What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 33 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 33 of 53

5340-27-020-2130
Dust And Moisture Seal Protective Cover

270202130
897107548051: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-027-5830
Headless Straight Rod

270275830
45047-19115: RNCC: 2 | RNVC: 1

12 Oct 2005

5340-27-040-6325
Support Block

270406325
12257198: RNCC: 2 | RNVC: 1

5 Feb 2008

5340-27-040-4838
Overall Cover

270404838
5124801: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-022-5918
Pim Mentese

270225918
16001DM0182: RNCC: 2 | RNVC: 1

26 Mar 2004

5340-27-008-0223
Dust And Moisture Seal Protective Cap

270080223
4B84062: RNCC: 2 | RNVC: 1

6 Jun 2000

5340-27-018-8773
Retaining Bail

270188773
11051YK0330: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-3125
Turnbuckle Body

270263125
05001HH0076: RNCC: 2 | RNVC: 1
05001HH0076: RNCC: 2 | RNVC: 1

28 Jun 2005

5340-27-005-1643
Protection Bellows

270051643
1010001719: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-043-0219
Mounting Plate

270430219
40.725.5003: RNCC: 2 | RNVC: 1
40.725.5003: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-023-4541
Mounting Plate

270234541
1010FK-2710403: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-017-8174
Dust And Moisture Seal Protective Cover

270178174
894447157001: RNCC: 2 | RNVC: 1

12 Sep 2003

5340-27-037-2466
Plastik Seperator

270372466
1X20METRE,RULO: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-018-2300
Parlatma Kecesi

270182300
10121HK0381: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-005-1463
Baglanti-Elektrik

270051463
1010001286: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-040-4884
Ara Parcasi

270404884
10864090: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-052-5229
Retaining Clip

270525229
24 13 856 48R: RNCC: 2 | RNVC: 1

3 Feb 2011

5340-27-034-0742
Utility Resilient Mount

270340742
81962210242: RNCC: 2 | RNVC: 1
81962210242: RNCC: 2 | RNVC: 1

8 Dec 2006

5340-27-035-5578
Engine Accessory Bracket

270355578
20393627: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-015-6941
Mounting Plate

270156941
10091KI0155: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-7212
Retaining Clamp Assembly

270157212
10091KI0164: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-012-4679
Dust And Moisture Seal Protective Plug

270124679
7701204546: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-035-5548
Engine Accessory Bracket

270355548
20412268: RNCC: 2 | RNVC: 1

19 Mar 2007

5340-27-017-5245
Access Hole Frame

270175245
387.36.336.55: RNCC: 2 | RNVC: 1
754.36.336.55: RNCC: 2 | RNVC: 1

8 Jul 2003

5340-27-057-5260
Utility Resilient Mount

270575260
ALTFC01212: RNCC: 2 | RNVC: 1

27 Aug 2012

5340-27-044-2568
Dust And Moisture Seal Protective Cap

270442568
17560-00: RNCC: 2 | RNVC: 1

20 Jan 2009

5340-27-052-2524
Mesnet Komplesi

270522524
1010FK-3512711: RNCC: 2 | RNVC: 1

29 Dec 2010

5340-27-055-6998
Utility Resilient Mount

270556998
5095137: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-015-0469
Mounting Plate

270150469
1010FK-1811356: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-036-7712
Retaining Clip

270367712
BR0024: RNCC: 2 | RNVC: 1

26 Jun 2007

5340-27-024-2374
Retaining Clip

270242374
31039-4A000: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-021-8645
Mounting Plate

270218645
1009 1AD 0025: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-050-6725
Yaslanma Kafesi

270506725
345AA43: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-27-045-4997
Dust And Moisture Seal Protective Cover

270454997
MN146488: RNCC: 3 | RNVC: 2

12 May 2009

5340-27-027-2260
Protection Bellows

270272260
2T144A084CA: RNCC: 2 | RNVC: 1

19 Sep 2005

5340-27-050-5079
Retaining Strap

270505079
108506: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-043-2627
Retaining Clip

270432627
1684561: RNCC: 2 | RNVC: 1

23 Oct 2008

5340-27-021-5383
Utility Resilient Mount

270215383
5330ATF0147: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-7988
Retaining Clamp Assembly

270357988
1547894: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-018-2671
Retaining Clip

270182671
6014043: RNCC: 2 | RNVC: 1

13 Nov 2003

5340-27-046-3275
Headless Straight Rod

270463275
8M10013: RNCC: 2 | RNVC: 1

29 Jul 2009

5340-27-029-0521
Retaining Clip

270290521
7691655: RNCC: 2 | RNVC: 1

27 Feb 2006

5340-27-019-8192
Utility Resilient Mount

270198192
DMA5276: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-0003
Mounting Plate

270280003
6040-0529-1016: RNCC: 2 | RNVC: 1

24 Nov 2005

5340-27-043-7121
Dust And Moisture Seal Protective Plug

270437121
DA0170484: RNCC: 2 | RNVC: 1

3 Dec 2008

5340-27-010-2936
Multiple Angle Bracket

270102936
10131YB0756: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-055-6105
Utility Resilient Mount

270556105
YC1523107BG: RNCC: 2 | RNVC: 1

16 Dec 2011

5340-27-014-8256
Metal Olmay Tampon

270148256
54RS750480: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-036-5179
Mounting Plate

270365179
5400039534: RNCC: 5 | RNVC: 9

12 Jun 2007

5340-27-006-0908
Elbow Catch

270060908
5K13667: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-040-3566
Dust And Moisture Seal Protective Plug

270403566
7703081227: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-044-4416
Dust And Moisture Seal Protective Cover

270444416
55700932: RNCC: 2 | RNVC: 1

5 Feb 2009

5340-27-048-1308
Mounting Plate

270481308
651948: RNCC: 2 | RNVC: 1

8 Jan 2010

5340-27-046-7461
Takma-Sokme Aparat

270467461
308-702: RNCC: 2 | RNVC: 1

5 Oct 2009

5340-27-051-3153
Mounting Plate

270513153
55RS065616: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-058-9300
Mounting Plate

270589300
VOE12744669: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-026-5955
Door Handle

270265955
10131YK2015: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-015-8255
Ispanyolet

270158255
02TMO1ISO1002: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-017-7004
Surgulu Destek

270177004
MKE 401 139: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-040-7926
Retaining Clip

270407926
MK402586: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-035-9982
Dust And Moisture Seal Protective Plug

270359982
51784936: RNCC: 2 | RNVC: 1

17 Apr 2007

5340-27-014-4496
Dust And Moisture Seal Protective Cover

270144496
IT DPCTK 0016: RNCC: 2 | RNVC: 1

21 Oct 2002

5340-27-009-6999
Metal Olmay Tampon

270096999
9181 C7: RNCC: 2 | RNVC: 1

17 Aug 2001

5340-27-045-6667
Tabela

270456667
1500X750X1.5 MM: RNCC: 2 | RNVC: 1

29 May 2009

5340-27-049-9770
Retaining Clip

270499770
7700429923: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-050-2658
Dust And Moisture Seal Protective Cover

270502658
301AD82: RNCC: 2 | RNVC: 1

13 Jul 2010

5340-27-025-2600
Teflonbant

270252600
TE-001025/8: RNCC: 2 | RNVC: 1

14 Feb 2005

5340-27-010-5494
Dust And Moisture Seal Protective Cover

270105494
92VB 3F617 DA: RNCC: 2 | RNVC: 1

30 Nov 2001

5340-27-028-1648
Dust And Moisture Seal Protective Plug

270281648
7703075120: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-027-3999
Dust And Moisture Seal Protective Cover

270273999
MB633897: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-023-1354
Retaining Clip

270231354
8K57699: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-059-9395
Utility Resilient Mount

270599395
5340ATFD0011: RNCC: 2 | RNVC: 1

10 Dec 2013

5340-27-012-4675
Dust And Moisture Seal Protective Plug

270124675
7703075310: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-012-8355
Dust And Moisture Seal Protective Cover

270128355
81.37106.5006: RNCC: 2 | RNVC: 1

26 Mar 2002

5340-27-023-8836
Kapak

270238836
7.11.03.33: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-021-1023
Esnek Mesnet

270211023
ETC4993-L: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-8666
Retaining Clip

270398666
7703179006: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-034-8733
Headless Straight Rod

270348733
13262951: RNCC: 2 | RNVC: 1

13 Feb 2007

5340-27-008-2369
Threaded Rod End

270082369
4688941: RNCC: 2 | RNVC: 1

22 Aug 2000

5340-27-044-9213
Retaining Clip

270449213
51819230: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-038-0598
Retaining Strap

270380598
377771437001: RNCC: 2 | RNVC: 1

12 Sep 2007

5340-27-006-5887
Resilient Mount Adapter

270065887
10000588: RNCC: 2 | RNVC: 1

9 Jan 2001

5340-27-038-0062
Dust And Moisture Seal Protective Cover

270380062
151060401: RNCC: 2 | RNVC: 1

10 Sep 2007

5340-27-016-7276
Retaining Clip

270167276
82459431: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-037-8964
Utility Resilient Mount

270378964
DA0032632: RNCC: 2 | RNVC: 1

4 Sep 2007

5340-27-039-9186
Retaining Clip

270399186
7701208834: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-012-0305
Retaining Clip

270120305
W700185 S300: RNCC: 2 | RNVC: 1

4 Jan 2002

5340-27-051-5050
Utility Resilient Mount

270515050
8200777542: RNCC: 3 | RNVC: 2

3 Nov 2010

5340-27-059-2390
Plaka

270592390
HS 008: RNCC: 2 | RNVC: 1

25 Jun 2013

5340-27-050-3924
Mesnet

270503924
272.73: RNCC: 2 | RNVC: 1

22 Jul 2010

5340-27-012-5283
Retaining Clip

270125283
7703079655: RNCC: 2 | RNVC: 1

7 Feb 2002

5340-27-028-7678
Dust And Moisture Seal Protective Cover

270287678
884-5810-944: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-044-7994
Retaining Clip

270447994
MU481269: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-009-7551
Retaining Clip

270097551
7703081180: RNCC: 2 | RNVC: 1

28 Aug 2001

5340-27-047-3056
Flans

270473056
38153: RNCC: 2 | RNVC: 1

19 Nov 2009

5340-27-023-3484
Kapak

270233484
05001FK0145: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-045-3432
Muhafaza

270453432
1010006637: RNCC: 2 | RNVC: 1

29 Apr 2009

5340-27-040-4641
Metal Takoz

270404641
5414046: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-016-0371
Metal Olmay Tampon

270160371
8549322: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-057-0655
Metal Kutu

270570655
UG 017000 POZ-1: RNCC: 5 | RNVC: 9

14 Jun 2012

5340-27-057-8904
Takma-Sokme Aparat

270578904
TD120812/5: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-029-0129
Retaining Clip

270290129
KLIPS,EL FREN HALATI: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-016-5566
Dust And Moisture Seal Protective Plug

270165566
8B70201: RNCC: 2 | RNVC: 1

4 Feb 2003

5340-27-046-7451
Takma-Sokme Aparat

270467451
205-332: RNCC: 2 | RNVC: 1

5 Oct 2009

5340-27-049-3926
Govde

270493926
1010FK-1911002: RNCC: 2 | RNVC: 1

28 Apr 2010

5340-27-049-6911
Adaptor

270496911
4256445: RNCC: 2 | RNVC: 1

20 May 2010

5340-27-044-4846
Koruyucu Kapak

270444846
12A14-76127-AA: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-055-8566
Hava Temizleme Elem

270558566
24008107: RNCC: 2 | RNVC: 2
24008107: RNCC: 5 | RNVC: 9

11 Jan 2012

5340-27-035-5986
Engine Accessory Bracket

270355986
3836307: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-029-3343
Engine Accessory Bracket

270293343
628295: RNCC: 2 | RNVC: 1

21 Mar 2006

5340-27-009-6729
Metal Olmay Tampon

270096729
9033 66: RNCC: 2 | RNVC: 1

15 Aug 2001

5340-27-018-6650
Mounting Plate

270186650
1010FK-3512804: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-9922
Retaining Bail

270249922
1009 1YK 0862: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-045-1145
Retaining Clip

270451145
MR975477HJ: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-039-5431
Retaining Clip

270395431
509700319001: RNCC: 2 | RNVC: 1

6 Dec 2007

5340-27-039-1513
Engine Accessory Bracket

270391513
965564: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-039-3194
Retaining Clip

270393194
8200376298: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-035-8038
Dust And Moisture Seal Protective Cover

270358038
476279: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-034-2212
Retaining Clip

270342212
15001YT9058: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-047-0701
Dust And Moisture Seal Protective Cover

270470701
13C00-72032-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-022-3406
Dust And Moisture Seal Protective Cover

270223406
57RS300925: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-054-2713
Casement Fastener

270542713
98020290: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-039-4535
Pawl Fastener

270394535
10131YK2065: RNCC: 2 | RNVC: 1

30 Nov 2007

5340-27-021-2872
Casement Fastener

270212872
10091KI0270: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-037-8958
Headless Straight Rod

270378958
M57044: RNCC: 2 | RNVC: 1

4 Sep 2007

5340-27-006-7004
Esnek [19560 Rekor

270067004
7K65510: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-012-9961
Retaining Clip

270129961
7645164: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-018-8921
Headless Straight Rod

270188921
11051YP0129: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-8023
Retaining Clip

270138023
6987 41: RNCC: 2 | RNVC: 1

25 Jul 2002

5340-27-038-1910
Engine Accessory Bracket

270381910
3829572-1: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-046-5250
Baglama Ayagi

270465250
901-ZP-6: RNCC: 2 | RNVC: 1

31 Aug 2009

5340-27-044-2719
Dust And Moisture Seal Protective Plug

270442719
81.96002-0495: RNCC: 2 | RNVC: 1

21 Jan 2009

5340-27-046-8572
Ka Makara Komplesi

270468572
HAREKETLI MAKARA: RNCC: 2 | RNVC: 1

16 Oct 2009

5340-27-003-9180
Montaj Vidasi

270039180
07001MN0645: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-009-1491
Kaucuk Tampon

270091491
4115452: RNCC: 2 | RNVC: 1

10 May 2001

5340-27-008-5050
Boru Dipligi

270085050
599903128009: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-021-7830
Helical Compression Spring Seat

270217830
27802: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-048-9711
Tasiyici

270489711
MP002558: RNCC: 2 | RNVC: 1

22 Mar 2010

5340-27-046-7449
Tutucu

270467449
308-701: RNCC: 2 | RNVC: 1

5 Oct 2009

5340-27-052-0629
Utility Resilient Mount

270520629
8200330447: RNCC: 3 | RNVC: 2

15 Dec 2010

5340-27-054-0544
Utility Resilient Mount

270540544
109916: RNCC: 2 | RNVC: 2

19 Jul 2011

5340-27-008-3533
Retaining Clip

270083533
7590446: RNCC: 2 | RNVC: 1
7590446: RNCC: 2 | RNVC: 1

25 Sep 2000

5340-27-045-0849
Retaining Clip

270450849
MS660225: RNCC: 2 | RNVC: 1

6 Apr 2009

5340-27-028-3278
Dust And Moisture Seal Protective Cover

270283278
71A00-72306-AA: RNCC: 2 | RNVC: 1

22 Dec 2005

5340-27-015-8138
Carpmali Vasistas M

270158138
VASISTAS: RNCC: 2 | RNVC: 1
02TM11DA01001: RNCC: 2 | RNVC: 1
02TM11DA01001: RNCC: 5 | RNVC: 2

11 May 2002

5340-27-009-8186
Nut And Bolt Locking Plate

270098186
45 6623 0886: RNCC: 2 | RNVC: 1

13 Sep 2001

5340-27-036-8733
Engine Accessory Bracket

270368733
863025: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-020-2094
Utility Resilient Mount

270202094
27829T: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-018-3393
Mounting Plate

270183393
10121YK5534: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-8295
Retaining Clip

270358295
7744124: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-040-3928
Dust And Moisture Seal Protective Plug

270403928
8200027479: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-021-2856
Utility Resilient Mount

270212856
1009.1KI.0264-2*2-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-1458
Pawl Fastener

270361458
12/50: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-058-2230
Headless Straight Rod

270582230
200826: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-039-9189
Retaining Clip

270399189
7701207662: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-026-8334
Dust And Moisture Seal Protective Cover

270268334
86FB8100GD: RNCC: 2 | RNVC: 1

4 Aug 2005

5340-27-023-4797
Manual Control Lever

270234797
AAMD4040: RNCC: 2 | RNVC: 1

3 Jul 2004

5340-27-037-4597
Retaining Clamp Assembly

270374597
969194: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-012-3632
Dust And Moisture Seal Protective Cap-Plug

270123632
KHT 9T516 AA: RNCC: 2 | RNVC: 1

25 Jan 2002

5340-27-026-3964
Retaining Clip

270263964
MS470067: RNCC: 2 | RNVC: 1

6 Jul 2005

5340-27-019-2178
Helical Compression Spring Retainer

270192178
10641037: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-9798
Dust And Moisture Seal Protective Cover

270349798
13C00-23104-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-055-5752
Retaining Strap

270555752
87557209: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-022-1323
Dust And Moisture Seal Protective Cap

270221323
1.HIBM-1I-2145: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-021-2870
Casement Fastener

270212870
1009.1KI.0232-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-010-2869
Multiple Angle Bracket

270102869
10131YS0847: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-021-2269
Mounting Plate

270212269
HJ5010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-0267
Extension Drawer Slide Section

270260267
16001YR0160: RNCC: 1 | RNVC: 2

20 May 2005

5340-27-008-3522
Retaining Clip

270083522
85013256: RNCC: 2 | RNVC: 1

25 Sep 2000

5340-27-045-3526
Plaka

270453526
302516: RNCC: 2 | RNVC: 1

30 Apr 2009

5340-27-019-1399
Buckle

270191399
8335TOKA9880005: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-3122
Retaining Clip

270583122
0490 6858: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-027-7822
Spring Holder

270277822
10121YY5587: RNCC: 2 | RNVC: 1

2 Nov 2005

5340-27-028-8584
Dust And Moisture Seal Protective Cover

270288584
MR144745: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-017-4023
Mounting Plate

270174023
1009.1IS.0066-41: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-3114
Dust And Moisture Seal Protective Cover

270213114
1206KMT0187: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-037-8044
Protection Bellows

270378044
BX2771145: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-021-5223
Mounting Plate

270215223
1010FK-3506111: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-7517
Dust And Moisture Seal Protective Cover

270357517
46818033: RNCC: 2 | RNVC: 1

27 Mar 2007

5340-27-005-1582
Manual Control Lever

270051582
1010001047: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1678
Lever Bracket

270051678
1010000808: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-0791
Dust And Moisture Seal Protective Cover

270540791
98021176: RNCC: 2 | RNVC: 2

21 Jul 2011

5340-27-048-9814
Mounting Plate

270489814
2ABEP01185: RNCC: 2 | RNVC: 1

23 Mar 2010

5340-27-044-7947
Retaining Clip

270447947
MN116613: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-045-0516
Dust And Moisture Seal Protective Cover

270450516
12A14-70123-AB: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-043-2293
Ara Parcasi

270432293
2ABEP00984: RNCC: 2 | RNVC: 1

21 Oct 2008

5340-27-008-8740
Retaining Clip

270088740
46449192: RNCC: 2 | RNVC: 1

6 Feb 2001

5340-27-015-1997
Utility Resilient Mount

270151997
10121HT0223: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-012-4536
Retaining Clip

270124536
7703079486: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-048-5204
Retaining Strap

270485204
HD160178SY: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-052-6008
Dust And Moisture Seal Protective Cover

270526008
15106502: RNCC: 2 | RNVC: 1

9 Feb 2011

5340-27-048-3057
Access Door Hinge

270483057
1010006894: RNCC: 2 | RNVC: 1

28 Jan 2010

5340-27-058-0332
Retaining Clip

270580332
CV71585: RNCC: 2 | RNVC: 1

3 Dec 2012

5340-27-034-5261
Retaining Strap

270345261
51RS201635: RNCC: 2 | RNVC: 1

17 Jan 2007

5340-27-047-6565
Retaining Clip

270476565
58RS501107: RNCC: 2 | RNVC: 1

11 Dec 2009

5340-27-047-6831
Runner

270476831
13C10-70080-AA: RNCC: 3 | RNVC: 2

14 Dec 2009

5340-27-014-3866
Dust And Moisture Seal Protective Cap-Plug

270143866
W702223 S300: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-014-3863
Dust And Moisture Seal Protective Cap-Plug

270143863
2T14 220156 AA: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-047-6735
Mortise Bolt

270476735
102-F490-7001-005-000-0: RNCC: 2 | RNVC: 1

14 Dec 2009

5340-27-022-8778
Dust And Moisture Seal Protective Plug

270228778
18161T: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-035-5271
Retaining Clamp Assembly

270355271
20440939: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-011-4922
Dust And Moisture Seal Protective Cover

270114922
7335710770: RNCC: 2 | RNVC: 1
7335710770: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-27-007-7723
Angle Bracket

270077723
10131YS0616: RNCC: 2 | RNVC: 1

16 Feb 2000

5340-27-055-0615
Headless Straight Rod

270550615
6000022787: RNCC: 2 | RNVC: 2

1 Nov 2011

5340-27-049-2094
Mounting Plate

270492094
1010FK-1911421: RNCC: 2 | RNVC: 1

13 Apr 2010

5340-27-054-9351
Mounting Plate

270549351
28100680: RNCC: 2 | RNVC: 1

24 Oct 2011

5340-27-025-9685
Dust And Moisture Seal Protective Cover

270259685
897855134051: RNCC: 2 | RNVC: 1

11 May 2005

5340-27-038-0287
Dust And Moisture Seal Protective Cover

270380287
20501977: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-022-8764
Spring Holder

270228764
2420222025: RNCC: 2 | RNVC: 1

30 Apr 2004

5340-27-056-8368
Montaj Ayak

270568368
2.HIBM-4H-0666/1/J-0003: RNCC: 2 | RNVC: 1

17 May 2012

5340-27-050-5164
Utility Resilient Mount

270505164
107065-3: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-017-3961
Mounting Plate

270173961
1009.1IS.0035-6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-042-3739
Pano Kilit

270423739
13865-1: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-012-9942
Dust And Moisture Seal Protective Plug

270129942
14507187: RNCC: 2 | RNVC: 1
20405722-8: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-021-4387
Mounting Plate

270214387
1009.1KI.0278-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3040
Retaining Bail

270213040
10131MT0192: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1711
Utility Resilient Mount

270491711
7700416460: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-27-014-4626
Retaining Clip

270144626
W700085 S300: RNCC: 2 | RNVC: 1

17 Oct 2002

5340-27-058-3194
Grooved Clamp Coupling Sleeve

270583194
200812: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-041-2903
Ara Parcasi

270412903
2ABEP00661: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-040-4811
Sleeve Spacer

270404811
2862371-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-009-6117
Dust And Moisture Seal Protective Cover

270096117
7771945: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-027-0681
Utility Resilient Mount

270270681
MR126800: RNCC: 2 | RNVC: 1

31 Aug 2005

5340-27-042-3720
Surgulu Kilit

270423720
45815: RNCC: 2 | RNVC: 1
45815: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-039-9818
Casement Fastener

270399818
897221355051: RNCC: 2 | RNVC: 1

2 Jan 2008

5340-27-009-4018
Retaining Clip

270094018
7700745001: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-053-3789
Mounting Plate

270533789
H341150802: RNCC: 2 | RNVC: 1

26 Apr 2011

5340-27-053-3799
Dust And Moisture Seal Protective Cover

270533799
505032026: RNCC: 2 | RNVC: 1

26 Apr 2011

5340-27-040-5156
Ara Parcasi

270405156
8709306: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-009-4801
Metal Olmay Tampon

270094801
7700834358: RNCC: 2 | RNVC: 1

12 Jul 2001

5340-27-049-2523
Kapak

270492523
203000-09-0: RNCC: 2 | RNVC: 1

15 Apr 2010

5340-27-025-0169
Tutucu

270250169
704322: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-042-1541
Utility Resilient Mount

270421541
7700428738: RNCC: 2 | RNVC: 1
7700428738: RNCC: 2 | RNVC: 1
7700428738: RNCC: 2 | RNVC: 1

22 Jul 2008

5340-27-045-3845
Door Handle

270453845
PR 026: RNCC: 2 | RNVC: 1
PR 026: RNCC: 5 | RNVC: 9

5 May 2009

5340-27-013-8030
Retaining Clip

270138030
6995 K3: RNCC: 2 | RNVC: 1

25 Jul 2002

5340-27-028-0845
Retaining Clip

270280845
7766301: RNCC: 2 | RNVC: 1

30 Nov 2005

5340-27-005-1739
Lock-Release Lever

270051739
1010001512: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-051-1676
Mounting Plate

270511676
YM868: RNCC: 5 | RNVC: 9

8 Oct 2010

5340-27-007-4727
Mounting Bracket

270074727
91AG F465A06 AB: RNCC: 2 | RNVC: 1

29 Nov 1999

5340-27-052-1670
Utility Resilient Mount

270521670
135X110X150 MM: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-027-8120
Mounting Plate

270278120
1501502067: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-057-7944
Headless Straight Rod

270577944
790983414080: RNCC: 2 | RNVC: 1
790983414080: RNCC: 5 | RNVC: 9

22 Oct 2012

5340-27-013-0529
Utility Resilient Mount

270130529
46759737: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-038-1675
Manual Control Lever

270381675
19270-35V10: RNCC: 5 | RNVC: 9

18 Sep 2007

5340-27-035-6488
Retaining Clip

270356488
7662194: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-009-4325
Dust And Moisture Seal Protective Cover

270094325
85015445: RNCC: 2 | RNVC: 1

4 Jul 2001

5340-27-027-0748
Key Blank

270270748
68095: RNCC: 2 | RNVC: 1

31 Aug 2005

5340-27-035-7393
Engine Accessory Bracket

270357393
3828852: RNCC: 2 | RNVC: 1

27 Mar 2007

5340-27-049-3976
Baglanti Parcasi

270493976
1010007037: RNCC: 2 | RNVC: 1

28 Apr 2010

5340-27-007-2480
Mounting Plate

270072480
3153711-1: RNCC: 2 | RNVC: 1

13 Jun 2001

5340-27-040-9406
Protection Bellows

270409406
M10.5.56: RNCC: 2 | RNVC: 1

11 Apr 2008

5340-27-021-1319
Utility Resilient Mount

270211319
10091KI0035-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-1663
Mounting Plate

270531663
740.06.10-01.A014: RNCC: 2 | RNVC: 2

5 Apr 2011

5340-27-004-6072
Rot Ucu Baslayici

270046072
10131YC0101: RNCC: 3 | RNVC: 2

15 May 1996

5340-27-040-0351
Kapak

270400351
16001YK0090: RNCC: 2 | RNVC: 1

3 Jan 2008

5340-27-017-3926
Retaining Bail

270173926
1009.1IS.0016-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-040-2913
Utility Resilient Mount

270402913
8200437464: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-054-4974
Retaining Clip

270544974
C06B01: RNCC: 2 | RNVC: 1

20 Sep 2011

5340-27-018-6619
Dust And Moisture Seal Protective Cap

270186619
1010FK-1911457: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-5909
Dust And Moisture Seal Protective Plug

270485909
SB150107Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-005-5899
Spring Holder

270055899
86VB-2472-AD: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-007-3469
Casement Fastener

270073469
W 703692 S300: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-045-6653
Doner Govd Tekerlek

270456653
TEKER 125.LIK: RNCC: 2 | RNVC: 1
TPTS1240: RNCC: 2 | RNVC: 1
TEKER 125.LIK: RNCC: 2 | RNVC: 1
TEKER 125.LIK: RNCC: 2 | RNVC: 1
3KVKR30015B: RNCC: 5 | RNVC: 9

29 May 2009

5340-27-005-1669
Mounting Bracket

270051669
1010002199: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-016-3318
Retaining Clip

270163318
6000046503: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-005-1760
Expansion Plug

270051760
1010002519: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-005-1511
Expansion Plug

270051511
1010000581: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-0625
Plaka

270480625
0116351: RNCC: 2 | RNVC: 1
1000X560X1.5 MM: RNCC: 5 | RNVC: 9

31 Dec 2009

5340-27-022-0254
Birlestirme Parcasi

270220254
9BM 5340-00015: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-012-4886
Retaining Clip

270124886
73NB17K008AA: RNCC: 2 | RNVC: 1
89FG 18572 JA: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-004-5106
Nut And Bolt Locking Plate

270045106
10121YK5055: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-053-5776
Dust And Moisture Seal Protective Cover

270535776
H349003744: RNCC: 2 | RNVC: 1
ME441132: RNCC: 2 | RNVC: 1

23 May 2011

5340-27-011-8205
Dust And Moisture Seal Protective Cap

270118205
8C114-2: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-017-3947
Mounting Plate

270173947
1009.1IS.0017-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-2605
Mounting Plate

270552605
UG 063000 POZ-18: RNCC: 2 | RNVC: 1
UG 063000 POZ-18: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-055-9395
Headless Straight Rod

270559395
D8056-1097754: RNCC: 2 | RNVC: 2

16 Jan 2012

5340-27-009-5651
Dust And Moisture Seal Protective Plug

270095651
60809133: RNCC: 2 | RNVC: 1

26 Jul 2001

5340-27-006-4190
Resilient Mount Adapter

270064190
10000505: RNCC: 2 | RNVC: 1

11 Mar 1999

5340-27-008-3144
Retaining Clip

270083144
4138439: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-005-7652
Double Angle Bracket

270057652
10131YB0511: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-055-3272
Utility Resilient Mount

270553272
84282368: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-013-2925
Retaining Clip

270132925
46803800: RNCC: 2 | RNVC: 1

28 May 2002

5340-27-054-3744
Dust And Moisture Seal Protective Plug

270543744
54 33 019 29R: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-012-9933
Dust And Moisture Seal Protective Plug

270129933
735290428: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-016-6847
Retaining Clip

270166847
6997 F6: RNCC: 2 | RNVC: 1

27 Feb 2003

5340-27-037-2037
Engine Accessory Bracket

270372037
471804: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-056-1665
Dust And Moisture Seal Protective Plug

270561665
6108080: RNCC: 2 | RNVC: 2

27 Feb 2012

5340-27-049-1446
Kapak

270491446
70291-1: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-041-0206
Kapak Tutucu

270410206
5-013-019: RNCC: 1 | RNVC: 2

21 Apr 2008

5340-27-038-5107
Koruma Parca

270385107
MM-7450-0045: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-029-6540
Retaining Clip

270296540
90467-09037-00: RNCC: 2 | RNVC: 1

27 Apr 2006

5340-27-045-0485
Mesnet

270450485
10046176: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-016-7375
Metal Olmay Tampon

270167375
98012979: RNCC: 2 | RNVC: 1

6 Mar 2003

5340-27-038-0323
Dust And Moisture Seal Protective Cover

270380323
1556289: RNCC: 2 | RNVC: 1

11 Sep 2007

5340-27-029-6319
Metal Olmay Tampon

270296319
5PS-83523-00-00: RNCC: 5 | RNVC: 9

26 Apr 2006

5340-27-037-4603
Retaining Clamp Assembly

270374603
952637-7: RNCC: 2 | RNVC: 1

1 Aug 2007

5340-27-049-1466
Kafes

270491466
70292-1/3: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-055-5876
Govde

270555876
1010007755: RNCC: 2 | RNVC: 1

13 Dec 2011

5340-27-040-4827
Sac Mahfaza

270404827
98000-0348: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-021-9890
Mounting Plate

270219890
1009 1AD 0027/2: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-020-8434
Dust And Moisture Seal Protective Cover

270208434
10111YL9010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-2726
Casement Fastener

270542726
98021777: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-052-3221
Kapak Kilit

270523221
7700756702: RNCC: 2 | RNVC: 1

6 Jan 2011

5340-27-050-6969
Utility Resilient Mount

270506969
8200267625: RNCC: 3 | RNVC: 2

19 Aug 2010

5340-27-016-7479
Retaining Clip

270167479
7677865: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-005-1547
Angle Bracket

270051547
1010001797: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-055-9018
Dust And Moisture Seal Protective Cover

270559018
YC151K011AB: RNCC: 2 | RNVC: 1

13 Jan 2012

5340-27-038-3122
Retaining Clip

270383122
894242034051: RNCC: 2 | RNVC: 1
894466382051: RNCC: 2 | RNVC: 1

28 Sep 2007

5340-27-007-9451
Metal Olmayan Takoz

270079451
7B70052: RNCC: 2 | RNVC: 1

27 Apr 2000

5340-27-022-0491
Birlestirme Parcasi

270220491
9BM 5340-00020: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-033-8511
Dust And Moisture Seal Protective Cover

270338511
12E50-16547-AA: RNCC: 2 | RNVC: 1

23 Nov 2006

5340-27-021-4225
Dust And Moisture Seal Protective Cap

270214225
07002YL0036: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-7094
Retaining Clip

270147094
7622606: RNCC: 2 | RNVC: 1

18 Nov 2002

5340-27-019-2177
Helical Compression Spring Retainer

270192177
10640006: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-5040
Retaining Clip

270085040
85011177: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-008-6741
Retaining Clip

270086741
46423766: RNCC: 2 | RNVC: 1

12 Dec 2000

5340-27-032-5096
Socket

270325096
05001DS0129: RNCC: 5 | RNVC: 9

26 Jul 2006

5340-27-033-0058
Metal Olmay Tampon

270330058
13C00-03771-AB: RNCC: 2 | RNVC: 1

9 Oct 2006

5340-27-016-3617
Spring Tension Clip

270163617
7700585645: RNCC: 2 | RNVC: 1

7 Jan 2003

5340-27-008-3223
Retaining Clip

270083223
14570180: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-022-5388
Retaining Clip

270225388
13057T: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-039-9176
Retaining Clip

270399176
7701207502: RNCC: 2 | RNVC: 1

27 Dec 2007

5340-27-054-1089
Retaining Clip

270541089
12460883: RNCC: 2 | RNVC: 2

26 Jul 2011

5340-27-022-5222
Retaining Clip

270225222
91558SD5003: RNCC: 2 | RNVC: 1
91558SD5003: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-27-021-4474
Mounting Plate

270214474
1009.1KI.0140: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-003-8244
Electronic Equipment Hardware Kit

270038244
3522-1475-4620: RNCC: 2 | RNVC: 1
3522-1475-4620: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-038-7664
Dust And Moisture Seal Protective Cap-Plug

270387664
5845S-47510: RNCC: 5 | RNVC: 9

31 Oct 2007

5340-27-053-0946
Helical Compression Spring Retainer

270530946
901-CD-86-A17: RNCC: 2 | RNVC: 1

28 Mar 2011

5340-27-040-1029
Flange Protector

270401029
9BM 5340-00656: RNCC: 2 | RNVC: 1

8 Jan 2008

5340-27-038-0100
Dust And Moisture Seal Protective Cover

270380100
32018-00H00: RNCC: 5 | RNVC: 9

10 Sep 2007

5340-27-029-1298
Dust And Moisture Seal Protective Cover

270291298
10121YK0532: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-022-1640
Utility Resilient Mount

270221640
35267: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-019-4982
Manual Control Lever

270194982
080200966400: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-9723
Key Blank

270269723
663710B: RNCC: 2 | RNVC: 1

16 Aug 2005

5340-27-051-0188
Utility Resilient Mount

270510188
8200549046: RNCC: 3 | RNVC: 2

24 Sep 2010

5340-27-012-1353
Dust And Moisture Seal Protective Plug

270121353
96FG 56051 AA: RNCC: 2 | RNVC: 1
30472T: RNCC: 2 | RNVC: 1

15 Jan 2002

5340-27-039-7052
Dust And Moisture Seal Protective Plug

270397052
20562189: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-015-6933
Mounting Plate

270156933
10091KI0129: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-2391
Plaka

270592391
HS 009: RNCC: 2 | RNVC: 1

25 Jun 2013

5340-27-056-8429
Mentese Kenar 12 Mm

270568429
MESAN 092 M-F-8-180: RNCC: 2 | RNVC: 1

17 May 2012

5340-27-022-1804
Mounting Plate

270221804
16HY1-304100.14: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-024-8083
Headless Straight Rod

270248083
1101201: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-012-4523
Retaining Clip

270124523
7703079146: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-056-6453
Utility Resilient Mount

270566453
ASVQ2000: RNCC: 2 | RNVC: 1
DM060200: RNCC: 2 | RNVC: 1

20 Apr 2012

5340-27-021-8374
Retaining Clip

270218374
90690GHB641: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-058-9005
Headless Straight Rod

270589005
VOE12739186: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-27-057-2469
Dust And Moisture Seal Protective Cap-Plug

270572469
2T14V290B03AC: RNCC: 2 | RNVC: 1

10 Jul 2012

5340-27-037-5219
Tutucu

270375219
24300-6K230: RNCC: 5 | RNVC: 9

2 Aug 2007

5340-27-037-2628
Double Angle Bracket

270372628
881607: RNCC: 2 | RNVC: 1

20 Jul 2007

5340-27-010-5586
Manual Control Handle

270105586
98VT V24185 AAW: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-039-3128
Retaining Clip

270393128
8200633108: RNCC: 2 | RNVC: 1

23 Nov 2007

5340-27-006-7484
Door Handle

270067484
8K65001: RNCC: 2 | RNVC: 1

22 Apr 1999

5340-27-027-1074
Mounting Plate

270271074
2ABM1MK0087: RNCC: 2 | RNVC: 1

5 Sep 2005

5340-27-004-3209
Rod End Connector

270043209
05001YM0049: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-012-4503
Retaining Clip

270124503
7703081120: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-013-4939
Retaining Clip

270134939
YC1H 19B632 EA: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-048-0943
Retaining Clip

270480943
7703079290: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-021-4270
Clamping Catch Fastener

270214270
P9903760: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1632
Mounting Bracket

270051632
1010000568: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-7956
Retaining Clip

270047956
10091YT5097: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-048-5252
Retaining Clip

270485252
HD172319Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-021-5076
Utility Resilient Mount

270215076
35L011: RNCC: 2 | RNVC: 1
35L011: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-0696
Dust And Moisture Seal Boot

270200696
P14: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-5127
Dust And Moisture Seal Protective Cover

270145127
83.67120.5500: RNCC: 2 | RNVC: 1

24 Oct 2002

5340-27-037-9222
Dust And Moisture Seal Protective Plug

270379222
51RS300679: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-024-4844
Mounting Plate

270244844
1009 1YH 0017: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-015-6961
Mounting Plate

270156961
10091KI0249: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-9910
Mermi Tutucusu

270219910
9910: RNCC: 2 | RNVC: 1
1010FG-1804483: RNCC: 2 | RNVC: 1
1010FG-1804483: RNCC: 5 | RNVC: 9

20 Jan 2004

5340-27-054-1373
Toz Koruyucu Kapak

270541373
22683180: RNCC: 3 | RNVC: 1

28 Jul 2011

5340-27-055-8574
Hava Temizleme Elem

270558574
24008202: RNCC: 2 | RNVC: 2
24008202: RNCC: 5 | RNVC: 9

11 Jan 2012

5340-27-045-1277
Dust And Moisture Seal Boot

270451277
795-00017: RNCC: 2 | RNVC: 2

9 Apr 2009

5340-27-003-8262
Electronic Equipment Hardware Kit

270038262
6040-0516-4002: RNCC: 2 | RNVC: 1
6040-0516-4002: RNCC: 3 | RNVC: 1

11 Dec 1994

5340-27-054-2912
Runner

270542912
98022027: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-046-8607
Casement Fastener

270468607
898005878051: RNCC: 2 | RNVC: 1

16 Oct 2009

5340-27-007-5148
Helical Compression Spring Seat

270075148
2420521001: RNCC: 2 | RNVC: 1

6 Dec 1999

5340-27-018-6243
Casement Fastener

270186243
1010FG-1800004: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-3847
Baglama Kanal

270403847
12326139: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-053-2593
Dust And Moisture Seal Protective Cover

270532593
897350995001: RNCC: 2 | RNVC: 1

13 Apr 2011

5340-27-015-6879
Mounting Plate

270156879
10091KI0026: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-008-6403
Mounting Plate

270086403
98000575: RNCC: 2 | RNVC: 1

7 Dec 2000

5340-27-056-1193
Mounting Plate

270561193
31300910: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-27-037-8955
Retaining Clip

270378955
DA0162978: RNCC: 2 | RNVC: 1

4 Sep 2007

5340-27-026-8637
Dust And Moisture Seal Protective Cover

270268637
PJYKP7100M: RNCC: 2 | RNVC: 1
PJYKP7100M: RNCC: 5 | RNVC: 9

8 Aug 2005

5340-27-021-1064
Utility Resilient Mount

270211064
05001DT0086: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-3859
Dust And Moisture Seal Protective Cap-Plug

270143859
W703090 S300: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-038-2955
Dust And Moisture Seal Protective Cover

270382955
897332330051: RNCC: 2 | RNVC: 1

27 Sep 2007

5340-27-056-4491
Mounting Plate

270564491
202887: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-037-9894
Permanent Magnet

270379894
061-06-102: RNCC: 2 | RNVC: 1

7 Sep 2007

5340-27-018-6334
Cushioning Pad

270186334
1010FG-0306167-11: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-2099
Mounting Plate

270222099
9BM 5340-00047: RNCC: 2 | RNVC: 1

19 Feb 2004

5340-27-008-6004
Baskili Ekran

270086004
9906-0128-7001: RNCC: 2 | RNVC: 1
9906-0128-7001: RNCC: 2 | RNVC: 1

22 Nov 2000

5340-27-012-1904
Dust And Moisture Seal Protective Cover

270121904
492602015A: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-017-4021
Mounting Plate

270174021
1009.1IS.0066-26: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-056-1781
Dust And Moisture Seal Protective Cover

270561781
98022338: RNCC: 2 | RNVC: 2

28 Feb 2012

5340-27-026-2151
Tutucu Kelepce

270262151
71B21-73090-AA: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-051-5051
Utility Resilient Mount

270515051
8200592642: RNCC: 3 | RNVC: 2

3 Nov 2010

5340-27-004-7949
Dust And Moisture Seal Boot

270047949
10091YD5041: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-046-3908
Tutucu Parca

270463908
MRC5153-L: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-025-3582
Mounting Plate

270253582
2ABM 1MK 0051: RNCC: 2 | RNVC: 1

4 Mar 2005

5340-27-006-1885
Elbow Catch

270061885
13H2376: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-034-3384
Dust And Moisture Seal Protective Cover

270343384
0012705870000: RNCC: 2 | RNVC: 1

25 Dec 2006

5340-27-004-7902
Double Angle Bracket

270047902
10091YC5010: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-013-3487
Retaining Clip

270133487
99VW 18D403 AA: RNCC: 2 | RNVC: 1

5 Jun 2002

5340-27-055-2604
Mounting Plate

270552604
UG 050000 POZ-16: RNCC: 2 | RNVC: 1
UG 050000 POZ-16: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-045-6655
Doner Govd Tekerlek

270456655
TPTS1035: RNCC: 2 | RNVC: 1

29 May 2009

5340-27-050-6724
Gosterge Tablasi

270506724
336E52: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-27-013-8031
Retaining Clip

270138031
6995 N1: RNCC: 2 | RNVC: 1

25 Jul 2002

5340-27-018-2399
Retaining Clip

270182399
27959T: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-048-9484
Retaining Clip

270489484
929527-21: RNCC: 3 | RNVC: 2

19 Mar 2010

5340-27-027-4349
Dust And Moisture Seal Protective Cap Set

270274349
850X680X85: RNCC: 2 | RNVC: 1

4 Oct 2005

5340-27-023-3696
Access Door Hinge

270233696
KABIN1: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-028-2934
Utility Resilient Mount

270282934
MC060203: RNCC: 2 | RNVC: 1

20 Dec 2005

5340-27-046-3031
Headless Straight Rod

270463031
1656141: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-058-3741
Dust And Moisture Seal Protective Cover

270583741
CV71806: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-017-3999
Mounting Plate

270173999
1009.1IS.0061-6: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-4617
Mounting Plate

270174617
H-39-4579-01: RNCC: 2 | RNVC: 1

26 Jun 2003

5340-27-058-5221
Kaucu Tampon Seridi

270585221
RESIM NO:2919-A: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-051-3225
Buckle

270513225
55RS860105: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-004-3227
Elastikli Mesnet

270043227
05001YK0215: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-018-6959
Manual Control Handle

270186959
1010FK-2810662: RNCC: 2 | RNVC: 1
1010FK-2810662: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-8195
Dust And Moisture Seal Protective Cap

270118195
1.HIBM-1H-651D01: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-052-2013
Dust And Moisture Seal Protective Cover

270522013
8.216.898.000.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-040-3950
Kapak

270403950
8200440: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-018-8745
Dust And Moisture Seal Protective Cap-Plug

270188745
11051YK0119: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-8978
Helical Compression Spring Seat

270238978
05001FT0087: RNCC: 2 | RNVC: 1

18 Aug 2004

5340-27-059-6956
Dust And Moisture Seal Protective Cover

270596956
24 V21 147 00: RNCC: 2 | RNVC: 1

1 Oct 2013

5340-27-028-5836
Retaining Clip

270285836
W703637S300: RNCC: 2 | RNVC: 1

18 Jan 2006

5340-27-037-2045
Engine Accessory Bracket

270372045
3837830: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-039-8671
Retaining Clip

270398671
8200107294: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-028-5005
Headless Straight Rod

270285005
7701474492: RNCC: 2 | RNVC: 1

5 Jan 2006

5340-27-041-3347
Picture Hanger

270413347
CERCEVE ASKILIGI,KUCUK: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-045-1147
Retaining Clip

270451147
MR653860: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-035-6104
Retaining Strap

270356104
72B04-78948-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-012-1842
Dust And Moisture Seal Protective Plug

270121842
88VT 7A137 CA: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-019-9258
Utility Resilient Mount

270199258
5360ATF0041: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-052-7812
Retaining Clip

270527812
74 99 996 30R: RNCC: 2 | RNVC: 2

23 Feb 2011

5340-27-053-1510
Retaining Clip

270531510
109701195351: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-054-2684
Casement Fastener

270542684
98022113: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-028-0960
Dust And Moisture Seal Protective Cover

270280960
72A22-75032-AA: RNCC: 2 | RNVC: 1

1 Dec 2005

5340-27-008-3538
Retaining Clip

270083538
60543078: RNCC: 2 | RNVC: 1

25 Sep 2000

5340-27-010-1229
Permanent Magnet

270101229
98001765: RNCC: 2 | RNVC: 1

6 Nov 2001

5340-27-026-8937
Retaining Clip

270268937
W703895S407: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-035-4372
Retaining Clip

270354372
46420090: RNCC: 2 | RNVC: 1

14 Mar 2007

5340-27-053-7479
Manual Control Handle

270537479
5428202: RNCC: 2 | RNVC: 1

14 Jun 2011

5340-27-012-9959
Retaining Clip

270129959
7630333: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-027-2251
Protection Bellows

270272251
2T144A084BA: RNCC: 2 | RNVC: 1

19 Sep 2005

5340-27-032-4906
Utility Resilient Mount

270324906
1707.15: RNCC: 2 | RNVC: 1

24 Jul 2006

5340-27-035-2993
Dust And Moisture Seal Protective Cover

270352993
71734528: RNCC: 2 | RNVC: 1

7 Mar 2007

5340-27-022-3402
Dust And Moisture Seal Protective Cover

270223402
57RS300924: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-053-5247
Dust And Moisture Seal Protective Cover

270535247
387019854001: RNCC: 3 | RNVC: 2

13 May 2011

5340-27-005-1646
Manual Control Handle

270051646
1010001838: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-023-0420
Protection Bellows

270230420
20615T: RNCC: 2 | RNVC: 1

14 May 2004

5340-27-029-7047
Dust And Moisture Seal Protective Plug

270297047
71B22-55076-AA: RNCC: 2 | RNVC: 1

3 May 2006

5340-27-011-0800
Dust And Moisture Seal Protective Cover

270110800
5340-49602-00028: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-058-6512
Dust And Moisture Seal Protective Plug

270586512
15211-11920: RNCC: 5 | RNVC: 9

5 Mar 2013

5340-27-027-0928
Protection Bellows

270270928
MD621006: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-045-1132
Retaining Clip

270451132
5725A076: RNCC: 2 | RNVC: 1

8 Apr 2009

5340-27-005-1649
Angle Bracket

270051649
1010002545: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-011-9989
Retaining Clip

270119989
91AB A66844 AC: RNCC: 2 | RNVC: 1

26 Dec 2001

5340-27-055-6315
Utility Resilient Mount

270556315
ASV-W2210-60: RNCC: 2 | RNVC: 2

20 Dec 2011

5340-27-058-2020
Pawl Fastener

270582020
63260-ZX2-C00: RNCC: 2 | RNVC: 1

20 Dec 2012

5340-27-039-1589
Engine Accessory Bracket

270391589
3594418: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-028-5631
Retaining Clip

270285631
46556415: RNCC: 2 | RNVC: 1

17 Jan 2006

5340-27-018-6999
Manual Control Handle

270186999
1010FK-2810717: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-7972
Dust And Moisture Seal Protective Cover

270097972
81.44312.0009: RNCC: 2 | RNVC: 1

11 Sep 2001

5340-27-025-9682
Dust And Moisture Seal Protective Cover

270259682
897855021101: RNCC: 2 | RNVC: 1

11 May 2005

5340-27-051-6192
Mounting Plate

270516192
303248: RNCC: 2 | RNVC: 1

10 Nov 2010

5340-27-057-5265
Utility Resilient Mount

270575265
ALTFC01216: RNCC: 2 | RNVC: 1

27 Aug 2012

5340-27-008-9700
Kaucuk Tampon

270089700
46520124: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-006-1134
Retaining Clip

270061134
CP106101: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-039-8689
Retaining Clip

270398689
7701056624: RNCC: 2 | RNVC: 1

25 Dec 2007

5340-27-022-1288
Dust And Moisture Seal Protective Cover

270221288
24724422000: RNCC: 2 | RNVC: 1
24724422000: RNCC: 5 | RNVC: 9

12 Feb 2004

5340-27-021-4441
Mounting Plate

270214441
1009.1KI.0221-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-4879
Dust And Moisture Seal Protective Plug

270264879
C2-5: RNCC: 2 | RNVC: 1

11 Jul 2005

5340-27-035-6496
Retaining Clip

270356496
46828358: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-016-7275
Retaining Clip

270167275
46516218: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-034-9394
Dust And Moisture Seal Protective Cover

270349394
710366: RNCC: 2 | RNVC: 1

16 Feb 2007

5340-27-014-6128
Dust And Moisture Seal Protective Cover

270146128
81.11145.0008: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-028-7673
Dust And Moisture Seal Protective Plug

270287673
16001YT0305: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-021-1143
Pawl Fastener

270211143
07002YK0217: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-2188
Retaining Clip

270232188
15492-5860: RNCC: 2 | RNVC: 1

8 Jun 2004

5340-27-057-4346
Retaining Clip

270574346
010120162800: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-014-8391
Utility Resilient Mount

270148391
7250441: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-7283
Utility Resilient Mount

270557283
47131603: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-009-6081
Metal Olmay Tampon

270096081
46419859: RNCC: 2 | RNVC: 1

2 Aug 2001

5340-27-059-2394
Plaka

270592394
HS 011: RNCC: 2 | RNVC: 1

25 Jun 2013

5340-27-015-8148
Zamak

270158148
018: RNCC: 2 | RNVC: 1
02TMO5IKO1001: RNCC: 2 | RNVC: 1

19 Aug 2003

5340-27-057-6347
Dust And Moisture Seal Protective Cap

270576347
ALTFC01325: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-012-9957
Retaining Clip

270129957
46542452: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-029-8149
Baglanti Elemani

270298149
XS4G9K478BC: RNCC: 2 | RNVC: 1

24 May 2006

5340-27-021-1303
Utility Resilient Mount

270211303
1009.1KI.0303-6*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-3616
Spring Tension Clip

270163616
7700589329: RNCC: 2 | RNVC: 1

7 Jan 2003

5340-27-022-8188
Dust And Moisture Seal Protective Plug

270228188
222411: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-025-1930
Spring Holder

270251930
5007857976: RNCC: 2 | RNVC: 1

27 Jan 2005

5340-27-009-0859
Mounting Plate

270090859
98001263: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-042-3892
Manual Control Lever

270423892
ALUMINYUM ISPANYOLET KOL: RNCC: 2 | RNVC: 1
666510: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-017-1871
Dust And Moisture Seal Protective Cap-Plug

270171871
58RS103561: RNCC: 2 | RNVC: 1

27 May 2003

5340-27-004-3255
Mounting Bracket

270043255
05001YT0050: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-026-3285
Retaining Clip

270263285
ME580723: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-026-1188
Sealing Plug Assembly

270261188
58RS501743: RNCC: 2 | RNVC: 1

6 Jun 2005

Load More Results