What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 42 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 42 of 53

5340-27-017-0124
Double Angle Bracket

270170124
10131YB0794: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-058-2019
Pawl Fastener

270582019
63230-ZY3-C00: RNCC: 2 | RNVC: 1

20 Dec 2012

5340-27-037-6130
Mounting Plate

270376130
51851-FA300: RNCC: 5 | RNVC: 9

9 Aug 2007

5340-27-059-9398
Utility Resilient Mount

270599398
90X55X400 MM: RNCC: 2 | RNVC: 1

10 Dec 2013

5340-27-036-8855
Engine Accessory Bracket

270368855
865785-0: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-056-3066
Dust And Moisture Seal Protective Cover

270563066
8000TE-22: RNCC: 5 | RNVC: 9

13 Mar 2012

5340-27-050-8390
Access Door Hinge

270508390
6H4-14406-00: RNCC: 3 | RNVC: 2
6H4-14406-00: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-035-9032
Dust And Moisture Seal Protective Plug

270359032
3631-001: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-022-0405
Mounting Plate

270220405
1009 1IS 0068A-9: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-049-7685
Takviyeli Kosebent

270497685
MP002013: RNCC: 2 | RNVC: 1

27 May 2010

5340-27-044-8356
Tutucu

270448356
102 0516-04: RNCC: 5 | RNVC: 9

16 Mar 2009

5340-27-012-1555
Multiple Angle Bracket

270121555
10131YS0918: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-044-4166
Retaining Strap

270444166
81.97460-6052: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-050-8784
Electromagnetic Lock

270508784
EM-300M: RNCC: 5 | RNVC: 9

7 Sep 2010

5340-27-033-6386
Nut And Bolt Locking Plate

270336386
40-205-4954: RNCC: 2 | RNVC: 1
40-205-4954: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-016-4025
Metal Olmay Tampon

270164025
46751547: RNCC: 2 | RNVC: 1

14 Jan 2003

5340-27-041-0998
Kapan Arac Giris Ci

270410998
3 M: RNCC: 5 | RNVC: 9

30 Apr 2008

5340-27-058-2277
Utility Resilient Mount

270582277
16807-ZY3-003: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-032-6434
Destek Plakasi

270326434
T530-G2490-000: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-012-3791
Retaining Clip

270123791
E860041 S: RNCC: 2 | RNVC: 1

28 Jan 2002

5340-27-056-1421
Kapak

270561421
UG 050000 POZ-2: RNCC: 5 | RNVC: 9

20 Feb 2012

5340-27-019-1025
Utility Resilient Mount

270191025
1308KMW0001: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-6572
Manyetik Kilit

270516572
KD-050/10-100: RNCC: 5 | RNVC: 9

11 Nov 2010

5340-27-018-8295
Mounting Plate

270188295
901-YP-12: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-003-8293
Electronic Equipment Hardware Kit

270038293
5999-1110-1003: RNCC: 2 | RNVC: 1
5999-1110-1003: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-011-8214
Dust And Moisture Seal Protective Cap

270118214
8C-177: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-010-1299
Window Retaining Plate

270101299
ALR6219: RNCC: 2 | RNVC: 1
ALR6219: RNCC: 2 | RNVC: 1

6 Nov 2001

5340-27-035-7425
Engine Accessory Bracket

270357425
3826669: RNCC: 2 | RNVC: 1

27 Mar 2007

5340-27-041-3391
Dust And Moisture Seal Protective Cover

270413391
GNGB13055A: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-039-8704
Retaining Clip

270398704
8200257453: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-025-1572
Dust And Moisture Seal Protective Plug

270251572
204-040-505-5: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-044-8225
Helical Compression Spring Seat

270448225
82435857: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-27-028-4211
Utility Resilient Mount

270284211
8200000010: RNCC: 2 | RNVC: 1
8200358666: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-023-5213
Utility Resilient Mount

270235213
2ABMK 00478: RNCC: 2 | RNVC: 1

9 Jul 2004

5340-27-038-5791
Air Inlet-Outlet Frame

270385791
EM.AL.3020: RNCC: 2 | RNVC: 1

18 Oct 2007

5340-27-020-6258
Mortise Latch Set

270206258
2510MDAL9880003: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-0017
Retaining Clip

270140017
W706186 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-019-5354
Extension Drawer Slide Section

270195354
07002YR0032: RNCC: 2 | RNVC: 1
450 MM: RNCC: 2 | RNVC: 1
RAY,45CM: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-8513
Dust And Moisture Seal Boot

270248513
05001DK0358: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-053-5691
Retaining Clip

270535691
10131YK0561: RNCC: 2 | RNVC: 1

20 May 2011

5340-27-005-1636
Mounting Bracket

270051636
1010001677: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-053-6576
Mounting Plate

270536576
H341156900: RNCC: 2 | RNVC: 1

1 Jun 2011

5340-27-036-8864
Engine Accessory Bracket

270368864
965556-4: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-024-2390
Retaining Clip

270242390
31225-22000: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-017-9863
Mounting Plate

270179863
AC-7470-0017: RNCC: 2 | RNVC: 1

21 Oct 2003

5340-27-053-7760
Utility Resilient Mount

270537760
C171-500040: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-27-024-4471
Retaining Clip

270244471
5320-1001187: RNCC: 2 | RNVC: 1

28 Oct 2004

5340-27-048-9523
Mounting Plate

270489523
40.631.1105: RNCC: 2 | RNVC: 1

22 Mar 2010

5340-27-057-5416
Retaining Strap

270575416
ALTFC01006: RNCC: 2 | RNVC: 1

28 Aug 2012

5340-27-026-3441
Retaining Clip

270263441
MB375995: RNCC: 2 | RNVC: 1

30 Jun 2005

5340-27-021-8224
Spring Holder

270218224
11641868: RNCC: 2 | RNVC: 1

31 Dec 2003

5340-27-014-5727
Utility Resilient Mount

270145727
894111903051: RNCC: 2 | RNVC: 1
894111903001: RNCC: 2 | RNVC: 1

13 Aug 2003

5340-27-004-3276
Manual Control Lever

270043276
05001YK0242: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-018-7112
Cushioning Pad

270187112
1010FK-3506087: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-045-7486
Mounting Plate

270457486
10029176: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-035-5707
Retaining Strap

270355707
13D00-80620-AA: RNCC: 2 | RNVC: 1

20 Mar 2007

5340-27-046-8960
Pawl Fastener

270468960
897411781051: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-27-035-5568
Engine Accessory Bracket

270355568
3839320: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-040-2895
Utility Resilient Mount

270402895
8200051471: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-052-6195
Retaining Clip

270526195
96 40 000 29R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-050-5078
Retaining Strap

270505078
108480: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-015-8083
Threaded Rod End

270158083
2106002308: RNCC: 2 | RNVC: 1

13 Dec 2002

5340-27-036-6676
Govde Ici Ar Doseme

270366676
58RS112932: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-015-9110
Metal Olmay Tampon

270159110
7700565146: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-039-3216
Kapak

270393216
3809563: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-024-1947
Dust And Moisture Seal Protective Plug

270241947
57737-24000: RNCC: 2 | RNVC: 1

29 Sep 2004

5340-27-052-8149
Sac Mahfaza

270528149
40199: RNCC: 2 | RNVC: 1

25 Feb 2011

5340-27-017-2785
Spacing Threaded Standoff

270172785
H-39-4862-50: RNCC: 2 | RNVC: 1

6 Jun 2003

5340-27-005-6142
Mounting Bracket

270056142
90VB-14551-AC: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-050-2782
Retaining Clip

270502782
A11420240: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-27-035-5708
Retaining Strap

270355708
12E00-80586-AA: RNCC: 2 | RNVC: 1

20 Mar 2007

5340-27-058-0496
Headless Straight Rod

270580496
200809: RNCC: 2 | RNVC: 1

4 Dec 2012

5340-27-036-1235
Retaining Strap

270361235
3C469057AA: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-057-6348
Makara

270576348
ALTFC01297: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-058-0684
Buckle

270580684
10072152: RNCC: 2 | RNVC: 1

6 Dec 2012

5340-27-049-1022
Ara Parcasi

270491022
302848: RNCC: 2 | RNVC: 1

2 Apr 2010

5340-27-040-3927
Ara Parcasi

270403927
11637264: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-005-1569
Esnek Destek

270051569
1010001394: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-023-8785
Kapak

270238785
7.13.10.03: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-007-3468
Casement Fastener

270073468
W 703122 SSYNB5: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-049-1269
Metal Takoz

270491269
302860: RNCC: 2 | RNVC: 1

6 Apr 2010

5340-27-014-0043
Retaining Clip

270140043
W700087 S300: RNCC: 2 | RNVC: 1

26 Aug 2002

5340-27-042-0303
Retaining Clip

270420303
45093: RNCC: 2 | RNVC: 1

10 Jul 2008

5340-27-028-6776
Utility Resilient Mount

270286776
MR132971: RNCC: 2 | RNVC: 1

30 Jan 2006

5340-27-028-8412
Mermi Sikma Ki Kol

270288412
12252438-1: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-054-5584
Kapan Arac Giris Ci

270545584
LASTIK PATLATAN,3 M: RNCC: 2 | RNVC: 1

26 Sep 2011

5340-27-043-6472
Mounting Plate

270436472
2ABEP01000: RNCC: 2 | RNVC: 1

28 Nov 2008

5340-27-056-6390
Utility Resilient Mount

270566390
ASVD02 00: RNCC: 2 | RNVC: 1
DM020200: RNCC: 2 | RNVC: 1

19 Apr 2012

5340-27-005-5910
Manual Control Lever

270055910
86VB-2K603-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-009-3565
Dust And Moisture Seal Protective Cover

270093565
5999-9022-6070: RNCC: 2 | RNVC: 1
5999-9022-6070: RNCC: 2 | RNVC: 1

20 Jun 2001

5340-27-040-5257
Baglanti Parcasi

270405257
490966177: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-040-9859
Dust And Moisture Seal Protective Plug

270409859
MB031945: RNCC: 2 | RNVC: 1

16 Apr 2008

5340-27-005-9848
Dust And Moisture Seal Protective Cap-Plug

270059848
Y3902363: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-008-8890
Retaining Clip

270088890
7630501: RNCC: 2 | RNVC: 1

8 Feb 2001

5340-27-027-9329
Manual Control Lever

270279329
52RS008701: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-037-5888
Firca Sap

270375888
3 M: RNCC: 2 | RNVC: 1

8 Aug 2007

5340-27-048-1734
Permanent Magnet

270481734
268.02.3: RNCC: 2 | RNVC: 1

14 Jan 2010

5340-27-056-5999
Mounting Plate

270565999
1010FMA-0607051: RNCC: 2 | RNVC: 1

13 Apr 2012

5340-27-025-3285
Retaining Clamp Assembly

270253285
73-3571-3682: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-059-3541
Headless Straight Rod

270593541
7701479492: RNCC: 2 | RNVC: 1

22 Jul 2013

5340-27-015-5493
Metal Olmay Tampon

270155493
14001YL0107: RNCC: 2 | RNVC: 1
13C00-03772-AB: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-9019
Esnek [19560 Rekor

270399019
0.2.004.18.0004: RNCC: 2 | RNVC: 1

26 Dec 2007

5340-27-007-4717
Mounting Bracket

270074717
91AG F44851 AA: RNCC: 2 | RNVC: 1

29 Nov 1999

5340-27-010-2745
Multiple Angle Bracket

270102745
10131YS0813: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-008-0426
E Montaj Malzemesi

270080426
8556705: RNCC: 2 | RNVC: 1

9 Jun 2000

5340-27-043-7374
Metal Takoz

270437374
2ABEP01003: RNCC: 2 | RNVC: 1

4 Dec 2008

5340-27-042-4315
Mounting Plate

270424315
1,5X30X87: RNCC: 2 | RNVC: 1

15 Aug 2008

5340-27-056-4271
Retaining Clip

270564271
103880081: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-017-4015
Mounting Plate

270174015
1009.1IS.0066-12: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-035-8561
Retaining Strap

270358561
4318505: RNCC: 2 | RNVC: 1

3 Apr 2007

5340-27-036-1451
Retaining Bail

270361451
KILIT KULP: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-056-1766
Protection Bellows

270561766
PV11087: RNCC: 2 | RNVC: 2

28 Feb 2012

5340-27-032-3518
Kapak

270323518
83966010002: RNCC: 2 | RNVC: 1

23 Jun 2006

5340-27-044-1090
Komples Kapi Kilit

270441090
KD-040/80-100: RNCC: 2 | RNVC: 1

8 Jan 2009

5340-27-035-7954
Retaining Clamp Assembly

270357954
3944558: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-022-0392
Protection Bellows

270220392
22566: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-015-6868
Mounting Plate

270156868
10091KI0003: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-047-5657
Kapi Kolu Ayna

270475657
AYNA,PVC: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-003-8246
Electronic Equipment Hardware Kit

270038246
6040-0516-4030: RNCC: 2 | RNVC: 1
6040-0516-4030: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-058-2193
Utility Resilient Mount

270582193
32127-ZZ3-000: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-021-3452
Double Angle Bracket

270213452
1010FG-0000750: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-003-8282
Electronic Equipment Hardware Kit

270038282
5999-0310-2022: RNCC: 2 | RNVC: 1
5999-0310-2022: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-005-5965
Mounting Bracket

270055965
92VB-5A204-AD: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-048-9533
Mounting Plate

270489533
40.631.2110: RNCC: 2 | RNVC: 1

22 Mar 2010

5340-27-022-3400
Dust And Moisture Seal Protective Cover

270223400
57RS300923: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-024-5396
Metal Olmay Tampon

270245396
155-209: RNCC: 5 | RNVC: 9

11 Nov 2004

5340-27-054-3145
Cover

270543145
20725337: RNCC: 2 | RNVC: 2
20725337: RNCC: 5 | RNVC: 9

17 Aug 2011

5340-27-027-1459
Delikli Plaka

270271459
1010F-2600708-1: RNCC: 2 | RNVC: 1

8 Sep 2005

5340-27-019-1280
Protection Bellows

270191280
78VB7277EA: RNCC: 2 | RNVC: 1
78VB7277EA: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-017-8082
Retaining Clip

270178082
10131YK0890: RNCC: 2 | RNVC: 1

9 Sep 2003

5340-27-035-7943
Retaining Clamp Assembly

270357943
945081: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-040-4679
Mounting Plate

270404679
10916936: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-008-2469
Engine Accessory Bracket

270082469
98000797: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-025-4949
Utility Resilient Mount

270254949
22252-32241: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-035-5571
Engine Accessory Bracket

270355571
3587883: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-055-4263
Utility Resilient Mount

270554263
5115768: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-023-9740
Dust And Moisture Seal Protective Cap

270239740
LCB 901: RNCC: 2 | RNVC: 1

1 Sep 2004

5340-27-004-7911
Angle Bracket

270047911
10091YA5040: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-058-1361
Retaining Clip

270581361
CV60303: RNCC: 2 | RNVC: 1

13 Dec 2012

5340-27-040-2798
Mounting Plate

270402798
Y531-63300-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-013-0527
Utility Resilient Mount

270130527
46759567: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-056-7513
Baglanti Parcasi

270567513
42471: RNCC: 2 | RNVC: 1

8 May 2012

5340-27-027-3977
Utility Resilient Mount

270273977
MR113271: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-034-5190
Manual Control Lever

270345190
51RS500279: RNCC: 2 | RNVC: 1

16 Jan 2007

5340-27-020-2836
Dust And Moisture Seal Protective Cover

270202836
897076981051: RNCC: 2 | RNVC: 1

21 Nov 2003

5340-27-051-4765
Retaining Clamp Assembly

270514765
45 6625 0137: RNCC: 2 | RNVC: 1
4566250137: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-042-5097
Flange Protector

270425097
9BM 5340-00232: RNCC: 2 | RNVC: 1

20 Aug 2008

5340-27-052-6061
Utility Resilient Mount

270526061
105594: RNCC: 2 | RNVC: 2

9 Feb 2011

5340-27-020-0022
Utility Resilient Mount

270200022
AIE9000: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-039-5371
Retaining Clip

270395371
109701284051: RNCC: 2 | RNVC: 1

6 Dec 2007

5340-27-009-8119
Retaining Clip

270098119
7703079135: RNCC: 2 | RNVC: 1

12 Sep 2001

5340-27-047-1718
Utility Resilient Mount

270471718
13C00-56061-AA: RNCC: 3 | RNVC: 2

10 Nov 2009

5340-27-048-5601
Retaining Clip

270485601
HD254609Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-013-1766
Retaining Clip

270131766
7692407: RNCC: 2 | RNVC: 1

9 May 2002

5340-27-033-8502
Dust And Moisture Seal Protective Cover

270338502
13D00-72252-AB: RNCC: 2 | RNVC: 1

22 Nov 2006

5340-27-047-2615
Dust And Moisture Seal Protective Cover

270472615
LR005002: RNCC: 2 | RNVC: 1

17 Nov 2009

5340-27-019-1346
Retaining Band

270191346
83974605009: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-029-8684
Utility Resilient Mount

270298684
002431: RNCC: 2 | RNVC: 1
002431: RNCC: 2 | RNVC: 1

1 Jun 2006

5340-27-058-4699
Mounting Plate

270584699
1010FMA-1901223: RNCC: 2 | RNVC: 1

6 Feb 2013

5340-27-004-7967
Engine Accessory Bracket

270047967
10091YP5125: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-041-2357
Mounting Plate

270412357
2ABEP00630: RNCC: 2 | RNVC: 1

8 May 2008

5340-27-024-2252
Mounting Plate

270242252
205130: RNCC: 2 | RNVC: 1
205130: RNCC: 5 | RNVC: 9

2 Oct 2004

5340-27-057-7942
Headless Straight Rod

270577942
7930341418010: RNCC: 2 | RNVC: 1

22 Oct 2012

5340-27-040-7931
Retaining Clip

270407931
MK434951: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-036-8951
Engine Accessory Bracket

270368951
865172-1: RNCC: 2 | RNVC: 1

4 Jul 2007

5340-27-040-4813
Metal Takoz

270404813
2854314-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-011-8254
Dust And Moisture Seal Protective Plug

270118254
X-X.36: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-029-3894
Kapak

270293894
11051YCL025: RNCC: 2 | RNVC: 1

24 Mar 2006

5340-27-001-7205
Screw Thread Insert

270017205
T41000570-7: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-27-044-7922
Retaining Clip

270447922
MS660174: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-024-7457
Helical Compression Spring Seat

270247457
05001FT0111: RNCC: 2 | RNVC: 1

30 Nov 2004

5340-27-014-4365
Retaining Clip

270144365
2T1R 14A169 AA: RNCC: 2 | RNVC: 1

15 Oct 2002

5340-27-040-7937
Retaining Clip

270407937
MK447127: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-054-5468
Utility Resilient Mount

270545468
C71A61: RNCC: 2 | RNVC: 1

23 Sep 2011

5340-27-058-4524
Mounting Plate

270584524
1010FMA-1901213: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-027-7171
Antipilferage Seal

270277171
7151103: RNCC: 2 | RNVC: 1

24 Oct 2005

5340-27-017-5251
Dust And Moisture Seal Protective Cover

270175251
387.36.336.62: RNCC: 2 | RNVC: 1
754.36.336.62: RNCC: 2 | RNVC: 1

8 Jul 2003

5340-27-009-5631
Metal Olmay Tampon

270095631
7700822923: RNCC: 2 | RNVC: 1
7701204072: RNCC: 2 | RNVC: 1

26 Jul 2001

5340-27-046-8841
Tutucu

270468841
897381276051: RNCC: 2 | RNVC: 1

19 Oct 2009

5340-27-050-1645
Dust And Moisture Seal Protective Cover

270501645
108062: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-005-8701
Expansion Plug

270058701
3K19050: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-012-9969
Retaining Clip

270129969
46762998: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-008-0859
Mounting Plate

270080859
16HY1-300.019: RNCC: 2 | RNVC: 1

28 Jun 2000

5340-27-008-9574
Door Handle

270089574
54RS850325: RNCC: 2 | RNVC: 1

27 Feb 2001

5340-27-043-5543
Headless Straight Rod

270435543
12575821: RNCC: 2 | RNVC: 1

21 Nov 2008

5340-27-023-1552
Dust And Moisture Seal Protective Cover

270231552
21008T: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-015-6681
Retaining Strap

270156681
05001FC0001: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-018-9026
Retaining Clamp Assembly

270189026
111615224: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-045-0834
Retaining Clip

270450834
MS660243: RNCC: 2 | RNVC: 1

6 Apr 2009

5340-27-017-8048
Retaining Clip

270178048
10131YK0741: RNCC: 2 | RNVC: 1
10131YK0741: RNCC: 2 | RNVC: 1
10131YK0741: RNCC: 5 | RNVC: 2

9 Sep 2003

5340-27-020-3098
Yatak Kapak

270203098
4121PR0059: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-039-3984
Mounting Plate

270393984
10025668: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-017-4020
Mounting Plate

270174020
1009.1IS.0066-25: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-015-6964
Mounting Plate

270156964
10091KI0256: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-004-5716
Retaining Bail

270045716
10131YK0613: RNCC: 3 | RNVC: 2

20 May 1996

5340-27-053-0190
Retaining Clip

270530190
77 03 074 624: RNCC: 2 | RNVC: 2

16 Mar 2011

5340-27-024-2931
Retaining Clip

270242931
14720-17003: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-043-0910
Plaka

270430910
2ABEP00965: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-011-8249
Dust And Moisture Seal Protective Plug

270118249
8C-180: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-013-5424
Retaining Bail

270135424
6040-1132-8011: RNCC: 2 | RNVC: 1
6040-1132-8011: RNCC: 2 | RNVC: 1

27 Jun 2002

5340-27-059-2923
Yuksuk

270592923
F99/20002: RNCC: 5 | RNVC: 9

8 Jul 2013

5340-27-023-3405
Kapak

270233405
05001FK0143: RNCC: 2 | RNVC: 1

22 Jun 2004

5340-27-040-1798
Izalasyon Plakasi

270401798
20X1000X1300: RNCC: 5 | RNVC: 9

10 Jan 2008

5340-27-040-5091
Ara Parcasi

270405091
10916835: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-055-2298
Mounting Plate

270552298
6111.5500-11: RNCC: 2 | RNVC: 2

22 Nov 2011

5340-27-020-8739
Esnek Mesnet

270208739
ESR3172-L: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-3748
Extension Drawer Slide Section

270573748
BR43-400: RNCC: 5 | RNVC: 9

26 Jul 2012

5340-27-022-8768
Dust And Moisture Seal Protective Plug

270228768
96391-7103: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-022-2107
Mounting Plate

270222107
9BM 5340-00044: RNCC: 2 | RNVC: 1

19 Feb 2004

5340-27-048-9016
Panel

270489016
130-00333: RNCC: 2 | RNVC: 2

17 Mar 2010

5340-27-056-6611
Mounting Plate

270566611
MM-7412-0032: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-051-5773
Cushioning Pad

270515773
71A70-67034-AA: RNCC: 2 | RNVC: 1

8 Nov 2010

5340-27-044-6201
Mounting Plate

270446201
Y532-60101-206: RNCC: 2 | RNVC: 1

23 Feb 2009

5340-27-049-0929
Retaining Clip

270490929
7703079949: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-27-023-0607
Dust And Moisture Seal Protective Cap

270230607
151070054: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-032-7749
Dust And Moisture Seal Protective Cover

270327749
9919146: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-028-2140
Retaining Clip

270282140
7700516031: RNCC: 2 | RNVC: 1
7700560134: RNCC: 2 | RNVC: 1

14 Dec 2005

5340-27-049-5539
Key Blank

270495539
59321872: RNCC: 2 | RNVC: 1

7 May 2010

5340-27-020-5475
Mounting Plate

270205475
98014087: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-049-3114
Spring Holder

270493114
13C35-22045-AB: RNCC: 2 | RNVC: 1

20 Apr 2010

5340-27-017-7778
Dust And Moisture Seal Protective Cover

270177778
81.11110.0013: RNCC: 2 | RNVC: 1

1 Sep 2003

5340-27-016-9725
Helical Compression Spring Retainer

270169725
98003345: RNCC: 2 | RNVC: 1

24 Apr 2003

5340-27-025-8538
Cit Cit

270258538
P9907089: RNCC: 2 | RNVC: 1

20 Apr 2005

5340-27-042-6693
Mortise Latch Set

270426693
2ABEP00919: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-040-4676
Mounting Plate

270404676
10893734: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-041-7473
Utility Resilient Mount

270417473
27009: RNCC: 2 | RNVC: 1

13 Jun 2008

5340-27-025-8808
Dust And Moisture Seal Protective Cap Set

270258808
5402-1100-30: RNCC: 2 | RNVC: 1
5402-1100-30: RNCC: 5 | RNVC: 9

25 Apr 2005

5340-27-024-5950
Mounting Plate

270245950
1010FK-0000150: RNCC: 2 | RNVC: 1

13 Nov 2004

5340-27-032-4485
Dust And Moisture Seal Protective Cover

270324485
83A00-58347-AA: RNCC: 2 | RNVC: 1

14 Jul 2006

5340-27-044-5426
Tutucu

270445426
BA4-06401-020000: RNCC: 2 | RNVC: 1
BA4-06401-020000: RNCC: 5 | RNVC: 9

16 Feb 2009

5340-27-044-5897
Koruyucu Kapak

270445897
12E00-15081-AB: RNCC: 2 | RNVC: 1

19 Feb 2009

5340-27-021-3038
Retaining Bail

270213038
10131YK0713: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-5736
Retaining Clip

270345736
E860063S72: RNCC: 2 | RNVC: 1

24 Jan 2007

5340-27-039-6312
Dust And Moisture Seal Protective Cap

270396312
YTE.190.EM.002.027: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-021-4399
Mounting Plate

270214399
1009.1KI.0263-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-1315
Utility Resilient Mount

270211315
1009.1KI.0350-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-4647
Utility Resilient Mount

270484647
88.96020-0218: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-018-6740
Mounting Plate

270186740
1010FK-2704057: RNCC: 2 | RNVC: 1
255-01-11: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-8850
Takma-Sokme Aparat

270578850
203725: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-053-3801
Mounting Plate

270533801
H341201400: RNCC: 2 | RNVC: 1

26 Apr 2011

5340-27-039-3312
Extension Drawer Slide Section

270393312
KAHVERENGI-350MM: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-013-7535
Dust And Moisture Seal Protective Plug

270137535
30033T: RNCC: 2 | RNVC: 1
W700563 S300: RNCC: 2 | RNVC: 1
20450778-4: RNCC: 2 | RNVC: 1
20450778: RNCC: 3 | RNVC: 1
20450778-4: RNCC: 3 | RNVC: 1

19 Jul 2002

5340-27-059-5952
Utility Resilient Mount

270595952
010A-E15: RNCC: 2 | RNVC: 1

13 Sep 2013

5340-27-021-5222
Mounting Plate

270215222
12.4410.08: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-8135
Retaining Clip

270098135
7703079398: RNCC: 2 | RNVC: 1

12 Sep 2001

5340-27-035-5350
Retaining Clip

270355350
46436365: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-054-3757
Dust And Moisture Seal Protective Plug

270543757
77 03 074 646: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-043-0175
Cushioning Pad

270430175
40.685.2112: RNCC: 2 | RNVC: 1
40.685.2112: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-012-9955
Retaining Clip

270129955
14631487: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-036-1559
Dust And Moisture Seal Protective Plug

270361559
E857224S304: RNCC: 2 | RNVC: 1

4 May 2007

5340-27-013-5103
Sliding Door Track Bracket

270135103
YC15 B161T00 AD: RNCC: 2 | RNVC: 1

25 Jun 2002

5340-27-039-5606
Utility Resilient Mount

270395606
3.08.01.52: RNCC: 2 | RNVC: 1

7 Dec 2007

5340-27-050-6169
Izgara

270506169
180140-000-0: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-008-8787
Retaining Clip

270088787
8K202617: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-001-2233
Mounting Bracket

270012233
42303: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-27-024-2895
Dust And Moisture Seal Protective Plug

270242895
17313-25000: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-033-8916
Dust And Moisture Seal Protective Cover

270338916
13C00-23050-AA: RNCC: 2 | RNVC: 1

28 Nov 2006

5340-27-001-6884
Buckle

270016884
IK0085: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-27-021-8488
Manual Control Lever

270218488
1009 1AD 0022: RNCC: 2 | RNVC: 1

6 Jan 2004

5340-27-019-8082
Vehicular Seat Bracket

270198082
1010FG-1831018: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-5693
Retaining Bail

270275693
6009-4037-3004: RNCC: 2 | RNVC: 1

12 Oct 2005

5340-27-033-0381
Spring Holder

270330381
5K57578: RNCC: 2 | RNVC: 1

11 Oct 2006

5340-27-040-2148
Double Angle Bracket

270402148
40-205-5302: RNCC: 2 | RNVC: 1
40-205-5302: RNCC: 2 | RNVC: 1

14 Jan 2008

5340-27-034-8607
Dust And Moisture Seal Protective Cover

270348607
13C00-08253-AA: RNCC: 2 | RNVC: 1

12 Feb 2007

5340-27-040-6041
Mounting Plate

270406041
Y532-68300-200: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-017-8730
Retaining Strap

270178730
2.HIBM-4L-268/2-13-14: RNCC: 2 | RNVC: 1

1 Oct 2003

5340-27-049-7344
Retaining Bail

270497344
MP002318: RNCC: 2 | RNVC: 1

25 May 2010

5340-27-009-0168
Protection Bellows

270090168
8K93052: RNCC: 2 | RNVC: 1

29 Mar 2001

5340-27-010-2714
Multiple Angle Bracket

270102714
10131YK0762: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-022-8181
Helical Compression Spring Seat

270228181
8859111: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-034-7210
Headless Straight Rod

270347210
511A08: RNCC: 2 | RNVC: 1

2 Feb 2007

5340-27-003-9232
Manual Control Lever

270039232
186-447: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-008-8265
Retaining Clip

270088265
46444373: RNCC: 2 | RNVC: 1

25 Jan 2001

5340-27-040-4636
Metal Takoz

270404636
2862318-2: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-040-5209
Ara Parcasi

270405209
12257559-1: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-012-4961
Manual Control Handle

270124961
99VT V16624 AA: RNCC: 2 | RNVC: 1

4 Feb 2002

5340-27-014-8525
Manual Control Lever

270148525
D4109022: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-010-2166
Rim Latch Set

270102166
DZJD000004: RNCC: 2 | RNVC: 1

15 Nov 2001

5340-27-042-3649
Firca Sap

270423649
SAP-AYARLI: RNCC: 2 | RNVC: 1

11 Aug 2008

5340-27-055-5622
Klavuz Kablo

270555622
83A19-61954-AA: RNCC: 2 | RNVC: 1

12 Dec 2011

5340-27-048-9142
Tutucu

270489142
SRT-STA-ALU-400096110: RNCC: 2 | RNVC: 2

17 Mar 2010

5340-27-013-7803
Buckle

270137803
8972 S1: RNCC: 2 | RNVC: 1

23 Jul 2002

5340-27-045-5717
Mounting Plate

270455717
DF 407 965 AE: RNCC: 2 | RNVC: 1

15 May 2009

5340-27-024-4843
Mounting Plate

270244843
1009 1YH 0018: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-016-7469
Retaining Clip

270167469
46783925: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-036-3709
Retaining Clip

270363709
46543351: RNCC: 2 | RNVC: 1

28 May 2007

5340-27-055-4129
Utility Resilient Mount

270554129
5098239: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-006-9942
Manual Control Handle

270069942
91AB A638K88 BA: RNCC: 2 | RNVC: 1

8 Jul 1999

5340-27-012-2178
Retaining Clip

270122178
95VB V044C62 AB: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-020-5557
Threaded End Tensioning Tie Rod

270205557
10131YM0131: RNCC: 2 | RNVC: 1

12 Dec 2003

5340-27-017-4037
Mounting Plate

270174037
1009.1IS.0070-10: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-6797
Dust And Moisture Seal Protective Cover

270256797
45-7361-8061: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-019-0431
Helical Compression Spring Retainer

270190431
10-7980-20: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-2610
Mounting Plate

270552610
UG 017000 POZ-13: RNCC: 2 | RNVC: 1
UG 017000 POZ-13: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-003-8242
Electronic Equipment Hardware Kit

270038242
6009-0516-4003: RNCC: 2 | RNVC: 1
6009-0516-4003: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-044-2721
Dust And Moisture Seal Protective Plug

270442721
81.96002-0529: RNCC: 2 | RNVC: 1

21 Jan 2009

5340-27-055-2073
Kutu Numarator

270552073
N002: RNCC: 5 | RNVC: 9

21 Nov 2011

5340-27-025-4053
Case Corner

270254053
330A22-2244-23: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-055-7160
Nut And Bolt Locking Plate

270557160
5087674: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-020-5711
Dust And Moisture Seal Protective Cover

270205711
897146873051: RNCC: 2 | RNVC: 1

12 Dec 2003

5340-27-054-0632
Mounting Plate

270540632
98019103: RNCC: 2 | RNVC: 2

20 Jul 2011

5340-27-056-6370
Utility Resilient Mount

270566370
ASVC6000: RNCC: 2 | RNVC: 1
DM010600: RNCC: 2 | RNVC: 1

19 Apr 2012

5340-27-018-6915
Cushioning Pad

270186915
1010FK-1811385: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-3922
Doner Govd Tekerlek

270273922
BT0166: RNCC: 2 | RNVC: 1

30 Sep 2005

5340-27-053-8557
Baglama Ayagi

270538557
AK-7060100: RNCC: 2 | RNVC: 2

29 Jun 2011

5340-27-025-1931
Door Handle

270251931
9BM 5340-00186: RNCC: 2 | RNVC: 1

27 Jan 2005

5340-27-018-6377
Cushioning Pad

270186377
1010FG-0306168-3: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-9186
Headless Straight Rod

270569186
F01-01-008: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-055-1997
Mounting Plate

270551997
UG 036000 POZ-12: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-022-0684
Headless Straight Rod

270220684
45-3114-1803: RNCC: 2 | RNVC: 1

5 Feb 2004

5340-27-014-9168
Threaded Rod End

270149168
13-510-02: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-027-6045
Esnek Mesnet

270276045
7150734: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-017-8373
Manual Control Lever

270178373
27942: RNCC: 2 | RNVC: 1

22 Sep 2003

5340-27-003-8286
Electronic Equipment Hardware Kit

270038286
5999-0310-2212: RNCC: 2 | RNVC: 1
5999-0310-2212: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-057-0274
Montaj Ayak

270570274
2.HIBM-4H-0666/4/L-0012: RNCC: 2 | RNVC: 1

11 Jun 2012

5340-27-029-6329
Metal Olmay Tampon

270296329
5PS-21639-00-00: RNCC: 5 | RNVC: 9

26 Apr 2006

5340-27-050-1095
Olcme Aparati

270501095
102-F4908-8216-008-000-0: RNCC: 2 | RNVC: 1

24 Jun 2010

5340-27-034-0819
Utility Resilient Mount

270340819
1455456701: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-028-8472
Retaining Clip

270288472
MU481161: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-008-9721
Manual Control Lever

270089721
98001290: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-059-8993
Mounting Plate

270598993
18 DX-F06: RNCC: 2 | RNVC: 1

4 Dec 2013

5340-27-020-5673
Headless Straight Rod

270205673
388889022001: RNCC: 2 | RNVC: 1

12 Dec 2003

5340-27-052-4179
Utility Resilient Mount

270524179
112100014R: RNCC: 2 | RNVC: 2

20 Jan 2011

5340-27-035-9828
Mounting Plate

270359828
10024779: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-048-1170
Retaining Clip

270481170
12E00-33824-AA: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-27-017-4070
Access Door Hinge

270174070
1009.1IS.0066-46: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-1044
Retaining Clip

270481044
7703044041: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-039-1876
Dust And Moisture Seal Protective Plug

270391876
83A24-73370-AA: RNCC: 2 | RNVC: 1

16 Nov 2007

5340-27-050-9048
Adaptor

270509048
63D-48237-00: RNCC: 2 | RNVC: 2

14 Sep 2010

5340-27-022-9842
Utility Resilient Mount

270229842
12505-1081: RNCC: 2 | RNVC: 1

8 May 2004

5340-27-004-6735
Manual Control Handle

270046735
1.HIBM-1I-1524 D4: RNCC: 3 | RNVC: 2

15 Aug 1996

5340-27-057-1723
Kapak

270571723
8-004-0005-19: RNCC: 2 | RNVC: 1

27 Jun 2012

5340-27-009-1879
Retaining Clip

270091879
7700834206: RNCC: 2 | RNVC: 1

18 May 2001

5340-27-004-5697
Pipe Hanger Extension Bar

270045697
10131YC0069: RNCC: 3 | RNVC: 2

20 May 1996

5340-27-040-7965
Door Handle

270407965
SARI KAPI KOLU, AYNALI: RNCC: 2 | RNVC: 1
YILDIZBRONZ: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-040-7930
Retaining Clip

270407930
MS470058: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-052-9313
Retaining Clip

270529313
80 28 432 30R: RNCC: 3 | RNVC: 2

8 Mar 2011

5340-27-048-2745
Retaining Strap

270482745
4364750720: RNCC: 2 | RNVC: 2
4364750720: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-27-010-2708
Retaining Clip

270102708
7703079027: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-057-9953
Retaining Clip

270579953
24343-ZW1-B02: RNCC: 2 | RNVC: 1

28 Nov 2012

5340-27-016-7498
Utility Resilient Mount

270167498
46803907: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-049-1539
Mounting Plate

270491539
1010FK-1911406: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-038-1230
Engine Accessory Bracket

270381230
865220: RNCC: 2 | RNVC: 1

14 Sep 2007

5340-27-039-6979
Dust And Moisture Seal Protective Plug

270396979
8131937: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-022-2506
Dust And Moisture Seal Protective Cap

270222506
PROD-CSTL-0716: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-038-5108
Mounting Plate

270385108
MM-7450-0037: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-017-4129
Mounting Plate

270174129
98013388: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-043-6359
Tekerlek

270436359
9BM 5340-00650: RNCC: 2 | RNVC: 1

27 Nov 2008

5340-27-022-5373
Tespit Parca

270225373
9BM 5340-00081: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-005-8139
Rod End Clevis

270058139
88VT-7L063-AC: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-27-009-5662
Metal Olmay Tampon

270095662
7663916: RNCC: 2 | RNVC: 1

26 Jul 2001

5340-27-026-8416
Tutucu

270268416
05001FT0141: RNCC: 2 | RNVC: 1

4 Aug 2005

5340-27-024-4344
Dust And Moisture Seal Protective Plug

270244344
28178-22000: RNCC: 2 | RNVC: 1

27 Oct 2004

5340-27-056-1782
Dust And Moisture Seal Protective Cover

270561782
98022773: RNCC: 2 | RNVC: 2

28 Feb 2012

5340-27-059-3855
Headless Straight Rod

270593855
77364569: RNCC: 2 | RNVC: 1

25 Jul 2013

5340-27-048-9524
Mounting Plate

270489524
40.631.1106: RNCC: 2 | RNVC: 1

22 Mar 2010

5340-27-021-5287
Key Blank

270215287
10131MA0089: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-5045
Metal Olmay Tampon

270245045
82191-38010: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-022-1313
Dust And Moisture Seal Protective Cap

270221313
1.HIBM-1R-1111: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-017-8774
Runner

270178774
H-39-0569-53: RNCC: 2 | RNVC: 1

1 Oct 2003

5340-27-055-3078
Dust And Moisture Seal Protective Cover

270553078
83A19-62006-AA: RNCC: 2 | RNVC: 1

29 Nov 2011

5340-27-015-9912
Protection Bellows

270159912
7701 468 576: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-008-9612
E Montaj Malzemesi

270089612
7K200227: RNCC: 2 | RNVC: 1

28 Feb 2001

5340-27-017-4086
Dust And Moisture Seal Protective Plug

270174086
1.HIBM-1I-2046: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-3408
Mounting Plate

270213408
1009.1KI.0143-4: RNCC: 2 | RNVC: 1
1009.1KI.0147-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-1418
Kapak

270561418
UG 036000 POZ-2: RNCC: 5 | RNVC: 9

20 Feb 2012

5340-27-021-1302
Utility Resilient Mount

270211302
1009.1KI.0109-2: RNCC: 2 | RNVC: 1
1009.1KI.0111-2: RNCC: 2 | RNVC: 1
1009.1KI.0182-2: RNCC: 2 | RNVC: 1
1009.1KI.0110-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-3331
Mentese Karsiligi

270223331
9BM 5340-00048: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-036-7145
Metal Olmay Tampon

270367145
CK001: RNCC: 2 | RNVC: 1

20 Jun 2007

5340-27-051-7325
Utility Resilient Mount

270517325
16F36-30118-AA: RNCC: 2 | RNVC: 1

24 Nov 2010

5340-27-007-3192
Manual Control Lever

270073192
3011R-302900.01: RNCC: 2 | RNVC: 1

19 Oct 1999

5340-27-018-3290
Case Corner

270183290
10121YG5466: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-9477
Utility Resilient Mount

270369477
C70H78: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-023-1236
Double Angle Bracket

270231236
1010FG-0000767: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-050-6756
Tampon

270506756
377AC04: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-27-052-8899
Mesnet

270528899
1010FK-1301009-4: RNCC: 2 | RNVC: 1

3 Mar 2011

5340-27-019-5782
Metal Olmay Tampon

270195782
07002YA0192: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-9811
Muhafaza

270489811
2ABEP01187: RNCC: 2 | RNVC: 1

23 Mar 2010

5340-27-026-2532
Kol

270262532
58RS504133: RNCC: 2 | RNVC: 1

22 Jun 2005

5340-27-049-7871
Clamp

270497871
3-OCT1-11095-73: RNCC: 3 | RNVC: 2

31 May 2010

5340-27-050-0192
Ara Parcasi

270500192
1000151-214-090: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-048-2658
Kaucu Tampon Seridi

270482658
269.04.3: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-026-0934
Mounting Plate

270260934
MKE 300 311-X: RNCC: 2 | RNVC: 1

2 Jun 2005

5340-27-045-2707
Havalandirma Boru

270452707
F06/14010: RNCC: 2 | RNVC: 1

21 Apr 2009

5340-27-022-3763
Electromagnetic Lock

270223763
PML-1101: RNCC: 2 | RNVC: 1
PML-1101: RNCC: 5 | RNVC: 9
PML-1101: RNCC: 5 | RNVC: 9
PML-1101: RNCC: 5 | RNVC: 9

3 Mar 2004

5340-27-021-4506
Spring Tension Clip

270214506
3IML-0226: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-0049
Metal Olmay Tampon

270170049
6009-0532-8059: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-025-2762
Access Door Hinge

270252762
205-030-033-16: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-055-2770
Metal Pencere Kol

270552770
PVC KANAT KOLU 128X87 MM: RNCC: 5 | RNVC: 9

28 Nov 2011

5340-27-014-6202
Mounting Plate

270146202
5999-0310-9042: RNCC: 2 | RNVC: 1
5999-0310-9042: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-010-1376
Metal Olmay Tampon

270101376
73B00-33134-AA: RNCC: 2 | RNVC: 1

7 Nov 2001

5340-27-025-4812
Dust And Moisture Seal Protective Cover

270254812
A22A5-12181: RNCC: 2 | RNVC: 1

22 Mar 2005

5340-27-021-2101
Manual Control Lever

270212101
1012.1HSCA.07-01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-1148
Retaining Strap

270531148
102091-500: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-020-1536
Utility Resilient Mount

270201536
7700779772: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-037-3942
Headless Straight Rod

270373942
6M58132: RNCC: 2 | RNVC: 1

26 Jul 2007

5340-27-059-5230
Utility Resilient Mount

270595230
00354082: RNCC: 2 | RNVC: 1

2 Sep 2013

5340-27-005-1782
Half Grooved Segment

270051782
1010001753: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-057-1980
Baglanti Parcasi

270571980
2.HIBM-4H-0666/4/Y-0003: RNCC: 2 | RNVC: 1

2 Jul 2012

5340-27-043-2775
Kapa Surgu Sistemi

270432775
SKM 80: RNCC: 2 | RNVC: 1

23 Oct 2008

5340-27-052-2015
Dust And Moisture Seal Protective Cover

270522015
8.216.876.000.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-040-4631
Metal Takoz

270404631
2854313-9: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-014-7427
Dust And Moisture Seal Protective Cap Set

270147427
8K200017-8: RNCC: 2 | RNVC: 1

25 Nov 2002

5340-27-010-1863
Mounting Plate

270101863
98010183: RNCC: 2 | RNVC: 1

13 Nov 2001

5340-27-003-8263
Electronic Equipment Hardware Kit

270038263
6040-0516-4008: RNCC: 2 | RNVC: 1
6040-0516-4008: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-040-5231
Baglanti Parcasi

270405231
98000-0383: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-026-2046
Kol

270262046
10.4330.28: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-052-1896
Dust And Moisture Seal Protective Cover

270521896
16F10-71524-AA: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-008-1084
Lock-Release Lever

270081084
16HY1-305000.02: RNCC: 2 | RNVC: 1

6 Jul 2000

5340-27-045-7701
Mounting Plate

270457701
10029359: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-046-7937
Headless Straight Rod

270467937
JTE992364JBP: RNCC: 2 | RNVC: 1

9 Oct 2009

5340-27-037-6699
Pawl Fastener

270376699
DA0032641: RNCC: 2 | RNVC: 1

17 Aug 2007

5340-27-049-6228
Manual Control Handle

270496228
898013420051: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-022-1926
Mounting Plate

270221926
9BM 5340-00036: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-016-7473
Retaining Clip

270167473
7689821: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-020-1366
Instrument Mounting Clamp

270201366
7700529261: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-3402
Mounting Plate

270213402
1009.1KI.0147-1: RNCC: 2 | RNVC: 1
1009.1KI.0143-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-3035
Mounting Plate

270493035
1010FK-1911352-1: RNCC: 2 | RNVC: 1

19 Apr 2010

5340-27-040-3123
Meme Muhafaza

270403123
14R295A89: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-037-8960
Headless Straight Rod

270378960
DA0172242: RNCC: 2 | RNVC: 1

4 Sep 2007

5340-27-005-5939
Esnek Baglanti

270055939
92VB-4K007-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-024-0914
Dust And Moisture Seal Protective Cover

270240914
1924220106: RNCC: 2 | RNVC: 1
4.06.18.06: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-057-0963
Montaj Ayak

270570963
2.HIBM-4H-0666/7-0012: RNCC: 2 | RNVC: 1

19 Jun 2012

5340-27-046-8845
Tutucu

270468845
897406968051: RNCC: 2 | RNVC: 1

19 Oct 2009

5340-27-026-9678
Metal Olmay Tampon

270269678
2T143025AC: RNCC: 2 | RNVC: 1

15 Aug 2005

5340-27-020-8705
Double Angle Bracket

270208705
1010FG-0000396: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-2597
Mounting Plate

270552597
UG 009000 POZ-16: RNCC: 2 | RNVC: 1
UG 009000 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-037-2042
Engine Accessory Bracket

270372042
965544: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-032-2791
Access Door Hinge

270322791
MIL MENTESE 20 MM: RNCC: 5 | RNVC: 9

13 Jun 2006

5340-27-036-2466
Utility Resilient Mount

270362466
34.01.01.001.01I: RNCC: 5 | RNVC: 9

16 May 2007

5340-27-038-3332
Engine Accessory Bracket

270383332
1543589: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-012-9998
Retaining Clip

270129998
7744733: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-054-9369
Tutucu

270549369
41-3824039: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-039-3233
Kapak

270393233
20727018: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-040-5412
Yuksuk

270405412
8200804: RNCC: 2 | RNVC: 1

29 Jan 2008

5340-27-049-6235
Olcme Aparati

270496235
102-F490-8216-010-000-0: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-058-5970
Headless Straight Rod

270585970
8256056: RNCC: 5 | RNVC: 9

26 Feb 2013

5340-27-040-3852
Mounting Plate

270403852
8762419: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-011-0918
Manual Control Lever

270110918
7116710434: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-055-2820
Mounting Plate

270552820
H346075100: RNCC: 2 | RNVC: 1

28 Nov 2011

5340-27-041-8516
Utility Resilient Mount

270418516
T0008: RNCC: 2 | RNVC: 1
T0008: RNCC: 2 | RNVC: 1

25 Jun 2008

5340-27-023-8884
Manual Control Lever

270238884
10121YK0857: RNCC: 2 | RNVC: 1

14 Aug 2004

5340-27-024-4097
Sabit Govd Tekerlek

270244097
SMT-0003: RNCC: 2 | RNVC: 1

22 Oct 2004

5340-27-023-3054
Quick Release Plunger

270233054
M3.2.2: RNCC: 2 | RNVC: 1
M3.2.2: RNCC: 2 | RNVC: 1

18 Jun 2004

5340-27-026-6624
Clamping Catch Fastener

270266624
45-3116-2466: RNCC: 2 | RNVC: 1

19 Jul 2005

5340-27-044-2711
Dust And Moisture Seal Protective Plug

270442711
81.96002-0409: RNCC: 2 | RNVC: 1

21 Jan 2009

5340-27-028-3194
Dust And Moisture Seal Protective Plug

270283194
7150358: RNCC: 2 | RNVC: 1

22 Dec 2005

5340-27-009-7268
Dust And Moisture Seal Protective Plug

270097268
7518 82: RNCC: 2 | RNVC: 1

23 Aug 2001

5340-27-011-8213
Dust And Moisture Seal Protective Cap

270118213
8C-169: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-008-4211
Dedektor Sap

270084211
6040-0516-1011: RNCC: 2 | RNVC: 1
6040-0516-1011: RNCC: 2 | RNVC: 1

6 Oct 2000

5340-27-020-3273
Koruklu Lastik

270203273
7700550785: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-025-4057
Case Corner

270254057
330A22-2243-30: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-045-5256
Utility Resilient Mount

270455256
MR450097: RNCC: 3 | RNVC: 2

13 May 2009

5340-27-042-9656
Mounting Plate

270429656
40.205.3502: RNCC: 2 | RNVC: 1
40.205.3502: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-009-5804
Retaining Clip

270095804
81.62680.0058: RNCC: 2 | RNVC: 1

30 Jul 2001

5340-27-008-6416
Mounting Plate

270086416
98005315: RNCC: 2 | RNVC: 1

7 Dec 2000

5340-27-028-5835
Retaining Clip

270285835
W702248S300: RNCC: 2 | RNVC: 1

18 Jan 2006

5340-27-044-6397
Dust And Moisture Seal Protective Cover

270446397
83A24-76232-AA: RNCC: 2 | RNVC: 1

26 Feb 2009

5340-27-010-1968
Surgulu Destek

270101968
DZJC000119: RNCC: 2 | RNVC: 1

14 Nov 2001

5340-27-025-9491
Kaucuk Tampon

270259491
05001FT0127: RNCC: 2 | RNVC: 1

9 May 2005

5340-27-014-3715
Dust And Moisture Seal Protective Cap-Plug

270143715
2T14 3569 AD: RNCC: 2 | RNVC: 1

9 Oct 2002

5340-27-025-9202
Kaucuk Tampon

270259202
10131YT0708: RNCC: 2 | RNVC: 1

3 May 2005

5340-27-003-8289
Electronic Equipment Hardware Kit

270038289
5999-0311-1042: RNCC: 2 | RNVC: 1
5999-0311-1042: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-028-5842
Retaining Clip

270285842
W706396S300: RNCC: 2 | RNVC: 1

18 Jan 2006

5340-27-022-8841
Dust And Moisture Seal Protective Plug

270228841
20561T: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-038-7196
Kapak

270387196
10091YC0137: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-056-8820
Mounting Plate

270568820
800-05-01-00: RNCC: 2 | RNVC: 1

23 May 2012

5340-27-049-2911
Dust And Moisture Seal Protective Cover

270492911
8200402498: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-27-049-7678
Takviyeli Kosebent

270497678
MP002006: RNCC: 2 | RNVC: 1

27 May 2010

5340-27-016-7827
Mounting Plate

270167827
CE30-0081-02: RNCC: 2 | RNVC: 1

13 Mar 2003

5340-27-048-6594
Monta Plaka Takimi

270486594
10046305: RNCC: 2 | RNVC: 1

18 Feb 2010

5340-27-049-7850
Cover

270497850
8AT.0201.000.249: RNCC: 3 | RNVC: 2

31 May 2010

5340-27-007-4146
Expansion Plug

270074146
9797: RNCC: 2 | RNVC: 1

8 Nov 1999

5340-27-022-4968
Utility Resilient Mount

270224968
07001YT0240: RNCC: 2 | RNVC: 1

16 Mar 2004

5340-27-045-9142
Doner Govd Tekerlek

270459142
50 MM: RNCC: 2 | RNVC: 1

19 Jun 2009

5340-27-036-6717
Govde Ici Ar Doseme

270366717
58RS111693: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-021-7603
Kapi Vurma Kolu (Ta

270217603
TAKTAK, KAPI: RNCC: 2 | RNVC: 1

26 Dec 2003

5340-27-055-3430
Mounting Plate

270553430
1692-0214: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-049-8610
Kilit

270498610
VTL-103-27: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-027-6370
Baglanti Elemani

270276370
PSV55-117: RNCC: 2 | RNVC: 1

17 Oct 2005

5340-27-038-1569
Utility Resilient Mount

270381569
091-03-000: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-028-4168
Retaining Strap

270284168
72A04-61620-AA: RNCC: 2 | RNVC: 1

29 Dec 2005

5340-27-022-5584
Retaining Clip

270225584
PROD-CSTL-0724: RNCC: 2 | RNVC: 1

23 Mar 2004

5340-27-051-8370
Mortise Bolt

270518370
89VBV22138AD: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-27-036-2987
Dust And Moisture Seal Protective Plug

270362987
46811729: RNCC: 2 | RNVC: 1

22 May 2007

5340-27-023-0889
Protection Bellows

270230889
26787T: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-042-3989
Protection Bellows

270423989
6C11 4A084AA: RNCC: 2 | RNVC: 1

13 Aug 2008

5340-27-037-9473
Expansion Shield

270379473
DUBEL 10MM: RNCC: 5 | RNVC: 9

6 Sep 2007

5340-27-016-8942
Dust And Moisture Seal Protective Plug

270168942
51.91606.0100: RNCC: 2 | RNVC: 1

4 Apr 2003

5340-27-022-2692
Dust And Moisture Seal Protective Plug

270222692
10121YT0120: RNCC: 2 | RNVC: 1

23 Feb 2004

5340-27-022-4711
Retaining Clip

270224711
43514445771: RNCC: 2 | RNVC: 1
43514445771: RNCC: 5 | RNVC: 9

12 Mar 2004

5340-27-039-3252
Dust And Moisture Seal Protective Cap-Plug

270393252
20547976: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-006-9797
Lastik Takoz

270069797
81DB4002AA: RNCC: 2 | RNVC: 1
93AT F42579 AA: RNCC: 2 | RNVC: 1

7 Jul 1999

5340-27-036-6417
Door Handle

270366417
KAPI KOLU-100MM: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-059-1635
Montaj Ray

270591635
40.6010.400000: RNCC: 5 | RNVC: 9

10 Jun 2013

5340-27-009-4810
Metal Olmay Tampon

270094810
7700785788: RNCC: 2 | RNVC: 1

12 Jul 2001

5340-27-055-8180
Muffler

270558180
38001004: RNCC: 2 | RNVC: 2
38001004: RNCC: 5 | RNVC: 9

6 Jan 2012

5340-27-025-1544
Kapak

270251544
05001FK0247: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-026-2715
Kose Profil

270262715
BITIM KAPLAMASI,DIS: RNCC: 2 | RNVC: 1

23 Jun 2005

5340-27-037-9530
Dust And Moisture Seal Protective Cover

270379530
69690-11102: RNCC: 5 | RNVC: 9

6 Sep 2007

Load More Results