNCC: 2 | RNVC: 1

9 Feb 2010

5340-27-035-9960
Retaining Strap

270359960
51RS201640: RNCC: 2 | RNVC: 1

17 Apr 2007

5340-27-005-1533
Angle Bracket

270051533
1010000112: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-4784
Headless Straight Rod

270544784
111Y13: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-27-051-7007
Surgulu Destek

270517007
3EC-51-21152: RNCC: 3 | RNVC: 2

22 Nov 2010

5340-27-032-2698
Plastik Seperator

270322698
72A08-35308-AA: RNCC: 2 | RNVC: 1

13 Jun 2006

5340-27-017-0076
Mounting Plate

270170076
6040-0532-8058: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-006-9944
Manual Control Handle

270069944
91AB F61354 AE: RNCC: 2 | RNVC: 1

8 Jul 1999

5340-27-021-4428
Mounting Plate

270214428
1009.1KI.0294-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-033-6429
Access Hole Frame

270336429
40-205-2230: RNCC: 2 | RNVC: 1
40-205-2230: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-036-6865
Dust And Moisture Seal Protective Cover

270366865
83A11-76216-AC: RNCC: 2 | RNVC: 1
83A11-76216-AB: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-055-3247
Dust And Moisture Seal Protective Cover

270553247
1692-0072: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-043-3660
Manual Control Handle

270433660
74A05-62200-AA: RNCC: 2 | RNVC: 1

3 Nov 2008

5340-27-040-5189
Mounting Plate

270405189
BA-881: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-036-2868
Retaining Clip

270362868
46788365: RNCC: 2 | RNVC: 1

22 May 2007

5340-27-016-7497
Utility Resilient Mount

270167497
46836452: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-017-3734
Door Handle

270173734
1009.1IS.0059-7A: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-006-8293
Manual Control Lever

270068293
062000304: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-042-9493
Nut And Bolt Locking Plate

270429493
40.270.0429: RNCC: 2 | RNVC: 1
40.270.0429: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-056-8115
Lastik Takoz

270568115
2.HIBM-4H-0666/1/F-0013: RNCC: 2 | RNVC: 1

15 May 2012

5340-27-036-8851
Engine Accessory Bracket

270368851
865178-8: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-021-1316
Utility Resilient Mount

270211316
1009.1KI.0350-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-0007
Manual Control Handle

270230007
1010FK-0000177: RNCC: 2 | RNVC: 1

11 May 2004

5340-27-012-4655
Retaining Clip

270124655
E 464002 S71: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-045-7157
Surgulu Kilit

270457157
C7-10-B: RNCC: 2 | RNVC: 1

8 Jun 2009

5340-27-059-2330
Kol

270592330
KIBI 01/400097132: RNCC: 2 | RNVC: 1

21 Jun 2013

5340-27-023-4826
Raf Tutucusu

270234826
RAF PIMI: RNCC: 2 | RNVC: 1

6 Jul 2004

5340-27-011-8219
Dust And Moisture Seal Protective Cap

270118219
8C53-2: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-037-4604
Retaining Clamp Assembly

270374604
968124-8: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-041-9018
Retaining Clip

270419018
0-1019: RNCC: 2 | RNVC: 1
0-1019: RNCC: 2 | RNVC: 1

30 Jun 2008

5340-27-056-1149
Manual Control Lever

270561149
C70P68: RNCC: 2 | RNVC: 1

14 Feb 2012

5340-27-008-0231
E Montaj Malzemesi

270080231
9062254: RNCC: 2 | RNVC: 1

7 Jun 2000

5340-27-025-2932
Utility Resilient Mount

270252932
5008743252: RNCC: 2 | RNVC: 1

18 Feb 2005

5340-27-032-9173
Dust And Moisture Seal Protective Cover

270329173
13D00-70270-AA: RNCC: 2 | RNVC: 1

28 Sep 2006

5340-27-026-7189
Mounting Plate

270267189
2ABM 1MK 0084: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-058-1340
Utility Resilient Mount

270581340
98014279: RNCC: 2 | RNVC: 1

13 Dec 2012

5340-27-036-2304
Retaining Clip

270362304
14631587: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-010-2703
Retaining Clip

270102703
7700724393: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-044-3269
Tutucu

270443269
150-13-02-99-01-723: RNCC: 2 | RNVC: 1

27 Jan 2009

5340-27-057-6828
Retaining Strap

270576828
083-006000-002: RNCC: 2 | RNVC: 1

24 Sep 2012

5340-27-044-3978
Dust And Moisture Seal Protective Cover

270443978
12E00-57132-AB: RNCC: 2 | RNVC: 1

2 Feb 2009

5340-27-016-7448
Retaining Clip

270167448
7689294: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-041-5677
Dust And Moisture Seal Protective Cover

270415677
727502-000: RNCC: 2 | RNVC: 1

4 Jun 2008

5340-27-011-7556
Mounting Plate

270117556
A7-205: RNCC: 2 | RNVC: 1
A7-205: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-4398
Mounting Plate

270214398
1009.1KI.0110-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-8888
Engine Accessory Bracket

270368888
3826103-8: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-036-8821
Engine Accessory Bracket

270368821
3826377-8: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-022-8810
Dust And Moisture Seal Protective Plug

270228810
15716-1110: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-040-7917
Retaining Clip

270407917
MR402859: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-040-7928
Retaining Clip

270407928
MS660164: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-010-5074
Mounting Plate

270105074
98012624: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-047-8738
Dust And Moisture Seal Protective Cover

270478738
13C25-72718-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-039-8632
Engine Accessory Bracket

270398632
20839219: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-028-8501
Retaining Clip

270288501
MB121032: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-048-3691
Retaining Clip

270483691
51RS702716: RNCC: 2 | RNVC: 1

3 Feb 2010

5340-27-040-3602
Dust And Moisture Seal Protective Plug

270403602
7701209020: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-012-5286
Retaining Clip

270125286
7703081151: RNCC: 2 | RNVC: 1

7 Feb 2002

5340-27-036-3632
Retaining Clip

270363632
7720144: RNCC: 2 | RNVC: 1

25 May 2007

5340-27-056-6620
Mounting Plate

270566620
MM-7412-0238: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-028-8408
Retaining Clip

270288408
71A70-76931-AA: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-019-2531
Spring Holder

270192531
10131YT0058: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-2680
Mounting Plate

270072680
3181594-1: RNCC: 2 | RNVC: 1

13 Jun 2001

5340-27-042-0120
Cihaz Bileklik

270420120
869755498122-7: RNCC: 5 | RNVC: 9

9 Jul 2008

5340-27-046-9905
Dust And Moisture Seal Protective Cover

270469905
79A01-58781-AA: RNCC: 2 | RNVC: 1

26 Oct 2009

5340-27-017-4041
Mounting Plate

270174041
1009.1IS.0071-C2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-005-1785
Helical Compression Spring Seat

270051785
1010001601: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-021-7663
Retaining Clamp Assembly

270217663
1009 1YK 0904: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-021-9438
Metal Olmay Tampon

270219438
11024T: RNCC: 2 | RNVC: 1

14 Jan 2004

5340-27-021-9279
Kol

270219279
226A20: RNCC: 2 | RNVC: 1

13 Jan 2004

5340-27-025-8662
Dust And Moisture Seal Protective Cap-Plug Set

270258662
901-YK-67: RNCC: 2 | RNVC: 1

21 Apr 2005

5340-27-050-8403
Manual Control Lever

270508403
63D-43631-00: RNCC: 3 | RNVC: 2
63D-43631-00: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-040-3143
Mounting Plate

270403143
98000-0380: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-048-2573
Plaka

270482573
50X50X5MM: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-005-7518
Helical Compression Spring Seat

270057518
36 T: RNCC: 2 | RNVC: 1

26 Jan 1998

5340-27-026-1950
Muhafaza

270261950
10.2565.76: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-053-2948
Mounting Plate

270532948
740.06.10-02.040: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-27-016-7453
Retaining Clip

270167453
7662752: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-014-5697
Dust And Moisture Seal Protective Cover

270145697
387001859001: RNCC: 2 | RNVC: 1

7 Nov 2002

5340-27-042-1035
Dust And Moisture Seal Protective Plug

270421035
TAPA,YAPISKANLI,MAUN: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-040-5174
Ara Parcasi

270405174
7953126: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-039-6975
Radyator Takoz

270396975
20405749: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-055-2755
Baglanti Parcasi

270552755
70X36X33 MM: RNCC: 5 | RNVC: 9

25 Nov 2011

5340-27-051-1926
Liquid Holding Unit Filler Neck

270511926
YM173: RNCC: 5 | RNVC: 9

8 Oct 2010

5340-27-034-2232
Kapak

270342232
300010: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-058-5344
Mounting Plate

270585344
920-8160/01: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-056-4464
Retaining Clip

270564464
12110725: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-040-3117
Rakor

270403117
144327: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-049-5864
Boru

270495864
302949: RNCC: 2 | RNVC: 1

12 May 2010

5340-27-016-6913
Esnek Mesnet

270166913
83.41501.6503: RNCC: 2 | RNVC: 1

28 Feb 2003

5340-27-047-9394
Dust And Moisture Seal Protective Plug

270479394
FN11223: RNCC: 2 | RNVC: 1

24 Dec 2009

5340-27-057-4779
Utility Resilient Mount

270574779
7700428665: RNCC: 2 | RNVC: 1

14 Aug 2012

5340-27-049-7859
Clamp

270497859
8AT.2710.219: RNCC: 3 | RNVC: 2

31 May 2010

5340-27-049-9581
Plaka

270499581
10046559: RNCC: 2 | RNVC: 1

15 Jun 2010

5340-27-050-2420
Rakor

270502420
10091YR7021: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-004-7915
Double Angle Bracket

270047915
10091YM5025: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-019-2455
Protection Bellows

270192455
10131YL0121: RNCC: 2 | RNVC: 1
10131YL0121: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-018-2659
Retaining Clip

270182659
2886262: RNCC: 2 | RNVC: 1

13 Nov 2003

5340-27-058-2316
Mounting Plate

270582316
1010FMA-3515100: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-035-2852
Dust And Moisture Seal Protective Plug

270352852
71732844: RNCC: 2 | RNVC: 1

7 Mar 2007

5340-27-006-0858
Loop Clamp

270060858
2K15694: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-046-9576
Utility Resilient Mount

270469576
897333319051: RNCC: 2 | RNVC: 1

22 Oct 2009

5340-27-056-7205
Doner Govd Tekerlek

270567205
SMR 200: RNCC: 2 | RNVC: 1

2 May 2012

5340-27-040-5226
Ara Parcasi

270405226
8369893: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-040-4808
Plug

270404808
11610614: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-027-7266
Dust And Moisture Seal Protective Plug

270277266
90338-06018-00: RNCC: 2 | RNVC: 1
YS512092AA: RNCC: 2 | RNVC: 1

25 Oct 2005

5340-27-056-9401
Lastik Mafsal

270569401
CH01-01-011: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-005-4538
Kapi Komple Takoz

270054538
K5B-2171: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-047-2224
Dust And Moisture Seal Protective Cover

270472224
13C00-72114-AB: RNCC: 2 | RNVC: 1

12 Nov 2009

5340-27-040-0247
Runner

270400247
05001FK0468: RNCC: 2 | RNVC: 1

3 Jan 2008

5340-27-040-3948
Ara Parcasi

270403948
12252506-2: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-057-8382
Takma-Sokme Aparat

270578382
KCU19-208-0888: RNCC: 2 | RNVC: 1

6 Nov 2012

5340-27-027-5853
Esnek Mesnet

270275853
7150387: RNCC: 2 | RNVC: 1

12 Oct 2005

5340-27-026-8368
Tutucu

270268368
05001FT0138: RNCC: 2 | RNVC: 1

4 Aug 2005

5340-27-054-4442
Utility Resilient Mount

270544442
98022888: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-039-8763
Pawl Fastener

270398763
897397848051: RNCC: 5 | RNVC: 9

25 Dec 2007

5340-27-001-6887
Buckle

270016887
IK0082: RNCC: 3 | RNVC: 1

5 Jul 1993

5340-27-040-5401
Tutucu

270405401
10916033: RNCC: 2 | RNVC: 1

29 Jan 2008

5340-27-008-7364
Kaucuk Tampon

270087364
83.96020.0501: RNCC: 2 | RNVC: 1

3 Jan 2001

5340-27-058-7239
Kulp Kaplama

270587239
M258D321000000: RNCC: 2 | RNVC: 1

21 Mar 2013

5340-27-019-9261
Utility Resilient Mount

270199261
5360ATF0100: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-016-7922
Protection Bellows

270167922
2903718: RNCC: 2 | RNVC: 1
2943718: RNCC: 2 | RNVC: 1

13 Mar 2003

5340-27-016-3314
Retaining Clip

270163314
6000046501: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-035-8162
Dust And Moisture Seal Protective Plug

270358162
3964803: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-027-3874
Destekleme Papuc

270273874
TMC-643: RNCC: 2 | RNVC: 1
5680-KK-001-7562: RNCC: 2 | RNVC: 1

30 Sep 2005

5340-27-021-8902
Mounting Plate

270218902
KMS 0013-1: RNCC: 2 | RNVC: 1

9 Jan 2004

5340-27-027-2126
Dust And Moisture Seal Protective Cover

270272126
3T1614B629AA: RNCC: 2 | RNVC: 1

16 Sep 2005

5340-27-008-0341
Protection Bellows

270080341
61596842: RNCC: 2 | RNVC: 1

8 Jun 2000

5340-27-053-8302
Utility Resilient Mount

270538302
A928-551530: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-052-0605
Mounting Plate

270520605
1010FK-2702400-2: RNCC: 2 | RNVC: 1

15 Dec 2010

5340-27-036-4095
Askilik

270364095
12A14-72025-AA: RNCC: 2 | RNVC: 1

1 Jun 2007

5340-27-005-1635
Mounting Bracket

270051635
1010001181: RNCC: 3 | RNVC: 2

14 Feb 1997

Load More Results