What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 4 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 4 of 53

5340-27-048-2665
Butt Hinge Leaf

270482665
269.06.2: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-033-6427
Mechanical Stop

270336427
40-205-2345: RNCC: 2 | RNVC: 1
40-205-2345: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-022-9272
Mounting Bracket

270229272
24V0511691: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-051-1455
Mounting Bracket

270511455
16F10-68240-AA: RNCC: 2 | RNVC: 1

6 Oct 2010

5340-27-040-6173
Angle Bracket

270406173
7716749: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-020-7860
Mounting Bracket

270207860
1009.1KI.0339-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0743
Flush Catch

270210743
1009.1KI.0308-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-2171
Access Cover

270382171
3583633: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-038-2230
Mounting Bracket

270382230
3812944: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-013-6527
Mortise Lock

270136527
K.ODA-GOMME: RNCC: 2 | RNVC: 1
6110: RNCC: 2 | RNVC: 1
GOMME: RNCC: 2 | RNVC: 1
GOMME, ODA KILIDI: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-27-015-0412
Loop Clamp

270150412
7717897: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-014-6521
Angle Bracket

270146521
6030-0516-1001: RNCC: 2 | RNVC: 1
6030-0516-1001: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-037-9929
Mending Plate

270379929
046-10-007: RNCC: 2 | RNVC: 1

7 Sep 2007

5340-27-025-7692
Screw Hook

270257692
2ABM 1IMZA 0001/07: RNCC: 2 | RNVC: 1

7 Apr 2005

5340-27-017-3548
Rod End Clevis

270173548
1009.1IS.0068-B/13: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-028-7786
Mounting Bracket

270287786
884-5810-918: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-034-2360
Bail Handle

270342360
U TIPI DOLAP KULPU: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-025-8764
Handle Grip

270258764
10091HP0009: RNCC: 2 | RNVC: 1

25 Apr 2005

5340-27-036-4248
Mending Plate

270364248
HCT5T514AA: RNCC: 2 | RNVC: 1

5 Jun 2007

5340-27-048-0379
Mounting Bracket

270480379
S-017: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-006-9219
Mounting Bracket

270069219
91AG A19495 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-013-0075
Vent Plug

270130075
THPB00120-169: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-056-4639
Mending Plate

270564639
MM-7560-0371: RNCC: 3 | RNVC: 2

2 Apr 2012

5340-27-049-6640
Mounting Bracket

270496640
040000-014-0: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-021-1291
Mending Plate

270211291
1010FG-0000323: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-9959
Mounting Bracket

270429959
40.624.0172: RNCC: 2 | RNVC: 1
40.624.0172: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-007-1747
Retaining Clip

270071747
E 865839 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-015-6784
Clevis And U-Bolt

270156784
05001FC0002: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7825
Mending Plate

270207825
1009.1KI.0132-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-6450
Angle Bracket

270276450
1.HIBM-1H-989: RNCC: 2 | RNVC: 1

17 Oct 2005

5340-27-040-3925
Mounting Bracket

270403925
7084509: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-042-5657
Mending Plate

270425657
54546171: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-001-7288
Loop Clamp

270017288
TM55-1520-210-2MS21919WDG-6: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-040-6493
Webbing Strap

270406493
30X3,5: RNCC: 2 | RNVC: 1

15 Feb 2008

5340-27-036-5850
Mounting Bracket

270365850
C56B83: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-009-1988
Mounting Bracket

270091988
98005129: RNCC: 2 | RNVC: 1

23 May 2001

5340-27-032-4601
Retaining Strap

270324601
1439.07: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-045-7192
Loop Clamp

270457192
124OCT11209075: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-021-3057
Mortise Lock

270213057
10131MK0627: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-4199
Mounting Bracket

270204199
98013929: RNCC: 2 | RNVC: 1

8 Dec 2003

5340-27-059-1569
Loop Clamp

270591569
KJR175-127: RNCC: 5 | RNVC: 9

7 Jun 2013

5340-27-015-8668
Butt Hinge

270158668
99999-NIIN-DA0061144: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-021-5352
Mending Plate

270215352
1010FG-0100914: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-4893
Mending Plate

270514893
400282-003: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-021-2118
Mounting Bracket

270212118
1012.1HSCA.01-05: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-4883
Mounting Bracket

270514883
400253-003: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-041-8797
Mending Plate

270418797
05205: RNCC: 2 | RNVC: 1
05205: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-055-1495
Mending Plate

270551495
98022458: RNCC: 2 | RNVC: 2

16 Nov 2011

5340-27-021-4072
Mounting Bracket

270214072
1009.1KI.0266-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-7611
Mounting Bracket

270477611
7700694013: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-27-017-3687
Pad Eye

270173687
1009.1IS.0041-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-6939
Mounting Bracket

270176939
H-39-0468-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-044-4804
Sliding Door Track

270444804
12E01-55410-AA: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-007-1834
Access Cover

270071834
E 857073 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-049-4767
Mounting Bracket

270494767
108127: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-005-4540
Rod End Clevis

270054540
1696545-1: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-049-4739
Mending Plate

270494739
104545: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-051-0089
Mounting Bracket

270510089
6E5-43145-01: RNCC: 3 | RNVC: 2
6E5-43145-01: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-048-5104
Mending Plate

270485104
HD150875Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-021-0150
Mechanical Stop

270210150
1009.1KI.0147-2: RNCC: 2 | RNVC: 1
1009.1KI.0143-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-0977
Angle Bracket

270130977
81.97486.0468: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-059-7580
Mounting Bracket

270597580
1010FMA-1801315: RNCC: 2 | RNVC: 1

25 Oct 2013

5340-27-037-8273
Mounting Bracket

270378273
83A00-76064-AA: RNCC: 2 | RNVC: 1

28 Aug 2007

5340-27-053-5622
Utility Access Door

270535622
257X88 CM ISI YALITIMLI: RNCC: 2 | RNVC: 1

20 May 2011

5340-27-021-5359
Mending Plate

270215359
1010FG-0000288: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-4745
Mounting Bracket

270234745
21645T: RNCC: 2 | RNVC: 1

3 Jul 2004

5340-27-056-8672
Mending Plate

270568672
202273: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-057-6331
Mounting Bracket

270576331
ALTFC01345: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-026-0752
Butt Hinge Leaf

270260752
1010FK-1804733-1: RNCC: 2 | RNVC: 1

31 May 2005

5340-27-022-6630
Loop Clamp

270226630
27323: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-006-9054
Angle Bracket Set

270069054
A 425 910 01 78: RNCC: 2 | RNVC: 1

23 Jun 1999

5340-27-044-4072
Synchro Clamp

270444072
81.97103-0006: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-004-5115
Access Cover

270045115
10121YK5245: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-010-2877
Mounting Bracket

270102877
10131YS0746: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-047-9242
Mounting Bracket

270479242
13C25-03764-AA: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-060-0355
Mounting Bracket

270600355
MM-7490-0135: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-047-0545
Handle Grip

270470545
73B00-57475-AA: RNCC: 2 | RNVC: 1

30 Oct 2009

5340-27-013-2451
Loop Clamp

270132451
53407777700032: RNCC: 2 | RNVC: 1
KEL.D-15MM: RNCC: 2 | RNVC: 1
53407777700032: RNCC: 2 | RNVC: 1
KELEPCE 1/2": RNCC: 2 | RNVC: 1
KELEPCE 1/2": RNCC: 2 | RNVC: 1
90465-10098-00: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-043-7980
Mounting Bracket

270437980
3316748: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-050-9111
Mounting Bracket

270509111
63D-48531-00: RNCC: 2 | RNVC: 2

15 Sep 2010

5340-27-035-1808
Bow Handle

270351808
85005437: RNCC: 2 | RNVC: 1

1 Mar 2007

5340-27-044-3159
Mounting Bracket

270443159
40.621.0104: RNCC: 2 | RNVC: 1
40.621.0104: RNCC: 2 | RNVC: 1

26 Jan 2009

5340-27-056-5029
Mending Plate

270565029
203428: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-001-7889
Loop Clamp

270017889
TM55-1520-210-3AN735-064: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-049-4237
Flush Lock

270494237
131-8452-006: RNCC: 3 | RNVC: 2

29 Apr 2010

5340-27-024-2333
Bow Handle

270242333
85340-2D600YL: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-059-5558
Angle Bracket

270595558
901-DS-119: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-038-1078
Mounting Bracket

270381078
944-65-401: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-013-9666
Mounting Bracket

270139666
6040-0522-8016: RNCC: 2 | RNVC: 1
6040-0522-8016: RNCC: 2 | RNVC: 1

19 Aug 2002

5340-27-006-8218
Mounting Bracket

270068218
5820-4600-0913: RNCC: 2 | RNVC: 1
5820-4600-0913: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-054-9586
Access Cover

270549586
T530-H3001-300: RNCC: 2 | RNVC: 1

26 Oct 2011

5340-27-020-7849
Mending Plate

270207849
1009.1KI.0177-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-9685
Angle Bracket

270229685
209-070-423-5: RNCC: 2 | RNVC: 1

8 May 2004

5340-27-020-8912
Mounting Bracket

270208912
1010-1YA-0050: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-5745
Tee Hinge

270405745
7701207664: RNCC: 2 | RNVC: 1

31 Jan 2008

5340-27-020-7904
Mounting Bracket

270207904
1009.1KI.0264-2*2-8.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6638
Loop Clamp

270596638
901-KL-388: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-050-8190
Mending Plate

270508190
79C00-58180-AA: RNCC: 2 | RNVC: 1

1 Sep 2010

5340-27-028-7557
Mounting Bracket

270287557
884-5810-940: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-029-6658
Mending Plate

270296658
3LD-13371-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-058-1741
Mending Plate

270581741
24895-ZV5-000: RNCC: 2 | RNVC: 1

19 Dec 2012

5340-27-024-5152
Mending Plate

270245152
86115-22000: RNCC: 2 | RNVC: 1

6 Nov 2004

5340-27-059-2714
Mounting Bracket

270592714
55RS752610: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-044-6497
Mounting Bracket

270446497
1C1H19E754BA: RNCC: 2 | RNVC: 1

27 Feb 2009

5340-27-016-3949
Mending Plate

270163949
81.42701.2451: RNCC: 2 | RNVC: 1

10 Jan 2003

5340-27-021-1209
Plug Button

270211209
821386: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7180
Mounting Bracket

270227180
8011752-90: RNCC: 2 | RNVC: 1

10 Apr 2004

5340-27-017-5266
Metal Grille

270175266
387.36.336.36: RNCC: 2 | RNVC: 1
754.36.336.36: RNCC: 2 | RNVC: 1

8 Jul 2003

5340-27-023-0087
Mounting Bracket

270230087
1010FK-0000163: RNCC: 2 | RNVC: 1

12 May 2004

5340-27-028-2312
Mounting Bracket

270282312
MM-7450-0096-KNM52: RNCC: 2 | RNVC: 1

15 Dec 2005

5340-27-027-5280
Mounting Bracket

270275280
71A80-30352-AB: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-028-8547
Mounting Bracket

270288547
MR117870: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-018-8653
Mortise Lock

270188653
11051DK0022: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-047-7847
Utility Access Door

270477847
180X210CM, ISI YALITIMLI: RNCC: 2 | RNVC: 1

17 Dec 2009

5340-27-033-6280
Mounting Bracket

270336280
40-205-3965: RNCC: 2 | RNVC: 1
40-205-3965: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-012-0872
Loop Clamp

270120872
92FB 9K155 BB: RNCC: 2 | RNVC: 1
4008509: RNCC: 2 | RNVC: 1
90464-13249-00: RNCC: 2 | RNVC: 1

11 Jan 2002

5340-27-039-6316
Mounting Bracket

270396316
YTE.190.EM.002.028: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-038-2172
Access Cover

270382172
3583637: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-033-6293
Mounting Bracket

270336293
40-205-3310: RNCC: 2 | RNVC: 1
40-205-3310: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-024-2968
Mounting Bracket

270242968
1010FK-0000240: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-047-9025
Bridge Clamp

270479025
2 1/2" KELEPCE: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-057-4761
Loop Holder

270574761
7251092: RNCC: 5 | RNVC: 9

14 Aug 2012

5340-27-037-2401
Sliding Door Track

270372401
58RS112042: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-051-7500
Blank Panel

270517500
MP002803: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-023-3307
Handle Grip

270233307
2540TMAK9880001: RNCC: 2 | RNVC: 1

19 Jun 2004

5340-27-021-3091
Mending Plate

270213091
1012.1HSCA.02-13: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-8177
Bow Handle

270328177
4330322: RNCC: 2 | RNVC: 1

20 Sep 2006

5340-27-021-9779
Rod End Clevis

270219779
1010F-2600140-3: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-047-0093
Mounting Bracket

270470093
73B00-55081-AA: RNCC: 2 | RNVC: 1

26 Oct 2009

5340-27-006-8888
Mounting Bracket

270068888
A 436 545 00 40: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-007-1718
Elastic Strap

270071718
E 863269 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-007-1607
Retaining Clip

270071607
E 860220 S81: RNCC: 2 | RNVC: 1

10 Sep 1999

5340-27-005-1778
Vent Plug

270051778
1010001798: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-059-0256
Loop Clamp

270590256
VOE967531: RNCC: 3 | RNVC: 2
VOE967531: RNCC: 3 | RNVC: 2

16 May 2013

5340-27-013-6323
Access Cover

270136323
P2018: RNCC: 2 | RNVC: 1

4 Jul 2002

5340-27-038-7334
Mounting Bracket

270387334
10091YY0011: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-051-2935
Loop Clamp

270512935
55RS860136: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-050-9403
Access Cover

270509403
2311 2101 00: RNCC: 3 | RNVC: 2
2311 2101 00: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-27-055-0150
Butt Hinge

270550150
72A99-52016-AA: RNCC: 2 | RNVC: 1

28 Oct 2011

5340-27-038-3302
Mounting Bracket

270383302
387003352001: RNCC: 2 | RNVC: 1

28 Sep 2007

5340-27-007-3353
Mounting Bracket

270073353
200 001 005: RNCC: 2 | RNVC: 1
MOD.2.22: RNCC: 2 | RNVC: 1

21 Oct 1999

5340-27-056-1024
Mounting Bracket

270561024
UG 009000 POZ-7: RNCC: 2 | RNVC: 1

10 Feb 2012

5340-27-021-0332
Mounting Bracket

270210332
1009.1KI.0339-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-037-2625
Angle Bracket

270372625
3584088: RNCC: 2 | RNVC: 1

20 Jul 2007

5340-27-022-8219
Loop Clamp

270228219
7.08.02.05: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-051-4104
Mending Plate

270514104
105915: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-018-2386
Access Cover

270182386
3.01.03.06: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-055-3652
Mounting Bracket

270553652
57RS309479: RNCC: 2 | RNVC: 1

1 Dec 2011

5340-27-034-6118
Mounting Bracket

270346118
536A05: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-027-2586
Angle Bracket

270272586
15-01-475-513: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-059-6598
Loop Clamp

270596598
901-KL-378: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-048-7991
Access Cover

270487991
7055-20: RNCC: 2 | RNVC: 1
7055-20: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-055-2857
Mounting Bracket

270552857
C6032-CST-0003: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-27-025-8500
Mounting Bracket

270258500
1010FG-1300713: RNCC: 2 | RNVC: 1

20 Apr 2005

5340-27-048-7310
Mounting Bracket

270487310
5420260: RNCC: 2 | RNVC: 1

24 Feb 2010

5340-27-036-7529
Mounting Bracket

270367529
90TKVJA0304: RNCC: 2 | RNVC: 1

22 Jun 2007

5340-27-042-8374
Mending Plate

270428374
72B02-36213-AA: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-053-5624
Utility Access Door

270535624
198X91.5 CM ISI YALITIMLI: RNCC: 2 | RNVC: 1

20 May 2011

5340-27-019-6259
Elbow Catch

270196259
05001HC0315: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-1092
Mending Plate

270511092
107503: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-044-4071
Synchro Clamp

270444071
81.97103-0005: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-032-8604
Mounting Bracket

270328604
13C00-01715-AA: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-056-8030
Flush Catch

270568030
7111230212: RNCC: 2 | RNVC: 1

14 May 2012

5340-27-037-9356
Mounting Bracket

270379356
911-06-102: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-040-4520
Mounting Bracket

270404520
8389018: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-044-5503
Mounting Bracket

270445503
05001FS0276: RNCC: 2 | RNVC: 1

16 Feb 2009

5340-27-049-1389
Angle Bracket

270491389
1C445A204AB: RNCC: 3 | RNVC: 2

6 Apr 2010

5340-27-028-2592
Bridge Clamp

270282592
40 MM: RNCC: 5 | RNVC: 9

16 Dec 2005

5340-27-056-3517
Access Cover

270563517
3833328: RNCC: 2 | RNVC: 2

16 Mar 2012

5340-27-035-3943
Mending Plate

270353943
3241A021: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-050-0584
Mending Plate

270500584
102875: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-026-5779
Bow Handle

270265779
53601-52010: RNCC: 2 | RNVC: 1

13 Jul 2005

5340-27-024-4096
Caster Wheel

270244096
SMT-0002: RNCC: 2 | RNVC: 1

22 Oct 2004

5340-27-040-5200
Mounting Bracket

270405200
8762382: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-014-3011
Sliding Door Track

270143011
2T14 V25006 BD: RNCC: 2 | RNVC: 1

4 Oct 2002

5340-27-021-1576
Mounting Bracket

270211576
1009.1KI.0264-2*2-4.1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-0965
Angle Bracket

270130965
81.97487.0806: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-034-9802
Mounting Bracket

270349802
12E00-08046-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-039-1641
Mounting Bracket

270391641
83A24-73515-AA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-009-6882
Mounting Bracket

270096882
9033 64: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-001-2714
Clamp Bolt Assembly

270012714
102510004: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-015-7224
Flush Lock

270157224
10091MT0757: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-4015
Mounting Bracket

270214015
1012.1HSCA.02-18: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-4074
Synchro Clamp

270444074
81.97430-0032: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-059-6832
Loop Clamp

270596832
901-KL-398: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-009-4853
Bail Handle

270094853
07002YK0602: RNCC: 2 | RNVC: 1

12 Jul 2001

5340-27-008-3204
Latch Bar

270083204
MKE 400 143: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-056-8689
Mending Plate

270568689
202614: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-016-4226
Mending Plate

270164226
7700704343: RNCC: 2 | RNVC: 1

15 Jan 2003

5340-27-018-2225
Access Cover

270182225
27542: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-043-9294
Lock Key

270439294
02026030003: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-050-3883
Mending Plate

270503883
107818: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-006-9234
Mounting Bracket

270069234
91AG A24391 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-021-1294
Mending Plate

270211294
1010FK-0000361: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-6789
Loop Holder

270556789
1.HIBM-1I-3063: RNCC: 2 | RNVC: 1

26 Dec 2011

5340-27-032-8431
Mounting Bracket

270328431
1.HIBM-1I-2413: RNCC: 2 | RNVC: 1

21 Sep 2006

5340-27-060-0222
Crank Handle

270600222
M521D327000100: RNCC: 2 | RNVC: 1

26 Dec 2013

5340-27-015-0405
Loop Clamp

270150405
7703691: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-2139
Mounting Bracket

270212139
1012.1HSCA.08-20: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1572
Loop Clamp

270051572
1010002022: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-015-0434
Loop Clamp

270150434
7978884: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-024-3066
Mending Plate

270243066
2K206878: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-004-5700
Catch Strike

270045700
10131YMN0108: RNCC: 2 | RNVC: 1

20 May 1996

5340-27-038-8243
Handle Grip

270388243
KALIP NO:388: RNCC: 2 | RNVC: 1

1 Nov 2007

5340-27-057-7455
Mending Plate

270577455
F002D14005: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-032-7768
Mounting Bracket

270327768
13C00-08054-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-033-9006
Loop Clamp

270339006
305351220801: RNCC: 2 | RNVC: 1

28 Nov 2006

5340-27-019-8912
Flush Catch Claw

270198912
1010FG-1802408: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-1912
Pad Eye

270241912
05001FM0089: RNCC: 2 | RNVC: 1

28 Sep 2004

5340-27-058-3703
Mending Plate

270583703
CV71859: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-018-6968
Mounting Bracket

270186968
1010FG-1831026: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-1436
Expansion Plug

270221436
10121YT5507: RNCC: 2 | RNVC: 1
51916060005: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-040-4678
Mounting Bracket

270404678
11674504: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-021-4557
Mortise Lock Set

270214557
07002YK0038: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3103
Mending Plate

270213103
1012.1HSCA.02-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4109
Mounting Bracket

270214109
1009.1KI.0302-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-9420
Rod End Clevis

270179420
1009 1KI 0228-6: RNCC: 2 | RNVC: 1

14 Oct 2003

5340-27-006-9488
Mounting Bracket

270069488
91AG A10203 AH: RNCC: 2 | RNVC: 1

1 Jul 1999

5340-27-017-9163
Mending Plate

270179163
1009 1KI 0228-5: RNCC: 2 | RNVC: 1

7 Oct 2003

5340-27-059-7042
Loop Clamp

270597042
901-KL-410: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-046-6786
Mounting Bracket

270466786
Y532-67003-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-005-3366
Access Door Hinge

270053366
97K5A4025: RNCC: 2 | RNVC: 1

29 Jul 1997

5340-27-012-7047
Handle Grip

270127047
8B70190: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-010-0460
Key Holder

270100460
81.97118.0027: RNCC: 2 | RNVC: 1

25 Oct 2001

5340-27-012-1914
Mending Plate

270121914
10131YS0801: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-042-3700
Strap Hinge

270423700
14CM: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-040-8018
Mending Plate

270408018
ME508914: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-038-7214
Mounting Bracket

270387214
4189265: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-006-9050
Angle Bracket Set

270069050
A 425 426 33 40: RNCC: 2 | RNVC: 1

23 Jun 1999

5340-27-020-7818
Mounting Bracket

270207818
1009.1KI.0352-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-9347
Catch Strike

270099347
98012418-2: RNCC: 2 | RNVC: 1

12 Oct 2001

5340-27-029-0119
Bow Handle

270290119
EST000010-L: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-007-1741
Retaining Clip

270071741
E 865633 S76: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-044-7312
Mending Plate

270447312
81.62530-2338: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-055-2162
Mounting Bracket

270552162
1692-0218: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-053-6863
Mending Plate

270536863
C171-700130: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-055-3395
Mounting Bracket

270553395
1692-0189: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-051-4136
Mending Plate

270514136
108220: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-054-0461
Bridge Clamp

270540461
98018613: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-050-1563
Mending Plate

270501563
107416: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-045-9317
Loop Clamp

270459317
8AT4104001: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-057-9879
Mounting Bracket

270579879
40157-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-006-9024
Mounting Bracket

270069024
A 437 426 10 40: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-018-1192
Rod End Clevis

270181192
7.14.02.01: RNCC: 2 | RNVC: 1

3 Nov 2003

5340-27-029-6657
Mending Plate

270296657
1AA-12535-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-028-9369
Mending Plate

270289369
10003960: RNCC: 2 | RNVC: 1

16 Feb 2006

5340-27-038-7341
Handle Grip

270387341
10091YT1286: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-057-6844
Bumper

270576844
3000044: RNCC: 2 | RNVC: 1

24 Sep 2012

5340-27-009-5828
Bridge Clamp

270095828
81.66420.0040: RNCC: 2 | RNVC: 1

30 Jul 2001

5340-27-055-9186
Mounting Bracket

270559186
58RS510552: RNCC: 2 | RNVC: 1

13 Jan 2012

5340-27-009-5829
Bridge Clamp

270095829
81.97445.0210: RNCC: 2 | RNVC: 1

30 Jul 2001

5340-27-038-8914
Mounting Bracket

270388914
7335792289: RNCC: 2 | RNVC: 1

5 Nov 2007

5340-27-038-1039
Mounting Bracket

270381039
068-55-006: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-021-2120
Mounting Bracket

270212120
1012.1HSCA.01-02: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-8477
Angle Bracket

270228477
SKCP2283-19: RNCC: 2 | RNVC: 1

27 Apr 2004

5340-27-056-8684
Mending Plate

270568684
202606: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-054-3658
Mending Plate

270543658
98021605: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-058-6757
Mending Plate

270586757
ADOP-SHELTER-250-BT: RNCC: 2 | RNVC: 1

12 Mar 2013

5340-27-057-9560
Mending Plate

270579560
16041-ZY3-000: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-025-2870
Catch Strike

270252870
100-060-2: RNCC: 2 | RNVC: 1

17 Feb 2005

5340-27-055-0162
Mounting Bracket

270550162
72C09-36420-AA: RNCC: 2 | RNVC: 1

28 Oct 2011

5340-27-048-7966
Access Cover

270487966
9035-75: RNCC: 2 | RNVC: 1
9035-75: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-059-7649
Mending Plate

270597649
6040-0037-2010: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-021-0324
Mounting Bracket

270210324
1009.1KI.0236-1*4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-6895
Utility Access Door

270436895
AL-2495X1005 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-017-9276
Mechanical Stop

270179276
901-LS-15: RNCC: 2 | RNVC: 1

10 Oct 2003

5340-27-020-9509
Mending Plate

270209509
1010FG-0000353: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-9238
Mounting Bracket

270479238
13C25-08146-AA: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-059-5504
Angle Bracket

270595504
901-DS-115: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-051-0101
Access Cover

270510101
63D-45111-11-4D: RNCC: 3 | RNVC: 2
63D-45111-11-4D: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-059-7658
Mounting Bracket

270597658
9999-0000-0343: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-053-4568
Plain Solid Disk

270534568
901-KA-241: RNCC: 2 | RNVC: 1

9 May 2011

5340-27-046-6779
Access Cover

270466779
Y255-71000-204: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-027-2577
Angle Bracket

270272577
15-01-414-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-005-6362
Coat And Hat Hook

270056362
76VB-V310K18-AAFA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-028-7728
Mounting Bracket

270287728
884-5800-800: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-017-4244
Angle Bracket

270174244
EIBM-AA5-823: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-008-9359
Mounting Bracket

270089359
98005358-2: RNCC: 2 | RNVC: 1

23 Feb 2001

5340-27-018-7555
Mending Plate

270187555
901-DP-38: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4254
Webbing Strap

270214254
6015-0110-1001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-5796
Angle Bracket

270325796
40-770-0198: RNCC: 2 | RNVC: 1
40-770-0198: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-057-3488
Mending Plate

270573488
MM-7560-0300: RNCC: 2 | RNVC: 1

23 Jul 2012

5340-27-060-0388
Mounting Bracket

270600388
MM-7490-0168: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-027-9919
Angle Bracket

270279919
6015-2336-8001: RNCC: 2 | RNVC: 1

23 Nov 2005

5340-27-058-2426
Mounting Bracket

270582426
MM-7560-0351: RNCC: 2 | RNVC: 1

25 Dec 2012

5340-27-055-2183
Mounting Bracket

270552183
1692-0155: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-018-2904
Butt Hinge

270182904
M01-10G: RNCC: 2 | RNVC: 1
MENTESE,OKKA,SATEN: RNCC: 2 | RNVC: 1

6 Jul 2004

5340-27-021-4509
Mechanical Stop

270214509
3IML-0301: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-9682
Access Cover

270509682
63D-45214-00: RNCC: 3 | RNVC: 2
63D-45214-00: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-27-049-7247
Angle Bracket

270497247
MCT1222118-001: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-043-6900
Utility Access Door

270436900
AL-2425X2525 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-028-7791
Mounting Bracket

270287791
884-5810-931: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-018-2254
Loop Clamp

270182254
204-070-048-13: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-049-4837
Mending Plate

270494837
107560-101: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-042-0524
Mounting Bracket

270420524
Y531-61004-212: RNCC: 2 | RNVC: 1

15 Jul 2008

5340-27-027-6041
Mounting Bracket

270276041
71B22-55503-AA: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-032-6575
Mounting Bracket

270326575
40-685-5005: RNCC: 2 | RNVC: 1
40-685-5005: RNCC: 2 | RNVC: 1

31 Aug 2006

5340-27-058-2118
Mending Plate

270582118
11861-ZY3-000: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-050-5106
Bridge Clamp

270505106
DIN-3015-L-KP-5-G-35-PA: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-013-2205
Pad Eye

270132205
1010003231: RNCC: 2 | RNVC: 1

16 May 2002

5340-27-049-8367
Rod End Connector

270498367
7335793698: RNCC: 2 | RNVC: 1
71-53: RNCC: 2 | RNVC: 1

4 Jun 2010

5340-27-050-3887
Mending Plate

270503887
108482: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-037-9105
Bow Handle

270379105
73940-FA300: RNCC: 5 | RNVC: 9

5 Sep 2007

5340-27-017-3760
Bail Handle

270173760
1009.1IS.0071-B6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-009-0148
Catch Strike

270090148
8M86102: RNCC: 2 | RNVC: 1

29 Mar 2001

5340-27-017-4240
Angle Bracket

270174240
EIBM-AA4-900-I-6: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-054-3023
Arched Cushion

270543023
98020375: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-013-2344
Elastic Strap

270132344
1010003225: RNCC: 2 | RNVC: 1
K-2344: RNCC: 2 | RNVC: 1

17 May 2002

5340-27-019-9290
Angle Bracket

270199290
MTC6827-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0372
Mounting Bracket

270600372
MM-7490-0603: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-020-3206
Lock Key

270203206
3.02.10.08: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-046-8189
Bow Handle

270468189
897408305051: RNCC: 2 | RNVC: 1

12 Oct 2009

5340-27-041-9574
Mounting Bracket

270419574
5-011-002-1: RNCC: 2 | RNVC: 1

3 Jul 2008

5340-27-043-3517
Lock-Release Lever

270433517
83A00-55048-AA: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-026-6088
Filler Opening Cap

270266088
85316-02070: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-036-4046
Mounting Bracket

270364046
46778131: RNCC: 2 | RNVC: 1

31 May 2007

5340-27-039-3334
Butt Hinge

270393334
MINI DUZ TAS MENTESE: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-001-7280
Loop Clamp

270017280
TM55-1520-210-245C20AA-D12: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-020-8908
Mounting Bracket

270208908
2510-ATF-0072: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-1324
Angle Bracket

270431324
TMS-P304-10: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-028-6186
Mounting Bracket

270286186
MM-7450-0097-KNM2: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-046-3111
Mounting Bracket

270463111
71C00-03010-AA: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-041-9113
Strap Fastener Loop

270419113
901-SK-180: RNCC: 2 | RNVC: 1

1 Jul 2008

5340-27-018-8764
Strap Fastener Loop

270188764
11051YK0255: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-044-7092
Retaining Clip

270447092
KEW00060-101: RNCC: 1 | RNVC: 2

5 Mar 2009

5340-27-052-1119
Mounting Bracket

270521119
1010FK-0604441: RNCC: 2 | RNVC: 1

20 Dec 2010

5340-27-027-8486
Catch Strike

270278486
72B04-55010-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-015-7295
Butt Hinge

270157295
16001DM0078: RNCC: 2 | RNVC: 1
16001DM0078: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-5092
Loop Clamp

270535092
N07/4311627: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-028-7608
Mounting Bracket

270287608
884-5810-964: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-018-6317
Mounting Bracket

270186317
1010FG-0306108: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-6543
Mounting Bracket

270426543
72A91-60160-AA: RNCC: 2 | RNVC: 1

3 Sep 2008

5340-27-032-5438
Mounting Bracket

270325438
83A11-60220-AA: RNCC: 2 | RNVC: 1

2 Aug 2006

5340-27-028-7550
Mounting Bracket

270287550
884-5810-938: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-026-0028
Loop Holder

270260028
1604545982: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-006-2816
Mounting Bracket

270062816
72A10-30354-AA: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-27-021-3085
Mending Plate

270213085
1012.1HSCA.02-09: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-2435
Mechanical Stop

270252435
MM-7550-0622: RNCC: 2 | RNVC: 1

8 Feb 2005

5340-27-056-7055
Mounting Bracket

270567055
1230-7412-0053K/06: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-043-2905
Mounting Bracket

270432905
01053-5610-01: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-050-8828
Access Cover

270508828
63D-44312-00: RNCC: 3 | RNVC: 2
63D-44312-00: RNCC: 3 | RNVC: 2

7 Sep 2010

5340-27-056-7069
Mounting Bracket

270567069
ADOP-SHELTER-180-KKK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-036-7952
Mounting Bracket

270367952
5340-TJ-03209: RNCC: 2 | RNVC: 1

28 Jun 2007

5340-27-029-7216
Access Cover

270297216
T530-G3100-000: RNCC: 2 | RNVC: 1

5 May 2006

5340-27-057-7462
Mounting Bracket

270577462
5083048: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-001-2991
Loop Clamp

270012991
205-030-713-016: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-043-6908
Utility Access Door

270436908
AL-2000X895 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-037-5447
Expansion Plug

270375447
48408-11H00: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-044-1232
Mending Plate

270441232
12E00-05027-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-018-6534
Mounting Bracket

270186534
1010FG-0705951: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0562
Mounting Bracket

270600562
MM-7490-0344: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-007-0186
Handle Grip

270070186
95AB A240K03 ADW: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-038-1061
Mounting Bracket

270381061
044-05-102: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-052-3208
Mortise Lock

270523208
102887: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-27-053-8131
Bridge Clamp

270538131
A544-110600: RNCC: 2 | RNVC: 2

23 Jun 2011

5340-27-049-9087
Mounting Bracket

270499087
061220-00-0: RNCC: 2 | RNVC: 1

10 Jun 2010

5340-27-027-4368
Mounting Bracket

270274368
0000-GK-003-4282: RNCC: 2 | RNVC: 1

4 Oct 2005

5340-27-024-3410
Flush Catch

270243410
7440-000-0456: RNCC: 2 | RNVC: 1
7440-0000-0456: RNCC: 2 | RNVC: 1

14 Oct 2004

5340-27-049-7715
Bow Handle

270497715
897405315151: RNCC: 2 | RNVC: 1

28 May 2010

5340-27-038-0095
Bow Handle

270380095
68430-FA300: RNCC: 5 | RNVC: 9

10 Sep 2007

5340-27-014-7510
Roller Holder

270147510
505082201: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-017-3894
Section Block Clamp

270173894
1009.1IS.0082: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-056-4569
Mending Plate

270564569
202879: RNCC: 2 | RNVC: 2

30 Mar 2012

5340-27-042-5708
Mending Plate

270425708
54560370: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-023-1578
Mounting Bracket

270231578
2ABMK 00245: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-024-8995
Thumb Latch

270248995
11741648-205: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-044-6179
Mounting Bracket

270446179
Y533-78102-000: RNCC: 2 | RNVC: 1

23 Feb 2009

5340-27-053-6859
Butt Hinge

270536859
C171-700040: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-050-8429
Loop Clamp

270508429
90465-18147: RNCC: 3 | RNVC: 2
90465-18147: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-009-1269
Loop Clamp

270091269
2106006505: RNCC: 2 | RNVC: 1
BG-01-02-034: RNCC: 2 | RNVC: 1
10131MK0500: RNCC: 2 | RNVC: 1
90465-08125-00: RNCC: 2 | RNVC: 1

7 May 2001

5340-27-021-6346
Loop Clamp

270216346
KELEPCE 1": RNCC: 2 | RNVC: 1
KELEPCE 1'': RNCC: 5 | RNVC: 9
KELEPCE 1": RNCC: 5 | RNVC: 9

22 Dec 2003

5340-27-059-1107
Expansion Plug

270591107
1.HIBM-1H-1391: RNCC: 2 | RNVC: 1

28 May 2013

5340-27-020-7166
Handle Ferrule

270207166
1240-ATF-0110: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4327
Mounting Bracket

270214327
1012.1HSCA.06-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-4087
Access Cover

270094087
10131YK0203: RNCC: 2 | RNVC: 1

29 Jun 2001

5340-27-022-1794
Handle Grip

270221794
13UT1-310100.02: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-024-5402
Mounting Bracket

270245402
116-231: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-017-5366
Mounting Bracket

270175366
MP001054: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-016-3948
Mending Plate

270163948
81.41610.0080: RNCC: 2 | RNVC: 1

10 Jan 2003

5340-27-022-7279
Mounting Bracket

270227279
27371: RNCC: 2 | RNVC: 1

13 Apr 2004

5340-27-044-2895
Mending Plate

270442895
81.41610-0392: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-006-9170
Mounting Bracket

270069170
91AG 6K018 AB: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-015-6786
Angle Bracket

270156786
05001FT0021: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-5368
Mounting Bracket

270175368
MP001697: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-041-0527
Butt Hinge

25 Apr 2008

5340-27-012-5546
Mounting Bracket

270125546
10131YS0836: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-019-5205
Butt Hinge

270195205
07002YM0272: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-5107
Access Cover

270045107
10121YK5070: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-023-3429
Crank Handle

270233429
58RS103557: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-015-6790
Access Cover

270156790
05001FK0021: RNCC: 2 | RNVC: 1
291665: RNCC: 2 | RNVC: 1
293387: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-9493
Mending Plate

270209493
1010FG-0000245: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-8953
Butt Hinge

270158953
99999-NIIN-DA0019955: RNCC: 2 | RNVC: 1
100 MM: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-032-2051
Mounting Bracket

270322051
5JJ-27315-00-00: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-018-8652
Handle Grip

270188652
11051DK0019: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-3874
Mending Plate

270503874
105566: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-021-0175
Lever Bracket

270210175
1009.1KI.0345-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-5139
Mounting Bracket

270235139
1010FK-3515131: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-019-5680
Bail Handle

270195680
05001HT0274: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-8960
Handle Grip

270188960
11051YM0121: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-2991
Mounting Bracket

270432991
74A05-62118-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-027-4830
Flush Catch

270274830
6009-0534-1015: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-029-0067
Mounting Bracket

270290067
10121YD5418: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-005-1454
Retaining Strap

270051454
1010000443: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-028-3239
Mounting Bracket

270283239
72A04-76146-AA: RNCC: 2 | RNVC: 1

22 Dec 2005

5340-27-039-1673
Mending Plate

270391673
N35 PLAKA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-010-2715
Mounting Bracket

270102715
10131YS0812: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-059-5023
Clamping Catch

270595023
VOE12745503: RNCC: 3 | RNVC: 2
VOE12745503: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-27-040-8641
Mending Plate

270408641
ME409310: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-042-5121
Key Holder

270425121
60604: RNCC: 2 | RNVC: 1

20 Aug 2008

5340-27-056-4803
Mending Plate

270564803
202165: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-017-3724
Eye Hook

270173724
1009.1IS.0071-D15: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-033-6379
Access Cover

270336379
901-GK-25: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-036-0489
Padlock

270360489
22A04-30340-AA: RNCC: 2 | RNVC: 1
83A11-35340-AA: RNCC: 2 | RNVC: 1
70A00-30340-AA: RNCC: 2 | RNVC: 1

24 Apr 2007

5340-27-056-6654
Mounting Bracket

270566654
MK-0000-1339: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-048-4660
Bridge Clamp

270484660
BW318020012A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-048-4459
Bow Handle

270484459
6020671: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-021-2374
Butt Hinge

270212374
10131MM0054: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-6496
Catch Strike

270546496
8200000571: RNCC: 2 | RNVC: 1

5 Oct 2011

5340-27-043-0108
Mounting Bracket

270430108
40.650.1106: RNCC: 2 | RNVC: 1
40.650.1106: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-044-1475
Mounting Bracket

270441475
12E00-70268-AB: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-054-6034
Mounting Bracket

270546034
55RS752949: RNCC: 4 | RNVC: 2

30 Sep 2011

5340-27-007-8869
Handle Grip

270078869
9059587: RNCC: 2 | RNVC: 1

12 Apr 2000

5340-27-058-3140
Mending Plate

270583140
0490 5325: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-055-8939
Mending Plate

270558939
58RS114356: RNCC: 2 | RNVC: 1

12 Jan 2012

5340-27-024-9807
Mortise Lock

270249807
01-201-311: RNCC: 2 | RNVC: 1

22 Dec 2004

5340-27-050-0683
Mending Plate

270500683
103543: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-005-1777
Clamping Catch

270051777
1010001316: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-049-8358
Bridge Clamp

270498358
700325050104: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-005-1520
Mortise Latch

270051520
1010001806: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-7098
Mounting Bracket

270567098
MM-7412-0271: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-021-3100
Mending Plate

270213100
1012.1HSCA.03-33: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-6888
Mounting Bracket

270556888
54RS721114: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-026-0411
Rod Retainer Clip

270260411
897075929201: RNCC: 2 | RNVC: 1

25 May 2005

5340-27-051-7423
Mending Plate

270517423
1177118: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-041-3653
Utility Access Door

270413653
81X196 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-055-9180
Access Cover

270559180
58RS50388: RNCC: 2 | RNVC: 1

13 Jan 2012

5340-27-019-5202
Handle Grip

270195202
07002YT0268: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-7444
Mending Plate

270547444
202170: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-053-9297
Mending Plate

270539297
98017899: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-050-6139
Expansion Shield

270506139
IDGM8075: RNCC: 5 | RNVC: 9

10 Aug 2010

5340-27-021-3058
Mortise Lock

270213058
10131MK0628: RNCC: 2 | RNVC: 1
10112DK1861: RNCC: 5 | RNVC: 9

15 Dec 2003

5340-27-046-7338
Mounting Bracket

270467338
2ABEP01140: RNCC: 2 | RNVC: 1

5 Oct 2009

5340-27-022-5470
Expansion Shield

270225470
CAS5: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-059-0245
Loop Clamp

270590245
VOE20460347: RNCC: 3 | RNVC: 2
VOE20460347: RNCC: 3 | RNVC: 2

16 May 2013

5340-27-024-4953
Hinge Torsion Bar

270244953
7336212624: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-056-4808
Mending Plate

270564808
203396: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-051-2828
Webbing Strap

270512828
KK0124580: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-039-3335
Butt Hinge

270393335
MINI DEVE BOYNU: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-053-8960
Mending Plate

270538960
109699: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-27-025-7790
Catch Strike

270257790
897859069051: RNCC: 2 | RNVC: 1

8 Apr 2005

5340-27-033-6401
Access Cover

270336401
901-GK-34: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-022-4727
Mounting Bracket

270224727
1010FK-0000349: RNCC: 2 | RNVC: 1

12 Mar 2004

5340-27-033-6382
Bow Handle

270336382
40-205-3380: RNCC: 2 | RNVC: 1
40-205-3380: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-058-3642
Expansion Plug

270583642
447-01056-2: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-021-3099
Mending Plate

270213099
1012.1HSCA.10-02: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-5048
Access Cover

270135048
YC15 V405A02 AF: RNCC: 2 | RNVC: 1

25 Jun 2002

5340-27-054-6623
Mounting Bracket

270546623
55RS752151: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-008-8850
Expansion Plug

270088850
8K230946: RNCC: 2 | RNVC: 1

8 Feb 2001

5340-27-042-5679
Mending Plate

270425679
54549167: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-056-8786
Mending Plate

270568786
98017132: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-005-6357
Angle Bracket

270056357
86VB-V28616-BA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-054-6673
Mounting Bracket

270546673
57RS309767: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-046-6582
Mounting Bracket

270466582
302639: RNCC: 2 | RNVC: 1

18 Sep 2009

5340-27-022-6891
Loop Clamp

270226891
4804 07: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-040-4662
Mounting Bracket

270404662
7385167: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-039-6397
Mounting Bracket

270396397
YTE.190.EM.002.036.001: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-057-0172
Mounting Bracket

270570172
202788: RNCC: 2 | RNVC: 1

8 Jun 2012

5340-27-029-8722
Mounting Bracket

270298722
83A11-66212-AA: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-021-8478
Catch Strike

270218478
5118T: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-017-4863
Extension Handle

270174863
98005236: RNCC: 2 | RNVC: 1

1 Jul 2003

5340-27-056-5457
Mending Plate

270565457
3834210: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-043-9379
Lock Key

270439379
02026030019: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-034-6105
Mounting Bracket

270346105
101E70: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-006-6802
Mounting Bracket

270066802
7023 9601 2804: RNCC: 2 | RNVC: 1

15 Mar 1999

5340-27-023-8065
Rod End Clevis

270238065
23365: RNCC: 2 | RNVC: 1
8765237: RNCC: 2 | RNVC: 1

7 Aug 2004

5340-27-018-2470
Rod End Clevis

270182470
27535: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-041-4149
Utility Access Door

270414149
90X43 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-039-3942
Filler Opening Cap

270393942
F32/21002: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-009-9328
Access Cover

270099328
98012345: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-035-7772
Bow Handle

270357772
735384563: RNCC: 2 | RNVC: 1

28 Mar 2007

5340-27-036-0857
Bridge Clamp

270360857
YCT296AA: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-045-8525
Bridge Clamp

270458525
7800065240: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-27-001-7748
Plug Button

270017748
15229: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-27-011-2445
Butt Hinge

270112445
07002YM0313: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-013-1833
Mending Plate

270131833
81.90750.2701: RNCC: 2 | RNVC: 1

10 May 2002

5340-27-038-1049
Mounting Bracket

270381049
044-03-007: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-042-5981
Mounting Bracket

270425981
2ABEP00827: RNCC: 2 | RNVC: 1

29 Aug 2008

5340-27-041-4099
Utility Access Door

270414099
97X195 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-019-5535
Mounting Bracket

270195535
07002YH0078: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-3654
Expansion Plug

270583654
3793398: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-004-5512
Expansion Plug

270045512
10091YT5033: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-016-5805
Handle Grip

270165805
53RS800786: RNCC: 2 | RNVC: 1

6 Feb 2003

5340-27-055-5099
Mounting Bracket

270555099
201388: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-016-9888
Mounting Bracket

270169888
51.11402.0098: RNCC: 2 | RNVC: 1

25 Apr 2003

5340-27-015-0679
Mending Plate

270150679
4189264: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-010-1894
Access Cover

270101894
98003045: RNCC: 2 | RNVC: 1

13 Nov 2001

5340-27-049-4927
Mending Plate

270494927
107520: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-015-9827
Mounting Bracket

270159827
7702 176 922: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-054-2849
Bow Handle

270542849
98022237: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-058-3653
Expansion Plug

270583653
3793607: RNCC: 2 | RNVC: 1

17 Jan 2013

Load More Results